Home

IMS1000 User Manuals

1. Figure 106 Events Window e Toconnect the selected Trigger Cue to a GPI event click the General Purpose Input option and click the Add button Figure 106 e The following window will appear Figure 107 General Purpose Input Line Number 0 Value OFF Figure 107 General Purpose Input Setup Window e Define the GPI line number and value to connect to the Trigger Cue and click the Ok button e The connected GPI event will then appear in the right part of the GUI Figure 108 IMS OM 002949 DRM Page 106 of 196 Version 1 2 Doremi Labs a Screen M S 1 0 0 0 Software Version 2 4 340 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT D New 2 Delete ei Settings WW Device Manager z o gt Trigger Test Automation Cue E Content Feed Manager f Terminal 0 System fell Control Panel General Purpose Input Le Figure 108 GPI Event Added 12 6 4 Connection to a Signal Event e Click on the Trigger Cue that you want to assign the Signal event to e Click the Connect to an Event button from Macro Editor s Trigger Cue tab The Connect to an Event drop down window will appear Figure 106 e Click the Signal button and Click Add The Signal Setup window will appear Figure 109 Signal Setup Source device name Any Signal name Select from list Driver Certainty Signal Figure 109 Signal Event Setup Window IMS OM 002949 DRM
2. Figure 70 Audio Mapping Window Disabled Default Setting e When first launched the Audio Configuration application opens in the Channel Mapping tab The Template Mapping will be set to Disabled Figure 70 Note All the templates except Disabled can be modified directly instead of having to select Custom Once the template is edited the Template Mapping will read Custom Available configurations include Disabled This setting is the default and as such cannot be mapped 4 channels This is a pre set configuration 6 channels This is a pre set configuration 7 channels This is a pre set configuration 8 channels This is a pre set configuration 9 channels This is a pre set configuration IMS OM 002949 DRM Page 75 of 196 Version 1 2 Doremi Labs e ISDCF This is a pre set configuration e Custom This setting allows the user to create their own custom audio configuration To make any changes to the audio configuration SuperUser privileges are necessary The Data checkbox is used to indicate on the AES output that a channel is not an audible audio content but a data content This can be used to mute the speaker if such content is received because it is just noise Figure 70 12 2 Channel Mapping Tab 12 2 1 Disabled Configuration Disabled This setting is the default and as such cannot be mapped The Disabled mapping configuration will perform pass through mapping meaning channel number X of the CPL audio t
3. w Wm Figure 97 Playback Actions Setup Window IMS OM 002949 DRM Page 99 of 196 Version 1 2 Doremi Labs e Select the proper playback action between Play Pause Toggle Play Pause or Re cue Show and click the Ok button 12 5 6 Video Output Action Insertion e To adda Video Output Actions highlight the desired Macro Cue e Select the Video Output Actions option which is located in the Playback section in the Select an Action to Insert drop down menu Figure 95 e Click the Insert button e The following window will appear Figure 98 Video Output Actions Choose the action Default video output Figure 98 Video Output Set Up Window 12 5 7 Dowser Action Insertion e To adda Dowser Action highlight the desired Macro Cue e Select the Dowser Action option which is located in the Projector section in the Select an Action to Insert drop down menu Figure 95 e Click the Insert button e The following window will appear Figure 99 Dowser Settings Projector All Name Value Close dowser Figure 99 Add a New Action Window Dowser 12 5 8 Projector Channel Switch Insertion e To adda Projector Channel Switch Action highlight the desired Macro Cue e Select the Projector Channel Switch Action option which is located in the Projector section in the Select an Action to Insert drop down menu Figure 95 e Click the Insert button e The following window will appear Figure 100 IMS OM 00294
4. Hardware Base board MediaBlock Log Download Clock System clock Secured clock Timezone UTC Offset Next DCT change OVERVIEW ADMINISTRATION Thu Mar 28 2013 15 17 22 358s 1800s America Los_Angeles 420 minutes Sun Nov 3 01 59 59 2013 PDT CONTROL Networking IP Address efh0 IP Address eth Versions Firmware version Software version SM Version Watermark WebUl version MONITORING 10 11 26 62 192 168 100 50 Figure 181 System Tab e The GUI presented is composed of four different tabs o System Provides overall information concerning the system itself o Storage Provides information concerning the storage and allows the user to repair reinitialize and replace a drive o Hardware Provides information related to the hardware ims 1000 net 2 4 3 0 Projection LOGOUT o Media Block Provides information on issues relating to the media block IMS OM 002949 DRM Page 168 of 196 Doremi Labs Version 1 2 14 2 System Tab The System tab provides general information related to the server such as Serial Number Software Firmware Version numbers IP addresses Product Name Base Board Watermark Security Manager Version System Clock Secured Clock Timezone UTC Offset and the date of the Next DCT Change The System tab also displays the status of the playback and the Composition Playlist UUID e The System tab is illustrated below Figure 182 Detailed S 0 re M
5. M S 1 0 0 0 Screen ims 1000 net Software Version 2 4 3 0 Re port Serial Number 199000 User Level Projection B u tto n Sys OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT P O C Chassis Networking Storage Product name IP Address eth0 10 11 26 62 Serial number IP Address eth 192 168 100 50 Hardware Base board MediaBlock Log Download Clock Versions System clock Thu Mar 28 2013 15 17 22 Firmware version Secured clock 358s 1800s Software version Timezone America Los_Angeles SM Version UTC Offset 420 minutes Watermark Next DCT change Sun Nov 3 01 59 59 2013 PDT WebUl version Pause um uuid 98781194 c4bc 3042 9b08 e81bd1ee3557 Figure 182 System Tab 14 2 1 Detailed Report Overview To generate a report log please follow the steps below Note If possible generate the report log when there is no playback e Gotothe Monitoring Tab e Click on the Detailed Report button Figure 182 e Click the OK button Figure 183 Generating the report file may take several minutes Are you sure you want to proceed Figure 183 Generate Report IMS OM 002949 DRM Page 169 of 196 Version 1 2 Doremi Labs e The report will take several minutes to generate e When the generation is complete a window will appear asking the user if they would like to open or save the report Figure 184 Make your selection and click Ok The report is saved on the computer s default downloads folder You have chos
6. Black 3D S Black3D 48 Trigger Cues Fire Trigger Test Start Time Elements Figure 134 Element Re Ordering Note When an element is associated with an automation or trigger cue the cues will also be re ordered 13 3 2 1 Refresh Button Anytime new content and a package are ingested into the server the items will not be displayed automatically in the CineLister GUI if CineLister is already running Click on the Refresh Contents button from the Editor tab Figure 134 to see an updated version of all available items that have been ingested 13 3 2 2 Save Button lt is very important to click the Save button when done completing any task to save especially a SPL Figure 132 If the user does not click the Save button the changes will not be reflected IMS OM 002949 DRM Page 128 of 196 Version 1 2 Doremi Labs 13 4 Accessing a Show Playlist e To open an existing Show Playlist click on the Open button from the CineLister Editor tab Figure 134 e Anew window will appear allowing the user to select the desired SPL Figure 135 Show Playlist available on the server Stem and Serenity Test Figure 135 Open SPL e Select the desired SPL and click the Ok button The Show Playlist will be displayed on the right side of the GUI 13 4 1 Editing an Existing Show Playlist Click on the Open button in the CineLister Editor tab Figure 134 The user will be prompted to the SPLs Available on Server window Figure 135
7. Ch 15 is HI Output ch 15 will be playing the CPL s Hearing Impaired HI audio channel Ch 16 is VI Output ch 16 will be playing the CPL s Narration VI audio channel IMS OM 002949 DRM Page 77 of 196 Version 1 2 Doremi Labs RB Screen IMS1000 domain net M S 1 0 00 Software Version 2 43 0 Serial Number 199000 User Level Projection Template Mapping 6 channels ZA Macro Editor Content Feed Manager Terminal R Right Io oystem a m a OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Y Device Manager Channel Label Channel Label ULeft ch 09 Mute ch10 Mute CiCenter chit Mute LFE Screen chi2 Mute Ls Left surround chi3 Mute Rs Right surround ch14 Mute Mute Chip Hi Hearing impaired ch 08 Mute ch16 VI N Narration Figure 73 Audio Mapping Set to Six Channels 12 2 2 3 Seven Channels This configuration is defined as follows Figure 74 Ch 01 is Left L Output ch 01 will be playing the CPL s Left L audio channel Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel Ch 04 is LFE Screen Sub Woofer Output ch 04 will be playing the CPL s FE Screen Sub Woofer audio channel Ch 05 is Left Surround Ls Output ch 05 will be playing the CPL s Left Surround Ls audio channel Ch 06 is Right Surround Rs Output ch 06 will be playing the CPL s Right Surround Rs audi
8. 13 6 4 Adjusting the Default Values Support for this feature is forthcoming This feature will allow the user to change the fast forward and rewind amount to their desired settings 13 6 5 Playback Lock Mode The Mode button can be used to determine manual or schedule mode Figure 147 ocreen ims 1000 net M S 1 0 0 0 Software Version 2 4 3 0 serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT An Manual Editor Schedule StEM DCI Chinese subtitles StEM_DCI Chinese subtitles Black Ingest Manager Black 3D remaining 00 08 45 Content Manager Device Controller ef Macro Execution remaining 00 08 47 r a N Mode Play then Eject Figure 147 Playback Lock Mode IMS OM 002949 DRM Page 137 of 196 Version 1 2 Doremi Labs 13 6 6 Playback Alert Messages CineLister displays alert messages in the Playback tab Currently there are two alerts available 1 Projector communication failure o This message is displayed when there is no projector configured or if the server is not connected to the primary configured projector 2 Storage is degraded o This message is displayed if at least one of the available RAID storages is degraded or faulty For example RAID md0 or RAID md1 IMS OM 002949 DRM Page 138 of 196 Version 1 2 Doremi Labs 13 7 CineLister Schedule Tab The Schedule tab allows the user to schedule the playback of Show Playlist s on a certain
9. Mount point Array size Array used disk space RAID status healthy degraded rebuilding failed To analyze or repair a RAID click on the Analyze or Repair buttons e Analyze To analyze a RAID performance and to free disk space An icon to show RAID status green healthy amber degraded rebuild red missing e Repair To repair a degraded RAID It attempts to sync a highlighted RAID that is currently not part of the RAID e Manage To disable a possible faulty drive IMS OM 002949 DRM Page 171 of 196 Doremi Labs Version 1 2 14 3 1 1 Analyze Support for this feature is forthcoming The Analyze feature will be used to check if the performance of a RAID is enough to support playback without underflowing 14 3 1 2 Disk Cleanup Support for this feature is forthcoming The Disk Cleanup feature will allow the user to delete files that are not being used or not needed anymore The user will access the Disk Cleanup feature from the Storage tab 14 3 1 3 Repair Support for the Repair feature is forthcoming 14 3 1 4 Reinitialize a RAID Support is forthcoming for this feature The purpose of reinitializing a RAID will be to reformat due to corrupted file systems 14 4 Drive Replacement This section presents the procedure to apply when a drive needs to be replaced 14 4 1 Degraded Drive e The Storage tab will display the failed drive in the Disk sub view telling the user that the drive needs to be repl
10. Select the SPL and click Ok The SPL s content will be displayed on the right side of the GUI Figure 136 IMS OM 002949 DRM Page 129 of 196 Version 1 2 Doremi Labs Properties Button d rem IMS1 000 zech Version o gt Delete Serial Number 199000 User Level Pret Button OVERVIEW ADMINISTRATION CONTROL MONITORING uGOUT e 7 Refresh mul New Open eng Ki Properties x Delete Playback all elements A e ops Stem and Serenity 2D Schedule are 00 00 00 Serenity Full Movie v3 Ingest Manager Ee 01 58 55 StEM_DCI Chinese subtitles Content Manager Pause a Pro perties Device Controller Icon ZA Macro Execution E Start Time Elements Figure 136 SPL Opened Re order the elements within the SPL by using the up and down arrows Figure 134 Remove elements by selecting them and then clicking the X button To edit the settings of an Automation or Trigger cue click on it Figure 132 To view the properties of a particular CPL highlight the CPL and click on the Properties icon that appears on the right Figure 136 13 4 2 Deleting a Show Playlist Open the desired SPL Once the SPL is opened delete it by clicking on the Delete button Figure 136 A password will be needed to complete this operation SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear The Delete window will appear Figure 137 IMS OM 002949
11. orca_wrapping 3 4 1 2 Edit rate 241 Issuer Doremi Labs Inc Sound Picture Channel count Encoding JPEG2000 Quantization bits Dimension 2048x1080 Encoding Figure 157 CPL Information Window Properties Tab 13 9 2 3 2 Assets Tab e The Assets tab Figure 158 displays information on all the Reels that compose the CPL and the Assets in each Reel Reel number subtitle and sound IMS OM 002949 DRM Page 148 of 196 Version 1 2 Doremi Labs CPL Information Properties Assets SPL s KDM s Reel 1 gt MainPicture 9540b81e 4d42 ba4c 89ea 038d113c5c73 b MainSound 27fb315c c3f8 45dc 8277 21cf912d4ad3 gt MainSubtitle c22ca6ad 44e4 4eb1 bb2b 5808a64e519b Reel 2 gt MainPicture 79c5bd79 7d11 a842 988f 76f4feael3cd P MainSound 3d71a6d9 26ad 4196 93f0 8cdd94404f63 Reel 3 gt MainPicture 6efb90bb b933 474a 8857 9d0494194d68 gt MainSound 688a5fcc 9026 4b14 9bd3 5a0bc74604f3 Reel 4 gt MainPicture 21b984b3 8d69 084e bf70 c43fe22ee9f9 gt MainSound cbSef9fd a49a 48d2 9ead ad5e2a074f99 ee A 3 Figure 158 CPL Information Window Assets Tab 13 9 2 3 3 SPL s Tab e The SPL s tab displays information related to all of the Show Playlists that contain the selected CPL Figure 159 e The SPL information window will appear Each SPL in this list contains the CPL that information is sought for e Select the desired SPL from the Name column and click on it This will open the SPL information window Propertie
12. which contain the required decryption keys allowing playback of the corresponding CPLs 13 8 1 2 Ingesting Content From A USB Drive If the content to ingest is on a USB drive plug the drive into the IMS1000 s USB Port and go to the Ingest Manager From the drop down window select Local Storage and hit the Refresh button e Select an item e Click on the Ingest button Figure 150 The ingest process will begin e H an item was already ingested it will appear in gray KI ocreen IMS1000 M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Ingest D Refresh Ln ngested e Local Storage D zu element E P ngest l te m localhost scanned about 0 minute ago Ingest Monitor oS Upload CD Treasure Planet 2k Content Manager eh Treasure Planet 2K Non Enc Device Controller Doremi Ret Test Sch 96Khz_ENC Macro Execution Figure 151 USB Ingest Note lt is possible to playback ingested content while ingesting other content e The user will be prompted to the Ingest Monitor tab to view the progress of the ingest 13 8 1 3 Ingesting Content from a Remote Doremi Server LMS Use a File Transfer Protocol FTP connection to ingest an item from a central server or a cinema server over a network 13 8 1 4 Ingesting Content From a Doremi Remote Server LMS e Click on the drop down menu from the Location menu Figure 150 IMS OM 002949 DR
13. 0 0 Software Version 24 340 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT SP Device Manager ZA Macro Editor Content Feed Manager Current Date Tue 26 March 2013 Current Time 11 28 12 P Terminal 10 System A MEAN TS y Update Update _ C S Button SI Er Timezone America Los_Angeles Le Update America indiana Knox Americallndiana Marengo America indiana Peters burg America indiana Tell_ City America indiana Vevay America indiana Vincennes America indiana Winamac America Indianapolis America Inuvik America iqaluit America Jamaica America Jujuy America Juneau America Kentucky Louisville America Kentucky Monticello America Knox_IN America Kralendijk America La_Paz America Lima Figure 55 TimeZone Drop Down Window e Select the time zone that best represents the geographical area in which the IMS1000 is installed e Once the appropriate timezone has been selected and appears within the box labeled Timezone click the Update button to save this setting e SuperUser privileges are necessary to save the change Note This is the preferred method of changing the time zone 8 3 Changing the System Time To modify the IMS1000 system clock RTC Real Time Clock follow the steps below Note DCI specification allows the user to only modify the time up to 6 minutes per calendar year IMS OM 002949 DRM Page 60 of 196 Version 1 2 Dore
14. 002949 DRM Page 20 of 196 Version 1 2 Doremi Labs 3 3 MPEG2 H264 VC1 MXF Interop 720p 60 fps 10801 1080p up to 30 fps Bitrates up 5OMBits s 4 2 0 8bits Video processing features Color conversion support YCbCr601 YCbCr709 RGB rec709 XYZ and YCxCz De Interlacing Scaler upscale up to 4K To be released Q3 2013 Security Doremi Forensic Watermarking for audio and video FIPS 140 2 Level 3 Security certified Audio 16 channels AES EBU 24bits up to 96KHz Alternative Content HDMI input See Annex D for the list of supported formats HDSDI 1 5 Gbit Support Dual 3GSDI support is forthcoming Q3 2013 Live content network input Alternative audio routing using HDMI audio SDI embedded audio and live input Pre Loaded Test Content Used for testing playback when hard drives are not installed See Section 15 2 for more information Input Output Ports 2x Gigabit Ethernet RJ45 Eth0 is full speed Eth1 is max 500mbit s 1x eSATA 3GBit s 3x USB 2 0 1x HDMI input 2x 3GSDI bidirectional input and output support is forthcoming Q3 2013 8x AES pair using 2x RJ45 4x GPI ports 1x RJ45 6x GPO ports 1x RJ45 Environmental Specifications Temperature Range Ambient Operating 10C to 40C or 50F to 104F IMS OM 002949 DRM Page 21 of 196 Version 1 2 Doremi Labs e Non operating 20C to 60C or 4F to 140F 3 4 Performance Storage Power e The IMS1000 uses 3 x 11B HDDs
15. 002949 DRM Page 36 of 196 Version 1 2 Doremi Labs 4 7 Power on Projector e Connect AC power to the projector Figure 25 Figure 25 AC Power e Turn the projector on The expected boot up time is about 2 30 minutes Figure 26 Please refer to the projector manufacturer manual for proper power up sequence Figure 26 Power Switch e To access the IMS1000 GUI Graphical User Interface launch your browser on the computer that is connected and enter the IP address into the browsers window You will be presented with the Doremi IMS1000 Login screen e Enter Username doremi e Enter Password dorem e Click the Login button To complete the marriage refer to Section 9 IMS OM 002949 DRM Page 37 of 196 Version 1 2 Doremi Labs 4 8 Shut Down In order to properly shutdown the IMS1000 board and the NEC projector the user must follow the steps below e To shut down the board go to Administration System Figure 27 ims1000 1 ims 1000 domain net N S 1 0 0 0 Software Version 24 340 Serial Number 199000 User Leve SuperUser Shutdown p Butto n OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT SP Device Manay e To restart the system click the Restart button You will be automatically disconnected from the web interface Lei Macro Editor To shutdown the system click the shutdown button Viacro E y Content Feed Manager KW Terminal d m Control Panel Figure 27 Shut Down e Click on the Shutdown
16. 196 Version 1 2 Doremi Labs B 1 Screen IMS1000 domain net P ro e cto r q 0 re M Vi S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 Projection Selected User Level OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT AD 2 New Delete Device Manager PROJECTOR ZA Macro Editor Content Feed Manager F Terminal 0 System Figure 59 Add Projector Drop Down e Populate the projector parameters that appear Figure 60 doremi New 2 Delete SP Device Manager Screen IMS1000 domain net M S 1 0 0 0 Software Version 24 340 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING of Macro Editor Closed Caption CDevice Type Projector Enabled iP Fore ina 318 gt Gand My Subt E Content Feed Manager Subtitle Engine Verger Projector E Terminal Projector model Unknown D sUnknown y 0 System DLP Head IP fil Vendor IP Username Password Enable subtitles Yes No Primary projector Yes No Save Button Figure 60 Projector Added e Click the Save button Once the device has been configured in the Device Manager go to Administration Control Panel Marriage Tool Figure 61 IMS OM 002949 DRM Page 65 of 196 Version 1 2 Doremi Labs El Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 ker Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Y
17. 2 Doremi Labs 13 9 7 Licenses Available Managed Through Doremi License Control DLM Doremi Doremi Streamlt license Doremi Doremi Deghost Not available yet IMS OM 002949 DRM Page 158 of 196 Version 1 2 Doremi Labs 13 10 Device Controller 13 10 1 How to Configure the Device Controller GUI e To open the Device Controller application go to Control Device Controller e The following Device Controller window will appear Figure 172 doremi Screen IMS1000 M S1 000 Software Version 24 30 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT A Browse Projectors Browse Q CineLister i S Ingest Manager P FO ecto rs o e This application can be used to monitor or control external devices B utto n Content Manager e To select the device to control click on Browse Projectors Zi Macro Execution Registered Manual Name Type Certainty Certainty Figure 172 Device Controller e To view existing projectors click on the Browse Projector button Figure 172 The following window will appear Figure 173 Projector List IMS IMS 1000 Figure 173 Browse Projector Window IMS OM 002949 DRM Page 159 of 196 Version 1 2 Doremi Labs 13 10 2 Registered Tab e If the device was previously created registered in the Device Manager GUI then it will automatically appear in the Registered tab of the Device Controller GUI e An IMB or Sony SRX Project
18. 2 5 providing 2TB of media storage e Raid 5 storage is hardware based e The IMS1000 supports up to 4K 60fps and 2K HER up to 120 fps e The IMS1000 supports 500 Mbits s playback e Battery IMS1000 battery is a Panasonic Vanadium rechargeable lithium battery VL3032 e Power lt 70W Power input 12V 6 25A from projector main LVDS connector 3 5 IMS1000 e An 1IMS1000 is shown below Figure 1 Figure 1 IMS1000 3 6 IMS1000 Faceplate Overview Figure 2 IMS1000 with NEC Faceplate IMS OM 002949 DRM Page 22 of 196 Version 1 2 Doremi Labs Figure 3 IMS1000 with Barco Faceplate Ethernet e The IMS1000 has two built in Gigabit Ethernet connectors The left one is identified as ETH1 and the right one is identified as ETHO eSATA e Used for ingesting content at four times the maximum transfer rate of USB 2 0 USB e There are three USB 2 0 ports on the front panel that can accommodate an external USB device such as the CaptiView transmitter or USB external drive for content ingestion HDMI e Tobe used for inputting of alternative content e Blu ray Disc player Gaming Digital Cameras or Laptop presentations e HDCP High bandwidth Digital Content Protection supported SDI A SDI B 3G SDI support is forthcoming Q3 2013 Used for Dual Projector setups Chase Mode Alternative Content Inputs GPI General Purpose Input for Automation Interface e RJ 45 Connector IMS OM 002949 DRM Page 23 of 196 Vers
19. 2D 720p 50 59 94 60 1080p 23 98 24 25 29 97 30 1080sf 23 98 24 10801 25 29 97 30 2kp 23 98 24 2ksf 23 98 24 O O O OOO Dual Link e 2D 720p 50 59 94 60 1080p 23 98 24 25 29 97 30 1080sf 23 98 24 10801 25 29 97 30 2kp 23 98 24 2ksf 23 98 24 O O O 0 0 Dual Stream e 3D 1080p 23 98 24 25 29 97 30 1080sf 23 98 24 1080i 25 29 97 30 2kp 23 98 24 2ksf 23 98 24 O O O 00 20 2 Audio e SDI Embedded Audio 48 KHz IMS OM 002949 DRM Page 190 of 196 Doremi Labs Version 1 2 This page has been intentionally left blank IMS OM 002949 DRM Page 191 of 196 Version 1 2 Doremi Labs 21 Appendix F Connection Diagram dore mM DET Auditorium Set Up IMS1000 HDD 3 S N Sticker a HDMI SDI A SDI B Management Network Switch Digital Audio Processor Computer General Purpose UE ESA Input Output Automation DLP Series 2 Interface Projector TMS LMS JE Media Network Switch Computer Auditorium f Auditorium f Auditorium f Auditorium f Auditorium f Auditorium Theater Complex Set Up For a stand alone system Not required if an external computer is used in a theater management system Doremi Labs 1020 Chestnut Street Burbank CA 91506 USA doremilabs com IMS OM 002949 DRM Page 192 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 193 of 196 Version 1 2
20. 30 Empty Media Block Slot e Carefully remove the IMS1000 from its carton and antistatic bag e Gently place the IMS1000 board into the projectors media block slot guiderails on the inside of the slot Figure 30 e Tighten the two screws in place Figure 31 IMS OM 002949 DRM Page 41 of 196 Doremi Labs Version 1 2 Two Screws Figure 31 Tightening the Screws 5 2 HDDs e HDDs are to be shipped out of their chassis Upon initial installation insert them into the IMS1000 HDDs Chassis Carrier prior to powering up the projector e Do not insert or remove HDDs if the unit is powered on e HDDs are to be of the same make and model and have the same capacity e Doremi prohibits mixing SATA drives with SATA II drives within the same RAID e Each one of the three HDDs that come with the IMS1000 will be labeled with either a 1 2 or ue Sp e The HDD labeled 1 is to be inserted into the left hand HDD slot labeled HDD 1 on the IMS1000 e The HDD labeled 2 is to be inserted into the middle HDD slot labeled HDD 2 on the IMS1000 e The HDD labeled 3 is to be inserted into the right hand HDD slot labeled HDD 3 on the IMS1000 e Each HDD has a silver latch mechanism that allows for unlatching of the drive from the hard drive cage Figure 32 Silver Release Lever EA Ey Figure 32 Silver Latch on HDD IMS OM 002949 DRM Page 42 of 196 Version 1 2 Doremi Labs For each HDD press on the silver release
21. Click on the SPL to remove it in the Schedule window lt will become highlighted then click on the Delete button Figure 148 The appropriate password will be needed for the password authentication window that will pop up SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear 13 7 6 Playback Recovery Due to Power Failure e lf a power failure occurs during a scheduled playback then playback recovery will be possible after having powered the unit back on 13 7 6 1 How to Recover Playback e When powering the unit back on after an unexpected power failure the user will need to login again e After logging in CineLister will resume playback three minutes before the power failure occurred Note Cinelister will resume playback at the default amount of 180 seconds prior to power failure This amount will be different if the settings have been changed by the user 13 7 6 2 Shutting Down During Playback When there is a playback in progress and the user tries to shut down the server they will be prompted to a confirmation window If they select yes the server will shut down in five seconds and playback will stop Note Playback will resume when the unit is turned back on IMS OM 002949 DRM Page 141 of 196 Version 1 2 Doremi Labs Ingest Button Refresh Button Location Menu 13 8 Ingest Manager The Ingest
22. DB25 Converter IMS OM 002949 DRM Page 44 of 196 Version 1 2 Doremi Labs 5 4 GPI GPO Cables Installation _GPle e GPO 1 8 9 16 rermresereto gt gt gt Figure 37 GPI GPO Connectors e Plug one shielded CAT5 or CAT6 cable end into the connector labeled GPI on the IMS1000 board Figure 37 e Plug the other end of the shielded CAT5 or CAT6 cable into whichever automation controller is available or required e Take another shielded CAT5 or CAT6 cable and plug the end into the IMS1000 connector labeled GPO Figure 37 e Plug the other end of the shielded CAT5 or CAT6 cable into whichever automation controller is available or required 5 4 1 GPIGPO Pin Out Information Figure 38 RJ45 Socket Pin Out IMS OM 002949 DRM Page 45 of 196 Version 1 2 Doremi Labs 9 0 Cinema Controller Slot Ethernet Connector Ethernet Cables Connect an Ethernet cable from the LAN connector on the Barco projector s cinema controller slot and the other end of the cable to either a laptop or network switch Figure 39 ee PAR 18 e916 LAN Connector 0 12 34 SDI B UE A y TD O l GENERAL PURPOSE 1 0 Figure 39 Ethernet Connections Note Ethernet port Eth0 is set to DHCP by default All IMS1000 boards are shipped from the factory with the following default IP address for Eth1 o IP 192 168 100 50 o SM 255 255 255 0 o GW 192 168 100 1 Connect an Ethernet cable from the Ethernet connector on the
23. GUI go to Administration Control Panel Account Manager e The following window will appear Figure 118 al Screen ims1000 1 ims 1000 domain net M S 1 000 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT de New de Delete New Bn Macro Editor PE ss Button e c SuperUsers E Content Feed Man S F Tama doremi Projectionists ai Sy stem ingest Projectionists D e ete m ontrol Pane ingestkdm Ingests B u tto n manager So ShowManagers root Administrators Figure 118 Account Manager GUI e The Account Manager GUI allows the user to edit add and delete user accounts 12 10 1 Add a New User Account e o add a new user account click the Add button Figure 118 e The following window will appear Figure 119 Add User Login Test Full Name Test Group Inactives Login Type Virtual Password Confirm Figure 119 Account Manager GUI New User Addition IMS OM 002949 DRM Page 116 of 196 Version 1 2 Doremi Labs e Enter the username to be used for login in the upper empty field and the associated full name used to describe the user Both names will be displayed in the window after the new user addition is completed e Select the proper privileges They are listed below from the lowest level to the highest level of privileges Figure 120 o Inactive This user does not have any privileges o I
24. HI audio channel Ch 16 is VI Output ch 16 will be playing the CPL s Narration VI audio channel D Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection Template Mapping A channels Macro Editor Content Feed Manager Terminal ch 02 R Right 10 System e m ontrol Pa C Center OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT SP Device Manager Channel Label Channel Label ch 01 ULeft Mute Mute Mute Mute Mute S Surround Mute Mute Mute Mute Hi Hearing impaired Mute VI N Narration Figure 72 Audio Mapping Set to Four Channels 12 2 2 2 Six Channels This configuration is defined as follows Figure 73 Ch 01 is Left L Output ch 01 will be playing the CPL s Left L audio channel Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel Ch 04 is LFE Screen Sub Woofer Output ch 04 will be playing the CPL s LFE Screen Sub Woofer audio channel Ch 05 is Left Surround Ls Output ch 05 will be playing the CPL s Left Surround Ls audio channel Ch 06 is Right Surround Rs Output ch 06 will be playing the CPL s Right Surround Rs audio channel Ch 07 Ch 14 These channels are pass through meaning the output channel X will be playing the CPL s audio channel X X will be a value between 7 and 14
25. IP address IP address 192 168 100 50 System O sy Netmask Netmask 255 255 255 0 Gateway Gateway 192 168 100 1 Save Button Reset Button Figure 51 Networking Configuration Window e The Networking Configuration window will appear You will need to populate the following fields o Hostname Note It is a good idea to input the circuit location screen number in here For example DoremiScreen 1 as it will be easier to identify in the logs o Properties of both ethO amp eth1 m IP Address e Note Do not put leading zeros 0 in front of any numbers For example do not input 192 168 100 050 m Netmask m Gateway IMS OM 002949 DRM Page 55 of 196 Version 1 2 Doremi Labs Note You can use the tick box for either of these to obtain an IP address automatically with DHCP e Select the Save button to keep these settings e You will be prompted to key in a password to keep these settings See your system administrator for this password SuperUser privileges are necessary to be able to confirm the changes If the user is already logged in with SuperUser privileges a password window will not appear e To verify the setup go to Monitoring Tab Diagnostics System and verify the IP Address listed in the area labeled Networking Figure 52 a Screen Makram IMS IMS1000 2028 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Janis Ms Gem Monitoring Cha
26. OM 002949 DRM Page 173 of 196 Version 1 2 Doremi Labs 14 4 2 1 Managing a Drive Support for this feature is forthcoming Presently the only way to disable a drive is to physically remove it from the RAID 14 4 3 Rebuilding a RAID For information on how to rebuild a RAID please refer to Section 10 14 5 Hardware Tab e The Hardware tab provides information concerning the server itself such as Temperature Voltage Fans Error Correction Code ECC status Decoder Errors Underflows and Booting Device Figure 187 a ocreen ims 1000 net 1 D re M M ki 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Temperatures Voltages System Motherboard S Voltage 1 Storage CPU bk Voltage 2 Chipset d 3 3V MediaBlock SecurityManager 36 C E BH Log Download SM Chipset Hr S 12V SM RTC Voltage ECC Booting Device Status Model USB EDC InnoDisk Corrected Errors Underflows Capacity 3 83 GB Uncorrected Errors Figure 187 Hardware Tab IMS OM 002949 DRM Page 174 of 196 Version 1 2 Doremi Labs 14 6 Media Block Tab The Media Block tab is divided into three sections Figure 188 e Projector Model o Connection Status Displays the status of the connection with the media block o Dowser Displays whether or not the dowser is open o Lamp Displays whether or not the lamp is on e Media Decoder o Video Watermark Displays
27. back in a Login Authentication window will appear Figure 48 The default login name is doremi and the password is doremi However the administrator may have changed and or added other login usernames and passwords Please contact your administrator for the appropriate information doremi Usemame Password Figure 48 Login Authentication Window e The Overview Tab will appear every time the unit is turned on or rebooted Users can access various applications from the tabs located across the top of the GUI Figure 49 a Screen Makram IMS doremi IMS1000 Gen E Serial Number 199000 Projection User Level OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Ove rvi ew No schedule Tab data 1760 GB free of 1853 GB Figure 49 Overview Tab Screen IMS OM 002949 DRM Page 52 of 196 Version 1 2 Doremi Labs 6 1 Users The user will be prompted to enter a password for various tasks when using different applications The administrator determines the level of security Note Please contact your system administrator for passwords not Doremi Labs The following are types of passwords privileges the user may be asked for Figure 50 Admin Administrator Super User Manager ShowManager Root Administrator Ingest Projection Doremi Projection ShowManager privileges needed Username manager manager admin root other Figure 50 Password Confirmation Window In Figure 50 t
28. button and wait two minutes The LED lights on the IMS1000 will stop flashing and the HDD lights will have a steady light once it has finished shutting down e After two minutes refer to the projector manufacturer manual for proper power down sequence to shut down the projector e The IMS1000 board and the projector have now been properly shut down Warning The IMS1000 must be shut down according to the designated method Failure to follow the above method may result in file corruption IMS OM 002949 DRM Page 38 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 39 of 196 Version 1 2 Doremi Labs 5 Installation and Marriage With a Barco Series 2 Projector e Before you begin to install your IMS1000 into your projector be sure that o The projector is powered down and in the off position o Disconnect the AC power cord from the wall o Remember to always follow ESD procedures 5 1 Preparation Figure 28 Barco Projector e Remove the blank cover of the media block slot by unscrewing the two screws on the sides Figure 29 IMS OM 002949 DRM Page 40 of 196 Version 1 2 Doremi Labs Blank Cover Two Screws Figure 29 Unscrewing the Blank Cover e The media block slot should now be empty Figure 30 A ne dg DO pen ASE y nn H y H Wii settee by Io t e Ae ty a Rhy ALT Me a Pli fi A POWER 12Y 24Y viec ERROR wan GT A M da Figure
29. count Encoding Quantization EditRate Figure 155 Content Manager Composition Playlists Tab 13 9 2 1 Actions Button Support for this feature is forthcoming 13 9 2 2 Delete a CPL To delete a CPL from the server click on the CPL and click on the Delete button Figure 155 e A window will appear asking to confirm Figure 156 Do you really want to delete the selected CPL s Figure 156 Delete CPL Window e Click Ok to continue and Cancel to cancel the operation e Once the CPL is deleted it will be permanently deleted from the server and removed from any associated SPLs IMS OM 002949 DRM Page 147 of 196 Version 1 2 Doremi Labs 13 9 2 3 Information Clicking on a CPL will provide the following information Any time the user wants to exit the CPL Information window click on the Ok button 13 9 2 3 1 Properties Tab The Properties tab displays the following information about the CPL Figure 157 Sound Channel count Quantization bits Encoding Picture Encoding and Dimension e Title e UUID Universally Unique Identifier e Creation date e Package size e Duration e Edit rate frame rate e Kind e g trailer feature etc e Creator e Issuer Oo Oo CPL Information Properties Assets SPL s KDM s General Title serenity Full Movie v3 ID um uuid c6feD00d 49fd 4230 aft0150243021bdf Creation date 2012 01 30T11 35 40 08 00 Package size 183 93 GB Kind Feature Duration 01 58 55 Creator
30. does not have RJ 45 connectors but has a single DB25 connector then you will need to use the RJ 45 to DB25 converter that is provided with the IMS1000 Figure 21 IMS OM 002949 DRM Page 34 of 196 Version 1 2 Doremi Labs Figure 21 RJ 45 to DB25 Converter 4 5 GPI GPO Cables Installation AES OUT m car T GPO 13888 9 16 12 4 Lt _ Y Y Figure 22 GPI GPO Connectors e Plug one shielded CAT5 or CAT6 cable end into the connector labeled GPI on the IMS1000 board Figure 22 e Plug the other end of the shielded CAT5 or CAT6 cable into whichever automation controller is available or required e Take another shielded CAT5 or CAT6 cable and plug the end into the IMS1000 connector labeled GPO Figure 22 e Plug the other end of the shielded CAT5 or CAT6 cable into whichever automation controller is available or required IMS OM 002949 DRM Page 35 of 196 Version 1 2 Doremi Labs 4 5 1 GPI GPO Pin Out Information 000 Figure 23 RJ45 Socket Pin Out 4 6 Ethernet Cables e Connect an Ethernet cable to the Ethernet connector on the IMS1000 and the other end of the cable to either a laptop or network switch Figure 24 Figure 24 Ethernet Connector e Note Ethernet port EthO is set to DHCP by default All IMS1000 boards are shipped from the factory with the following default IP address for Eth1 o IP 192 168 100 50 o SM 255 255 255 0 o GW 192 168 100 1 For more information refer to Section 21 IMS OM
31. e g projector name screen in the first field IMS OM 002949 DRM Page 89 of 196 Version 1 2 Doremi Labs o Note For projector types please select Primary Also this could apply if the user were to use dual projector for 3D left projector would be Primary and right projector would be Secondary Click No for secondary configuration Choose the correct Series 2 projector model to connect to the unit using the Projector model field s Select the model series 2 for the projector from the drop down menu on the right Choose to either enable or disable the subtitles o Note If the user enables subtitles without the unit being connected to a projector then the server will not operate properly Check the Enabled check box at the top right corner of the GUI Click the Save button to record the settings Figure 87 A password confirmation page will appear Enter the password to save and record the settings SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear 12 3 1 1 Removing a Device or Projector To remove a device or projector click on it in the left part of the Device Manager GUI Click the Delete Device button Figure 87 12 3 2 Automation Libraries Management Support for theater automation control is also provided The list of currently supported devices is the following o CNA o JNior o A pre built library
32. from the wall o Remember to always follow ESD procedures 4 1 Preparation Figure 5 NEC Projector e Gently pull on the filter cover to remove it Figure 6 Figure 6 Remove Filter Cover IMS OM 002949 DRM Page 27 of 196 Version 1 2 Doremi Labs e Remove the four screws holding the projector cover in place Figure 7 vu TUL Screw Key Hole Screw Figure 7 Screw Locations e Using the key for the projector screen turn the key in the lock to the right so that it is unlocked Figure 8 Figure 8 Projector Unlock e Gently pull the cover off to remove it from the projector Figure 9 IMS OM 002949 DRM Page 28 of 196 Version 1 2 Doremi Labs Figure 9 Projector Cover Removed e Remove the blank cover of the media block slot by unscrewing the two handles at the y side Figure 10 e j Ze ef d y fy EH gt Sa D gt ra e SA E Two i SS Handles 3 Blank Cover Figure 10 Unscrewing the Slot Cover e The media block slot should now be empty Figure 11 IMS OM 002949 DRM Page 29 of 196 Version 1 2 Doremi Labs Figure 11 Empty Slot e Carefully remove IMS1000 from its carton and antistatic bag e Gently place the IMS1000 board into the projectors media block slot guiderails Figure 12 on the inside of the slot Figure 11 HDD 3 AES OUT _ 0 remi tito DL GPiae GPO 1 8 eg 9 16 12 3 4 SD EN Figure 12 Missing HDDs e Screw in the h
33. heel straps properly attached o Never touch a sensitive component or assembly unless properly grounded e Always assume that all electronic solid state components and assemblies are sensitive to ESD damage e Always do the work on static safe work surfaces work stations desks Make sure your desk and wrist strap ground outlets are connected to the building ground e Be aware of the static generating materials that you work with e Always use grounded cards during loading unloading of ESD devices e Never transport store or handle sensitive components or assemblies except in a static safe environment ESD static bags e Always store ESD devices using safe tote boxes e Personnel Training o Training courses should be required for all employees who handle or otherwise come into contact with ESD items o The training program and the level of ESD protection should be tailored to the needs and sensitivity of the product or production area o Recurrent training for personnel should be an integral part of the program IMS OM 002949 DRM Page 18 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 19 of 196 Version 1 2 Doremi Labs 3 IMS1000 Overview The IMS1000 is a state of the art DCI compliant Integrated Media Server capable of playing movies and trailer packages in MXF format at up to 500 Mbits sec when installed into a DLP Series 2 Projector The IMS1000 supports the
34. hot swappable hard drives allows access to pins and traces supplying power to the hard drive backplane This is considered an energy hazard Removal of the hard drives must be performed by a trained service specialist or by trained personnel The equipment may only be used in a restricted access area which is not accessible to the general public Caution e The non removable battery is located on the IMS1000 fusion board e Danger of explosion if battery is removed IMS OM 002949 DRM Page 14 of 196 Version 1 2 Doremi Labs WARNING To prevent fire or shock hazard do not expose this appliance to rain or moisture CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with the arrowhead symbol superimposed across a graphical representation of a person within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance IMS OM 002949 DRM Page 15 of 196 Version 1 2 Doremi Labs 1
35. lever on the front side in order to release the spring loaded HDD carrier handle With the carrier handle open insert the drive all the way into the chassis cage Figure 33 Spring Loaded HDD Carrier Handle Figure 33 HDD Insertion Close the silver HDD carrier handle until you hear an audible click and the release tab has locked the HDD into place e Repeat for the other two HDDs The HHDs properly installed will look like the image presented below Figure 34 yt T H A S 1 ETH 0 e eSATA e 1 2 cpy 4 USB OUT NI ash 1no asn IDVIVALNI OE 0 1 3SOd4Nd 1WIINID Figure 34 HDDs Inserted IMS OM 002949 DRM Page 43 of 196 Version 1 2 Doremi Labs 5 3 Audio Cables Installation AES OUT 9 16 GPl GPO 1 8 9 16 Figure 35 Audio Connectors e Plug one shielded CAT5 or CAT6 cable end into the connector labeled AES OUT 1 8 on the IMS1000 board Figure 35 e Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor e Take another shielded CAT5 or CAT6 cable and plug the end into the connector labeled AES OUT 9 16 Figure 35 e Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor Note If the audio processor does not have RJ 45 connectors but has a single DB25 connector then you will need to use the RJ 45 to DB25 converter that is provided with the IMS1000 Figure 36 91 6 4u gt 2 eu oipny SAV ee a Figure 36 RJ 45 to
36. of 196 Version 1 2 Doremi Labs e Selecting the Revert button will close a document without saving the changes Use this with caution 12 5 3 Inserting Actions into Macro Cues e Goto the Administration tab and then select Macro Editor e Highlight the Macro to be affected e Click the Select an Action to Insert drop down menu Figure 95 SW Screen M S 1 0 0 0 Software Version 24 30 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT D New 2 Delete O Settings it A Macro Start Time Action SP Device Manager Test Trigger Cue A Content Feed Manager Terminal 0 system SI Control Panel Select an action to insert Select an action to insert Projector Dowser Insert Button ayback Actions Video Output Action Sensio 3 3D RealD SBS Figure 95 Add a New Action Window e To addan action to the Macro Automation Cue click on its corresponding action and click the Insert button Figure 95 e The actions available include the following e Projector o Projector Dowser open or close the selected projector dowser o Lamp power on or off the selected projector lamp o Projector Channel Switch switch the selected projector channel o Macro execute the macro defined in the selected projector e Input Output o General Purpose Output configure a GPO line o Send Message send a message to the connected device e Playback o Audio Volume control the au
37. of supported automation commands is available for each of these two devices These automation commands can then be added to Macro Cues 12 3 3 Adding an eCNA Device To add the eCNA device click the New Device button in the Device Manager window Figure 84 The New Device drop down window will appear Select eCNA The Device Manager GUI will be updated to reflect the addition of the eCNA device Input the eCNA Server IP address in the appropriate field Figure 88 If not already done check the Enabled check box in the top right corner of the GUI Click the Save button to record the settings A window asking for the password will appear Enter the password to save the settings and proceed IMS OM 002949 DRM Page 90 of 196 Version 1 2 Doremi Labs doremi 12 3 Device ZA Macro Editor A Content Feed Manager v i Terminal 10 System Control Panel IMS1000 Serial Number 199000 OVERVIEW ADMINISTRATION CONTROL MONITORING Closed Caption g Device Type eCNA Y Enabled FEROE Subtitle Engine identifier CH Server IP Figure 88 eCNA Added 3 1 Removing an eCNA Device Software Version 2 4 3 0 Projection LOGOUT To remove the eCNA device select it in the Device Manager GUI and click the Delete Device button Figure 87 12 3 4 Adding a JNior Device Note IMS OM 002949 DRM To add the JNior device click the New button in the Device Manager window Figure 84 The New Device drop down window
38. the Macro Actions window and click the Delete button Figure 102 12 5 11 Macro Saving e Repeat the Macro creation operations for all the Macro Automation Cues and click the Save button Figure 102 e The user will be asked for a password to be able to perform the operation e Enter the appropriate password and click the Ok button SuperUser privileges are necessary in order to be able to save changes If you are already logged inas a SuperUser the Password window will not appear e The Macro Automation Cues will be available in CineLister in order to create a ShowPlaylist Note The saving operation will not only save the Macro Automation Cues but also the Trigger Cues that were created 12 6 Trigger Cue Tab A Trigger Cue allows for the execution of a Macro Automation Cue upon the occurrence of an event from an external device using a Signal or General Purpose Input When the user selects an event to occur from the external device the occurrence of that event triggers a Macro Automation Cue The Macro Automation Cue will then be executed Both the event and the Marco Automation Cue are defined during the Trigger Cue creation Note The Signal comes from an external device connected over the Ethernet The external device options are eCNA JNior and Raw IMS OM 002949 DRM Page 103 of 196 Version 1 2 Doremi Labs Example If a Trigger cue is based on the event Wait for GPI 1 ON it is possible to link a specific M
39. 00 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection SP Device Manager LOs Macro Editor 4 Content Feed Manager 10 System Terminal m Ers OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Template Mapping Disabled Figure 82 Template Mapping Drop Down Window Make sure to click the Save button to ensure the configuration is saved SuperUser privileges are necessary to save changes The list of possible labels that can be routed if present in the audio MXF file are defined by SMPTE as follows O O O O O O O O O O OO L Left R Right C Center LFE Screen Ls Left surround Rs Right surround Lc Left center Re Right center Cs Center surround Rrs Right rear surround Lrs Left rear surround HI Hearing Impaired VI N Visual Impaired Narration 12 2 5 Interop Packages Interop audio MXF files do not contain any channel label information Therefore if a configuration is selected the routing will be executed as if the audio MXF file was created according to the ISDCF audio mapping recommendations which currently consists of Figure 83 IMS OM 002949 DRM Page 86 of 196 Version 1 2 Doremi Labs Channel Configuration in package i L et Hiecht E creen low frequency effects Left surround or left side surround Right surround or right side surround Hearing impaired with emphasis on i HI AT ITO sa de Ki LI Lo q E WEE i
40. 196 Version 1 2 Doremi Labs 12 3 3 1 Removing an CCNA Devce N N EE 91 12 3 4 Adding aJNIiOr DEVIC Serina do 91 12 3 4 1 Removing a JNior Re 92 1235 Adding a Raw DC oe ple 92 12331 REMOVING a RaW Devices 93 1230 EE 93 1236F WOIDY EIERE 93 SE RER EE e GE 94 12 30 35 SENSO SD SUPHO EE 94 123 e e Ee Capion SUDDO EE 94 12 3 8 Subtitle Engine Contguraton 94 124 MACIO EMO A A A A AAA aceasta EA 96 t241 PROTONATION GUESS 96 129 Macro AUIOMAUON EE 96 12 5 1 Macro Creation Using Macro Editor seeneoennennsenssneesnnesnneseresnnessnesseessressressressrenseees 96 12 5 2 Editing a Macro Automation ET 97 125 3 Inserting Actions into Macro Cues sencis a Riek 98 12 5 4 Add a GPO Action to the Macro Automation ue 99 1259 Playpack ACOSO T N A a teal 99 125 0 Video QUIPUTACUON IAS ON EE 100 t297 DOWSEr HEES EEN ei a a a 100 12 5 8 Projector Channel Switch Inserton 100 125 9 Automation Library E LE 101 125 91 Using Automaton LID Vieira 101 1259 2 Resulling Macro SEMINO EE 102 IMS OM 002949 DRM Page 5 of 196 Version 1 2 Doremi Labs 12 5 10 Action List Management kee 103 122381101 ACTION RE Ordern o 103 E Ke tee le a 103 129109 FACTION ROMOV A dalla 103 TZN MACO SAVING WEE 103 12 0 TIMOR CUS EE 103 T261 Trigger Cue Tab eege dia 104 12 62 rigger Cue reali 104 12 6 3 Connection to a General Purpose Input Event 105 12 6 4 Connection to a Signal Eventi seissanta ETNA 107 A lo 21 CUE ee E 108 1266 Pre Delinea M
41. 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 58 of 196 Version 1 2 Doremi Labs 8 Time Zone Configuration Units are by default set to Pacific Time Zone PST or PDT This section provides information on how to check and or change the time zone 8 1 Checking the Time Zone e To confirm that the time zone of the unit is set correctly go to Monitoring Diagnostics System e The System screen will provide information on what Time Zone is configured Figure 52 e Alternatively to check the time and time zone go to Administration Control Panel Time Settings and the Date and Time tab will appear Figure 54 Wl Scree Makram IMS doremi IMS1000 Goen E Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Y Device Manager EI Macro Editor E Content Feed Manager P Terminal O system Changetime 11 FJ 23 BY 34 BY update Current Date Tue 26 March 2013 Current Time 11 23 36 cui Timezone America Los_Angeles Le Update Figure 54 Current Date and Time Window IMS OM 002949 DRM Page 59 of 196 Version 1 2 Doremi Labs 8 2 Changing the Time Zone To change the time zone follow the steps bellow e Goto Administration Control Panel Time Settings and the Date and Time tab will appear e Click on the box labeled Timezone e A list of time zones will appear Figure 55 D Sereen Makram IMS M S 1 0
42. 30 OBS ECU Usemama manager El eecccece Advanced ll Control Panel Remote Path Option Button Hide advanced options Authorize play while ingest from this server File type to scan Key Delivery Message Doremi License Y Composition Playlist S ave Show Playlist Y installation Package Button Figure 115 Advanced Options Menu Clicking the Advanced Options button will open a menu where the user can configure the following file types to be used for ingesting Figure 115 e Authorize play while ingest from this server e Key Delivery Message allows the KDM to be ingested from the FTP or another server registered in the netmap e Composition Playlist enabled by default allows import or FTP of a CPL into the server e Installation Package software security manager firmware packages for upgrades e Doremi License DLM Doremi License Messages e g Dolby3D RealD 4K Enabled etc e Show Playlist click this box to be able to export and then import a SPL from one server to another e Click the Save button to save the configuration IMS OM 002949 DRM Page 112 of 196 Version 1 2 Doremi Labs 12 7 4 Adding a Server Manually 12 7 4 1 Networking the Server s Save Button Delete Button doremi SP Device Manager The Content Feed Manager GUI can be manually set up by clicking the New Repository button This will allow the user to add a new server for which the fields will have
43. 5 of 196 Version 1 2 Doremi Labs 12 4 Macro Editor 12 4 1 Automation Cues An Automation Cue is an action demand that is sent from the IMS1000 to any external device connected to the IMS1000 for the purpose of being inserted into a Show Playlist Upon installation of the IMS1000 Automation Cues can be predefined by the operator transferred from an XML file or added manually Automation Cues can be added to CPLs and SPLs using CineLister 12 5 Macro Automation Cues A Macro Automation Cue consists of two parts an Automation Cue and a Trigger Cue Trigger Cues are explained fully in the Section 12 6 Trigger Cues A Trigger Cue is an action that is sent to the IMS1000 whereas an Automation Cue is sent from the IMS1000 Also Macro Cues are a sequence of actions whereas an Automation Cue is only one action 12 5 1 Macro Creation Using Macro Editor e Goto the Administration tab and select Macro Editor e The Macro Editor GUI will appear Figure 92 doremi IMS1000 S nar Von 2430 Serial Number 199000 User Gg Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT E New 2 Delete EN Settings SP Device Manager it Macro Start Time Action New ge Trigger Cue Macro Content Feed Manager Button F Terminal 0 System m Control Panel Select an action to insert Figure 92 Macro Editor GUI e Click on the New Macro button to begin the creation process Figure 92 e The user will b
44. 9 DRM Page 100 of 196 Version 1 2 Doremi Labs Channel Settings ProjectorName All Value 1 Switch to channel number 1 i Figure 100 Add a New Action Window Channel Switch e Choose the name of the projector from the drop down menu window that appears Figure 100 e Use the plus minus buttons to select the channel to send the command to e Click the Ok button 12 5 9 Automation Library Usage 12 5 9 1 Using Automation Library Support for theater automation control is provided The list of currently supported devices is e eCNA e JNior Expansion Module e JNior When one of the supported devices e g eCNA and JNior is added the Macro Editor will allow the user to use the corresponding commands for each device e o use a library command click on Library in the Add an Action window and click Insert The following pop up window will appear Figure 101 IMS OM 002949 DRM Page 101 of 196 Version 1 2 Doremi Labs Library Driver Certainty Action SET_4K_MODE_OFF Message Message Label Device Name Message Type Message Figure 101 Library Window e Select the desired driver and action Click the Ok button or Cancel to cancel this command 12 5 9 2 Resulting Macro Setting e The right part of the Automation Cue tab will display the added actions as illustrated below Figure 102 E Screen A 1 re M M S 1 000 Software Version 243 0 Trig g er Serial Number 199000 User Level Proj
45. ANQHON EE 44 DA EE 45 5 4 1 GP GPO Pin O Ub IO NON ada 45 O CAI E 46 30 SEENEN 47 Ir MINAJ tne ene O A IR Re re eT 48 SO ee EE 50 6 Operating SSI Masia 52 Gb US Si a 53 T Network ContiguratiON sintamos 55 7 1 Default Network Configuration cccccccccccssccsssscsessscssscesssscsssscssseecssscssssesesscsssessessecensecssaseoeas 55 fe e ele ee tee ele 55 L3 Ee 57 8 Time Zone en UI A o A h Eau Uak KETAR EER NTEN EVEA TiA 59 EN E e 59 0 2 CRANGING THC Ree 60 8 3 CHARGING ee TINO A A as 60 IMS OM 002949 DRM Page 3 of 196 Version 1 2 Doremi Labs gA ame AY ak EE 62 Y Marrlage Eelere eege 64 10 Building inde RAID uscar rice 69 11 OVerVIeW ad E 72 12 AQMINISTANON Tabo od 74 12 1 Audio Configuration Channel Mappmg conocio conan nononnnronononannnrann nono 75 212 CANCINO TA e a a at 76 122 1 Disabled GCOnmnle ig TB 76 12 2 2 Pre Defined Mapping ConfiguratiONS ooooocnonocnononononnnnonanonnrnanonanoononaconnnnonanannnos 76 12221 DEENEN 76 122 22 SX CNaNNE Sara 77 t2223 Seven Channel eeni 78 12224 Edita Sa dia 79 aaa Ne Cananea adidas 80 E ER E 81 12227 Passthrougn C nngduratoN EE 82 12 2 2 8 Custom Mapping Contfguraton 83 1223 AUdIO Delay CONQUE ind 84 1224 SMPTE PA A e ois ced 85 122 lio sa AAA O O O O 86 12 3 Deco Mana nana 88 1231 AQUINO De 88 12 3 1 1 Removing a Device or Projector EEN 90 12 3 2 Automation Libraries Management 90 12353 Adding an O Re 90 IMS OM 002949 DRM Page 4 of
46. Administration applications go to the Administration tab e A drop down list will appear when the mouse is hovering over the tab Figure 69 Click on this tab and all Administration applications will appear in the window s left hand pane e A drop down menu will also appear when hovering over the Control Panel tab in the Administration tab It will reveal several more applications H j 0 re M M ki 000 Screen IMS1000 domain net Software Version 2 4 3 0 Serial Number 199000 User Level Projection stration OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT SP Device Manager ZA Macro Editor Terminal Content sed Manager ini C Terminal CONTROL PANEL gt Io Administration System Tab Lo system ME SETI m D Content Feed Manage Ss Control Panel Figure 69 Administration Tab Window e Device Manager Allows the user to add different projectors close caption devices subtitle devices etc e Macro Editor Allows the user to quickly execute a macro e Content Feed Manager Allows the user to browse FTP manage and export all the content available on the player including ShowPlaylists CPLs KDMs and Doremi Licenses e Terminal Allows the user to perform terminal commands e System Allows the user to shut down and restart the unit e Audio Configuration Allows the user to map route all audio tracks to operator designated outputs only SMPTE content e Time Setting DCI specification allows the user to o
47. DRM Page 130 of 196 Version 1 2 Doremi Labs Show Playlist available on the server Stem and Serenity Test Figure 137 Delete SPL Window e Select the SPL to delete and click Delete 13 4 3 Element Properties e To view the properties of any element in a Show Playlist select the element from the right side of the GUI Highlight the selected item and click on the Properties button that appears on the right Figure 136 e The Composition Playlist Properties window will appear Figure 138 Composition Playlist Properties UUID urn uuid c6fe000d 49fd 4230 aff0 f50243021bdf Content Title Serenity_Full_Movie_v3 Content Kind Feature Duration 01 58 55 Picture Encoding JPEG2000 2048 x 1080 Rate 241 Sound Channels 6 Quantization 24 bits KDM available Figure 138 CPL Properties 13 4 4 Unencrypted CPLs IMS OM 002949 DRM Page 131 of 196 Version 1 2 Doremi Labs If the element selected is an unencrypted CPL the following properties window will appear Figure 139 Composition Playlist Properties UUID Content Title Content Kind Duration Picture Encoding Rate Sound Channels Quantization E urn uuid 98781194 c4bc 3042 9b08 e81ibdiee3557 StEM_DCI Chinese subtitles Feature 00 12 17 JPEG2000 2043 x 857 241 igure 139 Unencrypted CPL 13 4 5 Encrypted CPL with KDM Valid more than 48 Hours lf the element selected is an encrypted CPL the following Properties wind
48. Device Manager Macro Editor Closed Caption Cl Seen Projector A E Content Feed Manager Subtitle Engine E Terminal CONTROL PANEL gt 0 System DLP Head IP a m J Vendor IP EE a bs Marriage MARRIAGE TOOL Username Tool HEATER PROPERTE Password Enable subtitles Yes No Primary projector Yes No Figure 61 Marriage Tool e The Authentication window will appear Figure 62 Authentication Required IP address 192 168 100 12 Port 43749 Username Password Figure 62 Authentication Window Select Security Officer from the drop down menu Enter the appropriate username and password Click the Ok button Hit the Esc button on the keyboard to complete the login Click the Refresh button On the Marriage Tool screen that appears enter the Authorization ID and click the Re Arm Service Door button Figure 63 e Click the Refresh button IMS OM 002949 DRM Page 66 of 196 Version 1 2 Doremi Labs Re arm Service Door Button Initiate Marriage Button doremi SP Device Manager ZA Macro Editor EN Content Feed Manager T 1 Terminal 0 system ook IMS1000 Serial Number 199358 OVERVIEW ADMINISTRATION item Identifier Serial Number Version Battery Status RIC validity FPGA temperature CONTROL MONITORING Hem ICP Communication Enclosure Service Door Physical Mamage Logical Mariage Active Marriage Authorization ID z Re arm Service Door initiate Marriage Fi
49. Doremi Labs 22 Acronyms V dada CPL DCI DLM LCD LED SPL GA XML Video Graphics Array XML Extensible Markup Language Screen Management System Ve IMS OM 002949 DRM Page 194 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 195 of 196 Version 1 2 Doremi Labs 23 Document Revision History ome version een 04 26 2013 1 1 Minor editorial change made 05 06 2013 Revision made to Section 7 2 IMS OM 002949 DRM Page 196 of 196 Version 1 2 Doremi Labs
50. Figure 128 a Screen ims1000 1 ims 1000 domain net M S 1 0 0 0 Software Version 24 340 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Shutdown Button SP Desioa Manager e To restart the system click the Restart button You will be automatically disconnected from the web interface e To shutdown the system click the shutdown button EI Macro Editor Content Feed Manager Restart es Button m Control Panel Figure 128 System GUI If content is currently being played a window will appear asking the user to confirm the restart or shutdown IMS OM 002949 DRM Page 122 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 123 of 196 Version 1 2 Doremi Labs 13 Control Tab 13 1 Show Management Using CineLister CineLister is based on a Graphical User Interface GUI that allows the creation management editing and playback of SPLs and other ingested content CineLister also has the capability to schedule playbacks 13 2 CineLister Editor Tab e To access the CineLister GUI go to Control CineLister e The user will be prompted to CineLister s Playback tab The Playback tab is the default tab that CineLister displays every time the application is opened Figure 129 a Sereen ims1000 1 ims 1000 domain net M S1 000 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser Playback OVERVIEW ADMI
51. IMS and the other end of the cable to LAN connector on the Barco projector s cinema controller slot Figure 40 AES OUT i GPieeGPO 1 8 e 9 16 aa 34 SDI B SM GENERAL PURPOSE 1 0 _ e gt h E LAN Ss e Connector Figure 40 Ethernet Connections IMS OM 002949 DRM Page 46 of 196 Version 1 2 Doremi Labs e For more information refer to Section 21 5 6 Power on Projector e Connect AC power to the projector Figure 41 f P 3 A 26 3 i Figure 41 AC Power e Turn the projector on The expected boot up time is about a 2 30 minutes Figure 42 Please refer to the projector manufacturer manual for proper power up sequence Figure 42 Power Switch e To access the IMS1000 GUI Graphical User Interface launch your browser on the computer that is connected and enter the IP address into the browsers window You will be presented with the Doremi IMS1000 Login screen e Enter Username doremi e Enter Password dorem e Click the Login button IMS OM 002949 DRM Page 47 of 196 Version 1 2 Doremi Labs 5 7 Marriage Marriage on the Barco projector is done directly on the projector The Marriage Tool GUI is not used Once the projector has finished booting up the taillights at the back of the projector will be red indicating that the board and the projector are not married If there is a touch screen attached to the projector two tamper errors will appear indicating that the marriage has n
52. Introduction 1 1 Purpose This manual is intended to demonstrate to the user how to install operate and use the software on the IMS1000 Integrated Media Server 1 2 Software Version e This manual is intended for use with software version 2 4 x and higher e The SM Versions are o 6 0 X and higher for Series 2 Projectors 1 3 Contact Technical Support If in need of help or assistance please contact Doremi Labs Technical Services USA 24 7 Technical Services line 1 866 484 4004 Technical Services Email cinemasupport doremilabs com Europe 24 7 Technical Services line 33 0 492 952 847 Technical Services Link http support doremitechno org ticketing Japan Technical Services line 044 966 4855 Technical Services Email support doremilabs co jp Australia China India Indonesia Korea Malaysia New Zealand Philippines Singapore Taiwan Thailand Technical Services Email supportasia doremilabs com IMS OM 002949 DRM Page 16 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 17 of 196 Version 1 2 Doremi Labs 2 ESD Rules ESD Electrostatic Discharge Safety Rules ESD Electrostatic Discharge safety rules are to be respected while installing repairing or upgrading hardware on Doremi Cinema Servers The basic rules and elements of ESD control are the following e Grounded personnel o All technicians must wear ESD safe smocks wrist straps and
53. L asset scanned e9fa1db3 34c6 4d31 a630 59730115e509 ASSETMAP scanned 501 c0fa4 a6c0 4381 83e5 bd48ced9bdb8 Total Progress 2 PKL asset scanned e9fta1db3 34c6 4d31 a630 59780115e309 Copied 1ec2aSta 5de1 4f53 0947 769e1e3d71a5 Figure 153 Ingest Progress 13 9 Content Manager The Content Manager application is a graphical user interface GUI that allows the user to browse manage and export all the content available on the player including ShowPlaylist CPL KDM and Doremi License The user has an application to access content information that was not available previously The Content Manager application is available in the Control tab e To open the Content Manager application go to Control Content Manager e The following window will appear Figure 154 IMS OM 002949 DRM Page 145 of 196 Doremi Labs Version 1 2 13 9 1 Overview a Screen ims 1000 net doremi wem Serial Number 199000 Projection OVERVIEW ADMINISTRATION CONTROL MONITORING a Refresh Q CineLister Ingest Manager Free disk space 1649 GB Used space 11 a Composition Playlist CPLs Decryption Keys Complete Incomplete Show Playlist Licenses Device Controller ef Macro Execution SPLs 3 HU Figure 154 Content Manager Main Tab e A complete CPL is a CPL that is playable An incomplete CPL misses elements therefore is not playable An unavailable CPL might be listed by a SPL but it might have been deleted from
54. M Page 143 of 196 Version 1 2 Doremi Labs e Select the device from which to ingest from Its content will be displayed inside the GUI Figure 152 a Scree IMS1000 M S 1 0 0 0 Software Versio 2 4 3 0 Serial Number 199000 ker Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT a Ingest lt Refresh 10 11 18 51 El all elements A P ngest 10 11 18 51 scanned about 0 minute ago Ingest Monitor Upload Content Manager NJK 2011_ADV_F_XX XX_13 1_AURO 2K GS 20120718 ON EG Device Controller Sr NUK 2011_ADV_F_2000 _13 1_AURO_2K GS_20120718_0V_ENC ZA Macro Execution ODD_vi_DJR Figure 152 Remote Server Ingest e Select the item to ingest and click the Ingest button Figure 150 Note The server must be added through Content Feed Manager 13 8 1 5 Pngest Support for this feature is forthcoming The Pngest feature is available when the user is ingesting content over a Doremi remote server or LMS Note The Pgnest feature is available only when ingesting content over a Remote Doremi Server or a LMS not from a USB or eSATA When the user is ingesting a Composition it can be played while it is being ingested rather than waiting until the ingest is complete to play it Give the CPL approximately 5 7 minutes to load The user cannot rewind or fast forward during playback To rewind the user will have to start from the beginning The user will be able to view the CPL at the rate that it is being ingested 1 e like a
55. MS1000 Gen E Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT ari New Delete SP Device Manager ZA Macro Editor Closed Caption RR Device Type Projector Projector E E Content Feed Manager Subtitle Engine Identifier Projector E Terminal Projector model Unknown y Unknown A 0 System DLP Head IP Control Pz Vendor IP Username Password Enable subtitles Yes No Primary projector Yes No Figure 86 Device Selection Window Projector Item Selected The main configuration window will be updated to reflect the addition of the Projector device The user will be able to enter the projector parameters as illustrated below Figure 87 a Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT C New Delete SP Device Manager to Macro Editor C _ed Caption z Device Type Projector or rf Ofer AO Content Feed Manager Subtitle Engine Ke Projector E Terminal Projector model Unknown sounknown A O s m DLP Head IP bod Vendor IP Username Delete Device Button Password Enable subtitles Yes No Primary projector Yes No Save Button Figure 87 Device Manager GUI Projector Fields Configuration To perform the projector configuration follow the steps below e Specify a projector identifier
56. Manager GUI Figure 150 can be accessed by going to Control Ingest Manager lt will only show items that can be supported by the IMS1000 text documents pictures power point presentations etc will not appear 13 8 1 Ingest Scan The Ingest Manager Tab automatically opens the Ingest Scan tab mi Screen IMS1000 VI S 1 0 0 0 Software Version 2 4 3 0 i Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT a Ingest lt Refresh cineLister Sl Selecta location B P ngest Ingest Monitor Upload Content Manager Device Controller ZA Macro Execution Figure 150 Ingest Monitor Note Compositions CPLs Key Delivery Messages KDMs Doremi License Files DLMs and Show Playlists SPLs can all be ingested through the Ingest Manager GUI 13 8 1 1 Content Types Different types of content can be displayed in the Ingest Manger GUI window Y Reel icons represent a Composition Package which contains audio video content e g features trailers etc e speaker and Film icons represent individual compositions within a Composition package e S Film icons represent Show PlayLists SPLs which contain the main feature and trailers IMS OM 002949 DRM Page 142 of 196 Version 1 2 Doremi Labs o Note When the SPL is ingested the Ingest Manager GUI will show all of the components that make up the SPL D S Lock icons represent Key Delivery Messages KDMs
57. NISTRATION CONTROL MONITORING LOGOUT a Vs Manual Editor Schedule Ingest Manager x remaining 00 00 00 Content Manager Device Controller LOs Macro Execution remaining 00 00 00 Mode Play then Eject Figure 129 CineLister GUI Playback Tab e o access the Editor tab click on the Editor on the left side of the window or on the green arrow button on the right side Figure 129 e The Editor tab is composed of two different parts Figure 130 o The left pane displays all of the content e g features trailers advertisements and Automation and Trigger Cues o The right pane is used to display the content of a given Show Playlist IMS OM 002949 DRM Page 124 of 196 Version 1 2 Doremi Labs doremi Q cine Playback schedule Ingest Manager Content Manager Device Controller ZA Macro Execution IMS1000 Serial Number 199000 OVERVIEW lt Refresh tul New all elements a e Automation Cues Dowser Open HDMI Mode Internal Pause Feature Serenity Full_Movie_v3 Gi my Open Save ocreen ims 1000 net Software Version 2 4 3 0 User Level Projection ADMINISTRATION CONTROL MONITORING LOGOUT 4 Ke b Properties Delete SPL Show Playlist 2D StEM_DG Chinese subtitles Black 3D Black 3D 48 Start Time Elements Figure 130 Editor Tab 13 2 1 Show Playlists A Show Playlist SPL is a succession of Compositions CPLs Automation Cues and Trigger Cues Show Playlists m
58. OL MONITORING B utto n s Device Manager Os Macro Editor mm Content Feed Manager P Terminal 0 System em Poot Figure 125 Contacts Tab e Click on the New button e The Add Contact window will appear Figure 126 e Fill out the appropriate information and click Save e The contact will appear in the Contacts tab Add Contact Name Phonel Phone2 Email Country AFGHANISTAN AF Figure 126 Add Contact Window IMS OM 002949 DRM Page 120 of 196 Version 1 2 Doremi Labs 12 12 Terminal To log into the Terminal tab Administration tab Terminal enter the admin user login name and password Figure 127 E Screen ims1000 1 ims 1000 domain net IM 1 000 Software Version 243 0 serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT ims1000 1 ims 1000 domain net login Jj SP Device Manager EI Macro Editor Content Feed Manager DI Gvstem m Control Panel Figure 127 Terminal Login If possible all changes made to settings should be done through the Terminal GUI IMS OM 002949 DRM Page 121 of 196 Version 1 2 Doremi Labs 12 13 System The System Tab Adminstration tab System allows the user to restart and shutdown the unit e Torestart the IMS1000 press the Restart button You will be disconnected from the web interface in 5 seconds Figure 128 The user has the option to cancel the action e To shut down the system click the Shutdown button
59. PL s Hearing Impaired HI audio channel Ch 16 is VI Output ch 16 will be playing the CPL s Narration VI audio channel IMS OM 002949 DRM Page 80 of 196 Version 1 2 Doremi Labs A Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection P o D v i R Right 0 System Wei OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Device Manager Template Mapping 9 channels Macro Editor Channel Label Channel Label Content Feed Manager ULeft Cs Center surround Terminal Mute C Center Mute LFE Screen Mute Ls Left surround Mute Rs Right surround Mute Lc Left center Hl Hearing impaired Rc Right center VI N Narration Figure 76 Audio Mapping Set to Nine Channels 12 2 2 6 ISDCF This configuration is defined as follows Figure 77 Ch 01 is Left L Output ch 01 will be playing the CPL s Left L audio channel Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel Ch 04 is LFE Screen Sub Woofer Output ch 04 will be playing the CPL s LFE Screen Sub Woofer audio channel Ch 05 is Left Surround Ls Output ch 05 will be playing the CPL s Left Surround Ls audio channel Ch 06 is Right Surround Rs Output ch 06 will be playing the CPL s Right Surround Rs audio channel Ch 07 is HI Output ch 07 will be playing
60. Page 107 of 196 Version 1 2 Doremi Labs Choose the device from the drop down menu Choose the driver from the drop down menu Choose the signal from the drop down menu and the signal name will auto populate Click Ok when finished and the connected Signal event will appear in the right part of the Editor tab Figure 110 sl Screen IMS1000 M S1 000 Software Version 24 34 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING New Delete t Settings WW Device Manager e Trigger PP Wait for Signal ALLSTOP eS Automation Cue Content Feed Manager f 1 Terminal OT SI Control Panel Save Button Figure 110 Signal Added 12 6 5 Trigger Cue Saving e Repeat the Trigger Cue creation operation for all Trigger Cues that are created and click the Save button Figure 110 e The user will be asked for a password to be able to perform the operation SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear e Enter the appropriate password and click the Ok button e The Trigger Cues will now be available within CineLister so that the user can include them in a Show Playlist Note The saving operation will not only save the Trigger Cues but also the Macro Automation Cues 12 6 6 Pre Defined Macro Usage If the user has a pre defined macros xml file containi
61. Trigger Cue in a Show Playlist e The newly created Trigger Cue will appear in the Trigger window and it will be ready to connect to a GPI event Figure 105 m Screen doremi ms1o00 m Serial Number 199000 User Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING gt delete O settings SP Device Manager Connectto an event A ZS sg es z Automation Cue Content Feed Manager z i Terminal O System m Control Panel Figure 105 Trigger Cue Defined e To editan existing Trigger Cue select it in the Trigger window and click on the Settings button or double click on it Figure 105 e The user will be able to edit the name of the Trigger Cue using the same window e Toremove a Trigger Cue select it in the Trigger window and click the Delete Trigger button Figure 105 12 6 3 Connection to a General Purpose Input Event e To connecta Trigger Cue to an event select it in the Trigger window and click the Connect to An Event drop down menu Figure 106 IMS OM 002949 DRM Page 105 of 196 Version 1 2 Doremi Labs H doremi M S1 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT gt New 2 Delete O Settings SP Device Manager q 5 Trigger Test Automation Cue Content Feed Manager T 1 Terminal System k Panel Add ontrol Pane Button Connect to an event A Connect to an event General Purpose Input Signal
62. UT Add ei Jevice Manager Button F Macro Editor Add 4 Content Feed Manager T Terminal 0 System Screen IMS1000 domain net M S 1 0 00 Software Version 243 0 serial Number 199000 User Level Projection pool ntp org Extra delay seconds Figure 57 NTP Servers IMS OM 002949 DRM Page 62 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 63 of 196 Version 1 2 Doremi Labs 9 Marriage Tool To complete the marriage of the projector to the IMS1000 the user must configure the projector in the Device Manager before proceeding with the marriage process This process is used to complete marriage for the NEC projector With Barco projectors marriage is done directly on the projector Section 5 7 After marriage is complete the Barco projector will be automatically detected in the Device Manager To access the Device Manager go to Administration Device Manager Figure 58 E Devi ce d Screen IMS1000 domain net N S 1 000 Software Version 24 30 Manager serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT DEVICE MANAGER WW Device Manager ZA Macro Editor Content Feed Manager Terminal CO ANEL 2 0 System OREG S Content Feed Manager ler Control Panel Terminal Figure 58 Device Manager e Select Projector from the New Device drop down menu Figure 59 IMS OM 002949 DRM Page 64 of
63. V7_TST 2K C 24 81 EN EN EN DRM OV OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Y S Refresh New Save b Properties Delete all elements E e SPL Show Playlist 2D Test b Ges 00 00 00 Doremi V7_TST_2K C 24 31 EN EN EN DRM ON DN C on te nt Black Black 3D Test fo Black 3D 48 Content Test Doremi V7_TST_2K C 24 81 EN EN EN DRM_OV Start Time Elements Figure 192 Pre Loaded Content e To test playback click on the content so that it appears in the right side of the GUI Figure 192 e Go to the Playback tab in Cinelister and click on the Play button IMS OM 002949 DRM Page 179 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 180 of 196 Version 1 2 Doremi Labs 16 Appendix A General Purpose Output Connection Diagram Typical Application GPIOBUS O gt LGE 5V up to 24V GPI 0 Ar sco e mo TEA s te Each general purpose output has an open collector stage The stage can turn on relays ci with voltage range of 5V to 24V and current up GPOJOJ to 200mA PORI 4 Ee 4 GPO 1 Pm eck i Cc GER GPO 3 Ei GPOJ3 EEN meee EN FW o LOA JIPOI i O k E FS GPOI4 RJHSE 5380 04 vty RNG GPO 2 fk AB AC A Area LA J us E Ai GPOIS des g Za om Lee Dk A eg No t Ae ADA IMS OM 002949 DRM Page 181 of 196 Version 1 2 Doremi Labs GPO f5 This page has been intenti
64. abel Content Feed Manager AAA AA AAA AA e gl inpwoe Advanced P Terminal Tab System m Input03 Input04 Input02 input10 Input11 Input12 Input05 Input13 Input06 Input14 Input Input15 Input08 Inputi6 Figure 79 Custom Mapping e Click on the drop down arrow to view the available mapping parameter selection for each output channel ch 01 ch 16 to select the CPL s audio channel using its label that is to be routed to the processor Figure 80 IMS OM 002949 DRM Page 83 of 196 Version 1 2 Doremi Labs L Left R Right C Center o Surround LFE Screen Ls Left surround RAs Right surround Le Left center Re Right center Ris Left rear surround Rrs Aight rear surround Cs Center surround Hl Hearing impaired VI N Narration D BOX Primary D BOX Secondary d Input 1 Input Input 3 Inputo4 Inputos InputOb InputO7 Inputod Inputog Inputio Input inputi 2 Input 3 Inputid Inputi 5 inputi Mute Figure 80 Custom Mapping Parameters 12 2 3 Audio Delay Configuration From the Administration gt Control Panel Audio Configuration Advanced tab the user can modify the delay between the audio and video by dragging the cursor to the desired delay on the graphical cursor that allows values between 200 milliseconds and 200 milliseconds Figure 81 To access the Advanced tab click on the green arrow button the right side of the GUI Figure 79 All audio tracks will be modi
65. aced The RAID sub view will present you with the RAID status Note This process will destroy the content of the drive not the RAID It cannot be undone once it has begun To replace the drive follow the steps below 14 4 1 1 Removing the Old Drive e Press on the handle to release it and open the handle all the way e Slide the drive out gently from the HDD enclosure Figure 186 IMS OM 002949 DRM Page 172 of 196 Version 1 2 Doremi Labs Figure 186 HDD Removal 14 4 1 2 Reboot Reboot the unit with just the two functioning drives in place 14 4 1 3 Inserting a New Drive e Before inserting the drive press on the handle to release it and open it all the way until it clicks e Insert the new drive all the way in the HDD enclosure at the same position as the previous drive CAUTION The drive must be inserted all the way inside the HDD enclosure BEFORE trying to close the handle Otherwise the drive might not be plugged properly e Close the handle by pushing it toward the HDD until it clicks e When the new drive insertion process has been completed the drive will automatically start rebuilding 14 4 2 Rebuild Progress The Storage tab will allow you to view the rebuild progress in the RAID Sub View after you have replaced and inserted a new disk Note When the server is rebuilding a RAID a red icon will appear to indicate that the RAID is being rebuilt The status will read as unknown until the RAID is rebuilt IMS
66. acro Automation Cue as presented above in order to be executed when GPI 1 is ON The user has the choice to program Trigger Cues to be available during the whole Show Playlist or only during a specific Show Playlist element 12 6 1 Trigger Cue Tab Overview a ocreen 0 Pe M MS1 000 Software Version Serial Number 199000 Jser Level Projection Trigger Cue OVERVIEW ADMINISTRATION CONTROL MONITORING New Wi Device Manager A 2 Delete EN Settings Trigger Ze Macro E Trigger Action Butto n Automation Cue Content Feed Manager v i Terminal 10 System m Control Panel 2 Connectto an event A Figure 103 Macro Editor Trigger Cue Tab 12 6 2 Trigger Cue Creation The Trigger Cue tab is located under Administration Macro Editor Trigger Cue Figure 103 Alternatively the user may also click on the green arrow button on the right side of the Automation Cue tab to access the Trigger Cue tab Figure 102 e To create a new Trigger Cue click the New Trigger button Figure 103 e The same type of window for the Automation Cue tab allowing the user to enter the Trigger Cue name will appear Figure 104 Trigger Settings Name of the Trigger Test Comments Figure 104 Trigger Cue Setting Window IMS OM 002949 DRM Page 104 of 196 Version 1 2 Doremi Labs Delete Button Settings Button e Enter the appropriate name It will be the name used by the CineLister application to insert the
67. acro USAS ere ek eee 108 1267 RE t EE 109 1268 EE E 109 12 6 9 Adda Trigger Cue to a Show Playlist oooocccocncconnnononncoonnnononncnonnnonnnonnnnnnnos 109 127 Content Feed MINI 111 1271 Quick ENEE enee ee Dee ee 111 AS TO O IO E 111 t273 Advanced Options Uds 112 1274 Adding a Serv r EE UE 113 12 7 4 1 Networking the Server S mreana a aa a 113 Re AVANCE ODIN Sinatra 113 12 7 5 Deleting a SENET arie ici 114 12 7 6 Ingesting from a Server That Was Acdded 114 l2 6 ee Eet 115 IMS OM 002949 DRM Page 6 of 196 Version 1 2 Doremi Labs 12 9 Log Operator Mamtenance nii n E RE A 115 1210 Account Manager E EE 116 alu AddaNew User EE ees eege ee EE 116 12 102 Editan Existing User ACCOUN sisene 118 12 10 3 Delete An Existing User ACCOUN sri 118 t211 Fheater ele 119 12 11 1 Facility Lado id 119 A eeh E EE 120 E EEN 121 l2 I3 V EE 122 13 e nd de E Taburete 124 13 1 Show Management Using CGmelister 124 a SCINCEISTOR Edtor UD ii 124 MS A oats Oe cea lita 125 T322 AdO Viua en EE 125 133 SNOW Flastra sinen a A Aaa S 126 13 3 1 How to Create a New Show PlayliSt oooomomooomomssmmsmomomns999as9 9 9so 126 193 2 Element RE NASN a 128 133231 rett BUON A 128 19322 DAVE BURON ida 128 13 4 ACCCSSING a SNOW AA VU Atos 129 13 4 1 Editing an Existing Show Playlist e 129 T342 Deleting a Show Pla taaan daa 130 1943 Element PrOD S EE 131 1344 UNEN Ple OPS di ee EE 131 IMS OM 002949 DRM Pa
68. ake up the chain of events that account for the playback of a show Using CineLister the user can create and edit SPLs e Types of elements that can be used when creating a SPL o Audio visual content e g features test content trailers live etc o Automation cues Macro automation events o Trigger cues events upon which a Macro Automation Cue is executed 13 2 2 Audio Visual Content e When the audio visual content is encrypted an icon is displayed with the content e Ss Lock icon with red button The required KDM is not available Thus the content cannot be played e O Lock icon with green button A valid KDM is available for that content and that content can be played e Timer icon with orange caution sign The required KDM is present and will expire in less than 48 hours The user is warned that they will not be able to play the content anymore after expiration of the KDM IMS OM 002949 DRM Page 125 of 196 Doremi Labs Version 1 2 13 3 Show Playlist Creation CineLister allows the user to create their own Show Playlist from the elements listed in the left pane of the Editor tab 13 3 1 How to Create a New Show Playlist Ka Screel ims 1000 net 1 remi weng Serial Number 199000 Projection OVERVIEW ADMINISTRATION CONTROL MONITORING A Refresh ER New 32 Open e Save X Properties x Delete New Li Automation Cues Schedule Dowser Open Ingest Manager HDMI Mode Content Manager kiel Element
69. aling Side Masking Figure 175 General Tab e Input The following sources are supported o Internal signal source is the IMS1000 hard drives o HDMI signal source is an external device e g BD player that connects via HDMI cable to the IMS1000 o SDI signal source is an external device that connects via SDI cables to the IMS1000 e Scaling The following masking scaling is selectable from the drop down menu o Side Masking o Top Bottom Masking o One to One 13 10 2 2 System Tab The second tab displays the networking configuration Figure 176 IMS OM 002949 DRM Page 161 of 196 Version 1 2 Doremi Labs D 1 0 re M Screen ims 1000 net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection Device Controlle OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Q CineLister gt B ject Ingest Manager La rowse Projectors Content Manager General System Colors Info Network Configuration ZA Macro Execution IP 192 168 254 246 Netmask 255 255 255 0 Gateway 192 168 254 241 Save current configuration as default Save Restore default factory configuration Restore Figure 176 System Tab The following networking configuration information is displayed o IP o Mask sub network mask o Gateway The user can modify the network configuration by inputting the desired configuration in the designated fields Root privileges are required to change the networking parameter
70. andles on the side of the IMS1000 board to secure it in the projector Figure 13 IMS OM 002949 DRM Page 30 of 196 Version 1 2 Doremi Labs Two Handles Figure 13 Securing the Board 4 2 HDDs e HDDs are to be shipped out of their chassis Upon initial installation insert them into the IMS1000 HDDs Chassis Carrier prior to powering up the projector e Do not insert or remove HDDs if the unit is powered on e HDDs are to be of the same make and model and have the same capacity e Doremi prohibits mixing SATA I drives with SATA II drives within the same RAID e Each one of the three HDDs that come with the IMS1000 will be labeled with either a 1 y or gt e The HDD labeled 1 is to be inserted into the left hand HDD slot labeled HDD 1 on the IMS1000 e The HDD labeled 2 is to be inserted into the middle HDD slot labeled HDD 2 on the IMS1000 e The HDD labeled 3 is to be inserted into the right hand HDD slot labeled HDD 3 on the IMS1000 e Each HDD has a silver latch mechanism that allows for unlatching of the drive from the hard drive cage Figure 14 A lee 3 Release HDD 2 e Lever USB IMS emi i000 A S Figure 14 Silver Latch on HDD IMS OM 002949 DRM Page 31 of 196 Version 1 2 Doremi Labs For each HDD press on the silver release lever on the front side in order to release the spring loaded HDD carrier handle With the carrier handle open insert the drive all the way int
71. arrows e Click Save when finished e The Schedule tab will be updated to reflect the recently added schedule 13 7 2 Schedule Playback Messages If a show is playing in the Playback tab and there is a time conflict with a scheduled show the user will get an alert message The message will state that there is a scheduled SPL that will start in for example 00 40 seconds and asks if the user wants to eject the current show and toggle playback in scheduled mode e o keep playing the current show click No e To stop playing the current show and allow the scheduled show to begin click Yes The server will stop playback and the show will play as it was scheduled 13 7 3 Schedule Conflict lf the user is trying to schedule playback and one already exists for the same time and date they will receive a Schedule Conflict message The Schedule Conflict message displays the time and date for which there is a conflict They will also receive the conflict message if they are trying to schedule playback that interrupts the scheduled time of another playback 13 7 4 Scheduled Show Did Not Start Error If there is an error message stating The scheduled Show below did not start as expected This can be due to several reasons Contact Doremi Labs for assistance Section 1 3 IMS OM 002949 DRM Page 140 of 196 Version 1 2 Doremi Labs 13 7 5 Show Playlist Removal To delete a Show Playlist from the schedule go to the CineLister Schedule tab
72. ault Key Delivery Message allows the KDM to be ingested from the FTP or another server registered in the netmap Composition Playlist enabled by default allows import or FTP of a CPL into the server Installation Package software security manager firmware packages for upgrades IMS OM 002949 DRM Page 113 of 196 Version 1 2 Doremi Labs e Doremi License DLM Doremi License Messages e g Dolby3D RealD 4K Enabled etc e Show Playlist click this box to be able to export and then import a SPL from one server to another e Click the Save button to save the configuration The server is now added to the Content Feed Manager network 12 7 5 Deleting a Server e Delete a server from the Content Feed Manager list by selecting it and clicking on the Delete Repository button Figure 116 This will also remove it from the Ingest Manager drop down list of servers to ingest from 12 7 6 Ingesting from a Server That Was Added e In order to ingest material restrictions are based on the Advanced Options settings on the destination unit the user will need to open the Ingest Manager application Control Ingest Manager Select the unit that was just added in the Content Feed Manager application as a source feed Figure 117 a Screen ims1000 1 ims 1000 domain net IM 1 000 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser est Se OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT ingest R
73. censes available on the unit including the expiration date and short description of the usage of the license Figure 170 To view the details of an available license click on it and the properties of the license will appear in the lower half of the screen e On this page the user is allowed to delete licenses a ocreen ims 1000 net 1 0 re M M ki 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection Delete Button OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT aa 2 Delete search GN CineLister Ingest Manager Expire on Description H 2013 04 17T00 00 00 00 00 PartialBlackout IMS Overview H 2014 01 01 700 00 00 00 00 linux 6 0 3 0 license IMS Composition Playlist H 2014 01 01T00 00 00 00 00 ramdisk rescue 6 0 8 3 license IMS Decryption Keys A 2014 01 01700 00 00 00 00 ramdisk 6 0 8 0 license IMS Show Playlist YA 2014 01 01700 00 00 00 00 firmware rescue IMS FW 4 1 3 3 license IMS H 2014 01 01700 00 00 00 00 firmware IMS PW 4 1 5 0 license IMS Device Controller YA 2014 01 01700 00 00 00 00 uboot 6 0 3 0 license IMS e Macro Execution Properties ID Not valid before Not valid after Figure 170 Licenses Tab IMS OM 002949 DRM Page 156 of 196 Version 1 2 Doremi Labs 13 9 5 1 Delete a License e Select the license from the list and then click on the Delete button Figure 170 e A Manager password will be needed to perform the deletion If
74. crypted 250 PI aybac k Device Controller Icons LOs Macro Execution remaining 00 29 50 Fast Forward and Rewind Button bp ray then Eject Figure 146 Playback Icons Elements already played are flagged using a yellow mark Elements currently being played are flagged using a green mark Elements that were not played due to an error are flagged using a red mark Elements that were skipped by the user have an orange mark Elements that have not yet been played do not have any marks next to them IMS OM 002949 DRM Page 136 of 196 Version 1 2 Doremi Labs 13 6 3 Pause Mode e Use the Pause button to pause the playback Figure 144 Note Clicking the Eject button will eject the SPL Figure 144 e Use the Next and Previous buttons to go to the next or previous CPL in the Show Playlist Figure 146 e Use the Fast Forward and Rewind buttons to forward or rewind within a CPL The default value is set at 3 minutes Figure 146 See below for instructions on how to adjust the value e Use the Play button to resume from where the CPL was last paused e Select the playback mode from the Mode drop down list Play Loop Play then rewind or Play then eject Figure 144 The user will be prompted to a password window to confirm the mode the default mode is Play SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear
75. day and time The server will automatically begin the playback of the SPLs once they have been scheduled Figure 148 Screen ims 1000 net 1 remi ms1000 Gen 2 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT New e 0 New 0 Delete Button Editor Playback Mon 25 Sun 31 March 2013 Time Show Playlist Eesen Delete Ingest Manager 16 35 18 46 Stem and Serenity Button Content Manager g Device Controller ZA Macro Execution Display out dated schedule Figure 148 CineLister Schedule Tab 13 7 1 How to Schedule Playback Go to the Schedule tab from the CineLister GUI Figure 148 The Schedule tab automatically displays the current week Click the New button Enter the appropriate password for the authentication window that might appear depending on your user level e The Edit Schedule window will appear Figure 149 IMS OM 002949 DRM Page 139 of 196 Version 1 2 Doremi Labs Edit Schedule Show Playlist Stem and Serenity Mon 18 Sun 24 March 2013 Schedule Mon Start Time Estimated ends time Figure 149 Edit Schedule Window e Select the SPL to schedule for playback from the drop down menu Use the left and right arrows to adjust the week to schedule the playback e Select the day s to schedule the playback by checking the corresponding boxes Figure 149 e Select the start time for the scheduled playback by using the up and down
76. dio volume output Playback Actions change the playback state o Video Output Actions change the default video output format o Sensio3D enable or disable the Sensio3D output format o RealD SBS enable or disable the RealD SBS output format IMS OM 002949 DRM Page 98 of 196 Version 1 2 Doremi Labs O e Macro Control o Delay insert a delay between actions o Purge Pending Macro purge the current macro execution stack e Library o Library e System o System Shutdown allows the user to shut down the player Click Cancel to stop adding an action 12 5 4 Add a GPO Action to the Macro Automation Cue e To adda GPO action highlight the desired Macro Cue e Select the General Purpose Output option which is located in the Input Output section in the Select an Action to Insert drop down menu Figure 95 e Click the Insert button e The following window will appear Figure 96 GPO Setup Line number 0 Value PULSE 100 ms e Pulse of 100 ms on the line O Figure 96 GPO Setup Window e Set the line number and value according to the usage and click the Ok button 12 5 5 Playback Action Insertion e To add a Playback Action highlight the desired Macro Cue e Select the Playback Actions option which is located in the Playback section in the Select an Action to Insert drop down menu Figure 95 e Click the Insert button e The following window will appear Figure 97 Playback Actions Choose the action Play a
77. doremi Technology Leadership for Digital Cinema IMS1000 Installation and User Manual Version 1 2 The English version of this document is the only legally binding version Translated versions are not legally binding and are for convenience only IMS OM 002949 DRM Page 1 of 196 Version 1 2 Doremi Labs Table of Contents T INTCOAUCION ini 16 deckt PUTOS ON ano 16 Le OM WAC V Cl SOI EE 16 eo CONTAC ale Ee 16 2 ESD RUS cid da 18 3 IMS1000OVOVISWissiniotianimdttancni irc 20 3 1 IMS1000 Key Features and Funchons taai e AEAEE 20 3 El JREG2000 DCGIDCP Playback 20 ce MPEG2 H264 VG1MAF Intro iia 21 3 1 3 Video processing features as 21 SA DECU e O 21 S A a aN 21 3G Alema al heess ae 21 EK E PreLoaded Test Gonna 21 Se IMPUI OULD FON St 21 3 9 Environmental Special ia 21 3 4 Performance StOrage POWER a ias 22 Be MMS An 22 30 IMS1000 Faceplate OVEVICW aos 22 4 Installation Into a NEC Series 2 Projector c cccccesseeeeseeeseeeenseceeseesensesenseseeneesonees 27 Al E O 27 TEE 31 4 3 Reattaching the Projector Coverg 33 4A Audo Cables JAS tada citada 34 IMS OM 002949 DRM Page 2 of 196 Version 1 2 Doremi Labs 4 5 GPIGPO Cables MSM MON dale 35 4 5 1 GPI GPO le ET re ed e EE 36 4 6 O AAAMOOO N 36 Ai ROW ee ee 37 d3 SNU LOW aoe AAA AA 38 5 Installation and Marriage With a Barco SerieS 2 Projector ssccsseseeseeeeeeeeeeeeneenens 40 IN FPA EE 40 D ele 42 53 Audo CADIS INS
78. e Playback tab from the CineLister GUI Figure 144 a ocreen ims 1000 net doremi wem e E Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT a A Manual Editor Pause B u tto n Schedule StEM_DCI Chinese subtitles SEM DCI Chinese sublilos Ingest Manay Sn Eject Play Content Manager remaining 01214 Button Button Device Controller oF Macro Execution remaining 001917 y aul b Wei D g Play then Eject Drop Pray Loop Down Play then Rewind Play then Eject Figure 144 Playback e Click the Play button to load the Playlist Figure 144 e f no Playlist is selected a message will appear stating The show playlist is empty Figure 145 The ShowPlaylistis empty Click on Editor to build a new ShowPlaylist Figure 145 Empty Playlist Note If a SPL contains an element with an expired KDM the SPL will not load IMS OM 002949 DRM Page 135 of 196 Version 1 2 Doremi Labs 13 6 2 Playback Progress The SPL progress list box displays the order of the playback Figure 146 a Creel ims 1000 net IMS1 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Next and Ce Previous Button Schedule HOBBIT 2D 48fps Encrypted 250Mbps MPI ns fn alae Black Ingest anager E StEM_DC Chinese subtitles WW remaining 00 29 50 Content Manage i HOBBIT 20 48fps_En
79. e prompted to enter a name for the Macro Automation Cue Figure 93 IMS OM 002949 DRM Page 96 of 196 Version 1 2 Doremi Labs Macro Settings Name of the Macro Test Comments Figure 93 New Macro Settings e Click the Ok button when done and the Macro Editor GUI will re appear e The new macro will appear in the Macro Editor Window Figure 94 a IMS1000 si Software Version 2 4 3 0 Delete Serial Number 199000 User Level Projection Settings Button OVERVIEW ADMINISTRATION CONTROL MONITORING Leen Button P Device Manager D H geg it Start Time Action Macro pS rigger Cue A Added Content Feed Manager Terminal OREG Up and el Control Panel Down Seel X Select an action to insert A Arrows Figure 94 New Macro Added e Click on Save when done creating the Macro Automation Cue Figure 94 SuperUser privileges are necessary to save the changes If the user is already logged inas a SuperUser the confirmation window will not appear 12 5 2 Editing a Macro Automation Cue e To remove delete a Macro Automation Cue select it in the Macro Editor window and click the Delete Macro button Figure 94 e To edit the name of an existing Macro Automation Cue highlight the macro and click the Settings button or double click on the Macro itself Figure 94 e Use the up and down arrows to re arrange the Automation Cues Figure 94 e Click the Save button when finished Figure 94 IMS OM 002949 DRM Page 97
80. ection A Cu e OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Ta b New Delete O Settings P Device Manager Lei Mo Start Time Action Test 00 00 00 GPO 3 Pulse at 200 ms rigger Cue 4 Up and Delete GG D Content Feed Manager SS Button i own Terminal Arrows System Control Panel General Purpose Output A insert Save Button Figure 102 Action Added IMS OM 002949 DRM Page 102 of 196 Version 1 2 Doremi Labs e Click the Save button to save the settings e Enter the password to save settings and proceed 12 5 10 Action List Management 12 5 10 1 Action Re Ordering The two arrows allow the user to change the order of the actions in the Macro Automation Cue Figure 102 Using the arrows each action can be moved to the top or to the bottom of the Macro Actions window e n order to move an action toward the top of the list select it and click on the arrow pointing to the top e lf an action needs to be moved toward the bottom of the list select it and click on the arrow pointing to the bottom e Repeat the two steps above until the required actions order is obtained 12 5 10 2 Action Edition The user can edit an action of any given Macro Automation Cue by selecting it The user will be able to edit the properties and set the action when added to the Macro Automation Cue 12 5 10 3 Action Removal e o remove an action from the list of actions associated to a Macro Automation Cue select the action in
81. efresh Q CineLister Select a location P ngest Select a location Local Storage tms Ingest Monitor IMS Upload Content Manager Device Controller O Macro Execution SPL s 0 DLM s 0 Figure 117 Ingesting e This will populate the Ingest Manager application scan tab window with all the content available for ingest from the selected source feed unit e Select the desired material to ingest IMS OM 002949 DRM Page 114 of 196 Version 1 2 Doremi Labs 12 8 Log Manager Support for this feature is forthcoming The Log Manager application can be set up to automatically upload SMPTE and System logs to designated FIP sites The log can be generated at a specific time on a daily basis and stored uploaded locally or into a remote FTP server The Log Manager application will be available in the Administration tab 12 9 Log Operator Maintenance Support is forthcoming e The Log Operator Maintenance is an application that lets the operator log important information e g hard disk replacement projector lamp replacement etc It will help the system administrator keep track of any change operated in a theater booth e The log records created with the Log Operator Maintenance application are stored for one year e The Log Operator Maintenance application will be available in the Administration tab IMS OM 002949 DRM Page 115 of 196 Version 1 2 Doremi Labs 12 10 Account Manager GUI To access the Account Manager
82. emi Labs Version 1 2 S ocreen ims 1000 net M S 1 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Delete Button Q CineLister 2 Delete Ingest Manager Name Duration Um Refresh search Stem and Serenity 02 11 12 umcuuid c7efib5a 373c 471d b754 44495c6d4717 Overview Test 02 11 17 um uvid a51a775b a3a9 4e9a afa8 cf796dd bal7 Composition Playlist Test 00 12 19 um uuid efe3c52c c69b 4654 b962 0fc0437c70d0 Decryption Keys Licenses Device Controller Zi Macro Execution Figure 168 Show Playlist Tab 13 9 4 1 Delete a SPL e Select a SPL from the list and click the Delete button Figure 168 e A manager password and confirmation will be needed to perform the operation e Confirm or deny the deletion with the pop up confirmation window by pressing Yes or No 13 9 4 2 Information e Select a SPL and click on it to get details regarding the SPL e The SPL Information window pops up and displays SPL Properties tab all CPLs in it and the Related Schedules tab Figure 169 IMS OM 002949 DRM Page 155 of 196 Version 1 2 Doremi Labs SPL Information Properties Related schedules Name Stem and Serenity Duration 02 11 12 CPL Name UUID urn uuid c6fe000d 49fd 4230 aff0 f50243021bdf urn uuid 98781194 c4bc 3042 9b08 e81bdiee3557 Figure 169 Properties Tab 13 9 5 Licenses Page e The Licenses page contains the list of all the li
83. en to open drmreport_199000_2009 12 29 tgz which is a WinRAR archive from http 10 11 26 250 What should Firefox do with this file D Open with WinRAR default Do this automatically for files like this from now on Cancel Figure 184 Detailed Report 14 3 Storage Tab The Storage tab consists of two sub views RAID Sub View and Disk Sub View Figure 185 e First the RAID Sub View which is the top half of the screen lists all the RAID builds configured on the server e Second the Disk Sub View which is the bottom half of the screen lists all the disks configured in the selected RAID IMS OM 002949 DRM Page 170 of 196 Version 1 2 Doremi Labs 1 I re M Serial Number 199000 OVERVIEW ADMINISTRATION Ka d Repair System Hardware MediaBlock Log Download 14 3 1 RAID Sub View WDC WD10QJUCT 63J6SY0 WDC WD10JUCT 63J6SY0 WNC WD10 MICT 63 16650 CONTROL Array Size 1853 09 GB 9 65 GB 931 5 GB 931 5 GB 931 5 GR MONITORING WD WX21E42HC698 WD W21E42HC167 WD WX 1F49YV311 Figure 185 Storage Tab Used Space 203 84 GB 11 197 64 MB 2 Firmware Version 01 01401 01 01401 m mam Screen ims 1000 net Software Version 2 4 3 0 User Level LOGOUT Projection SMART Status Status Status The RAID Sub View lists all the RAIDs configured in the system and the information pertaining to each such as Array device name
84. escription KDM generated for DCP2000 199000 Overview KDM generated for DCP2000 199000 Composition Playlist KDM generated for DCP2000 199000 Show Playlist KDM generated for DCP2000 199000 ow Playlist licenses KDM generated for DCP2000 199000 Device Controller ZA Macro Execution Properties ID Not valid before Not valid after Ingestion date CONTROL MONITORING Refresh kel Search Associated CPL Expire on 2K DCI Maximum Bitrate Composition e i gt Encrypted 2 1 8 6a Q 2015 12 18T00 00 00 00 00 Serenity Full Movie with Sp Subtitles i 2014 04 12100 00 00 14 00 eh Serenity Full Movie with Sp Subtitles Q 2014 04 12700 00 00 14 00 Serenity Full Movie with Sp Subtitles AN 2014 04 12700 00 00 14 00 eh STEM_400Mb_ENC_16Ch_DRM AW 2014 11 22700 00 00 00 00 Figure 167 Decryption Keys Tab 13 9 3 1 Performing a KDM Sanity Check Support for this feature is forthcoming 13 9 4 Show Playlists Page ims 1000 net S e Version 2 4 3 0 User Level Projection LOGOUT UUID um uuid 0710889c lt ac7 45b9 2277 Oda0633ct090 um uuid dDacOfc2 e275 4763 8dc7 1e838961300 um uud 6c9c744d d0c2 4be2 96ca fab71e763fb3 um uuid cc958863 650a 4e8b a215 68e3bc2fd904 um uuid a16e4293 472c 4484 b957 db6d10a79e6 e This page displays all the SPLs available on the unit together with the following information Figure 168 o SPL Duration o SPL Name o UUID IMS OM 002949 DRM Page 154 of 196 Dor
85. essage ID 0710889c cac 45b9 a277 Oda0638cf090 Message type http www smpte ra org 430 1 2006 KDM kdm key type Annotation text KDM generated for DCP2000 199000 Ingestion date Unknown Figure 162 Properties Tab e The Content tab contains the following information about the related CPL Figure 163 o CPL Title o CRL ID CPL UUID IMS OM 002949 DRM Page 151 of 196 Doremi Labs Version 1 2 KDM Information Properties Content Validation TDL CPL Info CPL title 2K DCI Maximum Bitrate Composition Encrypted 2 1 8 4g CPL ID Figure 163 Content Tab e The Validation tab Figure 164 contains precise information about the date and time of the validity of the KDM an approximation of the period for which the KDM is valid as well as Signer information subject and issuer KDM Information Properties Content Validation Yalidation Not valid before 2011 11 15T00 00 00 00 00 Not valid after Valid for 2 year s 10 month s Figure 164 Validation Tab e he TDL tab contains the list about the trusted devices projectors and their certificate thumbprints Figure 165 KDM Information Properties Content Validation TDL ID urn uuid 30ca2e13 2f31 c74e 97d3 44182bc892c2 Certificate Thumbprint Trust all Figure 165 TDL Tab IMS OM 002949 DRM Page 152 of 196 Version 1 2 Doremi Labs 13 9 2 4 Filter Tool The Content Manager allows the user to filter CPLs in the Composition Playlis
86. fied for the same delay selected After the delay has been configured click on the green Save button to save your audio delay settings Figure 81 The selected audio delay will be displayed as numeric MS milliseconds value Note The user cannot add separate delays for each track IMS OM 002949 DRM Page 84 of 196 Version 1 2 Doremi Labs LU Screen IMS1000 domain net IMS1000 elen 24340 Serial Number 199000 User Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT WW Device Manager LOs Macro Editor You can add a delay between the video and the audio Content Feed Manager e A positive value means the audio will be out few milliseconds after the video e A negative value means the audio will be out few milliseconds before the video P Terminal OS The recommended setup that matches almost all setup is 80 ms Save Button a Selected audio delay is 80 ms Figure 81 Audio Delay Via Advanced Tab e Positive Value The audio will be heard behind the video action e Negative Value Indicates that the audio is ahead of the video action The recommended value that matches almost all setups is 80 milliseconds 12 2 4 SMPTE Packages Note The audio selection should reflect the audio package in number of audio channels Change the Template Mapping setting by clicking on the list menu and selecting the desired setting Figure 82 IMS OM 002949 DRM Page 85 of 196 Version 1 2 Doremi Labs E screen IMS10
87. ge 7 of 196 Version 1 2 Doremi Labs 13 4 5 Encrypted CPL with KDM Valid more than 48 Hour 132 13 4 6 Encrypted CPL with KDM Valid less than 48 Hour 133 13 5 Play 2D Content in 83D Mode 133 192021 lt DMOde COMO Il a 133 13 5 2 How to Set the Show Playlist Mode to 3D ooooconncccnonccccocnonornnnonananorncnonanonnss 133 130 CINCLISICl FIAVDACK E WEE 134 13 621 Playback an EXIStnG SL o o ld o 134 13902 la o o a N re 136 1363 A E AN 137 13 6 4 Adjusting the Default Values EE 137 Eech Playback LOCK EE Eeer eelere 137 19 076 Playpack AICI NEIE 138 19 CINCLISTCP E EE 139 desch Howto schedule Pla Da ao eo DO dao 139 13 7 2 Schedule Playback Messages imurrae iorra rE EEEE EEE 140 Ee EE ee 140 13 7 4 Scheduled Snow Did Not Start EMO aiii cono 140 ES e PIAVISU Removal A no 141 13 7 6 Playback Recovery Due to Power Falure 141 13 7 6 1 How to Recover Plavback e 141 13 7 6 2 Shutting Down During Playback ooocooococococoonococonoocnconoonnonoooncnnoanccnannonnos 141 13997 Ee 142 SC SE WEN ele e e EE 142 BSS deck COMEN TYPOS kca A 142 13 8 1 2 Ingesting Content From A USB Drive cooooccnoccconocccocncconnnconanononncconnnonnnncnnnnononos 143 IMS OM 002949 DRM Page 8 of 196 Version 1 2 Doremi Labs 13 8 1 3 Ingesting Content from a Remote Doremi Gerveril ME 143 13 8 1 4 Ingesting Content From a Doremi Remote Server LMS ccnnoocccncccccncncnnnno 143 A eege ee ee e 144 ES
88. gure 63 Marriage Window e Click the Initiate Marriage button Figure 64 e Click the Refresh button doremi SP Device Manager ZA Macro Editor Content Feed Manager Terminal System IMS1000 Serial Number 199358 OVERVIEW ADMINISTRATION E Logout Item identifier Serial Number Version Battery Status RIC validity FPGA temperature CONTROL MONITORING Service Door Physical Mariage Logical Mamage Active Mariage Authorization ID MG Re arm Sorina 7 Initiate Marriage Figure 64 Marriage Initiated Marriage has now been completed IMS OM 002949 DRM Page 67 of 196 Doremi Labs IMS1000 domain net 2 4 3 0 Projection IMS1000 domain net 24 30 Projection Version 1 2 This page has been intentionally left blank IMS OM 002949 DRM Page 68 of 196 Version 1 2 Doremi Labs 10 Building the RAID Once the new drives have been installed you must build the RAID Go to Monitoring gt Diagnostics Storage tab to see the status of the RAID If you need to build the RAID status will be degraded and the drive status will be healthy and working online To build the RAID go to Administration Terminal and follow the steps below Type doremi and hit Enter Figure 65 Enter the password and hit Enter Contact the administrator for the password Type su and press Enter Enter the appropriate password Contact the administrator for the password a Screen IMS1000 domain net 1 re M
89. he HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries IMS OM 002949 DRM Page 12 of 196 Version 1 2 Doremi Labs WARNING THIS DEVICE MUST BE GROUNDED IMPORTANT Power requirements for electrical equipment vary from area to area Please ensure that the IMS1000 meets the power requirements in the surrounding area If in doubt consult a qualified electrician or a Doremi Labs dealer IMS1000 Power Ratings e The IMS1000 Maximum Power Consumption is up to 53W in Playback 400Mbps with 3 external USB devices attached that could draw 5V 0 5A from the IMS1000 USB ports WARNING Multiple sources of supply disconnect all sources before servicing IMS1000 Rack Mount and Thermal Information e Maximum operating ambient temperature is 40 C e Never restrict the air flow through the devices fan or vents e When installing equipment into a rack distribute the units evenly Otherwise hazardous conditions may be created by an uneven weight distribution e Connect the unit only to a properly rated supply circuit Reliable earthing grounding of rack mounted equipment should be maintained Protecting Yourself and the IMS1000 Never touch the AC plug with wet hands Always disconnect the projector from the power supply by pulling on the plug not the cord Allow only a Doremi Labs Inc dealer or qualified professional engineer to repair or reassemble the IMS1000 Apart f
90. he user is asked to select the username and password Note The server will need authentication to complete certain tasks For example the authentication required in the window above is ShowManager privileges hence the server will automatically prompt the user to the Manager username However it is possible to select a different username from the drop down list as shown in Figure 50 above depending on the level of security that has been provided IMS OM 002949 DRM Page 53 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 54 of 196 Version 1 2 Doremi Labs 7 Network Configuration 7 1 Default Network Configuration Ethernet port EthO is set to DHCP by default All IMS1000 boards are shipped from the factory with the following default IP address for Eth1 e IP 192 168 100 50 e SM 255 255 255 0 e GW 192 168 100 1 7 2 Changing the IP Address To change the IP address of the server go to the Administration Tab Control Panel Networking Configuration and then follow the steps below Figure 51 Seree Makram IMS M S 1 0 00 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Hostname Makram IMS WW Device Manager Macro Editor Ma e Properties of eth0 Properties of etht BR Content Feed Manager Obtain an IP address automatically with DHCP Obtain an IP address automatically with DHCP a Terminal e
91. highest JPEG2000 decoding formats including 4K 12 bit 4 4 4 or 10 bit 4 2 2 for 2D and 3D HFR applications The IMS1000 incorporates High Definition Multimedia Interface technology The IMS1000 accepts alternative content through HDMI inputs and live stream Movies and clips are stored on an On Board RAID5 storage The IMS1000 is controlled via Ethernet interface using a web based version of CineLister TMS2000 or third party theater management system supporting Doremi servers Ingest is done via USB eSATA or Ethernet 3 1 IMS1000 Key Features and Functions Doremi designed and manufactured Single board solution SMS and IMB on a single board High quality storage Support for local storage 4K Alternative input support is forthcoming Q3 2013 3D Live Sensio Live amp RealD Live RealD ghost busting Auro 3D audio Web based interface Support for access products Fidelio amp CaptiView Ingest through eSATA USB or Ethernet Live Support Ethernet stream Mpeg2 H264 VC1 up to 50Mbits s Scaler and Deinterlacer included GPIOSs m amp Gout SDI inputs support the following 3D mappings Dual Stream Side by Side Top Bottom Sensio HiFi 3D support is forthcoming Q3 2013 RealD 3D support is forthcoming Q3 2013 O O O O JPEG2000 DCI DCP playback Support 2K playback up to 120fps Support 4K playback up to 60fps Bitrates up to 500Mbits s DCI compliant 12Bits 4 4 4 XYZ for all formats IMS OM
92. ill be prompted to a window asking them to input the correct password SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear e After the correct password is entered the user will be prompted to name the newly created SPL Figure 133 Show Playlist available on the server Stem and Serenity Name Test Figure 133 SPL Naming IMS OM 002949 DRM Page 127 of 196 Version 1 2 Doremi Labs 13 3 2 Element Re Ordering Using the up and down arrows each element can be moved to the top or to the bottom of the Show Playlist e To move an element to the top of the Show Playlist select it and click on the arrow pointing to the top Figure 134 e To move an element to the bottom select it and click on the arrow pointing to the bottom Figure 134 ocreen ims 1000 net M S 1 0 0 0 Software Version 2 4 3 0 Open Serial Number 199000 User Level Projection B u tto n OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Di af x Open Save d Properties EN Delete S z all elements SPL Show Playlist 2D Playbar schedule intemal on Test do Pause U D and Refresh Down Ser S Pause Ingest Manager 00 00 00 Black e Button e ran Arrows Content Manager 00 00 05 StEM_DCI Chinese subtitles SE Serenity Full Movie_v3 Device Controller SIEM DCI Chinese subtitles ZE Macro Execution Pattern Black
93. inistration Device Manager e Click the New Device button e The New Device drop down window will appear Note If the user already has a projector configured through Device Manager to display subtitles meaning that the Enable subtitle file was set to Yes adding the Subtitle Engine device will cause a warning window to appear asking the user to disable all projector subtitle display The Subtitle Engine will generate the subtitle inside the picture before exporting the resulting pictures to the projector If the user plans to use the Subtitle Engine click the Yes button in the warning window to disable all projector subtitles e Select the Subtitle Engine device e The device will be visible on the main Device Manager GUI Figure 91 IMS OM 002949 DRM Page 94 of 196 Version 1 2 Doremi Labs D Tee M S1 000 Software Version 2 4 3 0 Serial Number 199000 User Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT K e Macro Editor Closed Caption ZS Device Type Subtitle Engine Projector Content Feed Manager Raw Menge Subtitle Engine eCNA SH JNior Terminal Subtitle Engine Vendor Doremi oystem Product Name IMS1000 Control Panel Process closed caption data if no subtitle content is detected Figure 91 Subtitle Engine e o complete the configuration click the Save button Figure 87 The user will be asked for a password Enter the appropriate password and press Ok IMS OM 002949 DRM Page 9
94. ion 1 2 Doremi Labs GPO e General Purpose Output for Automation Interface e RJ 45 Connector AES OUT 1 8 e Digital Audio Channels 1 8 Output e RJ 45 Connector Channels 1 8 Signal Channel 1 2 plus Channel18 2plus Channel 1 2 minus Channel 3 4 plus Channel 54 6 plus Channel 3 amp 4 minus Channel 7 8 plus Channel 7 8 minus m e A BI Channel amp 6 minus E 7 AES OUT 9 16 e Digital Audio Channels 9 16 Output e RJ 45 Connector IMS OM 002949 DRM Page 24 of 196 Version 1 2 Doremi Labs Channels 9 16 Signal Channel 9 amp 10 plus Channel3 amp 10 minus Channel 11 amp 12 plus Channel 13 14 plus HH CE E Channel138 14 minus _ E I haanelii 8 12 minus 8 Channel 15 amp 16 minus LEDs e See Figure 4 for LED placement SMLEDs HDD 1 usg HDD 2 O o ven Ms AES OUT joi O 99 GPIOOGPO 1 8009 16 Lut om au o CPU 1 4 2 LEDs SERIAL NUMBER HDMI LED SDIA 4 B LEDs Figure 4 LED Diagram For more information please refer to Section 18 IMS OM 002949 DRM Page 25 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 26 of 196 Version 1 2 Doremi Labs 4 Installation Into a NEC Series 2 Projector e Before you begin to install your IMS1000 into your projector be sure that o The projector is powered down and in the off position o Disconnect the AC power cord
95. ither the System or Security Manager database to create the log e Select the starting and ending date e Click the Create button e The log will appear To download the log highlight the log with the mouse and click on the Download icon that appears Figure 189 IMS OM 002949 DRM Page 176 of 196 Version 1 2 Doremi Labs e A window will appear asking if the user would like to save or open the log Figure 191 Make your selection and click Ok to access your log You have chosen to open log_2 xml which ts a WinRAR archive from http 10 11 26 62 What should Firefox do with this file Open with XML Editor default MM Do this automatically for files like this from now on Figure 191 Opening a Log IMS OM 002949 DRM Page 177 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 178 of 196 Version 1 2 Doremi Labs 15 Troubleshooting 15 1 RAID Not Detected If you are installing swapping HDDs from another IMS1000 each HDD must be installed in the same order as they were in the previous set up Otherwise the RAID will not be detected 15 2 Pre Loaded Test Content e The user has the ability to test the playback of the IMS1000 without having the HDDs installed To do this go to Control Cinelister Editor e The content will already be available in Cinelister under the section called Test Figure 192 e The pre loaded content is called Doremi
96. ividual files in usr share doc copyright E Content Feed Manager DI system Debian GNU Linux comes with ABSOLUTELY NO WARRANTY to the extent permitted by applicable Law Control Panel You have new mail doremi IMS1000 su Password root IMS1000 home doremi sh doremi sbin reinit_raid sh Figure 66 Terminal Command e Amessage will appear informing you that you have ten seconds to cancel the operation Figure 67 El Screen Makram IMS Uu S 1 0 0 0 So e Versio 2 4 3 0 Serial Number 199000 User Leve Administrator OVERVIEW ADMINISTRATION CONTROL MONITORING LED LEER Device Manager ur WARNING Macro Editor 11 You are going to perform an operation that changes the configuration of the disks RAID This operation does result in loss of data SR Content Feed Manager FT II To cancel the operation hit CTRL C now 10 System ryt The procedure will automatically start in 10 seconds Control Panel PEELE Rae Pee heathen eben ee hee eee PEPER 199876543721 Detecting current RAID size gt gt Enter raid size default is 1 1 gt Checking disk status Shutting down services Figure 67 Warning Message The building process will now begin The unit will restart Select ok to log out of the session After 5 to 10 minutes you will be allowed to log back into the GUI Go to Monitoring Diagnostics Storage tab to see the progress of the RAID building For more informa
97. l M S 1 0 00 So gt Version 243 0 Serial Number 199358 User Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT IMS1000 domain net login doremi Password Device Manager Last login Thu Nov 17 08 22 04 PST 2011 from 172 17 20 71 on pts 0 e B ss Linux IMS1000 domain net 2 6 35 1 SMP PREEMPT Thu Feb 7 14 23 43 CET 2013 i686 vIacro itor The programs included with the Debian GNU Linux system are free software the exact distribution terms for each program are described in the FI individual files in usr share doc copyright BD Content Feed Manager system Debian GNU Linux comes with ABSOLUTELY NO WARRANTY to the extent permitted by applicable law E Control Panel You have new mail doremi IMS1000 su Password root IMS1000 home doremi J Figure 65 Terminal Log In e Type sh doremi sbin reinit_raid sh and hit Enter Figure 66 IMS OM 002949 DRM Page 69 of 196 Version 1 2 Doremi Labs E IMS1 000 Screen 1M51000 domain net Software Version 2 4 3 0 Serial Number 199358 User Level Administrator OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT 1MS1000 domain net login doremi Password Device Manager Last login Mon Apr 1 12 25 53 PDT 2013 from 10 1 0 235 on pts 1 e vw Linux IMS1000 domain net 2 6 35 1 SMP PREEMPT Thu Feb 7 14 23 43 CET 2013 i686 The programs included with the Debian GNU Linux system are free software the exact distribution terms for each program are described in the F ind
98. ly 12 3 6 1 Dolby 3D Support e To enable the Dolby 3D support please contact Doremi Labs Technical Support to receive the appropriate license Section 1 3 IMS OM 002949 DRM Page 93 of 196 Version 1 2 Doremi Labs 12 3 6 2 RealD 3D Support To enable the RealD 3D support please contact RealD at cinema support reald com to receive the appropriate license Once the license has been received follow the steps below Open the Device Manager GUI by clicking on Administration Device Manager Click the New Device button Select the RealD 3D EQ The device will be visible on the main Device Manager GUI To complete the configuration click the Save button Figure 87 Enter the appropriate password and click Ok 12 3 6 3 Sensio 3D Support e To enable the Sensio 3D support please contact Doremi Labs Technical Support to receive the appropriate license Section 1 3 12 3 7 Closed Caption Support e To enable the Rear Window devices Closed Caption support install the appropriate license For information about the Closed Caption Support contact Doremi Labs Technical Support Section 1 3 12 3 8Subtitle Engine Configuration This section provides instructions on how to set up the Device Manager for Subtitle Engine support It will allow the user to generate subtitles into the picture before being exported to the projector Once the license has been received follow the steps bellow e Open the Device Manager GUI by going to Adm
99. mat IMS OM 002949 DRM Page 185 of 196 Version 1 2 Doremi Labs The behavior of the SM1 and SM2 LEDs is the following Green SM operational Any SM in FIPS lock different color of SM2 can indicate the reason for Fips lock To Be Defined The behavior of the SM3 and SM4 LED is the following ae Ia aan Orange Red Service Door is open Marriage is not activated Marriage is initialized armed but marriage not verified Green Marriage is not initialized armed service door and physical marriage are ok ready to marry Red Marriage is not activated physical marriage is currently broken IMS OM 002949 DRM Page 186 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 187 of 196 Version 1 2 Doremi Labs 19 Appendix D HDMI Inputs Supported Formats Video VGA 60 480p 60 576p 50 720p 50 59 94 60 1080p 23 98 24 25 29 97 30 47 95 48 50 59 94 60 2kp 23 98 24 1080p 23 98 24 25 29 97 30 Audio 32 kHz 44 1 kHz 48 kHz 88 2 kHz 96 kHz Note HDMI Audio data rate is not converted when processed through the IMS1000 Make sure your audio processor supports the audio format encoded on the disc you are playing back IMS OM 002949 DRM Page 188 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 189 of 196 Version 1 2 Doremi Labs 20 Appendix E SDI Supported Formats 20 1 Video Single Link e
100. mi Labs 5 8 Shut Down In order to properly shutdown the IMS1000 board and the Barco projector the user must follow the steps below e To shut down the board go to Administration System Figure 47 a Screen ims1000 1 ims 1000 domain net M 1 000 Software Version 24 30 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Shutdown Button WW gt Manager e To restart the system click the Restart button You will be automatically disconnected from the web interface i Se e To shutdown the system click the shutdown button Os Macro Editor Content Feed Manager T 1 Terminal m Control Panel Figure 47 Shut Down e Click on the Shutdown button and wait two minutes The LED lights on the IMS1000 will stop flashing and the HDD lights will have a steady light once it has finished shutting down e After two minutes refer to the projector manufacturer manual for proper power down sequence to shut down the projector e The IMS1000 board and the projector have now been properly shut down Warning The IMS1000 must be shut down according to the designated method Failure to follow the above method may result in file corruption IMS OM 002949 DRM Page 50 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 51 of 196 Version 1 2 Doremi Labs 6 Operating System Every time the user logs out of the operating system and then logs
101. mi Labs e Goto Administration Control Panel Time Settings and the Date and Time tab will appear e Click on one of the appropriate boxes to modify Hours Minutes or Seconds e For each box a list of time settings will appear Figure 56 a Screen Makram IMS i remi wem Gen D Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT SP Device Manager Current Date Tue 26 March 2013 to Macro Editor NT P Content Feed Manager Current Time 11 30 08 S ervers F Terminal Tab System A y EEN 7 EN y Update ol S Angeles Update Button Figure 56 Change Time Drop Down Window e Once the appropriate time change has been selected and appears within the box labeled Change Time click the Update button to save this setting e SuperUser privileges are necessary to save the change e f you exceed your allotted 6 minute limit contact your first tier support representative IMS OM 002949 DRM Page 61 of 196 Version 1 2 Doremi Labs 8 4 NTP Servers NTP Network Time Protocol Servers are specific servers that sync the time and date on your unit to the UTC time To access the NTP Servers tab click on the green arrow button on the right side of the Date and Time tab found by going to Administration Control Panel Time Settings Figure 56 Click the Add button to add your NTP server Figure 57 d M P Servers OVERVIEW ADMINISTRATION CONTROL MONITORING LOGO
102. minal RJRight ch10 Mute oystem C Center ch11 Mute LFE Screen chi2 Mute Ls Left surround ch13 Mute Rs Right surround ch14 Mute Lc Left center ch15 Hl Hearing impaired ch 08 Rc Right center ch16 VI N Narration Figure 75 Audio Mapping Set to Eight Channels 12 2 2 5 Nine Channels This configuration is defined as follows Figure 76 Ch 01 is Left L Output ch 01 will be playing the CPL s Left L audio channel Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel Ch 04 is LFE Screen Sub Woofer Output ch 04 will be playing the CPL s LFE Screen Sub Woofer audio channel Ch 05 is Left Surround Ls Output ch 05 will be playing the CPL s Left Surround Ls audio channel Ch 06 is Right Surround Rs Output ch 06 will be playing the CPL s Right Surround Rs audio channel Ch 07 is Left Center Lc Output ch 07 will be playing the CPL s Left Center Lc audio channel Ch 08 is Right Center Rc Output ch 08 will be playing the CPL s Right Center Rc audio channel Ch 09 is Center Surround Cs Output ch 09 will be playing the CPL s Center Surround Cs audio channel Ch 10 Ch 14 These channels are pass through meaning the output channel X will be playing the CPL s audio channel X X will be a value between 10 and 14 Ch 15 is HI Output ch 15 will be playing the C
103. n A ua wn e impaired narrative audio escription Right center Left rear surround Right rear surround Synchronous signal currently used by D Box Unused af this time Unused at firs time Unused af this time a Air Le CH L oton Data a E 2 JU CSS Figure 83 ISDCF Interop Recommendations IMS OM 002949 DRM Page 87 of 196 Version 1 2 Doremi Labs 12 3 Device Manager The Device Manager is an application used to configure the connection between a unit and cinema projector s It also provides for the use of Ethernet commands for the control of theater automation devices e Torun the Device Manager go to Administration Device Manager e The following window will appear Figure 84 IMS1000 domain net Screen M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT gt New Delete SP Device Manager EL co Editor PROJECTOR New Butto n S Content Feed Manager E Terminal OS onl Figure 84 Device Manager 12 3 1 Adding a Projector To connect a projector to the unit server click the New button Figure 84 e The New Device drop down menu window will appear Figure 85 Figure 85 Add Device Drop Down Window e Select Projector The following window will appear Figure 86 IMS OM 002949 DRM Page 88 of 196 Version 1 2 Doremi Labs a Screen IMS1000 domain net doremi I
104. n ims1000 1 ims 1000 domain net M S 1 0 00 Software Version 243 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT de New de Delete WW Device Manager Macro Editor Login Full Name 4 Content Feed Manager Sal T 1 Terminal doremi O system ingest i Figure 121 Account Manager GUI New User Added 12 10 2 Edit an Existing User Account e To edit an existing user account select it within the Account Manager GUI e The following dialog box will appear allowing the user to edit the user properties but not the username or the login type Figure 122 Edit User Full Name est Group Inactives Login Type Virtual Set password Figure 122 Account Manager GUI User Properties Editing e Click the Save button when finished editing the settings e Click the Close button when finished with the configuration 12 10 3 Delete An Existing User Account e To delete an existing user account select it within the main Account Manager GUI and click the Delete button Figure 118 e The user will be asked for a confirmation Clicking OK will delete the user account Figure 123 IMS OM 002949 DRM Page 118 of 196 Version 1 2 Doremi Labs Do you really wart to delete Test ox L com Figure 123 User Account Deletion Confirmation 12 11 Theater Properties The Theater Properties tab allows the user to specify theater properties such as the facility name addre
105. n 1 2 Doremi Labs 12 7 Content Feed Manager The main purpose of the Content Feed Manager application is to add an FTP ingest source In addition multiple units can be interconnected to share content simultaneously The Content Feed Manager makes the ingestion process quicker and simpler 12 7 1 Quick Configuration e To open the Content Feed Manager application go to Administration Content Feed Manager Figure 114 Screen ims1000 1 ims 1000 domain net M 1 000 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT gt New Delete SP Device Manager Macro Editor iims 1 identifier tms 4 ingest Protocol FTP P Terminal Server IP 10 11 21 30 Di System Username manager Password m Control Panel Remote Path Advanced options Figure 114 Content Feed Manager GUI 12 7 2 Scan for Server Support for this feature is forthcoming e The Scan for Server button will check and see if any servers are present on the network IMS OM 002949 DRM Page 111 of 196 Version 1 2 Doremi Labs 12 7 3 Advanced Options Button u creen ims1000 1 ims 1000 domain net M S 1 0 00 Software Version 243 0 serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT e New Delete WW Device Manager A Edi ms s LOs Macro Editor tms Identifier H Ingest Protocol FTP P 1 Terminal Server IP 10 11 21
106. ng automation and trigger cue definitions then copy it into the doremi etc folder and the corresponding macros will be visible in the Macro Editor GUI The user will then be able to update the cues if needed from the Macro Editor GUI IMS OM 002949 DRM Page 108 of 196 Version 1 2 Doremi Labs 12 6 7 Default Cues The default_cues xml file can be used to load an automation and trigger cues playlist prior to any playback This is to avoid having to add a Fire Alarm trigger cue to each show If the user is provided a default_cues xml file copy it into the doremi etc folder 12 6 8 Startup Scripts e Copy the script to be executed automatically at boot in the following folder doremi etc rc d 12 6 9 Add a Trigger Cue to a Show Playlist e Goto the CineLister application Control tab CineLister e Inthe Editor tab open the desired SPL by clicking the Open button and selecting the SPL from the list of available playlists Figure 111 e Select a Trigger Cue on the left part of the GUI and click on it Figure 111 EI Screen ims1000 1 ims 1000 domain net M S 1 0 00 Software Version 243 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT e Ref mM Y z gt resh New Open Save d Properties 3 Delete e SPL Show Playlist 2D all elements A KSE Open Schedule Automation Cues Button Ingest Manager Content Manager Device Controller Macro Execu
107. ngest The user is allowed to ingest content o Projectionist Projectionist is a standard user allowed to use the Doremi applications present on the unit without changing the configuration o Show Manager In addition to Projectionist s privileges a Show Manager user is allowed to ingest and delete content o SuperUser In addition to Show Manager s right a SuperUser has the privileges to configure the unit and to create modify and delete user accounts For example the SuperUser can update the firmware and software It will also be considered a root user Add User Login Full Name Group Inactives Login Type Ingests Projectionists Password ShowManagers SuperUsers Save Confirm Button Figure 120 Account Manager GUI Privileges Definition e Furthermore two different login types are available for the user o Application Virtual user account only works with Doremi applications o System Regular Linux user account that can be used anywhere on the system For example on Linux terminal windows e Define the password by typing the desired password Note The user will be provided information about the strength of the chosen password Confirm the password in the Confirm field e Click the Save button to save the new user Figure 120 e The new user account will be visible in the main Account Manager GUI as illustrated below Figure 121 IMS OM 002949 DRM Page 117 of 196 Version 1 2 Doremi Labs Scree
108. nly modify the time up to 6 minutes per calendar year e Network Configuration Setup and modify network connections e Marriage Tool Allows the user to perform projector marriage e Theatre Properties Allows the user to input information necessary for KDM management e Accounts Manager Allows the user to add remove edit user accounts IMS OM 002949 DRM Page 74 of 196 Version 1 2 Doremi Labs e Log Operator Maintenance Allows the user to log important information e g hard disk replacement projector lamp replacement etc This application helps the system administrator keep track of any change operated in a theater booth 12 1 Audio Configuration Channel Mapping The Audio Configuration application allows the user to route all audio tracks in an SMPTE Interop package to operator designated outputs The main purpose of the mapping is to allow users to move the HI or VI channels to a specific output The Audio Configuration application is available in the Administration tab e To open the Audio Configuration application go to Administration Control Panel gt Audio Configuration Figure 70 a Screen 1M51000 domain net MV S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT WW Device Manager GE Template Mapping Disabled Macro Editor S channel Label Content Feed Manager E Termin 10 System Template Mapping
109. o 2 alo leie LLO EE 145 19 9 Ee Ee 145 STA e EE 146 13 92 GOMPOSITIOMPIAVIISIS PAGS e o oo ada 147 SL ACOS DUO ondo tdo cos oo 147 13922 O E 147 Mtl tel du EL EE 148 139231 Properties Tabs 148 EC EE e EE 148 PS PE EE 149 LS Ee gt Jere ee ra Nr Se 150 gle SJ ee E 153 13 9 3 Decryption Keys Pa s ii 153 13 9 3 1 Performing a KDM Sanity Check 154 e ES AS o oo o PPP ee ee eee 154 Boar O TE a A Sn O 155 ES A awtiaacsanstenedeotodass edd cdsewettancaaustoneceentedicacoste 155 1339 5 Licenses PAGS a 156 W391 Delete e Eosen aa E E N N 157 13 960 AQUI a LICENSE mrii o LDL 157 13 9 7 Licenses Available Managed Through Doremi License Control DLM 158 13 10 eege e 159 IMS OM 002949 DRM Page 9 of 196 Version 1 2 Doremi Labs 13 10 1 How to Configure the Device Controller GU 159 19 102 Registered TAD o EDO 160 noz General Tabaco ara 160 EI eee leer ee me ce eee eran ee ee ae eee eee 161 131023 GOO E E 162 13 10 2 3 1 HDMI Color Space Setting S miseire o N 163 15 10 2 3 2 HDSDIGol r Space Settings airnn A 163 e kO E2 Nu ME e PERO CPP e e A ee ee 164 SS MANDA E a a Lo 164 A EE 166 14 Monitoring VAD O 168 E EE 168 AZ eg E ad O 169 14 2 1 Detailed Report Cverview NEEN 169 e GE EE 170 ir ire Do o E en E 171 Adal ANAWZO A 172 WARS E2 DIS oia a 172 Midas Repa aa a A A 172 14 31 4 Re initlalizecay E RE 172 144 EE 172 E Se Degraded KE E 172 14 4 1 1 Removing the Old Dri
110. o channel Ch 07 is Input Ch 07 is pass through meaning the output channel X will be playing the CPL s audio channel X Ch 08 is Input Ch 08 is pass through meaning the output channel X will be playing the CPL s audio channel X Ch 09 is Center Surround Cs Output ch 09 will be playing the CPL s Center Surround Cs audio channel Ch 10 Ch 14 These channels are pass through meaning the output channel X will be playing the CPL s audio channel X X will be a value between 10 and 14 Ch 15 is HI Output ch 15 will be playing the CPL s Hearing Impaired HI audio channel Ch 16 is VI Output ch 16 will be playing the CPL s Narration VI audio channel IMS OM 002949 DRM Page 78 of 196 Version 1 2 Doremi Labs a Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 43 0 Serial Number 199000 User Level Projection Content Feed Manager f Terminal R Right 0 System OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Y Device Manager gt Template Mapping 7 channels ef Macro Editor Channel Label Channel Label ULeft Cs Center surround Mute C Center Mute LFE Screen Mute Ls Left surround Mute Rs Right surround Mute Mute Hi Hearing impaired Mute VI N Narration Figure 74 Audio Mapping Set to Seven Channels 12 2 2 4 Eight Channels This configuration is defined as follows Figure 75 Ch 01 is Left L Output ch 01 will be playing the CPL s Lef
111. o the chassis cage Figure 15 Spring Loaded HDD Carrier Handle Figure 15 HDD Insertion Close the silver HDD carrier handle until you hear an audible click and the release tab has locked the HDD into place e Repeat for the other two HDDs The HHDs properly installed will look like the image presented below Figure 16 8 AES OUT Figure 16 HDDs Inserted IMS OM 002949 DRM Page 32 of 196 Version 1 2 Doremi Labs 4 3 Reattaching the Projector Covers e Reattach the projector cover and screw in the four screws holding it in place Figure 17 Figure 17 Reattaching the Projector Cover e Turn the key to lock the projector in place Figure 18 Figure 18 Turning the Lock e Reattach the filter cover by gently pushing it into place Figure 19 IMS OM 002949 DRM Page 33 of 196 Version 1 2 Doremi Labs Figure 19 Reattaching the Filter Cover 4 4 Audio Cables Installation Y AES OUT 9 16 car T COME T 9 16 1 2 34 o ee Figure 20 Audio Connectors e Plug one shielded CAT5 or CAT6 cable end into the connector labeled AES OUT 1 8 on the IMS1000 board Figure 20 e Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor e Take another shielded CAT5 or CAT6 cable and plug the end into the connector labeled AES OUT 9 16 Figure 20 e Plug the other end of the shielded CAT5 or CAT6 cable into the audio processor Note If the audio processor
112. olors Info ZE Macro Execution Identification Version IMS FW 4 1 4 0 Figure 178 Info Tab e Use the Refresh button to refresh information about the controlled device e Click Quit to exit the application 13 10 3 Manual Tab If the device is created manually in the Manual tab Figure 179 then it will be temporary and will be lost once the application is closed or the unit rebooted IMS OM 002949 DRM Page 164 of 196 Version 1 2 Doremi Labs doremi GN CineLister Ingest Manager Content Manager Macro Execution Screen ims 1000 net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT ma Browse Projectors e This application can be used to monitor or control external devices e To select the device to control click on Browse Projectors Registered Manual Image Media Block 192 168 10 20 43751 Figure 179 Manual Tab e The following information is required to configure the device manually O Device Name It is recommended that the user use a relevant name o Device Type Click on the arrow for the list of supported devices IP Address IP address of the device to control Port This information is automatically populated after choosing the Device Type o IMB Port Number 43751 Note Ethernet port EthO is set to DHCP by default All IMS1000 boards are shipped from the factory with the following defa
113. on of the Raw device Figure 90 Input the name of the Raw device in the Identifier field Page 92 of 196 Version 1 2 Doremi Labs a Scree M S1 000 Software Version 2 4 3 0 Serial Number 199000 ker Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING s0 New Delete ZA Macro Editor Closed Capt Device Type Raw j r Projet FF Co ont Feed Manager aw EE ZS Sam Dei New _ Terminal ss Engine endor Unknown Button OREGI Unknown fell Control Pane a Delete Button Figure 90 Device Manager GUI Raw Device Configuration e Specify a vendor name in the Vendor field e Specify a product name in the Product Name field e Enter the IP address of the Raw device in the Device IP field e Choose the protocol to be used TCP or UDP and the proper Port number e Click the Save button to record the settings Figure 90 A window will appear asking for a password Enter the password to proceed SuperUser privileges are necessary to confirm the changes If the user is already logged in with SuperUser privileges the password confirmation window will not appear 12 3 5 1 Removing a Raw Device e o remove the Raw device click on it in the Device Manager GUI and press the Delete button Figure 90 12 3 6 3D Configuration e When using an IMS1000 configuration for 3D presentation the projector needs to be set to the proper color space Contact the projector vendor to configure the projector proper
114. onally left blank IMS OM 002949 DRM Page 182 of 196 Version 1 2 Doremi Labs 17 Appendix B General Purpose Input Connection Diagram 3 3V GPI INTE RFACE Typical Application A Ra2 a s 5V up to 24V og GPIO ii 10 uo CE 5V 3 3V 4 e SS poo LTV 5465 gt 7 dl ox G IMS1000 7 GPI 1 Ci WW us EN G Pl Each general purpose input will turn on if you feed BE y E a current between 4mA and 40mA which corresponds to voltages between 5V and 24V LTV 6465 S4ELD 73 R40 t4 IW LL PL o 4 u29 LTV 6465 DATE GPI 3 12 ui dr LTV 4468 IMS OM 002949 DRM Page 183 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 184 of 196 Version 1 2 Doremi Labs 18 Appendix C LED Behavior Front Panel LED specification SM LEDs O HDD 1 RK i 7 2 9 HDD 3 AES OUT e 1 ETH 0 gt O eSATA O Ee ue en GPO 1 8 009 16 E 12 34 CPU 1 4 2 LEDs SERIAL NUMBER HDMI LED SDIA 4 B LEDs Figure 193 Front Panel LEDs The behavior of the CPU LEDS is the following CPU1 CPU2 State of the IMS1000 CPU Green CPU operational without warning error Orange Standby Orange Off CPU operational but with warning non specific Off CPU cannot play due to ERROR non specific The HDMI LED behavior is the following No HDMI signal detected Green HDMI detected with supported format Orange HDMI detected with un supported for
115. or will be automatically detected by the Device Controller application when added to the network e The following parameters are shown in the Registered tab for the device Name Type IP Port e The Port number is automatically populated Please do not alter this field e Select the device to control and then click on it The Device Controller window will display four tabs that will allow the user to configure control and manage the device Figure 174 O O a Screen IMS1000 ij re iil Vi S 1 0 0 0 Software Version 2 4 34 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT kend Browse Projectors Gi CineLister Ingest Manager i P e This application can be used to monitor or control external devices Content Manager e To select the device to control click on Browse Projectors ZE Macro Execution Registered Manual Name e IP Port Certainty 42 0 0 1 43751 Figure 174 Registered Tab 13 10 2 1 General Tab The first tab displays and controls the input source and scaling Figure 175 IMS OM 002949 DRM Page 160 of 196 Version 1 2 Doremi Labs w Screen ims 1000 net N S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Go CineLister e B ject Ingest Manager BPR Browse Projectors Content Manager General System Colors Info e Macro Execution Input Internal Sc
116. ot occurred Figure 43 Figure 43 Tamper Errors e To begin the marriage process push the Key button It should be red to indicate that the marriage has not been completed Figure 44 Key Button Figure 44 Red Key Button e After you push the Key button the numbered buttons should flash orange IMS OM 002949 DRM Page 48 of 196 Version 1 2 Doremi Labs Enter in the correct password Contact your administrator for the correct password The numbered buttons should flash green if you have entered the password correctly Allow about a minute for the tamper errors to clear Once the marriage has been completed the Key button will turn green and the taillight will also turn green Key Button Figure 45 Green Key Button To ensure that the marriage was completed correctly on the IMS1000 GUI go to Monitoring gt Diagnostics Media Block The Security Manager section should appear as it does below Figure 46 E Screen ims 1000 net M S 1 0 00 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Projector Media Decoder System Model Dees 2 Video Watermark Doremi 0 2 Storage Hard ware Log Download Security Manager Section Figure 46 Security Manager Section Once marriage has been completed the Barco projector will be automatically detected in the Device Manager IMS OM 002949 DRM Page 49 of 196 Version 1 2 Dore
117. ow will appear with the KDM information The window will indicate that the KDM is available and its end date Figure 140 IMS OM 002949 DRM Composition Playlist Properties UUID Content Title Content Kind Duration Picture Encoding Rate Sound Channels Quantization urn uuid 6b319755 007d 3240 b2c0 ec2dbaacffd2 Madagascar Feature 01 25 59 MPEG2 1920 x 1080 241 6 24 bits KDM available Figure 140 Encrypted KDM Page 132 of 196 Version 1 2 Doremi Labs 13 4 6 Encrypted CPL with KDM Valid less than 48 Hours If the element selected is encrypted and the KDM is available but will expire in less than 48 hours the text in the KDM information screen will be orange and the remaining time will be displayed Note All KDMs will automatically be removed from the server upon expiration 13 5 Play 2D Content in 3D Mode 13 5 1 3D Mode Configuration The user can play 2D content within a 3D ShowPlaylist Changing the mode of the SPL to 3D does not automatically make the content 3D The content must be in 3D 48fps format to create a 3D SPL 13 5 2 How to Set the Show Playlist Mode to 3D e Click the Show Playlist Properties button Figure 136 e Select the 3D mode from the Display Mode drop down window Figure 141 ShowPlaylist Properties Name Test Display Mode 3D 2D Duration 3D 4K Figure 141 Display Mode Drop Down e Click the Close button e The Show Playlist Prope
118. rack will be routed to audio output number X variable of the server X being a number between 1 and 16 When the configuration is grayed out the user cannot change the configuration Figure 71 a Screen IMS1000 domain net 1 re M MV S1 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Device Manager e Template Mapping Disabled LOs Macro Editor Channel Label A Content Feed Manager a Terminal 0 System Cor Figure 71 Disabled Configuration 12 2 2 Pre Defined Mapping Configurations 12 2 2 1 Four Channels This configuration is defined as follows Figure 72 e Ch 01 is Left L Output ch 01 will be playing the CPL s Left L audio channel e Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel e Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel IMS OM 002949 DRM Page 76 of 196 Version 1 2 Doremi Labs Ch 04 is Input Ch 04 is pass through meaning the output channel X will be playing the CPL s audio channel X Ch 05 is Surround S Output ch 05 will be playing the CPL s Surround S audio channel Ch 06 Ch 14 These channels are pass through meaning the output channel X will be playing the CPL s audio channel X X will be a value between 6 and 14 Ch 15 is HI Output ch 15 will be playing the CPL s Hearing Impaired
119. rom voiding the warranty unauthorized engineers might touch live internal parts and receive a serious electric shock Do not put or allow anyone to put any object especially metal objects into the IMS1000 Use only an AC power supply Never use a DC power supply lf water or any other liquid is spilled into or onto the IMS1000 disconnect the power and call a Doremi dealer The unit must be well ventilated and away from direct sunlight To avoid damage to internal circuitry as well as the external finish keep the IMS1000 away from direct sources of heat heater vents stoves radiators Avoid using flammable aerosols near the IMS1000 They can damage the surface area and may ignite Do not use denatured alcohol paint thinner or similar chemicals to clean the IMS1000 This can damage the unit Modification of this equipment is dangerous and can result in the functions of the IMS1000 being impaired Never attempt to modify the equipment in any way In order to ensure optimum performance of the IMS1000 select the setup location carefully and make sure the equipment is used properly Avoid setting up the IMS1000 in the following locations IMS OM 002949 DRM Page 13 of 196 Version 1 2 Doremi Labs In a humid or dusty environment In a room with poor ventilation On a surface which is not level Inside a moving vehicle where it will be subject to vibration In an extremely hot or cold environment Removable Drives Warning Removal of the
120. rties button will reflect the name of the SPL and what mode it is set to Figure 142 IMS OM 002949 DRM Page 133 of 196 Version 1 2 Doremi Labs E Screen ims 1000 net N S 1 00 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT mr SR gt e Open Save b Properties Delete all elements SPL Test 3D Playback Dowser Open S Schedule 00 00 00 SM D I Chinese subtitles HDMI Mode 2 lt Ingest Manager 00 12 17 Serenity Full Movie v3 Internal Content Manager Pause 00 12 22 Flat Start Device Controller 02 11 12 Black Serenity Full Movie_v3 ZG Macro Execution SIEM D Chinese subtitles Start Time Elements Figure 142 SPL Set to 3D Note In 3D or 48fps mode the IMS1000 video output is in the YCxCz color space The projector itself needs to be properly configured to the YCxCz color space in 3D or 48fps mode for proper display Contact the projector vendor to configure the projector properly or see the section Device Manager 13 6 CineLister Playback Tab 13 6 1 Playback an Existing SPL e Click on the Open button from the CineLister Editor tab Figure 142 e The following window will appear Figure 143 Show Playlist available on the server Stem and Serenity Test Figure 143 Open SPL Window IMS OM 002949 DRM Page 134 of 196 Version 1 2 Doremi Labs e Select the SPL to play and click OK e Next go to th
121. s Device Controller Pause Feature EI Macro Execu gt R Serenity Full Movie v3 SIEM_DCI Chinese subtitles Pattern Black Black 30 Black3D 48 Start Time Elements Figure 131 Editor Tab e Click on the New button from the CineLister Editor tab Figure 131 e Click on the elements to add to the SPL from the left pane of the GUI Figure 131 e The element s will appear in the right pane Figure 132 IMS OM 002949 DRM Page 126 of 196 Version 1 2 Doremi Labs Sereen ims 1000 net NN S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection 1 remi Editor OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT S ave oil i SZ Es at Save K Properties Delete g chedule Pla back E gt Button Ml available element ho is Delete Playback all elements SPL Show Playlist 2D Element schedule Internal on Test do Pause Ingest Manager 00 00 00 Black Feature Content Manager 00 00 05 aM DCI Chinese subtitles Serenity_Full_ Movie_v3 Lae S P L StEM_DCI Chinese subtitles Window E Macro Execution Pattern With Black Device Controller Elements Added Black 3D Black 3D 48 Trigger Cues Fire Trigger Test Start Time Elements Figure 132 Elements Added e To remove an element in a Show Playlist select it in the Show Playlist window and click the X that appears on the right Figure 132 e Click on the Save button Figure 132 The user w
122. s Now it will be possible to change the IP mask or Gateway Click Save to confirm the changes These changes take immediate effect and they expire when you reboot the unit being replaced by the default networking configuration You can save these settings as default by pressing the Save button These configurations will be effective even after a reboot To restore the networking configuration to factory default click on the Restore button The factory default settings are o IP 192 168 254 246 o Mask 255 255 255 0 o Gateway 192 168 254 1 Make sure to click the Save button when finished setting the network configuration 13 10 2 3 Colors Tab The third tab called Colors allows the user to modify the color space for HDMI and HDSDI inputs Figure 177 IMS OM 002949 DRM Page 162 of 196 Version 1 2 Doremi Labs x Screen ims 1000 net NV ki 000 software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Go CineLister ram Browse Projectors Ingest Manager A y Content Manager General System Colors HDMI ZA Macro Execution HDMI Input Color Space Auto HDMI Input Degamma Rec709 HDSDI HDSDI Input Color Space YCbCr709 HDSDI Input Degamma Rec709 HDSDI Input Mode 2D 4 4 4 dual link Figure 177 Colors Tab 13 10 2 3 1 HDMI Color Space Settings e HDMI Input Color Space Click on the arrow on the drop down menu and select the de
123. s tab that will show all the names of the CPLs inside that SPL Figure 160 e The second tab of the SPL information window displays the related schedules IMS OM 002949 DRM Page 149 of 196 Doremi Labs Version 1 2 CPL Information Properties Assets SPL s KDM s Name UUID Stem and Serenity urn uuid c7effb5a 373c 471d b754 f4d95c6d4717 Test urn uuid a51a775b a3a9 4e9a afa8 cf796ddfbal 7 Figure 159 SPL s Tab SPL Information Properties Related schedules Name Stem and Serenity Duration 02 11 12 CPL Name UUID urn uuid c6fe000d 49fd 4230 aff0 f5024302 1 bdf urn uuid 98781194 c4bc 3042 9b08 e81bdiee3557 Figure 160 SPL Information Window 13 9 2 3 4 KDM s Tab e This tab will display the UUID and Validity of each KDM for the concerned CPL Figure 161 IMS OM 002949 DRM Page 150 of 196 Version 1 2 Doremi Labs CPL Information Properties Assets SPL s KDM s UUID alidity urniuuid S83a0c8c 05ac 4aa0 834f 9724ee7b9339 Figure 161 KDM s Tab e Select a KDM and click on it This will take the user to the KDM Information window Properties tab e The Properties tab displays the following information about the selected KDM Figure 162 o Message ID KDM UUID o Message Type MessageType field of the KDM o Annotation Text Annotation Text field of the KDM O Ingestion Date Date on which the KDM was ingested into the server KDM Information Properties Content Validation TDL M
124. sired color space standards from the list o Auto o YCbCr709 o RGB709 o YCxCz XYZ O e HDMI Input Degamma Click on the arrow on the drop down menu and select the desired degamma factor from the list o Rec709 o DCI o Custom Choose the desired degamma factor value in the numeric field using the arrows 13 10 2 3 2 HDSDI Color Space Settings e HDSDI Input Color Space Click on the arrow on the drop down menu and select the desired color space standards from the list o YCbCr709 o RGB709 o YCxCz o XYZ e HDSDI Input Degamma Click on the arrow on the drop down menu and select the desired degamma factor from the list o Rec 09 o DC IMS OM 002949 DRM Page 163 of 196 Version 1 2 Doremi Labs o Custom Choose the desired degamma factor value in the numeric field using the arrows e HDSDI Input Mode Click on the arrow on the drop down menu and select the desired Input Mode from the list o 2D 4 4 4 Dual Link o 3D 4 2 2 13 10 2 4 Info Tab The fourth tab will display the following useful identification information for the controlled device Figure 178 Firmware version Main Board revision Running Mode Serial Number Software Version e Screen ims 1000 net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection O O O O OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Go CineLister r Browse Projectors Ingest Manager Pa ro Content Manager General System C
125. ss auditorium specifics and contact information The user may add one facility per IMS1000 This information is necessary as it contains information needed for the generation of the FLM file The information is used by studios in KDM management 12 11 1 Facility Tab The Theater Properties tab defaults to the Facilities tab Figure 124 Here the user can input the facility name address and auditorium specifics such as screen aspect ratio and screen color E Scree IMS1000 IM S1 000 Software Version 2 4 3 0 Serial Number 199000 User Leve Projection Contacts OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Ta b Finance Entity Name Elie Street Address 11 Screen Aspect Ratio SP Device Manager ZA Macro Editor S1 Content Feed Manager P Terminal Name test City burbank Screen Mask AMC Province CA Screen Color OMS ECU i E Postal code Audio Format Save Button til Country SA Screen Number Name Figure 124 Facilities Tab e Click the Save button to save your changes Figure 124 IMS OM 002949 DRM Page 119 of 196 Version 1 2 Doremi Labs 12 11 2 Contacts Tab To access the Contacts Tab use the arrow at the right side of the GUI Figure 124 Here the user can input the information of the appropriate contact for the facility Figure 125 al Screen IMS1000 d 0 re mM I Vi S1 000 Software Versio 2 4 3 0 Serial Number 199000 Iser Leve Projection OVERVIEW ADMINISTRATION CONTR
126. ssis Networking Tab Storage Product name IP Address eth0 10 11 26 47 gt Serial number IP Address eth 192 168 100 650 Hardware Base board MediaBlock Ti me and Log Download Clock Versions P System clock Tue Mar 26 2013 11 19 01 Firmware version Date Secured clock 1315 1800s Software version Ad dress nfo rm at O n Timezone America Los_Angeles SM Version C O n f rm ed UTC Offset 420 minutes Watermark Next DCT change Sun Nov 3 01 59 59 2013 PDT Web version Figure 52 System Monitoring Tab Window IMS OM 002949 DRM Page 56 of 196 Version 1 2 Doremi Labs 7 3 Network Reset If for any reason the network settings need to be reset go to Administration Control Panel Networking Configuration and click the Reset button located on the bottom of the screen Figure 53 Administration Tab Screen Makram IMS M S 1 000 Software Versio 2 4340 55 Number 199000 User Level Projection OVERVIEV ADMINISTRATION CONTROL MONITORING Hostname Makram IMS Device Manager Macro Edito ZA acro Editor Properties of eth0 Properties of etht Content Feed Manager T 1 Terminal OREGI Y Obtain an IP address automatically with DHCP Obtain an IP address automatically with DHCP IP address IP address 192 168 100 50 Netmask Netmask 255 255 255 0 Reset Gateway Gateway 192 168 100 1 Button Figure 53 Networking Configuration Window IMS OM 002949 DRM Page 57 of
127. streaming video hence there is no need to refresh during playback IMS OM 002949 DRM Page 144 of 196 Version 1 2 Doremi Labs 13 8 2 Ingest Monitor The IMS1000 allows the user to ingest content while the server is ingesting previously selected content Click on the Ingest Monitor tab to see the progress of all the ingested items Figure 153 e USB ingests are Real Time e esata ingests are two thirds of Real Time IMS1000 SotwareVerion 2430 Serial Number 199000 Jser Leve Projection doremi OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT mm Delete r Refresh Pause Resume Cancel Go CineLister Ingest Scan Upload Content Manager Device Controller firmware IMS FW 4 1 5 0 license IMS firmware rescue IMS FW 4 1 3 3 license IMS IMS 6 0 10 pkg IMS fw_4 1 6 0 pkg IMS fw_4 1 7 0 pkg Audio Test Doremi _Ref_16ch_Encrypted 2013 03 19717 43 19 2013 03 19T117 43 19 2013 03 19T17 43 36 2013 03 19T22 15 22 2013 03 19T22 25 25 2013 03 22T20 05 23 2013 03 1911 7 43 33 2013 03 19T17 43 37 2013 03 19T1 7 43 40 2013 03 19T22 15 22 2013 03 19T22 25 25 2013 03 22T20 05 23 2013 03 19T17 43 37 2013 03 19T17 43 40 2013 03 19717 43 42 2013 03 19T22 15 24 2013 03 19T22 25 27 2013 03 22T20 05 29 Macro Execution SHEM_DCI_with_1KHz on all 8 channels 2013 03 22T20 05 53 2013 03 22720 05 53 ingest 10 11 18 51 assets 1ec2a8ta 5de1 4153 b947 769e1e3d71a5 PKiomi Copying asset 2 PK
128. t L audio channel Ch 02 is Right R Output ch 02 will be playing the CPL s Right R audio channel Ch 03 is Center C Output ch 03 will be playing the CPL s Center C audio channel Ch 04 is LFE Screen Sub Woofer Output ch 04 will be playing the CPL s LFE Screen Sub Woofer audio channel Ch 05 is Left Surround Ls Output ch 05 will be playing the CPL s Left Surround Ls audio channel Ch 06 is Right Surround Rs Output ch 06 will be playing the CPL s Right Surround Rs audio channel Ch 07 is Left Center Lc Output ch 07 will be playing the CPL s Left Center Lc audio channel Ch 08 is Right Center Rc Output ch 08 will be playing the CPL s Right Center Rc audio channel Ch 09 Ch 14 These channels are pass through meaning the output channel X will be playing the CPL s audio channel X X will be a value between 9 and 14 Ch 15 is HI Output ch 15 will be playing the CPL s Hearing Impaired HI audio channel Ch 16 is VI Output ch 16 will be playing the CPL s Narration VI audio channel IMS OM 002949 DRM Page 79 of 196 Version 1 2 Doremi Labs a Screen IMS1000 domain net M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection P o D E 10 cl OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Device Manager i Template Mapping 8 channels Macro Editor Channel Label Channel Label Content Feed Manager LI ent ch 09 Mute Ter
129. t tab using the Filter button located on the top portion of the window Figure 166 The Filter button allows the user to sort the CPLs based on the following elements e All Elements Incomplete Elements and Feature Note The black highlighted area Figure 166 indicates whether the content is 3D or has subtitles ST 1 IMS1000 0 re M Serial Number 199000 Compo a OVERVIEW Subtitle Go CineLister ing st Manager e Filters 2 Delete Overview en sT StEM_DCI Chinese subtitles Decryption Keys Show Playlist Licenses Device Controller e Macro Execution UID Duration Sound Channel count Quantization 13 9 3 Decryption Keys Page ADMINISTRATION CONTROL MONITORING Refresh e Search Kind UU feature Q um uuid c6fe000d 49fd 4230 aft0 150243021bdf feature um uuid 98781194 c4bc 3042 90608 e81bd1ee3557 Package size Picture Encoding EditRate Figure 166 Filter Tool ims 1000 net Software Version 2 4 3 0 Projection e The Decryption Keys page displays the list of all encrypted CPLs on the unit and the corresponding KDMs with a description of the following information Figure 167 o Expiration date Description with electronic serial number of the unit O o UUID of the KDM o Associated CPLs IMS OM 002949 DRM Page 153 of 196 Doremi Labs Version 1 2 IMS1000 Serial Number 199000 doremi D CineLister ingest Manager OVERVIEW ADMINISTRATION Upload 2 Delete D
130. ter RJRight chi0 Rc Right center CiCenter ch11 Ris Left rear surround LFE Screen chi2 Rrs Right rear surround Ls Left surround ch 13 D BOX Primary Rs Right surround ch14 D BOX Secondary Hi Hearing impaired chi5 Mute ch 08 VI N Narration ch t6 Mute Figure 77 Audio Mapping Set to ISDCF 12 2 2 7 Passthrough Configuration This configuration allows the CPL s audio channel to passthrough to the processor Figure 78 doremi SP Device Manager ZA Macro Editor E Content Feed Manager T 1 Terminal 0 System coi IMS OM 002949 DRM Screel IMS1000 domain net M S1 000 Software Version 2 4 3 0 Serial Number 199000 User Leve Projection OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Template Mapping Passthrough Channel Label Channel Label Input ch 09 Input09 Input02 ch10 Input10 Input03 ch 11 Input Input04 ch12 Input12 Input05 chi3 Inputi3 Input06 chi4 Inputi4 Input chi6 Inputi5 ch 0s iInputd8 chi6 Input16 Figure 78 Audio Mapping Set to Passthrough Page 82 of 196 Version 1 2 Doremi Labs 12 2 2 8 Custom Mapping Configuration Click on the drop down menu and select Custom e The following window will appear Figure 79 Screen IMS1000 domain net N S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Y Device Manager Template Mapping Custom ef Macro Editor Channel Label Channel L
131. the unit Valid KDMs are KDMs that have not expired yet and are for trusted devices Invalid KDMs are KDMs that are either expired or for the wrong trusted device Expired KDMs are KDMs with a validity date that has expired Not yet valid KDMs reference KDMs made in advance not valid in present to be used in the future A valid License is a license that has not expired An expired License is a license with validity date that has expired e Not yet valid are licenses available on the unit not valid in present but valid only for future use e The main sub tab Overview will display how much space is available on the unit e The sub tabs will show the user all details for the Composition Playlists Decryption Keys Show Playlists Licenses and other related fields that are on the unit IMS OM 002949 DRM Page 146 of 196 Version 1 2 Doremi Labs 13 9 2 Composition Playlists Page OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT E Screen ims 1000 net De ete M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection Button O mm 2 Delete Refresh search Q CineLister Ingest Manager Name Kind d eh sr Serenity Full Moie v3 2 um uuid c6fe000d 49fd 4230 aff0 50243021 bef Overview st SIEM_ DCI Chinese subtitles um uuid 98781194 c4bc 3042 9b08 e81bd1ee3557 Decryption Keys Show Playlist Licenses Device Controller ro Macro Execution UID Duration Package size Sound Picture Channel
132. the CPL s Hearing Impaired HI audio channel Ch 08 is VI Output ch 08 will be playing the CPL s Narration VI audio channel Ch 09 is Left Center Lc Output ch 09 will be playing the CPL s Left Center Lc audio channel Ch 10 is Right Center Rc Output ch 10 will be playing the CPL s Right Center Rc audio channel Ch 11 is Left Rear Surround Lrs Output ch 11 will be playing the CPL s Left Rear Surround Lrs audio channel Ch 12 is Right Rear Surround Rrs Output ch 12 will be playing the CPL s Right Rear Surround Rrs audio channel Ch 13 is Input Ch 13 is pass through meaning the output channel X will be playing the CPL s audio channel X Ch 14 is Input Ch 14 is pass through meaning the output channel X will be playing the CPL s audio channel X IMS OM 002949 DRM Page 81 of 196 Version 1 2 Doremi Labs e Ch 15 is Input Ch 15 is pass through meaning the output channel X will be playing the CPL s audio channel X e Ch 16 is Input Ch 16 is pass through meaning the output channel X will be playing the CPL s audio channel X doremi SP Device Manager to Macro Editor 4 Content Feed Manager T Terminal 10 System zad Screen IMS1000 domain net M 1 000 Software Version 24 340 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Template Mapping I SDCF Channel Label Channel Label Lien ch 09 Lc Left cen
133. the type of watermark present o Audio Watermark Displays the type of watermark present e Security Manager o Blackout Mode Service Door Status service Door Armed Physical Marriage Displays whether or not the physical marriage is operational Logical Marriage Displays whether or not the logical marriage is engaged Active Marriage E Screen ims 1000 net 1 0 re M M ki 000 Software Version 2 4 3 0 Serial Number 199000 User Level Projection O O O O Y OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Projector Media Decoder System Model Video Watermark Storage 7 S Connection Status Audio Watermark Hardware Log Download Figure 188 MediaBlock Tab IMS OM 002949 DRM Page 175 of 196 Version 1 2 Doremi Labs 14 7 Log Download The Log Download tab allows the user to generate System and Security Manager logs for a designated amount of time doremi New Button g Diagnostics Screen IMS1000 WIEL M S 1 00 0 Software Version 2 4340 Serial Number 199000 User Level Projection Download Icon og Download OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT Applied Filters From 2013 04 05 To 2013 04 12 Figure 189 Log Download To generate a log e Click on the New button Figure 189 The New Log window will appear Figure 190 Create New Log Database Security Manager Starting date 04 05 2013 Ending date 04 12 2013 Figure 190 New Log Window e Select e
134. the user is already logged in with SuperManager privileges the password confirmation window will not appear e Click on Yes to confirm the deletion 13 9 6 Adding a License e To add a license have the license file on a USB flash drive and plug it into a USB port on the unit e Goto the Control Ingest Manager and select Local Storage from the drop down menu e Select the license file s to install and click the Ingest button Figure 171 a Screen IMS1000 M S 1 0 0 0 Software Version 2 4 3 0 Serial Number 199000 User Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Ingest lt 2 Refresh Go CineLister Local Storage El al elements A P ngest localhost scanned about 0 minute ago Ingest Monitor 8 ConfigureHDMiinDisable clarity Upload ConfigureHDMilnDisable IMB Content Manager ConfigureHDMlinDisable IMS Device Controller ConfigureHDMlinEnabie clarity ZA Macro Execution ConfigureHDMilinEnable IMB ConfigureHDMillnEnabie IMS Support K IMB SPL s 0 DLM s 17 Figure 171 License Ingest e The user will be asked for a password Enter the appropriate password and press Ok e Itis not necessary to reboot the unit e Go back to the License Manager GUI The ingested license s will be visible e After ingesting a license the associated device e g Subtitle Engine Dolby DFC 100 will be visible in the Device Manager GUI IMS OM 002949 DRM Page 157 of 196 Version 1
135. tion Trigger Cues Test Feature AS Pattern Black Black 3D Black 3D 48 Trailer CAMPAIGN_TLR 1A SMPTE 30_S EN XX US GB Trigger Cues Test Start Time Elements Figure 111 Trigger Cue Selected e The Edit Trigger Cue window will appear Figure 112 IMS OM 002949 DRM Page 109 of 196 Version 1 2 Doremi Labs Edit Trigger Cue Select an automation cue to execute on trigger Automation cues Test Scope The trigger is available for all elements of the ShowPlaylist Figure 112 Edit Trigger Cue Window e Select the Automation Cue to associate to the Trigger by clicking on it in the Automation Cues window e Click Ok when finished and the Trigger will appear on the right hand side of the GUI Figure 113 Screen ims1000 1 ims 1000 domain net M S1 000 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT LU Refresh D New Open Save K Properties IN Delete Playback all elements D e SPL Show Playlist 2D Schedule Automation Cues on Test do Test a Trigger Feature C ue Content Manager StEM_DCI Chinese subtitles Ad d e d Device Controller Pattern Ingest Manager 0 Macro Execution a Black 3D Black 3D 48 Trailer CAMPAIGN_TLR 1A SMPTE 30_S_EN XX_US GB Trigger Cues Test Start Time Elements Figure 113 Trigger Added IMS OM 002949 DRM Page 110 of 196 Versio
136. tion on the Storage tab and drive replacement refer to Section 14 IMS OM 002949 DRM Page 70 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 71 of 196 Version 1 2 Doremi Labs 11 Overview Tab The Overview Tab will always display first upon logging in to the IMS1000 GUI Figure 68 This tab provides the user with a snap shot of the systems current status The top section of the screen labeled Playback will display the current playback status along with any upcoming ShowPlaylist schedules The lower part of this screen displays the current System status and is separated by Storage Server and Projector status Hot links on this tab provide quick access to the user for its respective function From the top Tabs Bar the user can navigate to the Administration Tab Control Tab or the Monitoring Tab a Screen Makram IMS I re M M ki 000 Software Version 2 4 3 0 Serial Number 199000 OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT No schedule Server Playback Mode Security Manager Active Marriage data 1760 GB free of 1853 GB Hardware Figure 68 Overview Tab IMS OM 002949 DRM Page 72 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 73 of 196 Version 1 2 Doremi Labs 12 Administration Tab The IMS1000 GUI Administration tab provides access to various applications as listed below e o access the
137. to be manually entered Click the New button to add a new server The following fields will appear Figure 116 Screen ims1000 1 ims 1000 domain net M S 1 0 00 Software Version 2 4 3 0 Serial Number 199000 User Level SuperUser OVERVIEW ADMINISTRATION CONTROL MONITORING LOGOUT A New 2 Delete VM pa E o a Macro E us Identifier New Server 1 New Server 1 D SEN ingest Protocol FTP E Terminal Server IP 0 0 0 0 A System Usemame manager Password eeeeceee P Control Panel Remote Path Teoousseussoesonessenesvanencnvousseanenensousneapent S Authorize play while ingest from this server File type to scan Key Delivery Message Doremi License S Composition Playlist Show Playlist S installation Package Figure 116 Add New Server Enter the Identifier name in the Identifier field It is recommended that a unique identifier be used e g screen 1 screen 2 etc Enter the IP address for the server Optional Click the Test button to test the IP connection A pop up window will appear that will test the connection Click the Close button to exit this window Enter the Remote Path for the destination of the server The user will have to manually enter the Remote Path 12 7 4 2 Advanced Options Clicking the Advanced Options button will open a drop down menu where the user can configure the following file types to be used for ingesting Authorize play while ingest from this server enabled by def
138. ult IP address for Eth1 e IP 192 168 100 50 e SM 255 255 255 0 e GW 192 168 100 1 Page 165 of 196 IMS OM 002949 DRM Doremi Labs Version 1 2 13 11 Macro Execution This allows the operator to execute a set of macros in one single click Figure 180 This feature is particularly useful in emergency cases For instance in case of a crash recovery the player will resume the show but the operator will have to quickly execute some macros such as projector lamp on D Screen ims 1000 net IMS1000 A zt Serial Number 199000 ser Level Projection OVERVIEW ADMINISTRATION CONTROL MONITORING Refresh Q CineLister Ingest Manager 3 A 9 Execute a saved automation cue macro in one single click Content Manager Device Controller Macro List ei Dowser Open Pause HDMI Mode Internal Figure 180 Macro Execution IMS OM 002949 DRM Page 166 of 196 Version 1 2 Doremi Labs This page has been intentionally left blank IMS OM 002949 DRM Page 167 of 196 Version 1 2 Doremi Labs 14 Monitoring Tab This application provides information for each drive detailed reports and allows the user to replace and rebuild a failed RAID 14 1 Diagnostics To access the Diagnostic application go to Monitoring Tab and click on Diagnostics e The System tab will automatically appear on the screen Figure 181 1 0 re M Serial Number 199000 F Detailed Report Chassis Storage Product name Serial number
139. ve EEN 172 MAR A a dee ELO 173 14 4 1 3 Inserting a New Drive EEN 173 IMS OM 002949 DRM Page 10 of 196 Version 1 2 Doremi Labs 1442 SREDUMO Progres Sae erecta A eee 173 1442390 EN Le are amp DIVE a 174 1443 REDUINGING a BAID cesan 174 ES ONORA EE 174 t46 MOda BOCK T AAA A A AA AA EA 175 t47 OG WIOWINO AG ii 176 19 nn aa aaa 179 1927 PRAID INO DOCIO iii eee 179 15 2 Ere koaded Test Coment start ii 179 16 Appendix A General Purpose Output Connection DiagraM ccoonnccconnnccconnnnnonannnnos 181 17 Appendix B General Purpose Input Connection DiagraM occcoonnccconnncnnncnnononannnnos 183 18 Appendix CL LED BONA ist cis 185 19 Appendix D HDMI Inputs Supported Format coooonccoonnccnonononcnoncnconanonnonanenanannnnos 188 20 Appendix E SDI Supported Format cccccsseseseeceseeeeseeeseeeeseeeeeseeseeeeeeneneeeenes 190 ZO VICO iii 190 Se 6 EE 190 21 Appendix F Connection Diada Misa ii 192 22 ege ah On E 194 23 Document Revision History nasasa 196 IMS OM 002949 DRM Page 11 of 196 Version 1 2 Doremi Labs Software License Agreement The software license agreement can be found at the following location http www doremilabs com support cinema support cinema warranties Hardware Warranty The hardware warranty can be found at the following location http www doremilabs com support cinema support cinema warranties HDMI The terms HDMI and HDMI High Definition Multimedia Interface and t
140. will appear Select JNior The Device Manager GUI will be updated to reflect the addition of the JNior device Input the JNior Server IP address in the appropriate field Figure 89 The port number field will already contain the appropriate value factory default value The JNior device documentation will provide the correct username and password factory default values Click the Save button to record the settings A window will appear asking for a password Enter the password to proceed Page 91 of 196 Doremi Labs Version 1 2 doremi 12 3 4 1 P ZA Macro Editor Content Feed Manager f Terminal OSEA m Control Panel IMS1000 Serial Number 199000 OVERVIEW gt New Delete Closed Caption Projector eCNA NO Subtitle Engine vare Version 24 340 Projection ADMINISTRATION CONTROL MONITORING LOGOUT a Device Type JNior identifie JNior Server IP Port 9200 Username jnior Figure 89 JNior Added Removing a JNior Device To remove the JNior device click on it in the Device Manager GUI Click the Delete button Figure 87 12 3 5 Adding a Raw Device A Raw device allows for communication with an external device across an Ethernet connection using Raw data formatted as text or binary strings IMS OM 002949 DRM To add a Raw device click the New button The New Device drop down menu will appear Select Raw The Device Manager GUI will be updated to reflect the additi

IMS1000 User Manuals

Contents

Download Pdf Manuals

Related Search

Related Contents