Crosley CR 54 CD Turntable User Manual
Contents
1. DOWN B SKIP 6 is released the CD will start re 5 to play from track 3 Se Searching track 3 NAVEL we During the CD playing condition holding down the button will result in fast forward search or fast backward search FAST FORWARD AND FAST BACKWARD Hold down the UP F SKIP 7 or DOWN B SKIP 6 button during play When the button is held down there will be a continuous change of CD track s position This change of position can be performed even during pause TO CHECK THE REMAINING TIME OF THE DISC Press REMAIN 12 one time during the disc is playing then the display will show the remaining time of the entire disc Display of the remaining time If press two more times of the keys the display will return to the original condition REPEAT PLAYING Press REPEAT 9 key one time ONE TRACK REPEAT will be active One track repeat flashing All track repeat With one more ALL TRACK REPEAT will be active With one further press the repeat mode is cancelled i PROGRAM PLAYING a In CD mode Press MEMORY 10 key one time Program input mode Choose track 4 b Specify a track to play with UP F SKIP 7 or DOWN B SKIP 6 This can also be done with the numerical keypad in the remote control MANUAL SEARCH A STATION TO RECEIVE A WEAK BROADCAST SIGNAL Press the UP F SKIP 7 or DOWN B SKIP 6 button by one pre2. Press REPEAT PRESET to change the channel a EXAMPLE Channel 6 to Channel 8 hee A LIC 1422KHz is stored in CH 8 ee 8 Press the MEMORY 10 once more 1422kHZ is set to channel 8 NOTE The original memory of channel 6 will not be change during above operations Needles are available for additional charges please call us at 1 800 926 7801 www crosleyradio com Program input complete c Pressing MEMORY 10 one time then track 4 is stored into the program 1 position Step a to C can be used to store up to 16 tracks into the program or modified the existing program Play operation d Pressing PLAY PAUSE 19 key to play the program e Press STOP 20 when you wish to stop the play NOTE If the program is already exist press the MEMORY and then press the PLAY PAUSE 19 key the program play will start The program will be cleared when the tray is opened or when the lid is opened CLEAR THE PROGRAM Pressing the MEMORY 10 key one time and then press the STOP 20 key the preset programs will be cancelled INTRO PLAY FUNCTION a During the stop condition pressing the INTRO 8 key to start the into playing After that the first 10 seconds of each song will be played Intro setting Stop condition 450514 b If the INTRO 8 key is pressed again Intro playing the CD will change to the normal playing mode RANDOM PLAY FUN
3. If the product has been dropped or damaged in any way f When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 20 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 21 Wall or ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer 22 Heat The product should be situated away from heat sources such as radiators Heat registers stoves or other products including amplifiers that produce heat A 1 Polarized Plug o apop WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not instal
4. CTION A Press RANDOM 17 key during CD playing or stop condition Random setting stop condition Press once again will cancel the function 4505 1 B If the CD is under stop condition press the PLAY PAUSE 19 During random search key to start the random playing C If the CD is playing the random playing will start in next song ci Note Once the CD program is set the random function can not be activated before the program is cleared TUNER FUNCTION Note The type of reception bands the frequency step and the upper and lower limits of the receiving frequency are depended on the specifications of different area AUTO SEARCHING A STATION During the tuner mode press TUNER 3 to select the desired reception band Press UP F SKIP 7 or DOWN B SKIP 6 key and then release the button when the fast scanning start The frequency will continue to change and will automatically stop when a broadcast station is received NOTE If the UP F SKIP 7 or DOWN B SKIP 6 key is pressed during auto searching the searching will stop at that point When the frequency display pass through the upper limit or the lower limit it will automatically changes to the lower or the upper limit respectively LOCATION OF PARTS 2 PHONO 3 TUNER 4 SENSOR 5 LCD DISPLAY 6 CD TUNER BACKWARD SKIP 7 CD TUNER FORWARD SKIP 8 INTRO 9 REPEAT PRESET 10 MEMORY 11 STAND BY I
5. NDICATOR 12 REMAIN EQ 17 RANDOM 18 OPEN CLOSE 19 PLAY PAUSE 20 STOP 21 VOLUME DOWN 22 VOLUME UP 23 MUTE 15 24 STAND BY 9 25 TURNTABLE 26 SPINDLE 16 m 27 ADAPTER FOR 45 RPM RECORDS 1 28 TONE ARM 12 29 SPEED CONTROL SWITCH 17 30 ARM REST 31 ADAPTOR JACK 32 SPEAKER 13 lt Remote Control Function key gt 14 33 OPEN CLOSE 34 PHONO 35 3 36 2 37 6 38 5 39 9 40 8 41 EQ 25 26 42 10 43 SKIP BACKWARD 44 SKIP FORWARD 45 MEMORY 46 REPEAT 47 VOLUME UP 48 VOLUME DOWN 49 POWER STAND BY 50 MUTE 51 CD 52 TUNER BAND 53 1 54 4 55 7 56 9 57 PLAY PAUSE 58 STOP 27 oa ot 6 50 33 Oa 30 29 28 51 2 Ea 52 gt O35 53 b Oe 6 37 of 54 eo ot 539 5 OSH 55 oo ato gt OS 56 gt Po 43 67 am E135 b 58 46 YTL Whe 31 32
6. ROCK gt Jazz press EQ 16 key results in the following changes CLASSIC POP CD FUNCTION POWER ON Switch on the power and press the CD 1 key to select the CD mode Reading TOC When the lid or tray is closed reading TOC will start If there is no CD inside a DISC display will appear B DRAWER TYPE Press the OPEN CLOSE 18 key one time to open the tray Put a disc inside and then press the Reading TOC After reading TOC OPEN CLOSE 18 key one time to close the tray os uo 6 tt 1J ke After that reading TOC will start TO PLAY THE DISC Press PLAY PAUSE 19 to play the CD Searching track 1 Playing track 1 After reading TOC the disc can start to play anytime SAS l Eg yy E on I 1 ah EN Lr Lix TO PAUSE THE PLAYING A Press PLAY PAUSE 19 during the disc is playing While paused the playing time will flash One more press the PLAY PAUSE 19 key will cancel 1 the pause condition a ics ot TO STOP THE DISC Stop condition TOC display Press STOP 20 key ce TO SPECIFY A TRACK TO PLAY a Press UP F SKIP 7 or DOWN B SKIP 6 to choose a desired track Example The 3rd track Each press will change the track number by one b If the CD is stop and the PLAY PAUSE 19 key is pressed the CD will start to play from track 3 If the CD is playing several seconds after UP F SKIP 7 ma or
7. WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DO NOT REMOVE COVER PILOT LAMPS SOLDERED IN PLACE NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK aroase niis cree ener The exclamation point an equilateral triangle is THE RISK OF ELECTRIC nin an paren Intended io aar unor to f SHOCK DO NOT REMOVE sheha a nat dangerous voltage within COVER OR BACK NO presence of important that may be F sufhclont USER SERVICEABLE Peainistancs sandang magnitude to constitute PARTS INSIDE REFER instruction in the risk of electric shock SERVICING TO QUALIFIED literature accompanying to persons SERVICE PERSONNEL the appliance CAUTION For Compact Disc Units Only INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID DIRECT EXPORSURE TO LASER BEAM SPECIFICATION FREQUENCY RANGE AM 520 1710 KHz FM 87 9 107 9 MHz AC ADAPTOR INPUT AC 120V 60Hz OURPUT DC 12V 1 0A POWER SOURCE ANTENNAS BUILT IN FERRITE BAR FOR AM BUILT IN ANTENNA FOR FM PHONO SPEED CONTROL 33 45 78RPM POWER CONSUMPTION 18W SPEAKERS 4 INCH 8 OHM X 2 DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 910 213500 001 IMPORTANT SAFETY INSTRUCTION PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT Read Instructions All the safet
8. ces This product should be operated only from the type of power sourceindicated on the marking label if you are not sure of the type of power supply to your home Consult your product dealer or local power company For products intended tooperate from battery power or other sources refer to the operating instructions Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Power Cord Protection Power supply cords should be routed so that they are not likely to O ND ARON 1 1 N cords at plugs convenience receptacles and the point where they exit from the product Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product dueto lightning and power line surges 14 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can
9. fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 15 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 16 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 17 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e
10. led and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful intereference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Y CROSLEY PORTABLE VINYL TURNTABLE CD RADIO MODEL CR 54 CD INSTRUCTION MANUAL X A POWER SOURCE Connect the AC adaptor between the unit and the power outlet UNPACKING THE TURNTABLE 1 Carefully remove unit from it s package and take it out of the plastic bag 2 Open lid and remove black tie wrap by untwisting and gently sliding out from under tone arm 3 Remove cardboard shipper 4 Remove white protective needle cover by gently pulling towards front of unit TURNTABLE OPERATION Press the unit on by switching the POWER 13 located on the front panel to the ON position 1 Press the PHONO 2 to set the PHONO mode Set the SPEED CONTROL SWITCH 29 to desire speed 331 3 45 or 78 rpm Place the reco
11. rd on the turntable Adjust the Volume switch 21 22 set at the mid range Pull the TONE ARM 28 slightly to the right side until hear the click sound to activate the turntable Move the tone arm by hand out over the record and slowly lower it Re adjust the VOLUME control 21 22 to the desire level 6 At the end of the record the tone arm will stop automatically by the center and return to the armrest manually Accessory ADAPTER FOR 45RPM TO PLAY THE 45RPM RECORD PLACE THE ADAPTER 27 ON THE SPINDLE 26 ARON BASIC OPERATION ELECTRONIC VOLUME CONTROL a Press VOL DOWN 21 to reduce the volume the volume level will be shown in the LCD panel b Holding down the button will result in continuous decrease of the volume c Press VOL UP 22 will have an opposite result it is similar to the case of pressing VOL DOWN 21 USE THE FUNCTION BUTTON TO SELECT THE DESIRED MODE CD TOC reading display After reading display a Pressing CD 1 key to set the CD mode the TOC reading starts and will be displayed after finish b Pressing TUNER 3 key to set the tuner mode and the receiving O tuning frequency will be shown c Pressing PHONO key to set the PHONO mode ey The LINE will be displayed L IN z EQUALIZER FUNCTION Manual or Preset Equalizer can be selected by proper Jumper Setting mentioned on section 5 If Preset Equalizer is selected gt FLAT gt
12. ss at a time to adjust the frequency that you wish to receive FM STEREO BROADCAST RECEPTION STEREO display will light when a stereo broadcasting station is receiver Stereo reception AO e O U PRESETTING METHOD 20 broadcast stations of FM band and 12 stations of AM band can be stored to the preset memory Search a desired station a During tuner mode by using the auto search or manual search methods to find a desired broadcasting station or any desired frequency g bi low b Press MEMORY 10 key to Memory diepley make the channel display _ appear a oc mi ee be Choose Channel 1 c Press REPEAT PRESET key to choose the desired channel m EES pao pmr S Channel 1 presetting finish d press MEMORY 10 again then the desired station is stored in channel 1 ees Repeat steps a to d for storing the various broadcast station to other channels or modifying the present channel f To change the broadcast station of a certain channel to a different channel Example Change the 1422 kHZ broadcast station from channel 6 to channel 8 Press the REPEAT PRESET key or the numerical key to call the broadcast station of the channel that you wish to change EXAMPLE Channel 6 Before change of channel a Huy Hee 5 resetting mode H224 After change of channel Press MEMORY 10 key to the presetting mode and the channel display __ appear
13. y and operating instructions should be read before the product is operated Retain instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating Instructions shouldbe adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operationof the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase orrack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 10 Power Sour
Download Pdf Manuals
Related Search