Frigidaire 316135924 Range User Manual
Contents
1. OWNER S GUIDE Porcelain Enamel or Continuous Cleaning Oven Interior READ AND SAVE THESE INSTRUCTIONS Contents Product Registration Version en espanol Version francaise IMPORTANT SAFETY INSTRUCTIONS Grounding Instructions Surface Unit Flame Size Proper Surface Burner Adjustments Setting Surface Controls Before Setting Oven Controls Setting Clock and Minute Timer Setting Oven Controls Oven Cleaning General Cleaning Changing Cooktop and or Oven Lights Avoid Service Checklist GAS RANGE This Owner s Guide contains general operating instructions for your range and feature information for several models Your range will not have all the described features 316135924 0101 Product Registration Register Your Product The self addressed PRODUCT REGISTRATION CARD should be filled in completely signed and returned to Frigidaire Home Products Version en espanol Si desea obtener una copia en espanol de este Manual del Usuario sirvase escribir a la direcci n que se incluye a continuaci n Solicite la P N316080289 Version fran aise Si vous d sirez obtenir un exemplaire de la version fran aise de ce Guide de l utilisateur faites en la demande par crit l adresse indiqu e ci dessous Exigez qu on vous livre le N de pi ce 316080346 French Owner s Guides OR Spanish Owner s Guides please specify Frigidaire Home Products P O Box 360797 Strongsville2. OH 44136 This Owner s Guide contains general operating instructions for your range and feature information for several models Your range may not have all the described features The graphics shown are representational The graphics on your range may not look exactly like those shown Note The instructions appearing in this Owner s Guide are not meant to cover every possible condition and situation that may occur Common sense and caution must be practiced when installing operating and maintaining any appliance 2000 White Consolidated Industries All rights reserved Thank you for choosing your new range The information contained within this Owner s Guide will instruct you on how to properly operate and care for your range Please read through the information contained in your literature pack to learn more about your new range Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers The numbers are found on the serial plate located under the lift up cooktop for models equipped with venturi surface burners Serial plate located under the cooktop Model Number Serial Number Date of Purchase If the information in this manual is not followed exactly a fire or explosion may result causing property damage personal injury or death FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
3. Adjust leveling legs at base of range until the rack is level When range is level cooktop may appear out of alignment if countertop is not level Weak unstable floor Be sure floor is level and can adequately support range Contact a carpenter to correct sagging or sloping floor Kitchen cabinet misalignment may make range appear to be unlevel Be sure cabinets are square and have sufficient room for range clearance Cannot move appliance easily Appliance must be accessible for service Cabinets not square or are built in too tight Contact a cabinet maker to correct the problem Contact builder or installer to make appliance accessible Carpeting interferes with range Provide sufficient space so range can be lifted over carpet Gas line is hard plumbed Have a flexible A G A C G A approved metal appliance connector installed Surface burners do not light Surface Control knob has not been completely turned to LITE Push in and turn the Surface Control knob to LITE until burner ignites and then turn control knob to desired flame size Burner ports are clogged With the burner off use a small gauge wire or needle to clean ports See Surface Burners in the cleaning chart under General Cleaning for additional cleaning instructions Range power cord is disconnected from outlet Electric Ignition Models only Be sure cord is securely plugged into the outlet Electrical power outage electric
4. and also cause damage to the range Do not allow children to climb or play around the range The weight of a child on an open door may cause the range to tip resulting in serious burns or other injury AGIA Do not use the oven or broiler compartment for storage Do not store items of interest to children in the cabinets above a range or on the backguard of a range Children climbing on the range to reach items could be seriously injured PAGINA Never Use Your Appliance for Warming or Heating the Room e Storage in or on Appliance Flammable materials should not be stored in an oven broiler compartment near surface burners broiler compartment or in the storage drawer This includes paper plastic and cloth items such as cookbooks plasticware and towels as well as flammable liquids Do not store explosives such as aerosol cans on or near the range e Do Not Leave Children Alone Children should not be left alone or unattended in the area where appliance is in use They should never be allowed to sit or stand on any part of the appliance DO NOT TOUCH SURFACE BURNERS AREAS NEAR THESE BURNERS OVEN BURNERS OR INTERIOR SURFACES OF THE OVEN Both surface and oven burners may be hot even though flames are not visible Areas near surface burners may become hot enough to cause burns During and after use do not touch or let clothing or other flammable materials touch these areas until they have had sufficient time to cool Among t
5. ignition models only Burners can be lit manually See Setting Surface Controls in this Owner s Guide Surface burner flame burns half way around Burner ports are clogged With the burner off clean ports by using a small gauge wire or needle Moisture is present after cleaning Lightly fan the flame and allow burner to operate until flame is full Dry the burners thoroughly following instructions in the General Cleaning section Surface burner flame is orange Dust particles in main line Allow the burner to operate a few minutes until flame turns blue In coastal areas a slightly orange flame is unavoidable due to salt air Oven does not operate Be sure the oven controls are set correctly for the desired function See Setting Oven Controls in this Owner s Guide or Entire Appliance Does Not Operate see below Be sure regulator gas valve is ON See installation instructions Entire appliance does not operate Make sure electrical cord plug is plugged tightly into outlet electric ignition models only Service wiring not complete Contact servicer or dealer Electrical power outage electric ignition models only Check house lights to be sure Call your local electric company for service Surface burners can be lit manually See Setting Surface Controls in this Owner s Guide Be sure gas supply is turned on Cooktop and or oven light some models does not work Burned out or
6. loose bulb See Changing Cooktop and or Oven Lights some models section in this Owner s Guide to replace or tighten the bulb 14 Oven smokes excessively during broiling Meat too close to the broil burner Reposition the rack to provide more clearance between the meat and the broiler Meat not properly prepared Remove excess fat from meat Slash remaining fatty edges to prevent curling but do not cut into the lean Broiler pan used without grid or grid covered with foil DO NOT use the broiler pan without the grid or cover the grid with foil Broiler drawer needs to be cleaned Excessive smoking is caused by a build up of grease or food spatters If the broiler is used often clean on a regular basis Broiler drawer is open Drawer door should be closed when broiling Poor baking results Many factors affect baking results Make sure the proper rack position is used Center food in the oven and space pans to allow air to circulate Allow the oven to preheat to the set temperature before placing food in the oven Try adjusting the recipe s recommended temperature or baking time Oven Control Errors This oven is equipped with a state of the art electronic oven controller Among its many features is a full time oven circuit diagnostics system The controller constantly monitors its internal circuitry as well as several crucial oven circuits to insure they are all operating correctly If at any time one of thes
7. of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing Proper relationship of utensil to flame will also improve efficiency e Know which knob controls each surface burner Place a pan of food on the burner before turning it on and turn the burner off before removing the pan e Always turn knob to the full LITE position when igniting top burners Visually check that burner has lit Then adjust the flame so it does not extend beyond the edge o the utensil e Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Burners To reduce the risk of burns ignition of flammable materials and spillage due to unintentional contact with the utensil the handle of the utensil should be positioned so that it is turned inward and does not extend over adjacent surface burners e Never Leave Surface Burners Unattended at High Heat Settings Boilovers cause smoking and greasy spillovers that may ignite or a pan that has boiled dry may melt e Protective Liners Do not use aluminum foil to line surface burner pans or oven bottom except as suggested in this manual Improper installation of these liners may result in risk of electric shock or fire e Glazed Cooking Utensils Only certain types of glass glass ceramic ceramic earthenware or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature Check t
8. or any other appliance WHAT TO DO IF YOU SMELL GAS e Do not try to light any appliance e Do not touch any electrical switch do not use any phone in your building e Immediately call your gas supplier from a neighbor s phone Follow the gas supplier s instructions e If you cannot reach your gas supplier call the fire department Installation and service must be performed by a qualified installer servicer or the gas supplier 2 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance Save these instructions for future reference This guide contains important safety symbols and instructions Please pay attention to these symbols and follow all instructions given Here is a brief explanation of the use of these symbols GOIN this symbol will help alert you to situations that may cause serious bodily harm death or property damage YANG This symbol will help alert you to situations that may cause bodily injury or property damage e Remove all tape and packaging before using the range Destroy the carton and plastic bags after unpacking the range Never allow children to play with packaging material e Proper Installation Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Fuel Gas Code ANSI Z223 latest edition or in Canada CAN CGA B149 1 and CAN CGA B149 2 and the National Electrical Code ANSI NFPA No 70 latest e
9. soak the burners in a 1 1 solution of ammonia and water for 30 to 40 minutes For stubborn stains scrub with soap and water or a mild abrasive cleanser and a damp cloth Dry the burners thoroughly in a warm oven for 30 minutes Then replace them making sure they are properly seated and level DO NOT wash burner units in the dishwasher To Replace Burners 1 Slide the burner tube over the gas valve at the front of the range front burners fit over the right valve rear burners fit over the left valve on each side of the range Tilt burner so that the locating tab will slide into the slot on the support bar Make sure burners are properly seated on support bar and are level Replace shipping screws if desired 11 General Cleaning Figure 1 z i Pe al iti l l SS aa Figure 2 To Remove and Replace Oven Bottom To Remove Oven Bottom 1 2 4 Remove the oven racks Remove the two hold down screws Figure 1 at the rear of the oven bottom panel If the screws are too tight to remove by hand use a screwdriver To lift out the bottom panel place fingers in the slots in the bottom Lift the rear of the panel up and back until it is clear of the lip at the front of the panel Figure 2 Lift the bottom up and out To Replace the Oven Bottom 1 Place the oven bottom in the oven with the back raised about 6 or until you can insert the front of the oven bottom under the hold dow
10. 4 Expenses for making the appliance accessible for servicing such as removal of trim cupboards shelves etc which are not a part of the appliance when it was shipped from the factory 5 Damages to finish after installation 6 Replacement of light bulbs and or fluorescent tubes on models with these features This warranty does not cover the following 1 CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY NOTE Some states do not allow the exclusion or limitation of incidental or consequential damages so this limitation or exclusion may not apply to you 2 Service calls which do not involve malfunction or defects in workmanship or material or for appliances not in ordinary household use The consumer shall pay for such service calls 3 Damages caused by services performed by servicers other than Electrolux Home Products North America or its authorized servicers use of parts other than genuine Electrolux Home Products parts obtained from persons other than such servicers or external causes such as abuse misuse inadequate power supply or acts of God 4 Products with original serial numbers that have been removed or altered and cannot be readily determined Keep your bill of sale delivery slip or some other appropriate payment record The date on the bill establishes the warranty period should service be required If service is perfor
11. IONS FOR CLEANING YOUR RANGE e Clean the range regularly to keep all parts free of grease that could catch fire Pay particular attention to the area underneath each surface element Do not allow grease to accumulate Refer to the hood manufacturer s instructions for cleaning Kitchen cleaners and aerosols Always follow the manufacturer s recommended directions for use Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury CONTINUOUS CLEANING OVENS e Do Not Use Oven Cleaners on the oven liner or any of the continuous cleaning surfaces Continuous cleaning surfaces can be identified by their rough surface finish Grounding Instructions electric ignition models only GIT Avoid fire hazard or electrical shock Do not use an adapter plug an extension cord or remove grounding prong from electrical power cord Failure to follow this warning can cause serious injury fire or death PGRN this appliance is equipped with a 3 prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle DO NOT cut or remove the grounding prong from this plug For personal safety the range must be properly grounded For maximum safety the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded DO NOT Operate the range using a 2 prong adapter or an extension cord If a 2 prong wall recept
12. Rack Position A 2nd Rack Position e 3rd Rack Position T 4th Rack Position TT Set 5th Rack Position or 6th Rack Position A for roasting large food items only Bake and Broil Bake 1 Arrange oven racks while the oven is still cool See Arranging Oven Racks under Before Setting Oven Controls 2 Push in and turn the Temperature Control knob counter clockwise to the not look identical to the oven control 3 preheat the oven for 10 to 12 minutes before baking Preheating is not om Your Tange They are only necessary when roasting cooking casseroles or broiling most foods representational 4 When cooking is finished turn the Temperature Control knob to OFF Broil if equipped QFE 1 Slide broiler drawer out to the stop position 2 Remove broiler pan and insert Figure 1 3 Always position rack before setting control while range is cool 4 Position rack by tilting front of rack up and pulling rack out from locating holes in rear of broiler drawer Reposition back of rack in the desired locating holes and allow front of rack to slide down into the corresponding slots in front of broiler drawer Figure 2 For rare meats position the rack closer to the burner upper position For medium foods use middle position For well done foods such as chicken lobster tails or thick cuts of meat position the rack further from the burner PICK UP BROIL PAN lower position S5 AND INSERT FROMISIDE
13. S 5 Place insert on broiler pan then place meat on insert DO NOT use the broiler pan without the insert DO NOT cover the insert with aluminum foil The exposed fat could ignite 6 Place broiler pan on rack make sure the broiler pan and insert is positioned as shown Figure 1 7 Slide the broiler drawer all the way into the range 8 Push in and turn the Temperature Control knob counter clockwise to BROIL 9 Broil on one side until food is browned turn and cook on the second side Season and serve ALWAYS pull the broiler drawer out to the stop position before turning or removing food 10 When broiling is finished turn the Temperature Control knob to OFF 11 When removing broiler pan from broiler drawer always use pot holders 3 REAR HOLE TILT FRONT OF RACK POSITIONS TO ADJUST WEIN Do NOT use the broiler drawer for storage Items placed in the broiler drawer will catch fire NASON should a broil fire occur leave the broiler drawer closed and turn the oven off If the fire continues throw baking soda on the fire or use a fire extinguisher DO NOT put water or flour on the fire Flour may be explosive 3 FRONT SLOT POSITIONS Oven Cleaning Follow these cleaning precautions e Allow the oven to cool before cleaning e Wear rubber gloves when cleaning the appliance manually REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LA
14. TER NANG TON Ammonia must be rinsed before operating the oven Provide adequate ventilation ENG TN Do NOT line the oven walls bottom racks or any other part of the appliance with aluminum foil Doing so will destroy heat distribution produce poor baking results and cause permanent damage to the oven interior aluminum foil will melt to the interior surface of the oven ZANNI DO NOT use oven cleaners gritty cleansers coarse abrasive pads or brushes silicone sprays or metal scrapers on the interior walls oven frame or ceiling of a continuous cleaning oven Permanent damage to the oven may result Porcelain Enamel Oven and Broiler Drawer area Porcelain has a smooth finish and is a type of glass fused to metal Oven cleaners can be used on all interior oven surfaces General Cleaning Remove soils using hot soapy water Do not allow food spills with a high sugar or acid content such as milk tomatoes saukerkraut fruit juices or pie filling to remain on the surface as they may cause a dull spot even after cleaning To Remove Heavy Soil 1 Allow a dish of ammonia to sit in the oven overnight or for several hours with the oven door closed Clean softened spots using hot soapy water Rinse well with water and a clean cloth 2 If soil remains use a soap filled scouring pad or a nonabrasive cleaner If necessary use an oven cleaner following manufacturer s instructions DO NOT mix ammo
15. acle is the only available outlet it is the personal responsibility of the consumer to have it replaced with a properly grounded 3 prong wall receptacle installed by a qualified electrician See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions Grounding type wall receptacle Do not under any circumstance cut remove or bypass the grounding prong Power supply cord with 3 prong grounding plug Surface Unit Flame Size Never extend the flame beyond the outer edge of the utensil A higher flame simply wastes heat and energy and increases your risk of being burned by the flame WRONG For most cooking start on the highest control setting and then turn to a lower one to complete the process Use the chart below as a guide for determining proper flame size for various types of cooking The size and type of utensil used and the amount of food being cooked will influence the setting needed for cooking For deep fat frying use a thermometer and adjust the surface control knob accordingly If the fat is too cool the food will absorb the fat and be greasy If the fat is too hot the food will brown so quickly that the center will be undercooked Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly Flame Size Type of Cooking High Flame Start most foods bring water to a boil pan broiling Me
16. ap filled scouring pad Rinse and wipe dry with a clean cloth Remove all cleaners or the porcelain may become damaged during future heating DO NOT use spray oven cleaners on the range top Stainless Steel Chrome Parts Drip Pans Clean with hot soapy water and a dishcloth Rinse with clean water and a cloth Cover stubborn spots with an ammonia soaked paper towel for 30 40 minutes Rinse Cleaners made especially for stainless steel are recommended Be sure to rinse the cleaners as bluish stains may occur during heating and cannot be removed Oven Racks Remove racks See Removing and Replacing Oven Racks under Before Setting Oven Controls Use a mild abrasive cleaner following manufacturer s instructions Rinse with clean water and dry After cleaning the racks rub the sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad oil this will make the racks glide easier into the rack positions Oven Door Sk DO HAND CLEAN FRAME K Sy WAG ww N DO HAND i CLEANDOOR DO NOT G HAND R CLEAN OVEN DOOR GASKET To clean oven door wash with hot soapy water and a clean cloth DO NOT immerse the door in water DO NOT clean the oven door gasket The oven door gasket is made of a silicone rubber material on non self cleaning models which is essential for a good seal Care should be taken not to rub damage or remove the g
17. asket 10 General Cleaning Venturi Burner Models When lowering the top grasp the sides with fingertips only Be careful not to pinch fingers Also DO NOT drop or bend the rangetop when raising or lowering This could damage the surface DO NOT turn the burners on when the cooktop is raised for cleaning Be sure that the top is completely lowered and securely in place before turning on the burners To Raise and Lower the Top for Cleaning 1 2 ve Remove burner grates and spillover bowls Set aside Grasp the sides of the cooktop and then lift from the front Lift the top high enough to allow the support rods to snap into place The Lift up rods will support the top in its raised position Clean underneath using hot soapy water and a clean cloth then dry Lower the top gently by pushing back on each rod This will release the notched support Hold the range top and slide the range top down into the range frame To Remove and Replace Burners for Cleaning To Remove Burners 1 2 Remove shipping screws with a Phillips Head screwdriver See illustration for screw locations Tilt the burner at the end closest to the support bar until the locator tab is released front burners tilt right rear burners tilt left Move it toward the back of the range This will separate it from the gas valve at the front of the range Venturi Style Support Bar To clean
18. dition or in Canada CSA Standard C22 1 Canadian Electricl Code Part 1 and local code requirements Install only per installation instructions provided in the literature package for this range Ask your dealer to recommend a qualified technician and an authorized repair service Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency e User servicing Do not repair or replace any part of the appliance unless specifically recommended in the manuals All other servicing should be done only by a qualified technician This may reduce the risk of personal injury and damage to the range e Never modify or alter the construction of a range by removing leveling legs panels wire covers anti tip brackets screws or any other part of the product AWARNING e All ranges can tip e Injury to persons could result e Install anti tip device packed with range e See Installation Instructions NENNE To reduce the risk of tipping the range must be secured by properly installed anti tip bracket provided with the range To check if the bracket is installed properly visually check that rear leveling leg is inserted into and fully secured by the anti tip bracket by removing lower panel or storage drawer Refer to the Installation Instructions for proper anti tip bracket installation Stepping leaning or sitting on the doors or drawers of this range can result in serious injuries
19. dium Flame Maintain a slow boil thicken sauces gravies steam Low Flame Keep foods cooking poach stew These settings are based on using medium weight aluminum pans with lids Settings may vary when using other types of pans Proper Surface Burner Adjustments The color of the flame is the key to proper burner adjustment A good flame is clear blue and hardly visible in a well lighted room Each cone of flame should be steady and sharply defined Adjust or clean burner if flame is yellow orange To clean burner see instructions under General Cleaning Venturi Surface Burner Models Setting Surface Controls The surface control knobs shown below may not look identical to the Surface Controls knobs on your range They are only representational E E OFF HI ITE Setting Clock and Minute Timer some models CLOCK TIMER Flashing indicates Minute Timer mode 4 Y Each burner lights from either an electric ignitor or a standing pilot depending on your model Standing pilots must be lit initially Refer to your installation instructions for instructions on lighting the standing pilot Standing pilot will remain lit when the burners are turned off Models with electric ignitors light automatically each time a control knob is turned to the LITE position To operate the surface burner 1 Place cooking utensil on burner 2 Push in and turn the Surface Control k
20. e systems fails the controller will immediately stop operation and beep continuously flashing an error code of F1 or F3 in the display window if equipped Poor baking results Many factors affect baking results Make sure the proper rack position is used Center food in the oven and space pans to allow air to circulate Allow the oven to preheat to the set temperature before placing food in the oven Try adjusting the recipe s recommended temperature or baking time 15 GIBSON RANGE PLATINUM ADVANTAGE WARRANTY Your Gibson range is protected by this warranty WARRANTY PERIOD THROUGH OUR AUTHORIZED SERVICERS WE WILL THE CONSUMER WILL BE RESPONSIBLE FOR FULL TWO YEAR WARRANTY Two years from original purchase date Pay all costs for repairing or replacing any parts of this appliance which prove to be defective in materials or workmanship Costs of service calls that are listed under NORMAL RESPONSIBILITIES OF THE CONSUMER LIMITED 3RD 5TH YEAR WARRANTY Electric Third through fifth years from original purchase date Provide replacement surface heating elements oven heating elements surface and oven element switches or even thermostat for any such part found to be defective in materials or workmanship Replacement of glass smoothtop that cracks due to thermal breakage not customer abuse or defective in materials or workmanship Diagnostic costs and any transportation and labor cos
21. es time v reverses time To Set the Minute Timer 1 Push wes 0 00 will appear in the display window The timer can be set for any amount of time from 00 01 minute to 12 00 hours 2 Push in and hold a until the correct amount of time appears in the display a Advances time J reverses time The minute timer will automatically start when the button is released The will flash to indicate Minute Timer mode 3 When the set time has passed the control will display 0 00 and beep three times The timer will continue to beep until is pressed 4 Push to cancel the timer and return to the clock mode 6 Before Setting Oven Controls Oven Vent Location The oven vent is located below the backguard When the oven is on warm air is released through the vents This venting is necessary for proper air circulation in the oven and good baking results Arranging Oven Racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL PRIOR TO OPERATING THE OVEN Always use oven mitts when using the oven REMOVING amp REPLACING OVEN RACKS To remove pull the rack forward until it stops Lift up front of rack and slide out To replace fit the rack onto the guides on the oven walls Tilt the front of the rack upward and slide the rack back into place ARRANGING OVEN RACKS WITH 5 RACK POSITIONS To bake on 1 rack place the rack on position 3 or 4 To bake on 2 racks place the racks on positions 2 and 4 ea 1st
22. face or oven lights Wear a leather faced glove for protection against possible broken glass To Change the Oven Light some manual clean models On some models the oven light automatically turns on when the door is opened Some models have a switch located on the control panel to turn on the light The oven light is located at the rear of the oven To replace the oven light 1 Turn electrical power off at the main source or unplug the range 2 Replace bulb with a new 40 watt appliance bulb 3 Turn power back on again at the main source or plug the range back in 4 The clock if equipped will then need to be reset To reset see Setting the Clock and Minute Timer in this Owner s Guide 2 Change the Cooktop Light some models Turn power off at the main source or unplug the range Remove Phillips Head screws 2 that secure the light cover and then lift the light cover off 3 Remove bulb by rolling back and up Install the new bulb by sliding down and rolling forward into place 4 Re install light cover and secure with Phillips Head screws 2 13 Avoid Service Checklist Before you call for service review this list lt may save you time and expense The list includes common occurrences that are not the result of defective workmanship or materials in this appliance OCCURRENCE POSSIBLE CAUSE SOLUTION Range is not level Poor installation Place oven rack in center of oven Place a level on the oven rack
23. he manufacturer s recommendations for cooktop use IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN e Use Care When Opening Oven Door Stand to the side of the range when opening the door of a hot oven Let hot air or steam escape before you remove or replace food in the oven e Keep Oven Vent Ducts Unobstructed The oven vent is located below the backguard Touching the surfaces in this area when the oven is operating may cause severe burns Also do not place plastic or heat sensitive items on or near the oven vent These items could melt or ignite e Placement of Oven Racks Always place oven racks in desired location while oven is cool If rack must be moved while oven is hot use extreme caution Use potholders and grasp the rack with both hands to reposition Do not let potholders contact the hot heating elements in the oven Remove all utensils from the rack before moving e Do not use the broiler pan without its insert The broiler pan and its insert allow dripping fat to drain and be kept away from the high heat of the broiler e Do not cover the broiler insert with aluminum foil Exposed fat and grease could ignite e Cold temperatures can damage the electronic control When using the appliance for the first time or when the appliance has not been used for an extended period of time be certain the unit has been in temperatures above 32 F 0 C for at least 3 hours before turning on the power to the appliance IMPORTANT INSTRUCT
24. hese areas are the cooktop surfaces facing the cooktop the oven vent openings and surfaces near these openings oven door and window e Wear Proper Apparel Loose fitting or hanging garments should never be worn while using the appliance Do not let clothing or other flammable materials contact hot surfaces e Do Not Use Water or Flour on Grease Fires Smother the fire with a pan lid or use baking soda a dry chemical or foam type extinguisher e When heating fat or grease watch it closely Fat or grease may catch fire if allowed to become too hot e Use Only Dry Potholders Moist or damp potholders on hot surfaces may result in burns from steam Do not let potholders touch hot heating elements Do not use a towel or other bulky cloth instead of a potholder e Do Not Heat Unopened Food Containers Buildup of pressure may cause container to burst and result in injury e Remove the oven door from any unused range if it is to be stored or discarded IMPORTANT ELECTRIC IGNITION MODELS ONLY Do not attempt to operate the oven during a power failure If the power fails always turn off the oven If the oven is not turned off and the power resumes the oven will begin to operate again Once the power resumes reset the clock and oven function IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP WGI Use Proper Flame Size Adjust flame size so it does not extend beyond the edge of the utensil The use
25. med it is in your best interest to obtain and keep all receipts This written warranty gives you specific legal rights You may also have other rights that vary from state to state Service under this warranty must be obtained by contacting Electrolux Home Products This warranty only applies in the 50 states of the U S A Puerto Rico and Canada Product features or specifications as described or illustrated are subject to change without notice All warranties are made by Electrolux Home Products North America a division of White Consolidated Industries Inc In Canada your appliance is warranted by WCI Canada Inc 03 G RA 01 rev 01 2001 USA 800 944 9044 Electrolux Home Products North America P O Box 212378 Augusta GA 30917 Canada 866 213 9397 English 866 294 9911 French Electrolux Home Products North America 6150 McLaughlin Road Mississauga Ontario Canada L5R 4C2
26. n lip at the front of the panel Push the back of the oven bottom down fully into place on the metal flanges and insert the hold down screws 12 General Cleaning The door is heavy For safe temporary storage lay the door flat with the inside of the door facing down Changing Cooktop and or Oven Lights if equipped _ Screws To Remove and Replace Oven Door To Remove Oven Door 1 Open the door 2 Remove screws located on the inside of the oven door near the hinges A one on each side 3 Close the door to the quarter open position Grasp the door firmly on both sides and lift up and off the hinges 4 To clean oven door follow the instructions provided in the cleaning chart under General Cleaning Lift door straight off 2 door hinges V7 oeer tin e To Replace Oven Door 1 Besurethe hinge arms are in the quarter open position Be careful if pulling the hinges open by hand The hinges may snap back against the oven frame and could pinch fingers 2 Hold the door at the sides near the top Insert the hinge arms into slots at the bottom of the door 3 Hinge arms must go into the range slots evenly The hinge arms should be inserted into the bottom corners of the door as far as they can go 4 Ifthedooris notin line with the oven frame remove it and repeat the above steps NAN Be sure the range is unplugged and all parts are COOL before replacing the sur
27. nia with other cleaners 3 Clean any soil from the oven frame the door liner outside the oven door gasket and the small area at the front center of the oven bottom Clean with hot soapy water Rinse well using clean water and a cloth Adhere to the following precautions when using oven cleaners 1 DO NOT spray on the electrical controls or switches because it could cause a short circuit and result in sparking or fire 2 DO NOT allow a film from the cleaner to build up on the temperature sensing bulb it could cause the oven to heat improperly The bulb is located in the rear of the oven Carefully wipe the bulb clean after each oven cleaning being careful not to move the bulb A change in its position could affect how the oven bakes Avoid bending the bulb and capillary tube 3 DONOT spray any cleaner on the oven door trim or gasket broiler drawer glides handles or any exterior surfaces of the range plastic or painted surfaces The cleaner can damage these surfaces Continuous Cleaning Oven some models Continuous cleaning ovens have a special coating which is a porous ceramic material This rough coating tends to prevent grease spatters from forming little beads which run down the side walls leaving streaks that require hand cleaning Instead when spatter hits the porous coating it disperses and is partially absorbed This spreading action increases the exposure of oven soil to heated air making it less noticeable Soil may n
28. nob to LITE Note All electronic ignitors will click at the same time However only the burner you are turning on will ignite 3 Visually check that the burner has lit 4 After the burner lights turn the control knob to the desired flame size The control knobs do not have to be set at a particular mark Use the guides and adjust the flame as needed DO NOT cook with the control knob in the LITE position The electronic ignitor will continue to click if left in the LITE position Electric Ignition Models In the event of an electrical power outage the surface burners can be lit manually To light a surface burner hold a lit match to the burner head then slowly turn the surface control knob to LITE Use caution when lighting surface burners manually Do not place plastic items such as salt and pepper shakers spoon holders or plastic wrappings on top of the range when itis in use These items could melt or ignite Potholders towels or wood spoons could catch fire if placed too close to a flame Your model may be equipped with the clock shown below Follow the instructions to set the clock and minute timer on your range Not all manual clean ranges are equipped with a clock To Set the Clock When the range is first plugged in or when the power supply to the range has been interrupted 12 00 will flash in the display window 1 Push aca 2 Pushin and hold a or v until the correct time appears in the display a Advanc
29. ot disappear completely Remaining soil will gradually fade with continued oven use The special coating works best on small amounts of spatter Larger spills or spills generating from sugar egg and dairy mixtures do not clean as well If difficult soils occur 1 Remove the oven racks and cookware 2 Remove soils by completing steps a or b below a Use hot soapy water and wash soils using a nylon bristly brush or a nylon mesh scouring pad DO NOT rub or scrub with paper towels cloths or sponges They will leave lint on the oven coating b Apply ammonia with a sponge and dab it into the porous coating Leave the ammonia on the soiled area for 30 minutes 3 Rinse with clear water 4 Close the oven door and push in and turn the Temperature Control knob to 450 F 230 C 5 Operate oven for 15 minutes 6 Remaining soil will fade with continued oven use To Clean the Oven Bottom All Models The oven bottom is porcelain enamel in all models and can be removed for cleaning See To Remove and Replace Oven Bottom under General Cleaning 9 General Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range be sure all controls are turned OFF and the range is cool Remove spillovers and heavy soiling as soon as possible Regular cleanings will reduce the effort required for major cleanings later Surfaces How to Clean Aluminum Trim Pieces amp Vinyl Use hot soapy water and a clo
30. th Dry with a clean cloth Glass Painted and Plastic Body Parts Control Knobs and Decorative Trim Pieces For general cleaning use hot soapy water and a cloth For more difficult soils and built up grease apply a liquid detergent directly onto the soil Leave on soil for 30 to 60 minutes Rinse with adamp cloth and dry DO NOT use abrasive cleaners on any of these materials they can scratch SS la 3 Before cleaning the control panel turn all controls to OFF and remove the control knobs To remove pull each knob straight off the shaft Clean as instructed above Squeeze excess water from the cloth before wiping the panel especially when wiping around the controls Excess water in or around the controls may cause damage to the appliance To replace knobs after cleaning line up the flat sides of both the knob and the shaft then push the knob s into place Porcelain Enamel Burner Grates Cooktop Surface Below Cooktop Broiler Pan amp Insert Broiler Drawer Door Liner and Oven Bottom Clean burner grates broiler pan and insert in the dishwasher and dry upon removal If soils are not removed follow the cooktop cleaning instructions below Gentle scouring with a soapy scouring pad will remove most spots Rinse with a 1 1 solution of clean water and ammonia If necessary cover difficult spots with an ammonia soaked paper towel for 30 to 40 minutes Rinse with clean water and a damp cloth then scrub with a so
31. ts which are required because of service Applicable to the State of Alaska LIMITED WARRANTY Time periods listed above All of the provisions of the full and limited warranties above and the exclusions listed below apply Costs of the technician s travel to the home and any costs for pick up and delivery of the appliance required because of service NORMAL EXCLUSIONS IF YOU NEED SERVICE RESPONSIBILITIES OF THE CONSUMER In the U S A your appliance is warranted by Electrolux Home Products North America a division of White Consolidated Industries Inc We authorize no person to change or add to any of our obligations under this warranty Our obligations for service and parts under this warranty must be performed by us or an authorized Electrolux Home Products North America servicer In Canada your appliance is warranted by WCI Canada Inc This warranty applies only to products in ordinary household use and the consumer is responsible for the items listed below 1 Proper use of the appliance in accordance with instructions provided with the product 2 Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in accordance with all local plumbing electrical and or gas codes 3 Proper connection to a grounded power supply of sufficient voltage replacement of blown fuses repair of loose connections or defects in house wiring
Download Pdf Manuals
Related Search