Insignia NS-CLBT01-B Clock User Manual
Contents
1. e Consumables including but not limited to batteries i e AA AAA C etc e Products where the factory applied serial number has been altered or removed e Loss or Theft of this product or any part of the product e Up to three 3 pixel failures dots that are dark or incorrectly illuminated grouped in an area smaller than one tenth 1 10 of the display size or up to five 5 pixel failures throughout the display Pixel based displays may contain a limited number of pixels that may not function normally e Failures or Damage caused by any contact including but not limited to liquids gels or pastes REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE2. apon penn oooO 1 Preset When you are programming a radio station preset the Preset icon lights and the next available preset number P 01 through P 10 appears in the middle of the LCD When you exit programming mode these indicators disappear See Programming a radio station preset on page 11 When you tune to a radio station preset the preset number P 01 through P 10 appears See Tuning to a preset radio station on page 11 Volume After you select the alarm sound this icon indicates that you can change the volume of the alarm See Setting the alarm sound on page 9 While you are adjusting the radio volume the Volume icon lights and the current volume level 1 through 15 appears in the middle of the LCD When you stop adjusting the alarm or radio volume these indicators disappear 3 Currenttime time Displays the current time Ha Lights when the sleep timer is active See Setting the sleep timer on page 10 Lights when Alarm 1 has been set See Setting the alarm time on page 9 AUX Lights when a connected audio device is selected as the audio source See Connecting an audio device on page 13 7 Bluetooth Lights when a paired Bluetooth device is selected as the audio source See Playing audio from a Bluetooth device on page 12 8 JM Lights when the radio is selected as the audio source 2i AM PM AM lights after midnight and before noon PM lights after noon and
3. digits blink on the LCD Press or to increase the minutes or press or to decrease the minutes Press Alarm 1 or Alarm 2 again The Volume icon appears on the LCD and the time digits blink INSIGNIA 6 Press or to increase the alarm volume or press or to decrease the alarm volume The alarm volume range is from 1 to 15 with 15 being the loudest setting The default setting is 10 While you are adjusting the volume the Volume icon lights and the current volume level number appears in the middle of the LCD 7 Press Alarm 1 or Alarm 2 again to save the time setting and exit alarm setting mode Using the snooze feature You can press SNOOZER DIMMER a total of six times If you press it a seventh time the alarm turns off To use the snooze feature When the alarm sounds press SNOOZER DIMMER The alarm turns off for 10 minutes and SNOOZE appears on the LCD Turning off the alarm To turn off the alarm e Press any button except SNOOZER DIMMER Setting the sleep timer You can specify the amount of time your radio waits before it turns off automatically To set the sleep timer Press Sleep repeatedly to select the amount of time you want your radio to wait before it turns off automatically You can select 15 30 45 60 or 90 minutes The time you select and the SLEEP icon appear on the LCD To turn off the sleep timer press Sleep repeatedly until 00
4. latch to release the battery compartment cover on the bottom of your radio then lift the cover off the battery compartment INSIGNIA 2 Insert two AAA batteries not included into the battery compartment Make sure that the and symbols on the batteries align with the and symbols inside the compartment Insert the tab on the battery compartment cover into the slot on the battery compartment then press the cover down until it clicks into place Connecting the AC DC power adapter If you unplug the AC DC power adapter and the backup batteries are dead or not installed the time setting is lost To connect the AC DC power adapter 1 2 Plug the small connector on the power adapter into the DC IN jack on the back of your radio Plug the other connector on the power adapter into a power outlet Using your radio Setting the time AM or PM appears on the LCD to the right of the time When you set the time make sure that the AM or PM displays correctly To set the time 1 Press Sleep for about two seconds until the hour digits blink on the LCD Press or to increase the hour or press or to decrease the hour Press Sleep again The minutes digits blink on the LCD Press or to increase the minutes or press or to decrease the minutes Press Sleep again to save the time setting and exit time setting mode INSIGNIA Setting the alar
5. ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Insignia For customer service please call 1 877 467 4289 www insigniaproducts com Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield Minnesota U S A 55423 3645 2013 BBY Solutions Inc All rights reserved INSIGNIA is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners INSIGNIA ASSAN INSIGNIA is a registered trademark of BBY Solutions Inc Registered in some countries Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 2013 BBY Solutions Inc All Rights Reserved 1 877 467 4289 www insigniaproducts com V2 ENGLISH 13 0221
6. User Guide Digital Clock Radio with Bluetooth NS CLBT01 B NS CLBT0O1 W INSIEINIZ Before using your new product please read these instructions to prevent any damage INSIGNIA NS CLBT01 B NS CLBT01 W Digital Clock Radio with Bluetooth Contents NA OCUCHION op nus touapetenecunepsiaenesesceneuoeesteakeeaanaeres 2 Important safety iNStruCtiONS cece cece cece eee e eens 3 TEED E EE E EEEE E tocar oes acetone S EE 4 TOD OUTGOING sarete eieaa rAr NEAN KAIETAN ARTEEN 4 2 E E E E E EE EEE 5 DES AN E AA E T A 4c 6 Package contents susesusuesesesersesesosorsesorere 7 Setting Up your Tadi isc ss0setoe459 Er PEERAA ENORI INAS TERI 7 Installing backup batteries ccc ccc ccc cece eee eee 7 Connecting the AC DC power adapter eee 8 Using VOUrTACIO 34 lt 04 seabeanescangaewders ieetuaw aE 8 SECU TEE a E E E eed ieee 8 Setting the alarm SOUNC ccc cece cece ee eee eee enees 9 Setting the alarm time ccc ccc cece eee eee eeees 9 Using the snooze feature cece arr cece nor ESEA 10 Turning off the alarm ccc ccc cece cece ee eee eee enes 10 Setting the sleep timer ccc cece cece eees 10 Playing YOUr radio ccc ccc ccc eect e eee e ee enaes 10 Programming a radio station preset cece eee 11 Tuning to a preset radio Station cece eee eee eee 11 Adjusting the LCD brightness ccc cece eee ees 11 Playing audio from
7. a Bluetooth device 0000ee 12 Connecting an audio deViCe 1 eee cece cece ee eens 13 Charging a device s battery ccc cece cence eee eens 13 Troubleshooting ccc cc cece eee eee cence eee eeeeeeeeeaes 14 SCC CAM ONS sesers ereer a EEE EE EET 15 Legal Noties yssen ea N hues 16 90 day limited warranty Insignia 0 cece cece e eee e ees 17 Introduction Congratulations on your purchase of a high quality Insignia product Your NS CLBT01 B or NS CLBT01 W represents the state of the art in digital clock radio and Bluetooth design Your radio is designed for reliable and trouble free performance INSIGNIA Important safety instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth NOOO BP OND Do not block any ventilation openings Install in accordance with the manufacturer s instructions e0 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician
8. air Bluetooth is not selected as the audio Press press Source repeatedly until with my radio source on your radio Bluetooth appears on the LCD Your radio is not in pairing mode Press and hold Pair Preset On for six seconds Your Bluetooth device is too far away Make sure that your Bluetooth device is within from your radio 33 feet 10 meters of your radio Your Bluetooth device is not in Make sure that your Bluetooth device is in pairing mode pairing mode See the instructions that came with your device The battery level on your Bluetooth Charge the battery on your Bluetooth device device may be too low then try pairing again Another paired Bluetooth device is Another paired Bluetooth device that is too too close to your raido close to your radio such as a cell phone paired to a headset can interfer with pairing Move the other paired device away from your radio or turn off the other paired device Your Bluetooth device may not use a Your radio supports the A2DP and AVRCP supported Bluetooth protocol Bluetooth protocols Check the documentation that came with your device to determine if it uses a supported protocol My radio is in pairing mode but Your Bluetooth device may not be Make sure that your Bluetooth device is turned does not pair with my Bluetooth turned on on device You have not selected your radio on Make sure that your Bluetooth device is in the Bluetooth device pairing mode then se
9. appears and the SLEEP icon disappears Playing your radio When you turn off your radio it goes into standby mode To play your radio 1 Make sure that you have connected the AC DC power adapter See Connecting the AC DC power adapter on page 8 2 Press Source Your radio turns on 10 INSIGNIA 3 Press or to manually select a radio frequency OR Press and hold or to automatically tune to the next lower or higher radio station 4 Press 4 or to increase or decrease the volume While you are adjusting the volume the Volume icon lights and the current volume level number appears in the middle of the LCD 5 To turn off your radio press and hold Source for two seconds OFF appears on the LCD for three seconds then your radio turns off Programming a radio station preset A radio station preset lets you assign a preset number to a radio station to make it easier to tune to a station You can program 10 presets To program a radio station preset 1 Tune to the radio station you want to program then press and hold Preset for two seconds The Preset icon lights and the next available preset number P 01 through P 10 appears in the middle of the LCD When you exit programming mode these indicators disappear 2 Ifyou want to use a different preset number press or repeatedly until the number you want appears on the LCD 3 Within 10 seconds press Preset again to save
10. before midnight 10 Bluetooth logo Blinks slowly if you select Bluetooth as the audio source and no Bluetooth device is connected Blinks quickly while pairing with a Bluetooth device Lights solid when a Bluetooth device is connected See Playing audio from a Bluetooth device on page 12 Lights when your radio is in snooze mode See Using the snooze feature on page 10 12 Lights when no backup batteries are installed or when the backup battery charge is low 6 INSIGNIA epon Penton ooo Lights when Alarm 2 has been set See Setting the alarm time on page 9 Package contents e Digital clock radio with Bluetooth e AC DC power adapter e Quick Setup Guide e User Guide Setting up your radio Installing backup batteries The backup batteries provide power to backup your settings when you unplug the AC DC power adapter e Use only the size and type of batteries specified Do not mix old and new batteries e Make sure that you follow the correct polarity as indicated in the battery compartment e Do not try to recharge batteries not intended to be recharged They can overheat and rupture Follow the battery manufacturer s directions e Do not throw batteries into a fire Dispose of used batteries as hazardous waste If you unplug the AC DC power adapter and the backup batteries are dead or not installed the time setting is lost To install backup batteries 1 Push the
11. d hold or to fast reverse or fast forward through the songs on the Bluetooth device Press Pair Preset O to start or pause playback To disconnect from a paired device Press Source to change to a different audio source such as FM Press and hold Source to turn off your radio Unplug the AC DC power adapter Turn off the Bluetooth function on the connected device Move the Bluetooth device more than 33 feet 10 meters from your radio Connecting an audio device You can connect an audio device such as an MP3 player to your radio to play music through your radio s speakers To connect an audio device 1 Plug an audio cable with a 3 5 mm connector not included into the AUX IN jack on the back of your radio and into the audio out jack on your audio device 2 Press Source to turn on your radio then press Source repeatedly until AUX appears on the LCD 3 Press 4 or to increase or decrease the volume While you are adjusting the volume the Volume icon lights and the current volume level number appears in the middle of the LCD 4 Use the controls on the audio device to control playback Charging a device s battery You can use the USB port on your radio to charge a connected device s battery To charge a device s battery Connect a USB cable not provided to the USB port on your radio and to the USB port on the device 13 INSIGNIA Troubleshooting My Bluetooth device will not p
12. e Warranty Period lasts for ninety 90 days from the date you purchased the Product Your purchase date is printed on the receipt you received with the Product What does this warranty cover During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel Insignia will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Insignia and are not returned to you If service of Products or parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Insignia Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a Best Buy or Future Shop retail store location please take your original receipt and the Product to any Best Buy or Future Shop store Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from a Best Buy or Future Shop online web site mail your original receipt and the Product to the address listed on the web site Make sure
13. for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 14 To reduce the risk of fire or electric shock do not expose this device to rain moisture dripping or splashing and no objects filled with liquids such as vases shall be placed on it 15 The wall plug is the disconnecting device The plug must remain readily operable 16 Batteries should not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type INSIGNIA Features Top buttons Sleep MORSO x oe oeeton O Pair Preset On button ph Sleep button previous fast reverse button Ye Alarm 1 button next fast forward button Alarm 2 button Ge button Press and hold for si
14. ld Pair Preset Cn for six seconds Your radio enters pairing mode Your radio remains in pairing mode for five minutes or until your radio pairs with the Bluetooth device e If your Bluetooth device is not turned on or is too far away from your radio the icon on the LCD blinks every two seconds e While your radio is pairing with your Bluetooth device the icon on the LCD blinks twice a second When pairing is complete the amp icon on the LCD lights solid 5 On the Bluetooth device select NS CLBT01 B or NS CLBT01 W See the instructions that came with your Bluetooth device for information about how to select a device for pairing e Your Bluetooth device must be within 33 feet 10 meters of your radio e Ifyou turn off your Bluetooth device or move it too far from the radio the pairing connection is lost When you move the last connected device within your radio s range the pairing connection is restored e Your radio can store pairing information for eight devices To play from a paired Bluetooth device 1 Press Source to turn on your radio then press Source repeatedly until Bluetooth appears on the LCD 2 To control playback Press or to increase or decrease the volume While you are adjusting the volume the Volume icon lights and the current volume level number appears in the middle of the LCD Press or to go to the previous or next song 12 NNN INSIGNIA Press an
15. lect NS CLBT01 B or NS CLBT01 W on your Bluetooth device See the instructions that came your the Bluetooth device Your Bluetooth device is too far away Make sure that your Bluetooth device is within from your radio 33 feet 10 meters of your radio Sound from my Bluetooth device The volume level is set too high Lower the volume on your radio or Bluetooth is distorted or broken up device Your Bluetooth device is too far away Make sure that your Bluetooth device is within from your radio 33 feet 10 meters of your radio There may be something between Walls furniture and other objects can interfer your radio and Bluetooth device that with the communication between your radio is interfering and Bluetooth device Make sure that nothing is between your radio and Bluetooth device 14 Specifications INSIGNIA Total RMS power 2 4 W 1 2 W x 2 1kHz 10 THD Total peak power 48W Signal to noise ratio gt 65dB Frequency response 300Hz 20kHz Supported Bluetooth A2DP protocols AVRCP Speakers 2x40 mm Batteries 2 AAA Dimensions W x D x H 9 8 x 2 1 x 2 1 in 250 x 54 x 54 mm Weight 1 1 Ibs 0 5 kg 15 INSIGNIA Legal notices 16 FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference recei
16. m sound Your radio has two alarms and can play the buzzer or the radio for the alarm sound You can use the same alarm sound for both alarms or set one alarm to use the buzzer and the other alarm to use the radio To set the alarm sound 1 2 Press Alarm 1 or Alarm 2 The or icon blinks on the LCD To use the radio as the alarm sound press Alarm 1 or Alarm 2 once The or icon blinks on the LCD and the alarm sound is set to the radio Wait three seconds to save the setting and exit alarm sound setting mode When the alarm turns on the last tuned radio station plays OR To use the buzzer as the alarm sound press Alarm 1 or Alarm 2 twice The or icon blinks on the LCD and the alarm sound is set to the buzzer Wait three seconds to save the setting and exit alarm sound setting mode To completely turn off the alarm press Alarm 1 or Alarm 2 repeatedly until the or icon disappears from the LCD Setting the alarm time Your radio has two alarms that you can set for different times AM or PM appears on the LCD to the right of the time When you set the time make sure that the AM or PM displays correctly To set the alarm time 1 Press and hold Alarm 1 or Alarm 2 for about two seconds until the hour digits blink on the LCD Press or to increase the hour or press or to decrease the hour Press Alarm 1 or Alarm 2 again The minutes
17. may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment Cet quipement est conforme l exposition aux rayonnements Industry Canada limites tablies pour un environnement non contr l CAN ICES 3 B NMB 3 B INSIGNIA 90 day limited warranty Insignia Definitions Insignia Products Insignia warrants to you the original purchaser of this new Insignia branded product Product that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of ninety 90 days from the date of your purchase of the Product Warranty Period For this warranty to apply your Product must be purchased in the United States or Canada from a Best Buy or Future Shop authorized dealer of Insignia brand products only that are packaged with this warranty statement How long does the coverage last Th
18. n page 11 INSIGNIA ee een S Source source standby button When your radio is turned off in standby mode press to turn it on See Playing your radio on page 10 When your radio is turned on quickly press and release to switch between playing the radio a Bluetooth device or connected audio device See Playing audio from a Bluetooth device on page 12 or Connecting an audio device on page 13 volume down button Press to decrease the volume While you are adjusting the volume the Volume icon lights and the current volume level 1 through 15 appears in the middle of the LCD volume up button Press to increase the volume While you are adjusting the volume the Volume icons lights and the current volume level 1 through 15 appears in the middle of the LCD Back 54 11A USB AUX o O amp 9 rem Peston 1 DCIN jack Connect the AC DC power adapter to this the jack See Connecting the AC DC power adapter on page 8 USB port Connect a device with a micro USB or mini USB cable to charge the device s battery See Charging a device s battery on page 13 AUX jack Connect an audio device to this jack to play the audio from the device through the radio speakers See Connecting an audio device on page 13 INSIGNIA LCD E Wolume Preset AUX FM BLUETOOTH gt Q AD 2i8 HiL rm 8 O SLEEP Q ie Rir Koo A QS Dy
19. that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging To obtain warranty service in the United States call 1 888 BESTBUY Canada call 1 866 BESTBUY for Future Shop call 1 800 663 2275 Call agents may diagnose and correct the issue over the phone Where is the warranty valid This warranty is valid only in the United States and Canada at Best Buy or Future Shop branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made What does the warranty not cover This warranty does not cover e Customer instruction education e Installation e Set up adjustments e Cosmetic damage Damage due to acts of God such as power surges e Accident s e Misuse 17 INSIGNIA 18 e Abuse e Negligence e Commercial purposes use including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex or otherwise used in a place of other than a private home e Modification of any part of the Product including the antenna nela panel damaged by static non moving images applied for lengthy periods burn in e Damage due to incorrect operation or maintenance e Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product e Products sold as is or with all faults
20. ved including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measure e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment RSS Gen amp RSS 210 Statement This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device
21. x seconds to pair your radio with a Bluetooth device See Playing audio from a Bluetooth device on page 12 In Bluetooth mode quickly press and release to start or stop playback See Playing audio from a Bluetooth device on page 12 In FM mode press to program a radio station preset or to tune to a preset radio station See Programming a radio station preset on page 11 or Tuning to a preset radio station on page 11 Press to set the time or the sleep timer For more information see Setting the time on page 8 or Setting the sleep timer on page 10 In Bluetooth mode quickly press and release to go to the previous song In FM mode press and hold for one second to go to the next lower radio station or quickly press and release to manually tune to a lower radio frequency Press to set Alarm 1 See Setting the alarm sound on page 9 and Setting the alarm time on page 9 In Bluetooth mode quickly press and release to go to the next song In FM mode press and hold for one second to go to the next higher radio station or quickly press and release to manually tune to a higher radio frequency Press to set Alarm 2 See Setting the alarm sound on page 9 and Setting the alarm time on page 9 When the alarm turns on press to turn off the alarm for 10 minutes See Using the snooze feature on page 10 Press to adjust the LCD brightness See Adjusting the LCD brightness o
22. your station preset If you do not press Preset within 10 seconds your radio exits preset mode and your station preset is not saved Tuning to a preset radio station After you program radio station presets you can quickly tune to a preset Station To tune to a preset radio station Quickly press and release Preset one or more times until the Preset and preset number P 01 through P 10 for the station you want appears on the LCD Your radio tunes to the station Adjusting the LCD brightness When you adjust the LCD brightness your radio retains the setting and uses this setting the next time you turn on your radio To adjust the LCD brightness 1 Quickly press SNOOZER DIMMER repeatedly to select a brightness level You can select High Middle or Low 11 INSIGNIA 2 Wait afew seconds to save your setting and exit brightness mode Playing audio from a Bluetooth device You can pair your radio with a Bluetooth device to play the Bluetooth audio through your radio s speakers To pair your radio with a Bluetooth device 1 Press Source to turn on your radio then press Source repeatedly until Bluetooth appears on the LCD 2 Make sure that your Bluetooth device is turned on and within 33 feet 10 meters of your radio 3 On the Bluetooth device enter pairing mode See the instructions that came with your Bluetooth device for information about how to enter pairing mode 4 On your radio press and ho
Download Pdf Manuals
Related Search