Home

Lexicon RT-10 CD Player User Manual

1. A 4 RT 10 Appendix Setup Menu Screens Expert Mode A2 Videol V2 Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area aa M s Exit Audiol A2 V1 Language General Background Gray Video Adjust Still Playback Auto On Screen Display On Angle Indicator On A Move Exit Setup Menu Screens Basic Mode A2 Videol V2 Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Set audio Digital output format tone adjust al Jal UNAS SETUP fad Audiol A2 V1 Language General Background Gray Video Adjust OSet video Adjust video format quality EBAY Move SETUP dis EN Audio MEN V2 Language General Audio Out 2 Channel Speaker Setting Gain Setting Fix CD Digital Direct Off ap Y Move SETUP ss Audiol A2 Video V2 Language esu OSD Language English Audio Language English Subtitle Language English Auto Language On DVD Language English Subtitle Display On Subtitle Off Selected Subtitle ap OY Move SETUP sis EN Aucio MEN V2 Language General Audio Out 2 Channel Speaker Setting OSet audio Digital output format tone adjust ap OY Move SETUP sis Audiol A2 Video V2 Language esurire OSD
2. 4 28 RT 10 Playback Controls Frame Time Note Activates playback at the selected playback time minutes seconds in the currently playing frame This search mode is not available unless playback or pause mode is activated Page Activates playback at the selected browsable picture on the loaded disc This search mode is not available unless the loaded disc includes browsable pictures To activate search mode 1 N Press the remote control SEARCH button to open one of the search bars shown above at the top of the on screen display e The Time and Frame Time search modes are not available unless playback or pause mode is activated e The Search bar indicates the selected search mode When the search bar opens press the SEARCH button again to cycle through all search modes available for the loaded disc The table on page 4 12 indicates the search modes available for each disc format The search bar automatically closes a few seconds after the last command is received When this occurs search mode is automatically deactivated When the desired search mode is selected press the remote control number buttons to enter a search value It is not required to press the 10 button 2 15 to enter values 10 and above For example e To enter Title 6 press the number 6 button e To enter Track 16 press the number 1 button then the number 6 button e To enter a playback time of 16 minutes and 16 second
3. Audiol PANTERAS Language General Audio DRC Off Dolby Digital Out MNAE E DTS Out Dolby Digital PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area LIT LS SETUP BS ls Dolby Digital Out Dolby Digital Dolby Digital PCM Controls Dolby Digital audio output format when a Dolby Digital source is present and the RT 10 is using the digital audio output connector Select Dolby Digital if the associated component is compatible with Dolby Digital sources The RT 10 will pass Dolby Digital signals directly to the associated component Select Dolby Digital PCM if the associated component is not compatible with Dolby Digital sources The RT 10 will convert Dolby Digital signals to PCM before passing them to the associated component The Dolby Digital Out parameter is associated with the Setup Navigator Digital Jack prompt 3 7 The Dolby Digital Out parameter and Digital Jack prompt settings have no effect when the RT 10 is not using the digital audio output connector RT 10 Setup Menus Audioi ENTENDES Language General Audiol EVIMVEEREREZE Language General Audio DRC Off Audio DRC Off Dolby Digital Out Dolby Digital Dolby Digital Out Dolby Digital DTS Out S DTS Out DTS PCM Linear PCM Out DTS PEM Linear PCM Out EE O MPEG Out MPEG PCM MPEG Out liDown Sample Off Digital Out On Digital Out On SACD Playback
4. 7 When the desired values have been entered press the Play or ENTER button to close the Program tab and activate program playback e Press the PROGRAM button to close the Program tab without activating program playback e Refer to the Repeat Playback section that begins on page 4 20 to activate repeat program playback To add the currently playing title chapter group or track to an existing program list T Activate playback of a disc for which a program list has been created When playback of the desired title chapter group or track is activated press the remote control PROGRAM button for about 1 second e If this is a DVD program list refer to the notes that begin below e If this is an SACD CD or SVCD program list the currently playing track will be added to the end of the program track list If no program track list has been created for the loaded disc a new program track list will be created beginning with the currently playing track Note the following The currently playing chapter will be added to the end of the program chapter list when a program chapter list has been created for the currently playing title Likewise the currently playing track will be added to the end of the program track list when a program track list has been created for the currently playing group The currently playing title will be added to the end of the program title list when a program title list has been created for
5. Do not handle the mains lead with wet hands Make a space of about 33ft 0 1m around the unit Slots and openings on the case are provided for ventilation To ensure reliable operation of the unit to protect it from overheating and to prevent fire hazard these openings must not be blocked or covered with items such as newspapers table cloths or curtains In addition do not place the unit on a thick carpet bed sofa or fabric with a thick pile CAUTION LASER SAFETY This unit employs a LASER Only a qualified person should remove the cover or attempt to service this device due to possible eye injury CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure The use of optical instruments with this product will increase eye hazard BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY THE AVAILABLE POWER SUPPLY VOLTAGE DIFFERS AMONG COUNTRIES AND REGIONS MAKE SURE THE POWER SUPPLY VOLTAGE OF THE AREA WHERE THIS UNIT WILL BE USED MEETS THE REQUIRED VOLTAGE E G 230V OR 120V WRITTEN ON THE REAR PANEL FOR CANADIAN MODEL This Class B digital apparatus complies with Canadian ICES 003 POUR LE MODELE CANADIEN Cet appareil num rique de la Classe B est conforme la norme NMB 003 due Canada DO NOT PLACE NAKED FLAME SOURCES SUCH AS LIT CANDLES ON TH
6. Euro or Peritel TV A V Connector Provides composite S video or RGB video and two channels of audio output Some versions include one SCART connector labeled TV A V CONNECTOR The Video Out parameter 3 27 controls video output format when the RT 10 is using the Euro or Peritel TV A V connector 7 Digital Audio Output Connectors Provide digital audio output All versions include one coaxial and one optical connector labeled S PDIF as well as one XLR connector labeled AES EBU The connector labeled AES EBU provides S PDIF digital audio output with AES EBU electrical characteristics Analog Audio Output Connectors Provide analog audio output All models include eight RCA connectors labeled Front L R 2 pairs Surround L R Center and Sub The Audio Out parameter 3 16 can be used to configure these connectors to provide 2 or 5 1 channel analog audio output Trigger Input Switch Enables and disables trigger control when the trigger input connector number 10 on the RT 10 is connected to the trigger output connector on an associated component When the trigger input connector on the RT 10 is connected to the trigger output connector on an associated component and the trigger input switch is set to ON the RT 10 responds when standby mode is activated or deactivated for the connected component Whenever the trigger input switch is set to ON the remote control POWER button cannot be used to activate and deactivate stan
7. lexicon RT 10 Universal Disc Player User Guide pr dl ad a j e Quer dt j n G ge zu eet H A Harman International Company IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING Unplug this product from the wall outlet before cleaning The product should be cleaned only with a polishing cloth or a soft dry cloth Never clean with furniture wax benzine insecticides or other volatile liquids since they may corrode the cabinet ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards WATER AND MOISTURE Do not use this product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like ACCESSORIES Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the
8. Appendix Lexicon Language Tab Audiol A2 Videol V2 Language esurire OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off EBAY Move Audiol A2 Video1 V2 OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off EBAY Move Audiol A2 Video1 V2 OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off EBAL Move Other Language Screens Audio Language List of Languages English francais i Deutsch H Italiano IEspanol On Selected Subtitle SETUP Mais Language eure English English English On HOFF On Selected Subtitle SETUP Mais Language esurire English English English On English With Audio Selected Subtitle SETUP Maxis Language esurire Code 0 2 Return ENTER EEC SETUP a Audiol A2 Video1 V2 OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off EBAY Move Audiol A2 Video1 V2 OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off EBAY Move Audiol A2 Video1 V2 Subtitle Language List of Languages Language esurire English English i French iGerman H Italian ESpanish I Other SETUP Maxis Language
9. Front Panel Display Provides at a glance viewing of status information about the RT 10 and the loaded disc Refer to the Front Panel Display section that begins on page 2 6 for more information Display Off Button Activates and deactivates the front panel display When the front panel display is activated pressing the Display Off button deactivates the front panel display and lights the Display Off button LED When the front panel display is deactivated pressing the Display Off button activates the front panel display The Display Off button LED e Lights to indicate that the front panel display is deactivated e Does not light when the front panel display is activated e Blinks to indicate that the Advanced Setup menu is open on the front panel display Front Panel Overview continues on page 2 4 2 3 Basic Operation Lexicon Front Panel Overview continued from page 2 3 The numbers in the RT 10 front panel illustration shown on page 2 2 correspond to the numbered items that continue below 5 Display Off Button continued The DISP MODE parameter 3 52 can be used to select the front panel display mode for SACD CD and MP3 playback When set to ON the front panel display is deactivated during SACD CD and MP3 playback When playback mode is activated pressing the Display Off button activates the front panel display for about 3 seconds When stop mode is activated the front panel display remains act
10. Off I X LL Move SETUP Maxis Video Recording TV Screen Display Device Display Device Appearance Format Parameter Aspect Ratio Setting 4 3 Letter Box 4 3 N A The picture appears between black bars at the top and bottom of the screen 16 9 4 3 Pan amp Scan 4 3 N A The picture appears cropped at the sides allowing the picture to fill the screen Although the picture on 16 9 the screen might seem larger less of the picture is actually visible 16 9 Wide 4 3 N A The picture appears squashed It is recommended to set the TV Screen parameter to 4 3 Letter Box or 16 9 4 3 Pan amp Scan 4 3 Letter Box 4 3 N A The picture appears as intended regardless of the TV 4 3 4 3 Pan amp Scan Screen parameter setting 16 9 Wide 16 9 Wide 16 9 Normal 4 3 The picture appears squashed It is recommended 16 9 to set the display device to Full 16 9 Video1 continues on page 3 26 3 25 Setup Menus Lexicon Video1 continued from page 3 25 TV Screen continued Select 16 9 Wide or 16 9 Compressed if the associated display device screen has a 16 9 aspect ratio Select Standard 4 3 Letter Box or 4 3 Pang Scan if the associated display device screen has a 4 3 aspect ratio The appearance of the picture depends on the TV Screen parameter or TV Type prompt setting the video output format the loaded disc and display device settings The TV Screen para
11. Program Memory Off Program Memory Off DC Wie Play aa Nove Play AICM Program Group Program Track gel Meigo to Current 1 4 Current Group 1 Track Group 1 Track 1 8 Ee Move Play Exit aa Move Play Exit 4 When the Program Memory parameter is selected press the 4 5 and arrows to move the cursor to the parameter settings menu that appears to the right of the parameter label Then press the and arrows to highlight the desired setting When the desired setting is highlighted press the remote control ENTER button to select this setting When the desired setting has been selected 6 e If this is a program title list proceed to step 5 e If this is a program chapter list proceed to step 6 MP3 Program Folder 001 25 Play PROGRAM 1 1 13 ENTER EA PROGRAM isis Press the and arrows to select the Title or Group field at the top of the Program tab Then press the remote control number buttons to enter the corresponding title or group number for which the program chapter or program track list is being created Program chapter or track lists cannot include chapters or tracks from different titles or groups Press the a and w arrows to select the first field of the program list Then refer to the table on page 4 22 for instructions to insert the desired values Program Mode continues on page 4 26 4 25 Playback Controls Lexicon Program Mode continued from page 4 25
12. S Video Out Frame Search Screen Saver EBAY Move SETUP MA Component Video Progressive Interlace Controls component video output format when the RT 10 is using the component video output connectors Select Progressive if the associated display device provides a progressive scan component video input connector Select Interlace if the associated display device does not provide a progressive scan component video input connector When Progressive is selected e The picture might appear stretched on the associated display device screen if a video source recorded in 4 3 format is present and the RT 10 or the display device is configured for a 16 9 aspect ratio To correct this configure the RT 10 or the display device for a 4 3 aspect ratio Refer to the TV Screen parameter description on page 3 25 and the table on pages 3 25 and 3 26 for more information e The picture will not appear on the associated display device screen if the display device does not provide a progressive scan component video input connector To correct this set the Component Video parameter to Interlace and configure the RT 10 for a different video output connection to the display device NORET Videol NINE ECC El TV Screen 16 9 Wide Component Video Progressive Video Out WE S Video Out AS Video Frame Search IRGB Screen Saver Off E I X LL Move SETUP Basis e The RT 10 converts video sources recorded on film to 60 fr
13. SETUP Closes the Setup Navigator and the Setup menu without saving the selected settings Audiol A2 Videol V2 Language Setup DNENTERTS ETE OSD Language Italiano Select the On Screen Language rA Move ENTER SIS SETUP ia Setup Navigator Start Auto Start Off Activates and deactivates the Setup Navigator Select Start to activate the Setup Navigator and proceed to the OSD Language prompt below Select Auto Start Off to deactivate the Setup Navigator Once deactivated the Setup Navigator must be opened from the Setup menu General tab 3 42 The Setup Navigator prompt is associated with the General tab Setup Navigator parameter 3 42 When the Setup Navigator is opened from the General tab the Auto Start Off option is not available OSD Language Determines the language in which RT 10 on screen display menus appear The OSD Language prompt is associated with the Language tab OSD Language parameter 3 36 English francais Deutsch Italiano Espafiol 3 4 RT 10 Setup Menus Audiol A2 Video1 V2 Language Audiol A2 Videol V2 Language Setup NEVER Setup NEVER TV Connection Amp Connection SVMs Widescreen 16 9 Analog Jacks 5 1 Channel Standard Not Connected Widescreen TV 2 channel jacks for L R 16 9 aspect ratio DA Move ESC SETUP EAS Dal Move Eod SETUP Mt TV Type Widescreen 16 9 Standard 4 3 Note Controls the appearance of the picture on the associated displa PP f P
14. SETUP Maxis Audiol A2 Video1 V2 Language Country Code Confirm Code Number A ia Return SETUP Mais A 13 Appendix Lexicon TABLE OF LANGUAGES amp LANGUAGE CODES Numeric Numeric Numeric Language Code Abb Language Code Abb Language Code Abb English Anglais 0514 en Bislama 0209 bi Hausa 0801 ha French 0618 fr Bengali 0214 bn Hindi 0809 hi German 0405 de Tibetan 0215 bo Croatian 0818 hr Italian 0920 it Breton 0218 br Hungarian 0821 hu Japanese Japonais 1001 ja Catalan 0301 ca Armenian 0825 hy Spanish 0519 es Corsican 0315 co Interlingua 0901 ia Dutch 1412 nl Czech 0319 cs Interlingue 0905 ie Russian 1821 ru Welsh 0325 cy Inupiak 0911 ik Chinese 2608 zh Danish 0401 da Indonesian 0914 in Korean 1115 ko Bhutani 0426 dz Icelandic 0919 is Greek 0512 el Esperanto 0515 eo Hebrew 0923 iw Afar 0101 aa Estonian 0520 et Yiddish 1009 ji Abkhazian 0102 ab Basque 0521 eu Javanese 1023 jw Afrikaans 0106 af Persian 0601 fa Georgian 1101 ka Amharic 0113 am Finnish 0609 fi Kazakh 1111 kk Arabic 0118 ar Fiji 0610 fj Greenlandic 1112 kl Assamese 0119 as Faroese 0615 fo Cambodian 1113 km Aymara 0125 ay Frisian 0625 fy Kannada 1114 kn Azerbaijani 0126 az Irish 0701 ga Kashmiri 1119 ks Bashkir 0201 ba Scots Gaelic 0704 gd Kurdish 1121 ku Byelorussian 0205 be Galician 0712 gl Kirghiz 1125 ky Bulgarian 0207 bg Guarani 0714 gn Latin 1201 la Bihari 0208 bh Gujarati 0721 gu Lingala 1214 In RT 10 Appendix Numeric Numeric Numeri
15. When Off is selected the RT 10 selects audio track and subtitle language based on the Audio Language and Subtitle Language parameter settings Note the following e In most cases subtitles do not appear on the on screen display when the Subtitle Display parameter 3 40 is set to Off regardless of the Subtitle Language previous page and Auto Language parameter settings e f the loaded disc does not include subtitles subtitles do not appear on the on screen display regardless of Language tab parameter settings DVD Language Refer to the table on pages A 14 and A 15 Determines the language in which DVD menus and top menus appear If the selected DVD menu language is available on the loaded DVD the RT 10 selects that language If the selected DVD menu language is not included on the loaded DVD the RT 10 selects the default disc menu language When w Subtitle Language is selected DVD menus appear in the selected subtitle language Select Other to choose a language other than English French German Italian or Spanish The DVD format recognizes 136 different languages which are listed in the table that begins on page A 14 When Other is selected the DVD Language screen shown above opens on the on screen display Language continues on page 3 40 3 39 Setup Menus Lexicon Language continued from page 3 39 Audiol A2 Videol V2 Language esurire OSD Language English Audio Language English S
16. 0 2 00000 xi 99 P Section 3 Setup Menus Retirando a embalagem e Inspecionando xi Control Bat sese Ree a ES 3 2 Setup Navigator is oe eee dhe pii ERA RE IR ER RR 3 2 Setup Men ssi RE RR Rok 9 y YR es 3 9 Audiol e Audio2 Videol Video2 e Language General Setup Menu Shortcuts llle 3 50 Advanced Setup Menu sse 3 51 RT 10 Introduction Section 4 Playback Controls Playback Icons lees 4 2 Loading Discs vem e mE REY OPER 4 2 Navigating Disc Menus meci 0 0 00 ee 4 3 Selecting Disc Settings sug css pe el tie Doe ye t 4 7 Audio Tracks e Subtitle Languages Camera Angles e Storing Disc Settings Playback Modes esses ae 0 0 0 0 cc eee A 4 11 Playback e Last Memory Playback e Stop Mode e Resume Mode e Pause Mode e Still Frame Playback e Frame by Frame Playback e Slow Playback e Random Playback e Repeat Playback e A B Repeat Playback e Program Mode e Search Mode Display Mode Section 5 Troubleshooting Maintenance Troubleshooting llle 5 2 Power Issues Remote Control Issues Video Output Issues e Audio Output Issues e Playback Issues e Setup Menu Issues e Playback Control Issues e Miscellaneous Issues RETO Maintenance 0 cee eee eee eee 5 15 Disc Maint nanc ics ius ius Rm RUE RR onm ER ie 5 16 Restoring Factory Default Settings 5 16 Appendix Specifications s c sess eh ray he hee eee ea e A 2 Declara
17. 26 Sample Rate Indicator Indicates that a 192kHz or 96kHz source is present The sample rate 192kHz or 96kHz appears in red Front Panel Display Indicators continues on page 2 8 2 7 Basic Operation Lexicon Front Panel Display Indicators continued from page 2 7 27 28 The numbers in the RT 10 front panel display illustration shown on page 2 6 correspond to the numbered items that continue below Channels Indicator Indicates all audio channels available on the M loaded disc The table below provides the channel L associated with each letter abbreviation nnm m tn un AI Dod Channel Output Connector L Front Left C Center R Front Right LFE Subwoofer Low Frequency Effects LS Surround Left S Subwoofer RS Surround Right LFE information is sent to the Sub analog audio output connector O Indicates that the RT 10 is receiving a remote control IR command even when the RT 10 is using the IR IN connector The RT 10 does not receive remote control commands unless the RT 10 is powered on with the front panel On Off button REAR PANEL OVERVIEW The RT 10 is manufactured for sale in several different countries Each version features a rear panel that includes connectors and safety instructions appropriate to that particular region Note The rear panel shown on the next page includes all pos
18. 2ch Area SACD Playback 2ch Area EBAY Move SETUP a LI X L Move SETUP Maxis DTS Out DTS DTS PCM The DTS Out parameter is associated with the Setup Navigator Controls DTS audio output format when a DTS source is present and the RT 10 is using the digital audio output connector Select DTS if the associated component is compatible with DTS sources The RT 10 will pass DTS signals directly to the associated component Select DTS PCM if the associated component is not compatible with DTS sources The RT 10 will convert DTS signals to PCM before passing them to the associated component Associated components that are NOT compatible with DTS sources will output DTS noise when all of the following conditions are met e A DTS source is present e The Digital Jack prompt is set to Dolby Digital DTS or Dolby D DTS MPEG OR the DTS Out parameter is set to DTS Digital Jack prompt 3 7 The DTS Out parameter and Digital Jack prompt settings have no effect when the RT 10 is not using the digital audio output connector Linear PCM Out Controls PCM digital audio output format when a 96kHz PCM digital audio source is present and the RT 10 is using the digital audio output connector Down Sample On Down Sample Off Select Down Sample On if the associated component is not compatible with 96kHz PCM sources The RT 10 will downsample 96kHz PCM signals to 48kHz before passing them to the associated component Select Down Sample Off if the
19. BOff EBAY Move SETUP Mais LORE YA Videoi PAM E ELE El TV Screen Wide Component Video MITRA Video Out nterlace S Video Out S2 Frame Search Off Screen Saver Off EBAY Move SETUP je AORE YA Videoi MAAR EMNE ME CT El TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out Frame Search MoN Screen Saver Off EBAY Move SETUP ime INTIS VENER Video2 Language General Background Gray Video Adjust ET Still Playback Auto On Screen Display On Angle Indicator On EBAY Move SETUP je UNORE VAYA Video2 MET ELE ez Background Gray Video Adjust Still Playback Auto On Screen Display On Angle Indicator EBAL Move SETUP Mss INUNDA Video PAARE Me EE El TV Screen 16 9 Wide Component Video Progressive Video Out S Video Out S Video Frame Search BRGB Screen Saver Off EBAY Move SETUP Mais AORE YA Videoi NAME EE El TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out S2 Frame Search Screen Saver EBAL Move Exit TUI Video2 Language General Background Gray Video Adjust Still Picture UE On Screen Display iFrame Angle Indicator EBAY Move SETUP Mais A 8 RT 10 Appendix Video Adjust Audiol A2 Vi Language General Page 1 2 Page 2 2 Prog Motion fast HH 111111 slow off HH 111111 max Background Gray Autol PENA ii White Level
20. DVD RW R SACD Audio CD CD RW R Video CD and SVCD formats It delivers exceptional sound quality with Dolby Digital DTS and PCM Linear or Packed digital audio sources In addition it supports most MPEG video and MP3 audio Sources With rear panel connectors befitting a reference quality player the RT 10 includes the standard composite and S video output connectors as well as progressive scan component video output on RCA or professional grade BNC connectors High precision 12 bit 108MHz D A converters provide a pristine video image without degradation during analog conversion Progressive scan component video output converts interlaced video signals to progressive video signals doubling the amount of video information sent to a compatible display device The result is a higher quality more stable image with fewer video artifacts Video Adjust allows for exact detailed adjustment of video settings such as Pure Cinema sharpness white black gamma hue and chroma levels as well as luminance YNR chrominance CNR mosquito MNR and black BNR noise reduction Pure Cinema automatically converts film sources recorded at 24 frames per second to 60 frames per second to create a more natural picture The RT 10 offers six banks of Video Adjust settings including three preset banks for CRT plasma and professional display devices and three memory banks for storage of user defined Video Adjust settings Digital audio sources a
21. Then press the 4 and gt arrows to highlight the desired memory bank 1 2 or 3 When the desired memory bank is highlighted press the ENTER button to select that bank Its settings will be applied to pictures on the display device screen until another Video Adjust bank is selected or factory default settings are restored e When Off is selected the selected settings are applied to the picture on the display device screen until a Video Adjust bank is selected factory default settings are restored or the RT 10 is powered off with the front panel On Off button Video2 continues on page 3 34 3 33 Setup Menus Lexicon Video2 continued from page 3 33 Video Memory Select Video Adjust Video Adjust continued Prog Motion fast to slow Controls the still picture quality when the RT 10 is using the component video output connectors This parameter is not available unless the RT 10 is using the component video output connectors Selecting Video Adjust Banks The Video Memory Select bar shown above can be used to select the desired Video Adjust bank The RT 10 offers six banks of Video Adjust settings including three preset banks for CRT plasma and professional display devices and three memory banks for storage of user defined Video Adjust settings The Professional bank is automatically selected when factory default settings are restored To select a Video Adjust bank 1 Press the remote contro
22. although the Standby LED remains lit for a few seconds after the RT 10 is powered off When the RT 10 is powered on standby mode is also deactivated even if standby mode was activated when the RT 10 was powered off The front panel On Off button cannot be used to activate standby mode Note Power is still supplied to the RT 10 when standby mode is activated Disc Drawer amp Open Close Button Loads and unloads the inserted disc When the disc drawer is closed pressing the Open Close button opens the disc drawer When the disc drawer is open pressing the Open Close button closes the disc drawer The disc drawer can also be closed with a gentle press against the front of the disc drawer When the disc drawer is open pressing the Play button closes the disc drawer and activates playback from the beginning of the loaded disc Whenever the disc drawer is closed the RT 10 attempts to load a disc even if the disc drawer is empty Single sided discs should be loaded with the label side facing upward and double sided discs should be loaded with the side intended for playback facing downward All discs must align with the circular guide inside the disc drawer Refer to the Loading Discs section that begins on page 4 2 for more infor mation CAUTION The RT 10 is a single disc player Do not attempt to insert more than one disc into the disc drawer at one time This might cause damage to the RT 10 the discs or both
23. effektkrav M rkv l att andra matningssp nningar eventuellt kr ver att en annan typs n tsladd och eller kontakt anv nds Installera inte enheten i ett oventilerat stativ eller direkt ovanf r utrustningar som avger v rme t ex effektf rst rkare Se till att omgivningens temperatur vid drift inte verskrider det angivna v rdet i produktspecifikationen Beh llaren r f rsedd med h l och ppningar f r ventilering F r att garantera tillf rlitlig funktion och f rhindra verhettning f r dessa ppningar inte blockeras eller t ckas Inga f rem l f r skuffas in genom ventilationsh len Inga v tskor f r spillas p enheten Anslut aldrig audioeffektf rst rkarutg ngar direkt till n gon av enhetens kontakter F r att undvika elst t eller brandfara f r enheten inte uts ttas f r regn eller fukt eller anv ndas p st llen d r den blir v t Anv nd inte enheten om den har fallit i golvet skadats blivit v t eller om dess prestanda f r ndrats m rkbart vilket kr ver service Enheten f r ppnas endast av beh rig servicepersonal Farliga sp nningar blir tillg ngliga n r locken tas bort f religger Denna triangel som visas p din komponent anger att viktiga bruksanvisningar och serviceanvisningar ing r i dokumentationen i fr ga Denna triangel som visas p din komponent varnar dig om en oisolerad farlig sp nning inne i enheten Denna sp nning r eventuellt s h g att fara f r elst
24. is not using the analog audio output connectors When 2 Channel is selected the RT 10 passes analog audio sources to the Front L R analog audio output connectors When 5 1 Channel is selected the RT 10 passes analog audio sources to the Front L R Surround L R Center and Sub analog audio output connectors Refer to the table on page 3 17 for more information Setup Navigator continues on page 3 6 3 5 Setup Menus Lexicon Setup Navigator continued from page 3 5 Audiol A2 Video1 V2 Language Setup NEVER Amp Connection Center Speaker Not Present DCenter speaker is connected to an amplifier DON Move EE SETUP fava Analog Jacks continued The Analog Jacks prompt is associated with the Audio2 tab Audio Out parameter 3 16 The Analog Jacks prompt and Audio Out parameter settings have no effect when the RT 10 is not using the analog audio output connectors Note the following e The Analog Jacks prompt and Audio Out parameter can be used to select the desired audio output format as long as a compatible audio track is selected on the loaded disc Refer to page 4 7 for information about audio track selection e When the Analog Jacks prompt is set to 2 Channel the Setup Navigator proceeds to the Digital Jack prompt next page When set to 5 1 Channel the Setup Navigator proceeds to the Center Speaker prompt next column Audiol A2 Videol V2 Language Setup Navigator Amp Connection Surrou
25. password before the RT 10 will activate playback mode when a disc encoded with an incompatible country code is loaded The Country Code control has no effect when the Level control is set within its 1 to 8 range or when a disc that is not encoded with a country code is loaded Refer to the table on page A 16 To assign a country code When the Country Code control is selected the assigned password must be entered before a country code can be assigned When the current password is confirmed the Parental Lock Country Code screen shown above opens on the on screen display 1 When the Parental Lock Country Code screen opens use one of the following methods to select the desired country code a Press the remote control and arrows to scroll through the complete list of available countries When the desired country is highlighted press the remote control ENTER button to select that country and return to the General tab ENTER Audiol A2 Video1 V2 Language Country Code List of Codes Code 0 2 2 1 1 e a LJ av Iu Move Return SETUP Mais ENTER Select b Press the remote control arrow to move the cursor to the first character space that appears on the right of the on screen display Then use the remote control number buttons to enter the numeric code for the desired country Refer to the table on page A 16 to determine the appropriate numeric code When the desired country is selected
26. play e Some discs do not allow video output format device screen formatting the aspect ratio of the video output i adjustments format to match the aspect ratio of the display device Aspect ratios which refer to width relative to height differ among video output formats and display devices A 16 9 aspect ratio is almost twice as wide as high and a 4 3 aspect ratio is almost square Select Widescreen 16 9 if the associated display device screen has a 16 9 aspect ratio Select Standard 4 3 if the associated display device screen has a 4 3 aspect ratio The appearance of the picture depends on the TV Type prompt setting the video output format the loaded disc and display device settings The TV Type prompt is associated with the Video1 tab TV Screen parameter 3 25 The TV Type prompt Widescreen 16 9 setting is equivalent to the TV Screen parameter 16 9 Wide setting and the TV Type prompt Standard 4 3 setting is equivalent to the TV Screen parameter 4 3 Letter Box setting The TV Screen parameter also offers settings for 16 9 Compressed and 4 3 Pan amp Scan viewing Refer to the table on pages 3 25 and 3 26 for more information e Neither the TV Type prompt nor the TV Screen parameter can be adjusted when the RT 10 is in playback mode Analog Jacks 2 Channel 5 1 Channel Not Connected Controls analog audio output format when the RT 10 is using the analog audio output connectors Select Not Connected if the RT 10
27. 1 N ad When playback is activated press the remote control RANDOM button e f a DVD is loaded one of the Random bars shown above will open at the top of the on screen display The Random bar indicates the selected random playback mode Proceed to step 2 e f another disc format is loaded random track playback will automatically activate beginning with the currently playing track The instructions end here e f the Random bar does not open at the top of the on screen display random playback might not be available for the loaded disc The table on page 4 12 indicates the random playback modes available for each disc format When the Random bar opens press the RANDOM button again the cycle through all random playback modes available for the loaded disc When the desired random playback mode is selected press the Play button or the remote control ENTER button to activate the selected random playback mode e Select Random Off to deactivate random playback 4 When random playback is in progress e Press the remote control PREV button to return to the beginning of the currently playing title chapter group or track e Press the remote control NEXT button to skip to the beginning of the next randomly selected title chapter group or track For instance when random chapter playback is activated pressing the NEXT button skips to the beginning of the next randomly selected chapter To deactivate random playbac
28. 3 30 3 31 Mosquito Noise Reduction MNR Parameter 3 30 3 31 MP3 Navigator 4 4 ill 4 27 ill MPEG Out Parameter 3 3 3 11 3 14 N Navigating Disc Menus 4 3 to 4 6 NEXT Button 2 17 4 6 4 18 4 19 4 21 Number Buttons Remote Control 2 15 4 5 4 22 3 53 O On Off Button 2 2 On Screen Display Parameter 3 29 3 35 Open Close Button 2 3 2 15 Operating Temperature RT 10 A 3 Operation Considerations Remote Control 2 14 OSD Language Parameter 3 3 3 36 Prompt 3 3 3 4 Output Impedance Video A 3 Output Level s Audio Specifications A 2 Setting Variable 3 21 to 3 23 Video Specifications A 3 P Parental Lock Controls 3 41 3 42 to 3 47 A 11 to A 13 screens Password Control 3 42 to 3 45 A 11 to A 12 screens Pause Button 2 4 2 18 3 53 4 15 4 16 4 17 4 22 Mode 2 4 2 5 2 7 2 17 2 18 4 12 4 15 4 16 Peritel or Euro TV A V Output 2 10 2 12 to 2 13 3 27 A 3 Playback Icons 4 2 Mode 4 11 4 12 Modes 4 11 to 4 36 Troubleshooting 5 7 to 5 9 5 12 to 5 15 Power Button 2 15 Consumption A 3 Requirements A 3 PREV Button 2 17 4 6 4 18 4 19 4 21 Index continues on page l 4 1 3 n dex continued P continued Product Registration 1 3 Prog Motion Parameter 3 31 3 34 Program Button 2 16 4 5 4 17 4 22 4 23 4 24 4 25 4 26 4 27 Memory Parameter 4 23 4 24 4 25 Mode 2 16 4 12 4 22 to 4 28 PROGRESSIVE Indicator 2 7 Pro
29. 3 45 to 3 46 Selecting Disc Settings 4 7 to 4 11 SETUP Button 2 15 3 4 3 9 3 52 Setup Menu Mode Parameter 3 9 to 3 10 Overview 3 9 to 3 49 S continued Setup Menu Screens A 4 to A 13 ills Shortcuts 3 50 Troubleshooting 5 9 to 5 12 Setup Navigator Overview 3 2 to 3 9 Prompt 3 3 3 4 Prompts 3 3 to 3 9 Sharpness Mid Parameter 3 30 3 31 High Parameter 3 30 3 31 Signal to Noise Ratio Audio Signals A 2 Video Signals A 3 Sizes Setting Speaker 3 19 to 3 20 Slow Playback 2 5 2 17 4 12 4 16 to 4 17 Speaker Distances Setting 3 20 to 3 21 Setting Parameter 3 3 3 16 3 18 to 3 21 Setting Screens A 7 ills Sizes Setting 3 19 to 3 20 Specifications A 2 to A 3 Standby LED 2 2 to 2 3 Mode 2 2 to 2 3 2 10 2 11 2 15 3 52 5 2 Still Frame Playback 4 12 4 15 Still Picture Parameter 3 29 3 35 Stop Button 2 4 2 16 3 53 4 14 4 17 4 19 4 21 5 16 Mode 2 4 2 16 4 12 4 14 Subtitle Button 2 18 4 6 4 8 Display Parameter 3 36 3 40 to 3 41 Language Parameter 3 36 3 38 to 3 39 Languages Selecting 2 18 4 8 Off Parameter 3 36 3 41 1 4 S continued Sub woofer Prompt 3 3 3 7 Surround Speakers Prompt 3 3 3 6 SW Parameter 3 18 3 22 T Table of Contents iv to v THD Noise A 2 Test Tones Activating 3 22 3 23 Tri OP H iz Indicator 2 6 FAL Indicator 2 7 TOP MENU Button 2 16 4 5 Trigger Input Connector 2 11 Control 2 11 Input Switch 2 10 t
30. 3 CLEAR 4 5 6 10 9 7 RETURN PROGRAM SEARCH TOP MENU F MEMO VIDEO ADJ A B REPEAT DISPLAY ANGLE SUBTITLE AUDIO LAST MEMO c Sd Ee E exicon Button 6 NEXT Command Skips to the beginning of the current chapter or track Subsequent presses skip to the beginning of the previous chapter or track When the RT 10 loads the selection playback or pause mode reactivates from the beginning of the selected chapter or track Skips to the beginning of the next chapter or track Subsequent presses also skip to the beginning of the next chapter or track When the RT 10 loads the selection playback or pause mode reactivates from the beginning of the selected chapter or track 17 4 When playback is activated pressing the button scans through the loaded disc in reverse direction Subsequent presses cycle through available scanning speeds The button scans at three speeds The front panel button scans at one speed Pressing the Play button reactivates playback at the current playback time When pause mode is activated pressing and releasing the button activates frame by frame playback in reverse direction When the button is released pause mode reactivates at the current playback time When pause mode is activated pressing and holding the button for 1 second activates slow playback in reverse direction at 1 16 regular playback speed When slow playback is activ
31. All bookmarks are automatically deleted when factory default settings are restored SETUP MENU ISSUES The Setup Navigator automatically activates when the Setup Menu is opened 1 When factory default settings are restored the Setup Navigator prompt 3 4 automatically opens on the on screen display whenever the remote control SETUP button is pressed while stop mode is activated If this occurs select the Auto Start Off setting The Setup menu does not include some parameters 1 Make sure the Setup Menu Mode parameter 3 9 and 3 42 is set to Expert When the Setup Menu Mode parameter is set to Basic the Setup menu is displayed in basic mode which only includes parameters that are required to configure the most common RT 10 settings 2 The RT 10 is manufactured for sale in several different countries Certain parameters are not available on some versions Setup menu parameters cannot be adjusted 1 Certain parameters cannot be adjusted when some playback modes are activated In addition certain parameters can be adjusted when playback is activated although the setting does not take effect until stop mode is activated 2 Certain parameters cannot be adjusted when some disc for mats are loaded 3 11 Setup Menu Issues continues on page 5 10 5 9 Troubleshooting amp Maintenance Lexicon Setup Menu Issues continued from page 5 9 Setup menu parameter settings are cancelled 1 Parameter set
32. Company Manufactured under license from Digital Theater Systems Inc U S Pat No 5 451 942 5 956 674 5 974 380 5 978 762 and other world wide patents issued and Sen bx pending DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems Inc O 1996 2000 Digital Theater Systems Inc All rights reserved Bedford MA 01730 1413 USA Tel 781 280 0300 This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Fax 781 280 0490 nlii eum Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Customer Support Tel 781 280 0300 2003 Lexicon Inc All rights reserved Fax 781 280 0495 Sales Fax 781 280 0499 Service m This document should not be construed as a commitment on the part of Lexicon Inc The information it contains is subject to change without notice Lexicon Inc Lexicon Part No 070 15658 Rev 0 01 03 assumes no responsibility for errors that may appear within this document Introduction Lexicon Introduction Section 1 Getting Started Documentation Conventions llle iii About the RT 10 2 042 e000 ous aaa
33. Language English Audio Language English Subtitle Language English Auto Language On Setup subtitle and audio language A Move Exit Audiol A2 V2 Language General TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out S2 Frame Search Off Screen Saver Off ap Ou Move SETUP M4 Audiol A2 Videol V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single Dal Move Exit Audiol A2 V2 Language General TV Screen 16 9 Wide Component Video Progressive Video Out Video ONO Adjust video format quality EBAY Move Exit Audiol A2 Videol V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock Off us DOther setups ELAY Move SETUP ad A 5 Appendix Lexicon Audio 1 amp 2 Tabs Audioi EINEN Language General Audio DRC i Dolby Digital Out BOn DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area EBAY Move SETUP MS Xs Audioi EINEN Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out EEO MPEG Out liDown Sample Off Digital Out On SACD Playback 2ch Area EBAY Move SETUP ASAS Audioi PARE ESINA Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS O
34. Make sure the Program Memory parameter is set to On When this parameter is set to On program lists for the loaded disc are stored until factory default settings are restored When set to Off program lists for the loaded disc are automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off or factory default settings are restored Program list modifications are not saved 1 Program tabs automatically close a few seconds after the last command is received When this occurs all program list modifications that have not been previously stored will be deleted Program playback is in progress and playback of a non programmed chapter or track begins When playback of a program chapter or program track list is activated playback of a non programmed chapter or track might activate while the RT 10 searches for the next programmed chapter or track Search mode will not activate 1 Make sure the search mode is compatible with the loaded disc The table on page 4 12 indicates the search modes that are available for each disc format Close the disc menu Some search modes might not activate when the disc menu is open on the on screen display If frame time search mode is selected e Activate playback or pause mode Frame time search mode is not available when stop or resume mode is activated e Make sure the Frame Search parameter 3 28 is set to On frame time search mode is
35. Rear Panel OvervieW id aaa E Rata k 2 8 Rear Panel Connections Remote Control Overview aes cda A AAA RR RO 2 14 Operation Considerations e Command Matrix Basic Operation Lexicon FRONT PANEL OVERVIEW 1 On Off Button Connects power from the AC input connector to the RT 10 When the RT 10 is powered on pressing the On Off button powers the RT 10 off and automatically deactivates standby mode When the RT 10 is powered off pressing the On Off button powers the RT 10 on When the RT 10 is powered on standby mode is deactivated even if standby mode was activated when the RT 10 was powered off The On Off button cannot be used to activate standby mode 2 Standby LED Lights to indicate that standby mode is activated Standby mode can be activated and deactivated with the remote control POWER button or with an associated component connected to the RT 10 trigger input connector Standby mode is automatically activated after 30 minutes of non use when the AUTO_P parameter 3 52 is set to ON_30MIN When the RT 10 is not configured for trigger control the remote control POWER button can be used to activate and deactivate standby mode When the RT 10 is configured for 2 2 RT 10 Basic Operation trigger control the associated component connected to the RT 10 trigger input connector can be used to activate and deactivate standby mode When the RT 10 is powered off standby mode is automatically deactivated
36. Setup menu Select Start to activate the Setup Navigator and proceed to the OSD Language prompt 3 4 The Setup Navigator parameter is associated with the Setup Navigator prompt 3 4 Audiol A2 Videol V2 I II ETE General Setup Menu Mode Expert Setup Navigator 2 Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single EBAY ove SETUP zii Parental Lock Opens the Password Level and Country Code controls which can be used to assign a user defined password that must be entered before the RT 10 will activate playback mode when a disc encoded with a user defined security level is loaded These controls have no effect when a disc that is not encoded with a security level or country code is loaded Password Level Country Code Control Default Setting Possible Settings Password None None User Defined Level off us off country code e 1to8 Country Code us 2119 Refer to the table on page A 16 Auser defined password must be selected before the Level and Country Code controls can be adjusted 3 42 RT 10 Setup Menus M ENTER Audiol A2 Video1l V2 Language Setup Menu Mode Expert Setup Navigator Array Password Bonus Group Auto Disc Menu Group Playback Single r me Move Sedi SETUP Metis Password Assigns a user defined password that must be entered before the RT 10 will activate playback mode when a
37. activated e Audio automatically mutes when stop mode is activated To activate stop mode When playback is activated press the Stop button In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time RESUME MODE STOP e The front panel and remote control Stop button can be used to activate resume mode which pauses playback at the current playback time Later playback can be reactivated from this playback time e Audio automatically mutes when resume mode is activated To activate resume mode When playback is activated press the Stop button The Resume bar shown below will open at the top of the on screen display to indicate that resume mode is activated e f the Resume bar does not appear on the on screen display resume mode might not be available for the loaded disc The table on page 4 12 indicates the playback modes available for each disc format Resume To deactivate resume mode e Press the Play button to reactivate playback at the current playback time e Press the Stop button to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time RI 10 Playback Controls PAUSE MODE GD The front panel and remote control Pause button can be used to activate pause mode which pauses playback at the current playback time In some
38. all available slow playback speeds 1 16 1 8 1 4 or 1 2 regular playback speed To deactivate slow playback Press the Play button to activate playback at the current playback time Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time 4 16 RI 10 Playback Controls e Press the Pause button or the opposite skip scan button i e the button if forward slow playback is activated to pause playback at the current disc location RANDOM PLAYBACK RANDOM e The remote control RANDOM button can be used to activate random playback which plays the loaded disc in a random order of titles chapters groups or tracks The table on page 4 12 indicates the random playback modes available for each disc format e Random playback is not available for Video CDs and SVCDs that include PBC menus e Random playback is automatically deactivated when repeat playback or program mode is activated the remote control CLEAR STOP REPEAT or PROGRAM button is pressed Random Playback Modes Title Activates playback of the loaded disc in a random order of titles beginning with the currently playing title When the loaded disc includes just one title activating random title playback repeats playback of that title Chapter Activates pla
39. are not included on the loaded disc include tracks from different groups Program lists are automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off with the front panel On Off button factory default settings are restored SACD Audio CD amp CD RW R One program track list per disc Program lists cannot include more than 24 entries including tracks and pauses include values 100 and above include values that are not included on the loaded disc Program lists are automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off with the front panel On Off button factory default settings are restored Video CD amp SVCD MP3 One program track list per disc One program track list per disc which can be created with the MP3 Program tab 4 25 or the MP3 Navigator 4 27 Program lists cannot be created when playback or pause mode is activated include more than 24 entries including tracks and pauses include values 100 and above include values that are not included on the loaded disc Program lists cannot be created when playback or pause mode is activated include more than 24 entries including tracks and pauses include values 100 and above include values that are not included on the loaded disc Program lists are automatically deleted when the disc drawe
40. arrow to reopen the Gain Setting screen When the Gain Setting screen opens press the a and v arrows to highlight the desired parameter If the corresponding test tone parameter has been set to Auto or On a test tone will pass through the associated channel e To hear the test tone again press the and arrows to reselect the parameter Note Test tones automatically mute when the Lexicon screen saver appears on the on screen display To avoid this set the Screen Saver parameter 3 28 to Off while variable output levels are calibrated Test tones also mute when playback mode is activated When the desired parameter is highlighted press the 4 and arrows to cycle through available settings When the desired setting is selected press the and arrows to highlight the Gain Setting option at the top of the on screen display Then press the remote control ENTER button to return to the Setup menu 3 23 Setup Menus Lexicon Audio2 continued from page 3 23 Eg udio2 Video1 V2 Language General Audio Out 2 Channel Speaker Setting Gain Setting Fix CD Digital Direct MoJ Off CI Y Move SETUP Mais CD Digital Direct On Off Prevents DTS encoded CDs from outputting digital noise This parameter has no effect on other disc formats and input sources When On is selected the RT 10 prevents DTS encoded CDs from outputting digital noise When Off is selected the RT 10 might not preven
41. automatically activate from the selected camera angle 3 When the desired camera angle is selected press the Play button or the remote control ENTER button to activate playback from the selected camera angle 4 9 Playback Controls Lexicon STORING DISC SETTINGS CONDITION MEMO Pressing the remote control CONDITION MEMO button activates condition memory mode which stores preferred disc settings for up to 15 DVD Vs Once stored these settings will be automatically recalled whenever the disc is loaded Preferred disc settings can be stored for DVD Vs that allow the selection of on screen display disc menu language audio track audio language and output format subtitle language camera angle Video Adjust or parental security level settings Preferred disc settings cannot be stored for other disc formats or for DVD Vs that do not allow at least one of these selections Preferred disc settings cannot be stored for selections the loaded DVD V does not allow For instance if the loaded DVD V does not allow selection of an on screen display disc menu language setting a preferred on screen display disc menu language setting cannot be stored However preferred disc settings can still be stored for other selections the loaded DVD V allows Preferred disc settings can be stored for up to 15 DVD Vs The oldest set of preferred disc settings is automatically deleted when the sixteenth set of preferred disc settings is st
42. been dropped damaged exposed to liquids or if it exhibits a distinct change in performance indicating the need for service This unit should only be opened by qualified service personnel Removing covers will expose you to hazardous voltages This triangle which appears on your component alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock and maintenance instructions in this accompanying literature 1 This triangle which appears on your component alerts you to important operating WICHTIGE SICHERHEITSHINWEISE Bewahren Sie diese Anleitungen zur sp teren Benutzung auf Befolgen Sie alle Anleitungen und alle Warnhinweise auf dem Ger t Betreiben Sie das Ger t immer mit der korrekten Netzspannung Angaben ber den Strombedarf entnehmen Sie bitte den Betriebsanweisungen des Herstellers Bei unterschiedlichen Betriebsspannungen kann die Verwendung anderer Netzkabel und oder AnschluBstecker erforderlich werden Bauen Sie das Ger t nie in ein unbel ftetes Rack oder direkt ber W rme erzeugenden Ger ten wie Verst rkern ein Beachten Sie die in der Produktspezifikation aufgef hrte maximale Umgebungstemperatur f r den Betrieb Schlitze und Offnungen in der Box dienen der Bel ftung damit das Ger t zuverlassig l uft und sich nicht berhitzt Diese Offnungen d rfen nicht abgedeckt oder blockiert werden Auch d rfen keine Gegenst n
43. disc subtitle language Select Other to choose a language other than English French German Italian or Spanish The DVD format recognizes 136 different languages which are listed in the table that begins on page A 14 When Other is selected the Subtitle Language screen shown above opens on the on screen display To select an Other language 1 When the Subtitle Language screen opens use one of the following methods to select the desired language a Press the remote control and arrows to scroll through the complete list of available languages When the desired language is highlighted press the remote control ENTER button to select this language and return to the Language tab Audiol A2 Videol V2 Language eui Subtitle Language List of Languages Code 0 2 a oJ 5 a 4 Ld av Return Move ENE SETUP fonda b Press the remote control arrow to move the cursor to the first character space that appears on the right of the on screen display Then use the remote control number buttons to enter the numeric code for the desired language Refer to the table that begins on page A 14 to determine the appropriate numeric code When the desired language is selected press the remote control ENTER button to return to the Language tab Note the following e In most cases subtitles do not appear on the on screen display when the Subtitle Display parameter 3 40 is set to Off regardless of the Subtitle Lan
44. eure w Subtitle Language I English i French IGerman Italian LEPE BOther SETUP Ml Language esurire Code 0 2 FERE v av CID Move Return ENTER EEC SETUP la Audiol A2 Videol V2 Language esurire OSD Language English Audio Language English Subtitle Language Auto Language EiGerman DVD Language liitalian Subtitle Display BiSpanish Subtitle Off HOther EBAY Move SETUP Mais Audiol A2 Videol V2 Language esurire OSD Language English Audio Language English Subtitle Language English Auto Language On DVD Language On Subtitle Display o Subtitle Off BAssist Subtitle SETUP Maxis Audiol A2 Videol V2 Language esurire D Language List of Languages FERE v Code 0 2 au CID Move Return ENTER EEC SETUP a A 10 RT 10 Appendix General Tab Audiol A2 Video1 V2 Language Setup Menu Mode Setup Navigator Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single E IX LS Audiol A2 Video1 V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock Off Bonus Group A Auto Disc Menu On Group Playback Single Parental Lock Password Screens Audiol A2 Video1 V2 Language Setup Menu Mode Expert Setup Navigator AI TS Password Bonus Group Auto Disc Menu Group Playback Single DOY Move Select Audiol A2 Video1 V2 ENE General Setup M
45. includes browsable pictures provided the loaded disc includes a PBC menu Disc Menu Command Matrix continues on page 4 6 4 5 Playback Controls Lexicon Disc Menu Command Matrix continued from page 4 5 Button DVD V amp DVD A DVD RW R Video CD amp SVCD MP3 2 E y Scroll upward and downward through disc menu Same as DVD V amp DVD A Perform no function When the folder list is selected items In some cases pressing the and w arrows pressing the a and arrows scrolls left and right through menu items scrolls upward and downward through the folder list When the track list is selected pressing the a and arrows scrolls upward and downward through the track list amp Scroll left and right through disc menu items In Toggle between the Original List Perform no function Toggle between the folder and some cases pressing the and arrows scrolls and Play List screens when all of track lists upward and downward through menu items the following conditions are met The loaded disc includes Original List and Play List screens Stop mode is activated No menu items are selected When a menu item is selected pressing the 4 arrow activates playback at the first frame of the selected menu item PREV Closes the current disc menu screen and opens the Same as DVD V amp DVD A Same as DVD V amp DVD A Perform no function previous menu screen When the first men
46. indude PBC menus These modes are available for DVD As that include browsable pictures 4 12 RI 10 Playback Controls LAST MEMORY PLAYBACK LAST MEMO D The remote control LAST MEMO button can be used to activate last memory playback which creates a bookmark at the current playback time Later playback can be reactivated from the bookmarked playback time Bookmarks can be stored for up to five discs The oldest bookmark is automatically deleted when the sixth bookmark is stored Video CD bookmarks are automatically deleted when the disc drawer is opened or the RT 10 is powered off with the front panel On Off button All bookmarks are automatically deleted when factory default settings are restored To create a bookmark at the current playback time When playback is activated press the LAST MEMO button The Last Memory bar shown below will open at the top of the on screen display to indicate that a bookmark has been created at the current playback time When the LAST MEMO button is pressed and held the Condition Memory bar shown on page 4 10 will open at the top of the on screen display If this occurs press the remote control CONDITION MEMO button to close the Condition Memory bar Last Memory To activate playback from a bookmarked playback time 1 2 Make sure a disc for which a bookmark has been created is loaded e f playback automatically activates press the Stop button to activate stop
47. information 2 0 e c a a 3 al m Opens the Audio bar which can be used to select the desired audio track audio language and output format on the loaded disc 4 7 Opens the Subtitle bar which can be used to select the desired subtitle language 4 8 Opens the Angle bar which can be used to select the desired camera angle 4 9 Activates display mode 4 30 which opens an on screen display screen or bar that provides information about the loaded disc 2 7 F MEMO 9 Creates up to five shortcuts for frequently adjusted Setup menu parameters 3 50 Activates last memory playback 4 13 which creates a bookmark at the current playback time Later playback can be reactivated from the bookmarked playback time 2 18 3 r Setup Menus Control Bal 13a ae SORS a PERSE RAS NE VATER E E ERE 3 2 Setup INGVIGBEDE s a dci e de dE ok dec ee o do dH RR E Ede Re Rol ee de d 3 2 Set p MENU 5 2 4 4 P AAA A 3 9 Audiol e Audio2 e Videol e Video2 e Language General Setup Menu Shortcuts cr Gee OA ee ECC Hae RA 3 50 Advanced Setup Menu a s cree p Rl OR obs RU ae a 3 51 Setup Menus Lexicon Note The Setup menu should be used to configure the RT 10 before attempting disc playback CONTROL BAR When a Setup menu screen is open a control bar similar to the one shown below appears at the bottom of the on screen display to indicate which remote control but
48. not available when the Frame Search parameter is set to Off e Some discs do not allow frame time searches Some frames are skipped during frame by frame playback or frame time search mode does not find the selected frame number 1 Make sure frame by frame playback or frame time search mode is available for the loaded disc The table on page 4 12 indicates the playback modes available for each disc format 5 14 RT 10 Troubleshooting amp Maintenance If the loaded disc was recorded in 24 frames per second progressive scan format the RT 10 misses one in six frames Because of this frame numbers appear discontinuous and the frame time search mode might not find the selected frame MISCELLANEOUS ISSUES The RT 10 is exhibiting erratic behavior 1 Press the front panel On Off button to power the RT 10 off Wait 10 seconds Then press the On Off button again to power the RT 10 on Record all user defined settings on the installation worksheet that begins on page A 17 Then follow the instructions on page 5 16 to restore factory default settings If all else fails 1 Press the front panel On Off button to power the RT 10 off Wait 10 seconds Then press the On Off button again to power the RT 10 on Record all user defined settings on the installation worksheet that begins on page A 17 Then follow the instructions on page 5 16 to restore factory default settings Contact an authorized
49. progress some time information i e playback time will The RT 10 recognizes a maximum of 250 folders not display when an unfinalized disc is loaded MP3 tracks recorded in MPEG 1 Audio Layer 3 format with a 44 1 or 48kHz sample rate MP3 tracks that are named with a mp3 or MP3 extension The first eight characters of folder and track names excluding the extension appear on the on screen and front panel displays The RT 10 does not support MP3 tracks that do not meet ALL of the requirements listed above MP3 tracks recorded on DVD RW Rs per disc and 250 tracks per folder It ignores all folders and tracks that exceed this number The RT 10 does not support multi session discs It recognizes the first session recorded on the disc and ignores all other sessions The RT 10 supports some VBR Variable Bit Rate tracks although some time information i e playback time will not display when playback of a VBR track is in progress Refer to page 4 11 for information about MP3 playback 1 7 Getting Started Lexicon Disc Compatibility continued from page 1 7 DISCS TO AVOID The RT 10 is compatible with 5 inch 12cm and 3 inch 8cm conventional round discs Do not attempt to load discs with other size and shape characteristics such as those shown below All discs must align with the circular guide inside the disc drawer DISC CARE amp HANDLING Discs require special care and h
50. scan component video output is available on all component video output connectors Compared to interlaced video signals progressive scan video signals double the amount of video information sent to a compatible display device For highest picture quality it is recommended to use a progressive scan compatible display device Note Progressive scan component video output is only available for NTSC discs When a component video output connection is not possible it is recommended to use an S video output connection which provides better picture quality than a composite video output connection All versions offer S video output on an S video output connector S video cables can be difficult to connect Because these cable plugs are keyed it is important to insert them with the proper orientation to the connector Make sure the cable plug is properly aligned with the connector before the cable plug is inserted In addition make sure the cable plug is fully inserted for a solid connection When neither a component nor S video output connection is possible use a composite video output connection All versions offer composite video output on an RCA connector Some versions also offer composite video output on a Euro or Peritel TV A V connector below Euro or Peritel TV A V Connections Some versions include a Euro or Peritel TV A V connector that offers composite S video or RGB video and two channels of audio output on a
51. screen display The selected playback mode will not activate 1 Make sure the playback mode is compatible with the the loaded disc The table on page 4 12 indicates the playback modes available for each disc format Some playback modes are automatically deactivated when certain remote control buttons are pressed Refer to Section 4 for more information Playback will not activate when a DVD RW R is loaded A The DVD RW R might be copy once protected 1 6 The RT 10 does not allow playback of copy once protected discs When a copy once protected disc is loaded the message COPY PROTECT PROGRAM UNPLAYABLE appears on the on screen display Playback automatically stops when an DVD A is loaded 1 The disc might have been illegally copied The RT 10 does not allow playback of DVD As that have been illegally copied Playback activates for the selected SACD track but the output format is incorrect 1 Make sure the SACD Playback parameter 3 15 is set to the desired SACD output format Make sure the loaded SACD includes the selected track If the SACD Playback parameter 3 15 is set to a track that is not available on the loaded SACD the RT 10 automatically selects an alternate track Playback will not activate when an MP3 is loaded 2 An incompatible MP3 track might be selected 1 7 When the MP3 Navigator 4 4 and 4 27 is open and S an incompatible MP3 track is selected the icon shown at the rig
52. second digit For instance entering a value of 25 requires a button sequence of 10 10 and 5 Basic Operation Lexicon OPEN VIDEO CLOSE ON OFF DIMMER POWER 1 2 3 CLEAR SE 4 5 6 10 9 7 RETURN PROGRAM SEARCH TOP MENU RANDOM r dl gt F MEMO VIDEO ADJ A B REPEAT DISPLAY ANGLE SUBTITLE AUDIO LAST MEMO BD o ke exicon Button e 9 e 10 r 11 ES Command Opens and closes the Setup 3 9 and Advanced Setup 3 51 menus Closes certain Setup menu screens without saving changes Refer to Section 3 for more information Activates program mode 4 22 which creates a program list for the loaded disc When a program list has been created program mode also activates program playback Activates search mode 4 28 which activates playback of a specific title chapter group track folder time frame or page on the loaded disc Open the disc menu or top menu provided the loaded disc includes a menu In some cases pressing the MENU and TOP MENU buttons opens the same menu In some cases a specific button must be pressed to open the menu For instance the TOP MENU button must be pressed to open DVD A top menus Refer to the Disc Menu Command Matrix on pages 4 5 and 4 6 for more information N 0 0 O When the Setup or Advanced Setup menu is open pressing the ENTER button selects the highlighted parameter or setting When certain playback modes
53. the MC 12 or MC 8 Digital Controller was used to configure speaker settings make sure the CUSTOM SETUP menu CENTER parameter is set to NONE RT 10 Troubleshooting amp Maintenance RF interference is present in the audio output 1 Make sure the RT 10 is not positioned near unshielded TV or FM antennas cable TV decoders and other RF emitting devices that might cause interference Replace unshielded cables with shielded cables whenever possible Volume level seems to differ between DVDs and CDs 1 DVDs and CDs are recorded with different processes which might cause them to output audio at different volume levels The RT 10 will not pass Dolby Digital DTS or MPEG signals to the associated component 1 Make sure the Dolby Digital DTS and MPEG parameter 3 12 to 3 14 settings are compatible with the associated component For instance the Dolby Digital parameter should be set to Dolby Digital if the associated component is compatible with Dolby Digital sources and to Dolby Digital PCM if the associated component is not compatible with Dolby Digital sources Make sure all associated components are configured with the correct settings PLAYBACK ISSUES The disc drawer automatically opens when a disc is loaded Ts Make sure a compatible disc is loaded The RT 10 is compatible with 5 inch 12cm and 3 inch 8cm conventional round discs Do not attempt to load discs with other size and shape charac
54. the front panel Display Off button or the remote control DIMMER button to activate the front panel display for 3 seconds When stop mode is activated the front panel display remains activated until playback resumes The video output connectors remain deactivated until the DISP MODE parameter is set to DISP OFF Select DISP OFF to activate the front panel display and rear panel video output connectors during SACD CD and MP3 playback The front panel display and rear panel video output connectors will function as normal Note The DISP MODE parameter might not function as described with some SACDs CDs or MP3s If this occurs set the DISP MODE parameter to DISP OFF so the front panel display and rear panel video output connectors will function as normal AUTO P ON 30MIN OFF Enables and disables automatic standby mode activation When ON 30MIN is selected the RT 10 automatically activates standby mode after 30 minutes of non use When OFF is selected the RT 10 does not automatically activate standby mode after 30 minutes of non use 3 52 RT 10 Setup Menus REMOT CODE DVD 1 DVD 2 Assigns a remote control command mode to the RT 10 When DVD 1 is selected the RT 10 can be operated with an RT 10 remote control to which the DVD 1 command mode is also assigned When DVD 2 is selected the RT 10 can be operated with an RT 10 remote control to which the DVD 2 command mode is also assigned Assigning Remote Co
55. the loaded disc and a program chapter list has not been created for the currently playing title Likewise the currently playing group will be added to the end of the program group list when a program group list has been created for the loaded disc and a program track list has not been created for the currently playing group When no program lists have been created for the loaded disc f the last program list modified was a program title or group list a program title or group list will be created beginning with the currently playing title or group If the last program list modified was a program chapter or track list a program chapter or track list will be created beginning with the currently playing chapter or track To delete a non stored program list Note This procedure cannot be used to delete DVD V and DVD RW R program lists that have been previously stored Refer to the next page for instructions to delete DVD V and DVD RW R program lists that have been previously stored Load a disc for which a program list has been created Press the Stop button to activate stop mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated press the remote control CLEAR button to delete the oldest non stored program list 4 26 RI 10 Playback Controls To delete stored DVD V and DVD RW R program lists 1 Load a DVD V or DVD RW R for which a
56. 18 6 13 6 50 5 45 4 16 5 10 3 22 DISPLAY SA 02 4 55 3 18 ie 6 13 6 50 04 5 45 4 16 05 5 10 3 22 1 2 Exit To open a display screen 1 Make sure stop or resume mode is activated 2 When stop or resume mode is activated press the remote control DISPLAY button to open one of the display screens shown above The display screen descriptions on the previous page indicate the display screens available for each disc format To deactivate display mode Press the DISPLAY button to close the display screen 4 31 Playback Controls Lexicon Display Bars 1 Play 15 25 Play Title 85 37 101 02 Tr Rate NENNEN 4 Play 15 25 Play Chapter 0 31 2 52 Track Play Chapter Display Bar A DVD V No Description 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing title and chapter 3 Indicates the elapsed playback time of the currently playing title minutes seconds Indicates the display bar format 5 Indicates the remaining and total playback time of the loaded disc 3 07 3 17 20 15 33 30 Play Group 4 Play Tr Rate 1111 2 3 1 5 15 25 The letters and numbers in the display bar illustrations shown here and at the top of the 2 21 2 52 next page correspond to the numbered items in the tables that begin below 5 Display Bar B DVD V No Description Indicates whether playback or pause mode is activated 2 Indicates the numbers of the cu
57. 4 Button 2 15 4 5 4 22 5 Button 2 15 4 5 4 22 sta i UH Indicator 2 7 6 Button 2 15 4 5 4 22 7 Button 2 15 4 5 4 22 8 Button 2 15 4 5 4 22 9 Button 2 15 4 5 4 22 96kHz Indicator 2 7 PCM Audio Prompt 3 3 3 8 3 14 A A B Button 2 18 4 19 4 21 4 22 Repeat Playback 2 18 4 12 4 19 4 21 to 4 22 About the RT 10 1 2 to 1 3 AC Input Connector 2 8 Advanced Setup Menu 2 3 2 16 3 51 to 3 53 4 10 5 12 Analog Audio Output 2 8 2 10 2 11 2 13 3 5 3 6 3 7 3 16 3 17 3 18 3 19 3 20 3 21 3 22 A 2 Jacks Prompt 3 3 3 5 to 3 6 3 16 3 23 Angle s Button 2 18 3 35 4 6 4 9 5 13 Indicator Parameter 3 29 3 35 4 9 Selecting Camera 2 18 4 9 5 13 Arrows Remote Control 2 16 3 2 3 4 3 9 3 52 4 6 4 22 Aspect Ratio 3 5 3 25 to 3 26 Audio 1 Tab 3 11 to 3 15 A 6 ills 2 Tab 3 15 to 3 24 A 6 ills A 7 ills Button 2 18 3 37 4 6 4 7 4 8 A continued Audio DRC Parameter 3 11 3 12 Language Parameter 3 36 3 37 3 39 3 41 3 50 4 7 Out Parameter 2 7 2 10 2 13 3 3 3 16 to 3 17 Output 2 10 2 11 2 13 5 4 to 5 7 A 2 Performance Specifications A 2 Tracks Selecting 2 18 4 7 to 4 8 Auto P Parameter 3 51 3 52 Disc Menu Parameter 3 41 3 49 Language Parameter 3 36 3 39 B Background Parameter 3 29 Bandwidth A 3 Banks Video Adjust 3 34 Basic Mode Setup Menu 3 9 to 3 10 ill A 5 ill Battery Installation Remote Control 1 9 Bla
58. AES EBU XLR 1 coaxial RCA and 1 optical Toslink Sample Rates 44 1 48 88 2 and 96kHz 16 to 24 bits All digital audio output connectors conform to IEC 958 and S PDIF standards Audio Performance D A Conversion 24 bit 192kHz PCM and pure DSD Frequency Response 20Hz to 20kHz 0 5dB 1 0dB at 50kHz reference 1kHz Front L R THD Noise 0 00496 at 1kHz Dynamic Range 100dB Signal to Noise Ratio 100dB Channel Separation 100dB Output Level 2 0V maximum Video Output Connectors Composite e 2 RCA S Video e 1 Component e 2 1 RCA and 1 BNC and 14 pin D connector Specifications are subject to change without notice A 2 RT 10 Appendix Video Performance D A Conversion e 12 bit 108MHz Bandwidth 6MHz Signal to Noise Ratio e 75dB Y output Output Impedance e 750 Output Level 1 0V peak to peak Other A N Euroconnector 21 pin SCART connector IR Input 3 5mm Tip Ring Sleeve Trigger Input 12V DC Detachable screw terminals Power Requirements 120VAC 50 to 60Hz North amp South American models e 230VAC 50 to 60Hz European amp Korean models 100VAC 50 to 60Hz Japanese Model Power Consumption e 20W Dimensions amp Weight e Width 17 3 inches 440mm Height 3 7 inches 94mm Depth 12 2 inches 310mm Weight 17 2 pounds 7 8kg Ope
59. ANS AN If needed use a soft lint free cloth soaked in alcohol or a commercially available DVD or CD cleaning kit to clean the disc Do not use benzene thinner or other cleaning products including those designed to clean vinyl records Refer to the Disc Care amp Handling section that begins on page 1 8 for information about preventative maintenance CAUTION Dirty or damaged discs such as those shown below might affect playback performance or damage the RT 10 Do not attempt to load cracked chipped scratched warped dirty or otherwise damaged discs in the disc drawer RESTORING FACTORY DEFAULT SETTINGS Restoring factory default settings resets all Setup and Advanced Setup menu parameters to their factory default setting and deletes all passwords Setup menu shortcuts bookmarks preferred disc settings and program lists Before restoring factory default settings it is recommended to record all user defined settings on the installation worksheet that begins on page A 17 Note Front panel buttons must be used to restore factory default settings Remote control buttons cannot be used To restore factory default settings 1 Record all user defined settings on the installation worksheet that begins on page A 17 If the RT 10 is powered off proceed to step 3 If the RT 10 is powered on press the front panel On Off button to power the RT 10 off Press and hold the front panel Stop button While h
60. Consulte las instrucciones del fabricante donde se especifican los requisitos de alimentaci n Tenga en cuenta que unas tensiones operativas diferentes pueden precisar de la utilizaci n de diferentes cables de alimentaci n y o enchufes No instale la unidad en un rack sin ventilaci n o directamente sobre equipos que generen calor como amplificadores de potencia Tenga en cuenta la temperatura operativa ambiental m xima que se detalla en las especificaciones del producto Las ranuras y aberturas del equipo son para su ventilaci n para garantizar un funcionamiento fiable y evitar que la unidad se sobrecaliente no bloquee cubra o inserte objetos en las aberturas No derrame nunca l quidos de ning n tipo sobre la unidad Nunca conecte directamente salidas de amplificadores de potencia de audio a ninguno de los conectores de la unidad Para evitar descargas el ctricas o incendios no exponga la unidad a la humedad o la lluvia ni la utilice donde pueda estar expuesta al agua No intente utilizar la unidad si sta ha ca do se ha da ado ha estado expuesta a l quidos 0 si muestra un cambio importante en sus prestaciones lo cual indicar a la necesidad de una reparaci n Dieser Apparat sollte nur von qualifizierten Fachleuten ge ffnet werden Das Esta unidad deber ser abierta nicamente por personal calificado Si usted quita las coberturas se expondr a voltajes peligrosos Este tri ngulo que aparece en su componente a
61. Dolby Digital 5 Dolby Digital PCM DTS Out DTS PCM DTS e DTS PCM Linear PCM Out Down Sample On Down Sample On Down Sample Off 6 MPEG Out Digital Out MPEG gt PCM MPEG MPEG gt PCM On Off SACD Playback 3 9 and 3 42 2ch Area 2ch Area Multi ch Area CD Area These parameters only appear when the Setup menu is displayed in expert mode These settings are recommended when the RT 10 is connected to an MC 12 or MC 8 Digital Controller When no setting is indicated any setting can be selected Audiol continues on page 3 12 Setup Menus Lexicon Audio1 continued from page 3 11 Audio1 ETERNAS Language General Audio DRC eyig Dolby Digital Out BOn DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area EDAP Move SETUP Medis Audio DRC Dynamic Range Control Off On Controls the dynamic range of Dolby Digital encoded sources When On is selected the RT 10 reduces the dynamic range of high level peaks As a result low level sounds become more audible When Off is selected the RT 10 maintains the original dynamic range of low and high level sounds Note This parameter is only effective with Dolby Digital encoded DVDs Its effectiveness varies depending on the loaded disc the speaker configuration and associated component settings
62. Don t Know Audiol A2 Videol V2 Language Setup Navigator Save Changes Exit Setup Navigator Delete Changes Start Again Changes are saved Dal Move Ea SETUP fonds Select No if the associated component is not compatible with 96kHz PCM sources The RT 10 will downsample 96kHz PCM signals to 48kHz before passing them to the associated component Select Yes if the associated component is compatible with 96kHz PCM sources The RT 10 will not downsample 96kHz PCM signals before passing them to the associated component Selecting the 96kHz PCM Audio Don t Know setting has the same effect as selecting the No setting The 96kHz PCM Audio prompt is associated with the Audio1 tab Linear PCM Out parameter which can be set for compatibility with PCM digital audio sources Note The RT 10 always downsamples 192 and 176kHz signals to 96 and 88 2kHz before passing them to the associated component regardless of the 96kHz PCM Audio prompt and Linear PCM Out parameter settings 3 8 RT 10 Setup Menus Exit Setup Navigator Determines whether Setup Navigator prompt settings are saved deleted or reentered Select Save Changes to save prompt settings and close the Setup Navigator Select Delete Changes to delete prompt settings and close the Setup Navigator Select Start Again to reenter prompt settings The OSD Language prompt 3 4 will open on the on screen display The Exit Setup Navigator prompt is not associat
63. E UNIT NAKED FLAME SOURCES MIGHT ACCIDENTALLY FALL DOWN CAUSING FIRE TO SPREAD OVER THE UNIT ATTENTION POUR VITER LES CHOCS LECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON DANTE DE LA PRISE ET POUSSER JUSQU AU FOND CAUTION This product satisfies FCC regulations when shielded cables OUTDOOR ANTENNA GROUNDING and connectors are used to connect the unit to other If an outside antenna or cable system is connected to the product be sure the equipment To prevent electromagnetic interference with antenna or cable system is grounded so as to provide some protection against electric appliances such as radios and televisions use voltage surges and built up static charges Article 810 of the National Electrical shielded cables and connectors for connections Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit A connection to grounding electrodes and requirements for the grounding electrode This equipment has been tested and found to comply with the limits for a See Figure A below Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio Fig
64. ENTER EIS PLAY feu as AU Move ENTER EIS PLAY feu ten soft H 1111 fine Hue green H H red ENTER EI DISPLAY feu as AU Move ENTER ESA DISPLAY eu ten Off MM 111111 max Chroma Level as max ENTER EIS DISPLAY feu as AU Move ENTER ESA DISPLAY eu as min PH max Chroma Delay HH E ENTER EIS PLAY eu as AU Move ENTER ESA S oISPLAY feu as min H max Memory Off E ENTER EI DISPLAY feu as AU Move ENTER KANSE DISPLAY eu ten OIRE 7 5IRE Prog Motion fast H 1111 slow ENTER EI DISPLAY e Ia 9 Move ENTER EIE DISPLAY eu as min to max Chroma Delay Compensates for misalignment of the Y luminance and C chrominance components present in video signals Memory Off 1 2 3 Determines the memory bank in which user defined Video Adjust settings are stored The RT 10 includes three memory banks called 1 2 and 3 To configure and store memory banks 1 Press the remote control VIDEO ADJ button to open the Video Adjust bar shown above first column first row 3 32 RT 10 Setup Menus Page 1 2 Prog Motion fast H 111111 slow Autol INIM Me YNR off 11111 max CNR A max MNR off LEN EM max BNR off 3 111111 max Sharpness High soft H 1111 fine Sharpness Mid soft H 1111 fine Memory Off EPI When the Video Adjust bar opens press the remote control 4 and arrows to highlight the Video Setup option Then press the remote control ENTER button to select this option
65. ETUP ja EN Audio MEN V2 Language General Audio Out 2 Channel Speaker Setting Sta Gain Setting Fix CD Digital Direct Off SETUP je A 6 RT 10 Appendix Speaker Setting EN Aucio MEN V2 Language General Screens Audio Out 2 Channel Speaker Setting Gain Setting Fix 10 0ft CD Digital Direct Off 10 0ft 10 0ft 10 0ft Return 10 0ft Return aDCU Move EE SETUP Eat Distance Ea SETUP leeds EIS dil SETUP leeds H H m ENTER Gain Setting EN 2i02 EREJET HCE e Screens Audio Out 2 Channel Speaker Setting Gain Setting eo PTT Variable 0 0dB 0 0dB 0 0dB 0 0dB 0 0dB 0 0dB Return Return ENTER SIS Se SETUP a ENTER ISTS Clem SETUP da EAU Move SETUP Maja A 7 Appendix Lexicon Video 1 amp 2 Tabs DX SEPA Video NA E ELE Ez TV Screen ERMITA Component Video Pan amp Scan Video Out 16 9 Wide S Video Out R16 9 Compressed Frame Search Off Screen Saver Off EBAY Move SETUP Mais ANIRE YA Videoi NAME EE El TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out LER Frame Search S2 Screen Saver Off EBAY Move SETUP Mais TUYA Video2 Language General On Screen Display Angle Indicator On EBAY Move SETUP Mais DX SEP VAYA Video2 MET NECE ez Background Gray Video Adjust Still Playback to On Screen Display e Angle Indicator
66. Language S Video Out MNR Auto Language Frame Search BNR DVD Language Screen Saver Sharpness High Subtitle Display Sharpness Mid Subtitle Off Video2 Setting Detail Background White Level General Setting Video Adjust Black Level Setup Menu Mode Still Playback Black Setup Setup Navigator On Screen Display Gamma Parental Lock Angle Indicator Hue Bonus Group Refer to the next column for Video Adjust Chroma Level Chroma Delay Auto Disc Menu Group Playback Memory Prog Motion Refer to page A 17 for Setup Navigator Index SYMBOLS 4 Arrow 2 16 3 2 3 4 3 9 3 52 4 6 4 22 v Arrow 2 16 3 2 3 4 3 9 3 52 4 6 4 22 4 Arrow 2 16 3 2 3 4 3 9 4 6 4 22 4 2 5 2 17 4 16 I 2 17 4 6 4 18 4 19 4 21 44 44 2 5 2 17 Arrow 2 16 3 2 3 9 4 6 4 22 Button 2 4 2 16 4 11 Indicator 2 7 2 5 2 17 4 16 i 2 17 4 6 4 18 4 19 4 21 i 2 5 2 17 Il Button 2 4 2 18 3 53 4 15 4 16 4 17 4 22 Indicator 2 7 W Button 2 4 2 16 3 53 4 14 4 17 4 19 4 21 5 16 Indicator 2 6 O Indicator 2 8 2 14 eS Indicator 2 7 3 35 4 9 C Indicator 2 7 amp Icon 3 50 4 2 4 11 Icon 3 50 4 2 V Icon 4 27 5 4 iii vi to x AX iii vi to x NUMBERS 10 Button 2 15 4 5 4 22 4 29 5 3 1 Button 2 15 4 5 4 22 3 53 NUMBERS continued 192kHz Indicator 2 7 2 Button 2 15 4 5 4 22 3 53 3 Button 2 15 4 5 4 22
67. Lexicon dealer Contact Lexicon Customer Service at 781 280 0300 or www lexicon com RT 10 MAINTENANCE The RT 10 exterior surface can be cleaned with a soft dry lint free cloth Do not use a cloth made with steel wool or metal polish Do not soak the cloth in alcohol benzene acetone based cleaners or strong commercial cleaners If the RT 10 is located in a dusty environment a low pressure blower can be used to remove dust from its exterior surface Replace the remote control batteries as needed 1 9 The remote control requires two AA batteries It is strongly recommended to use Alkaline batteries which last longer with out leaking Refer to the Installation Considerations section that begins on page 1 3 for information about preventative maintenance Note The RT 10 lens should not become dirty or damaged from regular use However if malfunction occurs contact an authorized Lexicon dealer for assistance Do not attempt to clean the lens with a commercially available DVD or CD lens cleaner as some of these products might damage the RT 10 lens 5 15 Troubleshooting amp Maintenance Lexicon DISC MAINTENANCE Disc surfaces that have been marked with fingerprints dust or other dirt can be cleaned Use a soft dry lint free cloth to lightly wipe the disc from its center hole to outer edges Wipe with straight strokes as shown below right Do not wipe with circular strokes as shown below left
68. MC 12 or MC 8 Associated components that are NOT compatible with DTS sources will output DTS noise when all of the following conditions are met e ADTS source is present e The Digital Jack prompt is set to Dolby Digital DTS or Dolby D DTS MPEG OR the DTS Out parameter is set to DTS Setup Navigator continues on page 3 8 3 7 Setup Menus Lexicon Setup Navigator continued from page 3 5 Audiol A2 Video1 V2 Language Setup VESTRE Amp Connection 96kHz PCM Audio Yes Don t Know Digital jacks not compatible with 96kHz DA Move EE SETUP ada Digital Jack continued The Digital Jack prompt is associated with the Audiol tab Dolby Digital Out 3 12 DTS Out 3 13 and MPEG Out 3 14 parameters Each parameter can be independently set for compatibility with the respective digital audio source The Digital Jack prompt Dolby Digital Out DTS Out and MPEG Out parameter settings have no effect when the RT 10 is not using the digital audio output connector Note When the Digital Jack prompt is set to Not Connected the Setup Navigator proceeds to the Exit Setup Navigator prompt 3 4 When set to another setting the Setup Navigator proceeds to the 96kHz PCM Audio prompt below 96kHz PCM Audio Controls PCM digital audio output sample rate when the RT 10 is using the digital audio output connector This prompt is not available when the Digital Jack prompt is set to Not Connected No Yes
69. Not Present DSurround speakers are connected to an amplifier r me Move EIS dili SETUP eti Audiol A2 Videol V2 Language Setup Amp Connection 96kHz PCM Audio Yes Don t Know DDigital jacks not compatible with 96kHz r Daa EIS dili SETUP leds Audiol A2 Videol V2 Language Setup CENEJE francais Language Deutsch OSD Language Italiano Espanol DSelect the On Screen Language ECAY Move EIS dili SETUP etis Audiol A2 Videol V2 Language Setup NEVER Amp Connection Analog Jacks EA Channel Not Connected 2 channel jacks for L R aDCW Move EE SETUP eti Audiol A2 Videol V2 Language Amp Connection Sub woofer Not Present DSub woofer is connected to an amplifier r me Move EIS dili SETUP Metis Audiol A2 Videol V2 Language Save Changes Exit Setup Navigator Delete Changes Start Again DChanges are saved r 5e Move EIS dili SETUP lads Audiol A2 Videol V2 Language Setup EWIISE TIS TV Connection IM RITE Widescreen 16 9 Standard DWidescreen TV 16 9 aspect ratio aDCW Move EE SETUP eti Audiol A2 Videol V2 Language Setup NEVER Amp Connection Center Speaker Not Present Center speaker is connected to an amplifier ECAY Move EIS dili SETUP etis Audiol A2 Videol V2 Language Setup Navigator Dolby Digital Dolby Digital DTS Amp Connection Dolby Digital MPEG Digital Jack Dolby D DTS MPEG PCM Not Connected DCompatible with Dolby Digital r me Move EIS dil SETUP eti
70. OOTING Incorrect operation is sometimes mistaken for malfunction If problems occur refer to this section for troubleshooting information or visit www lexicon com for additional troubleshooting information and answers to frequently asked questions If problems persist contact Lexicon Customer Service at 781 280 0300 or www lexicon com POWER ISSUES The RT 10 will not power on La 2 Power the RT 10 on with the front panel On Off button Deactivate standby mode If the RT 10 is not configured for trigger control press the remote control POWER button to deactivate standby mode If the RT 10 is configured for trigger control use component connected to the RT 10 trigger input connector to deactivate standby mode Make sure the power cord is connected to the AC input connector and the electrical outlet Standby mode automatically activates 1 Set the AUTO P parameter 3 52 to OFF When this parameter is set to On the RT 10 automatically activates standby mode after 30 minutes of non use REMOTE CONTROL ISSUES The remote control seems to stop working 1 Make sure the remote control batteries are correctly inserted with the proper polarity 1 9 Replace the remote control batteries 1 9 The remote control requires two AA batteries that should be replaced as needed It is strongly recommended to use Alkaline batteries which last longer without leaking If the RT 10 is not using the IR IN connector make sure th
71. RT 10 is using the digital audio output connector To set speaker sizes and crossover points 1 When the Speaker Size screen opens press the remote control and arrows to highlight the desired parameter arrows to cycle through available settings When the desired setting is selected press the 4 arrow to highlight the Size option at the top of the on screen display Then pressing the arrow to open the Speaker Distance screen or the remote control ENTER button to return to the Setup menu Note the following When setting the C LS and RS parameters select Small to apply a 100Hz crossover point through the associated channel s Select Large to provide full range audio output through the associated channel s Select Off if the associated speaker is not present If the low frequency response of the associated speaker cannot be determined select Small if the main cone of the associated speaker is less than 6 inches 12cm Select Large if the main cone of the associated speaker is greater than 6 inches 12cm Audio2 continues on page 3 20 3 19 Setup Menus Lexicon Audio2 continued from page 3 19 Setting Speaker Sizes continued Note the following The SW parameter determines the presence or absence of a subwoofer Select On if a subwoofer is present The RT 10 will pass subwoofer signals and LFEsignals for which the corresponding Speaker Size parameter is set to Small to the Sub analog
72. SCART connector labeled TV A V CONNECTOR When making this connection use a 21 pin male to male SCART cable with a SCART plug on both ends The Video Out parameter 3 27 controls video output format when the RT 10 is using the Euro or Peritel TV A V connector Refer to the table and illustration at the top of the next page for more information 2 12 RT 10 Basic Operation Euro or Peritel TV A V Connector 2018161412108 6 4 2 19171513119 7 5 3 1 2 5 Description Description Audio Out Right NC NC RGB Red Ground Audio Out Left Mono Ground Audio Ground RGB Red Out Chrominance RGB Blue Ground RGB Switch NC Composite Video Ground RGB Blue Out Ground Audio RGB Switch 16 9 Composite Video Out Luminance RGB Green Ground NC NC Ground Shield Chassis RGB Green Out 1 2 3 4 5 6 7 8 9 1 1 Digital Audio Connections All versions offer digital audio output on S PDIF coaxial S PDIF optical and XLR AES EBU connectors The AES EBU connector offers S PDIF digital audio output with AES EBU electrical characteristics When making S PDIF coaxial connections use a video interconnect cable with RCA plugs on each end Make sure the cable plug is fully inserted for a solid connection When making S PDIF optical connections use an interconnect cable with Toslink amp plugs on each end Because these cable plugs are keyed it is important to insert them with the proper orie
73. Setup menu When the Setup menu is open while the TV Type prompt 3 5 or TV Screen parameter 3 25 is set to a 4 3 format the screen automatically adjusts to 16 9 format widescreen to accommodate the Setup menu When the Setup menu is closed the screen automatically reverts to the selected 4 3 format Make sure the loaded disc allows video output format aspect ratio adjustments The picture on the associated display device screen includes video artifacts 1 Stop executing commands Depending on the format of the loaded disc some commands might cause the picture to disappear or shake If the RT 10 has a component video output connection and the Component Video parameter 3 27 is set to Progressive set the parameter to Interlace The loaded disc might include a copy prevention signal 1 6 The RT 10 is compatible with Macro Vision System copy guard However some discs include a copy prevention signal that produces video artifacts such as stripes in the picture Video Output Issues continues on page 5 4 5 3 Troubleshooting amp Maintenance Lexicon Video Output Issues continued from page 5 3 The picture on the associated display device screen incl 4 RFi udes video artifacts continued The RT 10 is not compatible with all high definition display devices In some cases this connection might produce video artifacts in the picture The RT 10 includes copy protection circuits that migh
74. Stack the RT 10 directly above heat producing components such as power amplifiers and other stereo equipment that generate heat during use Avoid installing the RT 10 near radiators and other heat producing appliances Expose the RT 10 to high temperatures direct sunlight humidity steam smoke dampness and excessive dust Install the RT 10 near unshielded TV or FM antennas cable TV decoders and other RF emitting devices that might cause interference Replace unshielded cables with shielded cables whenever possible Prevent proper cooling Do not block or cover ventilation slots and openings on the RT 10 with items such as newspapers cloths and curtains Do not place the RT 10 on a thick carpet bed sofa or fabric with a thick pile Expose the RT 10 to sudden or drastic temperature changes as this might cause condensation to form on the RT 10 lens Although condensation will not damage the RT 10 it might temporarily impair performance If this occurs allow at least 1 hour for condensation to evaporate before attempting to load a disc Obstruct the front panel display remote control sensor when the RT 10 is not using the IR input connector If the RT 10 is not using the IR IN connector the remote control must be in line of sight with the front panel display remote control sensor Refer to page 2 14 for more information Note The RT 10 lens should not become dirty or damaged from regular use However if malfunction oc
75. TAI Indicates that the last three characters on the character display previous page represent the total playback time 14 gt Indicates that playback 4 11 is activated 15 II Indicates that pause mode 4 15 is activated 16 e Indicates that repeat playback 4 19 is activated 17 FRET Indicates that playback of the video portion of the loaded disc is in progress 18 2 Indicates that playback of a scene recorded from multiple camera angles is in progress Refer to page 4 9 for information Indicates that last memory playback 4 13 is activated 20 COHD Indicates that preferred disc settings have been stored for the loaded disc Refer to page 4 10 for more information 21 E Indicates that the RT 10 video output connectors are deactivated The remote control VIDEO ON OFF button can be used to activate and deactivate all RT 10 video output connectors 2 2 PROGRESSIVE Indicates that the RT 10 component video output connectors are passing progressive scan non interlaced video signals 23 0 FF Indicates that the RT 10 digital audio output connectors are deactivated The Digital Out parameter 3 14 can be used to activate and deactivate all RT 10 digital audio output connectors 24 5 1 CH Indicates that the Audio Out parameter 3 16 is set to 5 1 Channel 25 0 Indicates that the Audio Out parameter 3 16 is set to 2 Channel
76. TUP lara Sub woofer Present Not Present Connected setting all Digital Jack prompt settings assume the Indicates the presence or absence of a subwoofer When Present is selected the RT 10 passes subwoofer signals LFE to the Sub analog audio output connector When Not Present is selected the RT 10 does not redirect low frequency signals to other analog audio output connectors The Sub woofer prompt is associated with the Audio2 tab Speaker Setting option which can be used to set speaker sizes and distances Digital Jack Controls digital audio output format when the RT 10 is using the digital audio output connector Select Not Connected if the RT 10 is not using the digital audio output connector Refer to the table on page 3 3 Select the setting that includes all digital audio sources with which the associated component is compatible The RT 10 will convert all other digital audio signals to PCM signals before passing them to the associated component With the exception of the Not associated component is compatible with PCM signals For example the MC 12 and MC 8 Digital Controllers are compatible with Dolby Digital DTS and PCM digital audio sources If the RT 10 is connected to one of these components select the Dolby Digital DTS setting The RT 10 will pass Dolby Digital DTS and PCM signals directly to the MC 12 or MC 8 The RT 10 will convert all other digital audio signals i e MPEG to PCM before passing them to the
77. The Angle Indicator parameter 3 35 activates and deactivates the indicator When set to On the amp indicator appears on the front panel display when playback of a scene recorded from multiple camera angles is in progress When set to Off the Y indicator does not appear on the front panel display when playback of a scene recorded from multiple camera angles is in progress To select a camera angle 1 When playback is activated press the ANGLE button to open the Angle bar shown below e The Angle bar indicates the number of the selected camera angle and the number of camera angles from which the currently playing scene was recorded For instance the Angle bar shown below indicates that camera angle 1 of 2 is selected Angle 1 2 e If the Angle bar indicates that camera angle 1 of 1 is selected the currently playing scene was recorded from one camera angle In this case camera angle selection is not available e If the Angle bar does not open at the top of the on screen display camera angle selection might not be available for the loaded disc 2 When the Angle bar opens press the ANGLE button again to cycle through all camera angles available for the currently playing scene The remote control number buttons can also be used to enter the number of the desired camera angle if known Note The Angle bar automatically closes a few seconds after the last command is received If this occurs playback will
78. The matrix that begins on the next page describes the commands remote control buttons execute The numbers in the RT 10 remote control illustration shown on the next page correspond to the numbered items in the Command Matrix 2 14 RT 10 Basic Operation ON OFF DIMMER POWER 3 CLEAR RANDOM dl gt F MEMO VIDEO ADJ A B REPEAT DISPLAY ANGLE SUBTITLE AUDIO LAST MEMO c Sd Ee E exicon Button 1 POWER Command Activates and deactivates standby mode when all of the following conditions are met The RT 10 is not configured for trigger control The RT 10 is powered on with the front panel On Off button The trigger input switch is set to OFF When standby mode is deactivated pressing the POWER button activates standby mode and lights the front panel Standby LED 2 2 When standby mode is activated pressing the POWER button deactivates standby mode The Standby LED is not lit when standby mode is deactivated Note the following Power is still supplied to the RT 10 when standby mode is activated 2 DIMMER O Controls the brightness of front panel display characters Pressing this button cycles through 100 75 and off settings When off is selected the front panel Display Off button LED lights Activates and deactivates the rear panel video output connectors including component composite S video and Euro or Peritel TV A V connectors 2 9 and 2 10 When these connectors a
79. VD V allows 5 12 RT 10 Troubleshooting amp Maintenance Preferred disc settings 4 10 are not recalled when a disc is loaded 1 Make sure a DVD V is loaded Preferred disc settings cannot be stored or recalled for other disc formats The preferred disc settings might have been deleted Preferred disc settings can be stored for up to 15 discs The oldest set of preferred settings is automatically deleted when the sixteenth set of preferred settings is stored Preferred disc settings are also deleted when factory default settings are restored The remote control AUDIO button cannot be used to select an audio track 4 7 1 Make sure a DVD V Video CD or MP3 recorded with two or more audio tracks is loaded Audio track selection is not available for other disc formats or for discs recorded with one audio track Activate playback Audio track selection is not available unless playback is activated The disc menu might allow selection of the desired audio track The remote control SUBTITLE button cannot be used to select a subtitle language 4 8 1 2 Make sure a DVD V recorded with subtitles is loaded Subtitle language selection is not available for other disc formats or for discs that are not recorded with subtitles Activate playback Subtitle language selection is not available unless playback is activated 3 The disc menu might allow selection of the desired subtitle language The r
80. When the Video Setup bar opens e Proceed to step 4 to configure memory banks from the Video Setup bars shown on the previous page The Video Setup bars allow Video Adjust parameters to be viewed on 17 separate bars e Press the remote control DISPLAY button to configure memory banks from the Video Setup screens shown above The Video Setup screens allow Video Adjust parameters to be viewed on two screens When the desired Video Setup view is selected press the 4 and arrows to scroll through Video Adjust parameters e When a Video Setup bar is open the selected parameter appears on the bar e When a Video Setup screen is open the selected parameter is highlighted The cursor automatically toggles between the two screens when the last parameter on Page 1 2 or the first parameter on Page 2 2 is passed Page 2 2 off HH 111111 max White Level min eee max Black Level min HAH max Black Setup OIRE 7 5IRE Gamma eee A N E Hue green HAH red Chroma Level min HAATI max Chroma Delay eee Memory Off MIS When the desired parameter is selected press the and gt arrows to adjust the setting When the desired setting is selected press the and arrows to continue scrolling through Video Adjust parameters Repeat steps 4 and 5 until all desired parameter settings have been selected When all desired parameter settings have been selected press the and arrows to select the Memory parameter
81. able for DVD Vs Video CDs and MP3s recorded with two or more audio tracks Audio track selection is not available for other disc formats or for discs recorded with one audio track In addition audio track selection is not available unless playback is activated e DVD V and Video CD audio tracks include an audio language and output format MP3 audio tracks include an output format e Audio track selection has no effect on the Audio Language parameter 3 37 setting To select an audio track When playback is activated press the AUDIO button to open one of the Audio bars shown below e When a DVD V or Video CD is loaded an Audio bar similar to the one shown below will open at the top of the on screen display indicating the audio language and output format in which the selected audio track was recorded For instance the Audio bar shown below indicates that the selected audio track was recorded in English in 2 channel Dolby Digital format Dolby Digital Audio 1 English 2CH e When an MP3 is loaded one of the Audio bars shown below will open at the top of the on screen display indicating the output format in which the selected audio track was recorded stereo mono or 2 channel Audio Stereo Audio 1 L Audio 2 R e If the Audio bar does not open at the top of the on screen display audio track selection might not be available for the loaded disc When the Audio bar opens press the AUDIO button again to
82. ad cracked chipped scratched warped dirty or otherwise damaged discs in the disc drawer RT 10 Getting Started REMOTE CONTROL BATTERY INSTALLATION Figure A The remote control requires two AA batteries that should be replaced as needed It is strongly recommended to use Alkaline batteries which last longer without leaking To replace the remote control batteries 1 Locate the battery compartment on the back of the remote control Then remove the battery compartment cover as shown in Figure A above To do this press the tab attached to the cover When the tab is pressed pull the cover away from the remote control Remove and dispose of old batteries inserted in the compartment if applicable Insert two AA batteries in the compartment as shown in Figure B above Make sure the batteries are correctly inserted observing the proper polarity Figure B Figure C When new batteries have been inserted close the battery compartment cover as shown in the Figure C above To do this align the cover with the guide on the back of the remote control Then press the cover until it snaps into place It is recommended to refer to the Remote Control Overview section that begins on page 2 14 before operating the remote control 1 9 DD eee Basic Operation Front Panel Overview ets x ure E EE CRAT NOR EN TR COCOS EDU 2 2 Front Panel Display Indicators
83. all into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal OVERLOADING Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock RISK OF ELECTRIC SHOCK constitute a risk of shock DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel DAMAGE REQUIRING SERVICE Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water f the product does not operate normally by following the operating instructions Adjust only those contro
84. ames per second to create a more natural picture Refer to the Pure Cinema parameter description on page 3 30 for more information e Progressive scan component video output is only available for NTSC discs Note The RT 10 is not compatible with all high definition display devices which might produce video artifacts in the picture Video Out Video S Video RGB Controls video output format when the RT 10 is using the Euro or Peritel TV A V connector When Video is selected the RT 10 passes composite video signals to the associated display device When S Video is selected the RT 10 passes S video signals to the associated display device When RGB is selected the RT 10 passes RGB and composite video signals to the associated display device The composite video signals serve as sync Videol continues on page 3 28 3 27 Setup Menus Lexicon Video1 continued from page 3 27 INT ANNA Video NA E EE ez General TANYA Video NA Tote ETS INT ANNA Video1 MAARE EEE TV Screen Component Video Progressive Video Out Video S Video Out S2 Frame Search Off Screen Saver IIo off SETUP Mais TV Screen 16 9 Wide Component Video Progressive Video Out Video TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out S2 Frame Search T9 g Screen Saver Off bag Move 16 9 Wide S Video Out DER Frame Search ME Scr
85. anced Setup menu 1 Press the Stop button to activate stop mode In some cases the Stop button must be pressed twice in succession to activate stop mode 2 If the Setup menu is closed proceed to step 3 If the Setup menu is open press the remote control Setup button to close the Setup menu The Advanced Setup menu is not available when the Setup menu is open 3 When stop mode is activated and the Setup menu is closed press and hold the SETUP button for about 2 seconds The front panel Display Off button LED will begin blinking indicating that the Advanced Setup menu is open on the front panel display e When the Advanced Setup menu is open the DISP MODE parameter appears on the front panel display as shown on the previous page first column first row To navigate the Advanced Setup menu Button Command ENTER Selects the highlighted parameter or setting and v Scroll upward and downward through parameters When a parameter is selected pressing the and v arrows scrolls upward and downward through parameter settings SETUP Closes the Advanced Setup menu DISP MODE DISP ON DISP OFF Determines the front panel display mode for SACD CD and MP3 playback This parameter setting has no effect when other disc formats are loaded Select DISP ON to deactivate the front panel display and rear panel video output connectors during SACD CD and MP3 playback When SACD CD or MP3 playback is activated press
86. andling to ensure optimal performance Pay particular attention to the bulleted items that begin at the top of the next column and to other precautions that appear throughout this user guide In particular refer to the Disc Compatibility section 1 5 the Loading Discs section 4 2 and the Disc Maintenance section 5 16 DO e Hold discs at their center hole and outer edges as shown below Take care not to leave fingerprints dirt and scratches on the disc surfaces e Load single sided discs with the label side facing upward and double sided discs with the side intended for playback facing downward All loaded discs must align with the circular guide inside the disc drawer e Return discs to their cases when not in use Discs should be stored in an upright position out of direct sunlight and excessive heat humidity or cold DO NOT e Write on disc labels or surfaces with ballpoint pens pencils and other sharp tipped writing instruments Do not glue paper or attach stickers to discs as shown below Although not as fragile as the recorded side damage to the label side of the disc can still render the disc unplayable CAUTION The RT 10 is a single disc player Do not attempt to insert more than one disc in the disc drawer at one time This might cause damage to the RT 10 the discs or both Dirty or damaged discs such as those shown below might affect playback performance or damage the RT 10 Do not attempt to lo
87. are activated pressing the ENTER button executes the selected option Refer to Sections 3 and 4 for more information e eo PLAY A Navigate through the Setup and Advanced Setup menus as well as certain disc menus Instances in which the 4 and arrows perform different functions are noted throughout this user guide Refer to Sections 3 and 4 for more information Activates playback of the loaded disc at regular playback speed When pause or resume mode is activated pressing the Play or Pause button activates playback at the current playback time When stop mode is activated pressing the Play button activates playback from the beginning of the loaded disc When the disc drawer is open pressing the Play button closes the disc drawer and activates playback from the beginning of the loaded disc STOP 150 Activates resume mode which pauses playback of the loaded disc at the current playback time The Stop button can also be used to activate stop mode which stops playback of the loaded disc The table on page 4 12 indicates the playback modes available for each disc format When playback or pause mode is activated pressing the Stop button activates resume or stop mode In some cases the Stop button must be pressed twice in succession to activate stop mode When resume mode is activated pressing the Stop button activates stop mode RT 10 Basic Operation OPEN VIDEO CLOSE ON OFF DIMMER POWER 1 2
88. associated component is compatible with 96kHz PCM sources The RT 10 will not downsample 96kHz PCM signals before passing them to the associated component Audiol continues on page 3 14 Setup Menus Lexicon Audio1 continued from page 3 13 Audioi PARESI Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out A Digital Out MPEG PCM SACD Playback 2ch Area EBAY Move SETUP Mais Linear PCM Out continued The Linear PCM Out parameter is associated with the Setup Navigator 96kHz PCM Audio prompt 3 8 The Linear PCM Out parameter and 96kHz PCM Audio prompt settings have no effect when the RT 10 is not using the digital audio output connector Note The RT 10 always downsamples 192 and 176kHz signals to 96 and 88 2kHz before passing them to the associated component regardless of the Linear PCM Out parameter and Setup Navigator 96kHz PCM Audio prompt settings MPEG Out MPEG MPEG PCM Controls MPEG audio output format when an MPEG source is present and the RT 10 is using the digital audio output connector Audioi EVRVEEREREZE Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out Ko SACD Playback HOff E IT Ll Move SETUP 3413 Select MPEG if the associated component is compatible wit
89. ated pressing and releasing the button cycles through 1 16 1 8 1 4 and 1 2 regular playback speeds Pressing the Play button reactivates playback at the current playback time When the beginning of the disc is reached pressing the button performs no function Playback activates from the beginning of the loaded disc even if the button is pressed and held When playback 4 12 is activated pressing the button scans through the loaded disc in forward direction Subsequent presses cycle through available scanning speeds The button scans at three speeds The front panel button scans at one speed Pressing the Play button reactivates playback at the current playback time e When pause mode is activated pressing and releasing the button activates frame by frame playback in forward direction When the button is released pause mode reactivates at the current playback time When pause mode is activated pressing and holding the button for 1 second activates slow playback in forward direction at 1 16 regular playback speed When slow playback is activated pressing and releasing the button cycles through 1 16 1 8 1 4 and 1 2 regular playback speeds Pressing the Play button reactivates playback at the current playback time When the end of the disc is reached pressing the button performs no function Pause mode activates from the beginning of the loaded disc even if the button is pressed and
90. audio output connector Select Off if no subwoofer is present The RT 10 will not redirect LFE signals to other analog audio output connectors When speaker size parameters are set to Off the corresponding speaker distance parameters cannot be adjusted The L R parameter size setting cannot be adjusted This parameter has a fixed Large setting to provide full range audio output through the front left and right channels Because surround speakers must be the same size the LS and RS parameters cannot be set to different sizes When the setting of one parameter is adjusted the setting of the other parameter is automatically adjusted at the same time Setting Speaker Distances The Speaker Distance screen shown at the top of the previous page can be used to set speaker distances for the front center surround and subwoofer speakers Note Speaker distance settings have no effect when e An SACD is loaded e The RT 10 is using the 2 channel analog audio output connectors e The RT 10 is using the digital audio output connector To set speaker distances 1 When the Speaker Size screen opens press the remote control gt arrow to open the Speaker Distance screen When the Speaker Distance screen opens press the and v arrows to highlight the desired parameter When the desired parameter is highlighted press the 4 and arrows to cycle through available settings When the desired setting is selected press th
91. aukkoihin Mit n nesteit ei saa kaataa yksikk n l kytke audiotehovahvistimen l ht j suoraan mihink n yksik n liittimeen S hk iskun ja palovaaran v ltt miseksi yksikk ei saa olla sateessa tai kosteassa eik sit saa k ytt m r ss ymp rist ss l k yt yksikk jos se on pudonnut vaurioitunut kostunut tai jos sen suorituskyky on huomattavasti muuttunut mik vaatii huoltoa Yksik n saa avata vain laitteeseen perehtynyt huoltohenkil Kansien poisto altistaa sinut vaarallisille j nnitteille riitt v n korkea aiheuttamaan s hk iskuvaaran T m kolmio joka esiintyy komponentissasi kertoo sinulle ett t ss tuotedokumentoinnissa esiintyy t rkeit k ytt ja yll pito ohjeita T m kolmio joka esiintyy komponentissasi varoittaa sinua erist m tt m n vaarallisen j nnitteen esiintymisest yksik n sis ll T m j nnite saattaa olla Introduction Lexicon NORSK VIKTIG INFORMASJON OM SIKKERHET Ta vare p denne veiledningen for senere bruk F lg alle anvisningene og advarslene som er angitt p apparatet Apparatet skal alltid anvendes med korrekt spenning Produktbeskrivelsen inneholder spesifikasjoner for stromkrav Vaer oppmerksom p at det ved ulike driftsspenninger kan v re n dvendig bruke en annen ledning og eller stapseltype Apparatet skal ikke monteres i skap uten ventilasjon eller direkte over varmeproduserende utsty
92. axis b Press the remote control arrow to move the cursor to the first character space that appears on the right of the on screen display Then use the remote control number buttons to enter the numeric code for the desired language Refer to the table that begins on page A 14 to determine the appropriate numeric code When the desired language is selected press the remote control ENTER button to return to the Language tab Note the following e If the Auto Language parameter 3 39 is set to On the RT 10 automatically selects the default disc audio track regardless of the Audio Language parameter setting e The remote control AUDIO button can be used to select the desired audio track audio language and output format on the loaded DVD Refer to page 4 7 for more information Language continues on page 3 38 Setup Menus Lexicon Language continued from page 3 37 Audiol A2 Video1 V2 Language esurire OSD Language English Audio Language English Subtitle Language Ma Auto Language EiGerman DVD Language Kitalian Subtitle Display BSpanish Subtitle Off EDAP Move ENTER EEG SETUP ois Subtitle Language Refer to the table on pages A 14 and A 15 Determines the language in which subtitles appear If the selected subtitle language is available on the loaded DVD the RT 10 selects that language If the selected subtitle language is not included on the loaded DVD the RT 10 selects the default
93. ay menus that can be used to select disc settings control playback or view information about the disc The descriptions that begin below provide a general overview of disc menus available for each disc format Note This descriptions that begin below provide a general overview of disc menus available for each disc format These descriptions might differ for some discs within each format DVD V Include menus that can be used to activate playback of specific scenes and to select disc settings such as audio track audio language and output format subtitle language and camera angle In some cases certain remote control buttons can also be used to select these settings without navigating through the disc menu 4 7 DVD A Include top menus that can be used to activate playback of specific tracks and to select disc settings such as output format DVD RW R Include an Original List screen that provides information about the contents of the disc as recorded Some discs also include a Play List screen that provides information about the contents of the disc as programmed Navigating Disc Menus continues on page 4 4 4 3 Playback Controls Lexicon Navigating Disc Menus continued from page 4 3 SACD Audio CD amp CD RW R These disc formats do not include disc menus In some cases CD RW Rs that include MP3 tracks also include an MP3 Navigator below and 4 27 Video CD amp SVCD Include PBC Pl
94. ayback Control menus that can be used to activate playback of specific tracks In some cases the remote control number buttons can also be used to activate playback of specific tracks when the PBC menu is open MP3 Include an MP3 Navigator similar to the one shown below The MP3 Navigator can be used to edit the MP3 program list activate playback of specific folders and tracks and view the MP3 file structure Current 1 1 MP3 Navigator 2 1 10 Folder m Track 1 4 4 al 1 FOLDER 1 1 TRACK1 1 2 FOLDER 2 2 TRACK2 2 v 3 FOLDER 3 3 TRACK3 3 4 FOLDER 4 4 TRACK4 4 5 FOLDER 5 6 FOLDER 6 Play MENU ftis No Description 1 Indicates the numbers of the currently playing folder and track The MP3 Navigator does not provide this information unless playback is activated 2 Indicates the number of the selected folder and the number of folders included on the loaded disc The RT 10 recognizes a maximum of 250 folders per disc It ignores all folders that exceed this number 3 Indicates the number and name assigned to each folder on the loaded disc 4 Indicates the number of the selected track and the number of tracks included in the selected folder The RT 10 recognizes a maximum of 250 tracks per folder It ignores all folders that exceed this number 5 Indicates the number and name assigned to each track in the selected folder To navigate disc menus The table on pages 4 5 and 4 6 provides a gene
95. before a security level can be assigned When the current password is confirmed the Parental Lock Level Change screen shown above opens on the on screen display 1 When the Parental Lock Level Change screen opens press the remote control and arrows to increase and decrease the assigned security level The locks that appear on the on screen display lock when the associated security level is selected and unlock when the associated security level is deselected ENTER A AAA ee Audioi A2 Video1l V2 Language Parental Lock Level Change hhh hdhdh d Level 1 2 3 7 8 Of Return SETUP fila SETUP Mapa 2 When the desired security level has been selected press the remote control ENTER button to assign that security level and close the Parental Lock Level Change screen e f the off country code setting is selected make sure the desired country code is selected with the Country Code control Otherwise no security level will be assigned Note The remote control CONDITION MEMO button can be used to assign a specific security level for the loaded disc Refer to page 4 10 for more information 3 46 RT 10 Setup Menus Audiol A2 Video1 V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock I Bonus Group Level DNUS Country Code Group Playback Single ENTER REGA BI Uu SETUP iad Country Code Assigns a security level based on country code requiring the
96. bility the RT 10 is sure to deliver exceptional performance whether watching the latest blockbuster on DVD or listening to a remix of an old favorite on SACD Even the most demanding enthusiast will be impressed with its unbeatable combination of technology flexibility and simplicity 1 2 RT 10 Getting Started HIGHLIGHTS DVD V DVD A and DVD RW R compatibility SACD compatibility Audio CD CD RW R Video CD and SVCD compatibility 12 bit 108MHz D A video conversion Progressive scan component video output on BNC RCA or Mini D Ribbon connectors True 3 2 pull down for the finest film based DVD reproduction Video Adjust for exact detailed adjustment of video settings Six Video Adjust banks including three preset banks and three memory banks for user defined settings 24 bit 192kHz D A audio conversion Digital audio output on S PDIF coaxial S PDIF optical or AES EBU connectors Still Frame Frame by Frame Slow Random Repeat and Program playback modes Shortcuts for up to 5 frequently adjusted controls Stored disc settings for up to 15 discs MP3 and MPEG compatibility Composite and S video output Video and audio output on Euro or Peritel TV A V connector Trigger input connector IR input connector Intuitive customizable user interface Setup Navigator Optional 19 inch rack mount kit PRODUCT REGISTRATION Please register the RT 10 within 15 days of purchase To do so register on line at www le
97. btitles when playback mode is activated Select Off to prevent subtitles from displaying when playback mode is activated Select Assist Subtitle to display more extensive subtitles when playback mode is activated Note the following e In most cases subtitles do not appear on the on screen display when the Subtitle Display parameter is set to Off regardless of the Subtitle Language 3 38 and Auto Language 3 39 parameter settings 3 40 RT 10 Setup Menus e f the loaded disc does not include subtitles subtitles do not appear on the on screen display regardless of Language tab parameter settings Subtitle Off With Audio Selected Subtitle Determines the language in which subtitles appear if the loaded disc displays subtitles when the Subtitle Display parameter previous page is set to Off In most cases subtitles do not appear on the on screen display when the Subtitle Display parameter is set to Off regardless of the Subtitle Language 3 38 and Auto Language 3 39 parameter settings Select With Audio to display subtitles in the language selected with the Audio Language parameter Select Selected Subtitle to display subtitles in the language selected with the Subtitle Language parameter If the loaded disc does not include the selected subtitle language the RT 10 selects the default disc subtitle language GENERAL Includes parameters that can be used to configure general RT 10 settings such as Setup menu dis
98. c Language Code Abb Language Code Abb Language Code Abb Laothian 1215 lo Quechua 1721 qu Tamil 2001 ta Lithuanian 1220 It Rhaeto Romance 1813 rm Telugu 2005 te Latvian 1222 lv Kirundi 1814 rn Tajik 2007 tg Malagasy 1307 mg Romanian 1815 ro Thai 2008 th Maori 1309 mi Kinyarwanda 1823 rw Tigrinya 2009 ti Macedonian 1311 mk Sanskrit 1901 sa Turkmen 2011 tk Malayalam 1312 ml Sindhi 1904 sd Tagalog 2012 tl Mongolian 1314 mn Sangho 1907 sg Setswana 2014 tn Moldavian 1315 mo Serbo Croatian 1908 sh Tonga 2015 to Marathi 1318 mr Singhalese 1909 si Turkish 2018 tr Malay 1319 ms Slovak 1911 sk Tsonga 2019 ts Maltese 1320 mt Slovenian 1912 sl Tatar 2020 tt Burmese 1325 my Samoan 1913 sm Twi 2023 tw Nauru 1401 na Shona 1914 sn Ukrainian 2111 uk Nepali 1405 ne Somali 1915 so Urdu 2118 ur Norwegian 1415 no Albanian 1917 sq Uzbek 2126 uz Occitan 1503 oc Serbian 1918 sr Vietnamese 2209 vi Oromo 1513 om Siswati 1919 ss Volap k 2215 vo Oriya 1518 or Sesotho 1920 st Wolof 2315 wo Panjabi 1601 pa Sundanese 1921 su Xhosa 2408 xh Polish 1612 pl Swedish 1922 sv Yoruba 2515 yo Pashto Pushto 1619 ps Swahili 1923 sw Zulu 2621 Zu Portuguese 1620 pt Appendix Lexicon TABLE OF COUNTRY CODES Numeric Numeric Numeric Country Code Abb Country Code Abb Country Code Abb Argentina 0118 ar Hong Kong 0811 hk Philippines 1608 ph Australia 0121 au India 0914 in Portugal 1620 pt Austria 0120 at Indonesia 0904 id Russian Federation 1821 ru Belgium 0205 be Italy 0920 it S
99. cannot be created for the following Setup menu parameters Linear PCM Out SACD Playback TV Screen Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off Setup Navigator Parental Lock Bonus Group and Group Playback To create and delete Setup menu shortcuts 1 When the Setup menu is open highlight the desired parameter for which to create or delete a shortcut e Shortcuts can be created for up to five Setup menu parameters excluding those listed in the Note above e Shortcuts can be deleted for Setup menu parameters for which a shortcut has been FM created The icon shown at the right appears to the left of the parameter label when a shortcut has been created for that parameter When the desired parameter is highlighted press the remote control MEMO button e If a shortcut can be created for the highlighted parameter the icon shown above will appear to the left of the parameter label e If a shortcut has already been created for the highlighted parameter the icon will shown above disappear from the left of the parameter label Function Memory Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 e Ifashortcut cannot be created for the highlighted parameter the icon shown at the right will appear on the on screen display Shortcuts cannot be created for the Setup menu parameters listed in the Note in the previous column amp To use a Setup menu
100. cases activating pause mode creates a still frame image on the associated display device screen Refer to the still frame playback description below for more information Audio automatically mutes when pause mode is activated To activate pause mode When playback is activated press the Pause button To deactivate pause mode Press the Play or Pause button to reactivate playback at the current playback time Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time STILL FRAME PLAYBACK o The front panel and remote control Pause button can be used to activate still frame playback which pauses playback at the current playback time and creates a still frame image on the associated display device screen The Still Picture parameter 3 35 controls the appearance of still frame images When set to Field the RT 10 produces tight stable and generally shake free still frame images When set to Frame the RT 10 produces sharper but shakier still frame images When set to Auto the RT 10 automatically selects the best viewing method for still frame images Still frame images displayed on CRT display devices for long periods of time can burn in or create ghost images on the display device screen When the RT 10 is connected to a CRT display device it
101. ck When playback is activated press the CONDITION MEMO button The Condition Memory bar shown below will open at the top of the on screen display to indicate that preferred disc settings have been stored for the loaded disc Once stored these settings will be automatically recalled whenever the disc is loaded Condition Memory RI 10 Playback Controls To delete preferred disc settings 1 Make sure a DVD V for which preferred disc settings have been stored is loaded When the disc is loaded press the Play button to activate playback When playback is activated press the CONDITION MEMO button to open the Condition Memory bar shown on the previous page When the Condition Memory bar opens press the remote control CLEAR button to delete preferred disc settings PLAYBACK MODES The RT 10 offers a range of playback modes that can be used to control playback of the loaded disc The table on the next page indicates the playback modes available for each disc format PLAYBACK PLAY The front panel or remote control Play button can be used to activate playback of the loaded disc at regular playback speed In some cases the remote control number buttons can also be used to activate playback of a specific title chapter group or track The Play button might not activate playback when the disc menu is open on the on screen display Some discs automatically activate regular playback when switching titles chap
102. ck Level Parameter 3 30 3 31 Noise Reduction BNR Parameter 3 30 3 31 Setup Parameter 3 30 3 31 BNR Black Noise Reduction Parameter 3 30 3 31 Bonus Group Parameter 3 41 3 48 A 13 screens Bookmarks 4 13 C C Parameter 3 18 3 22 Camera Angle s see Angle s i ii iii 1 3 1 8 2 3 2 9 4 2 5 5 5 16 Digital Direct Parameter 3 16 3 24 Documentation Convention iii Center Speaker Prompt 3 3 3 6 Index continues on page l 2 1 1 C continued Channel Separation A 2 Channels Indicator 2 8 Character Display 2 6 Indicator 2 6 Chroma Delay Parameter 3 31 3 32 Level Parameter 3 31 3 32 Chrominance Noise Reduction CNR Parameter 3 30 3 31 CLEAR Button 2 15 4 5 4 17 4 19 4 21 4 22 CNR Chrominance Noise Reduction Parameter 3 30 3 31 Command Matrix Disc Menu 4 5 to 4 6 Remote Contorol 2 14 to 2 18 Command Modes Assigning Remote Control 3 53 DVD 1 3 53 DVD 2 3 53 Component Video Parameter 3 24 3 27 Output Connectors 2 9 to 2 10 A 2 Composite Video Output Connectors 2 10 A 2 Indicator 2 7 CONDITION MEMO Button 2 18 4 7 4 10 4 11 Condition Memory Mode 2 18 4 7 4 10 to 4 11 stin ideo TJ F7 1 Tf1 125 1 4 emote Contr4 DVD47 2 13 screensti 2 161 125 6 RT 7900 able of 2 161 2 6 TJ F4 1 TfO 10132 59601 3212 700 0002 TcDnued Tj F7 1 TfO 11512249 68 12f 32 7 F continued Front Panel Display 2 3 2 6 ill to 2 8 indicators Illustration 2 2 Ove
103. ck is not available for Video CDs and SVCDs that include PBC menus e A B repeat playback is automatically deactivated when random or repeat playback is activated the remote control CLEAR STOP PREV NEXT RANDOM or REPEAT button is pressed To activate A B repeat playback 1 When playback is activated press the A B button at the desired start time point A The Memory bar shown below left will open at the top of the on screen display to indicate that a start time has been selected e To repeat the user defined playback loop once proceed to step 2 e To repeat the user defined playback loop continuously proceed to step 3 Search Time Press the Play button at the desired end time point B The Repeat Memory bar shown below center will open at the top of the on screen display to indicate that an end time point B has been selected When the Repeat Memory bar opens A B repeat playback is automatically activated When the user defined end time point B is reached regular playback is automatically activated at that time Proceed to step 4 Press the A B button again at the desired end time point B The Repeat A B bar shown below right will open at the top of the on screen display to indicate that an end time point B has been selected When the Repeat A B bar opens A B repeat playback is automatically activated Repeat playback of the user defined playback loop continues until A B repeat playback is d
104. component to alert you to the presence of Calls attention to a procedure practice condition or the like uninsulated dangerous voltage inside the enclosure voltage that if not correctly performed or adhered to could result in that may be sufficient to constitute a risk of shock injury or death Appears on your component to alert you to important CAUTION Calls attention to a procedure practice condition or the like operating and maintenance instructions in this accompanying that if not correctly performed or adhered to could result in literature damage or destruction to part or all of the product Note Calls attention to information that is essential to highlight This document uses the term DVD to refer to DVD V DVD A DVD RW and DVD R formats Otherwise this document uses the term DVD V to refer to DVD Video format DVD A to refer to DVD Audio format and DVD RW R to refer to DVD RW and DVD R formats This document uses the term CD to refer to Audio CD CD RW CD R and Video CD formats Otherwise this document uses the term Audio CD to refer to Audio CD format CD RW R to refer to CD RW and CD R formats and Video CD to refer to Video CD format This document uses the term MP3 to refer to CD RW R formats that include MP3 tracks lexicon Manufactured under license from Dolby Laboratories Dolby Pro Logic Surround EX and the double D symbol are trademarks of Dolby Laboratories H A Harman International
105. covered 1 Damage resulting from Accident misuse abuse or neglect Failure to follow instructions contained in the user guide Repair or attempted repair unauthorized by Lexicon Inc Failure to perform recommended periodic maintenance Causes other than product defects including lack of skill competence or experience on the part of the owner exicon H A Harman International Company Damage occurring during any shipment of this product Claims for shipping damages must be made with the carrier Damage to a unit that has been altered or on which the serial number has been defaced modified or removed What Expenses will Lexicon Inc Assume Lexicon Inc will pay all labor and material expenses for covered items Payment of shipping charges is discussed in the next section of the warranty How is Service Obtained When this product needs service write telephone or fax Lexicon Inc to request information about where the unit should be taken or sent When making a written request please include your name complete address and daytime telephone number the product model and serial numbers and a description of the problem Do not return the unit to Lexicon Inc without prior authorization When Shipping a Product for Service 1 Pay any initial shipping charges which are the responsibility of the owner If necessary repairs are covered by this warranty Lexicon Inc will pay return shipping charges t
106. curs contact an authorized Lexicon dealer for assistance Do not attempt to clean the lens with a commercially available DVD or CD lens cleaner as some of these products might damage the RT 10 lens DVD V REGIONS The map shown below indicates DVD V region codes for all areas of the world All DVD Vs are marked with a region code which is often located on the disc packaging The RT 10 rear panel is also marked with a region code The RT 10 is compatible with discs marked with this same region code or with the ALL region code The RT 10 is not compatible with discs marked with other region codes 1 4 RT 10 Getting Started DISC COMPATIBILITY The RT 10 is compatible with disc formats that meet the requirements listed in the tables that begin below Refer to the Disc Care amp Handling section 1 8 the Loading Discs section 4 2 and the Disc Maintenance section 5 16 for more information Note The RT 10 is not compatible with DVD ROM DVD RAM CD ROM except those that include compatible MP3 tracks and Photo CD formats Format Logo Disc Compatibility Requirements Additional Information DVD V VIDEO 22 DVD A DVD The RT 10 supports 5 inch 12cm or 3 inch 8cm discs Dolby Digital DTS MPEG or PCM Linear digital audio MPEG 2 video Single or double sided discs Single or dual layered discs The RT 10 supports 5 inch 12cm or 3 inch 8cm discs Lin
107. cycle through all audio tracks available on the loaded disc The remote control number buttons can also be used to enter the number of the desired audio track if known Audio Tracks continues on page 4 8 4 7 Playback Controls Lexicon Audio Tracks continued from page 4 7 3 Note The Audio bar automatically doses a few seconds after the last command is received If this occurs playback will automatically activate using the selected audio track When the desired audio track is selected press the Play button or the remote control ENTER button to activate playback using the selected audio track SUBTITLE LANGUAGES SUBTITLE Pressing the remote control SUBTITLE button opens the Subtitle bar shown at the top of the next column which can be used to select the desired subtitle language Subtitle language selection is available for DVD Vs recorded with subtitles Subtitle language selection is not available for other disc formats or for discs that are not recorded with subtitles In addition subtitle language selection is not available unless playback is activated Subtitle language selection has no effect on the Subtitle Language parameter 3 38 setting Subtitle 1 English To select a subtitle language b 2 When playback is activated press the SUBTITLE button to open the Subtitle bar shown above e The Subtitle bar indicates the language in which the selected subtitles were record
108. dby mode even when the RT 10 is not using the trigger input connector 2 10 RT 10 Basic Operation Note The trigger input switch setting does not take effect until the RT 10 is power cycled with the front panel On Off button 10 Trigger Input Connector Allows the RT 10 to be controlled with an associated component that includes a 12V DC trigger output connector such as the MC 12 or MC 8 Digital Controllers All versions include one trigger input connector labeled TRIGGER INPUT which is available on a removable terminal block To configure the RT 10 for trigger control 1 Connect the trigger input connector on the RT 10 to a 12V DC trigger output connector on an associated component component 2 Setthe RT 10 trigger input switch previous page to ON 3 Power cycle the RT 10 with the front panel On Off button 2 2 The RT 10 will respond when standby mode is activated or deactivated for the connected component The RT 10 will not respond to the remote control POWER button 11 IR IN Connector Provides input of infrared data from industry standard infrared distribution equipment All models include one female 3 5mm Tip Ring Sleeve connector labeled IR IN REAR PANEL CONNECTIONS The RT 10 is manufactured for sale in several different countries Each version features a rear panel that includes connectors and safety instructions appropriate to that particular region Note The rear panel sh
109. de When resume mode is activated pressing the Stop button activates stop mode 2 4 RT 10 Basic Operation 9 Reverse Skip Scan Button 144 44 Skips and scans in reverse direction through the loaded disc When resume or stop mode is activated pressing the 1 button activates playback from the beginning of the loaded disc When playback or pause mode is activated Pressing and releasing the 1 button skips to the beginning of the current chapter or track Subsequent presses skip to the beginning of the previous chapter or track When the RT 10 loads the selection playback or pause mode reactivates from the beginning of the selected chapter or track Pressing and holding the 4 button scans through the loaded disc in reverse direction When the button is released playback or pause mode reactivates at the current playback time The front panel I button scans at one speed The remote control button scans at three speeds When the beginning of the disc is reached pressing the M4 button performs no function Playback activates from the beginning of the loaded disc even if the 1 button is pressed and held 10 Forward Skip Scan Button Skips or scans in forward direction through the loaded disc When resume or stop mode is activated pressing the i button activates playback from the beginning of the loaded disc When playback or pause mode is activated Pressing and relea
110. de in sie hineingesteckt werden Versch tten Sie niemals Fl ssigkeiten gleich welcher Art auf das Ger t SchlieBen Sie niemals Stromausg nge des Audioverst rkers direkt an das Ger t an Zur Vermeidung von elektrischen Schl gen oder Brandgefahr darf das Ger t weder Regen noch Feuchtigkeit ausgesetzt oder an Orten betrieben werden wo es mit Wasser in Ber hrung kommen kann Versuchen Sie nie das Ger t zu betreiben wenn es fallen gelassen besch digt oder Fl ssigkeiten ausgesetzt wurde oder wenn ein deutlicher Leistungsunterschied zu verzeichnen ist der darauf hinweist dass es gewartet werden muss Dieser Apparat sollte nur von qualifizierten Fachleuten ge ffnet werden Das Abnehmen von Abdeckungen setzt Sie gef hrlichen Spannungen aus kann so hoch sein dass das Risiko eines Stromschlags besteht Dieses Dreieck welches auf Ihrem Bauteil angebracht ist macht Sie auf wichtige Betriebs und Wartungshinweise in diesen Hinweisen aufmerksam Dieses Dreieck welches auf Ihrem Bauteil angebracht ist warnt Sie vor dem Vorhandensein nicht isolierter gef hrlicher Spannung im Ger t Diese Spannung vi RT 10 Introduction ESPANOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES Guarde estas instrucciones para futuras referencias Siga todas las instrucciones y tenga en cuenta las advertencias que aparecen en la unidad y en las instrucciones de funcionamiento Utilice siempre la tensi n de l nea correcta
111. de to the remote control Press and hold the remote control STOP and number 2 buttons for about 5 seconds To assign the DVD 1 command mode to the remote control Press and hold the remote control STOP and number 1 buttons for about 5 seconds To confirm the command mode assigned to the remote control Press and hold the remote control STOP and PAUSE buttons for about 2 seconds The command mode assigned to the remote control will appear on the front panel display To assign a command mode to the RT 10 Follow the navigation instructions on the previous page to set the REMOT CODE parameter to the desired command mode 3 53 EN 5 Playback Controls dcylecia dise MONUMENTI 4 2 Loading AA 4 2 Navigating Disc M rnus s brace EAS 4 3 Selecting Disc Settings ud sedesu Vokes ee ORs I ees ing 4 7 Audio Tracks Subtitle Languages Camera Angles Storing Disc Settings Playback Modes 1 caa ihe 4 3 9 a IA paa y aba 4 11 Playback Last Memory Playback Stop Mode Resume Mode Pause Mode Still Frame Playback Frame by Frame Playback Slow Playback Random Playback Repeat Playback A B Repeat Playback Program Mode Search Mode Display Mode Playback Controls Lexicon PLAYBACK ICONS e The icon shown at the right appears on the on screen display when the RT 10 does not allow the selected command e The icon shown at the right appears on the on screen display when the loaded disc does not al
112. disc encoded with a user defined security level or country code is loaded A user defined password must be assigned before the Level and Country Code controls can be adjusted User defined passwords are automatically deleted when factory default settings are restored To assign a password When the Password parental control is selected for the first time the Register Code Number screen shown above opens on the on screen display This screen can be used to assign a user defined password 1 When the Register Code Number screen opens use the remote control number buttons to enter the desired password All passwords must consist of four numbers between 0 and 9 e When a number is entered the cursor automatically advances to the next character space Press the 4 arrow to return to the previous character space or the arrow to advance to the next character space Audiol A2 Videol V2 Language Parental Lock Register Code Number a a akala ENTER Audiol A2 Video1 V2 Language Parental Lock Register Code Number 4 2 3 4 Return Exit SETUP 4 2 When a four number password has been entered an ENTER button appears on the on screen display to indicate that pressing the remote control ENTER button will assign the entered password General continues on page 3 44 3 43 Setup Menus Lexicon General continued from page 3 43 Audiol A2 Videol V2 Language Parental Lock Confirm Code Number a E
113. e remote control is in line of sight with the front panel display remote control sensor Eliminate obstructions between the remote control and the remote control sensor The remote control might become unreliable if strong sunlight or fluorescent light is shining on the remote control sensor Make sure the remote control is positioned within its operating range 2 14 The remote control should be positioned at a 30 degree angle no more than 17 feet 5m from the RT 10 If the RT 10 is placed inside a glass cabinet smoked glass might reduce the remote control range Make sure the same command mode 3 53 is assigned to the remote control and the RT 10 The remote control can only be used to operate an RT 10 to which the same command mode is assigned The remote control cannot be used to operate an RT 10 to which a different command mode is assigned except to configure Advanced Setup menu parameter settings If playback is activated press the Stop button to activate stop mode then press the Play button to activate playback from the beginning of the loaded disc In some cases this will restore functionality Power cycle the RT 10 with the front panel On Off button In some cases this will restore functionality 5 2 RT 10 Troubleshooting amp Maintenance The remote control number buttons cannot be used to enter values 10 and above 1 In some cases the remote control 10 button must be used to enter values 10 and ab
114. e 4 arrow to highlight the Distance option at the top of the on screen display Then pressing the 4 arrow to open the Speaker Size screen or the remote control ENTER button to return to the Setup menu Note the following To determine the appropriate setting for each speaker measure the distance between the listening position and the front baffle of the speaker Then set the associated speaker distance parameter to the closest available value 3 20 RT 10 Setup Menus Audio2 WEBS Audio Out Speaker Setting Gain Setting CD Digital Direct IBI JUN 2 Channel Fix B Variable SETUP Language General Exit ENTER EN Aucio MEN V2 Language General Eg Aucio MEN V2 Language General RS LS SW B Test Tone 0 0dB 0 0dB 0 0dB 0 0dB 0 0dB 0 0dB ENTER iS Se dli SETUP odie e The L R distance parameter setting affects all other speaker distance parameter settings The C and SW parameters must be set within 6 5 feet 2m of the L R parameter and the LS and RS parameters must be set within 20 feet 6m of the L R parameter e When the L R parameter setting is increased other parameter settings automatically increase in 0 5 foot increments within their respective ranges Likewise when the L R parameter setting is decreased other parameter settings automatically decrease in 0 5 foot increments within their respective ranges e t is recommended to select the closest available
115. e necessitano anche di un diverso cavo con spine differenti Non installare l unit in un rack poco ventilato o direttamente sopra apparecchiature che producono calore come amplificatori di potenza Controllare la massima temperatura ambientale di esercizio sulle specifiche tecniche del prodotto Fori ed aperture nei pannelli sono necessari per garantire un corretta ventilazione e prevenire surriscaldamenti Queste aperture non devono essere coperte o ostruite Non inserire oggetti di alcun tipo nei fori di ventilazione Evitare il contatto con liquidi di qualsiasi genere Evitare di collegare le uscite di un amplificatore di potenza direttamente a qualsiasi connettore dell unit Per evitare il rischio di scosse elettriche non esporre il prodotto a pioggia o umidit Evitare l uso dove possa essere esposto all acqua Non tentare di utilizzare il prodotto se caduto se stato a contatto con liquidi o mostra chiari segni di danneggiamento o cambio di prestazioni che indicano la necessit di assistenza tecnica Ogni intervento sull unit va eseguito esclusivamente da personale qualificato La rimozione della copertura comporta l esposizione al pericolo di folgorazione pericolose non isolate all interno della copertura tali tensioni rappresentano un ll presente triangolo impresso sul componente avverte la presenza di tensioni pericolo di folgorazione documentazione allegata di importanti istruzioni relative al funz
116. eactivated The instructions end here To redefine the end time point B press the A B button again at the desired end time The Repeat A B bar shown below right will open at the top of the on screen display to indicate that a new end time point B has been selected When the Repeat A B bar opens A B repeat playback is automatically reactivated beginning with the start time point A selected in step 1 and continuing until the end time selected in this step is reached A B Repeat Playback continues on page 4 22 14 52 Repeat Search 14 52 Repeat Memory Time A B 4 21 Playback Controls Lexicon A B Repeat Playback continued from page 4 21 To deactivate A B repeat playback e Press the A B button or the remote control CLEAR button to activate playback at the current playback time In some cases the A B button must be pressed twice in succession to deactivate A B repeat playback The Repeat Off bar shown on page 4 20 will open at the top of the on screen display to indicate that A B repeat playback has been deactivated e Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time PROGRAM MODE PROGRAM e The remote control PROGRAM button can be used to activate program mode which creates a program list for the loaded disc When a p
117. ear or PCM Packed digital audio discs might also include Dolby Digital DTS or MPEG digital audio and MPEG 2 video MPEG 2 video Single or double sided discs Single or dual layered discs e Discs are divided into titles which are further divided into chapters e Discs are divided into groups which are further divided into tracks Disc Compatibility continues on page 1 6 Getting Started Lexicon Disc Compatibility continued from page 1 5 Format Logo Disc Compatibility Requirements Additional Information DVD RW R DVD The RT 10 supports The RT 10 might not allow playback of DVD RW Rs Rw e 5 inch 12cm or 3 inch 8cm discs recorded with a personal computer if incorrect DVD software application settings were used during ECT Discs recorden im DVDSV format the recording process even if the disc was i i f f The RT 10 does not support recorded in a compatible ormat Refer to the software application documentation for more e Unfinalized discs information e Discs that include MP3 tracks e Copy once protected discs SACD ca The RT 10 supports Discs are divided into tracks sure bro co e 5 inch 12cm or 3 inch 8cm discs e Digital audio DSD e Single dual or hybrid layered discs Audio CD paper The RT 10 supports Discs are divided into tracks DIGITAL AUDIO e 5 inch 12cm or 3 inch 8cm discs e PCM Linear digital audio CD RW R Wel The RT 10 supports The RT 10 migh
118. ed For instance the Subtitle bar shown above indicates that the selected subtitles were recorded in English e If the Subtitle bar does not open at the top of the on screen display subtitle language selection might not be available for the loaded disc When the Subtitle bar opens press the SUBTITLE button again to cycle through all subtitle languages available on the loaded disc The remote control number buttons can also be used to enter the number of the desired subtitle language if known e Select Subtitle Off to prevent subtitles from appearing on the on screen display during playback Note The Subtitle bar automatically doses a few seconds after the last command is received If this occurs playback will automatically activate using the selected subtitle language 3 When the desired subtitle language is selected press the Play button or the remote control ENTER button to activate playback using the selected subtitle language 4 8 RI 10 Playback Controls CAMERA ANGLES ANGLE e Pressing the remote control ANGLE button opens the Angle bar shown below which can be used to select the desired camera angle e Camera angle selection is available for DVD V scenes recorded from multiple camera angles Camera angle selection is not available for other disc formats or for DVD V scenes recorded from one camera angle In addition camera angle selection is not available unless playback is activated e
119. ed alternating current line plug a plug having one blade wider than the other it will fit into the outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should Still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug If this product is equipped with a three wire grounding type plug a plug having a third grounding pin it will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug POWER CORD PROTECTION Power supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product LIGHTNING For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can f
120. ed values to the right of the selected field one field to the left For instance the value to the immediate right of the selected field moves to the selected field A blank field is inserted at the end of the program list amp v Scroll upward and downward through Program tab items amp Scroll to the previous and the next field The cursor will not scroll to blank fields Pause Inserts a pause in the selected field Pauses must be inserted between two values In other words pauses cannot be inserted in the first and last fields 4 22 RI 10 Playback Controls Program List Requirements Disc Format s DVD V amp DVD RW R Program Lists One program title list per disc One program chapter list per title Requirements Program lists cannot include more than 24 entries including titles chapters and pauses include values 100 and above include values that are not included on the loaded disc include chapters from different titles Storage Program lists can be stored for up to 24 discs The Program Memory parameter 4 24 determines program list storage Program lists are automatically deleted when factory default settings are restored DVD A One program group list per disc One program track list per group Program lists cannot include more than 24 entries including groups tracks and pauses include values 100 and above include values that
121. ed with a Setup menu parameter Save or Delete Changes Start Again SETUP MENU The Setup menu can be used to configure audio video language and other general RT 10 settings Available in expert and basic display modes the Setup menu can be configured for the desired level of control The Setup Menu Mode parameter 3 42 can be used to select the mode in which the Setup menu is displayed Setup Menu Mode Determines the mode in which the Setup menu is displayed Select Expert to display the Setup menu in expert mode which includes all available parameters The Setup menu is shown in expert mode at the top of the next page Select Basic to display the Setup menu in basic mode which only includes parameters that are required to configure the most common RT 10 settings When displayed in basic mode the Setup menu also includes a tutorial to describe the highlighted menu item The Setup menu is shown in basic mode at the bottom of the next page Expert Basic To open the Setup Menu Press the remote control SETUP button To navigate the Setup menu Button Command ENTER Selects the highlighted parameter or setting 4 and Scroll left and right through Setup menu tabs When a parameter is highlighted pressing the gt arrow selects that parameter a and y Scroll upward and downward through Setup menu tabs parameters and settings RETURN When a Setup menu tab is highlighted pressing the RETURN button cl
122. een Video1 tab 3 25 Analog Jacks e 2 Channel e 5 1 Channel Not Connected Audio Out Audio2 tab 3 16 Center Speaker e Present Not Present Speaker Setting Audio2 tab 3 18 Surround Speakers Present Not Present Speaker Setting Audio2 tab 3 18 Sub woofer Present Not Present Speaker Setting Audio2 tab 3 18 Digital Jack Dolby Digital Dolby D DTS Dolby Digital Out 3 12 Dolby Digital MPEG DTS Out 3 13 DTS PCM MPEG Out 3 14 Dolby Digital e Not Connected Audio1 tab MPEG 96kHz PCM Audio No Don t Know Linear PCM Out e Yes 3 Audio1 tab 3 13 Exit Setup Navigator Save Changes Delete Changes Start Again None 3 3 Setup Menus Lexicon Setup Navigator continued from page 3 3 Audiol A2 Video1 V2 Language DOS Move Setup Navigator Setup Navigator Auto Start Off Setup using the Setup Navigator ENTER Sl Clem SETUP iia To navigate the Setup Navigator Button ENTER Command Selects the highlighted setting When a setting is selected the Setup Navigator automatically proceeds to the next prompt Returns to the previous Setup Navigator prompt When the first Setup Navigator prompt is open pressing the arrow performs no function and v Scroll upward and downward through parameter settings RETURN Closes the Setup Navigator without saving the selected settings
123. een Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off Setup Navigator Parental Lock Bonus Group and Group Playback Make sure the Function Memory tab 3 50 is not full Setup menu shortcuts can be created for up to five Setup menu parameters excluding those listed in the previous bullet If five shortcuts have been created one shortcut must be deleted before another can be created Setup Menu Issues continues on page 5 12 5 11 Troubleshooting amp Maintenance Lexicon Setup Menu Issues continued from page 5 11 The Advanced Setup menu will not open 1 Press the Stop button to activate stop mode The Advanced Setup menu cannot be opened unless stop mode is activated Press the remote control SETUP button to close the Setup menu The Advanced Setup menu cannot be opened when the Setup menu is open The DISP MODE parameter is set to ON but the front panel display is still activated 1 Make sure playback of an SACD CD or MP3 is activated When the DISP MODE parameter is set to ON the RT 10 deactivates the front panel display during SACD CD or MP3 playback The front panel display is not deactivated when other disc formats are loaded or when stop resume or pause mode is activated The DISP MODE parameter might not function as described on page 3 52 with some SACDs CDs or MP3s If this occurs set the DISP MODE parameter to DISP OFF so the front pan
124. een Saver Off EBAY Move SETUP 43 SETUP ide EBAL Move Frame Search On Off Enables and disables the time and time amp frame search modes S Video Out 1 2 Determines the trigger control signal present when the RT 10 is using the S video output connector providing control of anamorphic display switching Select the S1 setting to enable automatic switching between 16 9 and 4 3 video output formats Select the S2 setting to enable automatic switching between 16 9 4 3 standard and 4 3 letter box video output formats The S Video Out parameter controls anamorphic display switching when all of the following conditions are met e The RT 10 has an S video output connection to the associated display device e The associated display device is compatible with the selected anamorphic trigger control signal e The loaded disc supports the selected anamorphic trigger control signal It is recommended to toggle between the S1 and S2 settings if the picture appears stretched or otherwise distorted on the display device screen 4 28 When On is selected these search modes are enabled for compatible disc formats When Off is selected these search modes are disabled for all disc formats Screen Saver On Off Activates and deactivates the Lexicon screen saver When On is selected the Lexicon screen saver appears on the on screen display when a still frame image has appeared on the display device screen for more than 5 minute
125. el display and rear panel video output connectors will function as normal PLAYBACK CONTROL ISSUES The disc menu 4 3 will not open 1 Attempt to open the disc menu with the remote control MENU button and TOP MENU buttons In some cases pressing these buttons opens the same disc menu In some cases one specific button must be pressed to open the disc menu For instance the TOP MENU button must be pressed to open DVD A top menus Make sure a disc format that includes a disc menu is loaded SACDs CD RW Rs except those that include MP3 tracks and Audio CDs do not include disc menus Preferred disc settings 4 10 cannot be stored 1 Make sure a DVD V is loaded Preferred disc settings cannot be stored for other disc formats Make sure the loaded DVD V allows selection of on screen display disc menu language audio track audio language or output format camera angle subtitle language Video Adjust or parental security level settings Preferred disc settings cannot be stored for other disc formats or for DVD Vs that do not allow at least one of these selections Preferred disc settings cannot be stored for selections the loaded DVD V does not allow For instance if the loaded DVD V does not allow selection of an on screen display disc menu language setting a preferred on screen display disc menu language setting cannot be stored However preferred disc settings can still be stored for other selections the loaded D
126. elected These Speaker Setting parameters are associated with the Setup Navigator Center Speaker 3 6 Surround Speakers 3 6 and Sub woofer 3 7 prompts f The L R size parameter setting cannot be adjusted This parameter has a fixed Large setting to provide full range audio output through the front left and right channels 3 These settings are recommended when the RT 10 is connected to an MC 12 or MC 8 Digital Controller When no setting is indicated any setting 3 18 RT 10 Setup Menus c ENTER KE m m c Eg udio2 Video1 V2 Language General Eg udio2 Video1 V2 Language General Eg udio2 Video1 V2 Language General Audio Out 2 Channel Speaker Setting Speaker Setting Ea Start Gain Setting Fix L R Large L R 10 0ft CD Digital Direct Off E Large 10 0ft LS Large LS 10 0ft RS Large RS 10 0ft SW On SW 10 0ft DALE ENE SETUP avg B Distance CACO SETUP Bands r Size Ea SETUP 33 Setting Speaker Sizes 2 When the desired parameter is highlighted press the 4 and The Speaker Size screen shown above can be used to set speaker sizes and crossover points for the front center surround and 3 subwoofer speakers Refer to the manufacturer documentation to determine the low frequency response of each speaker Note Speaker size settings have no effect when e A DVD A is loaded e The RT 10 is using the 2 channel analog audio output connectors e The
127. ement les sorties audio des amplificateurs de puissance aux connecteurs de l appareil Afin d viter tout risque d lectrocution ou d incendie n exposez pas l appareil la pluie ou l humidit ne l utilisez pas dans des endroits expos s aux projections de liquides N essayez pas d utiliser l appareil si celui ci est tomb a t endommag expos des projections de liquides ou si vous constatez des dysfonctionnements n cessitant l intervention d un technicien sp cialis Cet appareil ne doit tre ouvert que par un personnel de service qualifi En enlevant les couvercles vous vous exposez des tensions lectriques dangereuses Le symbole de clair fl ch dans un triangle quilat ral sert alerter l utilisateur sur la pr sence l int rieur de l appareil de tensions non isol es susceptibles de constituer un risque d lectrocution sence de nombreuses instructions de maintenance dans le manuel fourni avec l appareil i Le point d exclamation dans un triangle quilat ral sert alerter l utilisateur sur la pr vii Introduction Lexicon ITALIANO IMPORTANTI NORME DI SICUREZZA Conservare le presenti norme per l utilizzo futuro Seguire sempre tutte le istruzioni e gli avvertimenti segnati sull unit e nelle istruzioni operative Utilizzare sempre la corretta tensione di alimentazione Fare riferimento al manuale del costruttore per le caratteristiche di alimentazione Tensioni di rete divers
128. emote control ANGLE button cannot be used to select a camera angle 4 9 1 Make sure playback of a DVD V scene recorded from multiple camera angles is activated Camera angle selection is not available for other disc formats or for DVD V scenes recorded from one camera angle In addition camera angle selection is not available unless playback is activated The disc menu might allow selection of the desired camera angle A program list 4 22 cannot be created 1 Make sure the selected program list is available for the loaded disc The table on page 4 23 indicates the program lists available for each disc format If a Video CD or SVCD is loaded activate stop or resume mode Video CD and SVCD program lists cannot be created when playback or pause mode is activated Playback Control Issues continues on page 5 14 5 13 Troubleshooting amp Maintenance Lexicon Playback Control Issues continued from page 5 13 A certain value cannot be added to a program list 4 22 T Program lists cannot contain values 100 and above or values that are not included on the loaded disc For instance a program title list cannot include a value of 5 if the loaded disc does not include title 5 The program list must include at least one blank field before a new value can be inserted A program list is not stored 1 Make sure a DVD V or DVD RW R is loaded Program lists cannot be stored for other disc formats
129. enu Mode Expert Setup Navigator Start Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single E IX LS SETUP Maxis Audiol A2 Video1 V2 I II ETE General Setup Menu Mode Expert Setup Navigator Parental Lock Off us Bonus Groug Auto Disc Menu Group Playback ROff E IX LS SETUP Mais Audiol A2 Video1 V2 Language Parental Lock Register Code Number a Bm y Return SETUP de Audiol A2 Video1 V2 ETE General Setup Menu Mode Expert Setup Navigator Parental Lock I Bonus Group Auto Disc Menu Group Playback Single EBAY Move SETUP laxis Audiol A2 Video1 V2 ENTES General Setup Menu Mode Expert Setup Navigator Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Il Single EBAL Move SETUP sis Audiol A2 Video1 V2 Language Parental Lock Register Code Number 2 2 3 4 Sy Return SETUP Mais A 11 Appendix Lexicon Parental Lock Password Change Screens Audiol A2 Videol V2 Language Setup Menu Mode Expert Setup Navigator INESSE Password Change Bonus Group Level Auto Disc Menu Country Code Group Playback Single r Daa EIS dili SETUP etis Audiol A2 Videol V2 Language Parental Lock Password Change LX X IBS SETUP Mais Parental Lock Level Screens Audiol A2 Videol V2 ENTE General Setup Menu Mode Expert Setup Navigator Parental Lock I Bonu
130. er case the remote control MENU and TOP MENU buttons can still be used to open and close disc menus and top menus Refer to the Navigating Disc Menus section that begins on page 4 3 for more information Note Some DVDs include menus and top menus that automatically open on the on screen display when the disc is loaded regardless of the Auto Disc Menu parameter setting Controls playback of DVD A groups This parameter has no effect on other disc formats or on DVD As that include just one group of tracks DVD As can include up to nine groups of tracks Select All to automatically begin playback of the next group when playback of the selected group ends Playback will continue until playback of the disc ends Select Single to automatically activate stop mode when playback of the selected group ends In some cases the disc menu or top menu will open on the on screen display when playback ends Note When the disc menu or top menu is used to select a group for playback stop mode is automatically activated when playback of the selected group ends regardless of the Group Playback parameter setting 3 49 Setup Menus Lexicon SETUP MENU SHORTCUTS The remote control F MEMO button can be used to create up to five shortcuts for Setup menu parameters These shortcuts provide convenient access to frequently adjusted Setup menu parameters without navigating through the entire Setup menu Note Shortcuts
131. es repeat playback of the loaded disc Program Activates repeat playback of the currently playing program list Repeat program playback is not available unless program playback is activated when the REPEAT button is pressed Note Repeat playback is not available for Video CDs and SVCDs that include PBC menus To activate repeat playback 1 Make sure playback of the desired title chapter group track folder disc or program list is activated e Repeat program playback is not available unless program playback is activated when the REPEAT button is pressed Repeat Playback continues on page 4 20 Playback Controls Lexicon Repeat Playback continued from page 4 19 Repeat Repeat Repeat Title Folder Disc Repeat Chapter Repeat Group When playback is activated press the REPEAT button to open one of the Repeat bars shown above will open at the top of the on screen display N e The Repeat bar indicates the selected repeat playback mode e If the Repeat bar does not open at the top of the on screen display repeat playback might not be available for the loaded disc The table on page 4 12 indicates the repeat playback modes available for each disc format 3 When the Repeat bar opens press the REPEAT button again to cycle through all repeat playback modes available for the loaded disc e If program playback was activated when the REPEAT button was pressed repeat program playback is avai
132. eutsch Italiano Espa ol 3 36 RT 10 Setup Menus Audiol A2 Video V2 Language esurire OSD Language Audio Language MATTE Subtitle Language BiFrench Auto Language EiGerman DVD Language KHitalian Subtitle Display BSpanish Subtitle Off ROther EDAP Move SETUP MSS Audio Language Determines the language in which audio is heard If the selected audio language is available on the loaded DVD the RT 10 selects the audio track that includes that language If the selected audio language is not included on the loaded DVD the RT 10 selects the default disc audio language Refer to the table on pages A 14 and A 15 Select Other to choose a language other than English French German Italian or Spanish The DVD format recognizes 136 different languages which are listed in the table that begins on page A 14 When Other is selected the Audio Language screen shown above opens on the on screen display To select an Other language 1 When the Audio Language screen opens use one of the following methods to select the desired language a Press the remote control and arrows to scroll through the complete list of available languages When the desired language is highlighted press the remote control ENTER button to select this language and return to the Language tab Audiol A2 Videol V2 Language eure Audio Language List of Languages Code 0 2 a o 5 1 4 y ay Return E Move EE SETUP M
133. f the next page correspond to the lettered items below Display Screen A DVD V Indicates the number of chapters included in each title on the loaded disc Display Screen B DVD A Indicates the number of tracks included in each group on the loaded disc Display Screen C DVD RW R Indicates the name of the loaded disc if available as well as the number of titles included on the recorded and programmed versions of the disc Display Screen D SACD Indicates the total playback time of the loaded disc and the total playback time of each track included on the loaded disc Display Screen E CD SVCD Indicates the total playback time of the loaded disc and the total playback time of each track included on the loaded disc Display Screen F MP3 Indicates the number of tracks included in each folder on the loaded disc RT 10 Playback Controls Display Screens Q Information DVD Information DVD Chapter Title Chapter Group Track Group Track 1 30 06 1 10 01 06 Information DVD RW Disc 0 53 Title Original 1 21 07 1213 02 07 Play List 1 46 08 1 05 03 08 1 12 09 1 04 04 09 1 08 10 1 08 05 10 Ext 1 1 Ext DISPLAY Exit Information SACD Information Compact Disc Information MP3 Total time Time Time 5 23 6 51 Total time Track Time Time 01 5 23 6 51 Folder Track Folder Track 001 1 09 006 1 10 002 111 007 1413 0103 1 03 008 1 05 004 1 22 00e 1 04 005 115 010 1 08 1 2 DISPLAY Sis 4 55 3
134. gressive Scan Component Video Output 2 7 2 10 2 12 3 27 Pure Cinema Parameter 3 30 3 31 R Rack Mounting A 3 Random Button 2 18 4 17 4 18 4 19 4 21 Playback 2 18 4 12 4 17 to 4 18 Rear Panel Connections 2 11 to 2 13 Overview 2 8 to 2 13 Illustration 2 9 Region Code Indicator 2 8 Region Codes 1 4 map 2 8 Registration Product 1 3 REPFRIB Indicator 2 7 REMOT CODE Parameter 3 51 3 53 Remote Control OX 2 8 2 14 Battery Installation 1 9 Command Matrix 2 14 to 2 18 Command Modes Assigning 3 53 Disc Menu Command Matrix 4 5 to 4 6 Illustrations 1 9 2 15 2 16 2 17 2 18 Operation Considerations 2 14 Overview 2 14 to 2 18 Troubleshooting 5 2 R continued Repeat Button 2 18 4 17 4 19 4 20 4 21 Playback 2 18 4 12 4 19 to 4 20 Resume Mode 2 4 2 16 4 14 RETURN Button 2 16 3 4 3 9 4 5 Reverse Skip Scan Button 2 5 RS Parameter 3 18 3 22 RT 10 About the 1 2 to 1 3 Declaration of Conformity A 3 Dimensions A 3 Highlights 1 3 Maintenance 5 15 Operating Temperature A 3 Specifications A 2 to A 3 Weight A 3 S S video Out Parameter 3 24 3 28 Output Connectors 2 10 A 2 SACD Connections 2 13 Playback Parameter 3 11 3 15 Safety Instructions inside front cover i ii iii vi to x Sample Rate Indicator 2 7 Screen Saver Parameter 3 24 3 28 Search Button 2 16 4 6 4 28 4 29 Mode 2 16 4 12 4 28 to 4 30 Security Level Control 3 42
135. guage and Auto Language next page parameter settings e If the Auto Language parameter is set to On the RT 10 automatically selects the default disc subtitle language regardless of the Subtitle Language parameter setting e f the loaded disc does not include subtitles subtitles do not appear on the on screen display regardless of Language tab parameter settings RT 10 Setup Menus Audiol A2 Video V2 Language esae Audiol A2 Videol V2 Language esurire Audiol A2 Video V2 Language esurire OSD Language English OSD Language l I English List of Languages Code 0 2 i French a JiGerman oj 5j aj 4 L Audio Language English Audio Language Subtitle Language English Subtitle Language Auto Language e Auto Language DVD Language Off DVD Language Subtitle Display On Subtitle Display w Subtitle Language DVD Language Htalian I Spanish Subtitle Off Selected Subtitle Subtitle Off av Return EBAY Move SETUP ASAS EBAY Move COEN SETUP ASA E Move edil SETUP ASA e The remote control SUBTITLE button can be used to select the desired subtitle language on the loaded DVD Refer to page 4 8 for more information Auto Language On Off Controls audio track and subtitle language selection When On is selected the RT 10 automatically selects the default disc audio track and subtitle language regardless of the Audio Language 3 37 and Subtitle Language previous page parameter settings
136. h MPEG sources The RT 10 will pass MPEG signals directly to the associated component Select MPEG PCM if the associated component is not compatible with MPEG sources The RT 10 will convert MPEG signals to PCM before passing them to the associated component The MPEG Out parameter is associated with the Setup Navigator Digital Jack prompt 3 7 The MPEG Out parameter and Digital Jack prompt settings have no effect when the RT 10 is not using the digital audio output connector Digital Out On Off Activates and deactivates the RT 10 digital audio output connector Select On to activate the digital audio output connector Select Off to deactivate the digital audio output connector RT 10 Setup Menus Audioi EFE Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out 4 Digital Out RMulti ch Area SACD Playback Men LI Y Move SETUP Mtis SACD Playback 2ch Area Multi ch Area CD Area Controls SACD output format when an SACD is loaded and the RT 10 is using the digital audio output connector This parameter set ting has no effect when another disc format is loaded SACDs can include up to three different audio tracks a stereo track a multi channel track and on hybrid SACDs a 16 bit 44kHz PCM standard CD track Select 2ch Area to select the stereo track for playback Select Multi ch Area to select the multi channel track fo
137. held Basic Operation Lexicon OPEN VIDEO CLOSE ON OFF DIMMER POWER 1 2 3 CLEAR SE 4 5 6 10 9 7 RETURN PROGRAM SEARCH TOP MENU RANDOM r dl gt F MEMO VIDEO ADJ A B REPEAT DISPLAY ANGLE SUBTITLE AUDIO LAST MEMO BD o ke exicon Button Command Activates pause mode which pauses playback of the loaded disc at the current playback time When playback is activated pressing the Pause button activates pause mode at the current playback time In some cases a still frame image appears on the associated display device screen When pause mode is activated pressing the Pause or Play button activates playback at the current playback time When resume or stop mode is active pressing the Pause button performs no function 20 REPEAT Activates random playback 4 17 which plays the loaded disc in a random order of titles chapters groups or tracks Activates repeat playback 4 19 which repeats playback of the loaded disc or the currently playing title chapter group track folder or program list 21 0 10 Activates A B repeat playback 4 21 which repeats playback from a user defined start time point A to a user defined end time point B o m o gt i c 9 22 Opens and closes the Video Adjust bar which can be used to make exact detailed adjustments of video settings Refer to the Video Adjust section that begins on page 3 29 for more
138. here is no audio 1 Deactivate the following playback modes if applicable stop mode resume mode pause mode still frame playback frame by frame playback and slow playback Audio automatically mutes when these playback modes are activated Examine the rear panel to ensure that the required audio output connection 2 12 has been made and that audio cables have been fully inserted RT 10 Troubleshooting amp Maintenance 3 Make sure all associated components are powered on and configured with the correct settings In particular make sure volume is set to an audible level 4 Make sure the RT 10 has a digital and an analog audio output connection 2 13 Some disc formats such as DVD As and SACDs do not generate digital audio output signals 5 Make sure the RT 10 is not connected to the phono turntable audio input connector on the associated component 6 Clean the loaded disc 5 16 CAUTION Dirty or damaged discs such as those shown below might affect playback performance or damage the RT 10 Do not attempt to load cracked chipped scratched warped dirty or otherwise damaged discs in the disc drawer E gt 7 Clean the RT 10 audio output connectors the associated component audio input connectors and the audio cable plugs to ensure that the connectors and plugs are not dirty or oxidized The RT 10 is powered on but there is no digital audio 1 Ifthe E FF indicator appears on the fro
139. ht appears on the on screen display When the MP3 Navigator is closed and an incompatible MP3 track is selected the message UNPLAYABLE MP3 FORMAT appears on the on screen display The RT 10 might require a few seconds to activate playback of an MP3 track that is included in a complex MP3 file structure When this occurs the message Please wait a moment appears on the on screen display RT 10 Troubleshooting amp Maintenance Some MP3 tracks appear to be missing from the loaded disc 1 The RT 10 recognizes a maximum of 250 folders per disc and 250 tracks per folder It ignores all folders and tracks that exceed this number Playback does not begin from a bookmarked playback time on the loaded disc 1 Playback might have automatically activated from the beginning of the disc when the disc was loaded If this occurs press the Stop button to activate stop mode Then press the remote control LAST MEMO button to activate playback from the bookmarked playback time 2 Make sure a DVD V DVD RW R or Video CD that does not include PBC menus is loaded Last memory playback is not available for other disc formats The table on page 4 12 indicates the playback modes available for each disc format 3 The bookmark might have been deleted The oldest bookmark is automatically deleted when the sixth bookmark is created Video CD bookmarks are automatically deleted when the disc drawer is opened or when the RT 10 is powered off
140. ideo CD SVCD MP3 Playback Available Available Available Available Available Available Available Last Memory Available Not Available Not Available Not Available Available Not Available Not Available Stop Available Available Available Available Available Available Available Resume Available Not Available Not Available Not Available Available Not Available Not Available Pause Available Available Available Available Available Available Available Still Frame Available Availablet Not Available Not Available Available Available Not Available Frame by Frame Available Availablet Not Available Not Available Available Available Not Available Slow Available Availablet Not Available Not Available Available Available Not Available Random Title Chapter Group Track Not Available Track Available Available Track eer Te chapter croup Tas Tawan Tad Des o annes senes a ole A B Repeat Available Availablet Not Available Available Available Available Not Available Program Title Chapter Group Track Track Track Track Track Track Search ecos E Sais Track Track Track Track Track Folder Display Available Available Available Available Available Available Available This table provides a general overview of the playback modes available for each disc format However these modes might not be available for all discs within each format These modes are available for DVD As that include video These modes are not available for Video CDs and SVCDs that
141. igital PCM or MPEG Dolby Digital PCM or MPEG 5 1 Channel 2 Channel CD SVCD MP3 Front L R Mute Mute Mute Front L R Front L R 5 1 Channel 2 Channel 2 channel downmix SACD Mute Mute Mute Mute Mute 5 1 Channel Front L R Audio2 continues on page 3 18 3 17 Setup Menus Lexicon Audio2 continued from page 3 17 Speaker Setting Start Opens the Speaker Setting screens which can be used to set speaker sizes and distances when the RT 10 is using the 5 1 channel analog audio output connectors Speaker size and distance settings have no effect when the RT 10 is using the 2 channel analog audio output connectors or digital audio output connector Note RT 10 speaker settings do not need to be configured when the RT 10 is connected to an associated component such as the MC 12 Digital Controller which allows speaker settings to be configured for analog audio sources The associated component must not be using analog audio connections in bypass Default Possible Default Possible Parameter j Size Setting Size Settings Distance Setting Distance Settings L R Larget Larget 10 0ft 1 0 to 30 0ft C Large Small 3 10 0ft 1 0 to 36 5ft Large Off Ls Large Small 10 0ft 1 0 to 36 5ft Large Off RS Large Small 3 10 0ft 1 0 to 36 5ft Large Off sw On On 10 0ft amp 1 0 to 36 5ft Off can be s
142. ine 8 increments Sharpness Mid 4 2 4 soft to fine 8 increments Detail 6 0 2 off to max 8 increments White Level 4 4 4 min to max 8 increments Black Level 4 4 4 min to max 8 increments Black Setup 7 5 IRE 7 5 IRE 7 5 IRE O IRE 7 5 IRE Gamma 4 4 4 to 8 increments Hue 4 4 4 green to red 8 increments Chroma Level 4 4 4 min to max 8 increments Chroma Delay 4 4 4 to 8 increments Memory Off Off Off Off 1 2 3 Prog Motion 4 4 4 fast to slow 8 increments The RT 10 is manufactured for sale in several different countries The default Video Adjust parameter settings listed in the table shown above might differ among versions Video2 continues on page 3 32 3 31 Setup Menus Lexicon Video2 continued from page 3 31 Video Memory Select Sharpness High Video Setup Ia 9 Move PureCinema Autol MN id Sharpness Mid Ia Move Select Check Ia 9 Move YNR Off P 111111 max Detail AU Move Select Check AU Move CNR Off HA 111111 max White Level AP Move Select Check AU Move MNR Off 111 111 max Black Level Ia 9 Move Select Check Ia 9 Move BNR Off 1111 111 max Black Setup Ia 9 Move Select Check AU Move Video Adjust continued Gamma to Controls the brightness of darker picture elements Hue green to red Controls the red to green color balance of video sources Chroma Level min to max Controls the color saturation of video sources soft HeH fine Gamma o I
143. ingapore 1907 sg Brazil 0218 br Japan 1016 jp Spain 0519 es Canada 0301 ca Korea Republic of 1118 kr Switzerland 0308 ch Chile 0312 cl Malaysia 1325 my Sweden 1905 se China 0314 cn Mexico 1324 mx Taiwan 2023 tw Denmark 0411 dk Netherlands 1412 nl Thailand 2008 th Finland 0609 fi New Zealand 1426 nz United Kingdom 0702 gb France 0618 fr Norway 1415 no United States 2119 us Germany 0405 de Pakistan 1611 pk RT 10 Appendix INSTALLATION WORKSHEET Setup Navigator Setting Audio1 Setting Audio2 Setting Setup Navigator Audio DRC Audio DRC OSD Language TV Type Dolby Digital Out DTS Out Speaker Setting Gain Setting Analog Jacks Linear PCM Out CD Digital Direct Center Speaker MPEG Out Surround Speakers Digital Out Sub woofer SACD Playback Digital Jack 96kHz PCM Audio Exit Setup Navigator Refer below for Speaker Setting amp Gain Setting Speaker Setting amp Gain Setting Speaker Size Speaker Distance Output Level Test Tone L R Front Left Right Large C Center LS Surround Left RS Surround Right SW Subwoofer Appendix Lexicon Installation Worksheet continued from page A 17 Video1 Setting Video Adjust Setting Language Setting TV Screen PureCinema OSD Language Component Video YNR Audio Language Video Out CNR Subtitle
144. io ed ispezione Dopo aver disimballato l unit salvi tutto il materiale d imballaggio in caso Lei abbia bisogno di spedire l unit Ispezioni attentamente i moduli ed il materiale d imballaggio per vedere se riportano segni di danno Riporti subito ogni segno di danno al corriere riferisca il malfunzionamento dell attrezzatura al suo rivenditore Retirando a embalagem e Inspecionando Depois de desembalar a unidade guarde a embalagem caso precise enviar a unidade para manutenc o Inspecione cuidadosamente o m dulo e a embalagem procurando sinais de dano Avise loja qualquer tipo de dano ou mal funcionamento do equipamento xi 1 De Getting Started About the RIO 2a de XC RC RR ani eee ER e REX SU Xu 1 2 Highlights e Product Registration Installation Considerations llle 1 3 Do DoNot DVD V REGIONS s cake E dd E oca cao ew E Rd Face dee dod a Edu E 1 4 Disc Compatibility 05 05 verdes ui dd edel EOD eate OES Bede 1 5 Discs to Avoid Disc Care amp Handling s oe bv awe errar aci E EA 1 8 Do DoNot Remote Control Battery Installation llle 1 9 Getting Started Lexicon ABOUT THE RT 10 Thank you for purchasing the RT 10 Disc Player a reference quality universal disc transport designed to provide superior audio and video performance with virtually any 3 or 5 inch optical media disc format Based on leading edge DVD and SACD research the RT 10 supports DVD V DVD A
145. ionamento ed alla i ll presente triangolo impresso sul componente avverte utente della presenza nella manutenzione PORTUGUESE INSTRU ES IMPORTANTES DE SEGURAN A Guarde essas instru es para uso posterior Siga todas as instru es e fique atento aos avisos marcados na unidade e nas instru es de operac o Sempre use com a voltagem correta Veja no manual de instru es do fabricante qual a alimentac o necess ria Lembre se que voltagens de operac o diferentes podem precisar de um cabo ou plug diferentes N o instale a unidade em um suporte sem ventilac o ou diretamente acima de equipamentos que produzam calor como transformadores Observe a temperatura ambiente m xima de operac o indicada na especificac o do produto O revestimento da unidade provido de fendas e aberturas para ventilac o para assegurar uma operac o confi vel e evitar que a unidade se superaqueca N o bloqueie cubra ou insira objetos nas aberturas Nunca derrube l quido de qualquer esp cie na unidade Nunca ligue sa das de amplificadores de udio diretamente a qualquer dos conectores da unidade Para evitar danos de choque ou fogo n o exponha a unidade chuva ou umidade ou opere a onde haja exposic o gua N o tente operar a unidade se ela for derrubada danificada exposta l quidos ou apresente uma mudanca de performance not vel indicando a necessidade de manutenc o Esta unidade s deveria se
146. is recommended to set the Screen Saver parameter 3 28 to On to prevent the appearance of ghost images on the display device screen Audio automatically mutes when still frame playback is activated To activate still frame playback When playback is activated press the Pause button If a still frame image does not appear on the display device screen still frame playback might not be available for the loaded disc The table on page 4 12 indicates the playback modes available for each disc format To deactivate still frame playback Press the Play or Pause button to reactivate playback at the current playback time Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time Playback Controls Lexicon FRAME BY FRAME PLAYBACK Mes The remote control Pause and buttons can be used to activate frame by frame playback which plays the loaded disc one frame at a time in the selected direction Video CDs are not compatible with reverse frame by frame playback Audio automatically mutes when frame by frame playback is activated To activate frame by frame playback 1 When playback is activated press the Pause button to pause playback at the current playback time When pause mode is activated press and release the or butto
147. ivated until playback resumes Play Button Activates playback of the loaded disc at regular playback speed When pause or resume mode is activated pressing the Play or Pause button activates playback at the current playback time When stop mode is activated pressing the Play button activates playback from the beginning of the loaded disc When the disc drawer is open pressing the Play button closes the disc drawer and activates playback from the beginning of the loaded disc 7 Pause Button Il Activates pause mode which pauses playback of the loaded disc at the current playback time When playback is activated pressing the Pause button activates pause mode at the current playback time In some cases a still frame image appears on the associated display device screen When pause mode is activated pressing the Pause or Play button activates playback at the current playback time When resume or stop mode is active pressing the Pause button performs no function Stop Button m Activates resume mode which pauses playback of the loaded disc at the current playback time The Stop button can also be used to activate stop mode which stops playback of the loaded disc The table on page 4 12 indicates the playback modes available for each disc format When playback or pause mode is activated pressing the Stop button activates resume or stop mode In some cases the Stop button must be pressed twice in succession to activate stop mo
148. k Press the remote control CLEAR button to activate playback from the current playback time The Random Off bar shown above right will open at the top of the on screen display to indicate that random playback has been deactivated Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time RI 10 Playback Controls REPEAT PLAYBACK REPEAT e The remote control REPEAT button can be used to activate repeat playback which repeats playback of the currently playing title chapter group track folder or program list The table on page 4 12 indicates the repeat playback modes available for each disc format e Repeat playback is not available for Video CDs and SVCDs that include PBC menus e Repeat playback is automatically deactivated when random playback or A B repeat playback is activated the remote control CLEAR STOP PREV NEXT RANDOM or A B button is pressed Repeat Playback Modes Title Activates repeat playback of the currently playing title Chapter Activates repeat playback of the currently playing chapter Group Activates repeat playback of the currently playing group Track Activates repeat playback of the currently playing track Folder Activates repeat playback of the currently playing folder All or Disc Activat
149. l VIDEO ADJ button to open the Video Adjust bar shown above left 2 When the Video Adjust bar opens press the remote control 4 and arrows to highlight the Video Memory Select option Then press the ENTER button to select this option ene KISS PDP Memory1 Memory2 Memory3 3 When the Video Memory Select bar opens press the 4 gt a and v arrows to highlight the desired Video Adjust bank e When a bank is highlighted its settings are automatically applied to the picture on the display device screen allowing for previewing of bank settings These settings are automatically unapplied when a new bank is selected or the Video Memory Select bar is closed Note Depending on the loaded disc and the associated display device previewed Video Adjust bank settings might not be unapplied when a new bank is highlighted If this occurs it is required to select a new Video Adjust bank to cancel the previewed settings The selected bank settings will be automatically applied to the picture on the display device screen When the desired Video Adjust bank is highlighted press the ENTER button to select this bank Its settings will be automatically applied to the picture on the display device screen RT 10 Setup Menus SANA Video2 Language General Background Video Adjust Still Picture On Screen Display l Angle Indicator Video Adjust On Screen Display Angle Indicator EBAY Move SETUP Mais EDAP Mo
150. lable Other repeat playback modes are not available Note The Repeat bar automatically doses a few seconds after the last command is received When this occurs the selected repeat playback mode is automatically activated Repeat Track Repeat All Program Repeat Repeat Off 4 When the desired repeat playback mode is selected press the Play button or the remote control ENTER button to activate the selected repeat playback mode e Select Repeat Off to deactivate repeat playback This option is only available if program playback was activated when the REPEAT button was pressed To deactivate repeat playback e Press the remote control CLEAR button to activate playback from the current playback time The Repeat Off bar shown above right will open at the top of the on screen display to indicate that repeat playback has been deactivated e Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time RI 10 Playback Controls A B REPEAT PLAYBACK A B e The remote control A B button can be used to activate A B repeat playback from a user defined start time point A to a user defined end time point B A B repeat playback can be configured to repeat playback of the user defined playback loop once or continuously e A B repeat playba
151. lay Bars continued from page 4 35 To deactivate display mode Press the DISPLAY button until the display bar closes The letters and numbers in the display bar illustrations shown on pages 4 32 and 4 33 correspond to the numbered items in the tables that continue below Display Bar M MP3 No Description 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing folder and track 3 Indicates the elapsed playback time of the currently playing track Indicates the display bar format 5 Indicates the current transmission rate To open a display bar 1 Make sure playback or pause mode is activated 2 When playback or pause mode is activated press the remote control DISPLAY button to open one of the display bars shown on pages 4 32 and 4 33 The tables that begin on page 4 32 indicate the display bars available for each disc format 3 Press the DISPLAY button again to cycle through all display bars available for the loaded disc 4 36 M P roublesh ooting amp Maintenance Troubleshooting ax qne RC ER ARIADNA Power Issues Remote Control Issues e Video Output Issues e Audio Output Issues e Playback Issues e Setup Menu Issues e Playback Control Issues e Miscellaneous Issues RT 10 Maintenance sl 5 15 Disc Maintenance 5 16 Restoring Factory Default Settings llle 5 16 Troubleshooting amp Maintenance Lexicon TROUBLESH
152. lerta de la presencia de una tensi n peligrosa no aislada en el interior del equipo una tensi n que puede ser suficiente como para constituir un riesgo de descarga el ctrica mantenimiento importantes en los documentos que acompa an el producto 1 Este tri ngjlo que aparece en su equipo le alerta de instrucciones operativas y de FRANCAIS INSTRUCTIONS IMPORTANTES RELATIVES A LA SECURITE Conservez ces instructions pour pouvoir vous y r f rer ult rieurement Suivez toutes ces instructions et tenez compte de tous les avertissements indiqu s sur l appareil et dans la documentation fournie avec l appareil Utilisez toujours la tension secteur correcte Consultez les instructions du fabricant pr cisant les caract ristiques d alimentation respecter Attention le type de cordon secteur et ou de prise secteur peut varier selon des tensions en vigueur dans l installation N installez pas l appareil dans un Rack mal ventil ou directement au dessus d un appareil d gageant de la chaleur comme un amplificateur de puissance Respectez la temp rature maximale de fonctionnement pr cis e dans les caract ristiques techniques Les ouvertures dans le boitier assurent la bonne ventilation de l appareil vitent toute surchauffe et assurent le bon fonctionnement du syst me Veillez ne pas obstruer couvrir ou ins rer d objets dans ces ouvertures Veillez ne pas renverser de liquide sur l appareil Ne reliez jamais direct
153. low the selected command LOADING DISCS Discs require special care and handling to ensure optimal performance When loading discs pay particular attention to the bulleted items that begin in the next column and to other precautions that appear throughout this user guide Refer to the Disc Compatibility 1 5 Disc Care amp Handling 1 8 and Disc Maintenance 5 16 sections for more information CAUTION The RT 10 is a single disc player Do not attempt to load more than one disc in the disc drawer at one time This might cause damage to the RT 10 the discs or both Dirty or damaged discs such as those shown below might affect playback performance or damage the RT 10 Do not attempt to load cracked chipped scratched warped dirty or otherwise damaged discs in the disc drawer Y Note the following The RT 10 is compatible with DVD V DVD A DVD RW R SACD Audio CD CD RW R Video CD SVCD and MP3 formats that meet the requirements outlined in the Disc Compatibility section 1 5 The RT 10 is not compatible with DVD ROM DVD RAM CD ROM except those that include MP3 tracks and Photo CD formats The RT 10 is compatible with 5 inch 12cm and 3 inch 8cm conventional round discs Do not attempt to load discs with other size and shape characteristics such as those shown below All discs must align with the circular guide inside the disc drawer Hold discs at their center hole and outer edges as shown belo
154. ls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation If the product has been dropped or damaged in any way When the product exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition WALL OR CEILING MOUNTING The product should not be mounted to a wall or ceiling HEAT The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat This triangle which appears on your component alerts you to important operating and maintenance instructions in this accompanying literature TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE Do not remove the cover from the unit Do not insert anything into the unit through the ventilation holes
155. me states Customer Support Tel 781 280 0300 Fax 781 280 0495 Sales Fax 781 280 0499 Service lexicon H A Harman International Company Lexicon Inc 3 Oak Park Bedford MA 01730 1413 USA Tel 781 280 0300 Fax 781 280 0490 www lexicon com Customer Support Tel 781 280 0300 Fax 781 280 0495 Sales Fax 781 280 0499 Service Lexicon Part No 070 15658 Rev O 01 03
156. menu can be opened while the RT 10 is in playback pause resume or stop mode However certain parameters cannot be adjusted when some playback modes are activated In addition certain parameters can be adjusted when playback is activated although the setting does not take effect until stop mode is activated The Setup menu can be opened regardless of the format of the loaded disc However certain parameters cannot be adjusted when some disc formats are loaded Certain parameter settings have no effect on some disc formats When a parameter is selected colored boxes appear next to each parameter setting on the on screen display to indicate the disc formats on which each setting has an effect The table shown below indicates the disc formats each color represents Color Disc Formats Green All disc formats Blue DVD V DVD A DVD RW R Yellow DVD V and Video CD Orange DVD A Audio CD SACD This table lists colors that might differ depending on RT 10 settings and display device capabilities The icon shown at the right appears on the on screen display when a Setup menu parameter that is exclusive to DVD formats is adjusted while another disc format is loaded These adjustments will take effect the next time a DVD is loaded DVD AUDIO1 Includes parameters that control digital audio output format Parameter Default Setting Possible Settings Audio DRC Off Off e On Dolby Digital Out Dolby Digital e
157. meter is associated with the Setup Navigator TV Type prompt 3 5 The TV Type prompt Widescreen 16 9 setting is equivalent to the TV Screen parameter 16 9 Wide setting and the TV Type prompt Standard 4 3 setting is equivalent to the TV Screen parameter 4 3 Letter Box setting The TV Screen parameter also offers settings for 16 9 Compressed and 4 3 Pan amp Scan viewing Refer to the table on pages 3 25 and below for more information Note e Some discs do not allow video output format adjustments e Neither the TV Screen parameter nor the TV Type prompt can be adjusted when the RT 10 is in playback mode Video Recording TV Screen Display Device Display Device E Appearance Format Parameter Aspect Ratio Setting 16 9 Wide 16 9 Full 16 9 Images appear in widescreen 16 9 format 16 9 Wide 16 9 Normal 4 3 Images appear between black bars at either side of the screen 16 9 Wide 16 9 Full 16 9 Images appear stretched across the screen It is recommended to set the display device to Normal 4 3 16 9 Compressed 16 9 Full 16 9 Images appear between black bars at either side of the screen This setting is recommended for display 43 devices with a fixed aspect ratio and a progressive scan component video input connector 3 26 RT 10 Setup Menus INT TANYA Videol NAME OCT El TV Screen 16 9 Wide Component Video MIES Video Out Rinterlace
158. min HeeH 1111 max Video Adjust YNR off HH 111111 max Black Level min H 1111 max Still Playback Auto CNR off Ret tit max Black Setup item 7 51RE Screens On Screen Display On MNR off I 111 max Gamma HH Angle Indicator On BNR off HH 111111 max Hue green H 1111 red Sharpness High IS Chroma Level min eee II max Sharpness Mid soft H 1111 fine Chroma Delay Ree I DAL ENTER ECN SETUP fae Memory 1 2 3 Memory Off MESS Video Memory Select Video Adjust TWCRT POP Memory1 Memory2 Memory3 Video Memory Select PureCinema Autol BENI MOT Sharpness Mid soft HH 1111 fine Hue green HH 1111 red 1 Move elect DISPLAY Check 1 Move ENTER RAAE DSP LAY eli MU Move ENTER ESA DISPLAY eu as YNR CS Detail Off HH 111111 max Chroma Level min HAH 1111 max 1 Move Select DISPLAY Check 1 Move Select DISPLAY Check MU Move Select DISPLAY Check CNR CI max White Level min HHH 1111 max Chroma Delay HHH 1 Move Select DISPLAY Check MU Move Select DISPLAY Check MU Move Select DISPLAY Check MNR Off 111111 max Black Level min H H 1111 max Off BEP AP Move Select DISPLAY Check MU Move Saa DISPLAY LONEOS Select Check BNR Off 11111111 max Black Setup OIRE SIRE Prog Motion RRR I s AP Move ENTER EIS diis PLAY elTe Move ENTER EIE DISPLAY e MU Move J ENTER ESI diDis PLAY el ET Sharpness High o Gamma H H NS MU Move ENTER ESE dipis PLAY eii AP Move ENTER EIS Mi DISPLAY eu as A 9
159. mine power cords for damage on a regular basis CAUTION Never make or break connections to the RT 10 unless the RT 10 and all associated components are powered off 3 Component Video Output Connectors Provide component video output All versions include one group of RCA and one group of BNC connectors labeled COMPONENT VIDEO Some versions also include a Mini D Ribbon connector labeled D1 D2 All component video output connectors can be used at the same time Rear Panel Overview continues on page 2 10 2 9 Basic Operation Lexicon Rear Panel Overview continued from page 2 9 The numbers in the RT 10 rear panel illustration shown on page 2 9 correspond to the numbered items that continue below 3 Component Video Output Connectors continued The component video output connectors provide progressive scan and interlaced component video output Progressive scan component video output converts interlaced video signals to progressive video signals doubling the amount of video information sent to a compatible display device The result is a higher quality more stable image with fewer video artifacts Composite Video Output Connectors Provide composite video output All versions include two RCA connectors labeled VIDEO All composite video output connectors can be used at the same time S video Output Connector Provide S video output All versions include one S video connector labeled S VIDEO
160. mode In some cases the Stop button must be pressed twice in succession to activate stop mode e f the disc menu automatically opens on the on screen display press the remote control MENU or TOP MENU button to close the disc menu When the disc is loaded press the LAST MEMO button to activate playback from the bookmarked playback time The Last Memory bar shown at the bottom of the previous column will open at the top of the on screen display to indicate that last memory playback is activated To delete a bookmark 1 Make sure a disc for which a bookmark has been created is loaded When the disc is loaded press the Play button to activate playback When playback is activated press the LAST MEMO button to open the Last Memory bar shown at the bottom of the previous column e If no bookmark has been created for the loaded disc performing this step will create a bookmark at the current playback time If this occurs begin again with step 1 When the Last Memory bar opens press the LAST MEMO button again to delete the bookmark Playback Controls Lexicon STOP MODE STOP The front panel and remote control Stop button can be used to activate stop mode which stops playback of the loaded disc In some cases the Stop button must be pressed twice in succession to activate stop mode e When an MP3 is loaded activating stop mode does not deselect the selected folder unless random playback or program mode is
161. n and close DVD A top menus Pressing the MENU button performs no function Number Select the corresponding menu item When menu Perform no function Same as DVD V amp DVD A In Perform no function Buttons items are numbered pressing a number button some cases pressing a number selects the menu item with the corresponding button activates playback of number When menu items are not numbered corresponding track when the pressing a number button selects the menu item in PBC menu is open the corresponding position For instance pressing the number 1 button selects the first menu item Refer to page 2 15 for instructions to select menu items 10 and above CLEAR Performs no function Performs no function Performs no function Deletes the selected track from the MP3 program list 4 27 PROGRAM Performs no function Performs no function Performs no function Adds the selected track to the MP3 program list 4 27 ENTER Selects the highlighted disc menu item Same a DVD V amp DVD A Performs no function Activates playback of the selected track or the first track in the selected folder RETURN Closes the current disc menu screen and opens the Performs no function Opens and closes the PBC menu Closes the MP3 Navigator previous menu screen When the first menu screen is open pressing the RETURN button performs no function When a DVD A is loaded pressing the RETURN button opens the browsable pictures provided the loaded disc
162. n to activate reverse or forward frame by frame playback The picture on the associated display device screen will rewind or advance one frame in the selected direction e Video CDs are not compatible with reverse frame by frame playback Continue pressing and releasing the or button to continue frame by frame playback in the selected direction To deactivate frame by frame playback Press the Play button to activate playback at the current playback time Press the Stop button to activate stop or resume mode In some cases the Stop button must be pressed twice in succession to activate stop mode When stop mode is activated playback cannot be reactivated at the current playback time SLOW PLAYBACK Q0 amp e The remote control Pause 4 and buttons can be used to activate slow playback which plays the loaded disc at 1 16 1 8 1 4 or 1 2 regular playback speed in the selected direction Video CDs are not compatible with reverse slow playback Audio automatically mutes when slow playback is activated To activate slow playback 1 When playback is activated press the Pause button to pause playback at the current playback time When pause mode is activated press and hold the or button for about 1 second to activate reverse or forward slow playback at 1 16 regular playback speed e Video CDs are not compatible with reverse slow playback Press and release the or button again to cycle through
163. nd Speakers Not Present Surround speakers are connected to an amplifier Dal Move ESC SETUP flea Center Speaker Indicates the presence or absence of a center speaker When Present is selected the RT 10 passes center channel signals to the Center analog audio output connector When Not Present is selected the RT 10 redirects center channel signals to the Front L R analog audio output connectors Present Not Present The Center Speaker prompt is associated with the Audio2 tab Speaker Setting option which can be used to set speaker sizes and distances Surround Speakers Indicates the presence or absence of surround speakers When Present is selected the RT 10 passes surround channel signals to the Surround L R analog audio output connectors When Not Present is selected the RT 10 redirects surround channel signals to the Front L R analog audio output connectors Present Not Present The Surround Speakers prompt is associated with the Audio2 tab Speaker Setting option which can be used to set speaker sizes and distances 3 6 RT 10 Setup Menus Audiol A2 Videol V2 Language Audiol A2 Videol V2 Language Setup Navigator ESTRENAN Dolby Digital Dolby Digital DTS Amp Connection Amp Connection Dolby Digital MPEG Sub woofer Digital Jack Dolby D DTS MPEG Not Present PCM DSub woofer is connected Not Connected to an amplifier D Compatible with Dolby Digital C Da Move Ea SETUP ASAS C me Move ES dili SE
164. nections in bypass Variable output level settings seem ineffective 1 Make sure the CD Digital Direct parameter 3 24 is set to Off When this parameter is set to On variable output level settings are ineffective Make sure the RT 10 and all associated components are configured with the correct output level settings RT 10 variable output levels do not need to be configured when the RT 10 is connected to an associated component such as the MC 12 or MC 8 Digital Controller which allows output levels to be calibrated for analog audio sources Test Tones 3 21 will not activate 1 Press the Stop button to activate stop mode Test Tones cannot be activated when playback resume or pause mode is activated 5 10 RT 10 Troubleshooting amp Maintenance 2 Close the disc drawer Test tones cannot be activated when the The Parental Lock Level 3 45 and Country Code 3 47 disc drawer is open controls are not available 3 Set the Analog Jacks prompt 3 5 or the Audio Out parameter 1 Make sure the Parental Lock Password control 3 42 has been 3 1 6 to 5 1 Channel Test tones cannot be activated when used to assign a password The Level and Country Code these parameters are set to 5 1 Channel or None controls are not available unless a password has been assigned 4 Set the Screen Saver parameter 3 28 to Off Test Tones automatically mute when the Lexicon screen saver appears on the on screen display Video Adju
165. nerates 192 or 176 4kHz signals the RT 10 automatically downsamples these signals to 96 or 88 2kHz before passing them to the associated component The RT 10 will not pass 192 or 176 4kHz signals even when the Linear PCM parameter 3 13 is set to Down Sample Off If a DVD is loaded the disc might have a copy protection signal 1 6 that prevents it from generating 96kHz signals When a copy protection signal is present the RT 10 automatically downsamples signals to 48kHz before passing them to the associated component even if the Linear PCM parameter 3 13 is set to Down Sample Off A humming sound is present in the audio 1 If a cable TV connection is present disconnect the cable from the wall outlet If this eliminates the humming sound an isolation device is required Contact the cable provider for assistance Disconnect components one at a time to isolate the problem Once the problem is identified make sure the component is properly grounded and connected to the same electrical circuit as the RT 10 Dialog sounds muffled 1 If the RT 10 has a stereo audio output connection set the Audio Out parameter 3 16 to 2 Channel If the speaker setup does not include a center speaker make sure a center speaker is not selected with the component that was used to configure speaker settings e f the RT 10 was used to configure speaker settings make sure the Speaker Size screen C parameter 3 22 is set to Off e If
166. nglish Audio Language English Subtitle Language English Auto Language On DVD Language English Subtitle Display On Subtitle Off Selected Subtitle A Move Exit EN Audio MEN V2 Language General Audio Out 2 Channel Speaker Setting OSet audio Digital output format tone adjust A Move Exit Audiol A2 Videol V2 Language esurire OSD Language English Audio Language English Subtitle Language English Auto Language On Setup subtitle and audio language EBAY Move Exit Audiol A2 V2 Language General TV Screen 16 9 Wide Component Video Progressive Video Out Video S Video Out S2 Frame Search Off Screen Saver Off EBAY Move Exit Audiol A2 Videol V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single Dal Move Exit Audiol A2 V2 Language General TV Screen 16 9 Wide Component Video Progressive Video Out Video ORGA E Adjust video format quality EBAY Move Exit Audiol A2 Video1 Language Setup Menu Mode Basic Setup Navigator Parental Lock Off us DOther setups DOY Move Exit 3 10 RT 10 Setup Menus Note the following The RT 10 is manufactured for sale in several different countries Certain parameters are not available on some versions Default parameter settings might differ among versions The Setup
167. nt panel display set the Digital Out parameter 3 14 to On to reactivate the digital audio output connectors Make sure the loaded disc generates digital audio output signals Some discs such as DVD As and SACDs only generate analog audio output signals If the loaded disc does not allow audio downmixing set the Audio Out parameter 3 16 to 5 1 Channel Discs such as DVD As that do not allow audio downmixing will mute the digital audio output connectors when the Audio Out parameter is set to 2 Channel Make sure the Dolby Digital DTS Linear PCM and MPEG parameter 3 12 to 3 14 settings are compatible with the associated component For instance the Dolby Digital parameter should be set to Dolby Digital if the associated component is compatible with Dolby Digital sources and to Dolby Digital PCM if the associated component is not compatible with Dolby Digital sources The RT 10 is powered on but there is no stereo audio 1 Set the Audio Out parameter 3 16 to 2 Channel When this parameter is set to 5 1 Channel the RT 10 passes multi channel audio output to the associated component Make sure the loaded disc allows audio downmixing Discs such as DVD As that do not allow audio downmixing always output multi channel audio even when the Audio Out parameter 3 16 is set to 2 Channel Make sure an audio track recorded in stereo format is selected on the loaded disc 4 7 The remote control AUDIO button or the disc me
168. ntation to the connector Make sure the cable plug is properly aligned with the connector before the cable plug is inserted When the cable plug is inserted the protective shutter on the connector will open and the plug will click into position indicating that the cable plug is fully inserted Analog Audio Connections All versions offer analog audio output on eight RCA connectors labeled Front L R 2 pairs Surround L R Center and Sub When making these connections use standard audio cables with RCA plugs on each end The Audio Out parameter 3 16 can be used to configure these connectors to provide 2 or 5 1 channel analog audio output The analog audio output connectors are color coded to match the cable plugs Make sure the cable plugs are fully inserted for a solid connection DVD A SACD Connections An analog audio output connection is required for SACD and recommended for DVD A playback When DVD A sources are sent to the digital audio output connectors multi channel signals are downmixed and high sample rates of 176 4 or 192kHz are downsampled to 44 1 48 88 2 or 96kHz The downsampled rate differs from disc to disc Basic Operation Lexicon REMOTE CONTROL OVERVIEW The RT 10 remote control provides full operation of the RT 10 executing functions such as menu navigation that are not available from the front panel The numbers in the RT 10 remote control illustrations shown on pages 2 15 to 2 18 correspond
169. ntrol Command Modes The RT 10 remote control can be used to operate two RT 10s installed in the same system when the DVD 1 command mode is assigned to one RT 10 and the DVD 2 command mode is assigned to the other RT 10 These command modes can also be assigned to the remote control allowing the remote control to operate an RT 10 to which the same command mode is assigned The remote control cannot be used to operate an RT 10 to which a different command mode is assigned except to configure Advanced Setup menu parameter settings Note The DVD 1 command mode is intended for use when two RT 10s are installed in the same system Otherwise avoid assigning the DVD 1 command mode to the RT 10 and the RT 10 remote control When one RT 10 is installed in the system follow the instructions in the next column to assign the DVD 2 command mode to the remote control and the RT 10 The DVD 2 command mode is assigned to the RT 10 when factory default settings are restored The command mode assigned to the remote control is not affected when factory default settings are restored When two RT 10s are installed in the same system follow the instructions below to assign the DVD 1 command mode to one RT 10 and the DVD 2 command mode to the other RT 10 Follow the instructions below to toggle the command mode assigned to the remote control allowing the remote control to provide independent operation of both RT 10s To assign the DVD 2 command mo
170. nu can be used to select the desired audio track audio language and output format Audio Output Issues continues on page 5 6 5 5 Troubleshooting amp Maintenance Lexicon Audio Output Issues continued from page 5 5 The RT 10 is powered on but there is no multi channel audio 1 Set the Audio Out parameter 3 16 to 5 1 Channel When this parameter is set to 2 Channel the RT 10 passes 2 channel audio output to the associated component Dolby Digital DTS and MPEG sources are downmixed to two channels allowing playback of all audio channels recorded on the disc Make sure multi channel audio is available on the loaded disc Multi channel audio is only available for DVD As and SACDs as well as other discs that include Dolby Digital DTS or MPEG encoding Other discs always output 2 channel audio even when the Audio Out parameter 3 16 is set to 5 1 Channel Make sure an audio track recorded in multi channel format is selected on the loaded disc 4 7 The remote control AUDIO button or the disc menu can be used to select the desired audio track audio language and output format The RT 10 automatically downsamples digital audio sources with high sample rates 1 Set the Linear PCM Out parameter 3 13 to Down Sample Off When this parameter is set to Down Sample On the RT 10 automatically downsamples 96kHz PCM signals to 48kHz before passing them to the associated component If the loaded disc ge
171. o 2 11 TRE Indicator 2 7 Troubleshooting 5 2 to 5 15 TV Output Connector 2 10 2 12 to 2 13 3 27 A 3 Screen Parameter 3 3 3 24 3 25 to 3 26 Type Prompt 3 3 3 5 U Unpacking amp Inspection Instructions xi V M OFF Indicator 2 7 Li PFIET Indicator 2 7 Variable Output Levels Setting 3 21 to 3 23 CE Indicator 2 6 Video 1 Tab 3 24 to 3 28 A 8 ills 2 Tab 3 29 to 3 35 A 8 ills A 9 ills ADJ Button 2 18 V continued Video Connections 2 11 to 2 12 ON OFF Button 2 15 Out Parameter 3 24 3 27 Output 2 9 to 2 10 2 11 to 2 13 5 3 to 5 4 A 2 Output Impedance A 3 Performance Specifications A 3 WwW WARNING i iii Warranty Limited inside back cover White Level Parameter 3 30 3 31 Weight RT 10 A 3 Y YNR Luminance Noise Reduction Parameter 3 30 3 31 Notes Notes LIMITED WARRANT Y Lexicon Inc offers the following warranty on this product What is the Duration of this Warranty This warranty will remain in effect for one 1 year from the original date of purchase Who is Covered This warranty may be enforced by the original purchaser and subsequent owners during the warranty period provided the original dated sales receipt or other proof of warranty coverage is presented at time of service What is Covered This warranty covers all defects in material and workmanship on this product except as specified below The following are not
172. o any destination in the United States using the carrier of our choice Pack the unit securely Package insurance is strongly recommended Lexicon Inc Tel 781 280 0300 3 Oak Park Fax 781 280 0490 Bedford MA 01730 1413 USA www lexicon com Include a copy of the original dated sales receipt A copy of the original dated sales receipt must be presented whenever warranty service is required Do not include accessories such as power cords or user guides unless instructed to do so What are the Limitations of Implied Warranties Any implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty What Certain Damages are Excluded Lexicon s liability for a defective product is limited to repair or replacement of that product at our option Lexicon Inc shall not be liable for damages based on inconvenience loss of use of the product loss of time interrupted operation commercial loss or any other damages whether incidental consequential or otherwise How do State Laws Relate to this Warranty Some states do not allow limitations on the duration of implied warranties and or the exclusion or limitation of incidental or consequential damages As such the above limitations may not apply This warranty is not enforceable outside of North America This warranty provides specific legal rights Additional rights may be provided by so
173. ode is activated Video Adjust Start Opens the Video Adjust bar shown above which can be used to make exact detailed adjustments of video settings such as luminance YNR chrominance CNR mosquito MNR and black BNR noise reduction as well as sharpness white black gamma hue and chroma levels Refer to the Video Adjust parameter descriptions that begin on the next page for more information Note The remote control VIDEO ADJ button can also be used to open the Video Adjust bar Video2 continues on page 3 30 3 29 Setup Menus Lexicon Video2 continued from page 3 29 Pure Cinema Auto1 Auto2 On Off Controls DVD V frame rate to simulate cinema screen picture quality Video sources can be recorded on video or film Sources recorded on video have a 30 frames per second NTSC rate and sources recorded on film have a 24 frames per second rate When the Component parameter is set to Progressive the RT 10 converts sources recorded on film to 60 frames per second to create a more natural picture Select Auto1 for most video sources If the picture on the display device screen appears unnatural select another setting Repeat this process to achieve the best picture quality YNR Luminance Noise Reduction off to max Controls the amount of noise reduction applied to the Y component luminance present in video signals CNR Chrominance Noise Reduction off to max Controls the amount of noi
174. olding the Stop button press the On Off button to power the RT 10 on The message RESET OK should appear on the front panel display If it does not factory default settings have not been restored Begin again with step 1 If problems persist contact Lexicon Customer Service at 781 280 0300 or www lexicon com 5 16 A Appendix Specifications se se dp ORE OPI DR ACIER ep ARA a IX end RE Roe SOR A 2 Declaration of Conformity iss ex REIR RR RR Re E RE A 3 Setup Menu SECOS y earn A 4 Table of Languages amp Language Codes oooccooococooooo oo A 14 Table of Country Codes o oooooococoooocooooco ee A 16 Installation Worksheet o IIR A 17 Appendix Lexicon SPECIFICATIONS Note the following e The RT 10 is manufactured for sale in several different countries Each version features a rear panel that includes connectors appropriate to that particular region These specifications include all possible connectors However certain connectors are not included on some versions These instances are noted in the rear panel connector descriptions that begin on page 2 8 e DVD A and SACD test discs were used to determine audio specifications Typical production unit specifications might differ e Specifications are subject to change without notice Audio Output Connectors Analog Digital 4 stereo RCA pairs for Front L R 2 pairs Surround L R Center and Subwoofer 1
175. ons shown on pages 4 32 and 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing group and track Display Bar E PVDA 3 Indicates the elapsed playback time of the currently playing track No Description 4 Indicates the display bar format 1 Indicates whether playback or pause mode is activated 5 Indicates the current transmission rate 2 Indicates the numbers of the currently playing group and track Display Bar H SACD CD SVCD 3 Indicates the elapsed playback time of the currently playing track 4 Indicates the display bar format No Description 5 Indicates the remaining and total playback time of the 1 Indicates whether playback or pause mode is activated currently playing track 2 Indicates the numbers of the currently playing track 3 Indicates the elapsed playback time of the currently Display Bar F DVD A playing track 4 Indicates the display bar format No Description 5 a total playback time of the currently 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing group and track 3 Indicates the elapsed playback time of the currently playing track 4 Indicates the display bar format 5 Indicates the remaining and total playback time of the currently playing group RT 10 Playback Controls Display Bar SACD CD SVCD Display Bar K MP3 No De
176. ored All preferred disc settings are automatically deleted when factory default settings are restored Most DVD Vs include disc menus can be used to select disc settings In some cases certain remote control buttons can also be used to select disc settings without navigating through the disc menu Refer to page 4 7 to 4 9 for more information Disc menu settings do not affect Setup or Advanced Setup menu parameter settings To store preferred disc settings Make sure a DVD V that allows selection of on screen display disc menu language audio track audio language and output format subtitle language camera angle Video Adjust or parental security level settings is loaded Refer to the Navigating Disc Menus section 4 3 for instructions to select on screen display disc menu language audio track audio language and output format subtitle language camera angle Video Adjust or parental security level settings e In some cases certain remote control buttons can also be used to select disc settings without navigating through the disc menu Refer to pages 4 7 to 4 9 for more information When the desired disc settings have been selected press the Play button to activate playback e Pressing the Play button might not activate playback when the disc menu is open on the on screen display If this occurs press the remote control MENU or TOP MENU button to close the disc menu Then press the Play button again to activate playba
177. oses the Setup menu without saving parameter settings that have been selected since the Setup menu was opened When a parameter or setting is selected pressing the RETURN button closes the selected parameter without saving changes When this occurs the cursor moves to the selected Setup menu tab SETUP Closes the Setup menu The Setup menu automatically closes a few seconds after the last command is received Setup Menus Lexicon Setup Menu Expert Mode Setup Menu Basic Mode A2 Videol V2 Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area al Yat NE Exit Audiol A2 Vi Language General Background Gray Video Adjust Still Playback Auto On Screen Display On Angle Indicato On A Move Exit A2 Videol V2 Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Set audio Digital output format tone adjust Ga NE Exit Audiol A2 Vi Language General Background Gray Video Adjust DSet video Adjust video format quality EBAY Move Exit EN Aucio MEN V2 Language General Audio Out 2 Channel Speaker Setting Gain Setting Fix CD Digital Direct Off EBAY Move Exit Audiol A2 Videol V2 Language esurire OSD Language E
178. ossible Default Test Possible Test Gain Setting Gain Settings Tone Setting Tone Settings L R 0 0dB 3 6 0 to 6 0dB Off Auto e On e Off C 0 0dB 3 e 6 0 to 6 0dB Off Auto e On e Off LS 0 0dB 3 6 0 to 6 0dB Off Auto e On e Off RS 0 0dB e 6 0 to 6 0dB Off e Auto e On e Off SW 0 0dB 3 e 6 0 to 6 0dB Off Auto e On e Off These settings are recommended when the RT 10 is connected to an MC 12 or MC 8 Digital Controller When no setting is indicated any setting can be selected Note RT 10 variable output levels do not need to be configured when the RT 10 is connected to an associated component such as the MC 12 or MC 8 Digital Controller which allows output levels to be calibrated for analog audio sources Before output level calibration begins It is recommended to use a Sound Pressure Level SPL meter to calibrate variable output levels An SPL meter is a device that measures the relative loudness of each speaker to ensure accurate output level calibration SPL meters are available at Radio Shack catalog no 33 2050 3 22 RT 10 Setup Menus Eliminate extraneous noises in the listening space such as conversations air conditioners and sounds that filter in through open doors and windows Remove objects including people that obstruct the line of sight path between the SPL meter and the speaker being measured Output levels should be calibrated to be consisten
179. ove Press the 10 button once for numbers in the teens twice for numbers in the twenties and so on Then press the desired number button 0 to 9 to enter the second digit For instance entering a value of 25 requires a remote control command sequence of 10 10 and 5 VIDEO OUTPUT ISSUES The RT 10 is powered on but there is no video 1 Examine the rear panel to ensure that the required video output connection 2 11 has been made and that video cables particularly S video cables have been fully inserted Make sure all associated components are powered on and configured with the correct settings If the LoF indicator appears on the front panel display press the remote control VIDEO ON OFF button to reactivate the video output connectors If the RT 10 has a component video output connection and the associated display device is not progressive scan compatible set the Component Video parameter 3 27 to Interlace or reconnect the RT 10 to the associated display device with an S video or composite video output connection The picture on the associated display device screen appears stretched or otherwise distorted 1 Set the TV Type prompt 3 5 or TV Screen parameter 3 25 to the appropriate setting for the associated display device Make sure all associated components particularly display devices are configured with the correct settings Press the remote control SETUP button to close the
180. owe ESAE nU E 1 2 Highlights e Product Registration Important Safety Instructions isses vi Installation Considerati0nS o oooooooooooo 1 3 Do DoNot Wichtige Sicherheitshinweise o o o oo o vi st a d dadi i DVD V Reglohs se hme iUe nh e ne Rhet 1 4 nstrucciones de seguridad importantes vii 3 P mas E Disc Compatibility 22 zie aa ead hae d 1 5 Instructions importantes relatives la s curit vii Discs to Avoid Importanti norme di sicurezZa 00 0 0 2 Disc Care E Handling ies la ues 1 8 Instru es Importantes de Seguranga viii Do e Do Not p g 6 Vigtig information om sikkerhed ix Remote Control Battery Installation 1 9 T rkeit turvallisuusohjeita o oooooooo o ix Viktig informasjon om sikkerhet o x Section 2 Basic Operation Viktiga s kerhetsf reskrifter o o o o o o ooo o X Front Panel Overview lees 2 2 Front Panel Display Indicators Unpacking and Inspection e ao ee ace xi Rear Panel Overview a a EUR naa na eis ot tinca Se EE 2 8 Auspacken und UberprifunQ o oooooo oo o xi Rear Panel Connections Desembalie einspecci n xi Remote Control OvervieW o o oooooooooo ooo 2 14 ES Pe E A Operation Considerations Command Matrix Contenu de l emballage et inspection xi at IT Disimballaggio ed ispezione
181. own on page 2 9 includes all possible connectors However certain connectors are not included on some versions These instances are noted in the rear panel connector descriptions that begin on page 2 8 All versions require at least one video and one audio connection These are the minimum connections required for playback However it is recommended to configure a digital and an analog audio connection for optimal performance An analog audio output connection is required for SACD playback and recommended for DVD A playback All connections require standard video and audio cables Video Connections Note All video output connectors are active at all times unless deactivated with the remote control VIDEO ON OFF button 2 15 Video Connections continues on page 2 12 Basic Operation Lexicon Video Connections continued from page 2 11 Mini D Ribbon Component Video Output Connector Description Y or Green Green Ground BY B Y or Blue Blue Ground RY R Y or Red Red Ground All other pins are N C no connection 8 9 10111213 14 Whenever possible it is recommended to use a component video output connection All versions offer component video output on a group of RCA or BNC connectors Some versions also offer component video output on a Mini D Ribbon connector Refer to the table and illustration above for more information about the Mini D Ribbon connector Progressive
182. play mode parental lock controls and DVD A playback Parameter Default Setting Possible Settings Setup Menu Mode Expert Expert Basic Setup Navigator N A N A Parental Lock N A N A Bonus Group N A N A Auto Disc Menu On On Off Group Playback Single All Single These parameters only appear when the Setup menu is displayed in expert mode 3 9 and 3 42 General continues on page 3 42 3 41 Setup Menus Lexicon General continued from page 3 41 Audiol A2 Videol V2 I II ETE General Setup Menu Mode EZAR Setup Navigator rs Parental Lock Off us Bonus Group Auto Disc Menu On Group Playback Single FT Y 1 Move SETUP fiis Setup Menu Mode Determines the mode in which the Setup menu is displayed Select Expert to display the Setup menu in expert mode which includes all available parameters The Setup menu is shown in expert mode at the top of page 3 10 Select Basic to display the Setup menu in basic mode which only includes parameters that are required to configure the most common RT 10 settings When displayed in basic mode the Setup menu also includes a tutorial to describe the highlighted menu item The Setup menu is shown in basic mode at the bottom of page 3 10 Expert Basic Setup Navigator Start Activates and deactivates the Setup Navigator which can be used to configure basic RT 10 settings without navigating through the entire
183. press the remote control ENTER button to return to the General tab General continues on page 3 48 3 47 Setup Menus Lexicon General continued from page 3 47 ENTER Audiol A2 Videol V2 Language Bonus Group Key Number Input a E akaa Audiol A2 Videol V2 EE General Setup Menu Mode Expert Setup Navigator Parental Lock Off us Bonus Group Auto Disc Menu Group Playback Si EDAP Move SETUP fae Bonus Group Start Opens the Bonus Group Key Number Input screen shown above which can be used to enter DVD A bonus group access codes In most cases DVD As include bonus groups that do not require an access code Often these bonus groups can be accessed from the disc menu In other cases DVD As include bonus groups that cannot be accessed without a four number access code which is often located on the disc packaging The Bonus Group parameter is not available for other disc formats or for DVD As that include bonus groups that do not require an access code Note When playback of a DVD A bonus group that requires an access code is attempted the Bonus Group Key Number Input screen automatically opens if the access code has not been entered since the disc was loaded factory default settings were restored or the RT 10 was powered on SETUP ENTER Audiol A2 Video1l V2 Language Bonus Group Key Number Input 21234 Return Exit SETUP Mais To enter DVD A bonus g
184. product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer CART A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn VENTILATION Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to This triangle which appears on your component alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to POWER SOURCES This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company LOCATION The appliance should be installed in a stable location NONUSE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time GROUNDING OR POLARIZATION If this product is equipped with a polariz
185. program list has been created When the desired disc is loaded press the remote control PROGRAM button to open one of the Program tabs shown on page 4 25 When a Program tab opens press the remote control 4 and gt arrows to select the desired Program tab When the desired Program tab is selected press the and v arrows to select the Program Memory parameter 4 24 at the bottom of the Program tab When the Program Memory parameter is selected press the 4 and arrows to move the cursor to the parameter settings menu that appears to the right of the parameter label Then press the and arrows to highlight the Off setting When the Off setting is highlighted press the remote control ENTER button to select this setting All program lists that have been created for the loaded disc will be automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off or factory default settings are restored To create an MP3 program list with the MP3 Navigator 1s Ze Load a CD RW R that includes MP3 tracks When the desired disc is loaded press the remote control MENU button to open an MP3 Navigator similar to the one shown at the top of the next column Current 1 1 MP3 Navigator 1 TRACK1 1 2 TRACK2 2 3 TRACK3 3 4 TRACK4 4 1 10 Folder Track 1 4 a 7 1 FOLDER 1 2 FOLDER 2 3 FOLDER 3 4 FOLDER 4 y 5 FOLDER 5 6 FOLDER 6 Play MENU fae When the MP3 Naviga
186. propriate control screen If an incorrect password has been entered pressing the ENTER button does not close the Confirm Code Number screen Instead the ENTER button grays and the cursor returns to the first character space 3 44 RT 10 Setup Menus 1 2 3 Audiol A2 Videol V2 Language e Parental Lock Password Change EBEN y Return SETUP BS To assign a new password When a user defined password is assigned that password must be entered before a new password can be assigned When the current password is confirmed the Parental Lock Password Change screen opens on the on screen display Note If the assigned password is lost or forgotten factory default settings must be restored to delete the password 5 16 Then a new password can be entered 1 When the Parental Lock Password Change screen opens use the remote control number buttons to enter the new password e When a number is entered the cursor automatically advances to the next character space Press the 4 arrow to return to the previous character space or the arrow to advance to the next character space 929 00008 ENTER Audiol A2 Videol V2 Language Parental Lock Password Change 2 2 3 4 EN Return SETUP Mide 2 When the new password has been entered an ENTER button appears on the on screen display to indicate that pressing the remote control ENTER button will assign the password Level 1
187. r som for eksempel kraftforsterkere Den maksimale romtemperaturen som st r oppgitt i produktbeskrivelsen skal overholdes Apparatet er utstyrt med ventilasjons pninger For at apparatet skal v re p litelig i bruk og ikke veropphetes m disse pningene ikke blokkeres eller tildekkes Stikk aldri noe inn i ventilasjons pningene og pass p at det aldri s les noen form for v ske p apparatet Utgangsplugger fra audioforsterkere skal aldri koples direkte til apparatet Unng brannfare og elektrisk st t ved s rge for at apparatet ikke utsettes for regn eller fuktighet og ikke anvendes i n rheten av vann Apparatet skal ikke brukes hvis det har blitt utsatt for st t er skadet eller blitt v tt eller hvis endringer i ytelsen tyder p at det trenger service Dette apparatet skal kun pnes av fagfolk Hvis dekselet fjernes utsettes man for livsfarlig h yspenning st t Komponenten er merket med denne trekanten som betyr at den tilh rende litteraturen inneholder viktige opplysninger om drift og ved Komponenten er merket med denne trekanten som er en advarsel om at det finnes uisolert farlig spenning inne i kabinettet h y nok til utgj re en fare for elektrisk SVENSKA VIKTIGA S KERHETSF RESKRIFTER Spara dessa f reskrifter f r framtida bruk F lj alla anvisningar och varningar som anges p enheten Anv nd alltid r tt n tsp nning Se tillverkarens bruksanvisningar f r information om
188. r aberta atrav s de pessoal de servico qualificado Removendo coberturas o expor o a voltagens perigosas um risco de choque Esse tri ngulo ques aparece no seu console alerta para instru es importantes de operac o e manutenc o neste manual Esse tri ngulo que aparece no seu console alerta para a presenca de voltagem perigosa e n o isolada no recinto voltagem que pode ser suficiente para constituir viii RT 10 Introductio n DANSK VIGTIG INFORMATION OM SIKKERHED Gem denne vejledning til senere brug F lg alle anvisninger og advarsler p apparatet Apparatet skal altid tilsluttes den korrekte sp nding Der henvises til brugsanvisningen der indeholder specifikationer for str mforsyning Der g res opm rksom p at ved varierende driftsspeendinger kan det blive n dvendigt at bruge andre lednings og eller stiktyper Apparatet m ikke monteres i et kabinet uden ventilation eller lige over andet udstyr der udvikler varme f eks forst rkere Den maksimale omgivelsestemperatur ved drift der st r opf rt i specifikationerne skal overholdes Der er ventilations bninger i kabinettet For at sikre apparatets drift og hindre over phedning m disse bninger ikke blokeres eller tild kkes Stik aldrig noget ind igennem ventilations bningerne og pas p aldrig at spilde nogen form for v ske p apparatet Udgangsstik fra audioforst rkere m aldrig s ttes direkte i apparatet Apparate
189. r is opened standby mode is activated the RT 10 is powered off with the front panel On Off button factory default settings are restored Program lists are automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off with the front panel On Off button factory default settings are restored Program Mode continues on page 4 24 4 23 Playback Controls Lexicon Program Mode continued from page 4 23 Note the following To create a program list Note These instructions can be used to create MP3 program lists with the MP3 Program tab Refer to page 4 27 for instructions to create MP3 program lists with the MP3 Navigator When a disc is loaded press the remote control PROGRAM button to open one of the Program tabs shown at the top of the next page The Program tab that was last modified will open on the on screen display e f a Video CD or SVCD is loaded stop mode must be activated before the PROGRAM button is pressed e If this is a DVD program list proceed to step 2 e If this is not a DVD program list proceed to step 6 When a Program tab opens press the remote control 4 and gt arrows to select the desired Program tab e f this is a DVD V or DVD RW R program list proceed to step 3 e If this is a DVD A program group list proceed to step 5 e If this is a DVD A program track list proceed to step 6 e Program tabs automa
190. r playback Select CD Area to select the standard CD track for playback If the selected track is not available on the loaded SACD the RT 10 will automatically select an alternate track For instance if the SACD Playback parameter is set to CD Area and a non hybrid SACD is loaded the RT 10 will automatically select the stereo track 3 15 Setup Menus Lexicon AUDIO2 Includes parameters that control analog audio output format Parameter Default Setting Possible Settings Audio Out 2 Channel 2 Channel e 5 1 Channel Speaker Setting N A N A Gain Setting Fix e Fix Variable CD Digital Direct Off On Off These parameters only appear when the Setup menu is displayed in expert mode 3 9 and 3 42 amp These settings are recommended when the RT 10 is connected to an MC 12 or MC 8 Digital Controller When no setting is indicated any setting can be selected EN Aucio MEN V2 Language General Audio Out MAA ENE Speaker Setting 85 1 Channel Gain Setting Fix CD Digital Direct Off EBAY Move SETUP Bis Audio Out 2 Channel 5 1 Channel Controls analog audio output format when the RT 10 is using the analog audio output connectors When 2 Channel is selected the RT 10 passes analog audio sources to the Front L R analog audio output connectors When 5 1 Channel is selected the RT 10 passes analog audio sources to the Front L R Surround L R Center and Sub analog a
191. r the remote control SETUP button is pressed while the RT 10 is in stop mode Otherwise the Setup Navigator can be opened from the Setup menu General tab 3 42 Refer to the Setup Navigator prompt description on page 3 4 for more information To open the Setup Navigator 1 Press the Stop button to activate stop mode In some cases the Stop button must be pressed twice in succession to activate stop mode 2 When stop mode is activated press the remote control SETUP button to open the Setup Navigator If the Setup Navigator does not open it must be opened from the Setup menu General tab 3 42 3 2 RT 10 Setup Menus Setup Navigator Prompts The table shown at the right lists all Setup Navigator prompts along with their possible settings and associated Setup menu parameters Note Setup Navigator prompts should be configured while the disc drawer is empty This setting is recommended when the RT 10 is connected to an MC 12 or MC 8 Digital Controller When no setting is indicated any setting can be selected Setup Navigator continues on page 3 4 Setup Navigator Prompt Setup Navigator OSD Language Available Settings e Start English e francais Deutsch Auto Start Off Italiano Espafiol Associated Setup Menu Parameter s Setup Navigator General tab 3 42 OSD Language Language tab 3 36 TV Type Widescreen 16 9 Standard 4 3 TV Scr
192. ral overview of remote control commands that can be used to navigate disc menus In most cases the remote control button must be pressed while the menu is open Otherwise the button executes the command indicated in the Command Matrix that begins on page 2 15 In some cases the command indicated in the Command Matrix can also be used when the menu is open Note the following e The table on pages 4 5 and 4 6 provides a general overview of remote control commands that can be used to navigate disc menus Some commands might not be available for all discs within each format 4 4 RI 10 Playback Controls Disc Menu Command Matrix Button DVD V amp DVD A DVD RW R Video CD amp SVCD MP3 MENU amp When a DVD V is loaded pressing the MENU button Pressing the MENU button opens Perform no function Pressing the MENU button opens TOP MENU opens and closes the disc menu provided the and closes the disc menu and closes the MP3 Navigator loaded disc includes a menu In some cases pressing provided the loaded disc includes provided the loaded disc the TOP MENU button also opens and closes the a menu Pressing the TOP MENU includes an MP3 Navigator menu When a DVD A is loaded pressing the TOP button performs no function Pressing the TOP MENU button MENU button opens and closes the disc top menu performs no function provided the loaded disc includes a top menu The TOP MENU button must be pressed to ope
193. rating Temperature e 5 to 35 C 41 to 95 F Relative Humidity 8596 maximum no condensation Rack Mounting Optional brackets are available for mounting the RT 10 in a standard 19 inch equipment rack Specifications are subject to change without notice DECLARATION OF CONFORMITY Application of Council Directive s 89 336 EEC and 93 68 EEC Standard s to which Conformity is Declared EN55013 1990 A12 1994 A13 1996 A14 1999 EN55020 1994 A11 1996 A12 1999 A13 1999 A14 1999 EN60065 1998 EN60825 1 1994 A11 EN61000 3 2 1995 A1 1998 A2 1998 A14 2000 EN61000 3 3 1995 Manufacturer Lexicon Inc 3 Oak Park Bedford MA 01730 1413 USA The equipment identified here conforms to the Directive s and Standard s specified above Type of Equipment Disc Player Model Lexicon RT 10 Date February 2003 Lexicon Inc Vice President of Engineering 3 Oak Park Bedford MA 01730 1413 USA Tel 781 280 0300 Fax 781 280 0490 A 3 Appendix Lexicon SETUP MENU SCREENS Setup Navigator Screens Audiol A2 Videol V2 Language Setup Navigator Setup Navigator Auto Start Off Setup using the Setup Navigator fana Move EIS dil SETUP Metis Audiol A2 Videol V2 Language Setup VENIRET Amp Connection Analog Jacks EA Channel Not Connected 2 channel jacks for L R r Dae EIS dili SETUP etis Audiol A2 Videol V2 Language Setup NEVER Amp Connection Surround Speakers
194. re available on S PDIF or analog audio output connectors Three digital audio output connectors one S PDIF coaxial one S PDIF optical and one AES EBU allow for external decoding and processing of Dolby Digital DTS and PCM Linear or Packed sources Alternatively built in 24 bit 192kHz D A converters on all six analog audio output connectors allow high bandwidth formats such as DVD A and SACD to deliver smooth expansive analog sound without sample rate conversion and digital word length reduction Setup is simplified with color on screen display menus that can be customized for the desired level of control The Setup Navigator provides step by step guidance through the process of configuring minimum settings When activated it presents a series of questions that when answered allow the RT 10 to implement the correct audio video and language settings The Setup menu provides access to more advanced controls Available in basic and expert display modes the Setup menu can be customized to include controls that are required to configure the most common settings or to include all controls that are available In addition the RT 10 allows the creation of up to five shortcuts which provide convenient access to frequently adjusted controls without navigating through the entire Setup menu Built to Lexicon standards the RT 10 represents a solid investment that promises to complement the finest home theaters With its extensive compati
195. re deactivated pressing the VIDEO ON OFF button activates these connectors allowing video signals to pass to the associated component When these connectors are activated pressing the VIDEO ON OFF button deactivates these connectors preventing video signals from passing to the associated component The V OFF indicator 2 7 appears on the front panel display to indicate that the video output connectors are deactivated VIDEO 3 ON OFF OPEN 4 CLOSE 5 CLEAR ee 6 10 0000 6000 Opens and closes the disc drawer 2 3 When the disc drawer is closed pressing the Open Close button opens the disc drawer When the disc drawer is open pressing the Open Close button closes the disc drawer The disc drawer can also be closed with a gentle press against the front of the disc drawer Deletes entries when search modes and certain playback modes are activated Refer to Section 4 for more information When a disc is loaded and the disc menu is closed pressing a number button activates playback at the selected title chapter group or track number When a disc is loaded and the disc menu is open pressing a number button selects the corresponding menu item 4 5 and 4 6 In some cases the number buttons can also be used to enter playback mode values Section 4 To enter values 10 and above press the 10 button once for numbers in the teens twice for numbers in the twenties and so on Then press a number button 0 to 9 to enter the
196. rogram list has been created program mode also activates program playback The table on page 4 12 indicates the program playback modes available for each disc format e A program list is a user defined playback order of titles chapters groups or tracks The table on the next page indicates the program lists available for each disc format e When playback of a program chapter or program track list is activated playback of a non programmed chapter or track might activate while the RT 10 searches for the next programmed chapter or track To navigate Program tabs Button Command Number Buttons Insert the corresponding value in the selected field Refer to page 2 15 for instructions to enter values 10 and above Note the following e Program lists cannot contain values 100 and above or values that are not included on the loaded disc For instance a program title list cannot include a value of 5 if the loaded disc does not include title 5 e When a new value is inserted no previously inserted values are replaced or deleted The new value is inserted in the selected field moving all previously inserted values in and to the right of the selected field one field to the right All previously inserted values to the left of the selected field are not affected e The program list must include at least one blank field before a new value can be inserted CLEAR Deletes the value in the selected field moving all previously insert
197. roup access codes 1 When the Bonus Group Key Number Input screen opens use the remote control number buttons to enter the bonus group access code e When a number is entered the cursor automatically advances to the next character space Press the 4 arrow to return to the previous character space or the arrow to advance to the next character space When the access code has been entered an ENTER button appears on the on screen display to indicate that pressing the remote control ENTER button will confirm the access code 3 48 RT 10 Setup Menus Audiol A2 Video1 V2 I II ETE General Audiol A2 Videol V2 EEN General Setup Menu Mode Expert Setup Menu Mode Expert Setup Navigator Setup Navigator Parental Lock Off us Parental Lock Off us Bonus Group Bonus Group Auto Disc Menu I y Auto Disc Menu On Group EAS oli Group Playback EFI Single EBAY Move SETUP Mtis aU Move SETUP Mis Auto Disc Menu On Off Group Playback All Single Enables and disables automatic opening of DVD menus and top menus This parameter has no effect on other disc formats or on DVDs that do not include menus or top menus When On is selected DVD menus and top menus automatically open on the on screen display when a DVD that includes menus or top menus is loaded When Off is selected DVD menus and top menus do not automatically open on the on screen display when a DVD that includes menus or top menus is loaded In eith
198. rrently playing title and chapter 3 Indicates the elapsed playback time of the currently playing title minutes seconds Indicates the display bar format 5 Indicates the elapsed and total playback time of the currently playing chapter 4 32 RT 10 Playback Controls currently playing chapter 1 2 3 Play E 0 40 o Play 1 8 0 15 O Play 2 1 0 15 Track seHovu Sus Track TRACK NAME Track 7 28 7 43 4 5 1 2 3 Play 5 15 0 40 Play 2 3 0 15 Q Play 2 1 0 15 All 52 14 69 12 Folder FOLDER NAME Tr Rate 320kbps 4 5 Display Bar C DVD V Display Bar D DVD V No Description No Description 1 Indicates whether playback or pause mode is activated Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing title and Indicates the numbers of the currently playing title and chapter chapter 3 Indicates the elapsed playback time of the currently Indicates the elapsed playback time of the currently playing title minutes seconds playing title minutes seconds Indicates the display bar format Indicates the display bar format 5 Indicates the remaining and total playback time of the Indicates the current transmission rate Display Bars continues on page 4 34 4 33 Playback Controls Lexicon Display Bars continued from page 4 33 Display Bar G DVD A No Description The letters and numbers in the display bar illustrati
199. rview 2 2 to 2 5 Function Memory Mode 2 18 3 50 A 12 tab G Gain Setting Parameter 3 21 to 3 24 Screens A 7 ills Gamma Parameter 3 31 3 32 General Tab 3 41 to 3 49 A 11 ills A 12 ills A 13 ills A 14 ills Group Playback Parameter 3 41 3 49 Indicator 2 6 H Highlights RT 10 1 3 Hue Parameter 3 31 3 32 l Icons Playback 4 2 5 4 Indicators Front Panel Display 2 6 to 2 8 Inspection Instructions Unpacking amp xi Installation Considerations 1 3 to 1 4 Worksheet A 17 to A 18 IR IN Connector 2 11 A 3 L L R Parameter 3 18 3 22 Indicator 2 7 LAST MEMO Button 2 18 4 13 Last Memory Playback 2 18 4 13 Linear PCM Out Parameter 3 11 3 13 to 3 14 L continued Language s Tab 3 36 to 3 41 A 10 ills A 14 to A 15 Table of A 14 to A 15 Last Memory Playback 4 12 4 13 Level Control Security 3 42 3 45 to 3 46 A 12 screens Limited Warranty Inside Back Cover Linear PCM Out Parameter 3 3 3 11 3 13 to 3 14 Loading Discs 4 2 to 4 3 LS Parameter 3 18 3 22 Luminance Noise Reduction YNR Parameter 3 30 3 31 M Maintenance Disc 5 16 RT 10 5 15 MC 12 Digital Controller 2 11 3 3 3 7 3 11 3 16 3 18 3 22 5 6 5 10 MC 8 Digital Controller 2 11 3 3 3 7 3 11 3 16 3 18 3 22 5 6 5 10 Memory Parameter 3 31 3 32 to 3 33 MENU Button 2 16 4 5 Menus Navigating Disc 4 3 to 4 6 MNR Mosquito Noise Reduction Parameter
200. s press the number 1 button the number 6 button the number 1 button then the number 6 button e Press the remote control CLEAR button to delete an incorrect search value e To deactivate search mode press the SEARCH button until the search bar closes Search Mode continues on page 4 30 4 29 Playback Controls Lexicon Search Mode continued from page 4 29 5 When the desired search value is entered press the Play button or the remote control ENTER button to activate playback at the selected playback time e If a valid search value was entered playback will activate at the selected title chapter group track folder playback time or browsable picture e f an invalid search value was entered the search bar will close without activating playback DISPLAY MODE SEARCH e The remote control DISPLAY button can be used to activate display mode which opens an on screen display screen or bar that provides information about the loaded disc e Display screens are available when stop or resume mode is activated Display bars are available when playback or pause mode is activated e The display screens descriptions that begin in the next column indicate the display screens available for each disc format e The display bars descriptions that begin on page 4 32 indicate the display bars available for each disc format Display Screens The letters in the display screen illustrations shown at the top o
201. s When Off is selected the Lexicon screen saver does not appear on the on screen display Note Still frame images displayed on CRT display devices for long periods of time can burn in or create ghost images on the screen When the RT 10 is connected to a CRT display device it is recommended to set the Screen Saver parameter to On to prevent the appearance of ghost images on the screen 3 28 RT 10 Setup Menus UTERINA Video2 Language General Video Adjust Background Miei Video Adjust iBlack The loaded disc might cause the Video Adjust Still Playback Auto bar to exceed on screen display margins If this On Screen Display On occurs close the Video Adjust bar and remove Angle Indicator On the loaded disc from the disc drawer Then open the Video Adjust bar again EDAP Move SETUP BS VIDEO2 Background Gray Black Includes parameters that control video output format and on screen display appearance Parameter Default Setting Possible Settings Background Gray Gray Black Video Adjust N A N A Still Picture Auto Field Frame Auto On Screen Display On On Off Angle Indicator Off On Off These parameters only appear when the Setup menu is displayed in expert mode 3 9 and 3 42 Determines the background color of Setup menu screens when resume or stop mode is activated The video output signal appears behind Setup menu screens when playback or pause m
202. s Group Auto Disc Menu Country Code Group Playback Single EBAY Move ENTER SIEC SETUP a Videol V2 Language Parental Lock Level Change bhoattbhtth tb Level 12 34 5 6 7 O Return SETUP Maior d SETUP la Audiol A2 Videol V2 Language Parental Lock Confirm Code Number a 8 y Return SETUP je Audiol A2 Videol V2 Language Parental Lock Password Change 2 2 3 4 Sy LX IBS SETUP Mais Audiol A2 Videol V2 Language Level Confirm Code Number a B8B y Return SETUP Mais Audiol A2 Videol V2 Language Parental Lock Confirm Code Number A ENTER Return SETUP Maxis Audiol A2 Videol V2 Language Level Confirm Code Number ENE Return SETUP Mais A 12 RT 10 Appendix Parental Lock Country Code Setup Menu Mode Expert Screens Setup Navigator Parental Lock I Bonus Group EE DW Country Code Group Playback Single Audiol A2 Videol V2 EINEN General BT Move EISE di SETUP s Audiol A2 Video1 V2 Language Country Code List of Codes Code 0 2 2 1 4 9 Return ENTER EEC SETUP da Bonus Group Audiol A2 Video1 V2 Language Screens Bonus Group Key Number Input a 8 y Function Memory Menu Function Memory Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Audiol A2 Video1 V2 Language Country Code Confirm Code Number a 8 y Return
203. scription No Description 1 Indicates whether playback or pause mode is activated 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing track 2 Indicates the numbers of the currently playing folder and the total number of tracks on the loaded disc and the total number of folders on the loaded disc 3 Indicates the elapsed playback time of the currently 3 Indicates the elapsed playback time of the currently playing track playing track 4 Indicates the display bar format Indicates the display bar format 5 Indicates the total playback time of the loaded disc Indicates the name of the currently playing folder Display Bar J MP3 Display Menu L MP3 No Description No Description 1 Indicates whether playback or pause mode is activated 1 Indicates whether playback or pause mode is activated 2 Indicates the numbers of the currently playing track 2 Indicates the numbers of the currently playing folder and the total number of tracks in the currently playing and track folder 3 Indicates the elapsed playback time of the currently 3 Indicates the elapsed playback time of the currently playing track playing track Indicates the display bar format 4 Indicates the display bar format Indicates the remaining and total playback time of the 5 Indicates the name of the currently playing track currently playing track Display Bars continues on page 4 36 Playback Controls Lexicon Disp
204. se reduction applied to the C component chrominance present in video signals MNR Mosquito Noise Reduction Controls the amount of noise reduction applied to mosquito dot crawl noise present in video signals which produces video artifacts around picture edges as a result of MPEG compression off to max BNR Black Noise Reduction Controls the amount of noise reduction applied to black noise present in video signals off to max soft to fine Sharpness High Controls the sharpness of high frequency finely detailed video signals soft to fine Sharpness Mid Controls the sharpness of mid frequency less detailed video sig nals Detail off to max Controls the sharpness of details around picture edges White Level min to max Controls the white level of video signals Black Level min to max Controls the black level of video signals Black Setup O IRE 7 5 IRE Corrects floating black color Settings are based on International Radio Engineer IRE units O IRE is equivalent to 0 286V and 7 5 IRE is equivalent to 0 339V 3 30 RT 10 Setup Menus Default Setting Parameter TV CRT PDP Professional Possible Settings Pure Cinema Auto1 Auto1 Auto1 Auto1 Auto2 On Off YNR 4 4 2 off to max 8 increments CNR 4 4 2 off to max 8 increments MNR 0 0 0 off to max 8 increments BNR 0 0 0 off to max 8 increments Sharpness High 4 2 4 soft to f
205. setting when the subwoofer distance falls outside the SW parameter range This should not affect surround cohesion Gain Setting Fix Variable Controls front center surround and subwoofer channel output levels when the RT 10 is using the 5 1 channel analog audio output connectors This parameter setting has no effect when the RT 10 is using the 2 channel analog audio output connectors or digital audio output connector Test Tone TUS ENTER EEC SETUP a Return Selecting Fix configures all channels to pass audio at its relative recorded volume level Selecting Variable opens the Gain Setting screens which can be used to adjust output levels within a 6 0 to 6 0dB range Note the following e The Gain Setting parameter setting has no effect when the CD Digital Direct parameter 3 24 is set to On and a CD source is present e When Variable is selected output levels can be calibrated for the analog audio output connectors Variable output levels do not affect the digital audio output connector e In some cases variable output levels might sound quieter than fixed output levels Setting Variable Output Levels The Gain Setting and Test Tone screens shown above can be used to calibrate variable output levels for the front center surround and subwoofer speakers Audio2 continues on page 3 22 3 21 Setup Menus Lexicon Audio2 continued from page 3 21 Parometer Default P
206. shortcut 1 If the Setup menu is closed proceed to step 2 If the Setup menu is open press the remote control SETUP button to close the Setup menu Setup menu shortcuts cannot be used when the Setup menu is open When the Setup menu is closed press the remote control FMEMO button to open the Function Memory tab shown above The Function Memory tab lists all Setup menu parameters for which a shortcut has been created When the Function Memory tab opens press the remote control a and v arrows to highlight the desired shortcut Then press the remote control ENTER button to select that shortcut The Setup menu will open on the on screen display highlighting the corresponding parameter 3 50 RT 10 Setup Menus ADVANCED SETUP MENU ENTER ENTER ENTER The Advanced Setup menu can be used to configure advanced RT 10 mode settings for CD SACD and MP3 display mode standby mode and remote control command mode Unlike the Setup menu the Advanced Setup menu opens on the front panel display which provides one line viewing of parameters and settings as shown above 909 99 09 Parameter Default Setting Possible Settings DISP_MODE DISP_OFF DISP OFF DISP ON AUTO P ON 30MIN OFF ON 30MIN REMOT CODE DVD 2 DVD 1 DVD 2 Advanced Setup Menu continues on page 3 52 3 51 Setup Menus Lexicon Advanced Setup Menu continued from page 3 51 To open the Adv
207. sible connectors However certain connectors are not included on some versions These instances are noted in the rear panel connector descriptions that begin below Region Code Indicator Indicates the RT 10 region code which differs from version to version depending on the region of purchase All DVD Vs are also marked with a region code which is often located on the disc packaging The RT 10 is compatible with discs marked with this same region code or with the ALL region code The RT 10 is not compatible with discs marked with other region codes AC Input Connector Provides power to the RT 10 through the supplied power cord 2 wire 10 amp IEC 320 The supplied power cord features the appropriate male end connector for the region of purchase 2 8 RT 10 Basic Operation Claims of U S Patent Nos 4 631 603 4 577 216 4 819 098 and 4 907 093 licensed for limited viewing uses only COMPONENT VIDEO CAUTION Damaged power cords can cause fire or electric shock Please observe the following when handling power cords Handle power cords at the plug Never disconnect power cords by pulling on the cord Never touch power cords with wet hands as this could cause short circuit or electric shock Protect power cords from being pinched or walked on particularly at plugs convenience receptacles and points of connection with the unit Never tie knots in power cords or tie power cords together Exa
208. sing the 4 button skips to the beginning of the next chapter or track Subsequent presses also skip to the beginning of the next chapter or track When the RT 10 loads the selection playback or pause mode reactivates from the beginning of the selected chapter or track Pressing and holding the W button scans through the loaded disc in forward direction When the button is released playback or pause mode reactivates at the current playback time The front panel I button scans at one speed The remote control button scans at three speeds When the end of the disc is reached pressing the I button performs no function Pause mode activates from the beginning of the loaded disc even if the button is pressed and held Basic Operation Lexicon The numbers in the RT 10 front panel display illustration shown above correspond to the numbered items that begin below 4 Character Display Indicates that a Video CD is loaded Provides at a glance viewing of status information about the RT 10 and the 5 loaded disc 2 DvD Indicates that a DVD V or DVD RW R is loaded 3 AUDIO Indicates that a DVD A is loaded 2 6 RT 10 Basic Operation 11 TRE Indicates that the second character on the character display previous page is a track number 12 R Indicates that the last three characters on the character display number 1 represent the remaining playback time 13 TO
209. speres Return SETUP Me Password continued To confirm the user defined password When a user defined password is assigned that password must be entered before the RT 10 will activate playback mode when a disc encoded with a user defined security level is loaded The user defined password must also be entered before the Level and Country Code controls can be adjusted Note If the assigned password is lost or forgotten factory default settings must be restored to delete the password 5 16 Then a new password can be entered 1 When the Confirm Code Number screen opens use the remote control number buttons to enter the assigned password Audiol A2 Video1 V2 Language Parental Lock Confirm Code Number aalas ENTER Return SETUP Ma When a number is entered the cursor automatically advances to the next character space Press the 4 arrow to return to the previous character space or the arrow to advance to the next character space The number entered in the selected character space appears as an actual number Numbers entered in unselected character spaces appear as asterisks as shown above When the assigned password has been entered an ENTER button appears on the on screen display to indicate that pressing the remote control ENTER button will confirm the password If the assigned password has been entered pressing the ENTER button closes the Confirm Code Number screen and opens the ap
210. ss the Play button or the remote control ENTER button to activate program playback SEARCH MODE SEARCH e The remote control SEARCH button can be used to activate search mode which activates playback of a specific title chapter group track folder times frame or page on the loaded disc The table on page 4 12 indicates the search modes available for each disc format e Most search modes are available whether playback stop resume or pause mode is activated However the Time and Frame Time search modes are not available unless playback or pause mode is activated Search Modes Title Activates playback of the first chapter in the selected title Chapter Activates playback of the selected chapter in the currently playing title Group Activates playback of the first track in the selected group Track e When a DVD A is loaded track search mode activates playback of the selected track in the currently playing group e When an MP3 is loaded track search mode activates playback of the selected track in the currently playing folder e When another disc format is loaded track search mode activates playback of the selected track Folder Activates playback of the first track in the selected folder Time Activates playback at the selected playback time minutes seconds in the currently playing title chapter group track or folder This search mode is not available unless playback or pause mode is activated
211. st bars exceed the on screen display margins 1 In some cases the loaded disc might cause the Video Adjust bar to exceed on screen display margins If this occurs close the Video Adjust bar and remove the loaded disc from the disc drawer Then open the Video Adjust bar again Previewed Video Adjust bank settings do not disappear 1 Select a new Video Adjust bank 3 34 to cancel the previewed settings The selected bank settings will be automatically applied to the picture on the associated display device screen Press the remote control VIDEO ADJ button 2 18 to close the Video Adjust bar or screen Subtitles do not appear on the on screen display 1 Make sure a disc recorded with subtitles is loaded Subtitles are not available for discs that are not recorded with subtitles When the Level control is used to assign a security level the Country Code control is not available The password has been lost or forgotten 1 Restore factory default settings 5 16 Unfortunately restoring factory default settings also resets all Setup and Advanced Setup menu parameters to their factory default settings and deletes all Setup menu shortcuts bookmarks preferred disc settings and program lists Setup menu shortcuts 3 50 cannot be created 1 Make sure a Setup menu shortcut can be created for the selected parameter Shortcuts cannot be created for the following parameters Linear PCM Out SACD Playback TV Scr
212. t RT 10 Introduction Unpacking and Inspection p After unpacking the unit save all packing materials in case the unit ever needs to be shipped Thoroughly inspect the modules and packing materials for signs of damage Report any damage to the carrier at once report equipment malfunction to the dealer Auspacken und berpr fung Bewahren Sie nach dem Auspacken des Ger ts das Verpackungsmaterial f r den Fall auf dass Sie das Ger t wieder versenden m ssen berpr fen Sie die Module und die Verpackung sorgf ltig auf Anzeichen von Besch digung Etwaige Sch den sind dem Transporteur unverz glich anzuzeigen Funktionsst rungen sind dem zust ndigen H ndler zu melden Desembalaje e inspecci n Despu s de desembalar la unidad guarde todos los materiales de embalaje por si alguna vez transportar la unidad Inspeccione con atenci n los m dulos y los materiales de embalaje para comprobar que no muestren desperfectos Informe inmediatamente de cualquier desperfecto al transportista informe de cualquier problema de funcionamiento del equipo a su distribuidor Contenu de l emballage et inspection Apr s avoir ouvert l emballage conservez le pour tout retour Inspectez avec soin les modules et les mat riaux d emballage pour tout signe de dommage Veuillez rapporter imm diatement les dommages aupr s du transporteur Les dysfonctionnements du mat riel doivent tre signal s votre revendeur Disimballagg
213. t DTS encoded CDs from outputting digital noise Note The Gain Setting parameter setting has no effect when the CD Digital Direct parameter is set to On and a CD source is present VIDEO1 Includes parameters that control video output format as well as the Time and Frame Time search modes and the Lexicon screen saver Parameter Default Setting Possible Settings TV Screen 16 9 Wide 4 3 Letter Box e 4 3 Pan amp Scan 16 9 Wide 16 9 Compressed Component Video Interlace Progressive e Interlace Video Out Video Video e S Video RGB S Video Out S2 e S1 e S2 Frame Search Off On e Off Screen Saver Off On e Off These parameters only appear when the Setup menu is displayed in expert mode 3 9 and 3 42 3 24 RT 10 Setup Menus TV Screen Refer to the table on the previous page Controls the appearance of the picture on the associated display device screen formatting the aspect ratio of the video output format to match the aspect ratio of the display device Aspect ratios which refer to width relative to height differ among video output formats and display devices A 16 9 aspect ratio is almost twice as wide as high and a 4 3 aspect ratio is almost square INT ANNA Videol NIE NECE El TV Screen PERMAN Component Video 14 3 Pan amp Scan Video Out 16 9 Wide S Video Out E16 9 Compressed Frame Search Off Screen Saver
214. t from the primary listening position Place the SPL meter at the approximate spot where the listener s head will be during listening To set variable output levels When the Gain Setting screen opens press the remote control gt arrow to open the Test Tone screen shown on page 3 21 When the Test Tone screen opens press the and arrows to highlight the desired parameter e Test Tone parameters cannot be adjusted when the disc drawer is open the Audio Out parameter or Setup Navigator Analog Jacks prompt is set to 2 Channel or the RT 10 is in playback pause or resume mode The RT 10 must be in stop mode When the desired parameter is highlighted press the 4 and arrows to cycle through the Auto On and Off settings e Select Auto to set all test tone parameters to Auto Test tones will pass through each channel when the associated Gain Setting screen parameter is highlighted e Select On to activate a test tone for the associated channel A test tone will pass through the associated channel when the corresponding Gain Setting screen parameter is highlighted e Select Off to deactivate a test tone for the associated channel No test tone will pass through the associated channel Repeat steps 2 and 3 until all desired test tones have been activated or deactivated When all desired test tones have been activated press the 4 and arrows to highlight the Test Tone option at the top of the screen Then press the 4
215. t m ikke uds ttes for regn eller fugt og m ikke bruges i n rheden af vand for at undg risiko for elektrisk st d og brand Apparatet m aldrig bruges hvis det er blevet st dt beskadiget eller v dt eller hvis ndringer i ydelsen tyder p at det tr nger til eftersyn Dette apparat m kun bnes af fagfolk Hvis d kslet tages af uds ttes man for livsfarlig h jsp nding h j nok til at give elektrisk st d Denne maerkat p komponenten advarer om uisoleret farlig speending i apparatet i den tilh rende litteratur i Denne maerkat p komponenten advarer om vigtig driftsog vedligeholdsinformation SUOMI TARKEITA TURVALLISUUSOHJEITA S ilyt nama ohjeet tulevaa k ytt varten Seuraa kaikkia yksikk n merkittyj ohjeita ja varoituksia K yt aina oikeaa verkkoj nnitett Tehovaatimukset selvi v t valmistajan k ytt ohjeista Huomaa ett eri k ytt j nnitteet saattavat vaatia toisenlaisen verkkojohdon ja tai pistokkeen k yt n l asenna yksikk telineeseen jossa ei ole tuuletusta tai v litt m sti l mp tuottavien laitteiden esim tehovahvistimien yl puolelle Ymp rist n l mp tila k yt ss ei saa ylitt tuotespesifikaation maksimil mp tilaa Kotelo on varustettu tuuletusreiill ja aukoilla Luotettavan toiminnan varmistamiseksi ja ylil mpenemisen v ltt miseksi n it aukkoja ei saa sulkea tai peitt Mit n esineit ei saa ty nt tuuletus
216. t not allow playback of CD RW Rs DIGITAL AUDIO e 5 inch 12cm or 3 inch 8cm discs recorded with a personal computer if incorrect MS d Tm bi A eee software application settings were used during hen ISES TECOUOE In MIES EP Or AURO SO SORTIE the recording process even if the disc was DIGITAL AUDIO e Discs that include MP3 audio tracks that meet the recorded in a compatible format Refer to the requirements outlined in the table on the next page e Discs that are unfinalized although some time information i e playback time will not display software application documentation for more information When a copy once protected disc is loaded the message COPY PROTECT PROGRAM UNPLAYABLE appears on the on screen and front panel displays 1 6 RT 10 Getting Started Format Logo Disc Compatibility Requirements Additional Information Video CD gompaer The RT 10 supports Discs are divided into tracks e 5 inch 12cm or 3 inch 8cm discs e MPEG 1 digital audio and MPEG 2 video SVCD dise The RT 10 supports Discs are divided into tracks e 5 inch 12cm or 3 inch 8cm discs e PCM Linear digital audio MP3 ApS The RT 10 supports The RT 10 supports MP3 tracks encoded at less EE e MP3 tracks recorded on a 5 inch 12cm or 3 inch than a 28kBps However sound quality will be E 8cm CD RW R that is ISO 9660 compatible impaired when playback of these tracks is in The disc can be finalized or unfinalized although
217. t prevent recording or produce video artifacts in the picture when the RT 10 is connected to a VCR or A V selector nterference is present in the video output Make sure the RT 10 is not positioned near unshielded TV or FM antennas cable TV decoders and other RF emitting devices that might cause interference Replace unshielded cables with shielded cables whenever possible Still frame images shake T Set the Still Picture parameter 3 35 to Field When this parameter is set to Field the RT 10 produces tight stable and generally shake free still frame images An icon appears on the on screen display 1 The icon shown at the right appears on the on screen display when the RT 10 does not allow the selected command The icon shown at the right appears on the on screen display when the loaded disc does not allow the selected command The icon shown at the right appears on the on screen display when a Setup menu parameter that is exclusive to DVD formats is adjusted while another disc format is loaded These adjustments will take effect the next time a DVD is loaded When the Setup menu is open the icon shown at the right appears next to parameters for which Setup menu shortcuts 3 50 have been created When the MP3 Navigator 4 4 and 4 27 is open the icon shown at the right appears next to MP3 tracks that have been added to the MP3 program list rm j eP AUDIO OUTPUT ISSUES The RT 10 is powered on but t
218. teristics such as those shown below All discs must align with the circular guide inside the disc drawer Make sure a compatible disc format is loaded 1 5 If a DVD V is loaded make sure the RT 10 region code is compatible with the DVD V region code The map shown on page 1 4 indicates DVD V region codes for all areas of the world All DVD Vs are marked with a region code which is often located on the disc packaging The RT 10 rear panel is also marked with a region code 2 8 The RT 10 is compatible with discs marked with this same region code or with the ALL region code The RT 10 is not compatible with discs marked with other region codes Clean the loaded disc 5 16 Condensation might have formed on the RT 10 lens 1 4 If this occurs allow at least 1 hour for condensation to evaporate before attempting to load a disc Playback Issues continues on page 5 8 5 7 Troubleshooting amp Maintenance Lexicon Playback Issues continued from page 5 7 Playback will not activate 1 2 Make sure a compatible disc format is loaded 1 5 Make sure the disc is properly loaded 4 2 Load single sided discs with the label side facing upward and double sided discs with the side intended for playback facing downward All discs must align with the circular guide inside the disc drawer Close the disc menu if applicable Pressing the Play button might not activate playback when the disc menu is open on the on
219. ters groups or tracks even if a different playback mode i e random playback was activated before the switch When playback is activated the remote control and buttons might stop functioning To restore functionality press the Stop button to activate stop mode In some cases the Stop button must be pressed twice in succession to activate stop mode Then press the Play button to reactivate playback The RT 10 might require a few seconds to activate playback of an MP3 track that is included in a complex MP3 file structure When this occurs the message Please wait a moment appears on the on screen display The RT 10 does not allow playback of incompatible MP3 tracks 1 7 When the MP3 Navigator is open S and an incompatible MP3 track is selected the icon shown at the right appears on the on screen display When the MP3 Navigator is closed and an incompatible MP3 track is selected the message UNPLAYABLE MP3 FORMAT appears on the on screen display When playback of an MP3 track is activated the name of the track appears on the front panel display for the first 5 seconds of playback To activate playback Press the Play button In some cases the remote control number buttons can also be used to activate playback of a specific title chapter group or track Playback Controls Lexicon Playback Modes continued from page 4 11 Playback Mode UD ayy DVD A SACD or V
220. tically close a few seconds after the last command is received If this occurs all program list modifications that have not been previously stored will be deleted e If the Program tab automatically closes when the Program Memory parameter is set to Off all program list modifications that have not been previously stored will be deleted It is recommended to set the Program Memory parameter to On to ensure that all program list modifications will be stored When the desired Program tab is selected press the and y arrows to select the Program Memory parameter at the bottom of the Program tab Program Memory On Off Determines DVD V and DVD RW R program list storage This parameter is not available for other disc formats When On is selected program lists for the loaded disc are stored until factory default settings are restored When Off is selected program lists for the loaded disc are automatically deleted when the disc drawer is opened standby mode is activated the RT 10 is powered off or factory default settings are restored The Program Memory parameter setting applies to all program lists that have been created for the loaded disc In other words the Program Memory parameter cannot be set to On for a program title list and to Off for a program chapter list 4 24 RI 10 Playback Controls Program Tabs roll MO oa Program Title Program Chapter Jet 1 1 Current Title 1 Chapter 1 Title 1 Chapter 1 35
221. tings might not have been stored if the RT 10 was powered off or standby mode was activated before the Setup menu was closed If this occurs all parameters are reset to their previously stored setting All Setup menu parameters are reset to their factory default setting when a power failure such as a power cord disconnect occurs or factory default settings are restored Note Whenever possible power the RT 10 off or activate standby mode instead of disconnecting the power cord Setup menu parameter settings seem ineffective 1 Certain Setup menu parameter settings have no effect on some disc formats 3 11 If playback is activated press the Stop button to activate stop mode Some Setup menu parameters can be adjusted when playback is activated even though the setting does not take effect until stop mode is activated Speaker settings seem ineffective 1 Certain speaker settings have no effect on some disc formats For instance speaker size settings 3 19 have no effect on DVD As and speaker distance settings 3 20 have no effect on SACDs Make sure the RT 10 and all associated components are configured with the correct speaker settings RT 10 speaker settings do not need to be configured when the RT 10 is connected to an associated component such as the MC 12 Digital Controller which allows speaker settings to be configured for analog audio sources The associated component must not be using analog audio con
222. tion of Conformity o ooooooocoooco o oo A 3 Setup Menu Scre ns sse ee kd em ae dos RR RS en A 4 Table of Languages amp Language Codes A 14 Table of Country Codes 0 eee eee o A 16 Installation Worksheet llle A 17 Notes Inside Back Cover Introduction Lexicon ENGLISH DEUTSCH IMPORTANT SAFETY INSTRUCTIONS Save these instructions for later use Follow all instructions and warnings marked on the unit Always use with the correct line voltage Refer to the manufacturer s operating instructions for power requirements Be advised that different operating voltages may require the use of a different line cord and or attachment plug Do not install the unit in an unventilated rack or directly above heat producing equipment such as power amplifiers Observe the maximum ambient operating temperature listed in the product specification Slots and openings on the case are provided for ventilation to ensure reliable operation and prevent it from overheating these openings must not be blocked or covered Never push objects of any kind through any of the ventilation slots Never spill liquid of any kind on the unit Never attach audio power amplifier outputs directly to any of the unit s connectors To prevent shock or fire hazard do not expose the unit to rain or moisture or operate it where it will be exposed to water Do not attempt to operate the unit if it has
223. tiple camera angles is in progress Note The remote control ANGLE button can be used to select the desired camera angle for scenes recorded from multiple camera angles 4 9 3 35 Setup Menus Lexicon LANGUAGE Includes parameters that can be used to determine RT 10 on screen display menu disc menu subtitle and audio language Parameter OSD Language Default Setting English Possible Settings English francais Deutsch Italiano Espafiol Audio Language English Refer to the table that begins on page A 14 Subtitle Language Auto Language English On Refer to the table that begins on page A 14 On Off DVD Language Subtitle Display On w Subtitle Language Refer to the table that begins on page A 14 On Off Assist Subtitle Subtitle Off These parameters only appear when the Setup menu is displayed in expert mode 3 9 and 3 42 Selected Subtitle With Audio Selected Subtitle Audiol A2 Videol V2 Language emi OSD Language MAIS Audio Language iifrancais Subtitle Language iDeutsch Auto Language lHtaliano DVD Language IEspanol Subtitle Display On Subtitle Off Selected Subtitle EBAY Move SETUP BS OSD Language Determines the language in which RT 10 on screen display menus appear The OSD Language parameter is associated with the Setup Navigator OSD Language prompt 3 4 English francais D
224. to 8 off country code Assigns a user defined security level requiring the password before the RT 10 will activate playback mode when a disc encoded with a user defined security level is loaded The Level control has no effect when a disc that is not encoded with a security level is loaded Select a number within the 1 to 8 range to assign a security level The 1 setting represents the highest level of security and the 8 setting represents the lowest level of security When a security level is assigned the RT 10 requires the user defined password before activating playback mode when a disc encoded with a higher security level is loaded General continues on page 3 46 3 45 Setup Menus Lexicon General continued from page 3 45 Audiol A2 Videol V2 Language Setup Menu Mode Expert Setup Navigator Parental Lock I Bonus Group Auto Disc Menu Country Code Group Playback Single ENTER GEI EBAY Move SETUP Medis Level continued Select off to use the Country Code control to determine security level When off is selected the RT 10 requires the user defined password before activating playback mode when a disc encoded with an incompatible country code is loaded The Country Code parameter has no effect on discs that are not encoded with a country code regardless of the Level control setting To assign a security level When the Level control is selected the assigned password must be entered
225. to the numbered items in the Command Matrix that begins on page 2 15 The Command Matrix describes the commands remote control buttons execute OPERATION CONSIDERATIONS The bulleted items that begin below describe factors that can improve or impede remote control operation It is recommended to observe these items as well as the battery installation instructions on page 1 9 before operating the remote control Note the following e If the RT 10 is not using the IR IN connector the remote control must be in line of sight with the front panel display remote control sensor Eliminate obstructions between the remote control and the remote control sensor The remote control might become unreliable if strong sunlight or fluorescent light is shining on the remote control sensor e For optimal performance position the remote control at a 30 degree angle no more than 17 feet 5m from the RT 10 as shown below If the RT 10 is placed inside a glass cabinet smoked glass will reduce the remote control range y 3004 ace 17 feet 5m e Remote controllers for different components can interfere with one another It is recommended to avoid using remote controls for different components at the same time e The remote control requires two AA batteries that should be replaced as needed It is strongly recommended to use Alkaline batteries which last longer without leaking Refer to page 1 9 for more information COMMAND MATRIX
226. tons are available for the open screen These buttons appear on the control bar with a one word description of their associated commands For instance the control bar shown below indicates that the SETUP button ENTER button and 4 and arrows are available for the open screen The SETUP button can be used to Exit or close the open screen The ENTER button can be used to Select the highlighted setting And the 4 and arrows can be used to Move or navigate around the screen No matter which menu screen is open the 4 gt 4 and v arrows will appear on the control bar However only the lighter colored arrows can be used to navigate around the screen OCW Move E SETUP aus SETUP NAVIGATOR The Setup Navigator is a convenient tool that can be used to configure basic RT 10 settings without navigating through the entire Setup menu It presents a series of prompts that provide step by step guidance through the process of selecting minimum audio video and language settings With the exception of the last Setup Navigator prompt all prompts represent a simplified version of actual Setup menu parameters For instance the TV Type prompt 3 5 is associated with the Video1 tab TV Screen parameter 3 25 The table on the next page lists all Setup Navigator prompts along with their possible settings and associated Setup menu parameters When the RT 10 is first powered on the Setup Navigator opens on the on screen display wheneve
227. tor opens press the remote control 4 and gt arrows to select the folder list on the left side of the MP3 Navigator When the folder list is selected press the and arrows to select the desired folder for which to create a program list When the desired folder is selected press the arrow to select the track list on the right side of the MP3 Navigator When the track list is selected press the a and arrows to select the desired track to include on the program list control PROGRAM button to add the selected track to the program list The icon shown at the right will appear to the left of the track name to indicate that the track has been added to the MP3 program list If no program list has been created for the loaded disc a new program list will be created beginning with the selected track When the desired track is selected press the remote P e To delete a track from the MP3 program list press the remote control CLEAR button The icon shown above will disappear from the left of the track name Program Mode continues on page 4 28 4 27 Playback Controls Lexicon Program Mode continued from page 4 27 8 Repeat steps 6 and 7 until all desired tracks have been added to the program list 9 When all desired tracks have been added to the program list press the MENU button to close the MP3 Navigator e To activate program playback press the PROGRAM button to open the program list Then pre
228. u screen is open pressing the PREV button performs no function NEXT Closes the current disc menu screen and opens the Same as DVD V amp DVD A Same as DVD V amp DVD A Perform no function next menu screen When the last menu screen is open pressing the NEXT button performs no function SEARCH When a DVD V is loaded pressing one of these Perform no function Perform no function Perform no function AUDIO buttons opens the corresponding menu screen SUBTITLE amp provided the loaded disc includes the corresponding ANGLE menu screen When a DVD A is loaded pressing one of these buttons performs no function RI 10 Playback Controls SELECTING DISC SETTINGS Some disc menus can be used to select disc settings such as audio track audio language and output format subtitle language and camera angle In some cases certain remote control buttons can also be used to select these settings without navigating through the disc menu Note Condition memory mode 4 10 stores audio language output format subtitle language and camera angle settings for up to 15 DVD Vs Once stored these settings will be automatically recalled whenever the disc is loaded AUDIO TRACKS AUDIO e Pressing the remote control AUDIO button opens one of the Audio bars shown in the next column which can be used to select the desired audio track audio language and output format e Audio track selection is avail
229. ubtitle Language English Auto Language On DVD Language On Subtitle Display K Subtitle Off WAssist Subtitle EBAY Move SETUP Ma did To select an Other language 1 When the DVD Language screen opens use one of the following methods to select the desired language a Press the remote control and arrows to scroll through the complete list of available languages When the desired language is highlighted press the remote control ENTER button to select this language and return to the Language tab b Press the remote control arrow to move the cursor to the first character space that appears on the right of the on screen display Then use the remote control number buttons to enter the numeric code for the desired language Refer to the table that begins on page A 14 to determine the appropriate numeric code When the desired language is selected press the remote control ENTER button to return to the Language tab Audiol A2 Videol V2 Language eui OSD Language English Audio Language English Subtitle Language English Auto Language On DVD Language English Subtitle Display With Audio Subtitle Off ESA RMS EBAL Move SETUP 3413 Note Some DVDs allow menu language to be selected from the disc menu Refer to page 4 3 for more information Subtitle Display On Off Assist Subtitle Controls the appearance of subtitles on the on screen display Select On to display su
230. udio output connectors Refer to the table on the next page for more information The Audio Out parameter is associated with the Setup Navigator Analog Jacks prompt 3 7 The Analog Jacks prompt and Audio Out parameter settings have no effect when the RT 10 is not using the analog audio output connectors Note The Audio Out parameter and Setup Navigator Analog Jacks prompt can be used to select the desired audio output format as long as a compatible audio track is selected on the loaded disc 3 16 RT 10 Setup Menus E Audio Out Analog Audio Output Digital Audio Output ource Parameter Front L R Center Surround L R Subwoofer Dolby Digital or MPEG PCM Dolby Digital or MPEG Dolby 2 Channel TO Mute Mute Mute sp 2 channel downmix Digital _ Front L R Dolby Digital encoded 5 1 Channel Front L R Center Surround L R Subwoofer e 2 Channel 4 T Digital 2 channel downmix m D V encoded Front L R Mute Mute Mute Front L R Dolby Digital D Karaoke 5 1 Channel V 2 Channel PME dts encoded Mute Mute Mute SURE S RUDI 5 1 Channel Front L R MPEC 2 Channel Mute Mute Mute o channel down mix encoded FrORELUR Front L R MIRES 5 1 Channel Center Surround L R Subwoofer 2 Channel add Mute Mute Mute DVD A LS 2 channel downmix 2 channel downmix 5 Front L R Front L R 5 1 Channel Front L R Center Surround L R Subwoofer 2 Channel DVD RW R Front L R Mute Mute Mute Dolby D
231. ure A frequency energy and if not installed and used in accordance with the National Electrical Code instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Antenna Lead n Wire Antenna Discharge Unit NEC Section 810 20 Consult the dealer or an experienced radio TV technician for help Electric Service gt Grounding Conductors Equipment amp NEC Section 810 21 Power Service Grounding Ground Clamps Electrode System NEC Art 250 Part H gt gt DOCUMENTATION CONVENTIONS This document contains general safety installation and operation instructions for the RT 10 Universal Disc Player It is important to read this user guide before operating this product Pay particular attention to safety instructions The following symbols are used in this document Appears on your
232. ut DTS PCM Linear PCM Out Down Sample On MPEG Out 2ch Area Digital Out BMulti ch Area SACD Playback fe DFA AaDAU Move SETUP 413 Audio2 MEE Audio Out Speaker Setting Gain Setting CD Digital Direct BVariable EBAY Move SETUP file Audioi PANTEON Language General Audio DRC Off Dolby Digital Out EDSEL DTS Out iDolby Digital PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area EBAY Move SETUP je Audioi PANTEON Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out M8 Digital Out MPEG PCM SACD Playback 2ch Are a E X L Move SETUP filme EN Audio MEN V2 Language General Audio Out MH ENE Speaker Setting 15 1 Channel Gain Setting CD Digital Direct EBAY Move SETUP je EN uaio2 ERA V2 Language General Audio Out 2 Channel Speaker Setting Gain Setting Fix CD Digital Direct EBAL Move Exit Audioi PANTEON Language General Audio DRC Off Dolby Digital Out Dolby Digital Linear PCM Out DTS PCM MPEG Out MPEG PCM Digital Out On SACD Playback 2ch Area EBAY Move SETUP Mais Audiol PANTEON Language General Audio DRC Off Dolby Digital Out Dolby Digital DTS Out DTS PCM Linear PCM Out Down Sample On MPEG Out MPEG PCM Digital Out Me SACD Playback ff SETUP
233. ve Still Picture Field Frame Auto Controls the appearance of still frame images When Field is selected the RT 10 produces tight stable and generally shake free still frame images When Frame is selected the RT 10 produces sharper but shakier still frame images When Auto is selected the RT 10 automatically selects the best viewing method for still frame images On Screen Display On Off Controls the appearance of DVD top menus When On is selected pressing the remote control TOP MENU button opens a DVD top menu when the loaded DVD includes a top menu In some cases the remote control MENU button can also be pressed When Off is selected pressing the TOP MENU or MENU button does not open a DVD top menu even if the loaded DVD includes a top menu Refer to the Navigating Disc Menus section that begins on page 4 3 for more information PNIS VAYA Video2 MET NECE ez Background Gray Still Playback Auto On noff Audio1 A2 v1 Video2 MENEM Background Video Adjust Still Playback On Screen Display On Angle Indicator Ma Off SETUP dia a U Move SETUP Mis Angle Indicator On Off oo Activates and deactivates the Y indicator When set to On the Y indicator appears on the front panel display when playback of a scene recorded from multiple camera angles is in progress When set to Off the indicator does not appear on the front panel display when playback of a scene recorded from mul
234. w Take care not to leave fingerprints dirt or scratches on disc surfaces 099 Load single sided discs with the label side facing upward and double sided discs with the side intended for playback facing downward Return discs to their cases when not in use Discs should be stored in an upright position out of direct sunlight and excessive heat humidity or cold 4 2 RI 10 Playback Controls e The RT 10 will attempt to load a disc whenever the disc drawer is closed even when the disc drawer is empty To load a disc 1 Review the bulleted items that begin on the previous page 2 Press the Open Close button to open the disc drawer 3 If the disc drawer is not empty remove the disc loaded in the disc drawer if applicable e The RT 10 is a single disc player Do not attempt to load more than one disc in the disc drawer at one time This might cause damage to the RT 10 the discs or both 4 When the disc drawer is empty load the desired disc in the disc drawer e Load single sided discs with the label side facing upward and double sided discs with the side intended for playback facing downward All discs must align with the circular guide inside the disc drawer 5 When the desired disc has been loaded press the Open Close button to close the disc drawer The disc drawer can also be closed with a gentle press against the front of the disc drawer NAVIGATING DISC MENUS Most discs include on screen displ
235. xicon com or complete and return the Product Registration card attached to the back cover of this user guide Product registration serves no warranty purposes Retain the sales receipt as proof of warranty coverage INSTALLATION CONSIDERATIONS The RT 10 requires special care during installation to ensure optimal performance Pay particular attention to the bulleted items that begin below and to other precautions that appear throughout this user guide CAUTION Before moving the RT 10 make sure the disc drawer is empty and the RT 10 is powered off with the front panel On Off button Then make sure the power cord is disconnected from the wall outlet and that other cables are disconnected from associated components Never lift or move the RT 10 during playback Discs rotate at high speeds inside the player Movement might damage the disc and the player DO e Install the RT 10 on a solid flat level surface such as a table or shelf or in a standard 19 inch equipment rack An optional rack mount kit is available from authorized Lexicon dealers e Select a dry well ventilated location out of direct sunlight Installation Considerations continues on page 1 4 1 3 Getting Started Lexicon Installation Considerations continued from page 1 3 DO NOT Install the RT 10 on a surface that is unstable or unable to support all four of its feet unless the RT 10 is installed in an equipment rack
236. yback of the loaded disc in a random order of chapters beginning with the currently playing chapter Random chapter playback includes chapters in the currently playing title It does not include chapters in other titles When the currently playing title includes just one chapter activating random chapter playback repeats playback of that chapter Group Activates playback of the loaded disc in a random order of groups beginning with the currently playing group When the loaded disc includes just one group activating random group playback repeats playback of that group Track Activates playback of the loaded disc in a random order of tracks beginning with the currently playing track When a DVD A is loaded random track playback includes tracks in the currently playing group When the currently playing group includes just one track activating random track playback repeats playback of that track When another disc format is loaded random track playback includes all tracks on the loaded disc When the loaded disc includes just one track activating random track playback repeats playback of that track Note Random playback is not available for Video CDs and SVCDs that include PBC menus Random Playback continues on page 4 18 Playback Controls Lexicon Random Playback continued from page 4 17 Random Chapter Random Random Track Random Off Random Title Group To activate random playback

Lexicon RT-10 CD Player User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents