Harbor Freight Tools 47407 Air Compressor User Manual
Contents
1. the tool outdoors use an extension cord rated for outdoor use signified by WA on the jacket Pacemaker safety warning People with pacemakers should consult with their physician s before using this product operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker Drain compressor every day Do not allow moisture to build up inside the compressor Do not allow compressor to sit pressurized for longer than one hour Make sure all equipment is rated to the appropriate capacity Adjust the output air pressure to the tool s operating capacity Avoid explosions and fire Never place flammable objects near the compressor Never spray water or any flammable liquids towards the compressor Avoid body injury Never direct the air outlet at persons or animals WARNING The brass components of this product contain lead a chemical known to the State of California to cause birth defects or other reproductive harm California Health amp Safety code 25249 5 et seq Note Performance of this tool may vary depending on variations in local line voltage Exten sion cord usage may also affect tool performance Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be under stood by the operator that common sense and caution are factors which cannot be built into this pro2. 3 03 06 07 06 SKU 47407 For technical questions please call 1 800 444 3353 Page 8
3. CENTRAL PNEUMATIC e o 2 GALLON 100 PSI OILLESS AIR COMPRESSOR Lele 11 47407 ASSEMBLY AND OPERATION INSTRUCTIONS ome 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http Awww harborfreight com TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Copyright 2002 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 Revised Cover Page 02 04 11 04 02 05 01 07 Specifications Tank Capacity oe 0 3 SCFM 90 PSI 0 58 SCFM 40 l Cut in at 73 PSI shuts off automatically at 100 PSI 150 sec on 350 sec off Oil less direct drive thermal overload protection Features carrying handle light weight and portable Uses airbrush inflating tires and toys nail gun Blow gun with tips tire chuck Weight 20 Ib Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using tool basic safety precautions should a
4. FIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING SKU 47407 For technical questions please call 1 800 444 3353 Page 6 Parts List Part Description Part Description Te Ne e Air Pressure Switch e Base Pate amp Tank Part Description Gauge 50 Regulator Pressure Gauge Il NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts REV 01 03 03 06 REV 01 07 SKU 47407 For technical questions please call 1 800 444 3353 Page 7 Assembly Drawing gt I D CENTRAL PNEUMATIC LIMITED 1 YEAR 2 WARRANTY amp a Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability Warra nt standards and warrants to the original purchaser that this product is free from defects in materials y S W and workmanship for the period of one year from the date of purchase This warranty does not apply BZ to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations NNS outside our facilities or to lac
5. duct but must be supplied by the operator Unpacking When unpacking check to make sure the following parts are included If any parts are miss ing or broken please call Harbor Freight Tools at the number on the cover of this manual as soon as possible eu Ta we i On Off Switch Tire chuck Qas C SO Blow gun with tip REV 09 06 SKU 47407 For technical questions please call 1 800 444 3353 Page 4 Assembly 1 Attach the Coil Air Hose to the Air Outlet as shown below Regulator Pressure Gauge 46 4 n Regulator Pressure Gauge II 50 Pressure Release Valve lt a5 Coil Air Hose Regulator Adjusting Knob 53 2 Attach the Blow Gun with desired tip tire chuck or other user supplied attachment to the other end of the Coil Air Hose Operation Turning Compressor On 1 Plug the power cord into an electrical outlet with a grounding prong Note Only use a 115V electrical source 10 maximum variation 2 Push the On Off Switch to the ON position Allow the Tank to fill to 80 PSI before using With the Air Compressor turned on operation is automatic and under the control of the internal pressure switch Internal Pressure Switch Caution Do not make changes to the internal pressure level switch any change to the automatic On Off pressure levels will cause additional stress on the motor which may result in shortened motor life Doing so will void the warranty Using the Pressur
6. e Relief Valve The Pressure Relief Valve is used when decompression is needed quickly and efficiently 1 Press the On Off Switch to the OFF position 2 Pull onthe Pressure Release Valve ring to release pressure Caution Wear safety glasses The released air is under high pressure and can cause debris and dirt to fly as the air exits the tank REV 11 04 SKU 47407 For technical questions please call 1 800 444 3353 Page 5 Empty Air and Condensation The water spill valve Petcock 11 is located underneath the Air Tank shown in the photo on page 4 It must be used daily to release all trapped moisture from the tank It will also get rid of any condensation that may cause tank corrosion Warning Do not open the Water Spill Valve so that more than four threads are show ing 1 Push the On Off Switch to turn the compressor off 2 Unscrew the water spill valve Petcock 11 two to three turns only 3 When all pressure is released close the water spill valve again Maintenance 1 Purge the Air Tank daily of all air and moisture to prevent corrosion Store the Air Compressor in a clean and dry location 3 Check all air fittings for leaks before using PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBU TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALI
7. k of maintenance We shall in no event be liable for death injuries to my persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential N damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY KZ IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES RSS OF MERCHANTABILITY AND FITNESS A To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect a or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 AWS ANNA ZZ NA N N ANN SN NX D 7 h v NS F MMA SA SOSA AS ASS SS LA NSAISC RASA ANAS DAREN A AAR DARA REV 01 0
8. lways be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Do not use machines or power tools in damp or wet locations Don t expose to rain Keep work area well lighted Do not use electrically powered tools in the presence of flammable gases or liquids 3 Keep children away Children must never be allowed in the work area Do not let them handle machines tools or extension cords 4 Store idle equipment When not in use tools must be stored in a dry location to inhibit rust Always lock up tools and keep out of reach of children 5 Use the right tool for the job Do not attempt to force a small tool or attachment to do the work of a larger industrial tool There are certain applications for which this tool was designed It will do the job better and more safely at the rate for which it was intended Do not modify this tool and do not use this tool for a purpose for which it was not intended REV 02 04 11 04 02 05 07 06 01 07 SKU 47407 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 14 15 16 ihe 18 19 Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically non conductive clothes and non skid footwear are recommended when working Wear restrictive hair co
9. r operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the tool if any switch does not turn On and Off properly Guard against electric shock Prevent body contact with grounded surfaces such as pipes radiators ranges and refrigerator enclosures Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools Do not operate tool if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the tool Maintenance For your safety service and maintenance should be performed regularly by a qualified technician Use proper size and type extension cord If an extension cord is required it must be of the proper size and type to supply the correct current to the tool without heating up Otherwise the extension cord could melt and catch fire or cause electrical damage to the tool This tool requires use of an extension cord of 0 to 10 amps SKU 47407 For technical questions please call 1 800 444 3353 Page 3 20 21 Ze 23 24 25 capability up to 50 feet with wire size rated at 18 AWG Longer extension cords require larger size wire If you are using
10. vering to contain long hair Use eye and ear protection Always wear ANSI approved impact safety goggles Wear an ANSI approved dust mask or respirator when working around metal wood and chemical dusts and mists Do not overreach Keep proper footing and balance at all times Do not reach over or across running machines Maintain tools with care Keep tools sharp and clean for better and safer performance Follow instructions for lubricating and changing accessories Inspect tool cords periodically and if damaged have them repaired by an authorized technician The handles must be kept clean dry and free from oil and grease at all times Disconnect power Unplug tool when not in use Remove adjusting keys and wrenches Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in Avoid unintentional starting Be sure the switch is in the Off position when not in use and before plugging in Do not carry any tool with your finger on the trigger whether it is plugged in or not Stay alert Watch what you are doing use common sense Do not operate any tool when you are tired Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment and binding of moving parts any broken parts or mounting fixtures and any other condition that may affect prope
Download Pdf Manuals
Related Search