Home

Axor 97987000 Plumbing Product User Manual

1. About power mode You can power on and off the Base Unit and bring the system in standby mode In standby mode the system mutes the output signal to the display If your display supports this it will automatically enter power saving mode To power on the Base Unit or awake it from standby up 1 When the Base Unit is shut down set the rocker switch at the back of the Base Unit to Refer to image 3 1 i Image 3 1 Rocker switch 2 If the system does not start up automatically push the standby button shortly Refer to image 3 2 R5900001 CLICKSHARE 21 11 2018 LLL 11 3 Getting Started Image 3 2 Standby button The system is now powered on To put the Base Unit in standby mode or awake it 1 Push the standby button shortly Refer to image 3 2 Note f you plug in a Button into your laptop and connect to it the Base Unit automatically wakes up from standby enable its display output If no Buttons have been connected to it for some time the Base Unit can automatically enter standby mode To shut down the Base Unit The Base Unit can be shut down in two ways 1 Push the standby button until the Base Unit shuts down Refer to image 3 2 2 Set the rocker switch at the back of the Base Unit to 0 Refer to image 3 1 3 2 Basic Use Basic functionality When entering a meeting room equipped with ClickShare and if the display is not in power saving mode the ClickShare wallpaper is sho
2. 15 Go to the ClickShare drive and run the software Right click on the speaker icon and switch off the mute You or an administrator should change the corresponding setting via the web interface Switch on the audio system of the meeting room Check audio connection between the Base Unit audio out green connector and the audio system of the meeting room With a Button inserted set ClickShare speaker as your default speaker Enable Audio Functionality in the Base Unit s web interface and re pair the dongles Re pair the buttons ClickShare tries to restore the connection automatically If this fails the LEDs of the Button start blinking red You should unplug the Button from your laptop and start a new Switch on the display Select the correct input Re insert the display cable to the display and the Base Unit You or an administrator should change the corresponding setting via the web interface Briefly push the standby button on the Base Unit or plug in a Button and run the ClickShare client software Re pair and update the software of the Button by inserting it in the front USB port of Base Unit Switch on the display Re insert the display cable to the display and the Base Unit 27 4 Troubleshooting 28 Problem After inserting the Button into your laptop you cannot find the ClickShare drive Some programs of Windows are not shown on the display Cause No automatic r
3. B ITE limits Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Federal Communication Commission Interference Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense If this equipment does cause interference with radio communications services which can be determined by turning the equipment off and Oh you are encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving anten
4. TO LICENSE THE SOFTWARE BY OPENING THE SOFTWARE PACKAGE OR USING THE HARDWARE IN WHICH THE SOFTWARE IS EMBEDDED YOU AGREE TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT The Software as supplied by BARCO is licensed not sold to you on a non exclusive basis for use only under the terms of this license and BARCO reserve all rights not expressly granted to you You may own the carrier on which the Software is provided but the Software is owned and copyrighted by BARCO or by third party suppliers Your license confers no title or ownership and is not a sale of any rights in the Software or its documentation By installing executing and or using the Software either as initial version or as an upgrade update patch or enhancement of a prior release this Software License shall supersede any terms and conditions previously agreed upon whether or not in writing between Barco and you with respect to the subject matter of this Software License and such previous terms shall from the date hereof cease to have any force or effect provided however that this Software License shall not be construed as a renunciation discharge or waiver of any right or remedy provided in any terms and conditions previously agreed upon with respect to a failure of either party to perform any of its obligations under any terms and conditions previously agreed upon Software Specifications The Software contains the following software products ClickShare Software License Te
5. cable GB 2099 4x R9861006D01 wall ceiling mounting brackets R9861006T01 a DVI to VGA converter R9861005NA R9861006BNA power cable NEMA 5 15 4x R9861006D01 wall ceiling mounting brackets R9861006T01 a DVI to VGA converter R9861005WW R9861006BEU power cables CEE7 and BS 1363 4x R9861006D01 wall ceiling mounting brackets R9861006T01 a DVI to VGA converter Contact your local sales representative for the correct regional variant to be used in your country Optional accessory ClickShare Link Order number R9861001 Image 2 2 ClickShare Link Using the optional ClickShare Link allows you to use your iPad with ClickShare Via a cable or wireless via Apple TV the complete content of your iPad touchscreen is transferred to the meeting room screen A ClickShare Link kit contains 1 ClickShare Link unit 1 DVI to HDMI convertor 1 power adapter 4 power clips 1 USB cable 2 2 About the Base Unit Base Unit functionality The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the sound of the meeting room s audio system The Base Unit can be inside a cabinet in the meeting room or put on the meeting room table or mounted on a wall or ceiling Check the Installation Guide for instructions on how to install the Base Unit R5900001 CLICKSHARE 21 11 2013 2 Introduction to ClickShare Image 2 3 The Base Unit 1 USB port 2 Status LED strip 3 S
6. el FATF e 4 A 24 CLICKSHARE BUTTON Table of contents TABLE OF CONTENTS 1 Introduction eiii iter e e ax 1 4 Versions ui denne dent it ete ce i dam ats safe ne hob t e lads anl ne Ara ai Meee a frd He ANA EE 1 2 Aboutthis guide 1 3 Symbols and fonts 2 Introduction to ClickShare cerei wees Iren a eee Ra rr rrr rrr enar eee 5 2 About the ClickShare product Herr Lee nee de EY Edi RR pve qu i ER EET 5 2 2 About the Base Unit ans Seer nn Sava EXP IE Riga hoa Be ae were SOU UU EN T TODA UR des a e UNES EDI PU IE qe ETE 6 2 3 About the Button 244 AbOutthe Tray seco Um eo ide fetu EE EHE ER EI Dose Ot pei dead e e bocca potis e un Ue TUE rg 2 5 Mobile Device Support zitat tae ten tees Sees aident eke Da qvo meine deor RE XEM tact TM Deuce 9 Dei Getting Started EEEE EE EEIE re EUMDEM E E EE E 11 8 14 Poweringthe Base Uniton and off egeo dre an Dex prep cee ade RR cus QUE es QUUD Een rate d ei eee 11 3 2 Basic USC i osos t ERREUR UU DACIA DR RD ES RUBUS NUS TEMA NAA eae TOS 3 3 Advanced Use 3 4 Use ofaniOS device with ClickShare Link soo Ee ne peii ER dan SEED mi net I ua 17 3 5 User Interface 3 6 Capture mode 3 7 Shared desktop primary extended 3 9 Audio configuratiori oret sn Mira bed er ued e De tne ERE cok e IR REA E Vnde edi TER a A Yelp Devan alis 21 3 9 Pairing i eoe eun E ten RE EI Up aed bI aa EUM Me L
7. or any Authorized User are in breach of any of the Software License s terms YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU AS IS BARCO DOES NOT MAKE NOR INTENDS TO MAKE ANY WARRANTIES OR REPRESENTATIONS EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT OF INTELLEC TUAL PROPERTY AND DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT SUCH ERRORS WILL BE CORRECTED BY BARCO AND YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES ASSOCIATED WITH RECTIFICATION REPAIR OR DAMAGE CAUSED BY SUCH ERRORS YOU ALSO ACKNOWLEDGE AND AGREE THAT BARCO ACCEPTS NO LIABILITY FOR ANY DAMAGES LOSSES OR CLAIMS YOU OR ANY THIRD PARTY MAY SUFFER AS A RESULT OF YOUR USE OF THE SOFTWARE IN JURISIDCTIONS WHERE BARCO S LIABILITY CANNOT BE EXCLUDED BARCO S LIABILITY FOR DIRECT DAMAGES SHALL BE LIMITED TO AN AMOUNT OF 250 EURO IN THE AGREGATE OR TO THE MAXIMUM EXTENT PERMITTED BY LAW WHERE NO FURTHER EXCLUSION IS LEGALLY ALLOWED TO THE MAXIMUM EXTENT PERMITTED BY LAW IN NO EVENT WILL BARCO BE LIABLE FOR ANY INDIRECT SPECIAL PUNITIVE INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND WHICH MAY ARISE OUT OF OR IN CON NECTION WITH THE SOFTWARE THIS SOFTWARE LICENSE OR THE PERFORMANCE OR PURPORTED PERFORMANCE OF OR FAILURE IN THE PERFORMANCE OF BARCO S OBLIGATIONS UNDER THIS SOFTWARE LICENSE OR FOR ANY ECO NOMIC LOSS LOSS OF BUSINESS CONTRA
8. the meeting room audio system Your content is removed from the display and the LEDs of your Button are blinking white Nothing is shown on the display at all Two laptops connected with the Base Unit in a dual display meeting room but only one shows an image R5900001 CLICKSHARE 21 11 2013 Cause You are the fifth person that wants to share his content to the display Only four screens can appear simultaneously A message appears on your computer The ClickShare client software is not running Your audio signal on your PC is muted Audio on the Base Unit is disabled Audio system of the meeting room is not Switched on When using separate audio audio cable is not connected Default speaker is not correctly set Audio Functionality is not enabled in the Base Unit Buttons are not re paired after changing the audio setting on the web interface Connection to the display has been lost The display is switched off Wrong input is selected The display cable is not connected correctly The display does not recognize or is not able to display the Base Unit output resolution The Base Unit is in standby mode The Base Unit is powered off The Button s software is not compatible with that of the Base unit One of the displays is switched off One display cable is not connected Solution Click and hold the Button to use the Show me full screen function of ClickShare Refer to Advanced Use page
9. 0001 CLICKSHARE 21 11 2013 INDEX A About 3 5 6 8 9 Base Unit 6 ClickShare 5 ClickShare product 5 The Button 8 Tray 9 User Guide 3 About ClickShare 3 About the Tray 9 Address 30 Advanced use 15 Audio control 21 B Base Unit 6 Basic information 3 Basic Troubleshooting 27 Basic use 12 Button 8 23 Pairing 23 Button menu 18 19 Capture mode 18 Detailed 18 Fast 18 Shared desktop 19 Extended 19 Primary 19 C Capture mode 18 Detailed 18 Fast 18 Client software 18 E Environmental information 29 Disposal information 29 Rohs compliance 29 F Full screen 15 G Getting started 12 17 iOS device connection 17 Getting Started 11 R5900001 CLICKSHARE 21 11 2013 Introduction 3 5 ClickShare 5 Fonts 4 symbols 4 User Guide 3 iOS device 17 L Ledring 8 LED strips 6 Mobile Device 9 Support 9 P Pairing Buttons 23 Power off 11 Poweron 11 Problem solving 27 Production 30 R Regional versions 3 S Shared desktop 19 Extended 19 Primary 19 Standby button 6 Standby mode 11 Symbols 4 T Troubleshooting 27 U User Interface 18 V Versions 3 Index 31
10. CTS DATA GOODWILL PROFITS TURNOVER REVENUE REPUTATION OR ANY LOSS ARISING FROM WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION OF THE SOFTWARE AND ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES WHICH MAY ARISE IN RESPECT OF USE OF THE SOFTWARE EVEN IF BARCO HAS BEEN ADVISED OF THE POSSIBILITY OF THEIR OCCURRENCE YOU HEREBY AGREE TO INDEMNIFY KEEP INDEMNIFIED DEFEND AND HOLD HARMLESS BARCO AND BARCO S AFFILI ATES AND SUBSIDIARIES FROM AND AGAINST ANY AND ALL ACTIONS PROCEEDINGS LIABILITY LOSS DAMAGES FEES AND COSTS INCLUDING ATTORNEYS FEES AND OTHER EXPENSES INCURRED OR SUFFERED BY BARCO ARISING OUT OF OR IN CONNECTION WITH ANY BREACH BY YOU OF THE TERMS OF THIS SOFTWARE LICENSE You shall treat as confidential all information obtained from the other pursuant to this Software License which is marked confidential or the equivalent or has the necessary quality of confidence about it and shall not divulge such information to any persons without Barco s prior written consent provided that this Paragraph 7 shall not extend to information which was rightfully in the possession of you prior to the commencement of the negotiations leading to this Software License which is already public knowledge or becomes So at a future date otherwise than as a result of a breach of this paragraph 7 is required to be disclosed by law or which is trivial or obvious You are aware of and ensure to comply with the provisions of this paragraph 7 The foregoing ob
11. ClickShare User Guide R5900001 03 21 11 2013 Barco nv President Kennedypark 35 8500 Kortrijk Belgium Phone 32 56 23 32 11 Fax 32 56 26 22 62 Support www barco com esupport Visit us at the web www barco com Printed in China Changes Barco provides this manual as is without warranty of any kind either expressed or implied including but not limited to the implied war ranties or merchantability and fitness for a particular purpose Barco may make improvements and or changes to the product s and or the program s described in this publication at any time without notice This publication could contain technical inaccuracies or typographical errors Changes are periodically made to the information in this publication these changes are incorporated in new editions of this publication The latest edition of Barco manuals can be downloaded from the Barco web site www barco com or from the secured Barco web site https www barco com en signin Copyright All rights reserved No part of this document may be copied reproduced or translated It shall not otherwise be recorded transmitted or stored in a retrieval system without the prior written consent of Barco Barco ClickShare End User License Agreement EULA Software License PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING SOFTWARE OR HARDWARE PROVIDED TO YOU BY BARCO AS IT CONTAINS THE TERMS AND CONDITIONS BY WHICH BARCO OFFERS
12. EGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE SOFTWARE MORE INFORMATION DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE Copyright on each Open Source Software component belongs to the respective initial copyright holder each additional contributor and or their respective assignee s as may be identified in the respective documentation source code README file or otherwise You shall not remove or obscure or otherwise alter the respective copyrights You acknowledge living up to the conditions of each separate Open Source Software license In the development of the Software the following Open Source Software components have been used an updated list may be made available through the customer section of the Barco website or other online means alsa lib http www gnu org licenses gpl html alsa utils http www gnu org licenses gpl html ne 290 freetype http freetype sourceforge net FTL TXT http www gnu org licenses old licenses gpl 2 0 html libgcc1 http www gnu org licenses gpl html libgcrypt11 http www gnu org licenses gpl html http www gnu org licenses Igpl html http www gnu org copyleft fdl html libglib 2 http www gnu org licenses old licenses lgpl 2 1 html libgnutls26 http www gnu org licenses Igpl html libgpg errorO http www gnu org licenses gpl html http www gnu org licenses lgpl html http www gnu org copyleft fdl html ibpixma
13. RETIR 4n E A Z REA SRZAR EN ffi E ER B d 7 x O MEMM R5900001 CLICKSHARE 21 11 2013 _ 29 5 Environmental information Chassis BR AY ae X x Power Supply Unit X fr Vb BA E Paper Manuals 5 3 O dm VCR m8 ED pe ALB PTE MAMA PHS 38 15 46 SIT 11363 2006 KEHENRERKUT O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ T11363 2006 XRT ASE SMREL EAE PE B 3 MA AIRIS EGER EH SJ T 11363 2006 KEMENMREER X Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ T11363 2006 PHAR SAB Be SP a CEIP D 20088 ER h E A Br FP 8825 ERE PEE UA EGO HEM EE DR A SAR EFUP RE Barco MATRAMEFUPRE HSM RG in A SA Sas E A F ill EP 58 BP PARA Be SU i PUR 8 A RAR 3 amp Wi Ex HE All Electronic Information Products EIP that are sold within Chinese Mainland must comply with the Electronic Information Products Pollution Control Labeling Standard of Chinese Mainland marked with the Environmental Friendly Use Period EFUP logo The number inside the EFUP logo that Barco uses please refer to the photo is based on the Standard of Electronic Information Products Environmental Friendly Use Period of Chinese Mainland Image 5 1 Production address 30 Factory E EH ESSA Lit EE 428600 Bf 4 amp 200233 R590
14. Software Li cense is determined to be illegal void or unenforceable or if any court of competent jurisdiction in any final decision so determines this Software License shall continue in full force save that such provision shall be deemed to be deleted with effect from the date of Such decision or such earlier date and shall be replaced by a provision which is acceptable by law and which embodies the intention of this Software License a close as possible 10 You acknowledge that this Software may be subject to U S or other governments Export Jurisdiction You agree to comply with all applicable international and national laws that apply to the Software including the U S Export Administration Regulations as well as end user end use and destination restrictions issued by the U S or other governments 11 Barco shall be entitled to sub contract all or any of Barco s obligations hereunder to a third party and or any of Barco s affiliated companies 12 The construction validity and performance of this Software License shall be governed in all respects by the laws of Belgium without recourse to its conflict of law principles All disputes arising in any way out of or affecting this Software License shall be subject to the exclusive jurisdiction of the courts of Kortrijk without prejudice to enforcement of any judgment or order thereof in any other jurisdiction The United Nations Convention on Contracts for the International Sale of Goods the Co
15. a alas ze Re Re LS D 23 4 Troubleshooting rre RR RI III TIU I rax i ee eames ee KU tonne nes 27 4 1 Basic Troubleshooting 3293s 6 3 2 ane cede oes taka ed fr Pe re HE nn ne veda fn Vue 27 5 Environmental information ss nnn nnn memes n n nn nnn 29 5 1 Disposal information 5 2 Rohs compliance 5 3 Production address R5900001 CLICKSHARE 21 11 2018 Table of contents 2 DD R59 00001 CLICKSHARE 21 11 2013 1 1 1 1 Introduction INTRODUCTION Overview Versions About this guide Symbols and fonts Versions 1 2 Regional versions Depending on the location where you buy the ClickShare product the Base Unit and accessories are regionalized By the time of release of this manual 4 regional versions of ClickShare are available Europe North America China Japan The regional version of your ClickShare cannot be changed That means that you cannot use it in another region For more information on the regional variants refer to the ClickShare Installation Guide R5900004 About this guide This manual Available System documentation This guide is part of the documentation set describing the ClickShare product Article number Button Guide R5900007 Rack Mount Guide R5900008 Recycling Manual R5900009 A printed copy of the Safety Guide and Quick Start Guide is included in the ClickShare box at purchas
16. ace of the ClickShare application is left on your laptop 3 3 Advanced Use Advanced functionality ClickShare can show the content of up to four wireless sources or three wireless sources and one ClickShare Link for an iPad on the meeting room display s at the same time A wireless source is a ClickShare Button or either an iPad or android device sharing via the ClickShare app This means by clicking their Button clicking the virtual button in the ClickShare app or connecting an iOS device through the ClickShare Link four persons in the meeting room can display their screens simultaneously They appear as follows For a meeting room with a single display 1 user 2 users 3 users 4 users Image 3 9 Position on single display For a meeting room with a dual display R5900001 CLICKSHARE 21 11 2013 5 3 Getting Started 16 2 users 4 users Image 3 10 Position on Dual screen One display must support Display Port otherwise an adapter piece from display port to DVI must be used For a single display 2560x1080 Panoramic setup 1 user panoramic setup 2 users panoramic setup 4 users panoramic setup Image 3 11 For Panoramic projectors which require Dual Link DVI in use the Barco kit B5606021 to convert DisplayPort into Dual Link DVI Image 3 12 DisplayPort convertor If you are the fifth user who wants to share his screen you are blocked A message appears on your screen telling you the maximum number o
17. ake more time During the pairing and update process a message is displayed on the screen Pairing and updating Button Busy pairing and updating Pairing and updating Button Busy pairing and updating Image 3 27 Pairing message The result of the pairing process can be as follows When the LEDs become static white the Button is paired to the Base Unit but no software update was needed You can unplug the Button from the Base Unit When the LEDs become static red the Button is paired to the Base Unit and the software update has finished You can unplug the Button from the Base Unit Finished pairing and updating Button Finished pairing and updating Image 3 28 Pairing finished 2 Unplug the Button from the Base Unit R5900001 CLICKSHARE 21 11 2013 3 Getting Started Image 3 29 Unplug Button from Base Unit The Button is now ready for use 25 R5900001 CLICKSHARE 21 11 2013 3 Getting Started 26 R5900001 CLICKSHARE 21 11 2013 4 TROUBLESHOOTING 4 1 Basic Troubleshooting 4 Troubleshooting Problem solving In this chapter some problems that might occur while using ClickShare are listed For each problem possible causes are given and a solution is proposed If you cannot solve the problem yourself please contact your local IT administrator Problem Your screen is not shown on the display when pressing the Button Your screen is shown but your audio is not playing on
18. cessary parts e a ClickShare Link an HDMI cable optional an iOS device HDMI adapter or an Apple TV Connection with cable 1 Connect the iOS device HDMI convertor to your iOS device 2 Connect the ClickShare Link to the power and to a rear USB port of the Base Unit 3 Connect the HDMI port of the iOS device to the input of the ClickShare Link The content of the screen will be displayed on the meeting room screen R5900001 CLICKSHARE 21 14 2073 7 3 Getting Started 3 5 Connection via Apple TV As per the above but connect the ClickShare Link input to the Apple TV instead of the iOS device 1 Connect to the appropriate network and start sharing by enabling AirPlay mirroring For more information on how to setup consult the iOS device s user guide Note Always use AirPlay mirroring Streaming is not supported User Interface 3 6 User Interface functionality After launching the client the ClickShare icon appears in the system tray ClickShare context menu The content of the context menu is related to the operating system 1 Right click the ClickShare icon in the system tray The context menu appears Start sharing Show me fullscreen Capture more About ClickShare Client Exit Image 3 16 Context menu 2 From the list click the action you want to perform Click To Start sharing to show your screen on the display Show me fullscreen to bring the content o
19. creen with the display pairing and software update is done You can now unplug the Button from the Base Unit red blinking an error occurred off no light Q the Button is not or not properly inserted into the USB port the Button might be defective the USB port or computer might be defective 8 DD R5900001 CLICKSHARE 21 11 2013 2 Introduction to ClickShare 2 4 About the Tray Tray functionality The function of the Tray is to hold the Buttons on the table when the meeting has finished The Tray can hold up to 4 Buttons Image 2 5 Tray 2 5 Mobile Device Support Overview The below list of Apps are supported by ClickShare and can be installed on your mobile device from Google Play or Apple App Store Before you can use your mobile device with ClickShare you have to connect the mobile device Wi Fi with the ClickShare Base Unit Wi Fi Follow the instructions as given in your mobile device user guide ClickShare Presenter Android and iOS MirrorOp Sender for Galaxy Samsung Galaxy only R5900001 CLICKSHARE 21 17 2073 9 2 Introduction to ClickShare QD R59 00001 CLICKSHARE 21 11 2013 3 Getting Started 3 GETTING STARTED Overview Powering the Base Unit on and off Basic Use Advanced Use Use of an iOS device with ClickShare Link User Interface e Capture mode Shared desktop primary extended e A Audio configuration Pairing 3 1 Powering the Base Unit on and off
20. e Please check online for the other documents Always check for the latest version of the manual on www barco com clickshare Click on Visit the ClickShare product page and go to tab Downloads R5900001 CLICKSHARE 21 14 2073 3 1 Introduction 1 3 Depending on the ClickShare version some graphics might be different to the ones used in this manual This however does not have any effect to the functionality The User Guide describes how to use ClickShare It also contains a basic troubleshooting part where you can search for a solution when a problem occurs Symbols and fonts Symbol overview The following icons are used in the manual p ov Li oOo Info term definition General info about the term Note gives extra information about the described subject Tip gives extra advice about the described subject Font overview Buttons are indicated in bold e g OK e Menu items are indicated in italic Step related notes tips warnings or cautions are printed in italic Procedure related notes tips warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon R5900001 CLICKSHARE 21 11 2013 2 Introduction to ClickShare 2 INTRODUCTION TO CLICKSHARE Overview e About the ClickShare product About the Base Unit About the Button About the Tray Mobile Device Support 2 4 About the ClickShare product ClickShare sets ClickShare makes co
21. e Barco website at http www barco com en AboutBarco weee Disposal of batteries in the product BE This product contains batteries covered by the Directive 2006 66 EC which must be collected and disposed of separately from municipal waste If the battery contains more than the specified values of lead Pb mercury Hg or cadmium Cd these chemical symbols will appear below the crossed out wheeled bin symbol By participating in separate collection of batteries you will help to ensure proper disposal and to prevent potential negative effects on the environment and human health Rohs compliance Turkey RoHS compliance BE T rkiye Cumhuriyeti AEEE Y netmeli ine Uygundur Republic of Turkey In conformity with the WEEE Regulation rh EI X Fi RoHS Chinese Mainland RoHS Ti d rb ERU RE THE ET MS SR PEU ES XR ZR FN REL RE ROHS LT 8823 3 T Barco s rh RES MA TL SU ED ERES ERROR ES RES RE RoHS TR 8 a A TE rh SHE RP MU SBMCV EE ES RU RRASMRMREZRR E According to the China Administration on Control of Pollution Caused by Electronic Information Products Also called RoHS of Chinese Mainland the table below lists the names and contents of toxic and or hazardous substances that Barco s product may contain The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China in the section Limit Requirements of toxic substances in Electronic Information Products SEMA PS ASREMM
22. efresh of drives Bad connection at USB port on laptop Windows tries to assign the ClickShare drive to an already reserved drive letter Use of overlays 3D or hardware acceleration in the GPU Solution Refresh the view on your laptop Reconnect to the USB port Try another USB port Reboot your laptop Use Microsoft Windows Disk Management to assign it to a free drive letter Disable overlays or hardware acceleration in the GPU Disable AeroGlass in Windows 7 Capture mode R5900001 CLICKSHARE 21 11 2013 5 5 1 5 Environmental information ENVIRONMENTAL INFORMATION Disposal information 5 2 Disposal Information Waste Electrical and Electronic Equipment IEEE This symbol on the product indicates that under the European Directive 2012 19 EU governing waste from electrical and electronic equipment this product must not be disposed of with other municipal waste Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources For more information about recycling of this product please contact your local city office or your municipal waste disposal service For details please visit th
23. er are entitled to i sell or grant a security interest in the Software to other parties in any way or to rent lease or sub license the Software to others without the express prior written consent of Barco or ii exploit the Software or any of its component parts for any commercial purpose other than use by you and or Authorized Users of the Software Neither you nor any Authorized User may whether in whole or in part copy translate reverse engineer derive source code from modify disassemble decompile create derivative works based on the Software or remove any proprietary notices or labels on the Software save as may be permitted by law or this Software License without the prior consent in writing of Barco 3 Barco and Barco s licensors as appropriate retain ownership of all intellectual property rights in the Software and any copies you or any Authorized User may make of such Software The Software is protected by national copyright laws international copyright treaties and conventions and other applicable laws All rights not expressly licensed to you in this Software License are reserved to Barco and Barco s licensors as appropriate The Software contains certain other licensed materials and Barco s licensors may protect their rights in the event of any violation of this Software License Barco shall hold you harmless defend and indemnify you from and against direct damages losses and expenses arising from in fringement or a
24. f users being displayed simultaneously has been reached You can decide to wait until one of the four users removes his content from the display or you can decide to show your content full screen In that case the four screens that were being displayed are removed and your screen is displayed full screen To show your content on the display full screen 1 Click and hold the Button for 2 seconds R5900001 CLICKSHARE 21 11 2013 3 Getting Started Your content is shown full screen on the display If other persons were sharing their content on the display their screens are removed Their Button s LEDs are now shining white again 1 2 4 users user 5 Image 3 13 Single display 4 users user 5 Image 3 14 Dual display Image 3 15 Panoramic display When you click again your content is removed and the Base Unit shows the welcome screen again The content of the previous users is not restored on the display 3 4 Use of an iOS device with ClickShare Link About using an iOS device with ClickShare Link The content of the iOS device touchscreen can be displayed on the large meeting room display s as one of the possible sources The optional ClickShare Link must be installed in the meeting room before an iOS device can participate by sharing its screen con tent For more information about the physical installation of ClickShare Link in combination with an iOS device consult ClickShare s installation guide R5900004 Ne
25. f your screen on the display full screen Capture mode to choose to capture video with more slower performance or less detail faster performance Shared desktop only for Windows and Windows8 About ClickShare Client to select primary or extended desktop to find out the ClickShare software version Exit to close ClickShare Capture mode Result The LEDs of your Button become red The screens of other users that were shown on the display disappear Tune video performance and quality Depending on the selection the primary or the extended display is displayed Here you can find more information on the ClickShare software version The ClickShare icon disappears from the system tray and the LEDs of the Button start blinking white 18 Only for Windows XP and Windows 7 About capture mode ClickShare is optimized for optimum video performance Upon starting the client software it will disable Win7 Aero Glass to maximize video performance Upon quitting the ClickShare applications your Aero Glass settings will be restored Transparent alpha layers on WinXP and Win7 are by default not captured Therefore some windows may not be shown or may appear different on screen For example content of video players using overlays will not be shown With Capture More selected Win7 Aero Glass settings will be restored and capturing of alpha layers is enabled In this mode video throughput may decrease a bit a
26. g room display Image 3 20 PC with two extended screens connected The first extended screen screen 2 will always be captured and displayed on the meeting room display To know if your system supports the extended desk top feature press Window key P It should bring up the following pop up on screen Computer only Duplicate Extend Projector only Am m mm ya Image 3 21 How to select 1 Right click on the ClickShare icon in the system tray 1 R5900001 CLICKSHARE 21 11 2013 3 Getting Started Visibly yours Capture Mode Shared Desktop y Primary About CligeShare Client Extended Start sharing Show me fullscreen ill LN 2 07 2013 Image 3 22 Shared desktop selection A context menu opens 2 Select Shared Desktop 2 3 Select the desired setting 3 Primary the primary PC screen is displayed on the meeting room display Extended always the secondary screen is displayed on the meeting room display Known issue Virtual Extended Desktop not supported on some Windows7 and Windows8 systems due to a problem in recent versions of the AMD graphical driver Downgrade to an older version of the driver might resolve the issue 3 8 Audio configuration Audio configuration The audio signals from the different users are mixed in the Base Unit to one output signal Each connected user must control his own audio signal using the audio configuration of his computer If he does no
27. haser can demand a reduction in the purchase price or cancellation of the contract All other claims in particular those relating to compensation for direct or indirect damage and also damage attributed to the operation of software as well as to other services provided by Barco being a component ofthe system or independent service will be deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco or if the goods are handled incorrectly in particular if the systems are commissioned operated incorrectly or if after the transfer of risks the goods are subject to influences not agreed upon in the contract all guarantee claims of the purchaser will be rendered invalid Not included in the guarantee coverage are System failures which are attributed to programs or special electronic circuitry provided by the purchaser e g interfaces Normal wear as well as normal maintenance are not subject to the guarantee provided by Barco either The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by the customer EN55022 CISPR22 Class A ITE Information Technology Equipment Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class
28. he system is shut down a long push or short push triggers the system to start up R5900001 CLICKSHARE 21 11 2013 11 7 2 Introduction to ClickShare 2 3 About the Button Button functionality By default the ClickShare Set comes with four Buttons A Button contains three main functional components Image 2 4 The Button 1 USB connector 2 Button 3 LED ring Table 2 5 Handle the Button cable with care Rough handling might cause defects USB connector Using the USB connector the Button can be plugged into a laptop for sharing your screen or in the Base Unit for pairing the Button to the Unit or updating its software Button Click the Button to display the content of the laptop s screen on the meeting room display Clicking the Button during the meeting will toggle the sharing of the screen Holding the Button for 2 seconds brings the content of the laptop s screen as full screen on the meeting screen removing other sources currently displayed LED ring The LED ring indicates the current status of your ClickShare LEDs behavior Explanation white blinking the Button is plugged in the laptop and initializing or waiting for the user to start the ClickShare application pairing software update of the Button in the Base Unit is in progress static white ClickShare is ready to start sharing your screen pairing is done You can now unplug the Button from the Base Unit static red c sharing your s
29. ligations as to confidentiality shall survive any termination of this Software License You will remain responsible for the maintenance of your hardware operating system the functioning of your network and in keeping your systems virus free You acknowledge that the Software is a complex computer software application and that the performance thereof may vary depending hardware platform software interactions and configuration You acknowledge that the Software is not designed and produced specifically to meet your specific requirements and expectations and the selection of the Software by you is entirely your own choice and decision For the avoidance of doubt nothing in this Software License shall impose any obligation on Barco to provide support services on the Software or any other hardware or software product 9 This Software License is the only understanding and agreement between you and Barco for use of the Software by you and or Autho rized Users The Software License supersedes all other communications understandings or agreements we had prior to this Software License with the exception of any continuing confidentiality agreement although nothing in this Software License purports to exclude liability for fraudulent misrepresentation You may not export or re export the Software or any copy or adaptation in violation of any applicable laws or regulations This Software License shall not be altered amended or varied If any provision of this
30. lleged infringement of any patent trademark or copyright of such third party by the license and the right to install the Software as permitted by this Software License and settle at its sole expense any amounts awarded in a final judgment or settlement resulting therefrom under the condition that i you promptly notify Barco in writing after a claim has been asserted against you or the commencement of any claim action suit or proceeding whichever is the earlier and ii Barco shall be allowed to assume sole control of the defense and any settlement negotiations related to any claim action suit or proceeding and iii you shall not negotiate settle or compromise any claim action suit or proceeding without the prior written consent of Barco and iv you at your cost shall cooperate with Barco and provide assistance and support as may reasonably be required by Barco in connection with the defense and any settlement negotiations related to any claim action suit or proceeding Barco shall have no indemnity obligation for any Software or any portion thereof i that is based on specifications drawings models or other data furnished by you or ii that is not provided by Barco or iii that is modified in spite of the prohibition for you to modify the software or iv to the extent that you continue allegedly infringing activity after having been provided modifications that avoid the alleged infringement or v where the use of the Software o
31. mation we receive from you through the use of the Software For the benefit of the business purposes of Barco and or its affiliates In order to provide maintain protect and or improve the Software and to develop new software For administration of the relationship between you your organization and Barco and or its affiliates For any other legitimate purpose including i direct marketing purposes from Barco its affiliates or selected third parties and ii allowing third parties to provide services to you related to the Software if required to do so by law or in a good faith belief that such access preservation or disclosure is reasonably necessary to Satisfy any applicable law regulation legal process or enforceable governmental request Enforce this Software License including investigation of potential violations hereof Detect prevent or otherwise address fraud security or technical issues including without limitation the filtering of spam Protect against imminent harm to the rights property or safety of Barco its users or the public as required or permitted by law Barco shall not process any sensitive information whatsoever including but not limited to medical information You understand that the technical processing and transmission of or by the Software including your content may involve Transmissions over various networks Changes to conform and adapt to technical requirements of connecting net
32. n 1 0 http changelogs ubuntu com changelogs pool main p pixman pixman_0 10 0 Oubuntu1 libpixman 1 0 copyright ibpng12 0 http www libpng org pub png src libpng LICENSE txt ibpoptO http opensource org licenses MIT Open Source component ibstdc 6 ibtalloc2 ibxml2 ibz1 ighttpd msensors ogrotate makedevs memtest86plus mesa module init tools modutils monit ncurses netbase openssh sftp server openssl opkg pciutils perl php procps read edid rgb rockbox imxtools rsyslog splashutils strace Sysfsutils sysvinit tcpdump ttf arphic uming ttf dejavu common ttf dejavu sans mono ttf dejavu sans ttf sazanami gothic ttf sazanami mincho ttf un fonts http www gnu org licenses gpl html http www gnu org licenses gpl html http opensource org licenses MIT http www gnu org licenses gpl html http www gnu org licenses gpl html http perldoc perl org perlartistic html http opensource org licenses BSD 3 Clause http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses gpl html http opensource org licenses MIT http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses old licenses gpl 1 0 html E http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses old licenses gpl 2 0 html http opensource org licenses BSD 3 Clause Open Source compo
33. na Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device FCC RF Radiation Exposure Statement This device is capable of operating in 802 11a mode For 802 11a devices operating in the frequency range of 5 15 5 25 GHz they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite Services MSS in the US WIFI Access Points that are capable of allowing your device to operate in 802 11a mode 5 15 5 25 GHz band are optimized for indoor use only If your WIFI network is capable of operating in this mode please restrict your WIFI use indoors to not violate federal regulations to protect Mobile Satellite Services Base Unit FFC ID RYK WPEA 121N Button FCC ID 2AAED CLSBTN Compliance Anatel Brasil 1 Este produto est homologado pela Anatel de acordo com os procedimentos regulamentados pela Resolu o n 242 2000 e atende aos requisitos t cnicos aplicados incluindo os limites de exposi o da taxa de absor o espec fica refe
34. nd more details will be captured Default setting Not checked R5900001 CLICKSHARE 21 11 2013 3 Getting Started How to change 1 Right click on the ClickShare icon in the system tray 1 Start sharing Start sharing Show me fullscreen Show me fullscreen Capture more Capture more Shareg Pesktop Shared Desktop Abo ClickShare Client Abou Choi Een Exit 1 Image 3 17 Change capture mode A context menu opens 2 Click Capture mode to toggle Checked capture with more details but may have a lower performance Not checked capture will be faster but may lose some of the details 3 7 Shared desktop primary extended Only for Window7 and Windows8 About shared desktop Depending on your selection your primary screen or your extended screen will be captured and displayed via ClickShare That extended screen can be a physical screen or a virtual screen With extended desktop you can take advantage of both your laptop screen and the central meeting room display Presentation notes or other material on primary screen will not be displayed to everyone PC with virtual extended screen 1 ff 0 Image 3 18 Primary screen displayed on the PC extended screen displayed on the meeting room display R5900001 CLICKSHARE 21 11 2013 nmm S 3 Getting Started 20 Image 3 19 PC with one extended screen connected That extended screen will be captured and displayed on the meetin
35. nent Open Source License http www gnu org licenses old licenses gpl 2 0 html update modules http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses old licenses gpl 2 0 html http www gnu org licenses old licenses gpl 2 0 html util linux ng http www gnu org licenses gpl html x http opensource org licenses MIT http www gnu org licenses gpl html Trademarks Brand and product names mentioned in this manual may be trademarks registered trademarks or copyrights of their respective holders All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers Guarantee and Compensation Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee On receipt the purchaser must immediately inspect all delivered goods for damage incurred during transport as well as for material and manufacturing faults Barco must be informed immediately in writing of any complaints The period of guarantee begins on the date of transfer of risks in the case of special systems and software on the date of commissioning at latest 30 days after the transfer of risks In the event of justified notice of complaint Barco can repair the fault or provide a replacement at its own discretion within an appropriate period If this measure proves to be impossible or unsuccessful the purc
36. nnecting to the meeting room s video system a matter of clicking a Button This one click wonder not only helps the presenter get the presentation on screen in a second but it also allows the other people in the meeting to participate more actively The result is enhanced meeting efficiency and better decision making At the moment 4 different sets are available on the market Each set is sold in its specific region and it can only be used in that specific region Components ClickShare set A standard ClickShare set consists of a Base Unit a Tray and 4 Buttons Depending on the location where you buy the product the software of the Base Unit is different If needed you can buy additional Buttons and Trays Image 2 1 ClickShare main components 1 Base unit 2 Button 3 Tray Accessories included Depending on the country where you buy the product the following regionalized accessories are also included in the ClickShare box Regional version Contains Accessories included R9861005EU R9861006BEU power cables CEE7 and BS 1363 4x R9861006D01 wall ceiling mounting brackets R9861006T01 e a DVI to VGA converter R5900001 CLICKSHARE 21 11 2013 1 5 2 Introduction to ClickShare Regional version Contains Accessories included R9861005JP R9861006BJP power cable JIS C8303 4x R9861006D01 wall ceiling mounting brackets R9861006T01 a DVI to VGA converter R9861005CN R9861006BCN power
37. nt Image 3 6 Windows environment 4 Double click the ClickShare application 14 D R5900001 CLICKSHARE 21 11 2013 3 Getting Started The ClickShare client software starts and its icon appears in the system tray On a Windows computer On a Macintosh C When the system is ready for use a message appears close to the systray icon Ready to share Image 3 8 The LEDs of the Button are static white 5 To share your screen on the display click the Button The LEDs of the Button become static red and your screen appears on the display When audio is enabled on the ClickShare Base Unit the audio of your laptop is also available on the audio output of the Base Unit and it will be played via the meeting room audio system The icon return to the same state as in step 4 In the system tray the ClickShare icon starts rotating On Windows computers the icon changes into C The name of the user logged on to the laptop which is sharing its content is briefly shown in the bottom left corner of the added content ClickShare automatically scales the content of your screen to the resolution of the meeting room display The aspect ratio of your screen is maintained to make sure the proportions are correct 6 To remove your content from the display click the Button again The LEDs of the Button become static white 7 When leaving the meeting room unplug the Button from your laptop and put it back in the Tray No tr
38. nvention shall not apply to this Software License however if the Convention is deemed by a court of competent jurisdiction to apply to this Software License Barco shall not be liable for any claimed non conformance of the Software under Article 35 2 of the Convention Trademarks Software License Terms Brand and product names mentioned in relation to the Software may be trademarks registered trademarks or copyrights of their respective third party holders All such brand and product names mentioned in relation to the Software serve as comments or examples and are not to be understood as advertising for the products or their manufacturers Privacy Policy You acknowledge and agree that the Software is gathering technical information about the functionality of the products which are connected through the Software Functional Information and that Barco may make use of such Functional Information with the exclusion of any personal data for any reason Barco sees fit including but not limited to providing services to you your organization allowing third party to access to such Functional Information and or to provide services to you your organization You hereby explicitly give consent that Barco may gather access preserve and or disclose the personal data you provide to us e g connected with your account allowing for the gathering of Functional Information as well as any content associated with that account as well as personal infor
39. pr sent metteur radio peut fonctionner avec une antenne d un type et d un gain maximal ou inf rieur approuv pour l metteur par Industrie Canada Dans le but de r duire les risques de brouillage radio lectrique l intention des autres utilisateurs il faut choisir le type d antenne et son gain de sorte que la puissance isotrope rayonn e quivalente p i r e ne d passe pas l intensit n cessaire l tablissement d une communication satisfaisante Le pr sent metteur radio 4104 A AR5BHB116 a t approuv par Industrie Canada pour fonctionner avec les types d antenne num r s ci dessous et ayant un gain admissible maximal et l imp dance requise pour chaque type d antenne Les types d antenne non inclus dans cette liste ou dont le gain est sup rieur au gain maximal indiqu sont strictement interdits pour l exploitation de l metteur Type Dipole Gain maximum 2 dBi Imp dance 50 Ohm NCC Statement CHARA ZEW SHAS IFA OF DS Uh FELIS AGE SBA MAW SMS SR I S REESE RIRE CNEKAERLRARARERMRSRT RADE ERATEN EUER U ERTERHE BAGH MAARRE HKRECERECRLRREME EURNMENATRAREENT HARER ERENT ERR WZ TE J amp EE CCAF11LP0930T5 t fE CCAJ13LP1890T2 KCC Statement S 34S KCC RMM BVY CLICKBASE JIAN S dal SAG OLY SAAIARS PA 7 244 CLICKSHARE BASE 7 7 z Mo lS He 42 B lSu s ATH AR5BHB116 2 ul 7 7 9F 20 cm 0 amp SAHA AFS SEA 7 SHEH CH 5 4 KCC CRM BVY CLICKBUTTON JAMS SE amp S amp
40. r the combination or thereof with other Software processes or materials or the distribution thereof rather than the Software itself is the primary cause of an alleged infringement In case it has been determined by a finally awarded judgment that Barco infringed or misappropriated such third party rights or earlier at Barco s discretion it may at its option and cost i modify the Software in such a way that it shall not infringe upon or misappropriate the rights of the third party or ii obtain for you a license or other right to use the rights allegedly infringed or iii replace the Software in question with non infringing Software The remedies set forth in this paragraph shall constitute your sole and exclusive remedy and Barco s sole and exclusive liability for a third party claim that the Software infringes or misappropriates any intellectual property right of a third party The duration of this Software License will be from the date of your acceptance as set forth above of the Software whereby you ac knowledge that use of the Software implies acceptance with no termination date unless otherwise specified You may terminate this Software License at any time by destroying all copies of the Software then in your possession and returning all associated materials and documentation to Barco or the appointed Barco reseller that sold or provided these to you Barco may terminate this Software License forthwith by informing you at any time if you and
41. r the selected device The selected device has no output controls 5 Output volume m er Mute M Show volume in menu bar Image 3 25 Speakers ClickShare default 2 Click on the Speaker icon 3 The Sound window opens 3 Select the Output tab 4 and activate ClickShare 5 Pairing Pairing of the Buttons with the Base Unit To be able to use a Button it should be assigned to the Base Unit you are using This process is called pairing By default the four Buttons delivered with the ClickShare set are already paired to the specific Base Unit In case you buy additional Buttons or when a Button should be assigned to another Base Unit the Button needs to be paired again When updating the Base Unit software it is advised to also pair your Buttons with the Base Unit to update their software R5900001 CLICKSHARE 21 11 2013 23 3 Getting Started 24 A Button can only be paired to one Base Unit at a time 8 The Button will always make connection to the Base Unit it was last paired to To pair a Button to the Base Unit 1 Insert the Button in the USB port at the front of the Base Unit you are using Image 3 26 Inserting Button into the Base Unit Both the LEDs of the Button and the LEDs of the Base Unit are blinking white This means pairing is in progress The Base Unit automatically checks whether the software of the Button is up to date If not the Base Unit updates the Button software This may t
42. rente a campos el tricos magn ticos e eletromagn ticos de radiofreq ncia de acordo com as resolug es n 303 2002 e 533 2009 Para maiores informa es consulte o site da Anatel www anatel gov br 2 Este equipamento opera em car ter secund rio isto n o tem direito a prote o contra interfer ncia prejudicial mesmo de esta es do mesmo tipo e n o pode causar interfer ncia a sistemas operando em car ter prim rio Canada Industry Canada IC Notices This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Radio Frequency RF Exposure Information The radiated output power of the Barco Wireless Device is below the Industry Canada IC radio frequency exposure limits The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized Base Unit IC ID IC 4104 A AR5BHB116 Button IC ID 9393B CLSBTN IC Antenna statement Under Industry Canada regulations this radio transmitter may only operate using an antenna of a type and maximum or lesser gain approved for the transmitter by Industry Canada To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent i
43. rms 1 This Software License is between you and BARCO NV a corporation organized and existing under the laws of Belgium registered under number BE 0473 191 041 Commercial Companies Register of Kortrijk having its registered office President Kennedypark 35 at B 8500 Kortrijk Belgium Barco for the use of the Software You hereby undertake to inform all users authorized by you to make use of the computing device on which the Software is loaded in stalled Authorized Users of the terms of this Software License and to bind all Authorized Users to accept all such terms of this Software License as applies to them 2 Barco grants you a limited non exclusive non assignable non transferable user license without the right to grant sublicenses Unless specifically agreed upon otherwise between you and Barco or unless specifically allowed by the Software or its DRM man agement itself i the license under this Software License applies to one 1 copy of the Software to be used on one single computing device and ii installation on a computing device that may be concurrently accessed by more than one user shall not constitute a permitted use and a separate license is required for each active user connected to a computing device on which the Software is being used You and Authorized Users are entitled to use the Software for the purposes and in the manner set out in this Software License and documentation but neither you nor any Authorized Us
44. sotropically radiated power e i r p is not more than that necessary for successful communication This radio transmitter 4104 A AR5BHB116 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated Antenna types not included in this list having a gain greater than the maximum gain indicated for that type are strictly prohibited for use with this device Type Dipole Maximum Peak Gain 2 dBi Impedance 50 Ohm Canada avis d Industry Canada IC Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement Informations concernant l exposition aux fr quences radio RF La puissance de sortie mise par l appareil de sans fil Barco est inf rieure la limite d exposition aux fr quences radio d Industry Canada IC Utilisez l appareil de sans fil Barco de fa on minimiser les contacts humains lors du fonctionnement normal IC ID Unit de Base 4104 A AR5BHB116 IC ID Button 9393B CLSBTN D claration d antenne d Industrie Canada IC Conform ment la r glementation d Industrie Canada le
45. t want to broadcast his audio signal he has to mute audio on his computer For some operating system it is necessary to set ClickShare as your default output device Once you unplug the Button the default setting is switched back to the previous setting Set ClickShare as default in Windows 7 1 Right click on the speaker icon in the system tray 1 R5900001 CLICKSHARE 21 11 2013 D 21 3 Getting Started 22 Open Volume Mixer Playback devices ecording devices Image 3 23 lume control options 3 Sound Playback Recording Sounds Communications Select a playback device below to modify its settings AMD DP Output AMD High Definition Audio Device Ready Speakers ClickShare Ready Speakers Headphones IDT High Definition Audio CODEC pr Device Communications Headphones IDT High Definition Audio CODEC Ready Set Default Iv Properties Speakers ClickShare default 2 Click Playback devices 2 The Sound window opens on the Playback tab 3 Select Speakers ClickShare 3 and click Set default 4 4 Click Apply or OK to activate the new setting Set ClickShare as default in Windows XP 1 Right click on the speaker icon in the system tray Image 3 24 9 Sounds and Audio Devices Properties gu Volume Sounds Audio Voice Hardware Sound playback 1 9 Default device 2 ClickShare ClickShare So
46. tandby Button Table 2 3 USB Port The USB port is used to update the software of both the Base Unit and the Buttons When plugging in the Button into the Base Unit the Button is paired to the Base Unit The Base Unit checks whether the software and firmware of the Button is up to date If not the Base Unit updates the software and or firmware Status LED strips The color of the LEDs at the front of the Base Unit give information on the status of the system LEDs behavior Explanation static red Q receiving content from the Buttons and streaming towards the display a pairing and software update of the Button is done You can now unplug the Button from the Base Unit during the first phase of the Base Unit boot process blinking white System is starting up during the second phase Button pairing is in progress software update of the Base Unit slow blinking white Q standby mode i e muting the display output static white awake and ready i e showing the welcome message on the display pairing is done red blinking an error occurred Standby button The button at the front of the Base Unit has a power on off function and a standby function When the system is awake a short push triggers the system to go into standby mode When the system is in standby mode a short push triggers the system to wake up When the system is powered on a long push makes the system to shut down and power off When t
47. undMAXHDAudo Yo Sound recording Default device V SoundMAX HD Audio Volume MIDI music playback S Default device um l Microsoft GS Wavetable SW Synth C Use only default devices Comes Speakers ClickShare default R5900001 CLICKSHARE 21 11 2013 3 9 3 Getting Started 2 Click Adjust Audio Properties 1 The Sound and Audio Devices Properties window opens 3 Select Audio tab 2 4 Click on the drop down box in the Sound playback pane and select ClickShare 3 5 Click Apply or OK to activate the new setting Set ClickShare as default on MAC 1 Click on the Apple logo on the menu bar 1 and select System Preferences 2 LS Finder File bout This Mac Software Update Edit View System Preferences Dock erences Recent Items Show All Force Quit X36 V personal Sleep CES bs B LJ 19 Q o General Desktop amp Dock Mission Language Security Spotlight Notifications Restart Screen Saver Control amp Text amp Privacy Shut Down Hardware Q CDs amp DVDs Displays Energy Keyboard Mouse Trackpad Print amp Scan Sour Saver Log Out GRUUT TE Internet amp Wireless eoo Sound 3 4 r Show All Q Sound Effects M Time Machine Accessibility Select a device for sound output Name 1 Internal Speakers 4 ClickShare Type Built in Settings fo
48. wn on the display The content of the wallpaper depends on the setup 12 D R5900001 CLICKSHARE 21 11 2013 3 Getting Started E The One i2 z Click wonder gt EE X BARCO Visibly yours Image 3 3 Starting to use ClickShare is now very simple To start using ClickShare 1 Take a Button out of the Tray Image 3 4 2 Insert the Button into a USB port of your laptop R5900001 CLICKSHARE 21 11 2013 83 3 Getting Started Image 3 5 The LEDs of the Button start flashing white On your laptop a new drive appears Two situation are possible now A launcher is preinstalled on your laptop downloaded from the Base Unit or Barco website or deployed company wide by your IT department ClickShare is immediately available You can continue with step 5 nothing is pre installed Continue with step 3 3 Browse to and double click the ClickShare drive on your laptop eoo L ClickShare si EI omom s m c a Es FAVORITES DAI My Files AirDrop y Applications L Desktop Documents Downloads EX Movies J Music Pictures GO BI covert ausser Is ClickShare for MacOSX ClickShare for Windows e ClickShare for M Volumelkconic JS mesion Volumelconiens OS app ns 3 Dropbox Ge Libraries M Computer amp System C DEVICES Remote Disc O Clickshare Sony 32GR D Image 3 7 MAC environme
49. works devices and or services You hereby explicitly give consent that Barco may export your personal data to any country worldwide especially to any country where Barco and or its affiliates have infrastructure or where a third party is making available infrastructure to Barco and or its affiliates to process personal data Barco fully adheres to the EU Directive 95 46 EC on the protection of individuals with regard to the processing of personal data and the free movement of such data as implemented in the local EU member states In accordance with these regulations you have a right of access to and rectification of your personal data You may exercise these rights by contacting Barco Open Source Software provisions This product contains software components released under an Open Source license A copy of the source code is available on request by contacting your Barco customer support representative EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE PROVIDED AS IS WITH OUT EXPRESS OR IMPLIED WARRANTY INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR BE LIABLE FOR DIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES EVEN IF ADVISED OF THE POS SIBILITY OF SUCH DAMAGES HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIA BILITY OR TORT INCLUDING N

Axor 97987000 Plumbing Product User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents