Gear Head 7DPF200 Digital Photo Frame User Manual
Contents
1. Digital Photo Frame 7 LCD Model 7DPF200 User s Manual PID 161292 109239 Rev 07072 All brand name and trademarks are the property of their respective owners USER S RECORD To provide quality customer service and technical support it is suggested that you keep the following information as well as your store receipt and this user s manual Date of Purchase Model Number Serial Number Product Rev Number located below the UPC on the package FCC RADIATION NORM FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission FCC rules FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in television reception which can be determined by turning the equipment off and on The user is encouraged to try and correct the interference by one or more of the following measures Reorientorrelocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is con2. The RMA number must be prominently displayed on the outside of the shipping carton and the package must be mailed to Gear Head postage prepaid
3. while a photo is displayed manually a photo is displayed manually changed setting in the setup screen Press to navigate up and down or to view previous or next photos while photo is being displayed manually These buttons can also be used to move the photo up or down after a photo has been zoomed in COMA the right or left after a photo has been zoomed in Built in Control ENTER UP DOWN qr eo ee u ON OFF SWITCH LEFT RIGHT MENU ESC ON OFF SWITCH Power ON OFF ENTER Press to select an option or a photo Press to save a changed setting in the setup screen MENU ESC Press and hold to open the setup screen or the control menu when a photo is being displayed manually Press to function as the ESC button on the Remote Control UP DOWN Press to navigate up and down or to view previous or next photos while photo is being displayed manually These buttons can also be used to move the photo up or down after a photo has been zoomed in LEFT RIGHT Press to navigate left and right or move the photo to the right or left after a photo has been zoomed in HARDWARE INSTALLATION 1 Attach the enclosed Stand onto the back of your Digital Photo Frame with a screw driver not included 2 Connectthe power jack of the enclosed AC Power Adapter to your Digital Photo Frame and plug the other end into an electric outlet 3 Place your Digital Photo Frame on a flat and steady surface 4 Your Digital Photo
4. Digital Photo Frame to turn off automatically according to the time limit or select Off to disable this function Select this to show the system information for your Digital Photo Frame CONNECTING TO A COMPUTER 1 Make sure all memory cards have been removed from your Digital Photo Frame 2 Turn on your computer 3 Plug the USB mini B connector end of the enclosed USB Cable to your Digital Photo Frame 4 Plug the USB A connector end of the USB Cable into an available USB port on your computer 5 Your computer will detect and install the necessary drivers automatically 6 Your Digital Photo Frame can now be used as a Card Reader 11 Gear Head LLC warrants that this product shall be free from defects in materials and workmanship one year If the product is defective Gear Head LLC s sole obligation under this warranty shall be at its election subject to the terms of this warranty to repair or replace any parts deemed defective This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE TERMS OF THIS WARRANTY UNLESS OTHERWISE PROHIBITED BY LAW Exclusions To the fullest extent permitted by law Gear Head LLC expressly disclaims and excludes from this w
5. Frame is now ready to be used USING THE DIGITAL PHOTO FRAME 1 Make sure that you have properly connected the AC Power Adapter refer to the Hardware Installation instructions above if necessary 2 Carefully insert your memory card into the proper slot as shown below following the orientation guide on the memory card 3 Turn on your Digital Photo Frame and the below screen will appear 4 Use the enclosed Remote Control or the Built in Control and select the icon on the left to enter the Card Selection Menu Choose the media card you want to view the photos stored in the selected card will be displayed on the screen as thumbnails 12 thumbnails can be shown on screen at one time 5 Select the photo you want to view by pressing the Enter button on the Remote Control or on the Built in Control Pressing the MENU button on the Remote Control will show the options below a Rotate photo clockwise 90 degrees Rotate photo counterclockwise 90 degrees Opens the Settings Menu select this to choose the language you want your Settings menu to be Select this to set the time interval between pictures for AUTOPLAY mode The time limit can vary from 3 seconds to 60 seconds displayed onscreen displaying all of the photos as thumbnails at the same time expanding to the full screen size of your Digital Photo Frame Select this to set the LCD power saving mode Select the time for your
6. arranty any liability for damages including but not limited to general special indirect incidental consequential aggravated punitive or exemplary damages and economic loss even if Gear Head is informed of their possibility third party claims against you including for any loss or damages and claims or damages related to loss of or damage to your records or data This warranty does not apply to any product the exterior of which has been damaged or defaced This warranty will be voided by misuse improper physical environment improper repair acts of God war or terror commercial use and improper service operation or handling Technical Support Gear Head M provides Technical Support Monday Friday from 9 00 am 5 30 pm Eastern Time Before calling please make sure you have available the Model located on the front page of your User s Manual and information regarding your computer s operating system Please contact our technicians at 1 866 890 7115 Return Merchandise for Service Any claim under this warranty must be made in writing to Gear Head LLC at the address provide by our technician within 30 days after the owner discovers the circumstances giving rise to any such claim and must include a copy of this warranty document a receipt or copy of your invoice marked with the date of purchase and the original packaging You may obtain service by calling the technician for a Return Merchandise Authorization RMA number
7. nected to CAUTION The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment PACKAGE CONTENTS Your new Digital Photo Frame will ship with the following items Digital Photo Frame 7 LCD Remote Control AC Power Adapter USB Cable User s Manual Warranty Information SYSTEM SPECIFICATIONS Your new Digital Photo Frame complies with the following specifications Screen Dimensions 7 0 inches Resolution 480 x 234 Brightness 250 cd m Contrast 200 1 Photo File Format JPEG Memory Card Formats SD MMC MS or CF Usage Options Manual Remote Control or Slideshow Power Supply AC 100 120V DC 12V Operating Temperature 5C to 50C Max Power Consumption 12W Supported Operating Systems Windows 2000 XP Vista Mac OS 10 3 or Above HARDWARE DESCRIPTION Display Screen AC Power Adapter Remote USB Cable Photo Frame Control Stand CF Card Slot USB Port Power Jack SD MMC MS Card Slot Remote Control Press to open the control menu when a photo is being displayed manually Press to exit a setup screen AUTOPLAY or go back to the previous screen AUTOPLAY Press to display photos one by one at a preset interval NOTE When this function is running all other buttons will not function except ESC Press to zoom in
Download Pdf Manuals
Related Search