Home

Clarion FZ709E Bluetooth Headset User Manual

1. FzoE 35 Common Operations een Mode Touch the key to switch to ADJ menu 2 Select SETTING in the menu to enter setting mode A 3 Each time you slide along the ec or touch A 1 V key the setting mode changed as following order DISP BRIGHT lt gt BEEP lt gt CODE lt gt SCREEN SAVER gt AUTO SCROLL lt gt SCROLL SPEED lt gt DIMMER lt gt BLINKING LED gt AMP CANCEL lt gt INT SWITCH gt SYSTEM CHECK H no operation is performed for more than 10 seconds ADJ mode is cancelled and the display returns to the previous mode O Setting the display brightness You can adjust the display brightness to match the angle of installation of the unit The factory default setting is 5 Adjustment level 1 to 8 Select DISP BRIGHT 9 2 Touch gt key fo enter detail setting stage 9 9 Slide along scr slider or touch A V key to adjust the value Notes e f both the dimmer and the care illumination are turned on ILLUMI ON and the adjustment value will be displayed If the dimmer is turned on and the care illumination is turned off ILLUMI OFF and the adjustment value will be displayed e f the dimmer is turned off only the adjustment value will be displayed e The display brightness level setting during dimmer and car s illumination are turned on has indepe
2. 3 wheel capacitance Scan play 3 NOMENCLATURE EE i a a a a a SE 6 motor bicycle marine boat or other special Se a thick glove may reduce the finger Repeat play Radio mode Band Frequency Preset no Names of the Keys and Their Functions EE 6 purpose vehicle is not appropriate capacitance and cannot operate the unit TT Random play USB mode Mode name Folder no Gre Sea ee Eo 2 In extreme cold the screen movement may 4 User is advised to have minimum operation Track no Playback time p y EET E E o o LE Er slow down and the screen may darken but a e z d All scan play OEL Display 8 ove on the unit while driving Drive safely Al pen ala Mode Oe ie no See AAA AAA AAA AAA AAA AAA AAA this IS normal The screen will recover when BG Playback time iPod mode 4 REMOTE GONTROL a caian 9 it returns to normal temperature BU All random play Adjust mode Previous layer Current item JE KE A o 9 BT Audio mode F ncions OF Remote Contro UNT Ee 10 Repeat Random play Telephone mode 5 OPERATIONS EE 11 Rebeat All Random bla AUX mode Basic Te e E 11 H p ay Radio Mod lee 16 INFORMATION FOR USERS Random play Giok Radio Data System Operations oooonccconinoniconocinano nana nana nana nn nono nono nn 19 CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU All Random play ock time U B OST EE 23 FACTURER WILL VOID THE WARRANTY IROQ OPET ION E 27 Bluetooth Operations Seene 31 EENEG 35 6 TROUBLESHOOTING cc
3. 9 During standby mode use the last connected mobile phone to send contacts to the unit Notes e When the COMPLETED appears add phone book is succeed e Total contacts that can be stored depend on the selected Book Type O DELETE PHONEBOOK This is a setting for user to delete one or the en tire phone numbers 0 0 Select DEL PHONEBOOK 0 9 Touch the gt key the current connected phone is displayed 0 9 Touch the ENT key to enter selection mode A 0 2 Slide along 97 slider or touch A AV key to select ALL DELETE or 1 DELETE and touch ENT key When you select ALL DELETE touch the ENT key to proceed 0 0 When you select 1 DELETE slide along scrt slider or touch A V key to select one of the desired phone number and touch ENT key 0 0 Touch the ENT key for 2 seconds to de lete O DELETE HISTORY This option used to delete the call history 0 0 Select DEL HISTORY 0 9 Touch the gt key DELETE is dis played 0 9 Touch the ENT key for 2 seconds to de lete Fz709E 33 Bluetooth Operations O BOOK TYPE The unit provides 3 types of phone book which are stored in memory The factory default setting is TYPE 3 0 0 Select BOOK TYPE 0 2 Touch the gt key to enter detail setting stage 0 9 Slide along S974 slider or touch AV V key to select the setting in sequence
4. MP3 ERROR 2 AAC format WMA AAC files The MP3 WMA AAC files are Use only properly encoded MP3 ERROR 3 improperly encoded WMA AAC files USB mode ERROR 3 The iPod contains no audio files Insert an iPod containing audio files iPod mode USB iPod Over current detection Disconnect the devices and CUR ERR reconnect If the devices are still not recognized try replacing with a different devices HUB ERR Do not support the HUB devices Do not use the HUB devices No Bluetooth device is found within Please turn on the Bluetooth device range and place the device within range of reception The device pairing information might Please manually pair and reconnect FAILED have been lost the device Device or unit is not in pairing mode Please make sure both the unit and or wrong pass key is entered device is in pairing mode and enter the correct pass key A2DP device is not connected Please manually pair and connect the A2DP device H an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your nearest service dealers BLUETOOTH 42 Fz709E 8 SPECIFICATIONS FM tuner Frequency Range 87 5 MHz to 108 MHz Usable Sensitivity 11 dBf 50 dB Quieting Sensitivity 17 dBf Alternate Channel Selectivity 75 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM tuner MW 531
5. TYPE1 TYPE 2 or TYPE 3 00 ALL MEMORY IS DELETED is dis played 0 9 Touch ENT key for 2 seconds to change setting mow t 8 MEMORY 1 250 pieces 200 pieces 100 pieces MEMORY 2 250 pieces 100 pieces 100 pieces MEMORY 3 100 pieces 100 pieces MEMORY 4 100 pieces MEMORY 5 100 pieces Note e Once setting is changed all previous stored phone book data will be cleared O RING VOL This option is used to change the ringing volume by each paired mobile phone device The factory default setting is 5 Adjustment level 1 to 10 0 0 Select RING VOL 0 2 Touch the gt key to enter detail setting stage A 0 9 Slide along 97 slider or touch A MIV key to change the ringing volume 34 Fz O AUTO ANSWER This is a setting to determine whether any in coming call will be automatically or manually answered The factory default setting is OFF 0 0 Select AUTO ANSWER 0 9 Touch the gt key to enter detail setting stage A 0 9 Slide along 97 slider or touch A WM key to select ON or OFF e ON Any incoming call is automatically answered in 5 seconds e OFF User needs to manually answer the call O AUTO CONNECT This function allows this unit to be connected au tomatically with previously connected device The factory default setting is OFF 0 0 Select AUTO CONNECT 0 9 Touch the gt key to ent
6. WMA AAC files e To prevent the accidental loss of data always back up important data on your computer e This unit does not support connections to a com puter In addition connections made through a USB hub device are also not supported e When a USB memory device is composed of two or more drives only one of the drives will be detected e USB memory devices with security functions cannot be played e The order in which tracks are recorded may dif fer depending on the USB memory device con nected the actual playback order may not be the same as that indicated on your computer s display If you continuously operate folder up down the play time keeps as 00 00 and the sound is not emitted What is MP3 MP3 is an audio compression method and clas sified into audio layer 3 of MPEG standards This audio compression method has penetrated into PC users and become a standard format This MP3 features the original audio data compres sion to about 10 percent of its initial size with a high sound quality This means that several mu sic CDs can be recorded on a USB memory de vice to allow a long listening time Depends on the USB memory device storage Capacity What is WMA WMA is the abbreviation of Windows Media Au dio an audio file format developed by Microsoft Corporation Notes e If you play a file with DRM Digital Rights Manage ment for WMA remaining ON no audio is output The
7. arrow so that it slides into the compartment 4 Replace the cover and slide in until it clicks into place A CAUTION Notes Misuse may result in rupture of the battery producing leakage of fluid and resulting in personal injury or damage to surrounding materials Always follow these safety precautions e Use only the designated battery e When replacing the battery insert properly with polarities oriented correctly e Do not subject battery to heat or dispose of in fire or water Do not attempt to disassemble the battery e Dispose of used batteries properly Insertion guide Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type FZ709E Functions of Remote Control Unit Buttons Radio SRC Switch among radio USB BT Audio AUX and Pod Switch reception Play the first track iPod menu No function band Top play Increase and decrease volume Un all modes DEL Move preset Move tracks up and down Move tracks No function channels up and Press and hold the button for 1 second or down longer Fast forward fast backward Turn mute on and off TA on and off Press and hold for 1 second or longer Switch among title display indicator display and clock display Preset scan Scan play No function No function Press and hold Press and hold the PS AS the button for 2 button for 1 second seconds or longer or longer to perform Aut
8. be performed 4 Slide along S97 slider or touch AMV key to select the category 5 There are 6 categories in the iPod music menu Playlists Artists Albums Songs Genres Composers 6 Touch lt gt key to switch between layer 7 When the track name display is showing touch the ENT key Playback will begin from the selected track in the selected category and the iPod menu will be canceled Subfolders may be displayed depending on the category In this case use the A V key to switch between subfolders then use the gt key to select the desired subfolder When the track name display is showing touch the lt key will return to the currently playing folder name display 8 Slide along S slider or touch A V key to select a track within a category O Selecting category from the iPod video menu 1 Touch and hold the IE key for 1 second or longer 2 Select to switch to music menu or video menu 3 If VIDEO is selected from the list iPod video menu categories will be displayed Note e Repeat and Random mode operations are not supported when m the iPod menu 4 Slide along 82 slider or touch AJ V key to select the category 5 The categories in the iPod video menu is de pend on the iPod During video files playback if ACC is switched off then switched on again or if iPod is discon nected playback cannot be resumed Random play cannot be selected in iPod video
9. de garantie jointe et conservez la soigneusement avec ce mode d emploi Deutsch Wir m chten Ihnen fur den Kauf dieses Clarion Produkts danken Fur optimale Leistung und Sicherheit lesen Sie bitte diese Bedienungsanleitung aufmerksam durch Heben Sie diese Anleitung auf um sie sp ter zum Nach schlagen griffbereit zu haben z B im Hand schuhfach berpr fen Sie den Inhalt mit der beiliegenden Garantiekarte Legen Sie diese Karte zum Handbu ch Italiano Grazie per aver acquistato questo prodotto Clarion Si prega di leggere questo manuale utente prima di utilizzare l impianto Una volta letto conservare il manuale in un luogo a portata di mano ad es il vano portaoggetti Verificare il contenuto della garanzia acclusa e conser varla insieme a questo manuale 2 FZ709E Nederlands Hartelijk bedankt voor de aankoop van dit Clarion product Lees a u b deze gebruiksaanwijzing compleet door alvorens dit apparaat in gebruik te nemen Bewaar deze gebruiksaanwijzing nadat u ze gelezen hebt op een gemakkelijke plaats bv in het dashboardkastje Lees wat in de bijgesloten garantiekaart staat en bewaar ze samen met deze gebruiksaanwijzing Espanol Gracias por haber adquirido este producto Clarion Lea este manual de instrucciones por entero antes de utilizar este equipo Despu s de leer el manual gu rdelo a mano por ejemplo en la guantera Compruebe el contenido de la tarje
10. is disabled when a national station such as BBC R2 is being received e The REG function ON OFF setting is valid when the AF function is ON 9 0 Select REG 9 9 Touch gt key fo enter detail setting stage 8 9 Slide along 7 slider or touch A V key to select ON or OFF 9 2 After completing settings touch the ENT key to return to the 1 selected item e ON REG in the display lights and REG function turns on e OFF REG in the display goes off and REG function turns off e Manually tuning a regional station in the same network 1 This function is valid when the AF func tion is ON and the REG function is OFF Note e This function can be used when a regional broadcast of the same network is received 2 Slide along s slider or touch A V key to call out the regional station 3 If the reception condition of the called out station is bad slide along sca slider or touch A 1 V key to selett the same number The unit receives a local station on the same network O Switching the PTY display language You can select one of 4 languages English Deutsch Svenska Francais for the PTY dis played in the display The factory default setting is English 9 0 Select LANGUAGE 9 9 Touch gt key to enter detail setting stage 9 9 Slide along sea slider or touch TA Wl V key to select desired language 9 0 After completing settings touch
11. is useful when searching for a desired station in memory Select PRESET SCAN 9 9 Touch ENT key to start scan preset chan nel When a desired station is tuned in touch the lt gt key to continue receiving that station O Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially If 6 receivable stations cannot be received a previ ously stored station remains un overwritten at the memory position 9 0 Select AUTO STORE 0 9 Touch ENT key to start performing auto store function 8 9 The stations with good reception are stored automatically to the preset channels If auto store is performed in the FM bands the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations AUTO STORE will appears in the display ADJI gt DPT ION AUTO STORE mi P CH MEMORY wu CTO 32 AUTO STORE EN P1 100 DOMH AS Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM1 exists to store individual radio sta tions in memory 1 Touch the IB key to select the desired band 2 Slide along Cl slider or touch A V key to select the desired preset station 3 Touch ENT key to recall the stored radio frequency 18 Fz Radio Data System Operations Radio Data System This unit has a built in Radio Data System de coder system that supports broadca
12. mode There is no album in the video menu Please set the language setting in the iPod to English as this unit can only display English O Pod menu ABC search This function searches the subfolders for desired alphabetical letters A 1 During iPod menu slide along 97 slider or touch A MIV key and select the desired category 2 Touch gt key Subfolders maybe displayed depending on the categary You can slide along scr slider or touch A V key to switch between the subfolders and use the gt key to enter the next subfolder layer 3 Touch the 2 key for 1 second or longer A small window for alphabet selection will be displayed X 4 Select the alphabet by slide along S F slider or touch A Iw key and touch ENT key to perform search 5 SEARCHING will be displayed FzzoE 29 iPod Operations O About title display This unit supports the display of title information transmitted from a connected iPod e Character code information is UTF 8 display able characters include English alphanumerics some symbols and some umlaut characters e Unsupported characters will be replaced by asterisks O Output form This function is to select digital output or ana log output from this unit This setting is for video playback via iPod 5G When you connect other than iPod 5G or when you play only audio files please set this setting to DIGITAL If you
13. provided Bluetooth Operations Notes e Make sure Bluetooth setting on the mobile phone is turned on during connection request e F indicator will appear if Bluetooth device is connected e Tull and AMD indicator will only appear if sup ported by the mobile phone O DELETE This is a setting for user to delete one of the paired devices from the list In TEL OPTION 0 0 Select DELETE 0 9 Touch the gt key to view the paired mobile phones list 0 9 Slide along lt slider or touch AN V key to choose one of the 5 mobile phones 0 9 Touch the ENT key DELETED is dis played 0 9 Touch the ENT key for 2 seconds to delete the paired device In BT Ed OPTION 9 0 Select DELETE 9 92 Touch the gt key DELETED is dis played 9 9 Touch the ENT key for 2 seconds to delete the paired device Note e After a device has been deleted paired device will not automatically rearrange in the list O DISCONNECT This option is used to disconnect the currently connected device 0 0 Select DISCONNECT Touch the gt key DISCONNECT is dis played Touch the ENT key for 2 seconds to discon nect the connected device O ADD PHONEBOOK This option is used to add contacts from the mo bile phone 0 0 Select ADD PHONEBOOK Touch the ENT key to enter standby mode STAND BY is blinking 0
14. return to the 1 selected item O Adjusting the mid This adjustment can be performed only when the BEAT EQ is set to CUSTOM 9 0 Select MID 9 9 Touch gt key to enter detail setting stage AD J gt SOUND ASS mio TREBLE 9 9 Touch lt gt key to select Gain G center frequency F or Q factor Q Slide along sche slider or touch A AV key to adjust the value The factory default setting G 0 Adjustment range 7 to 7 F 500Hz Adjustment range 500 1k 2k Q 1 0 Adjustment range 0 7 1 0 1 4 2 0 FZ709E 13 Basic Operations SOUND gt MID CTO 32 Fri TD a 4 ESOO M let e SOUND gt MID CTO 32 Fri I 6 4 ESOO 0 r mm e E 2 SOUNDSMIO CTOL Ge mid 4 6500 WO r mm gt 9 0 After completing settings touch the ENT key to return to the 1 selected item O Adjusting the treble This adjustment can be performed only when the BEAT EQ is set to CUSTOM 9 0 Select TREBLE 9 9 Touch gt key to enter detail setting stage AD J gt SOUND Mmi I TREBLE DOE 1 9 9 Touch lt gt key to select Gain G center frequency F or Q factor Q 9 9 Slide along c slider or touch A V key to adjust the value The factory default setting G 0 Adjustment range 7 to 7 F 10kHz Adjustment range 5k 10k 15k Q 1 0 Adjustment ran
15. the ENT key to return to the 1 selected item 22 Fz7O9 O Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory If the number of TP can be received less than 6 broadcast stations already stored in memory and left without being overwrit ten As TH lit in the display select AUTO STORE 8 9 Touch ENT key to start performing auto store function The stations with good reception are stored automatically to the preset channels Even if you select FM1 or FM2 a TP station is stored into memory for FM3 USB Operations USB memory device operation About USB memory e USBis an acronym for Universal Serial Bus and refers to an external bus standard supporting data transfer rates of 12 Mbps e This unit is compatible with USB 1 1 2 0 with maximum data transfer rates of 12 Mbps e USB memory devices that can be played by connecting to the unit s USB cable are limited to those recognized as USB mass storage class devices operation is not guaranteed with all USB memory devices Devices compatible with USB Mass Storage Class can be used merely by connecting to the host device without need for special drivers or application software e Consult the manufacturer of your USB memory device for information regarding whether it is supported by USB Mass Storage Class standards e Audio files playable on this unit are limited to MP3
16. using single byte letters If you add a file extension other than specified or forget to add the file extension the file cannot be played 2 Files without MP3 WMA AAC data will not play The indication NO FILE appears in the play time display if you attempt to play files without MP3 WMA AAC data When VBR files are played the play time display may differ the play location When MP3 WMA AAC files are played a little no sound part is caused between tunes 24 FZ709E O Logical format File system 1 When writing MP3 WMA AAC file please select FAT12 FAT16 or FAT32 as the file system format Normal play may not be possible if the files are recorded on another format 2 The folder name and file name can be dis played as the title during MP3 WMA AAC play but the title must be within 64 single byte alphabetical letters and numerals including an extension 3 Do not affix a name to a file inside a folder having the same name Note e File names in small letters with less than 8 charac ters not including file extension will be displayed in capital letters O Folder structure 1 A USB with a folder having more than 8 hier archical levels will be impossible O Number of files or folders 1 Up to 255 files per folder can be recognized Up to 512 folders can be recognized and up to total of 130560 files can played 2 Tracks are played in the order that they were recorded onto a USB T
17. well The external audio device may in Pause status Some Bluetooth audio devices might not support AVRCP There might be connection links broken between the devices The device might not support audio streaming Reconnect A2DP AVRCP Audio streaming profiles from the phone again after telephone interrupt Disconnect and pair the device again If your phone is facing this problem please do not use your phone while audio streaming Check whether both device and main unit are in play status Change the status in the device if necessary If problem persists please power off and on the main unit or the device Please delete pairing information on both device and main unit and start re pairing Please check your phone whether it supports Bluetooth audio streaming or visit www clarion com for your phone compatibility Advanced Audio Distribution Profile A2DP is used for Bluetooth audio streaming support Audio Video Remote Control Profile AVRCP is used for controlling audio streaming playback 40 FZ709E TROUBLESHOOTING TI E Tse ae After pairing car stereo Bluetooth connection is not Use your phone to manually connect is not able to receive and established yet or select from the unit make calls Normally it will take several seconds to establish the connection after me s pairing and perform pairing again Always make sure pairing information on Some phones will not
18. 8 2 Touch the ENT key TRACK RANDOM will be displayed for 2 seconds 900 RJ AR lights in the display O All random play This function allows you to play all the tracks of all the folders recorded on an USB in a random order Select RANDOM 8 9 Touch gt key fo enter detail setting stage 9 9 Slide along oct slider or touch A V key to select ALL 9 9 Touch the ENT key ALL RANDOM will be displayed for 2 seconds EAH lights in the display USB Operations O To cancel trick play 9 0 Select TRICK OFF 9 9 Touch ENT key to cancel trick play 9 9 Display will return to playback display Folder Select This function allows you to select a folder con taining MP3 WMA AAC files and start playing from the first track in the folder 1 Slide along scr slider or touch AMV key Touch A key to move the next folder Touch V key to move the previous folder Touch A key while in the final folder will shift to the first folder Folder without a MP3 WMA AAC file is not selectable iPod Operations This section describes operations when connect ed to an Apple iPod via the USB slot Notes e See the iPod Owner s Manual for details regarding operation conditions e The unit will not operate or may operate improperly with unsupported versions e For alist of compatible Apple iPod unit with the this model please contact your Clarion d
19. BOOK 0 2 Touch the gt key to enter the contact name mode In this case slide along scr slider or touch A ILV key to select the desired contact name 0 9 When the contact name is displayed touch the gt key to view details 00 When contact name or contact details is displayed touch the ENT key to call the mobile phone number O Received Dialled Missed Call History You can browse and call from Received Dialled Missed Call History 0 0 Select HISTORY 0 2 Touch the gt key to enter the contact name mode In this case slide along scr slider or touch A V key to select th desired contact name When the contact name is displayed touch the gt key to view details When contact name or contact details is displayed touch the ENT key to call the mobile phone number Note e Only calls after phone connected with this unit will be displayed in the history list There is no synchro nization of history calls between connected phone and this unit O Redial a Call You can call a last dialed number of the phone 0 0 Select REDIAL 0 9 Touch the ENT key to redial the last dialed number of the phone O Dial Number Call Outgoing call can be made by entering telephone numbers Telephone number uses 0 1 2 3 4 5 6 7 8 9 and Fz709e 31 Bluetooth Operations 0 0 Select DIAL NUMBER 0 9 Touch the gt key to ent
20. Clarion Co Ltd All Rights Reserved Copyright O 2009 Clarion Co Ltd Printed in Malaysia Imprim en Malaisie Gedruckt in Malaysia Stampato in Malaysia Gedrukt in Maleisi Impreso en Malasia Tryckt i Malaysia Impresso na Malasia PE 8501E 280 8841 00 Clarion Owner s manual Mode d emploi Bedienungsanleitung Istruzioni per l uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instru es FZ 09E Bluetooth USB MP3 WMA AAC RECEIVER RECEPTEUR Bluetooth USB MP3 WMA AAC Bluetooth USB MP3 WMA AAC EMPFANGER RICEVITORE Bluetooth USB MP3 WMA AAC Bluetooth USB MP3 WMA AAC RECEIVER RECEPTOR DE Bluetooth USB MP3 WMA AAC Bluetooth USB MP3 WMA AAC RECEIVER RECEPTOR DE Bluetooth USB MP3 WMA AAC sreSueJ Mi MAA Fetter GIEL English Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual Francais Nous vous remercions pour lachat de ce produit Clarion Veuillez lire ce mode d emploi dans son int gralite avant d utiliser cet equipement Apres l avoir lu veillez a conserver ce mode d emploi dans un endroit pratique par ex boite a gants V rifiez le contenu de la carte
21. DJ menu Select OPTION in the menu to enter the BT Ed OPTION mode Slide along the Sc slider or touch A V key the BT Bl OPTION mode changed as following order PAIRING lt gt DELETE lt gt PASS KEY lt gt ADDRESS lt gt BT NAME lt gt VERSION lt gt PAIRING O PAIRING This option is used to perform Bluetooth pairing with the mobile phone and audio Up to a maximum of 5 mobile phones and an au dio device can be paired 0 0 Select PAIRING 0 9 Touch the gt key to enter detail setting stage 0 9 Slide along 7 slider or touch A V key to select TELEPHONE or AUDIO and then touch the ENT key 9 0 When you select TELEPHONE slide along IC slider or touch A 1 V key to select MEMORY 1 to MEMORY 5 Touch the ENT key to enter Pairing mode Notes e Activate Pairing mode will disconnect all currently connected devices e This unit will not connect to previously connected device after cancel the Pairing mode O SELECT This is a setting for user to select one of the paired mobile phones 0 0 Select SELECT 0 9 Touch the gt key to view the paired mobile phones list 0 9 Slide along 927 slider or touch AMV key to choose one of the 5 mobile phones Touch the ENT key to connect Connected device will be able to use all the functional ities
22. E INPUT 1111 If successfully delete the registered code DELETED will be displayed for 2 seconds and back to 1 item SET CODE CTOL Ge DELETED If unsuccessfully delete the registered code FAILED will be displayed for 2 seconds and back to the INPUT 0000 display AE A CTOL 32 PAILED e Turning the screen saver function on or off This unit is provided with the screen saver func tion which allows you to show various kinds of patterns in the operation status indication area of the display in a random order You can turn on or off this function If the key operation is performed with the screen saver function on the opera tion display corresponding to the key operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is ON Select SCREEN SAVER 8 9 Touch gt key fo enter detail setting stage 9 9 Slide along 27 slider or touch AV key to select ON or OFF O Setting the method for title scroll Set how to scroll in MP3 WMA AAC title The factory default setting is ON Select AUTO SCROLL 8 9 Touch gt key fo enter detail setting stage 8 9 Slide along 957 slider or touch A wl key to select ON or OFF e ON To scroll automatically e OFF To scroll just 1 time O Setting the scroll speed This function allows you to ad
23. TIST TRACK gt FOLDER TRACK gt FOLDER TITLE gt ALBUM TRACK FZ709E 11 Basic Operations x Ka 2 Once selected the preferred title display becomes the display default When a function adjustment such as volume is made the screen will momen tarily switch to that function s display then revert back to the preferred title display several seconds after the adjustment If the key operation is performed with the screen saver function on the operation display corre sponding to the key operation is shown for about 30 seconds and the display returns to the screen saver display For details refer to the subsection Turning the screen saver function on or off in section Common Operations Switching the display layout 1 Touch the _E2 key for more than 1 second to switch display layout Each time you touch the key for more than 1 second the display layout switches in the following order Title mode gt Indicator mode gt Clock Example iPod Pod gt 8 1230 00 00 ETOU 32 pm ll jo Feet EAbcdefahi3kl EET AECHE Tm Title mode reyes 1234 CTOL 32 dl Ad 2 LB oe SKIe 00 00 geen ns Rara Indicator mode y Clock When CT data is not received Thy D ap pears in the display for Title mode and Indicator mode while appears in the display for Clock mode FZ709E Sound adjustments You can adjust a sound effect or tone quality to yo
24. This function allows you to locate and play the first 10 seconds of the first track of all the fold ers 9 0 Select SCAN 9 9 Touch gt key to enter detail setting stage 9 9 Slide along scr slider or touch AV V key to select ALL 9 2 Touch the ENT key ALL SCAN will be displayed for 2 seconds 9 9 During scan METH will keep blinking All scan play starts from the first track of next folder 26 Fz O Repeat play This function allows you to play the current track repeatedly Select REPEAT 8 9 Touch gt key jo enter detail setting stage 8 9 Slide along ec slider or touch A 11 V key to select TRACK 9 9 Touch the ENT key TRACK REPEAT will be displayed for 2 seconds 00 WTS lights in the display O All repeat play This function allows you to play all tracks in the MP3 WMA AAC current folder repeatedly 9 0 Select REPEAT 8 9 Touch gt key fo enter detail setting stage Slide along scr slider or touch A A V key to select ALL Touch the ENT key ALL REPEAT will be displayed for 2 seconds 90 FINITE lights in the display O Random play This function allows you to play all tracks of cur rent folder in a random order 8 0 Select RANDOM 8 9 Touch gt key jo enter detail setting stage 9 9 Slide along lt slider or touch A V key to select TRACK
25. X OP TION mode 3 Select AUX SENSE and touch gt key to enter detail setting stage 4 Slide along SF slider or touch A V key to select HIGH MID or LOW Note e When AUX mode is selected AUX IN sensitivity can be set Power does not turn on Fuse is blown Replace with a fuse of the same amperage No sound is produced If the fuse blows again consult your nearest service dealers Incorrect wiring Consult your nearest service dealers No sound output when Power antenna lead is Turn the unit off operating the unit with shorted to ground or Remove all wires attached to the power amplifiers or power excessive current is antenna lead Check each wire for a possible the amplifiers or power antenna Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required No sound heard The speaker protection Turn down sound volume Function can circuit is operating also be restored by turning the power off and on again Speaker volume is reduced automatically when the speaker protection circuit operates If the sound is muted again consult our service department a aa EECH No sound heard The device contains no Record MP3 WMA AAC files properly to the MP3 WMA AAC files device The files are no
26. a connected E memo ry device Touch the J key to switch to the Source menu and Select the USB When USB memory device is selected playback except DRM files will begin from the location at which playback was previously stopped When a USB memory device is connected the USB mode will be displayed When a USB memory device is disconnected and then reconnected playback will begin from the previous position where playback is stopped When a USB memory device is disconnected and then a different USB memory device is connected playback will begin from the first file recorded on the device To stop play 1 Touch the ES key and switch the function to a source other than the USB memory device A CAUTION Do not remove the USB memory device when the USB mode is selected since it may result in loss or damage to data on the USB memory device Always backup and save important data on your computer 2 Remove the USB memory device from the USB slot Pausing play 1 Touchthe gt key to pause play PAUSE appears in the display 2 To resume play touch the be or Key again Selecting a track e Track up 1 Touch the gt key to move to the beginning of the next track 2 Each time the gt key is touched playback proceeds to another track in the advancing direction e Track down 1 Touch the lt key to move to the beginning of the current track 2 Touch th
27. and MIMI indicator blinks for 5 seconds and go to next track e Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries e To disable DRM Digital Rights Management 1 When using Windows Media Player 9 10 11 click on TOOL gt OPTIONS gt MUSIC RE CORD tab then under Recording settings un click the check box for RECORD PROTECTED MUSIC Then reconstruct files Personally constructed WMA files are used at your own responsibility Fz79E 23 USB Operations What is AAC e AAC is an acronym for Advanced Audio Coding and refers to the audio compression method used with video compression standards MPEG 2 and MPEG 4 e AAC files composed with the following condi tions can be played e AAC files encoded with Tunes e Tunes Ver 7 0 or earlier e File extension m4a M4A e Tracks purchased at an Tunes Store and copyright protected files cannot be played e When playing AAC files that include image data additional time may be required before playback begins e Files may not play properly depending on the Tunes version under which an AAC file is en coded Precautions when creating MP3 WMA AAC file O Usable sampling rates and bit rates See USB page 43 for details O File extensions 1 Always add a file extension MP3 WMA or MAAT to MP3 WMA or AAC file by
28. at the Radio Data System broadcast station being received has traffic announcement programmes O Setting the TA standby mode If you touch the THI key when only TF is lit in the display TF and TA light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast When a traf fic announcement broadcast starts TRA INFO appears in the display If you touch the TH key while a traffic announcement broadcast is being received the traffic announcement broadcast re ception is cancelled and the unit goes into the TA standby mode O Cancelling the TA standby mode As TP and T lit in the display touch the TH key The T in the display goes off and the TA standby mode is cancelled x If TF is not lit touch the TH key searches for a TP station O Searching for a TP station When TF is not lit if you touch the TH key TA in the display lights and the unit automatically re ceives a TP station Note e f a TP station is not received the unit continues the search operation Touch TH key again goes off TH in the display and stops TP station searching Emergency broadcast H an emergency broadcast is received all the Function mode operations are stopped ALARM appears in the display and the emergency broad cast can be heard O Cancelling an emergency broadcast If you touch the 2 key emergency broadcast reception is cancelled Fzoe 19 Radio Data Syst
29. automatic both device and main unit have connect after pairing been deleted before starting a new pairing activity Power off and on the car stereo If the problem persists please visit www clarion com for your phone compatibility Car stereo is connected to other Disconnect the previous device and device reconnect current device Unable to reconnect to The device pairing information may Perform the above measure car stereo using phone have been deleted from the unit There is no sound output Incoming call was answered too Please use your phone to transfer when incoming call is quickly before you hear the ringing the audio back to the phone for the answered tone This can cause the audio not current ongoing call properly transferred to the main unit Kindly answer the call only when you by some phones hear a ringing tone next time If the problem persists please reconnect the phone or create new pairing before the next incoming call ld c O Q oO There is no sound output Bluetooth communication link is Please disconnect the phone and during conversation lost reconnect If the problem persists please create new pairing for both phone and main unit Cannot operate the No response from mobile phone Turn off and on the mobile phone handsfree function properly FzoE 41 7 ERROR DISPLAYS orar e JO sane OO The files are not proper MP3 WMA Use only properly encoded
30. c cccccecceeceeee cece eeeeeeeeeeesaeeeeeeeeeeeeeaeeeeneeeeeeeeeeeeeeeeesaneeneeeenes 39 Operation status 7 ERROR DISPLAYS 42 indication 8 SPECIFICATIONS 0er 43 My gt v t BABES MP ROS mea 9 ESTA MANU mea AF REG TA TF PTY hi 6 BEG Tall O00 M esa SMPOd Eeer ID3 TAG Function displa Tull Mobile phone s network signal d D P Ay indication FZ 7OQ9E Clarion UI AAL MPA MP3 indication E ID B015518 WE WMA indication ID E phone s battery 12V 15A max AAC AAC indication Gegen MM 531 1602kH C Bluetooth connection indication MW 531 1602kHz FM UKW 87 5 108MHz EMCTYPE 1043407A a WW e A BBE MP Minimized Polynomial Non Linear Saturation Process improves digitally compressed sound such as MP3 by ource Icon Sound mode Microsoft Corporation and cannot be used or distributed restoring and enhancing the harmonics lost through compression BBE MP works by regenerating harmonics from the l i E MAGNA BASS EX indication source material effectively recovering warmth details and nuance Radio mode a BEG Beat EQ indication Manufactured under license from BBE Sound Inc Kaf Stereo indication MON MUTE indication Licensed by BBE Sound Inc under one or more of the following US patents 5510752 5736897 BBE and BBE symbol MAA Manual indication are registered trademarks of BBE Sound Inc AS l Aula SE DEER Radio Data System Made for iPod means that an electronic accessory has been designed to connect specifi
31. cally to iPod and has been ELN Scan indication AF _ Alternative frequency indication certified by the developer to meet Apple performance standards REG Regional indication Y EE Pa Pee Ser Ge Se Ree R this ce y Eed de Wi Sie and regulatory standards o iPod and iTunes are trademarks of Apple Inc registered in the U S and other countries TA Traffic announcement indication Sang ane MADE IN MALAYSIA TR _ Traffic programme indication Bottom View of Source Unit Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the PTY Programme type indication United States and or other countries e The use of apparatus in moderate climates The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Clarion Co Ltd O E L Screen is under license Other trademarks and trade names are those of their respective owners The organic electro luminescence display OEL Display of this product is made by high technology basis However it is possible that there might be part of the pixels which is always lighting or not lightning Sometimes unevenness of color and brightness might be occurred depend on the point of view to watch in a characteristic B EE P l e sure to unfold and read the next page Veuillez d plier et vous r f rer a la page suivante EE EECHER alsplayed reguariy to prevent OEL Display burn in Bitte ausbreiten und die
32. e e Dial the selected phone number thorugh call method vou slider e Adjust the volume A cl slider e Select a station while in the Radio mode e Select the folder while in the USB mode e End a call or reject an incoming call e This key is used to make various settings USB PORT e USB memory device insertion port at rear panel AUX input e The input jack for connecting an external device at rear panel Slider s Key Operation E Slide Touch amp hold slider will increase volume con tinuously Touch and release once will increase the volume 1 step Touch amp hold slider will decrease volume con tinuously Touch and release once will decrease the volume 1 step Touch hold A will to scroll up items continu ously Touch and release A once will scroll up items 1 step Touch 4 hold V will to scroll down items continu ously Touch and release V once will scroll down items 1 step FZ709E 7 4 REMOTE CONTROL SRC a Y MUTE TA PS AS Inserting the Battery clarion WIRELESS REMOTE CONTROLLER Signal transmitter 1 Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration 2 Insert the battery CR2025 into the insertion guides with the printed side facing upwards 3 Press the battery in the direction indicated by the
33. e gt key the unit s name appears in the display O VERSION This will display the software version of the Bluetooth 0 0 Select VERSION 0 2 Touch the gt key the Bluetooth version appears in the display Common Operations Security code This unit can deter theft by checking registered security code if security code is registered The security code is registered in the Adjustment mode CODE item For first time installation no security code is re quired If security code is registered changing or discon necting the vehicle battery will cause the security code input to be requested for activation INPUT 0000 will be displayed and 0000 is blinking CODE INPUT OCI e A 1 Slide along S 7 slider or touch A1 V key to choose 1 6 to input the security code After input first digit 0000 will stop blinking 2 Touch gt key to go on with the next digit CODE INPUT 100 3 Touch gt key to confirm during finish input the 4 security code ied 1111 e INPUT 4 Successful password input will power ON the unit A CAUTION If entered code is wrong willbe displayed for a given period during which no operation can be performed After the locking peroid INPUT 0000 will be displayed again For mistakes less than 7 times the locking time will be 15 seconds from 7 time onwards the locking time will be 15 minutes
34. e lt key twice to move to the begin ning of the previous track Fast forward fast backward e Fast forward Touch and hold the gt key for 1 second or lon ger e Fast backward Touch and hold the lt key for 1 second or lon ger Top function Touch the I key for 1 second or longer then the USB memory device will start playing the first track of current folder Fz79E 25 USB Operations Other various play functions USB OPTION During USB mode touch the key to switch to ADJ menu Select OPTION in the menu to enter USB Option mode 6 Slide along Y slider or touch AV key the USB Option mode changed as following order SCAN gt REPEAT gt RANDOM lt gt SCAN Note e During trick play TRICK OFF will be appeared before SCAN item O Scan play This function allows you to locate and play the first 10 seconds of all the tracks in current folder 9 0 Select SCAN 9 9 Touch gt key Jo enter detail setting stage 9 9 Slide along S slider or touch A 1 V key to select TRACK 9 0 Touch the ENT key TRACK SCAN will be displayed for 2 seconds 9 9 During scan WANE will keep blinking Scan play starts from the next track after the track currently being played Scan play will proceed to next folder after all the tracks in the current folder have been scanned O All scan play
35. ealer or www clarion com Connecting an iPod When an iPod is connected to the USB slot Shuffle set on the iPod will become as follows e Shuffle Albums play gt Random play e Shuffle Songs play gt All random play The iPod have iPod menu which can toggle with Play mode by touching the lj key for 1 second or longer If iPod supports video capability the following screen will be displayed first before switching to the iPod menu MUS I C7 JV I DEQ MUSIC am Touch ENT key to enter music menu or video menu Select iPod mode 1 Connect your iPod to the USB connector The system will automatically detect the connected device and change to the USB mode iPod mode and start playback after a while O When an iPod is already connected Touch the key to switch to the source menu 2 Touch the USB to select the iPod mode The system changes to the USB mode iPod mode and starts playback from the previous position i FZ709E 27 Pod Operations Note e The following operations in Play mode operate the same as in USB mode Track selection lt gt x Fast forward fast backward lt gt Pause gt MUTE ENT See USB Operations page 23 for details Other various play functions in Play mode Notes e These functions are not supported when in the iPod menu e The Random function set on the iPod remains the same after at
36. elect BALANCE 9 9 Touch gt key to enter detail setting stage 0 9 Slide along S2 slider or touch AMV key to adjust the balance of the right and left speakers The factory default setting is CENTER Adjustment range RIGHT 12 to LEFT 12 9 9 After completing settings touch the ENT key to return to the 1 selected item O Adjusting the fader 8 0 Select FADER 0 9 Touch gt key to enter detail setting stage 8 9 Slide along scr slider or touch A V key to adjust the balance of the rear and front speakers The factory default setting is CENTER Adjustment range FRONT 12 to REAR 12 9 0 After completing settings touch the ENT key to return to the 1 selected item O Adjusting the M BEX 9 0 Select M BEX Touch gt key to enter detail setting stage 9 9 Slide along 97 slider or touch AMV key to turn on or turn off the MAGNA BASS EXTEND effect The factory default setting is OFF Adjustment range ON OFF After completing settings touch the ENT key to return to the 1 selected item O Adjusting the high pass filter Select HPF 8 9 Touch gt key to enter detail setting stage Slide along soe slider or touch AMV key to select the setting in sequence 60 lt gt 90 lt gt 120 lt gt THROUGH The factory default setting is THROUGH x This is suppo
37. em Operations Volume setting of TA emergency broadcast ALARM and PTY The volume for TA ALARM and PTY interrupts can be set during TA ALARM or PTY interrupt The factory default setting for this volume is VOL 15 During a TA ALARM or PTY interrupt slide the slider to set the volume to the desired level 0 to 33 When the TA ALARM or PTY interrupt ends the volume returns to the level it had before the inter rupt Radio Data System Adjustment mode Radio Data System function You need to enter the TUNER OPTION to per form the Radio Data System function TUNER OPTION During Tuner mode touch the 2 key to switch to ADJ menu Select OPTION in the menu to enter TUNER OPTION mode 6 Slide along scr slider or touch A V key the TUNER OPTION mode changed as following order P CH MEMORY gt PTY lt gt PTY SELECT lt gt AF lt gt REG lt gt LANGUAGE lt gt PRESET SCAN lt gt AUTO STORE gt P CH MEMORY Notes e Item in bracket PTY PTY SELECT AF REG are called Radio Data System Adjustment mode e PTY SELECT only available when PTY is on e REG only available when AP is on 20 Coop PTY This function enables you to listen to a broadcast of the selected programme type even if the unit is on a Function mode other than radio Some countries do not yet ha
38. enna sida f r att kunna se figurerna ver bilstereons framsida medan du l ser de olika kapitlen Nota Certifique se de abrir esta pagina e consulte os diagramas frontais conforme realiza a leitura de cada capitulo SN FZ709E 3 NOMENCLATURE Note e Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 5 Names of the Keys and Their Functions e Touch and hold the key for 1 second or longer to turn off the power e Switch to Source menu TH key e Touch the key to set the TA Traffic Announcement standby mode key e Switch to ADJ menu 2 key DISP e Switch Title display e Touch and hold the key for 1 second or longer to switch the display layout Title mode gt Indicator mode gt Clock lt 1 gt key e Seek a station while in the Radio mode e Select a track while in the USB mode e Touch and hold the key for 1 second or longer to enter the Fast forward or Fast backward mode while in USB mode E key e Switch the band or seek tuning or manual tuning while in the Radio mode e Switch to List Search or Top folder while in the USB mode e Switch between last menu level and Play display or Top iPod menu while in the iPod mode 6 rop S key e Play or pause a track while in the USB mode e Toggle Mute on off while in the Radio mode e Touch and hold the key for 2 seconds or longer to memory new value during setting mod
39. equencies if the lt key is touched the station is sought in the direction of lower frequencies Radio Mode Operations O DX SEEK When the gt key is touched search will be per forming in the direction of higher frequencies When the lt key is touched search will be per formed in the direction of lower frequencies When seek tuning starts DX SEEK appears in the display O LOCAL SEEK If the key is touched and held in position for 1 second or longer local seek tuning will be en abled Broadcast stations with good reception sensitivity are selected When local seeking starts LO SEEK appears in the display Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step Tuning mode the fre quency changes one step at a time In the Quick Tuning mode you can quickly tune the desired frequency 1 Touch the IB key and select the desired band FM or AM If MANI is not lit in the display touch and hold the IB key for 1 second or longer MARL is lit in the display and manual tuning is now avail able 2 Tune into a station O Quick tuning Touch and hold the lt gt key for 1 second or longer to begin station tuning O Step tuning Touch the lt gt key to perform manual tun ing H no operation is performed for more than 7 sec onds manual tuning is cancelled and the display returns to the previous mode Radio func
40. er detail setting stage A 0 9 Slide along 97 slider or touch AMV key to select ON or OFF o ON Automatic connection is enabled o OFF Automatic connection is disabled Note e f user disconnect the device from this unit the unit will not try to connect to the device automatically even if the AUTO CONNECT is set to ON Bluetooth Operations O PASS KEY User can set new 4 digits of pass key that range from O to 9 for pairing authentication security This new pass key will be used for subsequent pairing mode with other Bluetooth device The factory default setting is 1234 0 0 Select PASS KEY 0 9 Touch the gt key to enter detail setting stage 0 9 Default pass key is displayed Touch ENT key to change the setting 9 2 Touch lt or gt key to move the cursor 0 0 Slide along 927 slider or touch A LV key to select the desired digits 0 0 Touch ENT key for 2 seconds to store in memory 0 0 MEMORY is displayed Note e Both Bluetooth device and this unit must have the same pass key in order for pairing to be success ful O ADDRESS This will hold the unique Bluetooth address The address is 12 figures 0 0 Select ADDRESS 0 92 Touch the gt key the Bluetooth address appears in the display O BT NAME This will hold the unit s name for pairing pur pose 0 0 Select BT NAME 0 9 Touch th
41. er the dial mode 0 9 Touch the lt or gt key to move the cur sor a 0 0 Slide along 97 slider or touch Al V key to select the numbers 0 9 Touch the ENT key to call the mobile phone number O Answering a call 1 You can answer an incoming call by touching any key except slide along the s ru slider y O End a call You can reject an incoming call or end an on going call by sliding down the s h slider V h TEL OPTION A Slide along the S97 slider or touch A V key the TEL OPTION mode changed as following order PAIRING Y SELECT SO DELETE lt gt DISCONNECT lt gt ADD PHONEBOOK gt DEL PHONEBOOK gt DEL HISTORY lt gt BOOK TYPE Y RING VOL lt gt AUTO ANSWER lt gt AUTO CONNECT gt PASS KEY lt gt ADDRESS lt gt BT NAME gt VERSION Y PAIRING Notes e When user pairing at first time BOOK TYPE is displayed before PAIRING By select book type once it appear later in the option list e The DISCONNECT will only appear if paired mobile phone is connected e The ADD PHONEBOOK DEL PHONE BOOK and DEL HISTORY will only appear if paired mobile phone is connected and selected Book Type has reserved memory for storing contacts 32 FZ BT Ei OPTION During BT JI mode touch the key to switch to A
42. eral Power Supply Voltage 12 V DC 10 8 V to 15 6 V allowable negative ground Current Consumption Less than 15A Speaker Impedance 4 Q 4 Q to 8 Q allowable Weight 1 93 Ib 0 875 kg Dimensions 178 mm Width X 50 mm Height X 154 2 mm Depth Fz79E 43 44 SPECIFICATIONS 178 mm 50 mm III gt E E N E S GN Y Es Aca I Notes e Specifications comply with JEITA Standards e Specifications and design are subject to change without notice for further improvement e Please make sure when connecting external power amplifier that you properly to the car chassis ground the amplifier e f this is not done severe damage to the source unit may happen FZ709E
43. ge 0 7 1 0 1 4 2 0 14 FZ709E SOUND gt TREBLE Crow 32 TREBALE SU amp Sk WO d m CS SOUND gt TREBLE Crow 32 TREBALE Cide amp Sk WO d Pop E SOUNDS TREBLE CTOLU Se TREBALE SU E Sk UD o mm et 8 0 After completing settings touch the ENT key to return to the 1 selected item O Setting the BBE MP Sound Enhancement and Restoration for compressed audio files BBE MP Minimized Polynomial Non Linear Sat uration Process improves digitally compressed sound such as MP3 by restoring and enhancing the harmonics lost through compression BBE MP works by regenerating harmonics from the source material effectively recovering warmth detail and nuance This function is effective for the audio files in the USB iPod mode but it is ineffective for the video in the USB iPod mode Select BBE MP 9 9 Touch gt key to enter detail setting stage 9 9 Slide along SE slider or touch A AV key to select the value in sequence of OFF Es ON The factory default setting is OFF Basic Operations When ON is set 9 9 0 Touch gt key to enter detail setting stage D 90 99 Slide along S97 slider or touch AV key to select the value in sequence of HIGH lt MID lt LOW The factory default setting is MID 9 0 After completing settings touch the ENT key to return to the 1 selected item O Adjusting the balance 9 0 S
44. hen BASS BOOST IMPACT EXCITE is set BASS BOOST IMPACT FEXCITE will appear after the BEAT EQ item in the sound Adjust ment mode Select the item and touch gt key to enter detail setting sjage 9 9 9 Slide along S 7 slider or touch AMV key to adjust the setting in the range of 3 to 3 The factory default setting is 0 After completing settings touch the ENT key to return to the 1 selected item When CUSTOM is set 8 9 0 Slide along Ser slider or touch AV key to select the BASS MID or TRE BLE mode to adjust O Adjusting the bass This adjustment can be performed only when the BEAT EQ is set to CUSTOM 9 0 Select BASS 9 9 Touch gt key to enter detail setting stage AD J gt SOUNO Genre E BASS mip 9 9 Touch lt gt key to select Gain G center frequency F or Q factor Q K Slide along scr slider or touch AVI V key to adjust the value The factory default setting G 0 Adjustment range 7 to 7 F 50Hz Adjustment range 50 100 200 Q 1 0 Adjustment range 0 7 1 0 1 4 2 0 SOUNDSBASS CTDL e HA KK CAF S0 2 gt MO d am SOUNDSABARSS CTO e HA Sr E SO WO d Fm S ZS SOUNDSABARSS Tc TOU 32 HA CC MO d mm a Ier D Ai 9 0 After completing settings touch the ENT key to
45. ion of higher frequencies touch the lt key to search in the direction of lower frequencies 9 0 PTY SEEK is displayed If no station with the selected PTY broadcast can be received the unit returns to the previous selected PTY in the PTY list H station is found PTY name and PS name will be displayed for 7 seconds before back to PTY list O AF function The AF function switches to a different frequency on the same network in order to maintain opti mum reception The factory default setting is ON 9 0 Select AP 8 9 Touch gt key Jo enter detail setting stage 9 9 Slide along scr slider or touch Al V key to select ON or OFF 9 9 After completing settings touch the ENT key to return to the 1 selected item e ON AF in the display lights and AF function turns on e OFF AF in the display goes off and AF function turns off Ifthe reception of the current broadcast sta tion deteriorates SEARCH appears in the display and the radio searches for the same programme on another frequency REG Regional programme function When the REG function is ON the optimum re gional station can be received When this func tion is OFF if the regional station area switches as you drive a regional station for that region is received The factory default setting is OFF rant 21 Radio Data System Operations Notes e This function
46. just the speed of the title scroll The factory default setting is 3 Select SCROLL SPEED 8 9 Touch gt key Jo enter detail setting stage Slide along or slider or touch AV key to adjust the speed value Parameter range 1 5 Fz700E 37 Common Operations O Setting the dimmer control You can set the dimmer control ON or OFF The factory default setting is ON 8 0 Select DIMMER 8 9 Touch gt key o enter detail setting stage 9 0 Slide along o slider or touch AVIV key to select ON or OFF O Anti theft indicator The red Anti theft indicator is a function for pre venting theft The factory default setting is OFF 9 0 Select BLINKING LED 8 9 Touch gt key o enter detail setting stage 8 9 Slide along 937 slider or touch AVIV key to select ON or OFF O Setting the external amplifier When an external amplifier is used the noise can be decreased by turning off the power supply of the internal amplifier The factory default setting is OFF 9 0 Select AMP CANCEL 8 9 Touch gt key fo enter detail setting stage Slide along 957 slider or touch A MLV key to select ON or OFF o ON Use with connected AMP e OFF Use for inside AMP O Accessory interrupt setting If you connect this unit and supported accessory with a separately
47. kHz to 1602 kHz LW 153 kHz to 279 kHz Usable Sensitivity 28uV USB USB 1 1 and 2 0 compatible with a maximum transfer rates of up to 12Mbps Full speed Decode Format MPEG 1 2 and 2 5 Layer 3 Sampling rate MPEG 1 32 44 1 48 kHz MPEG 2 16 22 05 24 MPEG 2 5 8 11 025 12 MPEG 1 32 320 MPEG 2 8 160 MPEG 2 5 8 160 VBR 32 44 1 48 Bit rate kbps Sampling rate kHz Bit rate kbps 32 36 40 44 48 64 128 160 192 WMA V2 V7 V8 64 80 96 128 160kbps WMA V9L1 Sampling rate 48 44 1 32 24 22 05 16 kHz 12 11 025 8 kHz Bit rate kbps 8 320 kbps Folder Level Limit 8 Level Folder Support 512 File Support 255 per folder Total File Support 130560 Folder Name Maximum 64 single bytes alphabetical letters File Name Maximum 64 single bytes alphabetical letters Bluetooth wireless technology Compliance Bluetooth 2 1 Frequency Range 2 40 2 4835 GHz ISM band RF Power Class 2 2 5mW Profiles HFP A2DP AVRCP OPP Operating Temperature 20 C 60 C Telephone Operation Noise reduction Echo cancellation Full duplex telephone Mic Input External 2 2k ohm 2V electret Audio Maximum Power Output 200 W 50 W X 4 ch Power Output 4 X 18 W DIN 45324 B 14 4 V Bass Control Action 100 Hz 14 dB Middle Control Action 1 kHz 14 dB Treble Control Action 10 kHz 14 dB Line Output with A C 1 kHz 10 kQ 4 0 V Gen
48. mode ON Not selectable Output form Analog and Simple mode ON OFF Requires CCA723 cable e During Simple Mode On please do not change the repeat setting to OFF in the iPod Bluetooth Operations The Bluetooth interface allows you to utilize your car s built in audio system for wireless mo bile phone or music handsfree communication This unit will be able to retrieve phonebook con tacts perform outgoing call receive incoming call and listen to music Note e When an audio device is paired the following operations are the same as USB mode Play Pause Track up down See USB Operations page23 for details Basic Operations 1 Touch the ADJ key to switch to ADJ menu 2 Select TEL in the menu display will be shown as below TELEPHONE CTOL 32 Ol NL EN e IB ae 3 Touch the gt key to select CALL to enter TEL MENU 4 Touch the lt key to select OPT to enter TEL OPTION mode Note e CALL will only appear if paired mobile phone is connected TEL MENU Call method 3 Slide along ect slider or touch AV key the call method changed as following order PHONE BOOK lt gt HISTORY gt REDIAL lt gt DIAL NUMBER lt PHONE BOOK O Call from Phonebook User can search the contact name in the phone book and make call Alternatively user can call from mobile phone 0 0 Select PHONE
49. n dent adjustment value O Setting the beep The factory default setting is ON 9 0 Select BEEP 9 9 Touch gt key fo enter detail setting stage 9 9 Slide along 97 slider or touch AMV key to select ON or OFF 36 Fz O Setting the code 9 0 Select CODE 9 9 Touch gt key to enter detail setting stage AD J SETT ING SETTING CODE CLOCK EDIT When no code is registered 0 9 Slide along sc slider or touch A V key to adjust the value Touch lt gt key to set the previous or next digit SET CODE CTO 32 LCE INPUT OCI e AE A PTO 32 CODE INPUT 1000 e SS AE A PTO 32 CODE INPUT 1100 lt gt 8 9 During finish adjustment touch ENT key for 2 seconds to memory the new setting value AE A CTDL 32 CODE 1111 H t INPUT Common Operations 9 0 MEMORY XXXX will be displayed for 2 sec onds where XXXX is the entered digits SE T gt CODE CTOL Ge L ODE MEMORY 1111 Note e Write down your personal code in case you forget it When code is registered Slide along scr slider or touch AMI V key to input the registered code 9 0 Touch lt gt key to set the previous or next digit SE T gt CODE CTO 32 DEL CODE INPUT Oooo Ce 8 9 During finish adjustment touch ENT key for 2 seconds to confirm SET gt CO0DE CTOL 32 DE L COD
50. n chste Seite lesen Assicurarsi di aprire e leggere la pagina successiva Please note that these are not hardware software failures as it happens to be the structure of the organic Volgende pagina uitvouwen en doorlezen a u b Cerci rese de desplegar y de leer la p gina siguiente electro luminescence display Gl m inte att vika ut och l sa n sta sida N o deixe de abrir e ler a pr xima p gina S Fz700 FZ709E 3 4 FZ709E 2 CONTROLS LES COMMANDES REGLER CONTROLLI REGELAARS CONTROLES KONTROLLER CONTROLOS MAIN UNIT APPAREIL PRINCIPAL HAUPTGERAT APPARECCHIO PRINCIPALE HOOFDTOESTEL UNIDAD PRINCIPAL HUVUDENHET UNIDADE PRINCIPAL D SR y 5 O de TF I gt clarion 9 TL O ae __ Kuel IO OH Mi MAA Fetter eYSUBAS Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d plier cette page et vous r f rer aux schemas quand vous lisez chaque chapitre Hinweis Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapital die Frontdiagramme beachten Nota Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo Opmerking Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken Nota Cuando lea los capitulos despliegue esta pagina y consulte los diagramas Observera Vik ut d
51. o store folder scan play AF function on and Repeat play Toggle repeat on off No function off Press and hold the Press and hold the button for 1 second button for 1 second or longer to perform or longer REG folder repeat play function on and off PTY mode on and Random play Random play No function off Press and hold the Press and hold button for 1 second the button for 1 or longer to perform second or longer folder random play to perform folder random play Some of the corresponding buttons on the main unit and remote control unit have different functions TV VTR is not supported in this model 10 Fz 5 OPERATIONS Basic Operations A CAUTION Be sure to lower the volume before switching off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sudden loud volume may hurt your hearing and damage the unit Please operate this unit by the finger It is not possible to operate it normally with gloves worn Turning on off the power Note e Be careful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery 1 Touch and hold any key for 2 seconds or longer to power on the unit 2 The unit automatically remembers its last Operati
52. on mode and will automatically switch to display that mode 3 Touch and hold the 7 key for 1 second or longer to turn off the power for the unit Note e System check The first time this unit is turned on after the wire connections are completed it must be checked what equipment is connected When the power is turned on the SYSTEM CHECK appears in the display This unit will switch to Radio mode after system check Selecting a mode 1 Touch the key to switch to Source menu 2 Touchthe corresponding key beside the Source mode name to enter into desired mode Note Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 5 3 There are 4 selections in the Source menu ST LINE rR O SE H SOURCE vi LC Ji H Pod can connect to this unit via USB SLOT gd ALI Adjusting the volume 1 Slide up along the Va or touch the key to increases the volume 2 Slide down along the voc or touch the key to decreases the volume The volume level is from O minimum to 33 maximum Switching the title display 1 Touch the key to switch the title display 2 Each time you touch the LH key the display switches in the following order O Tuner AUX BT JJ mode No Title display O iPod mode TRACK ALBUM gt ALBUM ARTIST gt ARTIST TRACK gt TRACK ALBUM O USB mode ALBUM TRACK gt ARTIST TITLE gt AR
53. racks might not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording A CAUTION e Insert and remove a USB memory device only when the device is not being accessed Connecting or disconnecting the device at the following times may result in the loss of data If the USB memory device is removed or power is disconnected during writing to the device When the device is subjected to static electricity or electric noise e Do not leave a USB memory device unat tended in an automobile Exposure to direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device USB Operations Connecting a USB memory device 1 Connectthe USB memory device to the USB slot Playback will begin from the first file recorded on the device If the device is not recognized touch the O d key to switch to the Source menu and select the source to the device Always insert the device fully into the connector Incomplete connections may cause the device not to be recognized Depending on the number of tracks recorded some amount of time may be required until all tracks are read into the unit The order in which tracks are recorded may differ depending on the device connected the actual playback order may not be the same as that indicated on your Computere display Ka Ka Ka To listen to tracks on
54. rted only with amplifiers equipped with this function Output is not supported from RCA cables O Setting the subwoofer You can set the low pass filter of subwoofer 8 0 Select S W LPF 9 9 Touch gt key to enter detail setting stage 8 9 Slide along ser slider or touch A V key to select the setting in sequence THROUGH lt gt 60 lt gt 90 lt gt 120 The factory default setting is THROUGH O Adjusting the subwoofer output volume You can adjust the volume output from the unit s subwoofer output terminal This adjustment can be performed only when the S W LPF is set to 60 90 or 120 Select S W VOL 9 92 Touch gt key to enter detail setting stage 9 9 Slide along 937 slider or touch A MLV key to increases or decreases the subwoofer volume The factory default setting is 0 Adjustment range 6 to 6 When the volume level is more than 30 the subwoofer volume adjustment value can not reach 6 Note e During SOUND adjustment mode if no operation is performed for more than 10 seconds this mode can be cancelled and return to previous mode FZ709E 15 16 Basic Operations O CT Clock Time function The CT function receives CT data sent from an Radio Data System station and displays the time If a CT data is not being received Ing H ap pears in the display Note e CT data is no
55. set this setting to ANALOG optional iPod video cable CCA723 is required The factory default setting is DIGITAL 9 0 Select OUTPUT FORM Touch gt key jo enter detail setting stage 9 9 Slide along S77 slider or touch A V key to select DIGITAL or ANALOG 9 0 After completing settings touch the ENT key to return to the 1 selected item Note e The setting will only take effect after disconnecting and re connecting the iPod O Select Simple Control mode This function is to select the mode to operate the iPod contents The factory default setting is OFF 9 0 Select SIMPLE MODE 9 9 Touch gt key to enter detail setting stage 9 9 Slide along Sh slider or touch A V key to select ON or OFF 30 Fz e ON To operate iPod contents from iPod e OFF To operate iPod contents from this unit After completing settings touch the ENT key to return to the 1 selected item Notes e During iPod Simple mode ON iPod Mode will be displayed as below and cannot switch to other display layout iPod CTO 32 Bai Pod Mode EPT ELE hii AAC e During Simple Mode On do not operate from iPod and this unit at the same time e iPod 5G and iPod nano 1G cannot select both digital output and simple control mode on at the same time Output form Digital and Simple mode OFF Default Output form Digital and Simple
56. sold cable you can listen the output sound on your car speakers The factory default setting is OFF 8 0 Select INT SWITCP 8 9 Touch gt key Jo enter detail setting stage 8 9 Slide along 27 slider or touch A V key to select ON OFF or MUTE 38 Fz709E e ON You can listen from the speakers when accessory is connected to this unit When listening to the connected accessory you can adjust the volume by turning the ROTARY knob eo OFF This unit continues normal operation even when the accessory is interrupted e MUTE The sound from this unit is muted during accessory is interrupted O Performing a system check This function allows you to perform a system check from the adjust mode when required Select SYSTEM CHECK 8 9 Touch ENT key SYSTEM CHECK ap pears in the display 9 9 After finish checking this unit will switch to previous mode AUX function This system has an external input jack on the rear panel so you can listen to sounds and music from external devices connected to this unit O Selecting AUX IN sensitivity Make the following settings to select the sensi tivity when sounds from external devices con nected to this unit are difficult to hear even after adjusting the volume The factory default setting is MID 1 During AUX mode touch the key to switch to ADJ menu 2 Select OPTION in the menu to enter AU
57. st stations transmitting Radio Data System data This system can display the name of the broad cast station being received PS and can auto matically switch to the broadcast station with the best reception as you move long distances AF switching Also if a traffic announcement or programme type is broadcast from an Radio Data System station no matter what mode you are in this broadcast is received Additionally if EON in formation is received this information enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information from other stations TP This function is not available in some areas When using the Radio Data System function always set the radio to FM mode e AF Alternative Frequency e PS Programme Service Name e PTY Programme Type e EON Enhanced Other Network e TP Traffic Programme Radio Data System interrupt does not function during AM radio reception When set receives Radio Data System signal and can read PS data PS appears in the display TA Traffic Announcement In the TA standby mode when a traffic announce ment broadcast starts the traffic announcement broadcast is received as top priority regardless of the Function mode so you can listen to it Traffic programme TP automatic tuning is also pos sible This function can only be used when TF is lit in the display When TF is lit this means th
58. t proper Use only properly encoded MP3 WMA AAC MP3 WMA AAC format files Connectors are loose Disconnect the device and reconnect securely Sound is interrupted or The MP3 WMA AAC files Use only properly encoded MP3 WMA AAC has noise are improperly encoded files The device isn t The device is damaged Disconnect the device and reconnect If the recognized device is still not recognized try replacing with Comnectors are loose a different device According to the state of Disconnect the device and reconnect operation on the device securely the communication fault is caused USB iPod Can t insert the device The device has been Try reversing the connection direction of the inserted improperly device usually the brand name surface should be facing left The connector is broken Replace with a new device Fz709e 39 CO lt E m TROUBLESHOOTING TI roem Ye Bees Audio streaming is disconnected after telephone interrupt Cannot perform remote control for audio streaming Audio streaming will begin to pulse on off when using your connected phone Display is showing device name connected but there is no sound output This is probably happen when audio streaming and telephone function are from the same device mobile phone Dependent on phones AVRCP is not connected Due to excessive Bluetooth activity on a low bandwidth link Some phones will not handle this
59. t transmitted in some countries and by some broadcast stations Also in some areas the CT may not display accurately FZ709E Radio Mode Operations Listening to the radio 1 Touch the SZ key to switch to Source menu 2 Select TUNER to enter Radio mode The frequency or PS and PTY appears in the dis play e PS Programme service name e PTY Programme type 3 To select a preset band touch the E key and then select one of the preset bands such as FM1 FM2 FM3 or AM1 Every time the H key is touched the band switches in the following order FM1 gt FM2 gt FM3 gt AM1 gt FM1 4 Touch the lt gt key to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning There are 2 types of seek tuning DX SEEK and LOCAL SEEK DX SEEK can automatically tune in to receivable broadcast stations LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity 1 Touch the IB key and select the desired band FM or AM H MANI is lit in the display touch and hold the B key for 1 second or longer MARU in the display goes off and seek tuning is now avail able If THH is lit in the display TP stations are auto matically sought 2 Touch the lt 1 gt key to start automatic sta tion tuning When the gt key is touched the station is sought in the direction of higher fr
60. ta de garant a adjunta y gu rdela cuidadosamente con este manual Svenska Tack f r ditt val av denna Clarion produkt Var god las denna manual i sin helhet innan du anvan der denna utrustning Efter att du last denna manual se till att f rvara den pa ett praktiskt st lle t ex handskfacket Kontrollera inneh llet pa det medf ljande garantikor tet och f rvara det aktsamt tillsammans med denna manual Portugu s Obrigado por comprar este produto Clarion Por favor leia este manual do utilizador na sua totali dade antes de colocar o equipamento a funcionar Ap s ler este manual assegure se que o tem m o e x porta luvas Verifique os conte dos do cart o de garantia inclu do e mantenha o cuidadosamente com este manual Dichiarazione di conformit lo mandatario nell UE Clarion Europe S A S Z I du Pr a Varois Route de Pompey 54670 Custines FRANCE Dichiaro che il prodotto FZ709E conforme al DM 28 08 1995 ottemperando alle prescrizioni dei DM 25 06 1985 e DM 27 08 1987 Display Items Contents 1 PRECAUTIONS Title display 1 PRECAUTIONS csonasrisnenaianatr iberia ida 4 Tri ZE 2 CONTROL EE 5 1 This unit is applicable for on road 4 wheel 3 This unit is a Capacitive Touch Sensing yea may an EARCH RE 5 vehicle purpose only Use for tractor fork product The keys can be activated by finger truck bulldozer off road vehicle 2 or
61. tachment detachment of the iPod e The Repeat function on the iPod will be changed when you connect disconnect the iPod to the unit iPod OPTION O During USB mode touch the key to switch to ADJ menu Select OPTION in the menu to enter iPod Option mode E Slide along S 27 slider or touch AV V key the iPod Option mode changed as following order REPEAT gt RANDOM gt OUTPUT FORM gt SIMPLE MODE gt REPEAT Note e During trick play TRICK OFF will be appeared before REPEAT item Repeat play Play back one track repeatedly Select REPEAT Touch gt key to enter detail setting stage 0 9 Slide along Sc slider or touch A V key to select ON Touch the ENT key REPEAT ON will be displayed for 2 seconds 0 0 BSG light in the display 28 FZ O Repeat off This function allows you to play all tracks in the current folder repeatedly 8 0 Select REPEAT 9 9 Touch gt key to enter detail setting stage 9 9 Slide along 27 slider or touch A V key to select OFP 8 2 Touch the ENT key REPEAT OFF will be displayed for 2 seconds O Random play Play all albums within a selected category in ran dom order Corresponds to Shuffle Albums command on iPod 9 0 Select RANDOM 8 9 Touch gt key to enter detail setting s
62. tage 9 9 Slide along evt slider or touch AMV key to select TRACK 8 9 Touch the ENT key TRACK RANDOM will be displayed for 2 seconds 9 0 EM light in the display O All random play Play all tracks within a selected category in ran dom order Corresponds to Shuffle Songs command on iPod 9 0 Select RANDOM 8 9 Touch gt key o enter detail setting stage 9 0 Slide along son slider or touch AIL V key to select ALL Touch the ENT key ALL RANDOM will be displayed for 2 seconds 9 0 BEAM light in the display O To cancel trick play 9 0 Select TRICK OFF 8 9 Touch the ENT key to cancel trick play 9 9 Display will return to playback display Note e When playing the last track within a selected category in Random mode if ACC is switched off then on again playback will begin from a different track Pod Operations O Selecting category from the iPod music menu 1 Touch and hold the I key for 1 second or longer 2 Select to switch to music menu or video menu 3 If MUSIC is selected from the list iPod music menu categories will be displayed Notes e f the iPod does not support video the iPod music menu categories will be displayed directly e Repeat and Random mode operations are not supported when in the iPod menu e In iPod menu if you touch the lt gt or touch A V key fast playback may not
63. tion You need to enter the TUNER OPTION to per form the Radio function TUNER OPTION O During Tuner mode touch the E key to switch to ADJ menu Select OPTION in the menu to enter Tuner Option mode Slide along ec leider or touch A V key the TUNER OPTION mode changed as following order P CH MEMORY lt gt PTY lt gt PTY SELECT gt AF REG lt gt LANGUAGE lt gt PRESET SCAN lt gt AUTO STORE gt P CH MEMORY Notes e Items in bracket PTY PTY SELECT AF REG are called Radio Data System Adjustment mode Please refer to page 20 for Radio Data System Adjustment mode e PTY SELECT only available when PTY is on e REG only available when AF is on O Preset memory function Preset memory function can store up to 24 sta tions Six stations for each of FM1 FM2 FM3 and AM1 O Manual memory function 9 0 Select P CH MEMORY 9 9 Touch gt key to enter detail setting stage 9 9 Slide along scr slider or touch AMV key to select the preset channel number to be stored 9 0 Touch ENT key for 2 seconds to store the frequency into the selected preset channel 9 9 MEMORY is displayed for 2 seconds before revert to main display FZ709E 17 Radio Mode Operations Preset scan Preset scan receives the stations stored in pre set memory in order This function
64. ur preference To change sound setting Touch the key to switch to ADJ menu Select SOUND in the menu to enter Sound Adjustment mode Slide along the scm slider or touch A V key the Sound Adjustment mode changed as following order BEAT EQ lt gt BASS gt MID gt TREBLE gt BBE MP gt BALANCE gt FADER lt gt M BEX lt HPF lt gt S W LPF gt S W VOL gt BEAT EQ Notes 1 BASS MID TREBLE are only available if CUSTOM is selected in BEAT EQ 2 BBE MP is only available if USB is selected in source mode and the OUTPUT FORM is set to DIGITAL Please refer to page 30 O Setting the BEAT EQ This unit is provided with 4 types of sound tone effects stored in memory Select the one you pre fer The factory default setting is OFF 9 0 Select BEAT EQ 8 8 Touch gt key to enter detail setting stage 9 9 During detail setting stage each time your slide along scr slider or touch A V key the tone effect changes in the following order OFF lt gt BASS BOOST gt IMPACT EXCITE lt gt CUSTOM OFF No sound effect BASS BOOST Bass emphasized IMPACT Bass and treble emphasized EXCITE Bass and treble emphasized mid emphasized CUSTOM User custom Basic Operations W
65. ve PTY broadcast In the TA standby mode a TP station has priority over a PTY broadcast station The factory default setting is OFF 9 0 Select PTY 8 9 Touch gt key to enter detail setting stage A 9 9 Slide along sea slider or touch A V key to select ON or OFF 8 2 After completing settings touch the ENT key to return to the 1 selected item o ON PTY in the display lights and PTY standby mode is turned on When the selected PTY broadcast starts the PTY item name appears in the display e OFF PTY in the display goes off and PTY standby mode is cancelled O Cancelling a PTY interrupt broadcast Touch the key during the PTY interrupt broadcast the PTY interrupt is cancelled and the unit returns to PTY standby mode O Selecting PTY 8 0 Select PTY SELECT 8 9 Touch gt key to enter detail setting stage 9 9 Slide along s h slider or touch A MLV key to select th desired PTY Radio Data System Operations There are 29 types of PTY below can be select ed ENGLISH Phonem Phonem Jazz Jazz Nation Nation musce Oldies Oldies Folk Folk musio Document Documentaries During PTY list if no operation is performed for 7 seconds the display will return to 1 PTY SELECT item Easy M Light M Classics Children e PTY seek eV Touch the gt key to search for a PTY broadcast in the direct

Clarion FZ709E Bluetooth Headset User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents