Kenwood RFU-6100 Car Speaker User Manual
Contents
1. they exit from the appliance Never pull or stretch the cord 3 CAUTION Polarization This appliance may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 4 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating and these openings must not be blocked or covered The appliance should be situated so that its location or position does not interfere with its proper ventilation To maintain good ventilation do not put records or a table cloth on the appliance Place the appliance at least 10 cm away from the walls Do not use the appliance on a bed sofa rug or similar surface that may block the ventilation openings This appliance should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 5 Water and moisture The appliance shall not be exposed to dripping and splashing for example near a bathtub washbowl kitchen sink laundry tub in a2. wet basement ornearaswimming pool etc Do not place an object containing liquid such as a flower vase on the appliance 6 9 10 11 12 Temperature The appliance may not function properly if used at extremely low or freezing temperatures The ideal ambient temperature is above 5 C 41 F Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Do not place a flaming object such as a candle or lantern on or near the appliance Electric shock Care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings If a metal objects such as a hair pin or a needle comes into contact with the inside of this appliance a dangerous electric shock may result For families with children never permit children to put anything especially metal inside this appliance Enclosure removal Never remove the enclosure If the internal parts are touched accidentally a serious electric shock might occur Magnetic fields Keep the appliance away from sources of magnetic fields such as TV sets speaker systems radios motorized toys or magnetized objects Cleaning Unplug this appliance from the wall outlet before cleaning Do not use volatile solvents such as alcohol paint thinner gasoline or benzine etc to clean the cabinet Use a clean dry cloth Acce
3. 4404444nnnnnnnnnnnnnnnnnnnnnnnnnnn 914 MHz Ch nnel 2 4 3 22 GR 242er 4 Power supply rating umuenseersnnnesnnnennnnnnnn DC 15V 130 mA Dimensions u 2220u444000nnnnennnn Width 124 mm 4 7 8 Height 36 mm 1 7 16 Depth 126 mm 4 15 16 Net Weight csccececeseesseeseseeeeeeeeeeeeeeaeees 0 3 kg 0 7 Ib Notes 1 Kenwood follows a policy of continuous advancements in development For this reason specifications may be changed without notice 2 Full performance may not be exhibited in extremely cold locations below 0 deg C KENWOOD For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your dealer for infor mation or service on this product Model Serial Number
4. KENWOOD WIRELESS UNIT RFU 6100 INSTRUCTION MANUAL KENWOOD CORPORATION Before applying power A Caution Read this page carefully to ensure safe operation Units are designed for operation as follows U S A and Canada eeneen AC 120V only Safety precautions WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SER DO NOT OPEN VICEABLE PARTS INSIDE REFER SERVICING TO QUALI AVIS FIED SERVICE PERSONNEL THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS IN TENDEDTO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost Examine the unit for any possibility of shipping damage If your unit is damaged or fails to operate notify your dealer immediately If your unit was shipped to you directly notify the shipping company without delay Only t
5. _ GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMP POWER SERVICE GROUNDING 2 ELECTRICAL ELECTRODE SYSTEM BE ade NEC ART 250 PART H ELECTRIC SERVICE 18 19 20 21 22 23 Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal AC outlets Do not connect other audio equipment with a power consumption larger than that specified to the AC outlet on the rear panel Never connect other electrical appliances such as an iron or toaster to it to prevent fire or electric shock Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Attachment Do not use attachments not recommended by the appliance manufacturer as they may cause hazards Replacement parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts Unauthorized substitutions may result in fire electric shock or other hazards Safety check Upon completion of any service or repairs to this applia
6. e appliance has been exposed to rain or water D The appliance does not appear to operate normally by following the instruction manual Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation E The appliance has been dropped or the enclosure damaged F The appliance exhibits a marked change in performance Servicing The user should not attempt to service the appliance beyond that described in the instruction manual All other servicing should be referred to qualified service personnel Outdoor antenna grounding f an outside antenna is connected to the appliance be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE T__ ANTENNA LEAD IN WIRE AN GROUND CLAMPS La Ye ANTENNA DISCHARGE UNIT NEC SECTION 810 20
7. eless Transmitter RFU T6100 automatically enters standby mode On receiving an incoming audio signal from your Receiver again the Wireless Transmitter RFU T6100 automatically operate e When the Wireless Receiver RFU R6100 enters the standby mode the power indicator lights up red e Do not position the Wireless Receiver RFU R6100 and Wireless Transmitter RFU T6100 near metal such as heat ducts Metal can absorb RF signals e When there is an obstruction around other equipments that send signal from the Wireless Transmitter RFU T6100 the reception distance by the Wireless Receiver RFU R6100 will be short e The tests for range limits of the Wireless Receiver RFU R6100 and the Wireless Transmitter RFU T6100 are conducted in open air distance test Actual distance of the signal will be based on the construction of the building the unit is being used in as well as other factors such as outside interference e As for the Wireless Transmitter RFU T6100 input of this Wireless Unit it is optimal to use it with the receiver of Output Power 100 W Caution Sound will be distorted if it is above 120 W of Output Power e t may be greatly audible by test tone reproduction with the standup of sound for a moment for a level setup of a Surround Speaker e Anoise may be heard if the Wireless Transmitter RFU T6100 is carried on your receiver Please put on somewhere else Standby mode While the standby indicator is li
8. he consignee the person or company receiving the unit can file a claim against the carrier for shipping damage We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future Keep this manual handy for future reference RFU 6100 wireless unit Wireless Receiver RFU R6100 nne 1 Wireless Transmitter RFU T6100 ne 1 AG adaption en een er 1 2 EN IMPORTANT SAFEGUARDS AX Caution Read this page carefully to ensure safe operation Please read all of the safety and operating instructions before operating this appliance Adhere to all warnings on the appliance and in the instruction manual Follow all the safety and operating instructions These safety and operating instructions should be retained for future reference 1 Power sources The appliance should be connected to apower supply only of the type described in the instruction manual oras marked on the appliance If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For appliances intended to operate from battery power or other sources refer to the instruction manual 2 Power cord protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them pay particular attention to cords at plugs convenience receptacles and the point where
9. n for help For the U S A FCC Compliance Notice Audio video Receiver These devices comply with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation KENWOOD U S A CORPORATION 2201 East Dominguez St Long Beach CA 90801 5745 Telephone 310 639 9000 For Canada IC Industry Canada Notice Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met JEN Specifications Wireless Receiver RFU R6100 Output power 1 kHz 10 T H D at 8Q one channel driven Santa brennen a ati 50 W 50 W Power CONSUMPTION uuursnnnennnnnnnnnnnennnnnnnnnnnnnnnnnnnnnnn 25W Power supply rating oocommcncnncnnnncinnanananos AC 120V 60 Hz Dimensions nueeseresnnnenneennnnn Width 195 mm 7 11 16 Height 53 mm 2 1 16 Depth 196 mm 7 11 16 Net Weight cocos 0 9 kg 2 0 Ib Wireless Transmitter RFU T6100 Max input level uuneessseessnenennnnennennnnnnnnennnnnennnnnn 32 Vrms Radio frequency u222u4
10. nce ask the service technician to perform safety checks to determine that the appliance is in proper operationg condition Notes 1 Item 3 is not required except for grounded or polarized equipment 2 Item 17 and 18 are not required except for units provided with antenna terminals 3 Item 17 complies with UL in the U S A q EN Operation 1 Connect your Surround Speaker with the comespending color terminals on the Wireless Receiver RFU R6100 Right Gray Left Blue Surround Surround Speaker R Speaker L Wireless Receiver RFU R6100 2 Connect the Wireless Receiver RFU R6100 power cord to your power supply e The Wireless Receiver RFU R6100 power indicator lights up green 3 Connect the AC adapter to the Wireless Transmitter RFU T6100 and power supply Use the enclosed AC adaptor AC 150015A for this product 4 Make sure you position both the Wireless Transmitter RFU T6100 and Wireless Receiver RFU R6100 at least 2 meters 6 6 ft apart e The control distance of the RF signal is about 30m 100 ft provided there is no obstacle 5 Connect and carefully match the colors of the wires on the Wireless Transmitter RFU T6100 to the corresponding sur round speaker terminals on your Receiver N Receiver Right Gray a and Black Es 8 oo booo E 9 O gt ooo Wireless Transmitter Y RFU T6100 Left Blue a
11. nd Black e The Wireless Transmitter RFU T6100 power indicator lights up green 6 Check and adjust the 4 channel toggle switch on the Wireless Receiver RFU R6100 CHANNEL SELECTOR switch and Wireless Transmitter RFU T6100 so that both units are using the same channel Wireless Transmitter RFU T6100 a Wireless Receiver RFU R6100 CHANNEL SELECTOR switch 4 channel switch 7 On your Receiver play an audio source and activate the surround sound mode option Adjust the volume to reproduce surround sound in the rear speakers 8 Extend the antenna vertically on both the Wireless Receiver RFU R6100 and Wireless Transmitter RFU T6100 to im prove reception Check the antennas are safely positioned without obstruction To ensure quality sound production and transmission e Place both the Wireless Receiver RFU R6100 and Wireless Transmitter RFU T6100 off the ground recommended minimum height of 30cm 1 ft e Avoid placing the Wireless Transmitter RFU T6100 too close to your Receiver AC adapter TV or other electrical equipment as it may cause electrical interference e In case of sound distortion please select another channel for both the Wireless Receiver RFU R6100 and Wireless Transmitter RFU T6100 The distortion could be the result of interference caused by other equipment using same frequency channel in your house or neighbourhood 5 EN Notes e After you switch off your Receiver the Wir
12. ssories Do not place this appliance on an unstable cart stand tripod bracket or table The appliance may fall causing serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the appliance Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn 3 EN AX Caution Read this page carefully to ensure safe operation 13 14 15 16 17 Lightning For added protection for this appliance during alightning storm or when itis left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the appliance due to lightning and power line surges Abnormal smell lf an abnormal smell or smoke is detected immediately turn the power OFF and unplug the appliance from the wall outlet Contact your dealer or nearest service center Damage requiring service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C Th
13. t a small amount of power is supplied to the system This is called standby mode 6 EN For the U S A FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technicia
Download Pdf Manuals
Related Search