Dodge 2008 Sprinter Automobile User Manual
Contents
1. Never call on unauthorized technicians and always refuse spare parts which are not originals 10 1 invesit 195052765 02 11 2008 Xerox Business Services 122. ca Using the freezer to its full potential The temperature inside the ge ECO freezer compartment automatically adjusts itself according to the position of e the thermostat knob 2 ge warmest e coldest We recommend however a medium position ECO is the optimal temperature for energy saving levels switches the appliance off including the refrigerator Do not re freeze food that is defrosting or that has already been defrosted These foods must be cooked and eaten within 24 hours e Fresh food that needs to be frozen must not come into contact with food that has already been defrosted Fresh food must be stored in the top FREEZER and STORAGE compartment where the temperature drops below 18 C and guarantees rapid freezing WARNING to avoid blocking the air circulation inside the freezer compartment it is advisable not to obstruct the ventilation holes with food or containers e Do not place glass bottles which contain liquids and which are corked or hermetically sealed in the freezer because they could break e The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment for example Kg 24h 4 Do not open the door during freezing If there is a power cut or malfunction do not open the freezer door This will help maintain the temperature inside the freezer ensuring that foods ar
3. Operating Instructions REFRIGERATOR FREEZER COMBINATION Contents EN Installation 2 3 2 Positioning and connection Reversible doors English 1 Description of the appliance 4 Overall view Start up and use 5 6 Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care 7 Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours BAN 134 NF UK Defrosting the appliance Replacing the light bulb BAN 134 NF S UK BAN 144 NF UK Precautions and tips 8 General safety BAN 144 NF S UK Disposal Respecting and conserving the environment Troubleshooting 9 Assistance 10 1 inpesit Installation Before placing your new appliance into operation please read these operating instructions carefully They contain important information for safe use for installation and for care of the appliance Please keep these operating instructions for future reference Pass them on to possible new owners of the appliance Positioning and connection Positioning Place the appliance in a well ventilated humidity free room 2 Do not obstruct the rear fan grills The compressor and condenser give off heat and require good ventilation to operate correctly and save energy 3 Leave a space of at least 10 cm between the top part of the appliance and any furniture above it and at least 5
4. ZER OPERATION knob on Access the light bulb by removing the cover as indicated in the diagram 2 pull the plug out of the socket Replace it with a similar light bulb within the power range indicated on the cover 10VV Cleaning the appliance e The external and internal parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap Do not use solvents abrasive products bleach or ammonia e The removable accessories may be soaked in warm water and soap or dishwashing liquid Rinse and dry them carefully e The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power The appliance must be switched off and the plug must be pulled out before cleaning the appliance Avoiding mould and unpleasant odours e The appliance is manufactured with hygienic materials which are odour free In order to maintain an odour free refrigerator and to prevent the formation of stains food must always be covered or sealed properly e f you want to switch the appliance off for an extended period of time clean the inside and leave the doors open Precautions and tips The appliance was designed and manufactured in compliance with international safety standards The fol lowing warnings are provided for safety reasons and must be read carefully This appliance
5. cm between the sides and any furniture side walls 4 Ensure the appliance is away from any sources of heat direct sunlight electric stove etc 5 In order to maintain the correct distance between the appliance and the wall behind it fit the spacers supplied in the installation kit following the instructions provided Levelling 1 Install the appliance on a level and rigid floor 2 If the floor is not perfectly horizontal adiust the refrigerator by tightening or loosening the front feet Electrical connections After the appliance has been transported carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains Before inserting the plug into the electrical socket ensure the following e The appliance is earthed and the plug is compliant with the law e The socket can withstand the maximum power of the appliance which is indicated on the data plate located on the bottom left side of the fridge e g 150 VV e The voltage must be in the range between the values indicated on the data plate located on the bottom left side e g 220 240V e The socket is compatible with the plug of the appliance If the socket is incompatible with the plug ask an authorised technician to replace it see Assistance Do not use extension cords or multiple sockets Once the appliance has been installed the power supply cable and the electrical socket must be easily accessible The cable
6. complies with the following Community Directives 73 23 EEC of 19 02 73 Low Voltage and subsequent amendments 89 336 EEC of 03 05 89 Electromagnetic na Compatfibility and subsequent amendments 2002 96 CE General safety The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual The appliance must not be installed outdoors even in covered areas It is extremely dangerous to leave the appliance exposed to rain and storms Do not touch the appliance with bare feet or with wet or moist hands and feet Do not touch the internal cooling elements this could cause skin abrasions or frost freezer burns When unplugging the appliance always pull the plug from the mains socket do not pull on the cable Before cleaning and maintenance always switch off the appliance and disconnect it from the electrical supply t is not sufficient to set the temperature adjustment knobs on appliance off to eliminate all electrical contact In the case of a malfunction under no circumstances should you attempt to repair the appliance yourself Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance Do not use any sharp or pointed utensils or electrical equipment other than the type recommended by t
7. e conserved for at least 9 14 hours Ice ice tray The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness the ice no longer comes into contact with the food placed inside the freezer compartment furthermore the dripping of the water during filling is avoided a lid to cover up the hole after filling with water is also provided 1 Pull out the tray by pushing it up Check that the tray is ompletely empty and fill it with water through the opening provided Take care not to exceed the level indicated MAX WATER LEVEL Excess water prevents the ice cubes from dispensing if this happens wait for the ice to melt and empty the tray Turn the tray 90 due to the connected compartments each mould fills with water see diagram Close the opening with the lid provided and put the tray back When the ice has formed minimum time approximately 8 hours knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening M P o 13431 H3IYM gt XV Maintenance and care 1 inbesit Switching the appliance off Replacing the light bulb During cleaning and maintenance it is necessary to To replace the light bulb in the refrigerator compartment disconnect the appliance from the electricity supply pull out the plug from the electrical socket Follow the instructions below 1 set the FREE
8. e door too frequently in order to conserve energy e Do not fill the appliance with too much food cold air must circulate freely for food to be preserved properly If circulation is impeded the compressor will work continuously Do not place hot food directly into the refrigerator The internal temperature will increase and force the compressor to work harder and will consume more energy Defrost the appliance if ice forms see Maintenance A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption e Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping see Maintenance Troubleshooting 1 inbesit If the appliance does not work before calling for Assistance see Assistance check for a solution from the following list e Malfunctions Possible causes Solutions The internal light does not e The plug has not been inserted into the electrical socket or not far illuminate enough to make contact or there is no power in the house The motor does not start e The appliance comes with a motor protection control see Start up and use The refrigerator and the freezer do not cool well The doors do not close properly or the seals are damaged The doors are opened too frequently The TEMPERATURE ADJUSTMENT knob is not in the correct position The refrigerator or the freezer have been over fi
9. he manufacturer inside the frozen food storage compartments Do not put ice cubes taken directly from the freezer into your mouth Do not allow children to tamper with the controls or play with the appliance Under no circumstance should they be allowed to sit on the bins or to hang from the door Keep packaging material out of the reach of children It can become a choking or suffocation hazard Disposal e Observe local environmental standards when disposing packaging material for recycling purposes e The European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment The crossed out wheeled bin symbol on the product reminds you of your obligation that when you dispose of the appliance it must be separately collected Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance Respecting and conserving the environment e Install the appliance in a fresh and well ventilated room Ensure that it is protected from direct sunlight and do not place it near heat sources e Try to avoid keeping the door open for long periods or opening th
10. lled The food inside the refrigerator is beginning to freeze The TEMPERATURE ADJUSTMENT knob is not in the correct position The motor runs continuously The door is not closed properly or is continuously opened The outside ambient temperature is very high The appliance makes a lot of noise The appliance has not been installed on a level surface see nsta ation The appliance has been installed between cabinets that vibrate and make noise The internal refrigerant makes a slight noise even when the compressor is off This is not a defect it is normal Some of the external parts of the e These raised temperatures are necessary in order to avoid the formation refrigerator become hot of condensation on certain parts of the product Assistance Before calling for Assistance Check if the malfunction can be solved on your own see Troubleshooting If after all the checks the appliance still does not operate or the problem persists call the nearest Service Centre model serial number Communicating type of malfunction e appliance model Mod ma ae wee eee e serial number S N Total 340 sl Freez Capac Glass This information can be found on the data aoe Gross Net JGross Poder de Cong clase N plate located on the bottom left side of the a n Ti 250 Made in Italy 13918
11. more complex features consult the following pages FREEZER OPERATION Knob LAMP see Maintenance SHELVES REFRIGERATOR OPERATION Knob FRUIT and VEGETABLE bin FREEZER and STORAGE compartment STORAGE compartments Ice ice trays STORAGE compartmente Levelling FEET e Varies by number and or position Available only on certain models Removable lidded shelf with EGG TRAY Removable multipurpose SHELVESe BOTTLE shelf Start up and use i npesir Starting the appliance Using the refrigerator to its full potential Before starting the appliance follow the installation Place only cold or lukewarm foods in the compartment instructions see nsta ation not hot foods see Precautions and tips Before connecting the appliance clean the compartments and accessories well with lukewarm e Remember that cooked foods do not last longer than water and bicarbonate raw foods The appliance comes with a motor protection control system which makes the compressor start approximately Do not store liquids in open containers They will 8 minutes after being switched on The compressor also increase humidity in the refrigerator and cause starts each time the power supply is cut off whether condensation to form voluntarily or invol
12. must not be bent or compressed The cable must be checked regularly and replaced by authorised technicians only see Assistance The manufacturer declines any liability should these safety measures not be observed Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use Before using the appliance please read the instructions below WARNING THIS APPLIANCE MUST BE EARTHED Replacing fuse covers When replacing a faulty fuse a 18amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re fitted If the fuse cover is lost the plug must not be used until a replacement is obtained Replacement fuse covers If a replacement fuse cover is fitted it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug Changing the plug Removing the plug If your appliance has a non rewireable moulded plug and you should wish to remove it to add a longer cable or to re route the mains cable through partitions units etc please ensure that either The plug is replaced by a fused 13amp re wireable plug bearing the BSI mark of approval or The mains cable is wired directly into a 13amp cable outlet controlled by a switch in compliance with BS 5733 which is accessible without moving the appliance Disposing of the plug Cut off and dispose of the supplied plug if it does not fit you
13. r socket The cable should be cut as close as possible to the moulded plug Remove the fuse WARNING To avoid a shock hazard do not insert the discarded plug into a socket anywhere else 1 invesit Fitting a new plug Reversible doors IMPORTANT WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE vel o Green and Yellow Earth aln BROWN Mola s s K amp N crossen Blue Neutral Brown Live 2 As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug proceed as follows Connect Green and Yellow wire to terminal marked E or or coloured Green and Yellow Connect Brown wire to terminal marked L or coloured red or brown 3 Connect Blue wire to terminal marked N or coloured Black or Blue Ifa 13amp plug BS 1363 is used it must be fitted with a 13amp fuse If you are in any doubt about the electrical supply to your machine consult a qualified electrician before use 4 CE Marking certifies that this appliance conforms to the following EEC directives Low Voltage Equipment 73 23 EEC amp 93 68 EEC Electromagnetic Compatibility 89 336 EEC 92 31 EEC amp 93 68 EEC 5 Description of the appliance Overall view The instructions contained in this manual are applicable to different model refrigerators The diagrams may not directly represent the appliance purchased For
14. untarily blackout 1 Insert the plug into the socket and ensure that the internal light illuminates the FREEZER OPERATION knob must not be on the position 2 Tum the FREEZER OPERATION knob and REFRIGERATOR OPERATION knob to an average value After a few hours you will be able to put food in the refrigerator SHELVES with or without grill Due to the special guides the shelves are removable and the height is adjustable see diagram allowing easy storage of large containers and food Height can be adjusted without complete removal of the shelf Setting the temperature The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob min warmest max coldest We recommend however a medium position Chiller system No Frost It is recognisable by aeration cells located on the back walls of the compartments The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation The system maintains an optimal humidity level in the compartment preserving the original quality of the food preventing the food from sticking together and making defrosting a thing of the past Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel Close bottles and wrap food tightly
Download Pdf Manuals
Related Search