Lindy 32494 Microcassette Recorder User Manual
Contents
1. SIND Ye COMPUTER CONNECTION TECHNOLOGY Wireless Voice Recorder User Manual English LINDY No 32494 www lindy com CE FE LINDY ELECTRONICS LIMITED amp LINDY ELEKTRONIK GMBH FIRST EDITION JANUARY 2008 User Manual English Introduction Thank you for purchasing the LINDY Wireless Voice Recorder Never again will you run out of recording space with this Wireless Voice Recorder you can record directly to your computer s hard disk from a range of up to 30 metres Features Record Remotely Thanks to integrated 2 4GHz RF technology you can control all functions of the recorder remotely giving you the ultimate in flexibility Organise and Playback your Recordings Using the Section function you can easily create chapters as you record with the touch of a button Once you have finished your recording you can then playback the chapters in order or skip between them either on your PC or using the remote and its integrated Speaker Virtually unlimited Recording disk space All recordings are stored directly to the hard disk of your PC meaning that you have almost limitless recording disk space Built in high sensitivity microphone Ensuring the clearest recordings so you never miss a word Range up to 30 metres indoors From one side of the office to another even through walls Rechargeable Simply connect the Wireless Audio Recorder to a PC via the supplied USB cable The internal battery will be fully rec2. see an error message why Wireless recorder xmi You are recording voice Please save the file before exit OK You see this error message because the application is still making a recording Please stop the recording before exiting to ensure your file is saved correctly Do need to have my PC powered on to use the remote recorder application installed Safety and General Information 1 Recording conversations is not legal in some jurisdictions Check with local law enforcement authorities before recording any conversation The recorder is designed to use only the supplied Li polymer battery Warning DO NOT press or stab the battery The disposal of the battery must be in accordance with local regulations Digital encryption scrambles all communications transmitted between the recorder and USB dongle for your privacy Do not attempt to open the recorder only qualified personnel may repair this product Keep the recorder and its parts out of the reach of children CE FCC amp WEEE Information CE Certification This equipment complies with the requirements relating to electromagnetic compatibility EN 55024 and EN55022 class A for ITE EN61000 3 2 3 the essential protection requirement of Council Directive 89 336 EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility FCC Warning This equipment has been tested and found to comply with the limits for a Class B digit
3. Then press it again to create a second section if required and repeat as required When you are ready to stop recording press File Up Save to end and save the recording Playback 1 Press Play Pause to begin playback of the last file recorded 2 Press Sec Stop to stop the playback File selection Press File Up Save and File Down to scroll through the recordings you have made As soon as you stop scrolling the selected recording will start to playback so that you can check whether it is the correct recording Once you have the correct recording use Section Up Fast Forward and Section Down Rewind to move to the section of the recording you want to listen to To Fast Forward press Section Up Fast Forward and hold for at least 0 5 seconds To Fast Rewind press Section Down Rewind and hold for at least 0 5 seconds User Manual English Using the software You can also use the software which you installed earlier to control the remote recorder and perform many of the functions of the recorder from the PC or Laptop lean Key Function S O 1 Record Click to start recording Play Pause Press to start playing files Press it again to pause 1 In recording mode click to mark a section Section Stop 2 In playing mode click to stop playing File UP In playing mode click to fast rewind Fast Forward In playing mode click to fast forward In playing mode click to go to the previous file In playi
4. a connection has been made CAET S 14 Connection status LED 13 Charging status LED 4 File Up Save 5 Section Up Fast Forward 6 Play Pause 7 Section Down Fast Rewind 8 File Down 12 Microphone 3 Section Stop 2 Record 1 Power 11 Mode indicator 10 Speaker 9 o USB connector a a User Manual English Key Map continued Icons Keys Function description 1 Power Press and hold this key for 3 seconds to turn the recorder on off l In recording mode click to start a new section SEC Stop SCOND In playing mode click to stop playing T In recording mode click to end and save the file File A File Up Save In playing mode click to go to the previous file In playing mode scroll up to go to the previous section secA p eee ee In playing mode scroll up and hold for 0 5 seconds to activate the Fast Forward function ER Play Pause Press to start playing files Press again to pause In playing mode scroll down to go to the next section sec v 44 gets in playing mode scroll down and hold for 0 5 seconds to activate the Fast Rewind function Filey In playing mode click this button to go to the next file if KR USB connector Connect USB charging cable 2 Green Playing mode 3 Orange Insufficient disk space When the available disk space is less than 50MB 2 13 Charging status 1 Red LED on Low battery
5. al device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation 7 WEEE Waste of Electrical and Electronic Equipment Re
6. alarm LED 2 Red LED blinks Charging 1 Green LED on Connected NOTE If the recorder is out of range or disconnected the Connection status recorder will beep as a warning LED 2 Green LED blinks fast Standby mode When not used for 10 seconds the recorder will turn to standby mode 14 1 Red Recording mode uj C 7 J User Manual English Setup Plug the USB receiver dongle into the USB port of your PC and turn on the Voice Recorder Double click the Wireless Recorder icon on your desktop to run the software Check the Connection Status LED to ensure a connection has been made if a connection is not made please refer back to the Installation guide on page 3 Check the volume of the sound recording device before recording by going to Start gt gt Control Panel gt gt Sounds and Audio Devices Then choose the Audio tab as shown below and select Volume You can now adjust the recording volume sounds and Audio Devices Properties Volume Sounds Audio Voice Hardware Sound playback Default device WirelessRecorder awe Sound recording Default device CMedia wave Device WirelessAecorder MIDI music playback as Default device aa Microsoft GS Wavetable S Synth C Use only default devices Recording 1 2 3 Press Record to begin recording lf you want to create a chapter section press Sec Stop to create your first section
7. cycling of Electronic Products United Kingdom wae 2006 the European Union introduced regulations WEEE for the collection and recycling of all waste electrical and electronic equipment It is no longer allowable to simply throw away electrical and electronic equipment Instead these products must enter the recycling process Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways Please follow your national law when you want to dispose of any electrical or electronic products More details can be obtained from your national WEEE recycling agency Germany Deutschland Die Europ ische Union hat mit der WEEE Direktive umfassende Regelungen fur die Verschrottung und das Recycling von Elektro und Elektronikprodukten geschaffen Diese wurden von der Bundesregierung im Elektro und Elektronikgerategesetz ElektroG in deutsches Recht umgesetzt Dieses Gesetz verbietet vom 24 Marz 2006 an das Entsorgen von entsprechenden auch alten Elektro und Elektronikgeraten Uber die Hausmulltonne Diese Ger te m ssen den lokalen Sammelsystemen bzw rtlichen Sammelstellen zugef hrt werden Dort werden sie kostenlos entgegen genommen Die Kosten f r den weiteren Recyclingprozess bernimmt die Gesamtheit der Ger tehersteller France En 2006 l union Europ enne a introduit la nouvelle r glementation DEEE pour le recyclage de tout quipement lectrique et lectronique Chaque Etat membre
8. de Union Europ enne a mis en application la nouvelle r glementation DEEE de mani res l g rement diff rentes Veuillez suivre le d cret d application correspondant l limination des d chets lectriques ou lectroniques de votre pays Italy Nel 2006 l unione europea ha introdotto regolamentazioni WEEE per la raccolta e il riciclo di apparecchi elettrici ed elettronici Non piu consentito semplicemente gettare queste apparecchiature devono essere riciclate Ogni stato membro dell EU ha tramutato le direttive WEEE in leggi statali in varie misure Fare riferimento alle leggi del proprio Stato quando si dispone di un apparecchio elettrico o elettronico Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato LINDY No 32494 1 Edition January 2008 FC www lindy com
9. harged in 2 5 hours providing up to 12 hours of recording time System Requirements A PC running Windows 2000 XP or Vista One available USB port Package Contents Wireless Voice Recorder with battery USB receiver dongle USB charging cable Installation CD User Manual User Manual English Installation 1 Charge the recorder for 3 hours using the supplied USB cable before first use After the first charge you only need to charge the recorder for 2 5 hours 2 Plug the USB receiver dongle into the USB port of your PC and turn on the Voice Recorder 3 Windows will recognise the dongle and install the necessary drivers Once Windows has finished installing the device move to the next step 4 Insert the CD and follow the instructions to install the Recorder software If the disk does not autorun then please go to My Computer select your CD drive and double click on setup exe 5 Once the installation has completed double click the Wireless Recorder icon on your desktop to run the software 6 Next you will need to pair the USB receiver dongle and the recorder 6 1 Within the software click the Setup button 6 2 Next click the Link button The link indicator on the USB dongle will light up to show that it is ready to be paired IM Ls 6 3 Hold the recorder approximately 10cm away from the USB receiver dongle until the Link Indicator blinks The recorder will beep twice to Link indicator confirm that
10. ng mode click to go to the next file In playing mode click to go to the previous section Soctonsiop Fast Rewind Fast Forward ES Section Down v a e OR eevee Section Down In playing mode click to go to the next section Volume Control a Volume up Volume down Mute File End and Save In recording mode click to end and save the file Battery Level The bar goes lower as the battery charge runs low Click to change the recording format and FF Rewind speed Click to change the file path The default file path is C Pronram File Wireless Recorder Click x to leave and save changes To pair the recorder and dongle you can click the Link button Format options WF 44 1 kHz mono 16 bit l IR 44 1 kHz mono 16 bit i 48 kH 16 bit Format 44 1 kHz mono 16 bit Ki A ons FF Rewind speed 2 File Path A User Manual English Specifications WAV WAV 42 x 20 5 x 130mm WxDxH Weight battery included 82 49 Frequently Asked Questions Q A Q A Yes there is no storage on the remote recorder so you must use a PC with the software Why does the recorder switch itself off automatically The Remote Recorder will switch itself off automatically after 10 minutes of use if the PC software is not running or if the USB dongle is not present This is to stop the battery from running out unnecessarily Sometimes when exiting the software on my pc
Download Pdf Manuals
Related Search