MC14 - Induro
Contents
1. SETUP Before using your monopod adjust the leg section to the desired height Ensure that the monopod is firmly resting on a level surface and mount your camera securely on the monopod or a support head Always engage any safety locks on the support head to prevent any accidental dismounting Leg Section Adjustment See figure 1 The monopod leg sections can be independently adjust to the desired length by turning the proper leg lock grip counter clockwise until the leg is free to slide in or out Once the desire length is achieved turn the leg lock grip clock wise until the leg section is securely locked Repeat this step for each section until the monopod is set to the desired height Please note To prevent any accidental damage to your gear always remove any mounted equipment camera etc from the monopod before adjusting the leg sections Reversible 3 8 or 20 mounting screw See figure 2 Your Induro monopod incorporates a reversible mounting screw that accommodates any tripod head mounting thread 3 8 or 20 The monopod is factory shipped with in the 20 mounting thread exposed If it becomes necessary to reverse the mounting screw to the 3 8 side loosen the locking nut counter clockwise using the included wrench until it becomes loose and unscrew the mounting screw until it can be completely removed Reverse the screw so that the 3 8 threads are in position and screw it back into plac2. IN gt a my OPERATING INSTRUCTION CARBON 8X MC AND MCX SERIES MONOPODS ALLOY 6M MA AND MXA SERIES MONOPODS Thank you for making Induro your choice for professional photographic gear Before using this equipment please read these instructions for proper use and the best performance FEATURES Induro Monopods are available in two categories and four collections Aluminum Alloy Monopods Alloy 6M MA Series The INDURO Alloy 6M MA Series monopods are made from high quality aluminum alloy and precisely machined to offer the quality and strength demanded by professionals The monopod leg sections are extruded 6000 series Aluminum with a wall thickness of 1 5mm The leg lock has a specially designed anti dust and moisture seal along with a foam grip and wrist strap Alloy 6M MXA Series The INDURO ALLOY 6M MXA Series aluminum monopods are made from high quality aluminum alloy and precisely machined to offer the quality and strength demanded by professionals The monopod leg is extruded 6000 series Aluminum with a wall thickness of 1 5mm The leg lock has a specially design anti dust and moisture seal along with a foam grip and wrist strap The MXA series also features a fold out tripod for added support and stability during prolonged shooting scenarios Carbon Fiber Monopods Carbon 8X MC Series The induro carbon 8x MC series carbon fiber monopods offers the ultimate in strength light weight fast action and reliable perfo
3. CE Your Induro Monopod has been designed for years of maintenance free use Please follow the guidelines below to ensure the best performance reliability and durability expected from Induro Gear 1 2 3 Always clean and dry the monopod after it has been exposed to wet dusty sandy Do not exceed the maximum specified load capacity see product specification chart Always ensure that leg locks are tightly engaged before mounting a camera on the monopod Do not use the monopod below temperatures of 4 or above 158 F 20 C 70 C or salty conditions Your monopod is not recommended for use in salt water Clean the monopod with a mild soap and soft cloth Remove any dust dirt or sand from the leg locks leg lock threads leg sections and all moving parts Do not leave the monopod in the sun for prolonged periods and avoid high temperature exposure for example in the trunk of a car or exposed to sun behind a glass window for hours Avoid leaving the monopod unattended in areas where people could trip over it and get hurt It is recommended that any equipment camera s etc be removed from the monopod when transporting it For you safety don t let your Induro tripod come in contact with any electrical power source Do not carry the monopod on your shoulder when a camera lens or equipment is mounted Failure to follow these instruction can result is significant damage to the equipment
4. assembly back into the lower section of the monopod To retract the legs reverse the procedure Please Note Do not leave the monopod free standing especially with a camera lens or any equipment mounted The retractable feet are for hand held monopod support and should never be used as a light stand or freestanding support under any condition INDURO Camera Support Gear 8 Westchester Plaza Elmsford NY 10523 Phone 914 347 3300 Fax 914 347 3309 E mail info indurogear com www indurogear com 499 904
5. e secure with the locking nut and wrench Please note Allow enough of the screw threads to be available for maximum security when the tripod head is mounted onto the monopod It s recommended that at least 5 to 6 threads be exposed for before locking the mounting screw in place Mounting plate set screws See figure 3 Some tripod head manufacturers require additional mounting security and provide openings on the bottom of the tripod mounting plate to accommodate setscrews Your Induro monopod includes setscrews to securely mount these types of tripod heads Once the tripod head is screwed onto the center mounting screw 3 8 or 20 tighten each of the three setscrews with the provided Allen wrench until there are tightly secured Anti Twist Leg Sections For quick and easy setup the leg section excluding the last section incorporates a key and groove within the leg to prevent the leg from rotating Retractable Feet See figure 4 For additional support during prolonged shooting events the MXA and MCX series monopods incorporate retractable tripod feet They provides additional support and stability wnen needed and retract back into the lower section of the monopod when not needed To configure the monopod with the support feet in place turn the bottom rubber foot counter clockwise until the foot can be removed Pull the support feet out of the leg section Allow each of the legs to fall into the proper slots and screw the
6. rmance They are made of the latest generation of high quality 8 layer carbon fiber tubing The MC Series is 60 stronger overall than conventional carbon fiber monopods The monopod leg lock has a specially design anti dust and moisture seal along with a foam grip and wrist strap CarbonFlex 8X MCX Series The induro carbon 8x MCX series carbon fiber monopods are made of the latest generation of high quality 8 layer carbon fiber tubing The MCX Series monopods are 60 stronger than conventional carbon fiber monopods The leg lock has a specially designed anti dust and moisture seal along with a foam grip and wrist strap The MCx series also features a fold out tripod for added support and stability during prolonged shooting scenarios Identifying monopod model numbers Monopod model numbe Example Prefix lt Monopod type Prefix lt Carbon Fiber leg Material 1 Digit lt 25mm leg diameter 2 Digit lt 4 Sections MC14 1 Digit Leg Diameter 2nd Digit Number of leg sections Letter Special Feature Prefix Leg Material M Monopod X Retractable Tripod Feet Aluminum 3 3 Sections A Aluminum 1 24mm 4 4 Sections C Carbon Fiber 1 28mm 5 5 Sections 2 32mm 3 36mm Carbon Fiber 0 25mm 1 28mm 2 32mm 3 36mm MONOPOD OPERATION lock nut 1 4 20 3 8 i mounting screw wrench USER NOTI
Download Pdf Manuals
Related Search