LG Electronics 20/23LS7DC Car Satellite TV System User Manual
Contents
1. LG 20 23LS7DC 26 32LC7DC 42 50PC5DC 60PC1DC Integrated TVs PUBLIC DISPLAY MODE SETUP How to use the TLL 1100A TV Link Loader to copy and clone a Master TV setup is provided in the operation manual supplied with the TV Link Loader Note Prior to cloning the Public Display Mode Setup be sure to set up all the other TV features that should be included in the master TV setup This includes channel adding deleting video and audio menu setups and other TV features that are clonable Refer to the TV installation guide for specific details P NO MFL34797021 0707 REVO1 Printed in Korea WARNING CAUTION WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead A symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main tenance servicing instructions in the literature accompanying the appliance WARNING CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE NOTE TO CAB2. different from that to which the receiver is con nected Consult the dealer or an experienced radio TV technician for help Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics Unauthorized modification could void the user s authority to operate this product SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus This information shall be given in a separate booklet or sheet or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus This information shall be given in a language acceptable to the country where the apparatus is intended to be used The important safety instructions shall be entitled Important Safety Instructions The following safety instructions shall be included where applicable and when used shall be verbatim as follows Additional safety information may be included by adding statements after the end of the following safety instruction list At the manufacturer s option a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction Read these instructions O Do not defeat the safety pur
3. disabled Settings range from 1 7 repre senting the hours that the unit will remain On unless there has been activity from either the control panel or remote control Setting is retained in non volatile memory 07 Key Management If set to 1 key defeat prevents the end user from accessing the on screen menus with the display front panel MENU SELECT and lt or gt button do not function If set to 0 those keys do function Note The menus can always be accessed by pressing MENU button on the remote Key management when enabled determines the level of control that the guest has over the television Key management has four modes default is O 0 Television is unrestricted and responds to all commands 1 Key defeat prevents the television from responding to MENU key presses on the front panel 2 Key Lock prevents the television from responding to any front panel key press 3 System provider mode allows access to the menu system from the front panel or remote control but access is controlled as follows TV Guide if equipped no access Setup only access to main pip input select screens Video no access Audio no access Time only access to sleep timer Option only access to aspect ratio closed caption SimpLink Lock full access Setting is retained in non volatile memory 08 Factory Reset Set to O for normal S
4. D setup amp Key in a set ID number 1 99 Set ID Lock No Set ID 1 TV LINK LOADER KEY FUNCTIONS See Users Manual for Key Functions TV LINK Loader TLL 1100A Ready LCD FUNCTION DISPLAY WINDOW Shows current operating function MODE Selects Ready and Mode In functions MENU Brings up the main menu to the screen Enters or exits menus and submenus po OO lt EMER RECEIVE gt a UP DOWN LEFT RIGHT ENTER Use to navigate menus and submenus ENTER Functions like an Enter key on a regular remote control o Up Channels Up Down Channels Down o Left Controls Volume Down Right Controls Volume Up SEND See Users Manual for send key functions Send key functions change depending on operating mode RECEIVE See Users Manual for receive key functions Receive key functions change depending on operating mode NNAW NOILVTIVLSNI l 11 For Customer Support Service Please call 1 888 865 3026 www lgcommercial com Marketed and Distributed in the United States by LG Electronics U S A Inc 1000 Sylvan Avenue Englewood Cliffs NJ 07632 Copyright 2007 LG Electronics U S A Inc
5. LE TV INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electric Code U S A The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding sys tem of the building as close to the point of the cable entry as practical WARNING CAUTION To prevent fire or shock hazards do not expose this product to rain or moisture FCC NOTICE Class B digital device This equipment has been tested and found to com ply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio fre quency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or televi sion reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit
6. ader into the TV RS 232C port Connect the other end of the cable with the stereo mini plug into the RS 232C input port which is located on the right side of the Link Loader On Off Switch Just below the RS 232C input on the Link Loader is the On Off Switch Set the switch to the On position The display should read TLL 1100A Ready TV Setup Turn the TV display panel on Tune to an analog channel TLL 1100A TV Link Loader Operation Point the unit toward the lower center of the TV screen IR receiver While holding the unit steadily in this position press and hold the Mode button in until the TV Link Loader LCD display changes from Ready to Mode in Continue to hold Mode in as the LED on TV blinks while the TV goes through the access sequence and shows the Setup menu the Password Menu and finally the Installation menu Release the Mode button Use the Down arrow button to select TV Link Loader and press the Enter button Ready to Download display will appear on the TV screen Receiving Master TV Setup Data Press the Receive button to put the Link Loader into Receive mode The LCD will show Receive Press the Enter button to begin receiving The LCD will show OXX Prg the progress bar Check the TV Volume OSD to show receiving progress The Link Loader will record the TV setup data in its internal memory If an error occurs press Receive to cancel receiving Sending Master TV Setup Data Press the Send button to
7. e someone can not set the volume level high enough to disturb others The value range is O to 63 with 63 as the default which gives the user the full range of volume control if item 008 MIN VOLUME is also set at 0 Change values with AD Left Right arrow keys It may be best to set the same value on every TV NOTE The maximum volume level cannot have a value setting lower than the MIN VOLUME level described previously Installation Menu V1 0 TV Link Loader Password Change Set ID setup Public Display Settings Public Display Mode No Start Channel No Ch Type Major Minor Minimum Volume Maximum Volume Start Volume Level Power Management Setting Key Management Factory Reset Aspect Ratio NNAW NOILVTIVLSNI NNAW NOILVTIVLSNI INSTALLATION MENU 05 Start Volume This function allows the Installer to determine the initial volume level setting when the TV is turned ON This feature is useful for an in house information channel since the TV would always select that Volume level when it is turned on The range of values are O 63 255 If 255 is selected the current volume level will be retained in memory when the TV is turned Off At TV turn On Volume level is automatically set to the previous level Setting is retained in non volatile memory 06 Power Management Determines hours of no activity before automatic shutoff The POWER MANAGE function is for saving energy If set to No Power Manage is
8. e A or W button to select desired menu options 2 Use the lt or gt button to adjust the menu option settings Public Display Mode Menu Items 01 Public Display Mode If Public Display Mode is set to Yes Enabled all functions of Public Display Settings are active If Public Display Mode is set to No Disabled all functions of Public Display mode are not active 02 Start Channel This function allows you to determine the initial channel number when the TV is turned On This feature is useful for an in house information channel since the TV would always select that channel when it is turned On Setting this to 255 causes the last channel viewed when the TV was turned Off to be the tuned to channel when the TV is turned On again 03 Minimum Volume This function determines the minimum volume level allowable with the VOLUME VOL Up Down control In this way for example someone cannot set the vol ume too low to hear The value range is from O to 63 change values with AD Left Right arrow The factory default is 0 which provides the full range of vol ume control if item 009 MAX VOLUME is also set to 63 It may be best to set the same value on every TV NOTE The minimum volume level cannot have a value setting higher than the MAX VOLUME level described below 04 Maximum Volume This function determines the maximum volume level allowable with the VOL UME VOL Up Down controls In this way for exampl
9. et to 1 to load presets to all of the previous item settings and exit menu WARNING Setting this to 1 will reload the factory defaults Setting is retained in non volatile memory 09 Aspect Ratio Selects default aspect ratio at power up see settings below Set to O to disable Aspect Ratio will stay at previous state Set to 1 Set By Program Set to 2 for 4 3 Set to 3 for 16 9 Factory Default Setting is retained in non volatile memory Item Enable Disable Initial Public Display Mode Yes No No Start Channel Yes No No Ch Type TV CATV DTV CADTV TV Major No Subject to Ch Type 2 Minor No Subject to Ch Type Minimum Volume 0 100 0 Maximum Volume 0 100 100 Start Volume Yes No No Level 0 100 Power Management Yes No No Setting 1 7 1 Key Management 0 3 0 Factory Reset 0 0 Aspect Ratio 0 3 0 TV LINK LOADER The TLL 1100A TV TV Link Loader is not supplied with this TV It is available for purchase from your LG dealer as an optional item See your LG dealer The TV Link Loader allows a Master TV setup with Public Display Mode Setup to be copied and transferred into other identical TVs Once copied into another identical TV the Target TV will function exactly like the original Note Please see TLL 1100A Installation and Operating Guide for complete TV Link Loader Setup and Cloning Operating Instructions TV Link Loader Setup Connections Connect the MPI cord provided with the TLL 1100A TV Link Lo
10. ntegrator to install and set up the institution s communications system Public Display Mode controls operation and functionality of the TV Once set up these settings are clonable they can be copied and transferred to another identical TV See the TV Link Loader section for cloning details Accessing the Installation Menu with the Menu Button EZ Scan 1 With an LG installer remote press and hold down the nS TA Menu key for five seconds The TV screen will show AUDIO the Enter Password display TIME Manual Scan Channel Edit DTV Signal OPTION O tock Input Source Tay ele a E Set ID Key in 1 1 0 5 and press ENTER button This is the initial password The password can be changed as required Enter Password Accessing the Public Display Mode Menu Use the A or Y button to select the Public Display Settings option and press the gt button Installation Menu V1 0 TV Link Loader Once in the Public Display Settings menu use the A ae V lt gt button to select and adjust the menu options eat to your requirements If you want Public Display mode to be enabled select Yes for that option Ap atl Public Display Mode Menu with the Mode Button Press and hold the MODE button for more that 3 seconds The TV will automatically display the Installation Menu after about 5 7 seconds PUBLIC DISPLAY SETUP Set item to act TV with standalone D Use th
11. pose of the polarized Keep these instructions or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided Do not use this apparatus near water plug does not fit into your outlet consult an S electrician for replacement of the obsolete outlet Clean only with dry cloth 6 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus A Heed all warnings Follow all instructions 3 Do not block any ventilation openings Install in accordance with the manufacturer s instructions Nie ZINN tf Z Only use attachments accessories specified by the manufacturer Q 4 Do not install near any heat sources such as lt s gt radiators heat registers stoves or other apparatus including amplifiers that produce heat Unplug this apparatus when unused for long periods of time SAFETY INSTRUCTIONS Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over D 2 315 m with an exact replacement part by an authori
12. put the Link Loader into Send mode When IR Send or RS Send appears on the LCD press Enter The Link Loader will transfer the TV setup data in its internal memory to the Target TV If an error occurs press Send to cancel sending After the transfer is complete the OSD is removed from the screen and the TV turns off TV turn off indicates that the transfer is complete Refer to the TLL 1100A User s Manual for more detailed information NNAW NOILVTIVLSNI NNAW NOILVTIVLSNI INSTALLATION MENU PASSWORD CHANGE If security for the system is a critical issue the password can be changed Changing the Password Use the A or W button to select the Password Change Installation Menu V T0 option and then press the or ENTER button Public Display Settings Key in 1 1 0 5 or the old password TV Link Loader gt Set ID setup gt a f the password is incorrect the unit will return to the Installation menu 2 Key in a new four digit password key in the password New Eje again for confirmation Confirm m Password cannot be 8 7 4 1 That sequence of number is used to enter the calibration menu SET ID SETUP Installation Menu V1 0 1 Use the A or W button to select the Set ID Setup option and then press the or ENTER button Public Display Settings p gt TVLink Loader gt Password Change gt 2 Select Yes to enable set ID Lock or No to disable set ID Lock Set I
13. s loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates dam age or deterioration unplug it discontinue use of the appliance and have the cord replaced GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock If grounding methods are not possible have a qualified electrician install a separate circuit breaker Do not try to ground the unit by connecting it to telephone wires lightening rods or gas pipes Short circuit Breaker DISCONNECTING POWER Power is supplied to the Link Loader if the power cord is connected Unplug power cord from AC power outlet to remove power CONTENTS WARNING CAUTION 000s 2 SAFETY INSTRUCTIONS ooo ee 3 INSTALLATION MENU Entering the Installation Menu 00 ees 6 Public Display Settings 2 000000 00ers 7 MV Link boader siii ee othe eatin Rie aie eh 8 9 Password Change c0 80 ad a a n aa 10 TV Link Loader Key Functions 000000 c ccc T NNAW NOILVTIVLSNI INSTALLATION MENU ENTERING THE INSTALLATION MENU The feature set up available on this LG commercial TV which features TV link are shown on the Installation Menu This simple menu is designed to make it easy and efficient for the system i
14. zed servicer Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the appliance Never touch this apparatus or antenna during a thunder or lighting storm Do not allow a impact shock or any objects to fall into the product and do not drop onto the screen with something Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has exposed to rain or moisture does not operate normally or has been dropped Outdoor use marking WARNING To reduce the risk of fire or elec tric shock do not expose this appliance to rain or moisture Wet Location Marking Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on or over apparatus CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit that is a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits Check the specification page of this owner s manual to be certain Do not overload wall outlets Overloaded wall outlet
Download Pdf Manuals
Related Search