Centros™ Manager
Contents
1. disk that contains the driver you want to install click Have Disk Show compatible hardware Model ERI GPS Camera Detect atm6124 Svs ATMEL ATSLiccox Test Boar A This driver is not digitally signed Tell me why driver signing is important NOTE If the Atmel driver does not appear in the list of compatible hardware you may not have installed the Atmel driver when you installed Centros Manager and will have to do a complete reinstallation of all the software components Step 8 Press Close Wy Q Update Driver Software atm6124 Sys ATMEL AT91 000x Test Board Windows has successfully updated your driver software Windows has finished installing the driver software for this device atm6124 Sys ATMEL AT91 000 Test Board Step 9 Device Manage USB controller list should now be updated automatically ww Q Update Driver Software atm6124 Sys ATMEL AT91 00x Test Board Windows has successfully updated your driver software Windows has finished installing the driver software for this device atm6124 Sys ATMEL AT91 00x Test Board NOTE If you disconnect your unit the Atmel driver will be removed from this list but will reappear when the unit is reconnected Centros Manager Operation Manual 15 Update USB Driver for Windows 7 Step I Press the Start button and select Control Panel A Getting Started Fa Connect to a Projector Calculator Er Sticky Notes ag Snipping Tool Centros2. 3 Open Centros Manager Start gt Programs gt Centros Manager and select Locator eCAL Validation 4 Click the Load Validation Key icon on the toolbar 5 Copy and paste your eCAL validation key from your validation email into the Add Validation Key dialogue This is the key that you received in your confirmation email when purchasing your eCAL key and is similar to this 17742 49492 05437 63020 63735 52484 49044 63284 54197 48120 58075 42996 55623 23514 13212 50900 6 Click Add then Exit 7 Check that your new key appears under the Key List in the unit manager To do this highlight the serial number of the locator under Unit Manager and click on Expand Tree icon on the toolbar Under Keys any keys will be displayed by date when they were loaded Each key will be valid for 12 months and can be used throughout this period to validate the same serial number of locator as many times as you wish Centros Manager Operation Manual 7 8 Switch on the locator At this stage the screen on the locator will be blank with the backlight switched on Click the Run eCAL Validation icon on the toolbar and eCAL will now validate the locator against the original factory calibration Do not disconnect the locator until this process is complete The User Message window will keep you informed of progress Once the validation has completed a window will appear containing the test results and a Pass or Fail When you click OK you
3. Use of eCAL software is bound by license agreement a copy of which is included in the eCAL download bundle li Centros Manager Operation Manual Copyright Statement Copyright 2010 Radiodetection Ltd SPX Corporation All rights reserved Radiodetection is a subsidiary of SPX Corporation SPX and Radiodetection are trademarks of Radiodetection Ltd and SPX Corporation Due to a policy of continued development we reserve the right to alter or amend any published specification without notice This document is protected by copyright and may not be copied reproduced transmitted modified or used in whole or in part without the prior written consent of Radiodetection Ltd Trademarks RD8000 RD7000 RD7000 RD5000 Centros eCAL and SurveyCERT are trademarks owned by Radiodetection Ltd all rights reserved Windows and Windows Vista are registered trademarks of Microsoft Corporation all rights reserved Apple and Mac are registered trademarks of Apple Inc registered in the U S and other countries all rights reserved Atmel is a registered trademark of Atmel Corporation all rights reserved Table of Contents Preface Before you begin Important Notice Copyright Statement Trademarks section 1 Introduction to Centros Manager 1 1 About Centros Manager Software Update eCAL Option Editor 1 2 System requirements 1 3 Before you begin Section 2 Installing Centros Manager 2 1 Installing wit
4. and Penonehceten Clock Language and Regar bane of Aice Windows Firewall Check firewall staus Allm a peeqrem through Winds Firewall E System L Viw amount of RAM and procesar werd E Siew nemuobe acess Check the Windews Eqnerience indies See the name of this computer G Device Manager ep Windows Update Tum automate updating anara Check forupdates View installed updates Power Options Require a passerord when Lie cownpuler eae Change when chet compater sheeps Backup and Restore Back wp your Corpuier Change whel the power lutions d Reiieie hler trom backup Windows Anytime Upgrade Get more features wilh a new ehian of 16 Centros Manager Operation Manual Step 4a Connect USB cable from PC to unit and switch on unit The list of USB Controllers should be refreshed with the new Atmel Driver added NOTE In some cases the driver may appear in the Ports COM amp LPT section This may be due to the use of a USB to Serial chip converter within the PC hardware Step 4b Select the driver that appeared in Step 4a to update currently associated with device Right Click on driver name and select Update Driver Software File Action View Help oe bl a or Re or eo 4 g Ratng PC Computer ca Disk dreves Sy Display adapters A DVD CD ROM drives weil Floppy disk drives el Floppy drive controllers Os Human Interface Dences Cg IDE ATA ATABI controllers Keyboards A Mice and other pointin
5. select Control Panel Radrodetection Documents Step 3 Select Device Manager View basic information about your computer Viendows ediman Wondeows Vista Home Premwurn Copynght 2006 Microsoft Comoration All nghis reserved Upgrade Windows Vista System FlexiSight Microsoft Word ha Backup and Restore Center Ea Pictures Music Games Rating Processor Memory RAM System type Inite R Core FM 2 CPU 1013 MB 32 bit Operating System ndows cxpenence indes 6400 213GHe 213 GHz Computer name domain and workgroup settings Computer name Full computer name Computer description Workgroup VISTAPREM VISTAPREM Ech nge settings WORKGROUP GP Microsoft Visual Studio 2005 FlexiSight a Motepad zi Er Trx Centros Manager 5 Flexisight NET EN Command Prompt gt All Programs Start Search Step 2 Select System Fie Edit View Took Help Fi gt Control Pane Category rem 4E Adrurnistrat a Pen and Performance Personaliz Input Devices Problem Reports a SoundMAX Prntes sound AudokSP Record Cia cla wy m Recent Items Computer Network Connect To Control Panel Customiz Default Progra ger pi Help and Support mr p 65 Fay Centros Manager 5 AutoPlay internet Optears CS Intrater Keyboard a Mouse Network and Shanng Cr g Phone and Pow
6. 4 Click the Load Software Update Key icon on the tool bar 5 Copy and paste your electronic update key into the Update Key dialog box This is the key that you received in your confirmation email when registering your product and is similar to this 45520 47537 60028 18163 24316 20007 02791 11890 6 Click Add then Exit 7 Switch on the locator At this stage the screen on the locator will be blank with the backlight switched on Click on the Download Software icon and the latest software will now automatically install into your locator You can view the progress of the installation in the Users Message window The download will take approximately 5 minutes to complete NOTE You may experience a problem with the USB recognizing the locator Refer to Section 7 for more help and information WARNING In some circumstances software updates may overwrite the user settings on the locator such as Power Frequency 50Hz 60HZ StrikeA ert Enable Disable and Units metric imperial Please update your user settings after any software update prior to using your locator 8 Once the transfer is complete disconnect the locator from your computer and close the battery compartment When you switch on the locator you can check that the latest software has been downloaded On switch on the locator model type will appear in the bottom left of the screen followed by a 4 digit number This number should correspond to the 4 digit number i
7. amp m e Computer Management Local 2 System Tools i D ifm Event Viewer B Shared Folders i B 2 Local Users and Groups B g Performance Logs and Alerts Manager S Sq Storage Removable Storage fF Disk Defragmenter Disk Management E P Services and Applications I File Action View Window Help Bluetooth Devices bg Computer Es Disk drives Display adapters 4 4 DVD CD ROM drives 3 Human Interface Devices H E IDE ATA ATAPI controllers E Keyboards 7 Mice and other pointing devices Monitors E9 Network adapters E Eh Other devices i Bluetooth Hands free Audio j Bluetooth Stereo Audio ce Y Ports COM amp LPT BBA Processors m Sound video and game controllers E System devices Universal Serial Bus controllers Step 3 Expand Ports COM amp LPT and Universal Serial Bus Controllers E A Ports COM amp LPT J Bluetooth Communications Port COMS y Communications Port COM 1 wy Communications Port COM2 LY ECP Printer Port LPT2 s Processors 4 Sound video and game controllers System devices Universal Serial Bus controllers Intel R 280 1GB USB Universal Host Controller 27C8 Intel R 8280 1GB USB Universal Host Controller 27C9 Intel R 8280 1G8 USB Universal Host Controller 27CA Intel R 8230163 USB Universal Host Controller 27CB Intel R 280 1GB USB2 Enhanced Host Controller 27CC USS Root Hub USS Root Hub U
8. downloaded On switch on the transmitter model type will appear in the bottom left of the screen followed by a 4 digit number This number should correspond to the 4 digit number in brackets at the top of the Transmitter Software Update Window Section 5 Locator eCAL validation eCAL is part of the Centros Manager application and is a utility that validates a locator against its original factory calibration Once validated eCAL will issue a certificate with a pass or fail statement which you can print NOTE Before you can validate the calibration of a locator you must carry out the following 1 Download the latest version of Centros Manager if not already done so and download the latest version of software to the locator 2 Purchase an eCAL validation key which may be purchased by going to www radiodetection com eCAL 3 Register your product for a free extended warranty by going to www radiodetection com extendedwarranty NOTE If you are using a laptop computer make sure your laptop is sufficiently charged or you may find your laptop cannot supply sufficient power for the locator If this is the case you are advised to load Centros Manager onto a desk top PC NOTE eCAL checks the calibration of the instrument by applying a known magnetic field to the antennas The antennas will still be receiving external signals so the eCAL results may be affected by external interference or the proximity of metal objects Bef
9. lt Important Messages Appear Here gt 9 BBM 4 a F inportant tofermationy Regering eCat Faer yr WLI WLM L LOK OS PLS Th IOLO PL SL Th SON POR P Unt Maneger His sh8 0 5 BE Factory Calbratore n X OB orizz al T Jt ODOC ee AL VAS 5 ie gt T pe TP i fo TF hi gE 2 e ity Baa m W tas WA SL 1234 ty iS lt gt rs 0B amp ae undo Redo Tim Wrap Ona Heb Rinaxty 24 Sep 2010 1552 11 Setup By highlighting File in the toolbar of each window a drop down menu will appear Click on Setup and you will be given the opportunity to change the date format that will appear on the eCAL pass or fail certificate Setup options Date Format Select UK dd mm yyyy or USA mm dd yyyy date format Overlay Hides software files in the locator and transmitter download windows with a picture of the locator or transmitter Software Updates Select Full to always update the software in your locator transmitter or Incremental to only update the software if a newer version is available By clicking on More gt gt a window will appear displaying the various paths for the folders created when installing Centros Manager The information is listed under 4 tabs Products User Updates and Miscellaneous Under the Products Tab e RD5000 Folder Tells Centros Manager where to locate the software for the RD5000 locator e RD7000 Folder Tells Centros Manager where to locate the software for
10. may disconnect the USB cable 5 3 Retrieving original factory calibration The original factory calibration results for the locator can be retrieved for view or print Note You do not have to purchase an eCAL Validation key to retrieve this data 1 Connect your locator to your computer using the supplied USB cable On the locator the USB port is located inside the battery compartment 2 Open Centros Manager Start gt Programs gt Centros Manager and select Locator eCAL Validation 3 Switch on the locator At this stage the screen on the locator will be blank with the backlight switched on Click the Get Original Cal Data icon on the toolbar eCAL will now retrieve the original factory calibration data Do not disconnect the locator until this process is complete You can view the progress in the User Message window Once the operation is complete you may disconnect the USB cable 5 4 Printing certificates Once the process of Validation or retrieval of Original Factory Calibration Data is complete a new entry will appear under the Calibration History list in the Unit Manager You can now view or print the Validation Certificate or Original Factory Calibration Data To do so 1 Select and expand the required serial number Original Calibration Data will be listed under the Factory Calibrations sub folder and eCAL Validations Data will be listed under the eCAL Validations sub folder and eCAL Validation keys will
11. appear under the Keys sub folder 2 Expand each icon to view the data 3 Using your mouse select a date from either the Factory Calibrations or eCAL Validations sub folder The Certificate will automatically be displayed on the right hand side of the window 4 To print the certificate either select the Print Certificate button that appears above the certificate or press the Print icon on the toolbar 8 Centros Manager Operation Manual E Centres Manager 6 eCal Validation Fle View Wed Heb lt Important Messages Appear Here gt SHBNMaA Bue Important Intormabon Regarding ecar Fier bok WU iM L LOE LOC STL L bork Fa Monee A i S F iqari or E B we Radiodetection AN SPX COMPANY S37 Es p 3 Certificate of Validation Serial Number 10 SKPDLB 1 5 paataaaa Model RDS000 4 AAA i ti x Test Date 07 1072009 PASS This certificate shows the product isted below has passed validation against the orginal calidrabon Test Results Ready eo M16 NOTE Although keys are only valid for 12 months you can view or print certificates as many times as you require Unlike keys certificates do not expire 5 5 eCAL Failures eCAL checks the calibration of the instrument by applying a known magnetic field to the antennas The antennas will still be receiving external signals so the eCAL results may be affected by external interference or the proximi
12. locator At this stage the screen on the locator will be blank with the backlight switched on Click the Download Settings to Unit icon on the toolbar Centros Manager will now download the revised settings to your locator Do not disconnect the locator until download is complete You can view the progress in the User Message window Centros Manager Operation Manual 9 6 3 Saving your configuration settings 1 Select the correct model of locator 2 Select CD FF Sonde Active or General to edit the details of your locator configuration 3 Select the Save Settings icon on your toolbar 4 Enter a name for your setting in the dialog and press ok 6 4 Loading your saved configuration settings 1 Select the correct model of locator 2 Select the Open Settings icon on your toolbar 3 Select a saved setting name from the dialog and press ok 4 You can now choose to download these settings by referring to section 6 2 6 5 Managing your configuration settings 1 Select the correct model of locator Select the Manage Settings icon on your toolbar Select a setting from the dialog A O N a Select Rename on the dialog to change the name of your setting or b Select Delete on the dialog to remove the setting from your list 5 Select Exit to close the dialog 10 Centros Manager Operation Manual Section 7 Appendix 7 1 Administrator Please ignore the following instructions if yo
13. software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Dont search will choose the driver to install Choose this option to select the device driver from a list Windows does not guarantee that the driver you choose will be the best match for your hardware Teno STOP instalation Step 9 Step 11 Select Atmel Driver and press Next button Press Finish button and close Computer Management dialog Hardware Update Wizard C Select the device driver you want to install for this hardware oN Hardware Update Wizard Y Completing the Hardware Update Wizard 7 Select the manufacturer and model of your hardware device and then click Next f you The wizard has finished installing the software for have a disk that contains the driver you want to install click Have Disk atm6124 Sys ATMEL ATS looox Test Board Show compatible hardware Model atm6124 Sys ATMEL ATS booox Test Board A This driver is not digitally signed Tell me why driver signing is important Click Finish to close the wizard lt Back Finish Cance canes Centros Manager Operation Manual 13 Update USB Drive Step 1 Press the Start button and Internet Explorer E mail Windows Mail r for Windows Vista
14. the RD7OOO locator e RD7000 Folder Tells Centros Manager where to locate the software for the RD7000 locator e RD8000 Folder Tells Centros Manager where to locate the software for the RD8000 locator e TX 1 Folder Tells Centros Manager where to locate the software for the TX 1 transmitter e TX 3 Folder Tells Centros Manager where to locate the software for the TX 3 transmitter e TX 10 Folder Tells Centros Manager where to locate the software for the TX 10 transmitter Under the User Tab e Validation File Sets the location of the validation file This file contains the validation keys the user has loaded into the application and the details of all calibration certificates created e Download File Sets the location of the download file This file contains the download keys the user has loaded into the application e Menu Settings File Sets the location of the menu settings file This file contains the saved settings from the configuration editor Centros Manager Operation Manual 3 Under the Updates Tab e Frequency Allows the user to determine how often they wish to check for updates of Centros Manager and Locator Transmitter software Centros Manager will automatically check for updates when it is run depending on this value This will require a live Internet connection e Products Allows the user to specify which products they wish to receive notification of updates for Under the Miscellaneo
15. 3 0 2 35 90 95 58 Email rd sales fr spx com Web http fr radiodetection com Radiodetection Benelux Industriestraat 11 7041 GD s Heerenberg Netherlands Tel 31 0 314 66 47 00 Fax 31 0 314 66 41 30 Email rd sales ni spx com Web http nl radiodetection com Radiodetection Germany Groendahlischer Weg 118 46446 Emmerich am Rhein Germany Tel 49 0 28 51 92 37 20 Fax 49 0 28 51 92 37 520 Email rd sales de spx com Web http de radiodetection com Servicing and repair Radiodetection has a team of factory trained service technicians operators and training personnel and dedicated service facilities Turnaround is fast and costs are Radiodetection head office will put very competitive Product training for your is available on your site or at Radiodetection s headquarters Training is with qualified instructors and each trainee receives a certificate to confirm they have received the training Asia Pacific Radiodetection Asia Pacific Room 708 CC Wu Building 302 308 Hennessy Road Wan Chai Hong Kong SAR China Tel 852 2110 8160 Fax 852 2110 9681 Email rd sales cn spx com Web www radiodetection com Radiodetection China Hongfu Mansion Room 61622 Zheng Ge Zhuang Bei Qi Jia Town Chang Ping District Beijing 102209 China Tel 86 O 10 8975 5540 Fax 86 0 10 8975 5640 Email rd service cn spx com Web http cn radiodetection com Radiodetection Aus
16. Centros Manager Application for managing Radiodetection s locators and transmitters Operation Manual Issue 7 November 2010 For use with Centros Manager 6 or later E Radiodetection AN SPX COMPANY 90 UG081ENG 07 Preface Before you begin Please read this user manual before installing Centros Manager and attempting to use the facilities within Centros Manager Note that this manual and all its contents are subject to change Radiodetection products are under continuous development Radiodetection Limited reserves the right to modify the product without notice and some product changes may have taken place after this user manual was published Contact your local Radiodetection dealer or visit www radiodetection com for the latest product information including this manual and the bundled software Important Notice Radiodetection makes every effort to ensure that all technical information statements and recommendations about its products are based on information believed to be reliable but the accuracy or completeness thereof is not guaranteed In no event shall Radiodetection be liable for any loss inconvenience damage or problems caused through use of any equipment or software Before using any Radiodetection product including eCAL the user should determine the suitability of the product for its intended use The user assumes all risks and liability whatsoever in connection with such use
17. Manager 5 Z Paint Step 2 Documents Pictures Miuse Computer Control Panel Devices and Printers Default Programs Help and Support Select System and Security Step ge 3 Hardware and Sound 8 ll ile i mel e E Control Pa Feoreh Corina Pangi Adjust your computer s settings View inp Category Rirvene your oorrguger 9 aliri Back up yeu rem Stem ana Serurity Find and fa probly MY and change system end secunty Salus back up and restore hie are Network and ie uiian uplale yiri aa dherek Ai computer vira RAM and procrssor Chiis koriepal speed check firewall and more User Accounts and Family Satety a Aid ae pein uae acions a fet up parental combreds for arny wrer Appearance and Personalization Change the theme Change devkiog background Avdjurt site en resolution Aw Clock Language and Region Le Change kerboends c other input methods wim base of Access Lat Windows suggest settings r Optimize visual display View devices and printers Auld davit Programs Wrireall a peegram Select System Control Panel kom System and Sreurity Hetaark and internet Action Center Renew your computer s sakus and nesohee stu W Change User Account Control settings Troubleshoot common computer problems Riewione your t Uru ee l n tailor torte Hardware and Sound Programs User Accounts and Famray Safety Appeaminc
18. SB Root Hub USS Root Hub USS Root Hub TROECO i Step 4 Connect USB cable from PC to unit and switch on unit The list of USB Controllers should be refreshed when the new Atmel Driver added NOTE In obscure cases the driver may appear in the Ports COM amp LPT section This may be due to the use of a USB to Serial chip converter within the PC hardware Step 5 If for any reason you believe that the driver may not be installed properly please perform the following actions Select the Driver to update Right Click on driver name and select Update Driver 12 Centros Manager Operation Manual A Gd Porte COM amp LPT on Bluetooth Communications Port COMB oo dif Communica tons Port COM vn Communications Port COM he Ud ECP Printer Port LPT1 aaa Processors Ey Sound video and game controllers FA System devices f Uniwersal Serial Bus contallers atmoi24 5ys ATMEL ATS Lo Update Driver 7 Intel Fi 4250166 USE Univers ede Intel R 8250165 USB Univers 7 Intel R 8280168 Use Univers Unstall Intel R 8280168 USE Univers Intel R 82801656 USk2 Enha USB Foot Hub Scan for hardware changes Properties Step 6 Select No Not this time in Hardware Update Wizard and press Next button Hardware Update Wizard Welcome to the Hardware Update Wizard Windows will search for curent and updated software by looking on your computer on the hardware installation CD or on the Wi ann
19. base ee eS Sh Manage settings database rename delete saved settings 8 Find settings lists any saved settings matching displayed configuration 9 Select locator model Editor 1 Connect your locator to your computer using the supplied USB Cable On the locator the USB port is located inside the battery compartment 2 Open Centros Manager Start gt Programs gt Centros Manager and select Locator Option Editor 3 Switch on the locator At this stage the screen on the locator will be blank with the backlight switched on Select the correct model of locator from the drop down menu opposite the Select Unit Type 4 Click the Upload Settings from unit icon on the toolbar Centros Manager will now retrieve the current settings from your locator Do not disconnect the locator until upload is complete You can view the progress in the User Message window 5 Under Select Group select CD FF Sonde Active or General to view the details of your locator configuration 6 2 Downloading a configuration to your locator 1 Connect your locator to your computer using the supplied USB Cable On the locator the USB port is located inside the battery compartment 2 Open Centros Manager Start gt Programs gt Centros Manager and select Locator Option Editor 3 Select the correct model of locator and select CD FF Sonde Active or General to edit the details of your locator settings 4 Switch on the
20. e a eai site faith your permission Can Windows connect to Windows Update to search for softwere O Yes this time only Yes now and every time connect a device No not this time Click Next to continue Step 7 Select Install from a list of specific locations Advanced and press Next button Hardware Update Wizard This wizard helps you install software for atm 124 Sys ATMEL ATS loco Test Board H your hardware came with an installation CD So or floppy disk insert it now Wheat do you want the wizard to do Install the software automatically Recommended Install from a list or sp ecific location Advanced Click Nest to continue Step 8 Step 10 Select Don t Search I will choose the driver to install If the following dialog appears press Continue Anyway and press Next button button Please choose your search and installation options The software you are installing for this hardware O Search for the best driver in these locations atm6124 Sys ATMEL ATS lxcox Test Board Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver found will be installed has not passed Windows Logo testing to venfy Rs compatibility with Windows XP Tell me why this testing is important v Search removable media floppy CD ROM include this location in the search cede Continuing your installation of this
21. e option to save Centros Manager to a destination of your choice Once you select the destination the Centros Manager executable program will download to that destination Once completed you will have the option to Run or Open Folder At this stage Centros Manager has not been installed so you can either select Run and Centros Manager will automatically install or you can choose to Open Folder When you open the folder the Centros Manager executable file will be available To install double click on this file 5 Once Centros Manager is installed run from the Windows Start menu under Programs 2 2 Upgrading Centros Manager When Radiodetection releases a new version of software for its locators and transmitters the new version of software will be contained within a new version of Centros Manager All users that have registered for Radiodetection s extended warranty program will automatically receive an email advising them that a new version of Centros Manager is available You can download the new Centros Manager Application bundle from www radiodetection com centrosmanager 2 Centros Manager Operation Manual 2 3 Using Centros Manager Once you have installed Centros Manager on your computer take a few moments to familiarize yourself with the program before you attempt to update your software edit your locator configuration or use eCAL When you open Centros Manager the main Centros Manager window will open t Centro
22. e pick from a list of device drivers on my computer This list will show installed driver software compatible with the device and all driver software in the same category as the device Step 9 Step Device Manage USB controller list should now be updated Select the Atmel driver ATMEL AT91xxxxx Test Board automatically from compatible hardware list and press Next o STEE _ NOTE If the Atmel driver does not appear in the list CEEE B e of compatible hardware you may not have installed a YRS the Atmel driver when you installed Centros Manager m a S and will have to do a complete reinstallation of all the gt aaae aa software components r IP rons COMA LPD OI Communications Port COML T Communications Part COM2 PH ECP Printer Part LPT1 Processors Sound video and game controllers m System devices a Unmvessal Seral Bus controllers _atr124 Sys ATMEL ATS Loon Test Board InteNR 828016 CHT Family USS Universal Host Controller 278 E Intel R 828016 ACH Family USO Universal Host Controller 27C9 Intel R 828016 ACHI Family USO Universal Host Controller 27CA InteXR 828016 CH Family USS Universal Host Controller 27CB Inte 82816 ICH Family USS Enhanced Host Controtier 27CC USS Root Hub USB Root Hub USS Root Hub USB Root Hub USS Root Hub 4 Update Driver Software GPS Camera Detect COM4 Select the device driver you want to install for this hardware Sel
23. ect the manufacturer and model of your hardware device and then click Next If you have a a diskthat contains the driver you want to install click Have Disk Show compatible hardware Model a GPS Camera Detect atm6124 Svs ATMEL ATSliccox Test Boar NOTE If you disconnect your unit the Atmel driver will be removed from this list but will reappear when the unit is reconnected Ay This driver is not digitally signed Tell me why driver signing is important Centros Manager Operation Manual 17 7 4 Installation Folders The installation process will create the following folders on your PC lt ApplicationFolder gt lt DataFolder gt lt DataFolder gt Certificate lt DataFolder gt Help lt DataFolder gt RD8000 lt DataFolder gt RD7000 lt DataFolder gt RD7000 lt DataFolder gt RDS5000 lt DataFolder gt TX1 lt DataFolder gt TX3 lt DataFolder gt TX10 Where lt ApplicationFolder gt is C Program Files Radiodetection Ltd Centros Manager default path lt DataFolder gt is C Documents and Settings All Users Application Data Radiodetection Ltd Centros Manager on XP C ProgramData Radiodetection Ltd Centros Manager on Vista and Windows 7 18 Centros Manager Operation Manual World leaders Radiodetection is a proud member of the SPX group of companies which provide technical products and service solutions worldwide Radiodetection and its associated com
24. er Modem Options Programs Regional and ea and Security and Features Language Cortes mu i Speech Sync Center Tablet PC Taskbar and Sethnge Infoemates Program Updates Camera Start Mena se Pu im aac Ah 14 Centros Manager Operation Manual Wendows actrvaton Windows is activated genuine Pi Chenge product key Microsoft Step 4a Connect USB cable from PC to unit and switch on unit The list of USB Controllers should be refreshed with the new Atmel Driver added NOTE In some cases the driver may appear in the Ports COM amp LPT section This may be due to the use of a USB to Serial chip converter within the PC hardware Step 4b Select the driver that appeared in Step 4a to update currently associated with device Right Click on driver name and select Update Driver Software By Device Manager file Action View Help EE Afolinil anI ae s g Ratng PC Computer coq Disk dreves By Display adapters fj DVD CD ROM drives atl Floppy disk drives sell Floppy drive controllers Os Human Interlace Dences cg IDE ATA ATABI controllers lt gt Keyboards A Mice and other pointing devices BS Monitors Network adapters a F Ports COM amp LPT Cammunications Port COMI Communications Par COM 1 ECP Printer Port LPTL TH GPS Camera Detect ALUS pu ie a4 BD Processors Update Driver Software a Sound video and game D
25. g devices Monitors Network adapters a F Ports COM amp LPT Camenunications Port COM O Communications Par COM ECP Printer Port LPT YD GPS Camera Detect AMU BD Processors Update Driver Software amp Sound video and game Disable fas System devices Uninstall Universal Serial Bus con Sean for hardware changes Properties Launches the Update Driver Software Wizard for the selected device Step 5 Select Browse my computer for driver software e l Update Driver Software GPS Camera Detect COM4 How do you want to search for driver software gt Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device unless you ve disabled this feature in your device installation settings gt Browse my computer for driver software Locate and install driver software manually Step 6 Step 8 Select Let me pick from a list of device drivers on my Press Close computer and press Next wy Q Update Driver Software atm6124 Sys ATMEL AT91 000x Test Board D Update Driver Software GPS Camera Detect COM4 Windows has successfully updated your driver software Browse for driver software on your computer Windows has finished installing the driver software for this device Search for driver software in this location atm6124 Sys ATMEL AT91xcoox Test Board Documents Include subfolders gt Let m
26. h Windows 2 2 Upgrading Centros Manager 2 3 Using Centros Manager Locator Software Update Transmitter Software Update Locator Option Editor Locator eCAL Validation Setup Setup options User Messages window section 3 Locator software update Locator Software Update window Upgrading your Locator Software KF OU OO wow wow Ww MY NY NY PKS PN mo Ol Section 4 Transmitter software update Transmitter Software Update window Updating your Transmitter Software section 5 Locator eCAL validation 5 1 Purchasing Validation keys 5 2 Validating a locator 5 3 Retrieving original factory calibration 5 4 Printing certificates 5 5 eCAL Failures Section 6 Option Editor 6 1 Uploading your locator configuration 6 2 Downloading a configuration to your locator 6 3 Saving your configuration settings 6 4 Loading your saved configuration settings 6 5 Managing your configuration settings section 7 Appendix 7 1 Administrator 7 2 USB Tips amp Tricks 7 3 Update USB Driver Update USB Driver for Windows XP Update USB Driver for Windows Vista Update USB Driver for Windows 7 7 4 Installation Folders Oo O Cc co ao N N N Oo Centros Manager Operation Manual iii Section 1 Introduction to Centros Manager Centros Manager is a Radiodetection product support application for Microsoft Windows that can be downloaded via the Radiodetection website Once installed onto your PC or laptop Centro
27. isable W System devices Uninstall Universal Serial Bus con Sean for hardware changes Properties Launches the Update Driver Software Wizard for the selected device Step 5 Select Browse my computer for driver software wy Q Update Driver Software GPS Camera Detect COM4 How do you want to search for driver software gt Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device unless you ve disabled this feature in your device installation settings gt Browse my computer for driver software Locate and install driver software manually Step 6 Select Let me pick from a list of device drivers on my computer and press Next GO I Update Driver Software GPS Camera Detect COM4 Browse for driver software on your computer Search for driver software in this location C Users RdEng Documents Include subfolders Let me pick from a list of device drivers on my computer This list will show installed driver software compatible with the device and all driver software in the same category as the device Step 7 Select atm6124 Sys ATMEL AT91xxxxx Test Board from compatible hardware list and press Next Update Driver Software GPS Camera Detect COM4 Select the device driver you want to install for this hardware Select the manufacturer and model of your hardware device and then click Next If you have a
28. mputer 2 Try a different USB port 3 If you are using a laptop ensure you are using the highest performance power setting and that your laptop is sufficiently charged 4 You may find your laptop can t supply sufficient power for the locator In this case you are advised to load Centros on to a desktop PC 5 If using a high power USB hub ensure all other devices are unplugged to maximize power to the locator 6 Check the validity of the USB port and cable by connecting another device type to your computer 7 Manually select the correct driver refer to section 7 3 The following limitations should be taken into consideration 1 Centros Manager does not work on an Apple Mac 2 USB extension cables should be avoided 3 Transmitters need to be externally powered using the 12V mains adapter 7 3 Update USB Driver Sometimes the USB connection may not recognize the locator or transmitter If this is the case you will be required to manually update your USB driver Instructions vary due to operating system Update USB Driver for Windows XP Step 1 Right Click Mouse on My Computer Icon and Select Manage Open Explore Search Scan with Sophos Anti Virus Map Network Drive Disconnect Network Drive Create Shortcut Delete Centros Manager Operation Manual 11 Step 2 In Computer Management Dialog Select Device Manager Computer Manager ner t e
29. n brackets at the top of the Locator Software Update Window Centros Manager Operation Manual 5 Section 4 Transmitter software update From time to time Radiodetection will release new software for their transmitters to enhance features and improve performance All latest software updates are supplied within Centros Manager To obtain the latest Centros Manager refer to section 2 You can check the latest version of Centros Manager by visiting the Radiodetection website at www radiodetection com NOTE You must have an update key before you can update your transmitter s software Radiodetection will automatically issue you with an update key when you register for extended warranty To register go to www radiodetection com extendedwarranty Transmitter Software Update window E Centros Manager 6 Transmitter Software Up Tx update toolbar 1 Home Page Will take you back to the Centros Manager Home Page 2 Download Transmitter Software Stop Transmitter Download 4 Load Software Update Key Updating your Transmitter Software 1 Make sure you have your electronic update key before continuing 2 Connect your transmitter to your computer using the supplied USB cable On the transmitter the USB port is located under the battery compartment 6 Centros Manager Operation Manual 3 Note The USB connection on the PC or laptop will not supply the required power to switch on the transmitter Users ca
30. n purchase a suitable power supply from Radiodetection Alternatively with the USB cable connected to the transmitter place the transmitter on a flat surface without fully securing the battery pack In this orientation the pogo pins inside the battery compartment will make contact with the battery contacts to enable powering of the transmitter 4 Open Centros Manager Start gt Programs gt Centros Manager and select Transmitter Software Update 5 Click the Load Software Update Key icon on the tool bar 6 Copy and paste your update key from your warranty registration email into the Update Key dialog box This is the key that you received in your confirmation email when registering your product and is similar to this 45520 47537 60028 18163 2431 6 20007 02791 11890 7 Click Add then Exit 8 Switch on the transmitter at this stage the display on the transmitter will be blank Click on the Download Transmitter Software icon and the latest software will now automatically install into your transmitter You can view the progress of the installation in the Users Message window NOTE In the unlikely event that you experience a problem with the USB recognising the transmitter please refer to Section 7 for more help and information 9 Once the transfer is complete disconnect the transmitter from your computer and reinstall the battery pack When you switch on the transmitter you can check that the latest software has been
31. ntros Manager by visiting the Radiodetection website at www radiodetection com centrosmanager NOTE You must have an update key before you can update your locator s software Radiodetection will automatically issue you with an update key when you register for extended warranty To register go to www radiodetection com extendedwarranty Locator Software Update window Centros Manager 6 Locator Software Update File View Web Help Locator update toolbar 1 Home Page Will take you back to the Centros Manager Home Page 2 Download Locator Software 3 Stop Locator Download 4 Load Software Update Key Upgrading your Locator Software WARNING Interrupting the software update process may cause your locator to become inoperable Do not disconnect the locator from the computer until the process is complete If you are using a laptop computer make sure your laptop is sufficiently charged for the duration of the transfer You may find that your laptop cannot supply sufficient power for the locator if this is the case you are advised to load Centros Manager onto a desktop PC lt Important Messi 1 Make sure you have your electronic update key before continuing 2 Connect your locator to your computer using the supplied USB cable On the locator the USB port is located inside the battery compartment 3 Open Centros Manager Start gt Programs gt Centros Manager and select Locator Software Update
32. ore starting eCAL ensure the following 1 The locator is in free space or on a non metallic surface 2 The locator is as far as possible from sources of electromagnetic interference such as computer monitors 3 The transmitter is switched off NOTE eCAL is not applicable to the transmitter 2 Centros Manager 6 eCal Validation File View Web Help 4 B lt Important Messages Stes c iQGur eCAL Validation toolbar 1 Home Page Will take you back to the Centros Manager Home Page Run eCAL validation Get Original Factory Calibration Data Stop Validation Load eCAL Key Print Certificate print the currently displayed certificate ao yf SS a Expand Tree 8 Collapse Tree 5 1 Purchasing Validation keys Once you have purchased an eCAL Validation Key each Key is valid for up to 12 months from date of purchase and is valid for the serial number of the unit provided at purchase Although you may carry out as many eCALs as you wish on the particular unit during this time you must validate your locator within this time frame after which you must purchase a new key if you wish to perform another validation 5 2 Validating a locator 1 Make sure you have registered the locator and purchased an eCAL validation key before continuing 2 Connect your locator to your computer using the supplied USB cable On the locator the USB port is located inside the battery compartment
33. panies specialize in the design and manufacture of products for the location and maintenance of underground pipes and cables Our aim is to be viewed as the supplier of choice of high performance quality equipment using advanced product technologies We are also committed to both design innovation and customer support America Radiodetection 154 Portland Road Bridgton ME 04009 USA Tel 1 207 647 9495 Toll Free 1 877 247 3797 Fax 1 207 647 9496 Email rd sales us spx com Web www radiodetection com Pearpoint 72055 Corporate Way Thousand Palms CA 92276 USA Tel 1 800 688 8094 Tel 1 760 343 7350 Fax 1 760 343 7351 Email pearpoint sales us spx com Web www radiodetection com Radiodetection Canada 344 Edgeley Boulevard Unit 34 Concord Ontario L4K 4B7 Canada Tel 1 905 660 9995 Toll Free 1 800 665 7953 Fax 1 905 660 9579 Email rd sales ca spx com Web www radiodetection com Technical support Radiodetection equipment users have easy access to technical support A call to your regional representative or the you in contact with our team of field experienced technical experts Europe Radiodetection Ltd UK Western Drive Bristol BS14 OAF UK Tel 44 O 117 976 7776 Fax 44 0 117 976 7775 Email rd sales uk spx com Web www radiodetection com Radiodetection France 13 Grande Rue 76220 Neuf Marche France Tel 33 0 2 32 89 93 60 Fax 3
34. s Manager 6 File View Web Help lt Important Messages Appear Here gt Welcome to Centros Manager 6 Select An Application me 1 Locator Software Update We 2 Transmitter Software Update ey 3 Locator Option Editor az 4 Locator eCal Validation The four selectable options are as follows Locator Software Update Allows you to update your locator with the latest software TE Cention Manager Locator Software Update Trie View meh Hide ID E cimportant Messages Appear Here gt 1 Load Extended Warranty Key 2 Connect Locator to PC 3 Switch on Locator 4 Download Firmware Fendy Da Mre SIO ADENT Transmitter Software Update Allows you to update your transmitter with the latest software T Centros Manager 6 Trascanitter Software Update Is td Pe Wer Wet Pep lt Important Messages Appear Here gt 1 Load Extended Warranty Key 2 Connect Transmitter to PC 3 Connect Transmitter to 12V Power Supply 4 Switch on Transmitter 5 Download Firmware Locator Option Editor Allows you to change the configuration of your locator F Centres Manager amp Option Editer REF Fi Yew Web Help important Messages Appear Here gt 9 pH n p BE Aisah e DO EEE T Locator eCAL Validation Allows you to validate and verify if the locator is within its original factory calibration te Centros Manager amp eCal Validation Fle View Web Hep
35. s Manager can be used for the following e Updating the locators and transmitters with the latest software e Validating the locator with the original factory calibration using eCAL This feature provides the user with the ability to validate the original factory calibration of a locator eCAL provides the user with the confidence that the locator continues to meet its factory calibration and is safe to operate e Customizing the settings of the locator using Option Editor Centros Manager can now be used with the following product set e RD5000 e RD7000 e RD7000 e RD8000 e TX 1 e 1TX 3 e TX 10 NOTE Not all Centros features will be available for every product 1 1 About Centros Manager Software Update This utility allows the user to update the software of locators and transmitters Software updates are available to users who have registered for Radiodetection s extended warranty program eCAL eCAL allows the user to check that a locator is within its original factory calibration eCAL issues a pass or fail certificate which can be printed eCAL can also be used to retrieve and print the original calibration certificate To carry out eCAL the user must purchase an eCAL validation key and register for extended warranty For more information on how to purchase a key go to section 5 NOTE eCAL is not applicable to the transmitter Option Editor This utility allows you to customize your locator q
36. tralia Unit 14 5 7 Prosperity Parade Warriewood NSW 2102 Australia Tel 61 0 2 9979 8555 Fax 61 0 2 9979 7733 Email rd sales au spx com Web www radiodetection com To see the full range of products and services provided by Radiodetection visit www radiodetection com a Radiodetection AN SPX COMPANY Copyright 2010 Radiodetection Ltd SPX Corporation All rights reserved Radiodetection is a subsidiary of SPX Corporation SPX and Radiodetection are trademarks of Radiodetection Ltd and SPX Corporation Due to a policy of continued development we reserve the right to alter or amend any published specification without notice This document may not be copied reproduced transmitted modified or used in whole or in part without the prior written consent of Radiodetection Ltd 90 UG081ENG 06
37. tter Registration is free and entitles you to free software updates If you register within 3 months of purchase you will receive an extra 2 years warranty on both the locator and transmitter free of charge To register your locator or transmitter please go to www radiodetection com extendedwarranty Centros Manager Operation Manual 1 Section 2 Installing Centros Manager 2 1 Installing with Windows When you install Centros Manager onto a PC the following message may be displayed You need to log in as Administrator lf this message is displayed the installation of the program will not complete You will need to log on as an Administrator or ask a user with Administration Rights to install the program on your behalf Having successfully installed Centros Manager the Administrator will need to carry out the instructions in section 7 1 if they wish users without Administrator Rights to use Centros Manager 1 Centros Manager can be installed using the link from www radiodetection com centrosmanager 2 When you click on the link to download Centros Manager a File Download Window will appear and you will have a choice of either Run or Save It is recommended to install Centros Manager using the Run option The Save option can be used if you wish to download the executable file and make copies to transfer onto other PC s or Laptops 3 Run Centros Manager will automatically install 4 Save you will be given th
38. ty of metal objects Before starting eCAL ensure the following 1 The locator is in free space or on a non metallic surface 2 The locator is as far as possible from sources of electromagnetic interference such as computer monitors 3 The transmitter is switched off If eCAL fails repeat the procedure making sure that the locator is as far as possible from the computer and away from large metal objects There may be environments which are unsuitable for eCAL because of external interference If you suspect that the environment might have excessive electromagnetic interference try eCAL in a different location or at a different time when there is likely to be less interference If the locator still fails validation then you are advised to return it to your local Radiodetection service centre for calibration or repair Section 6 Option This section provides instructions on how to customize the settings of your locator using the Locator Option Editor within Centros Manager 6 1 Uploading your locator configuration t Centros Manager 6 Option Editor File View Web Help lt Important Messages Setting pa Ea p 9 Option Editor Toolbar 1 Home Page Will take you back to the Centros Manager Home Page Upload settings from locator Download settings to locator Stop upload download Load configuration from settings database Save configuration to settings data
39. u are the end user of Centros Manager and you have administrator rights on your own PC The following is intended for use by system administrators who are installing Centros Manager on behalf of users who have fewer rights than themselves 1 Install the USB driver by performing the following steps on each USB port a Connect locator to PC using a type A to mini B USB cable b Switch on locator c Follow on screen instructions on PC to install Atmel USB driver atm6124 sys If the USB Atmel Device is not detected and on screen instructions do not occur refer to Sections 7 2 and 7 3 of the Centros Manager User Guide This details how to manually select the correct Atmel USB driver atm6124 sys 7 2 USB Tips amp Tricks The locator Atmel Universal Serial Bus USB device is compliant with the USB V2 0 full speed 12 Megabits per second device specification If you are experiencing problems with the USB connectivity you can perform the following connectivity checks 1 Make sure the USB cable is connected between the PC and unit 2 Make sure the unit is switched on If the back light on the locator display does not light press the on off key 3 When the unit is switched on make sure the PC detects the USB device If the USB connection is successful Atmel Detected should be displayed in the message window If you are still experiencing problems you can perform the following actions 1 Reboot your co
40. uickly using your PC User configurations can be saved and recalled using this facility A configuration can be uploaded from a unit or downloaded to it 1 2 System requirements Microsoft Windows XP Professional 82 bit with Service Pack 3 Microsoft Windows Vista 32 bit with Service Pack 1 Microsoft Windows 7 32 bit with Service Pack 1 Please Note that Centros Manager does not currently support any 64 bit operating system at this time To find out the bit count of your Operating System on Windows 7 Click Start gt Settings gt Control Panel gt System and Security gt System and then locate System Type on the General tab For all other Windows operating systems follow the instructions at the following link http support microsoft com kb 827218 An active Internet connection is required to download Centros Manager and receive software update notification from Radiodetection 1 3 Before you begin Once Centros Manager is installed in order to download the latest software the user will need to register each locator and transmitter for the extended warranty program Upon registration the user will receive an email confirming warranty registration and also a unique electronic key which will be required for downloading new software for both the locator and transmitter Once registered Radiodetection will email you when there is a new version of software available for either the locator or transmi
41. us Tab e Message Help File Set the location of the message window HTML help file e Centros Operation Manual Sets the location of the Centros Manager Operation Manual e License Agreement Sets the location of the Centros Manager end user license agreement User Messages window The message window appears in the lower half of each window and will display Centros system messages It can also be used as a simple text editor and is useful for diagnosing problems and referring messages to Radiodetection Technical Support Message toolbar New Clear Message Window Contents Open txt file in message window Save message window contents to txt file Cut selected area to clipboard Copy selected area to clipboard Paste clipboard contents to message window Select all text in the window a ee te a i Undo the last change Redo the last undone change O Insert Timestamp h h Turn Word Wrap on or off N Email message window contents to Radiodetection alk se Open help on message window 4 Centros Manager Operation Manual Section 3 Locator software update From time to time Radiodetection will release new software for their locators to enhance features and improve performance All the latest software updates are supplied within Centros Manager To obtain the latest Centros Manager refer to section 2 You can check the latest version of Ce
Download Pdf Manuals
Related Search