FUNAI LC200EM8 Flat Panel Television User Manual
Contents
1. 27 Other Specifications i k 27 Limited Warranty Back cover 2007 Funai Electric Co Ltd All rights reserved No part of this manual may be reproduced copied transmitted disseminated transcribed downloaded or stored in any storage medium in any form or for any purpose without the express prior written consent of Funai Furthermore any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited Information in this document is subject to change without notice Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes FUNAI with the 7 design is a registered trademark of Funai Electric Co Ltd and may not be used in any way without the express written consent of Funai All other trademarks used herein remain the exclusive property of their respective owners Nothing contained in this manual should be construed as granting by implication or otherwise any license or right to use any of the trademarks displayed herein Misuse of any trademarks or any other content in this manual is strictly prohibited Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law EN Mi Remote Control Function POWER button p11 10 RETURN G button Press to turn the unit on and off Press to ret2. 4 e Program Information Display DTV only E 5 You can display the title contents and other information Remote Control Function ccsccsseseseeeeseseceeeeseeuseesess 6 of the current DTV program on the TV screen Installing the Batteries 6 e Auto Channel Scan Control Panel 7 This unit automatically scans and memorizes channels chase tse E 7 available in your area eliminating difficult setup CONNECTION pror cautes Basic Connection 8 e V chip External Device Connection 9 This feature allows you to block children s access to inappropriate programs INITIAL SETTING e Closed Caption Decoder EEE T E 11 Built in closed caption decoder displays text for closed Main Menu 11 caption supported programming Auto Channel Scan 12 MTS SAP Tuner Language Selection 12 Audio can be selected from the remote control WATCHING TV e Auto Shut Off Function Channel Selection r 13 If there is no signal input from the antenna terminal and Volume Adjustment sccccesccesccceseceescceeseeueeeenecs 13 no operati
3. program The videotape may be illegally copied or the caption signal might not have been No caption is displayed read during copying when playing the videotape containing captions Black box is displayed in the e The text mode is selected for caption Select CAPTION 1 CAPTION2 or OFF TV screen Note The LCD panel is manufactured to provide many years of useful life Occasionally a few non active pixels may appear as a fixed point of blue green or red This is not to be considered a defect in the LCD screen e Some functions are not available in specific modes but this is not a malfunction Read the description in this owner s manual for more details on correct operations lV Maintenance Cabinet Cleaning e Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry e Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces Panel Cleaning Wipe the panel of the unit with a soft cloth Before cleaning the panel disconnect the power cord IR Signal Check If the remote control is not working properly you can use an AM radio or digital camera including a cellular phone with built in camera to see if it is sending out an infrared signal A e With an AM radio Tune the AM radio station to a non broadcasting fre
4. ENTER e g digital TV mode TVSETUP gt PICTURE CHANNEL SETUP V CHIP SETUP LANGUAGE ENGLISH CAPTION OFF BACK LIGHT COLOR TEMP DTVCC BRIGHT NORMAL 3 Use Cursor to select the picture quality type you want to adjust BRIGHTNESS a CONTRAST or COLOR Ly TINT SHARPNESS Use Cursor lt p gt to adjust the quality QD or B cursor Cursor BRIGHTNESS to decrease brightness COLOR to brighten color SHARPNESS tomakesot romake Press SETUP to exit SETUP A Note The picture adjustment setting display will automatically disappear in a few seconds 18 EN M Closed Caption You can view closed captioning cc for TV programs movies and news Closed caption refer to text of dialogue or descriptions displayed on screen for the hearing impaired T Press SETUP to display the main menu SETUP 2 Use Cursor A V to select CAPTION then press ENTER repeatedly to change the setting e g digital TV mode TVSETUP PICTURE CHANNEL SETUP SETUP LANGUAGE ENGLISH A gt CAPTION OFF BACK LIGHT BRIGHT vw COLOR TEMP or DTVCC OFF CAPTION1 lt gt CAPTION2 TEXT1 TEXT2 Caption Mode CAPTION1 and TEXT1 are the primary caption and text services The captioning or text is displayed in the same language as the program s dialogue up to 4 lines of script on the TV screen where it does not
5. high definition TV CH4 19 00 No signal 19 30 CH4 2 may CH4 2 20 00 CH4 1 20 30 L I major channel minor channel gt change automatically gt change manually by using CH A V Although you cannot watch the high definition TV HDTV program the unit converts the HDTV signal down to the standard definition TV signal Note NO SIGNAL will appear on the TV screen after the minor 13 channel broadcast is over EN W M Switching Each Mode You can easily switch with the remote control to the DTV ATSC and TV NTSC or to access an external device when they are connected to the unit 14 EN Press INPUT repeatedly to cycle through the input mode ANALOG MODE pi DIGITAL MODE Ne VIDEO1 VIDEO2 use the video or S video input jack on the unit select VIDEO1 use the component video input jack on the unit select VIDEO2 Note e When you switch the analog mode to the digital mode it may take a while until the digital channel selection is completed The following TV screen is displayed while switching the mode NOW SCANNING M Switching Audio Mode This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode While receiving an MTS broadcast press AUDIO gt repeatedly to cycle through the available audio channel MAIN AUDIO lt sai MONO MAIN Outputs main audio SAP
6. Color Temperature on page 21 digital channel will be displayed e DTVCC Note In addition to the basic closed caption described Ifyou connect the cable system directly contact the CATV on page 18 DTV has its own closed caption called installer DTVCC If you press POWER or SETUP during auto channel scan the setting will be canceled e When no channel can be received by auto channel scan NO TV SIGNALS will be displayed on the TV screen Refer to DTV Closed Caption on page 19 Iv Auto Channel Scan e Channel settings will be saved even if the power fails If you switch wires e g between antenna and CATV or if you move the e If you have Spanish or French menus and need English unit to a different area after the initial setting or if you restore the DTV press SETUP Use Cursor A V to select IDIOMA channel you deleted you will need to perform auto channel scan or LANGAGE Press ENTER to select ENGLISH Press SETUP to remove the main menu Before you begin With regard only to the digital channel even after the Make sure if the unit is connected to antenna or cable scanning is complete if you unplug the AC power cord _ KhK before turning off the unit by pressing POWER the T Press SETUP to display the main menu channel setting may be lost SETUP v Language Selection 2 Use Cursor A V to select CHANNEL SETUP then You c
7. SCREEN MODE amp button p16 Press to select aspect ratio available for the TV screen CH RETURN amp button p13 Press to return to previous channel M Installing the Batteries Install the batteries AA x 2 matching the polarity indicated inside battery compartment of the remote control Battery Precautions Be sure to follow the correct polarity as indicated in the battery compartment Reversed batteries may cause damage to the device Do not mix different types of batteries together e g Alkaline and Carbon Zinc or old batteries with fresh ones If the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage Do not try to recharge batteries they can overheat and rupture EN M Control Panel j SETUP V VOLUME A CHANNEL A INPUT POWER top of the unit N v Rear Panel H lo gt fp ff COT rear of this unit VIDEO 2 r COMPONENT Pb L VIDEO 1 AUDIO COAXIAL S VIDEO VIDEO L R i fe J O l fe z SETUP button p12 Press to display the main menu VOLUME V buttons p13 Press to adjust the volume or move right A left V through the main menu items CHANNEL 4 Y buttons p13 Press to select channels or move up down through the main menu items INPUT button p15 e Press to ac
8. 14 69 CATV 2 13 A W W 1 W 94 analog W 1 W 84 A 5 A 1 5A Tuning system Channel frequency synthesized tuning system Channel access Direct access keyboard Programmable scan and up down M Electrical Specification Sound output 1W 80x2 e Designs and specifications are subject to change without notice and without our legal obligation e If there is a discrepancy between languages the default language will be English M Other Specifications Terminals Antenna input VHF UHF CATV 750 unbalanced F type S video input Mini DIN 4 pin jack x 1 Y 1Vp p 750 C 286mVp p 750 1Vp p 750 2V rms Video input RCAjackx1 Audio input RCA jack x 4 Component video input RCA jack x 3 Y 1Vp p 750 Pb 700mVp p 750 Pr 700mVp p 750 Coaxial digital audio output RCA jack x1 500mVp p 750 Headphone s inches 3 5mm Remote control Digital encoded infrared light system Operating temperature 41 F 5 C to 104 F 40 C Power requirements 120V AC 10 60Hz 0 5 Power consumption maximum 60W LCD 20 inches VGA panel Dimensions W 23 4 inches 594mm H 17 9 inches 454mm D 8 1 inches 204mm Weight 11 7 Ibs 5 3kg 27 EN gemerson LIMITED WARRANTY FUNAI CORP will repair this product free of charge in the USA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year f
9. CHIP SETUP B B MPAA Rating gt page 23 gt TV RATING A MPAA RATING B wall DOWNLOADABLE RATING C C Change Password CHANGE PASSWORD r gt page 24 Note e DOWNLOADABLE RATING will be available when the unit receives a digital broadcast using the new rating system When you select a rating and set it to BLOCK the higher ratings will be blocked automatically The lower ratings will be available for viewing e When you set the highest rating to VIEW all ratings turn to VIEW automatically If the PROTECTED PROGRAM message appears during your TV viewing change to a channel that is not blocked Then you can access V CHIP SETUP menu and change the setting to allow all TV viewing block any inappropriate programming set your limits in both TV RATING and MPAA RATING The V chip setting will be retained after a power failure except the access code reverts to 0000 22 EN IN t t Use Cursor A V to select TV RATING then press ENTER e g digital TV mode A Na 4 V CHIP SETUP or gt TV RATING MPAA RATING v DOWNLOADABLE RATING N CHANGE PASSWORD v Ness Use Cursor A V to select the desired rating then press ENTER repeatedly to switch between VIEW and BLOCK gt VIEW MEW VIEW MEW MEW MEW nu goy Appropriate for all children lower TV Y7 Appropriate for
10. Outputs second audio program MONO Outputs mono audio The information display will automatically disappear in a few seconds DTV T Press AUDIO gt to display the currently selected language and the number of available languages AUDIO 2 Press AUDIO gt repeatedly to cycle through the available audio languages AUDIO C e Available languages differ depending on the broadcast OTHER is displayed when the audio language cannot be acquired or the acquired languages are other than English Spanish or French The information display will automatically disappear in a few seconds Note Pressing AUDIO 2 does not control external audio device Mi Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen In the analog mode the current channel number is displayed Press DISPLAY 1 CH 25 DISPLAY The current channel number is displayed at the top right corner of the TV screen clear the display press DISPLAY i again DTV In the digital mode the detailed broadcasting information for the current channel such as program title program guides are displayed Press DISPLAY i repeatedly to cycle through the available display modes OFF DISPLAY D BROADCASTING INFORMATION PROGRAM GUIDE Broadcasting Information The following information is displayed 1 channel number 2 bro
11. Pb Pr i R VIDEO 1 r AUDIO q COAXIAL S VIDEO VIDEO L R DIGITAL AUDIO COAXIAL IN digital audio coaxial cable 10 EN These operations are accessible by remote control Some may also be accessible by controls on the main unit M Initial Setup This section will guide you through the unit s initial setting which includes selecting a language for your on screen menu and AUTO PRESET CH which automatically scans and memorizes viewable channels Before you begin Make sure if the unit is connected to antenna or cable T After making all the necessary connections press POWER to turn on the unit POWER e This operation may take a few moments 2 Use Cursor A V to select the on screen language from the choices on the right side of the TV screen ENGLISH ESPANOL FRANCAIS gt SELECT LANGUAGE ENGLISH SELECCIONE EL IDIOMA ESPA OL CHOISIR LA LANGUE FRANCAIS SELECT A Y SET ENTER SELECCIONE 4 AJUSTE ENTER CHOIX A VALIDER ENTER Note e Ifyou connect the cable system directly contact the CATV installer Ifyou press POWER or SETUP during AUTO PRESET CH this setting will be canceled The initial auto channel scan function can be executed for either TV DTV or CATV only once If you want to scan both TV DTV and CATV you need to select CHANNEL SETUP in the main menu to scan and memorize other channels after initial presetting is completed Refer t
12. select the non memorized channels use the Number buttons or LS To Use the Number buttons a Me When selecting analog channel 12 e The volume bar will be displayed at the bottom of the Nin ACT TV screen when adjusting the volume e The volume bar display will automatically disappear in a few seconds When selecting digital channel 12 1 Be sure to press ENT before entering the minor Press MUTE to turn off and on the sound channel number ENT gt 4 OP gt PDP VIP oy Press CH RETURN to return to the previously a viewed channel lt e When you select a channel larger than 100 press 100 first Th the Number butt t ah PERE ee n onion j MUTE is displayed on the TV screen for a few seconds About digital TV broadcasting With its high definition broadcast digital broadcasting Press MUTE again or VOL A V to recover the far surpasses analog broadcasting in both its picture original volume and sound quality What is the minor channel By using high compression technology digital broadcasting offers a service that enables multiple signals to send simultaneously Therefore you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network NTSC analog mode Air Time ATSC digital mode 18 00 No signal 18 30 CH4
13. then e ADD DELETE DTV or ADD DELETE menu will disappear press ENTER automatically in a few seconds e g digital TV mode In the digital mode DTV you can add or delete channels only for major channel A TVSETUP e Once you delete a DTV channel you cannot recover the or channel without performing auto channel scan again V CHIP SETUP Refer to Auto Channel Scan on page 12 v LANGUAGE ENGLISH Cy CAPTION OFF w BACK LIGHT BRIGHT COLOR TEMP NORMAL ENTER DTVCC vw 3 Use Cursor A V to select ADD DELETE DTV or then press ENTER e g digital TV mode CHANNEL SETUP gt ADD DELETE DTV AUTO PRESET CH DTV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min ZL Select the channel you want to add or delete Refer to Channel Selection on page 13 e g digital TV mode ADD DELETE DTV Use Cursor lt p gt to select ADD or DELETE D or add or delete another channels repeat steps 4 5 e Color of channel number displayed at the right top of the TV screen indicates Blue The selected channel will be added Red The selected channel will be deleted EN 17 O lV Picture Adjustment You can adjust brightness contrast color tint and sharpness T Press SETUP to display the main menu SETUP 2 Use Cursor A V to select PICTURE then press
14. 2ch or multi channel audio EDTV enhanced definition TV Enhanced digital format that takes 480 line progressive signal HDTV high definition TV Ultimate digital format that produces high resolution and high picture quality NTSC Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards Password A stored 4 digit number that allows access to parental control features SAP secondary audio program Second audio channel delivered separately from main audio channel This audio channel is used as an alternate in bilingual broadcasting SDTV standard definition TV Standard digital format that is similar to the NTSC picture quality S video Offers higher quality images by delivering each signal color c and luminance y independently of each other through several signal formats including Y Pb Pr and Y Cb Cr Mi Cable Channel Designations separate cables If you subscribe to cable TV the channels are displayed as 1 135 Cable companies often designate channels with letters or letter number combinations Please check with your local cable company The following is a chart of common cable channel designations CATV channel TV Display v General Specifications TV format ATSC NTSC M TV standard Closed caption system 15 122 FCC digital CC 15 119 FCC analog CC Channel coverage ATSC NTSC Terrestrial VHF 2 12 UHF
15. ARK 3 Press SETUP to exit SETUP vi Color Temperature You can adjust color temperature of the TV screen T Press SETUP to display the main menu SETUP lt 2 Use Cursor A V to select COLOR TEMP then press ENTER repeatedly to change the setting e g digital TV mode TVSETUP PICTURE CHANNEL SETUP V CHIP SETUP a LANGUAGE ENGLISH CAPTION OFF or BACK LIGHT BRIGHT gt COLOR TEMP NORMAL Cy DTVCC NORMAL WARM COOL 3 Press SETUP to exit SETUP EN 21 O M V chi V chip reads the ratings for programs then denies access to the programs which exceed the rating level you set With this function you can block certain programming inappropriate for children T Press SETUP to display the main menu SETUP 2 Use Cursor A V to select V CHIP SETUP then press ENTER e g digital TV mode A TVSETUP PICTURE Or CHANNEL SETUP gt V CHIP SETUP v LANGUAGE ENGLISH OFF BACK LIGHT BRIGHT COLOR TEMP NORMAL DTV CC Ra wt 3 Use the Number buttons to enter the 4 digit numbers for your password CP PASSWORD 9 P e When you have not set up your password enter 0000 e When the password is correct the following V CHIP SETUP menu is displayed See the following description for setting each item e g digital TV mode Rating page 22 V
16. Emerson EMERSON AND THE G CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP PARSIPPANY NEW JERSEY U S A NOILONGOULNI 20 Digital Analog LCD TV Owner s Manual LC200EM8G LC200EM8 NOILOANNOO Z a gt O AL SNIHOLVA ENHANCED DEFINITION TELEVISION D IpoLBv DIGITAL TO RECEIVE DIGITAL ANALOG SIGNAL YOU MUST CONNECT ANTENNA IFYOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER S MANUAL PLEASE CALL TOLL FREE 1 800 256 2487 OR VISIT OUR WEB SITE AT http www EmersonAudioVideo com 2007 Funai Electric Co Ltd WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The important note is located on the rear of the cabinet Important Safeguards N w ul 9 READ INSTRUCTIONS All the safety and operating instructions should be read before the appliance is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warninos on the appliance and in the operating instructions should be adhered to 4 FOLLOW INSTRUCTIONS All operating and use instructions should be follo
17. M Enlarge and display the center area of the digital supported program The right and left side of image will be cut off Note e You may not switch the display mode depending on the program 16 EN lV Sleep Timer The sleep timer can be set to automatically turn off the unit after an incremental period of time T Press SLEEP to set the sleep timer SLEEP WY SLEEP OFF Sleep timer display appears on the TV screen time until shut off SLEEP WY SLEEP 120MIN e You can set your unit to turn off after a set period of time from 30 to 120 minutes Each press of SLEEP will increase the time by 30 minutes After set up the sleep timer display can be called up for checking by pressing SLEEP To Cancel the Sleep Timer Press SLEEP repeatedly until SLEEP OFF is displayed on the TV screen Note The sleep timer setting display will automatically disappear in a few seconds e When you disconnect the unit from the AC outlet or when a power failure occurs the sleep timer setting will be canceled O vi Channel Add Delete The channel add delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting You can also delete the unnecessary channels T Press SETUP to display the main menu Press SETUP to exit SETUP SETUP LL Note 2 Use Cursor A V to select CHANNEL SETUP
18. P to exit SETUP Note e CAPTION SERVICE that you can switch differs depending on the broadcast description 19 EN O v DT VCC Style DTV You can change the style of DTV CC such as font color or size etc T Press SETUP to display the main menu SETUP 2 Use Cursor A V to select DTVCC then press ENTER e g digital TV mode TVSETUP PICTURE or CHANNEL SETUP V CHIP SETUP LANGUAGE ENGLISH OFF BACK LIGHT BRIGHT M COLOR TEMP NORMAL gt DTVCC 3 Use Cursor A V to select USER SETTING then press ENTER repeatedly to set to ON Items in the dotted box are available only when USER SETTING is ON Ne DIVCC or CAPTION SERVICE SERVICE1 6 gt USER SETTING CAPTION SIZE MIDDLE N 4 FONT STYLE STYLE1 8 CHARACTER EDGE NONE FORE OPACITY SOLID FORE COLOR WHITE BACK OPACITY SOLID BACK COLOR BLACK Use Cursor A V to select an item then press ENTER repeatedly to change the setting for the item 4 DTVCC or CAPTION SERVICE SERVICE1 6 USER SETTING ON gt CAPTIONSIZE MIDDLE 6 4 FONT STYLE STYLE1 8 CHARACTER EDGE NONE w FORE OPACITY SOLID FORECOLOR WHITE ENTER BACK OPACITY SOLID BACK COLOR BLACK SS 20 EN e CAPTION SIZE Closed captioning font size can be changed as below e FONT STYLE Font style of the dis
19. PLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORIZED SERVICE CENTER THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT IF NO PROOF OF PURCHASE IS ATTACHED THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI CORP ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS To obtain warranty service you must take the product or deliver the product freight prepaid in either its original packaging or p
20. RICAL CODE LEAD IN WIRE GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT lt GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS NEC NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H 14 LIGHTNING For added protection for this TV receiver during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the TV due to lightning and power line surges 15 POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 16 OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 17 OBJECT AND LIQUID ENTRY Never push objects of any kind into 20 REPLACEMENT PARTS When replacement parts are required be i O J O l z this TV through openings as they may touch dangerous voltage sure the service technician uses replacement parts specified by points or short out parts that could result in a fire or elect
21. TENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE 11 GROUNDING OR POLARIZATION This TV is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Fig A FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT
22. V then press ENTER repeatedly to change the setting VIEW VIEW VIEW BLOCK BLOCK BLOCK Cram Cuy G General audience PG Parental guidance suggested Unsuitable for children under 13 Restricted under 17 requires accompanying parent or adult guardian NC 17 No one under 17 admitted x Mature audience only Press SETUP to exit SETUP 23 EN O e e range EAN e Although the default code 0000 is supplied with the unit you can set your own password Use Cursor A V to select CHANGE PASSWORD then press ENTER e g digital TV mode Ne Z V CHIP SETUP TV RATING or MPAA RATING DOWNLOADABLE RATING Cv gt CHANGE PASSWORD 5 Press the Number buttons on the remote control to enter the new 4 digit password e Enter password again in CONFIRM PASSWORD space x NEW PASSWORD OD 9 pees CONFIRM PASSWORD ee Press SETUP to exit SETUP Nd Note e Make sure new password and confirm password must be exactly the same If they are different the space is cleared for reentering e Your password will be erased and return to the default 0000 when a power failure occurs If you forget the password unplug the power cord for 10 seconds to restore the password to 0000 24 EN T M Troubleshooting Guide If the unit does not perform properly when operated as instructed in this owner s manual check the
23. ackaging affording an equal degree of protection to any AUTHORIZED SERVICE CENTER FUNAI CORP will not reimburse you for any service done by unauthorized service providers without prior written approval To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries please contact us at FUNAI CORPORATION Customer Service Tel 1 800 256 2487 http www EmersonAudioVideo com 19900 Van Ness Avenue Torrance CA 90501 Printed in China A714AUH A7149UH 1EMN22283
24. adcast station 3 program title 4 audio language Refer to Switching Audio Mode on page 14 S ae J 2 le mani A Day of Memories 3 Watapika Program Guide e The program guide added to broadcasting information is displayed KABC CH 95 03 A Day of Memories ENGLISH 1 3 A quarter century ago which may now qualify as the good old days of newsp progam apering run of paper sales accounted guide for 80 percent of the industry s adverti sing revenues Next Push Y Ei Back Push N Note e When the program guide consists of more than 6 lines use Cursor A F to scroll No description provided is displayed when the program guide is not provided e While the program guide is displayed the closed caption function is interrupted In external input mode the following screen is displayed e g When an external device is connected to VIDEO1 input jack VIDEO 1 The information display will automatically disappear in a few seconds when the closed caption is on 15 EN W IVI TV Screen Display Mode DTV 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16 9 video signal Press SCREEN MODE repeatedly to switch the TV aspect ratio SCREEN MODE LETTERBOX ZOOM LETTERBOX Display the digital supported program in full screen Black borders will spread in the upper and lower screen ZOO
25. all children 7 and older TV PG Parental guidance suggested TV 14 Unsuitable for children under 14 TV MA Mature audience only higher To Set the Sub Ratings As for TV Y7 TV PG TV 14 or TV MA you can further set the sub ratings to block specific elements of programming To set the sub ratings follow the steps below T Use Cursor A V to select the desired main rating then press ENTER twice to show its sub ratings gt VIEW VIEW TV Y7 TV G VIEW TV PG DLSV BLOCK TV 14 DLSV BLOCK TV MA LSV BLOCK TARG 2 Use Cursor then press ENTER repeatedly to change the setting e g TV PG BLOCK BLOCK BLOCK BLOCK BLOCK ESEG Fantasy Violence ww 5 Coarse Language ASAU TV PG TV 14 Suggestive Dialogue 6 Press SETUP to exit Blocked sub ratings will appear beside the main rating category in TV RATING menu e You cannot block a sub rating D L 5 or V if the main rating is set to VIEW Changing the category to BLOCK or VIEW automatically changes all its sub ratings to the same BLOCK or VIEW MPAA Rating is the rating system created by MPAA Motion Picture Association of America Use Cursor A V to select MPAA RATING then press ENTER e g digital TV mode V CHIP SETUP TV RATING gt MPAA RATING DOWNLOADABLE RATING CHANGE PASSWORD Use Cursor A
26. an choose English Spanish or French as your on screen language press ENTER e g digital TV mode 1 Press SETUP to display the main menu No 2 eee SETUP PICTURE OH BACK LIGHT BRIGHT a I een 2 Use Cursor A V to select LANGUAGE then press ENTER repeatedly to change the setting e g digital TV mode 3 Use Cursor A V to select your desired preset type ee then press ENTER PICTURE e g digital TV mode HP SETUP gt LANGUAGE ENGLISH CHANNEL SETUP Y T or ADD DELETE DTV COLOR TEMP NORMAL gt AUTO PRESET CH DTV DTVCC lt FUTO PRESET CHCA CATV takes approx 50min GLI SH ESPANOL e When aerial antenna is connected select FRAN AIS AUTO PRESET CH TV AUTO PRESET CH DTV or AUTO PRESET CH TV DTV e When connected to CATV select 3 Press SETUP to exit AUTO PRESET CH CATV TUE e Scanning and memorizing the channels automatically e g digital TV mode 12 AUTO PRESET CH DTV I EN W M Channel Selection M Volume Adjustment Select channels by pressing CH A V or the Number buttons This section describes how to adjust the volume The mute function which turns the sound off and on is also described select the memorized channels Use VOL V to adjust the audio volume use CH A V or the Number buttons
27. ble connection to the main unit e When the outside antenna is used check the wire condition and connection Adjust CONTRAST and BRIGHTNESS in the main menu e View other TV channels The problem might be limited to the broadcasting station Lines or streaks in picture e When the outside antenna is used check the wire condition and connection Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Picture blurred e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station Ghosts in picture e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Bars on TV screen e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality Picture rolls vertically e When the outside antenna is used check the wire condition and connection Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Different color mark
28. cess connected an external device like a DVD player or VCR e Press to switch between the digital mode DTV and analog mode POWER button p11 Press to turn the unit on and off Infrared Sensor Window Receives infrared rays transmitted from the remote control ANT jack p8 RF coaxial cable connection for your antenna or cable satellite box HEADPHONE jack Headphone connection for personal listening COMPONENT and AUDIO input jacks p9 Component video cable connection for an external device Use component video and audio output jacks of an external device AUDIO input jacks p9 RCA audio cable connection for an external device VIDEO input jack p10 RCA video cable connection for an external device S VIDEO input jack p9 S video cable connection for an external device COAXIAL digital audio output jack p10 Digital audio coaxial cable connection for a decoder or an audio receiver Use digital audio input jack of an external device AC power cord Connect to a standard AC outlet to supply power to this unit EN CONNECTION Cables not included Please purchase the necessary cables at your local store M Basic Connection This section describes how to connect the unit to an antenna cable satellite box etc Note Be sure your antenna or other device is connected properly before plugging in the power cord Antenna Cable Connection When connecting the unit to an antenna or cable TV compa
29. ction This is not a problem with the unit a The caption or text characters will not be displayed while ww the main menu or functions display is shown Ifa black box appears on the TV screen this means that 3 Use Cursor to select CAPTION SERVICE then the closed caption is set to the text mode To clear the box ENTER dl h h I select CAPTION 1 CAPTION 2 or OFF press repeatedly to change the setting If the unit receives poor quality television signals the 2 captions may contain errors or there might be no captions at all Some possible causes of poor quality signals are Automobile ignition noise Electric motor noise Wedk signal reception Multiplex signal reception ghosts or screen flutter The unit retains the closed caption setting if the power fails e When the unit receives a special effects playback signal l e Search Slow and Still from a VCR s video output channel CH3 or CH4 the unit may not display the correct caption or text DTVCC CAPTION SERVICE OFF USER SETTING OFF CAPTION SIZE MIDDLE FONT STYLE STYLE1 8 CHARACTER EDGE NONE FORE OPACITY SOLID FORE COLOR WHITE BACK OPACITY SOLID BACK COLOR BLACK Select if you do not want DTVCC This is the default Select one of these before CAPTION SERVICE changing any other item in SERVICE1 6 CAPTION menu Choose SERVICE1 6 under normal circumstances B lt Press SETU
30. d connecting methods differ depending on the cable satellite box For more information please contact your cable satellite provider EN Cables not included Please purchase the necessary cables at your local store lV External Device Connection Component Video Cable Connection Component video connection offers better picture quality for video devices connected to the unit Use a component video cable to connect the unit to external video devices equipped with component video output jacks If you connect to the unit s component video input jack connect RCA audio cables to the audio L R jacks of VIDEO2 e m O al z component video cable rear of this unit VIDEO 2 r COMPONENT l Pr VIDEO 1 S VIDEO _ VIDEO e g DVD player with the component video output jacks green blue red RCA audio cable Note This unit accepts 480i 480p simplified 1080i video signals e Simplified 1080 video signal differs to the original 1080i video signal because it is displayed after converted into 480p signal S video Cable Connection S video connection offers good picture quality for video devices connected to the unit Use an S video cable to connect the unit to external video devices equipped with S video output jack If you connect to the unit s S video input jack connect RCA audio cables to t
31. e unit on a carpet because this will block the ventilation holes e Install the unit in a horizontal position e Avoid locations subject to strong vibration e Do not place the unit near strong magnetic fields e Avoid moving the unit to locations where temperature differences are extreme e Be sure to unplug the AC power cord from the outlet before carrying the unit TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE Do not handle the power cord with wet hands Do not pull on the power cord when disconnecting it from an AC outlet Grasp it by the plug If by accident water is spilled on the unit unplug the power cord immediately and take the unit to our authorized service center for servicing Do not place anything directly on top of the unit The serial number of this product may be found on the back of the unit No others have the same serial number as yours You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft date of purchase dealer phone No serial No dealer purchase from model No dealer address Note about recycling This product s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes
32. equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical D0 DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D DIGITAL symbol are trademarks of Dolby Laboratories EN LOCATION For safe operation and satisfactory performance of the unit keep the following in mind when selecting a place for its installation e Shield it from direct sunlight and keep it away from sources of intense heat e Avoid dusty or humid places e Avoid places with insufficient ventilation for proper heat dissipation Do not block the ventilation holes at the top and bottom of the unit Do not place th
33. following chart once before calling for service Symptom Remedy No power sure the power cord is plugged in If a power failure occurs unplug the power cord for 30 minutes to allow the unit to reset itself No picture or sound e Check if the power is on e Check the outlet connection e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station e Turn off the power and wait for about 1 minute then turn it on again No color e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station Adjust the COLOR in the main menu Sound OK picture poor e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality Adjust CONTRAST and BRIGHTNESS in the main menu e View other TV channels The problem might be limited to the broadcasting station Picture distorted e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station Weak picture e Check the antenna or ca
34. he audio L R jacks of VIDEO1 rear of this unit VIDEO 2 COMPONENT V Pb Pr VIDEO 1 R AUDIO S pie COAXIAL S VIDEO VIDEO DVD player with the S video output jack S video cable RCA audio cable Note Ifyou connect to the S video jack and the video jack at the same time the S video connection will have priority EN C Cables not included Please purchase the necessary cables at your local store Video Connection Video connection offers standard picture quality for video devices connected to the unit If you connect to the unit s video input jack connect RCA audio cables to the audio L R jacks of VIDEO1 When the audio jack of the video device is monaural connect the RCA audio cable to the audio L input jack rear of this unit VIDEO 2 r COMPONENT F AUDIO4 Pb Pr L R VIDEO 1 AUDIO gt COAXIAL S VIDEO VIDEO L R 6 0 camcorder video game a VCR AUDIO OUT VIDEO L Rou gt RCA video cable RCA audio cable Note If you connect to the S video jack and the video jack at the same time the S video connection will have priority Digital Audio Output Connection for digital broadcasting only If you connect this unit to an external digital audio device you can enjoy multi channel audio like 5 1ch digital broadcasting sound rear of this unit VIDEO 2 r COMPONENT Y
35. in any way When the TV exhibits a distinct change in performance this indicates a need for service lV Precautions LAMP IN LCD CONTAINS MERCURY DISPOSE ACCORDING TO LOCAL STATE OR FEDERAL LAW CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the
36. lvl Supplied Accessories owner s manual remote control batteries 1EMN22283 NF601UD AA x 2 If you need to replace these accessories please refer to the part No with the illustrations and call our toll free customer support line found on the cover of this manual e Depending on your antenna system you may need different types of combiners mixers or separators splitters Contact your local electronics store for these items IVI Symbols Used in this Manual M Tilt Stand The following is the description for the symbols used You can adjust the stand to change the angle of the TV in this manual 2 5 to 10 ibti 2 55 105 Description refers to 25 i Digital TV operation Analog TV operation If neither symbol appears under the function heading operation is applicable to both i O J O l z M Features lvl Contents iu INTRODUCTION You can use your remote control to select channels which Important Safeguards 2 are broadcast in digital format and conventional analog PISCAUUONS 3 format Also cable subscribers can access their cable TV Supplied Accessories eer TT Te ETT eee 4 channels Symbols Used in this Manual 4
37. mpleted the lowest memorized channel in the broadcasting will be displayed Press SETUP e g digital TV mode TVSETUP gt PICTURE CHANNEL SETUP SETUP V CHIP SETUP LANGUAGE ENGLISH CAPTION OFF BACK LIGHT BRIGHT COLOR TEMP NORMAL DTVCC PICTURE You can adjust the picture quality Refer to Picture Adjustment on page 18 e CHANNEL SETUP You can automatically scan the viewable channels and remove those that are undesired Refer to Auto Channel Scan on page 12 e V CHIP SETUP You can set the viewing limitations Refer to V chip on page 22 e LANGUAGE You can change the language English Spanish French displayed on the main menu Refer to Language Selection on page 12 e CAPTION You can change the display format for closed caption which displays the dialogue of a TV program or other information across the TV screen Refer to Closed Caption on page 18 11 EN BACK LIGHT e When the scanning and memorizing are completed You can set the desired brightness mode the lowest memorized channel will be displayed Refer to Back Light Setting on page 21 e When you selected AUTO PRESET CH TV DTV the e COLOR TEMP lowest memorized analog channel will be displayed You can adjust color temperature NORMAL WARM when the scanning and memorizing are completed COOL If there is no analog channel the lowest memorized Refer to
38. ny without cable satellite box Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit e g VHF UHF antenna RF coaxial cable cable TV company Once connections are completed turn on the unit and begin initial setup Channel scanning is necessary for the unit to memorize all available channels in your area Refer to Initial Setup on page 11 Note For your safety and to avoid damage to device please unplug the RF coaxial cable from the antenna input jack before moving the unit If you use an antenna to receive analog TV it should also work for DTV reception Outdoor or attic antennas will be more effective than set top versions 7 easily switch your reception source between antenna and cable install an antenna selector e Ifyou connect to the cable system directly contact the CATV installer Connection to Cable Box or Satellite Box Connect the RF coaxial cable on your home outlet to the input jack of the cable satellite box Use another RF coaxial cable to connect the antenna input jack of the unit to the output jack of the cable satellite box e g satellite dish cable satellite box LZ Or OUT nu _ l L cable TV RF coaxial cable RF coaxial cable company Required cables an
39. o page 12 e You can cancel or exit the initial AUTO PRESET CH menu by pressing SETUP e When no channel can be received by AUTO PRESET CH NO TV SIGNALS is displayed on the TV screen If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit HELPFUL HINTS appears Follow the instructions listed on the TV screen z gt O HELPFUL HINTS 1 PLEASE CHECK TO SEE IF THE ANTENNA CABLE SATELLITE IS PROPERLY CONNECTED 2 DID YOU PERFORM AUTO PRESET CH 3 PLEASE REFER TO FRONT PAGE OF THE OWNER S MANUAL OR REAR PANEL FOR SUPPORT LINE INFORMATION M Main Menu This section describes the overview of the main menu displayed when you press SETUP For more details see the reference page for each item The main menu consists of the function setting items below e INITIAL SETUP menu on step 3 will be displayed in the selected language after you press ENTER 3 Use Cursor A F to select AUTO PRESET CH TV DTV for TV channels or AUTO PRESET CH CATV for CATV channels then press ENTER INITIAL SETUP PLEASE CONNECT ANTENNA OR CABLE OR SATELLITE TO THIS UNIT gt AUTO PRESET CH TV DTV AUTO PRESET CH CATV e Scanning and memorizing the channels automatically Start AUTO PRESET CH TV DTV e When the scanning and memorizing are co
40. obstruct relevant parts of the picture CAPTION2 and TEXT2 are rarely available and broadcasters use them only in special conditions such as when CAPTION1 or TEXT1 is not available There are 3 display modes according to programs Paint on mode Displays input characters on the TV screen immediately Once characters are stored in memory they are displayed all at once Displays the characters continuously by scrolling max 4 lines Pop on mode Roll up mode Mi DTV Closed Caption In addition to the basic closed caption described on page 18 DTV has its own closed caption called DTVCC Use this menu to change the settings for DTVCC 3 Press SETUP to exit T Press SETUP to display the main menu SETUP SETUP Note show the closed caption on your TV screen broadcast 2 Use Cursor A V to select DTVCC then press signal must contain the closed caption data ENTER Not all TV programs and commercials have the closed caption or all types of the closed caption e g digital TV mode Captions and texts may not match the TV voice exactly 4 e Changing channels may delay the closed caption for a few PICTURE seconds or CHANNEL SETUP Adjusting or muting the volume may delay the closed eae ENGLISH caption for a few seconds N 4 CAPTION OFF Abbreviations symbols and other grammatical shortcuts as A may be used in order to keep pace with the on screen gt DTVCC a
41. on for 15 minutes the unit will turn itself off Switching Each Mode 14 automatically lode sig i creen Information ded mney TV Screen Display Mode 16 This feature will automatically turned off the power of the Sleep 16 unit at a specific time e Choices for On screen Language OPTIONAL SETTING Select your on screen language Channel Add Delete 17 English Spanish or French Picture AdJuSIWent uu sesasukaqapakasaaa 18 Stereo Sound Function 18 Frequency Synthesized Tuning aN E Provides free and easy channel selection and letsyoutune Bagelightseiting m directly to any channel using the channel number buttons Color Temperature cccccececececesececuceceseeeeeeeesecuees 21 on the remote control T E 22 e Component Video Input TROUBLESHOOTING e S video Input Input Troubleshooting Guide ssesseseseeeeeeeeeeeeeeeeeneeenes 25 Digital Audio Coaxial Output Maleae uuu AEE 26 27 Cable Channel Designations 27 General 27 Electrical Specification
42. on to the main unit e Check the batteries of the remote control e Check if there is an obstacle between the infrared sensor window and the remote control e Test the signal output If OK then possible infrared sensor trouble Refer to IR Signal Check on page 26 Aim the remote control directly at the infrared sensor window on the front of the unit e Reduce the distance to the unit e Re insert the batteries with their polarities signs as indicated Problems with Closed Caption Feature Remote control does not work Misspelled captions are displayed Captions are not entirely displayed or captions are delayed behind the dialogue Captions are displayed as a white box No caption is displayed in the closed caption supported e Closed captioning production companies may broadcast programs without correcting the misspelling in a live broadcast e Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts Most captioning production companies can display a dialogue to a maximum of 220 words per minute If a dialogue exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialogue Interference from buildings or weather conditions may cause captioning to be incomplete Broadcasting station may shorten the program to insert advertisement The closed caption decoder cannot read the information of the shortened program
43. played caption can be switched as below e CHARACTER EDGE Edge type of the displayed caption can be switched as below e FORE COLOR BACK COLOR Font and background color of the displayed caption can be switched as below e FORE OPACITY BACK OPACITY Text and background opacity of the displayed caption can be switched as below CAPTION SIZE MIDDLE LARGE SMALL STYLE1 8 Proportional font used in the menu screen STYLE2 8 Monospaced with serifs STYLE3 8 Proportionally spaced with serifs FONT STYLE STYLE4 8 Monospaced with serifs STYLES 8 Proportionally spaced without serifs STYLE6 8 Casual font type STYLE7 8 Cursive font type STYLE8 8 Small capitals NONE RAISED DEPRESSED UNIFORM SHARAT IERT eee SHADOW LEFT SHADOW RIGHT FORE OPACITY SOLID TRANSLUCENT FLASH WHITE BLACK RED GREEN YELLOW PONT TOTOR BLUE MAGENTA CYAN TRANSPARENT BACK OPACITY SOLID TRANSLUCENT FLASH BLACK RED GREEN BLUE YELLOW BASE COTON MAGENTA CYAN TRANSPARENT WHITE 5 Press SETUP to exit SETUP Mi Back Light Settin You can set the desired brightness mode T Press SETUP to display the main menu SETUP 2 Use Cursor A V to select BACK LIGHT then press ENTER repeatedly to change the setting e g digital TV mode TVSETUP PICTURE CHANNEL SETUP V CHIP SETUP a LANGUAGE ENGLISH CAPTION OFF or gt BACK LIGHT BRIGHT COLOR TEMP NORMAL z DTVCC v ENTER BRIGHT E NORMAL D
44. quency Point the remote control towards it p push any button and listen If the sound from the radio flutters it is receiving the remote control s infrared signal e With a digital camera including built in cell phone cameras Point a digital camera towards the remote control Push any button on the remote control and look through the digital camera If the infrared light appears through the camera the remote control is working Should your unit become inoperative do not try to correct the problem yourself There are no user serviceable parts inside Turn off the unit unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center 26 EN lv Glossary ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards Aspect Ratio The width of a TV screen relative to its height Conventional TVs are 4 3 in other words the TV screen is almost square widescreen models are 16 9 the TV screen is almost twice as wide as its height Component Video This is a video signal format that conveys each of 3 principal colors of light red blue and green through different signal lines This allows the viewers to experience picture colors as original as it is There are Dolby Digital The system developed by Dolby Laboratories to compress digital sound It offers stereo sound
45. ric shock the manufacturer that have the same characteristics as the original Never spill liquid of any kind on the TV part Unauthorized substitutions may result in fire electric shock 18 SERVICING Do not attempt to service this TV yourself as opening injury to persons or other hazards or removing covers may expose you to dangerous voltage or other 21 SAFETY CHECK Upon completion of any service or repairs to this hazards Refer all servicing to qualified service personnel TV ask the service technician to perform routine safety checks to 19 DAMAGE REQUIRING SERVICE Unplug this TV from the wall determine that the TV is in proper operating condition outlet and refer servicing to qualified service personnel under the 22 HEAT This TV product should be situated away from heat sources following conditions such as radiators heat registers stoves or other products including a When the power supply cord or plug is damaged or frayed amplifiers that produce heat b If liquid has been spilled or objects have fallen into the TV c If the TV has been exposed to rain or water d If the TV does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation Ifthe TV has been dropped or damaged
46. rom the date of original retail purchase Certain parts and LCD image burn in are excluded from this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unauthorized service center This limited warranty does not apply to any product not purchased and used in the United States This warranty only covers failures due to defects in material or workmanship which occur during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or products not supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COM
47. s on TV e Move the unit away from nearby electric appliances Turn off the power and wait screen 30 minutes before turning it back on e View other TV channels The problem might be limited to the broadcasting station Poor reception on some e Check the antenna or cable connection to the main unit channels When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Picture OK sound poor View other TV channels The problem might be limited to the broadcasting station No reception of digital signals e Make sure auto channel scan has been completed Refer to Auto Channel Scan on page 12 Auto channel scan must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast The selected channel may not be broadcasting When auto channel scan is interrupted and not completed some channels will not be received Make sure to complete Refer to Auto Channel Scan on page 12 25 EN Symptom Remedy The entered channel number Many digital channels have alternate channel numbers The unit changes the changes automatically numbers automatically to the ones signifying the broadcasting stations These are the numbers used for analog broadcasts e Check the antenna or cable connecti
48. t tre plac que sur un meuble avec ou sans roulettes recommand par le fabricant Si vous installez sur un meuble a roulettes d placez les deux ensembles avec pr caution Un arr t brusque l utilisation d une force excessive et des surfaces irr guli res risquent de d stabiliser l ensemble et de le renverser SS VENTILATION Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the TV on a bed sofa rug or other similar surface This TV should never be placed near or over a radiator or heat register This TV should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 0 POWER SOURCES This TV should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For TVs intended to operate from battery power or other sources refer to the operating instructions EN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAIN
49. urn to previous menu 1 i MUTE x lt button p13 operation Se Gk Agia Press to turn the sound on and off 11 INPUT button p14 2 i 12 SLEEP button p16 e Press to access connected an 3 13 Press to activate the sleep timer external device like a DVD player Number buttons p13 or VCR 14 e Press to select channels e Press to switch between the ENT button digital mode DTV and analog RETURN Ss e Press to shift the minor channel mode e 15 from the major channel 12 DISPLAY i button p15 5 100 button Digital Mode DTV 6 e Press to select 100 or higher e Press to display the channel channels CATV information signal type and TV e Press to search if there are minor setting channels on the currently selected Analog Mode TV major channel DTV Press to display the channel CH A V buttons p13 number signal type and TV iD Press to select channels and the setting external input mode External Input Mode VOL A V buttons p13 e Press to display the external Press to adjust the volume input mode signal type and TV ENTER button p11 setting Press to decide the command of 13 AUDIO gt button p14 setting when the main menu is Digital Mode DTV displayed e Press to select the audio SETUP button p11 language Press to display the main menu Analog Mode TV lt gt A Y buttons p11 e Press to select the audio mode Press to move left right up down through the items 14 15
50. wed CLEANING Unplug TV from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning EXCEPTION A product that is meant for uninterrupted service and that for some speciflc reason such as the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged by the user for cleaning or any other purpose may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5 ATTACHMENT S Do not use attachments not recommended by the TV manufacturer as they may cause hazards WATER AND MOISTURE Do not use this TV near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like ACCESSORIES Do not place this TV on an unstable cart stand tripod bracket or table The TV may fall causing serious injury to someone and serious damage to the appliance Use only with a cart stand G tripod bracket or table recommended by the manufacturer or sold with the TV A Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn AMEUBLES Cet appareil ne doi
Download Pdf Manuals
Related Search