VTech ia5824 Specifications
Contents
1. e Caller ID numbers may appear with an area code that may not be required for local calls or without a 1 that may be needed for long 3 Press SELECT then press y or A until PROGRAM flashes then press SELECT again distance calls a 4 You will be given the option to edit the name and press SELECT ee N f J H Then you can edit the number and press SELECT a not select in 2 a hi the correct e 5 Press A or W to select Y or N for distinctive ringer format press 3 repeatedly to 6 Press SELECT You ll hear a confirmation beep If you choose Y a eae in step 5 a fi will be displayed with the directory entry L J Vatican choose to dial with or Display screen messages without the area code and with or Screen displays When without the 1 The other party is blocking name and or number information Your phone company is unable to receive information about this caller s name and or number after name This caller has called you more than once www vtechphones com 27 e If you repeatedly get a low battery indicator even after charging overnight the battery should be replaced e To reduce the risk of fire or injury to persons or damage to the telephone read and follow these instructions carefully Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in2. 44 Ending calls 9 Erase a directory entry 19 Erase a speed dial entry 23 F FCC ACTA and IC regulations 41 42 H Handset layout 7 Handset operation 9 Handset ringer style battery save 13 Headset 6 l If you subscribe to DSL service 5 Important safety instructions 40 Installation 2 6 Install handset battery 3 Internet 5 L Limited Warranty 38 39 M Maintenance 38 Making calls 9 Move a directory entry to the speed dial 19 0 Operating range 14 www vtechphones com P Parts check list 1 R Reassign locations in speed dial 23 Replace the handset battery 28 Review call history 25 Ringer volume 13 S Set dial mode 12 Set handset date and time 12 Set language 12 Speed dial 21 22 23 Store a call history record in the directory 26 Store a directory entry 17 Store a speed dial entry 21 T Table of contents i ii Technical specifications 43 Telephone base layout 8 Telephone base operation 11 Telephone operation 7 16 Temporary tone dialing 14 The RBRC seal 42 Troubleshooting 29 37 V Voice mail 15 Index Voice mail indicator 11 Volume 10 13 Ww Wall mounting 4 www vtechphones com 45 VTECH TELECOMMUNICATIONS LTD A member of THE VTECH GROUP OF COMPANIES Distributed in the U S A by VTech Communications Inc Beaverton Oregon Distributed in Canada by VTech Telecommunications Canada Ltd Richmond B C Copyright 2007 for VTECH TELECOMMUNICATIONS LTD Printed
3. 3 Press SELECT The screen displays the name and number The cursor appears at the beginning of the name Press V A and the dial pad keys to edit the name Press SELECT to move on to edit the number Press then press CHAN REMOVE to backspace and make corrections Press SELECT to move to edit the distinctive ring setting 4 Press SELECT to save the edited information www vtechphones com Speed dial Erase a speed dial entry 1 Press and hold the speed dial location key 1 through 9 of the entry you wish to delete 2 When the screen displays the entry you want to delete press SELECT Then press Wor A until e Whenever the ERASE flashes EERE 3 Press SELECT The screen displays ERASE NO YES and the number 4 Press A until YES flashes 5 Press SELECT You ll hear a confirmation beep Dial a speed dial number 1 Press and hold the speed dial location key 1 through 9 of the entry you wish to dial 2 Press TALK FLASH to dial the displayed memory number Reassign locations in speed dial 1 Press and hold the speed dial location key 1 through 9 of the entry you want to reassign 2 When the screen displays the entry you want to reassign press SELECT Then press wor A until SPEED flashes 3 Press SELECT The screen displays ENTER 1 9 4 Press the keys 1 through 9 to reassign this entry into another memory location You ll hear a confirmation beep SPEEO www vtechphones com phone
4. wall mounting desktop bracket e Insert the lower portion tabs of the bracket into the upper grooves of the telephone base e Snap the upper portion tabs of the bracket into place e To remove the bracket press both upper portion tabs firmly inward and pull the bracket upward until it is released from the grooves www vtechphones com Installation If you subscribe to DSL service If you receive high speed internet through your telephone line commonly referred to as DSL and you are experiencing interference during conversations and or your caller ID features aren t functioning properly install a DSL filter to the telephone line between the telephone base and the telephone line jack Contact your DSL provider to obtain a DSL filter To single telephone jack RJ11C Telephone Ine cen DSL filter For DSL users www vtechphones com 0 e gt Co 7 A o mi a Installation Belt clip optional vtech vtech vtech To attach To remove Headset jack You can use this telephone handsfree when you install any VTech 2 5 mm headset purchased separately Plug the headset into the jack located on the right side of the handset under the small rubber flap Do not force the connection but make sure the plug fits securely To purchase a headset visit us on the web at www vtechphones com or call us at 1 800 595 9511 In
5. 16 hours If the above measures do not correct the problem the battery may need to be replaced www vtechphones com UO BUOJUI jeuonippy Troubleshooting Problem The battery does not charge in the handset or the handset battery does not accept charge The CHARGE light is off 30 Suggestion e Make sure the handset is placed in the charger correctly The CHARGE light on the telephone base should be on e Remove the battery from the handset and install it in the spare battery compartment on the side of the telephone base and let it charge for 16 hours Then re install the charged battery into the handset If the cordless handset is in the telephone base but the CHARGE light is not on refer to The charge light is off in this section It may be necessary to purchase a new battery Please refer to the Batteries section on page 28 of this user s manual The telephone might be malfunctioning Please refer to the Warranty section on pages 38 to 39 of this user s manual for further instruction Clean the charging contacts on the cordless handset s and telephone base each month using a pencil eraser or a dry non abrasive fabric Make sure the power adapter and telephone line cords are plugged in correctly and securely Unplug the power adapter Wait for 15 seconds before plugging it back in Allow up to one minute for the cordless handset and telephone base to reset The telephone might be malfunctioning Please refe
6. 6 7 P Q R S 7 8 T U v 8 fe w x Y z 9 0 0 A amp www vtechphones com e The entries you stored in speed dial memory will be marked with 01 through 09 in the telephone directory e Press OFF at any time to exit speed dial mode 21 Ww o o i e TS p o fe 22 Speed dial Store a speed dial entry 6 When you finish entering the name press SELECT or PROG The screen displays ENTER NUMBER 7 Enter the telephone number Press y then press CHAN REMOVE to backspace and make corrections Press REDIAL PAUSE if you wish to store pauses in the dialing sequence A P will display when a pause has been successfully inserted OR Press REDIAL PAUSE to display the last number dialed from this phone 8 Press SELECT or PROG to store your entry The screen displays DISTINCT RING and the current setting 9 Press wor ato change the setting Choose Y for yes if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pattern after the first ring Choose N for a normal ringing pattern 10 Press SELECT or PROG to confirm your selection If you chose Y a H will be displayed with the speed dial entry Edit a speed dial entry 1 Press and hold the memory location key 1 through 9 of the entry you wish to edit 2 When the screen displays the entry you want to edit press SELECT Then press Y or A until EDIT flashes
7. allow all of them to ring simultaneously Try unplugging some of them If the other telephones in your home are having the same problem the problem is in the wiring or local service Contact the local telephone company charges may apply Other electronic products can cause interference to your cordless telephone Try installing your telephone as far away as possible from the following electronic devices wireless routers radios radio towers pager towers cellular telephones digital telephones intercoms room monitors televisions VCRs personal computers kitchen appliances and other cordless telephones Test a working telephone at the telephone jack If another telephone has the same problem the problem is in the telephone jack Contact your local telephone company charges may apply The telephone line cord might be malfunctioning Try installing a new telephone line cord Re install the battery pack and place the cordless handset in the telephone base Wait for the cordless handset to synchronize with the telephone base Allow up to one minute for this to take place www vtechphones com Troubleshooting Problem Suggestion My handset does not Make sure you have the ringer activated Refer to the section s on ringer selection in this ring when receive user s manual a call Make sure the telephone line cord is plugged firmly into the telephone base and the telephone jack Make sure the power cord is plugged in You may be
8. company is required to inform you of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone company is required to notify you if such changes are planned If this product is equipped with a corded or cordless handset it is hearing aid compatible If this product has memory dialing locations you may choose to store emergency telephone numbers e g police fire medical in these locations If you do store or test emergency numbers please www vtechphones com 41 gt Q ae e gt oi 5 h o e gt FCC ACTA and IC regulations Remain on the line and briefly explain the reason for the call before hanging up Perform such activities in off peak hours such as early morning or late evening Industry Canada This equipment complies with regulations RSS210 and CS 03 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met The Ringer Equivalence Number REN for this terminal equipment is 0 1 The REN is an indication of the maximum number of
9. in China v0 5 91 000906 040 100 tech Innovation Beyond Technology vtech User s manual www vtechphones com Innovation Beyond Technology
10. is in use call timer will be shown at the top right corner 23 W o 2 i e p o e 24 Caller ID Your phone has a caller ID CID with call waiting feature that works with service from your local phone service provider Caller ID with call waiting lets you see who s calling before you answer the phone even when you are on another call You may need to change your phone service to use this feature Contact your phone service provider if e You have both caller ID and call waiting but as separate services you may need combined service e You have only caller ID service or only call waiting service e You don t subscribe to any caller ID or call waiting services You can use this product with regular caller ID service and you can use this product s other features without subscribing to either caller ID or combined caller ID with call waiting service There are fees for caller ID services and they may not be available in all areas This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone companies use compatible equipment www vtechphones com Caller ID Caller s telephone number e If you answer a call before This party has called the information Caller s name more than once appears on the screen it will Position of call in call not be in the call history history e Press OFF
11. position The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under the table cabinet outlet SAVE THESE INSTRUCTIONS www vtechphones com FCC ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority
12. replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return repaired or replacement Products to you in working condition You should expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty this limited warranty also applies to repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representati
13. to operate the equipment To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The handset may be safely held against the ear of the user The telephone base shall be installed and used such that parts of the user s body other than the hands are maintained at a distance of approximately 20 cm 8 inches or more If you choose to use a clipping device please make sure to only use the supplied VTech belt clip FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments ACTA The label on the back or bottom of this equipment contains among other things a product identifier in the format US AAAEQ TXXXx This identifier must be provided to your local telephone company upon request The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant An RJ11 jack should normally be used for connect ing to a single line and an RJ14 jack for two lines See Installation Ins
14. too far from the telephone base Charge the battery in the handset for 16 hours For optimum daily performance return the handset to its base when not in use You may have too many extension phones on your telephone line to allow all of them to ring Try unplugging some of the other phones The layout of your home or office might be limiting the operating range Try moving the base to another location preferably on an upper floor If the other phones in your home are having the issue the problem is in your wiring or local service Contact your local telephone company charges may apply Test a working phone at the phone jack If another phone has the same problem the problem is the phone jack Contact your local telephone company charges may apply Other electronic products can cause interference with your cordless phone Try installing your phone as far away from these types of electronic devices as possible wireless routers radios radio towers pager towers cell phones intercoms room monitors televisions personal computers kitchen appliances and other cordless phones Your line cord might be malfunctioning Try installing a new line cord www vtechphones com UO BULOJUI jeuonippy Troubleshooting Problem cannot dial out hear other calls when using the telephone hear noise in the cordless handset and none of the keys or buttons work 34 Suggestion First try all the above suggestions Make sure
15. Canada go to www vtechcanada com or call us at 1 800 267 7377 www vtechphones com Telephone operation Handset layout TALK 7 _ FLASH ave RRi CHAN channel REMOVE Answer a call WCID VOL 1 2 4 VOL QA 7 SELECT 8 OFF 9 REDIAL PAUSE 10 PROG program onana wn Ww o o i e me o e 3 4 www vtechphones com 7 Telephone operation Telephone base layout 11 CHARGE IN USE 12 Message waiting indicator 13 FIND HANDSET FIND HANDSET www vtechphones com Telephone operation Handset operation Making calls e Press TALK FLASH then dial the number OR Dial the number press then press CHAN REMOVE to backspace then press TALK FLASH e To answer a call press TALK FLASH e To end a call press OFF Ending Calls e Press OFF to end your call OR Put the handset on the telephone base to end your call Answering calls e Press any key to answer a call except OFF A or FLASH e During a call press TALK FLASH to receive an incoming call if call waiting is activated CHAN e Press CHAN to switch to a clear channel while on a call REMOVE When viewing the call log press to delete the current record displayed While handset is in idle mode press and hold to delete all records in the call log V CID caller ID VOL and 4 VOL am
16. Table of contents Parts CHECKIISt oiish aR 1 Installation Connect power and telephone line cords 2 Choose location eeeeeeceeceeseceeeeeeseeeeeeeeeeeaeeneeeaeetenaes Install handset battery Wal MOU IMUM Oi sc reas acs cnsstectassersdeussecdssdss uss txaceasaeaasseabacs Desk table bracket installation 4 If you subscribe to DSL service BME CP racss 5 cp25 223 cca ser A Headset sername eaa eba een na set ass Tea deasaurauiesbasd Telephone operation FAMOSCHAY OUT 526 sci cescencesdebssezerecisaeads fstassieadetsacnasseebaes Telephone base layout seesssssesessesssteseseeeseeesees 8 Handset operation Telephone base operation eee eects teres 11 Set language Set dial mode Set handset date and time eeeceeceeseeeeeeeteeeeeteee Check for dial tone ee ceeeceeeeeeeeeeeeeeeeneeeeeneeneeeatees Charge the handset battery Handset ringer style battery SAVE 0 ee eeeeeeeteeeeeeee 13 Ringer VONIUMC essetis paaie aaea Re Ee Rah Temporary tone dialing Operating range ssssesssseeiesieieeisieisiisirnsinsrnriernrrernes VOCS Mail eeaeee aa e aaaea e Asa Clear voice mail alert Display screen MESSAGES essessessressesrirrerrerrreererresrs 16 DING CLOR Yas iececysteccttettetatessetentactcafdshanacanssusainescdsbacegcaebiaaess Store a directory entry we Edita directory QMUryccsscssccsiccessisessetsasiaveesdebesssesssesisness Erase a directory Ontry scsscscsessesesseeesee
17. ame number while in directory mode and there is not an entry for that letter NO DATA will be shown in the display 18 Directory 5 Enter the telephone number Press w then press CHAN REMOVE to backspace and make corrections Press REDIAL PAUSE to store a pause a P will be shown if necessary OR Press REDIAL PAUSE to display the last number dialed from this handset Press SELECT or PROG The screen displays DISTINCT RING and the current setting Press w or ato choose Y yes if you wish the phone to alert you to calls from this number by changing to a distinctive ringer after the first ring Choose N for a normal ringer Press SELECT or PROG to confirm If you chose Y in Step 7 a fi will be displayed with the directory entry Edit a directory entry HF 2 Press A The screen displays DIRECTORY Press or A to scroll alphabetically through entries stored in directory OR Press the dial pad key for the first letter of the entry you want to edit When the screen displays the entry you want to edit press SELECT Then press or A until EDIT flashes Press SELECT The screen displays the name and number The cursor appears at the beginning of the name Use and A and the dial pad keys to edit the name Press SELECT to confirm and move on to edit the number press Y then press CHAN REMOVE to backspace and make corrections Press SELECT to confirm and move to edit the distinc
18. at Time of call Date of call any time to exit call history Indicate whether the record is new or not About call history caller ID Your phone can store up to 45 calls in its caller ID CID memory When the memory is full the oldest call will automatically be deleted to make room for new incoming call information For each call that comes in the screen displays the following information between the first and second rings e Your callers name 15 letters are sent by your telephone company e The caller s area code and telephone number e The time and date of the call e The repeat tag in the upper right corner indicating the party has called more than once Review call history 1 Press Y CID to enter call history viewing mode 2 Use Wor Ato scroll through records in call history Ww o o i e xe p o e www vtechphones com 25 Caller ID Delete records from call history Delete a specific call e Caller ID numbers 1 Locate the record you want to delete from call history may appear with 2 Press the REMOVE key You ll hear a confirmation beep an area code Delete all calls that may not be 1 With the handset in idle off mode press and hold the REMOVE key The screen displays Aa a e ERASE ALL NO YES The current choice flashes a 1 that may be 2 Press A until YES flashes needed for long 3 Press SELECT You ll hear a confirmation beep distance calls If the number Pa a
19. aximum power allowed by the Federal Communications Commission FCC Even so this handset and base can communicate over only a certain distance which can vary with the locations of the base and handset the weather and the construction of your home or office If you receive a call while you are out of range the handset might not ring or if it does ring the call might not connect when you press TALK FLASH Move closer to the base then press TALK FLASH to answer the call If you move out of range during a phone conversation you might hear noise or interference To improve reception move closer to the base If you move out of range without pressing OFF your phone will be left off the hook To hang up properly walk back into range periodically pressing OFF www vtechphones com Telephone operation Voice mail Your phone is designed to work with most local and regional telephone service provider s voice messaging systems providing alerts on both the handset and telephone base when new messages come in Voice messaging is a subscription service available through most service providers for a fee Contact your local telephone company for more information When a caller leaves a message in your voice mailbox the VOICEMAIL light on the telephone base will flash In addition the handset will display Ea PM Clear voice mail alert If after you review your message s your message waiting alert does not go off you ma
20. cause during a interference Try moving the appliance or telephone base to another outlet telephone Other electronic products can cause interference to your cordless telephone Try installing your conversation telephone as far away as possible from the following electronic devices wireless routers radios radio towers pager towers cellular telephones digital telephones intercoms room monitors televisions VCRs personal computers kitchen appliances and other cordless telephones My calls fade out Microwave ovens operate on the same frequency as your telephone It is normal to experience static or cut in and out on your telephone while the microwave oven is operating Do not install this telephone in the same when am using outlet or near a microwave oven the cordless If your telephone is plugged in with a modem or a surge protector plug the telephone or modem surge handset protector into a different location If this solves the problem re locate your telephone or modem farther apart from each other or use a different surge protector The layout of your home or office might be limiting the operating range Try moving the base to another location preferably a higher location for better reception Disconnect the telephone base from the modular jack and plug in a corded telephone If calls are still not clear the problem is probably in the wiring or local service Contact your local service company charges may apply Select channels four t
21. ce Put the battery into the compartment b Place the battery in the compartment with the wires tucked inside c Replace cover by sliding it up into place d The battery may have enough power for some calls For best performance put the handset in the telephone base and charge the battery for at least 16 hours away from heat sources and sunlight 5 Avoid excessive moisture dust or extreme cold www vtechphones com 3 Installation Wall mounting bracket installation optional Your telephone base comes with the wall mounting desktop bracket installed ready for desktop use If you prefer to mount your telephone on the wall optional it is designed to mount on a standard telephone wall plate For wall mounting follow these instructions e First insert the lower portion tabs of the wall mounting desktop bracket into the lower grooves in the telephone base then snap the upper portion tabs of the bracket into place e Mount the telephone base on the wall by positioning it so the mounting studs will fit into the holes on the telephone base and wall mounting desktop bracket Slide the telephone base down on the mounting studs until it locks into place e To remove the bracket press both upper portion tabs firmly inward and pull the bracket downward until it release from the grooves upper portion tab Ie upper grooves Desk table bracket installation To place your telephone base on a desk or table insert the
22. cility Opening or removing parts of the base or handset other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions When the power supply cord or plug is damaged or frayed B If liquid has been spilled onto the product C If the product has been exposed to rain or water D If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation E If the product has been dropped and the base and or handset has been damaged F If the product exhibits a distinct change in performance r Avoid using a telephone other than cordless during an electrical storm There is a remote risk of electric shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Only put the handset of your telephone next to your ear when it is in normal talk This power unit is intended to be correctly orientated in a vertical or floor mount
23. ctrical outlet Connect the telephone line cord to the wall jack This power unit is intended to be correctly orientated in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under the table cabinet outlet Installation Connect power and telephone line cords Modular telephone jack www vtechphones com Standard electrical outlet Installation Choose location For maximum performance of your Install handset battery Q m gt ke N m o D Q cordless telephone system j p e Use only the 1 Choose a central location for 2 provided VTech your telephone base battery or 2 Install your telephone base and eee handset away from electronic replacement equipment such as personal batteries computers television sets and visit I on the microwave ovens web at www 3 In locations where there are E p 3 an multiple cordless telephones S 5 at 1 800 595 separate telephone bases as ee 9511 In Canada much as possible go to www 4 Install yourtelephone equipment a Align the two holes in the plug with the socket pins in the vtechcanada com or call us at handset battery compartment matching the red and black 1 800 267 7377 wires to the color coded label Snap the plug into pla
24. devices allowed to be connected to a telephone interface The termina tion on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five The RBRC seal The RBRC Seal on the nickel cadmium battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used nickel cadmium batteries into the trash or municipal waste which may be illegal in your area VTech s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERY for information on Ni Cd battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RBRC is a registered trademark of Rechargeable Battery Recycling Corporation 42 www vtechphones com Technical specifications Enhanced 5 8GHz technology your phone operates on a dual band transmission that combines the best of 5 8GHz and 900MHz technologies providing enhanced performance over standard cordless telephones Frequency con
25. displayed number displayed is not Locate the record in call history that you want to dial in the correct iM Although the call log entries you receive are 10 digits the area plus the 7 digit number in some format press areas you may need to dial only the seven digits or a 1 plus the seven digits or a 1 plus the area repeatedly to code plus the seven digits You can change the number of digits that you dial or store from the call see the different dialing options log While reviewing the call log press repeatedly to display these dialing options for local and You can choose long distance numbers before dialing or saving the telephone number See an example below to dial with or without the area code and with or without the 1 3 Press SELECT Press wor a until DIAL flashes 4 Press SELECT The number is automatically dialed OR When the number is correctly displayed for dialing press TALK FLASH Store a call history record in the directory 1 Locate the record in the call history you want to store in the directory 26 www vtechphones com Caller ID 2 You can change the number of digits that you dial or store fromthe call log While reviewing the call log press repeatedly to display these dialing options for local and long distance numbers before dialing or saving the telephone number See the side column and illustration on the previous page for more information on changing the dialing format
26. hrough 10 for your router refer to the user s manual of your router for more information If you still have problems with the telephone or the router make sure the handset is on and press CHAN until the performance improves Press the CHAN button while on a call until the interference has been eliminated If the other telephones in your home are having the same problem the problem is in the wiring or local service Contact the local telephone company charges may apply www vtechphones com uonewoy u EUO IPPY Troubleshooting Problem My caller ID features are not working properly The system does not receive caller ID or the system does not display caller ID during call waiting Caller ID entries do not match the numbers I need to dial 36 Suggestion Do you have DSL service If yes you need to have a DSL filter installed at every telephone jack that has a telephone connected to it Contact your DSL service provider for filter information Caller ID is a subscription service You must subscribe to this service from your local telephone company for this feature to work on your telephone The caller may not be calling from an area which supports caller ID Both you and the caller s telephone companies must use equipment which are compatible with caller ID service Ifyou subscribe to DSL service install a noise filter to the telephone line between the telephone base and the telephone line jack Contact
27. ial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase www vtechphones com 39 gt Q Z e gt o 5 3 o e gt Important safety instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following OF OE BOON ee 10 Lin 12 13 14 15 16 40 Read and understand all instructions Follow all warnings and instruct
28. il indicator If you subscribe to telephone company voice mail with a visual message waiting signal this light flashes NEW VOICEMAIL and an icon will also display on the handset screen when you have voice mail waiting FIND HANDSET Press to page the handset Press again press OFF on handset or place handset in the telephone base to cancel the page www vtechphones com 11 Ww o o i e me o e e If you have any trouble installing your phone please visit our website at www vtechphones com In Canada go to www vtechcanada com In the event the battery loses all power or if the battery is removed the time setting will be lost 12 Telephone operation Set language e Press PROG then press wor until LANGUAGE is displayed Press SELECT e The current setting blinks Press Y or A until the screen displays the correct language English Espanol Francais e Press SELECT to save your selection Set dial mode If you have touch tone service the phone is ready to use as soon as the battery is charged If you have pulse rotary service you ll need to change the dial mode e Press PROG Press wor A until the screen displays DIAL MODE and the current setting Press SELECT The current setting blinks Press wor A to select TONE or PULSE Press SELECT to save Set handset date and time If you subscribe to caller ID service the date and time will be set automatica
29. ions marked on the product Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water for example near a bath tub kitchen sink or swimming pool Do not place this product on an unstable surface such as a table shelf or stand The product may fall causing serious damage Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a soft surface such as a bed sofa or rug This product should never be placed near or over a radiator or heat register This product should not be placed in any area where proper ventilation is not provided This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your home consult your dealer or local power company Do not allow anything to rest on the power cord Do not install this product where the cord may have anyone walking on it Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product To reduce the risk of electric shock do not disassemble this product but take it to an authorized service fa
30. lly with the first incoming call If you do not have caller ID service you can set the date and time manually e Press PROG then press wor auntil DATE TIME is displayed Press SELECT e The month is flashing Press wor A until the screen displays the correct month Press SELECT The day is flashing Press Y or A until the screen displays the correct day Press SELECT The hour is flashing Press w or auntil the screen displays the correct hour Press SELECT The minute is flashing Press wor until the screen displays the correct minute Press SELECT AM or PM is flashing Press wor a to choose between AM or PM Press SELECT Check for dial tone After the batteries are charged pick up the handset and press TALK FLASH you should hear a dial www vtechphones com Telephone operation tone If you do not refer to the Troubleshooting section in the back of this user s manual Charge the handset battery The battery may have enough power to allow for short calls If the battery power is low NEEDS RECHARGING will appear on the handset screen For best performance charge the battery for at least 16 hours the first time Handset ringer style battery save You can select from four different handset ringer styles or turn the ringer off and extend the battery life 1 With the handset in idle off mode press PROG 2 Press y or A until the screen displays RINGER and the current setting 3 Press SELECT The current setting blinks yo
31. mation beep A memory location number 1 through 9 will be displayed with this entry Dial a directory number 1 Press A The screen displays DIRECTORY 2 Press wor ato scroll alphabetically through entries stored in directory OR Press the dial pad key for the first letter of the entry you want to dial 3 When the screen displays the entry you want to dial press TALK FLASH www vtechphones com Speed dial Your phone can store up to nine telephone numbers with names up to 15 characters and 24 digits in each location into the speed dial memory locations you assign 1 through 9 You can also store telephone numbers with names alphabetically in the directory See Telephone directory for instructions Store a speed dial entry 1 Press PROG on the handset 2 Press wor auntil the screen displays SPEED DIAL 3 Press SELECT The screen displays ENTER 1 9 4 Press the key 1 through 9 for the memory location where you want to store this entry The screen displays ENTER NAME 5 Using the chart below enter up to 15 characters for the name you re storing with the number An error tone will sound if you try to enter more than 15 characters Press W then press CHAN REMOVE to backspace and make corrections press A to advance or press it twice to add a space Presses Dial key Once Twice 3 times 4 times 5 times 6 times 1 1 2 A B c 2 3 D E F 3 4 G H l 4 5 J K 5 6 M N 0
32. mited warranty to you transportation delivery or handling charges prepaid VTech assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty and 2 Include valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other Limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provinc
33. ng and removing the battery from the handset Wait for 15 seconds then plug in the battery and plug in the power Allow up to one minute for the cordless handset and the telephone base to synchronize Other electronic products can cause interference to your cordless telephone Try installing your telephone as far away from these electronic devices as possible wireless routers radios radio towers pager towers cellular telephones intercoms room monitors televisions personal computers kitchen appliances and other cordless telephones If the unit is not responding normally try putting the cordless handset in the telephone base If it does not seem to respond try the following in the order listed Disconnect the power to the telephone base Disconnect the battery on the cordless handset and the spare battery in the telephone base Wait a few minutes before connecting power to the telephone base Re install the battery and place the cordless handset into the telephone base or charger Wait for the cordless handset to synchronize its connection with the telephone base Allow up to one minute for this to take place www vtechphones com uonewoy u EUO IIPPY Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the handset down gently Save the original packing materials to protect your telephone if you ever need to
34. nine speed dial entries telephone numbers with names up to 15 characters for the name and 24 digits for the number in each location in the handset Store a directory entry 1 Press PROG The screen displays DIRECTORY 2 Press SELECT The screen displays ENTER NAME 3 Using the chart below enter up to 15 characters for the name you re storing with the number Press Y then press CHAN REMOVE to backspace and make corrections press A to advance or press it twice to add a space Presses Dial key Once Twice 3 times 4 times 5 times 6 times 1 1 2 A B c 2 3 D E F 3 4 G H 4 5 J K L 5 6 M N fe 6 i P Q R S 7 8 T U v 8 fe w x Y z 9 0 o Fe amp 4 When you finish entering the name press SELECT or PROG The screen displays ENTER NUMBER www vtechphones com e Press OFF at any time to exit the directory e When the memory is full the screen will display MEMORY FULL an error tone sounds and you will not be able to store a new number until you delete a stored number to make room for another entry e Ifthe directory is empty and you try to access the directory DIRECTORY EMPTY will show on the screen e When you reach the end of the list in the directory END OF LIST will be shown on the screen 17 Ww o 2 2 e TS o fe e When you are using the dial pad key s to search for a n
35. p directory V CID caller ID VOL e While on a call press to decrease the volume A double beep will sound when you reach the lowest setting www vtechphones com Ww o o i e xe p o e 10 Telephone operation e While phone is not in use press to display caller ID information e While entering names or numbers into memory press then press CHAN REMOVE to delete the last character entered 4 VOL amp directory e While on a call press to increase the volume A double beep will sound when you reach the highest setting e While phone is not in use press to display directory entries e While entering names press twice to add a space SELECT e Press to confirm an entry of operation or to select highlighted item from menu OFF e During a call press to hang up While in a menu press to cancel an operation or exit the menu REDIAL PAUSE e Press to view redial number Press again to delete the redial number Press to insert a dialing pause while entering a number PROG program e With the handset in idle on hook press to enter programming mode Volume e During a call press yor A to adjust the listening volume to a comfortable level www vtechphones com Telephone operation Telephone base operation CHARGE IN USE e Flashes slowly when the handset is in use e Glows steadily when the handset is charging in its base e Flashes in unison with an incoming call Voice ma
36. r to the Warranty section on pages 38 to 39 of this user s manual for further instruction www vtechphones com Troubleshooting Problem Suggestion The CHARGE IN This is a signal that the battery is very low completely depleted or when there is no electrical USE Indicator on the contact between the battery and the telephone base telephone base is Ensure the connector of the battery is securely plugged into the handset and place the handset in flashing the telephone base for charging There is no dial tone First try all the above suggestions Move the cordless handset closer to the telephone base It might be out of range The telephone line cord might be malfunctioning Try installing a new telephone line cord Disconnect the telephone base from the telephone jack and connect a different telephone If there is no dial tone on the telephone either the problem is in your wiring or local service Contact your local telephone company www vtechphones com gt Q Z e gt oi 5 h e o e gt Troubleshooting Problem The telephone does not ring when there is an incoming call 32 Suggestion Make sure the ringer is on See page 13 Make sure the telephone line cord and power adapter are plugged in properly see page 2 The cordless handset may be too far from the telephone base Move it closer to the telephone base There may be too many extension phones on the telephone line to
37. seessoees Move a directory entry to the speed dial i Dial a directory NUMDET ccceseseesseeeseeeseeeseesesees Speed dial oo ee eeeeceeseeseceeeeeeeeeeseeseeeeeeeeeeeeseeeeeeeeseaees Store a speed dial entry ase Edit a speed dial entry cc scsesseseesseeseseeeseeeseessoees Erase a speed dial entry Dial a speed dial number T Reassign locations in speed dial ee CAM Oi Detect set2scaatt a e estes teeh satay About call history caller ID 2x Review call NIStOry cs sscsseseesestesseseseeeeseesseeseoees Delete records from call history 0 00 Delete a specific call s Delete all Calls 2es cscerscuaiecdsttshisatenssusccteatdsbsscecaccasaezens Dial a displayed NUMDET cccecessersesseeeseeeseesseees Store a call history record in the directory jia Display screen MESSAGES ceseecesseesesreeeseeseteesees Battery information ccccccseeeeeeeeeeeeeeeeeeeeeteeeeeeseaeees Troubleshooting T MaintenaNC orssed EREE Limited Watramty sedre centtetissceddstasuceassesacqenilehascessasesienass Important safety instructions isal FCC ACTA and IC regulations cceeeeeeeeeeeeeeeee www vtechphones com Table of contents ii www vtechphones com Important Before using this telephone please read the Important safety instructions on page 40 of this manual NEED HELP This manual has all the feature operations and troubleshooting yo
38. ship it Avoid water Your telephone can be damaged if it gets wet Do not use the handset outdoors in the rain or handle it with wet hands Do not install your telephone base near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety use caution when using electric appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or a mild soap Do not use excess water or clean ing solvents of any kind Limited Warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or
39. stions below should solve the problem If you still have difficulty after trying these suggestions call VTech Communications at 1 800 595 9511 In Canada call VTech Telecommunications Canada Ltd at 1 800 267 7377 Problem Suggestion My telephone does not Make sure the battery is installed and charged correctly see page 3 and 28 For optimum work at all daily performance return the cordless handset to the telephone base after use Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch Make sure the telephone line cord is plugged firmly into the telephone base and the modular wall jack Unplug the unit s electrical power and remove the battery from the handset Wait for 15 seconds then plug in the battery and plug in the power Allow up to one minute for the cordless handset and base to synchronize Charge the battery in the cordless handset for at least 16 hours Remove and re insert the battery If that still does not work it may be necessary to purchase a new battery pack Disconnect the telephone base from the modular jack and plug in a working telephone If this telephone does not work the problem is probably in the wiring or the local service Call the local telephone company BATTERY LOW is Place the handset in the telephone base for recharging displayed on screen Remove and re install the battery and use it normally until fully discharged then recharge the handset on the telephone base for
40. there is a dial tone before dialing It is normal if the cordless handset takes a second or two to synchronize with the telephone before producing a dial tone Wait an extra second before dialing Make sure the telephone is set to the correct dial mode pulse dial or tone dial for the service in your area Refer to the Set dial mode section of this user s manual page 12 to set the dial mode If the other telephones in your home are having the same problem the problem is in the wiring or local service Contact your local telephone company charges may apply Eliminate any background noise Noise from a television radio or other appliances may cause the telephone to not dial out properly If you cannot eliminate the background noise first try muting the cordless handset before dialing or dialing from another room in your home with less background noise Disconnect the telephone base from the telephone jack Plug in a different telephone If you still hear other calls the problem is probably in the wiring or local service Call your local telephone company Press the CHAN key to switch to a clear channel when on a call Make sure the telephone line cord is plugged in securely www vtechphones com Troubleshooting Problem Suggestion There is noise The handset may be out of range Move it closer to the telephone base or interference Appliances or other cordless telephones plugged into the same circuit as the telephone base can
41. this user s manual 28 Battery information Battery care and maintenance After your battery is fully charged you can expect the following performance Operation Operating time While not in use standby up to 7 days Handset is off the telephone base but not in use The battery needs charging when Anew battery is installed in the handset The phone beeps twice every five seconds The screen displays BATTERY LOW and the low battery icon Place the handset in the base so the charge light turns on The battery is typically fully charged in 16 hours You can keep the battery fully charged by returning the handset to the base after each use Replace the handset battery Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward Lift out the old battery and disconnect Align the two holes in the new battery s plug with the socket pins and snap the plug into place Snap the battery in the compartment as described in Installation on page 3 4 Replace the cover by sliding it up into place 5 The new battery must be charged before using the phone Place the handset in the base and allow it to charge for at least 16 hours the first charge The telephone might operate before that but for best performance let the battery charge fully on www vtechphones com Troubleshooting If you have difficulty operating your phone the sugge
42. tive ring setting Press SELECT to save the edited information www vtechphones com Directory Erase a directory entry q 2 Press A The screen displays DIRECTORY Press wor ato scroll alphabetically through entries stored in directory OR Press the dial pad key for the first letter of the entry you want to delete When the screen displays the entry you want to delete press SELECT Then press yw or 4 until ERASE flashes ERASE Press SELECT The screen displays ERASE NO YES and the number The current choice flashes Press A until YES flashes Press SELECT You ll hear a confirmation beep Move a directory entry to the speed dial 1 2 Press A The screen displays DIRECTORY Press wor ato scroll alphabetically through entries stored in directory OR Press the dial pad key for the first letter of the entry you want to move When the screen displays the entry you want to move press SELECT Then press Wor a until SPEED flashes www vtechphones com e When memory is full the screen displays MEMORY FULL an error tone sounds and you cannot store a new number until you delete a record in speed dial memory or the directory 19 Ww o o i e xe p o e 20 Directory 4 Press SELECT The screen displays ENTER 1 9 5 Press the key 1 9 for the memory location where you want to store this entry You ll hear a confir
43. trol Crystal controlled PLL synthesizer Transmit frequency Base 912 75 917 10 MHz Handset 5863 80 5872 5 MHz Receive frequency Base 5863 80 5872 5 MHz Handset 912 75 917 10 MHz Channels 30 Nominal effective range Maximum power allowed by FCC and IC Actual operating range may vary according to environmental conditions at the time of use Size Handset 184mm X 52mm X 41mm Base 143 614mm X 108mm X 103 26mm with wall mount Weight Handset 130 grams Base 219 8 grams with wall mount Power requirements Handset 400mAH Ni Cd Battery Base 9V AC 250mA Memory Nine speed dial locations up to 24 digits 15 characters per location Directory 20 memory locations including the nine speed dial entries up to 24 digits 15 characters per location Caller ID 45 memory locations www vtechphones com gt Q Z T e a 5 e o e gt Index A About call history caller ID 25 Answering calls 9 B Batteries 28 Belt clip 6 Cc Caller ID 24 27 Charge the handset battery 13 Check for dial tone 12 Choose location 3 Clear voice mail alert 15 Connect power and telephone line cords 2 D Delete all calls 26 Delete a specific call 26 Delete records from call history 26 Desk table bracket installation 4 Dial a directory number 20 Dial a displayed number 26 Dial a speed dial number 23 Directory 17 20 Display screen messages 16 27 E Edit a directory entry 18 Edit a speed dial entry 22
44. tructions in the user s manual The Ringer Equivalence Number REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called The REN for this product is encoded as the 6th and 7th characters following the US in the product identifier e g if is 03 the REN is 0 3 In most but not all areas the sum of all RENs should be five 5 0 or less For more information please contact your local telephone company This equipment may not be used with Party Lines If you have specially wired alarm dialing equipment connected to your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer If this equipment is malfunctioning it must be unplugged from the modular jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the Limited Warranty If this equipment is causing harm to the telephone network the telephone company may temporarily discontinue your telephone service The telephone company is required to notify you before inter rupting service If advance notice is not practical you will be notified as soon as possible You will be given the opportunity to correct the problem and the telephone
45. u need to install and operate your new VTech telephone Please take the time to review thoroughly to ensure proper installation of this VTech innovative and feature rich product You can also visit our website at www vtechphones com for support shopping and everything new at VTech In Canada please visit www vtechcanada com Parts checklist Your phone should include the following e Handset e Telephone base e Desk wall mount bracket e Base power adapter e Battery e Battery cover e Belt clip e Telephone line cord e Users manual To purchase replacement batteries visit us on the web at www vtechphones com or call us at 1 800 595 9511 In Canada go to www vtechcanada com or call us at 1 800 267 7377 208 BG Log Handset tech Battery covers Base power adapter Telephone base Battery with desk wall mount bracket Belt clip Telephone line cord User s manual www vtechphones com e Important Before using this telephone please read the Important safety instructions on page 40 0 gt Co 7 mA o mi a Install the telephone base away from electronic equipment such as personal computers television sets or microwave ovens Avoid excessive heat cold dust or moisture Connect the power and telephone line cords to the underside of the base as illustrated Plug the AC adapter into an ele
46. u will hear a sample of the ring 4 Press w or A to select RINGER 1 2 3 4 or OFF You will hear a sample of each ring tone 5 Press SELECT to confirm the displayed ringer setting Ringer volume You can select from two different handset ringer volume or turn the ringer off Begin with the handset in idle off mode Press and hold Y or A until the screen displays OFF LOW HIGH The current setting blinks and you will hear a sample of the ring volume Press 9 or A to select ringer volume OFF LOW HIGH You will hear a sample of each ring tone Press SELECT to confirm the displayed ringer setting Ww o o i e xe p o e akon www vtechphones com 13 e Temporary tone dial mode is useful if you need to send touch tone signals for access to telephone banking or long distance services e For clearer reception while on a call press the CHAN button until the interference is eliminated 14 Telephone operation Temporary tone dialing If you have pulse rotary dialing you can change from dial pulse to touch tone dialing during a call by pressing TONE This is useful if you need to send touch tone signals for access to telephone banking or long distance services 1 Press TALK FLASH 2 Press TONE 3 Dial the number 3 When you end the call by pressing OFF the phone automatically returns to pulse dialing Operating range This cordless telephone operates within the m
47. ve of VTech or Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or Product to the extent that the problem is caused by use with non VTech accessories or Product whose warranty quality stickers Product serial numbers plates or electronic serial numbers have been removed altered or rendered illegible or Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without valid proof of purchase see item 2 below or OA Pan 38 www vtechphones com Limited Warranty 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the United States of America please call 1 800 595 9511 In Canada please dial 1 800 267 7377 NOTE Before calling for service please review the user s manual a check of the Product controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this li
48. y manually turn it off by 1 Press PROG 2 Press yora until screen displays CLR VOICEMAIL 3 Press SELECT the screen displays 4 Press yora to select YES or NO 5 Press SELECT to confirm www vtechphones com e Turning off the voice mail indicator only turns off the displayed NEW VOICEMAIL message on the handset screen it does not delete your voice mail message s Use this feature when the phone indicates there is voice mail when you have none or you have accessed your voice mail from a remote location other than your home If there actually is a new voice mail message your local telephone company will continue to send the message which turns the displayed NEW VOICEMAIL message 15 W o o i e gej p o fe 16 Telephone operation Display screen messages Screen displays When There is a call coming in The handset is waiting for dial tone The handset is in use You have been alerted by the telephone company that you have received new voice mail The telephone base is paging the handset The battery needs to be recharged The handset is changing to another of the 30 channels available 1 Displays when base power is off and TALK FLASH is pressed You ll hear five rapid beeps 2 Displays when an out of range dial fails to connect The handset ringer is turned off www vtechphones com Directory Your phone can store 20 including the
49. your DSL service provider for filter information Make sure you subscribe to Caller ID with Call Waiting features services provided by the local telephone company The caller may not be calling from an area which supports caller ID Both you and the caller s telephone companies must use equipment which are compatible with caller ID service Ifyou subscribe to DSL service install a noise filter to the telephone line between the telephone base and the telephone line jack Contact your DSL service provider for filter information Although the call log entries you receive are 10 digits the area plus the 7 digit number in some areas you may need to dial only the seven digits or a 1 plus the seven digits or a 1 plus the area code plus the seven digits You can change the number of digits that you dial or store from the call log While reviewing the call log press repeatedly to display these dialing options for local and long distance numbers before dialing or saving the telephone number www vtechphones com Troubleshooting Problem My cordless handset beeps five times and is not performing normally Common cure for electronic equipment Suggestion Make sure the power cord is securely plugged into the telephone base Plug the unit into a different working electrical outlet not controlled by a wall switch Move the cordless handset closer to the telephone base It may be out of range Reset the telephone base by unpluggi
Download Pdf Manuals
Related Search