Home

ASRock ASRock 4Core1600-D800 motherboard Computer Hardware User Manual

image

Contents

1. eeennmm mmm 43 4 1 Install Operating System ssseeeeeeeeess 43 4 2 Support CD Information eeeeeee eese 43 4 2 1 Running SUPPOM CD uiii ertet 43 4 2 2 Drivers Menu cocoa sar ER CE Ep E ABRE 43 42 53 WE ON WEE 43 4 2 4 Contact Information cccccccceeecccceceeeeeeeeeeeeeeeees 43 4 Chapter 1 Introduction Thank you for purchasing ASRock 4Core1600 D800 motherboard a reliable motherboard produced under ASRock s consistently stringent quality control It delivers excellent performance with robust design conforming to ASRock s commitment to qual ity and endurance In this manual chapter 1 and 2 contain introduction of the motherboard and step by step guide to the hardware installation Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD Because the motherboard specifications and the BIOS software might be updated the content of this manual will be subject to change without notice In case any modifications of this manual occur the updated version will be available on ASRock website without further notice You may find the latest VGA cards and CPU support lists on ASRock website as well ASRock website http www asrock com If you require technical support related to this motherboard please visit our website for specific information about the model you are using www asrock com support index asp 1 1 Package Contents
2. The top of the screen has a menu bar with the following selections Main To set up the system time date information Advanced To set up the advanced BIOS features H W Monitor To display current hardware status Boot To set up the default system device to locate and load the Operating System Security To set up the security features Exit To exit the current screen or the BIOS SETUP UTILITY Use lt lt gt key or lt key to choose among the selections on the menu bar and then press Enter to get into the sub screen 25 3 1 2 Navigation Keys Please check the following table for the function description of each navigation key Navigation Key s Function Description hor Oe Moves cursor left or right to select Screens tad Moves cursor up or down to select items To change option for the selected items lt Enter gt To bring up the selected screen lt F1 gt To display the General Help Screen lt F9 gt To load optimal default values for all the settings lt F10 gt To save changes and exit the BIOS SETUP UTILITY lt ESC gt To jump to the Exit Screen or exit the current screen 3 2 Main Screen When you enter the BIOS SETUP UTILITY the Main screen will appear and display the system overview 3 COST ENS MIN NE ND d Main Advanced H W Monitor Security System Overview Use Enter TAB or SHIFT TAB to 00 09 select a field Sin Date Tue 04 22 2008 se EE BIOS Version 4Core1600 D800 P1 00 configure syst
3. 6 Line Out Lime To enable Multi Streaming function you need to connect a front panel audio cable to the front panel audio header Please refer to below steps for the software setting of Multi Streaming For Windows XP After restarting your computer you will find Mixer tool on your system Please select Mixer ToolBox K Click Enable playback multi streaming and click ok Choose 2CH or 4CH and then you are allowed to select Realtek HDA Primary output to use Rear Speaker and Front Speaker or select Realtek HDA Audio 2nd output to use front panel audio Then reboot your system For Windows Vista After restarting your computer please double click Realtek HD Audio Manager on the system tray Set Speaker Configuration to Quadraphonic or Stereo Click Device advanced settings choose Make front and rear output devices playbacks two different audio streams simultaneously and click ok Then reboot your system 11 Chapter 2 Installation 4Core1600 D800 is a Micro ATX form factor 9 6 x 8 4 24 4 x 21 3 cm motherboard Before you install the motherboard study the configuration of your chassis to ensure that the motherboard fits into it Make sure to unplug the power cord before installing or removing the motherboard Failure to do so may cause physical injuries to you and damages to motherboard components 2 1 Screw Holes Place scre
4. ASRock 4Core1600 D800 Motherboard Micro ATX Form Factor 9 6 in x 8 4 in 24 4 cm x 21 3 cm ASRock 4Core1600 D800 Quick Installation Guide ASRock 4Core1600 D800 Support CD One 80 conductor Ultra ATA 66 100 IDE Ribbon Cable One Ribbon Cable for a 3 5 in Floppy Drive One Serial ATA SATA Data Cable Optional One Serial ATA SATA HDD Power Cable Optional One ASRock 6CH UO Panel Shield 1 2 Specifications Micro ATX Form Factor 9 6 in x 8 4 in 24 4 cm x 21 3 cm Platform CPU LGA 775 for Intel Core 2 Extreme Core 2 Quad Core 2 Duo Pentium Dual Core Celeron supporting Penryn Quad Core Yorkfield and Dual Core Wolfdale processors Compatible with all FSB1600 1333 1066 800MHz CPUs see CAUTION 1 Supports Hyper Threading Technology see CAUTION 2 Supports Untied Overclocking Technology see CAUTION 3 Supports EM64T CPU Chipset Northbridge Intel G31 Southbridge Intel ICH7 Memory Dual Channel DDR2 Memory Technology see CAUTION 4 2 x DDR2 DIMM slots Support DDR2 800 667 non ECC un buffered memory see CAUTION 5 Max capacity of system memory 4GB see CAUTION 6 Hybrid Booster CPU Frequency Stepless Control see CAUTION 7 ASRock U COP see CAUTION 8 Boot Failure Guard B F G Expansion Slot 1 x PCI Express x16 slot 1 x PCI Express x1 slot 2 x PCI slots Intel Graphics Media Accelerator 3100 Pixel Shader 2 0 DirectX 9 0 Max shared memory 384MB se
5. E 29 Chipset 5 ei st CN 27 26 S 25 2 8 9 24 Le 10 TI Sum peer E D RoHS 12 23 22 21 20 19 18171615 1413 ATX 12V Connector ATX12V1 16 USB 2 0 Header USB4 5 Blue PS2 USB PWR1 Jumper 17 System Panel Header PANEL1 775 Pin CPU Socket 18 Chassis Fan Connector CHA FAN1 CPU Fan Connector CPU FAN1 19 USB 2 0 Header USB6 Blue 2 x 240 pin DDR2 DIMM Slots 20 Floppy Connector FLOPPY1 Dual Channel DDRII 1 DDRII 2 Yellow 21 DeskExpress Hot Plug Detection Header ATX Power Connector ATXPWR 1 IR1 IDE1 Connector IDE1 Blue 22 WiFi E Header WIFI E South Bridge Controller 23 Front Panel Audio Header HD AUDIO1 Flash Memory 24 PCI Slots PCI 2 Clear CMOS Jumper CLRCMOS1 25 PCI Express x1 Slot PCIE2 DE Fourth SATAII Connector SATAII 4 26 FD Jumper Secondary SATAII Connector SATAII 2 27 PCI Express x16 Slot PCIE1 Third SATAII Connector SATAII 3 28 Internal Audio Connector CD1 Black Primary SATAII Connector SATAIL 1 29 North Bridge Controller 21 3cm 8 4 in 1 PS2 USB PWR1 Chassis Speaker Header SPEAKER 1 10 1 5 ASRock 6CH UO e a O e 1 PS 2 Mouse Port Green 7 Microphone Pink 2 Parallel Port 8 USB 2 0 Ports USBO1 3 USB2 0 Ports USB23 9 VGA Port 4 RJ 45 Port 10 COM Port 5 Line In Light Blue 11 PS 2 Keyboard Port Purple
6. Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc USB Controller Use this item to enable or disable the use of USB controller USB 2 0 Support Use this item to enable or disable the USB 2 0 support Legacy USB Support Use this option to select legacy support for USB devices There are four configuration options Enabled Auto Disabled and BIOS Setup Only The default value is BIOS Setup Only Please refer to below descriptions for the details of these four options Enabled Enables support for legacy USB Auto Enables legacy support if USB devices are connected Disabled USB devices are not allowed to use under legacy OS and BIOS setup when Disabled is selected If you have USB compatibility issue it is recommended to select Disabled to enter OS BIOS Setup Only USB devices are allowed to use only under BIOS setup and Windows Linux OS 38 3 4 Hardware Health Event Monitoring Screen In this section it allows you to monitor the status of the hardware on your system including the parameters of the CPU temperature motherboard temperature CPU fan speed chassis fan speed and the critical voltage BIOS SETUP UTILITY Main Advanced H W Monitor Security Ze Enable Disable Hardware Health Event Monitoring CPU Quiet Fan Function CPU Temperature 37C 98 F M B Temperature 31 C 87F CPU Fan Speed 3400 RPM C
7. DVMT Mode Select as DVMT Mode Configuration options 128MB 256MB and Maximum DVMT The option Maximum DVMT only appears when you adopt the memory module with 1024MB or above OnBoard HD Audio Select Auto Enabled or Disabled for the onboard HD Audio feature If you select Auto the onboard HD Audio will be disabled when PCI Sound Card is plugged Front Panel Select Auto Enabled or Disabled for the onboard HD Audio Front Panel OnBoard Lan This allows you to enable or disable the OnBoard Lan feature 30 DRAM Voltage Use this to select DRAM Voltage Configuration options Auto 1 72V 1 81V 1 86V 1 90V 1 95V 1 99V 2 04V and 2 13V The default value of this feature is Auto NB Core Voltage Use this to select Northbridge Core Voltage Configuration options Auto Low and High The default value of this feature is Auto VTT Voltage Use this to select VTT Voltage Configuration options Auto Low and High The default value of this feature is Auto 1 05V Voltage Use this to select 1 05V Voltage Configuration options Auto Low and High The default value of this feature is Auto 1 50V Voltage Use this to select 1 50V Voltage Configuration options Auto Low and High The default value of this feature is Auto DRAM RCOMP Setting Use this to adjust DRAM RCOMP Setting feature Configuration options Auto and Manual The default value of this featu
8. SATA 2 SATA 4 then SATAII 1 and SATAII 3 will not work under legacy OS Windows NT you have to choose SATA 1 SATA 2 SATA 3 SATA 4 SATA 1 SATA 3 IDE 1 or IDE 1 SATA 2 SATA 4 when the installed device is used with legacy OS SATA 1 SATA 2 SATA 1 SATA 3 IDE 1 SATA 2 SATA 3 SATA 4 IDE 1 SATA 4 Master 4 Because Intel ICH7 south bridge only supports four IDE devices ss 1 SATAII 1 SATAII 2 oe E SATAII 3 SATAII 3 SATAII 4 33 IDE Device Configuration You may set the IDE configuration for the device that you specify We will use the Primary IDE Master as the example in the following instruction BIOS SETUP UTILITY Advanced Primary IDE Master Select the type SEENEN of device connected Device Hard Disk to the system Vendor 8T340014A Size 40 0 GB LBA Mode Supported Block Mode 16Sectors PIO Mode 4 Asyne DMA Multi Word DMA 2 Ultra DMA Ultra DMA 5 S M A R T Supported Select Screen EE ven Select Item 5 ST ti Sector Transfer Geen Change Option DMA Mode Auto General Help S M A R T Disabled Load Defaults 32Bit Data Transfer Enabled Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc TYPE Use this item to configure the type of the IDE device that you specify Configuration options Not Installed Auto CD DVD and ARMD Not Installed Select Not Installed to disable the use of IDE device Auto Select Auto t
9. plate onto the IHS Step 4 2 While pressing down lightly on load plate engage the load lever Step 4 3 Secure load lever with load plate tab under retention tab of load lever 14 2 4 Installation of CPU Fan and Heatsink This motherboard is equipped with 775 Pin socket that supports Intel 775 LAND CPU Please adopt the type of heatsink and cooling fan compliant with Intel 775 LAND CPU to dissipate heat Before you installed the heatsink you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation Ensure that the CPU and the heatsink are securely fastened and in good contact with each other Then connect the CPU fan to the CPU FAN connector CPU FAN1 see page 10 No 4 For proper installation please kindly refer to the instruction manuals of your CPU fan and heatsink Below is an example to illustrate the installation of the heatsink for 775 LAND CPU Step 1 Apply thermal interface material onto center Wi CES of IHS on the socket surface i ES SOLS Step 2 Place the heatsink onto the socket Ensure ET Fan cables on side fan cables are oriented on side closest to the CPU fan connector on the motherboard 17972 CPU_FAN1 see page 10 No 4 H D ce A Step 3 Align fasteners with the motherboard cara ne DE throughholes Step 4 Rotate the fastener clockwise then press down on fastener caps with thumb to install and lock Repeat with remaining fasteners 4 I
10. units of PCI clocks for PCI device latency timer register PCI IDE BusMaster Enabled Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc PCI Latency Timer The default value is 32 It is recommended to keep the default value unless the installed PCI expansion cards specifications require other settings PCI IDE BusMaster Use this item to enable or disable the PCI IDE BusMaster feature 35 3 3 6 Floppy Configuration In this section you may configure the type of your floppy drive BIOS SETUP UTILITY Advanced Floppy Configuration Select the type of __ floppy drive connected to the system Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc 3 3 7 Super IO Configuration BIOS SETUP UTILITY Advanced Configure Super IO Chipset Allow BIOS to Enable RE or Disable Floppy Controller Serial Port Address 3F8 IRQ4 Infrared Port Address Disabled Parallel Port Address 378 Parallel Port Mode ECP EPP EPP Version 1 9 ECP Mode DMA Channel DMA3 Parallel Port IRQ IRQ7 Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc OnBoard Floppy Controller Use this item to enable or disable floppy d
11. 1 1 GND see p 10 No 21 IRRX Internal Audio Connectors 4 pin CD1 CD1 see p 10 No 28 Ces CD1 Front Panel Audio Header 9 pin HD_AUDIO1 see p 10 No 23 20 This header supports the Hot Plug detection function for ASRock DeskExpress This connector allows you to receive stereo audio input from sound sources such as a CD ROM DVD ROM TV tuner card or MPEG card This is an interface for front panel audio cable that allows convenient connection and control of audio devices 1 High Definition Audio supports Jack Sensing but the panel wire on the f chassis must support HDA to function correctly Please follow the instruction in our manual and chassis manual to install your system 2 If you use AC 97 audio panel please install it to the front panel audio header as below A Connect Mic IN MIC to MIC2 L B Connect Audio R RIN to OUT2 R and Audio L LIN to OUT2 L C Connect Ground GND to Ground GND D MIC RET and OUT RET are for HD audio panel only You don t need to connect them for AC 97 audio panel E Enter BIOS Setup Utility Enter Advanced Settings and then select Chipset Configuration Set the Front Panel Control option from Auto to Enabled F Enter Windows system Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager For Windows 2000 XP XP 64 bit OS Click Audio I O select Connector Settings K Choose Disable front panel jack d
12. ASRocK 4Core1600 D800 User Manual Version 1 0 Published April 2008 Copyright 2008 ASRock INC All rights reserved Copyright Notice No part of this manual may be reproduced transcribed transmitted or translated in any language in any form or by any means except duplication of documentation by the purchaser for backup purpose without written consent of ASRock Inc Products and corporate names appearing in this manual may or may not be regis tered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners benefit without intent to infringe Disclaimer Specifications and information contained in this manual are furnished for informa tional use only and subject to change without notice and should not be constructed as a commitment by ASRock ASRock assumes no responsibility for any errors or omissions that may appear in this manual With respect to the contents of this manual ASRock does not provide warranty of any kind either expressed or implied including but not limited to the implied warran ties or conditions of merchantability or fitness for a particular purpose In no event shall ASRock its directors officers employees or agents be liable for any indirect special incidental or consequential damages including damages for loss of profits loss of business loss of data interruption of business and the like even if ASRock has been advised of t
13. Open the socket Step 1 1 Disengaging the lever by depressing down and out on the hook to clear retention tab Step 1 2 Rotate the load lever to fully open po sition at approximately 135 degrees Step 1 3 Rotate the load plate to fully open po sition at approximately 100 degrees Step 2 Insert the 775 LAND CPU Step 2 1 Hold the CPU by the edges where are marked with black lines aul xoelq aul xoelq Step 2 2 Orient the CPU with IHS Integrated Heat Sink up Locate Pin1 and the two orientation key notches Pini orientation key notch S alignment key k orientation key notch 775 Pin Socket 775 LAND CPU 13 Step 3 Step 4 For proper inserting please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket Step 2 3 Carefully place the CPU into the socket by using a purely vertical motion Step 2 4 Verify that the CPU is within the socket and properly mated to the orient keys Remove PnP Cap Pick and Place Cap Use your left hand index finger and thumb to support the load plate edge engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal 1 It is recommended to use the cap tab to handle and avoid kicking off the PnP cap 2 This cap must be placed if returning the motherboard for after service Close the socket Step 4 1 Rotate the load
14. TA SATA Either end of the SATA data cable Data Cable can be connected to the SATA Optional SATAII hard disk or the SATAII connector on this motherboard Serial ATA SATA Please connect the black end of Power Cable SATA power cable to the power Optional JE m connector on each drive Then HDD power connector f connect the white end of SATA connect to power cable to the power EE connector of the power supply supply 19 USB 2 0 Headers USB_PWR P 4 9 pin USB4 5 Ee DUMMY see p 10 No 16 1 GND P 5 P 5 USB PWR 4 pin USB6 see p 10 No 19 WS p 6 P 6 USB_PWR WiFi E Header USB 5V_2 15 pin WIFI E see p 10 No 22 Besides four default USB 2 0 ports on the I O panel there are two USB 2 0 headers on this motherboard USB4_5 header can support two USB 2 0 ports and USB6 header can support one USB 2 0 port This header supports WiFi AP function with ASRock WiFi 802 11g or WiFi 802 11n module an easy to use wireless local area network WLAN adapter It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity 4 If you don t plan to use WiFi AP functin on this motherboard this header can be used as a 4 Pin USB 2 0 header to support one USB 2 0 adt To connect the EN Thai E LR 4 Pin USB device cable to this header please refer to this picture for proper installation DeskExpress Hot Plug Detection IRTX Header de 5 pin IR
15. This controls the number of DRAM clocks for TRAS Configuration options Configuration options Auto 9 DRAM Clocks 10 DRAM Clocks 11 DRAM Clocks 12 DRAM Clocks 13 DRAM Clocks 14 DRAM Clocks and 15 DRAM Clocks Primary Graphics Adapter This allows you to select Onboard PCI or PCI Express as the boot graphic adapter priority The default value is PCI Internal Graphics Mode Select If you select Auto the onboard VGA will be automatically disabled when you install VGA card the onboard VGA will be enabled without the installation of any add on VGA card If you select Enabled 8MB or Enabled 1MB the onboard VGA will be enabled DVMT Mode Select Use this option to adjust DVMT mode Configuration options Fixed Mode and DVMT Mode The default value is DVMT Mode DVMT Dynamic Video Memory Technology is an architecture that offers breakthrough performance for the motherboard through efficient memory utilization In Fixed mode a fixed size fragment of the system memory is allocated to the graphics core In DVMT mode the graphics driver allocates memory as needed for running graphics applications and is cooperatively using this memory with other system components This item will not be used under Windows Vista OS because the driver will intelligently detect physical memory available and allocate necessary video memory DVMT FIXED Memory You are allowed to adjust the shared memory size in this item if you set
16. U may not work properly on this motherboard Please refer to below jumper settings 2 3 CO Note2 If you want to overclock the FSB800 CPU you adopt to FSB1066 on this motherboard you need to adjust the jumpers Please short pin2 pin3 for FD jumper Otherwise the CPU may not work properly on this motherboard Please refer to below jumper settings 2 3 Fo CES 18 2 8 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers Do NOT place jumper caps over these headers and connectors Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard FDD connector 33 pin FLOPPY1 see p 10 No 20 the red striped side to Pin1 Note Make sure the red striped side of the cable is plugged into Pin1 side of the connector Primary IDE connector Blue 39 pin IDE1 see p 10 No 7 connect the black end connect the blue end to the IDE devices to the motherboard 5 80 conductor ATA 66 100 cable Note Please refer to the instruction of your IDE device vendor for the details Serial ATAII Connectors These four Serial ATAII SATAII SATAII 1 see p 10 No 14 IC IC connectors support SATA data SATAI 3 SATAII 4 SATAII 2 see p 10 No 12 cables for internal storage SATAIL 3 see p 10 No 13 devices The current SATAII SATAIL 4 see p 10 No 11 9ATAIL 1 SATAII interface allows up to 3 0 Gb s data transfer rate Serial A
17. ate C1 The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support from the chipset In the C1 power state the processor maintains the context of the system caches Max CPUID Value Limit For Prescott CPU only some OSes ex NT4 0 cannot handle the function with disable This should be enabled in order to boot legacy OSes that cannot support CPUs with extended CPUID functions Intel R Virtualization tech When this option is set to Enabled a VMM Virtual Machine Architecture can utilize the additional hardware capabilities provided by Vanderpool Technology This option will be hidden if the installed CPU does not support Intel R Virtualization Technology CPU Thermal Throttling You may select Enabled to enable P4 CPU internal thermal control mecha nism to keep the CPU from overheated No Excute Memory Protection No Execution NX Memory Protection Technology is an enhancement to the IA 32 Intel Architecture An IA 32 processor with No Execute NX Memory Protection can prevent data pages from being used by malicious software to execute code This option will be hidden if the current CPU does not support No Excute Memory Protection Hyper Threading Technology To enable this feature it requires a computer system with an Intel Pentium 4 processor that supports Hyper Threading technology and an operating system that includes optimization for this technology such as Micro
18. ater use Step 3 Align the card connector with the slot and press firmly until the card is com pletely seated on the slot Step 4 Fasten the card to the chassis with screws 17 2 7 Jumpers Setup The illustration shows how jumpers are setup When the jumper cap is placed on pins the jumper is Short If no jumper cap is placed on pins the jumper is Open The il lustration shows a 3 pin jumper whose pin1 MT ET and pin2 are Short when jumper cap is placed Short Open on these 2 pins Jumper Settin Description PS2 USB PWR1 Short pin2 pin3 to enable 12 2 3 see p 10 No 2 DJ omm 5VSB standby for PS 2 5V 5VSB or USB wake up events Note To select 5VSB it requires 2 Amp and higher standby current provided by power supply Clear CMOS CLRCMOS1 2 pin jumper see p 10 No 10 2 pin jumper Note CLRCMOS 1 allows you to clear the data in CMOS The data in CMOS includes system setup information such as system password date time and system setup parameters To clear and reset the system parameters to default setup please turn off the computer and unplug the power cord from the power supply After waiting for 15 seconds use a jumper cap to short 2 pins on CLRCMOS 1 for 5 seconds 12 FD Jumper b D I FD 3 pin jumper see p 10 No 26 Default Note1 If you use a FSB1600 CPU on this motherboard you need to adjust the jumpers Please short pin2 pin3 for FD jumper Otherwise the CP
19. ble tool for changing various ATA features Please visit HITACHI s website for details http www hitachigst com hdd support download htm The above examples are just for your reference For different SATAII hard disk products of different vendors the jumper pin setting methods may not be the same Please visit the vendors website for the updates 23 2 10 Serial ATA SATA Serial ATAII SATAII Hard Disks Installation This motherboard adopts Intel ICH7 south bridge chipset that supports Serial ATA SATA Serial ATAII SATAII hard disks You may install SATA SATAII hard disks on this motherboard for internal storage devices This section will guide you to install the SATA SATAII hard disks STEP 1 Install the SATA SATAII hard disks into the drive bays of your chassis STEP2 Connect the SATA power cable to the SATA SATAII hard disk STEP3 Connect one end of the SATA data cable to the motherboard s SATAII connector STEP4 Connect the other end of the SATA data cable to the SATA SATAII hard disk 2 11 Driver Installation Guide To install the drivers to your system please insert the support CD to your optical drive first Then the drivers compatible to your system can be auto detected and listed on the support CD driver page Please follow the order from up to bottom side to install those required drivers Therefore the drivers you install can work properly 2 12 Untied Overclocking Technology This mother
20. board supports Untied Overclocking Technology which means during overclocking FSB enjoys better margin due to fixed PCI PCIE buses Before you enable Untied Overclocking function please enter Overclock Mode option of BIOS setup to set the selection from Auto to CPU PCIE Async Therefore CPU FSB is untied during overclocking but PCI PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment 4 Please refer to the warning on page 7 for the possible overclocking risk before you apply Untied Overclocking Technology 24 Chapter 3 BIOS SETUP UTILITY 3 1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY You may run the BIOS SETUP UTILITY when you start up the computer Please press lt F2 gt during the Power On Self Test POST to enter the BIOS SETUP UTILITY otherwise POST will continue with its test routines If you wish to enter the BIOS SETUP UTILITY after POST restart the system by pressing lt Ctl gt Alt lt Delete gt or by pressing the reset button on the system chassis You may also restart by turning the system off and then back on Because the BIOS software is constantly being updated the 4 following BIOS setup screens and descriptions are for refer ence purpose only and they may not exactly match what you see on your screen 3 1 1 BIOS Menu Bar
21. e CAUTION 9 5 1 CH Windows Vista Premium Level HD Audio ALC662 Audio Codec Realtek PCIE x1 LAN 8102E Speed 10 100 Ethernet Supports Wake On LAN Rear Panel 1 0 ASRock 6CH I O 1 x PS 2 Mouse Port 1 x PS 2 Keyboard Port 1 x Serial Port COM1 1 x VGA Port 1 x Parallel Port ECP EPP Support 4x Ready to Use USB 2 0 Ports 1 x RJ 45 LAN Port HD Audio Jack Line in Front Speaker Microphone Connector 4 x Serial ATAII 3 0Gb s connectors No support for RAID and Hot Plug functions see CAUTION 10 1 x ATA100 IDE connector supports 2 x IDE devices 1 x Floppy connector 1 x DeskExpress Hot Plug Detection header CPU Chassis FAN connector 24 pin ATX power connector 4 pin 12V power connector CD in header Front panel audio connector 2 x USB 2 0 headers support 3 USB 2 0 ports see CAUTION 11 1 x WiFi E header see CAUTION 12 BIOS Feature 4Mb AMI BIOS AMI Legal BIOS Supports Plug and Play ACPI 1 1 Compliance Wake Up Events Supports jumperfree AMBIOS 2 3 1 Support Support CD Drivers Utilities AntiVirus Software Trial Version Hardware CPU Temperature Sensing Monitor Chassis Temperature Sensing CPU Fan Tachometer Chassis Fan Tachometer CPU Quiet Fan Voltage Monitoring 12V 5V 3 3V CPU Vcore Microsoft Windows 2000 XP XP 64 bit Vista Vista 64 bit compliant Certifications FCC CE WHQL For detailed p
22. em Time Processor Type Intel R Core TM 2 Duo CPU E6540 2 33GHz 64bit Processor Speed 2333MHz Microcode Update 6FB B6 Select Screen Cache Size 4096KB Select Item Change Field Total Memory 1024MB Select Field DDRII 1 1024MB 333MHz DDRII667 General Help DDRII 2 None Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc System Time Hour Minute Second Use this item to specify the system time System Date Day Month Date Year Use this item to specify the system date 3 3 Advanced Screen In this section you may set the configurations for the following items CPU Configuration Chipset Configuration ACPI Configuration IDE Configuration PCIPnP Configuration Floppy Configuration SuperlO Configuration and USB Configuration 26 BIOS SETUP UTILITY Advanced H W Monitor Boot Security Advanced Settings Configure CPU WARNING Setting wrong values in below sections may cause system to malfunction gt Chipset Configuration gt ACPI Configuration gt IDE Configuration gt PCIPnP Configuration gt Floppy Configuration Ee Seen i id Select Item REG Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02 54 C Copyright 1985 2005 American Megatrends Inc FA Setting wrong values in this section may cause 4 the system to malfunction 3 3 1 CPU Configuration BIOS SETUP UTILITY Advanced Select the over c
23. etection and save the change by clicking OK For Windows Vista Vista 64 bit OS Click the right top Folder icon vs choose Disable front panel jack detection and save the change by clicking OK System Panel Header hs This header accommodates PWRBTN A 9 pin PANEL 1 GND several system front panel see p 10 No 17 functions DUMMY RESET GND HDLED HDLED Chassis Speaker Header Please connect the chassis 4 pin SPEAKER 1 gew i speaker to this header DUMMY see p 10 No 15 15V Chassis Fan Connector Please connect a chassis fan 8 pin CHA FAN1 cable to this connector and see p 10 No 18 Eu match the black wire to the CHA FAN SPEED ground pin CPU Fan Connector Please connect a CPU fan cable 4 pin CPU FAN1 uon to this connector and match CPU FAN SPEED i Fan speeb contro the black wire to the ground pin P OM ch see p 10 No 4 4 Though this motherboard provides 4 Pin CPU fan Quiet Fan support the 3 Pin CPU fan still can work successfully even without the fan speed control function If you plan to connect the 3 Pin CPU fan to the CPU fan connector on this motherboard please connect it to Pin 1 3 Pin 1 3 Connected 3 Pin Fan Installation ATX Power Connector Please connect an ATX power 24 pin ATXPWR1 supply to this connector see p 10 No 6 Though this motherboard provides 24 pin ATX power connector 4 amp it can still work if yo
24. f you press down the fasteners without rotating them clockwise 4 the heatsink cannot be secured on the motherboard Step 5 Connect fan header with the CPU fan connector on the motherboard Step 6 Secure excess cable with tie wrap to ensure cable does not interfere with fan operation or contact other components 15 2 5 Installation of Memory Modules DIMM 4Core1600 D800 motherboard provides two 240 pin DDR2 Double Data Rate 2 DIMM slots and supports Dual Channel Memory Technology For dual channel configuration you always need to install two identical the same brand speed size and chip type memory modules in the DDR2 DIMM slots to activate Dual Channel Memory Technology Otherwise it will operate at single channel mode 1 Itis not allowed to install a DDR memory module into DDR2 slot 4 otherwise this motherboard and DIMM may be damaged 2 Ifyou install only one memory module or two non identical memory modules it is unable to activate the Dual Channel Memory Technology Installing a DIMM 4 Please make sure to disconnect power supply before adding or removing DIMMs or the system components Step 1 Unlock a DIMM slot by pressing the retaining clips outward Step 2 Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot A The DIMM only fits in one correct orientation It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect o
25. hassis Fan Speed N A Vcore 1 629V 3 30V 3 306V 5 00V 5 067V Select Screen 12 00V 11 890V Select Item General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2003 American Megatrends Inc CPU Quiet Fan This item allows you to identify the temperature of CPU fan If you set this option as Disabled the CPU fan will operate in full speed If you set this option as Enabled you will find the items Target CPU Temperature and Target Fan Speed appear to allow you adjusting them The default value is Disabled You are allowed to enable this function only when you install 4 pin CPU fan Target CPU Temperature The target temperature will be between 45 C 11 J F and 65 C 149 F The default value is 50 C 122 F Target Fan Speed Use this option to set the target fan speed You can freely adjust the target fan speed according to the target CPU temperature that you choose Configuration options Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Level 8 and Level 9 39 3 5 Boot Screen In this section it will display the available devices on your system for you to config ure the boot settings and the boot priority Advanced Boot Settings 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device y Hard Disk Drives y Removable Drives gt CD DVD Drives BIOS SETUP UTILITY H W Monitor Boot Security Exit Configure Settings du
26. he possibility of such damages arising from any defect or error in the manual or product FE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may Cause undesired operation CALIFORNIA USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate a toxic substance controlled in Perchlorate Best Management Practices BMP regulations passed by the California Legislature When you discard the Lithium battery in California USA please follow the related regulations in advance Perchlorate Material special handling may apply see www dtsc ca gov hazardouswaste perchlorate ASRock Website http www asrock com Contents Th IATOQUOTION ioo M ns ne 1 1 1 2 1 3 1 4 1 5 Package EE EES ne dense me sie Minimum Hardware Requirement Table for Windows Vista Premium 2007 and Basic Logo Motherboard Layouts ASROCK We nossas aa a utens 2 Installation oan ooa E ein neat vex eve des 2 1 2 2 2 3 24 2 5 2 6 2f 2 8 2 9 Serew HOol6S e eor ies rente bac nent Pre installation Precautions no0nnoennennnnnnnnennonennnnne CPU Salato EE Installation of Heatsink and CPU fan Installation of Memory Modules DIMM E
27. hics Mode Select Auto DVMT Mode Select DVMT Mode tl DVMT FIXED Memory 256MB ie zez Select Screen Select Item Change Option General Hel OnBoard HD Audio Auto Load Dn Front Panel Auto Save and Exit OnBoard Lan Enabled Exit DRAM Voltage Auto v02 54 C Copyright 1985 2005 American Megatrends Inc Memory Remap Feature Use this item to enable or disable memory remap feature Configuration options Enabled and Disabled The default value is Disabled DRAM Frequency If Auto is selected the motherboard will detect the memory module s inserted and assigns appropriate frequency automatically You may also select other value as operating frequency 3339Hz DDRII667 AOOMHz DDRII800 Flexibility Option The default value of this option is Disabled It will allow better tolerance for memory compatibility when it is set to Enabled DRAM CAS Latency Use this item to adjust the means of memory accessing Configuration options are 6 5 4 3 and Auto DRAM RAS to CAS Delay This controls the latency between the DRAM active command and the read write command Configuration options Auto 3 DRAM Clocks 4 DRAM Clocks 5 DRAM Clocks and 6 DRAM Clocks 29 DRAM RAS Precharge This controls the idle clocks after a precharge command is issued Con figuration options Auto 3 DRAM Clocks 4 DRAM Clocks 5 DRAM Clocks and 6 DRAM Clocks DRAM RAS Activate to Precharge
28. ion with ASRock WiFi 802 11g or WiFi 802 11n module an easy to use wireless local area network WLAN adapter It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity Please visit our website for the availability of ASRock WiFi 802 11g or WiFi 802 11n module ASRock website http www asrock com Minimum Hardware Requirement Table for Windows Vista Premium 2007 and Basic Logo For system integrators and users who purchase this motherboard and plan to submit Windows Vista Premium 2007 and Basic logo please follow below table for minimum hardware requirements Celeron 420 512MB x 2 Dual Channel Premium 512MB Single Channel Basic 256MB x 2 Dual Channel Basic DX9 0 with WDDM Driver If you plan to use onboard VGA to submit Windows Vista logo please keep the default setting of DVMT Mode Select option under BIOS If you plan to use external graphics card on this motherboard please refer to Premium Discrete requirement at http www asrock com After June 1 2007 all Windows Vista systems are required to meet above minimum hardware requirements in order to qualify for Windows Vista Premium 2007 logo 1 4 Motherboard Layout a rh WON ch o Oo 11 12 13 14 15 2 CPU FAN1 C SC a T tH EE S E ATX12V1 Sgor A 236 y E 2 ES E id PIR ne Q 5 E 7 B USB3 c9 2 eh on jejje ER AS z z Intel EE IE lt 29 G31
29. iscard Changes F10 key can be used for this operation Load Optimal Defaults Select Screen Select Item Go to Sub Screen General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc Save Changes and Exit When you select this option it will pop out the following message Save configuration changes and exit setup Select OK to save the changes and exit the BIOS SETUP UTILITY Discard Changes and Exit When you select this option it will pop out the following message Dis card changes and exit setup Select OK to exit the BIOS SETUP UTILITY without saving any changes Discard Changes When you select this option it will pop out the following message Dis card changes Select OK to discard all changes Load Optimal Defaults When you select this option it will pop out the following message Load optimal defaults Select OK to load the default values for all the setup configurations 42 Chapter 4 Software Support 4 1 Install Operating System This motherboard supports various Microsoft Windows operating systems 2000 XP XP 64 bit Vista Vista 64 bit Because motherboard settings and hardware options vary use the setup procedures in this chapter for general reference only Refer to your OS documentation for more information 4 2 Support CD Information The Support CD that came with the motherboard contains necessary drivers and useful
30. lock CPU Configuration mode CPU Frequency MHz 333 PCIE Frequency MHz 100 Boot Failure Guard Enabled Spread Spectrum Auto Ratio Status Unlocked Max 17 Min 12 Ratio Actual Value T Select Screen Enhanced Halt State Disabled Select Item Max CPUID Value Limit Disabled Change Option Intel Virtualization tech Enabled General Help CPU Thermal Throttling Enabled Load Defaults No Excute Memory Protection Disabled Save and Exit Hyper Threading Technology Enabled Exit Intel R SpeedStep tm tech Auto v02 54 C Copyright 1985 2005 American Megatrends Inc Overclock Mode Use this to select Overclock Mode The default value is Auto Configuration options Auto CPU PCIE Sync and CPU PCIE Async CPU Frequency MHz Use this option to adjust CPU frequency PCIE Frequency MHz Use this option to adjust PCIE frequency Boot Failure Guard Enable or disable the feature of Boot Failure Guard Spread Spectrum This item should always be Auto for better system stability 27 Ratio Status This is a read only item which displays whether the ratio status of this motherboard is Locked or Unlocked If it shows Unlocked you will find an item Ratio CMOS Setting appears to allow you changing the ratio value of this motherboard Ratio Actual Value This is a read only item which displays the ratio actual value of this motherboard Enhance Halt State All processors support the Halt St
31. o automatically detect the hard disk drive After selecting the hard disk information into BIOS use a disk utility such as FDISK to partition and format the new IDE hard disk drives This is necessary so that you can write or read data from the hard disk Make sure to set the partition of the Primary IDE hard disk drives to active CD DVD This is used for IDE CD DVD drives ARMD This is used for IDE ARMD ATAPI Removable Media Device such as MO LBA Large Mode Use this item to select the LBA Large mode for a hard disk gt 512 MB under DOS and Windows for Netware and UNIX user select Disabled to disable the LBA Large mode Block Multi Sector Transfer The default value of this item is Auto If this feature is enabled it will enhance hard disk performance by reading or writing more data during each transfer PIO Mode Use this item to set the PIO mode to enhance hard disk performance by optimizing the hard disk timing 34 DMA Mode DMA capability allows the improved transfer speed and data integrity for com patible IDE devices S M A R T Use this item to enable or disable the S M A R T Self Monitoring Analysis and Reporting Technology feature Configuration options Disabled Auto Enabled 32 Bit Data Transfer Use this item to enable 32 bit access to maximize the IDE hard disk data transfer rate 3 3 5PCIPnP Configuration BIOS SETUP UTILITY BENE Advanced Advanced PCI PnP Settings Value in
32. off mode PS 2 Keyboard Power On Use this item to enable or disable PS 2 keyboard to turn on the system from the power soft off mode RTC Alarm Power On Use this item to enable or disable RTC Real Time Clock to power on the system 32 ACPI HPET Table Use this item to enable or disable ACPI HPET Table The default value is Disabled Please set this option to Enabled if you plan to use this motherboard to submit Windows Vista certification 3 3 4IDE Configuration BIOS SETUP UTILITY Advanced IDE Configuration Set Compatible E AA when Legacy OS MS DOS Win NT is used gt SATAII 1 Hard Disk gt SATAII 2 Not Detected gt SATAII 3 Not Detected gt SATAII 4 Not Detected Set Enhanced when Native OS Win 2000 XP gt IDE1 Master Not Detected is used gt IDE2 Slave Not Detected Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2003 American Megatrends Inc ATA IDE Configuration Please select Compatible when you install legacy OS Windows NT If native OS Windows 2000 XP is installed please select Enhanced When Compatible is selected Combined Option It allows you to select between SATA 1 SATA 2 SATA 3 SATA 4 SATA 1 SATA 3 IDE 1 and IDE 1 SATA 2 SATA 4 If it is set to SATA 1 SATA 3 IDE 1 then SATAII 2 and SATAII 4 will not work Likewise if it is set to IDE 1
33. re is Auto 31 3 3 3ACPI Configuration BIOS SETUP UTILITY Advanced ACPI Configuration Select auto detect or disable the STR feature Repost Video on STR Resume No Restore on AC Power Loss Power Off Ring In Power On Disabled PCI Devices Power On Disabled PS 2 Keyboard Power On Disabled RTC Alarm Power On Disabled Select Screen ACPI HPET Table Disabled Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc Suspend to RAM Use this item to select whether to auto detect or disable the Suspend to RAM feature Select Auto will enable this feature if the OS supports it If you set this item to Disabled the function Repost Video on STR Resume will be hidden Repost Video on STR Resume This feature allows you to repost video on STR resume STR refers to suspend to RAM Restore on AC Power Loss This allows you to set the power state after an unexpected AC power loss If Power Off is selected the AC power remains off when the power recovers If Power On is selected the AC power resumes and the system starts to boot up when the power recovers Ring In Power On Use this item to enable or disable Ring In signals to turn on the system from the power soft off mode PCI Devices Power On Use this item to enable or disable PCI devices to turn on the system from the power soft
34. rientation Step 3 Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated 16 2 6 Expansion Slots PCI and PCI Express Slots There are 2 PCI slots and 2 PCI Express slots on this motherboard PCI slots PCI slots are used to install expansion cards that have the 32 bit PCI interface PCIE slots PCIE1 PCIE x16 slot is used for PCI Express cards with x16 lane width graphics cards PCIE2 DE PCIE x1 slot is used for PCI Express cards with x1 lane width cards such as Gigabit LAN card SATA2 card and ASRock PCIE_DE card the onboard VGA will be disabled If you install the add on PCI Express VGA card to PCIE1 PCIE x16 slot and adjust the Internal Graphics Mode Select BIOS option to Enabled the onboard VGA will be enabled and the primary screen will be onboard VGA 2 If you want to use ASRock DeskExpress function on this motherboard please install ASRock PCIE_DE card on PCIE2 DE slot 1 If you install the add on PCI Express VGA card to PCIE1 PCIE x16 slot Installing an expansion card Step 1 Before installing the expansion card please make sure that the power supply is switched off or the power cord is unplugged Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation Step 2 Remove the bracket facing the slot that you intend to use Keep the screws for l
35. ring System Boot 1st Floppy Device HDD PM HDS722580VL CD DVD 3S CD ROM C USB Select Screen Select Item Go to Sub Screen General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc 40 3 5 1 Boot Settings Configuration BIOS SETUP UTILITY Boot Settings Configuration THU enable ar EE Ehe boot from onboard LAN feature Bootup Num Lock Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc Boot From Onboard LAN Use this item to enable or disable the Boot From Onboard LAN feature Boot Up Num Lock If this item is set to On it will automatically activate the Numeric Lock function after boot up 3 6 Security Screen In this section you may set or change the supervisor user password for the system For the user password you may also clear it BIOS SETUP UTILITY Advanced H W Monitor Boot Security Security Settings Install or Change the password Supervisor Password Not Installed User Password Not Installed Change User Password Select Screen Select Item Change General Help Load Defaults Save and Exit Exit v02 54 C Copyright 1985 2005 American Megatrends Inc 4 3 7 Exit Screen BIOS SETUP UTILITY Advanced H W Monitro Boot Security Exit Options Exit system setup after saving the changes Discard Changes and Exit D
36. rive controller Serial Port Address Use this item to set the address for the onboard serial port or disable it Configuration options Disabled 3F8 IRQ4 2F8 IRQ3 DES IRQ4 2E8 IRQ3 Infrared Port Address Use this item to set the address for the onboard infrared port or disable it Configuration options Disabled 2F8 IRQ3 and 2E8 IRQ3 If you plan to use ASRock DeskExpress on this motherboard please keep this item on Disabled option 36 Parallel Port Address Use this item to set the address for the onboard parallel port or disable it Configuration options Disabled 378 and 278 Parallel Port Mode Use this item to set the operation mode of the parallel port The default value is ECP EPP If this option is set to ECP EPP it will show the EPP version in the following item EPP Version Configuration options Normal Bi Directional and ECP EPP EPP Version Use this item to set the EPP version Configuration options 1 9 and 1 7 ECP Mode DMA Channel Use this item to set the ECP mode DMA channel Configuration options DMAO DMA1 and DMA3 Parallel Port IRQ Use this item to set the IRQ for the parallel port Configuration options IRQ5 and IRQ7 37 3 3 8USB Configuration BIOS SETUP UTILITY Advanced USB Configuration To enable or disable SS a oe the onboard USB controllers USB 2 0 Support Enabled Legacy USB Support BIOS Setup Only Select Screen
37. roduct information please visit our website http www asrock com WARNING Please realize that there is a certain risk involved with overclocking including adjusting the setting in the BIOS applying Untied Overclocking Technology or using the third party overclocking tools Overclocking may affect your system stability or even cause damage to the components and devices of your system It should be done at your own risk and expense We are not responsible for possible damage caused by overclocking CAUTION de 10 11 FSB1600 CPU will operate in overclocking mode Under this situation PCIE frequency will also be overclocked to 120MHz If you use a FSB1600 CPU on this motherboard you need to adjust the jumpers If you want to overclock the CPU you adopt from FSB800 to FSB1066 you need to adjust the jumpers as well Please refer to page 18 for proper jumper settings About the setting of Hyper Threading Technology please check page 28 This motherboard supports Untied Overclocking Technology Please read Untied Overclocking Technology on page 24 for details This motherboard supports Dual Channel Memory Technology Before you implement Dual Channel Memory Technology make sure to read the installation guide of memory modules on page 16 for proper installation Please check the table below for the CPU FSB frequency and its corresponding memory support frequency CPU FSB Frequency Memory Support Frequenc
38. soft Windows XP Set to Enabled if using Microsoft Windows XP or Linux kernel version 2 4 18 or higher This option will be hidden if the installed CPU does not sup port Hyper Threading technology Intel R SpeedStep tm tech Intel R SpeedStep tm tech is Intel s new power saving technology Proces sor can switch between multiple frequency and voltage points to enable power 28 d 3 3 2 Chipset Configuration savings The default value is Auto Configuration options Auto Enabled and Disabled If you install Windows XP and select Auto you need to set the Power Schemes as Portable Laptop to enable this function If you install Windows Vista and want to enable this function please set this item to Enabled This item will be hidden if the current CPU does not support Intel R SpeedStep tm tech Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power supplies Please set this item to Disable if above issue occurs BIOS SETUP UTILITY Advanced Chipset Configuration ENABLE Allow remapping of overlapped PCI memory above the total DRAM Frequency Auto Flexibility Option Disabled DRAM CAS Latency Auto esten DRAM RAS to CAS Delay Auto La EC DRAM RAS Precharge Auto DRAM RAS Activate to Precha Auto DISABLE Do not allow remapping of memory Primary Graphics Adapter PCI Internal Grap
39. u adopt a traditional 20 pin ATX power supply To use the 20 pin ATX power supply please plug your power supply along with Pin 1 and Pin 13 20 Pin ATX Power Supply Installation ATX 12V Connector 4 pin ATX12V1 see p 10 No 1 Please connect an ATX 12V power supply to this connector e Si 00 22 2 9 SATAII Hard Disk Setup Guide Before installing SATAII hard disk to your computer please carefully read below SATAII hard disk setup guide Some default setting of SATAII hard disks may not be at SATAII mode which operate with the best performance In order to enable SATAII function please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance otherwise your SATAII hard disk may fail to run at SATAII mode Western Digital d al 8 6 4 2 If pin 5 and pin 6 are shorted SATA 1 5Gb s will be enabled On the other hand if you want to enable SATAII 3 0Gb s please remove the jumpers from pin 5 and pin 6 SAMSUNG 71513811 HU 8161412 If pin 3 and pin 4 are shorted SATA 1 5Gb s will be enabled On the other hand if you want to enable SATAII 3 0Gb s please remove the jumpers from pin 3 and pin 4 HITACHI Please use the Feature Tool a DOS boota
40. utilities that enhance the motherboard features 4 2 1 Running The Support CD To begin using the support CD insert the CD into your CD ROM drive The CD automatically displays the Main Menu if AUTORUN is enabled in your computer If the Main Menu did not appear automatically locate and double click on the file ASSETUP EXE from the BIN folder in the Support CD to display the menus 4 2 2 Drivers Menu The Drivers Menu shows the available devices drivers if the system detects installed devices Please install the necessary drivers to activate the devices 4 2 3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports Click on a specific item then follow the installation wizard to install it 4 2 4 Contact Information If you need to contact ASRock or want to know more about ASRock welcome to visit ASRock s website at http www asrock com or you may contact your dealer for further information 43
41. ws into the holes indicated by circles to secure the motherboard to the chassis Do not over tighten the screws Doing so may damage the motherboard 2 2 Pre installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings 1 Unplug the power cord from the wall socket before touching any component 2 To avoid damaging the motherboard components due to static electricity NEVER place your motherboard directly on the carpet or the like Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components 3 Hold components by the edges and do not touch the ICs 4 Whenever you uninstall any component place it on a grounded antistatic pad or in the bag that comes with the component Before you install or remove any component ensure that the power is switched off or the power cord is detached from the power supply Failure to do so may cause severe damage to the motherboard peripherals and or components 12 2 3 CPU Installation For the installation of Intel 775 LAND CPU please follow the steps below Load Plaie 775 Pin Socket Overview Before you insert the 775 LAND CPU into the socket please check if the CPU surface is unclean or if there is any bent pin on the socket Do not force to insert the CPU into the socket if above situation is found Otherwise the CPU will be seriously damaged Step 1
42. xpansion Slots PCI and PCI Express Slots Jumpers SOLID EE Onboard Headers and Connectors SATAII Hard Disk Setup Guide 2 10 Serial ATA SATA Serial ATAII SATAII Hard Disks ee UE d Te WEEN 2 11 Driver Installation Guide esseseseseeses 2 12 Untied Overclocking Technology 3 BIOS SETUP UTILITY ns uses 3 1 3 2 IFITFOGUCTION NRI seen ann 3 1 1 BIOS Menu Bar 3 1 2 Navigation EE MaM SGre EE 3 3 Advanced Screen ccccccscccceccsccecsececucceceecuececaecutaecanss 3 4 3 5 3 3 1 CPU Configuration eeeseseeeeeeeeeesees 3 3 2 Chipset Configuration neeeneeeeennneeeeeeeeennn nenene 3 3 3 ACPI Configuration cccccccscsssessseseeeeeeeeeaaaeens 3 3 4 IDE Configuration cccccccccssseeeeseeeeeeeeeeaaaeeeees 3 3 5 PCIPnP Configuration ccccccssseseseeeeeeeeeeeaeeeees 3 3 6 Floppy Configuration sese 3 3 7 Super IO Configuration nnenseeenneeennnneneeeneennn nene 3 3 8 USB Configuration eeesseeeeeeeeesees Hardware Health Event Monitoring Screen Boot Seen PE 3 5 1 Boot Settings Configuration 3 6 Security SCION deed SEENEN a Y xa agus 41 Dal NEXIS SCO E 42 4 Software Support
43. y DDR2 800 DDR2 667 DDR2 800 DDR2 667 DDR2 800 DDR2 667 DDR2 800 Due to the operating system limitation the actual memory size may be less than 4GB for the reservation for system usage under Windows XP and Windows Vista For Windows XP 64 bit and Windows Vista 64 bit with 64 bit CPU there is no such limitation Although this motherboard offers stepless control it is not recom mended to perform over clocking Frequencies other than the recom mended CPU bus frequencies may cause the instability of the system or damage the CPU While CPU overheat is detected the system will automatically shutdown Before you resume the system please check if the CPU fan on the motherboard functions properly and unplug the power cord then plug it back again To improve heat dissipation remember to spray thermal grease between the CPU and the heatsink when you install the PC system The maximum shared memory size is defined by the chipset vendor and is subject to change Please check Intel website for the latest information Before installing SATAII hard disk to SATAII connector please read the SATAII Hard Disk Setup Guide on page 23 to adjust your SATAII hard disk drive to SATAII mode You can also connect SATA hard disk to SATAII connector directly Power Management for USB 2 0 works fine under Microsoft Windows Vista 64 bit Vista XP 64 bit XP SP1 or SP2 2000 SP4 3 12 WiFi E header supports WiFi AP funct

Download Pdf Manuals

image

Related Search

Related Contents

Manual do produto (PT)  • • • • • • • • • • • •  W R 側溝蓋 - コンクリート二次製品の郡家コンクリート  Mode Emploi Taxe de séjour2 - Office de Tourisme de Perpignan  Manual    PPG_user_guide Rev A (, 1523293 byte)  入札公告 - 独立行政法人 日本芸術文化振興会  取扱説明書 - ティアック  GE ERESCO MF4 Brochure  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.