Marantz CC4001 CD Player User Manual
Contents
1. POWER ON STANDBY button When it is pressed the display window lights up and the power comes on When it is pressed again the display window is extinguished and goes into the standby status STANDBY indicator Lights up in red color while standby status Disc tray The disc to be played is placed on the tray Caution Close the tray by pressing the operation button not by pressing it in with your hand Remote sensor The infrared control signal emitted from the remote control unit is sensed here Display window This screen shows the operating status aaa gt P Track Skip Search buttons These buttons can be used as both track skip and track search buttons on the main unit only gt gt gt gt Each time this button is pressed the track being played is skipped forward When this button is continuously held down tracks are searched forward Fast Forward When this button is pressed the unit goes back to the beginning of the current track If the button is pressed more times the track being played is skipped back When this button is continuously held down tracks are searched backward Fast Rewind In program play Fast Forward and Fast Rewind can be done in the playing track only aaa u PAUSE button Press this2. 1 While the unit is stopped press PROGRAM button on the remote control unit to switch to the Program mode At this time PROGRAM blinks up Blink 5 PROGRAM a DISC TT MIN SEC LI CI er LL at a 2 Press DISC1 5 button on the main unit or remote control unit or DISC SKIP button on the main unit to choose a disc where the tracks to register are contained In this example choose disc 2 Blink 2 g PROGRAM At this state ALL is displayed if you press PROGRAM button without choosing track all tracks in the disc are registered 3 Press Haaa gt gt on the main unit or lt gt or Numerical button on the remote control unit to choose the track number to register In this example choose track 7 e At this time the chosen track number blinks Blink Blink e Here if m STOP button on the main unit or remote control unit is pressed the program is cancelled 4 Press PROGRAM button on the remote control unit to register the chosen track number At this time PROGRAM and track number displays change from blinking to light Light up Program number Light up cD PROGRAM TRACK _ II I 1 LI i 7 LI a 2 7 DISC Ye 15 ENGLISH CHECK THE PROGRAM CHANGE PROGRAMMED TRACKS example When tracks 3 5 and 7 of disc 1 are programmed change track 5 of disc 1 to track 7 of disc 3 BACK TO NORMAL PLAY WITHOUT CLEARING PROGR
3. Do not touch the back side shiny side of a 4 CD To play a single CD 8 cm place the disc with the indentation at the center of the tray 2 To set multiple discs press DISC SKIP button on the main unit With the turn table on the tray rotating set the disc one by one RANDOM AMS REPEAT DISCI DISC2 DISC3 DISC4 DISCS 3 Press 4 OPEN CLOSE button on the main unit or remote control unit to close the disc tray marantz REMOTE CONTROLLER RC4001C1 4 4 When gt PLAY button on the main unit or remote control unit is pressed playback starts from the first track Atthis time gt lights up on the display window e All discs are played example To start playback from the disc 2 Disc 2 first track gt gt last track Disc 3 first track last track Disc 4 first track last track Disc 5 first track last track Disc 1 first track last track Stop Caution Place a disc on each tray correctly If not the unit cannot be operated and discs may be damaged Be careful not to have your finger caught when you close the tray If the finger is caught press amp OPEN CLOSE button to open the tray Do not insert a disc in the way shown as the arrow Do not place any other media other than a disc on the tray Do not pile up discs
4. DISPLAY WINDOW Ld m zZ 72 T MP3 CD PROGRAM NIN _ a ID CID I is no Da Play indicator This lights during disc play u Pause indicator This lights when play is paused MP3 indicator This lights during MP3 play CD indicator This lights during Audio CD play PROGRAM indicator This lights during program play RANDOM indicator This lights during random play REPEAT indicator This lights during repeat play REMAIN indicator This lights while displaying track and disc remaining times 1 20 track number display Displays the number of tracks recorded in a disc the number of remaining tracks and the number of tracks programmed with program play e Cannot display more than 20 tracks O Time indicator Displays the time Track Number indicator Displays the track number chosen Remote Control indicator This lights during a remote control unit is operated Disc Number indicator Displays the disc number chosen Disc indicator Displays the disc numbers on the tray l NAMES AND FUNCTIONS REAR PANEL ENGLISH EXT INT External Internal switch When this unit is used as a standalone component set this switch to the INT side When it is used connected to external component by a remote connecting cable and to audio component with a remote sensor that supports remote con
5. tracks is displayed as To program multiple tracks repeat the step 2 to 4 to program all tracks to play Press gt gt PLAY button on the main unit or Press PROGRAM button Normal play will be started from the playing track 1 To check the program press RECALL button on the remote control unit twice while the unit is stopped to display track 5 of the disc 1 i i n the main unit or remote control unit to start the program play eo OM Bre mela URIO PROGRAM Normal play will start from the first track of the 2 chosen disc Press the Numerical button on the remote control unit Normal play will start from the chosen track To go back to program play again press PROGRAM button while the main unit is stopped and press PLAY button 16 2 Press DISC1 5 button on the main unit or remote control unit or DISC SKIP button on the unit to choose disc 3 cD PROGRAM ri l IIL 3 Press aaa gt e button on the main unit or lt gt or 1 9 button on the remote control unit to choose track 7 ay PROGRAM 5 ce g ea UI e When the track number is chosen with pressing 1 9 button on the remote control unit directly it automatically changes to that number 4 Press PROGRAM button on the remote control to change track 5 of the disc 1 to track 7 of the disc 3 cD PROGRAM TRA
6. In the case of a CD R or CD RW disc this problem may occur when the conditions under which its data was originally written were substandard or when the quality of the disc itself is poor This condition may occur in Mixed Mode CDs CD Extra and other discs that have CDDA format mixed with other data Noise may also be heard momentarily when skipping tracks Remote control operation is not possible Is the transmitter of the remote control unit RC4001CC pointed correctly at the remote sensor on the front of the player this unit See page 4 Are there any obstacles between Are the batteries in the remote control unit exhausted Is there another strong light striking the player s remote sensor Is EXT INT switch on the unit back panel set in the correct place See page 7 CD R CD RW disc cannot be played See page 2 Is the disc placed upside down Is the disc finalized correctly TOC written Is the recorded information music format CD DA or MP3 music data x A specific CD cannot be played Copy control CDs CDs with copy guard are special discs that do not comply with current CD standards Marantz cannot guarantee the ability to play such discs on your CD player When normal CDs can be played without a problem and problems occur only when playing these special discs it is not a problem with this unit Please ask the seller of the copy control CD for detailed information regarding copy con
7. With Program mode press STOP button on the main unit or remote control unit for 4 seconds or more to clear the whole program Or press amp OPEN CLOSE bution and open the disc tray to clear the whole program When the unit switches to standby or power off the programs are all erased 17 ENGLISH m zZ 72 T DISPLAY WINDOW BRIGHTNESS ADJUSTMENT SWITCHING PLAYING TIME DISPLAY DIMMER DISC4 DISCS maraniz REMOTE CONTROLLER RC4001 Each time DIMMER button on the remote control unit is pressed the display window brightness changes as follows 7 Bright gt Dim gt i 18 REMOTE CONTROLLER RC4001CC Each time TIME button on the remote control unit is pressed the display of the playing time changes as follows Elapsed time of playing track GEGRE z V x Li L m Ly Lit as an ao os Ba Remaining time of playing track cD y TRACK DI ta MIN SEC f J ID 7891 LI laity e 0 BeBe Go o 2 2 2 2 O O Remaining time of playing dis cD TRACOM I MIN SEC TOTAL Fte J 7 8 9 10 LUI IL yeaa teas 16 17 18 19 20 l la 2 7 DISC 2 Li Reman II I _I While playing MP3 the disc remaining time is displayed as With all disc random play disc remaining time displayed as e When a program is set up using tracks from only currently s
8. A DISC 13 PLAYING YOUR FAVORITE PARTS OF A TRACK i 13 SEARCH YOUR FAVORITE TRACKS AMS AUTOMATIC MUSIC SCAN PLAY 13 PLAYING TRACKS IN A RANDOM SEQUENCE RANDOM PLAY oseere 14 REPEAT PLAY SA 15 PLAYING TRACKS IN A SPECIFIC SEQUENCE PROGRAM PLAY n 15 BACK TO NORMAL PLAY WITHOUT CLEARING PROGRAM i 16 CHECK THE PROGRAM 16 CHANGE PROGRAMMED TRACKS rrkktitastrenarnanrraanrtannreant 16 CLEAR PROGRAMMED TRACKS 17 DISPLAY WINDOW BRIGHTNESS ADJUSTMENT 18 SWITCHING PLAYING TIME DISPLAY TROUBLE SHOOTING ais SPECIFICATIONS cissscteccncecccdadaccesccdsacccastanscvesnscccuccacddeacevedcvececctecedsncssstvbnsesad m zZ 72 INTRODUCTION PRODUCT FEATURES e MP3 File and CD R RW Play Compatible This unit can play back music CD format and CD R RW discs containing MP3 music data For restrictions about MP3 files please refer to PLAYING MP3 FILES e While Playing a disc four other discs can be changed e Direct Disc Access Button Direct Disc Access button is equipped both on the front panel of the unit and on the remote control unit for one touch disc change to any of the 5 discs in the unit e Various Play Modes such as Random Program Repeat and AMS Automatic Music Scan e Headphone Jack with Volume e RS 232C Control Port and IR Flasher Input
9. All Disc AMS Starts AMS play the first track of all discs on the disc tray one by one 525050 O Ses MPI Each time AMS button on the remote control is pressed the AMS play mode is switched as follows ie Track AMS All Disc AMS Off 1 All Track AMS Play Press AMS button on the remote control unit once to start AMS play all tracks automatically e At this time gt and TRACK blinks While stopped When All Track AMS is set while the unit is stopped every track of all discs is played as AMS play from the fist track of the chosen disc one by one example If All Track AMS is set while disc 2 is chosen Disc 2 first track last track Disc 3 first track last track Disc 4 first track last track Disc 5 first track last track Disc 1 first track last track Stop While playing When All Track AMS is set while the unit is playing every track is played as AMS play from the playing track one by one example If All Track AMS is set while track 3 of disc 3 is being played Disc 3 third track last track Disc 4 first track last track Disc 5 first track last track Disc 1 first track last track Disc 2 first track last track Stop AMS play will not be applied for the tracks finis
10. OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards There are however some installation and operation precautions which you should be particularly aware of 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth DONO AA WON apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over LA 13 Unplug this apparatus during l
11. on a tray Do not place more than two disc on a tray Do not force to open close the tray Always use 4 OPEN CLOSE button to open close the tray While the tray is open and rotating do not touch or stop the tray with fingers 11 ENGLISH PAUSE PLAYBACK STOP PLAYBACK CHANGE DISCS WHILE PLAYING You can change other discs not being played while playing a disc m zZ Dv T 4 OPEN CLOSE GD gt De l il PAUSE marantz marantz RC4001CC Disc 1 tray Nor Disc 2 tray Disc 3 tra DISC SKIP 4 OPEN CLOSE a 4 Disc 5 tray Pressing If PAUSE button on the main unit or Pressing m STOP button on the main unit or remote control unit pauses the play remote control unit stops the playback At this time Il lights up on the display window Track numbers e While disc 1 is playing press amp OPEN CLOSE To restart the playback press gt PLAY button button to open the tray and change disc 3 4 on the main unit or remote control unit and 5 Pressing Il PAUSE button on the main unit or To change disc 2 press DISC SKIP button to remote control unit again while pausing rotate the turn table on the tray then change restarts the playback the disc Lio After changing the disc make sure to press amp Total number of tracks Total playing tim
12. to play heart shaped or octagonal discs or discs with any other special shapes You may find that you cannot remove them or that some other kind of malfunctioning may occur in the player Use discs which satisfy the CD standards such as those with the CD logo or QSG mark on their disc label surfaces No guarantees are made for playback if discs which do not satisfy the appropriate CD standards are used Similarly no guarantees are made for their sound quality even if it is possible to play such discs To protect your discs from damage avoid placing them in the following locations Where they will be exposed to direct sunlight or where they will be close to a heater or other heat radiating appliance e Where the humidity level is high or it is very dusty Near a window or other such location where they may be exposed to rain Get into the habit of putting the discs back in their cases after use INAPPROPRIATE PLACES FOR INSTALLATION To keep your player in perfect working order for the longest possible time avoid installing the player in the following locations Wherever it will be exposed to direct sunlight e Wherever it will be close to a heater or other heat radiating appliance e Wherever the humidity is high or ventilation is poor e Wherever it is very dusty e Wherever it will be subject to vibration On top of a rickety stand or in an unstable location which is tilted at an ang
13. uses an optical lens so the condensation may form in the following cases In a room immediately after the heating has been turned on In a room where the humidity level is high When the player has been suddenly brought from a cold location into a warm room Since in cases like this the track numbers may not be read and the player is prevented from operating properly wait about 30 minutes and then operate the player This player may cause interference on a tuner or TV set If this is the case place it further away from the tuner or TV set Compact discs have much less noise than analog records and hardly any noise is heard before play starts Bear in mind therefore that if the volume control on the amplifier is set too high you will risk damaging other audio components Do not use commercially available lens cleaners as they may damage the lens USING REMOTE CONTROL UNIT E Cautions on handling batteries Misuse of the batteries can result in electrolyte leakage rupturing corrosion etc Bear in mind the following points when using batteries Remove the batteries from the remote control unit if the unit is not going to be used for a prolonged period a month or more Do not use an old battery together with a new one Insert the batteries while ensuring that their and poles are properly aligned with the corresponding markings on the remote control unit Batteries with th
14. while random play starts AMS play according to the Random mode Pressing aa lt gt gt gt gt while AMS play moves the playing track back and forth When Bb b gt gt i is pressed at the last track of the disc it moves to the next disc except the last disc e When AMS button is pressed after playing a track for 10 seconds or more AMS play is started from the next track AMS setup cannot be started while the tray is open during playback AMS playback is canceled if the tray is opened during AMS playback PLAYING TRACKS IN A RANDOM SEQUENCE RANDOM PLAY Random play is a function to play tracks in random sequence There are 2 modes for the Random play e One Disc Random Random play the chosen disc only All Disc Random Random play all discs on the disc tray DISC4 DISCS marantz REMOTE CONTROLLER RC4001CC RANDOM Every time RANDOM button is pressed the Random mode changes as follows per Disc Random gt All Disc Random gt Off E One Disc Random Play When RANDOM button is pressed on the main unit or remote control unit once starts the random play for one disc automatically Atthis time RANDOM 1 DISC lights up Track is chosen from the chosen disc randomly and played Light u TRACK MIN SEC a 2 II I e 818 eK LI GEGGE E All Disc Random Play When RANDOM button on the main unit or remote control unit is pre
15. AM To go back to normal play without clearing the program while playing the program do one of the followings Total playback time of the tracks programmed HSITSNA The programmed track numbers and total playing time of the programmed tracks are repeatedly displayed for approx 15 seconds When the track number is chosen with pressing the Numerical button on the remote control unit directly the chosen track is registered automatically PROGRAM button does not need to be pressed I RECALL EAT RANDOM AMS DISCI DISC2 DISCI DISC4 DISCS la PROGRAM Le TRACK maraniz Vans tani A DISC MI MI IT MIN SEC 1 5 i i DISCI DISC2 DISC3 4 m fs I uni 7 10 RANDOM AMS REPEAT Z l Ll _l in al tI La DISC 1 Disc2 DISC3 pene pecs 2 DISC 4 DISC 5 DISC1 5 marantz Total number of programs Ha par time A Press RECALL button anda remota control unit a REMOTE coNTROLLER ING Teens programme REMOTE CONTROLLER the Program mode when PROGRAM is blinking or lights If the total playback time of the tracks programmed exceeds 99 minutes 59 seconds e Each time RECALL button is pressed the a 1 is displayed DISC1 5 gt PLAY programmed tracks are displayed one by one e When a program is setup with an MP3 disc 1 is displayed for the total time e When the tracks of a disc that is not selected is programmed the total playing time of such
16. CK a 2 ey DISC 2 O Lit e 2 I a PROGRAM DISC TA MIN SEC D 7 A 7 oI Lil AGE JU cD PROGRAM Ci a MIN SEC 3 CUI i le 2 oy DISC 2 O Total number of programs Total playback time of the tracks programmed e In this example as a track on a disc that is not selected is included in the program is displayed for the total playback time for the programmed tracks CLEAR PROGRAMMED TRACKS E To Clear One Track at a Time E STOP DISC4 DISCS marantz REMOTE CONTROLLER RC4001CC With Program mode press E STOP button on the main unit or remote control unit to clear the programmed tracks one by one from the last track E To Clear Chosen Track 2 RANDOM AMS REPEAT DISCI DISc2 DISC3 DISC4 DISCS marantz REMOTE CONTROLLER RC4001 With Program mode press RECALL button on the main unit or remote control unit to switch to Check mode of the program Display the track number or disc number to clear With displaying the track number or disc number to clear press E STOP button on the main unit or remote control unit to clear the chosen track number E To Clear Whole Program AOPEN CLOSE E STOP RANDOM AMS REPEAT DISCI DISC2 DISC3 DISC4 DISCS marantz REMOTE CONTROLLER RC4001C
17. Numerical button 2 on the remote control unit at a time for five seconds or more To set CODE3 Press RECALL button and Numerical button 3 on the remote control unit at a time for five seconds or more To set CODE4 Press RECALL button and Numerical button 4 on the remote control unit at a time for five seconds or more To set CODE5 Press RECALL button and Numerical button 5 on the remote control unit at a time for five seconds or more Caution To reset the remote control to CODE1 press RECALL button and Numerical button 1 on the remote control unit at the same time for five seconds or more PROGRAM RECALL marantz REMOTE CONTROLLER Rca001cC To synchronize the remote control code of the CC4001 with the remote control unit press the PROGRAM and RECALL buttons on the remote control unit together The remote control code set is displayed on the display window for two seconds and the setting is completed e When the remote control unit is set to CODE2 e When the remote control unit is set to CODE3 cD DISC BEES LL gt m4 ton gun Douw pros Baza e When the remote control unit is set to CODE4 1 cD DISC BEEGC m zZ 72 T CONNECTIONS Depending on your amplifier receiver Stereo System there are various ways to connect to this player For correct connection please refer to instruction manuals of stereo system to
18. RS 232C port which supports both unit control and operating status transmission is equipped to enable central control with custom installation Also Flasher input is equipped to realize wired control when you cannot use remote control due to the installation on the rack etc e 5 Sets of Built In Remote Control Codes Because there are 5 sets of built in remote control code signals for between the unit and remote control unit up to 5 units installed in the same place can be remotely controlled independently e Aluminum Front Panel Hairline finish aluminum front panel is used for quality look APPLICABLE DISCS TO THE UNIT COMPACT Audio CD CDDA DIGITAL AUDIO Audio CDs contains music tracks only CD R COMPACT DIGITAL AUDIO CD RW COMPACT DIGITAL AUDIO ReWritable PLAYING CD R CD RW DISCS This unit can play back the CD RW ReWritable discs as well as ordinary Audio CD and CD R Recordable discs e This unit can play back music CD format and CD R CD RW discs which contain MP3 music data However some discs may have problems such as unable to play noise or sound distortion For details please read the instruction manual provided with a CD recorder The CD R and CD RW discs should contain properly recorded TOC information so that they can be played back In CD recorders the task of writing TOC information is referred to as finalizing the disc Discs that are not finalized cann
19. TO THE UNIT ok DE PLAYING CD R CD RW DISCS n sai Your Marantz product has been prepared to PLAYING MP3 FILES comply with the household power and safety RE a ear requirements that exist in your area BEFORE USING ccscscccscesessesnsssssensececeseusesnsensescecneegeseususessesuasescsggegesusseseens CC4001 can be powered by 120V AC only NOTES FOR REMOVING SHIPPING SCREWS NOTES ABOUT THE DISCS 1 crac 3 INAPPROPRIATE PLACES FOR INSTALLATION i 3 COPYRIGHT PRECAUTIONS aeriana a E i 4 Recording and playback of any material may USING REMOTE CONTROL UNIT o 4 aa For further information refer to the LOADING BATTERIE Siipeni iE n 4 Copyright Act 1956 NAMES AND FUNCTIONS reina 5 Mramaticand Musical Parfsnmais Au 1068 FRONT PANE meon a i n 5 Performers Protection Acts 1963 and 1972 DISPLAY WINDOW kanienn nana AAN 6 Any subsequent statutory enactments and REAR PANEC i ia i i ENE 7 orders REMOTE CONTROLLER sn ai 8 REMOTE CONTROL CODE SETTING 9 CONNECTIONS i initial iaveseatcdeveceededevuecedsueansedeacudduassas 10 OPERATION aE a A aaa aa Er aa aaee AANA ACRAS 11 CONNECTING THE POWER SUPPLY AND TURNING ON i 11 NORMAL PLAYBACK ttk t 1ku strt arkka nru nAra AEEA AEEA EEES EEEE EEan EEan reann renren 11 PAUSE PLAYBACK ovom lA e ia 12 STOP PLAYBACK nioun ranae AAA a 12 CHANGE DISCS WHILE PLAYING 12 PLAYING YOUR FAVORITE TRACKS OF
20. be connected Caution Do not connect audio output from this unit to PHONO input of your audio system 1 Connect the audio cable to this unit s Analog Audio outputs and the stereo inputs on your amplifier receiver or stereo system 2 Connect the optical cable coaxial cable to the digital input on your AV amplifier D A converter CD Recorder etc 10 To Analog Audio output To Digital Audio output Optional Optional Audio cable Supplied To audio input terminals on r amplifier Marantz srono wunen Connect to digital input terminals of AV amplifier D A converter or CD recorder etc Left speaker Right speaker remote control unit to open the disc tray Hold 1 Press 4 OPEN CLOSE button on the unit or the edge of the disc and place on the tray CONNECTING THE POWER NORMAL PLAYBACK SUPPLY AND TURNING ON Plug the power cable into AC Power Input jack on the rear panel OPERATION 2 Turn on the power switch of the audio unit amplifier etc that is connected with this unit Set the selector on the connected unit to this unit 3 Plug the power cable into an AC outlet 4 Turn the power on by pressing POWER ON STANDBY button on the unit or ON button on the remote control unit The unit repeats switching from ON and Standby every time the POWER ON STANDBY button is pressed
21. button to pause playback If pressed again the unit returns to playback 12 m STOP button Press this button to stop playback Also this button is used to clear programs gt PLAY button Press this button to start playback 4 OPEN CLOSE button Press this button to open the tray Put on a disc with label side up Press the button again to close the tray Caution Do not press the disc tray in by hand This may cause malfunction RANDOM button Playback tracks randomly See page 14 REPEAT button Playback a track or disc repeatedly Use this button also to switch to the Repeat mode One Track Repeat One Disc Repeat and All Disc Repeat See page 15 14 15 16 1 5 Disc Select button Choose a disc to play DISC SKIP button When this button is pressed while multiple discs are placed on the tray a disc to play can be chosen with rotating the tray clockwise When this button is pressed while the tray is open the turn table in the tray rotates so that the disc can be replaced PHONES headphones jack The headphones are connected to this jack Caution Use headphones with a standard plug LEVEL headphone volume control This control is used to adjust the headphone volume Turn it clockwise to increase the headphone volume ENGLISH NAMES AND FUNCTIONS
22. can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged This Class B digital apparatus complies with Canadian ICES 003 to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user s authority to operate the equipment Cet appareil numerique de la Classe B est conforme a la norme NMB 003 du Canada CONTENTS FOREWORD if FOREWORD i iui 1 This section must be read before any connection is E EQUIPMENT MAINS WORKING SETTING ns 1 made to the mains supply a COPYRIGHT ii 1 gt TT INTRODUCTION nn EQUIPMENT MAINS WORKING PRODUCT FEATURES oniiir SETTING APPLICABLE DISCS
23. d Before using the player turn these screws counterclockwise and remove them If the shipping screws are still in place and the power is turned on unplug the power cord from the power outlet and remove the shipping screws Retain these screws as they will be needed when the player is transported Before transporting the player take out the discs close the disc tray set to standby mode and unplug the power cord from the power outlet Then install the shipping screws by turning them clockwise Be sure to fasten them securely shipping screws NOTES ABOUT THE DISCS Handle the discs carefully so as not to scratch their surfaces Keep the surfaces of the discs clean at all times When cleaning the surfaces of discs always be sure to use the special cleaner and wipe the surfaces in the directions shown in the figure below e Wipe the surface radially from the center Do not wipe the surface in the circumferential direction Do not attach pieces of paper or stickers to the label surfaces of the discs When a disc has a piece of plastic tape or rental CD label with paste protruding from the edge or when a disc still bears traces of sticky tape or adhesive labels do not attempt to play it If such a disc is played on the CD player you may find that you cannot remove it or that some other kind of malfunctioning may occur Do not use discs which come in special shapes Do not attempt
24. e OPEN CLOSE button to close the disc tray 12 PLAYING YOUR FAVORITE TRACKS OF A DISC PLAYING YOUR FAVORITE PARTS OF A TRACK RANDOM AMS REPEAT DISCI DISC2 DISCS DISC4 DISCS marantz REMOTE CONTROLLER RC4001CC 1 Press DISC1 5 button on the main unit or remote control unit to choose the disc to play At this time the first track of the chosen disc is played 2 Press mea gt gt gt button on the main unit or lt gt or 0 9 button on the remote control unit to choose the track number to play example e To choose the 9th track Press 9 e To choose the 23rd track Press 2 and within 2 seconds press 3 e To choose the 123rd track Press 1 within 2 seconds press 2 and within 2 seconds press 3 REMOTE CONTROLLER RC4001CC Hold lt b gt button on the remote control unit or l d 1 lt gt gt gt gt button on the main unit while playing to search the part to play Release the button when you have found the part SEARCH YOUR FAVORITE TRACKS AMS AUTOMATIC MUSIC SCAN PLAY AMS Automatic Music Scan play is a function to play 10 seconds of each track s beginning one by one It is a useful function when you need to search a track to play There are 2 modes for the AMS play e All Track AMS AMS plays all tracks of all discs on the disc tray
25. e same shape may have different voltages Do not use different types of batteries together If electrolyte has leaked thoroughly wipe the inside of the battery compartment and then insert new batteries e When batteries which are no longer required are to be discarded follow the directions regulations laid down by the local authorities in the area concerned for their disposal LOADING BATTERIES Batteries in this remote control unit have a life of approximately 1 year under normal operating conditions If the remote control unit is not going to be used for an extended period of time remove the batteries Also if you notice that the batteries are starting to run down replace them as soon as possible O Remove the battery cover Insert the batteries with correct orientation D Two AA size batteries E Remote control Operate the remote control unit RC4001CC within a distance of approx 5 m from the infrared signal reception window remote sensor on the front of the CD Changer Remote control operation may not be possible if the remote control unit s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor Remote control operating range Approx 16 4 ft 5m Remote control unit RC4001CC NAMES AND FUNCTIONS FRONT PANEL
26. elected disc the amount of time remaining in the program is displayed Except for MP3 discs When a program is setup with discs that are not selected is displayed for the total program time If the total playback time of the tracks programmed exceeds 99 minutes 59 seconds a is displayed for the remaining program time TROUBLE SHOOTING If you think a malfunction has occurred first check the points listed below The problem is likely to have been caused by a simple operational error If the problem cannot be corrected even after carrying out the following checks consult your dealer or nearest Marantz sales office or service counter The disc fails to rotate 1 2 3 4 Nooo Is the AC Power cord plugged in properly Is the POWER ON STANDBY switch ON Is the disc placed in the correct position Is the disc placed properly with the label side facing up Is the disc dirty Is the disc scratched Is the disc warped The disc is rotating but no sound is heard Are the amplifier and speakers connected properly Is the amplifier switch ON Is the amplifiers function or selector switch set to CD or AUX or such or whatever you have connected this unit to Is the amplifier s volume control set at the minimum level The disc stops in mid operation The sound drops out or noise is heard Is the disc dirty Is the disc scratched Is the disc warped
27. gt gt Track Skip buttons lt q When this button is pressed the unit goes back to the beginning of the current track If the button is pressed more times the track being played is skipped back Each time this button is pressed the track being played is skipped forward Search buttons are provided separately for the remote control unit Use 6 Search buttons for search function 10 11 12 13 lt lt gt gt Search buttons lt lt While this button is pressed during playback the track is searched backward bb While this button is pressed during playback the track is searched forward RANDOM button Playback tracks randomly See page 14 DISC1 DISC5 Disc Select button Choose a disc to play REPEAT button Playback a track or disc repeatedly Use this button also to switch to the Repeat mode One Track Repeat One Disc Repeat and All Disc Repeat See page 15 ANS Automatic Music Scan button Use this button for AMS play See page 13 m STOP button Press this button to stop playback Also this button is used to clear programs Il PAUSE button Press this button to pause playback If pressed again the unit returns to playback gt PLAY button Press this button to start playback l 14 RECALL button Use this button to check the prog
28. h xHeight x Depth 17 5 16 x 4 1 2 x 16 ins 440 x 114 x 404mm Netweloht s ili cai 6 9kg Accessories e Remote control unit RC4001CC ie 1 Unit inch mm AA Batteries lt AG POW6er cordi cos ana nasali lisina ee Sere 1 olleke Elo s PESETA TT AT TTA aa daria fera 1 Remote Connection Cable AAA AAA AAA AA AA ANES Einara 1 WS ONS GUIS 2 cesses niro iena capirai E ine 1 e Warranty Card USA e Warranty Card CANADA ankn t unk nt AA EANEAAANEAEAEANEAEANEA NENEA EnEn EnnE nanenane 1 Specifications subject to change without prior notice 20 www marantz com You can find your nearest authorized distributor or dealer on our website mm a Fa Mm Zz j is a registered trademark Printed in China 05 2006 00M08CW851250 mzh d
29. hed playing AMS play will not be applied for the first and second tracks of disc 3 in this example Press gt PLAY button on the main unit or remote control unit when the track to play is found Normal play will start from that track 13 ENGLISH E All Disc AMS Play Press AMS button on the remote control twice to start AMS play all discs automatically e At this time gt and DISC blinks While stopped When All Disc AMS is set while the unit is stopped every first track of all discs is played as AMS play from the fist track of the chosen disc one by one example If All Disc AMS is set while disc 1 is chosen Disc 1 first track Disc 2 first track Disc 3 first track Disc 4 first track Disc 5 first track Stop While playing When All Disc AMS is set while the unit is playing every first track of all discs is played as AMS play from the next track of the playing track one by one example If All Disc AMS is set while track 3 of disc 4 is being played Disc 4 third track Disc 5 first track Disc 1 first track Disc 2 first track Disc 3 first track gt Stop 14 E Stop AMS Play To stop the AMS play press the AMS button on the remote control unit once or twice until the blinking gt gt lights up Caution Pressing AMS button while setting a program starts AMS play for the only tracks programmed e When AMS button is pressed
30. ightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Additional Safety Information e This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to e Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus e When the switch is in the OFF position the apparatus isn t completely switched off from the MAINS e The equipment shall be installed near the power supply so that the power supply is easily accessible Do not block any ventilation openings Install in accordance with the manufacture s instructions Do not install near any heat sources such as radiators heat registers stoves or other NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and
31. kbps and stored on a CD R RW disc with a capacity of 650 MB According to copyright law use of recorded material other than for personal listening etc without permission from the copyright owner is prohibited NOTES This unit is compatible with the MP3 file specifications shown in the table below Playback of MP3 files based on specifications other than those shown in the table below cannot be guaranteed File type Extension MP3 mp3 pa ISO9660 Level 1 Writing program s format 1509660 Level 2 umber of folders that can be recognized per disc maximum99 Number of tracks that per folder maximum255 can be recognized _ per disc maximum999 A Constant bitrate 32kbps 320kbps 8 kHz MPEG2 5 audio layer 3 11 025 kHz MPEG2 5 audio layer 3 MPEG2 5 audio layer 3 MPEG2 audio layer 3 MPEG2 audio layer 3 MPEG2 audio layer 3 Sampling frequency MPEGI audio layer 3 MPEGI audio layer 3 MPEGI audio layer 3 Generally speaking the higher the MP3 file s bit rate the better the sound quality With this unit it is recommended to use MP3 files written with a bit rate of 128 kbps or greater This unit is compatible with variable bit rate In variable bit rate time display may not be appeared properly The writing program may change the positions of the folders and files when writing the MP3 files on the CD R RW disc so the files may not be played in the e
32. le e In an audio rack with little space at the top and bottom or other location where the heat dissipation will be obstructed To ensure proper heat dissipation install the player while leaving clearances between the player and wall or other components as shown in the figure below e On top of an amplifier or other component which dissipates a great deal of heat The quality of the laser and other components can be harmed if the player is placed directly on top of an amplifier or other device which generates heat 4 ins 0 1 m or more E Do not place objects on top Refrain from placing any objects on top of the player ENGLISH m zZ 72 T E Cautions on handling power cord Do not touch the power cord with wet hands e When disconnecting the power cord always make sure that you take hold of the plug Yanking out or bending the cord can damage it and or cause electric shocks or a fire e Get into the habit of disconnecting the power plug before leaving home E Do not attempt repairs yourself e Refrain from lubricating the player doing so can cause malfunctioning e Only qualified engineers with specialized expertise are authorized to repair the pick up and parts inside the player PRECAUTIONS In winter droplets of water form on the insides of the windows of a heated room this is called condensation This player
33. maranliz Model CC4001 User Guide 5 Disc CD Changer CLASS 1 LASER PRODUCT COMPACT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT DIGITAL AUDIO CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL AN A The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON DANTE DE LA PRISE ET POUSSER JUSQU AU FOND LASER SAFETY This unit employs a laser Only a qualified service person should remove the cover or attempt to service this device due to possible eye injury CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE
34. oaxial digital input using an optional coaxial digital cable DIGITAL AUDIO OUT OPTICAL This jack is to be connected with a recording device amplifier D A converter etc that has optical digital input using an optional square type optical digital cable Flasher Input jack A control port for professionals custom installers This is used to control the unit from other rooms using keypad etc AC Inlet Connect the supplied power cord to this jack and a household AC power outlet m zZ Dv T NAMES AND FUNCTIONS REMOTE CONTROLLER marantz REMOTE CONTROLLER RC4001CC 2 OPEN CLOSE TIME DIMMER 17 pea CO CH 4 i lessi LL 6 gt Gr T 7 RANDOM AM 7a 9 DISC 1 CI 8 DISC4 DISCS ON button When this button is pressed while the unit is in standby status the power of the unit is turned on STANDBY button When this button is pressed while the power is on the unit goes into the standby status 4 OPEN CLOSE button Press this button to open the tray Put on a disc with label side up Press the button again to close the tray Caution Do not press the disc tray in by hand This may cause malfunction PROGRAM button This button is for program play See page 15 ma
35. ot be properly recognized as an Audio CD and played back by regular CD players and Super Audio CD players For details please read the instruction manual provided with a CD recorder TOC stands for Table Of Contents and contains information such as the total number of tracks and total playing time of the disc e This unit can play only the discs recorded in the CD DA format designed for music reproduction Do not attempt to play a disc containing other data such as a CD ROM for PCs on this unit As the playback of a CD RW disc necessitates partial change of the player setup it may take longer time for reading the TOC information than when an Audio CD or CD R disc is played PLAYING MP3 FILES There are many sites on the Internet from which you can download music files in MP3 format These files can be downloaded following the instructions on the site and stored on CD R RW discs which can then be played on the this unit The music on commercially available music CDs can be converted into MP3 files on a computer using MP3 encoding programs When this is done the data is reduced to approximately 1 10 the original size This MP3 data can then be stored on a CD R RW disc allowing you to create a single 12 cm CD R RW disc containing about 10 times more music than a normal music CD that is some 100 tracks or more This is an approximately value for MP3 files of tracks about 5 minutes long converted at a standard bit rate 128
36. rammed tracks while programming or stopped programming See page 16 0 9 Numerical buttons Use these buttons to choose tracks and to input track number in each mode TIME button This button is used to switch the time display Each time it is pressed the displayed time cycles from track elapsed time track remaining time total remaining time gt track elapsed time See page 18 DIMMER button This button is used to adjust the brightness of the display window l NAMES AND FUNCTIONS z am REMOTE CONTROL CODE E Remote Control Unit Setting M CC4001 Setting Display Examples D When the remote control unit is set to CODE1 wl SETTING g m a wo cp e The unit and remote control unit have five sets ey z of built in remote control codes for each These GOOG n nisc Li i DEES codes enable up to five CC4001s installed in 4 5 o LUI ti 1a 18 1416 the same place to be controlled independently aa To use multiple units at the same time set the second third forth and fifth CC4001s and their remote control units remote control codes To set the codes follow the procedure below to control only selected unit is remotely controlled At the factory the unit and remote control unit were set to CODE1 PROGRAM RECALL O C RECALL RANDOM AMS REPEAT Disci Dsc2 DISCS Disca DISCS marantz REMOTE CONTROLLER RC4001CC To set CODE2 Press RECALL button and
37. ssed twice starts the random play for all discs automatically At this time RANDOM DISC lights up A track is chosen from all discs and played After playing the track another track is chosen from all discs randomly and played Light RANDOM DISC E Stop Random Play To stop random play press m STOP button on the main unit or the remote control unit Or press RANDOM button on the main unit or on the remote control unit once or twice until RANDOM disappears Caution e When RANDOM button is pressed while a program is being played programmed tracks are played in random sequence If amp OPEN CLOSE button is pressed during random playback and the tray is opened random playback is canceled e Random playback cannot be started while the tray is open during playback REPEAT PLAY Repeat play is a function to automatically play repeatedly There are 3 modes for the Repeat play One Track Repeat Play the chosen track repeatedly One Disc Repeat Play the chosen disc repeatedly All Disc Repeat Repeat play all discs on the disc tray DISC4 DISCS marantz REMOTE CONTROLLER C4001 REPEAT 0 6 6 6 5 D CJ lo 52 MPI o Cono CT Every time REPEAT button is pressed the Repeat mode changes as follows is Track Repeat One Disc Repeat 7 Off lt All Disc Repeat E One Track Repeat Play Af
38. ter choosing a track to repeat press REPEAT button on the main unit or remote control unit once to play the chosen track repeatedly Atthis time REPEAT 1 lights up Light up E One Disc Repeat Play After choosing a disc to repeat press REPEAT button on the main unit or remote control unit twice to play the tracks of the chosen disc repeatedly Atthis time REPEAT 1 DISC lights up Light up E All Disc Repeat Play When REPEAT button on the main unit or remote control unit is pressed three times all discs are played repeatedly e Atthis time REPEAT 1 DISC lights up Light up gt cD TRACK rt I MIN SEC LI REPEAT DISC GEGGG E Stop Repeat Play To stop repeat play press m STOP button on the main unit or the remote control unit Or press the REPEAT button on the main unit or on the remote control until REPEAT disappears Caution If amp OPEN CLOSE button is pressed during repeat playback and the disc tray is opened repeat playback is canceled e Repeat playback cannot be set while the tray is open during playback PLAYING TRACKS IN A SPECIFIC SEQUENCE PROGRAM PLAY You can choose tracks or discs to play and program them in the order you want to listen Up to 32 tracks can be registered for program play RANDOM AMS REPEAT Cy Cy DISCI DISC2 DISCI DISCA DISCS marantz REMOTE CONTROLLER RC4001CC
39. trol CDs MP3 music data cannot be played There are some restrictions on the MP3 music data which can be played on this unit For details please refer to PLAYING MP3 FILES on page 2 The unit makes a clicking sound when the tray closes This is the adhesion click of the clamper for securing the disc This does not cause any problem in using the unit While the disc is spinning a spinning sound is heard or a slight vibration occurs Depending on the disc a spinning sound may occur or the unit may vibrate slightly due to disc eccentricity or such This is not a problem with this unit 19 ENGLISH SPECIFICATIONS Frequency characteristics Dynamic range 1 kHz THD 1kHz Separation wow amp flutter Output level 20Hz 20kHz 0 5 dB 100 dB or more 0 0020 110 dB or more Precision of quartz m 6 Audio Characteristics E Dimensions Analog output a Channels 2channels Cs Frequency range 20Hz 20kHz sai Unbalanced 2 0V RMS STEREO Digital output Output level cinch JACK 0 5Vp p 759 Output level optical 19dBm Optical Readout System Laser AlGaAs semiconductor Wave length 780nm Signal format Sampling frequency 44 1kHz 17 5 16 440 Power Supply POWEFSUPplV i sia rale iaia aaa Power consumption Cabinet etc Dimensions Widt
40. trols by Marantz set this switch to the EXT side Caution If the unit is used as standalone and the switch is set to EXT position remote control unit cannot be used RS 232C External Control Port A control port for professionals custom installers REMOTE CONTROL IN OUT input and output connectors When the remote control connectors on the unit and on a Marantz AV component are connected using the accessory remote connecting cables the components can be operated as a system by remote control e When connecting to a component which is equipped with remote control connectors the units REMOTE CONTROL IN connector must always be connected to the REMOTE CONTROL OUT connector on the other component to be connected e When connecting a component which is not equipped with an infrared remote sensor this component must always be connected to the unit s REMOTE CONTROL OUT connector 000000000 Z 000000000 2 gle ACIN marantz MODEL NO CC4001 ANALOG OUTPUT connectors These are the output jacks of the analog audio signals The supplied analog connection cord can be connected to the CD AUX or other connectors on an amplifier Be sure to connect the L and R channels correctly to the corresponding jacks Caution Never connect to the PHONO connector on the amplifier DIGITAL AUDIO OUT COAXIAL This jack is to be connected with a recording device amplifier D A converter etc that has c
41. xpected order e Make sure to give MP3 files the extension MP3 mp3 Files with extensions other than MP3 mp3 or without extensions cannot be played On Macintosh computers MP3 files can be played by adding the extension MP3 mp3 after the file name consisting of a maximum of 8 Roman capital letters and or numerals when recording them on CD R RW discs Files other than those with the extension MP3 mp3 are not counted It may not be possible to play some CD R RW discs due to dirt scratches or the disc s properties e Do not apply seals or tape to the label or signal side of CDs or CD R RW discs The glue could get on the disc surface making the disc get stuck inside the set e This unit is multi session compatible Only first music CDs can be played if the first session is a music CD and all the MP3 files can be played if the first session consists of MP3 files e This unit is mixed audio compatible If the first session consists of MP3 files and mixed up with music and MP3 files only the MP3 files can be played This unit is not compatible with packet write programs This unit is not compatible with play lists e This unit is not compatible with ID3 Tag e This unit cannot display the total time for discs recorded in MP3 format BEFORE USING NOTES FOR REMOVING SHIPPING SCREWS At the bottom of the player there are two red shipping screws for use when the player is transporte
Download Pdf Manuals
Related Search