IBQ2006 User Manual
Contents
1. powers up in its last setup configuration Resetting the Frequency Counter If you want to reset the Frequency Counter to the factory settings Turn off the Frequency Counter Q Press the J key and the key simultaneously Release the key firstly and then the t key Open LCD backlight Pressing the key can switch LCD back light on and off in measuring screen Hold the Measuring Result Press the key to hold or release the measuring result Hold will be displayed on bottom left of the LCD when holding Screen manifestation contents showed as following SAVE AUTO HOLD FILTER Battery Indicator GATE J 6 4S A mm Frequency Display 100 00000m HOLD Indictor RF Singnal Indictor lt N Enter the options menu Press the Ey for 2 seconds to enter the main menu Exit the menu Press the z key for 2 second to exit the current menu level Operating the menu http featuretech co nz Ham Accessories FUE TELAT OPTIONS MENU RANGE GATE UERS In the menu the key stands for the upward direction the HOLD key stands for the downward direction Press the t key to enter the subordinate catalogue Setup the Range IBQ2006 ST Only Press the t key options menu Select the Option of RANGE RANGE E 1MHz 2 6GHz 500hm INPUT O 10Hz 50MHz 1M Ohm INPUT Press the key or the key to pick up press the T key to confi2. FEPIT EMRE TELAT Pocket Frequency Counter IBQ2006 ST H User Manual Characteristics Large screen display 9 digits LCD Display Low power consumption It can be use 4 hours with the inside lithium battery RF signal strength bar chart Screen locking function Storage function Low power consumption Specification Input Sensitivity Typical Model IBQ2006ST IBQ2006H Amplifier 1M ohm 50 ohm 50 ohm Impedance 1M ohm 30pF 50 ohm VSWR lt 2 1 50 ohm VSWR lt 2 1 Range 10Hz 50MHz 1MHz 2 6GHz 1MHz 2 6GHz Sensitivity lt 18mV 10Hz 30MHz lt 3mV 100MHz lt 3mV 100MHz lt 25mV 30MHz 50MHz_ lt 3mV 400MHz lt 3mV 400MHz lt 10mV 1GHz lt 10mV 1GHz Maximum Input 50 Vrms 15dBm 15dBm Frequency Display Resolution Range Gate Time LSD Sample Display 50MHz 1S 1 Hz 50000000 H IBQ2006ST only 0 1S 10 Hz 50000 00 K 0 01 S 100 Hz 50000 0 K 10S 0 1Hz 50000000 0 H 2 6GHz 0 64 S 100Hz 2400 0000 M 0 064 S 1000Hz 2400 000 M 0 64 mS 100KHz 2400 0 M 6 4S 10Hz 2400 00000 M Cabinet PVC Display Dot matrix LCD Battery Internal 600mAh Lithium ion battery pack Time base lt 1PPM TCXO at IBQ2006ST lt 10PPM IBQ2006H Power 5VDC1A http featuretech co nz Ham Accessories FEPITLLRE TELAT __ Using The frequency Counter Powering Frequency Counter Turn on the Frequency Counter by pressing the key The Frequency Counter
3. rm the operation and go back to OPTIONS MENU and press more than 2 seconds to exit OPTIONS MENU The select of Gate Time In OPTIONS MENU choose GATE The 1MHz 2 6GHz of Range set up above is showed as following GATE E 0 64S Oo 0 064S O 0 00064S Oo 6 4S The 10Hz S5OMHz of Range is GATE a 1S m 0 1S m 0 01S m 10S http featuretech co nz Ham Accessories FEPI TLE TELAT Press the key or the key to pick up the desired gate time press the e key to confirm the operation and go back to OPTIONS MENU and press more than 2 seconds to exit OPTIONS MENU Saving Screens Pick up USER in OPTION MENU USER SAVE HOLD VIEW FILTER AUTO OFF Pick up SAVE from USER SAVE E AUTO O MANUAL If selecting AUTO function the measuring result will be automatically locked and stored If selecting MANUAL function the key should be pressed in order to store the measuring results Storage machine can save up to 100 measuring results Once the 101 result is stored the 1 result will be eliminated automatically Freezing the Screen Setups Pick up HOLD from USER HOLD E AUTO O MANUAL In selecting AUTO function if the signal strength is over 50 the measuring result will be stored automatically Press the key to continue the operation In
4. selecting MANUAL function press the key to keep the measuring results and Press the key again to restart the operation http featuretech co nz Ham Accessories FEPITLMIRE TELAT Viewing Stored Screens Pick up VIEW from USER VIEW 100 00000m M01 Press the key or the key to look through the stored measuring results The filter function setup Pick up FILTER from USER FILT E ON O OFF In selecting ON state the input signal will be filtered before measuring Auto off function setup Pick up AUTO OFP from USER AUTO OFF E ON O OFF In selecting AUTO OFF function if there is no operation for 5 minutes the frequency counter will be shut down automatically Note If the power adapter is connected the AUTO OFF function will be disabled Signal Input When using the frequency counter with an antenna for signal collection even if there is no signal random counts may appear This phenomenon is normal due to the 20 dB high gain amplifier Do not exceed maximum signal input level http featuretech co nz Ham Accessories
Download Pdf Manuals
Related Search