Bushnell 263230CL Binoculars User Manual
Contents
1. NIGHT WATCH 3x32 DIGITAL NIGHT VISION w Color LCD INSTRUCTION Model 263230CL MANUAL Lit 4 98 1588 03 10 PARTS AND CONTROLS REFERENCE Da 8 Red IR On LED Green Power On LED a 9 Orange Auto Off LED Indicator LEDs detail Congratulations on the purchase of your Bushnell Night Watch Digital Color Night Vision Comprised of high guality electronics and optics this Bushnell Night Watch unit is a hand held digital night vision viewing system that utilizes a low light charge coupled device CCD sensor providing images comparable to generation 2 amp 3 resolution Day and Night time images are magnified and displayed on a Color LCD micro display screen which provides a color image when ambient light conditions are high enough and a desaturated color or neutral monochrome image not the typical green screen night vision under lower ambient light conditions The Digital Color Night Vision also contains an RCA video output port which allows live transmission to video camcorders computer lap tops monitors and television screens HOW DIGITAL NIGHT VISION WORKS Bushnell Digital Night Vision products collect existing light through the objective lens The light is then processed through a highly sensitive CCD sensor and transferred to the micro liguid crystal display color LCD Images viewed on the LCD are magnified 3 times An infrared illuminator provides a light source to enable viewing i2. ed Do not leave the device in direct sunlight or rain e Remove the batteries if the device will not be used for longer than a few weeks For any other problems or guestions please contact Bushnell Customer Service at 800 423 3537 www bushnell com TWO Year LIMITED WARRANTY Your Bushnell product is warranted to be free of defects in materials and workmanship for two years after the date of purchase In the event of a defect under this warranty we will at our option repair or replace the product provided that you return the product postage prepaid This warranty does not cover damages caused by misuse improper handling installation or maintenance provided by someone other than a Bushnell Authorized Service Department Any return made under this warranty must be accompanied by the items listed below 1 A check money order in the amount of 10 00 to cover the cost of postage and handling 2 Name and address for product return 3 An explanation of the defect 4 Proof of Date Purchased 5 Product should be well packed in a sturdy outside shipping carton to prevent damage in transit with return postage prepaid to the address listed below IN U S A Send To IN CANADA Send To Bushnell Outdoor Products Bushnell Outdoor Products Attn Repairs Attn Repairs 8500 Marshall Drive 25A East Pearce Street Unit 1 Lenexa Kansas 66214 Richmond Hill Ontario L4B 2M9 For products purchased outside the United States or Canada please c
3. n total darkness The Bushnell Night Watch Digital Color Night Vision unit is ideal for camping caving scouting maritime navigation and observing wildlife under the veil of darkness patrolling warehouses and similar surveillance operations where light is scarce OPERATING INSRUCTIONS I Slide the battery compartment door 2 open in the direction of the white arrow Insert two CR123 batteries 3v lithium not included into the battery compartment Be sure to observe the correct battery polarity as shown on the left The end of the top battery should be facing out towards the battery door and the end of the lower battery should be facing out Remove the front lens cover When finished using the unit replace the cover to protect the objective lens 1 and IR light 7 Press the ON OFF switch 3 to power the device on A green LED light 4 indicates that the power is on To extend battery life the unit will normally turn off automatically after 2 minutes if no buttons are pressed To cancel this auto off function briefly press and release the IR switch 8 on the top of the unit The power will then remain on until you turn it off manually with the ON OFF switch The orange light on the lower half of the power indicator light 4 will glow if the unit is in auto off mode default and will turn off if you cancel the auto off function If the batteries become weak the green power indicator LED will blink View through
4. on If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Shielded interface cable must be used with the eguipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT HC Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer B ll 2010 Bushnell Outdoor Products 800 423 3537 www bushnell com
5. ontact your local dealer for applicable warranty information In Europe you may also contact Bushnell at Bushnell Germany GmbH European Service Centre Mathias Bruggen Str 80 D 50827 K ln GERMANY T l 49 221 995568 0 Fax 49 221 995568 20 This warranty gives you specific legal rights You may have other rights which vary from country to country 2010 Bushnell Outdoor Products SPECIFICATIONS Magnification 3x Objective Size 32 mm Battery Type Two CR123 3v lithium batteries not included Viewing Range 1 328 ft 3 100m Field of View 70 ft 100 yds 23m 100m Operating Temperature Range 14 104 10 40 C Humidity gt 90 Dimensions 5 9 x 3 8 x 2 0 in 150 x 95x 51 mm Weight 13 4 oz 380g Tripod Mountable Yes Video Out NTSC video standard Note low ambient light operation may create low signal levels External AC Power Adapter 6V DC 1A plug polarity positive tip FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installati
6. rrectly 2 If the batteries are installed correctly and the batteries are good then the green LED indicator light should be on steadily 2 Check that the power button 3 has been pressed Power does not stay on 1 Replace the batteries when they become weak 2 The unit normally turns off automatically after 2 minutes to conserve battery power To defeat this briefly press the IR switch Image is not focused 1 Adjust the objective focus wheel 6 and eyepiece display focus 5 2 Make sure you are not too close to the object you are viewing CARE AND MAINTENANCE Your Bushnell Digital Night Vision device was designed to provide many years of reliable service To ensure that you get the most enjoyment out of your Digital Night Vision device always obey the following warnings and precautions Do not open the body of the device or otherwise attempt to service this device e Always store the device in a dry well ventilated room e Keep the device away from any heating and air conditioning vents or other heating devices direct sunlight and moisture e Avoid dropping or otherwise shocking the unit Although designed for rugged outdoor use this device incorporates a sophisticated digital circuitry which could be damaged in extreme cases of misuse e Clean the optical lens with a professional lens cleaning supplies Clean the exterior of the device with a soft clean cloth e Avoid removing the eyepiece as the LCD display could become damag
7. the eyepiece 5 and select an object to focus on 5 To focus the image first rotate the eyepiece rubber ring 5 until the edges of the LCD display appear sharp to your vision Next rotate the objective lens focus wheel 6 until the object is in focus and the view is clearest At this point the display focus eyepiece ring is set for your individual eyesight and will not reguire further adjustment when viewing objects at different distances When changing the viewing distance simply rotate the main focus wheel 6 until the image is in focus 6 The Digital Night Vision has a light level sensor on the front of the unit 14 which detects low light conditions and automatically turns on an infrared illuminator 7 to improve image guality When the IR light is on this is indicated by the red LED 9 above the power indicator You can also turn the IR illuminator on manually anytime even if ambient light levels are high by pressing and holding the IR switch 8 for a at least two seconds when you release the switch you will see the red IR illuminator LED indicator confirming the IR illuminator is on now 7 To increase the brightness of the IR illuminator press the key 10 This can be used to extend your viewing distance To decrease the brightness of the IR illuminator press the key This can be helpful in improving the LCD display viewing guality by avoiding wash out in very low light conditions or complete darkness 8 While mo
8. ving from viewing one object to another object it might be necessary to rotate the objective lens focus wheel and adjust the IR illuminator brightness in order to achieve the best image guality 9 The Digital Night Vision includes a video output TV Out jack 13 This port allows one to transmit images to an external video monitor or video recorder Plug the output video cable into the video output jack TV Out When the Digital Color Night Vision is connected to compatible NTSC video eguipment the image produced by the unit can be monitored and or recorded 10 The Digital Color Night Vision also includes a 6 volt auxiliary power input jack 12 To connect the Digital Night Vision to a household outlet use the included 6 volt AC power adapter Note that this feature is not intended to recharge batteries of any type and should not be used for that purpose It simply provides an option for an external power source NOTE When the batteries are inserted and the external power source is turned on the device operates on the external power source If you unplug the external power source and you want to use the battery source you have to press the ON button 3 to make the device operate NOTE A standard tripod mounting socket is provided on the bottom of the unit Remove the round rubber plug near the center of the bottom face of the unit and set it aside TROUBLESHOOTING Unit will not turn on 1 Check that the batteries are installed co
Download Pdf Manuals
Related Search