Home

Kawasaki 840055 Drill User Manual

Contents

1. 2 16 PROTECTING THE ENVIRONMENT 16 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 17 1 SECTION FIVE 2 YEAR LIMITED 17 20 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer use only Your charger and or adapter has been designed for charging batteries of the type approved and supplied with this tool GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal inju
2. 16 17 1 SECTION FOUR MAINTENANCE AND CLEANING 17 18 ACCESSORIES e 18 SPECIFICATIONS c rette whack si edo Dobie a ta c 19 PROTECTING THE ENVIRONMENT 19 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 19 SECTION FIVE 2 YEAR LIMITED 19 22 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer use only Your charger and or adapter has been designed for charging batteries of the type approved and supplied with this tool GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and
3. e tics 4 SECTION TWO SAFETY RULES FOR WORKLIGHT 4 SYMBOLS oak rera eee Ee EXER qaqa paqqusaqaa pasa 5 SECTION THREE FUNCTIONAL DESCRIPTION 6 BATTERY odd bee manai a ura 7 9 REMOVING ATTACHING BATTERY 7 CHARGER cs as ayasa umu aa ass Kop Ao 8 CHARGING BATTERY PACK 9 OPERATING THE WORKLIGHT 9 11 OPERATING THE ON OFF SWITCH 10 ADJUSTING THE WORKLIGHT BEAM 10 REPLACING THE LIGHT BULB 10 11 SECTION FOUR MAINTENANCE AND CLEANING 11 AGGESSORIES caved ene e Ce Re ER ERE GE 12 SPECIFICATIONS is utate rari 12 PROTECTING THE ENVIRONMENT 12 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 13 SECTION FIVE 2 YEARLIMITEDWARRANTY e 13 16 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer u
4. 6 7 SAFETY RULES FOR CIRCULAR SAW 7 8 CAUSES AND PREVENTION OF KICKBACK 8 9 SYMBOLS EP aq 9 10 SECTION THREE FUNCTIONAL DESCRIPTION 10 BATTERY tbe bebe rst ren 12 14 REMOVING ATTACHING BATTERY PACK 13 CHARGER xoc bosse Re RE SER Mave sk ES 13 14 CHARGING BATTERY PACK 14 ASSEMBLY ix duce ru ER EUR ep VPE REESE 15 16 ATTACHING REMOVING BLADE 15 16 ADJUSTING THE DEPTH AND ANGLE 16 OPERATING THE CIRCULAR SAW 17 18 OPERATING TRIGGER SWITCH 17 GENERAL CUTTING 17 18 POCKET CUTTING iio sb 18 SECTION FOUR MAINTENANCE AND CLEANING 19 ACCESSORIES 2222 2 19 20 0 2222 20 PROTECTING THE ENVIRONMENT 20 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 20 1 SECTION FIVE 2 YEAR LIMITED WARRANIY 21 24 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product a
5. 19 2V BATTERY OPERATED CIRCULAR SAW INSTRUCTION MANUAL THS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TODO SOCOULD RESULT IN SERIOUS PERSONAL AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS CR EXPERIENCE A PROBLEM WTH YOUR ALLTRADE PRODUCT DO NOT RETURN THS PRODUCT TO THE STORE PLEASE CALL CUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL NO DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION CR COMMENT US A CALL OR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TO US TABLE OF CONTENTS CONGRATULATIONS 2 INTENDED USE 2 SECTION ONE GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS 2 RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 3 WORK AREA he mre eed heeded 4 ELECTRICAL SAFETY 4 PERSONAL SAEETY isse ede 5 TOOL USE AND CARE 5 6 SERVICE 2 a 6 SECTION TWO SPECIFIC SAFETY RULES AND OR SYMBOLS
6. FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMM ERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warranty Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIM
7. Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 24
8. OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 20 F0R CUSTOMER SERVICE P0UR LE SERVICE APR S VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICEN
9. authorized replacement parts Service or maintenance by unqualified personnel could result in considerable risk of personal injury Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury 11 ACCESSORIES Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experience a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table below RECOMM ENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G AMPERE 10FT 25FT 50FT 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 12 12 12 SPECIFICATIONS SPECIFICATIONS Voltage 19 2V Light Bulb Type Krypton 19 2V 0 6 A Charger Input 120V NJ 60Hz Charging Time Approx 3 Hours Battery Type Ni Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times At the end of their useful life recy cle batteries with due care for our environment Ni Cad and Ni MH batteries are recyclable Take
10. Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replace
11. BATTERY PACK show that charging is taking place 1 Press both release buttons on either sua ior CHARGING BATTERY PACK side of the Cordless ED Jigsaw to release the CHARGE BATTERY PACK BATTERY PACK battery pack 1 Make sure the trigger on the Cordless Jigsaw 4 is in the OFF position 120V AC gsaw BUTTON and remove the battery ADAPTER pack from the Cordless ATTACH BATTERY PACK Jigsaw 1 Align the raised portion of 2 Plug 120V AC Adapter the battery pack with the into household outlet groove in the battery compartment of the Cordless Jigsaw and into side of battery charger Insert battery pack into battery charger When the battery is placed 2 Press the battery pack into place Make sure the latches are securely fastened Do not use the Cordless Jigsaw if the battery pack is not seated properly BATTERY in the charger the red LED CHARGER CHARGER indicator light will remain on 3 When fully charged reattach battery pack onto Cordless Jigsaw WARNING Before using battery charger please read carefully all making certain latches fasten securely Cordless Jigsaw will not instructions and cautionary markings on battery charger battery pack and operate properly if the battery pack is not seated properly product using battery ASSEMBLY NOTE The charger will not automatically turn OFF when the battery pack is fully charged The charging indicator light will remain ON until th
12. DRILL DRIVERS CAUTION Always wear safety goggles or eye protection when using this tool Use a dust mask or respirator for applications which generate dust Do not grasp the tool or place your hands too close to the spinning chuck or drill bit Your hand may be lacerated or may cause injury Secure the material being worked on Never hold it in your hand or across your legs Unstable support can cause loss of control and injury Position yourself to avoid being caught between the tool or side handle and walls or posts Should the socket or bit become bound in the work the reac tion torque of the tool could crush your hand or leg Check to see that keys and adjusting wrenches are removed from the Cordless Drill before switching the tool ON Keys or wrenches can fly away at high velocity striking you or a bystander When using the Cordless Drill always maintain a firm grip on the tool with both hands Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator Keep the handle of the Cordless Drill dry clean and free from oil and grease Do not run the Cordless Drill while carrying it at your side A spinning sock et or bit could become entangled with clothing and injury may result Disconnect the plug or remove the battery pack from tool and place the switc
13. Start inside the area to be cut out Set the shoe against the work piece at an angle Lift the blade guard Pull the trigger to start the saw When the blade reaches full speed slowly feed the blade into the work piece When the blade starts cutting release the blade guard 18 MAINTENANCE AND CLEANING WARNING Always remove the battery pack before attempting cleaning or maintenance NOTE This Circular Saw is lubricated before it leaves the factory This lubrication should last for the life of the tool No further lubrication is required Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the casing Never immerse any part of the tool in a liquid Always keep the ventilation openings clear Always clean the battery pack using only a dry cloth Do not use liquids Always unplug the charger before cleaning it Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth Inspect all mounting screws regularly Tighten any loose screws Failure to keep the mounting screws tight could result in serious injuries Never open the Cordless Circular Saw case battery pack or charger Do not attempt to repair the Cordless Circular Saw battery pack or charger yourself Opening any of these parts will void your warranty ACCESSORIES Use only accessories that are recommended by the manufacturer for your model Accessories that may b
14. be controlled with the switch is dangerous and must be repaired Disconnect battery pack from tool or place the switch in the locked or OFF position before making any adjustments changing accessories or storing the tool Such preventative safety measures reduce the risk of starting the tool accidentally Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery termi nals together may cause burns or a fire Under abusive conditions liquid may be ejected from the battery avoid con tact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irrita tion or burns Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection fr
15. be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Alltrade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items such as drill bits screwdrivin
16. blade enters the material lower guard must be released For all other sawing the lower guard should operate automatically Always observe that the lower guard is covering the blade before placing saw down on bench or floor An unprotected coasting blade will cause the saw to walk backwards cutting whatever is in its path Be aware of the time it takes for the blade to stop after the switch is released NEVER hold piece being cut in your hands or across your leg It is important to support the work properly to minimize body exposure blade binding or loss of con trol Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator When ripping always use a rip fence or straight edge guide This improves the accuracy of the cut and reduces the chance for blade binding Always use blades with correct size and shape diamond vs round arbor holes Blades that do not match the mounting hardware of the saw will run eccentrically causing loss of control Never use damaged or incorrect blade washers or bolts The blade washers and bolts were specifically designed for your saw for optimum performance and safety of operation SAFETY RULES FOR CIRCULAR SAW CAUTION NEVER assume the blade has stopped just because the trigger has been released Blades may continue moving even afte
17. cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on corded products may expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling WARNING Keep your work area clean and well lit Cluttered work benches and dark work areas may cause accidents or injury Do not operate power tools in explosive areas such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distractions can cause you to lose control A WARNING Do not abuse the cord Never use the cord to carry the tool pulling or unplug ging the power tool Keep the cord away from heat oil sharp edges or mov ing parts Replace damaged cords immediately Damaged cords may create a fire Damaged or entangled cords increase the ri
18. date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on jobsite This warranty does not apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products 13 and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the packag
19. diminish 8 Dust Shroud 15 Metal Cutting Blade Severe heat is most destructive to a battery the more heat generated the faster 9 Blade Support Roller 16 Wood Cutting Blade the battery loses power A battery that gets too hot can have a shortened life Never over discharge a battery by using the tool even after tool performance COMPONENT MODEL NUMBER has decreased Do not attempt to discharge a tool s battery by continuing to BATTERY PACK 690071 pull on the tool trigger When tool performance begins to diminish stop the tool 120 AC ADAPTER 690040 and recharge the battery for optimal performance l I Charge battery pack at ambient temperatures between 50 F 104 F HEX WRENCH a Store tool and battery pack in locations where temperatures will not exceed BLADES 2 690097 120 F This is important to prevent serious damage to the battery cells The battery pack should always be recharged when the Cordless Jigsaw begins to run slowly When battery pack is not in use keep it away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals 9 together may cause sparks burns or fire REMOVING ATTACHING BATTERY PACK When the battery pack requires recharging a 3 5 hour charge allows the tool to operate at full power A charging indicator light on the charger will illuminate to REMOVE
20. feed the blade into the work piece until the blade is at full speed If the blade is not at full speed the saw may kick back causing serious personal injury NOTE Do not force the saw Excessive force may result in a broken blade Use only enough pressure to keep the saw moving through the work piece 17 Put on eye protection e Clear the saw of any foreign material Make sure the work piece is held securely in place Hold smaller pieces in a vise or attach to the workbench with clamps Mark out the line to be cut so it is easily visible Check the lower guard for damage If damaged do not use tool Always use the right blade for the material Make sure all bolts screws and locking levers are secure before starting tool Pull the trigger to start the saw Set the shoe against the work piece When the blade reaches full speed slowly feed the blade into the work piece When the blade starts cutting release the blade guard POCKET CUTTING WARNING If the blade binds release the trigger immediately Do not move the saw until the blade comes to a complete stop Find the cause of the binding before starting the saw again NOTE If the blade becomes pinched twisted misaligned or bound it will stall and lift up out of the work piece suddenly jerking back toward the operator This reaction is referred to as KICKBACK Mark out the line to be cut so it is easily visible e
21. have a shortened life Never over discharge a battery by using the tool even after tool performance has decreased Do not attempt to discharge a tool s battery by continuing to pull on the tool trigger When tool performance begins to diminish stop the tool and recharge the battery for optimal performance Charge battery pack at ambient temperatures between 50 F 104 F Store tool and battery pack in locations where temperatures will not exceed 120 F This is important to prevent serious damage to the battery cells The battery pack should always be recharged when the Cordless Circular Saw begins to run slowly When battery pack is not in use keep it away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause sparks burns or fire REMOVING ATTACHING BATTERY PACK CHARGING BATTERY PACK REMOVE BATTERY PACK anti BATTERY PACK BATTERY PACK 1 Press both release Make sure the trigger buttons on either on the Cordless Circular side of the Cordless Saw is in the OFF Circular Saw to release position and remove the the battery pack battery pack from the Cordless Circular Saw RELEASE Plug 120V AC Adapter BUTTON into household outlet and into side of battery charger Insert battery pack into battery charger When the battery is 120V AC ADAPTER
22. immersed in liquid Maintain labels and nameplates on the Worklight These carry important information If unreadable or missing contact Alltrade for a replacement FUNCTIONAL DESCRIPTION CAUTION Battery pack must be recharged only with the specified charger for the bat tery A charger that may be suitable for one type of battery may create a risk of fire when used with another battery Do not use in a damp or wet environment SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL EXPLANATION V Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second Watt Power CONTROLS AND COMPONENTS U z 1 Battery Pack 6 ON OFF Switch Kg Kilograms Weight U Alternating Current Type of Current 2 Release Buttons on Each Side 7 Reflector Rim Direct Current Type of Current Sk TAON AG ACCESSORIES avi Alternating or Direct Current Type of Current us _ f 8 Replacement Light bulb inside unit Earthing Terminal Grounding Terminal JLEG Charging Indicators E Class II Construction Denotes Double Insulation min Minutes Time S Seconds Time Diameter Size of Drill Bits BATTERY PACK 690506 Grinding Wheels etc 120V AC ADAPTER 690074 n No load speed No load Rotational Speed CHARGER 690071 Revolutions
23. of Cordless Drill ATTACH BATTERY PACK 1 Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Drill 2 Press the battery pack into place Make sure the latches are securely fastened Do not use BUTTON the Cordless Drill if the battery pack is not seated properly CHARGER WARNING Before using battery charger please read carefully all instructions and cautionary markings on battery charger battery pack and product using battery NOTE The charger will not automatically turn OFF when the battery pack is fully charged The charging indicator light will remain ON until the charger is disconnected from the electrical outlet Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Use only Alltrade approved chargers with your product Do not disassemble charger Do not use charger if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid The battery pack and charger heat during charging Place the charger on a flat non flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack 11 When the battery pack requires recharging a 3 5 hour charge allows the tool to operate at full power A charging indicator light on the charger wil
24. reach underneath the tool while the sanding disk is in motion Do not use your legs or feet to stabilize the work piece Position yourself to avoid being caught between the tool or side handle and walls or posts Should the socket or bit become bound in the work the reac tion torque of the tool could crush your hand or leg Always hold the tool by its insulated gripping surfaces when cutting in areas that may contain hidden live wiring If the blade makes contact with a live wire the metal parts of this tool may conduct enough electricity to seriously shock the user Contact with a live wire will make expased metal parts of the tool live and shock the operator Do not cut or break into existing walls or other blind areas Where electrical wiring may exist If this situation is unavoidable disconnect all fuses or circuit breakers feeding this worksite Do not run the Cordless Jigsaw while carrying it at your side A moving blade could become entangled with clothing and injury may result Disconnect the battery pack from tool and place the switch in the locked or OFF position before making any assembly adjustments changing acces sories performing any inspection maintenance or cleaning procedures Such preventive safety measures reduce the risk of starting the tool accidentally Do not use the Cordless Jigsaw if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid Do not u
25. straight and S NV accurate parallel cuts RIP FENCE LOCK KNOB This knob secures the rip fence in place 11 WARNING Before using battery pack please read carefully all instruc tions and cautionary markings on battery pack battery charger and product using battery Do not incinerate the battery pack even if it is severely damaged or is completely worn out The battery pack can explode Do not carry battery packs in aprons pockets or tool boxes product kit boxes drawers etc with loose metal objects Battery pack terminals could be short circuited causing damage to the battery pack severe burns or fire The battery pack is Nickel Cadmium Ni Cad and is considered to be a toxic material by the Environmental Protection Agency Before disposing of dam aged or worn out Ni Cad battery packs check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs take them to your local recycling center for proper disposal or call 1 800 822 8837 NOTE The battery is not fully charged Before first use the battery pack requires 8 10 hours charge time to be fully charged Subsequent recharging needs 3 hours for the battery to be fully charged Always switch to a fresh battery when tool performance begins to diminish Severe heat is most destructive to a battery the more heat generated the faster the battery loses power A battery that gets too hot can
26. the desired position Tighten the screws completely to hold the blade in place OPERATING THE JIGSAW 4 WARNING Never tape the trigger switch down to provide continuous high speed The tool may fail under such conditions causing fire or personal injury OPERATING THE ON OFF SWITCH Depress the lock on i LOCK ON button to one side BUTTON Press the trigger in to turn the Jigsaw and release the trigger to stop the Jigsaw TRIGGER SWITCH GENERAL CUTTING A WARNING Always hold the saw in front of you and away from your body Keep your hands and feet well away from the work piece Never feed the blade into the work piece until the blade is at full speed If the blade is not at full speed the saw may kick back causing serious personal injury NOTE Do not force the saw Excessive force may result in a broken blade Use only enough pressure to keep the saw moving through the Work piece Put on eye protection Clear the saw of any foreign material Make sure the work piece is held securely in place Hold smaller pieces in a vise or attach to the workbench with clamps Mark out the line to be cut so it is easily visible Pull the trigger to start the saw Set the shoe against the work piece When the blade reaches full speed slowly feed the blade into the work piece PLUNGE CUTTING WARNING Never feed the blade into the work piece until the blade is at full spe
27. them to your local recycling center or call 1 800 822 8837 Collected batteries will be recycled or disposed of properly 12 OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer Service Department at 1 800 590 3723 Cordless Drills Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi Purpose Tools Wide Range of Accessories and more 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The
28. tools Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may create a risk of injury when used on another tool SERVICE Tool service must be performed only by qualified repair personnel Service or maintenance by unqualified personnel may result in a risk of injury When servicing a tool use only identical replacement parts Follow instructions in the Maintenance section of this manual Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury SPECIFIC SAFETY RULES AND OR SYMBOLS CAUTION Hold tool by insulated gripping surfaces when per forming an operation where the cutting tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator SAFETY RULES FOR CORDLESS JIGSAWS CAUTION Always wear safety goggles or eye protection when using this tool Use a dust mask or respirator for applications which generate dust Secure the material being worked on Never hold it in your hand or across your legs Unstable support can cause loss of control and injury CAUTION When using the Cordless Jigsaw always maintain a firm grip on the tool with both hands Never put your hands or feet in the sanding area Do not grasp the toolor place your hands too close to the blade Keep your hands well away from the sanding disk Never
29. 2 Pull battery pack free of Cordless Circular Saw ATTACH BATTERY PACK 1 Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Circular Saw N BATTERY placed in the charger the CHARGER 2 Press the battery pack into place Make sure the latches are securely fastened red LED indicator light will remain on Do not use the Cordless Circular Saw if the battery pack is not seated properly When fully charged reattach battery pack onto Cordless Circular Saw making certain latches fasten securely Cordless Circular Saw will not operate properly if the battery pack is not seated properly WARNING Before using battery charger please read carefully all ASSEMBLY WARNING Always remove battery pack before installing or removing blade instructions and cautionary markings on battery charger battery pack and product using battery NOTE The charger will not automatically turn OFF when the When removing the blade from the tool avoid contact with skin and use proper protective gloves when grasping the blade or accessory Accessories may be hot after prolonged use battery pack is fully charged The charging indicator light will remain ON until the charger is disconnected from the electrical outlet Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Us
30. 2 12 12 18 SPECIFICATIONS SPECIFICATIONS Voltage 19 2V No Load Low Speed 0 400 min No Load High Speed 0 1100 min Torque Settings 2441 Drill Chuck Capacity Up to 10mm 3 8 Charger Input 120V N 60Hz Charging Time Approx 3 5 hours Battery Type Ni Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times At the end of their useful life recycle batteries with due care for our environment Ni Cad and Ni MH batteries are recyclable Take them to your local recycling center or call 1 800 822 8837 Collected batteries will be recycled or disposed of properly OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer Service Department at 1 800 590 3723 Cordless Drills Screwdrivers Reciprocating Saws Impact Wrenches Routers Sanders Rotary Tools Jigsaws Corded and Cordless Multi Purpose Tools Circular Saws Wide Range of Accessories and more Angle Grinders 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and one else all parts of the product except those parts referred to below which are specifically excluded from such wa
31. 296 f he e ER RR 2 SECTION ONE GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS 2 RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 3 WQORKAREA u S Reel RU a ERR a hawa 4 ELECTRICAL SAFETY o 2 n 4 PERSONAL SAFETY iii sce oa Do e RC e e ec icon 5 TOOL USE AND CARE 5 6 SERVICE ached wrest abet Dada ak I ER RUE RARO hapa RO Sapan upaya 6 SECTION TWO SPECIFIC SAFETY RULES AND OR SYMBOLS 6 SAFETY RULES FOR JIGSAWS 6 7 SYMBOLS cts iex dnd deeds ide deeft 8 SECTION THREE FUNCTIONAL 9 BATTERY PM 10 12 REMOVING ATTACHING BATTERY PACK 11 CHARGER zs sitet ER PR RP eR E dea 11 12 CHARGING BATTERY PACK 12 ASSEMBLY Su ss int a eret d ate do Med ricetta din 12 13 ATTACHING THE 12 13 OPERATING THE JIGSAW 13 15 OPERATING THE ON OFF SWITCH 13 GENERAL CUTTING 14 PLUNGE CUTTING 2 255 as teed e ew ts 14 METAL CUTTING 15 SECTION FOUR MAINTENANCE AND CLEANING 15 ACCESSORIES 2222222222222 2 16 SPECIFICATIONS
32. ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 16 F0R CUSTOMER SERVICE P0UR LE SERVICE APR S VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2008 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840055_19 2V Black Cordless Circular Saw_Rev 2 7 08 COMPONENT Kawasaki
33. Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair
34. BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR I
35. FOR CUSTOMER SERVICE P0UR LE SERVICE APR S VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2008 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840055 19 2V Cordless Drill Rev 2 7 08 COMPONENT Kawasaki dil 19 2V 2 SPEED BATTERY OPERATED DRILL INSTRUCTION MANUAL THS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE CF THS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TO DO SO GOULD RESULT IN SERIOUS PERSONAL IN URY AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT DO NOT RETURN THS PRODUCT TOTHE STORE PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL No DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GVE US A CALL OR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TOUS TABLE OF CONTENTS CONGRATULATIONS 2 INTENDED U
36. G Before using battery charger please read carefully all instructions and cautionary markings on battery charger battery pack and product using battery NOTE The charger will not automatically turn OFF when the battery pack is fully charged The charging indicator light will remain ON until the charger is disconnected from the electrical outlet Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Use only Alltrade approved chargers with your product Do not disassemble charger Do not use charger if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid The battery pack and charger heat during charging Place the charger on a flat non flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack When the battery pack requires recharging a 3 hour charge allows the tool to operate at full power A charging indicator light on the charger will illuminate to show that charging is taking place 8 CHARGING BATTERY PACK 1 BATTERY PACK BATTERY PACK Make sure the trigger on the Cordless Worklight is in the OFF position and remove the battery pack from the Cordless Worklight 2 Plug 120V AC Adapter into household outlet and into side of battery charger Insert battery pack into ba
37. MERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on jobsite This warranty does not apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF 17 Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810
38. Minute Revolutions Surface Speed Strokes etc per Minute 1 2 3 Ring Selector Settings Speed Torque or Position Settings WARNING Before using battery pack please read carefully all instruc tions and cautionary markings on battery pack battery charg er and product using battery Do not incinerate the battery pack even if it is severely dam aged or is completely worn out The battery pack can explode Do not carry battery packs in aprons pockets or tool boxes product kit boxes drawers etc with loose metal objects Battery pack terminals could be short circuited causing damage to the battery pack severe burns or fire The battery pack is Nickel Cadmium Ni Cad and is considered to be a toxic material by the Environmental Protection Agency Before disposing of dam aged or worn out Ni Cad battery packs check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs take them to your local recycling center for proper disposal or call 1 800 822 8837 NOTE The battery is not fully charged Before first use the battery pack requires 8 10 hours charge time to be fully charged Subsequent recharging needs 3 hours for the battery to be fully charged Always switch to a fresh battery when tool performance begins to diminish Severe heat is most destructive to a battery the more heat generated the faster the battery loses power A battery that gets too
39. N BATTERY WARNING Before using battery pack please read carefully all instruc tions and cautionary markings on battery pack battery charger and product using battery Do not incinerate the battery pack even if it is severely damaged or is completely worn out The battery pack can explode Do not carry battery packs in aprons pockets or tool boxes product kit boxes drawers etc with loose metal objects Battery pack terminals could be short circuited causing damage to the battery pack severe burns or fire The battery pack is Nickel Cadmium Ni Cad and is considered to be a toxic material by the Environmental Protection Agency Before disposing of dam aged or worn out Ni Cad battery packs check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these CONTROLS AND COMPONENTS battery packs take them to your local recycling center for proper disposal or 1 Battery Pack 10 Screws call 1 800 822 8837 2 Release Buttons on Each Side 11 Shoe Plate 3 120V AC Adapter 12 Allen Wrench 4 Charger 13 Comfort Rubber Grip The battery is not fully charged Before first use the battery pack requires 5 LED Charging Indicators 14 Snap Hook 8 10 hours charge time to be fully charged Subsequent recharging needs 3 5 6 ON OFF Trigger Switch hours for the battery to be fully charged 7 Lock on Button ACCESSORIES Always switch to a fresh battery when tool performance begins to
40. ONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China Kawasaki Kawasaki Motors Corp U S A OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2006 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840055_19 2V Black Cordless Jigsaw_Rev 8 22 06 COMPONENT Kawasaki 19 2V BATTERY OPERATED JIGSAW INSTRUCTION MANUAL THS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THIS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL IN URY AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WTH YOUR ALLTRADE PRODUCT DO NOT RETURN THS PRODUCT TOTHE STORE PLEASE CALL OUR CUSTOMER SERMCE DEPARTMENT Ar 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL No DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GIVE US A CALL CR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TOUS TABLE OF CONTENTS CONGRATULATIONS 2 INTENDED USE 222222544
41. Parts will void warranty 22 Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTA
42. S AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF 19 ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH
43. SE nie ETE ERR eH HERE RR qawaq 2 SECTION ONE GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS 2 RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 3 WORK AREA edere see eroi rete 4 ELECTRICAL SAFETY 4 PERSONAL SAFETY 5 TOOL USEAND GARE inei aa e de does 5 6 ld TET 6 SECTION TWO SPECIFIC SAFETY RULES AND OR SYMBOLS 7 SAFETY RULES FOR CORDLESS DRILL DRIVERS 7 SYMBOES 8 SECTION THREE FUNCTIONAL 9 BATTERY a ks 10 12 REMOVING ATTACHING BATTERY PACK 11 CHARGER 04 404 83 RR Co OR 11 CHARGING BATTERY PACK 12 ASSEMBLY rne e per pn aska ER i d ec 13 INSTALLING DRILL BIT INTO KEYLESS CHUCK 13 OPERATING THE DRILL uuu yu su lasa apk ada 13 17 VARIABLE SPEED TRIGGER SWITCH 14 FORWARD REVERSE AND TRIGGER LOCK LEVER 14 TORQUE SETTINGS 15 HIGH LOW SPEED GEAR SHIFTING 15 SCREWDRIVING 2 22222 2222222 22 2 2 16 DRILLING METAL cer cette E eet wasa eo s 16 DRILLING MASONRY 16 DRILLING WOOD sssssssee e 16 HINTS FOR OPTIMUM USE
44. SED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2006 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840055_19 2V Black Cordless Worklight_Rev 2 7 08 COMPONENT Kawasaki 19 2V BATTERY 0PERATED WORKLIGHT INSTRUCTION MANUAL THS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TODO SOCOULD RESULT IN SERIOUS PERSONAL AND OR PROPERTY DAMACE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WTH YOUR ALLTRADE PRODUCT DO NOT RETURN THS PRODUCT TO THE STORE PLEASE CALL CUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL NO DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GVE US A CALL OR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TO US TABLE OF CONTENTS CONGRATULATIONS 2 INTENDED USE RE RR AREE ER 2 SECTION ONE RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 3 BATTERY TOOL USE AND CARE 4 SERVICE 2
45. THE ABOVE 15 WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF
46. TION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS 23 REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE
47. TS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 22 F0R CUSTOMER SERVICE POUR LE SERVICE APR S VENTE OU DU C
48. WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warranty Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN
49. aintenance section of this manual Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury SPECIFIC SAFETY RULES AND OR SYMBOLS A DANGER Keep hands away from cutting area and blade Keep your second hand on auxiliary handle or motor housing If both hands are holding the saw they cannot be cut by the blade Keep your body positioned to either side of the saw blade but not in line with the saw blade KICKBACK could cause the saw to jump backwards See Causes and Prevention of Kickback Do not reach underneath the work The guard cannot protect you from the blade below the work Check lower guard for proper closing before each use Do not operate saw if lower guard does not move freely and close instantly Never clamp or tie lower guard into the open position If saw is accidentally dropped lower guard may be bent Raise the lower guard with the Retracting Handle and make sure it moves freely and does not touch the blade or any other part in all angles and depths of cut Check the operation and condition of the lower guard spring If the guard and the spring are not operating properly they must be serviced before use Lower guard may operate sluggishly due to damaged parts gummy deposits or a buildup of debris Lower guard should be retracted manually only for special cuts such as Pocket Cuts and Compound Cuts Raise lower guard by Retracting Handle As soon as the
50. ardous situation which if not avoided may result in minor or moderate injury CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on corded products may expose you to lead a chemical known to the St
51. ate of California to cause cancer and birth defects or other reproductive harm Wash hands after handling 4 WARNING Keep your work area clean and well lit Cluttered work benches and dark work areas may cause accidents or injury Do not operate power tools in explosive areas such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distractions can cause you to lose control ELECTRICAL SAFETY WARNING Do not abuse the cord Never use the cord to carry the tool Keep the cord away from heat oil sharp edges or moving parts Replace damaged cords immediately Damaged cords may create a fire A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery A charger that may be suitable for one type of battery may create a risk of fire when used with another battery Use battery operated tool only with specifically designated battery pack Use of any other batteries may create risk of fire PERSONAL SAFETY WARNING Stay alert watch what you are doing and use common sense when operat ing a power tool Do not use tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Dress properly Do not
52. ation CAUTION Do not look into light or see the source of light directly FORWARD REVERSE AND TRIGGER LOCK LEVER NOTE Be sure the trigger is released when changing the position of the lever Always store the tool in the LOCKED OFF position Always check the direction of the Cordless Drill s rotation before use TO SELECT THE DIRECTIONS OF ROTATION To select forward Cordless Drill rotation press the trigger lock from left to right flat against the Cordless Drill body To select reverse press the trigger lock lever in the opposite direction The center position locks the tool TORQUE SETTINGS NOTE To prevent damaging the tool or driving screw too deep into work piece release the trigger when you feel the clutch slip CONTROL RING THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE For light duty work use lower settings For heavy duty work use higher settings PROPER SETTING FOR DRIVING SCREWS 1 Set the ring on the lowest setting to begin 2 Try tightening the first screw If the drill drives smoothly proceed with the next screw 3 If the Drill s clutch slips increase the torque setting and try again until the Drill drives the screw without incident HIGH LOW SPEED GEAR SHIFTING FOR LOW SPEED SETTING Slide the switch on top of the Drill to Position 1 for high torque applications and driv ing screws FOR HIGH SPEED SETTING Sl
53. bulb is included inside the unit Unscrew the rim and carefully remove it from the light assembly 10 Remove the battery pack from the Worklight 2 Hold the top of the Worklight with one hand while twisting the rim in a counter clockwise direction with the other Continue turning until the rim comes loose REPLACEM ENT 3 Remove the bulb by turning it slightly and pulling it out of the bulb fitting Be careful not to damage the delicate parts inside the case 4 Insert the new bulb then carefully put the rim back in place and turn it clockwise to tighten it MAINTENANCE AND CLEANING WARNING Always remove the battery pack before attempting cleaning or maintenance Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the casing Never immerse any part of the tool in a liquid Always keep the ventilation openings clear Always clean the battery pack using only a dry cloth Do not use liquids Always unplug the charger before cleaning it Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth Never open the Worklight case battery pack or charger Do not attempt to repair the Worklight battery pack or charger yourself Opening any of these parts will void your warranty CAUTION Use only authorized replacement parts for your tool Equipment service must be performed only by qualified repair personnel using
54. cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury DANGER WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury WARNING CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to
55. d for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Alltrade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty 18 This limited warranty does not apply to accessory items such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE
56. e be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Allt
57. e charger is disconnected from the electrical outlet WARNING Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet Always turn the switch OFF and remove the battery pack before changing blades Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Use only Alltrade ATTACHING THE BLADE approved chargers with your product Do not disassemble charger A WARNING Do not use charger if it has been damaged left outdoors in the rain snow wet Always remove battery pack before installing or removing blade or damp environments or immersed in liquid When removing the blade from the tool avoid contact with skin and use The battery pack and charger heat during charging Place the charger on a flat proper protective gloves when grasping the blade or accessory Accessories non flammable surface away from flammable materials with at least four inches of may be hot after prolonged use clearance to allow proper air circulation around the charger and battery pack 11 12 1 Loosen the two screws on the blade holder by turning them counter clockwise Push the blade shank into the saw blade holder as far as it will go Make sure that the blade s teeth are facing forward TIGHTEN 2 Tighten the screws slowly first one side then the other until the blade reaches
58. e only Alltrade approved chargers with your product Do not disassemble charger Do not use charger if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid The battery pack and charger heat during charging Place the charger on a flat non flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack When the battery pack requires recharging a 3 hour charge allows the tool to operate at full power A charging indicator light on the charger will illuminate to show that charging is taking place 13 14 ATTACHING REMOVING BLADE If the blade clamp screw will not loosen enough to allow blade installation tap gently on the end of the wrench with a mallet until the clamp screw breaks free CLOCKWISE COUNTER CLOCKWISE ATTACHING THE BLADE 1 Remove the battery pack 2 Retract the lower guard see Fig 1 3 Slip the blade into place see Fig 2 4 Put clamp washers and clamping screw loosely in position Use the wrench tighten the clamping screw while pressing down on the clamping knob see Fig 3 and Fig 4 6 Remove wrench 7 Replace the battery pack REMOVING THE BLADE 1 Remove the battery pack 2 Use the wrench to loosen the clamping screw while pressing down on the blade safety lock button see Fig 3 and Fig 4 Remove t
59. e suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experi ence a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table on next page 19 RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS AMPERE 10FT 25 50FL 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 l 16 20 12 12 12 SPECIFICATIONS SPECIFICATIONS Voltage 19 2V Switch On Off Switch Charger Input 120V N 60Hz Charging Time Approx 3 5 hours No Load Speed RPM 3700 Min Blade Diameter o 140mm 5 1 2 Battery Type Ni Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times At the end of their useful life recycle batteries with due care for our environment Ni Cad and Ni MH batteries are recyclable Take them to your local recycling center or call 1 800 822 8837 Collected batteries will be recycled or disposed of properly OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer S
60. e the blade is in motion or KICKBACK may occur Investigate and take corrective actions to eliminate the cause of blade binding When restarting a saw in the work piece center the saw blade in the kerf and check that teeth are not engaged into the material If saw blade is binding it may walk up or KICKBACK from the work piece as the saw is restarted Support large panels to minimize the risk of blade pinching and KICKBACK Large panels tend to sag under their own weight Supports must be placed under the panel on both sides near the line of cut and near the edge of the panel Do not use dull or damaged blade Unsharpened or improperly set blades pro duce narrow kerf causing excessive friction blade binding and KICKBACK Blade depth and bevel adjusting locking levers must be tight and secure before making cut If blade adjustment shifts while cutting it will cause bind ing and KICKBACK Use extra caution when making a Pocket Cut into existing walls or other blind areas The protruding blade may cut objects that can cause KICKBACK SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL NAME EXPLANATION V Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second W Watt Power Kg Kilograms Weight No Alternating Current Type of Current Direct Cur
61. e tool No further lubrication is required Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the casing Never immerse any part of the tool in a liquid Always keep the ventilation openings clear Always clean the battery pack using only a dry cloth Do not use liquids Always unplug the charger before cleaning it 17 Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth Never open the Cordless Drill case battery pack or charger Do not attempt to repair the Cordless Drill battery pack or charger yourself Opening any of these parts will void your warranty ACCESSORIES Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experi ence a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table on next page RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G AMPERE 10FT 25FT 50FT 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 1
62. eated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on corded products may expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE 3 WARNING Keep your work area clean and well lit Cluttered work benches and dark work areas may cause accidents or injury Do not operate power tools in explosive areas such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distractions can cause you to lose control WARNING Do not abuse the cord Never use the cord to carry the tool Keep the cord away from heat oil sharp edges or moving parts Replace damaged cords immediately Damaged cords may create a fire A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery A charger that may be suitable for one type of battery may create a risk of fire when used with another battery Use batte
63. ed If the blade is not at full speed the saw may kick back causing serious personal injury Mark out the line to be cut so it is easily visible Start inside the area to be cut out Depress the lock on button and press the trigger to start the saw Set the shoe against the work piece When the blade reaches full speed slowly feed the blade into the work piece 14 METAL CUTTING WARNING Never use gasoline or any flammable liquid as a lubricant Sparking from the motor may cause it to ignite into flames When cutting metals other then copper brass or aluminum always use a lubricant such as cutting oil to keep the blade cool This will prolong the life of the blade as well as speeding up the cutting process Make sure the work piece is held securely in place Hold smaller pieces such as pipe or conduit in a vise or attach to the workbench with clamps To eliminate vibration always cut close to the clamping point When cutting thin sheets of metal place a piece of plywood on either side to control vibration and prevent tearing MAINTENANCE AND CLEANING WARNING Always remove the battery pack before attempting cleaning or maintenance NOTE This Cordless Jigsaw is lubricated before it leaves the factory This lubrication should last for the life of the tool No further lubrication is required Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the ca
64. ervice Department at 1 800 590 3723 Cordless Drills Screwdrivers Angle Grinders Impact Wrenches Reciprocating Saws Sanders Routers Jigsaws Rotary Tools Circular Saws Corded and Cordless Multi Purpose Tools Wide Range of Accessories and more 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to 0riginal Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on a jobsite This warranty does no
65. for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on corded products may expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling BATTERY TOOL USE AND CARE A WARNING Ensure the switch is in the off position before inserting battery pack Inserting the battery pack into power tools that have the switch o
66. g bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warranty Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE
67. g the work by hand or against your body is unstable and may lead to loss of control Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not use the tool if the power switch does not turn it ON or OFF A tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect battery pack from tool or place the switch in the locked or OFF posi tion before making any adjustments changing accessories or storing the tool Such preventative safety measures reduce the risk of starting the tool accidentally Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users CAUTION When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery termi nals together may cause sparks burns or a fire Maintain tools with care Keep cutting tools sharp and clean Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tool s operation If damaged have the tool serviced before using Many accidents are caused by poorly maintained
68. h in the locked or OFF position before making any assembly adjustments changing accessories performing any inspection maintenance or cleaning procedures Such preventive safety measures reduce the risk of starting the tool accidentally Do not use the Cordless Drill if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid Maintain labels and nameplates on the Cordless Drill These carry important information If unreadable or missing contact Alltrade for a replacement SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL NAME EXPLANATION V Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second W Watt Power Kg Kilograms Weight No Alternating Current Type of Current Direct Current Type of Current T Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal n Class 11 Construction Denotes Double Insulation min Minutes Time S Seconds Time j Diameter Size of Drill Bits Grinding Wheels etc n No load speed No load Rotational Speed Revolutions Minute Revolutions Surface Speed Strokes etc per Minute 1 2 3 Ring Selector Settings Speed Torque or Position Settings FUNCTIONAL DESCRIPTION BATTERY A WARNING Before using battery
69. he blade Tighten the blade clamp screw back into place e Remove wrench ge Replace the battery pack ADJUSTING DEPTH AND ANGLE KNOB ADJUST CUTTING DEPTH 1 Remove the battery pack 2 Hold the saw firmly and loosen the depth adjustment knob by turning it counter clockwise 3 Move the shoe to obtain the desired depth of cut 4 Tighten depth adjustment knob securely by turning clockwise before operating the saw ADJUST BEVEL ANGLE 1 Remove the battery pack 2 Loosen the bevel angle knob by turning it counter clockwise 3 Adjust the angle of your cut 4 Tighten the angle knob securely by turning clockwise OPERATING THE CIRCULAR SAW WARNING Never tape the trigger switch down to provide continuous high speed The tool may fail under such conditions causing fire or personal injury The lock off button helps prevent accidental starting This button can be pressed from either side OPERATING THE TRIGGER SWITCH THIS TOOL IS CONTROLLED BY A LOCK OFF BUTTON TRIGGER SWITCH TRIGGER SWITCH Press the lock off button then pull the ON OFF trigger to turn the Circular Saw ON To turn the Circular Saw OFF release the trigger switch The lock off button will automatically reset GENERAL CUTTING WARNING Always hold the saw in front of you and away from your body Keep your hands and feet well away from the work piece Never
70. he more heat generated the faster 6 10mm 3 8 Keyless Chuck 13 Led Light the battery loses power A battery that gets too hot can have a shortened life 7 24 1 Adjustable Torque Settings Never over discharge a battery by using the tool even after tool performance Control Ring ACCESSORIES has decreased Do not attempt to discharge a tool s battery by continuing to 8 Forward Reversing and 14 Double Ended Screwdriver Bits 2 pull on the tool trigger When tool performance begins to diminish stop the tool Trigger Lock Lever and recharge the battery for optimal performance Charge battery pack at ambient temperatures between 50 F 104 F COMPONENT MODEL NUMBER Store tool and battery pack in locations where temperatures will not exceed BATTERY PACK 691235 120 F This is important to prevent serious damage to the battery cells 120V AC ADAPTER 690074 The battery pack should always be recharged when the Cordless Drill begins to CHARGER 690072 run slowly 10mm 3 8 KEYLESS CHUCK 690076 When battery pack is not in use keep it away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals 9 together may cause sparks burns or fire REMOVING ATTACHING BATTERY PACK REMOVE BATTERY PACK 1 Press both release buttons on either side of the Cordless Drill to release the battery pack 2 Pull battery pack free
71. hot can have a shortened life Never over discharge a battery by using the tool even after tool performance has decreased Do not attempt to discharge a tool s battery by continuing to pull on the tool trigger When tool performance begins to diminish stop the tool and recharge the battery for optimal performance Charge battery pack at ambient temperatures between 50 F 104 F Store tool and battery pack in locations where temperatures will not exceed 120 F This is important to prevent serious damage to the battery cells The battery pack should always be recharged when the Cordless Worklight begins to dim When battery pack is not in use keep it away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause sparks burns or fire REMOVING ATTACHING BATTERY PACK REMOVE BATTERY PACK 1 Press both release buttons on either side of the Cordless Worklight to release the battery pack 2 Pull battery pack free of Cordless Worklight ATTACH BATTERY PACK 1 Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Worklight 2 Press the battery pack into place Make sure the latches are securely fastened Do not use the Cordless Worklight if the battery pack is not seated properly RELEASE T BUTTON WARNIN
72. ide the switch to Position 2 for light duty projects LOW SPEED HIGH SPEED SCREWDRIVING WHEN DRIVING FASTENERS Always start slowly and gradually increase the speed of the Drill Release the trigger when you feel the clutch slip Always keep the driver bit straight to prevent damage to the screw Hold the Drill with both hands to ensure control if the bit should stick or slip To prevent wood from splitting drill pilot holes into the wood before driving in the screws DRILLING METAL WHEN DRILLING HARD METALS Apply a lubricant such as cutting oil to the tip of the bit e Start with a small hole then enlarge to the required size Make sure the bit is actually cutting and not spinning in the hole as this will dull the edges of the bit Keep enough pressure on the bit to keep it drilling through the material DRILLING MASONRY WHEN DRILLING M ASONRY Masonry can be brittle so be careful not to apply too much pressure and crack the material Apply enough pressure to keep the bit cutting and not spinning in the hole as this will dull the edges of the bit Bricks and similar soft materials will require less pressure concrete will require much more DRILLING WOOD Use twist bits to drill holes in wood Make sure the bits are sharp Pull the bits out of the hole frequently to clear chips from the flutes as an overburdened bit may overheat HINTS FOR OPTIMUM USE DRILLING Keep the right amou
73. l illuminate to show that charging is taking place CHARGING BATTERY PACK CHARGE BATTERY PACK 1 Make sure the trigger on the Cordless Drill is in the OFF position and remove the battery pack from the Cordless Drill Plug 120V AC Adapter into household outlet and into side of battery charger Insert battery pack into battery charger When the battery is placed in the charger the red LED BATTERY indicator light will remain on CHARGER When fully charged reattach battery pack onto Cordless Drill making certain latches fasten securely Cordless Drill will not operate properly if the battery pack is not seated properly ASSEM BLY WARNING Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet Always turn the switch OFF and remove the battery pack before changing bits INSTALLING DRILL BIT INTO KEYLESS CHUCK A WARNING Before inserting a drill bit or other accessory make sure the forward reverse and trigger lock lever is in the center OFF position to prevent accidental starts that may result in injury Do not attempt to tighten drill bits or any other accessory by gripping the front of the chuck and turning the tool on This may cause personal injury and or damage to the chuck When removing the bit from the tool avoid contact with skin and use proper protective gloves
74. mm Charger Input 120V N 60Hz Charging Time Approx 3 5 hours Battery Type Ni Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times At the end of their useful life recycle batteries with due care for our environment Ni Cad and Ni MH batteries are recyclable Take them to your local recycling center or call 1 800 822 8837 Collected batteries will be recycled or disposed of properly OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer Service Department at 1 800 590 3723 Cordless Drills Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi Purpose Tools Wide Range of Accessories and more 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase SPECIAL WARRANTY NOTE TO CONTRACTORS AND COM
75. n invites acci dents Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery termi nals together may cause burns or a fire Under abusive conditions liquid may be ejected from the battery avoid con tact If contact accidentally occurs flush with water If liquid contacts eyes oEnviuc CAUTION Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the mem RI TW PAR WARI LAL VA LII AVERY IVN VVAV pb INLIMHI I CAUTION Use battery operated tool only with specifically designated battery pack Use of any other batteries may create risk of fire Keep the handle of the Worklight dry clean and free from oil and grease Do not run the Worklight while carrying it at your side The worklight heats up immediately when in use and could result in burns Do not usethe Worklight if it has been damaged left outdoors in the rain snow wet or damp environments or
76. nd our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer use only Your charger and or adapter has been designed for charging batteries of the type approved and supplied with this tool GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS 4 WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury DANGER WARNING WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury CAUTION CAUTION indicates a potentially haz
77. nt of pressure in a straight line with the drill bit Too little and the bit will spin without cutting too much and the motor may stall 16 Just before the drill tip breaks though the other side of the work piece drill more slowly and decrease pressure on the tool This will prevent stalling and leave a cleaner hole Use a block of wood to back up work pieces that may splinter Use spade bits when drilling large diameter holes in wood Use HSS drill bits when drilling in metal Use masonry bits when drilling in soft masonry Use a lubricant when drilling metals other than cast iron aluminum copper and brass When drilling start the hole slowly allowing the bit to drill deep enough to prevent slipping at higher speeds Never try to start a stalled Drill by clicking the trigger switch ON and OFF This may damage your tool To reduce jamming always keep the Drill running when pulling the bit out of a finished hole SCREWDRIVING Always use the correct type and size of screwdriver bit If screws are difficult to tighten try applying a small amount of washing liquid or soap as a lubricant Always hold the tool and screwdriver bit in a straight line with the screw MAINTENANCE AND CLEANING WARNING Always remove the battery pack before attempting cleaning or maintenance NOTE This Cordless Drill is lubricated before it leaves the factory This lubrication should last for the life of th
78. om one terminal to another Shorting the battery termi nals together may cause sparks burns or a fire Maintain tools with care Keep cutting tools sharp and clean Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tool s operation If damaged have the tool serviced before using Many accidents are caused by poorly maintained tools Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may create a risk of injury when used on another tool CAUTION Tool service must be performed only by qualified repair personnel Service or maintenance by unqualified personnel may result in a risk of injury When servicing a tool use only identical replacement parts This will ensure that the safety of the power tool is maintained Follow instructions in the Maintenance section of this manual Use of unauthorized parts or failure to fol low Maintenance Instructions may create a risk of shock or injury SPECIFIC SAFETY RULES AND OR SYMBOLS CAUTION Holdtool by insulated gripping surfaces when per forming an operation where the cutting tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator SAFETY RULES FOR CORDLESS
79. oving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accidental starting Be sure switch is in the locked or OFF position before inserting battery pack Carrying power tools with your finger on the switch or insert ing battery pack into a tool with the power switch ON invites accidents Remove adjusting keys or wrenches before turning the tool ON A wrench or a key that is left attached to a rotating part of the tool may result in personal injury Do not overreach Keep proper footing and balance at all times Proper foot ing and balance enable better control of the tool in unexpected situations Use safety equipment Always wear eye protection Dust mask non skid safe ty shoes hard hat or hearing protection must be used for appropriate conditions If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of these devices can reduce dust related hazards TOOL USE AND CARE CAUTION Use clamps or other practical ways to secure and support the workpiece to a stable platform Holding the work by hand or against your body is unstable and may lead to loss of control Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not use the tool if the power switch does not turn it ON or OFF A tool that cannot
80. pack please read carefully all instruc tions and cautionary markings on battery pack battery charger and product using battery Do not incinerate the battery pack even if it is severely damaged or is completely worn out The battery pack can explode Do not carry battery packs in aprons pockets or tool boxes product kit boxes drawers etc with loose metal objects Battery pack terminals could be short circuited causing damage to the battery pack severe burns or fire The battery pack is Nickel Cadmium Ni Cad and is considered to be a toxic material by the Environmental Protection Agency Before disposing of dam aged or worn out Ni Cad battery packs check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs take them to your local recycling center for proper disposal or call 1 800 822 8837 CONTROLS AND COMPONENTS NOTE 1 Battery Pack 9 High Low Speed Switch The battery is not fully charged Before first use the battery pack requires 2 Release Buttons on Each Side 10 Variable Speed Controlled 8 10 hours charge time to be fully charged Subsequent recharging needs 3 5 3 120V AC Adapter Trigger Switch hours for the battery to be fully charged 4 Charger 11 Accessory Bit Holder Always switch to a fresh battery when tool performance begins to diminish 5 LED Charging Indicator 12 Comfort Rubber Grip Severe heat is most destructive to a battery t
81. r place the switch in the locked or OFF posi tion before making any adjustments changing accessories or storing the tool Such preventative safety measures reduce the risk of starting the tool accidentally Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users CAUTION When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery termi nals together may cause sparks burns or a fire Maintain tools with care Keep cutting tools sharp and clean Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tool s operation If damaged have the tool serviced before using Many accidents are caused by poorly maintained tools Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may create a risk of injury when used on another tool CAUTION Tool service must be performed only by qualified repair personnel Service or maintenance by unqualified personnel may result in a risk of injury When servicing a tool use only identical replacement parts Follow instruc tions in the M
82. r the motor stops Always wear safety goggles or eye protection when using this tool Use a dust mask or respirator for applications which generate dust This saw may throw up debris that could lodge in the eyes causing severe pain or injury Inspect the bolts and blade washers before each use Damaged or incorrect bolts or blade washers can cause injury CAUTION When using the Circular Saw always maintain a firm grip on the tool with both hands Never put your hands or feet in the cutting area Do not grasp the tool or place your hands too close to the blade Keep your hands well away from the blade Never reach underneath the tool while the blade is in motion Do not use your legs or feet to stabilize the work piece Keep the handle of the Cordless Circular Saw dry clean and free from oil and grease Do not run the Cordless Circular Saw while carrying it at your side A mov ing blade could cause serious personal injury Disconnect battery pack from tool and place the switch in the locked or OFF position before making any assembly adjustments changing acces sories performing any inspection maintenance or cleaning procedures Such preventive safety measures reduce the risk of starting the tool accidentally which could cause serious personal injury Be extra careful when cutting in high or hard to reach locations Avoid saw ing overhead Be on the lookout for hidden wires and falling debris Do not use the Cordle
83. rade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages 14 Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMM ERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS
84. rent Type of Current T Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal E Class 11 Construction Denotes Double Insulation min Minutes Time S Seconds Time SYMBOL EXPLANATION Diameter Size of Drill Bits Grinding Wheels etc n No load speed No load Rotational Speed Revolutions Minute Revolutions Surface Speed Strokes etc per Minute 1 29 Ring Selector Settings Speed Torque or Position Settings FUNCTIONAL DESCRIPTION WARNING Be aware that this tool is always in an operating condition because it does not have to be plugged into an electrical outlet Always turn the switch OFF and remove the battery pack before changing bits CONTROLS AND COMPONENTS 8 Lock Off Button 1 Battery Pack 9 Rubber Grip 2 Release Buttons ACCESSORIES on Each Side 10 Saw Blades 2 3 120V AC Adapter 11 Rip Fence Guide 4 Charger COMPONENT MODEL NUMBER 5 LED Charging Indicators BATTERY PACK 690071 6 Saw Shoe CHARGER 690507 7 Trigger Switch SAW BLADES 690086 CONTROL FEATURES BEVEL LEVELING ADJUSTMENT KNOB KNOB This knob controls the depth of This knob controls the beveling your cut of your cut BLADE SAFETY W LOCK BUTTON This button locks the blade position and prevents it from moving ZA RIP FENCE The scaled rip fence guides the saw to cut exactly along the edge a of work piece making
85. rming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will
86. rranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase 19 SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on jobsite This warranty does not apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconfo
87. ry hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury WARNING CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS DANGER People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically tr
88. ry operated tool only with specifically designated battery pack Use of any other batteries may create risk of fire WARNING Stay alert watch what you are doing and use common sense when operat ing a power tool Do not use tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Dress properly Do not wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accidental starting Be sure switch is in the locked or OFF position before inserting battery pack Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch ON invites accidents Remove adjusting keys or wrenches before turning the tool ON A wrench or a key that is left attached to a rotating part of the tool may result in person al injury Do not overreach Keep proper footing and balance at all times Proper foot ing and balance enable better control of the tool in unexpected situations Use safety equipment Always wear eye protection Dust mask non skid safe ty shoes hard hat or hearing protection must be used for appropriate conditions TOOL USE AND CARE CAUTION Use clamps or other practical ways to secure and support the workpiece to a stable platform Holdin
89. s returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the 21 item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Alltrade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall
90. se dull or damaged blades Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control When restarting a saw in the workpiece check that teeth are not engaged in the material Keep the handle of the Cordless Jigsaw dry clean and free from oil and grease Be extra careful when cutting in high or hard to reach locations Be on the lookout for hidden wires and falling debris Maintain labels and nameplates on the Cordless Jigsaw These carry impor I I M i 1 IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL EXPLANATION V Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second W Watt Power Kg Kilograms Weight rN Alternating Current Type of Current Direct Current Type of Current Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal El Class Construction Denotes Double Insulation min Minutes Time S Seconds Time Diameter Size of Drill Bits Grinding Wheels etc Ny No load speed No load Rotational Speed Revolutions Minute Revolutions Surface Speed Strokes etc per Minute 1 2 3 Ring Selector Settings Speed Torque or Position Settings FUNCTIONAL DESCRIPTIO
91. se only Your charger and or adapter has been designed for charging batteries of the type approved and supplied with this tool RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 4 WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury 2 CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage NOTE NOTE provides additional information that is useful
92. sing Never immerse any part of the tool in a liquid Always keep the ventilation openings clear Always clean the battery pack using only a dry cloth Do not use liquids Always unplug the charger before cleaning it Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth Never open the Cordless Jigsaw case battery pack or charger Do not attempt to repair the Cordless Jigsaw battery pack or charger yourself Opening any of these parts will void your warranty ACCESSORIES Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experi ence a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table below RECOMM ENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G AMPERE 10FT 25FT 50FT 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 12 12 12 SPECIFICATIONS SPECIFICATIONS Voltage 19 2 Length of Stroke 15mm Strokes per minute 0 2400 min Max Cutting Thickness 20
93. sk of electric shock A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery A charger that may be suitable for one type of battery may create a risk of fire when used with another battery Use battery operated tool only with specifically designated battery pack Use of any other batteries may create risk of fire Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock A WARNING Stay alert watch what you are doing and use common sense when operat ing a power tool Do not use tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Dress properly Do not wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from m
94. ss Circular Saw if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid Maintain labels and nameplates on the Cordless Circular Saw These carry important information If unreadable or missing contact Alltrade for a replacement CAUSES AND PREVENTION OF KICKBACK CAUTION Kickback is a sudden reaction to a pinched bound or misaligned saw blade causing an uncontrolled saw to lift up and out of the work piece toward the operator When the blade is pinched or bound tightly by the kerf closing down the blade stalls and the motor reaction drives the unit rapidly back toward the operator If the blade becomes twisted or misaligned in the cut the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator Kickback is the result of tool misuse and or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below Maintain a firm grip on the saw and position your body and arm in a way that allows you to resist KICKBACK forces KICKBACK forces can be controlled by the operator if proper precautions are taken When blade is binding or when interrupting a cut for any reason release the trigger and hold the saw motionless in the material until the blade comes to a complete stop Never attempt to remove the saw from the work or pull the saw backward whil
95. t apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Part
96. ttery charger When the battery is BATTERY placed in the charger the red LED CHARGER indicator light will remain on 120V AC ADAPTER 3 When fully charged reattach battery pack onto Cordless Worklight making certain latches fasten securely Cordless Worklight will not operate properly if the battery pack is not seated properly OPERATING THE WORKLIGHT WARNING Parts of this Worklight heat up almost immediately when in use To avoid burns use caution when handling light bulb and metal reflector Never change a hot light bulb Bulb must be cool to the touch before attempting to remove or replace it OPERATING THE ON OFF SWITCH Press the ON OFF switch to turn the worklight ON and ADJUSTING THE WORKLIGHT BEAM Hold the handle of the Worklight securely in one hand With the other hand swivel the head of the Worklight counter clockwise until it is at the angle you desire Swivel the head of the Worklight clockwise to return it to its original position REPLACING THE LIGHT BULB This Worklight uses a Krypton 19 2V 0 6 A light bulb Use of any other kind of light bulb may cause damage or injury Parts of this worklight heat up almost immediately when in use To avoid burns use caution when handling light bulb and metal reflector Never change a hot light bulb Bulb must be cool to the touch before attempting to remove or replace it NOTE For your convenience a spare light
97. wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accidental starting Be sure switch is in the locked or OFF position before inserting battery pack Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch ON invites accidents Remove adjusting keys or wrenches before turning the tool ON A wrench or a key that is left attached to a rotating part of the tool may result in person al injury Do not overreach Keep proper footing and balance at all times Proper foot ing and balance enable better control of the tool in unexpected situations Use safety equipment Always wear eye protection Dust mask non skid safe ty shoes hard hat or hearing protection must be used for appropriate conditions TOOL USE AND CARE CAUTION Use clamps or other practical ways to secure and support the workpiece to a stable platform Holding the work by hand or against your body is unstable and may lead to loss of control Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not use the tool if the power switch does not turn it ON or OFF A tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect battery pack from tool o
98. when grasping the bit or accessory Accessories may be hot after prolonged use Hold the rear end of the chuck in one hand and use the other hand to rotate the front end in a counter RELEASE clockwise direction to open the jaws of the chuck HOLD HERE Insert the shank of the bit or other accessory lully into the keyless chuck taking care to keep the bit in the center of the jaws of the chuck HOLD HERE Turn the front end of the chuck clockwise to hold the bit in place qp Tighten securely by turning the front end of the chuck clockwise while holding the rear end OPERATING THE DRILL WARNING Never tape the trigger switch down to provide continu ous high speed The tool may fail under such conditions causing fire or personal injury VARIABLE SPEED TRIGGER SWITCH THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH The speed of the Cordless Drill depends on the amount of pressure you put on the trigger TRIGGER The more pressure you apply the faster SWITCH the Cordless Drill will go Release the pressure and the Cordless Drill will slow down BUILT IN LED LAMP Press the trigger switch to light up the lamp The lamp remains on while the trigger switch is being pressed The lamp goes out after releasing the trigger NOTE Use a dry cloth to wipe the dirt off the lens of lamp Be careful not to scratch the lens of lamp or it may lower the illumin

Download Pdf Manuals

Related Search

Related Contents

消臭 除菌 - コスモ機器  LevelOne 8 x 802.3af PoE + 2 GE TX Managed Switch -40 ~ 75C, DIN-rail  Grandstream GXP1100/1105 IP Phone User Manual  ワンポイントアドバイス  CN56X0B Access Control Door Reader User Manual v1.1  Manual de usuario Arduino M2M Shield.  125 MAX 125 JUNIOR MAX 125 MINI MAX/125 MICRO MAX  www.inova.ind.br    Télécharger  

Copyright © All rights reserved. Failed to retrieve file