Magnavox 27MDTR10S CRT Television User Manual
Contents
1. COU hh WwW NY ACCESS CODE Using the NUMBERED buttons enter 0 7 1 XXX appears i Block Channel on the Access Code screen as you Saupe press the numbered buttons S Bekal Movie Rating INCORRECT CODE will appear on the screen and you will need to enter 0 7 I again 7 The screen will ask you to enter a New Code Enter a new 4 digit code using the NUM BERED buttons The screen will then ask you to CONFIRM the code you just entered Enter your new code again XXXX will appear when you enter your new code and then display the AutoLock menu options Proceed to the next panel to learn more MAGNAVOX 22 HowTo BLock CHANNELS fter your personal access code has been set see previous page you are now ready to select the channels or the A V Inputs you want to block out or censor Once you ve entered your access code and the AutoLock features are displayed on the screen DOWN buttons until the words BLOCK CHANNELS are highlighted 1 Press the CURSOR UP Aor button to turn blocking ON or OFF for that channel When ON is selected the channel will be blocked 2 Press the CURSOR RIGHT gt Press the CH or CH button 3 to select other channels you wish to block Repeat step 2 to block the new channel When2. Audio System with Audio Inputs lonitorout AV1in AV2 in Video Cable to the Monitor out VIDEO plug Connect the other 3 ao end to the VIDEO IN plug on the Olu second VCR Ox svoro Connect one end of the red COMPONENT WED i and white Audio cable from the Audio Cables Monitor out AUDIO L and R Video Cable plugs on the TV to the AUDIO IN Yellow plugs on the VCR Turn the Second VCR ON insert a VHS tape and it s ready to record what s being viewed on the TV screen Red amp White HELPFUL HINT Audio and video cables are not sup plied with the TV but are available from Magnavox or electronics retailers Second VCR First VCR accessory device Hookup from Panel 4 3 USING THE SIDE AUDIO VIDEO INPUTS Awe and Video Side Inputs are avail able for a quick connection of a VCR to playback video from a camera or attach a gaming device Use the AV button on the remote control to tune these inputs Connect the video yellow 1 cable from the Video output on the Camera or accessory device to the Video yellow Input locat ed on the SIDE of the TV For S Video Devices Connect one end of the S VIDEO CABLE to the S VIDEO jack on the SIDE of the TV and the other end to the S VIDEO out jack on the Camera For Stereo Devices Connect 2 the audio cable red and white from the Audio Left and Right Outputs on the Camera to the Audio L
3. II Timer Menu Controls 18 19 Limited Warranty 32 Troubleshooting 30 Picture Menu Controls I5 Tuner Mode 00 12 Remote Control Button Descriptions 9 10 Sleeptimer 0 08 27 EE Basic ANTENNA CONNECTIONS combination antenna receives normal Antenna Connection broadcast channels VHF 2 13 and UHF 4 69 Your connection is easy because there is only one 75Q ohm antenna plug on the back of your TV and Combination that s where the antenna goes VHF UHF Antenna If your antenna has a round Outdoor or Indoor cable 75 ohm on the end then 300 to 75Q Back of TV you re ready to connect it to the N f He Adapter TV If your antenna has a flat twin lead wire 300 ohm you first need to attach the antenna wires to the screws on a 300 to Twin Lead 75 ohm adapter bd 2 Push the round end of the L__4 adapter or antenna onto the 75Q ohm plug on the back of the TV ga If the round end of the antenna wire is threaded screw it down finger tight BAas c CABLE TV CONNECTIONS e Cable TV input into your home Direct Cable Connection may be a single 75 ohm cable If so this connection is very simple Follow the Cable signal steps below to connect your cable signal coming from to your new television Cable Company Connect the open end of the 1 round Cable Company sup plied cable to the 75Q inp
4. USER MANUAL MAGNAVOX SMART VERY SMART Color Television 30MW5405 17 Thank you for choosing Magnavox Need help fast Read your Quick Use Guide and or User Manual first for quick tips that make your using your Magnavox product more enjoyable If you have read your instructions and still need assistance you may access or our online help at www magnavox com or call 1 800 705 2000 while with your product 3141 095 20371 Return your Warranty Registration card today to ensure you receive all the benefits you re entitled to Once your MAGNAVOX purchase is registered you re eligible to receive all the privileges of owning a MAGNAVOX product So complete and return the Warranty Registration Card enclosed with your pur chase at once And take advantage of these important benefits Warranty Owner Model Verification Confirmation Registration Registering your product Your completed Warranty Returning your Warranty within 10 days confirms your Registration Card serves as Registration Card right away right to maximum protection verification of ownership in guarantees you ll receive all under the terms and condi the event of product theft or the information and special tions of your MAGNAVOX loss offers which you qualify for warranty as the owner of your model Know these Congratulations on your Safety smbois purchase and welcome to the family Aun A Dear MA
5. 6 SAP Press the or lt 4 buttons v Incr Surround Spatial to toggle this control to On or Off SAP is short for Secondary Audio or Mono Programming and is sent as a third audio channel a SAP signal can be v Incr Surround Inc Surround heard apart from the current TV or Stereo program sound Note If SAP is not present on a selected show No SAP will appear on vSAP On the screen or Off Sound Press the gt or lt buttons to select between Stereo or Mono v Sound Mono settings Note If Stereo is not pres ent on a selected show and the TV is or Stereo placed in the Stereo mode the sound coming from the TV will remain in the Mono mode M any times while watching movies from a DVD player the image is shown in letter box format This is the format that is shown in movie theaters When shown on a TV screen the image will have areas of black on top and bottom of the screen After the desired format has been selected you can shift or nudge the picture by pressing the cursor to move the picture up or down or LEFT lt 4 buttons to select one of the toggle screen format options 1 Press the CURSOR RIGHT gt While in the format options you 2 can press the CURSOR UP A or DOWN Y buttons to nudge the picture up or down NOTE Nudge works when S appear on the TV screen Widescreen 18 How TO USE THE TIMER MENU CONTROLS yon television comes with an
6. Picture Sharpness Tint Color Temp 1 e 5 v Brightness 4 H 65 gt v Color 4 t 50 gt v Picture 450 gt v Sharpness q mmempa 7D v Tint v Color Temp Normal Warm or Cool v DNR On Off v Contrast On Off 16 How To UsE THE SOUND ADJUSTMENT CONTROLS o adjust your TV sound select and use the Sound Menu Controls listed below Treble Boost Press the P or lt buttons to turn the control On or Main Off When On the control will H Picture Treble enhance the high frequency sounds Sound gt Bass Bass Boost Press the P or 4 Features Balance buttons to turn the control On or Install AVL Off When On the control will Incr Surround enhance the low frequency sounds More tons to adjust the level of sound com ing from the left and right speakers AVL Auto Volume Leveler Press the P or lt buttons to turn the control On or Off When On AVL will level out the sound being heard v Bass 4 50 gt when sudden changes in volume occur during commercial breaks or 3 Balance Press the gt or lt 4 but COO o v Oa v Treble lt 50 gt channel changes v Balance 4 L tR gt Incr Surround Press the gt or lt 4 buttons to select between Incr VAVL On Surround or Stereo settings If Stereo or select Spatial or Mono If Mono or Off
7. Nof 4 5 1011 15 Pa PANEL PANEL PANEL PANEL PANEL PANEL 1 6 7 121 13 16 Side2 X340 PANEL PANEL PANEL PANEL PANEL ide 7 1 18 23 24 29 a a umeo PANEL PANEL PANEL PANEL PANEL em 19 1 20 25 26 30 A SP ue PANEL PANEL PANEL PANEL PANEL kwa 21 22 274 28 31 PANEL NDEX Subject Panel No Subject Panel No Alternate Channel 29 Remote Batteries Installation 3 Audio Video Connections AutoLock Controls Rear Audio Video Input Jacks 4 Access Code 0055 21 Headphone Jack 0 8 Block All Channels 23 Automatically Program TV 13 Block Channels 22 Basic Antenna Connection l Clear All Blocked Channels 23 Basic Remote Operation 3 Movie Ratings 24 Basic Television Operation 3 Other Blocking Options 26 Cable Cable Box Basic Connection 1 2 TV Ratings 0 000005 25 Care and Cleaning 31 Understanding AutoLock 20 Channel Edit 45 14 SmartPicture Control 28 Closed Caption Control 27 SmartSound Control 28 Format Control I7 Sound Menu Controls 18 Language Control
8. AV etc you must use the CURSOR Right gt or CURSOR LEFT lt 4 buttons 15 How TO USE THE PICTURE ADJUSTMENT CONTROLS T o adjust your TV picture controls select a channel and use the Picture Menu Controls listed below Brightness Press the CURSOR 1 RIGHT gt or LEFT lt buttons until the darkest parts of the picture are as bright as you prefer Color Press the CURSOR RIGHT gt or LEFT lt buttons to add or eliminate color Picture Press the CURSOR RIGHT or LEFT lt buttons until lightest parts of the picture show good detail Sharpness Press the CURSOR RIGHT gt or LEFT lt buttons to improve detail in the picture Tint Press the CURSOR RIGHT gt or LEFT lt buttons to obtain natural skin tones Color Temp Press the CURSOR RIGHT gt or LEFT lt buttons to select NORMAL COOL or WARM picture preferences NOR MAL will keep the whites white COOL will make the whites bluish and WARM will make the whites red dish 7 DNR Press the CURSOR O UA W RIGHT gt or LEFT lt buttons to turn DNR ON or OFF Dynamic Noise Reduction helps to eliminate noise from the picture Contrast Press the CURSOR 8 RIGHT gt or LEFT lt buttons to toggle the control On or OFF The Contrast control helps to sharp en the picture quality The black por tions of the picture become richer in darkness and the whites become brighter Picture Y Brightness Color
9. NO content advisory data can be blocked if set to ON and the BLOCK ING feature is set to OFF Press the CURSOR UP A or DOWN Y buttons to highlight the desired feature When highlighted each feature can 7019 be turned ON or OFF using the CURSOR RIGHT gt or LEFT lt 4 buttons on the remote How TO USE THE CLOSED CAPTION CONTROLS losed Captioning CC allows you to read the voice content of television pro grams on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in progress Press the CC button on the remote to display the current Closed CC Off Caption setting CCI Press the CC button repeatedly Cc2 to choose from the four Closed CC Mute Caption options CC Off CCI CC2 or CC Mute CC Mute will activate Closed Captioning when the MUTE button is pressed 3 When finished press the STA TUS EXIT button to remove the menu from the TV s screen SETTING THE SLEEPTIMER CONTROL Y TV can be set to automatically turn itself off at a given amount of time remote control and the SLEEP OFF timer display will appear on the 1 Press the SLEEP button on the Sleep off screen Press the SLEEP button repeat Seep 15 R gt Sleep 30 edly to pick the amount of ti
10. onscreen clock The TV can also be set to turn on or off at a specific time and tune to a specific channel when it powers itself on Press the MENU button on the remote control to display the onscreen menu Press the CURSOR DOWN V button until Features is highlight ed Press the CURSOR RIGHT gt button to display the Features menu Press the CURSOR RIGHT gt Press the CURSOR UP 2 or DOWN buttons repeatedly to These controls are Time Start Time Stop Time Channel Activate and Display Press the CURSOR RIGHT gt button to display the menu for the selected item ox UA W N Continue to Step 6 on the next page Brightness Color Picture Sharpness Tint More button to display the Timer menu highlight one of the Timer controls Timer vTime Start Time Stop Time Channel Activate Display MAGNAVOX HELPFUL HINTS then the hour number for single digit entries Remember be sure to press 0 and 19 How TO USE THE TIMER MENU CONTROLS CONT D 6 Make adjustments to the selected items by following the steps below Time Enter the current time using the Numbered buttons Use the CURSOR RIGHT gt or CURSOR LEFT lt buttons to toggle the AM and PM setting Start Time Use the numbered but tons to enter
11. finished press the STATUS EXIT button to remove the menu from the screen NOTE If you ever forget your code the 0 7 code is the factory default and can be used to enter and create a new access code AutoLock a v Block Channel Off Setup Code Clear All Block All Movie Rating TV Rating v Block Channel On Enter your Access Code to view a tuned channel that is blocked with Block Channel Channel 12 Blocked By SmartLock Channel Blocking MAGNAVOX 23 BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME fter blocking specific channels there may come a time when you want to block or clear all the channels at the same time Once you ve entered your access code and the AutoLock features are displayed on the screen DOWN buttons to select either CLEAR ALL or BLOCK ALL 1 Press the CURSOR UP Aor If CLEAR ALL is selected 2 press the CURSOR RIGHT gt button to clear all blocked chan nels All channels will be viewable If BLOCK ALL is selected press the CURSOR RIGHT gt button to turn the control ON or OFF When ON is selected ALL available channels will be blocked from viewing TUS EXIT button to remove the menu from the screen 3 When finished press the STA NOTE If you ever forget your code the 0 7 I code is the factory default and can be used to enter and create a new access code Aut
12. gt Sinton a Auto Programa Editar Canal 12 How To USE THE TUNER MODE CONTROL T TUNER MODE control allows you to change the TV s signal input to either ANTENNA CABLE or AUTO mode It s important for the TV to know what type of signal that is connected From a Cable TV signal or a normal Antenna sig nal In the AUTO mode when the AUTO PROGRAM feature is activated the TV will automatically choose the correct mode 1 2 CO UTI i W Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN Y buttons to scroll through the on screen menu until the word INSTALL is highlight ed Press the CURSOR RIGHT gt button to display the INSTALL menu features Press CURSOR UP A or DOWN Y buttons to scroll the Install features until the words TUNER MODE is high lighted Press the CURSOR RIGHT P button to select either ANTENNA CABLE or AUTO mode When finished press the STATUS EXIT button to remove the on screen menu from the TV s screen Main v Picture Brightness Sound Color Features Picture Install Sharpness Tint MAGNAVOX Main Picture Sound Features v Install Language Tuner Mode Auto Program Channel Edit Install Language v Tuner Mode Antenna _ Aut
13. lis tener to select between four different factory set sound options Press the SMART SOUND but 1 ton on the remote control The cur rent Smart Sound setting will appear in the middle of the screen ton repeatedly to toggle between the four settings PERSONAL VOICE MUSIC or THEATRE 2 Press the SMART SOUND but NOTE The way you choose to set the Sound Menu Controls will become your PERSONAL setting Personal Theatre Music I MAGNAVOX Voice THEATRE Preset sound options for watching movies MUSIC Preset sound options for musical programming where there is little or no dialogue VOICE Preset sound options for programming where heavy dialogue is present 29 ALTERNATE CHANNEL four remote control has an Alternate Channel button that allows you to toggle between the current and previous button For instance if you are watching two games on TV you can enter the channel numbers once and flip between the two channels with the touch of only one button CX After entering the two channels numbers so that one is the last viewed channel and the other is the current channel follow the step below Press the A CH button on the remote control The channels will toggle between the current channel wncnavox and the last viewed channel Kom 30 TROUBLESHOOTING No Power eCheck the TV power co
14. sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available chan nels 31 CARE AND CLEANING WARNING Concerning Stationary Images on the TV Screen Do not leave stationary or letterbox images on screen for extended peri ods of time This can cause uneven picture tube aging Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Be careful not to leave nonmoving images on screen for extended periods of time or to display the same images on screen too frequently because subtle ghost images can be left on the picture tubes Sources of stationary images may be DVD disks laser disks video games CD i disks videotapes digital television boxes broad cast channels cable channels satellite channels and others Here are some examples of stationary images this is not an all inclusive list you may encounter others in your viewing e DVD menus listings of DVD disk content e Letterbox black bars shown at the top and bottom of the TV screen when a wide screen 16 9 movie is viewed on a TV with standard 4 3 aspect ratio e Video game images and score boards e Television station logos present a problem if they are bright and station ary moving or low contrast graphics are less likely to cause uneven aging of the picture tube e Stock market tickers presented at the bottom of the TV sc
15. the time you want the TV to turn itself On Use the CUR SOR RIGHT gt or CURSOR LEFT lt buttons to toggle the AM and PM setting Stop Time Use the numbered but tons to enter the time you want the TV to turn itself Off Use the CUR SOR RIGHT gt or CURSOR LEFT lt buttons to toggle the AM and PM setting Channel Use the NUMBERED but tons or the CH or CH buttons to enter the desired start up channel Activate Set the timer to turn itself On or Off Once or Daily Press the CURSOR RIGHT gt or CURSOR LEFT lt buttons to select Once Daily or Off Display Press the CURSOR RIGHT gt or CURSOR LEFT lt buttons to toggle between On or Off If On is selected the time will be displayed all the time when the TV is on When Off is selected the time will only appear when the STA TUS EXIT button is pressed Press the STATUS EXIT button to remove the onscreen menu from the TV screen Timer v Time Start Time Stop Time Channel o Activate Display Timer o Time v Start Time Stop Time Channel Activate Display Timer o Time Start Time Stop Time Channel o Activate Display Timer oTime Start Time Stop Time v Channel o Activate o Display MAGNAVOX Timer Time o Start Time o Stop Time Channel v Activa
16. GNAVOX product owner REMOVE COVER OR MG NO USER SERVICEABLE PTS Thank you for your confidence in MAG NAVOX You ve selected one of the best This bolt of lightning indicates unin built best backed products available today sulated material within your unit may We ll do everything in our power to keep ff cause an electrical shock For the safety of you happy with your purchase for many everyone in your household please do not years to come cea om fy remove product covering As a member of the MAGNAVOX family A The exclamation point calls atten you re entitled to protection by one of the tion to features for which you should most comprehensive warranties and out ff read the enclosed literature closely to pre standing service networks in the industry JJ vent operating and maintenance problems What s more your purchase guarantees you ll receive all the information and special WARNING To reduce the risk of fire or offers for which you qualify plus easy electric shock this apparatus should not be access to accessories from our convenient ff exposed to rain or moisture and objects home shopping network filled with liquids such as vases should not Most importantly you can count on our be placed on this apparatus uncompromising commitment to your total ff CAUTION To prevent electric shock satisfaction match wide blade of plug to wide slot fully All of this is our way of saying welcome insert and
17. NTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MER CHANTABILITY OR FITNESS FOR A PAR TICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURA TION OF THIS WARRANTY Some states do not allow the exclusions or limitation of incidental or consequential dam ages or allow limitations on how long an implied warranty lasts so the above limita tions or exclusions may not apply to you In addition if you enter into a service contract agreement with the MAGNAVOX partner ship within ninety 90 days of the date of sale the limitation on how long an implied warranty lasts does not apply This warranty gives you specific legal rights You may have other rights which vary from state province to state province Magnavox P O Box 520890 Miami FL 33152 402 536 4171
18. ae org Damage Requiring Service The appliance should be serv iced by qualified service personnel when The power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appli ance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the endosure damaged m po p gt 17 18 19 20 21 22 Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design e Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn the product e Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsus pectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mount ed to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up Static charges Section 810 of the Natio
19. and R white and red jack on the SIDE of the television For Mono Devices Connect one end of the audio cable from the Audio Out jack on the device to the Audio L white jack on the SIDE of the television Turn the TV and the accessory device ON Press the CH or CH buttons to set the TV to its SIDE chan nel Go to your lowest channel for example channel then change channels down to find the correct source channel Press the PLAY 3 button on 5 the accessory device to view play back or to access the accessory device camera gaming unit etc A Gd Side A V Input Connection Jack Panel located on When head the Side phones are n 1 ofTV used the sound coming from the TV bu speakers will VIDEO be muted Video Cable yellow Optional Headphones v RIGHT LEFT S VIDEO Jack Panel of Accessory Device MAGNAVOX 9 DESCRIPTION OF REMOTE CONTROL BUTTONS NUMBER Buttons Press the Number buttons to select TV channels or to enter values in the menu For single digit channels press the Number button for the channel you want The TV will pause briefly before going to the chosen channel A CH Button Alternate Channel Press to switch between the last channel and the present channel Details are on panel 27 STATUS EXIT Button Press to see the current chan
20. avail able channels that you wish to add Skipped OFF or delete Skipped from the TV s memory You can also use the NUMBERED buttons to go directly to a specific num bered channel that you wish to add or skip Or you can also use the CH or CH to quickly scan the channels that have not been skipped Using the CURSOR DOWN V button scroll the menu to highlight the word SKIPPED Now use the CURSOR RIGHT gt button to toggle between ON or OFF If ON is selected the channel is skipped when scrolling channels with the CH or buttons If OFF is selected the channel is not skipped when scrolling channels with the CH or buttons When finished press the STATUS EXIT button to remove the menu from the TV s screen 9 Language Tuner Mode Auto Program Channel Edit Install o Language Tuner Mode Auto Program v Channel Edit_ gt v Channel Edit Channel Skipped MAGNAVOX Channel Edit Channel v Skipped Channel Edit Channel v Skipped HELPFUL HINT An X appearing in front of any channel will indicate that channel has skip on When the CH or CH buttons are used those channels will be skipped In order to get to the external input chan nels such as CVI SVHS
21. cover e Labor charges for installation or setup of the product adjustment of customer con trols on the product and installation or repair of antenna systems outside of the roduct e Product repair and or part replacement because of improper installation connec tions to improper voltage supply abuse neglect misuse accident unauthorized repair or other cause not within the con trol of Magnavox e A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was pa at manufactured approved and or authorized or repair of products damaged by these modifications Damage occurring to product during ship ping when improperly packaged or cost of associated packaging Product lost in shipment and no signature verification of receipt can be provided A product used for commercial or institu tional purposes including but not limited to rental purposes e Products sold AS IS or RENEWED O OBTAIN WARRANTY SERVICE IN THE U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact Magnavox Customer Care Center at 1 800 705 2000 TO OBTAIN WARRANTY SERVICE IN CANADA 1 800 661 6162 French Speaking ean rae English or Spanish eakin REPAIR OR REPLACEME T AS PROVIDED UNDER THIS WARRANTY IS THE EXCLU SIVE REMEDY FOR THE CONSUMER MAG NAVOX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRA
22. ind unsuitable for younger chil dren Could contain Moderate violence V some sexual situations S infrequent coarse language L or some suggestive dialogue D TV 14 This program contains some material that many parents would find unsuitable for children under 14 years of age This type of programming contains one or more of the fol lowing intense violence V intense sexual situ ations S strong coarse language L or intensely suggestive dialogue D TV MA This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 7 This type of programming contains one or more of the fol lowing graphic violence V explicit sexual situ ations S or crude indecent language L 21 SETTING UP A AutoLock Access CODE ver the next few panels you ll learn how to block channels and get a better Features understanding of the rating terms for certain o Timer v AutoLock programming First let s start by learning how to set a per sonal access code Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN buttons until the word FEATURES is highlighted Press the CURSOR RIGHT gt button to display the FEATURES menu options Press the CURSOR UP A or i DOWN buttons until the Autohoek words AutoLock are highlighted Press the CURSOR RIGHT gt button The screen will read
23. logue Press the CURSOR RIGHT gt button on the remote to turn the TV Y or TV G rating ON or OFF Or press the CURSOR RIGHT gt button to enter the sub menus for the TV Y7 TV PG TV 14 or TV MA ratings If the TV Y7 TV PG TV 14 or TV MA 5 sub menu is accessed press the CURSOR UP A or DOWN V buttons to select one of the options Block Alll V S L D or FV Press the CURSOR RIGHT gt button on the remote to turn the option ON or OFF Mee 26 OTHER AuTtOLock BLOCKING OPTIONS An offers the viewer other block ing features as well With these Blocking Options the censoring can be turned ON or OFF AutoLock Once AutoLock features are displayed on Setup Code the screen Clear All Block All Press the CURSOR UP A or Movie Rating DOWN Y buttons until the TV Rating words BLOCKING OPTIONS v Block Options are highlighted EEA Press the CURSOR RIGHT gt button to display the Blocking Options BLOCKING UNRAT ED or NO RATING menu v Blocking On BLOCKING Might be called the mas Unrated O ter switch for AutoLock WVhen ON v Unrate n ALL blocking censoring will take place When OFF ALL blocking is disabled v No Rating On UNRATED ALL unrated programs based on the Movie Ratings or Parental TV Guidelines can be blocked if this fea ture is set to ON and the BLOCKING feature is set to OFF NO RATING ALL programming with
24. lways briefly appear when the TV is first turned ON and with channel changes You can also press the STATUS EXIT button on the remote to see what channel the TV is ON VOLUME CHANNEL Remote Sensor Sensor for activating remote control commands when the remote is used to control the Power Light Indicator Light will show while TV is powered on 4 USING THE AVI IN oR AV2 IN INPUT JACKS e TV s audio video input jacks are for direct picture and sound connections between the TV and a VCR or similar device that has audio video output jacks Both the AV1 and AV2 Input Jack connec tions are shown on this page but either one can be connected alone Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks located on the back of the TV Connect the VIDEO yellow 1 cable to the VIDEO AV1 IN or AV2 IN jack on the back of the TV Connect the AUDIO red and white cables to the AUDIO left and right AV1 IN or AV2 in jacks on the rear of the TV Connect the VIDEO yellow cable to the VIDEO OUT jack on the back of the VCR either one or two or accessory device being used Connect the AUDIO red and white cables to the AUDIO left and right OUT jacks on the rear of the VCR either one or two or accessory device being used Turn the VCR either one or two or accessory device and the TV ON Press the CH or CH buttons to set the TV t
25. me 15 30 45 60 90 120 180 or 240 minutes before the TV will turn p If off Sleep 90 Itse j Sleep 120 NOTE An on screen count down will aa AEA appear during the last minute before the l g Seep 240 TV shuts itself off If any button is l pressed during the last minute of the Ne ee countdown the Sleeptimer setting will came be cancelled oe 28 USING THE SMARTPICTURE CONTROL Wiener you re watching a movie or a sporting event your TV has automatic video control settings matched for your cur rent program source or content ton on the remote control The cur rent Smart Picture setting will be dis played on the screen 1 Press the SMART PICTURE but Press the SMART PICTURE button repeatedly to select either PERSONAL MOVIES SPORTS WEAK SIGNAL or MULTIMEDIA picture settings NOTE The way you choose to set the Picture Menu Controls will become your PERSONAL setting Personal Movies Sports Weak Signal MAGNAVOX Multimedia MOVIES Preset picture options for watching Video Tapes or DVDs SPORTS Preset picture options for watching sporting events WEAK SIGNAL Preset pic ture options for watching pro grams where the reception is not at its best MULTIMEDIA Preset picture options for use with video gaming USING THE SMARTSOUND CONTROL he Smart Sound feature allows the
26. mp One I Year Display MAGNAVOX warrants this product against defect in material or workmanship subject to any conditions set forth as follows PROOF OF PURCHASE You must have proof of the date of purchase to receive warranted repair on the product A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retailer included is considered such proof COVERAGE If this product is determined to be defective LABOR For a period of ninety 30 days from the date of purchase Magnavox will repair or replace the product at its option at no charge or pay the labor charges to any Magnavox authorized service center After the eriod of ninety 0 days Magnavox will no onger be responsible for charges incurred PARTS For a period of one year Magnavox will supply at no charge new or rebuilt replacement parts in exchange for defective parts Magnavox authorized service centers will provide removal and installation of the parts under the specified labor warran BISPLAY For a period of one I year from the date of purchase Magnavox will supply at no charge a new or rebuilt active display device in exchange for the defective display Magnavox authorized service centers will pro vide removal and installation of the parts under the specified labor warranty PTV screens carry a thirty 30 day replacement yore EXCLUDED FROM WARRANTY COVERAGE Your warranty does not
27. nal Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an anten na discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings comply with recommended international global safety standards for tilt and stability properties of its cabinet design Battery Usage CAUTION To prevent battery leakage that may result in bodily injury property damage or damage to the unit e Install all batteries correctly with and aligned as marked on the unit e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT ec SECTION 810 20 GROUNDING CONDUCTORS Nec secon s10 21 GROUND CLAMPS lt POWER SERVICE GROUNDING ELECTRODE SYSTEM MEC ART 250 PART H PANEL LAYOUT MODEL recistraTion PANEL PANEL PANEL PANEL PANEL Side 1 INFORMATION 2 3 8 9 1 4 a SAFETY PANEL PANEL PANEL PANEL PANEL
28. nel number Press to remove a menu CC Button Press to activate Closed Captioning Details are on panel 25 SMART PICTURE SOUND SLEEP Button Press to set the TV to turn itself off with in a certain time Details are on panel 25 Note This button is dedicated to SmartSurf fea tures within certain TV models This TV does not contain the SmartSurf features so therefore the button will have no func tionality when pressed MAGNAVOX Continued on Next Panel 10 DESCRIPTION OF REMOTE CONTROL BUTTONS ConT POWER button Press to turn the TV on or off CH annel Buttons Press to scan memorized channels VOL ume Buttons Press to increase or decrease the sound Note Pressing both buttons together will show the onscreen menu MENU Button Press to see the menu Press repeatedly to return to previous menus or remove the menus Arrow lt gt A Y Buttons Press to select or adjust items in the menu MUTE Button Press to eliminate or restore the TV sound MUTE will appear on the TV when the sound is muted SMART SOUND Button Press to choose a sound setting Details are on panel 26 SMART PICTURE Button Press to choose a picture setting Details are on panel 26 MAGNAVOX il How To USE THE LANGUAGE CONTROL F our Spanish speaking TV owners an on screen LANGUAGE option is present With the LANGUAGE control you can set
29. o Program Channel Edit Install Language v Tuner Mode Auto Program Channel Edit Install Language v Tuner Mode Auto Program Channel Edit 13 How To AUTOMATICALLY PROGRAM TV our TV can automatically set itself for local area or Cable TV chan nels This makes it easy for you to select only the TV stations in your area when the CHANNEL or buttons are pressed Note Make sure the antenna or cable signal connection has been completed before AUTO PROGRAM is activated Press the MENU button 1 on the remote to show the on screen menu Press the CURSOR UP A 2 or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT gt button to display the INSTALL menu features Press CURSOR UP A or DOWN buttons to scroll the Install features until the words AUTO PRO GRAM are highlighted Press the CURSOR RIGHT gt button to start the Auto Program scanning of channels Auto Programming will store all available chan nels in the TV s memory then tune to the lowest available channel when done 6 When finished press the U hh W STATUS EXIT button to remove the menu from the TV s screen Main Y Picture Sound Features Install Main Picture Language Sound Tuner Mode Features Au
30. o its AV1or AV2 channel Go to your lowest channel for example channel 1 then change channels down to find the correct input With either of the VCRs or accesso ry devices ON and a prerecorded tape CD DVD etc inserted press the PLAY button to view the tape on the television GUT A HELPFUL HINT Audio and video cables are not supplied with the TV but are avail able from Magnavox or electronics retailers Back of TV ANT 750 17 Monitor out VIDEO LMono o N ANT CABLE S VIDEO OUT OUT Back of VCR lh A7 VCR One or accessory device Equipped with Audio and Video Output Jacks Audio In Connection Red and 5 VCR Two or A device Equipped with Video and Audio Output Jacks Video In Yellow 5 USING THE S VIDEO INPUT JACKS j p S uper Video connection on the Back of TV rear of the TV can provide you with bet ter picture detail and clarity for the play back of accessory sources such as DBS digital broadcast satellite DVD digital video discs video games and S VHS VCR video cassette recorder tapes than the normal antenna picture connections NOTE The accessory device must have an S VIDEO OUT put jack in order for you to complete the connection on this page Connect one end of the S Audio Cable 1 VIDEO CABLE to the S VIDEO Red and White jack on the back of the TV Then c
31. oLock a Block Channel Setup Code v Clear All Clear Block All Movie Rating TV Rating v Clear All Cleared AutoLock a Block Channel Setup Code Clear All v Block All Movie Rating TV Rating a MAGNAVOX O ea J 24 BLOCKING PROGRAMS BASED ON MoviE RATINGS he AutoLock feature can block program ming based on the Movie Industry ratings Once you ve entered your access code and the AutoLock features are displayed on the screen Press the CURSOR UP A or DOWN buttons to highlight the words MOVIE RATING Press the CURSOR RIGHT P 2 button to display the MOVIE RAT ING options G PG PG 13 R NCI7 or X Press the CURSOR UP A or 3 DOWN buttons to highlight any of the Movie Rating options When highlighted all these options can be turned ON which will allow blocking or OFF which will allow viewing Use the CURSOR RIGHT P but ton on the remote to turn the rating option ON or OFF When a rating level is chosen to be blocked any higher level rating will also be blocked from viewing i e If R is selected to be blocked NC 17 and X will automati cally be blocked NOTE If you ever forget your code the 0 7 code is the factory default and can be used to enter and create a new access code Au
32. onnect one end the AUDIO red and white CABLES to the AV2 in AUDIO L and R left and right jacks on the rear of the TV 2 Connect other end of the L R VIDEO S VIDEO AUDIO OUT OUT OUT a S VIDEO CABLE to the Back ofVGR S VIDEO OUT jack on the back of the VCR Then connect the other hm ends of the AUDIO red and white CABLES to the AUDIO left and right OUT jacks on the rear of the VCR VCR Equipped with Turn the VCR and the TV 3 S Video Jacks 5 ON Press the CH or CH buttons to set the TV to its SVHS2 channel Go to your lowest chan nel for example channel 1 then change channels down to find the correct source channel 5 Now your ready to place a prere dad corded video tape in the VCR and press the PLAY gt button HELPFUL HINT The S VIDEO and VIDEO AV in puts are in parallel The S VIDEO input is dominant when in use If separate video signals are connected to the S VIDEO and VIDEO AV2 in puts the signal from the VIDEO AV2 in puts will not be ca usable 6 USING THE CVI COMPONENT VIDEO INPUT JACKS Co Video inputs provide for the highest possible color and picture resolution in the playback of digital signal source material such as with DVD play ers The color difference signals Pb Pr and the luminance signal Y connected and received separately which allows for improved color bandwidth information not
33. possible when using composite video or S Video connections Connect the Component Y Pb Pr Video OUT jacks from the DVD player or similar device to the Y Pb Pr in put jacks on the TV When using the Component Video Inputs it is best not to connect a signal to the AV1 IN Video Jack Connect the red and white 2 AUDIO CABLES to the Audio left and right output jacks on the rear of the accessory device to the Audio L and R AV1 IN Input Jacks on the TV Turn the TV and the DVD or digital accessory device ON 4 Press the CH or CH but tad tons to set the TV to its CVI channel Go to your lowest channel for example channel 1 then change channels down to find the correct source channel Insert a DVD disc into the DVD player and press the PLAY p gt button on the DVD Player The CVI connection will be dominate over the AV1 in Video Input When a Component Video Device is connected as described it is best not to have a video signal connected to the AV1 in Video Input jack Back of TV ANT 7501r Monitor out AV1 in Component Video Cables Green Blue Red Red and White Accessory Device Equipped with Component Video Outputs HELPFUL HINT The description for the component video connec tors may differ depending on the DVD player or accessory digital source equipment used for exam ple Y Pb Pr Y B Y R Y Y Cr Cb Although abbrevi a
34. rd Unplug the TV wait 10 seconds then reinsert the plug into the outlet and push the POWER button again eCheck that the outlet is not on a wall switch Be sure the fuse is not blown on the AC power strip if one is being used No Picture Check antenna connections Are they properly secured to the TV s ANT 75Q lug eCheck the TUNER MODE control for the correct tuner setting Try running the Auto Program feature to find all available channels Press the CH or CH buttons on the remote to make sure the correct signal source is selected FRONT or Current Channel No Sound Check the VOLUME buttons eCheck the MUTE button on the remote control lf you re attempting to hook up auxiliary equipment check the audio jack connec tions located on the front of the TV Remote Does Not Work eCheck the batteries If necessary replace them with 2 AA Heavy Duty Zinc Chloride or Alkaline batteries Clean the remote control and the remote control sensor window on the TV eCheck the TV power cord Unplug the TV wait 10 seconds then reinsert the plug into the outlet and push the POWER but ton again Be sure the fuse is not blown on the AC power strip if one is being used eCheck to be sure the TV outlet is not on a wall switch TV Displays Wrong Channel or No Channels Above 13 Repeat channel selection Add the desired channel numbers using the CHANNEL EDIT control into the TV s memory eCheck to be
35. reen e Shopping channel logos and pric ing displays bright and shown con stantly or repeatedly in the same loca tion on the TV screen PLACEMENT OF THE TV e To avoid cabinet warping cabinet color changes and increased chance of set failure do not place the TV where tem peratures can become excessively hot for example in direct sunlight or near a heating appliance e Be sure to allow a free flow of air to and from the perforated back cover of the set CLEANING e To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning e Regularly dust the TV with a dry non scratching duster to keep the TV clean e When cleaning the TV take care not to scratch or damage the screen surface Avoid wearing jewelry or using anything abrasive Do not use household clean ers Wipe the front screen with a clean cloth dampened with water Use even easy vertical strokes when cleaning e Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap or detergent Use a clean dry cloth to dry the wiped surfaces e Occasionally vacuum the ventilation holes or slots in the back cover of the set e Never use thinners insecticide sprays or other chemicals on or near the cabi net as they might cause permanent marring of the cabinet finish 32 MAGNAVOX LIMITED WARRANTY Ninety 90 Days Labor amp One I Year Parts a
36. rently Out jack on the antzsanr cable box and the other end to the a AVI Video Input on the TV Connect one end of the Audio Left 6 and Right Cable to the left and right Audio Out L amp R jacks on the cable box Connect the other end to Jack Panel the AVI Audio L amp R Input jacks on Back of TV the TV NOTE Use the Channel or buttons on the TV remote control to tune to the AVI channel for the cable box signal Once tuned change channels at the cable box not the television S Gee k AUDIO a our F Video Cable Yellow Audio Cables amp R Red White 3 Basic TV AND REMOTE CONTROL OPERATION TELEVISION Press the POWER button to turn the TV ON Note You can also press any but ton on the top of the TV to turn the TV ON Press the VOLUME button to increase the sound level or the VOLUME button to lower the sound level Press the CHANNEL UP 3 or DOWN button to select TV channels REMOTE CONTROL Point the remote control 4 toward the remote sensor win dow on the TV when operating the TV with the remote BATTERY INSTALLATION Remove the battery com partment lid on the back of the remote Place the batteries 2 AA in the remote Be sure the and ends of the batteries line up correctly inside of case is marked 7 Reattach the battery lid HELPFUL HINT Remember the tuned channel num ber will a
37. s can be blocked from viewing using standard TV ratings set by TV broadcasters MOVIE RATINGS G General Audience All ages admitted Most parents would find this program suit able for all ages PG Parental Guidance Suggested This programming contains material that parents may find unsuitable for younger children PG 13 Parents Strongly Cautioned This programming contains material that parents may find unsuitable for children under the age of 13 MOVIE RATINGS Continued R Restricted This is programming is specifi cally designed for adults Anyone under the age of 17 should only view this programming with an accompanying parent or adult guardian NC 17 No one under the age of 17 will be admitted This type of programming should be viewed by adults only X Adults Only This type of programming contains one or more of the following very graphic violence very graphic and explicit or indecent sexual acts very coarse and intensely suggestive language TV RATINGS TV Y Designed for a very young audience including children ages 2 6 TV Y7_ It may be appropriate for children age 7 and above who have acquired the devel opment skills needed to distinguish between make believe and reality TV G Suitable for most audiences this type of programming contains little or no violence no strong language and little or no sexual dia logue or situations TV PG This program contains material that parents may f
38. te o Display v Activate Daily v Activate Once Timer Time Start Time Stop Time Channel Activate v Display OR v Display On 20 UNDERSTANDING THE AUTOLOcK CONTROLS he AutoLock feature is an integrated cir cuit that receives and processes data sent by broadcasters or other program providers that contain program content advisories When pro grammed by the viewer a TV with Autolock can respond to the content advisories and block program content that may be found objection able such as offensive language violence sexual situations etc This is a great feature to censor the type of viewing children may watch AutoLock offers various BLOCKING controls from which to choose Access Code An Access Code must be set to prevent children from unblocking questionable or censored programming set by their parents Channel Block After an access code has been programmed you can block individual channels including the A V inputs Clear All Allows you clear all channels being blocked from your viewing set with the Channel Block Control Block All Allows you to block ALL chan nels and A V inputs at one time Movie Ratings Certain blocking options exist which will block programming based on ratings patterned by the Motion Pictures Association of America TV Ratings Just like the Movie Ratings program
39. thanks for investing ina MAGNAVOX ff ATTENTION Pour viter les choc lec product triques introduire la lame la plus large de la fiche dans la borne correspondante de la PS Remember to get the most prise et pousser jusqu au fond from your MAGNAVOX prod uct you must return your For Customer Use Warranty Registration Card Enter below the Serial No which is located within 10 days So please mail on the rear of the cabinet Retain this infor it to us right now mation for future reference Model No Serial No Visit our World Wide Web Site at http www magnavox com IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment NOM PWN gt Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry doth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus induding amplifiers that produce heat Do not defeat the safe
40. the TV s on screen menu to be shown in either English French or Spanish Press the MENU button on 1 the remote to show the on screen menu Press the CURSOR UP A 2 or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT 3 p gt button to display the INSTALL menu features Press CURSOR UP A or 4 DOWN Y buttons to scroll the Install features until the word LANGUAGE is high lighted Press the CURSOR RIGHT 5 p gt button repeatedly to select ENGLISH FRANCAIS French or ESPANOL Spanish When finished press the 6 STATUS EXIT button to remove the menu from the TV s screen Main V Picture Brightness Sound Color Features Picture Install Sharpness Tint Main Picture Language Sound Tuner Mode Features Auto Program v Install Channel Edit HELPFUL HINT The Language control only makes the TV s on screen MENU items appear in English or Spanish text It does not change the other on screen text features such as Closed Caption CC TV shows SMART e7070 Install a v Language Tuner Mode Auto Program Channel Edit Installation a v Langue Francais gt MAGNAVOX Mode synt Progr auto diter progr Instalar v Idioma Espa ol
41. tions and terms may vary the letters b and r stand for the blue and red color component signal con nectors and Y indicates the luminance signal Refer to your DVD or digital accessory owner s manual for definitions and connection details Note Cables are not supplied with the TV but are available from Magnavox or electronics retailers USING THE MONITOR OUT PUT JACKS T Monitor Audio Video out jacks are Jack Panel great for recording with a VCR or used to Located enthe bark ofthe TV connect an external audio system for better sound reproduction For Audio System Connection Connect one end of the R ight 1 and L eft AUDIO Monitor Out jacks on the TV to the R and L audio input jacks on your amplifi er or sound system Set the audio system s volume to a normal listen AV OUT ing level AUDIO L eft and R ight Turn the TV and audio system 2 ON You can now adjust the sound level coming from the audio system with the VOLUME or button on the TV or remote control For Second VCR Connection Recorder NOTE Refer to panel 4 for the proper hookup of the first VCR Follow the instructions on how to tune to the AV1 channel to view a pre recorded tape Monitor OUT The following steps allow you to VIDEO amp AUDIO Jack Panel connect a second VCR to record the L eft and R ight Located on the back of the TV program while you re watching it Connect one end of the yellow ANT 7507r O
42. to Program v Install Channel Edit col MAGNAVOX Install Language Tuner Mode v Auto Program Channel Edit Auto Program Channel 12 9000900000000000000000 Auto Program Channel 13 000000000000000000000 Auto Program Channel 14 0000000000000000000000 HerrfuL HINT When CABLE is selected channels 1 125 are available When ANTENNA is selected chan nels 2 69 are available When AUTO is selected the TV will automatically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated 14 How To ADD or DELETE CHANNELS Cae Edit makes it easy for you to ADD or DELETE channels from the list of channels stored in the TV s memory Press the MENU button on the remote to show the on screen menu 3 Press the CURSOR UP A or DOWN Y buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT gt button to display the INSTALL menu features Press the CURSOR UP A or DOWN buttons to scroll the Install features until the words CHANNEL EDIT are highlighted Press the CURSOR RIGHT gt button to display the CHANNEL EDIT options With the CHANNEL EDIT options displayed and CHANNEL O highlighted you can use the cur sor buttons to scroll through all
43. toLock a Block Channel G Setup Code PG Clear All PG 13 Block All R v Movie Rating _ NC 17 TV Rating X v Movie Rating vG o PG PG 13 oR NC 17 oX vG On SURF SMART MAGNAVOX 25 BLOCKING PROGRAMS BASED ON TV RATINGS he AutoLock feature can block program ming based on the TV Industry ratings Once you ve entered your access code and the AutoLock features are displayed on the TV Rating screen D o TV Press the CURSOR UP A or o TV G DOWN Y buttons to highlight the o TV PG words TV RATING o TV 14 Press the CURSOR RIGHT gt 2 TV MA button to display the TV RATING options TV Y TV Y7 TV G TV PG TV 14 or TV MA Press the CURSOR UP A or 3 DOWN Y buttons to highlight any VIVY On of the TV Rating options When high lighted all these options can be turned x TV Y7 gt Block All FV ON which will allow blocking or OFF which will allow viewing VVG Off NOTE Some TV RATING options also have v TV PG gt BlockAll V S L D sub ratings The ratings of TV Y7 TV PG TV 14 TV MA can be customized to block V vio v TV 14 gt BlockAll V S L D lence FV fantasy violence S sexual situa tions L coarse language or D suggestive v TV MA gt BlockAll V S L dia
44. ty purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptades and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the appara tus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped This product may contain lead and mercury Disposal of these materi als may be regulated due to environmental considerations For dispos al or recyding information please contact your local authorities or the Electronic Industries Alliance www ei
45. ut on the TV Screw it down finger tight Back of TV 75Q Round Coaxial Cable Jack Panel Back of TV 2 CABLE Box CONNECTIONS f your cable signal uses a cable box or Cable Signal IN Cable Box w RF In Outputs decoder follow the easy steps below to com fom thie Cable ompany plete the connection Output Channel Switch Cable Box w RF In Outputs This connection will be mono Q ae Connect the Cable Company sup O plied cable to the signal IN put plug S X o a on the back of the Cable Box N A o Using a separate round coaxial cable 2 connect one end to the OUT put TO TV plug on the back of the Cable Box 3 Connect the other end of the round coaxial cable to the 75 input on the back of the television Screw it down finger tight Round 75Q NOTE Set the OUTPUT CHANNEL Coaxial Cable Jack Panel Back of TV SWITCH on the back of the cable box to CH 3 or 4 Tune the TV to the same chan Cable Signal Cable Box w Audio Video Outputs nel and change channels at the cable box IN from the Cable Company Cable Box w Audio Video Outputs A 24 o0000 This connection will supply Stereo sound as ee iets Connect the Cable Company sup P plied cable to the cable signal IN put plug on the back of the Cable Box Using an RCA type Video Cable con 5 nect one end of the cable to the Video or ANT your cable box may be labeled diffe
Download Pdf Manuals
Related Search