Kenwood CD-423M Stereo System User Manual
Contents
1. Jack Remove the pro tection cap when l using the DIGITAL OUT OPTICAL DIGITAL INPUT 1 OPTICAL I Optical fiber cable I Commercially available 4 DIGITAL OUT OPTICAL To wall AC System control cord outlet Optical fiber cable Commercially available OPTICAL SYSTEM CONTROL KENWOOD EO cD Digital amplifier or receiver etc DTS Disclaimer clause When playing DTS encoded CDs excessive noise will be exhibited from the analog stereo outputs To avoid possible damage to the audio system the consumer should take proper pre cautions when the analog stereo outputs of the CD player is connected to an am plification system To enjoy DTS Digital Surround playback an external 5 1 channel DTS Digital Surround decoder system must be connected to the digital output S PDIF AES EBU or TosLink of the CD player 1 Connect all cords firmly If connections are loose there cou Ca d be loss of sound or noise produced 2 When plugging and unplugging connection cords be sure to first remove the power cord from the AC outlet Plugging unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit System connections Connection to2. sysTEM Cassette deck or MD CONTROL e You can connect the system control cord to either system control jack of the unit SA e Do this operation after completing all connections Ensure that the power plug is not connected 1 Ifyour amplifier or receiver does not have a system control as terminal do not connect any system control cords to the system control terminals on the other components 2 Do not connect system control cords to any components other than those specified by KENWOOD It may cause a malfunction and damage your unit 3 Be sure the system control plugs are inserted all the way in to the system control terminals System control operations Remote Control Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver Automatic Operation Automatically switches the input selector on the amplifier or receiver when you start playback from this unit Synchronized Recording Lets you synchronize recording with the start of playback when recording from a CD Also the simple CCRS operation enables great recordings from CDs See the operating instructions supplied with your cassette deck for details Controls and indicators Play indicator Text information display The displays given in this manual are approximations only They may differ from what actually
3. Some track titles contain so much text information that the full R 15 titles will not fit on the display In cases like this the letters on the display move from right to left so that the non visible part of the title is revealed This type of display movement is known as scrolling of display Display example Scroll display Time display Each press of the DISPLAY key changes the displayed contents DISPLAY Gane Yi Track title display only CD TEXT ein the TRACK mode MUSIC TYPE mode and USER FILE mode information is displayed in order of then Disc No Track No display During Stop In the PGM mode information is displayed in order of ee Ne then Dist title Only when a track in a CD TEXT disc is programmed as the first track Elapsed time of track being played e Inthe TRACK mode information is displayed in order of Remaining time of track being played then Elapsed time of entire disc During Play eln the PGM mode RANDOM mode MUSIC TYPE mode T lights up USER FILE mode and BEST SELECTION mode informa D Remaining time of entire disc tion is displayed in order of then T lights up Displaying all the text information In the case of a CD TEXT disc the text information shown below is displayed automatically during norma
4. Inserts a space at the time of character input DELETE CLEAR key Used to delete the entered contents At he time of character input characters are deleted Remove the cover Insert batteries elnsert two AA size R6 batteries as indicated by the polarity marking Close the cover Operation After plugging in the power cord press the POWER key of the main unit to turn the power ON When the power j lt is turned ON press the key of the function to be operated a j Remort control eWWhen pressing more than one remote control key successively press the keys securely by leaving an interval of 1 second or more between keys CA E light sensor sO 43 ae a 6m 30 30 Operating range approx 1 The supplied batteries are intended for use in operation checks Therefore their lives may be shorter than ordinary batteries 2 When the remote controllable distance gets shorter than before replace both batteries with new ones Notes 3 Malfunction may occur if direct sunlight or the light of a high frequency lighting fluorescent lamp enters the remote control light sensor In such a case change the system installation position to prevent the malfunction Preparation Up to 200 CDs can be loaded in the carousel Disc exchange 10 also is possible during playback Never let
5. World Music Previous Next type type a When Rock Music is selected e When the selected disc corresponds to CD TEXT and contains a genre code that genre code is registered as the music type To confirm the genre code Displaying all the text information 15 XQ Ej Select the desired disc N e The disc number can be selected directly by using the numeric keys in place of the DISC SKIP DOWN UP keys jic cide e Repeat step Gif it is required to register another disc in the music type DOWN UP gt SET selected above Cees e To register another music type exit the MUSIC TYPE SET mode once Previous QO next disc Ga and restart from the beginning disc Rk To quit MUSIC TYPE SET mode Press the MODE key 24 By registering one of music types to each disc it is pos sible to enjoy playback of discs of a selected music type Random playback of only the discs belonging to a selected music type is also available Preparation e Close the door panel 71 e Register music type 23 eCheck that the unit is in the normal play TRACK mode 13 RR Listening to music by genre MUSIC TYPE mode Playing the music type music TYPE PLAY mode Activate the music type play mode Press the MODE key MODE a Select MUSIC TYPE DISC SKIP DOWN UP SET xN wr Select MUSIC TYPE PLAY DISC SKIP DOWN UP SET Oo QS Ca CA 2 Select the music type
6. when the door panel is open We recommend to register titles while discs are being inserted Preparation Set the CD player to stop mode eCheck that the unit is in the normal play TRACK mode 13 RR Assigning Title TITLE INPUT mode Switch to title input mode Press the MODE key MODE Select TITLE INPUT DISC SKIP N UP Set the input Be 2 Select the desired disc O Select the disc number DISC SKIP DOWN UP Previous disc aT Next disc C Set the input Si m ET Ca e When the MODE key is pressed during TITLE INPUT mode the TITLE INPUT mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes e The disc number can be selected directly by using the numeric keys in place of the DISC SKIP DOWN UP keys e During playback the disc only being played can be selected 2 As the entered title and the CD TEXT title information are memorized the information may be displayed even when a disc has been removed as 1 For discs corresponding to CD TEXT a new title can not be registered Notes In regard to disc information reading The entered title is read in to the disc with the following timing eWhen the door panel is closed eWhen the title input mode is exited while the door pa
7. O Select the disc number DISC SKIP DOWN UP O R TI disc CA Previous disc Within 8 seconds Play the disc ENTER gt i a x Ej Set the listening volume O Adjust the volume on the amplifier or receiver Stop playback Set the timer for the desired ON time FE set the TIMER PLAY switch to ON Main unit m TIMER PLAY OFF ON Audio timer Oo coo i200 m EF To AC outlet Amplifier or receiver Audio cord e The disc number can be selected directly by using the DISC SELECTOR key and numeric keys in place of the DISC SKIP DOWN UP keys e Read the instruction manual of the timer carefully e WWhen the set time comes playback will start automatically e The playback mode will be TRACK mode 33 Important items Disc handling precautions Handling Hold the discs so that you do not touch the playing surface Label side Playing side Sticker Do not attach paper or tape to either the play ing side or the label side of the discs Sticky paste Cleaning If fingerprints or foreign matter become at tached to the disc lightly wipe the disc with a soft cotton cloth or similar from the cen ter of the disc outwards in a radial manner Storage When a disc is not to be played for a long period of time remove it from
8. and restart from the beginning eThe same disc can be registered in more than one user files elf the CHECK key is pressed while the disc number is blinking the music type of the disc is displayed provided that its music type has been registered To quit USER FILE SET mode Press the MODE key 26 When user files have been registered for the discs it is possible to enjoy playback of discs of the selected user file Random playback for a selected user file is also possible e Close the door panel 71 e Register user file 25 eCheck that the unit is in the normal play TRACK mode 13 RR Preparation Reorganizing discs to desired groups USER FILE mode Playing the user file USER FILE PLAY mode Activate the user file play mode Press the MODE key MODE a Select USER FILE DISC SKIP DOWN UP a Select USER FILE PLAY DISC SKIP DOWN 5 Ca EA 2 Select the user file DISC SKIP DOWN UP Previous file TONE file Ca eWhen the MODE key is pressed during USER FILE PLAY mode the USER FILE PLAY mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes The display flashes Ej Start playback ENTER a Each press switches the modes as follows USER FILE 1 USER FILE
9. carrier for shipping damage We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future Keep this manual handy for future reference Accessories Remote control unit 1 Batteries R6 AA 2 Quick Start Guide Naming Discs Discs can be given disc names up to 25 characters Although the most convenient time to enter disc names is when you insert the discs into the player for the first time that way the player keeps track of the disc names for you as you insert the discs you can use this procedure to enter or change disc names any time you want These instructions explain how to enter disc names when you insert the discs into the player for the first time 1 Open the loading door A Select an empty disc Insert a CD in the and leave it open for slot empty slot Make sure this entire operation the label faces to Enter the disc i i nuraber directly kenwooo M Ase uay wards your right on o numee 5 that the slot is keys es in the loading S Joga position and LABEL FACES p then press SET Soa the display will ae TOWARDS RIG show the disc i number ie OR Use the DISC skip DOWN UP keys to se lect the disc 4 Enter the disc name 1 Press MODE Use the pisc skip DOWwN uP to select title input mode The display flashes 8 The selected charac
10. digital amplifier or MD Connect the DIGITAL OUT OPTICAL jack to the digital input jack of the amplifier DAT recorder MD recorder etc using an optical fiber cable which is commercially available in audio stores Optical fiber cable eWhen using an optical fiber cable to connect this unit to a digital amplifier insert the plug straight into the jack until a snap sound is heard e Be careful not to bend coil or bundle the optical fiber cable e Optical fiber cables available on the market may not always be able to be used with this player If your cord cannot be used with this unit consult the store from which you purchased the cord or your nearest dealer Connection to a general use amplifier Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks or AUX jacks of the amplifier System control connections Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient Amplifier or receiver system control operations a F This unit is compatible only with the SL16 mode The system FS control operation is not available if the unit is connected in the XS8 connection mode S If your component has the mode select switch set the connected lt components to the SL16 mode 2 This unit SYSTEM enw000 CONTROL z Ses
11. from track No 1 12 Searching the user file U FILE SEARCH mode 31 Playback from desired track ccceseeeeeeeeeeees 14 gt ae ys Displ 15 Listening to your favorite titles ISp ays sssassasnssnnsnnsss Beane PPPTTTITTTTTTT Tete eee ETeeeeeel BEST SELECTION mode SEEE E 32 Programming tracks in desired order PGM mode 16 Registration of best selection file ssssssseeseeon 32 Repeated playback REPEAT mode sssssoscsseccsssccsnscesnee 18 i Playing the best selection file cece 32 Playback in a random order RANDOM mode Ce ot 19 Timer operation ceeeeeeeeeseeseuseucenceucegeegeeeeeseesousoucecceuceueages Registration of Title tescssssssessssesssesssiesees 20 Important 1OMS esrreeeereescrticestneerisertinetineennettin Assigning Title TITLE INPUT mode ccc sssssssssssseeeeeeee 20 In case of difficulty To change or delete a title 00 0 22 Specifications sseccessssesssseecensssessssteeensssesnsscsenssseens 4 Before applying power Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost Examine the unit for any possibility of shipping damage If your unit is damaged or fails to operate notify your dealer immediately If your unit was shipped to you directly notify the shipping company without delay Only the consignee the person or company receiving the unit can file a claim against the
12. key is pressed during FILE NAME INPUT mode the FILE NAME INPUT mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes DISC SKIP DOWN UP Previous file Se Next file ie gt _ gt Q es Ej Enter the file name Store the file name Each press switches the modes as follows USER FILE 1 USER FILE 2 USER FILE 3 gt USER FILE 4 gt USER FILE 5 USER FILE 6 USER FILE 7 gt USER FILE 8 elf user file names have already been registered their names are displayed in place of the above e For the character input procedure see step B in Assigning Title gt ARR ENTER gt i To change or delete a file name Q Perform steps and B above For the character correction and deletion proce dure see To change or delete a title 22 Press the ENTER key ENTER gt i To quit FILE NAME INPUT mode Press the MODE key Reorganizing discs to desired groups USER FILE mode 28 Preparation e Close the door panel EN e Register user file 25 eCheck that the unit is in the normal play TRACK mode 13 RR To clear the user file USER FILE CLEAR mode The following procedure clears the registration of all discs in the user files and the user file names The user file names re
13. radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interfer ence to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help For the U S A CAUTION Se a ee Use of controls or adjustments or performance of procedures other than KENWOOD CORPORATION t
14. 2 USER FILE 3 USER FILE 4 gt USER FILE 5 USER FILE 6 gt USER FILE 7 USER FILE 8 elf user file names have already been registered their names are displayed in place of the above Assigning user file names 27 e Playback is performed in increasing order of the disc numbers they were registered for the respective user file Skipping to the next disc is done when the gt key is pressed e Each time the CHECK key is pressed the registered disc numbers are displayed in increasing order of the disc numbers For repeated playback Press the REPEAT key to select REPEAT ON For random playback Press the RANDOM key e Select RANDOM OFF or press the m key to quit random playback To clear the user file registered for a disc Press the CLEAR key during playback of the disc to be deleted To quit USER FILE PLAY mode Press the MODE key Preparation e Register user file gt eCheck that the unit is in the normal play TRACK mode 13 RR e Close the door panel 71 Reorganizing discs to desired groups USER FILE mode 27 Assigning user file names FILE NAME INPUT mode Activate the file name input mode QO Press the MODE key MODE wr Select USER FILE DISC SKIP DOWN UP a Select FILE NAME INPUT DISC SKIP DOWN UP CO a 2 Select the desired user file When the MODE
15. Ce Cs Within 8 seconds O Set the input SET Car No Skipping tracks CHARACTER DOWN UP To skip backward Qe Nto skip forward Ye Normal play TRACK mode Display when disc No 123 is selected eT he disc number can be selected directly by using the DISC SELECTOR key and numeric keys in place of the DISC SKIP DOWN UP keys eWhen the disc corresponds to CD TEXT or when the disc title has been registered the disc title will be displayed with scrolling Discs can be selected by the disc title Registration of Title 20 eRepeat step when it is required to change the disc number eWWhen the kea key is pressed once during playback the track being played will be played from the beginning Press the numeric keys in the following order Track No 8 8 Track No 14 1 4 Track No 20 2 0 Display when track No 8 is selected e Playback starts eWhen the disc corresponds to CD TEXT the track title is displayed Tracks can be selected by the track title e Repeat step B when it is required to change the track number Searching CURSOR LEFT RIGHT Backward search Qo N Forward search Ca e Playback starts from the position where the key is released Displays Displays scrolling ed In the case of a CD TEXT disc the disc track titles are displayed Note 7 in up 25 characters even when more than characters are stored
16. DISC SKIP DOWN UP Previous type Next type e Ej Start playback ENTER gt i e When the MODE key is pressed during MUSIC TYPE PLAY mode the MUSIC TYPE PLAY mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes The display flashes When Adult Contemporary is selected e Playback is performed in increasing order of the disc numbers to which the selected music type has been registered Skipping to the next disc is possible by pressing the gt key e Each time the CHECK key is pressed the registered disc numbers are displayed in increasing order of the disc numbers For repeated playback Press the REPEAT key to select REPEAT ON For random playback Press the RANDOM key eSelect RANDOM OFF or press the m key to quit random playback To clear the music type registered for a disc Press the CLEAR key during playback of the disc to be deleted To quit MUSIC TYPE PLAY mode Press the MODE key Reorganizing discs to desired groups USER FILE mode Eight user files are available for registering desired discs This makes the user possible to create files registering the discs of a favorite artist s or the user s favorite discs The user files can be named as desired Preparation e C
17. EPEAT Start playback ENTER gt i 4 To repeat one selected disc r Check that the unit is in the normal play TRACK mode Select the disc number DISC SKIP DOWN UP Previous disc Next disc Within 8 seconds Start playback U On ENTER gt i a Switch REPEAT ON REPEAT E a For random repetition 19 For music type repetition 24 For user file repetition 26 For best selection repetition 32 e Up to 32 tracks can be programmed by repeating steps e The current status is displayed when the key is pressed once When it is pressed while the status is displayed the repeat ON status can be set to OFF or vice versa e All of the programmed tracks will be repeated eIn case only one track is programmed only that track will be repeated To cancel repeated playback Press the REPEAT key twice REPEAT ON OFF e The disc number can be selected directly by using the DISC SELECTOR key and numeric keys in place of the DISC SKIP DOWN UP keys e The current status is displayed when the key is pressed once When it is pressed while the status is displayed the repeat ON status can be set to OFF or vice versa To cancel repeated playback Press the REPEAT key twice REPEAT ON OFF Playback in a random order RANDOM mode Use the following procedure to activate random playback which selects a track at random after ever
18. KENWOOD MULTIPLE COMPACT DISC PLAYER DPF J3030 CD 423M INSTRUCTION MANUAL KENWOOD CORPORATION This unit is designed for home use only If the unit is used in a location other than at home such as in a shop for commercial use in a car or in a ship etc and is damaged a service fee may be charged even during the warranty period This instruction manual is used to describe multiple models listed above Model availability and features functions may differ depending on the country and sales area Hise DIGITAL AUDIO B60 4446 08 EN B e fi or e a ppl yi n g p 0 wer A Caution Read this page carefully to ensure safe operation Units are designed for operation as follows 2 U S A and Canada uaesesssssssssssssssssssesssssssssasssssnsssssassssssssssenseses AC 120 V only Europe and U K ssssssssssssnnsnsunruuuu1u1000111nnnnnnnnnnnnnnnnnnnnnnnnnnnn AC 230 V only Safety precautions WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER RISK OF ELECTRIC SHOCK OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALI DONOLOPEN FIED SERVICE PERSONNEL THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERALTRIANGLE IS INTENDED TO ALERT THE USERTO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PROD UCT S ENCLOSURE THAT MAY BE
19. OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS E EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO E PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE TERATURE ACCOMPANYING THE APPLIANCE The marking of products using lasers Except for some areas CLASS 1 LASER PRODUCT The marking is located on the rear panel and says that the compo nent uses laser beams that have been classified as Class 1 It means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit Before applying power Special features CD player with 200 disc changer This unit can accommodate up to 200 discs and can be used like a home jukebox Title registerable In case of a disc not corresponding to CD TEXT you can register a disc title or other information 20 Disc search is possible by specifying the initial letter of the desired disc title 3 Filing functions suitable for a 200 disc changer A Sa i i An enhanced filing function is provided to handle the large disc capacity Music type Discs are filed by 26 music genres 23 8 user files Discs can be registered in up to 8 user files User files can be named as desired L2 Best selection Only favorite tracks can be registered and played gt RR Low standby power consumpt
20. To enter a space SPACE CHECK e WWhen a title is to be deleted delete all characters one by one To quit TITLE INPUT mode Press the MODE key Listening to music by genre music TYPE mode Discs can be registered separately by 26 types of music genres 23 Preparation e Close the door panel 71 eCheck that the unit is in the normal play TRACK mode 13 RR Registration of music type music TYPE SET mode Activate the music type set mode eWhen the MODE key is pressed during MUSIC TYPE SET mode the CPress the MODE Kog MUSIC TYPE SET mode is cancelled MODE wa Each press switches the modes as follows Select MUSIC TYPE MUSIC TYPE USER FILE pown o Sup SET DISC SEARCH _ TITLE INPUT os ALL DATA READ U ALL INFORMATION The display flashes Select MUSIC TYPE SET M Scud Gee DISC SKIP DOWN UP Mm a a S 2 Select the music type Each press switches the modes as follows Adult Contemporary Alternative Rock Children s Music gt Classical Contemporary Christian Country Dance gt Easy Listening Folk Gospel Hip Hop gt Jazz Latin gt Musical New Age Opera Operetta Pop Music gt RAP pown op a Reggae gt Rock Music Rhythm amp Blues Sound Effects AD Cy gt Ca Sound Track gt Spoken Word
21. appears on the display Pause indicator DISPLAY O O OOD murmu compact nisc paver PUSH OPEN E EG vm i lt r 5 S lt gt POWER key STANDBY indicator For the U S A and Canada 1 key STANDBY indicator For other countries OTIMER PLAY switch Used for timer play ON OFF Door panel O RANDOM key Press to start random playback DISPLAY key Switching between title display and time display Q DISC SKIP knob Used for disc selection Characters are selected at the time of character input Standby mode CONFIRM key The present playback mode is displayed OREPEAT key Press to start repeated playback Play Pause key gt 11 Remote control light sensor Stop key m Skip keys lt lt gt gt Press to skip to the beginning of another track Characters are selected at the time of character input While the standby indicator of the unit is lit a small amount of current is flowing into the unit s internal circuitry to back up the memory This condition is referred to as the standby mode of the unit While the unit is in the standby mode it can be turned ON from the remote control unit Operation of remote control unit KENWOOD CONFIRM CHARAC 7P MODE Ole 65 CHARACTER DOWN G GD REMOTE CONTROL UNIT RC PO714 Model RC P0714 Infrared ray sys
22. beginning with the specified character NO ENTRY will be displayed To quit CHARAC SEARCH mode Press the MODE key To play the searched disc r If disc is searched while the door panel is left open the carousel rotates to move the search target disc on the front If the search target Cg disc is being played DXXX BUSY is displayed 29 Preparation TRACK mode e Register music type eCheck that the unit is in the normal play Disc search DISC SEARCH mode Searching the music type M TYPE SEARCH mode The discs registered in the specified music type can be searched in sequence Activate the music type search mode Press the MODE key MODE a O Select DISC SEARCH DISC SKIP DOWN UP a Select M TYPE SEARCH DISC SKIP DOWN UP wr 2 Select the music type to be searched eWhen the MODE key is pressed during M TYPE SEARCH mode the M TYPE SEARCH mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes The display flashes DISC SKIP DOWN UP Previous L N net type type CA To search the next disc DISC SKIP DOWN UP os Each press switches the modes as follows Adult Contemporary Alternative Rock Children s Music gt Classical gt Contem
23. ceeeseeesceeseeeseeeeeeeeeeneneenes Class 1 IEC D A Convertors General D A Conversion s sssssssssssesssressennurrnunrnnnnnnnnnnnnnnennnnnunnnnnnnnnnnnnnnnnnnnna 1 Bit Power consumption cccceececeeseeeesseeeesseeesssneeeeseneneneeeesseeeesaees 10 W Oversampling ccccccssscecsseeeseseeeesseeeessneeessneeesseesesees 8 fs 352 8 kHz Dimensions W 440 mm 17 5 16 H 163 mm 6 7 16 Audio D 479 mm 18 7 8 Frequency response ccccceseeseeeeeeeeeeeeees 4 Hz 20 kHz 0 5 dB Weight Net ieaiaia aaaea aaa aarda aaan aaae 7 kg 15 4 Ib Signal to noise ratio ccceeeeeeeseeeteeeeeeeeteeeeee More than 103 dB Dynamic range cccceeceeseeeeeeeeeeeneeeeseeeeeeeneeeeeeeeees More than 95 dB Total harmonic distortion noise E A A TT Less than 0 005 at 1 kHz Channel separation cccccssseeseeees More than 95 dB at 1 kHz Wow amp flutter ccccsccsssseessseeessseeeesseeeesseeees Unmeasurable Limit Output level impedance Fixed hin iann Sita aii sien avi aditi 2 0 V 1 KQ Digital output Optical aaaeeeaa 15 dBm 21 dBm Wave length 660 nm 1 KENWOOD follows a policy of continuous advancements in development For this reason specifications may be changed without notice 2 The full performance may not be exhibited in an extremely cold location under a water freezing temperature Gal For the U S A FCC WARNING This equipment may generate or use
24. er use the traditional KENWOOD 10 key approach or direct numeric input Special input method for CD player with 200 disc changer To input 42 4 2 To input 115 1 1 5 To input 200 2 0 O Same input method as other KENWOOD products To input 42 10 10 10 10 2 To input 115 100 10 5 To input 200 100 100 What is the normal play TRACK mode Playback is made from the first track The normal playback mode is called TRACK mode Press the CONFIRM key to confirm the present mode CONFIRM A Ye TRACK mode PGM mode BEST SELECTION mode To set the unit to the TRACK mode At the time of PGM mode Press the RMODE key CHARAC P MODE 3 At the time of BEST SELECTION mode Press the key during playback At the time of MUSIC TYPE mode or USER FILE mode Press the MODE key MODE At the time of RANDOM mode Select RANDOM OFF RANDOM At the time of REPEAT mode Select REPEAT OFF REPEAT 13 Playback from desired track Select the disc O Select the disc number DISC SKIP OWN UP ED CI a EE CA Previous disc Within 8 seconds O Set the input Go to step within 8 sec 2 Select the track number QO Input the track number 1 2 3 4 CO Co CO 5 6 7 8 Cae 9 o 10 100 Ua
25. g the unit Notes 2 If blinking PLEASE WAIT is displayed when the door panel is opened do not attempt to change the disc 12 Normal play track mode Playing tracks in order from track No 1 Use the following procedure to play a CD in the original order of tracks from track No 1 Select the disc DISC SKIP DOWN UP Previous disc S aes Next disc Ce Go to step within 8 sec 2 Start playback ENTER Ca To pause playback ENTER gt i Each press pauses and plays the CD alternately eEach press of a key increases or decreases the disc number Holding the key depressed varies the disc numbers successively eWhen the disc corresponds to CD TEXT or when the disc title has been registered the disc title will be displayed with scrolling Discs can be selected by the disc title Registration of Title 20 Display when disc No 123 is selected See ee To stop playback Direct disc selection Press the DISC SELECTOR key DISC SELECTOR X Within 8 seconds Input the disc number a bood bbodwbc lt s 100 OOm Within 8 seconds Start playback ENTER Na Normal play TRACK mode Press the numeric keys in the following order Disc No 63 6 3 Disc No 100 1 0 0 How to input numeric values The input method for this product is of two different types One can eith
26. hose specified herein may result in hazardous radiation exposure 2967 3 ISHIKAWA CHO HACHIOJI SHI TOKYO JAPAN of labels on or inside the product relating to laser product safety FORMS TO DHHS REGULATIONS NO 21 CFR 1040 10 CHAPTER 1 SUBCHAPTER J In compliance with Federal Regulations following are reproductions l ze l KENWOOD CORP CERTIFIES THIS EQUIPMENT CON L Location Back Panel J For your records KENWOOD Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product Model Serial Number
27. ingly wait for the DISC DETECTION indication to go out before opening the door panel When the disc information has been read in at the time of regis tration of disc information like title music type etc the disc information can be recalled even when the disc insertion place is changed zg SA Close the door panel a N In regard to ALL DATA READ mode The disc information for all discs will be read We recommend to execute this mode before playback after discs have been exchanged Close the door panel before operation Press the MODE key MODE wr Select ALL DATA READ DISC SKIP DOWN UP 0 fi Set the input Si con ET CA Preparation 11 eWhen a title has been registered and the door panel is closed reading operation is performed automatically The display flashes Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION Search in progress or reading information The display flashes e Repeat the above procedure so that the complete disc information is read into the CD player e In the case of a non CD TEXT disc the D001 NO CD TEXT display will appear for approx 3 seconds To quit ALL DATA READ mode Press the E key 1 Please remove all CDs from the carousel before movin
28. ion The power consumption during standby is no more than 2 W C on t e n ts Caution Read the pages marked A carefully to ensure safe operation A Before applying pOWer ss sssssssss1ssssrrssurrnnsnrannurnnnnnnnne 2 Listening to music by genre MUSIC TYPE mode 23 A Safety precautions Registration of music type MUSIC TYPE SET mode 23 Special features es Playing the music type MUSIC TYPE PLAY mode 24 Quick Start Guide sudiabiscuubosttvsdtviveidecsdeddnistiestateersineictigea 5 Reorganizing discs to desired groups System CONNECTIONS ssssssssessssesssssssssssessssssssnessenesienes 6 USER FILE mode eesssssssssssssssssssssssessssressssssesen 25 Controls and indicators ssssssssessssessesssnesesnesienes 8 Registration of user file USER FILE SET mode 25 Playing the user file USER FILE PLAY mode 26 Operation of remote control unit eseeseesseeeesesteseenees 9 Assigning user file names FILE NAME INPUT mode 27 ER batteries To clear the user file USER FILE CLEAR mode 28 eae nick Disc search DISC SEARCH mode ciscvsssrrtesnrinesnie 29 Preparation innesi aoe Loadina di in th I 10 Searching a disc by the disc title oading discs in the carousel ececeeeeeeees CHARAC SEARCH mode o 29 Normal play TRACK mode ccsssecsssssscsssessssesssseseess 12 Searching the music type M TYPE SEARCH mode 30 Playing tracks in order
29. isc number DISC SKIP DOWN UP Sess Next disc wr Within 8 seconds O Set the input Previous disc Si CQ Sn Go to step E within 8 sec Ej Select the track number QO Input the track number Oooce ee i MOoOom d Set the input Start playback ENTER gt i e The disc number can be selected directly by using the DISC SELECTOR key and numeric keys in place of the DISC SKIP DOWN UP keys e When the disc corresponds to CD TEXT or when the disc title has been registered the disc title will be displayed with scrolling Discs can be selected by the disc title Registration of Title 20 elf you make a mistake press the CLEAR key and enter the disc No from the beginning Press the numeric keys in the following order Track No 8 8 Track No 14 1 4 Track No 20 2 0 eTo program the entire disc press the SET key without inputting the track number ALL will be displayed e Program other tracks in the desired order by repeating steps B and B e Up to 32 tracks can be programmed FULL is displayed when no more tracks can be programmed e f you make a mistake press the CLEAR key and restart from step B To check the programmed tracks va SPACE CHECK To add a track to the program O Set the CD player to stop mode Perform steps B and of Programming tracks i
30. l play TRACK mode O Press the MODE key MODE The display flashes Ta Select ALL INFORMATION DISC SKIP DOWN UP Ces gt Dise Track Title Disc and track titles Disc Track Artist Artist Set the input Dise Track Songwriter Songwriter A Disc Track Composer Composer ares Disc Track Arranger Arranger ee Disc Track Message Message from sponsor or artist ID INFO Recordcompany release date etc To jump to the next track orto return to the previous Genre INFO Genre information track during display CHARACTER DOWN UP Return EONS Jump eltems from to are displayed in the sequence of disc and track Ua e When there is no text information to be displayed is scrolled e e on the display To jump to the next item or to return to the previous ein the case of a non CD TEXT disc the NO CD TEXT display will item during display appear for approx 3 seconds DISC SKIP OWN UP To end ALL INFORMATION during display Return a Jump Press the MODE key Ca 16 Programming tracks in desired order PGM mode Use the following procedure to select desired tracks up to 32 tracks from different discs and program them in the desired order Preparation e Set the CD player to stop mode Press so that the PGM indicator lights CHARAC P MODE AN a 2 Select the disc O Select the d
31. lose the door panel 11 eCheck that the unit is in the normal play TRACK mode 13 RR Registration of user file USER FILE SET mode Activate the user file set mode 25 QO Press the MODE key MODE Select USER FILE DISC SKIP DOWN UP a Select USER FILE SET DISC SKIP OWN UP Ces No 2 Select the desired user file eWhen the MODE key is pressed during USER FILE SET mode the USER FILE SET mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes The display flashes DISC SKIP DOWN UP Previous Sa Next file file C Ej Select the desired disc Each press switches the modes as follows USER FILE 1 USER FILE 2 USER FILE 3 gt USER FILE 4 gt USER FILE 5 USER FILE 6 USER FILE 7 gt USER FILE 8 elf user file names have already been registered their names are displayed in place of the above Assigning user file names 27 DISC SKIP DOWN UP Previous QI net disc disc Ue SET e The disc number can be selected directly by using the numeric keys in place of the DISC SKIP DOWN UP keys eRepeat step G if it is required to register another disc in the user file selected above eTo register another user file exit the USER FILE SET mode once
32. ly if condensation occurs In this case leave the unit for a few hours with the power left ON and restart the poeration after the condensation has dride up Be specially cautious against condensatin in a following circumsatance When this unit is carried from a place to another across a large difference in temperature when the humidity in the room where this unit is installed increases etc Note related to transportation and movement Before transporting or moving this unit carry out the following op eration 1 Remove all discs from the carousel and close the door panel 2 Confirm that the flashing NO DISC display has changed to steady ighting and then switch off the power 3 Wait a few seconds then disconnect the power plug Memory backup function Stored contents for at least Power status ON or OFF 3 weeks after power plugis Title registration contents unplugged from the AC out Music type registration contents let User file registration contents Best selection registration contents As an ENERGY STAR Partner Kenwood Corpora es tion has determined that this products meets the brevet ENERGY STAR guidelines for energy efficiency This product can save energy Saving energy re duces air pollution and lowers utility bills In case of difficulty Operation to reset The microcomputer may malfunction impossibility to operate erroneous displa
33. n e Close the door panel ei To change or delete a title Perform steps and B of Assigning Title 20 LSA 2 Change or delete characters one by one Change O Move the cursor to the desired character to be changed CURSOR LEFT RIGHT a Select a character CONFIRM SELECTION REPEAT RANDOM DISPLAY 1 2 3 4 o Co 5 6 7 8 COO 9 o 10 100 COW amp RAL S 7 5 Co Co SELECTOR C Delete the unnecessary character See Deletion Deletion Move the cursor to the desired character to be deleted OR LEFT RIGH on Press the DELETE key DELETE CLEAR Yi X Ej Execute title change or deletion ENTER No Registration of Title e Call the disc to be changed e Deletion mode is cancelled when the MODE key is pressed ay ae Cab Move with the CURSOR LEFT RIGHT keys gt elf the title to be changed is too long to be displayed on the display section press the CURSOR LEFT RIGHT keys to scroll the display so that the characters hidden until then appear ee SS s7 gt S AN i Flashing cursor e f a desired character is not provided on the remote control keys input the character as follows Press the CHARACTER DOWN UP keys or rotating the DISC SKIP knob until the desired character is displayed in the flashing cursor position Then press the SET key
34. n desired order 16 To change a track in the program O Set the CD player to stop mode Press the CHECK key SPACE CHECK a YC Perform steps B and of Programming tracks in desired order 76 To clear tracks from the program To clear tracks from the end DELETE CLEAR cee Nao XM e Each time the key is pressed the last track in the program is cleared e The tracks which are programmed earlier than the track being played cannot be cleared Programming tracks in desired order PGM mode 17 e Each time the key is pressed the program No and the disc No are displayed e The previous display resumes in a few seconds eWhen a track No is entered the track will be added to the end of the existing program ePress the CHECK key repeatedly until the program No to be changed is displayed Ea Example 4 e Press it while the PGM01 indicator blinks e The track being played cannot be changed To clear all tracks CHARAC 7P MODE ae No XQ S e When the P MODE key is pressed during playback playback in order of tracks starts from the track being played 18 Repeated playback REPEAT mode To repeat only the desired tracks a O Program the desired tracks by performing steps to E of Programming tracks in desired order ARR Switch REPEAT ON R
35. nel is closed The display flashes When there are discs for which the disc information already has been read in there may be no display Do not move or exchange discs until the disc information has been read in Ej Enter the disc title CONFIRM BEST SELECTION REPEAT RANDOM DISPLAY 1 2 3 4 nes CK 5 6 7 8 Cw 9 Oo 10 100 C DISC SELECTOR l Store the disc title ENTER gt i Registration of Title 21 One character is set and the cursor goes to the next digit e Repeat this to enter the disc name e f a desired character is not provided on the remote control keys input the character as follows Press the CHARACTER DOWN UP keys or rotating the DISC SKIP knob until the desired character is displayed in the flashing cursor position Then press the SET key RA 7T Flashing cursor To change the character type The type of characters which can be entered is switched each time the CHARAC key is pressed gt CHARAC P MODE X J e To register the disc name of another disc repeat the entire procedure from step B for it To quit TITLE INPUT mode Press the MODE key ae aag 1 0 Capital letters ABC XYZ NI gt S Numbers symbols 0 1 2 3 789 space amp 1 lt gt 22 Preparatio
36. o dirty e Disc is cracked e The connection cords are inserted loosely Insert disc properly gt eLeave the player for about 1 hour so tha condensation is removed 24 e Wipe off the dust on the disc surface referring to Disc handling precautions gt e Replace the disc with a new one e Connect all connection cords firmly L3A L6_ Music is interrupted Sound is skipped e Disc is too dirty e Disc is cracked e Oscillation is applied to this unit e Wipe off the dust on the disc surface referring to Disc handing precautions 34 e Replace the disc with a new one e Try selecting a place where no strong vibra tions occur by changing the installation place etc Disc selection is not possible e RANDOM mode or BEST SELECTION mode is selected eMISIC TYPE PLAY mode or USER FILE PLAY mode is selected ePress the m key to quit RANDOM mode or BEST SELECTION mode 19 32 ePress the MODE key to quit MUSIC TYPE PLAY mode or USER FILE PLAY mode gt gt ARR Disc begins to play when power is switched ON e The TIMER PLAY switch is set to ON eSet the TIMER PLAY switch to OFF unless timer playback is required 83 35 Specifications Format Laser System 225 28 ena Nai Compact disc digital audio system Wave length irienna aaaea ananasa akarian 760 nm 800 nm Lasetti aaia diaaa Semiconductor laser Laser power class ccccccceecs
37. porary Christian Country Dance gt Easy Listening Folk Gospel Hip Hop gt Jazz gt Latin gt Musical gt New Age Opera gt Operetta Pop Music gt RAP Reggae Rock Music Rhythm amp Blues Sound Effects Sound Track Spoken Word World Music e f there is no disc registered in the specified music type NO ENTRY will be displayed To quit M TYPE SEARCH mode Press the MODE key To play the searched disc SET tor Yi es If disc is searched while the door panel is left open the carousel rotates to move the search target disc on the front If the search target disc Note is being played DXXX BUSY is displayed Disc search DISC SEARCH mode Preparation e Register user file 25 31 eCheck that the unit is in the normal play TRACK mode 13 RR Searching the user file v FILE SEARCH mode The discs registered in the specified user file can be searched in sequence Activate the user file search mode eWhen the MODE key is pressed during U FILE SEARCH mode the Press the MODE key U FILE SEARCH mode is cancelled MODE Select DISC SEARCH Each press switches the modes as follows MUSIC TYPE ponse SKIP En USER FILE cm DISC SEARCH TITLE INPUT a ALL DATA READ So ALL INFORMATION The display flashes Select U FILE SEARCH DISC SKIP DOWN UP Ce
38. res Ta The display flashes el ii 2 Select the user file to be searched Each press switches the modes as follows USER FILE 1 USER FILE 2 USER FILE 3 gt USER FILE 4 gt USER FILE 5 USER FILE 6 USER FILE 7 gt USER FILE 8 DISC SKIP DOWN UP Gers elf user file names have already been registered their names are displayed in place of the above ot ce ie Ve Assigning user file names 27 No e f there is no disc registered in the specified user file NO ENTRY will be displayed To quit U FILE SEARCH mode J Press the MODE key To search the next disc To play the searched disc DISC SKIP DOWN UP Aa If disc is searched while the door panel is left open the carousel rotates to move the search target disc on the front If the search target Note disc is being played DXXX BUSY is displayed 32 Listening to your favorite titles BEST SELECTION mode You can select only your favorite titles and register them as the best selection Use the following procedure to reg ister favorite tracks in the best selection file while playing a CD Registration of best selection file Play the track to be registered ENTER CA XX 2 Register it in the best selection file f gt BEST SELECTION D s Register other favorite tracks by performing steps and for each of them Playing the best selec
39. sequence Activate the character search mode Press the MODE key MODE Ve Select DISC SEARCH DISC SKIP DOWN uP aa Oa Select CHARAC SEARCH DISC SKIP DOWN UP SET Ca a Input the initial letter of the disc title to be eWhen the MODE key is pressed during CHARAC SEARCH mode the CHARAC SEARCH mode is cancelled Each press switches the modes as follows MUSIC TYPE USER FILE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION The display flashes The display flashes searched gt 5 SELECTION REPEAT RANDOM C D CO COO MOHoOo me ET k R fen XQ To search the next disc DISC SKIP DOWN UP Ca When initial letter A is selected e The initial letters of disc titles are searched insensitively to the upper case and lowercase e Lowercase characters cannot be input in the CHARAC SEARCH mode e f a desired character is not provided on the remote control keys input the character as follows Press the CHARACTER DOWN UP keys or rotating the DISC SKIP knob until the desired character is displayed in the flashing cursor position Then press the SET key e The type of characters which can be entered is switched each time the CHARAC key is pressed e The disc titles beginning the specified character will be scrolled in the display elf there is no disc title
40. tem Loading batteries The keys with the same name as those on the main unit operate the same way as on the main unit The keys marked are provided only on the remote control unit O Input keys for numbers and letters Used for selection of disc numbers and track numbers as well as for character input POWER 1 key Keys related to playback mode and display CONFIRM key BEST SELECTION key Used for best selection registration and playback REPEAT key RANDOM key DISPLAY key Disc selection keys DISC SELECTOR key Press to select a disc number DISC SKIP DOWN UP keys Keys for basic operation and char acter input Stop m key ENTER Play pause gt t key CHARACTER DOWN UP Skip lt gt keys CURSOR LEFT RIGHT Search lt lt keys Press to move the played position of disc at high speed Used as cursor keys at the time of character input O Keys related to program and file registration MODE key Press to switch the mode SET key Used for confirmation of mode settings At he time of character input one character is confirmed and the cursor goes to the next digit ENTER key Used for title confirmation CHARAC P MODE key Used for playback mode switching At the ime of character input this key switches between capital letters small letters num bers and special characters SPACE CHECK key Used to confirm the entered contents
41. ter flashes on the display You can also use the CHARACTER DOWN UuP to select characters After selecting each character press SET to enter it KENWOOD 2 Press SET The display reads 9 Press ENTER The display reads _ then the disc number you selected will flash 3 Press SET again The dis play will stop flashing and will change to the alpha numeric character dis play DELETE SPACE CHARAC CLEAR CHECK P MODE ENTER C L CHARACTER DOWN UP 4 Use the character keys to select characters REMOTE CONTROL UNIT G you make a mistake RC P0714 use DELETE CLEAR to erase your last entry 6 Use sPacE cHeck to en ter Spaces 7 Use cCHARAC P MODE to shift between capital let ters lowercase letters and numbers symbols System connections Make connections as shown below When connecting the related system components refer also to the instruction manuals of the related components Do not plug in the power lead until all connections are com pleted Be sure to use this unit placed on a level surface Audio cord Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly reset the microcomputer referring to In case of difficulty gt YR Digital component MD DAT etc DIGITAL OUT qd OPTICAL
42. the player and store it in its case Discs which can be played with this unit CD 12 cm and the audio part of CDV CD G CD EG and CD EXTRA Use discs that comply with the IEC standard for example a disc carrying the iSe marking on the label surface An 8 cm CD cannot be played back Never play a cracked or warped disc During playback the disc rotates at high speed in the player Therefore to avoid danger never use a cracked or deformed disc or a disc repaired with tape or adhesive agent Please do not use discs which are not round because they may cause a malfunction Disc accessories The disc accessories stabilizer protection sheet protection ring etc which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction Maintenance of the unit When the front panel or case becomes dirty wipe with a soft dry cloth Do not use thinner benzine alcohol etc for these agents may cause discoloration In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction Be specially careful not to use contact cleaners containing oil for they may deform the plastic component Caution on condensation Condensation of dew may occur inside the unit when there is a great difference in temperature between this unit and the outside This unit may not function proper
43. tion file Preparation Set the CD player to stop mode eCheck that the unit is in the normal play TRACK mode Press the BEST SELECTION key BEST SELECTION D Ca To delete the registered best selection file r Q Play the track to be cleared O Press the CLEAR key DELETE CLEAR wr Only the track being played can be registered e Up to 32 tracks can be registered FULL is displayed when no more disc is acceptable e The tracks are played in the order they are registered Each time the CHECK key is pressed the disc numbers and track numbers are displayed in the order they are registered For repeated playback Press the REPEAT key to select REPEAT ON To quit BEST SELECTION mode Press the m key during playback e The recorded contents remain stored even when BEST SELECTION mode is quit e This is done during BEST SELECTION mode Timer operation As this unit incorporate the timer standby function play back can be started at desired moment if a commercially available audio timer is combined with this unit Preparation e Close the door panel 11 eConnect the system components so that their power can be switched on by the timer eRead the instruction manual of the timer carefully Set the power switches of the system compo nents to the ON positions 2 Select the disc to be played
44. turn the default names after clear Activate the user file clear mode Press the MODE key When the MODE key is pressed during USER FILE CLEAR mode the NODE USER FILE CLEAR mode is cancelled Ta Each press switches the modes as follows MUSIC TYPE O Select USER FILE USER FILE DISC SEARCH SET TITLE INPUT QN ALL DATA READ ALL INFORMATION DISC SKIP DOWN UP Ua The display flashes Select USER FILE CLEAR DISC SKIP DOWN UP a a The display flashes C 2 Select the user file to be deleted Select the user file to be deleted Each press switches the modes as follows USER FILE 1 USER FILE 2 USER FILE 3 USER FILE 4 gt USER FILE 5 USER FILE 6 USER FILE 7 USER FILE 8 Ce elf user file names have already been registered their names are AD Cy displayed in place of the above Previous file es file No Ta The display flashes DISC SKIP DOWN UP O Set the input To quit USER FILE CLEAR mode Press the MODE key Disc search DISC SEARCH mode Preparation einput the title 20 eCheck that the unit is in the normal play TRACK mode 73 RR Searching a disc by the disc title cHARAC SEARCH mode By inputting the initial letter of the desired disc title discs which have the disc titles beginning with that character can be searched in
45. y etc when the connection cords are un plugged while power is ON or due to an external factor In this case execute the following method to reset the microcomputer To reset the registered contents The registered contents for title music type user file and best selection can be reset by the following procedure and return it to normal condition power cord into the socket again Unplug the power cord from the power socket and plug the socket again Unplug the power cord from the power socket and while holding the m key depressed plug the power cord into the Remote control unit Symptom Cause Remedy Remote control operation is not possible CD Player Symptom e Batteries are exhausted e The remote control unit is too far away from the main system controlling angle is too large or there is an obstacle in between Cause e Replace with new batteries 9 e Operate the remote control unit within_the controllable range gt RR Remedy No power is applied with the POWER key ON e Power plug is loosely connected eWith the power plug connected to the switched AC outlet of an amplifier the power of the amplifier is turned off nsert the power plug firmly to the AC outlet nsert the power plug to the wall AC outlet Sound is not heard with the key on e Disc is loose eCondensation occured on the optical lens unit e Disc is to
46. y track This fea ture may allow you to play CDs for long hours without getting tired of Check that the unit is in the normal play TRACK mode 43 2 Select discs To select one disc O Select the disc number DISC SKIP DOWN UP Previous disc en Next disc Na Start playback ENTER La Ye Select ONE DISC RANDOM RANDOM To select all discs Select ALL DISC RANDOM RANDOM To select another track in the middle of playing one CHARACTER OWN UP iai a For random music type 24 For random user file 19 e The disc number can be selected directly by using the DISC SELECTOR key and numeric keys in place of the DISC SKIP DOWN UP keys Each press switches the modes as follows ONE DISC RANDOM ALL DISC RANDOM RANDOM OFF e Each time a track ends the same operation as above is repeated and the track selected next is played e Random play stops after all of the tracks have been played once For repeated playback Press the REPEAT key to select REPEAT ON To cancel random playback S Select RANDOM OFF RANDOM Oa e Press the m key to stop playback e Normal playback will be performed when RANDOM OFF is selected 20 Registration of Title For discs not corresponding to CD TEXT a title can be given to the disc max 25 characters Operation is possible also
47. your hand or any object enter inside the unit Loading discs in the carousel Switch power ON Press the POWER key Main unit STANDBY POWER ON STANDBY Na No 2 Open the door panel toward the front Press PUSH OPEN at the right top e Do not place any object on the open door panel of the door panel Vxenwood a O Turn the DISC SKIP knob and bring the slot with the disc to be placed to the front The slot No is displayed when the DISC SKIP knob is turned Carousel Disc slot O Insert the disc vertically Insert CDs with the label side facing to ward your right N Insert discs with the label on the right side Playback is not oto possible when a disc is inserted the other way round e Do not insert more than one disc in a slot eWhen a disc not corresponding to CD TEXT is inserted searching for this disc will be facilitated when the title is registered at the time of disc insertion Insert one CD per slot all the way Registration of Title 20 Repeat and to insert discs Disc replacement Discs can be replaced with the same procedure as Loading discs in the carousel In stopped condition all discs can be exchanged However when the door panel is opened while DISC DETEC TION is being displayed it may not be possible to remove the disc which had been played Accord
Download Pdf Manuals
Related Search