Bushnell 360311BG GPS Receiver User Manual
Contents
1. Operating Instructions Mode d emploi Q Modo de empleo Model Modele Modelo GXL 125 OOR Equipment Parts 1 Power Light 2 Foam Board Pouch Selector 3 On Off Switch 4 Ready Light 5 Temperature Control 6 Loading Area Safety Instructions 1 Read all instructions before use Save these instructions for later use 2 Follow all warnings and instructions marked on the product 3 Use the Fellowes laminator only for its intended purpose of laminating documents according to the indicated specifications 4 Extreme caution should be taken when the appliance is used by or near children or invalids 5 Do not insert anything in the throat opening of the machine other than carriers with pouches documents 6 Do not attempt to remove jammed materials by poking objects into the laminator and particularly do not insert any metal objects such as a letter Opener Knife scissors paper clips etc into the laminator 7 Do not service this product yourself Opening removing covers may expose you to dangerous voltage points or other risks and may void manufacturer s warranty 8 Place unit in a secure stable work area to prevent the machine from falling and possibly causing personal injury and damage to the laminator 9 Wipe exterior only with a damp cloth only when unplugged Do not use near water Do not use detergents or solvents 10 The laminator is intended for indoor use only 11 Turn l2. Thickness 5mm Maximum Foam Board Pouch Width 12 305mm Maximum Pouch Thickness 10 mil Maximum Pouch Document Thickness 5 64 2mm Warm Up Time 2 3 minutes Carrier Optional for hot pouches but recommended Not required for foam boards Limited Warranty Fellowes Manufacturing Company warrants all Laminating Machines to be free from defects in material and workmanship for a period of one year from the date of purchase by the original consumer The exception to this are the rollers which are subject to wear If any part is found to be defective during the warrant period your sole and exclusive remedy will be repair or replacement at Fellowes option and expense of the defective part This warranty does not apply in cases of abuse mishandling or unauthorized repair ANY IMPLIED WARRANTY INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product This warranty gives you specific legal rights You may have other legal rights which vary from state to state To obtain service under this warranty on machines purchased in the USA return the machine prepaid to the address below Please allow two weeks for processing Return with machine Copy of original sales receipt A card stating your name address daytime telephone number
3. completion of usage For Use With Hot Pouches 1 Before turning power switch on verify that the Foam Board Pouch Selector is positioned correctly in the Pouch location 2 Turn power on by positioning On Off switch in the Heat Only location This will allow the machine to pre heat without engaging the laminating rollers NOTE During first usage a small white puff of smoke may appear which is common to a new laminator 3 Adjust the temperature control to correspond with pouch thickness 4 Wait 2 3 minutes for green ready light to illuminate This indicates laminator is ready for use 5 Place item to be laminated into a Fellowes laminating pouch Center the item for an even border a border of approximately 1 8 to 1 4 is recommended 6 Place pouch into carrier Optional but recommended 7 Insert the carrier sealed edge first slowly into the front loading area of the laminator until it engages with the machine 8 The finished laminated item will automatically exit at the rear of the machine After the carrier has stopped moving place it on a flat surface and allow to cool for one minute 9 Remove laminated item from carrier 10 Turn the laminator off and unplug after completion of usage OOR OOR Specifications GXL 125 Electrical 120V Machine Dimensions 5 1 8 x 22 3 4 x 10 1 4 HxWxD 130mm x 578mm x 260mm Machine Weight 12 Ibs 5 5 kg Maximum Foam Board Pouch
4. aminator off when not in use for an extended period of time 12 Use laminator in close proximity to electrical Outlet Product must be easily accessible when plugged into outlet Electrical Safeguards 1 The Foam Board Laminator must be connected to a supply voltage corresponding to the electrical rating of the machine as indicated 2 Unplug the laminator before moving it or when it is not in use for an extended period of time 3 Do not let cord hang over edge of counter or touch hot surfaces 4 Do not operate the laminator with a damaged cord or plug or after the laminator malfunctions has been dropped or is damaged in any manner Please call customer service at 1 800 945 4545 for information on repairs or adjustments 5 Do not overload electrical outlets beyond their capacity as this can result in fire or electrical shock 6 Do not alter attachment plug Plug is configured for the appropriate electrical supply Operation A key feature and added benefit of the GXL 125 allows you the versatility of laminating both Foam Boards and Hot Pouches To Start Place the laminator on a sturdy flat work surface Allow ample clearance behind the laminator for laminated items to exit completely Plug the laminator into a power source that matches the laminator s rate of voltage NOTE Fluctuating voltage may cause inconsistent lamination or mechanical problems with the laminator If you suspect voltage probl
5. ems use a voltage stabilizer For Use With Foam Boards 1 Before turning power switch on verify that the Foam Board Pouch Selector is positioned correctly in the Foam Board location 2 Turn power on by positioning On Off switch in the Heat Only location This will allow the machine to pre heat without engaging the laminating rollers NOTE During first usage a small white puff of smoke may appear which is common to a new laminator 3 Adjust temperature control to the foam board setting 4 Wart 2 3 minutes for green ready light to illuminate This indicates laminator is ready for use 5 Place item to be laminated onto a Fellowes foam board by raising laminate cover sheet and inserting document Center the item for an even border a border of approximately 1 8 to 1 4 is recommended 6 Initiate laminating rollers by moving selector to Heat and Rollers setting 7 Insert the foam board sealed edge first slowly into the front loading area of the laminator until it engages with the machine NOTE Heat source located on top of machine For best results feed foam board with item to be laminated facing top 8 The finished laminated item will automatically exit at the rear of the machine After the foam board has stopped moving place it on a flat surface and allow to cool for one minute 9 Mount easel or hang tab to back of foam board if desired 10 Turn the laminator off and unplug after
6. machine model and serial number plus a brief description of the problem For specific instructions on obtaining service under this warranty on machines purchased outside the USA contact the appropriate location listed below Warrantor Fellowes Manufacturing Company Contact For Service Vos Contacts Fellowes Sus Contactos Fellowes United States 1 800 955 0959 Australia In Melbourne 03 9330 3211 Outside Melbourne 1 800 331 177 Canada 1 800 665 4339 United Kingdom 01302 885 331 Japan 81 3 5496 2401 Benelux 31 0 347 377988 Italia 39 071730041 Deutschland 49513149770 France 33 0 4 72 08 25 45 Ps 1789 Norwood Avenue Itasca Illinois 60143 1095 630 893 1600 Customer Service 1 800 945 4545 http www fellowes com Australia Benelux Canada France France Deutschland Italia Japan United Kingdom Tullamarine Vic Vianen NL Markham Ont Montanay Rennes l L Garbsen Han Camerano AN Tokyo Doncaster S Yorks Part No 70987 2000 Fellowes Printed in China
Download Pdf Manuals
Related Search