Tri Mode Manual
Contents
1. from the suns harsh rays while providing a comfortable open environment for the child The roll up blind system means that the child can be shielded from the sun without being fully enclosed and folds up into its own self enclosed pouch for easy storage BABY cup boitle holder was designed for the busy lifestyle of today s parents and carers With the specially designed holding section big enough to accommodate up to a 1 5 litre bottle or those big coffee cups refreshment is always within easy reach 3001 cover The generous proportions of this fleecy lined boot keep your child warm and protected from the elements while offering a sense of space without constriction ravel Storage Be Available in BLACK only the travel bag is specifically tailored to the RUNABOUT model and provides sections and compartments for all the components including wheels axles etc With tailored slots for the harness system the fleecy lined muff keeps your child comfortable in cool conditions while the top zips off to convert it to a comfy stroller pad 4 Season Foot Muff With all the features of the standard model the 4 season model includes a zip out top section which reveals our unique UV protective net This allows even more cool and regulated airflow in warmer conditions x r Ea e ug i OPTIONAL ACCESSORIES r ai a The VALCO HITCHHIKER is a boon to any parent with a child who is2. Secure the frame closed by carefully cut the cable tie which so that the stroller frame unfolds swinging the fold latches located holds the frame from beneath on both sides of the frame and 2 Lift the handle upward to a vertical 2 Press down on the locking hinge fully engaging them tightly onto position with your hand or foot the frame IMPORTANT WARNING Always test that all latches are securely engaged before use Outside S wheel hub qs Taxie button 1 Pressing the axle button insert the 1 To remove the wheel simply 1 Pressing on the centre hub button protruding long axle into the press the axle button in the centre insert the SQR axle through the opening in the tube at the rear of the of the wheel hub and outside of the metal hub in each stroller chassis simultaneously pull the wheel wheel 2 Repeat this procedure for the other outward IMPORTANT Insert through outside of side the wheel the side which does NOT have the nylon brake cog If your brakes do not engage check to see that the nylon brake cogs are on the INSIDE of each wheel when it is attached to the chassis If not remove the wheel and SQR axle and re insert the SQR axle from the other side of the wheel so that the cog will be on the inside of the wheel Your front bar 1 Remove the plugs from the nylon housing at either side of the stroller frame by pressing each inner release button and pulling the plug upward 2 Insert the bar ends
3. be sure to attach the tether straps around the stroller frame by feeding the strap through the slitin the steel buckle While not essential for safety these help reduce the motion of the seat within the stroller frame 3 Press down on the side locking hinges on the basket to lock the frame in the open position 4 Secure the handle to the frame by engaging the locking clamps on both sides NOTE Special care must be taken when adjusting the seat position with a child in the stroller Before adjusting the zippers place your hand beneath the seat at its current position and lift it slightly This will relieve pressure on the zippers and make them easier to adjust no zip recline selected units The new no zip recline offers an almost infinite amount of seat adjustments 1 RECLINE While squeezing the centre release mechanism in a pincer action ease the seat down to the desired position 2 INCLINE Place your hand in the centre of the rear of the seat 3 Pull the incline strap while gently pushing on the rear of the seat until the desired position has been reached ALWAYS TEST that the seat is securely locked in place Your seat can be adjusted to 4 positions using the zip system 1 To recline pull one of the zippers located on the seat side downward 2 Do the same to the corresponding zipper on the other side of the seat 3 For more recline release more zippered sections 4 For sea
4. be snugly fitted to the baby s body tight enough so that the baby cannot wriggle itself free of the straps but loose enough so as not to cause the baby any discomfort TO OPEN YOUR HARNESS 1 Press down on the Buckle Prongs 1 2 Simultaneously push the release button in the centre of the buckle 2 3 Pull the buckles from the Buckle Housing Your harness system has been designed to meet very stringent safety standards and incorporates our unique secondary action This helps ensure that your child cannot release the harness unaided OPTIONAL ADDITIONAL ACCESSORIES UV Protective Insect Net Our unique insect net zips directly in to the inside of your RUNABOUT Tri Mode hood In addition to keeping baby cool comfortable and safe from insects it also blocks up to a rays massive of the sun s harmful tested to Australian Standard 4399 EO i AAA AILA recen mT BE ica Gaal Available in versions for both Single and Twin Runabout models the optional toddlerseat sits firmly inside the chassis Perfect for twins and an older sibling Twin model or when a new baby comes along and junior still likes to go for a ride Both Twin and single models even fold totally out of the way with the stroller See your local specialist retailer for more info and suitability Sunstopper Universal fit The unique SUNSTOPPER Universal fit provides the ultimate protection The revolutionary VALCO Bottle Cup Holder
5. Product Reference Guide Read and follow the instructions contained within carefully before use Retain this guide in a safe and easily accessible place for future reference Prf ere ae eta os jane ees rT Tin isp grar aim a amn ua Po am aa a at an E ial ame Drawings pictures and specifications contained in this manual are for illustration purposes only actual product may vary VALCO BABY reserves the right to alter any specification s colour or features without prior notice or incurring any obligation to similarly alter products previously purchased Thank you for purchasing a quality VALCO product Due to our policy of continuous product development this product is constantly evolving It is possible that some features or procedures outlined here have changed since this document was written If you are unsure of any procedure outlined here please contact the store from which you purchased it to obtain the most up to date information or contact us via the internet See relevant web contact addresses on the back page Stroller Assembly Opening Remove the stroller from the carton and dispose of all packaging immediately including the black rubber protectors on either side of the brake bar and front wheel protector The front wheel forks rear wheels front bar and hood all need to be installed prior to use 1 Lay the stroller flat on the floor and 1 Lift the front wheel housing upward 1
6. adjusting the stroller ALWAYS beware of little fingers when folding or unfolding your stroller to prevent finger entrapments ALWAYS engage the brake system when the stroller is at rest NEVER leave any child unattended in the stroller NEVER use on escalators or stairs When in the stroller the child must ALWAYS wear the safety harness correctly fitted and adjusted at all times DO NOT hang shopping bags from the handle as this may affect the stroller s stability Always use the basket provided the maximum weight in the basket Is 6 kg s 13 Ibs Do not carry additional children It may be unsafe to use any accessories other than VALCO approved ones ALWAYS be aware of the risks provided by fire and other significant sources of heat such as radiators etc which may be in the immediate vicinity of your stroller This product is intended for domestic use only It is not intended for commercial use Continued and extended exposure to sunlight and the elements can change the colours of many materials To avoid fading always cover and store in a shaded area Caring for your stroller Moving parts may be lubricated with silicone based lubricants do not use oil Regularly check wheels for loose spokes tighten as necessary Your Runabout chassis is made of aluminium alloy but does include some metal parts Special care must always be taken to avoid rust If this pram is used near the ocean or salty air environments spray the chas
7. e easily hung from the stroller handle Using your harness Your Runabout stroller is fitted with our unique new multi point safety harness system Your child MUST always be harnessed while in the stroller TO SECURE YOUR CHILD IN THE HARNESS 1 Overlap buckles A and B so that they fit together to form one complete buckle 2 Insert the completed buckle into the Buckle Housing C until it engages securely in place 3 Carefully adjust the harness straps to snugly fit your child by adjusting the Sliders located on all Shoulder Straps Waist Straps and the Crotch Strap 4 Your harness can be adjusted for even more comfort for smaller or larger children at the top of the seat back and front of the seat by threading removing the shoulder straps through the webbing sewn into the seat NOTE Your stroller must ONLY be used with the Crotch strap threaded beneath the front webbing strap You will need to detach the waist straps at the sides of the stroller in order to do so To detach the waist straps With a pincer movement depress the centre buckle button and pull the strap free from the housing 5 To prevent older children tampering with the strap adjustments and for greater child comfort your RUNABOUT stroller is provided with 2 soft strap covers for each harness To fit detach the waist straps at the sides of the stroller as in point 4 and thread the strap through the strap cover Re attach each strap The harness should
8. into the nylon housing located on either side of the frame Be sure that the bar is securely engaged 3 Adjust the front bar by simultaneously pressing the 2 red buttons and swivelling the bar forward or backward NEVER use your stroller with the front bar in the lowest position This position is ONLY for use when folding the stroller 4 To remove the front bar Feeling the side of the nylon housing that sits below the frame at each side facing inward locate the release button 5 Press the release button inward while simultaneously pushing upward on the bar housing Repeat for the other side IMPORTANT WARNING The front bar IS NOT a restraining device ALWAYS re insert the plugs into the housing when there is nothing inserted Installing Removing and using the front wheel forks Your Runabout stroller utilizes our unique and revolutionary new TRI MODE front swivel system To remove the front fork l Rotate the TRI MODE selection dial to the centre 45 position The unique TRI MODE swivel system is as flexible as it is functional over a variety of terrains and uses 1 To install the front fork rotate the TRI 2 Tilt the stroller frame upward on 1 LOCK This position is best for use on MODE selection dial to the centre the rear wheels extremely rough or soft terrain such as 45 position 3 Press the centre release button sand etc which inhibit wheel swivel To lock 2 Tilt the stroller frame upwa
9. old enough to walk but young enough to need to rest along the way Made of high quality and extremely sturdy materials maximum weight 30 kg s 66 lb s the HITCHHIKER is easily adjustable for height width and distance from the stroller which makes it fit most brands makes and models of strollers The handy hang up system means it can hang out of the way when not in use while the unique quick release systems allows for quick and easy removal All this and more makes the HITCHHIKER the perfect option for that in between age child See your local specialist retailer for more information Your child s safety is your responsibility Be sure to check that all clamps and buckles are securely fixed and in place before use Check all parts for breakage or fatigue before use Discontinue immediately if any part is found to be damaged or broken The maximum weight of the child for which this stroller is intended is 22 kg s 48 Ibs The maximum height of the child for which this stroller ts intended is 106 cm 42 in This product will become unstable if the recommended load is exceeded Can be used from birth A cocoon specially designed to be used with a stroller is recommended when any fully reclining stroller is used with a newborn NEVER jog with a newborn baby in any pram or stroller until the child can sit up unassisted approximately 6 months ALWAYS ensure that the child is clear of all moving parts when
10. rd on the rear wheels 3 Insert the fork shaft into the TRI MODE housing till it clicks into place The fork will then be released your wheel rotate the dial to the LOCK position Swivel the wheel around till it locks into position 2 O The central position locks the wheel into l a tight 45 swivel arc This provides more IMPORTANT Aways ea that the fork is stability for use with a toddlerseat or when securely engaged in the housing going down inclines 3 SWIVEL This position allows full Folding Opening your stroller unfettered swivel action 1 Fold the hood back up against the handle 2 Release the locking clamps at either side of the stroller 3 Simultaneously lift the secondary safety catch and swing the handle forward 4 Holding the frame at the rear 6 press down with your foot on the rear basket tube This will You can lock the frame closed by 1 stretching the locking strap over the frame placing the metal catch over To open unhook the frame locking strap reversing the previous step disengage the side hinge locks 5 Continue pushing the rear of the basket moving the rear wheels forward beneath the frame the rivet on the chassis 2 Holding on to the side of the footrest with your foot stopping the rear wheels lift the handle so that the frame begins to unfold Adjusting your seat zip belt System selected units NOTE Before using your stroller
11. sis and seat frame with water and dry thoroughly This is particularly important for parts such as wheel spokes and springs We recommend rust inhibiting product should be applied to prevent accelerated rust and fatigue of these metal parts We recommend that you wipe down axles and lubricate the wheels every 3 months particularly the front wheel and housing Sand and dirt can grind down axles so if you live walk or run near on the beach or in a dusty environment you must remove and wipe down the axles and wheels then lubricate them MONTHLY AXLES AND MOVING PARTS ARE BEST LUBRICATED WITH SILICONE BASED PRODUCTS DO NOT USE OIL BASED PRODUCTS In Australia NZ In North America www valco com au www valcobaby com www valco co nz 1 800 610 7850 Copyright VE 2006
12. t incline simply reverse this procedure BE SURE THAT ALL ZIPPERS ARE OPENED CLOSED FULLY BEFORE USE Installing your hood Using your brakes h Place the plastic hood housings over the corresponding housing on either side of the stroller frame 2 Align the straight track on the stroller housing with the corresponding hole in the hood housing Slide the hood housing downward over the track so that it completely engages onto the stroller frame wo IMPORTANT Always check that the brake has fully engaged In addition to the 4 adjustment positions using the zip system your stroller has an additional 5 position which raises the seat to an even more upright sitting position With all zippers fully closed lift the seat back further upward with your hand 2 Secure the seat with the two sets of straps one at the top and one at the bottom of the seat back inserting each buckle into the corresponding buckle housing in the matching strap There are two available brake systems available for the Runabout Tri Mode series STANDARD BRAKE pictured 1 Press down on the centre of the brake bar until the bar ends engage in the nylon brake cogs on the wheel 2 To disengage lift the brake bar upward till it locks in the upright position CONCEALED BRAKE 1 Press the centre toggle down firmly with your foot until you feel the wheels have locked 2 To release lift the centre toggle from benea
13. th with your foot IMPORTANT WARNING Always test that all axles wheels front bar hinges and locks are securely engaged before use EXTRAS Optional Extra on most models Your Runabout is equipped with a tire Your Runabout is equipped with a Your Runabout hood is fitted with a zip pump that hangs in a special pocket found removable Head Hugger and system to which attaches our unique sewn beneath the seat at the rear shoulder harness covers The Head silver insect mesh optional extra on Hugger is designed to optimize the most models Your tires should be kept at a pressure of comfort of newborn babies within the 40 p s i Under inflated tyres can cause Stroller The shoulder straps increase This protective mesh has been tested excessive and uneven tire wear greater your child s comfort levels when in the and proven to block out up to 80 of susceptibility to punctures and greater harness as well as keeping harness UV rays difficulty in smooth operation adjusters away from busy fingers tested to Australian Standard 4399 AIRGO SYSTEM Your Runabout has been designed to maximise air flow within the stroller by way of our exclusive Airgo system This unique system combines a special breathable seat fabric with our new flexible hood The hood incorporates a built in storage bag designed to zip off when more air flow is required to reveal an additional mesh air vent The bag is designed to go or can b
Download Pdf Manuals
Related Search