Drolet 45109A Stove User Manual
Contents
1. 13 AVERAGE ENERGY YIELD OF ONE AIR DRIED CORD OF CUT WOOD 13 TESTING YOUR WOOD 14 THE FIRST FIRES 14 IGNITION 14 ASH DISPOSAL 15 AIR CIRCULATION SYSTEM 16 MAINTENANCE 16 GLASS 16 GASKETING 16 PAINT 17 WHEN DO I NEED TO REPLACE THE FIREBRICKS 17 REPLACEMENT PARTS2. 17 DROLET LIMITED LIFETIME WARRANTY 18 REGISTER YOU WARRANTY ONLINE To receive full warranty coverage you will need to show evidence of the date you purchased your stove Keep your sales invoice We also recommend that you register your warranty online at www drolet ca Registering your warranty online will help us track rapidly the information we need on your stove 2 INTRODUCTION STOVE BUILDER INTERNATIONAL INC one of the most important wood stove and fireplace manufacturers in Canada congratulates you on your purchase and wishes to help you get maximum satisfaction from your wood stove In the pages that follow we will give you advice on wood heating and controlled combustion as well as technical specifications regarding installation operation and maintenance of the model you have chosen The instructions pertaining to the installation of your wood stove comply with UL 1482 standards Read this entire manual before you install and use your new stove If this stove is not properly installed a house fire may result To reduce the risk of fire follow the installation instructions Failure to follow instructions may result in property damage bodily injury or even death Consult your municipal building department or fire officials about restrictions and installations requirements in your area and the need to obtain a permit Make sure you ke
3. indirect consequential damages of any nature which are in excess of the original purchase price of the product DESCRIPTION WARRANTY APPLICATION PARTS LABOUR Combustion chamber welds only castings and convector airmate Lifetime 5 years Plating defective manufacture subject to limitations above Lifetime n a Secondary air tubes vermiculite baffle C Cast baffle and handle assembly 5 years n a Stainless steel baffle and parts 5 years 3 years Carbon steel baffle and parts 2 years 1 year Blowers thermal switches rheostat and other controls 2 years 1 year Paint peeling gaskets insulation and ceramic glass thermal breakage only 1 year n a Pictures required Shall your unit or a components be defective contact immediately your DROLET dealer Prior to your call make sure you have the following information necessary to your warranty claim treatment Your name address and telephone number Bill of sale and dealer s name Serial number and model name as indicated on the nameplate fixed to the back of your unit Nature of the defect and any relevant information Before shipping your unit or defective component to our plant you must obtain from your DROLET dealer an Authorization Number Any merchandise shipped to our plant without authorization will be refused automatically and returned to sender
4. WOOD STOVE The wood must have dried for 9 to 15 months such that the humidity content in weight is reduced below 20 of the weight of the log It is very important to keep in mind that even if the wood has been cut since one two or even more years it is not necessarily dry if it has been stored in poor conditions under extreme conditions it may even rot instead of drying The vast majority of the problems related to the operation of a wood stove are caused by the fact that the wood used was too damp or had dried in poor conditions These problems can be ignition problems creosote build up causing chimney fires low energy yield blackened windows incomplete log combustion 14 Smaller pieces of wood will dry faster All logs exceeding 6 in diameter should be split The wood should not be stored directly on the ground Air should circulate through the cord A 24 to 48 air space should be left between each row of logs which should be placed in the sunniest location possible The upper layer of wood should be protected from the element but not the sides TESTING YOUR WOOD When the stove is thoroughly warmed place one piece of split wood about five inches in diameter parallel to the door on the bed of red embers Close the door If ignition of the piece is accomplished within 90 seconds from the time if was placed in the stove your wood is correctly dried If ignition takes longer your wood is damp If your wood hisses and wate
5. functions by convection that is through the displacement of hot air accelerated upwards and its replacement with cooler air If necessary the hot air distribution from the stove may be facilitated by a blower or the installation of floor or wall grids The wood stove must not be hooked up to a hot air distribution system since an excessive accumulation of heat may occur A wood stove must never be installed in a hallway or near a staircase since it may block the way in case of fire or fall to respect required clearances 6 CLEARANCES FROM COMBUSTIBLES It is of outmost importance that the clearances to combustible materials be scrupulously respected upon installation of the stove you have selected Refer to the tables below Single pipe Double pipe A B C D E F 29 30 39 34 3 4 22 32 Floor to ceiling height must be at least 7 84 in all cases The clearance between the flue pipe and a wall are valid only for vertical walls and for vertical flue pipe The flue pipe must not go through roof trussing an attic a wardrobe a floor a combustible partition or similar spaces A flue pipe crossing a combustible wall must have a minimum clearance of 18 To reduce flue pipe clearances from combustible materials contact your local safety department For reduced clearances refer to NFPA 211 table 9 6 6 1 7 CHIMNEY Your wood stove may be hooked up with a factory built or masonry chimney If
6. you are using a factory built chimney it must comply with UL 103 standards therefore it must be a Type HT 2100 F It is extremely important that it be installed according to the manufacturer s specifications If you are using a masonry chimney it is important that it be built in compliance with the specifications of the National Building Code It must be lined with fire clay bricks metal or clay tiles sealed together with fire cement Round flues are the most efficient The interior diameter of the chimney flues must be identical to the stove s smoke exhaust 6 A flue which is too small may cause draught problems while a large flue favours rapid cooling of the gas and hence the build up of creosote and the risk of chimney fires Note that it is the chimney and not the stove which creates the draught effect your stove s performance is directly dependent on an adequate draught from your chimney The following recommendations may be useful for the installation of your chimney 1 Do not connect this unit to a chimney flue serving another appliance 2 It must rise above the roof at least 3 0 9 mm from the uppermost point of contact 3 The chimney must exceed any part of the building or other obstruction within a 10 3 04 m distance by a height of 2 0 6 m 4 Installation of an interior chimney is always preferable to an exterior chimney Indeed the interior chimney will by definition be hotter than an exterior chim
7. READ AND KEEP THIS MANUAL FOR REFERENCE 45109A 2010 09 22 INSTRUCTIONS amp OPERATIONS MANUAL DROLET COMPAK EPA EXEMPT US ENVIRONMENTAL PROTECTION AGENCY 28A CERTIFIED WOODSTOVES Verified and tested following UL 1482 Standards by Manufactured by STOVE BUILDER INTERNATIONAL INC 1700 Leon Harmel Quebec Quebec G1N 4R9 Tel 418 527 3060 Fax 418 527 4311 www drolet ca 1 TABLE OF CONTENTS INTRODUCTION 2 ASSEMBLY 3 INSTALLATION 5 POSITIONING THE STOVE 5 CLEARANCES FROM COMBUSTIBLES 6 CHIMNEY 7 CHIMNEY CONNECTOR STOVE PIPE 8 TYPICAL INSTALLATIONS 9 WOOD STOVE UTILISATION
8. blower is available The part number is AC02050 Thermodisc The thermodisc is installed on the blower s electrical supply cord and it will start the blower when the stove s temperature reaches 120 F 49 C and cut off power when the stove cools down below 100 F 37 C Information regarding installation of the thermodisc is included with the device MAINTENANCE Your Drolet stove is a high efficiency stove and therefore require little maintenance It is important to perform a visual inspection of the stove every time it is emptied in order to insure that no parts have been damaged in which case repairs must be performed immediately GLASS Inspect the glass regularly in order to detect any cracks If you spot one turn the stove off immediately Do not abuse the glass door by striking or slamming shut Do not use the stove if the glass is broken If the glass on your stove breaks replace only with glazing supplied from the Drolet dealer To replace the glass remove the screws retaining the glass mouldings inside the door Remove the mouldings and replace the damaged piece with a new one Perform the procedure backwards after replacing When replacing the glass you should change the glass gasket to make sure you keep it sealed Never wash the glass with a product that may scratch Use a specialized product available in the stores where wood stoves are sold The glass should be washed only when cold GASKETING I
9. e use of unauthorized parts or others than original parts void this warranty An authorized qualified technician must perform the installation in accordance with the instructions supplied with this product and all local and national building codes Any service call related to an improper installation is not covered by this warranty The manufacturer may require that defective products be returned or that digital pictures be provided to support the claim Returned products are to be shipped prepaid to the manufacturer for investigation If a product is found to be defective the manufacturer will repair or replace such defect and reasonable transportation fees will be refunded Repair work covered by the warranty executed at the purchaser s domicile by an authorized qualified technician requires the prior approval of the manufacturer Labour cost and repair work to the account of the manufacturer are based on predetermined rate schedule and must not exceed the wholesale price of the replacement part All labour and freight costs covered by this warranty are limited according to the table below The manufacturer at its discretion may decide to repair or replace any part or unit after inspection and investigation of the defect The manufacturer may at its discretion fully discharge all obligations with respect to this warranty by refunding the wholesale price of any warranted but defective parts The manufacturer shall in no event be responsible for any special
10. embers replace the firebricks immediately If you only notice cracks on some firebricks it is not necessary to replace them The frequency at which you will change your firebricks depends on how often you use your stove There are different sizes of firebricks Most stores will sell firebricks with a dimension of 4 5 X9 X1 25 These firebricks are adequate for many stoves but will not fit on all Drolet units It is preferable that you visit our parts section in order to clearly identify the type of firebrick that you need REPLACEMENT PARTS Replacement parts can be located on our web site at www drolet ca in the replacement parts section at the top 18 DROLET LIMITED LIFETIME WARRANTY The warranty of the manufacturer extends only to the original consumer purchaser and is not transferable This warranty covers brand new products only which have not been altered modified nor repaired since shipment from factory Proof of purchase dated bill of sale model name and serial number must be supplied when making any warranty claim to your DROLET dealer This warranty applies to normal residential use only Damages caused by misuse abuse improper installation lack of maintenance over firing negligence or accident during transportation are not covered by this warranty This warranty does not cover any scratch corrosion warping or discoloration caused by over firing abrasives or chemical cleaners Any defect or damage caused by th
11. ep this instruction manual It will always be helpful We also suggest that you consult our web site at www drolet ca It will provide you with a full range of information such as how to order replacement parts CAUTIONS HOT WHILE IN OPERATION KEEP CHILDREN CLOTHING AND FURNITURE AWAY CONTACT MAY CAUSE SKIN BURNS DO NOT USE CHEMICALS OR FLUIDS TO IGNITE THE FIRE DO NOT LEAVE THE STOVE UNATTENDED WHEN THE DOOR IS SLIGHTLY OPENED DO NOT BURN WASTES FLAMMABLE FLUID SUCH AS GASOLINE NAPHTHA OR MOTOR OIL DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM ALWAYS CLOSE THE DOOR AFTER THE IGNITION 3 ASSEMBLY Legs installation Position the stove on its back and screw the legs in place with 8 screws 8 bolts and 8 washers Ash lip Installation Screw in place with 2 bolts 2 screws and 2 washers 4 Cast iron flue collar installation 1 Peel off the tape from the back of the gasket and attach the gasket to the rope groove at the back of the flue collar 2 Mount flue collar on top of the stove Make sure that the damper holes on each side of the flue collar are parallel to the back of the stove 3 Fix the flue collar with the hardware supplied 4 Install the flue damper inside the flue collar as illustrated Back air intake ash dump cap and firebricks installation 1 Slide the back air intake A behind the bracket welded on the back of the stove 2 Install the bottom f
12. irebricks first then the side ones 3 Install the back firebricks 4 Insert the ash dump cap on the bottom hole A 5 INSTALLATION SAFETY NOTICE IF THIS STOVE IS NOT PROPERLY INSTALLED A HOUSE FIRE MAY RESULT TO REDUCE THE RISK OF FIRE FOLLOW THE INSTALLATION INSTRUCTIONS FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE BODILY INJURY OR EVEN DEATH CONSULT YOUR MUNICIPAL BUILDING DEPARTMENT OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATIONS REQUIREMENTS IN YOUR AREA USE SMOKE DETECTORS IN THE ROOM WHERE YOUR STOVE IS INSTALLED KEEP FURNITURE AND DRAPES WELL AWAY FROM THE STOVE NEVER USE GASOLINE GASOLINE TYPE LANTERN FUEL KEROSENE CHARCOAL LIGHTER FLUID OR SIMILAR LIQUIDS TO START OR FRESHEN UP A FIRE KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE STOVE IN THE EVENT OF A CHIMNEY FIRE CALL THE FIRE DEPARTMENT DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM A SOURCE OF FRESH AIR INTO THE ROOM OR SPACE HEATED SHALL BE PROVIDED WHEN REQUIRED POSITIONING THE STOVE It is very important to position the wood stove as close as possible to the chimney and in an area that will favour the most efficient heat distribution possible throughout the house The stove must therefore be installed in the room where the most time is spent and in the most spacious room possible Recall that wood stoves produce radiating heat the heat we feel when we are close to a wood stove A wood stove also
13. more than two 90 degrees elbow in the smoke exhaust system Installation of a barometric draught stabiliser fireplace register on a smoke exhaust system is prohibited Stove Pipe 9 TYPICAL INSTALLATIONS FACTORY BUILT CHIMNEY ROOF FLASHING 18 CLEARANCE WALL SUPPORT WALL RADIATION SHIELD RAIN CAP Wall installation CEILING SUPPORT RADIATION SHIELD Vertical installation 10 MASONRY CHIMNEY Clay liner Thimble Clean out door 11 FACTORY BUILT THIMBLE 12 BRICK THIMBLE 13 WOOD STOVE UTILISATION Your heating unit was designed to burn wood only no other materials should be burnt Wastes and other flammable materials should not be burnt in your wood stove Any type of wood may be used in your stove but specific varieties have better energy yields than others Please consult the following table in order to make the best possible choice AVERAGE ENERGY YIELD OF ONE AIR DRIED CORD OF CUT WOOD Wood species Energy yield millions of BTU cord High energy yield Oak 29 Sugar Maple 28 Beech 26 Yellow birch 25 Ash 24 Elm 23 Medium energy yield Larch Tamarack 23 Red Maple 23 Douglas red fir 23 Silver birch 22 Alder 18 Poplar 17 Hemlock 17 Low energy yield Spruce 17 Pine 17 Bass 16 Fir 13 Data provided by Energy Mines and Resources Canada IT IS EXTREMELY IMPORTANT THAT YOU USE DRY WOOD ONLY IN YOUR
14. ney being heated up by the ambient air in the house Therefore the gas which circulates will cool more slowly thus reducing the build up of creosote and the risk of chimney fires 5 The draught caused by the tendency for hot air to rise will be increased with an interior chimney 6 Using a fire screen at the extremity of the chimney requires regular inspection in order to insure that it is not obstructed thus blocking the draught and it should be cleaned when necessary 7 Clean your chimney every 2 months 8 CHIMNEY CONNECTOR STOVE PIPE The stove pipe must be made of aluminized or cold roll steel with a minimum thickness of 0 021 or 0 53 mm It is strictly forbidden to use galvanized steel Your smoke pipe should be assembled in such a way that the male section of the pipe faces down Attach each of the sections to one another with three equidistant metal screws The system should be attach to the unit using screws The pipe must be short and straight All sections installed horizontally must slope at least 1 4 inch per foot with the upper end of the section toward the chimney To insure a good draught the diameter of the coupling pipe should be 6 and total length should never exceed 8 to 10 24 to 3 04 m Except for cases of vertical installation cathedral roof style where the smoke exhaust system can be much longer and connected without problem to the chimney at the ceiling of the room There should never be
15. r or vapour escapes at the ends of the piece your wood is soaked or freshly cut Do not use this wood in your stove Large amounts of creosote could be deposited in your chimney creating potential conditions for a chimney fire THE FIRST FIRES The fresh paint on your stove needs to be cured to preserve it s quality Once the fuel charge is properly ignited only burn small fires in your stove for the first four hours of operation Make sure that there s enough air circulation while curing the stove The odours could be smelled during the 3 or 4 first fires Never start your stove outside You will not be able to see if you are over heating IGNITION Place several rumpled sheets of paper in the centre of the combustion chamber Place 8 to 10 pieces of small dry kindling wood over the paper in the form of a tent You may also place a few pieces of heating wood but choose the smaller ones No chemical product should be used to light the fire Before igniting the paper and kindling wood it is recommended that you warm up the chimney This is done in order to avoid back draft problems often due to negative pressure in the house If such is the case open a window slightly near the stove and twist together a few sheets of newspaper into a torch Light up this paper torch and hold it as close as possible to the mouth of the pipe inside the combustion chamber to warm up the chimney Once the updraft movement is initiated you are ready to ignite
16. t is recommended that you change the door gasket which makes your stove door air tight once a year in order to insure good control over the combustion maximum efficiency and security To change the door gasket simply remove the damaged one Carefully clean the available gasket groove apply a high temperature silicone sold for this purpose and install the new gasket You may light up your stove again approximately 24 hours after having completed this operation 17 WARNING NEVERS OPERATE THE STOVE WITHOUT A GASKET OR WITH A BROKEN ONE DAMAGE TO THE STOVE OR EVEN HOUSE FIRE MAY RESULT PAINT Only clean your stove with a dry soft clothe that will not harm the paint finish If the paint becomes scratched or damaged it is possible to give your wood stove a brand new look by repainting it with a 1200o F heat resistant paint For this purpose simply scrub the surface to be repainted with fine sand paper clean it properly and apply thin coats 2 of paint successively Refer to page 18 of the present manual for the paint curing process WHEN DO I NEED TO REPLACE THE FIREBRICKS The firebricks in your stove are there to protect the steel from the excessive heat of the flames and embers Without firebricks your stove would wear out prematurely It could also become to hot and cause objects or structures nearby to catch fire If you notice that some firebricks are disintegrated and the steel is directly in contact with the fire or
17. the stove by lighting the paper and kindling wood inside the combustion chamber We therefore advise you to leave the door slightly opened 1 4 for a 10 to 30 minutes period under supervision in order to allow for good combustion After this time you must close the door 15 ASH DISPOSAL Ashes should be removed from the stove every few days or when ashes get to 2 to 3 inches deep Always empty the stove when it is cold such as in the morning Always dispose of ashes in a metal container with a tight fitting lid Place this container on a non combustible floor or on the ground well away from all combustible materials pending final disposal If the ashes are disposed of by burial in soil or otherwise locally dispersed they should be retained in the close container until all cinders have thoroughly cooled CAUTIONS ASHES COULD CONTAIN HOT EMBERS EVEN AFTER TWO DAYS WITHOUT OPERATING THE STOVE THE ASH PAN CAN BECOME VERY HOT WEAR GLOVES TO PREVENT INJURY NEVER BURN THE STOVE WITH THE ASH TRAP OPEN THIS WOULD RESULT IN OVER FIRING THE STOVE DAMAGE TO THE STOVE AND EVEN HOUSE FIRE MAY RESULT THE INSTALLATION OF A LOG CRADLE IS NOT RECOMMENDED IN YOUR DROLET WOOD STOVE NEVER PUT WOOD ABOVE THE FIREBRICK LINING OF THE FIREBOX 16 AIR CIRCULATION SYSTEM In order to improve air circulation in the room where the wood stove is installed certain options are available for specific stove models Blower A variable speed control
Download Pdf Manuals
Related Search