Lenoxx Electronics CD-107 CD Player User Manual
Contents
1. Lenox Sound AM FM STEREO PROGRAMMABLE COMPACT DISC PLAYER MODEL CD 107 OPERATING INSTRUCTIONS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY RECEIVES AM FM STEREO BROADCASTS FM STEREO AND POWER LED INDICATORS 2 WAY POWER AC DC REQUIRES 6 SIZE C BATTERIES not included PLEASE READ CAREFULLY BEFORE USE IB CD107 AD FD E V1 SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash CAUTION TO REDUCE THE The exclamation point and arrow head RISK OF ELECTRIC SHOCK within the triangle is a within the triangle is DO NOT REMOVE COVER OR warning sign alerting a warning sign BACK NOUSERSERVICEABLE you of important alerting you of JPARTS INSIDE REFER instructions dangerous voltage SERVICING TO QUALIFIED accompanying the inside the product SERVICE PERSONNEL product SEE BOTTOM OF THE SET WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE THESE IMPORTANT SAFETY INSTRUCTIONS ARE INCLUDED AS APPLICABLE TO THE APPLIANCE CONVEYING TO THE USER THE INFORMATION ITEMIZED BELOW 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance and in the operating i2. display will show the total tracks on that CD Press the CD PLAY button The PLAY PROG lamp will be steady on the player will play all the tracks in order once LJ TRACK I Track PLAY PROG number lamp IB CD107 AD FD E V1 TIP When CD play is paused the track number will flash and no music will play To resume play press the PAUSE button again the track number will stop flashing and music will play TIP If you bump the set during CD play the music will stop or skip for a few seconds This is normal for this type of player USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL at the left side of the set PHONES JACK BACKWARD I lt FUNCTION SWITCH OPEN THE CD DOOR BY PRESSING HERE PLAY PAUSE Pil gt PI FORWARD To Adjust the volume Stop playback Pause playback Go to the next track Go back to the previous track Locate a point in a song To enjoy the music without disturbing others Remove the CD Turn off the power Press or Adjust VOLUME control STOP W PLAY PAUSE Pll The track number will flash during pause Press again to resume play after pause gt gt I FORWARDS K lt BACKWARDS BACKWARDS KE or FORWARDS gt gt I Press and hold down while playing until you find the point Insert your headphone optional not included plug into the PHONES jack at the left side of the set Press the right corner of the
3. high temperature areas Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting Batteries should be stabilized at room temperature prior to use after cold storage If this product does not operate normally see TROUBLE SHOOTING in this instruction manual If you can t resolve the problem or if the product is damaged refer to the LENOXX WARRANTY INFORMATION Opening or removing covers may expose you to dangerous voltages or other risks Incorrect reassembly can cause electric shock when the appliance is subsequently used If liquid leaks from the batteries carefully wipe this liquid Do not allow it to touch your skin and discard the leaking batteries Do not mix batteries OLD and NEW or CARBON and ALKALINE etc The use of rechargeable batteries is not recommended for this set because their voltage and life is lower than standard batteries Installation of batteries should be done by an adult only SAVE THESE INSTRUCTIONS IB CD107 AD FD E V1 CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source AC SOCKET Battery compartment TIP elf the plug of the AC power cord does not match your outlet do not force it Reverse it and try again The plugs are polarized and only fits one way into the wall outlet and back of the set eReplace the batteries when the POWER l
4. not open or mutilate the batteries Released electrolyte is corrosive and may cause damage to the eyes or skin It may be toxic if swallowed Be careful when handling batteries in order not to short the battery with conducting materials such as rings bracelets and keys The battery or conductor may over heat and cause burns Do not attempt to recharge non rechargeable batteries The batteries may leak corrosive electrolyte or explode Do not attempt to rejuvenate the batteries identified for use with this product by heating them Sudden release of the battery electrolyte may cause burns or irritation to eyes or skin All batteries should be replaced at the same time Mixing fresh and discharged batteries could increase internal cell pressure and rupture the batteries When inserting batteries into this product the proper polarity and or direction must be observed Reverse insertion of some or all of the batteries may result in battery electrolyte leakage or explosion Remove the batteries from this product if the product will not be used for a long period of time several months or more since during the period the batteries could leak damaging the product Discard weak or dead batteries as soon as possible since they are more likely to leak in the product Batteries should be replaced depending on the product when the display gets dim or if the Low Battery Indicator shows or if the sound gets distorted Do not store this product in
5. CD DOOR marked OPEN CLOSE press STOP first Slide the FUNCTION switch to OFF position IB CD107 AD FD E V1 PLAYING CD TRACKS REPEATEDLY REPEAT PLAY You can play CD tracks over and over in normal or program play modes see page 8 PLAY PROG REPEAT LAMP LAMP PLAY PAUSE FORWARD Pll gt gt l RANDOM BACKWARD BUTTON kea REPEAT PROGRAM BUTTON FUNCTION SWITCH 1 Slide the FUNCTION switch to the CD position 2 Select the track by pressing SKIP SEARCH BACKWARD I lt or FORWARD PPI and then press gt II 3 Press the CD REPEAT PROGRAM button To repeat Press Display shows Press the REPEAT PROGRAM REPEAT l k a single track song button once the REPEAT lamp N Q will be steady on E Pp Press the REPEAT PROGRAM REPEAT button twice the REPEAT lamp will be flashing all the tracks all songs PLAY PROG During programmed play press programmed tracks the REPEAT button twice both the REPEAT and PLAY PROG lamps will be flashing REPEAT PLAY PROG To cancel Repeat Play Press the REPEAT PROGRAM button until the REPEAT lamp goes off T IB CD107 AD FD E V1 SELECTING YOUR OWN MUSIC PLAYING ORDER Programmed Play You can make a program of up to 16 tracks in the order you want them to be played PLAY PROG LAMP REPEAT PROGRAM BUTTON 1 Slide the FUNCTION switch to CD position Make sure the CD is stopped 2 Press the REPEA
6. ING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH For customer service Dial 1 800 315 5885 monpay THURSDAY 9 00 AM 5 00 PM FRIDAY 9 00 AM 1 00 PM EST or Visit Our Website http www lenoxx com 2001 LENOXX ELECTRONICS CORP 2 GERMAK DRIVE CARTERET N J 07008 MADE amp PRINTED IN CHINA IB CD107 AD FD E V1 14
7. T PROGRAM button The letters PO will show and the PLAY PROG lamp will flash 3 Press gt gt I or 4 to select the tracks you want to program in the order you want 4 Press the REPEAT PROGRAM button to confirm The letters P1 will show and the PLAY PROG lamp will flash 5 Repeat steps 3 and 4 You can program up to 16 tracks the display will show Pa Pb Pf for program 11 16 6 Press gt I to start programmed play The PLAY PROG lamp will be flash To change the current program Just create a new program following the Programming procedure To cancel Programmed Play Slide the FUNCTION switch to OFF position 2 Random Play To play the songs in random order Press the RANDOM button and the display will show some moving symbols like FV gu 1 every 5 second Press gt l to skip to next random song To resume normal play Press the RANDOM button again IB CD107 AD FD E V1 LISTENING TO THE RADIO Connect the supplied AC power cord or batteries see page 4 1 CD OFF RADIO Slide the FUNCTION switch to l RADIO position the POWER lamp will turn on FUNCTION 2 AM FM _FMSIEREO Slide the BAND switch to the TaD proper band position AM FM or FM STEREO that you want BAND TUNING Tune into the station you prefer 3 e using the TUNING control at the right side of the set Adjust for the clearest sound 4 FMISTEREO 9 This indicator will light u
8. amp dims or when the player stops operating Replace all the batteries with new ones Before you replace the batteries be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3 on mrima To a wall outlet NOTE One blade of plug and outlet is wider 1 Connecting the AC power cord Insert one end of the supplied AC power cord located in the battery compartment into the socket located at the rear of the player and the other end to the wall outlet 2 Using the player on batteries Insert 6 size C batteries not supplied into the battery compartment To use the player on batteries disconnect and remove the AC power cord from the player upper upper lower 4 e ESEE Insert new batteries mes ness Haus FIG 1 according to sequence as shown on FIG 1 To remove the batteries open the door stick your finger into the hole on the bottom of the set and push the batteries out as shown on FIG 2 IB CD107 AD FD E V1 PLAYING A CD L e CD FUNCTION CD oe RADIO PLAY PAUSE Slide the FUNCTION switch to CD position the POWER lamp will turn on Press the right corner of the CD DOOR marked OPEN CLOSE to open the door and place the CD in the CD compartment The label side of the CD should face upward Close the CD DOOR by pushing it down The
9. e player is left in a car parked in the sun be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun Since a strong magnet is used for the speakers keep personal credit cards using magnetic coding or springwound watches away from the player to prevent possible damage from the magnets 11 On Power Sources e For battery operation use 6 size C batteries We recommend alkaline batteries for longer life e When the batteries will not be used for a few weeks or more remove them to avoid damage that can be caused by battery leakage or corrosion On Operation e f the player is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the CD player section Should this occur the player will not operate properly In this case remove the CD and wait about an hour for the moisture to evaporate This CD player is designed to be played on a stable no vibration position If you bump the set during CD play the music will stop or skip for a few seconds This is normal for this type of player If you have any questions or problems concerning your player please contact our customer service department IB CD107 AD FD E V1 PRECAUTIONS continued Notes on CDs e Before playing clean the CD with a cleaning cloth Wipe the CD from the center out Do not use solvents such as benzene thinner commerc
10. ers Insert the CD with the label side up Make sure that the CD compartment is closed Place the CD with the label side up Clean the CD Take out the CD and leave the CD DOOR open for about an hour to dry moisture condensation Make sure the FUNCTION switch is at CD position Clean the CD or replace it if the CD is badly damaged Place the player in a location free from vibration Check if your batteries are fresh Replace all the batteries with new ones if they are weak or bring the set near a window or rotate the set IB CD107 AD FD E V1 SPECIFICATION General Description Power source AC 120V 60Hz 12Watts DC 9V 6 size C batteries Alkaline batteries are recommended Speakers 2 3 8o0hm Output power 1 5W channel Dimensions Width 9 1 2 Depth 9 Height 6 1 2 Weight 3 5LBs without batteries CD Section Plays disc type Any normal CD used in portable players Laser wavelength 760 800 NM Tracking method 3 spot error detection 3 86 mm lens Frequency response 50Hz 15kHz 1 2dB NOTE This CD player will only play NORMAL music CDs or CD R CDs This set will not play CDRW encoded discs Radio Section Frequency range FM 88 108 MHz AM 530 1700 kHz LENOXxX reserves the right to make design and specification changes for product improvement PROTECT YOUR FINE FURNITURE WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLAC
11. formation with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure EXAMPLE OF ANTENNA GROUNDING AS PER NEC NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 ELECTRIC SERVICE EQUIPMENT Pa gt POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H Do not apply oil or petroleum products or solvents to any part of this set CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the bottom of the set IB CD107 AD FD E V1 BATTERY SAFETY INSTRUCTIONS CAUTION TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR 10 11 12 13 14 15 16 SET READ AND FOLLOW THESE INSTRUCTIONS Use only the type and size of batteries mentioned in the operating instructions booklet batteries are not included with this set please buy the proper batteries Do not dispose the batteries into a fire The cells may explode Check with local codes for possible special disposal instructions Do
12. ially available cleaners or anti static spray intended for vinyl LPs e Do not expose the CD to direct sunlight or heat sources such as hot air ducts nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car e Do not stick paper or stickers on the CD nor scratch the CD e After playing store the CD in its case If there is a scratch dirt or fingerprints on the CD it may cause a tracking error or skipping 12 MAINTENANCE Cleaning the Lens If the lens becomes dirty it may cause a skipping of sound during CD operation Clean with a commercially available lens cleaner and blower Cleaning the Cabinet Clean the cabinet panel and controls with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzene IB CD107 AD FD E V1 TROUBLE SHOOTING General CD player Radio Problem The power is not on There is no sound MQ appears in the display e even when a CD is in place CD does not play The sound drops out The sound is weak or has poor quality j m Remedy Connect the AC power cord to a wall outlet securely Make sure the batteries are inserted correctly and they are fresh Make sure the FUNCTION switch is at the right position as you want Adjust the volume Unplug the headphones when listening through speak
13. nstructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Water and Moisture The appliance should not be used near water forexample near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool and the like 6 Wall or Ceiling Mounting The appliance should not be mounted to a wall or ceiling 7 Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated ona bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that impede the flow of air through the ventilation openings 8 Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 9 Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 10 Grounding or Polarization Precautions should be taken so that the grounding or polarization means of an appliance is not defeated 11 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenient rece
14. p when receiving FM Stereo broadcasts IB CD107 AD FD E V1 USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FUNCTION SWITCH TIP To Slide or Adjust e f the FM broadcast is noisy slide the BAND Adjust the volume VOLUME control at the switch from FM Stereo left side of the set to FM MONO position i Turn off the Radio Slide the FUNCTION e Next time you want to switch to OFF position listen to the radio just slide the FUNCTION switch to RADIO The player automatically starts playing the previously tuned station To improve broadcast reception Change position of the antenna for FM or FM Stereo Move the set itself for AM IB CD107 AD FD E V1 10 PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes do not attempt to disassemble the cabinet Refer servicing to qualified personnel only Should any solid object or liquid fall into the player unplug the player and have it checked by qualified personnel before operating it any further On Placement Do not leave the player in a location near a heat source or in a place subjectto direct sunlight excessive dust or mechanical shock Do not place the player on an inclined or unstable place Do not place anything within 1 inch of the back of the cabinet The ventilation holes must not be covered for the player to operate properly and prolong the life of its components If th
15. ptacles and the point where they exit from the appliance 12 Cleaning The appliance should be cleaned only as recommended by the manufacturer 13 Nonuse periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time IB CD107 AD FD E V1 SAFETY INSTRUCTIONS 14 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 15 Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged 16 Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel 17 Power lines An outdoor antenna should be located away from power lines 18 Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code ANSI NFPA 70 provides in
Download Pdf Manuals
Related Search