IFB Appliances AW60-9021 Washer User Manual
Contents
1. 9 Way Of USO 11 Fully automatic programs 11 Delay time program 13 Prewash of heavily stained clothes 13 Wash of blanket 13 Use the cleaning solution for twice 14 Load size and detergent 14 Weight standard of the clothes 15 Method of maintenance 15 Troubleshooting 16 Other functions 17 Precautions 18 Specifications Back cover Features Free injection of hot and cold water Wash and rinse with warm water is good for detergent can better dissolve into the cleaning mixture Slight vibration low noise The new gear transmission technology is adopted to decrease noi2. In order to attain the better spinning effect Remainning water due to testing or experiment in the factory Solution Re plug the power plug Check the power socket or change other socket Press START PAUSE button Re install rightly the universal connector Screw tight the nut Loosen the drain hose for smooth flow of water Wait for coming water Open the tap Clean the netting according to the method of Cleaning of the water inlet This is automatic rectification for spinning in the washing program That the washing are too much or too little or that the washing machine is not placed plane will cause the unbalance in time of spinning If there is still abnormal circumstances after checking the above mentioned points please pull out the power plug and contact with local service as soon as possible Close the upper lid Belong to the normal phenomenon generally Belong to the normal phenomenon generally The washing machine does not work normally because the voltage is low or too high Please pull out the plug and wait till the voltage becomes normal If there is still abnormal circumstances after checking the above mentioned points please pull out the plug Do not repair it by yourself at home which is very dangerous 16 OTHER FUNCTIONS PRECAUTIONS a Function of fault alarm Safe use of power Keep away from dampness A Alarm of the Indication of fault Cause of fault Phenomenon
3. of fault buzzing sound Solution of alarm The buzzer Open the lid to Alarm for Entering water less than goes on deal with faults water injection 16 minutes reset water buzzing sound then close the for 10 seconds lid to solve the If the alarm alarm Open the lid after start the does not be delay time Open the lid solved every when the washer is 16 minutes re buzzs for 10 seconds Please plug the power cord into the special Don t place the washing machine in extreme voltage The plug in and plug out of the wire damp surroudings for dampness may weaken should go on with the plug held with hand the insulation of the machine which may cause electric shock or faults Alarm for opening lid Be examined imbalance Imbalance alarm for the third time After draining for 4 Drain alarm minutes does not Don t use hot water over 50 C to avoid If the lid is opened in time of spinning the washing deformation of the plastics machine will arrest at once which will shorten the service life Please avoid opening the lid in the course of operation as possible and furthermore don t put hands into the tub for it is very dangerous that the clothes wind e Function of automatic power off the hand despite of low speed of rotation 1 Start 10 minutes later to not work automatically shut off the power 2 After end to wash and the buzzer sounds 6 times the washing machine will automatically shut off Avoid spray o
4. temperature of water adjust the time of wash 4 The washing machine has an inbuilt memory thus ensuring the machine will start from the same point where it has stopped on resumption of power supply If you don t want the machine come back to the last process where power failed last time on the condition of the power restoration you only need do is to re start the power button 11 12 WAY OF USE Delay time program Method of use of Delay button Delay time means the beginning time of washing In each press of the button the preset time changes by one hour within 24h After 24 hours each press on the button add 6 hours until 48h 2 3 Load laundry and put detergent Remaining time 4 Select the proper water level according to the Switch on Power button Open the tap and hang the drain hose up quantity of clothes Minutes 5 Select the functions and programs Delay hour washing O 7 Press Start Pause button and close the lid Delay 6 Press Delay button to select the beginning time of Confirmation of the delay and inspection After the delay function is started the corresponding light will be turned on and other lights are turned off After the delay function is started press Delay button continuously you may see the selected programs and the rest of the delay time Loosen the button the program will automatically come back to delay status Cancel the delay time or alter the dela
5. tostopping No use thedelay time function it appearance state shows the programremaining time In order to protect controller the interval of power on and off should be more than 30 seconds 10 WAY OF USE e Fully automatic program Programs Application Washing time Rinse times Spin time Total time Good washing ability Fuzz 12 mins Twice l Mainly for sumer season or not on clothes Economy washing means shorter time mins About 10 mins Suitable for delicate and high grade clothes About 38 mins oe oy er A A o i o gt i i Anti wrinkle The program for anti wrinkle clothes Twice About 27 mins Remark 1 Don t include economy program the upper time table have been reserved water injection time 2 minutes times and drain time 1 minutes times 2 Before select the hot water for wash you need read the notice label of clothes Additional explanation 1 CHILD LOCK function After start press the FUNCTION and WATER LEVEL button at the same time then all buttons will be locked include the POWER button the indication is displayed CL a second every 5 seconds Press the FUNCTION and WATER LEVEL button at the same time to unlock the function 2 In the course SOAK the washer does not stop completely it will wash interval to let the washing evenly mix with the detergent 3 If you have selected the Fuzzy program the washer can detect texture of clothes to change intensity of wash and according to the
6. ALSO FROM IFB MICROWAVE OVEN CAPACITY 17 to 30 LITERS diia mi Bios DISHWASHER gt CAPACITY 12 PLACE SETTING CLOTHES DRYER CAPACITY 5 5KG IFI Customer Care Dial 1860 425 5678 BSNL amp MTNL Callers 3900 4321 Other Callers IFB Industries Limited Plot No IND 5 Sector 1 East Calcutta Township Calcutta 700 078 Visit us at www ifbappliances com IFI Fully Automatic Washing Machine Operation Manual MODEL AW60 9021 Thank you for selecting this fully automatic washing machine Before operating this unit please read this operation manual thoroughly INDEX Features 2 Names of respective parts 3 Simple installation 4 Storing the washing machine 4 Installation of water inlet hose 5 Installation of drain hose 6 Power source and grounding T Installation of base cover 8 Simple operation 8 Functions of buttons
7. Nip the fixing ring with hand to make it loose and engaged on 2 Screw loose the locking ring but do not let the locking ring drop off Screw the four screws at the same the drain hose and put the drain hose into the leading skirt of drain A A Cabi distance hose in the bottom of the washing machine to the end at the most ana 3 Put the universal connector into the tap and stick to the tap mouth at the most and then screw in the screws soak the head of the drain hose in warm water it will make the Fixing ring 4 Screw tight the locking ring to the right engagement easy and loose the fixing ring to let it clasp the drain 5 Pull the skirt of one end of the water inlet hose downwards and then plug in the universal connector Asound of hose KA TA means proper connection It had better put the outlet of the drain hose into the nearby isa 6 Grasp the water inlet hose by hand and pull it downward to see whether it is secured drainage permanently which can save the trouble that the drain A Leading ring 7 Screw the nut on the other end of the water inlet hose into the water inlet of the washing machine to the most hose has to be connected each time before use If the drainage is far from the washing machine it can be solved by connection of the drain hoses head with end to extend SS M If the calibre of the tap F is big the connecting wt ring ring can be taken off A N 8 Y y CE Notices Drain faults will
8. b through the water inlet hose then turn off the power 3 Unload the water inlet hose and clean the mesh bag then restore the water inlet assembly A BI ED y Y 15 Use soft cloth to wipe off the water and dirt on the surface each time after use of the washing machine Detergent propellant and other chemicals S are not allowed to use for they can cause damage to the surface After using the washing machine for a period please clean it according to the following steps 1 Take out the lint filter 2 Open the lint filter and wash it clean in the water 3 Restore it and refix it Exceptional phenomenon No indication in controller The inlet hose leakage Does not drain Dose not inject water Spinning stops and water injecting begains in the course of spin Does not spin Intermittent spinning Before using the machine water exsits in the drain hose S Notices TROUBLE SHOOTING Cause The power plug is not plugged tight The power switch is not switched on Not press START PAUSE button Do not rightly connect the tap with the universal connector Do not screw tight the nut of the water inlet hose The drain hose is wrung or jammed Stop water Do not open the tap Whether the wire netting in the water inlet was stopped up by the sundries Cause by that the washing placed uneven After end to drain do not close the lid Open the lid in course of spinning
9. be caused when the drain hose is blocked 8 Skirt E Notices After end of inlet hose installation do not immediately switch on the power Open the tap and let water go over both ends of the inlet hose and check whether occur the leakage If the inlet hose is difficult to install because of the tap you can invite the experienced person for help The method of installation for the double water inlet hose is same SIMPLE INSTALLATION SIMPLE INSTALLATION SOPERATION Installation of the base cover 1 Slant the washing machine with angle of 45 in the direction of the arrows showed in the figure put the Power source and grou nding side with the clasper to the washing machine and the other side to the ground insert back lid along the direction of the upper slot of the base from the back side of the washing machine The washing machine employs alternative current with the rated voltage 230V and 2 Putthe base cover straight to the point and then press the back lid freguency 50 Hz When the voltage fluctuates between 196V 252V the washing machine can upward till there is a sound of Gaba and then screw in a self tapping screw work normally A special power socket to be provided beside the washing machine for convenience and safety The method of connection of the socket is as the figure below Slot 49 Z Base cover Hole for Self tapping screw QU CS Notices The socket and the grounding wire must be installed by an electr
10. f water Keep away from smoke and fire e Function of adjusting for unbalance Don t let water spray onto the switch or the Don t place lighted candles cigarettes and thermos 1 If the clothes are placed uneven before spinning easy to result in bigger vibrancy of spinning Sota panel in case of electric shock and Tt avoid fire accidents or deformation of the The washing machine has a function of adjusting unbalance When working the system of the Ss washing machine always inspects running state If finding a phenomenon that the spinning vibrancy S E ao is too big the washing machine automatically start the adjusting program To adjust the clothes s state 2 The washing machine can adjust unbalance twice if no effect it will alarm 2 18 17 WARRANTY IFB Industries Ltd The Company warrants to the original domestic purchaser of this washing machine Appliance that it ARAN is free from defects in workmanship and materials During 24 Ay Ar months from the date of purchase of the new washing machine all the parts of the washing machine which prove to be defective in workmanship and or materials shall be replaced or repaired free of charge on intimation to the company company s authorized YEAR service centre nearest to the place where the appliance is installed This warranty is subject to limitations of warranty LIMITATIONS OFWARRANTY 1 This warranty is not valid in case of the following events a If the
11. ician to prevent incorrect installation or use of the socket and to guarantee the safety of use of electricity The power wire of the washing machine employs Y connection and the replacement of the power wire should be carried out by professionals i i No connection of the grounding wire with the neutral wire otherwise the cabinet Simple operation will be charged which is likely to cause the danger of electric shock Before operation please open the splash free cover Put the clothes into washing tub and close the splash free cover Put the detergent into the water inlet case Plug the cord into the socket switch on the power I6 AMPS mm Turnon the tap connected to the two water inlet hoses Press Power button NO oO R WD gt Press Start Pause button The washing machine will go into operation automatically as programmed Grounding wire Rated voltage 220V Remark If you want to set other programs please see and read Way of use FUNCTIONS OF BUTTONS Selection of water level E To set water level according to the quantity of clothes Each press the water level indicator light moves in turn FUNCTIONS OF BUTTONS Temperature Start Pause E Press the button to set the wash m After program selection press the mode of injection HOT or COLD button to start The flashing light water for wash When the lights of indicates the selected p
12. rograms and HOT and COLD are light at the the current state Press the button again for pause The program continues at anotherpress till the same time the HOT water and COLD water are injecting Press the button you can select program is finished HOT COLD and WARM water to be used a m Light Flash RemainingTime Light Flash 505 O Wash Fuzzy O Bulky AW60 9021 04 O Rinse Rapid Wool OP am Fully Automatic Washer IO O Spin i Delicate Anti wrinkle Cold ours 20 Y Child Lock Please read Additional explanation Function 0 0 E Press the button to select WASH RINSE SPIN SOAK WASH RINSE SPIN WASH WASH RINSE RINSE SPIN SPIN Program setting E Six washing programs are available The chosen programs are displayed by indicator lamp The lamp of FUZZY ECONOMY DELICATE is light The lamp of BULKY WOOL ANTI WRINKLE is flash There is no further notice for slight change of above picture Delay E Press the buttonto set up Power switch beginning time ofwashing Each m The power socketis plugged in press the press the buttonaccompany a button the washerenters to workingstate and change of anhour in indicator automatically set upfor standard program within 24h After 24h eachpress E In the course of working pressthe button toend the button add6 hours until48h current program thewasher enters
13. se Strong washing ability with less twist Spurt water current in the stainless steel inner tub without holes help get rid of heavy stain Complete rinse also ensures washing ability Eight water level selection subtle control of water volume saves you water and energy Easy and simple to use with complete functions It satisfies your family s needs of washing with such fully automatic programs as preset washing dynamic soak super washing Dependable the washer automatically sounds alarm when it comes to trouble and then rectify it Pleasant and compact structure exquisite cabinet with medium washing capacity It is of stylish outlook design More information in the specification Memory back up function The washing machine has an in built memory function thus ensuring that it will start from the same point from where it has stopped on resumption of power supply This prevents you from harassment of the power cut which provideyour family with a comfortable washing environment Suggestion f the voltage range exceed 230V 15 we suggest add a manostat to the washing machine NAMES OF RESPEGTIVE PARTS simple installation The washing machine should be placed inside the room with a flat floor which is convenient for water supply and drain has low moisture and no direct sunshine and does not freeze in winter Please adjust the washing machine even according to the instructions below to make the washing machine r
14. shing tub 3 Switch on the power and press the Program button to select the Bulky program and High or Medium water level 4 Press the Start Pause button and c lose the lid 5 At the end of program put the blanket on a clothes line Make sure the blanket is flat and free of wrinkle ES Notices y Al pe Fold in two by the long side Fold three times in the Roll up the blanket Put it into the wash tub with same direction the edge downwards Use the detergent twice 1 Put some laundry and detergent in the washing tub press Function button and set the Single wash program then make the washing machine into operation 2 Take out the laundry after hearing the buzzing sound 3 Put the second batch of laundry in the washing tub and let the washing machine finish the whole washing program 4 Take out the second batch of laundry after hearing the buzzing sound 5 Put the first batch laundry in the washing tub Power on and chose wash spin functions Let the washing machine finish the whole program Load size and detergent Water Weight of E Notices The highest priority of using the detergent is low and mid foam detergent The volume of detergent is changed with different type You need to read the user manual Water volume is different because of clothes variety When the washing machine runs not well please adjust clothes volume and water level The water volume above listed isbased on normal clothes
15. t undertake the responsibility of shifting transfering the appliance from the location where the appliance is originally installed This warranty is issued subject to the jurisdiction of Calcutta courts and or other judicial quasi judicial forums having jurisdiction over the registered office of the company 10 This isthe ONLY WARRANTY covering the appliance given by the company MODEL AW60 9021 SR NO DEALER S NAME CUST OMER S NAME ADDRESS PIN CODE TEL NO Resi Off E MAIL DATE OF PURCHASE MODEL AW60 9021 SR NO DEALER S NAME CUST OMER S NAME ADDRESS PIN CODE TEL NO Resi Off E MAIL DATE OF PURCHASE SPECIFIGATIONS SEKO mm 32 kg Rated input power Rated volume of wash 2 6 0Kg Dry clothes and spinning Maximum water pressure Rated voltage permitted in the water inlet 0 6Mpa Rated fr E Minimum water pressure 0 1M aii permitted in the water inlet i pa OWN THE FOLLOWING PRODUCTS Please tick in the box _ COLOUR Tv REFRIGERATOR AIR CONDITIONER L_ DISH WASHER _ MICROWAVE OVEN L CLOTHES DRYER FRANCHISEE ATTACHED
16. tial damages 4 Parts replaced or repaired under this warranty are warranted throughout the remaining of the original warranty period 5 The company is not liable for any delay in servicing due to reasons beyond the control of the company or any of its authorized service centre 6 This warranty is not applicable if the washing machine is used for commercial purpose or at places like institutions hostels hospitals community halls and other similar applications 7 For any service under this warranty beyond city town municipal limits from the company authorized service centre a fixed charge of Rs 250 will be collected from the customers in addition to the actual to and fro charges by the shortest route Alternatively the customer can bring the appliance to the nearest service centre for carrying out the necessary repairs at customer s own cost During the warranty period whenever the appliance is shifted from the original city of purchase to another city town where service is provided by the company s authorized service agent a warranty transfer charge of Rs 300 will be collected from the customer by the company s authorized service agent The above charges also include the reinstallation charges of the appliance However in case of transfer to a city where the company provides direct service a nominal charge of Rs 250 only will be collected from the customer towards reinstallation The Company however shall no
17. un steadily in low noise 1 Loosen the fixing pole on the adjusting foot screw in or screw out the adjusting foot to make the four foot placed even on the floor 2 When the floor is slanting or uneven it is not easy to make even only by the adjusting foot Then the rubber band can be added to the unflat place 3 Use gradienter to check whether the washing machine is placed flat 4 After the adjustment the fixing pole should be screwed back and tight S Notices If the washing machine is not placed flat the inclination angle is over 2 it may cause great vibration or automatic check and rectification or other abnormal circumstances will often take place in the course of spinning 1 Top lid 2 Washing tub 3 Gradienter 4 Operation panel 5 Filter 6 Adjustable foot 7 Pulsator 8 Top frame 9 Drain hose Bubble Base foam Loose Adjustable foot y Screw in i Fixing pole gt E o Accessories Part of standard machine Tight Screw out Fixing ring 1 is used for the fixation in time of the installation Gradienter mark of the drain hose a EA l Base cover 1 Universal connector 2 Water inlet hose assembly 2 Self tapping screw 1 Drain hose 1 SIMPLE INSTALLATION SIMPLE INSTALLATION Installation of the water inlet hose Installation of drain hose 1 Check the tap mouth If it is not even it can be filed even
18. volume 14 WAY OF USE 8 METHOD OF MAINTENANCE Weight standard of the clothes A suit of work clothes blended about 800g A pair of pajamas cotton about 500g Short sleeves shirt cotton about 130g Method Of Maintenance The following cases are not faults Bath towel cotton about 300g Bedsheet cotton about 500g Socks blended about 50g Short pants cotton about 50g 1 There is water injection in time of washing or rinse which is due to that the washer senses the inadeguacy of water and exchanges water level automatically 2 There is the phenomenon of intermittent spinning in the beginning of spinning which is performed to achieve better spinning effects 3 In the course of spin the program return to the wash program Because that is designed to rectify the unbalanced distribution of load in the spin tub After the whole washing program Maintenance of shell E The washing machine will send off the DOU DOU sound after any program operation to remind you of taking out the load or going on with other operations E After finishing washing please shut off the tap pull out the plug in case of water leakage or fire accident After long time use the water inlet mesh bag may be blocked with smudginess and should be cleaned according to the following steps 1 Switch on the power followed by shutting off the tap 2 Let the washer works for 5 seconds so that water flows into the tu
19. warranty card is not fully and properly filled in and signed at the time of purchase installation by the company s authorized dealer service engineer b If the completed warranty card is not presented to the authorized personnel at the time of service repair c Ifthe appliance is not used in accordance with manufacturer s instructions given inthe Operating Manual d If the washing machine has been installed serviced repaired opened or tampered by any unauthorized personnel e If defects arise caused by accidents alteration misuse neglect abuse substitution of original components with spurious non genuine components attacked by household pest rodents fire flood earthquake lightning and or any other acts of God natural calamities f If defects arising with optional accessories like trolleys rat mesh machine cover on line filter inlet exhaust extension hoses tap adapter extended power supply cable adjustment feet cover etc thereof g If damages occur by improper electrical circuits outside the washing machine or by any electrical supply thereof h Ifthe machine serial number on the appliance is defaced missing or altered i Ifsea water or any substandard detergent has been used in the appliance j Ifthe appliance is taken out of India 2 This warranty does not cover any type of painting plating including rusting etc or defects thereof 3 The company is not liable for any incidental or consequen
20. y time Before the program is started the delay indicator lights the delay time is selected from 1 to 48 hours afer the delay time is set over 48 hours the delay indicator is turned off the function will be cancelled Press power switch to end program and to cancel delay time at the same time To change the delay time please press Start Pause and then press Delay button to reset Pre wash of the dirty clothes As for seriously stained dirty clothes with mud one of the Rinse spin program can be selected to perform pre washing and then add washing powder and select the fully automatic program to wash them You can use the hot water for wash Washing tips Checking pocket of clothes to avoid coins clips and etc Reversing the clothes which is easy teaseled To resist clothes s crossing please cross their sleeves or the ties in advance Before washing remove from clothes s bedload Zipping the clothes if they have in advance Separating clothes if they have easily fading color To put clothes of puff and into washing net bag For special dirty part of clothes you may use some detergent Wash of blanket The weight of blanket should be less than 4kg and please select the bulky program for washing 13 WAY OF USE 1 Dissolve the detergent with proper amount of warm water below 50 C then pour it into the washing machine 2 Fold up the blanket as the method showed in the figures below and put it into the wa
Download Pdf Manuals
Related Search