AVerMedia Technologies EB1304 NET DVR User Manual
Contents
1. 6 Chapter 2 Operating the EB1304 NET 8 2 1 Familiarizing the Remote Control 8 21 1 WSNGAD eroe eret o berb yek ye ot be tots 9 2 1 2 Using USB Backup BUOM a eo ve A 10 2 2 Using the EB1304 NET for the First Time 10 2 2 1 Setup the System Date and Time 10 2 9 dU Velldrice Scr eel cuit IM MU MIU DA 11 Playback VIGO sco pi o Ua co SWE dud 11 Chapter 3 OSD Navigation Tree eese 14 ST Men e lois eene nisus _ _ bb s y2x xpm nHH Heger mm 15 Chapter 4 Using the USB Playback Console 25 4 1 Recommended system 25 4 2 Installing the USB Playback 25 4 3 Running the USB Playback 26 4 3 1 To Cut and Save the Portion of the Recorded Video 28 4 3 2 Playback DVR Recorded File from Hard Disk 28 do Playback Backup FIle LOWE ss xoi metit opem ern esee bene keye berane he2. Show the progress of the file being played You may move the bar to seek at any location of the track Begin Move at the beginning of the recorded video file Previous Go back to the previous frame by frame Slower Play the recorded video file at the speed of 1 2X 1 4X or 1 8X Rewind Wind back the recorded video file Pause Briefly stop playing the recorded video file Play Play the recorded video file Faster Play the recorded video file at the speed of 2x 4x or 8x Next Go to the next frame by frame End Go to the end of the recorded video file Select from different screen view to playback the recorded video file of the entire camera or one camera on screen Exit Minimize the application or chose Cancel to go back to the application Minimize Cancel 27 Turn on and off the sound 17 Sound Sound bar Increase and decrease the volume 4 3 1 To Cut and Save the Portion of the Recorded Video 1 Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut Then click Segment to set the begin mark K 2 Usethe Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to end the cut Then click Segment to set the end mark To cancel segmentation click Segment button again 3 Click Output button to save the wanted portion 4 Inthe Save As dialog box locate on where user wants to save the file
3. also Chapter 8 2 Change the DVR server settings see also Chapter 8 1 1 1 933 Camera A Alarm Network 2 Only Superuser has the authority to remote setup DVR system 9 Snapshot 10 Full screen Capture and save the screen shot in bmp format Use the entire area of the screen to only display the video To return Right click the mouse or press ESC on the keyboard 36 11 Select cameras to Select to the view camera from different server In Select Camera view dialog box Display column click to enable disable viewing the camera Click Add Server and select the server type between DVR and IP Cam to add Click Delete Server to delete the selected item Click Import to load the previous saved list Click Export to save the list Click Apply All to change all the camera video quality based on the selected setting Click OK to exit 8 1 1 To Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting The setting here applies to Remote DVR only After changed the DVR system setting refresh your web browser order to apply the new setting to the DVR system 8 1 1 1 Camera Setup Camera Setup x Camera Select B B B 4 Auto Scan Video Adjustment Camera 1 Brightness 128 Contrast 128 Hue 128 Satruration ooo 128 1 Camera Select Enable disable
4. type the filename and select the video format 4 3 2 Playback DVR Recorded File from Hard Disk 1 Please have the hard disk which containing of recorded video data install on your PC or using external USB enclosure to connect to your PC Click Open File button select DVR Recorded File HD and click OK Select the hard disk drive from Select Disk window and click OK 74 GBytes IDE PiskST3800114 ie 149 GBytes IDE DiskWDC_ WD16003B 986G ak Cancel 5 And then the Event List window appears Select the event that user wants to play and click OK i Record Begin Tima End Timo B zuo 1513490 2006 04 18 13 50 33 14 07 83 2006 04 10 14 00 05 2UD JDA 1H 14300542 2005 04 18 14 13 51 OSTANA bD4xmo me D R 14 09 03 zo M38 14 11 30 2006 04 18 14 11 50 i 14 1345 SAM 14 14 1 X008 0 1 2006 09 19 14 26 20 SA 14 z 2005 09 10 14 25 23 A 14 27 21 SAS 14 27 21 STE L4 27 256 PO TM LE 14 25 46 14 255 5 SU TH 1424837 14 255 A SEVIS S01 SAM LE 14 20 72 2006 04 18 14 3X 26 2006 04 IB 14 33 07 2005 79 18 14 33 35 2n06 04 1P 14 31 79 SS TH 14 34 18 2006 04 10 14 25 25 14 38 3 2006 04 141796124 TT THe 14 37209 A SL 14 73 04 zo DA 185 14 38200 2006 04 18 14 25 06 143407 SA Te 1425 02 28 4 3 3 Playback Backup File dvr 1 Click Open File button Select Backup File dvr and click OK Locate the backup file fo
5. Any port can be assigned as an upgrade port except the ports are already used by the network services The default upgrade port is 5005 For Upgrading DVR firmware please contact your local dealer Please DO NOT cut off the power of the DVR system while the firmware is upgrading Power failure will cause the permanent damage of the DVR system Use a and CO buttons to go up and down and select UPGRADE PORT and then or 4 and gt to move to the selection Use CO buttons to change the selections values and press USB BACKUP Using USB device ex Pen drive or External Hard disk to backup partial recorded video and playback on PC Use buttons to go up and down and select USB BACKUP and then press Ca or gt Use gt to move left and right And use buttons to change the value and press Gor gt to confirm 1 Select the START TIME and END TIME 2 Select the channels which user wants to backup 3 The DVR system will display the system hard disk space and backup file size to confirm to confirm 23 OSD MENU Description USB BAKCUP TIME SET 4 And then select BACKUP EXECUTE to start START TIME 2006 05 04 10 00 01 backup video to the USB device END TIME 2006 05 05 13 08 13 BACKUP CHANNEL M1 2 M4 BACKUP SIZE 7 89MB BACKUP EXECUTE USER REMAINDER 0GB 820MB 5 When backup is done press
6. VIDEO SYSTEM MUTIPLE REMOTE REMOTE ID Description USER NETWORK The login account for remote connection through the internet User account only can view and playback recorded video by Web viewer ex Internet Explorer but no authority to change the DVR system s setting The factory default password is 111111 SET NW PASSWORD CURRENT 2K 2K K OK K k NEW 2K 2K K 2K K ok CONFIRM 2K 2K K OK K K VIDEO ADJUSTMENT Select the camera number and set to adjust the video brightness contrast hue and saturation value VIDEO ADJUSTMENT CAMERA BRIGHTNESS CONTRAST HUE SATURATION RESET TO DEFAULT VALUE DATE Set the current date TIME Set the current time AUTO RECORD Enable disable auto continue recording when interrupted i e power breakdown video playback or configuration setup It continue recording after 10 second of idleness This is applicable in Always Record mode AUTO SCAN Enable disable auto cycle switch to display the next channel when in full screen preview User can set different switch time for each channel The time range is from 5 30 seconds 17 OSD MENU SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO MUTE VIDEO SYSTEM MUTIPLE REMOTE REMOTE ID SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO MUTE VIDEO SYSTEM MUT
7. and can no longer be retrieved 19 OSD MENU SENSOR SETUP SENSOR REC TIME 010 SEC ALARM OUT TIME 010 SEC CHANNEL 1 NOT INSTALLED CHANNEL 2 NOT INSTALLED CHANNEL 3 NOT INSTALLED CHANNEL 4 NOT INSTALLED MOTION SETUP MOTION CAMERA Mi M2 M3 4 SENSITIVITIY L MOTION RECORD TIME 010 SEC NETWORK SETUP IP MODE STATIC NW ENABLE M2 M3 M4 VIDEO PORT UPGARDE PORT Description SENSOR REC TIME Set the amount of time in second to start record when the sensor has triggered ALARM OUT TIME Set the amount of time in second to continue sending the alarm once triggered CHANNEL 1 4 Customize the initial state of the attached sensor Refer to the table below to customize the sensor state NOT INSTALLED Indicates that there is no sensor connected NORMAL OPEN Indicates that the initial state of the sensor is normal open Video recording initiates when there is a changes in the sensor state NORMAL CLOSE Indicates that the initial state of the sensor is normal close Video recording initiates when there is a changes in the sensor state MOTION CAMERA Enable disable the channel number to detect motion SENSITIVITY Set the sensitivity level The sensitivity is from H High 9 2 and L Low MOTION RECORD TIME oet the amount of time in second to record when motion is detected NETWORK SETUP Setup the network parameters for the internet or intranet remote monitor or
8. any key to back to main menu USB BACKUP SUCCESS 6 To view the backup file using USB Playback Application see 4 3 Remember to plug in the USB device before starting to backup The DVR system doesn t supply the power to external hard disk Therefore the external hard disk must be power supplied by self 24 Chapter 4 Using the USB Playback Console 4 1 Recommended system requirements _ Pentium 4 2 4GHZ or above _ Windows 2000 XP _ DDR 256 MB Graphic function must support DirectDraw _ Audio card or built in Speaker 1 available USB2 0 port 4 2 Installing the USB Playback Console To install the USB Playback Console 1 Place Installation CD into the CD ROM drive When the installation main screen appears click Install USB Playback Console and then follow the on screen instructions AVerMedia AVerDiGi EB1304 NET ANZ EN install USB Playback Gonsole Remote Gonsole UTilities 4 a Browse User s Manual Si NE GF 9 install Adobe Keader 2 Select the language you prefer Select the language for this installation from ween the choices below EXIT Cancel 3 Click OK to install the application 4 Click Exit to close the installation main screen You may plug in the pen drive or external hard disk now 25 4 3 Running the USB Playback Console To run the applicat
9. between High Normal or Low 4 Record Start stop video recording 5 Network Enable disable remote system access This feature allows you to access EB DVR server from a remote location via internet connection 6 Setup Configure the Remote Console setting see also Chapter 8 2 1 7 Preview Switch to Preview Playback mode This allows you to view live camera display 8 Playback Switch to Playback mode This allows you to view the recorded video file see Chapter 8 3 9 Status Bar Display the current date time and hard disk free space 10 Camera ID Show the number of cameras that are being viewed When you are in single screen mode click the camera ID number to switch and view other camera 11 Snapshot Capture and save the screen shot either in jpg or bmp format 12 Full screen Use the entire area of the screen to only display the video To return Right click the mouse or press ESC on the keyboard 13 DirectDraw Enable disable DirectDraw function Direct Draw function supports for certain VGA card For more information please contact your VGA card vendor 44 8 2 1 To Setup Remote Console Setting Click Setup button to call out the System Setting windows Click OK to exit and save the setting and Cancel to exit without saving the setting 1 Storage Path Free Space Disk Space Used 15 58G 30 006 Language English 1 Channel Settings Cancel 1 Storage Path Set the directory
10. one when Auto Scan enables Each channel is recorded only at a maximum frame rate of 15fps User can switch to view the video in single full screen or QUAD screen Whereas in CIF mode video recording is at a lower resolution but each video is recorded in 30fps 25fps NTSC PAL User can switch to view the video in single full screen or QUAD screen VIDEO FORMAT The recorded video is in MPEG4 format RECORD FRAME RATE Set the number of frames per second to be recorded Refer to the table below for the available record frame rate settings The higher the frame rate is it uses more hard disk space CIF 120 60 40 20 4 100 48 20 4 VIDEO QUALITY Select the video quality setting from BEST HIGH MEDIUM GOOD NORMAL or LOW BEST best record quality but less record hours LOW longest record hour but quality is ordinary NORMAL allows you to record more hours but the quality of the recorded video is moderate LANGUAGE SETUP Select from the available languages 15 OSD MENU RECORD 00 01 02 06 07 08 00 01 00 02 00 03 03 04 05 00 07 00 08 00 09 00 04 00 05 00 06 SCHEDULE 00 00 00 00 00 00 00 00 00 ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC Description RECORD SCHEDULE By default in 24 hours the recording schedule is set to always record every hour Refer
11. search by condition select from the list 3 During the playback press to set the A point of video segment And then press again to set the B point of video segment On the surveillance screen will display and repeat playing the AB point video segment which user has set To cancel AB repeat press again 9 2 1 2 Using USB Backup Button User can press En button to backup the AB Repeat video file 1 Set the AB Repeat file see 2 1 1 2 Plug in pen drive or external hard disk to DVR USB BAKCUP system YES SELECT NO MENU 3 During the AB Repeat playback press S button 4 And then press CD YES to start backup file or press NO to exit backup mode The external hard disk needs to be powered by external power 2 2 Using the EB1304 NET for the First Time Upon connecting the power the unit automatically detects the status of the hard disk The hard disk must be formatted before user can use it with EB1304 NET If you are prompt to format the hard disk press e select for YES to format the hard disk and menu for NO to remain unchanged HARD DISKS INFORMATION VERSION 1 3 03 HDD CHECKING MASTER HDD SIZE 76GB 509MB HDD FORMAT YES SELECT NO MENU 2 2 1 Set up the System Date and Time Before starting record video adjust the date and time first 1 Press to call up the OSD menu and then use and CO to go up and down and select Submenu And then pressa to co
12. the Recorded Video Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut Then click Segment to set the begin mark T mm _ R 005050 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Use the Playback Control buttons drag the bar on the playback progress bar and pause on where you want to end the cut Then click Segment to set the end mark To cancel segmentation or set the segment marks from the start click Segment button again SS LL 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Click Output button to save the wanted clip In the Save As dialog box locate on where you want to save the file type the 48 filename and select the video format Save in 3 Desktop B My Documents Computer 3 My Network Places Gad Picture File name 2005 11 25 7 56 24 Save as type MPEG Files mpg Cancel MPEG Files 8 3 2 Familiarizing the Download and Playback Buttons o File 20050227 3 dvr 1 1 Progress bar Show the progress of the file being played You may move the bar to seek at any location of the track 2 Playback Begin Move at the beginning of the video file Control Buttons Previous Go back to the previous
13. user to register the domain name on AVerMedia DDNS web site To find MAC address of your DVR system follow the steps below 1 In OSD menu select NETWORK SETUP 2 Select any one of IP mode 3 ANETWORK INFORMATION windows will show up 4 MAC address of DVR system is display as shown 42 8 1 1 5 Password Change Click Remote setup button on Web Viewer main interface and then click User button to call out the Password Change interface x SuperUser Password Password Confirm Liser Password Password Confirm 1 Superuser Change the remote accessing password of super user Superuser has the authority to remote setup the DVR system configuration on Web Viewer Password Enter the new password Password Confirm Re enter password to confirm 2 User Change the remote accessing password of user Password Enter the new password Password Confirm Re enter password to confirm 43 8 2 Familiarizing the Remote Console Buttons 1 Exit Close the Remote Console 2 Audio button Enable disable the sound 3 Split Screen Mode Select from six 6 different split screen type to playback the recorded video file of all the camera or one camera over the other or alongside on a single screen f there are only 4 cameras you won t be able to switch to 9 16 and 13 split screen mode To change the video quality right click on the screen and select
14. 14 08 51 2006 04 16 14 08 56 200000418 14 09 01 SUIS 14 11 30 z0O06 04 18 14 11 30 S00 TAS 14 13 09 2006 18 14 14 13 Z DG US IB 14 15 27 z OG 04 18 14 16 08 ZUL UA BTH ee eA ee Da End Time ZULGTMJ TH 14 22 21 AUD TH TA 14 25 53 XULE 143 27 271 SUB TA S18 14 27 28 SOOKE 1B 14 28 55 Z2ODSJTH 1B 14 29 37 2008 04 18 14 30 01 2008 04 18 14 30 25 2006 04 10 14 73 75 S006 04 18 19 39 16 SOUS IB 14 36 01 SUL UATE 14737109 2005 04 18 14 36 05 ZUG 04 18 14 257 HELAAS 14 27 16 ZUOBH AR 19 27 21 SOG ALAR 14 28 46 S006 HL 19 29 08 2DD6 TH 18 14 20 53 2006 04 18 14 20 20 S006 4 18 14 33 07 S006 04 18 13 33 38 S006 04 18 14 25 25 2006 04 18 14 35 24 2006 04 18 14 38 04 2006 04 18 14 38 06 2006 04 18 14 26 07 2006 04 18 14 38 07 Use the entire area of the screen to only display the video To return press the right button of the mouse or ESC on the keyboard When you switch to full screen in multiple screen mode Left click to toggle to only display one of the video in the multiple screen mode or all Keep a portion of the recorded video see also 4 3 1 Save the segmented file in mpg or avi format see also 4 3 1 Capture and save the image either in jpg or bmp format Print the image To call out HDD Backup application See Chapter 5 To call out i Enhance application See Chapter 7 To call out ImageVerification application See Chapter 6 Display the recorded date time and play speed
15. 26 18 00 00 BACKUP CHANNEL Mi 2 M3 4 BACKUP SIZE 73G 89MB BACKUP EXECUTE 14 RECORD SCHEDULE A ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC PASSWORD SETUP SUPERUSER USER NETWORK CAMERA BRIGHTNESS CONTRAST HUE SATURATION RESET TO DEFAULT VALUE AUTO SCAN AUTO CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 PASSWORD SETUP CURRENT KK KKK NEW KK KKK CONFIRM KK KKK CURRENT NEW CONFIRM 3 1 Menu Function If the unit is currently recording the video user may have to stop video recording to change the settings Use remote control to navigate in the OSD menu The red frame turns yellow when you are making a selection MAIN MENU CAMERA SELECT RECORD SELECT RECORD MODE VIDEO FORMAT RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP MOTION SETUP NETWORK SETUP USB BACKUP LANGUAGE SETUP Mi 2 M2 ENGLISH OSD MENU Description CAMERA SELECT Enable disable the channel number to display the video on the surveillance screen RECORD SELECT Enable disable the channel number to record video The channels which could be recorded should be enabled in the CAMERA SELECT first RECORD MODE Select D1 CIF recording mode Under D1 mode the video recording is in full screen resolution and takes turns from one channel to the next
16. AVerMedia AVerDiGi EB1304 NET Operation Manual http www avermedia com http www averdigi com FCC NOTICE Class B This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept interference received including interference that may cause undesired operation Federal Communications Commission Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CAUTION ON MODIFICATIONS To comply with the limits for the Class B digital device pursuant to Part 15 of the FCC Rules this device must be installed in computer equipment certified to comply with the Class B limits All cables used to connect the computer and peripherals must be shielded and grounded Operation with non certified computers or non s
17. DNS 192 168 153 1 MAC ADDRESS 00 00 00 00 00 00 CHANGE B DHCP Assign the IP address by local DHCP server to DVR system Use buttons to go up and down and select DHCP and then pressa Or gt to make selection The DHCP Dynamic Host Configuration Protocol is a set of rules used by a communications device such as a computer router or networking adaptor to allow the device to request and get an Internet address from a server which has a list of addresses available for assignment The DVR system will try to get an IP address from the DHCP server A message window will show up as below GET IP NOW WAITING 21 OSD MENU NETWORK SETUP IP MODE STATIC NW ENABLE M2 M3 M4 VIDEO PORT UPGARDE PORT Description When DVR system gets an IP address from DHCP server the information will display as below NETWORK INFORMATION IP ADDRESS 192 168 153 100 SUB NET 255 255 255 255 GATEWAY 192 168 153 254 DNS 192 168 153 1 MAC ADDRESS 00 00 00 00 00 00 PPPOE Point to Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in Ethernet frames It is used mainly with ADSL services If your network is using ADSL service connecting to internet and then select PPPOE mode Use buttons to go up and down and select PPPOE and then pressa or gt to make selection A message window will show up as below GET IP NOW WAITING When DVR s
18. IPLE REMOTE REMOTE ID 2006 04 20 17 54 50 NO ON OFF NTSC OFF 2006 04 20 17 54 50 ON ON NO ON OFF NTSC OFF Description AUTO SCAN AUTO SCAN CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 PASSWORD SETUP Enable disable full system password protection This would prevent unauthorized user to stop video recording change system settings and formatting the hard disk AUDIO RECORD Enable disable audio recording To record sound make sure the audio input device ex microphone is connected to the unit AUDIO MUTE Enable disable to hear audio sound To hear sound make sure the unit is connected to an audio output device ex speaker If user recorded video in audio mute status there is no sound when playback The audio input and output device need to be powered by external power VIDEO SYSTEM DVR system will auto detect the video system and display MUTLIPLE REMOTE Enable disable multiple DVR system remote control When user has more than one DVR system user can use MULTIPLE REMOTE function to control all DVR system by single remote control REMOTE ID Assign the ID number for multiple DVR system remote controls When there are more than one DVR systems user can enable MULTIPLE REMOTE function and then assign REMOTE ID to each DVR system Then user can just use one remote control to control all DVR system by pressing REMOTE ID To remote control multipl
19. NTSC Record Mode CIF 120 60 40 20 4 100 48 20 4 38 4 Video Quality Select the video quality setting from BEST HIGH MEDIUM GOOD NORMAL or LOW 5 Auto Record Enable disable auto continue recording when interrupted i e power breakdown video playback or configuration setup It continue recording after 10 second of idleness This is applicable in Always Record mode under schedule setting 6 Audio Record Enable disable audio recording To record sound make sure the microphone is connected to the unit 7 Disk Overwrite Enable Enable disable replacing the earliest record when the hard disk space runs out By default the HDD overwrite setting is enabled 8 Motion Detection Motion Camera Enable disable the channel number to detect motion Motion Record Time oet the amount of time in second to record when a motion has detected Sensitivity oet the sensitivity level The sensitivity is from high 9 2 and low 8 1 1 3 Alarm Sensor Setup Alarm Setup E Mail Setup IV Wisi Alarm Enable SMTP Alarm Out Time 10 Liser ID OE 2 Sensor Setup Passwor d Sensor Status 1 Not Installed 2 Not Installed To 3 Not Installed 4 Not Installed 1 Alarm Setup Mail Alarm Enable Enable disable alarm sending mail when alarm has triggered or motion has detected 39 The Motion Detection must be enabled firs
20. Playback To use this feature first you need to select the source of the file Click the Playback button And then in the Select Playback Mode dialog box choose Local Playback to open the file that is recorded in the Remote Console and Remote Playback to open the file that is recorded in the DVR server When you choose Remote Playback select Download and Playback Cancel In the Video Playback Date Time Selection the number from 00 to 23 represent the time in 24 hour clock The numbers from 01 to 16 represent the camera number Remote Playback Date Time Selection Cancel E l l TET TT TIT TT TT E TT TTT TT S LL EL LELLLLLLLLLLIRS TET TT PTT TE To Make a Selection 1 Select the date in the calendar Use and buttons to shift the calendar to the left or right 2 In the table below click on the blue block to select and open the recorded file The blue 46 block turns red when it is selected The block that appears in white doesn t have data You can only select one block when you choose Download and Playback 3 Click OK to proceed and Cancel to void this operation 4 f you select Download Playback and after making the selection the system divides the selected hour into 16 video thumbnails In the Time Selection screen click on the video thumbnail you want to download see also Chapter 8 3 2 8 3 1 Familiarizing the Local Pla
21. RCH search by date and time 1 Use the O and Cv buttons and select START TIME 2006 05 04 10 00 01 SEARCH TIME Then press gt END TIME 2006 05 05 13 08 13 SEARCH TIME 2006 05 04 10 00 01 again to make the selection 2 In the SEARCH TIME user may now select the date and time from where you want to begin the video playback Use the 4 buttons to move the selection to the left and right Use the buttons to select the date and time Then press GD or gt again to make the selection 3 To start video playback the time in second must be set Use the gt buttons to move the selection to the right most Use the O and CO buttons and select the time in second Then press GD or EVENT LIST search by event EVENT LIST 2006 05 03 1 Use the A and CO buttons to select from 2006 05 03 the list Press GI Or gt again to make the 2006 05 03 selection User Cou gt and Cow gt to go next 2006 05 03 2006 05 03 page or back to previous page 2006 05 03 2006 05 03 2006 05 03 2006 05 03 2006 05 03 S A A B A A B S A A v Listed below are the following recording conditions A Always Recording It records non stop and automatically continue recording when interrupted S Sensor Recording It records when the sensor has triggered M Motion Recording It records when any movement has
22. amp Ven WDC W 1 37 GBytes USBSTOR Disk amp Ven 5734001 30 10 Select All Target Path To locate on where user want to save the file Event 96 Display the backup progress rate of event in percentage Total 96 Display the total backup progress rate in percentage Stop Stop backup progress Start Start backup progress Select all listed recorded video events Click the check box again to cancel for selecting all events 5 3 To Backup Recorded Video File 1 10 11 12 Please have the hard disk which was recording video on the DVR system install on your PC or using external USB enclosure to connect to your PC To run the HDD Backup application click the HDD Backup button on USB Playback Application main interface Click Browse in Source Disk to locate the recorded video file And then the Select Disk windows will appear as below Select Disk 208 GBytes LISBSTORSDisk amp ven 3 GBytes LUIGBBSTOR Disk amp ST34001 Cancel Select the hard disk drive from Select Disk windows All available hard disk will list on the Select Disk windows with size and name Select the hard disk drive and click OK And then all the recorded video files will list out Select the event which user wants to backup Or mark the Select All to select all listed recorded video event Locate on where user wants to save the backup file Click Start to process backup To stop the backup progress clic
23. ate D1 mode 60fps NTSC 50fps PAL CIF mode 120 fps NTSC 100fps PAL scheduled recording 00 00 23 00 set by hour Search for recorded video files by date time event Input Output 4 sensor inputs and 1 relay output control Multiple language operation screens 1 3 Front Panel 1 2 3 4 1 DVR Power LED X Light when the unit is power 2 HDD LED aware running state Light when the HDD is 3 IR Sensor Receive signal from the remote control to operate the unit 4 USB 2 0 Port Connect to pen drive external hard disk for backup 1 4 Back Panel 3 5 7 10 1 2 4 6 8 9 11 12 1 RJ 45 port Ethernet connection port 2 Audio In Input the audio signal from audio output device which it has a power supply by itself The audio is embedded with channel 1 The audio input device needs to be powered by external power 3 Audio Out Output the audio signal to a audio out device which it has a power supply by itself The audio output device needs to be powered by external power 4 CH1 Input the video camera signal and display it on channel 1 5 CH2 Input the video camera signal and display it on channel 2 6 CH3 Input the video camera signal and display it on channel 3 7 CH4 Input the video camera signal and display it on channel 4 8 Video Out Output the video signal to other vedio output device through BNC port The DVR unit support 2 vid
24. d video play in two windows 34 Chapter 8 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address To use this feature make sure that you PC and EB 1304 NET both are connected to the internet and the Network feature is enabled Accessing this feature for the first time you will be prompted by your browser to install WebCamxX cab allow the installation and you should be able to connect and login afterwards For Windows 2000 click Yes when the Security Warning dialog box appears Security Warning Do you want to install and run http live dss com tw WebCam cab signed on an unknown date time and distributed by AVerMedia TECHNOLOGIES Inc Publisher authenticity verified by VeriSign Class 3 Code Signing 2004 CA Caution AVerMedia TECHNOLOGIES Inc asserts that this content is safe You should only install view this content if you trust AVerMedia TECHNOLOGIES Inc to make that assertion Always trust content from AVerMedia TECHNOLOGIES Inc For Windows XP click Install when the Internet Explorer Security Warning dialog box appears Do you want ba install this colbware Mame Wiebomms cab jeg TT Wide Files From the Inbernet can Des mehu r ifle can pobencially hare your compuber inate sl tran n from publishers you Truc the risk After installing the WebCamX cab and when connecting to th
25. detected 12 B Button Recording It records when the o record button is pressed 2 he play symbol would appear beside the channel number when you are previewing in playback mode 13 Chapter 3 OSD Navigation Tree The follow figure is an OSD menu tree map To call out the OSD menu press EB on the remote control CAMERA SELECT RECORD SELECT RECORD MODE VIDEO FORMAT RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP MOTION SETUP NETWORK SETUP USB BACKUP LANGUAGE SETUP ENGLISH RECORD SCHEDULE ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC PASSWORD CHANGE VIDEO ADJUSTMENT DATE 2006 04 20 TIME 17 54 50 AUTO RECORD ON AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE VIDEO SYSTEM MULTIPLE REMOTE REMOTE ID OVERWRITE ENABLED HDi SIZE 37 GB 78MB HDi USED 16 GB 219MB 21 HD1 FORMAT SENSOR REC TIME 010 SEC ALARM OUT TIME 010 SEC CHANNEL 1 NOT INSTALLED CHANNEL 2 NOT INSTALLED CHANNEL 3 NOT INSTALLED CHANNEL 4 NOT INSTALLED MOTION SETUP MOTION CAMERA Z1 W2 M4 SENSITIVITIY HI MOTION RECORD TIME 010 SEC NETWORK SETUP IP MODE STATIC NW ENABLE 1 M2 VIDEO PORT 5001 UPGRADE PORT 5005 USER 1 SET NW PASSWORD ISB BACKUP TIME SET START 2006 09 23 17 00 02 END 2006 09
26. e DVR system you are required to enter User ID Superuser or User and password default password is 111111 and select the type of network Superuser has the authority to remote setup the DVR system configuration on Web Viewer Changing the Superuser and User default password is strongly recommended WebCam Microsoft Internet Explorer Addrana 35 8 1 Familiarizing the Web Viewer Buttons Right clicking on the Web Viewer video screen enables you to start video recording change video quality switch camera and enable disable DirectDraw 1 2 3 4 5 6 1 DirectDraw 2 Received file size 3 Camera frames 4 One screen view 5 Split screen view 6 Record 7 Remote Console 8 Remote setup Enhance the video quality Not all graphic cards can support this function If you can not see the screen display correctly or screen is messed please check with VGA card vendor Indicate the size of the data being sent per second Indicate the number of frames per second To view single camera view on screen User can right click on the screen to switch to different camera view To view 4 camera on screen simultaneously Start to record the video of the selected camera in AVI format Directly click screen to select the channel that user wants to record and press Record button Initiate Remote Console It allows you to control DVR server see
27. e DVR systems press e and number key remote ID number on the remote control 18 OSD MENU Description HARD DRIVE SETUP OVERWRITE ENABLED YES HDD SIZE 37 78MB HDD USED 0 GB 232MB 0 HDD FORMAT HDD SIZE shows the total capacity of the hard disk HDD USED shows the amount of space that has been used OVERWRITE ENABLED Enable disable overwriting the earliest record when the hard disk space runs out By default the HDD overwrite setting is enabled HDD FORMAT For security purpose you may have to enter the password to format hard disk To format hard disk 1 Use the A and buttons to go up and down and select HDD FORMAT Then press e r 2 Inthe CHECK PASSWORD screen press Or gt Then use the and CO buttons to select the security combination number Repeat till you key in the last number Also user can use the number button on the remote control to enter the password Press GD or gt button again to make the selection To move the selection to the left and right use a and CO buttons CHECK PASSWORD ENTER PASSWORD 3 After entering the last number the system will format the hard disk 4 It is done when the HDD FORMAT COMPLETED appears HARD DRIVE SETUP OVERWRITE ENABLED YES HDD SIZE 37 GB 78MB HDD USED 0 GB OMB 0 HDD FORMAT HDD FORMAT COMPLETED Formatting the hard disk will permanently delete all the records
28. eo output ports and you can only select to output the video either from the VGA OUT or VIDEO OUT 9 VGAOUT Output the video signal to a CRT or LCD monitor 10 Sensor In amp Support up to 4 sensor device and 1 relay device Relay 1A Alarm Out 125V AC 30V DC 11 TV VGA Switch Switch to select the video output Make sure to set the video output before turning on the unit 12 12V DC Connect the power adapter into this port 1 5 Setting Up the DVR Unit 1 5 1 Installing the Hard Disk The DVR unit allows user to install one hard disk Before installing the hard disk make sure to set the hard disk master jumper setting Adjust the jumper setting according to the instructions on the hard disk label For hard disk spec please referring to http www avermedia com nvd hardware recom eb c asp AN The compatible hard disks indicated in the above recommendation list only means that these commercially available hard disks were tested with AVerMedia products and functioned well under normal operation conditions AVerMedia does not guarantee or provide warranties explicitly implied or statutory with respect to the reliability of the hard disk function or its compatibility In no event AVerMedia shall be liable for damages with respect to any business interruption of clients lost profits loss of programs or other data on your information handling system or otherwise This includes direct indirect incidental special or con
29. frame Slower Play the recorded video file at the speed of 1 2x 1 4x or 1 8x Rewind Wind back the video file Pause Briefly stop playing the recorded video file Play Play the recorded video file Faster Play the recorded video file at the speed of 2x 4x or 8x Next Go to the next frame End Go to the end of the video file Name Function 3 Date Open other file 4 Output Save the segmented file in mpg or avi format 5 Print Print the screen shot 6 Save Save the screen shot either in jpg or bmp format and video in dvr format 7 Segment Keep a portion of the recorded video you want You may follow the instruction in Chapter 8 3 1 1 49 50 Appendix A Registering Domain Names DDNS Dynamic Domain Name Service is a data query service mainly used on the Internet for translating domain names into Internet addresses It allows remote clients to intelligently search dynamic servers without any previous enquiring for servers Internet addresses In order to take advantage of this intelligent service first register your domain name on the following Web site http ddns avers com tw 1 User Login Browse the website ddns avers com tw with Microsoft IE or Netscape Navigator to access the following dialog User Login Reset First input the MAC address of your DVR system and select the product name Then click OK to login or Reset to clear the previous input 2 Password Set a password to sec
30. g password Switch to CIF mode As a number key for entering password As a number key for entering password Set a playing recorded video from A point to B point segment and repeat playing on surveillance screen See 2 1 1 Pause the playing To play the video Button Function 11 Decrease the video playback at the speed of 2x 4x 8x or 16x 12 Fast play the video playback at the speed of 2x 4x 8x or 16x 13 Stop playing Stop recording 14 USB backup see 2 1 2 To move the selection to the left and right To go up and down and select the items in the menu list or change the settings To enter the OSD Main menu Exit from the main menu or sub menu display Make a selection 17 Enter sub menu 18 Start video recording 9000004 FOCUS FOCUP 2 1 1 Using AB Repeat Function o The buttons which list below are not functional for the EB1304 NET AB Repeat function allow user to set a video segment from A to B point and play on the surveillance screen until user stop User also can backup AB Repeat file to pen drive or external hard disk See 2 1 2 1 Press Cr play button to call out the SEARCH MODE menu to find the recorded video that user wants to playback 2 Select TIME SEARCH or EVENT LIST TIME SEARCH search by date and time select the date and time from AB ecHiCH2e A CH3 C where you want to begin the video playback EVENT LIST
31. g the Local Playback Buttons 4T 8 3 1 1 To Cut and Save the Wanted Portion of the Recorded Video 48 8 3 2 Familiarizing the Download and Playback Buttons 49 Appendix A Registering Domain Names 51 Chapter 1 Introduction 1 1 Package Content 3225522 1 SCA MSS 1 AVerDiGi EB1304 NET unit 3 Quick Installation Guide O O LI LI 2 Remote Control batteries included 4 Power Cord The power cord varies depending on the standard power outlet of the country where it is sold 5 Power Adapter 6 DVR accessories including 4 screws O O 7 Software CD User Manual included 1 2 Features and Specifications Non PC stand alone network digital video recorder 4 composite video inputs and 1 composite output VGA output for LCD or CRT monitor display On Screen Display OSD control menu MPEG4 video compression Auto detect NTSC or PAL video system Support Web viewer on Internet Explorer 1 Support Central Management System CMS Support remote console Support USB backup to pen drive and external hard disk Support network playback and recording simultaneously Supports 1 hard disk drive not included Full screen resolution Display 720 x 480 NTSC 720 x 576 PAL Recording 720 x 480 NTSC 720 x 576 PAL B Recording frame r
32. ge and corrosion can damage this remote control dispose of batteries safely Do not mix old and new batteries Do not mix different types of batteries alkaline standard carbon zinc or rechargeable nickel cadmium Do not dispose of batteries in a fire The batteries may explode or leak Never short circuit the battery terminals WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE PLEASE CONTACT WITH YOUR LOCAL DEALER WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION NOTICE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTIEC THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCT ONLY Table of Contents Chapter T INTFOGUGC ON un ns i CE Eso nin ae Eds b l ala kab SERE RA b HAAA 1 TP 1 1 2 Features ana 5pecifICallOriS OU TRAE RR EAM RAT UM QU T FI xa k W 1 1 3 Front Panel 2 TA BACK PANG em 2 1 9 Wp MEDY ba zz e rmn I 3 oct nstaling in Hard DIS i sus suda n n dan bana der ne n dan And n od 3 1 5 2 Connecting kk nennen nennen Ek KK KK nenas 5 1 5 3 Connecting the Sensor Relay 6 1 5 3 1 Card Sensor and Relay pinhole allocation
33. hielded cables may result in interference to radio or television reception Changes and modifications not expressly approved by the manufacturer could void the user s authority to operate this equipment European Community Compliance Statement Class B This product is conformity with the protection requirements of EU Council Directives 89 336 EEC C amended by 92 31 EEC on the laws of the Member States relating to electromagnetic compatibility Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to correct this interference DISCLAIMER No warranty or representation either expressed or implied is made with respect to the contents of this documentation its quality performance merchantability or fitness for a particular purpose Information presented in this documentation has been carefully checked for reliability however no responsibility is assumed for inaccuracies The information contained in this documentation is subject to change without notice In no event will AVerMedia be liable for direct indirect special incidental or consequential damages arising out of the use or inability to use this product or documentation even if advised of the possibility of such damages TRADEMARKS AVerMedia is registered trademarks of AVerMedia TECHNOLOGIES Inc IBM PC is a registered trademark of International Business Mach
34. ich user has assigned to DVR system It is a bitmask used to tell how many bits in octet s identify the subnetwork and how many bits provide room for host addresses Gateway Enter the network gateway IP address DNS Domain Name Server translates domain names such as www abb com tw to IP addresses It will translate the domain name into IP address when DVR system request DHCP Assign the IP address by local DHCP server to DVR system The Dynamic Host Configuration Protocol DHCP is a set of rules used by a communications device such as a computer router or networking adaptor to allow the device to request and get an Internet address from a server which has a list of addresses available for assignment PPPOE Point to Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in Ethernet frames It is used mainly with ADSL services 2 Server Port A port is using for the remote connection Any port can be assigned as a server port except the ports already used by the network services 3 DDNS DDNS Dynamic Domain Name Service is a data query service mainly used on the Internet for translating domain names into Internet addresses Users can register their own domain name on http www ddns avers com tw See 41 Appendix A Domain Name Enter the domain name that user wanted Auth Key A password use to access DDNS to register the domain name MAC address of the DVR system is the key for
35. ines Corporation Macintosh is a registered trademark of Apple Computer Inc Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation All other products or corporate names mentioned in this documentation are for identification and explanation purposes only and may be trademarks or registered trademarks of their respective owners COPYRIGHT 2007 by AVerMedia TECHNOLOGIES Inc All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form by any means without the written permission of AVerMedia TECHNOLOGIES Inc The mark of Crossed out wheeled bin indicates that this product must not be disposed of with your other household waste Instead you need to dispose of the waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment For more information about where to drop off your waste equipment for recycling please contact your household waste disposal service or the shop where you purchased the product Battery Safety Information Store the batteries in a cool dry place Do not dispose of used batteries in domestic waste Dispose of batteries at special collection points or return to point of sale if applies Remove the batteries during long periods of non use Always remove exhausted batteries from the remote control Battery leaka
36. ion click the lt Q icon on the PC desktop 1 oem 2 eei L 3 uue jj 4 Gee 5 Sea 6 7 w 8 ee 9 Cif em _ 10 E 11 7 i 12 o yet o9 DOMOM cA ee 13 16 15 14 1 Video playback screen To select the video file for playing The playback application supports dvr and avf file Select File Type File Type for Playback DYR Recorded File HD Backup File dvr Backup File avf 2 Open File Cancel DVR Recorded File HD To playback the recorded video from the hard disk which was recording video on the DVR system Also see 4 3 2 Backup File dvr The file is backup and save in dvr file format Also see 4 3 3 Backup File avf The file is backup and save in avf file format The recorded video backup to pen drive is in avf 26 4 5 6 7 8 9 10 11 12 13 15 16 Event List Full screen Segment Output Snapshot Print HDD Backup Video Enhancer Watermark Status bar Progress bar Playback Controller Split Screen Mode Exit Select the event you want to playback The event list only available when user select to playback in DVR Recorded File HD Begnrme End Time TOA 13 08 20 2006 04 18 13 50 38 2006 76 18 14 07 53 2006 04 18 14 04 09 2006 04 10 14 08 42 2006 04 18
37. k Stop To play the backup file see 4 3 3 31 Chapter 6 ImageVerification Image Verification is a watermark checking program to identify the authenticity of a saved image e g by snapshot This program can only verify uncompressed bmp image files 6 1 Run the ImageVerification 1 To run the ImageVerification application click the Watermark button on USB Playback Application main interface 2 n the ImageVerification screen click Load Source Image and locate the image source 3 Click Verify Image to begin the process 4 Check the result in the Processed Image screen If the picture is unmodified the image in the Source Image and Processed Image screen would be exactly the same If the picture is being modified a warning dialog box would prompt and the modified area is highlighted Warming image is invalid 7 BE F Load Source Image Verify Image Save Processed Image Quit About 32 Chapter 7 i Enhance The bundled i Enhance is a video editing tool and can only be used with dvr video file It allows you to adjust the video picture quality segment and save the selected portion of the video Zoom in and out the image and print or save the screen shot You can also save the setting and apply it on other files To run i Enhance application click i Enhance button on USB Playback Console interface OXO 1 2 3 4 5 6 7 8 1 O
38. lder and click OK When open the backup video file just locate the where backup file folder is 4 And then Playback Date Time Selection window appears Select the date and time and click OK Playback Date Time Selection 2006469 S e Wed Thu Fri Sat 8 9 15 16 22 23 10 ri 12 13 14 15 16 17 18 19 20 21 22 23 FHERERRRNRREN F Ep C Documents and SettingsyEBTool 29 Chapter 5 Backup Recorded Video File Recommended system requirements _ Pentium 4 2 4GHZ or above Windows 2000 XP DDR 256 MB Graphic function must support DirectDraw Audio card or built in Speaker 1 available USB2 0 port 5 2 Familiarizing with HDD Backup Application 2 EL m d sa 000590000000090 t En gt gt gt bp a m ir 0 26 12 00 00 aee 12 58 57 POEMS LO ANE OES 11 27 N O oO Sw 00 9 Function All recorded video No the list order number Record the record type see also Chapter 2 3 1 Begin Time the beginning of record time End Time the end of record time Display first frame of each recorded channel video which user had selected Show the progress of the event being played User may move the bar to seek at any location of the track To select the hard disk drive Select Disk 298 GBytes USBSTOR Disk
39. nek n eb canana 29 Chapter 5 Backup Recorded Video File 30 5 1 Recommended system 30 5 2 Familiarizing with HDD Backup Application 30 5 3 To Backup Recorded Video 31 Chapter 6 ImageVerification eee eee eere 32 6 1 To Run the ImageVerification L iu nnne 32 Chapter 7 T Enhali ce amana na n ba VAR DAD h nin Sa naa EFE SUP E A W RAYA 33 r dl sss ER SOME RR MuR S MED ME Kr aM ae 34 Chapter 8 Using the Remote Programs 35 8 1 Familiarizing the Web Viewer 36 8 1 1 To Setup Remote System 37 aitierda Selbst eiu E A entrato tuat tds 37 9c dz RECO dui A adecuadas ond etsi nins 38 8 1 1 3 Alarm Sensor SetUD kk eene nennen nennen 39 Onl Ts NEWOK OC ic etui Nuus MEN IEEE P MIU E 41 Password Changa isoen 43 0 2 Familiarizing the Remote Console Buttons 44 8 2 1 Setup Remote Console 45 9 9 Using ine Remote PISyDbaokK 46 8 3 1 Familiarizin
40. nfirm the selection 2 In Submenu select the Date and press again to make a selection And then use CO o to adjust the date and use 4 gt buttons to move the selection to the left and right 3 To adjust Time follow the above step 2 and 3 4 Press to go back to main menu after adjustment 10 2 3 Surveillance Screen To know if the channel is being recorded the e record symbol would appear beside the channel number The microphone and speaker indicate that the audio is available The information below the screen shows the current date and time recording mode record schedule setting and the percentage of the used hard disk space ar mg Pr TN a m 4 06 05 05 10 34 54 CIF A HDD 299 06 05 05 10 34 5 D1 A HDD 29 D1 mode Screen Preview CIF model Preview When you are in full screen preview press the following buttons on the remote control to switch to different channel or preview all 4 channels CH2 Camera CH3 Camera CH4 Camera QUAD CH1 2 3 4 4 Channel Camera1 2 4 Playback the Video The DVR system can record and playback video simultaneously Therefore user don t need to stop recording while playback the video 1 Press gt SEARCH METHOD TIME SEARCH 2 Use the A and CO buttons to go up and EVENT LIST down and select TIME SEARCH or EVENT LIST Then press GD or gt to make a selection TIME SEA
41. ng the Sensor Relay device The Sensor and Alarm ports enable you to connect 4 sensor inputs and 1 relay outputs Just connect the external sensor and relay pin directly to the pinhole Check the table below and locate which pinhole is assigned to sensor input and relay output 1 5 3 1 Card Sensor and Relay pinhole allocation The signal from the sensor i e infrared sensors smoke detectors proximity sensors door sensors etc is being transmitted to the unit and this triggers the system to respond and send signal to relay device i e alarm telephone etc Pin Definition m oensor 1 Ground signal sensor 1 signal 3 oensor 2 Ground signal sensor 2 signal oensor 3 Ground signal oensor 3 signal oensor 4 Ground signal sensor 4 signal Relay signal 40 Relay signal Chapter 2 Operating the EB1304 NET 2 1 Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen AVerDiGi Button 3 7 ir 01000000000000 Function A functional key for multiple DVR system remote control Switch to Channel 1 As a number key for entering password Switch to Channel 2 As a number key for entering password Switch to Channel 3 As a number key for entering password Switch to Channel 4 As a number key for enterin
42. on where to save the data When there is not enough free space to record one hour data the system automatically replaces the oldest data In case you have more than one storage path the system automatically saves the data to the next storage path By default the data is stored in C RemoteData to insert another storage path click Add To remove the selected path click Delete Enable network storage Select the Enable network storage check box to send the recorded video in network attached storage To add network storage the Internet storage drive folder must be mapped as Network Driver in DVR server To know how to assign or connect to a network drive please refer to your Windows help file and search Map Network drive 2 Language Customize the system to display the tool tips and dialogs based on the selected language By default the language is in English 3 Remote Server Enter the DVR Server IP and Server Port number 4 Channel Settings zu The numbers from 1 to 4 represent the camera ID In Fuss Transmitting Channels section enable the camera number to receive the camera signal from the server bl cre 1 M2 M3 M4 5 M In Visible Channels section enable the camera Vo io P 4 Wis V 16 lvii lv 12 13 14 15 16 number to view the camera signal on Remote 45 Console screen To select all the cameras enable the ALL check box 8 3 Using the Remote
43. pecific legal rights and you may also have other rights granted under state law These rights vary from state to state CONTACT INFORMATION Taiwan amp International No 135 Jian Yi Rd Chung Ho City Taipei Taiwan TEL 886 2 2226 3630 FAX 886 2 3234 4842 Web Site www avermedia com http www averdigi com 52
44. pen File Access dvr video file 2 Save Image Capture and save the screen shot in bmp format 3 Playback Control Begin Move at the beginning of the video file Buttons Previous Go back to the previous frame Rewind Wind back the video file Pause Temporary stop playing the video file Play Play the video file Faster Play the video file at the speed of 2x 4x or 8x Next Go to the next frame End Go to the end of the video file 4 Save Video Save the edited or segmented video in avi format 5 Print Print the screen shot 6 Segment Mark the beginning and the end of the selected portion of the video Two triangle marks will appear on the slider To cancel video segmentation click this button again 7 Zoom Buttons Enlarge reduce and set the image back to normal size 8 Full Screen Use the entire screen to only display the video 9 Default Set the video back to original state and delete all the changes in the history box 10 History Box List all the actions 33 11 Undo Delete the last action 12 Noise Reduce Adjust the softness and repair the damaged colours 13 Sharpness Improve the overall image by enhancing edges This gives the image more depth 14 Effects Gray Scale convert the image into black and white monochrome Normalize adjust the brightness intensity Equalize automatically adjust the images that are too dark De interlace smooth out the overlying frames Static de inte
45. playback IP MODE The system provides types of IP setup mode Static DHCP and PPPOE Use Cv buttons to go up and down and select IP MODE and then pressa Use and buttons to change the selections and press GD or gt to make a selection B STATIC Assigns a constant IP address for the DVR system Use buttons to go up and down and select items and then press Or gt to make selection Use 4 and gt to move left and right to select or enter the configuration value IP ADDRESS Assign a constant IP address which a real IP addresses give from ISP to DVR system SUBNET It is a bitmask used to identify the sub network and how many bits provide room for 20 OSD MENU NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT STATIC M2 M3 4 Description host addresses Enter the subnet mask of the IP address which user has assigned to DVR system GATEWAY A network device act as a passageway to internet Enter the network gateway IP address DNS Domain Name Server translates domain names such as www abb com tw to IP addresses Enter the IP address of DNS if it is available MAC ADDRESS Only for user information Don t need to enter the MAC address When all parameters are set select the CHANGE to confirm the configuration NETWORK INFORMATION IP ADDRESS 192 168 153 100 SUB NET 255 255 255 255 GATEWAY 192 168 153 254
46. rlace for motionless scene Dynamic de interlace for moving scene 15 Picture Adjust the Brightness Contrast Saturation Hue and Gamma Adjustment 16 Original Screen Display the original state of the image 17 Temporary Display the sample settings Click the sample to apply the setting Setting Block on the current video 18 Status Bar Display the date and time of the video 19 Progress Bar Show the progress of the file being played You may move the bar to seek at any location of the track 20 i Stable To reduce the jolt in the recorded video also see Chapter 7 1 21 Add Setting Include the new setting to the temporary setting block 22 Rename Change the name of the selected setting in the temporary setting block 23 Delete Permanently remove the selected setting in the temporary setting block 24 Load Setting Call the saved settings 25 Save Setting Store the settings in the temporary setting block 7 1 To Use i Stable The i Stable function can reduce the jolt in the recorded video 1 Click Open File button and select the recorded video 2 And then click i Stable button 3 i Stable windows will show up 4 Select the smoothness level i PW EN J oui 1 Low 2 3 4 and 5 High The default value is 3 5 Click Play button and then i Stable function will start to initial the recorded video 6 When the initialize is done user wil see the original and Chee arare stabilized recorde
47. rvice by someone other than the manufacturer s representative Any shipment damages Claims must be made with carrier Any other cause which does not relate to a product defect 3 Cartons cases batteries cabinets tapes or accessories used with product 4 AVerMedia does not warrant that this product will meet your requirements it is your responsibility to determine the suitability of this product for your purpose WHAT WE WILL AND WILL NOT PAY FOR We will pay labor and material expenses for covered items However we will not pay for the following 1 Removal or installation charges 2 Shipping charges 3 Any incidental charges EXCLUSION OF DAMAGES THE MANUFACTURER S SOLE OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT AT OUR OPTION THE MANUFACTURER SHALL NOT IN ANY EVENT BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM INTERRUPTION OF SERVICE AND LOSS OF BUSINESS OR LIABILITY IN TORT RELATING TO THIS PRODUCT OR RESULTING FROM ITS USE OR POSSESSION LIMITATIONS OF IMPLIED WARRANTIES There are no other oral or written warranties expressed or implied including but not limited to those of merchantability or fitness for a particular purpose Any implied warranties are limited in duration to one year from the date of purchase STATE LAW AND YOUR WARRANTY This warranty gives you s
48. sequential damages resulting from the incompatibility caused by the usage of these hard disks even if AVerMedia has expressly advised about the risk of such damages The entire risk arising out of the use of any information attached here with is borne by the recipient Follow the illustrated instructions below to install the hard disk 1 Loosen all screws 2 Push the cover backward and lift 5 Connect the end of the IDE cable 6 Secure the hard disk inside the unit and the power connector to the hard then replace unit cover disk T Push the cover forward 8 Secure the cover 9 You may now connect all the cables When the power is connected the Power LED light W turns on 1 5 2 Connecting Devices The back panel of the DVR unit user can connect up to 4 video cameras 4 sensor devices 1 alarm device and output video to a TV or CRT LCD monitor Connecting the unit to a pen drive or external hard disk through USB connection for backup then use the bundled software enables user to transfer playback and segment the video Follow the illustration below to make the connection Sensor Speaker AMANENENENEMI e 1 Power cord Power outlet eee ee eee eee 22 a CRT LCD Monitor Camera 3 e sole AN Each time you change the video display output the power must be turned off and on to reset the DVR unit 1 5 3 Connecti
49. t the alarm sending mail will send out the mail when detect motion Alarm Out Time Set the amount of time in second to continue sending the alarm once activated 2 Sensor Setup Sensor Status Customize the initial state of the attached sensor for every camera Refer to the table below to customize the sensor state Not installed Indicates that there is no sensor connected Normal open Indicates that the initial state of the sensor is normal open Video recording initiate when there is a changes in the sensor state Normal close Indicates that the initial state of the sensor is normal close Video recording initiate when there is a changes in the sensor state Sensor Record Time Set the amount of time in second to record after the sensor has been triggered 3 E Mail Setup SMTP Enter the SMTP server User ID amp Password Enter User ID and Password for e mail server user identification From Enter the sender e mail address To The recipient e mail address and separate it with a semicolon Subject Enter the message title Message Type the message 40 8 1 1 4 Network Setup Network Setup 1 staicIp DHCP PPPOE Server Port Static IF Domain Marne Auth Kev 1 IP Mode Static IP Assign a fixed and global IP address for the DVR system IP Assign a constant IP address which real IP addresses give from ISP Mask Enter the subnet mask of the IP address wh
50. the channel number to display the video on the surveillance screen 2 Auto Scan Enable disable auto cycle switch to display the next channel when in full screen preview 3 3 Video Adjustment Select the camera and adjust the Brightness Contrast Hue and Saturation of the selected camera 4 Default Value Set the video value back to default 8 1 1 2 Record Setup Record Setup Record Setup Record Select 1 2 v Record C CIF Di Record Frame Rate 04 Video Quality Best Auto Record v Audio Record Disk Overwrite Enable Motion Detection Motion Camera Motion Record Time Sensitivity 1 Record Select Enable disable the channel number to record video The channels which could be recorded should be enabled in the CAMERA SELECT first 2 Record Mode select D1 CIF recording mode Under D1 mode the video recording is in full screen resolution Each channel is recorded at a maximum frame rate of 15fps You can switch to view the video in single full screen or 4 split screen Whereas in CIF mode video recording is at a lower resolution but each video is recorded in 30fps 25fps NTSC PAL 3 Record Frame Rate Set the number of frames per second to be recorded Refer to the table below for the available record frame rate settings The higher the frame rate is it uses more hard disk space Video Standard
51. to the table below to customize the recoding condition 09 00 10 00 10 00 11 00 11 00 12 00 12 00 13 00 ALWAYS ALWAYS ALWAYS ALWAYS NO REC Disable video recording ALWAYS REC Record non stop MOTION REC Start recording when any movement is detected SENSOR REC Start recording when the sensor has triggered BUTTON REC Start recording when the record button iS pressed PASSWORD CHANGE Set a security combination number There are two type of user password SUPERUSER and USER PASSWORD CHANG SUPERUSER USER NETWORK SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE 2006 04 20 TIME 17 54 50 AUTO RECORD ON AUTO SCAN ON PASSWORD SETUP NO M 511010 ni ON AUDIO MUTE OFF VIDEO SYSTEM NTSC MUTIPLE REMOTE OFF REMOTE ID 1 Use the number button on the remote control to enter the password Or use button to the select the security combination number Press Or gt button to confirm SUPERUSER Superuser has the authority of formatting hard disk changing system settings remote monitor the DVR system and changes the system settings The factory default password is 111111 PASSWORD SETUP CURRENT 2K KKK kK K NEW Xk KK kk CONFIRM 2K 2K 2K K K k 16 OSD MENU SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE 2006 04 20 TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO MUTE
52. ure your identification Input your password 3 User Information Please provide the following user information Host Name user can choose any name he she likes except the one violence with other users Password E mail Company and Country to complete the registration process AverMedia AverMedia odysseus ms1 url cor Taiwan hd 51 Warranty Notice LIMITED WARRANTY AVerMedia TECHNOLOGIES Inc warrants this product to be free of defects resulting from faulty manufacture or components under the following terms WARRANTY LENGTH Labor is warranted for 1 one year from the date of purchase Parts are warranted for 1 one year from the date of purchase Replacement products will be warranted for the remainder of the one year warranty period or 30 thirty days whichever is longer WHO IS PROTECTED This warranty is enforceable only by the first consumer purchaser WHAT IS AND IS NOT COVERED Except as specified below this warranty covers all defects resulting from faulty manufacturing of this product The following are not covered by the warranty 1 Any product on which the serial number has been defaced modified or removed 2 Damage deterioration or malfunction resulting from Accident abuse misuse neglect fire water lightning or other acts of nature commercial or industrial use unauthorized product modification or failure to follow instructions included with the product Misapplication of se
53. yback Buttons FEDERER EE RIA ey A 09 09 6 oooc 04 05 04 07 OF 10 11 12 13 14 15 16 1 2 3 4 5 6 1 Split Screen Mode Select from six 6 different split screen type to playback the recorded video file of all the camera or one camera over the other or alongside on a single screen mode To zoom in an area on the screen Right click and Drag a square on the area you want to enlarge To back to normal view right click the channel screen again If there are only 4 cameras you won t be able to switch to 9 16 and 13 split screen 2 Progress bar Show the progress of the file being played You may move the bar to seek at any location of the track 3 Hour Buttons Select and click to playback the recorded video file on the specific time frame The Hour buttons represent the time in 24 hour clock The blue bar on top of the hour button indicates that there is a recorded video file on that period of time If there is no recorded data within the hour there will be no color bar on top of the hour button While the red bar indicates that you are currently viewing the recorded video file 4 Playback Control Buttons 5 Date Begin Move at the beginning of the recorded video file Previous Go back to the previous frame Slower Play the recorded video file at the speed of 72x 74x or vex Rewind Wind back the video file Pause Briefly stop pla
54. ying the recorded video file Play Play the recorded video file Faster Play the recorded video file at the speed of 2x 4x or 8x Next Go to the next frame End Go to the end of the video file Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file The numbers from 00 to 23 represent the time in 24 hour clock The numbers from 01 to 16 represent the camera ID While the red colored column indicates on where to start playing the recorded video file If there is no any video data it will be no color bar on top of the date button 6 Preview 7 Playback 8 Status bar 9 Camera ID 10 Output 11 Segment 12 Snapshot 13 Full screen owitch to Preview Playback mode owitch to Playback mode This allows you to view the recorded video file Display the record date time HDD capacity in preview mode and play speed in playback mode Show the number of cameras that are being viewed When you are in single screen mode click the camera ID number to switch and view other camera Save the segmented file in mpg or dvr format see also Chapter 8 3 1 1 Keep a portion of the recorded video you want see also Chapter 8 3 1 1 Capture and save the screen shot either in jpg or bmp format View in Playback compact mode To return press the right button of the mouse or ESC on the keyboard 8 3 1 1 To Cut and Save the Wanted Portion of
55. ystem get an IP address the information will display as below NETWORK INFORMATION IP ADDRESS 000 000 000 000 SUB NET 000 000 000 000 GATEWAY 192 168 153 254 DNS 192 095 000 001 MAC ADDRESS 00 00 00 00 00 00 CHANGE NW ENABLE Allow internet remote user to playback or monitor the channels Without enabling the network function the channels cannot be playback or monitor from remote site o 1is Channel 1 _ 2 is Channel 2 _ 3 is Channel 4 is Channel 4 Use CO buttons to go up and down and select NW ENABLE network enable and then pressa or 4 gt to move to the selection Use buttons to change the selections 22 OSD MENU Description NETWORK SETUP IP MODE STATIC NW ENABLE VIDEO PORT UPGARDE PORT USB BAKCUP TIME SET START TIME 2006 05 04 10 00 01 END TIME 2006 05 05 13 08 13 BACKUP CHANNEL 1 2 M4 BACKUP SIZE 73GB 89MB BACKUP EXECUTE values and press GD or gt to confirm VIDEO PORT A port for the remote connection Any port can be assigned as a video port except the ports already used by the network services The default video port is 80 Use a and CO buttons to go up and down and select VIDEO PORT and then pressa or gt to move to the selection Use CO buttons to change the selections values and press G o CO UPGRADE PORT A port for the remote update DVR system firmware
Download Pdf Manuals
Related Search