Jwin JL-CD808 Clock User Manual
Contents
1. To repeatedly play the memorized tracks press the REPEAT button twice the REPEAT indicator will light CLOCK SETTING To SET or RESET THE ACTUAL TIME Toset the minute Press and hold the CLOCK ADJ button then press the SKIP 44 M button until the present minute appears in the display _To set the hour Press and hold the CLOCK ADJ button then press SKIP m1 H button until the present hour appears in the display To SET or RESET THE ALARM TIMES Q Slide the ALARM 1 or ALARM 2 switch to the ADJ position the Alarm time will blink in the display O To set the wake minute Press the SKIP 14 M button until the desired wake minute appears in the display O To set the wake hour Press the SKIP H button until the desired wake hour appears in the display O Slide the desired alarm switch 1 or 2 to the ON Set or OFF Not Set position Notes When the ALARM 1 or ALARM 2 switch is in the SET position all CD and function buttons will not operation so make sure to return the switch to the NO or OFF position after setting the alarm time s This unit has 2 alarms each can be set for a different wake time To SET THE ALARM TO WAKE TO BUZZER Q Set the alarm time as previously instructed Q Slide the BUZZER MUSIC switch to the BUZZER position When the actual time matchs one of the selected preset alarm times the buzzer will sound for 60 minutes and then shuts off To SET THE ALARM TO WAKE TO RADIO OQ Setthealarm time as pre2. reproduction quality Never use chemicals such as record sprays antistatic sprays benzine or thinners to clean compact discs These chemicals can damage the disc s surface Discs should be returned to their cases after use This avoids serious scratches that could cause the Laser pickup to skip Do not expose discs to direct sunlight high humidity or high temperatures for extended periods Long exposure to high temperatures can warp the disc Do not stick paper or write anything with a ballpoint pen on the label side of the disc LOADING AND UNLOADING COMPACT DISCS LOADING AND UNLOADING Compact Discs Q Press the STANDBY button to turn the unit on O Slide the FUNCTION Switch to the CD position Press the right side of the CD door labelled PUSH OPEN CLOSE to open the CD compartment O When the disc compartment has opened insert the disc with the label side facing up Push down in the centre until disc is locked in place OQ Close the disc compartment by pressing the PUSH OPEN CLOSE When the compartment is fully closed the disc will start turning automatically The total number of tracks will appear in the display O The disc compartment may be opened at any time by first pressing the stop button and then pressing the PUSH OPEN CLOSE Remove the CD only after the compartment has fully opened CAUTION Do not put anvthing except a compact disc into the compartment Foreign objects can damage the mechani
3. twice The REPEAT indicator will light up Q Press the Play Pause button and the unit will then play all the tracks on the CD over and over until the STOP button is pressed Adjust the VOLUME control as desired Q If the REPEAT button is pressed 1 more time during play the REPEAT indicator will go off Repeat Mode will end and normal playback will resume from that point PROGRAMMED DISC PLAV Q Insert a CD as described in the previous section and close the disc compartment Silidethe FUNCTION switch to the CD position Q Press the PROGRAM button P 01 will show on the display select the first track to be played back using the SKIP forward backward buttons then press the PROGRAM button again Q Repeat this step to program additional tracks up to a maximum of 20 tracks Q Press the PLAY PAUSE button to begin Program playback and adjust the VOLUME control as desired To skip forward or backward through the programs press the SKIP buttons O When the disc is through playing it will stop Notes Press the STOP button to stop the program before it is finished To clear the memorized tracks press the PROGRAM button to enter the Program mode PROGRAM indicator will blink and then press STOP button or open the CD door as explained Programming is the ability to select the order in which a series of tracks will be played Each track may be stored in the program memory as many times as desired up to 20 tracks
4. 9 volt battery not included To install the battery slide down the compartment cover at the back of unit to open Then connect e Al the batterv to the terminals of the batterv snap inside the O O compartment use of an alkaline battery is recommended and p slide the battery compartment cover back into place lt Be sure to check the condition of the battery periodically by disconnecting the AC cord and connecting it again 2 or 3 minutes later The preset times should continue operating If the clock resets to 12 00 on the Clock Display it indicates the battery is dead or not connected properly BATTERIESPRECAUTIONS Follow these presautions when using batteries in this device 1 Use only the size and type of batteries specified 2 Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment Reversed batteries may cause damage to the device 3 If the device is not to be used for a long period of time remove the batteries to prevent injurv from possible batterv leakage LISTENING TO THE RADIO OPERATION Q Press the STANDBY ON button to turn the unit on the STANDBY ON LED indicator will light O Silde the FUNCTION switch to the desired band AM or FM and tune a station by turning the TUNING control O When a strong FM stereo signal is received while listening to FM the FM ST indicator will light and the sound will be heard in stereo Adjust the VOLUME control as d
5. ensure that all electrical connections including the mains plug extension leads and interconnections between pieces of equipment are properly made and in accordance with the manufacturer s instructions Check that the mains fuse rating is correct DO always consult your dealer if you are ever in doubt about the installation operation or safety of your equipment He is the best person to advise you DONOT obstruct the necessary all round ventilation especially DON T stand the set close to curtains or on soft furnishing such as carpets Overheating can cause unnecessary damage and shorten the life of the set Remember that to obtain the best performance and lasting satisfaction from your equipment have it regularly maintained by a reliable service organization Ensure that it is correctly used by all the family ABOVE ALL Never let children push anything into holes or slots in the case this could result in an electric shock Never guess or take chances with electrical equipment of any kind it is better to be safe than sorry
6. esired ANTENNA For FM reception there is a built in one meter FM aerial wire at the rear of the unit Unravel the wire and move it around to obtain the best reception For MW reception the signals are picked up through the built in ferrite antenna You may have to move the unit to obtain the best reception IMPORTANT Since movement of the CD mechanism and the sensitive circuitrv mav cause interference to a radio tuner nearbv switch this unit off while operating other radio devices This product utilizes a laser Danger Invisible laser radiation when opened and interlock failed or defeated Avoid direct exposure to the beam Caution Use of controls adjustments or procedures not listed in this manual may result in hazardous radiation exposure COMPACT CONCERNING Compact Discs ISE Only compact discs identified with this mark can be used with this player DIGITAL AUDIO HANDLING COMPACT DISCS To remove a disc from its storage case press down on the centre of the case and lift the disc out holding it carefully by the edges Fingerprints and dust should be carefully wiped off the disc s recorded surface with a soft cloth Unlike conventional records compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles Wipe in a straight line from the inside to the outside of the disc Small dust particles and light stains will have absolutely no effect on
7. jWIN JL CD808 INSTRUCTION MANUAL LOCATION OF CONTROLS CD Compartment Push Open Close Standby On Alarm Off Indicator LED Standby On Alarm Off Button Stop Button Play Pause Button 1 Program Button Sleep Button Repeat Button CD Displav Button Clock Adjust Button 8 Skip Forward Clock Set Hour 7 Button 13 Skip Backward Clock Set Minute Button 14 Snooze Button 15 Program Indicator 16 FM ST Indicator 17 Dial Scale amp Pointer 18 Sleep Indictaor 19 Repeat Indicator 20 LEDDisplay 21 Phones Jack at the back 22 AC Cord at the back 23 Music Buzzer Switch 24 Alarm 2 Switch 25 Alarm 1 Switch 26 Tuning Control 27 Volume Control 28 Function Switch AM FM CD 29 FM Antenna at the back ON OP ONS m a a DIT DUIRA P 23 24 25 26 27 28 PREPARATION FOR USE Remove the stereo carefully from the box retaining the packaging for future use Read these instructions carefullv before use AC Power OPERATION Unravel the AC cord and connect it to a convenienty located AC outlet Press the STANDBY button to switch the unit on or off i The Clock Display will show 12 00 and needs to be set ki If the AC cord is disconnected or if there is a power failure the AC Outlet electronic clock is designed to continue operating internally N without showing the time on the Clock Display with a
8. press the SLEEP button for the desired sleep time of 90 60 or 30 minutes The SLEEP indicator will light to indicate the Sleep mode is activated The sleep time will internally count down and then turn off when the desired amount of time has passed O To turn the Sleep mode off either press the STANDBY ON button which will turn the unit off or press the SLEEP button until appears on the display to keep the radio CD on but cancel the Sleep mode HEADPHONE Headphones should have a 3 5mm diameter stereo plug and an impedance of 8 32 ohms When headphones are connected the speakers are automatically disconnected MAINTENANCE AND CARE Electronic products of this kind should never be subjected to extreme temperatures or high humiditv For instance this set should not be placed in bathing areas or around stoves and radiators If necessary clean the unit with a piece of cloth dampened with water only Be sure the AC Power Cord is disconnected from the Mains Never use a polish or a strong detergent as this will damage the finish of the cabinet This equipment has been designed and manufactured to meet the highest international standards but like any electrical apparatus which is operated at mains voltage care must be taken if you are to obtain the best results and safety is to be assured This is particularly important with audio equipment DO read the operating instructions before you attempt to use the equipment DO
9. sm Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism Never place more than one disc into the disc compartment at anv time If the disc is correctiv loaded the total number of tracks on the disc will be displaved Notes After the disc compartment is fullv closed the disc information mav not appear on the displav This means that the disc is improperlv loaded most likelv it is upside down To check open the disc compartment again and reload the disc DISC PLAV Insert a CD as described in the previous section and close the disc compartment The displav will then show the total number of tracks Press the PLAY PAUSE button to start playback Adjust the VOLUME control as desired To skip forward or backward through the tracks on the disc press the SKIP forward backward buttons When the disc is through playing it will stop Press STOP button to stop disc before it is finished Notes If the disc is deeply scratched or too dirty disc play may not start If an improperly centred disc is played noise can be heard in the mechanism The use of such discs should be avoided If the disc is inserted incorrectly or the disc is damaged the display will show No disc oo00o O Disc ERRORS This compact disc plaver has built in error compensation circuits to correct for minor defects in a disc There are limits however to the amount of correction available In
10. some cases the CD plaver mav skip some tracks or parts of tracks on a disc during disc plav This problem mav be caused bv defects such as scratches in the disc being plaved which are too large for the error compensation circuits to handle If you encounter this problem check the CD player s operation as follows before having the unit serviced Play a new disc If the CD player operates normally the skipping problem is probably due to a defective disc To Stop a CD Part Way THROUGH Press the STOP button Disc play will stop and the display will show the total number of tracks To temporarily stop disc play pause mode press the Play Pause button Disc play will stop at the current play position The track playing time will flash To resume disc play press the PLAY PAUSE button again REPEAT DISC PLAY Use the REPEAT button to listen to an entire disc one track repetitively FoR REPEAT PLAY OF ONE OF THE TRACKS Q Witha CD inserted silide the FUNCTION switch to the CD position Q Press the REPEAT button once The REPEAT indicator will blink Q Press the Play Pause button and the unit will then play the same track over and over until the STOP button is pressed Adjust the VOLUME control as desired Q If the REPEAT button is pressed 2 more times during play the REPEAT indicator will go off Repeat Mode will end and normal playback will resume from that point FOR REPEAT PLAY OF ALL THE TRACKS Q Press the Repeat button
11. viously instructed Slide the FUNCTION switch to the AM or FM position Q Select a radio station and make sure the volume is set as desired Q Make sure the power is off STANDBY ON indicator is NOT lit Slide the BUZZER MUSIC switch to the MUSIC position When the actual time matches one of the selected preset alarm times the unit automatically turns on for 60 minutes and then shuts off To SET THE ALARM TO WAKE TO CD OQ Setthealarm time as previously instructed Slide the FUNCTION switch to the CD position Q Insert a CD and make sure the volume is set as desired Q Make sure the power is off STANDBY ON indicator is NOT lit Slide the BUZZER MUSIC switch to the MUSIC position When the actual time matches one of the selected preset alarm times the unit automatically turns on for 60 minutes and then shuts off Note When the disc is through playing it will stop To SHUT THE ALARM OFF O To shut the alarm off press the STANBY ON button once and the alarm time will be reset for the next day Slide the desired ALARM 1 or ALARM 2 switch to the OFF position to turn off the alarm and not set it for the next day O The alarm can be temporarily turned off manually by pressing the SNOOZE button the alarm will turn back on automatically 6 minutes later To ACTIVATE THE SLEEP FUNCTION Tune the desired radio station or insert a CD previously instructed Q Press the SLEEP button and will appear on the clock display Repeatedly
Download Pdf Manuals
Related Search