DASYS High Speed Dome User`s manual
Contents
1. A1 SCAN Move the cursor to SCAN NO and press the key IRIS ON key on control keyboard to enter the edition mode of scan No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to T TLE and press R S ON to enter the edition mode of scan title C1 START MOVE the cursor to START and press R S ON to start the current scan D1 lt LEFT LIMIT gt Move the cursor to lt LEFT LIMIT gt and press IRIS ON to start setting the left limit of the current scan Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm E1 RIGHT LIMIT Move the cursor to RIGHT LIMIT and press IRIS ON to start setting the right limit of the current scan Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm F1 SCAN SPEED Move the cursor to SCAN SPEED and press IRIS ON to enter the edition mode of scan speed Move the joystick upward and downward to select a speed scale then press IRIS ON to confirm The speed scale ranges from 1 30 17 C SEQUENCE SEQUENCE gt SEQ NO 1 TITLE SEQ 1 START SEQUENCE SET DELETE MOTION lt SCAN gt ZONES TIMING ACTION AUTO TRACKING BACK EXIT A1 SEQ NO Move the cu2. lt PRIVACY MASK gt lt CLOCK gt lt PASSWORD gt lt DOME TITLE gt OTHERS BACK EXIT 1 ALARM NO Move the cursor to ALARM press IRIS ON to select the channel No of alarm input When the channel No has been changed the system will update all the relative settings and displayed data B1 INPUT STATE Move the cursor to INPUT STATE press IRIS ON to set the current state of alarm input as open or close 23 61 ALARM MODE Move the cursor on ALARM MODE to set the current mode of alarm as ON OFF and AUTO D1 TRIGGER ACTION Move the cursor on TRIGGER to set the action type triggered by alarm such as presets sequence pattern and scan E1 ALARM OUT Move the cursor to ALARM OUT to select the alarm output channel F1 CANCEL TIME Move the cursor to CANCEL TIME to set the duration of the alarm state G1 START TIME START TIME means the time for opening the alarm vvhen the alarm mode is auto H1 STOP TIME STOP TIME means the time for closing the alarm when the alarm mode is auto C AUX DOME SETTINGS AUX1 OFF AUX2 OFF B1 PRIVACY gt lt CLOCK gt PASSWORD DOME TITLE OTHERS BACK EXIT Move the cursor to open or close the AUX 24 D PRIVACY MASK DOME SETTINGS PRIVACY MASK rz MASK NO 1 A1 lt ALARM gt ENABLE OFF B1 lt AUX gt JGETs C1 D1 lt PASSWORD gt lt DOME TITLE gt
3. MENU LANGUAGE ENGLISH SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt lt SCAN gt lt SEQUENCE gt PATTERN lt ZONES gt lt CAMERA gt EMOTION RESTART FACTORY DEFAULTS HELP TIMING ACTION AUTO TRACKING m gt BACK EXIT A PRESET MOTION PRESET PRESET NO 001 lt SCAN gt TITLE PRESET 01 lt SEQUENCE gt PATTERN ZONES TIMING ACTION AUTO TRACKING CALL SET DELETE BACK EXIT BACK EXIT A1 PRESET NO Move the cursor to PRESET NO press the key IRIS ON key on control keyboard to enter the edition mode of preset No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of preset title C1 CALL MOVE the cursor to CALL and press IRIS ON to call upon the current preset position D1 SET Move the cursor to SET and press IRIS ON the enter preset setting mode Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick to do PTZ move and press IRIS ON to confirm the preset you want E1 DELETE Move the cursor to DELETE and press IRIS ON to delete the current preset position 16 B SCAN MOTION PRESET SCAN NO 01 FPE SCAN TITLE SCAN 1 SEQUENCE START lt LEFT LIMIT gt TIMING ACTION TRACKING gt
4. base plate as a location to bore 3 holes on the ceiling 2 Bore 3 holes on the ceiling 3 Mount 3 expansion screvvs into the holes Ihe 3 expansion screws 4 To lock the base plate to the dome housing line up the A and B tabs on the dome body with the A and B label on the dome base Push in on the tabs Insert one side and then the other side Continue pushing one the ends of the tabs until both sides click into place Make sure the plug in on the dome body is fully locked by the socket on the base plate Then press the dome body lightly and check if the dome body is fully locked to avoid shedding and abrasion with the dome cover locators 5 Match the 3 locators on the housing vvith the gaps one the plate and then turn the housing clockwise Then pull down the housing lightly to check the firmness of installation Then screw on the dome cover to the dome housing Match the three locators on the housing with the gaps one the plate Turn the housing Clockwise 6 Cable Connection Power Cord AC24V 50 2 Connect with amp C24 Power Adaptor wi EL E ry x em 2 y h Shield Twisted Pair Connect to Control Panel or Computer Monitor Cable 75ohm coaxial Cable II m o Settings 5 1 Interface TEAMINAL STEABLE RESISTANCE xn INPUT INS A ING GND 1 C CLOSED ALARM AC M PUBLIC Ao oen OUTPUT 2 C CLO
5. lt OTHERS gt BACK EXIT A1 MASK NO Move the cursor to MASK NO to set the NO of privacy mask zone B1 ENABLE Move the cursor to ENABLE to enable or disable the privacy mask zone C1 lt SET gt Move the cursor to lt SET gt and press IRIS ON to enter the edition mode of privacy mask zone Then the sentence PRESS IRIS ON TO CONFIRM will be displayed on the monitor Use joystick to move the dome to the area you want to cover and press IRIS ON to confirm There will be a privacy zone in the middle of the monitor Move joystick upward downward leftward and rightward to adjust the size of privacy zone D1 DELETE Press IRIS ON to delete the current privacy zone E CLOCK DOME SETTINGS DATE TIME 2008 01 01 ALARM AUX TIME 00 00 PRIVACY MASK gt EM CLOCK PASSWORD DOME TITLE OTHERS BACK EXIT CANCEL A1 DATE Move the joystick leftward and rightward to select year month and day Move the joystick upvvard and dovvnvvard to select the number B1 TIME Move the joystick leftward and rightward to select hour and minute Move the joystick upward and downward to select the number F PASSWORD DOME SETTINGS PASSWORD gt EDIT PASSWORD gt M lt AUX gt ENABLE OFF B1 MASK gt DOME lt OTHERS gt BACK EXIT A1 EDIT PASSWORD The factory default password is 111111 The old password i
6. 8 Preset Positions 7 Patten Tours Privacy Zone 8 zones 3 2 Camera Parameter for High speed Dome Sub Model TC D2618B TC D2618BS TC D2626BS TC D2636BS TC D2622BS TC D2627BS TC D2630BS NS 1 4 SONY 1 4 SONY Exview HAD CCD 1 4 SONY 1 4 SONY Exview Super HAD Super HAD HAD CCD CCD CCD Horizontal 480TVL 520TVL ua xi Camera SONY SONY 480 SONY 980P SONY 1000P CNB VP 200L LG SANYO IN NM Focus Length F4 1mm 73 68mm F3 5mm F3 4mm F3 9mm 85 8 F3 25mm F3 5mm 7 277 ELM Zoom Digital Zoom Zoom 1 0Lux 0 7 Lux 1 0 Lux 0 01 1 4 Lux 0 01 1 0 Lux 0 05 0 01 Lux Video Output 1Vp p75 ohms Back Light Auto is ooo S N Ratio 55048 1 50 1 10 1 1 1 10000s 1 50 1 10000s 1 1 1 10000s 000s 4 Installation Guide 4 1 Installation Preparation Video Coaxial Cables Mode Max Distance RG59 U 750ft 229m RG6 U 1 000ft 305m RG11 U 1 500ft 457m 4 2 Structure Base Plate Dune Body Dome Housing 4 3 Installation Size 4 4 Installation Procedures Notice The surface mount speed dome should be applied to hard ceiling The wall must be thick enough to install the expansion screws and can bear 4 times the weight of the dome camera itself 1 Open the reverse turning board on the base plate Use the 3 holes on the bottom of the
7. TRACKING gt BACK EX T A1 PATTERN NO Move the cursor to PATT and press the key IRIS ON key on control keyboard to enter the edition mode of sequence move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence title C1 START MOVE the cursor to START and press IRIS ON to start the current Pattern D1 lt SET gt Move the cursor to SET and press IRIS ON the enter pattern setting mode Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick to do PTZ move and press IRIS ON to confirm E1 DELETE Move the cursor to DELETE and press IRIS ON to delete the current pattern 19 E lt ZONES gt MOTION EZ ZONE IS NOT SET ZONE NO 1 TITLE NO ZONE 1 lt LEFT LIMIT gt lt RIGHT LIMIT gt DELETE lt PRESET gt lt SCAN gt lt SEQUENCE gt PATTERN 1 lt TIMING ACTION gt lt AUTO TRACKING gt BACK EXIT BACK EXIT A1 ZONE INFORMATION B1 ZONE NO Move the cursor to ZONE NO and press the key IRIS ON key on control keyboard to enter the edition mode of zone No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of zone title C1 lt LEFT LIMIT gt Move the cursor to lt L
8. vvarranty 2 Installation Avoid heavy stress and violent vibration during installation Don t touch the dome cover directly by hand When connecting the power source please follow all electric safety standards and only use the power supply designated for this device Keep the video and control signal in a decent distance from high voltage devices and cable Don t apply power to the dome before finishing the installation 3 Dismantlement Please don t dismantle the devices in the dome body Only the professional personnel authorized can operate the maintenance 4 Internal Environment Keep metal and inflammable material away from dome body to avoid fire short circuit and damage Please prevent all liquids material from entering the dome If occur this please shut down the power and pull out the plug Then inform the technical personnel immediately 5 Electrical Safety The video image would be interfered when the dome is installed near television radio transmitter voltage changer and audio amplifier 6 Camera Protection Avoid shooting very bright objects directly into the camera s CCD such as the sun or light fittings 7T Cleaning Method Please don t use abrasive and violent detergent to clean the dome Please choose dry fabric and neutral detergent Use lens paper to clean the lens 2 Features 2 1 Built in Decoder Power off protection no data loss 220 programmable presets 8 cruising tracks each cruising track h
9. EFT LIMIT gt and press IRIS ON to start setting the left limit of the current zone Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm E1 RIGHT LIMIT gt Move the cursor to RIGHT LIMIT and press IRIS ON to start setting the right limit of the current zone Then the sentence PRESS IRIS ON TO CONFIRM will appear on the screen Move the joystick and press IRIS ON to confirm F1 DELETE Press IRIS ON to delete the current zone 20 F TIMING ACTION TIMING ACTION lt PRESET gt NO START STOP MOTIO lt SCAN gt 00 00 00 00 NONE lt SEQUENCE gt 00 00 00 00 NONE lt PATTERN gt 00 00 00 00 NONE lt ZONES gt 00 00 00 00 NONE 00 00 00 00 NONE 00 00 00 00 NONE 00 00 00 00 NONE 00 00 00 00 NONE OFF MON COPY BACK m m ya a ACTION gt AUTO TRACKING o RW Nm A1 SHEDULE NO B1 START Start time of timing action C1 STOP Stop time of timing action D1 MOTION Timing action modes PRESET 1 8 SCAN 1 4 SEQUENCE 1 4 PATTERN 1 4 E1 ON OFF Press IRIS ON to enable or disable the timing action F1 COPY User can copy a schedule to other 6 days in a week G1 BACK Go back to upper menu 21 G AUTO TRACKING AUTO TRACKING lt PRESET gt lt SCAN gt lt SEQUENCE gt lt PATTERN gt lt ZONES gt ENABLE OFF Cl TIMING ACTION TRACKING SENS
10. IC NOTICE This item is only for the camera module with WDR function Trouble Shooting Povver on no movement Povver line connected vvrong no image indicator light Povver damaged does not light Povver line be connected bad Check it Povver on self check has The machine s address code or image can t control baud rate is vvrong necator Ugnt ages Protocol wrong Correct it flicker RS485 bus be connected wrong Check it Image is dim Focus in manual state Dome is dirty Change a certified power supply Fan does not rotate Fan is connected wrong Check it 29
11. ITIVITY 06 Al FRAMERATE MID Bl A1 SENSITIVITY Secitivity of auto tracking funtion Scale from1 to 15 B1 FRAME RATE Setting of the frame inspection rate C1 ENABLE Enabel or disable the auto tracking function Notice The auto tracking function is only for the speed dome with the camera module which support auto tracking DOME SETTING MAIN MENU DOME SETTINGS LANGUAGE ENGLISH lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt DOME SETTINGS gt lt PRIVACY MASK gt lt CLOCK gt lt CAMERA gt lt PASSWORD gt lt MOTION gt lt DOME TITLE gt I OQ mu O gt OTHERS RESTART FACTORY DEFAULTS BACK HELP EXIT EXIT 22 DOME SETTINGS IDLE 30 SEC A1 ACTION NO ACTION B1 MASK PASSWORD DOME TITLE OTHERS BACK EXIT A1 IDLE ACTION Move the cursor to TIME press IRIS ON to enter the edition mode of idle action starting time The time could be 30seconds 2 minutes 5 minutes or 10 minutes Press IRIS ON to confirm B1 ACTION Move the cursor to ACTION and press the key IRIS ON to edit the idle action type like preset Scan sequence or none B ALARM DOME SETTINGS ALARM SETTING INPUT STATE CLOSE ALARM MODE OFF TRIGGER ACTION ALARM OUT OFF OUT1 OUT2 ALL CANCEL TIME 10SEC START TIME 00 00 STOP TIME 00 00 BACK EXIT
12. OP TIME The dome will stop PTZ move after a certain period when the stop code is not received by dome The period could be 5 15 30 60 seconds E1 MENU OFF TIME The OSD menu will be automatically closed when there is not any operations for a certain period The period could be 1 2 5 10 minutes F1 NORTH SET Move to cursor to NOTTH SET and press IRIS ON to set the direction null point 27 CAMERA MENU LANGUAGE ENGLISH SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT A AUTO FOCUS B DIGITAL ZOOM C BACKLIGHT CAMERA SETTING ET AUTO FOCUS OFF DIGITAL ZOOM OFF BACKLIGHT OFF IMAGE FREEZE OFF ZOOM SPEED LOW NORMAL HIGH DAY NIGHT AUTO BW COLOR ADVANCED G UP BACK EX T VVhen the light is dim please open the backlight compensation to make the image bright D IMAGE FREEZE E ZOOM SPEED LOW NORMAL HIGH F DAY NIGHT AUTO BW COLOR G lt ADVANCED gt CAMERA SETTING AUTO FOCUS OFF DIGITAL ZOOM OFF BACKLIGHT OFF IMAGE FREEZE OFF ZOOM SPEED LOW NORMAL HIGH DAY NIGHT AUTO BW COLOR lt ADVANCED gt BACK EXIT ADVANCED WHITE BALANCE AUTO RED GAIN 064 BLUE GAIN 212 BRIGHT 06 EXPOSURE AUTO WIDE DYNAMIC OFF A1 WHITE BALANCE AUTO MANUAL INDOOR OUTDOOR B1 RED GAIN C1 BLUE GAIN D1 BRIGHT E1 EXPOSURE F1 WIDE DYNAM
13. SED 2 M PUBLIC AO2 AC24V SGND AC24V power supply 5 2 Dome Address Transmission Speed Protocol Setting Before the dome is installed the communication protocol baud rate and dome address should be confirmed Set the DIP switch keeping the setting consistent with the control system The relative DIP switch site and connecting wires are diagramed below for reference SW2 SW1 Dome address set Notice 1 means on status and 0 means off status Protocol Setting Protocols pecon o 1 o Notice The factory default protocol is PELCO D Transmission Speed Setting Dome Address Setting PELCO P Address Bit1 Bit2 Bits Bit6 Bits o o 0 2 1 0 0 0 L8 1 o 1 9 9 9 9 o 0 PELCO D Address Bit 1 Bit2 Bit Bit Bits a j 0 0 0 2 001 0 jo fo 0 200 3000 0 0 6 Preset Setting Speed dome camera supports 220 preset positions The code numbers 1 64 and 100 255 represent the 220 preset positions You can activate some special functions by calling upon code number 65 99 Start Auto Scan Call upon 99 Default to start the first group of auto scan Start Sequence Call upon 98 Default to start the first group of sequence Start Pattern Tours Call upon 97 Default to start the first group of Pat
14. TC D2600BS SERIES HIGH SPEED DOME CAMERA USER S MANUAL Table Of Contents UE ioci A o ETE 2 Zub 3 2 1 Built in Decod6el yuyayuku n 9 2 2 Integrated Universal Speed Change Rotator 2 3 Built in High Definition Color Camera SE ese MBit 4 3 1 Technical Parameters of the High speed Dome 4 3 2 Camera Parameter for High speed Dome 4 A Installauor 3l e a uu u u EH pc tx 5 4 1 Installation Preparation 5 a 5 4 9 installaMon 91262 uuu uuu ad da amala dayla 6 4 4 Installation Procedures 6 CIOS m aaa R TTE RUM 9 5 2 Dome Address Transmission Speed Protocol Setting 9 24 5272 1 16 7 Ihe 56 q 7 1 Operations Method of the Menu 14 OSD Menu 15 9 Irouble Smoolll gustos un 29 1 Precautions 1 Transportation Security No heavy stress violent vibration or vvater splash are allovved during transportation storage The unit should be transported in separated packing n shipments of distributor and delivery of maintenance any damages caused by integral packing are not covered by
15. as 32 preset positions 4 pattern tours each one with 180s memory RS 485 bus 8 groups of auto scan the left and right boundary and scan speed can be set Pelco P and Pelco D compatible 6 alarm inputs and 2 outputs Message display function lens coordinate value temperature and alarm information can be showed Guard location the dome can operate preset auto scan cruising and pattern tours functions after a short pause Alarm triggering the alarm can trigger preset auto scan cruising and pattern tours functions 2 2 Integrated Universal Speed Change Rotator Delicate stepping motor stable sensitive and accurate 360 continuous pan without blind area Stepless speed change auto zoom speed matching Auto overturn function Manual speed Pan 0 01 180 S Tilt 0 04 120 5 Presets calling speed 500 S 2 3 Built in High Definition Day Night Camera Auto iris auto back light compensation Auto manual white balance Auto manual focus Auto manual brightness control 480TV line Multiple kinds of camera for options Technical Data 3 1 Technical Parameters of the High speed Dome Model TC 2600BS High Speed Dome Power Supply AC24V 2 5A Power Consumpton bow 0 Communication transmission speed 2400 4800 9600BPS Pelco D Pelco P Compatible Pan Rotation 0 01 180 5 Tilt Rotation 0 01 120 s Pan Tilt Accuracy 0 07 Preset Speed 500 s Pan Angle 360 Continuously 0 82
16. ed the user press ris on to enter BACKLIGHT setting 1 BACKLIGHT ON OFF 2 Press Focus in out to select wanted item 3 And then press Iris on to preserve the selected items or press ris off to cancel the selected item and go back to previous Menu 4 After all the function settings are settled down switch to the item No 16 and press ris on to quit from the menu 14 7 2 OSD Menu Tree MENU ANGUAGE ENGLISH lt SYSTEM INFORMATION lt DISPLAY SETUP gt lt DOME SETTINGS gt lt CAMERA gt lt MOTION gt RESTART FACTORY DEFAULTS HELP EXIT MOTION lt SCAN gt lt SEQUENCE gt PATTERN ZONES TIMING ACTION AUTO TRACKING BACK EXIT 15 SYSTEM INFORMATION DOMEID 0123456789 ADDRESS 00 1 BAUDRATE 9600 N 8 1 PROTOCOL TIANDY TEMP 31 ALARM 000000 00 EX T DISPLAY OFF PRESET OFF MOTION OFF ZONES OFF DATE TIME OFF PAN TILT OFF 2SEC 5SEC 10SEG ALARM OFF lt DISPLAY POSITION gt BACK EXIT DOME SETTINGS lt ALARM gt lt AUX gt PRIVACY MASK gt lt CLOCK gt PASSWORD DOME TITLE OTHERS BACK EXIT CAMERA SETTING UTO FOCUS OFF DIGITAL ZOOM OFF BACKLIGHT OFF IMAGE FREEZE OFF ZOOM SPEED LOVV NORMAL HIG DAY NIGHT AUTO BW COCLOR ADVANCED BACK EXIT
17. p N upon pp set 86 Stop setting pattern Call upon 96 Eyer Restore factory setting Call upon 82 U Start idle action Call upon 79 Stop idle action Set 79 PP means function No 1 4 1 means preset position default as No 1 preset position 2 means auto scan default 13 Set idle action Set 77 call upon pp as scan of group 1 3 means cruise default as sequence of group 1 4 means pattern tour default as pattern tour of group 1 A Set idle time Set 72 call upon pp PP means idle time 1 4 min 12 1 means ptz location information 2 means temperature control information Display information Set 74 call upon pp 3 means alarm information 4 means system status system 5 means product D No and Version No PP means function No 1 4 1 means preset position the first alarm input triggers the second alarm input and then the second alarm input vvill trigger the third alarm input and by analogy Set alarm triggering Set 76 call upon pp 2 means auto scan default as scan of group 1 3 means cruise default as cruise of group 1 4 means pattern tour default as pattern tour of group 1 Start alarm triggering Call upon 78 Open the alarm output Call upon 80 upon call upon 70 n means auxillary svvitch Call upon 860 z call No 1 2 Close the alarm n uponn set 70 Set pri
18. rsor to SEQ NO and press the key IRIS ON key on control keyboard to enter the edition mode of sequence No move the joystick upward and downward to select number Then press IRIS ON to confirm B1 TITLE Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence title C1 START MOVE the cursor to START and press IRIS ON to start the current sequence D1 S SEQUENCE SET Press IRIS ON to enter into the sequence setting SEQUENCE SEQUENCE SEQ NO 1 l PRESET INTERVAL TITLE SEQ 1 002 03 START 001 03 r gt SEQUENCE SET gt Ll 2 DELETE 04 05 06 003 BACK Move the cursor to ED T and press IRIS ON to enter edition mode Move the joystick rightward and leftvvard to select item a When the lt gt is on the item move joystick upward and downward to select the NO of the preset in a sequence There are up to 32 presets in a single sequence b When the lt gt is on the item PRESET move the joystick upward and downward to select the 18 preset NO you vvant to add in the sequence c When the lt gt is on the item INS move the joystick upward and downward to select edition mode as insert ok and delete d Press IRIS OFF to quit the edition D PATTERN MOTION PATTERN lt PRESET gt r PATTERN NO 1 lt SCAN gt TITLE PATTERN 1 lt SEQUENCE gt Sones b 2 PATTERN lt ZONES gt 557 TIMING ACTION sl AUTO
19. s needed before setting a new one B1 ENABLE Enable or disable the password protection for OSD menu G DOME TITLE DOME SETTINGS DOME TITLE SET 5 INPUT lt ALARM lt AUX gt CAPS B1 PRIVACY MASK gt ABCDEFGHIJ lt CLOCK gt KLMNOPQRST C1 PASSWORD UVV XYZ TITLE OTHERS BACK EXIT CANCEL A1 INPUT Move the cursor to INPUT and press IRIS ON to enter the title edition mode 26 B1 Move the cursor to CAPS Press IRIS ON and move the joystick upward and downward to select capital and small letters C1 ALPHABET Move the cursor to alphabet and press IRIS ON to select letters H OTHERS DOME SETTINGS OTHERS lt IDLE gt CONTROL COOL AUTO HEAT OF A 1 PRESET FREEZE OFF ox lt AUX gt AUTO FLIP ON 7 MASK gt AUTO STOP TIME 30SEC 1 lt gt PASSWORD gt MENU OFF TIME 5MIN am lt DOME TITLE gt lt NORTH SET gt on BACK EXIT A1 TEMP CONTROL Move the cursor to TEMP CONTROL and press IRIS ON to select the temperature control mode as COOL AUTO HEAT OFF B1 PRESET FREEZE Move the cursor to PRESET FREEZE and press IRIS ON to set preset freeze function When the dome is shifting from one preset to another the image on the monitor will not change until the preset calling is done C1 AUTO FLIP Move the cursor to AUTO FLIP and press IRIS ON to enable or disable auto flip function D1 AUTO ST
20. tern Tours Stop Auto mode End Call upon 96 setting Set the right limit for Set 93 scan 2 Set the left limit for Set 92 scan Set 87 Call upon pp Start setting preset Set 84 Call upon PP means the No of preset position for sequence ppt position max 32 qq means 3 standing time 1 60s default position for sequence to set the first group Set residence time for Set 83 Call upon qq sequence Start pattern tours setting Default to set the first group Stop pattern tours Call upon 96 Call upon 80 call N upon pp call upon 99 Set the right limit for Call upon 80 call the scan of group N upon pp set 93 Set the left limit for the Call upon 80 call scan of group N upon pp set 92 Default to set the first group PP means speed value 1 30 PP means group No 1 8 qq means speed value 1 30 Set the speed for group Call upon 80 call upon pp set 87 call upon aq 11 Start sequence of Call upon 80 call group N upon pp upon 98 Start setting preset Call upon 80 position for sequence upon pp r set 84 PP means group 1 8 of group N upon qqr qq means preset position No 6 Stop setting preset Call upon 96 max 32 position for the n means standing time 1 sequence of group N 60s Set standing time for Call upon 80 call the sequence of group upon pp r set 83 N upon n Start pattern tour of Call upon 80 z call tour of grou
21. vacy zone of Call upon 80 z call set 71 77 PP privacy zone number 1 8 Delete privacy zone of Call upon 80 call groupn upon pp upon71 Start privacy zone function Close privacy zone function Notice 1 Call upon n means upon preset position n 2 Set n means set preset position n 3 Set m n means set preset position m firstly and then call upon preset position n 4 Set m call n means set preset position m firstly and then call upon preset position n means the user can call upon several preset positions 13 7 The OSD Menu Setting 7 1 Operation Method of the Menu The user can call upon preset position 95 to enter the setting interface of the OSD menu After entering the setting menu a rovv of information vvill be displayed as follovvs the screen can only show a single step item of the following menu The operations will be implemented by commands as Focus in out and Iris on off Focus in Up Focus out Dovvn ris on Confirm ris off Cancel The user can also operate the OSD menu by Joystick Up Move the joystick upward to select Down Move the joystick downward to select Left Move the joystick leftward to confirm Right Move the joystick rightward to cancel For example 1 In status as the previous picture show
Download Pdf Manuals
Related Search