AVE user manual - HillTop-tw
Contents
1. 9 7 Mount Dismount the Trailer only for MO2 8 of the vehicle mode To launch this setting tires should be matched with two different standard pressure values first Press and hold f set a lnd Func for 9 seconds and the message area will display TOW The trailer part will flash 1 Press NO to dismount the trailer The unit will beep once when dismounted 2 Press 14 YES to keep the trailer The unit will beep once when done 20 seconds of inactivity or finishing the trailer mounting dismounting will get the unit back to the operating mode 15 www avetechnology com AVE HARRI ARAT 9 8 TIRE SETUP MODE To change rotate tires Press and hold and buttons together for 3 seconds to enter TIRE SETUP MODE In this mode message area will display CHG Press YES to change tire position and change tire position function Pressing NO will not change the tire position and will goes to setting up sensor position There are 2 patterns 1 Front Wheels and Rear Wheels 2 Front Right and Rear Left 1 Press to change patterns 2 Press to confirm Message area will display OK Pressing f set a YES will display OK and then goes back to operating mode while pressing NO will display IDX and then goes back to operating mode If no any activity for 20 seconds it will automatically goes to setting up sensor position Note TIRE SETUP MODE is only for MO1 Vehicle mode pleas2. 3V 2 66kPa Car 5 5kPa Truck Receiver Specifications Operating Voltage 9V to 18V Operating Temperature 20 C to 85 C Monitored Temperature 40 C to100 C 4 www avetechnology com AVE HE PE LIQ AR fo BBR ZS ol Advanced Veh cle Electronic Technology Co td 5 AVE TPMS Components Display Unit 1 B _iTireSensors 4 D Commonmetaivave 4 E Airconditionercip 2 F it Q H ITEM Quantity 2 User manual 1 Base Adhesive Remote Control Optional 3 www avetechnology com AVE HE PE LIQ AR fo BES ol Advanced Veh cle Electronit Technology Co td 6 System Setup Connect the Mini USB End of the Power Adaptor to the display unit Attach the antenna by gently screwing it on clockwise finger tight Install the display unit into the desired location Install the air vent clips for vent mounting Apply the enclosed double sided adhesive cushion to the base of the Display Unit for dashboard mounting ee Plug in the Cigarette Adapter to vehicles cigarette lighter socket Note It must be a 12 V power supply For OE original equipped power cable connect different wires according to the label Connect Ground IGN BATTERY 12V while ANTENNA wire does not need to be connected Please refer to the appendix chart p 25 AVE TPMS display unit setup is now complete Please start the engine or turn the key to IGN position AVE TPMS display unit will start receivi
3. Installation and Operating Instructions Advanced Vehicle Electronic Technologies Co Ltd FCC ID VMUAVE TPMS T100 Advanced Vehicle Electronic Technology Co Ltd Phone 886 07 3310885 B 2 23F 2 No 29 Haibian Road Lingya District Kaohsiung 802 Taiwan Fax 886 07 3311351 Website www avetechnology com E mail sales avetecnology com AVE E Re LQ AN fp BBR Oo Advanced Veh cle Electronic Technology Co td TABLE OF CONTENTS AVE Tire Pressure Monitoring System TPMS 000e 2 SP NOUCE porpre E E 2 s CUOR serres n E E EEEE EE E EEEE 3 Specifications Of AVE TPMS a eee ccececeeesceeneeeneeeeneeeneeeaes 4 AVE TPMS Components 2 cccecccccecceeeeeee eee eeeeeeeeeenaeenaeeaes 5 System Setup coset etic ieen cand ce eee cncces eorecaceuedeeccdae scescesedesneanes 6 Tire Sensors Installation cc cece eee eee seen seen eee eeeeneeenaeeeeeees 7 Display Unit Introduction clic cee ceee ese e nsec en eeeeneeeeeneeees 9 Operating AVE TPMS 9 1 Operating Mode _ ccc eecc cc ceee eee ee ence eee eeeeeeneaeeeenaaees 11 9 2 Function Mode To review every tire s condition quickly 11 9 3 Unit Mode To review every tire s condition quickly 12 9 4 Pressure setup mode To change vehicle mode amp pressure 13 9 5 Setup the 2 Standard Pressure ccsceeeeseeeeeeeeeeeens 15 9 6 Match Tires and the 1 or 2 Standard Pressure 15 9 7
4. s sensor e Tire sensor is available for the spare tire e To purchase more tire sensors please contact your AVE TPMS retailer 24 www avetechnology com AVE HARRI ARA 14 Appendix 12V sy Car Eatery AVE OE power cable installation Ground Battery tagged red line connect AVE OF to the Sonina skes me Power Cable Ground tagged black line connect to the negative pole 24 Volt Half Tap Wiring Diagram T Ground To 24 VDC Load To 12 VDC Load 1 Isolated 36 Volt Half Tap Wiring Diagram F Ground To 36 VDC Load gz 024 VDC Lona All Battery Loads Must Be Equal Isolate 12 Volt Load 1 Negative From Ground 25 www avetechnology com Isolated AVE Re SAD BBR ZS o Advanced Veh cle Electronic Technology Co td Pressure Conversion Table Temperature Conversion Table 26 www avetechnology com AVE SRI ARA Ol Advanced Veh cle Electronic Technology Co td 15 WARRANTY AVE Technology warrants to the original end user that the product purchased is free from defects in material and workmanship for a period of one 1 year from the date of original purchase Should the product fail within the warranty period it will be replaced or repaired at the option of AVE Technology AVE Technology reserves the right to replace defected products with either a new or refurbished unit to be functionally equivalent to new The Warranty is void and inapplic
5. C 176 F e Affected tire will flash during its turn when the unit is in operating mode e Unit will sound one long beep followed by a one second delay e Temperature icon will light e Temperature bar indicator will flash Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user TEMPERATURE ABOVE 90 C 194 F e Affected tire will flash during its turn when the unit is in operating mode e Unit will sound one long beep follow by one short beep and a one second delay e Temperature icon will light e Temperature bar indicator will flash Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user TEMPERATURE ABOVE 100 C 212 F e Affected tire will flash during its turn when the unit is in operating mode e Unit will sound one long beep followed by two short beeps and a one second delay e Temperature icon will light e Temperature bar indicator will flash Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user 20 www avetechnology com AVE E Be SQA BBR ZS ol Advanced Veh cle Electronis Technology Co td 10 LF Remote Control In order to simply the complicated procedure of resetting the sensor position by inflating de
6. antenna must not be co located or operating to conjunction with any other antenna or transmitter 2 www avetechnology com AVE E Be SQA i A RA ol Advanced Yeh cle Electroniz Technology Co td 3 CAUTION AVE s TPMS system is designed to monitor the tires condition and alert the user if there is any irregularity detected Use of chemical sealants for temporary resealing or re inflation in tire assembly may affect or even damage the sensors function For your own safety please read and understand the instruction manual before proceeding to the installation and setup Please seek qualified personnel for proper tire sensor installation Only use the power cord cigarette adapter supplied by AVE Technology Do not use AVE Technologies power cord in any other USB device It is NOT USB compatible and may damage your USB device AVE TECHNOLOGY shall not be held responsible for any damage caused to any USB device if you use this power adaptor in any other device When you unplug the power adaptor do not pull from the cord It may damage the adaptor lf the power cable is damaged in any way and is under warranty contact your dealer Never try to disassemble or repair the product yourself 3 www avetechnology com AVE fe SIREN ARA ol Advanced Veh cle Electronic Technology Co td 4 Specifications of AVE TPMS Sensors Transmitter Specifications Battery life Estimated 5 to 7 years under normal operating condition
7. default temperature unit 12 oe v FUNC www avetechnology com AVE E ENRI DARA Advanced Yeh cle Electronis Technology Co td 9 4 PRESSURE SETUP MODE To change vehicle mode amp pressure o 6 O TRUCK MODE 1 Press and hold button for 3 seconds to enter PRESSURE SETUP MODE 1 The message area will display M01 The default vehicle mode or the previously selected mode 2 Press to change vehicle mode M01 gt M02 M08 gt M01 Or press to keep the default or the previously selected vehicle mode Then the system will allow you to setup the 2 standard tire pressure Please refer to page 15 20 seconds or more of inactivity at this step will exit the setting and get back to the operation mode Change will not be launched 3 Press to confirm and save the selection of vehicle mode Immediately after this step the message area will display the default pressure Vehicle Mode Default pressure psi value Default pressure value depends on the M01 vehicle mode selection Follow step 4 to confirm or Ae aaa This step will erase the previously selected vehicle Mos mode and pressure Moreover the display will also lose every sensor s ID code Afterwards the leak test will be necessary to launch for reset the sensor ID 13 www avetechnology com AVE FARR ARA 1 DIGIT 2 DIGIT 3 DIGIT 4 Press to accept the default pressure value BEERE LLL SEGRE EERE
8. tire location doesn t save and the unit will beep once Then message area display OK e Press to delete this tire if there is no sensor installed or no tire existing in the position Deleted position will not be monitored by the system e Press f set a to skip the leak test on the tire The message area will display SKP The last default value will be kept 5 System will proceed to the next tire to set up Note If all tires are completely set up the system will exit TIRE SETUP MODE Inactivity of more than 240 seconds 4 minutes and the system will automatically return to the operating mode and save the last setting Optional to leak test User can avoid performing a leak test on the tire by using the Optional AVE TPMS sensor s LF remote control Kindly refer to the page 21 17 25e www avetechnology com AVE E BB ELI AR ARA ol Advanced Veh cle Electronit Technology Co td 9 10 Reacting to Alerts NO SIGNAL e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep once every second e Antenna signal Icon shows Y with no bars e Pressure and Temperature bar indicators will light e No numbers will be in the Pressure and Temperature display Note Interference will affect signal s reception Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user U
9. Mount Dismount the Trailer cccceeeeeeeeeeeeeeeeeeeeees 15 9 8 Tire setup mode To change rotate tires 008 16 9 9 Set UP sensor POSITION oo eee cece cece e eee eee ee eeeeenaeee 17 9 10 REACHING 10 Aleris cccccsscsecotesscorreswectencsceewsscecezcexdunssecess 18 10 LF Remote Control cccc cc ceceeeeeeenceeeeeeeeeeeeeneueeeeeeeaueeeeeass 21 11 Chart of Tire Setup Mode and Leak Test ccceeeeeee eee 22 12 AVE TPMS Extended Antenna Cable ccc cece cece eee 23 13 AVE TPMS Optional Accessories cccccceeeeeeeeeeeeeneeeenes 24 14 Appendixes seeps cease tiesto eteserecna eras REE een teeter dense es 25 TOs Wanamy acetate E cetdeccesceencat 27 l www avetechnology com AVE E Re LQ AN fp BBR Oo Advanced Veh cle Electronic Technology Co td 1 AVE Tire Pressure Monitoring System TPMS Thank you for purchasing AVE s Tire Pressure Monitoring System TPMS AVE s TPMS was designed to provide you with extra protection while driving Our TPMS informs you of tire pressure and tire temperature and immediately notifies you of any problems such as a slow or fast leak After proper installation AVE s TPMS will continually monitor your vehicles tire pressure and temperature with accurate and up to date information If the TPMS detects any irregularity in the tires pressure and or temperature it will immediately sound an alarm and flash on the LCD d
10. N 5 Press to change the pressure value TITT EDANE ETEMA EEREN 6 The pressure value on the far right digit will flash GRRE EEEGE E HEREN when entering the last digit e To change the pressure value press button The displayed number will increase by 1 every time button is pressed Continue to press the button until you see the value you want The number will loop from O to 9 and then back to 0 8 Press to accept the input value The message area will then proceed to the middle oan number The pressure value in the middle will flash 9 Repeat step 6 to 8 to set up 2 which is the pressure value on the far left 10 Press to accept the displayed value on the 3 digit oe Correctly Enter Pressure Note If the target pressure value is 28 psi please enter it as 028 psi Different unit if needed should be selected before setting up the pressure value Please refer to UNIT MODE on page 12 Once done the system will perform a check on the pressure entered This is to avoid improper pressure setup for selected vehicle mode 11 If the proper pressure has been entered a 3 Message area will display PS Pressure Saved Fr Display Unit will beep once Entered pressure value will be saved Return to the operating mode 12 If improper pressure has been entered e Message area will display ERR Pressure Error Error in pressure e Display Unit will beep twice e User will automatically be returned
11. NDER INFLATION 25 e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep once every two seconds e Pressure bar indicator will flash at 75 Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user The 25 under inflation value in pressure display is based on default or changed standard pressure UNDER INFLATION 30 e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep once every two seconds e Pressure bar indicator will flash at 70 e Tire leak icon will light Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user The 30 under inflation value in pressure display is based on default or changed standard pressure 18 www avetechnology com AVE HARRI ARA CAR BATTERY If the battery voltage falls below 11 5 volts or goes higher than 15 5 volts the Battery chart will flash and the unit will beep once every two seconds Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user OVER INFLATION 25 e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep once every two seconds e Pressure bar indicator will fl
12. The message area displays AP 2 Psi icon will light the default pressure unit or the previously selected unit 3 Press to change pressure unit psi gt kpa gt bar gt psi Note If Truck pressure is above 999 kpa you can only select psi or bar Unit 4 Continue to press for pressure unit selection 5 Press to confirm the selection Pressure unit is then saved Note To bypass pressure unit change skip step 3 amp 4 Go to step 5 to confirm the default unit settings The default pressure unit is in psi or previously selected unit of measure To exit Unit Mode do not touch any buttons for 20 seconds Changes will not be saved before step 5 and the system will use the default pressure unit 6 Immediately after step 5 message area will display AT 7 C icon will light default temperature unit or previously selected unit 8 Press to change temperature unit C gt F gt C 9 Continue to press for temperature unit selection 10 Press to confirm the selection Temperature unit is then saved 11 UNIT MODE setup is now complete System will automatically return to OPERATING MODE Note To bypass temperature unit change skip step 8 amp 9 Go to step 10 to confirm the default unit settings Default temperature unit is in Celsius or previously selected unit To exit do not touch any buttons for 20 seconds Changes will not be saved before step 10 and the system will use the
13. able if 1 the product has been used or handled other than accordance with the instructions in the user manual 2 the product is abused misused damaged by accident or neglect 3 the damage is due from being repaired or tampered with by anyone other than an AVE Technology or an authorized AVE Technology repair center 4 the damage is due from shipping during transit The damaged product must be delivered prepaid to AVE Technology or its authorized AVE Technology repair center The RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT AND A PHOTOCOPY OF THE ORIGINAL PURCHASE RECEIPT This warranty is valid in the country of purchase This warranty is limited to the terms stated herein AVE Technology shall not be liable for any special incidental or consequential damages relating to the product sold This Warranty gives you specific legal rights and you may also have other rights which vary from state to state WARRANTY REGISTRATION FORM Last Name First Name Apartment House Number Number Street Name City State Province Country Zip Postal Phone Product Model Warranty Purchase Date feye avers J CU OL YEAR 27 www avetechnology com
14. ash at 75 Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user The 25 over inflation value in pressure display is based on default or changed standard pressure OVER INFLATION 30 e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep twice every two seconds e Pressure bar indicator will flash at 70 e Tire leak icon will light Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user The 30 under inflation value in pressure display is based on default or changed standard pressure FAST LEAK e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep twice every second e Tire leak icon will light Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user 19 oe EE O T www avetechnology com AVE HARRI ARA NO TIRE PRESSURE e Affected tire will flash during its turn when the unit is in operating mode e Unit will beep twice every second e Flat Tire icon will light Note Press to turn off the sound If the sound is turned off the Warning will remain on the display until the problem is taken care of by the user TEMPERATURE ABOVE 80
15. deleted it should be added back by repeating the procedure of setting sensor position When the deleted tire is flashing again learn the ID CODE with an LF or by rapidly deflating inflating the tire Spare tire can be deleted or added back in the same way Please attend when you learn the sensor ID into the display please take other sensors away in the distance of 3 meters to avoid learning the other sensor ID Functions of the four buttons of LF A Warning mode Make sensors transmit signals per second for two minutes After two minutes the sensors will get into normal mode B Walk up mode Make sensors transfer signals every second for one minute After one minute the sensors will get into normal mode C Normal mode Make sensors transfer signals every 30 second D Sleep mode Make sensors into sleep mode without transmitting any signal and save the battery s life But when the sensor is put in the tire the sensor will detect having pressure and automatically wake up So when the sensor is installed in tire and you press D it will not sleep due to the pressure 21 www avetechnology com A A Te N Pu fer ENS AVE D an 11 Chart of Tire Setup Mode and Leak Test V FUNC Press and hold for 3 seconds CHG shown on the right Tire Change Mode bottom of the display Quit tire change mode and get to NO tire set up mode SET A YES w FUNC Select the tire changing way n real the tire th
16. e refer to page 13 As any other vehicle mode is picked TIRE SETUP MODE will not be launched 16 TIRE SETUP MODE 1 front left and rear left front right and rear right ce v FUNC 2 front right and rear left front left and rear right De Y FUNC www avetechnology com AVE HARRI ARA 9 9 Setup the sensor position It is sometimes necessary to re set up the sensor position especially when replacing a tire sensor replacing a new tire or mixing up tires after rotating them To set up the sensor position follow the steps below 1 Press and hold the two buttons and for 3 seconds Message area will display LT Leak Test and the front left tire will flash User will have 240 seconds 4 minutes to perform the leak test on each tire 2 Inflate or deflate the tire by 34 kpa or 5 psi within 4 minutes A sudden change in the tire pressure will cause the sensor to transmit signals continuously to let the display learn the sensor position 3 The display unit will beep once and the message area will show OK if the signal is received The flashing tire on the display unit will stop flashing Then the front right tire takes the turn to flash Follow step 2 to setup the front right tire Note All the tires take turns to be setup in the order 1 gt 2 gt 3 gt 4 Please refer to page 13 or the tire numbers of each vehicle mode 4 To delete a tire press fasera The message area will display DEL
17. e right bottom change and get of the display to tire set up mode Set up Tire 1 Tire 1 flash Don t set up the NO YES tire but confirm SET A w FUNC Yes delete Get the remote control near to delete the tire tire 1 tire 1 and press and hold B button for 5 seconds No don t delete but SET A skip tire 1 Tire 2 flash Tire 3 flash Follow the same steps to get to others Tire 4 flash 22 www avetechnology com AVE E NRD ARA g Advanced Yeh cle Electronics Technology Co td 12 AVE TPMS Extended Antenna Cable for Trucks Buses Trailers The far distance between the driver cabinet and the rear tires like a truck or bus may cause the poor antenna Besides the thickness of the vehicle stamping parts car window films with volumes of metal material and so on will also cause the interference with the signal transmitting To make sure of the signal well transmitted and well received an extended antenna cable would be strongly in need for trucks buses trailers Make sure the connection is tight enough a Figure 2 Red line Antenna Cable x Figure 3 Must set the antenna cable to the central area among all the wheels 23 www avetechnology com AVE HE PE SRA BBR A N Advanced Veh cle Electronic Technology Co td 13 AVE TPMS Optional Accessories Battery Pack 8AA e Battery Pack allows display unit to be carried around for easier setup e Users do not have to
18. en normal green and high temperature red Displays actual temperature value on the display unit Note Before receiving the signal it shows last recorded temperature 10 e 4 TRUCK MODE www avetechnology com AVE E Be SBA D A BRA ol 9 Operating AVE TPMS 9 1 OPERATING MODE AVE TPMS display unit will monitor each tire for 10 seconds and then proceed to the next tire Problematic tire will be monitored for 15 seconds before proceeding to the next tire It will keep displaying the warning code until the problem has been taken care of by the user For the alerts warnings codes please refer to the Reacting to Alerts section The tire being monitored will light and its information will be displayed i e pressure temperature tire sensor battery level and signal strength Note User has the option to turn off the beeping sound by pressing button 9 2 FUNCTION MODE To review every tire s condition quickly Press button once to enter FUNCTION MODE Message area will display FUN Press for next tire selection Press for previous tire selection To exit do not touch the display unit for 20 seconds Note If there is 20 seconds or more of inactivity the system will quit the FUNCTION MODE and return to OPERATING MODE 11 www avetechnology com AVE HARRI BAG 9 3 UNIT MODE To change pressure or temperature unit Press and hold button for 3 seconds to enter UNIT MODE 1
19. flating the wheels when rotating or changing the tires Remote Control is the best choice Without an LF Remote control please rapidly inflate or deflate the tires which functions the same as pressing the button B of the LF Remote control Set Reset the sensor position with LF Setting the sensor position 1 First press and hold the buttons on the display and together for 3 seconds to enter TIRE SETUP MODE It will display CHG and then press NO to learn the ID CODE of the sensors while the message area will display LT Leak Test and the front left tire will flash TIRE SETUP MODE is only launched for MO1 p 13 2 Press the learning key B of LF make LF near the valve stem of the front left tire which will force the sensor to transmit signals so that the display can learn the position of the wheel The display unit will beep once if the signal is received and the message area will display OK and then the message area will turn to the next tire automatically Before OK displayed please do not move the LF away from the wheel Repeat the same for the remaining tires Delete Skip one sensor Follow step one to enter TIRE SETUP MODE When LT is displayed on the message area press NO The message area will display DEL Press l r FUNC yES to delete the tire or press NO to skip setting the tire If any sensor is skipped its previous status will be also kept Once the tire has been
20. isplay to notify the driver Prompt action needs to be taken to avoid accidents and ensure the safety of the driver and their passenger 2 Notice FCC Notice This device complies with part 15 of the FCC rules Operation is subject to the following two conditions e This device may not operate because of harmful interference e The undesired operations may cause system failure This equipment has been tested and found to comply with the limits for Class B devices pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference This equipment can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a correct installation lf this equipment does cause harmful interference to radio and television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the factoring measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment the system e Change the place and connection way of receiver Attention Any changes or modifications in construction of this device could void the user s authority to operate the equipment To comply with the FCC RF exposure compliance requirements this device s
21. nd the valve Screw the two nuts one by one with 3 5 nm strength not more nor less Too much strength will cause the impression of the rubber rings while too little strength will cause the leak Both can make the air leaking of the wheel Clean the inside of the tire from any dust and inflate the tire to the proper pressure as recommended by the tire manufacturer The tire must be inflated to the proper tire pressure to activate the tire sensor 700Kpa 1400Kpa Tires MUST be balanced after the tire sensor has been properly installed Tires must be balanced by professional personnel Be sure to install the tire into the proper location as per the tire sensor If you fail to do this the TPMS unit will give you readings from the wrong location Follow the above procedure for the other 3 tires Once the tire sensors have been properly installed connect the display unit to vehicles cigarette lighter power AVE TPMS will then detect signals from the tire sensors If there is no signal disconnect the power to the display unit re connect it and try again If there is still no display try a third time If after the third try you still have no signal please reset the display unit Please refer to Tire Setup Mode on page 19 Note There is no need to setup up the tire location as it is preset at the factory This is only applicable if the tire installation is according to the position on the sensors label www a
22. ng signals from tire sensors only if the tire sensor has been installed and after the tire is inflated Please proceed to Tire Sensor Installation on page 5 Note There is no need to set the tire position on the TPMS Unit It has been pre set at the factory It is important to install the tire according to the tire position on the sensors label Vehicle with four wheels front left front right rear right rear left To set up a vehicle with more than 4 wheels please set up tire location in accordance with page 13 www avetechnology com AVE FE Be SBIR A BR 2 ol 7 Tire Sensor Installation Remove washer not needed Process E Photo Remove tire from the vehicle Deflate the tire and remove the tire from the rim Seek assistance from qualified personnel if necessary Each sensor has a small label attached showing the wheel position it needs to be Front Left 1 Front Right 2 Rear Left 3 Rear Right 4 Vehicles with more than 4 wheels please set up in accordance with page 13 Install the sensor inside the wheel MAKE SURE the tire sensor is installed into the intended tire Front right Rear Left etc Note AVE TPMS uses a common metal valve If necessary it is easy to change the valve at any tire shop Do not hit the tire sensor when the wheel is taken apart 7 www avetechnology com Vv ae Pu fer ENR AVE E EERS Be sure the rubber seal is properly positioned between the rim a
23. rely on the power from the vehicles cigarette lighter power cord e Useful when setting up vehicles with a lot of wheels e AVE TPMS will support up to 27 wheels LF Remote control for Tire Sensors e The LF remote control is used to control the tire sensors The 2 main functions include Learning Key A Press this key to force the sensor to transmit a signal without inflating or deflating the tire s pressure to learn the wheel position It also has the function to exchange the tire s position Xx Sleep Key D It will force the sensor into sleep mode so it will save the tire sensor s battery power This will only work if the sensor is removed from the wheel or there is no air pressure in the tire As soon as the sensor detects air pressure the sensor will automatically wake up This is useful when changing tire location tire rotation to setup up the tire position It will force the tire s sensor to transmit a signal instead of performing the leak test page 19 Use as a diagnostic tool to test the tire s sensor if a sensor is transmitting a signal Standard Valve AVE TPMS uses a standard metal valve Common valve which is available anywhere Allows you to replace just the tire valve if it is bo damaged or broken You do not have to replace Remove washer the entire sensor not needed With other TPMS units you have to replace both the valve and the sensor if either one is broken or damaged Tire
24. to step 6 to re enter information e f error ERR occurs for the second time the system will replace the pressure to the default value and then return to the operating mode Note If the pressure is above 999 kpa only psi or bar Unit can work Please refer to Unit Mode p 12 14 www avetechnology com AVE HARRI ARAT 9 5 Setup the 2 Standard Pressure Value Only with setting up the standard tire pressure value the message area will display 2ND which is to setup the second standard pressure when necessary The previous setup will be the 1 standard tire pressure value 1 To set up the second standard pressure value press YES and follow the steps 7 to 10 of PRESSURE SETUP MODE on page 14 2 To exit without setting up the second standard pressure value press NO to return to the OPERATING MODE 10 seconds of inactivity will also exit this setting and return to the operating mode 9 6 Match Tires and the 1 or 2 In the operating mode press and hold button for 6 seconds and the message area displays SEL Select 1 or ie standard pressure value Tires in the same row will flash together one row by one row The spare tire will flash individually Please press SP1 or LY Func gpo to match every row of tires and the 1 or the 2 standard pressure value The unit will beep once when matched Afterwards the unit will automatically return to the operating mode Standard Pressure
25. vetechnology com AVE SEA hI ARATI 8 Display Unit Introduction i vi i I 100 ee a a aa ab U a S O ka S aa U N D QO Ta Sensor battery icon Measures the Tire Sensor battery level 2 Signal strength icon Measures the signal strength from the tires sensor Vehicle battery reading Monitors the vehicles battery in operating mode If it is above 15 5V or below 11 5V it will flash and has a warning sound ENUEN E HAREE 9 www avetechnology com AVE HE PERL AR GB BRS ol Advanced Veh cle Electronic Technology Co td Pressure Warning icon Will light when the Tire Sensor detects any irregularities in Tire Pressure i e Fast Slow leak tire pressure above or below 30 of recommended pressure Flat tire icon Will light when flat tire is detected High Temperature Icon Will light when the temperature inside the tire is above 85 C 185 F Wheel types car or truck mode Up to 8 modes of vehicle type selection Programmable up to 27 tires Optional monitoring for spare tire Pressure Meter e Measures 3 different pressure units KPa bar psi e Color difference to differentiate between normal Green and warning Red e Displays actual pressure value on display unit Note Before receiving the signal it shows last recorded pressure Temperature Meter Measures degrees Celsius C or Fahrenheit F Different colours to differentiate betwe
Download Pdf Manuals
Related Search