Amana LE1100 Clothes Dryer User Manual
Contents
1. A WARN l NG To reduce the risk of fire electric shock or injury E Do not immerse E Use only on surfaces moistened by cleaning process E Always connect to a properly grounded outlet E See Grounding Instructions E Unplug from outlet when not in use and before conducting maintenance or troubleshooting E Do not leave machine when it is plugged in E Do not service machine when it is plugged in E Do not use with damaged cord or plug E If appliance is not working as it should has been dropped damaged left outdoors or dropped into water have it repaired at an authorized Service Center E Use indoors only E Do not pull or cary by cord use cord as a handle close door on cord pull cord around sharp comers or edges run appliance over cord or expose cord to heated surfaces E Unplug by grasping the plug not the cord E Do not handle plug or appliance with wet hands E Do not put any object into appliance openings use with blocked opening or restrict air flow E Do not expose hair loose clothing fingers or body parts to openings or moving parts E Do not pick up hot or burning objects E Do not pick up flammable or combustible materials lighter fluid gasoline kerosene etc or use in the presence of explosive liquids or vapor E Do not use appliance in an enclosed space filled with vapors given off by oil base paint paint thinner some math proofing substances flammable dust or other explosive or toxic2. water Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank Remove the top of the tank by lifting up on the handle Note how the lip on the top tank separates from the groove in the bottom tank This placement is important when putting the tank back together Lift the bottom portion of the tank pour out dirty water toward the sink through the triangular shaped opening in the corner of the tank Note You may notice hair amp debris deposits on the carpet or in the tank that were loosened by the cleaning action especially with newer carpets that have never been deep cleaned before This debris should be picked up and thrown away Fill the heavy duty bladder with clean hot tap water following instructions 1c through 1e on pages 9 and 10 Note Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank Always check the level of cleaning formula in the formula tank at the same time and refill as needed A Bissell rN 800 237 7691 11 6 26 08 2 11 48 PM Operation Carpet cleaning Continued 8 Water rinse Optional Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the Custom Clean dial to a water rinse setting or it can be done after the carpeted area has been cleaned Simply choose the water rinse setting on the custo
3. www bissell com 800 237 7691 5 ug310 5943_9200_608 indd 5 6 26 08 2 11 40 PM How to use this guide This user s guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X You ll find assembly and operating instructions safety precautions as well as maintenance and troubleshooting instructions Please read this guide thoroughly before assembling your deep cleaner Pay particular attention to the product diagram assembly instructions and part names Locate and organize all parts before assembly Familiarize yourself with the parts and where they go Following this user s guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years Assembly Your ProHeat 2X comes in three easy to assemble components Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head amp screwdriver 1 Slide upper handle onto lower handle 2 Screw 3 screws into the marked holes 3 Place upper hose rack onto back of upper handle and secure with tapered screw 4 Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place 5 Snap tools into the tool caddy as shown in figure 5 6 Wrap power cord and flex hose as shown in figure 5 7 Keep flex hose snugly in place by using the hose secure latch ProHeat 2X assembly is now complete A
4. Bissell 6 www bissell com ug310 5943_9200_608 indd 6 Z WARNING Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures 3 i egi 3 Tough Stain Brush 5 pS Crevice Tool ae AG N urboBrush select models select models Aff Spraying Crevice Tool select models Hose Secure Latch 800 237 7691 6 26 08 2 11 42 PM Special features of your BISSELL ProHeat 2X Your BISSELL ProHeat 2X deep cleaner is a home cleaning system that uses the power of heat brushes and cleaning formula to get the deep down dirt for a maximum clean Not only does it come with a lot of unique features it has been designed with you the customer in mind Built in Heater feature BISSELL ProHeat 2X models all feature a patented built in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness The heater will never allow the temperature to exceed 190 degrees The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs Dual DirtLifter PowerBrushes The two DirtLifter PowerBrush rolls are designed to enhance cleaning performance The bristle pattern safely lifts out the deep down dirt while gently groo
5. CLEANING Power Switch Heater Switch WARNING To reduce the risk of fire and electric shock due to intemal component damage use only BISSELL cleaning fluids intended for use with the deep cleaner 800 237 7691 6 26 08 2 11 47 PM Operation Carpet cleaning Continued 6 7a 7b 7c 7d www bissell com ug310 5943_9200_608 indd 11 Continued Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying Repeat cleaning passes until solution being pulled up appears clean Continue passes without pressing the trigger until you can t see any Keep plenty of genuine BISSELL Fiber Cleansing Formula on hand so you can clean whenever it fits your schedule Always use genuine BISSELL deep cleaning formulas Non BISSELL cleaning solutions may harm the machine and void the warranty more water being pulled up After cleaning you may want to turn the Custom Clean dial to rinse to give your carpeting a final water only rinse This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula BISSELL deep cleaning formulas contain an anti resoiling agent that helps your carpets repel dirt and keeps them looking good longer Remove the tank from the base of the machine by lifting up on the tank carry handle Carry like a bucket to a utility sink or outside where you will dispose of the dirty
6. If it should malfunction or break down grounding provides a safe path of least resistance for electrical current reducing the risk of electrical shock The cord for this appliance has an equipment grounding conductor and a grounding plug It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances Grounded Outlets A WARN l N G Improper connection of the equipment grounding conductor can result in a risk of electrical shock Check with a qualified electrician or service person if you aren t sure if the outlet is properly grounded DO NOT MODIFY THE PLUG If it will not fit the outlet have a proper outlet installed by a qualified electri cian This appliance is designed for use on a nominal 120 volt circuit and has a ground ing attachment plug that looks like the plug in the drawing above Make certain that the appliance is connected to an outlet having the same configuration as the plug No plug adapter should be used with this appliance 800 237 7691 3 6 26 08 2 11 32 PM Product view Power Switch Extra Long Power Cord Heat ndicator Light Tank Carry Handle ReadyTools Dial Easy To Remove Nozzle Optional Accessories Spray Trigger Heater Switch Flex Hose Upper Handle Easy Carry Handle These items are available for purchase To order replacement parts additional tools or formulas please refer to pag
7. of unit be latching from underneath and then securing with a screw If you have any questions or are having trouble installing or replacing your belt s or brushes please call BISSELL Consumer Services at 1 800 237 7691 A 18 www bissell com Bissel 800 237 7691 ug310 5943_9200_608 indd 18 6 26 08 2 11 55 PM www bissell com Troubleshooting N WARNING Built in heater ready light does not illuminate Possible Cause 1 The heater switch is not turned ON 1 2 The power switch is not turned ON 1 Reduce Spray or No Spray Possible Cause 1 Water tank may be empty 2 Formula tank may be empty 3 Tank may not be seated completely 4 Pump may have lost prime DirtLifter PowerBrushes do not turn Possible Cause 1 The brush is off or broken 2 The unit is in the upright position 3 Circuit breaker may have tripped A ug310 5943_9200_608 indd 19 Bissel To reduce the risk of fire electric shock or injury unplug from outlet before servicing Remedies 1 2 Turn the heater switch ON 1 Both switches must be ON 1 to activate the heater ready light Remedies 1 2 Fill heavy duty bladder with hot tap water Fill formula tank with BISSELL Fiber Cleansing Formula for cleaning Turn power OFF O Remove and reseat tank Turn power OFF O and then back ON 1 Wait one minute then depress Trigger Remedies 1 Turn power OFF
8. so the 2008 BISSELL Homecare Inc above limitation may not apply to you Grand Rapids Michigan All rights reserved Printed in China Part Number 310 5943 Rev 6 08 Visit our website at www bissell com Scotchgard is a trademark of 3M A 24 www bissell com Bissel 800 237 7691 ug310 5943_9200_608 indd 24 6 26 08 2 12 02 PM
9. the 2 in 1 water tank is emptied rinsed out and dried before the next use The formula tank can remain filled and ready to go or it can simply be emptied back into the formula bottle if that is more convenient Note Store cleaner in a protected dry area Since this product uses water it must not be stored where there is a danger of freez ing Freezing will damage internal compo nents and void the warranty Machine care For best results a few simple steps can assure your machine is well maintained after your cleaning is complete 1 Turn power and heater switches OFF 0 Unplug the machine and wrap the power cord After emptying the 2 in 1 water tank rinse it out at a faucet with running hot tap water taking care to clean underneath the heavy duty bladder and all around it The top half of the tank can be rinsed clean through the nozzle area Also pop out the red filter underneath the top half of the tank and rinse that out Replace before putting the top and bottom halves of the tank together Before you place the cleaned 2 in 1 water tank back onto the machine simply unscrew the floor nozzle using a Phillips head screwdriver This can be rinsed out at the faucet Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine Secure into place with the screw The inside of the end caps by the brush rolls can be wiped
10. vapors E Do not pick up toxic material chlorine bleach ammonia drain cleaner gasoline etc E Do not modify the 3 prong grounded plug E Do not allow to be used as a toy E Do not use for any purpose other than described in this User s Guide E Do not operate the appliance unless the belt door is securely assembled in the location provided E Do not unplug by pulling on the cord E Use only manufacturer s recommended attachments E Always install float before any wet pick up operation E Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage See the cleaning fluid section of this guide E Keep openings free of dust lint hair etc E Do not point attachment nozzle at people or animals E Keep appliance on a level surface www bissell com ug310 5943_9200_608 indd 3 E Turn off all controls before unplugging E Unplug before attaching the TurboBrush E Be extra careful when cleaning stairs E Close attention is necessary when used by or near children E WARNING The power cord on this product contains lead a chemical known to the State of California to cause birth defects or other reproductive harm WASH HANDS AFTER HANDLING SAVE THESE INSTRUCTIONS THIS MODEL IS FOR HOUSEHOLD USE ONLY Commercial use of this unit voids the manufacturer s warranty GROUNDING INSTRUCTIONS This appliance must be connected to a grounded wiring system
11. 203 6804 17 203 6689 18 203 6690 12 22 www bissell com ug310 5943_9200_608 indd 22 Part Name Grey Tank Assembly complete for Black unit Blue or Purple complete tank assemblies available upon request Grey Tank Lid Blue or Purple Tank Lids available upon request Grey Tank Bottom Blue or Purple Tank Bottoms available upon request Cap and Insert for Water Tank Formula Tank includes Cap amp Insert for Formula Tank Cap and Insert for Formula Tank Front Nozzle includes gasket Autoload Gasket fits both Water and Formula Tank Float Door Tank Filter Lint Screen Water Tank Latch Cord Wrap Black Blue or Purple cord wrap available upon request Clear End Cap w Edge Brushes 2 pack includes screws Brush Roll 6 row includes 1 brush axle 2 swivel arms Small Brush Belt non cord side Large Brush Belt cord side Hose Secure Latch Hose Rack Assembly Top Bottom Hose Rack Screws 3 4 15 Bissel E 800 237 7691 6 26 08 2 11 59 PM Additional accessories These items are available for purchase as accessories for your BISSELL ProHeat 2X To purchase call 1 800 237 7691 or visit www bissell com Item 1 oor Ww PP Part No 203 6651 203 6652 203 6653 203 6654 203 6655 203 6692 Part Name 3 Tough Stain Tool Powered TurboBrush Hand Tool 4 Upholstery Tool 6 Stair Tool Spraying Crevice Tool Bare Floor Tool Cleaning Formula Refer to bottom of page 5 of thi
12. ProHeat 2X after USER S GUIDE 8920 8930 8960 9200 9300 9400 SERIES 3 Safety Instructions 4 5 Product View Bissel PROheat 6 Assembly 2 7 8 Special Features 9 15 Operation 16 18 Maintenance and Care 19 20 Troubleshooting 21 Consumer Services 22 23 Replacement Parts 24 Warranty K l brushe h V Dual piRTLIFTER power ug310 5943_9200_608 indd 1 6 26 08 2 11 31 PM Thanks for buying a BISSELL ProHeat 2X We re glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner Everything we know about floor care went into the design and construction of this complete high tech home cleaning system Your ProHeat 2X is well made and we back it with a limited one year warranty We also stand behind it with a knowledgeable dedicated Consumer Services department so should you ever have a problem you ll receive fast considerate assistance My great grandfather invented the floor sweeper in 1876 Today BISSELL is a global leader in the design manufacture and service of high quality homecare products like your ProHeat 2X Thanks again from all of us at BISSELL Am aA 1 Rr Mark J Bissell President and Chief Executive Officer 2 www bissell com PER 800 237 7691 ug310 5943_9200_608 indd 2 6 26 08 2 11 32 PM IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should be observed including the following Read all instructions before using your ProHeat 2X
13. and unplug unit from outlet Follow instructions on page 17 Brushes only rotate when unit is reclined using the detent pedal Turn the machine OFF O and unplug from outlet Check to see if foreign object is caught in brush roll Remove object Plug machine back in to reset circuit breaker 800 237 7691 19 6 26 08 2 11 56 PM Troubleshooting Cleaner not picking up solution Possible Causes 1 ReadyTools dial may be at wrong setting ng 2 Tank may not be seated properly 3 Tank may not be assembled properly 4 Solution or 2 in 1 water tank is empty 5 2 in 1 water tank has picked up maximum dirty water and red float door has closed Red float door in the tank may have closed as a result of bumping an object or moving Remedies 1 6 Set ReadyTools dial to either FLOOR CLEANING or TOOLS setti Pick up both the 2 in 1 water tank and formula tank and reseat them so they fit snugly on the unit Check to make sure the lip of the nozzle is securely hooked into the groove on bottom of Tank see page 9 Check fluid levels in heavy duty bladder and formula tank Empty 2 in 1 water tank Refill heavy duty bladder with clean hot tap water and replace Turn the machine OFF allowing red float door to release into machine back and forth too quickly the open position Tum unit back ON 1 to continue cleaning Be sure your forward and backward stroke
14. b If using the BISSELL 3X Concentrated Fiber Cleansing Formula Add 3 capfuls of 3X Concentrated Fiber Cleansing formula to the formula tank and then fill with hot water to the line 3 Set Custom Clean Dial Simply choose one of the 4 settings heavy traffic normal clean light clean or water rinse and the ProHeat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need 4 Set ReadyTools Dial to the floor cleaning setting 5 Plug into a proper outlet and turn the power and heater switches to the ON 1 position Allow 1 minute for the built in heater to warm up before Cleaning The ProHeat 2X will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning 6 Cleaning Strokes While pressing the trigger make one slow forward wet pass and another one back Let the built in heater formula and DirtLifter PowerBrushes do the work for you Caution Do not overwet Take care not to run over loose objects or edges of area rugs Stalling brush may result in premature belt failure Note Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll If that happens be sure to unplug your machine remove the foreign object and then plug the machine back in to reset the circuit breaker A i alssell 10 www bissell com ug310 5943_9200_608 indd 10
15. baseboards turn knob to TOOLS and choose the attachment appropriate for the job Attach tool to the flex hose and you are ready to go Be sure to turn knob back to FLOOR CLEANING when done AUG CLE A Bissell 8 www bissell com 800 237 7691 ug310 5943_9200_608 indd 8 6 26 08 2 11 43 PM Operation Before you clean 1 2 Plan activities to give your carpet time to dry Move furniture to another area if cleaning an entire room optional Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning Plan your cleaning route to leave an exit path It is best to begin cleaning in the corner farthest from your exit Pretreating optional Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways A Spray the BISSELL Tough Stain Pre treat formula onto heavy traffic areas soiled areas or stains B Allow to penetrate for at least 3 minutes C Clean as normal using the BISSELL ProHeat 2X machine on the high traffic setting following the instructions below Carpet cleaning 1 la 1b 1c 1d www bissell com Fill the 2 in 1 Water Tank Remove the tank from the base of the machine by lifting up the tank carry handle Carry like a bucket to the sink Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank Remove t
16. e 22 23 3 Tough Stain Brush 4 Upholstery Tool 6 Stair Tool Spraying Crevice Tool Issel 4 www bissell com ug310 5943_9200_608 indd 4 Hard Floor Attachment TurboBrush l nile Mesh Tool Bag bag only 800 237 7691 6 26 08 2 11 35 PM Hose Secure Latch TurboBrush Storage select models Crevice Tool Holder select models Lower Hose Rack Lower Base Keep plenty of genuine BISSELL Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule Always use genuine BISSELL deep cleaning formulas Non BISSELL cleaning solutions may harm the machine and void the warranty BISSELL Formulas These items are available for purchase To order replacement parts additional tools or formulas please refer to page 22 23 l E f oN fears ng e Le 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 43 oz BISSELL 32 oz 22 02 Fiber Cleansng Multi Allergen Pet Odor and Sol Natural Orange Lavender Essence 3X Concentrated BISSELL BISSELL Formula with Removal Removal Formula Extract Formula Formula with Fiber Cleansng Hard Floor Tough Stain Scotchgard Formua with with Scotchgard with Scotchgard Scotchgard Formula with Solutions PreCleaner Protector Scotchgard Protector Protector Protector Scotchgard Formula 0400 0710 Protector 0730 0740 A 0750 Protector 0484 0720 Issel 0716
17. e front nozzle and remove it Set aside Turn the machine on its side IMPORTANT cord side down Remove the clear end cap by unscrewing the 2 black screws Take care not to drop the screws into the unit Remove 1 silver screw Remove pivot arm by gently lifting up Remove small brush belt Replace small brush belt and reverse steps above Bissell Bea ug310 5943_9200_608 indd 17 WARNING To reduce the risk of fire electric shock or injury unplug from the outlet before servicing 800 237 7691 6 26 08 2 11 54 PM 17 Maintenance and care WARNING To reduce the risk of fire Brush removal and large belt replacement Brushes can be removed for cleaning or electric shock or injury replacement as needed unplug from the outlet 1 Follow small belt removal Instructions on before servicing page 17 2 Remove brush rolls by pulling them off of 2 the metal rods 3 Place cleaned or new brush rolls back onto the rods Make sure one washer is on each end of the rollers prior to sliding onto the rod Be sure to let the rod slide through the bushing to insure proper fit 4 Re attach the long belt on the bottom to the cogs of the small roller brushes 5 Place small belt over back roller and metal cog 6 Place pivot arm in place and screw in place using the silver screw 7 Re attach clear end cap by tightening with the 2 black screws 6 8 Return front nozzle to front
18. ffers deep cleaning formulas with Scotchgard protector This offers extra protection against dirt and tough stains to keep your carpets looking good longer To maintain your Scotchgard 5 year limited stain warranty you no longer are required to hire a professional By using your BISSELL ProHeat machine with BISSELL formulas containing Scotchgard protector every 12 months your carpet warranty from 3M remains in effect No other home deep cleaning system can do this for you 2 in 1 water tank Our 2 in 1 water tank full capacity system is designed with a heavy duty bladder inside for clean water As you clean the clean water in the bladder will empty and mix with the cleaning formula Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate This allows the user to maximize tank space yet only carry one tank to and from the sink for emptying and filling Easy to remove and clean nozzle Now cleaning up your machine after the cleaning process is easier than ever Simply remove the 2 in 1 Tank and remove the screw to pop out the nozzle for rinsing in the sink Dirt loose carpet fibers and remaining pet hair or fuzz get washed away in a snap ReadyTools dial This provides either floor cleaning or above floor Cleaning with the turn of a knob If choosing above floor cleaning for upholstery stairs or for those creases close to the
19. filling the 2 in 1 water tank and the formula tank 3 Set ReadyTools dial to the hose attachments setting This will allow spray and suction from the hose n A 12 www bissell com a 800 237 7691 ug310 5943_9200_608 indd 12 6 26 08 2 11 49 PM ipeansi ng Operation Cleaning with attachments Continued 4 Set custom clean dial for heavy traffic normal Clean light clean or water rinse as desired 5 5 Attach the cleaning tool to the end of the hose a N pYA 6 Plug in and turn on the power switch and MOS heater if desired 7 Clean by pressing the trigger to spray solution onto the area to be cleaned Slowly move the tool back and forth over the soiled surface Release the trigger to suction soiled water Continue to clean in the area working in small sections until no more dirt can be removed Rinse optional and suction as needed Caution Do no overwet 8 Remove and rinse tools in clean running water Dry and replace in the tool caddy 9 Itis recommended that you suction clean water from the tap to rinse out the hose 10 Before replacing lift end of hose and stretch out to ensure all water is cleared from hose 11 Coil flex hose around the tool caddy WARNING To reduce the risk of fire and electric shock due to 13 Return ReadyTools dial to floor setting internal component 12 Empty 2 in 1 water tank and rinse out following the instructions on page 11 damage use only BISSELL Cleanin
20. furniture if needed 3 Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank Fill formula tank with BISSELL Hard Floor Solutions available at many retailers or contact BISSELL Consumer Services 4 Fill the 2 in 1 water tank with hot tap water and set aside 5 Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place 6 Check ReadyTools dial It should be set on floor cleaning 7 Set the Custom Clean dial to normal clean 8 Plug into an outlet and turn the power switch and heater ON 1 9 Slowly move the machine forward and back over hard floor surface one time while depress ing trigger Caution Do not overwet 10 Repeat the motion without pressing the trig ger using the hard floor tool to squeegee and suction up the dirty water 11 Allow adequate time for floors to dry 12 Remove hard floor tool rinse and dry before storing 13 If any formula remains in the formula tank pour it back into the Hard Floor Solutions bottle for use the next time 14 Rinse out the formula tank A BlSsSel www bissell com N ug310 5943_9200_608 indd 15 WARNING To reduce the risk of fire electric shock or injury unplug from outlet before servicing 800 237 7691 15 6 26 08 2 11 51 PM Maintenance and care Machine storage Once your cleaning is complete make sure
21. g fluids intended for use with the deep cleaner Cleaning fluid section Non BISSELL cleaning Keep plenty of genuine BISSELL Fiber Cleansing solutions may harm the Formula on hand so you can clean and machine and void protect whenever it fits your schedule Always the warranty use genuine BISSELL deep cleaning formulas w 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 48 oz BISSELL 43 oz BISSELL 32 oz 22 02 Fiber Cleansng Multi Allergen Pet Odor and Soil Natural Orange Lavender Essence 3X Concentrated BISSELL BISSELL Formul with Removal Removal Formula Exact Formula Formula with Fiber Cleansing Hard Floor Tough Stain Scotchgard Fomua with with Scotchgard with Scotchgard Scotchgard Formulawith Solutions PreCleaner Protector Scotchgard Protector Protector Protector Scotchgard Formula 0400 0710 Protector 0730 0740 0750 Protector 0484 0720 _ 0716 www bissell com pao 800 237 7691 13 ug310 5943_9200_608 indd 13 6 26 08 2 11 51 PM Operations Stain removal Do Not Delay Attending to an accident soon after it occurs ensures the most optimal clean Leaving it for an extended period of time may cause it to set and become permanent 1 14 www bissell com Blot up liquids with an absorbent cloth or paper towels White materials are recommended because certain dyes may bleed and make the stain worse Gently scrape up any semi solids with a
22. he User s Guide is not covered gt more ued If your BISSELL product should require service Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area If you need information about repairs or replacement parts or if you have questions about your warranty contact BISSELL Consumer Services Website or E mail www bissell com Use the Customer Services tab Or Call BISSELL Consumer Services 1 800 237 7691 Monday Friday 8 a m 10 p m ET Saturday 9 a m 8 p m ET Or write BISSELL Homecare Inc PO Box 3606 Grand Rapids MI 49501 ATTN Consumer Services BISSELL HOMECARE INC IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT BISSELL S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND Bissell FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE Some states do not allow limitations on how long an implied warranty lasts
23. he top of the tank by lifting up on the handle Note how the lip on the top tank separates from the groove in the bottom tank This placement is important when putting the tank back together Fill the heavy duty bladder with clean hot tap water Do not boil or microwave water as it can destroy the bladder Leaving the filled bottom of the tank on a flat surface only maneuver the top of the tank To attach the top part of the tank to the bottom carefully hook the lip on the top tank into the groove on the bottom tank A siSsel a ug310 5943_9200_608 indd 9 ATTENTION Some Berber carpets have a tendency to fuzz with wear Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition Please see Stain Removal instructions on page 14 Lip Groove underside of bottom tank 800 237 7691 9 6 26 08 2 11 45 PM Operation Carpet cleaning Continued 1e Fasten tanks together by securing the latch in the back Note Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank 2 Remove formula tank from back of machine 2a Fill the formula tank by first unscrewing the cap and insert Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine Fill formula up to the line and replace the cap and insert Place formula tank into the slot in the back of the machine for a snug fit 2
24. m clean dial and follow the same path as you did for cleaning taking care to do a forward wet stroke by depressing the trigger a backward wet stroke and a forward and backward dry stroke releasing the trigger Continue this until the water you see coming up the nozzle is clear Cleaning with attachments Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs upholstery and more 1 Important If using to clean upholstery check upholstery tags A Check manufacturer s tag before cleaning W or WS on the tag means you can use your ProHeat 2X If the tag is coded with an X or an S with a diagonal stripe through it or says Dry Clean Only do not proceed with any deep cleaning machine Do not use on velvet or silk If Manufacturer s tag manufacturer s tag is missing or not coded check with your furniture dealer B Check for colorfastness in an A WAR N l N G To reduce the risk of inconspicuous place C If possible check upholstery stuffing injury be extra careful Colored stuffing may bleed through when cleaning stairs fabric when wet Make sure machine is secure and level D Plan activities to allow upholstery time to dry E Vacuum thoroughly to pick up loose debris and pet hair Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds 2 Follow the instructions on pages 9 amp 10 for
25. ming carpet fibers located behind water tank The floating suspension self adjusts to all carpet heights and protects your carpet if you leave the power switch ON 1 Once the product is in the upright position the brushes automatically stop spinning The detent pedal will activate the brushes when floor cleaning Custom Cleane The Custom Clean feature automatically mixes hot tap water with the BISSELL formula Simply choose one of the 4 settings heavy traffic normal clean light clean or water rinse and the ProHeat 2X will adjust the right amount of Cleaning solution to mix with the heated water to fit your cleaning need This feature is available on all ProHeat 2X models either behind the 2 in 1 water tank or on the upper handle Having a separate solution tank from the water tank also allows no waste of formula Because the water and solution are stored separately they are not mixed until you are ready to clean When your cleaning job is finished the formula can be stored ready to use in your machine for the next time located on upper handle lssell www bissell com 800 237 7691 7 ug310 5943_9200_608 indd 7 6 26 08 2 11 42 PM Special features of your BISSELL ProHeat 2X Scotchgard Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning including deep cleaning To help restore this important protection only BISSELL o
26. out with a clean paper towel or if a more thorough cleaning is desired the end caps can be taken off using a Phillips head screwdriver and rinsed clean Replace after cleaning Any loose hair or debris can be pulled from the brush rolls and thrown away For the most thorough clean before storage follow directions on pages 17 amp 18 for removal and replacement of the brush rolls and belts a a Bissell 16 www bissell com ea ug310 5943_9200_608 indd 16 WARNING To reduce the risk of fire electric shock or injury unplug from outlet before servicing Let all parts dry completely before storing 800 237 7691 6 26 08 2 11 52 PM Maintenance and care Machine care continued 7 To clean attachments that may have been used remove from hose and rinse in clean running water Dry and replace attach ment in the tool caddy Clean the hose by suctioning clean water from the tap Before replacing lift end of hose and stretch out to ensure all water is cleared from hose Refer to page 13 illustrations 9 amp 10 After carpet is dry vacuum again to remove hair and fuzz Small belt removal and replacement Occasional replacement of one or both belts may become necessary If that is needed please follow the instructions below 1 o o N p www bissell com Turn off the machine and unplug it from the outlet Remove both the 2 in 1 water tank and the formula tank Set aside Unscrew th
27. s are done at a slower pace Other maintenance or service not included in the manual should be performed by an authorized service representative Thank you for selecting a BISSELL product Please do not return this product to the store For any questions or concerns BISSELL is happy to be of service Contact us directly at 1 800 237 7691 A Bissell 20 www bissell com 800 237 7691 ug310 5943_9200_608 indd 20 6 26 08 2 11 56 PM BISSELL Consumer Services For information about repairs or replacement parts or questions about your warranty call BISSELL Consumer Services 1 800 237 7691 Monday Friday 8 a m 10 p m EST Saturday 9 a m 8 p m EST Or write BISSELL HOMECARE INC PO Box 3606 Grand Rapids MI 49501 ATTN Consumer Services Or visit the BISSELL website www bissell com When contacting BISSELL have model number of unit available Please record your Model Number Please record your Purchase Date NOTE Please keep your original sales receipt It provides proof of date of purchase in the event of a warranty claim See Warranty on page 24 for details A Bissell www bissell com as 800 237 7691 21 ug310 5943_9200_608 indd 21 6 26 08 2 11 56 PM Replacement parts BISSELL ProHeat 2X Item Part No 1 203 6611 2 203 6660 3 203 6618 4 203 6675 5 203 6676 6 203 6677 7 203 6678 8 203 6679 9 203 6845 10 203 6680 11 203 6681 12 203 6682 13 203 6685 14 203 6686 15 203 6688 16
28. s guide for a full selection of cleaning formula available for purchase For a complete list of replacement parts cleaning formulas and accessories available for your BISSELL deep cleaner please visit www bissell com or contact BISSELL Consumer Services at 800 237 7691 www bissell com ug310 5943_9200_608 indd 23 A 800 237 7691 23 6 26 08 2 12 01 PM Warranty BISSELL ProHeat 2X his warranty gives you specific legal rights and you may also have other rights which may vary from state to ate If you need additional instruction regarding this warranty or have questions regarding what it may cover ease contact BISSELL Consumer Services by E mail telephone or regular mail as described below imited One Year Warranty ubject to the EXCEPTIONS AND EXCLUSIONS identified below upon receipt of the product BISSELL omecare Inc will repair or replace with new or remanufactured components or products at BISSELL s option ee of charge from the date of purchase by the original purchaser for one year any defective or alfunctioning part See information below on If your BISSELL product should require service This warranty applies to product used for personal and not commercial or rental service This warranty does not apply to fans or routine maintenance components such as filters belts or brushes Damage or malfunction caused by negli gence abuse neglect unauthorized repair or any other use not in accordance with t
29. spoon or spatula Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery If the area has dried remove the remaining semi solids and residue with a sweeper or vacuum Be sure to test any spot removal formulas in an inconspicuous area first This is important as some dyes and materials could be dam aged or discolored by cleaning solvents If such a change should occur try a different solution or call a professional If cleaning on Berber carpeting gently run your machine over a hidden area If no fuzzing occurs continue cleaning in soiled area Using the BISSELL Tough Stain PreCleaner spray evenly over soiled area Do not over wet Wait 3 5 minutes Gently work the solution by blotting area with a clean damp color safe cloth Clean using either the FLOOR CLEANING or TOOLS setting on the ReadyTools dial Bissell Pay ug310 5943_9200_608 indd 14 800 237 7691 6 26 08 2 11 51 PM Operations Hard floor cleaning Your ProHeat 2X model may have come with a hard floor attachment and Hard Floor Solutions Formula If not these products are available for purchase by contacting the BISSELL Consumer Services department by phone or at the website The hard floor tool provides effective cleaning for linoleum vinyl and tile floors Caution Do not use on unsealed hardwood floors 1 Vacuum or sweep thoroughly to pick up any loose debris and pet hair 2 Move any
Download Pdf Manuals
Related Search