Home

Digital Stream F1-FOX Stereo System User Manual

1. e Display Format Select the format which the video is to be displayed on screen D Other Setting OSD Transparency Sets the level of transparency for the menus displayed on top of the video picture Information Box Display Time Sets the length of time the information box displayed on the screen after changing the service 3 2 Service Organising This menu gives users access to options that allow them to organise their Networks TV services and Radio services The default PIN Code is KREKO A Organise TV Services Organise All Services This mode allows users to Delete Move Lock Skip and Rename TV services Delete 1 You can delete unwanted services using the i red key 2 Mark the services that you want to delete in grey colour 3 Press the key 4 If you want to cancel the deletion press the EXIT key Move 1 You can move the service to wanted position using the green key 2 The icon will be marked in front of the service number 3 Select new position with the a Y lt gt keys 4 Press the key 5 If you want to return to the original position press the EXIT key Lock 1 You can lock the services using the yellow key Guide of b Main Menu AV move the cursor lt 4 gt select your preference return to the previous menu exit from the menu screen 2 E ma PAHA AV move the cursor enter the digits for PIN code EFS go to the sele
2. Time Setting Current Time Organise Favourite Wakeup Time Sleep Time Organise Networks AN Output Setting Vidio Output Audio Output Screen Mode Display Format Other Setting OSD Transparency Info Box Display Time Menu Installation Calender Service Searching Antenna Setting Antenna Alternative Satellite Name LNB Frequency 22KHz Tone DiSEqC Input Selection Motorised System Manual Search Antenna Alternative Frequency Polarisation Symbol Rate FEC Network Search Automatic Skip Advanced Automatic Search Antenna Alternative Satellite Name Utility Biorthythm Status STB Status Signal Detection STB Upgrade Default Setting HQFOX 200
3. lt is possible to search for new service and edit the services Provides the information about the manufacturer 4 UTILITY page 33 Provides a Calendar and Biorhythm feature 1 TV GUIDE You can set the reservation and view the programme event name for each service in the TV Guide mode To access this mode press the key or select the TV Guide in the Main Menu Change between the TV Guide and Radio Guide by pressing the key In the TV guide mode you can select between four different modes iJ red key Shows Now or Next programmes for the day green key Shows programme list for one week e yellow key Shows the Reserved programme List blue key Shows simple TV Guide on the playback TV or Radio GUIDE Now Next mode This mode consists of the programme name event name event duration time current time and displaying box Displaying box appears when using the keys or pressing the key after using the keys to highlight the desired programme To reserve a desired programme move the highlight bar using the and keys and then press the white key To move through the pages of programmes use the keys To view the reserved programme list Select the L yellow key TV GUIDE Weekly mode This mode displays all the events for the day The reservation method of Weekly mode is the same as the Now Next mode If you want to view the event list for another programme select the desired programme using
4. the key To view the event list for the other days of the week use the keys TV GUIDE Reserved mode This mode shows the reserved programme event list You can reserve up a maximum of twenty programmes The list displays the programme name date duration time timer mode and event name If you want to cancel the reserved programme select the programme using the keys and press the white key Main Menu Guide of b TU Guida HDA move cursor for service selection previous or next page move the highlight bar amp display the service change between Now or Next programme show Weekly programme list show the Reserved programme list Simple TV Guide reserve the programme display the selected service exit from the menu screen Guide of Main Menu T NTN A a Lire AV move the cursor lt qp select the level for blocking services O O enter the digits for PIN code return to the main menu UET exit from the menu screen ima ae ae AV move the cursor Y3 go to the selected menu return to the main menu tN exit from the menu screen TV GUIDE Quick mode This mode shows in the A V playback mode The red line represents the current time and shows the programme progress status using a Black White progress bar The time range of the bar is made up from the past one hour and the next two hours 2 PARENTAL CONTROL In the Parental Control Menu you can set the censo
5. time input the offset value by using the standardized information of current service area The time setting will be used as the standardised time for the I Plate TV Guide and Wake up Sleep timer Current time is based on the TDT Time Description Table at the stream of the current service The adjustment step unit 7 is 30 minutes by using the keys If the stream of yg Ove the cursor current service doesn t contain the TDT the Current Time Sula elect your preferences cannot be set up and the Time Offset will be displayed in adjust the wake up or sleep time and selects the wake up service number grey return to the main menu exit from the menu screen A Wakeup Time Select the time in which the STB will power on according to the timer or make the timer disabled Wakeup Service No Select the service number in the STB power on mode select the TV or Radio by pressing the key Sleep Time Enter the time for the STB switching off to standby mode according to the timer set type AV move the cursor lt gt select your preference return to the previous menu C A V Output Setting 2 exit from the menu screen Video Output CVBS RGB S VHS Set the Video mode for the TV SCART output raj AAP onpa en J Audio Output ca Set the Audio mode which is output from the TV SCART and RCA Jack Stereo Mono Screen Mode Select the screen format of TV which is connected to the TV SCART of STB 4 3 or 16 9
6. tune the position of the motor for better reception In Installer mode this is used to search for the position of a satellite manually Motor Control Search Begin searching for channels on the chosen transponder Goto Moves the motor to the stored position of the selected satellite name Store Stores the current position of the motor for the selected satellite name Reset Resets all stored positions of the motor relative to the 0 position Installer mode only DiSEqC Command Mode Changes the current mode between Installer and User 2 Setting your Receiver for DiSEqC 1 2 You must set your receiver up so that it is ready to use DiSEqC 1 2 To do so do as follows or all 1 Press the key you will now see the Main Menu 2 Select Service Searching option and press the key you will now see the Service Searching menu 3 Select Antenna Setting option and press the key you will now see the Antenna Setting menu 4 Set your Antenna Alternative to 1 by highlighting it using the keys and changing the settings using the keys On this menu you must configure your LNB Settings as well A 5 Set the Motorised System to Enable using the keys LaS 6 The option DiSEqC Input Selection should now be disabled This option is used for DiSEqC 1 0 and cannot be used in conjun ction with DiSEqC 1 2 Please note If you change the Motorised System setting then all previously stored channels will be deleted since each system is
7. C swtich Do the same for any other LNBs that you have Connect one end of a Coaxial cable to the RX output connector of the DiSEqC swtich connect the other end to the LNB IN socket on the STB E DiSEqC 1 2 Connection Please refer to 34 page E Connection of satellite antenna To the digital receiver you can connect either a single satellite antenna directly or LNB of multi feed equipment Guide of Functions LED of STB The message of the LEDs Lighting Emitting Diode on the STB is explained as below Upgrade via Satellite and Personal Computer To maintain the STB up to date it will be possible to upgrade the software of the STB via satellite and personal computer New versions of the software may include new or improved functions for the current one If you want to download and upgrade the software via satellite first of all tune your signal to ASTRA Satellite When the STB switches into Presentation from Standby or you choose the STB Upgrade menu the STB detects the new software If the new software is available the STB will ask you whether it downloads the software or not If you want to download and upgrade the software via personal computer visit our homepage to get more informa tion and the new software Guide of Functions Information Box l Plate l Plate displays when the i key is pressed or when the service is changed It shows the service part and event part When
8. HUMAX Digital Set Top Box for Free To Air Remote Control Unit eee 2 Spe CifiCatlony esemesek 3 4 Support amp Copyright i 5 Set ee 6 STB Connections 7 411 Reference n 11 Guide of Functions 9 12 16 Guide of Main Menu eee 17 33 Motorised System e 34 37 Trouble Shooting Guide 38 39 Menu Tree E AAE sus E EE Donen 40 Remote Control Unit 1 Remote Control Unit RCU mi UHF Information key Displays the programme information box on the screen and is also used as the RED key in the menus Soundtrack key Selects the soundtrack list for the current service and is also used as the GREEN key in the menus Subtitle key Selects the subtitle language list for the current service and is also used as the YELLOW key in the menus UHF function is not available on this STB but this key is used as the BLUE key in the menus Time key Displays the current time on the right side of the screen and is also used as the WHITE key in the menus and reservation CIO Standby key Switches between Operation and Standby mode Selects the TV VCR SAT mode Numeric key Used to select the service and enter the channel information and PIN Code TV Radio key Receiver Switches TV Radio receive mode Mute key Used to enable or disable the audio Returns to the previous menu and screen Volume Up Down key Used to increase or decrease the volume O O Remote Control Uni
9. Teletext To view the teletext you have to use your TV remote control unit not supplied on the STB s RCU because the teletext service is controlled by the television To display the Service List press the key To select the desired service in the list use the keys and press the key The Service List provides you the simple mode and advanced mode To change the mode use the i key Service Configuration In the Service List you can change the attributes of a c service through the Service Configuration When the meee move the cursor desired service is selected press the key At the Bau Previous or next page Service Configuration you can change the favourite type T3 select the favourite type or save i the changes locking status and make the service skipped or deleted To END exit from the Service Configuration save the changes in Service Configuration press the key when the cursor is at Lock Skip or Delete In the advanced Service List it is possible to list All or Favourite service list by using the colour keys as follows iJ red key Service List All i green key Favourite A Service All The keys moves the highlight bar to the previous or next service using the keys moves the higlight bar forwards or backwards by 10 services Select the desired service by using the keys Press the key to view the selected service The right side scroll bar of the screen displays the location of the selecte
10. anually in the iag transponder you have selected Antenna Alternative Select the target antenna for manual search This antenna alternative number is already set in Antenna Setting menu Antenna alternative 16 is for SMATV SMATV Search AV move the cursor In case that several generations use Antenna andLNBin lt gt sat aie ues common as the frequency range of signal is input to IRD is ditectiy down as much as LNB L O Local Oscillator frequency EES start the SMATV search return to the previous menu search the service from 950 to 2150MHz exit from the menu screen Frequency Inputs not RF frequency but the frequency that is down converted through LNB in common The unit is MHz and the range of input is 950 2150MHz Symbol Rate Inputs the symbol rate of the signal you want to find FEC You can select the value of 1 2 2 3 3 4 5 6 7 8 or Auto LNB P AV move the cursor f aes lt q select the searching parameters As there is whether the LNB power of STB is necessary Of input the frequency symbol rate i directly not according to the sort of IF IF converters select a EIB start the SMATV search suitable option for situation return to the previous menu UN exit from the menu screen Satellite Name It is helpful for selecting the above mentioned antenna alter native This has been disabled it is for reference only and cannot be changed within this menu Frequency Input the fre
11. as blow the data of system setting will be changed into the default values and some free to air services of Astral will be stored in replacement of all services found If you press the ee ce ae key the function will be cancelled and return the Installation menu 4 UTILITY STB supports additional functions such as Calendar and Biorythm At the Biorhythm use the keys to adjust your birth year and date to see your current biorhythm status Motorised System DiSEqC 1 2 User Instructions lf you have a DiSEqC 1 2 motorised system then you can take advantage of the DiSEqC 1 2 functions available The following instruction describes how to use the DiSEqC 1 2 functions to store the positions of the satellites and to search for the channels STAB Rotor Sat motor recommended 1 Satellite Setting Menu Options When DiSEqC Motorised System is Enabled in the Antenna Setting a new menu is available for configuring the motor This menu is called Satellite Setting and is accessed by pressing the key while the option Antenna Alternative is highlighted in the Manual Search menu The following options are available on the Satellite Setting menu Satellite Name A selection of satellite names that can be used to identify a motor position If the satellite name you require is not available please use other In installer mode the Satellite Name Reference refers to the 0 position of the motor Movement In User mode this is used to fine
12. as no power No Picture e Check the main power cable and check that it is plugged into a suitable power outlet e Check whether STB is in Standby mode e Ensure that the STB is switched on see above e Check the video output port SCART is firmly connected to the TV or VCR e Check that you have selected the correct channel or Video Output on your TV e Check the brightness level of the TV Poor picture quality e See No Picture above e Check the signal level if this is low then try adjusting the alignment of your dish No Sound e See No Picture above e Check the volume level of the TV and STB e Check the Mute status of the TV and STB Remote Control does not operate Point remote control directly towards the STB e Check and replace batteries On Screen Error Messages No or Bad Signal e Check the LNB replace LNB if necessary e Check the cable from the LNB e Check the position of the dish realign dish if necessary If you are using a DiSEqC 1 0 switch check that you have connected the LNBs to the correct connections on the switch e Check the Signal Strength and the Signal Quality in the Signal Status menu WAT PTV uide System Setting Service Organising Language Setting Menu Language Organise TV Services Organise All Services Audio Language Organise Favourite Subtitle Language Organise Radio Services Organise All Services
13. cted menu return to the previous menu press the key to start service search Ua exit from the menu screen A Antenna Setting Selects the Antenna and LNB setting conditions for Service search As you can change the settings for 22KHz tone and DiSEqC switch there are 16 possible antenna setting for use The values that are set in this menu will be available for selection in other service searching menus Antenna Alternative There are 16 antenna alternatives each one can have differ i ETA the ee ent combinations of settings for 22KHz tone and DiSEqC select LNB frequency or parameters switch lt q In Satellite Name selects the name on the satellite list input the LNB frequency directly EY3 go to the manual search menu return to the previous menu Uam exit from the menu screen Guide of b Main Menu e Satellite Name Selects the satellite name that corresponds to the value of the Antenna Alternative 1 Press the keys to display the Satellite List box 2 Select the wanted satellite name 3 If the desired satellite name is not in the list then select User Defined 4 The keyboard will appear and you can input the satellite name directly The selected satellite name can be help to ME select the antenna alternative in the searching menu but ho it is only possible to change or select the satellite name iN gw selects the satellite name you want to find the Antenna Setting menu cra conim t
14. cted menu return to the previous menu 2 exit from the menu screen i AV move the cursor amp Fa go to the selected menu 2 The symbol 4 will be marked beside the service name return to the previous menu 3 After a service is locked you will need to enter the PIN code in order to view it exit from the menu screen Guide of Main Menu Skip 1 You can skip the services using the blue key 2 The symbol Q will be marked beside the service name 3 When skip is set for service you will not be able to view it when moving through the channels using the keys You will be able to view these services when selecting the channel using the 0 9 keys service list or the key Rename Ti a 1 a can change the service name using the white AV move the cursor i previous or next page 2 When you press this key the keyboard screen will be E delete the selected service di spl ayed move the desired service F lock the selected service ad skip the wanted service EB change the service name You can use the four direction keys to move or select the services 3 Enter the new service name on it a to move the previous service w to move the next service 4 to move back by 10 services gt to move forwards by 10 services You can move through 20 services by using the keys Note The box located between service list and the explanation of the color keys offers the brief information fo
15. d service in relation to all services B Service Favourite To add the services to the Service Favourite use the Service Configuration at Service All When you press the green key in the Service List the favourite service list will display on the screen When you want to see the ser vices added to the favourite group use the keys Guide of Functions AV move the cursor lt q previous or next page CY3 go to the selected service GEN change Simple to Advanced list service list by Favourite C go to the Service Configuration menu exit from the menu screen AV move the cursor lt q previous or next page amp Xa go to the selected service GEN change Simple to Advanced list service list by Favourite go to the Service Configuration menu exit from the menu screen OD Guide of AV gt CIS Main Menu Main Menu The contents of main menu are as follows A move the cursor open the sub menu go to the selected menu 3 Gia exit from the menu screen 1 TV GUIDE page 17 19 lt shows the programme information and the timer programming process of the service Select the TV Guide mode by pressing the key in the Video Audio playback mode 2 PARENTAL CONTROL page 19 lt is possible to control access to certain programmes by set ting the parental level or changing the PIN code To release the parental block for a service enter the PIN code 3 INSTALLATION page 19 33
16. ding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode Sampling Memory Main Processor Flash Memory Program DRAM MPEG 2 ISO IEC 13818 Transport stream Specification MPEG 2 MP ML 60 Mbit s Max 4 3 16 9 720 x 576 MPEG MusiCam Layer amp II Single channel Dual channel Joint stereo Stereo 32 44 1 and 48KHz TMIPS R38930 81 MHz 2Mbyte Asynchronous 2Mbyte A V amp Data In Out TV SCART VCR SCART AUDIO R L RS232C Power Supply Input Voltage Type Power Consumption Standby Power Protection Physical Specification Size W x H x D Weight Net Operating Temp Storage Temp Storage Humidity Video Output CVBS RGB S VHS Audio Output Resolution 20bit DAC max 2 Vrms Video Output CVBS Video Input CVBS RGB S VHS Audio Output Resolution 20bit DAC max 2 Vrms Cinch volume and Mute Control Resolution 20bit DAC max 2 Vrms Transfer rate 115 200 bps 9 pin D sub Type 190 to 250V AC 50 60 Hz SMPS Max 30W lt 8W Seperate internal fuse The input shall have lightning Protection 260 x 50 x 180 mm Around 1 3 Kg 0 C to 45 C 10 C to 70 C 5 95 RH Non Condensing Specification e You can use a special antenna switch with DiSEqC commands When changing channel from ASTRA to EUTELSAT for example a DiSEqC command is sent with the 22KHz tone through the antenna cable The antenna switch
17. e Favourite Radio Services This menu allows the user to add delete move skip lock or rename each radio services in the favourite radio services and group them into the favourite radio services The way to group the services into Favourite is same to that of TV Services Page 23 gt Guide of Main Menu C Organise Networks You can edit the service by using the unit of network rq ODS e miai In the above mentioned picture the network names are displayed on the left side and the TV Radio services con tained within the highlighted network are displayed on the right side When the number of TV Radio services for the network is too many to be displayed in the window then move the cursor to the right window using the gt key and move to the next list by using the a and keys In the picture left you can check what services are available for the current network The operation of Delete Move Rename is available for network only When the number of services is under 10 the gt key is not displayed In radio service icon is marked in front of service number 3 3 Service Searching After inputting the PIN Code PEREI You can enter the Service Searching menu as you enter the Parental Control or Service Organising menu The bar displayed at the bottom of submenu shows the signal quality BER for the parameters AV move the cursor entered After setting the above mentioned parameters E3 go to the sele
18. e the satellite name Searching Mode You can select one of two modes Quick or Detail When you select Quick mode it searches the service by search parameters that is preset When you select Detail mode it searches the service through all field of tuner 950 2150MHz Detail Mode The pre fixed symbol rate list is changed according to antenna alternative and satellite name If you want to add or change it press the i red key The picture of the symbol rate Add Change mode is as follows 1 You cannot change or delete the grey coloured part of the above box that marks symbol rate 2 You can add delete or change the white coloured part of the above box that marks the symbol rate 3 To add the symbol rate move the cursor to blank box and input the symbol rate that you want to add using the 0 9 keys 4 Press the key to confirm 5 If you want to go back to the previous figure during inputting of symbol rate press the 4 key To change the symbol rate move the cursor to the position that you want to change and input the new symbol rate To delete a symbol rate in the above list press the Red key in the selected position and then the symbol rate dis appears The range of symbol rate that is input additionally is 16 30Ms s 6 Press the key to return Automatic Search menu Guide of Main Menu Automatic Skip pa Option to search only Free To Air services N The picture on the right trie
19. he lt gt Jkeys You can input a decimal PID value by using the 0 9 keys on the RCU In hexadecimal input mode press one of the keys to display a hexadecimal keyboard then you can input a hexadecimal PID value on it When there is no PID input Auto is displayed it is the same function with Manual Search After setting the above mentioned value press the key anywhere to start service search directly The picture and found service list during search are the same with Manual Search Guide of Main Menu AV move the cursor lt qp select the searching parameters O input the frequency symbol rate or PID value directly 3 start the advanced search return to the previous menu uw exit from the menu screen Guide of Main Menu l ii E 3 i p m a r oi 4 AV move the cursor lt q p select the searching parameters and type O input the symbol rate directly EE start the Automatic search return to the previous menu Ua exit from the menu screen C Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu search all of the selected satellite without inputting the extra frequency Antenna Alternative Select the target antenna for automatic service search The attribute of this antenna alternative number is already set in Antenna Setting menu and the satellite name is helpful in the selection of the antenna but in this menu you cannot chang
20. he satellite name m returns 5 Satellite name list is put in alphabetical order and the OK Rey al Weer Deine then the i h ter table will displayed and yo order can be changed according to menu language A E he a 6 When inputting the satellite name there is a 16 character return to the antenna setting menu limit CET exit from the menu screen LNB Frequency 1 Select the L O Frequency that is set to antenna 2 You can select the LNB frequency of 5150 9750 10600 10750 11475MHz or Universal by using the keys 3 If the required LNB frequency is not available then select 0 and enter the frequency manually using the 0 9 keys 4 When you select Universal LNB both 9750 and 10600 MHz are supported at the same time and therefore the 22KHz tone setting is not needed Disabled 22KHz Tone In case you are using a Dual LNB or two antennas connected to a 22KHz tone switch box make 22KHz tone switch Enable or Disable to select LNB or antenna DISEgC Input Selection According to the option and position of DiSEqC switch select from A to D of DiSEqC and Disable After setting the above mentioned value press the key except in Satellite Name to move to the Manual Search menu directly Guide of Main Menu Motorized System It is used to set the DiSEqC 1 2 motor by Eutelsat specifica tion If you wish to use this system please refer to page 34 for instructions Service Search OSD If you press the key du
21. he service enter the number by using the keys Itis also possible to change the service by using the keys keys Recall Service list or EPG mode To switch between the video and audio service press the key To select the previously viewed service list press the key in the normal A V playback mode Volume Control To control the volume press the keys Select the mute mode by pressing the key and to release the mute mode press the key again or keys Select the desired audio language of soundtrack by pressing the key The soundtrack OSD is displayed by pressing the key and the initial position of the cursor indicates the soundtrack currently being used To listen to the desired language select it by using the keys In addition you are able to select between the left and right audio by pressing the keys Exit from the menu by pressing the OK or EXIT key and the selected audio soundtrack is maintained j3 It is possible to select a desired language from the Audio Language menu which will be used as your 1 language if supported Guide of Functions The display of the subtitle are tramitted from the EBU teletext specification and DVB Bitmap Press the key to bring up the subtitle language list for the current service Use the keys to select the desired language Then press the key to select the highlighted language the subtitles will now be displayed To cancel the subtitle mode press the key or key again
22. iSEqC 1 2 Connect one end of a 21 pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV Connect one end of a 21 pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR Connect one end of your coaxial cable to the LNB IN connector on the STB and the other end to the REC or Receiver connector on the DiSEqC 1 2 motor Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1 2 motor Reference EGTE TV with VCR and Motorised System with Positioner Connect one end of a 21 pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV Connect one end of a 21 pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket on the STB Connect the motor cables to your positioner please refer to the manual for your positioner and actuator Connect your positioner to your TV if necessary Reference E DiSEqC 1 0 Connection All our receivers are designed to be DiSEqC 1 0 compatible This allows multiple antennas to be connected to the STB at the same time If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1 0 swtich Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEq
23. ng and direct sunlight WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE RISK ELECTRIC SHOCK PARTS INSIDE REFER SERVICING TO QUALIFIED DO NOT OREN SERVICE PERSONNEL This symbol indicates dangerous This symbol indicates AN voltage inside the product that AN important instructions presents a risk of electric shock accompanying the or personal injury product STB Connection There are several ways of connecting the STB to your existing Audio TV system We recommend using one of the following set up for best results ESMEE 7V only Connect one end of a 21 pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV Finally connect the coaxial cable from the LNB to the LNB IN socket on the STB STB Connection e ESATE With Hi Fi System Connect an RCA Cinch stereo cable from the AUDIO L R sockets on the STB to the LINE AUX SPARE OR EXTRA input sockets on your Hi Fi System I Y STB Connection EATE TV with VCR Connect one end of a 21 pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV Connect one end of a 21 pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR Finally connect the coaxial cable from the LNB to the LNB IN socket on the STB Eee TV with VCR and Motorised System D
24. not compatible Your receiver is now ready to use DiSEqC 1 2 To return to the Main Menu use the EXIT key until you are at the Main Menu Motorised System 10 Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish 11 Use the keys to stop the motor when required 12 When you have the best position of the dish go to the Motor Control option and using the keys select Store and press the key The position of the satellite should now be stored 13 If you do not store this position it will be lost when you exit the menu 14 Repeat the process for each satellite if required 5 Moving to a pre set satellite Once you have stored the positions of the satellites you want see left below you can now search for the chan nels transmitted from them Before you can do this you must move the motor to the position of the satellite you wish to search To do this you must access the Satellite Settings menu Do as follows 1 On the Main Menu select Service Searching option and press the key you should now see the Service Searching menu 2 Select the Manual Search option and press the key you should now see the Manual Search menu 3 Select the Antenna Alternative option and press the key you will now see the Satellite Settings menu 4 In the Satellite Settings menu ensure that you have DiSEqC Command Mode option set to User 5 Highlight the option Satellite Name and use the keys t
25. o select the satellite you want to view 6 When you have selected the satellite you wish to view go down to the Motor Control option and again using the lt J keys select goto and press key 7 The motor will now move to the position of the selected satellite 8 The Movement option is used to fine tune the position of the motor 9 When using the Movement option for fine tuning you must remember to store the changes you have made or else these will be lost 6 Searching for channels on your selected satellite Once you have moved the motor into position you can search for the channels transmitted from it To search for channels on your new selected satellite Do as follows 1 Move the motor to the position of the satellite you wish to search see section 5 above 2 On the Main Menu select the service searching option and press the key You will now see the Service Searching menu 3 Select the manual search option and press the OK key You will now see the Manual Search menu 4 Now enter the Frequency and Symbol Rate using the keys Next enter the Polarisation and FEC values using the keys 5 When you have entered all these details in press the OK key and the search will begin 6 When the search has finished press the key to view 7 Repeat the process for all the transponders you want from this satellite Trouble f Shooting Guide r About STB Does not display any message on the front panel or STB h
26. quency of the transponder you want to find manually Guide of Main Menu Polarisation Select the polarisation of the transponder you want to find Horizontal Vertical Auto In horizontal case 18V and in vertical case 13V are output through LNB line Symbol Rate Inputs the symbol rate of the transponder you want to find FEC Forward Error Correction Select the FEC of the transponder you want to find You can select the value of 1 2 2 3 3 4 5 6 7 8 or Auto Network Search You can select Yes or No When you select Yes you can find more transponders using the home network As it refers to NIT during searching if there is the frequency information of other transponder it searches the other transponder besides transponder the user inputs Automatic Skip You can select Yes or No When you select Yes the search will skip all scrambled services When the locked service is scrambled during searching You can skip this service not to save Refer to descriptor of PMT whether it is scrambled or not Advanced Performs a manual search with the ability to enter PID Video Audio PCR values This mode is necessary when the signal you search for a signal The setting of the sub items is the same as Manual Search Video PID Audio PID PCR PID You can set the PID to search the service It is possible that you input PID by decimal or hexadecimal system You can select this mode with t
27. r services that a cursor is located in Organise Favourite TV Services This mode serves to add and delete services to and from the favourite group To add services into Favourites locate the cursor to the desired service and press the key The function of the colour keys is the same as Organise All Services except for the following differences E When you delete a service in the Favourites window the ag Ove the cursor service is excluded from the favourite group and the service previous or next page i f ETE move the selected service is still stored in Services window You can move the service only within Favourites window Guide of A Main Menu To group the services into Favourite 1 Move the cursor to All TV Services plate right by using the gt key 2 Select the service you want to group into Favourite 3 Press the key 4 Move the cursor to Favourite plate left by using the L4 key 5 Press the key to save the selected group Note You can move the cursor to plate by using the keys and select the previous and next page by using the keys B Organise Radio Services This function is the same with TV services except that it uses radio services You can delete or move each radio services and change the radio services attributes Organise All Services This submenu allows the user to rename delete move skip or lock each radio services on all radio service list Organis
28. ring the search service search stops and the searching menu appears When you find all the services the following picture appears Before saving it you can select the service you want to delete Found services OSD The picture above shows services that are found after manual search You can mark the services that you don t want to save using the i red key these services will turn grey To unmark a service select the service and press the i red key on it again Press the key to save or press the key to exit without saving Then Manual Search menu appears When you exit all menus the first service of the found service list is played In the bottom of found service picture network the informa tion of transponder and the number of found service that the services belong to are displayed The deleted service by the Li red key is excepted from counting of the number of sevices At the bottom of the screen that shows the services found in the search the information of transponder and the number of found services that the service belongs to are displayed The deleted service using the i red key is not included in this number Free means the empty part of all service memory this is the amount of space available to store other services in the future Guide of b Main Menu B Manual Search After setting the search parameters like frequency symbol E me rate etc you can find the services m
29. rship classification or change the PIN code Enter the PIN Code PIKO Censorship classification Set the parental level If the level displays with the number it shows the minimum age for viewing the programme The kinds of level are no block 6 10 14 18 and total block To protect the service or view the programme please enter the PIN code Change PIN Code To change the PIN code enter the new code number twice 3 INSTALLATION Select the Installation in the Main Menu mode to select the submenu The menu provides settings for customizing add ing new services and displaying the status of the receiver 3 1 System Setting The system setting gives you the convenience of selecting various languages and adjusting the Time and A V Output modes The System Setting mode supports the STB internal settings according to the connection of the receiver and external units A Language Setting Menu Language You can select the desired language on the language list box by using the keys Select the language to be used for On Screen Display OSD like the menu and banner You can choose the language from a selection of Czech Danish English French German Hungarian Italian Portuguese Spanish Turkish and more When transmitting the broadcasting information like event the selected menu language is applied first Audio language is applied second and then subtitle If none of these languages are available then
30. s to search with varying frequency symbol rate and FEC etc Note But the user should select the satellite name in Antenna Setting menu and when the user inputs the satellite name separately you should select the Detail mode Press the key anywhere to start automatic search The picture during searching is as follows The right picture tries to search with varying frequency symbol rate and FEC etc Satellite name is the name that the user selects to correspond with antenna alternative of antenna setting The bar graph that displays on the bottom of picture shows the progress extent with percent During the search services that are found are displayed as follows 1 Press the EXIT key during automatic search to stop search 2 When finishing search the message that it is finished appears 3 Press the key to return Service Search menu A STB Status Displays the information of H W version S W version Loader version of STB B Signal Detection Shows the Signal Level AGC level and Signal Quality BER of the current service and is help to the initial antenna setting Guide of Main Menu J C STB Upgrade AE You can download and upgrade the software of this STB through ASTRA satellite when the software of new version is released During downloading don t turn off the STB In case of power off turn on the STB and the downloading process will be continued When you press the key at the screen
31. standards Please read the following recommended safety precautions carefully MAINS SUPPLY OVERLOADING LIQUIDS CLEANING VENTILATION ATTACHMENTS CONNECTION TO THE CONNECTION TO THE EARTHING LOCATION 190 250V AC 50 60Hz Do not overload wall outlets extension cords or adapters as this can result in fire or electrical shock Keep liquids away from the STB Disconnect the STB from the wall socket before cleaning it Use a cloth lightly dampened with water no solvents to clean the exterior of the STB Do not block the STB s ventilation slots Ensure that a free airflow is maintained around the STB NEVER stand the STB on soft furnishings or carpets Do not use or store the STB where it is exposed to direct sunlight or near a heater NEVER stack other electronic equipment on top of the STB Do not use any attachments that are not recommended as these may cause hazards or damage the equipment SATELLITE DISH LNB Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite dish FAILURE TO DO SO CAN DAMAGE THE LNB TV or VCR SET Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite dish FAILURE TO DO SO CAN DAMAGE THE TV or VCR SET The LNB cable MUST BE EARTHED to the system earth for the satellite dish The earthing system must comply with SABS 061 Locate the STB indoor place properly to prevent lightening raini
32. t Programme Up Down key Used to tune to the next or previous service Used to move up or down a page in the menu mode Help key Displays the Help box on the screen Recall key Selects the previously viewed channel Displays the TV Radio programme guide Displays the Main Menu on the screen or returns to the screen from a submenu Selects the service list and used to select the item in the menu mode Cursor key Used to move the highlight bar for selecting options in the menus and it can also be used to change up down services and to increase or decrease the audio volume Please note The design of the Remote Control Unit RCU may be changed without notice in advance Specification The concept OSD is for On Screen Display means that Menu displays on the Screen of TV 2 STB S Specification Tuner amp Channel Input Connector Frequency Range Input Impedance Signal Level IF Frequency IF Band width LNB Power amp Polarisation 22 KHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decoder F type IEC 169 24 Female 950 MHz to 2150 MHz 75Q unbalanced 25 to 65dBm 480 MHz 36 MHz Vertical 13 5V Horizontal 18V Current 500mA Max Overload Protection Frequency 22 4KHz Amplitude 0 6 0 2V Version 1 0 1 2 Compatible QPSK 2 31 Ms s Convolutional Code Rate 1 2 2 3 3 4 5 6 and 7 8 with Constraint Length K 7 MPEG Transport Stream A V Deco
33. the first available language is used Audio Language For service that provide various audio language select preferred audio language to used When you change the services firstly the STB tries to retrieve the language for the previous service in the memory of STB If the current service doesn t provide the language Guide of Main Menu i a i 7 T Lanp Sen pa AV move the cursor EY3 go to the selected menu return to the previous menu UN exit from the menu screen F JE g Oe iae mar JLI ee ae Phe ra in the memory the selected audio language in the Language h y Tim a Setting will be used secondly When the selected language is not available thirdly the menu language will be used and then the primary language of the service will be used for audio language Czech Danish English French German Hungarian Italian Portuguese Spanish Turkish and more can be selected in the Audio Language Subtitle Language This service provides various subtitle languages so that user can select desired language AV move the cursor lt gt select the language you want to set on the language list return to the previous menu m exit from the menu screen Language List AV select the language you want to set FH confirm the language and returns to the Language Setting menu return to the language setting menu Guide of Main Menu B Time Setting Current time To set the current
34. will change from using ASTRA to EUTELSAT The concept of DiSEgC is a protective trademark of EUTELSAT Data rate decides the picture quality of digital TV programmes Date rate of about 5 6 Mbit s coincides with the picture quality of a analog TV programme Please note The specification of the STB may be changed without notice in advance Support amp Copyright First and foremost our knowledge of the set top box marketplace along with technical expertise differentiates Humax Moreover we maintain very close working relationships with our customers We take a highly disciplined engineering approach to product design manufacture testing acceptance and to technical and maintenance support We conduct comprehensive testing of the units provide complete documentation and support and deliver the highest quality most consistent products on time every time Humax supports you via its homepage with useful information and new software of the STB When you have a question about this product and Humax please refer the Humax s homepage Homepage hittp www humax co kr To provide you the convenience of usage Humax has the right to make changes and improvements to any of the products described in this manual and the manual of the products without any notice in advance Copyright 2000 HUMAX Co Ltd All rights reserved Safety This STB has been manufactured to satisfy the international safety
35. you move to another service the l Plate should be displayed automatically The time the l Plate is displayed on screen is controlled in the Other Setting menu SERVICE PART The contents of the service part are as follows Plate Icon Current Time Service Name Service Number and Service Icon Subtitle _ Teletext E or Scrambling Service Symbol Signal Quality Bar You can change the service by using the icon to the right side of the service number Before playback the selected service it will be displayed in red color The subtitle teletext or scrambling service symbol is displayed when broadcasters of the desired service support them EVENT PART The event part displays the information of the current and next event To switch from the current event to next use the gt key and from the next event to current use the 4 key The contents of event part are as follows Event Name Event Duration Time Event Description Text Reservation Status You can reserve the programme in the event data display mode by using the key When the current data is displaying on the screen you can reset timer programme Once Daily or Weekly mode When you release the timer programme mode then you will be asked to confirm the action Display the extended event description text by pressing the key in the I Plate with event data displaying mode Guide of Functions Service Change To change t

Digital Stream F1-FOX Stereo System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents