Haier LE22T3 Flat Panel Television User Manual
Contents
1. If there is no operation for a few seconds the display will automatically disappear The Lock Set menu is as follows Haier menu Change Password Tuning Lock off gt Preset Source lt off gt Preset CH lt off gt Source Lock Child Lock lt off gt Max Volume E gt 100 On Volume lt Ee gt 0 Unlock To set new password After entering the Lock Set menu press W to select the Change Password option and then press 4 gt to display the Change Password menu afterwards enter a new 4 digit password by pressing numerical keys and repeat entering this password once and finally select the option to be confirmed and press MENU to confirm indicating the successful change of password If the user does not want to change the password in halfway he may press MENU to exit from this menu kA Note The initial password is 0000 and the password setting will not be changed after executing the Unlock option O Tuning Lock Press A V to select the Tuning Lock option and then press 4 gt to set ON or OFF If set ON the Tuning Menu is not available in TV mode To make any operation related to the Tuning Menu it is necessary to enter the Lock Set menu to set 20 LED LCD television Owner s Manual Tuning Lock OFF or execute the Unlock option Preset Source Setting Preset Source may be set as Off TV AV Component HDMI PC and USB When the Preset Source is set as2. Y Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller 2 Make sure that two AAA alkaline batteries are loaded The batteries must be of the same type The batteries must be located properly The batteries are not rechargeable Make sure that there is no obstacle between the remote controller and television set LED LCD television Owner s Manual 7 Remote Control Function Remote Control Function The remote control cannot be operated unless the batteries are properly loaded When using the remote control aim it at the remote control sensor on the TV Function introduction 8 eee bs b E LED LCD television Owner s Manual 0000000000 OO OOOO GSOS SOOHSHHOO 00000 POWER SCAN Picture Mode FREEZE HDMI Sound Mode ARC SLEEP H LOCK Vl FAVORITE 0 9 SOURCE DISPLAY MUTE RECALL VOL CH MENU EXIT THUMBSTICK Up Down Left Right OK OK USB BACK REC TIMESHIFT HELP PLAY PAUSE REV FWD NEXT PREV TEXT MIX HOLD SUBCODE PIP SWAP 200M MOVE Press this key to start TV from standby mode press it again to return to standby mode Itis only available in TV mode Press this key continuously to se
3. 9596090600 00000321366 5 Haier OWNER S MANUAL LE19T3 LE22T3 LE19T3W LE22T3W LE24T3 L24K3 LED LCD TELEVISION Please READ this manual carefully before operating your TV and retain it for future reference 182 257 30 70g _ Q HR 091 054 wD 1b feat er Q HR 0903 002 ge xs e lam LE19T3 L24K3 0090509636 LEH ee A Pa isi EWE C01 A4 Haier OWNER S MANUAL LE191T3 LE22T3 LE19T3W LE22T3W LE24T3 L24K3 LED LCD TELEVISION Please READ this manual carefully before operating your TV and retain it for future reference Contents Contents Warning 3 Important Safety Instructions 4 Panel Control and Rear Terminals Control 6 Panel Control scccccsccieccscccccesestescoseconscoaservevesessosscess 6 Rear Terminals Control oss 6 Remote Control 7 Battery loading ss sse 7 Precautions 00 soon sss ss ss ssss strstr 7 Remote Control Function 8 FUNCTION introduction cccccscsssscssccsssssescscccees 8 External Equipment Connect
4. V to select the On Channel option Press 4 gt to set the On Channel or OFF Haier menu Curren Time lt 10 30 gt Off Time 00 00 Off On Time 00 00 Off On Channel lt 0 gt Remind Time 00 00 Off Remind Channel lt 0 gt Picture Sound Tuning K Function rE Adjust Timer Setting of Remind Time and Remind Channel The remind time and remind channel functions allow the TV to automatically enter the preset channel at preset time If the TV is AC off or forcible DC off the preset time will be cleared E Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press 4 gt to select the Timer menu afterwards press W to select the Remind Time option Haier menu Curren Time lt 10 30 gt Off Time 00 00 Off On Time 00 00 Off On Channel lt gt Remind Time 0 00 Off Remind Channel lt iiPicture s Sound Tuning xFunction ll Adjust Timer Press OK to enter the setting screen and then press A Y toselect ON or OFF if you select ON press 4 gt toset hour and minute and then press A V to adjust time After finishing time setting press OK or MENU to confirm Press A W to select the Remind Channel option and press 4 gt toset the found Function Menu Function Menu Set Press MENU on the remote control unit or MENU on the TV s front panel to display the
5. mMenu Button Volume Up Down Button _ Program Up Down O 0900000 0 Button g M Standby LCD oO gt LAUDIO R PC AUDIOIN PC IN H0O 00000 VIDEO LAUDIO R VIDEO LAuplo R W o oH 0 00 COMPONENT In Connect a component Video Audio device to Headphone Headphone audio output terminal these jacks Connect a USB flash drive to view PPEG2 AVIN Connect Video Audio out from an Video Audio USB videos JPEG images or listen to MP3 songs device to these jacks DIGITAL o PCN Connect the monitor output connector from a PC OUT COAXIAL Digital Coaxial output terminal to the jack AVOUT Video Audio output terminal HDMI connectasiona lo HONI DCN Connect the monitor output connector from a DC PC DVI AUDIO Connect a PC DVI Audio device to these jacks to the jack not available for the L24K3 model 6 LED LCD television Owner s Manual Remote Control Remote Control Battery loading 1 Slide open the cover of the battery compartment on the back of the remote controller 2 Load two 7 AAA alkaline batteries in the compartment plus and minus poles to respective mark 3 Replace the cover of the battery compartment Precautions As strong light may interfere the signals change your position to operate the remote controller if the television cannot be turned on or off as you expect
6. 4 gt to select the Audio icon afterwards press W to enter the option to be adjusted Press 4 to adjust Haier menu Volume lt ee gt 50 Balance lt gt 0 Digital tone Standard SRS TS XT lt Off gt AVL lt Off gt MAXX Bass lt Low gt Reset Picture s Sound Ef Tuning Function ri Adjust Timer Volume Press 4 gt to adjust the volume of a TV program 0 Balance This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position The intermediate value is 0 When indication value of Balance increases toward 50 sound of the right and left speakers becomes stronger and weaker respectively When indication value of Balance decreases toward 50 sound of the right and left speakers becomes weaker and stronger Digital tone This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received Select the mode of sound User Standard Music Theater If the User mode is selected press OK to enter the digital tone menu as shown in the below figure and then press 4 P to select a benchmark in the range of 50 15K from bass to treble afterwards press Specification and Format A V to adjust if a different benchmark is selected for adjustment the original adjustment data will be automatically cleared Haier menu Digital tone Standard is
7. H Lock menu is Off can the Channel menu be selected 14 LED LCD television Owner s Manual Haier menu Channel Edit Auto Search Prog Exchange ImlPicture Sound EX Tuning Function fl Adjust Timer press to select the Auto Search option press OK to enter the auto search menu afterwards press 4 gt to select the Confirm option and finally press OK to confirm the starting of auto search Haier menu Auto Search St Do you want to start auto search A Ok During auto search the scale value on the progress bar is continually increasing indicating the auto search is in progress After finishing the auto search the TV will play the channel starting the auto search To stop the search in halfway just press MENU OK and the TV will play the first searched channel Haier menu Auto Search Auto Searching Found Channel s 2 Frequency 25NHz 40 e Cancel Exchange Press MENU on the remote control unit or MENU on the TV s front panel to display main menu and then press 4 gt to select Tuning menu Press A to select the Prog Exchange option and then press OK to enter its submenu Press A VW to select the To Channel option and then press 4 gt tosetthefound to be exchanged to Haier menu Prog Exchange Current Channel lt 10 gt To Channe lt 20 gt Exchange icture Sound E Tuning K Function lt
8. TV after entering the Preset Channel menu press 4 gt to select the preset channel and the channel will be forcibly switched to the preset one upon turning the TV on when the Preset Source is set as other signal sources the TV will be forcibly switched to the preset source upon turning on For example when the Preset Source is set as YPpPr YCpCr the TV will be switched to YPpPr YCbCr upon turning on when set as OFF the preset function will be closed Preset Channel Setting Only when the Preset Source is set as TV can the Preset Channel option be available Press 4 gt to select preset channels from 0 254 Source Lock This function is used to prohibit watching a program from various external inputs e g AV and PC etc Press A V to select a certain option and then press 4 gt to setan external input lock ON or OFF If an external input lock is set ON after entering this mode the screen will display blue background with muting and a prompt Source Lock during Source Lock prompt Source Lock will remain if there is no other display on the screen To watch a program from a locked external input just enter Source Lock submenu to set corresponding status as OFF or execute the Unlock option in the Lock Set menu Child Lock Setting Press A V to select the Child Lock option and then press 4 PP toset ON or OFF If set ON this control key will not respond and the screen will display Child Lock when the key is press
9. the limitation of USB signal transmission distance it is recommended not to use USB patch cord in case of using the cord make sure that its length is not over 1m e Use high speed USB equipment in conformity with USB2 0 Interface Standard if USB equipment in conformity with USB1 1 Interface Standard is used the playing may be unsmooth Although many movie files are with such postfixes as avi and mpeg actually there are several formats in the files however the TV can only play some files in avi and mpeg formats Some files with the postfix dat are not movie files but data files commonly used in computers and they can not be played as movies Start Exit Streaming Media Playing System Press USB on the remote control unit to select the streaming media function Insert USB equipment into corresponding USB interface 2s after starting the system After entering the system menu press 4 gt on the remote control unit to select the required USB equipment and then press A W on the remote control unit to select the required file Press OK to enter the selected file To exit the streaming media playing system and watch a TV program you must return to the streaming media main menu at first to protect equipment and then press SOURCE to select TV or directly press USB to return to the TV mode LED LCD television Owner s Manual 21 Troubleshing and Specification Text Music EA OPicture Movie e S
10. the product Dont use or store inflammable materials near the product to avoid explosion or fire hazards a an IJ The antenna of the product should be away from electric cable to avoid electric shocks Always make sure that the televisionis well plugged as poor electric connection might cause fire Unplug the television use soft fabric never chemicals if you are going to make cleaning of the product Make sure that no water drops in the product Ooa DS Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid electric shocks or fire hazards Important Safety Instructions Don t place the product in a humid area to avoid fire hazards Never touch the plug when your hand is wet as this might cause electric shocks When antenna is used measures should be taken to prevent water from flowing down along the cable into the television The plug and electric cable must be kept clean to avoid electric shocks or fire hazards Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation LED LCD television Owner s Manual 5 Panel Control and Rear Terminals Control Panel Control and Rear Terminals Control This is a simplified representation of front panel Here shown may be somewhat different from your TV Panel Control 19 22 24 24 Source Button LE22T3W TV AV
11. the remote controller Failureiof display receiving window are blocked remote E bi difb 3 controller y other objects and if batteries are properly loaded Designate the item of color from the Picture menu and depress the volume No color button Keep the display and VCR weakcolor separate a reasonable space Activate or poor some functions to store picture picture brightness Make sure that the display and signal source are available and turned on Excessive brightness Adjust brightness or contrast or darkness Picture toobigor Adjust the setup of sizes small One speaker Balance the sound in the menu failure Slight sound 5 orn It is anormal phenomenon display Note D Do not leave the television with static picture in an extended period as it may result in residual image on your television screen P Note D Production of the screen requires high and precision technologies However there might be some dank or bright red blue or green spots or some anomaalistic stripes or spots This is not defect If the TV set is used in an area 2 400 meters above the sea level where the air pressure is below 750hpa the picture on the screen maybe affected and a muffled sound might be produced These phenomena might happen in the area 1 500 meters above the sea level This is resulted from difference between air pressures inside and outside the display This is not a defect covered by the limited warranty Basic
12. EG2 some mpeg files MPEG1 dat and some mpeg files RealVideo e Text x Txt kA Note D Due to the particularity of file coding some files may be unable to be read Supported equipment Support the equipment that supports Mass Storage Protocol and whose file system is FAT NTFS FAT16 FAT32 such as some USB disks mobile hard disks card readers MP3 players and digital cameras If USB equipment could not be identified due to unsupported file system please format the equipment to the above mentioned file system The external card reader supports most of the digital cards in the current market the types of digital cards that can be read are relevant to the performance of selected card reader you may attach standard mobile hard disks working voltage 5 0V working Specification and Format current not higher than 500mA during media playing do not pull out storage media otherwise it may cause system halt damage the files in storage media or damage USB equipment sometimes the TV may halt due to overhigh information error rate in which case you should restart the system there are a lot of nonstandard USB mobile equipment in the market they may not be identified when connected to the streaming media playing system the above phenomena may also occur on computers and are not the TV s fault To achieve smooth playing ensure the following e The file code rate should be lower than 300KB S e Due to
13. ICTURE Emotional amp New Life USB MOVE OK G BACK OPTION O To exit playing just press BACK repeatedly Playing a Movie O After entering USB main interface press 4 gt to select a harddisk partition and then press amp W to select the Movie option Text nc Music iC Picture Se Settings El Press OK to confirm the selection and enter the movie playing interface Press 4 to change page and press A W to select the movie you want to play and then press OK to enter the playing display interface e Press 4 P toselect the last or next movie 1 3 MOVIE emotional amp New Lit e USB GMOVE OK BACK BOPTION O To exit playing just press BACK repeatedly Note 4 The menu display varies with the number and names of files in your equipment Playing Music After entering USB main interface press 4 gt to select a harddisk partition and then press to select the Music option Text sJ Picture 6 Movie El Press OK to confirm the selection and enter the music playing interface Press 4 to change page and press A to select the music you want to play and then press OK to play the music 00 00 46 00 04 24 E fig Dig world mp3 4 53 MUSIC tnotionai amp New Life USB MOVE of BAck OPTION To exit music playing just press BACK repeatedly Text D After entering USB main interface press 4 gt to
14. USB No available No available Fast Reverse only for USB Fast Reverse only for USB Fast Reverse only for USB Fast Forward only for USB Next only for USB Previous only for USB No available No available No available No available No available No available Fast Reverse only for USB No available External Equipment Connections External Equipment Connections Antenna Connection Antenna or Cable Service without a Cable Box Connections Foroptimum picture quality adjust antenna direction if needed Single family Dwellings Houses Connect to wall jack for outdoor antenna outdoor antenna not supply 75Qstandard coaxial type Multi family Dwellings Apartments Connect to wall antenna socket 75Q coaxial cable 300Q twin lead cable T On Om Plug T i additional purchase gt F Antenna adapter not supply bbe vl vi A Note It is recommended that you d better use 75 coaxial cable to remove C the disturbance caused by airwave Don t bind antenna cable and electric wire together T To improve picture quality in a poor signal area purchase and install a signal amplifier m Ifthe antenna needs to be split for two Tv s install a MA 2 WaySignal Splitter in the connections PE VHF UH Ifthe antenna is not installed properly contact your ae Signal dealer fo
15. art UP or DOWN fine tuning until obtaining a relatively good picture effect The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough Normally the optimal picture effect can be obtained without fine tuning when watching TV programs and fine tuning is to meet the need of adjusting a certain program O Color system Press A W to select the Color Systems option and then press 4 gt to select correct color system The TV is designed with three systems for your choice i e Auto PAL SECAM and NTSC Generally the system is set as Auto and it is not necessary to make an adjustment The system is normally set as Auto during auto search Sound system The TV is designed with four systems for your choice i e D K M B G and I Generally it is not necessary to adjust the system The system is normally set as DK during auto search O Skip When the skip is set ON the channel will be skipped when pressing CH or CH v and only can be selected by pressing 0 9 numerical keys If you want to recover the skipped channel 1 Use Direct digit Choosing button to select the number of the channel to be recovered 2 Do the above steps again 3 Press 4 gt to set Skip as Off Automatic search E Press MENU on the remote control to display main menu and then press 4 gt to select Tuning menu Note Only when Tuning Lock in the
16. aying System 00 21 Start Exit Streaming Media Playing system 21 Operating Method of Streaming Media Menu 22 Playing a Picture ee 22 Playing a Movie P Playing MUSIC ss Text EEE O EE EES SOULS a0 Maintenance 23 Troubleshooting 24 Specification 24 Format 25 Warning WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL To avoid electric hazards it is strongly suggested that the back cover not be opened as there is no any accessory inside the casing If necessary please contact authorized after sales services A lighting flash mark in a triangle A potentially hazardous situation which if not avoided could result in serious injury by high voltage An exclamation mark in a triangle Major part or accessory of which technical specifications must be followed if it is to be replaced WARNING To avoid fire or electric hazards never place your television receiver in an area with heavy moisture Attention should be paid to avoid accidental scratches or impacts onto the screen CAUTION Please read this manual carefully before using your television and keep this manual ina good place for future reference To achieve the best performance of your television read this User s Manual carefully and properly store it for future reference In
17. bn nA A A A AAA A Music Theater 0 6dbvvvvvv Vv vv 50 75 100 300 1K 3K 5K 10K 15K HE Picture Sound Tuning Function just Timer O SRSTS XT The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV s speakers AVL Automatic Volume Limit This will reduces the differences in volume level among broadcasters O MAXX Bass To adjust the super bass Press 4 gt to select super bass off low or high Medium Reset Return to factory default settings Timer Functions Setting of Current Time The current time is calculated from the moment upon turning the TV on At first check whether the time indicated on the TV s clock is consistent with the standard time of your time zone if not adjust the clock as follows E Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press q gt to select the Timer menu afterwards press amp W to select the Current Time option Press q gt to set hour and minute Press A V to adjust the time After finishing time setting press OK or MENU to confirm LED LCD television Owner s Manual 17 Troubleshing and Specification Haier menu Curren Time lt 10 30 uae Off Time z On Time eld On Channel lt 000 gt Remind Time Gi Remind Channel lt 000 g
18. ed if no other operation is made the display will automatically disappear later To resume Child Lock function just enter the Lock Set menu to set Child Lock OFF or execute the Unlock option Max Volume Setting Press A to select the Max Volume option and then press q gt to freely adjust the max volume within the range of 0 100 After finishing the setting the max volume in the Volume menu will not exceed the preset max volume for example if the preset max volume is 30 the volume in the Volume menu can not be increased any longer upon reaching 30 if the preset max volume is less than the value in the Volume menu the latter will decrease along with the decrease of preset max volume 0 On Volume Press A V to select the Power on Volume option and then press 4 gt to freely adjust the volume within the range of 0 100 O Unlock Setting Press A V to select the Unlock option and then press j toclearall the lock settings namely set all the lock setting options as OFF the Preset Channel is set as OFF and max volume returns to 100 except password Streaming Media Playing System Note D The diagrams in the following section are schematic and only for your reference Please see the actual product if necessary 0 Supported file formats e Picture JPEG e Music Mp3 8 320kbps WMA 32 192kbps AAC 16 576kbps e Movie MPEG4 x avi files in accordance with Div 4 x 5 x Protocol MP
19. ettings Operating Method of Streaming Media Menu Press A to scroll through main menu or submenu and select your desired option Press OK to confirm your selection Press REV FWD to achieve the FF fast forward and FB fast back of the movie or music being played Press PLAY PAUSE to pause playing and press it again or press OK to continue playing Press ZOOM to magnify pictures in zoom mode press 4 gt and A V to move the picture Press HELP to display or exit the screen display information while playing oO oo o B Press BACK to stop playing or return to the previous menu and press BACK repeatedly to return to the main menu Playing a Picture DO After entering USB main interface press 4 gt to select a harddisk partition and then press A W to select the Picture option Text ic Music Movie e Settings El Press OK to confirm the selection and enter the picture playing interface Press 4 gt to change page and press amp W to select the picture you want to play and then press 22 LED LCD television Owner s Manual OK to enter the playing display interface Press ZOOM to magnify the picture and then press gt A VW Tto move the picture e Press 4 P toselect the last or next picture e Press to rotate the picture 5380L 3000 rrr 1024 768 Kaoaya fm 1024 768 16001200 jg 1024 768 fm 1024 768 Hanapoo fm 1024 768 P
20. formation of screen displays and figures in the User s Manual may vary due to technical innovations EI CAUTION Unauthorized disassembly of this product is prohibited LED LCD television Owner s Manual 3 Important Safety Instructions The product should be tightly fixed to avoid drop damages and even fire Do not locate the product close to water or oil which may cause fire hazards Do not use damaged or worn electric plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards The product must be placed on a solid and stable surface to avoid collapse Keep the product away from a transformer or heat source to avoid fire hazards le LED LCD television Owner s Manual Important Safety Instructions To avoid fire hazards do not use this product under direct sunlight or closely to heat sources ube Unplug the power supply and antenna of the product when there is a rainstorm especially thy lp jy j p pe 7 Lv yf AZ z 7 7 74 Thunderstorm Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards Contact authorized after sales service if technical service is needed a ofa Disconnect the product from power supply and contact authorized after sales service if abnormal sound is heard in
21. i Adjust Time O After adjusting the current channel and the found to be exchanged to press A W to move the cursor to the Exchange option and then press OK to start exchange and exchange the program on current channel to the channel you set for exchange Watching TV Program You can watch TV program in a presetting channel How to select the desired program 0 Using Program number buttons Directly enter the channel number with the numeric keypad on the remote control If to select channel numbers of double digital or three figure press continuously the numeric buttons in three second Using CH CH v buttons Press CHA to select a channel number in number increasing direction Press CH v to select a channel number in number decreasing direction How to select the desired sound Press VOL buttons on the remote or the front of the TV set to adjust the volume level The range is 0 100 When the volume buttons are pressed the volume level is displayed automatically on the TV screen Mute Setting 0 Press MUTE button on the remote control and a icon will display on the screen At this time the sound of the TV set is turned off Specification and Format If you want to recover the sound press MUTE button again or directly press VOL button Quick program view 0 Suppose that you previously watched aTV program on Channel 8 but now you are watching aTV program on Channel 18 as shown in the bel
22. ions 9 Antenna Connection soso sons sss esses sss 9 Choose Your Connection 00s nnn 10 VCR CONNEC ON neiseina ania 10 DVD Setup ee 10 HDMI or DVI Setup ied PC Setup cecssscssseceeenes 11 Monitor Out Setup 12 Connecting Headphones cccsccseseseseeeee 12 Power source Basic Receiving and Playing Operations 12 Switching ON OFF the TV set ee 12 Switching ON OFF the TV Set csr 13 Choose the Menu Language Choose the Input source Searching Channel ee 13 Channel Edit i 13 Automatic search 14 EXchange es 14 Watching TV Program ee 15 How to select the desired Prograi ee sssscccssesceeseeees 15 How to select the desired sound we 15 Mute Setting eee wee 15 Quick program VieW 15 2 LED LCD television Owner s Manual Picture Control Functions ve 15 How to select the picture Mode sse 15 How to customize your own picture status 16 Sound Control Functions pe 16 How to choose audio Mode sssssssssssssseressssssreesssssssessse 16 How to customize your own audio status 17 Timer Functions es wee 17 Setting of Current Time 17 Setting of ON OFF Time 18 Setting of On Channel ese 18 Setting of Remind Time and Remind Channel 18 FUNCTION MeNU cccccccccccscsccesccccscccesscccoscccoes 19 Function Menu Set 19 Adjust MenUs er 20 LOCK SetupD oo 20 How to use the password functiom ss ssssssssssss 20 Streaming Media Pl
23. jacks on the TV as shown in the figure HOMLIN How to use O Turn on the DvD player insert a DVD Use the SOURCE button on the remote controland then press W button to to select COMPONENT mode press the PP button to confirm Press Play button on external equipment for program play O Refer to the DVD player s manual for operating instructions HDMI or DVI Setup To watch digitally broadcast programs purchase and connect a digital set top box How to connect e Use the TV s COMPONENT Y Pb Cb Pr Cr INPUT jacks VGA or HDMI port for video connections depending on your set top box connections available Then make the corresponding audio connections How to use Turn on the digital set top box Refer to the owners manual for the digital set top box Use SOURCE on the remote contralto select PC or HDMI Y Pb Cb Pr Cr mode Press Play button on external equipment for program play VIDEO L AUDIO R AVI HDMI DVI OUTPUT PC Setup How to connect Use the TV s PC IN port for video connections Then make the corresponding audio connection If using a sound card adjust the PC sound as required How to use Turn on the PC and the TV Turn on the display by pressing the POWER button on the TV s remote control Use SOURCE on the remote control to select PC source Check the image on your TV There may be noise associated with the re
24. lect the picture mode Press once to display a frozen image of the current program but audio continues Press again to return to the program Press to select a device connrcted to the HDMI input Press this key continuously to select the sound mode Press this key to select the screen display proportion Displaying the sleep time Refer to the Functional Description on Page 20 No available Press to open the favorite channel list in TV These keys are used to select a channel Press this key to open close signal source options menu Press to display the TV status information on the top of the TV screen Press this key to mute the sound press it again to activate the sound The sound may be activated by turning the TV on again or increasing the volume Press this key to display the Special Function Menu it functions when special modules are inserted Used to adjust the volume when the screen menu is closed Used to select a TV channel when the screen options menu is closed specifically press CH to decrease the channel and press CH to increase the channel Press this key to display or exit the main menu Clears all on screen displays and returns to TV viewing from any menu PAllows you to navigate the on screen menus and adjust the system setting to your preference Press OK buuton to confirm the selection Press this key to confirm the selection Press this key for quick switching of streaming media Back button only for
25. main menu and then press j to select the Time menu Press A V to select the option to be adjusted and then press 4 gt to adjust it Language Two languages i e Simplified Chinese and English are available for your choice Menu timeout The option is for adjusting the menu display time Press 4 gt to set the desired time 5 15s Haier menu Language lt English gt Menu Timeout lt 15s gt Picture Optimize Background lt On gt Black Stretch z On gt Picture E 3 Tuning e E CEON Picture Optimize e Press A to select the Picture Optimize option e Press gt to enter the submenu e Press amp W to select theDCDI DNR 3D Comb Filter to be adjusted and then press 4 gt to select ON or OFF e Press VW to select the Color Management to be adjusted and then press 4 gt to select Low Medium High Off Haier menu Picture Optimize DCDI lt On DNR lt Low Color Management lt On 3D Comb Filter lt On W OMIN EN Picture s Sound 3 Tuning W Function M Adjust Timer Blackground Press 4 gt to set ON or OFF if you select ON the TV screen will be black if no signals are available Specification and Format 0 Black Stretch Adjust Menu The TV can be used as a display and you may adjust relevant settings Press SOURCE to switch the signal input to PC mode E Press MENU to display the screen main menu and then press 4 gt to select the Adju
26. mmendation DVI connection input format Sequence Nugaber Resolution Refresh Frequency Hz 1 640 480 60 2 800 600 60 3 1024 768 60 Recommendation HDMI connection input format aes Format Refresh Frequency Hz 1 480i 480p 60 2 576i 576p 50 3 720p 50 60 4 1080i 50 60 LED LCD television Owner s Manual 25
27. mple to help you with the TV operation Switching ON OFF theTV set 0 First connect power cord correctly and the power indicator will light Press POWER on the remote control again if you want to exchange to standing by status please press down POWER on the remote control Disconnect the power supply or unplug the television if it is intended to completely cease the television performance Choose the Menu Language When you satisfied with your set for the first time you must select the language which will be used for displaying menus and indications f Press MENU and 4 gt to select Function menu Press A button to select Function menu Select a particular language by pressing j repeatedly When you satisfied with your choice press MENU to return to normal viewing Haier menu Language lt English gt Menu Timeout lt 15s Picture Optimize Background lt On gt Black Stretch lt On imi Picture s Sound 3 Tuning kFunction i Adjust Timer Choose the Input source If the TV is not in TV mode press SOURCE on the remote control unit and signal source menu will be displayed on the TV screen as shown in the below figure Press A V toselect the TV option and press gt or OK to confirm the switching to TV input terminal After switching the signal source menu disappears and at the upper right corner of screen displays the information of current signal source Pressing
28. n the TV speakers off Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the room Plug a set of headphones Into the 3 5mm mini jack socket on the rear panel of the set Note D Prolonged use of headphones at a high volume may damage your hearing D You will not receive sound from the speakers when you connect headphones to the system 12 LED LCD television Owner s Manual Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC Insert the AC cord plug into a standard polarized AC outlet Wider Hole and Blade AC Outlet re Polarized AC Cord Plug Note D Never connect the AC line cord plug to other than the specified voltage Use the attached power cord only D If the polarized AC cord does not fit into a non polarized AC outlet do not attempt to file or cut the blade It is the user s responsibility to have an electrician replace the obsolete outlet D If you cause a static discharge when touching the unit and the unit fails to function simply unplug the unit from the AC outlet and plug it back in The unit should return to normal operation Polarized AC Cord Plug Basic Receiving and Playing Operations Switching ON OFF the TV set In the manual the OSD on screen display may be different from your TV s because it is just an exa
29. n the power off and unplug the power cord before you begin any cleaning Cleaning the Screen O Here s a great way to keep the dust off your screen for a while Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent Wring the cloth until it s almost dry and then use it to wipe the screen Make sure the excess water is off the screen and then let it air dry before youturn on yourTV Cleaning the Cabinet To remove dirt or dust wipe the cabinet with a soft dry lint free cloth Please be sure not to use a wet cloth Extended Absence If you expect to leave your TV dormant for a long time such as a vacation it s a good idea to unplug the power cord to protect against possible damage from lightning Or power surges Troubleshooting For the sake of time and cost it is strongly recommended that you checkout the problem by yourself according to the instructions listed hereunder before contacting the after sales service for technical assistance Problem Possible remedies Turn onthe power supply Properly No plug theTV setto the powersocket icture Check to see if the power cable of other py eound appliance is plugged in the TV set Make sure that the power cable of the TV set is properly connected Problem Possible remedies Pee Depress the volume button no sound Check out theaudio frequency input signals 24 LED LCD television Owner s Manual Check to see if
30. ow figure 18 you want to return to Channel 8 just press RECALL Flashback once B it you want to return to Channel 18 again just press RECALL Flashback once again P Note D This function is only available in TV mode Picture Control Functions This means the adjustment of specific contents in the picture if already in normal condition it is not necessary to make any adjustment Due to different TV signal inputs some items may need to be adjusted The following makes a description by only taking TV signal as an example How to select the picture mode 0 Press MENU to display main menu on the screen and then press 4 gt to select the Picture menu afterwards press A V to enter the option to be adjusted Press A to move the cursor to the option to be adjusted and then press 4 gt to select Standard Vivid Soft User You can also press P MODE on the remote control to LED LCD television Owner s Manual 15 Troubleshing and Specification select Standard Vivid Soft User mode Standard The picture brightness and hue are moderate Vivid The picture is vivid bright and dynamic Soft The picture is soft and in light color O User The picture effect is set by yourself to your preference How to customize your own picture status E Press MENU to display main menu on the screen and then press 4 gt to select the Picture menu afterwards pre
31. r assistance Amplifier Note D All cables shown are not included with the TV LED LCD television Owner s Manual 9 External Equipment Connections Choose Your Connection There are several ways to connect your television depending on the components you want to connect and the quality of the signal you want to achieve The following are examples of someways to connect your TV Choose the connection which is best for you VCR Connection To avoid picture noise interference leave an adequate distance between the VCR and TV PC DVI AUDIO IN Ex Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number Connection Option 2 E Connect the audio and video cables from the VCR s output jacks to the TV input jacks as shown in the figure When connecting the TV to VCR match the jack colors Video yellow Audio Left white and Audio Right red BI insert a video tape into the VCR and press PLAY on the VCR Refer to the VCR owner s manual Select the input source with using the SOURCE button on the remote control and then press A Y button to select the source press the gt button to confirm 10 LED LCD television Owner s Manual DVD Setup How to connect 0 Connect the DVD video outputs Y Pb Cb Pr Cr to the COMPONENT Y Pb Cb Pr Cr input jacks on the TV and connect the DVD audio outputs to the AUDIO
32. select a harddisk partition and then press to select the Text option El Press OK to confirm the selection and enter the text playing interface Press A v 4 toselect the text you want to read and then press OK to play the text reading interface Press 4 gt to change page and press BACK to exit the reading interface Specification and Format E Folder a E New documen tx ake leane eal tiit mantal E Newdocumen__ txt_3KB 0aneflo Qefole Mini 0om tele tition an00 ee0 to mandal in a 0oo0 nale fa fite te fdent el 2 2 TEXT emotionaian ewtie USB MOVE OK BACK BOPTION O To exittheText mode just press BACK repeatedly Settings O After entering USB main interface press W to select the Settings option E Press OK to confirm the selection and enter the settings selection interface and then press A V to select the required options USB MOVE ENTER BACK SETTING Emotional amp N ew Li D BGM Auto Play Select on or off Bubtitle Auto Play Select on or off D Photo Slide Time Set the scan speed of pictures to be scanned in slide form There are three options Short Long Press 4 gt to select the desired option Maintenance Early malfunctions can be prevented Careful and regular LED LCD television Owner s Manual 23 Troubleshing and Specification cleaning can extend the amount of time you will have your new TV Be sure to tur
33. solution vertical pattern contrast or brightness in PC mode If noise is present change the PC mode to another resolution External Equipment Connections change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear If the refresh rate of the PC graphic card can not be changed change the PC graphic card or consult the manufacturer of the PC graphic card kA Note D Avoid keeping a fixed image on the TV s screen for along period of Time The fixed image may become permanently imprinted on the screen D The synchronization input form for Horizontal and Vertical frequencies is separate D To obtain the best picture do not play the USB YPbPr HDMI or PC source at the same time LED LCD television Owner s Manual 11 External Equipment Connections Basic Receiving and Playing Operations Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor Connect the second TV or monitor to the TV s AV OUT See the Operating Manual of the second TV or monitor for further details regarding that device s input settings VIDEO L AUDIO R A EE BR ON E 3 J E J N SVIDEO iy VIDEO L AUDIO R Note L Component PC HDMI input sources cannot be used for Monitor out D When connecting with external audio equipments such as amplifiers or speakers please tur
34. specification and parameter Power 100 240V 50 60Hz Color System PAL NTSC SECAM Stand by Consumption LE Video Input USB AV Component HDMI or PC Operating temperature range 5 C 35 C Operating humidity range 20 80 Storage Temperature 15 C 45 C Storage Humidity 5 90 non condensing Environmental condition If the storage temperature is lower than 0 C please first lays the machine aside after in the operating temperature environment carries on restores 2 hours then electrifies the use again protects your television not to receive the damage Owners manual x1 Remote Control x1 Alkaline battery x2 This is only available for certain models please refer to actual products Accessories Product main size contain stand Power A HEA ee nex 460x160x350mm 3 2Kg 460x160x350mm 3 2Kg LE24T3 L24K3 Note J Design and specifications are subject to change without notice The dimension in this manual is a approximation 528x160x388mm 3 8Kg 572x170x413mm 4 2Kg 585x190x434mm 5 3Kg 3 Specification and Format Recommendatory HDTV SDTV YPbPr YCbCr format Kamper Format Fregueney z 1 480i 480p 60 2 576i 576p 50 3 720p 50 60 4 1080i 1080p 50 60 Recommendation PC connection input format sequence H Frequency V Frequency number sormat KHz Hz 1 640 480 60Hz 31 5 60 2 800 600 60Hz 37 88 60 3 1024 768 60Hz 48 36 60 Recommendatory Reco
35. ss W to enter the option to be adjusted El Press amp to move the cursor to the option to be adjusted and then press 4 PP to adjust it to your desired effect Haier menu Contrast m gt 50 Brightness m gt 50 Color m gt 50 Sharpness lt mm gt 50 Tint EE gt 0 Picture Mode lt Standard gt Aspect Ratio lt Full Screen gt Palette Standard Reset Il Picture s Sound f Tuning K Function Adjust Timer Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged Brightness This will adjust the light output of the complete picture which will mainly affect the darker areas of the picture Color This will adjust the saturation level of the colors to suit your personal preference Sharpness This will adjust the sharpness of fine details in the picture Tine Allows you to select the color mix Tine of the picture Picture Mode Select the mode of picture Standard Vivid Soft User 16 LED LCD television Owner s Manual Aspect Ratio Select the mode of Aspect Ratio Full screen 4 3 Zoom Cinema Panorama Palette Press A to select the Palette option and then press gt to enter its submenu and finally press A V toselect a toner pattern from six patterns User Standard 6500K 7300K 8500K and 9300K to your color preference Normally the Standard mode is selected If the User mode is selec
36. st menu as shown in the below figure Haier menu Image Position H Size lt gt 5 V Size lt gt 5 Auto Adjust Clock lt es gt 128 Phase lt me gt 0 Reset I Picture a Sound Ef Tuning K Function Adjust Timer E Press amp to select the option to be adjusted Press PP to adjust it Image Position This is used to adjusting H Position and V Position H Size Vertical and Horizontal position of picture can be djusted in this item v CI V Size 0 O Vertical and Horizontal position of picture can be adjusted in this item O Auto Adjust Vertical and Horizontal position of picture can be adjusted in this item O Clock This is used for adjusting the phase of pixel clock in PC mode Phase This is used for adjusting H Position and V Position as well as relative parameters in PC modes Reset Return to factory default settings LED LCD television Owner s Manual 19 Troubleshing and Specification Lock Setup The television has the function of security default lock Password needs to be entered when the program lock mode is to be set How to use the password function Press H LOCK the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys if the password is correct the user enters the Lock Set menu if incorrect the user is required to enter a password again
37. t Im Picture a Sound Tuning W Function rB Adjust Timer Setting of ON OFF Time This function allows the TV to automatically turn on or enter standby mode upon reaching the preset time E Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press 4 gt to select the Timer menu afterwards press A W to select the On Time or Off Time option Press OK to enter the setting screen and then press A to select ON or OFF if you select ON press PP toset hour and minute ON indicates the On Off Time function is enabled while OFF indicates the function is disabled Haier menu Curren Time lt Off Time 00 00 off On Time Off On Channel lt 0 gt Remind Time 00 00 Remind Channel lt 0 gt I Picture Sound fi Tuning W Function ri Adjust Timer After finishing time setting press OK or MENU to confirm kA Note D After setting the On Off Time function if the TV is AC off or forcible DC off the function will be automatically cleared Setting of On Channel This function is used in combination with the On Off Time function When the TV turns on upon reaching the On time it automatically enters the preset channel 18 LED LCD television Owner s Manual E Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press 4 gt to select the Timer menu afterwards press
38. ted press 4 gt to enter the palette menu as shown in the below figure and then press 4 gt to select a benchmark in the range of 2500K 15000K from warm color to cold color afterwards press amp W to adjust if a different benchmark is selected for adjustment the original adjustment data will be automatically cleared Haier menu Palette Standard HON AA AAAAAA Warm1 Warm2 Cool1 z Cool2 User DN NANM NMEN N VV N 2500K Sa00K S60OK 6500K 7300K W500K 9900K 12000K 15000K ml Picture s Sound Tuning a E Adjust Timer Reset Return to factory default settings Sound Control Functions How to choose audio mode E Press MENU to display main menu on the screen and then press 4 gt to select the Sound menu afterwards press W to enter the option to be adjusted Press A V to move the cursor to the option to be adjusted and then press 4 gt to select User Standard Music Theater mode O User A Spare setting that can be adjusted to personal tastes Standard Normal sound with moderate bass and treble setting Music Designed the sound to best suit music programs O Theater Enables extra bass and treble to enhance the movie experience You can also press S MODE button on the remote control to select User Standard Music Theater mode How to customize your own audio status E Press MENU to display main menu on the screen and then press
39. this key repeatedly can exit from the signal Specification and Format source menu In case of no other operation the signal source menu will automatically disappear upon reaching the OSD disappearance time preset in the main menu TV AV Component 4 Y MOVE OK P gt OK e Searching Channel In this section how to use the remote control to set channel is explained You can also use buttons on the TV set to set channel Channel Edit E Press MENU on the remote control unit or MENU on the TV s front panel to display main menu and then press 4 gt to select Tuning menu Haier menu Channel Edit Auto Search Prog Exchange Picture Sound Tuning YxFunction Adjust Timer Press A V to select the Channel Edit option and then press OK to enter submenu ml Picture s Sound 3 Tuning Function fille Adjust Timer LED LCD television Owner s Manual Haier menu Channel Edit Search cown 40 00MHz Fine Tune lt 40 00MHz gt Color System lt PAL gt Sound System lt DK gt Skip lt ON gt Troubleshing and Specification 0 Search Press A V to select the Search option and finally press 4 P to start manual search Upon finding a program the search will automatically stop and the program will be stored onto the current channel You may stop the search by pressing OK or MENU Fine Tune Press amp W to select the Fine Tune option and then press 4 PP to st
Download Pdf Manuals
Related Search