Home

RC-C User Manual

1. How to Select Required Events 1 In the Available events list select the required event It is only possible to select one event at a time Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields 2 Click the gt gt button to copy the selected event to the Selected Events list 3 Repeat for each required event If you later want to remove an event from the Selected Events list simply select the event in question and click the lt lt button Output When you configure video and recording for specific cameras you are also able to associate a camera with particular hardware output for example the sounding of a siren or the switching on of lights Associated output can then be activated automatically when motion is detected in video from the camera or manually when Ocularis Client users with the necessary rights view live video from the camera 1 2 In the Available output list select the required output It is only possible to select one output at a time Tip If you have not yet defined any suitable output you can quickly do it Use the Configure Output button located below the other fields Tip Even though output is configured separately for each camera you can select between all output on your system regardless whether output originates on another hardware device than the camera itself Click the gt gt button to copy
2. Configure General Event Handling Before configuring events of any type configure general event handling such as which ports the NVR should use for event data Normally you can just use the default values but it is a good idea to verify that your organization is not already using the ports for other purposes 1 In the Management Application s navigation pane expand Advanced Configuration right click Events and Output and select Properties On Net Surveillance Systems Inc 180 RC C User Manual Configuration 2 Specify required properties When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure General Scheduling and Archiving The general Scheduling and Archiving feature lets you configure when e Cameras should be online that is transfer video to the NVR e Cameras should use speedup that is use a higher than normal frame rate e You want to receive any e mail and or SMS notifications regarding cameras e PTZ cameras should patrol and according to which patrolling profile e Archiving should take place Do the following 1 In the Management Application s navigation pane expand Advanced Configuration right click Scheduling and Archiving and select Properties 2 Specify properties as required for Scheduling All Cameras Scheduling Options and Archiving When ready click OK 3 Save your configuration changes by
3. On Net Surveillance Systems Inc 65 RC C User Manual Licenses Licenses Import DLKs Device License Keys You must have a Device License Key DLK for every hardware device cameras etc on your surveillance system Remember that you are allowed to install and use only the number of cameras covered by your license agreement regardless of your number of available DLKs For example a fully used four port video encoder counts as four cameras it will thus use four licenses even though its four cameras are connected through a single hardware device You get DLKs as part of the software registration process Upon registration all your DLKs are sent to you as a single dlk file attached to an e mail Importing the file is quick and easy and it will free you from having to specify license keys manually for each hardware device later 1 When you receive the e mail save the attached dlk file at a location accessible from the RC C server for example on a network drive or on a USB stick 2 Inthe Management Application s File menu select Import DLKs or click the Import DLKs button if you are working with the Add Hardware Devices wizard 3 Browse to the location at which you have saved the received dlk file select the file and click Open All DLKs are now imported into the NVR and will be available when you add cameras and other hardware Specify a New SLC Software License Code SLCs are required for both the
4. cam era is not valid as there are characters outside the quotes Replace Hardware Device Wizard The Replace Hardware Device wizard helps you replace a hardware device which you have previously added to and configured on your surveillance system with a new one The wizard is divided into two pages e New Hardware Device Information Database Action Remember that you must have a Device License Key DLK for every hardware device cameras etc you intend to use on the system Before using the wizard make sure you have a DLK for the new hardware device Properties Name amp Video Channels e Hardware name Name of the hardware device as it will appear in the Management Application If required you can overwrite the existing hardware device name with a new one Hardware device names must be unique and must not contain any of the following special characters lt gt amp e Video channel enabled Lets you enable disable each of the selected hardware device s video channels Many hardware devices only have a single video channel in which case only one channel will be listed Other hardware devices typically video encoder devices have several video channels Why are some of the channels unavailable This will be the case if you are not licensed to use all of a video encoder device s channels Example You have a video encoder device with four channels but your license for On Net Surveillance Systems Inc 63
5. o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 10 disk space left On the archiving drive RC C automatically checks that the space required for data from a camera to be archived plus 1 GB of free disk space per camera is available If not the archive drive s oldest data from the camera in question will be deleted until there is sufficient free space for the new data to be archived On Net Surveillance Systems Inc 175 RC C User Manual Configuration IMPORTANT You will lose the archive data being deleted Same Drive Automatic Moving or Deletion of Archives if Running Out of Disk Space In the case where the RC C server is running out of disk space and the archiving drive is identical to the camera database drive RC C will automatically do the following in an attempt to free up disk space 1 First RC C will attempt to move archives moving archives is only possible if you use dynamic archiving with which you can archive to several different drives This will happen if o
6. 2 Enable the use of NetMatrix by selecting the Enable NetMatrix check box 3 Specify required properties When ready click OK or select NetMatrix Event Control to configure automatically triggered video sharing 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar e Configure NetMatrix for Automatic Video Sharing 1 In the Management Application s Navigation pane expand Advanced Configuration right click NetMatrix and select Properties 2 Enable the use of NetMatrix by selecting the Enable NetMatrix check box Specify required NetMatrix Recipients properties 3 Select NetMatrix Event Control and configure NetMatrix Event Control properties When ready click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Server Access You can configure clients access the NVR server in two ways e Wizard driven Guided configuration which lets you quickly specify how clients access the server as well as which users should be able to use clients See Configure User Access Wizard When using the wizard all users you add will have access to all cameras including any new cameras added at a later stage If this is not acceptable specify access settings users and user rights separately see the following e Through advanced configuration Technically this is the Image Server service
7. RC C User Manual Wizard the device only allows you to use two of them In that case you will only be able to have two channels enabled at a time the two other channels will be disabled Note that you are free to select which two channels you want to enable Contact OnSSI if you need to change your number of licenses Network Device Type amp License When configuring hardware devices specify the following properties e Address P address or host name of the hardware device e HTTP port Port to use for HTTP communication with the hardware device Default is port 80 To use the default port select Use default HTTP port e FTP port Port to use for FTP communication with the hardware device Default is port 21 To use the default port select Use default FTP port e User name User name for the hardware device s administrator account Many organizations use the hardware device manufacturer s default user names for their hardware devices If that is the case in your organization select lt default gt do not type a manufacturer s default user name as this can be a source of error trust that the software will know the manufacturer s default user name Other typical user names such as admin or root are also selectable from the list If requiring a user name which is not on the list simply type the required user name Tip User names you type yourself will subsequently be added to the list so you can easily select them later e Pa
8. Tip Even though output is configured separately for each camera you can select between all output on your system regardless whether output originates on another hardware device than the camera itself 2 Click the gt gt button to copy the selected output to e the On manual activation list in which case the output will be available for manual activation in the Ocularis Client and or e the On motion detected list in which case the output will be activated when motion is detected in video from the camera If required the same output can appear on both lists 3 Repeat for each required output If you later want to remove an output from the one of the lists simply select the output in question and click the lt lt button Ports amp Polling The General Event Properties window lets you specify network settings to be used in connection with event handling e Alert and generic event port Lets you specify port number to use for handling events including generic events Default port is port 1234 e SMTP event port Lets you specify port number to use for sending event information from hardware devices to the NVR via SMTP Default port is port 25 e FTP event port Lets you specify port number to use for sending event information from hardware devices to the NVR via FTP Default port is port 21 e Polling interval 1 10 second For a small number of hardware devices primarily dedicated input output devices it is nec
9. e After a certain number of seconds has passed since first detection of motion regardless whether further motion is detected or e After a certain number of seconds has passed without further detection of motion 3 Specify the required number of seconds for the selected option default is ten and five seconds respectively Unless transition time see the previous information under Wait and Transition Timing is set to zero motion detection is automatically disabled while the camera moves between preset positions as irrelevant motion is otherwise likely to be detected while the camera moves between the preset positions e Resume PTZ patrolling after PTZ patrolling is automatically paused when the camera is operated manually as well as if PTZ on Event is used You can specify how many seconds should pass before the regular patrolling is resumed after a manual or event based interruption Default is 30 seconds Users of the Ocularis Client are in addition to manual control able to stop a selected PTZ camera s patrolling entirely For Ocularis Client users the number of seconds specified in the Patrolling settings section therefore only applies when users manually control a PTZ camera not when users stop a PTZ camera s patrolling entirely When Ocularis Client users stop a PTZ camera s patrolling entirely the camera s patrolling will resume only when the Ocularis Client user selects to resume it PTZ Patrolling When you con
10. e Asan alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message 5 Repeat steps 3 4 if you want to use several patrolling profiles within the same schedule profile If use of one patrolling profile is followed immediately by use of another run your mouse pointer over the red bar to see which patrolling profile applies when 06 00 08 00 10 00 1200 1400 1600 1800 lit re My patrol scheme _ 1 11 On Net Surveillance Systems Inc 83 RC C User Manual Services Services Overview of Services The following services are all automatically installed on the RC C server RC C Recording Server service A vital part of the surveillance system video streams are only transferred to RC C while the Recording Server service is running RC C Image Server service Provides access to the surveillance system for users logging in with the Ocularis Client RC C Image Import service Used for fetching pre and post alarm images and storing the fetched images in camera databases Pre and post alarm images is a featur
11. 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar For information about how to configure automatic activation of hardware output when events occur see Configure Hardware Output on Event You configure output for manual activation in clients as well as for automatic activation on detected motion individually for each camera On Net Surveillance Systems Inc 167 RC C User Manual Configuration Add a Manual Event With manual events your users with required rights can trigger events manually from their clients Manual events can be global shared by all cameras or tied to a particular camera only available when the camera is selected You can use manual events for a wide variety of purposes for example e As start and stop events for use when scheduling cameras online periods For example you can make a camera start or stop transferring video to the surveillance system based on a manual event e As start and stop events for controlling other camera settings For example you can make a camera use a higher frame rate based on a manual event or you can use a manual event for triggering PTZ on event e For triggering output Particular output can be associated with manual events e For triggering event based e mail and or SMS notifications e In combinations For example a manual event could make a camera start transferring video to the surveillance system w
12. OnlineVerification If this parameter is used all online hardware devices found using HardwareOldMacAdoress are updated All other hardware devices are not updated Any character means yes use online verification Existing configuration parameters that are not specified in CSV file will remain unchanged If a parameter value for an individual camera in the CSV file is empty the existing parameter value will remain unchanged on that camera Most system integrators store hardware device information in spreadsheets like Microsoft Excel from which they can save the information as comma separated values in a CSV file These examples show hardware information in Excel 1 and when exported to a CSV file 2 note the header lines A B C 1 HardwareOldMacAddress HardwareNewMacAddress HardwareAddress Cary 2 00 11 D8 11 87 A9 AD 19 D8 11 B7 11 192 168 1 101 Cas 3 _ DE A9 11 07 4B 11 A9 AD DD 11 87 AA 192 168 1 93 Cas 4 141 AQ 00 FE NN RI AN 1 44 ROA CO RIT aD IRA Ela 9 Har dwar eo ldMacAddress HardwarenewMacaddr ess Hardwareaddre 00 11 08 11 87 49 40 19 08 11 67 11 192 168 1 101 cashier o i 7A9 11 07 46 11 A9 AD0 0D 11 87 44 192 168 1 93 Cashier 11 AG OQ FF N0 R7 Ans AA POQ CC A7 107 162 1 25 Cmar Whichever method is used the following applies e The first line of the CSV file must contain the headers and subsequent lines must contain information about one hardware device each e Separators can be c
13. The best way of protecting your surveillance system server from being shut down abruptly is to equip your surveillance system server with a UPS Uninterruptible Power Supply On Net Surveillance Systems Inc 93 RC C User Manual Stability Improvement The UPS works as a battery driven secondary power source providing the necessary power for saving open files and safely powering down your system in the event of power irregularities UPSs vary in sophistication but many UPSs include software for automatically saving open files for alerting system administrators etc Selecting the right type of UPS for your organization s environment is an individual process When assessing your needs however do keep in mind the amount of runtime you will require the UPS to be able to provide if the power fails saving open files and shutting down an operating system properly may take several minutes e Windows Task Manager Be Careful when Ending Processes When working in Windows Task Manager be careful not to end any processes which affect the surveillance system If you end an application or system service by clicking End Process in the Windows Task Manager the process in question will not be given the chance to save its state or data before it is terminated This may in turn lead to corrupt camera databases Windows Task Manager will typically display a warning if you attempt to end a process Unless you are absolutely sure that ending the process wil
14. When using some I O hardware devices it is necessary for the surveillance system to regularly check the state of the hardware devices input ports in order to detect whether input has been received Such state checking at regular intervals is called polling The interval between state checks called a polling frequency is specified as part of RC C s general ports amp polling properties For such I O hardware devices the polling frequency should be set to the lowest possible value one tenth of a second between state checks For information about which I O hardware devices require polling see the release notes On Net Surveillance Systems Inc 197 RC C User Manual Configuration View Video from Cameras in Management Application You can view live video from single cameras directly in the Management Application 1 In the Management Application s navigation pane expand Advanced Configuration and expand Cameras and Storage Information 2 Select the required camera to view live video from that camera Above the live video you will find a summary of the most important properties for the selected camera Below the live video you will find information about the camera s resolution and average image file size For cameras using MPEG or H 264 you will also see the bit rate in Mbit second IMPORTANT Viewing of live video in the Management Application may under certain circumstances affect any simultaneous recording from the camera in ques
15. allowing you to add slave servers to the master server When selecting a slave the Add button is disabled and the Delete button is enabled allowing you to remove a slave server Microphone Properties When you configure microphones properties are limited to e Enabled Microphones are by default enabled meaning that they are able to transfer audio to RC C If required you can disable an individual microphone in which case no audio will be transferred from the microphone to the NVR e Microphone name Name of the microphone as it will appear in the Management Application as well as in clients If required you can overwrite the existing microphone name with a new one Microphone names must be unique and must not contain any of the following special characters lt gt amp In RC C it is only possible to have one microphone enabled at a time On some hardware devices audio can also be enabled disabled on the hardware device itself typically through the hardware device s own configuration web page If audio on a hardware device does not work after enabling it in the Management Application you should thus verify whether the problem may be due to audio being disabled on the hardware device itself Motion Detection amp Exclude Regions When you configure video and recording for specific cameras adjusting motion detection is important since it may determine when video from the camera is recorded when e mail notifications
16. Output Events Input amp Output Overview of Events Input amp Output Hardware input such as door sensors etc can be attached to input ports on hardware devices Input from such external hardware input units can be used for generating events in the NVR Events of various types see the following for details can be used for automatically triggering actions Examples of actions starting or stopping recording on cameras switching to a particular video frame rate triggering e mail or SMS notifications making PTZ cameras move to specific preset positions etc Events can also be used for activating hardware output Hardware output units can be attached to output ports on many hardware devices allowing you to activate lights sirens etc from the NVR Such hardware output can be activated automatically by events or manually from clients e Event Types e Hardware input events Events based on input from hardware input units attached to hardware devices are called hardware input events Some hardware devices have their own capabilities for detecting motion for detecting moving and or static objects etc configured in the hardware devices own software typically by accessing a browser based configuration interface on the hardware device s IP address When this is the case RC C considers such detections as input from the hardware and you can use such detections as input events as well Lastly hardware input events can b
17. Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column e Frame Rate Time Base Select required unit for live and recording frame rates per second minute or hour e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Speedup Frame Rate Properties e Enable Speedup The speedup feature lets you use a higher than normal frame rate if motion is detected and or an event occurs When you enable speedup further columns for specifying speedup details become available e Live Frame Rate Required average speedup frame rate for viewing live video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column The frame rate must be higher than the live frame rate specified under normal mode e Recording frame rate Required average speedup frame rate for viewing recorded video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column The frame rate must be higher than the recording frame rate specified under normal mode e Frame Rate Time Base Select required unit for live and recording speedup frame rates per second minute or hour Note that you can only select time bases that let you speed up frame rates Exampl
18. Windows 7 Professional Ultimate Enterprise 32 bit or 64 bit Intel Core2 Duo minimum 2 4 GHz or higher more powerful CPU recommended when running high number of cameras and multiple views and displays Minimum 2 GB higher RAM recommended when running high number of cameras and multiple views and displays PCI Express minimum 256 MB RAM Direct 3D supported Microsoft NET 3 0 Framework Service DirectX 9 0 or newer NetMatrix Monitor is a dedicated application for viewing NetMatrix triggered video from the RC C surveillance system Apart from a few features that are unique to the NetMatrix Monitor the Ocularis Client offers near identical possibilities for viewing NetMatrix triggered video Operating System CPU RAM Network Graphics Adapter Hard Disk Space Microsoft Windows XP Professional 32 bit or 64 bit and Windows Server 2003 32 bit or 64 bit Windows Vista Business 32 bit or 64 bit Windows Vista Enterprise 32 bit or 64 bit and Windows Vista Ultimate 32 bit or 64 bit Intel Pentium 4 2 4 GHz or higher Minimum 512 MB 1 GB recommended on Microsoft Windows Vista Ethernet 100 Mbit or higher recommended AAGP or PCI Express minimum 1024 x 768 16 bit colors Minimum 50 MB free On Net Surveillance Systems Inc 2 RC C User Manual System amp Requirements Software DirectX 9 0 or newer Running as a 32 bit service application Administrator Rights When you install it is
19. Windows Users By grouping users you can specify rights for all users within a group in one step If you have many users performing similar tasks this can save you significant amounts of work User groups are logical groups created and used for practical purposes in the Management Application only They are not in any way connected with user groups from central directory services such as for example Active Directory If you want to use groups make sure you add groups before you add users You cannot add existing users to groups Finally the 8 administrator is also listed under Users If required this lets you configure password protection for the Management Application Note if using RC C with Ocularis only one user is required This user may be a basic or Windows user and should have full administrative rights to all functions and cameras within the NVR Remaining users will be configured in Ocularis Base Configure User Access Wizard The Configure User Access wizard helps you quickly configure clients access to NVR video When using the wizard all users you add will have access all to cameras including any new cameras added at a later stage If this is not acceptable specify access settings users and user rights separately see Configure Server Access Also note that you cannot add users to groups through the wizard The wizard is divided into a number of pages e Server Access Settings e Basic and Win
20. all your DLKs are sent to you as a single dlk file attached to an On Net Surveillance Systems Inc 5 RC C User Manual Installation e mail When you have installed the new version of RC C you should import the new DLK file as described later e Back Up Your Current Configuration When you install a new version of RC C it will inherit the configuration from your old version However we recommend that you make regular backups of your server configuration as a disaster recovery measure Upgrading your server is no exception While it is rare to lose your configuration cameras schedules views etc it can happen under unfortunate circumstances Luckily it takes only a minute to back up your existing configuration The following describes a backup of NetDVMS versions 6 5x and earlier which is most likely needed when upgrading to RC C version 7 0 If you need information about how to back up your RC C 7 0 configuration see Back Up System Configuration 1 Create a folder called Backup on a network drive or on removable media 2 Onthe recording component server open My Computer and navigate to C Program Files OnSS l Recording_Server For example if upgrading from NetDVMS use C Program Files OnSSI NetDVMS 3 Copy the following files and folders into your Backup folder e All configuration ini files e All scheduling sch files e The file users txt only present in a few installations e Folders with a name ending
21. also fairly quickly fill up the drive with data Camera records to drive C and archives to drive D Obvious benefit is that recordings and archives are on separate drives Archiving takes place less quickly RC C will first temporarily store the archive in the local default archiving directory on C then immediately move the archive to the archiving location on D Therefore sufficient space to accommodate the temporary archive is required on C Camera 1 records to drive C and archives to drive D while Camera 2 records to drive D and archives to drive C Avoid One camera s archiving may take up space required for another camera s recordings In the above example Camera 1 s archiving to D may result in no recording space for camera 2 on D The rule of thumb is Do not cross recording and archiving drives If you use several surveillance servers in a master slave setup each surveillance server must archive to its own mapped location in order for archiving to work If you attempt to archive to the same mapped location for all the servers archiving will fail Archiving Audio If an audio source microphone or speaker is enabled on a hardware device audio recordings will be archived together with video recordings from the camera attached to the hardware device If the hardware device is a video encoder with several channels audio will be archived with the camera on channel 1 When an audio source is enabled audio is recorded
22. and this can make scheduling of PTZ patrolling much easier Despite the fact that several PTZ cameras share a patrolling profile name the movement between preset positions is of course individual for each camera On Net Surveillance Systems Inc 40 RC C User Manual Camera Specific Properties e Preset Positions to Use in a Patrolling Profile Having selected a patrolling profile in the Patrolling profiles list you can specify which of the PTZ camera s preset positions should be used for the selected patrolling scheme 1 Inthe Preset Positions list select the preset positions you want to use A preset position can be used more than once in a patrol scheme for example if the preset position covers an especially important location Tip By pressing the CTRL button on your keyboard while selecting from the Preset Positions list you can select several or all of list s preset positions in one step 2 Click the 5l button to copy the selected preset positions to the Patrolling list 3 The camera will move between preset positions in the sequence they appear in the Patrolling list starting at the preset position listed first If you want to change the sequence of preset positions in the Preset Positions list select a preset position and use the 2 or l buttons to move the selected preset position up or down in the list The selected preset position is moved one step per click If you later want to remove a preset position from the Pat
23. beneficial 1 From the Management Application s menu bar select File gt Import Changes to Configuration 2 Select Online verification if the new hardware devices and cameras listed in your CSV file are connected to the server and you want to verify that they can be reached 3 Then point to the CSV file and click the Import Configuration from File button e CSV File Format and Requirements The CSV file must have a header line determining what each value on the subsequent lines is about and subsequent lines must each contain information about one hardware device only A minimum of information is always required for each hardware device e HardwareOldMacAddress The MAC address of the hardware device used in the template configuration Required format 12 hex characters without spaces or six groups of two hex characters separated with dashes or colons You can furthermore include these optional parameters e HardwareNewMacAdadress The MAC address of the new hardware device to be used in the real configuration Required format 12 hex characters without spaces or six groups of two hex characters separated with dashes or colons e HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 e HardwareUsername User name for hardware device s administrator account In the extremely rare cases where a particular user name has previously been required for a device but you now want the use
24. existing operating system options e lD specifies the boot entry ID in the OS Load Options section of the boot ini file to add the operating system options to The boot entry ID number can be obtained by performing the command BOOTCFG QUERY this displays the contents of the boot ini file at the command prompt A reboot is required after editing the boot ini file for the changes to take effect Removing the 3 GB Switch If you want to undo the 3 GB switch mentioned above follow this procedure Select Start gt Control Panel and double click the System icon Select the Advanced tab and click the Settings button in the Startup and Recovery section Click the Edit button in the System Startup section The boot ini file will launch in an editor Remove the 3GB from the end of the appropriate boot entry line under the operating systems section Save and close the file Click OK in the Startup and Recovery section A reboot is required after editing the boot ini file for the changes to take effect e What to Do If Running Windows 2008 Server or Windows Vista IMPORTANT Improper modification of the operating system boot entry can render the operating system inoperable On Net Surveillance Systems Inc does not assume any responsibility for changes you make to the operating system Adding the 3 GB Switch Select Start gt All Programs gt Accessories right click Command Prompt and select Run as administrator then click Continue E
25. lt gt Onss Recording Component RC C User Manual On Net Surveillance Systems Inc One Blue Hill Plaza 7 Floor PO Box 1555 Pearl River NY 10965 Phone 845 732 7900 Fax 845 732 7999 Web www onssi com 00042712 1456 RC C7 0 0C3 0 3 0 3 250 Legal Notice This product manual is intended for general information purposes only and due care has been taken in its preparation Any risk arising from the use of this information rests with the recipient and nothing herein should be construed as constituting any kind of warranty 2002 2012 On Net Surveillance Systems Inc All rights reserved OnSSI and the Eye logo are registered trademarks of On Net Surveillance Systems Inc Ocularis Ocularis Client Ocularis Client Lite Ocularis Video Synopsis NetEVS NetDVMS NetDVR ProSight NetGuard NetGuard EVS NetSwitcher NetMatrix NetCentral NetTransact NetPDA and NetCell are trademarks of On Net Surveillance Systems Inc All other trademarks are property of their respective owners On Net Surveillance Systems Inc reserves the right to change product specifications without prior notice Patents Applied For in the U S and Abroad RC C User Manual Table of Contents Table of Contents System amp Requirements cc cccecccecceeeceeeeeseeeseeeseeesecesscessaeeaeeaeeeaeeeseeneeseeaesesesneneneneeeneeees 1 SYSTEM OVS W Ranat ad tes esecadeset ava iA i aia i i a
26. not when users stop a PTZ camera s patrolling entirely When Ocularis Client users stop a PTZ camera s patrolling entirely the camera s patrolling will resume only when the Ocularis Client user selects to resume it PTZ on Event PTZ related properties are only available when you are dealing with a PTZ Pan Tilt Zoom camera When a PTZ camera supports preset positions it is possible to make the PTZ camera automatically go to a particular preset position when a particular event occurs When associating events with preset positions on a PTZ camera you are able to select between all events defined on your system you are not limited to selecting events defined on a particular hardware device 1 In the Events list in the left side of the window select the required event Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields 2 Inthe PTZ Preset Position list in the right side of the window select the required preset position For this purpose you can only use an event once per PTZ camera However different events can be used for making the PTZ camera go to the same preset position Example e Event 1 makes the PTZ camera go to preset position A e Event 2 makes the PTZ camera go to preset position B e Event 3 makes the PTZ camera go to preset position A If you later want to end the association between a particular event and a particular preset posit
27. otherwise to all cameras attached to the hardware device e MotionSensitivity optional number A value between 0 256 corresponds to using the Sensitivity slider when configuring motion detection settings in the Management Application If specified as for example MotionSensitivity1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectionThreshold optional number A value between 0 10000 corresponds to using the Motion slider when configuring motion detection settings in the Management Application If specified as for example MotionDetectionThreshold1 information relates to a specific camera otherwise to all cameras attached to the hardware device On Net Surveillance Systems Inc 190 RC C User Manual Configuration e MotionDetectioninterval optional number Lets you specify how often motion detection analysis should be carried out on video from the camera Specified in milliseconds The interval is applied regardless of the camera s frame rate settings If specified as for example MotionDetectionInterval1 information relates to a specific camera otherwise to all cameras attached to the hardware device e ServerName Name of the NVR that will appear when listed in clients Name must be unique and must not contain any of the following special characters lt gt amp e ServerPort Port number to use for communication between the NVR server and clients e
28. the upper limit is more than 2000 characters although such long camera names are hardly ever needed e Camera shortcut number Users of some clients can take advantage of keyboard shortcuts some of which let the users toggle between viewing different cameras Such shortcuts include numbers which are used to identify each camera Frame Rate e If the Camera Uses the MJPEG Video Format With MJPEG you can define frame rates for regular as well as speedup modes Regular Frame Rate Mode e Live frame rate Frame rate for viewing live video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field e Recording frame rate Frame rate for viewing recorded video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field Speedup Frame Rate Mode e Enable speedup frame rate The speedup feature lets you use a higher than normal frame rate if motion is detected and or an event occurs When you enable speedup further fields for specifying speedup details become available e Live frame rate Speedup frame rate for viewing live video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field The frame rate must be higher than the live frame rate specified under normal mode e Recording frame rate Speedup frame rate for viewing
29. type of hardware input event e Manual events Events may be generated manually by users selecting them in their clients These events are called manual events e Generic events Input may also be received in the form of TCP or UDP data packages which can be analyzed by the NVR and if matching specified criteria used to generate events Such events are called generic events e Timer events Timer events are separate events triggered by the hardware input event or manual event or generic event under which they are defined Timer events occur a specified number of seconds or minutes after the event under which they are defined has occurred Timer events may be used for a wide variety of purposes typically for stopping previously triggered actions Examples o A camera starts recording based on a hardware input event for example when a door is opened a timer event stops the recording after 15 seconds o Lights are switched on and a camera starts recording based on a manual event a timer event stops the recording after one minute and another timer event switches the lights off after two minutes e Things to Be Aware of Before you specify the use of hardware input and hardware output units on a hardware device verify that sensor operation is recognized by the hardware device Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the Ocularis release notes to verify th
30. with a label or name instead of a drive letter If using mounted drives critical system features may not work as intended you will for example not receive any warnings if the system runs out of disk space Prerequisites Shut down any existing surveillance software If upgrading read Upgrade from a Previous Version first 1 Insert the RC C software DVD wait for a short while click the RC C installation link then select required language Alternatively if you are installing a version downloaded from the internet run the downloaded installation file from the location you have saved it to Depending on your security settings you may receive one or more security warnings such as Do you want to run or save this file Do you want to run this software or similar When this is the case click the Run button 2 When the installation wizard starts click Next to continue 3 Read and accept the End User License Agreement then click Next 4 Ifan earlier RC C version or NetDVMS version 6 0a or later is present on the server you will be asked to accept that it is automatically removed during installation of the new version The automatic removal will not delete any existing recordings or configuration If asked we recommend answering Yes since this will ensure that old versions will not interfere with your new version NetDVMS versions earlier than 6 0 must be removed manually before installing RC C 5 Select Typical installatio
31. you will see a welcome page 3 Onthe welcome page select your required language in the menu in the top right corner Then go to the welcome page s Ocularis Client Installers section and click the required Ocularis Client language version link 4 Depending on your security settings you may receive one or more security warnings Do you want to run or save this file Do you want to run this software or similar exact wording depends on your browser version When this is the case accept the security warnings by clicking Run or similar exact button names depend on your browser version 5 The Ocularis Client Setup Wizard begins In the wizard click Next and follow the installation instructions With the Ocularis Client users Are provided with an Alert Manager to handle alerts received May classify and categorize alerts for incident case assignment May bookmark video clips for easy retrieval and sharing May manage their security environment by the viewing graphic maps of their site or campus May configure and use a Video Wall The Ocularis Client is accessed by logging into Ocularis Base in order to access NVR video On Net Surveillance Systems Inc 114 RC C User Manual Configuration Configuration Archiving As a camera s database becomes full its recordings will automatically be archived You are furthermore able to schedule archiving at particular points in time every day This way you can proactively a
32. 2 Inthe Software License Code SLC field overwrite the old SLC with the new SLC and click OK 3 You must close the Management Application When you open the Management Application again the new SLC will take effect Start amp Stop Services On an RC C server four services run in the background by default If required you can start and stop each service separately On Net Surveillance Systems Inc 196 RC C User Manual Configuration 1 In the Management Application s Navigation pane expand Advanced Configuration and select Services This will display the status of each service 2 You can now stop each service by clicking the Stop button When a service is stopped the button changes to Start allowing you to start the service again when required Tip Occasionally you may want to stop a service and start it again immediately after The Restart button allows you to do just that with a single click Use Dedicated Input Output Devices It is possible to add a number of dedicated input output I O hardware devices to the NVR see Add Hardware Devices For information about which I O hardware devices are supported see the release notes When such I O hardware devices are added input on them can be used for generating events in the NVR and these events can be used for activating output on the I O hardware devices This means that I O hardware devices can be used in your events based system setup in the same way as a camera
33. 2 Specify a user name User names must be unique and must not contain the following characters lt gt amp E Then specify a password and repeat it to be sure you have specified it correctly 3 Click OK 4 Specify General Access and Camera Access properties These properties will determine the rights of the user 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add Cameras amp Other Hardware Devices You add cameras and other hardware devices such as video encoders DVRs etc to the system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well The wizard offers you four different ways of adding cameras e Express recommended Scans your network for relevant hardware devices and helps you quickly add them to your system To use the Express method the RC C server and your cameras must be on the same layer 2 network that is a network where all servers cameras etc can communicate without the need for a router See Add Hardware Devices Wizard Express e Advanced Scans your network for relevant hardware devices based on your specifications regarding required IP ranges discovery methods drivers and device user names and passwords See Add Hardware Devices Wizard Advanced e Manual Lets you specify details about each hardw
34. AXIS 247S 172 On Net Surveillance Systems Inc AXIS 282 130 AXIS 2100 5 AXIS 21105 AXIS 2120 6 AXIS 2130 12 AXIS 2400 OSYS 3 AXIS 2400 Linux 8 AXIS 2400 8 AXIS 2401 OSYS 4 AXIS 2401 Linux 11 AXIS 2401 11 AXIS 2411 14 AXIS 2420 10 AXIS 2420 10 AXIS M1011 283 AXIS M1031 284 AXIS M3011 285 AXIS M3014 342 AXIS M7001 286 AXIS P1311 288 AXIS P3301 246 AXIS P3343 339 AXIS P3344 339 AXIS Q1755 278 AXIS Q6032 335 AXIS Q7401 256 AXIS Q7404 337 AXIS Q7406 268 Barix Barionet 272 Basler BIP 640c 242 Basler BIP 640c dn 242 Basler BIP 1000c 242 Basler BIP 1000c dn 242 Basler BIP 1300c 242 Basler BIP 1300c dn 242 Basler BIP 1600c 242 Basler BIP 1600c dn 242 Baxall X Stream 91 Bosch Dinion NWC 0455 10P 133 Bosch Dinion NWC 0495 10P 133 Bosch FlexiDome NWD 0455 133 Bosch FlexiDome NWD 0495 133 Bosch VideoJet X10 253 Bosch VideoJet X20 253 Bosch VideoJet X40 253 Bosch VIP X1 127 Bosch VIP X2 132 Bosch VIP X1600 162 Bosch VG4 Series 190 Canon VB C10 31 Canon VB C50FSi 212 Canon VB C50i 212 Canon VB C50iR 212 Canon VB C60 276 Canon VB C300 174 Canon VB C500 330 CBC Ganz ZN D2024 207 CBC Ganz ZN PT304L 179 CBC Ganz ZN PT304WL 179 Checkview 9128702 275 Cisco IPC 2500 322 Cisco IPC 4300 322 Cisco IPC 4500 322 Convision S1 21 Convision V100 21 Convision V200 20 Convision V6xx 7 Convision V7xx 7 D Link DCS1000 1000W 55 D Link DCS 2000 101 D Link DCS 2100 2100 2100G 101 D Link DC
35. Access Local IP Ranges and Language Support amp XML Encoding When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When using this option you configure client users separately from clients access see Add Individual Users Add User Groups and Configure User amp Group Rights On Net Surveillance Systems Inc 43 RC C User Manual Camera Specific Properties Properties Server Access e Server name Name of the server as it will appear in Ocularis Administrator Users with rights to configure Ocularis Base will see the name of the server when they add NVRs to the Ocularis Base e Local port Port number to use for communication between clients and the surveillance server The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization e Enable internet access Select the check box if the server should be accessible from the internet through a router or firewall If selecting this option also specify the public outside IP address and port number in the following fields When using public access the router or firewall used must be configured so requests sent to the public IP address and port are forwarded to the local inside IP address and port of the server e Internet address Lets you specify a public IP address or hostname for use when the server should be available from
36. B C HardwareAddress HardwareUsername HardwarePassword 192 168 200 220 AdminAccountUserName t0pSeCR3tpasowOr 192 168 200 221 AdminAccountUserName TOPsecretPASSw 192 168 200 222 RootaccountUserName ToPsEcReTpAsSw 109 162 3990 992 AdminA intl learNamea MPCICraTAa co nN ge NO 9 Hardwareaddress HardwareUsername HardwarePassword H 192 168 200 220 AdminaccountuserName t p5ecR3tpa5 192 168 200 221 AdminaccountUserName TOPsecrertPA 192 168 200 222 RootaccountUserNname TOPSECRETpAs 192 168 200 223 admina untusername TO Whichever method is used the following applies On Net Surveillance Systems Inc 62 RC C User Manual Wizard e The first line of the CSV file must contain the headers and subsequent lines must contain information about one hardware device each e Separators can be commas semicolons or tabs but cannot be mixed e All lines must contain valid values pay special attention to the fact that camera names user names etc must be unique and must not contain any of the following special characters lt gt amp 210 e There is no fixed order of values and optional parameters can be omitted entirely e Boolean fields are considered true unless set to 0 false or no e Lines containing only separators are ignored e Empty lines are ignored e Even though the CSV file format is generally ASCII only Unicode identifiers are allowed even without Unicode identifiers the entire file
37. Do What Database Resizing ae Delete Hardware DeviCeS 2 ccecccceb1s eves event nanan aed riviireeat ane aie acai a Ekda adaa area On Net Surveillance Systems Inc vii RC C User Manual Table of Contents Disable or Delete Cameras ai innn nde ae ee dl eee ee Export amp Import System Configuration Import Changes to Configuration Import DLKs Device License Keys Monitor Storage Space Usage Overview of Events Input amp Output Overview Of LOGS ceeeseeeeereeeeeeees Overview of Services Overview of Users and Groups Replace Hardware Devices Restore System Configuration from a Restore Point Specify a New SLC Software License Code 7 Start amp StOp SErvices naass indie adie ene avers iea dl nael ea naiaiite aia tenai da babe iaaea i rii deneden Use Dedicated Input Output Devices ee ee eeeseeeeeeeseeneeeeeeaeeeseeaeeeeesaecaeesaesaeeeaeeaeeseesaeeaeesaesaesaesaeeaeseeesaeseseaeeateneeeaeeaees View Video from Cameras in Management Application Contact I NFOrMATION ccccceeeceeeeeeeeeeeneneneeen On Net Surveillance Systems Inc viii RC C User Manual System amp Requirements System amp Requirements System Overview The RC C recording component provides a state of the art IP video surveillance system supporting the widest choice of network cameras and video encoders with the equipment connected to an office LAN or other
38. Hardware Devices Wizard Manual e Import from CSV file Lets you import data about cameras as comma separated values from a file an effective method if setting up several similar systems See Add Hardware Devices Wizard Import from CSV File Configure Hardware Devices Once you have added hardware devices you can specify edit device specific properties such as the IP address which video channels to use which COM ports to use for controlling attached PTZ Pan Tilt Zoom cameras etc 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices right click the required hardware device and select Properties 2 Specify Name amp Video Channels Network Device Type amp License and PTZ Device as required 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Use Dedicated Input Output Devices It is possible to add a number of dedicated input output I O hardware devices to the NVR see Add Hardware Devices For information about which I O hardware devices are supported see the release notes When such I O hardware devices are added input on them can be used for generating events in the NVR and these events can be used for activating output on the I O hardware devices This means that I O hardware devices can be used in your events based system setup in the same way as a camera When using some I O hardware de
39. Message fields indicates how many characters you have left to use Time between motion and database related SMSs per camera Minimum time in minutes to pass between the sending of each SMS notification per camera This interval only applies for SMS notification generated by detected motion or database related events SMS notification generated by other types of events will still be sent out whenever the events occur Examples If specifying 5 a minimum of five minutes will pass between the sending of each motion or database related SMS notification per camera even if motion or database events are detected in between If specifying 0 SMS notifications will be sent each time motion or database events are detected potentially resulting in a very large number of SMS notifications being sent If using the value 0 you should therefore consider cameras motion detection sensitivity settings e Test Lets you test your SMS notification configuration by sending a test SMS to the specified recipient Note that you must stop the Recording Server service while you perform the test remember to start the service again afterwards e Donot send SMS on camera failures If selected SMS notifications will not be sent if the NVR loses contact with a camera Otherwise automatic SMS notifications will be sent in such cases regardless of any scheduled SMS notification periods On Net Surveillance Systems Inc 47 RC C User Manual Events Input amp
40. PTZ camera between a number of preset positions To use patrolling you should normally have specified at least two preset positions for the PTZ camera in question To configure PTZ patrolling you basically select a patrolling profile in the Patrolling profiles list then specify required properties to define the exact behavior of the patrolling profile Tip Although it is technically not patrolling specifying a patrolling profile with only one preset position is possible A patrolling profile with only one preset position can when combined with scheduling be useful in two cases For moving a PTZ camera to a specific position at a specific time and for moving a PTZ camera to a specific position upon manual control of the PTZ camera Restart services after having made changes to PTZ settings When you have defined your patrolling profiles also remember to schedule the use of patrolling profiles keep in mind that patrolling can be overridden if users with the required rights manually operate PTZ cameras Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application On Net Surveillance Systems Inc 138 RC C User Manual Configuration e Patrolling Pro
41. Path Selection On Net Surveillance Systems Inc 24 RC C User Manual General Recording amp Storage Properties With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the path containing the video database is on one of the drives you have selected for archiving the attempt to archive that drive first will always be made If not the archive will be made to the archiving drive with the most available space at any time provided there is not a camera database using that drive Which drive that is may change during the archiving process and archiving may therefore happen to several archiving drives during the same process This fact will have no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic archiving paths for individual cameras If you use several surveillance servers in a master slave setup each surveillance server must archive to its own mapped location in order for archiving to work If you attempt to archive to the same mapped location for all the servers archiving will fail All properties on a white background are editable properties on a light blue background cannot be edited e Enable dynamic path selection archives Enables the use of dynamic path selection allowing you to select which paths you want to use The list of selectable paths initially represents all drives on the serv
42. Some examples using semicolon as the separator e camera is interpreted as camera e cam era is interpreted as cam era On Net Surveillance Systems Inc 191 RC C User Manual Configuration e camera is interpreted as camera e sis interpreted as an empty string e u cam era is interpreted as cam era where the character is not part of the interpretation but only used to show the start and end of the interpretation e camera is not valid as there are characters outside the quote encapsulated value e cam era is not valid as the two quotes are separated with a space and quotes cannot be nested e cam er a is not valid as you cannot nest quotes e cam era is not valid as there are characters outside the quotes Import DLKs Device License Keys You must have a Device License Key DLK for every hardware device cameras etc on your surveillance system Remember that you are allowed to install and use only the number of cameras covered by your license agreement regardless of your number of available DLKs For example a fully used four port video encoder counts as four cameras it will thus use four licenses even though its four cameras are connected through a single hardware device You get DLKs as part of the software registration process Upon registration all your DLKs are sent to you as a single dlk file attached to an e mail Importing the file is quick and easy and it will f
43. Systems Inc 126 RC C User Manual Configuration o Remove Lets you remove the item immediately to the left of a cursor positioned in the Event message expression field If you have not positioned the cursor in the Event message expression field the last item in the field will be removed e Event priority The same data package may be analyzed for different events The ability to assign a priority to each event lets you manage which event should be triggered if a received package matches the criteria for several events The priority must be specified as a number between 0 lowest priority and 1000 highest priority When RC C receives a TCP and or UDP package analysis of the packet will start with analysis for the event with the highest priority This way when a package matches the criteria for several events only the event with the highest priority will be triggered If a package matches the criteria for several events with an identical priority for example two events with a priority of 999 all events with the priority in question will be triggered e Event protocol Lets you select which protocol RC C should listen for in order to detect the event o Any Listen for and analyze packages using TCP as well as UDP protocol O TOP Listen for and analyze packages using TCP protocol only o UDP Listen for and analyze packages using UDP protocol only e Event rule type Lets you select how particular the analysis should be on received d
44. TCP IP network such as the internet RC C is the perfect choice for large installations It handles an unlimited number of cameras up to 64 simultaneously used cameras per server multiple servers and multiple sites It is a top performance solution well suited to the sophisticated high end of the security market The RC C recorder is e Compatible with a wide range of different IP video products from the leading manufacturers so you choose the hardware you want in combinations too e Dependable with robust and stable performance proven in operation on thousands of cameras worldwide e Flexible with remote access features that let you use the surveillance system from any place and at any time e Scalable with open architecture based on IP technology with ongoing development and regular updates which gives you long term returns on your surveillance investment e Future safe the IP network approach is the foundation for tomorrow available today Several Targeted Components in One RC C consists of a number of components each targeted at specific tasks and user types e The Management Application The application used by surveillance system administrators for configuring the RC C surveillance system server upon installation or whenever configuration adjustments are required for example when adding new cameras or users to the system e The Recording Server service A vital part of the surveillance system video streams are only tra
45. The wizard offers you four different ways of adding cameras e Express recommended Quickly scans your network for devices and helps you quickly add them to your system This method is quick and easy since it only scans for devices supporting device discovery and only on the part of your network subnet where the RC C server itself is located Device discovery is a method with which hardware devices make information about themselves available on the network Based on such information RC C can recognize relevant hardware devices on your network and thus include for example cameras but not printers in the scan To use the Express method the RC C server and your cameras must be on the same layer 2 network that is a network where all servers cameras etc can communicate without the need for a router See Add Hardware Devices Wizard Express e Advanced Scans your network for hardware devices based on your specifications regarding required IP ranges discovery methods drivers and device user names and passwords See Add Hardware Devices Wizard Advanced e Manual Lets you specify details about each hardware device separately A good choice if you only want to add a few hardware devices and you know their IP addresses required user names and passwords etc See Add Hardware Devices Wizard Manual e Import from CSV file Lets you import data about cameras as comma separated values from a file an effective method if setting
46. a new one Camera names must be unique and must not contain any of the following special characters lt gt amp 2 e Record on Lets you select under which conditions video from the camera should be recorded o Always Record whenever the camera is enabled and scheduled to be online the latter allows for time based recording o Never Never record Live video will be displayed but since no video is kept in the database users will not be able to play back video from the camera o Motion Detection Select this to record video in which motion is detected Unless post recording see the following is used recording will stop immediately after the last motion is detected o Event Select this to record video when an event occurs and until another event occurs Use of recording on event requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to record video in which motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns e Start Event Use when recording on Event or Motion Detection amp Event Select required start event Recording will begin when the start event occurs or earlie
47. all grid sections in the preview image This may be advantageous if you want to exclude motion detection in most areas of the image in which case you can simply clear the few sections in which you do not want to exclude motion detection e Clear All Lets you quickly clear all grid sections in the preview image e Auto Makes automatically detect areas with insignificant changes in individual pixels which should not be regarded as motion and automatically mark such areas for exclusion from motion detection As the automatic detection is based on an analysis of one second of video it may take a short while before you see the result The automatic detection takes place according to the sensitivity setting specified in step 2 In order for the Auto feature to work as intended it is therefore recommended that you go to step 2 and specify a sensitivity setting that matches your requirements before using the Auto feature 2 Use the two sliders for configuring motion detection e Sensitivity Determines how much each pixel must change before it is regarded as motion With a high sensitivity very little change in a pixel is required before it is regarded as motion Areas in which motion is detected are highlighted in green in the preview image Select a slider position in which only detections you consider motion are highlighted As an alternative to using the slider you may specify a value between 0 and 256 in the field next to the slider to cont
48. and there are existing recordings at the old locations you will be asked whether you want to move the recordings to the new locations recommended leave them at the old locations or delete them Click OK Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Restart all services Find Version amp Plug in Information Knowing the exact version of your system can be important if you require support want to upgrade your system etc In such cases you may also want to know which plug ins your system uses To view such information select About in the Management Application s Help menu Tip This way you can also specify a new Software License Code SLC if you have upgraded your or otherwise acquired a new SLC On Net Surveillance Systems Inc 85 RC C User Manual System Restoration amp Migration System Restoration amp Migration Restore System Configuration from a Restore Point Restore points allow you to return to a previous configuration state Each time a configuration change is applied in the Management Application either by clicking OK in a properties dialog or by clicking the Apply button in a summary pane a new restore point is created All restore points in the current and previous five sessions are stored and can be selected again A new session begins each time the Management Application is started as well as each time you save the whole co
49. attempt to delete a hardware device should the Management Application ask you to confirm that you want to delete the hardware device or should it delete the hardware device straight away without asking e You can use a maximum of 64 cameras at a time on a single RC C NVR server If you add more than 64 cameras should the Management Application warn you or not Note that selectable behavior may vary depending on the type of action 3 Click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Tip You can quickly restore default settings by clicking the button below the behavior list Configure Archiving Locations Before configuring archiving locations consider whether you want to use static or dynamic archiving paths e Static archiving paths mean that for a particular camera archiving will take place to a particular location and to that location only Static archiving paths are in principle individual for each camera but they do not have to be unique several cameras can easily use the same path if required You can configure static archiving paths for individual cameras or as part of the general Recording amp Archiving Paths properties o individual cameras In the Management Application s navigation pane expand Advanced Configuration expand Cameras and Storage Information double click the required camera select Recording amp Archiving Paths and specify
50. by default enabled meaning that they are able to transfer audio to RC C If required you can disable an individual microphone in which case no audio will be transferred from the microphone to the NVR e Microphone name Name of the microphone as it will appear in the Management Application as well as in clients If required you can overwrite the existing microphone name with a new one Microphone names must be unique and must not contain any of the following special characters lt gt amp In RC C it is only possible to have one microphone enabled at a time On some hardware devices audio can also be enabled disabled on the hardware device itself typically through the hardware device s own configuration web page If audio on a hardware device does not work after enabling it in the Management Application you should thus verify whether the problem may be due to audio being disabled on the hardware device itself Speaker Properties When you configure speakers properties are limited to e Enabled Speakers are enabled by default meaning that what is transmitted through the speakers is transferred to the NVR If required you can disable an individual speaker in which case it will not be possible to say anything through the speaker e Speaker name Name of the speaker as it will appear in the Management Application as well as in clients If required you can overwrite the existing speaker name with a new one Speaker na
51. camera otherwise to all cameras attached to the hardware device e MotionDetectionThreshold optional number A value between 0 10000 corresponds to using the Motion slider when configuring motion detection settings in the Management Application If specified as for example MotionDetectionThreshold1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectioninterval optional number Lets you specify how often motion detection analysis should be carried out on video from the camera Specified in milliseconds The interval is applied regardless of the camera s frame rate settings If specified as for example MotionDetectioninterval1 information relates to a specific camera otherwise to all cameras attached to the hardware device On Net Surveillance Systems Inc 154 RC C User Manual Configuration Most system integrators store hardware device information in spreadsheets like Microsoft Excel from which they can save the information as comma separated values in a CSV file These examples show hardware information in Excel 1 and when exported to a CSV file 2 note the header lines A B C HardwareAddress HardwareUsemame HardwarePassword 192 168 200 220 AdminAccountUserName tOp5eCR3tpa55w0r 192 168 200 221 AdminAccountUserName TOPsecretPASSwi 192 168 200 222 RootaccountUserName JToFeEcRoTpisSw 192 168 200 223 AdminAccountUserName MTPS3CAToa5S hiw N 9 Hardwareaddr
52. can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp 2 e Live FPS Lets you select the camera s live frame rate per second FPS e Record Keyframe Only Keyframes stored at specified intervals record the entire view of the camera whereas the following frames record only pixels that change this helps greatly reduce the size of MPEG files Select the check box if you only want to record keyframes Note that you can specify exceptions in the neighboring column e Record All Frames on Allows you to make exceptions if you have selected Record Keyframes Only o Motion Detection Select this to record all frames when motion is detected Two seconds after the last motion is detected the camera will return to recording keyframes only o Event Select this to record all frames when an event occurs and until another event occurs Requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to record all frames when motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns o Schedule only Select
53. check box to enable disable audit logging e Path Audit log files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista To specify another location for your audit log files type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder e Days to log A new log file is created for each day with audit logging enabled and client user activity A log file older than the number of days specified in the field is automatically deleted By default the log file will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field The current day s activity is always logged provided audit logging is enabled and there is user activity Therefore if you specify 1 you will keep one day plus the current day s activity Note that if you specify 0 zero audit log files will be kept indefinitely disk space permitting e Minimum logging interval Minimum number of seconds between logged events Specifying a high number of seconds between logged events may help reduce the size of the audit log Default is 60 seconds e In sequence timespan Number of seconds to pass for viewed images to be considered to be within the same sequence Specifying a high number of seconds may help limit the number of viewed sequences logged and thus reduc
54. devices cameras etc which are not present in the imported configuration You will be asked whether you want to delete or keep recordings from affected devices If keeping the recordings note that they will not be accessible until you add the affected devices to the NVR again Select the required option and click OK 4 In the Management Application s navigation pane expand Advanced Configuration and select Services 5 For the Recording Server and Image Server services respectively click the Restart button When the two services are restarted the imported configuration is applied Import Changes to Configuration On Net Surveillance Systems Inc 188 RC C User Manual Configuration It is possible to import changes to a configuration This can be relevant if installing many similar RC C NVRs for example in a chain of stores where the same types of server hardware devices and cameras are used in each location In such cases you can use an existing configuration typically a cloned configuration as a template for the other installations However since the stores installations are not exactly the same the hardware devices and cameras are of the same type but they are not physically the same and thus they have different MAC addresses there needs to be an easy way of importing changes to the template configuration This is when importing changes about hardware devices and cameras as comma separated values CSV from a file is so
55. different patrolling profiles on the same camera e PTZ Scanning PTZ scanning continuous panning is supported on a few PTZ cameras only e PTZ scanning Only available if your camera supports PTZ scanning Lets you enable PTZ scanning and select a PTZ scanning speed from the list below the check box Note that PTZ scanning only works for PTZ type 1 cameras where preset positions are configured and stored on the server If the camera is a PTZ type 2 camera and you import preset positions which have previously been defined and stored on the PTZ camera itself through the camera s own configuration interface PTZ scanning will stop working For more information about PTZ types see PTZ Preset Positions e Pausing PTZ Patrolling PTZ patrolling is automatically paused when the camera is operated manually as well as if PTZ on Event is used PTZ patrolling can furthermore be paused if motion is detected Tip Note that pause settings are tied to the selected patrolling profile This allows you the flexibility of having different pause settings for different patrolling profiles on the same camera e Pause patrolling if motion is detected To pause PTZ patrolling when motion is detected so that the PTZ camera will remain at the position where motion was detected for a specified period of time do the following 1 Select the Pause patrolling schedule if motion is detected check box 2 Select whether the PTZ camera should resume patrolling
56. drives or if moving is not possible deleted If no archives are present on the drive containing the camera s database the size of all camera databases on the drive will be reduced by deleting a percentage of their oldest recordings thus temporarily limiting the size of all databases When the Recording Server service is restarted upon such database resizing the original database sizes will be used You should therefore make sure that the drive size problem is solved Should the database resizing procedure take place you will be informed in log files and if set up through an e mail and or SMS notification Delete Hardware Devices IMPORTANT Deleting a hardware device will not only delete all cameras speakers and microphones attached to the hardware device It will also delete any recordings from cameras on the hardware device 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices right click the hardware device you want to delete and select Delete Hardware device 2 Confirm that you want to delete the hardware device and all its recordings 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Restart the Recording Server service If you find that deleting a hardware device is not the right thing to do consider disabling the individual cameras speakers or microphones connected to the hardware device in
57. eens eecee eee eceeeeeaeeeeaeseaeeseeeseaeeseeeseaeeseaeeceesseeseaeeseeeseaseseeeseessaeseeeeseeeseeesseeseneessaeenegs 168 Add a Timer Event 168 Add Audio Sources 168 Add Basic Users 169 Add Cameras amp Other Hardware Devices 169 Add Hardware Devices 169 Add User Groups w 170 Add Windows USef S ccceeeeeees 170 Apply or Save Configuration Changes 172 Archiving Extends Recording Storage sscecceseecceseserceneseeeeeeseeeeeereeeeeaes a 173 Storing Archives at Other Locations than the Default Archiving Directory ssssssssssssssrssrrsrrsrrsrrsrrsrrsrrsens 174 Dynamic Path Selection for Archives rm sasa tases seadcaeacadinde cinch eddie EEA a E AA AAAA A a a AAA A a Sahat 174 ArchIVINJAUdIO renees nenons penon ee a eE E ia e aaa a ea whale eels el ay aaa 175 Different Drives Automatic Archiving if Database Drive Runs Out of Disk Space 175 Same Drive Automatic Moving or Deletion of Archives if Running Out of Disk Space sceeeeee nent nent ee eeees 176 Archives Stored Locally or on Network DIiv S ccc e I nt tnnnini es Exported Archivos sinc iieri oe ees Sinn albinos wicca EEE cnt a ene nie nl alee a nine ine elle nein nu aint an ne elas nee ncn ena Change or Reset the Management Application Behavior Configure Archiving Locations ccseeeseseereeteeeeeeeeees ia Configure Archiving Schedules ceeceeseeseeeceeeeeeeeseeeeeeeeeaeeeeeaeesee
58. external drives only to local drives on the RC C server When archiving RC C automatically checks that space required for the data to be archived plus 1 GB of free disk space per camera is available at the archiving location If not the archive location s oldest data from the camera in question will be deleted until there is sufficient free space for the new data to be archived In short When estimating storage capacity required for archiving consider your organization s needs then plan for worst case rather than best case scenarios Tip OnSSI s Storage Calculator found in the Support section of the OnSSI website www onssi com can help you easily determine the storage capacity required for your surveillance system e Automatic Response if Running Out of Disk Space The archiving function can automatically respond to the threat of running out of disk space Two scenarios can occur depending on whether the camera database drive is different from or identical to the archiving drive Different Drives Automatic Archiving if Database Drive Runs Out of Disk Space In the case where the RC C server is running out of disk space and o the archiving drive is different from the camera database drive and archiving has not taken place within the last hour archiving will automatically begin in an attempt to free up disk space This will happen regardless of any archiving schedules The server is considered to be running out of disk space if
59. grid 2 To define exclude regions drag the mouse pointer over the required areas in the preview while pressing the mouse button down Left mouse button selects a grid section right mouse button clears a grid section Selected areas are highlighted in blue Tip With the Set All button you can quickly select all grid sections in the preview This may be advantageous if you want to disable motion detection in most areas of the preview in which case you can simply clear the few sections in which you do not want to disable motion detection On Net Surveillance Systems Inc 158 RC C User Manual Configuration Motion detection is a key element in most surveillance systems Depending on your further configuration motion detection settings may determine when video is recorded that is saved on the surveillance system server when notifications are sent when output such as lights or sirens is triggered etc Time spent on finding the best possible motion detection settings for each camera may thus help you later avoid unnecessary recordings notifications etc Depending on the physical location of your cameras it is often a good idea to test motion detection settings under different physical conditions day night windy calm weather etc Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop
60. hardware device with the MAC address 00408c51e181 would be stored at the following destination C VideoData Archives 00408c51e181_2 2011 12 31 23 15 If the hardware device to which the camera is attached is not a video encoder device with several channels the video encoder channel indication in the sub directory named after the hardware device s MAC address will always be _ 7 example 00408c51e181_ 1 Storing Archives at Other Locations than the Default Archiving Directory You are of course also able to store archives in other directories than the default archiving directory However you cannot archive to external drives only to a local drive on the computer running RC C You are of course also able to store archives at other locations than locally in the default archiving directory You may for example specify that your archives should be stored on a network drive When archiving to other locations than the default archiving directory RC C will first temporarily store the archive in the local default archiving directory then immediately move the archive to the archiving location you have specified While this may at first glance seem unnecessary it greatly speeds up the archiving procedure and reduces delays in case of network problems Archiving directly to a network drive would mean that archiving time would vary depending on the available bandwidth on the network First storing the archive locally then moving it ensures that a
61. high sensitivity even the slightest change in a pixel will be regarded as motion 3 Adjust the Motion slider so that motion detection is only triggered by the required level of motion The selected motion level is indicated by the black vertical line in the Motion level bar above the sliders The black vertical line serves as a threshold When motion is above that is to the right of the selected level the bar changes color from green to red indicating a positive motion detection As an alternative to using the slider you may specify a value between 0 and 10000 in the field next to the slider to control the motion setting Tip Technically the slider determines how many pixels must change before it is regarded as motion The more you drag the slider to the left the fewer pixels must change before you have a positive motion detection Thus as a rule of thumb the more you drag the slider to the left the more positive motion detections you are likely to get since less change will be required to trigger a positive motion detection The number of positive motion detections may subsequently affect the amount of video you record the amount of notifications you receive etc 4 Motion detection is vital on most surveillance systems but also consumes system resources on the surveillance server In the Detection interval field you are therefore able to specify how often motion detection analysis should be carried out on video from the camera Def
62. icon 2 Inthe menu that appears select About e Exit the Recording Server Manager On Net Surveillance Systems Inc 109 RC C User Manual Recording Server Manager 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Exit Recording Server Manager Tip If you later want to re open the Recording Server Manager go to Windows Start menu and select All Programs gt Startup gt Recording Server Manager NetMatrix Monitor Introduction The NetMatrix Monitor is one of two applications which can be used for viewing NetMatrix triggered video from the surveillance system the other option is the Ocularis Client OnSSI Viewer Introduction The OnSSI Viewer is a stand alone application that allows users to browse and playback video recordings This Viewer also lets you print still images send still images via e mail and export entire video and audio sequences in many formats The Viewer can be accessed If you work on the surveillance system server You access the Viewer from Windows Start menu Select Start gt All Programs gt RC C gt Viewer If you have received video evidence material from a surveillance system This is typically the case if you are a police officer and internal or external investigator or similar When surveillance system operators export video evidence they are able to include the Viewer with the exported evidence This is a great advantage for the recipien
63. in ViewGroups Note that some of the files folders may not exist if upgrading from old software versions DO NOT MANUALLY REMOVE NETDVMS Manual Removal of NetDVMS is NOT Necessary and can cause data loss during the upgrade e Remove the Current Version In most cases you do not need to manually remove the old version of RC C before you install a new version The old version is removed when you install the new version Note however that when upgrading from NetDVMS versions earlier than 6 0 this software must be removed manually before installing the new version of RC C e Install the New Version Run the installation file for the new software version Select the installation options that best fit your needs Note During the installation you will be prompted about uninstalling the older version This includes uninstalling NetDVMS Click Yes to confirm the deletion The installation will also prompt you for your new RC C NVR SLC e Import New DLKs 1 Open the Management Application 2 Inthe Management Application s File menu select Import DLKs 3 Browse to the location at which you have saved the received dlk file select the file and click Open All the new DLKs are now imported into RC C Verify Upgrade Data Verify the upgrade to confirm whether your configuration was updated On Net Surveillance Systems Inc 6 RC C User Manual 1 Open the Management Application if is isn t already open 2 Expa
64. it Use the Configure events list located below the other fields e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message Output When you configure video and recording for specific cameras you are also able to associate a camera with particular hardware output for example the sounding of a siren or the switching on of lights Associated output can then be activated automatically when motion is detected in video from the camera or manually when Ocularis Client users with the necessary rights view live video from the camera 1 In the Available output list select the required output It is only possible to select one output at a time On Net Surveillance Systems Inc 136 RC C User Manual Configuration Tip If you have not yet defined any suitable output you can quickly do it Use the Configure Output button located below the other fields
65. latest event is always displayed prominently e Disconnect Disconnects any existing connection Use if a particular event should cause video to stop being displayed in the NetMatrix recipient even if they are not yet old enough to be pushed out of the NetMatrix recipient If you selected Connect another red exclamation mark will indicate that there is still some configuration to be done Right clicking an action lets you select which camera to apply the action on 3 GD Alam Cortsal Display BH Motion on Back Doce West Wing Camera b Coe Delete Connect Back Ooor East Wing Camera Back Door West Wing Camera b Executive Office Cam Camera 1 fpr In this example we have specified that when motion is detected on Camera b the selected NetMatrix recipient should connect to Camera b B Alam Cental Dapit Moton on Back Dox Wert Wing Camera b Pp Cornect Doo Wert Cones On Net Surveillance Systems Inc 76 RC C User Manual Scheduling Scheduling Configure General Scheduling and Archiving The general Scheduling and Archiving feature lets you configure when e Cameras should be online that is transfer video to the NVR e Cameras should use speedup that is use a higher than normal frame rate e You want to receive any e mail and or SMS notifications regarding cameras e PTZ cameras should patrol and according to which patrolling profile e Archiving should take place Do the following 1 In t
66. local database logs in with a client the user should not specify any server name PC name or IP address as part of the user name When a user who has been added from a local database logs in with a client the user should not specify any server name PC name or IP address as part of the user name Example of a correctly specified user name USER001 Example of an incorrectly specified user name PC001 USER001 The user should of course still specify a password and any required server information On Net Surveillance Systems Inc 97 RC C User Manual Users Add User Groups User groups are logical groups created and used for practical purposes in the Management Application only They are not in any way connected with user groups from central directory services such as for example Active Directory By grouping users you can specify rights for all users within a group in one step If you have many users performing similar tasks this can save you significant amounts of work Make sure you add groups before you add users You cannot add existing users to groups 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New User Group 2 Specify a name for the group Group names must be unique and must not contain the following characters lt gt amp 3 Click OK 4 Specify General Access and Camera Access properties These properties will determine the rights o
67. make sure that the Use simple files sharing check box is cleared When ready click OK and close the window Add Windows users the following way 1 Click the Add Windows User button to open the Select Users or Groups dialog Select Users or Groups axi Select thet object type Users ot Groupe Obiect Types Erom thes location MMO1232 Locston Erter the object names to select cli Advanced Cancel Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names to select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several user names separate each name with a semicolon Example Brian Hannah Karen Wayne 3 When ready click OK When a user who has been added this way logs in with a client the user should not specify any server name PC name or IP address as part of the user name Example of a correctly specified user name USERO001 Example of an incorrectly specified user name PC001 USER001 The user should of course still specify a password and any required server information The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools men
68. much storage space you have used and free on your system Drive Letter representing the drive in question for example C e Path Path to the storage area for example C or OurServer OurFolder OurSubfolder e Usage What the storage area is used for for example recording or archiving e Drive Size Total size of the drive e Video Data Amount of video data on the drive e Other Data Amount of other data on the drive e Free Space Amount of unused space left on the drive Tip To quickly view disk space usage in a pie chart format select the line representing the drive you are interested in Timer Event Timer event name Specify a name for the event Timer event names must be unique and must not contain the following characters lt gt amp Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details Timer event occurs after Lets you specify the amount of time that should pass between the main event occurring and the timer event in seconds or minutes User Information e User name Only editable if the selected user is of the type basic user Lets you edit the user name User names must be unique and must not contain the following characters lt gt amp e Password Only editable if the selected user is of the type basic user Lets you edit the password Remember to repeat the password to be sure you
69. must not be longer than eight digits GenerateNewCameraGuid optional number Lets you specify whether to generate a new GUID for a camera this is especially relevant if using a cloned configuration as your template since all GUIDs are removed from cloned configurations If specified as for example GenerateNewCameraGuid1 information relates to a specific camera otherwise to all cameras attached to the hardware device Any character means yes generate a new GUID PreBufferLength optional number Required length in seconds of pre recording If specified as for example PreBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device PostBufferLength optional number Required length in seconds of post recording If specified as for example PostBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device RecordingPath optional number Path to the folder in which a camera s database should be stored If specified as for example RecordingPath1 information relates to a specific camera otherwise to all cameras attached to the hardware device ArchivePath optional number Path to the folder in which the camera s archived recordings should be stored Remember that an archiving path is only relevant if not using dynamic paths for archiving If specified as for example On Net Surveillance Systems Inc 88 RC C User Manua
70. or events you can also use scheduling to configure speedup based on particular periods of time If you prefer such time based speedup you should still enable the use of speedup by selecting the Enable speedup check box e Ifthe Camera Uses the MPEG Video Format With MPEG you can define frame rate as well as when to record keyframes or all frames e Frame rate per second Frame rate for viewing live and recorded video from the camera Select number of frames per second e Record keyframes only Keyframes stored at specified intervals record the entire view of the camera whereas the following frames record only pixels that change this helps greatly reduce the size of MPEG files Select the check box if you only want to record keyframes Note that you can specify exceptions if motion is detected or events occur see the following On Net Surveillance Systems Inc 124 RC C User Manual Configuration e Record all frames on motion Allows you to make exceptions if you have selected record keyframes only Select this check box to record all frames when motion is detected Two seconds after the last motion is detected the camera will return to recording keyframes only e Record all frames on event Allows you to make exceptions if you have selected record keyframes only Select this check box to record all frames when an event occurs and until another event occurs Use of this feature requires that events have been defined and that you select
71. or hostname of server port number default is 80 Example http 123 123 123 123 80 2 From the welcome page that appears download and install the latest Ocularis Client version The installation wizard will prompt you to uninstall any older versions it may find On Net Surveillance Systems Inc 8 RC C User Manual Getting Started Getting Started Features RC C 7 0 has many features e Single Management Application A single Management Application has a modern look and an intuitive and consistent grouping of features e Wizard driven configuration guides you through common RC C tasks such as adding of hardware devices and cameras to the system Detailed configuration without wizards is of course also possible e Multi instance configuration through templates or quickly editable summaries lets you configure multiple cameras events users etc in one step e No separate Image Server Administrator application all management of users rights etc takes place directly in the Management Application Among the less noticeable yet important features you will find that e Archiving takes place automatically See Archiving Extends Recording Storage e You can view live video in the Management Application See View Video from Cameras in Management Application e You can control all surveillance services in the Management Application See Overview of Services e Configuration is stored as XML Your existi
72. passwords See Add Hardware Devices Wizard Advanced e Manual Lets you specify details about each hardware device separately A good choice if you only want to add a few hardware devices and you know their IP addresses required user names and passwords etc See Add Hardware Devices Wizard Manual e Import from CSV file Lets you import data about cameras as comma separated values from a file an effective method if setting up several similar systems See Add Hardware Devices Wizard Import from CSV File Configure Video amp Recording Once you have added hardware devices and attached cameras you can configure video and recording settings in three ways e Wizard driven Guided configuration which lets you specify video recording and archiving settings for all your cameras See Configure Video amp Recording Wizard and Adjust Motion Detection Wizard e General Lets you specify video recording and shared settings such as dynamic archiving paths and whether audio should be recorded or not for all your cameras 1 In the Management Application s navigation pane expand Advanced Configuration right click Cameras and Storage Information and select Properties 2 Specify properties as required for Recording amp Archiving Paths Dynamic Path Selection Video Recording Frame Rate MJPEG Frame Rate MPEG Audio Selection and Audio Recording When ready click OK 3 Save your configuration changes by clicking the S
73. period of time for which an e mail alert schedule has been defined Recipient s Lets you specify the e mail addresses to which e mail notifications should be sent If specifying more than one e mail address separate the e mail addresses with semicolons example aa aa aa bb bb bb cc cc cc Test Sends a test e mail to the specified recipients If Include Image is selected the test e mail will have a still test JPEG image attached Subject text Specify required subject text for e mail notifications Message text Specify required message text for e mail notifications Note that camera information as well as date and time information is automatically included in e mail notifications Include Image Select check box to include still images in e mail notifications When selected a still JPEG image from the time the triggering event occurred will be attached to each e mail notification Do not send e mail on camera failures f selected e mail notifications will not be sent if the NVR loses contact with a camera Otherwise automatic e mail notifications will be sent in such cases regardless of any scheduled e mail notification periods Time between motion and database related e mails per camera Minimum time in minutes to pass between the sending of each e mail notification per camera This interval only applies for e mail notification generated by detected motion or database related events e mail notification generated by other types
74. periods of time See Configure General Scheduling amp Archiving and Configure Camera specific Schedules O Configure Users Now specify an account for whomever should be able to access your RC C system Do you want password protection for the Management Application If required you can add users from Active Directory thus leveraging your organization s existing user data See Quickly Add Users with Access to All Cameras Add Individual Users Add User Groups and Configure User amp Group Rights O Install Ocularis Base Proceed with the installation of all Ocularis components and license Ocularis Base See the Ocularis Installation and Licensing Guide available in the installation package DVD or from www onssi com O Configure Ocularis Base Launch the Ocularis Administrator application to configure Oculars Base See the Ocularis Administrator s User Manual for more details The above list represents the configuration steps that most administrators are likely to cover Additional configuration is of course likely due to continued tweaking of system settings for cameras and storage Note that the behavior of the Management Application can be customized Descriptions here are however always based on the Management Application s default behavior On Net Surveillance Systems Inc 10 RC C User Manual Getting Started Access the Management Application Access the Management Application by double clicking the Management Application de
75. plus 1 GB per camera or o the available disk space goes below 75 MB plus 10 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 175 MB 75 MB plus 10 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 5 disk space left IMPORTANT You will lose the data deleted as part of the database resizing process When the recording server is restarted upon such database resizing the original database sizes will be used You should therefore make sure the drive size problem is solved or adjust camera database sizes to reflect the altered drive size Tip Should the database resizing procedure take place you will be informed on screen in the Ocularis Client in log files and if set up through an e mail and or SMS notification 3 First RC C will attempt to delete archives This will happen if o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to b
76. recording component RC C and the Ocularis Base component Each are entered in different locations Ocularis Base SLC This SLC is entered in the Ocularis Licensing Activation application See the Ocularis Installation amp Licensing Guide for further instructions Recording Component RC C SLC If you have upgraded to a new software version or otherwise acquired a new Software License Code SLC do the following to use the new SLC 1 Inthe Management Application s Help menu select About 2 Inthe Software License Code SLC field overwrite the old SLC with the new SLC and click OK 3 You must close the Management Application When you open the Management Application again the new SLC will take effect On Net Surveillance Systems Inc 66 RC C User Manual Logging Logging Overview of Logs The RC C recorder is able to generate various logs e Log Types e Management Application log files These files log activity in the Management Application A new log file is created for each day the Management Application is used You cannot disable this type of logging Management Application log files are named according to the structure AdminYYYYMMDD log for example Admin20101231 log e Recording Server service log files These files log Recording Server service activity A new log file is created for each day the service is used You cannot disable this type of logging Recording Server service log files are named accordi
77. required properties If configuring your cameras through the Configure Video amp Recording Wizard the wizard also lets you configure archiving paths Configure Archiving Schedules automatically archives recordings if a camera s database becomes full in earlier versions this was an option configured individually for each camera You are furthermore able to schedule archiving at particular points in time up to 24 times per day with minimum one hour between each one This way you can proactively archive recordings so databases will never become full As a rule of thumb the more you expect to record the more often you should archive There are two ways in which to configure archiving schedules e While configuring your cameras through the Configure Video amp Recording Wizard in which case you configure your archiving schedule on the wizard s Drive selection page e As part of the general Scheduling amp Archiving Paths properties In the Management Application s navigation pane expand Advanced Configuration right click Scheduling and Archiving select Properties select Archiving in the dialog and specify required properties On Net Surveillance Systems Inc 18 RC C User Manual Audio Audio Add Audio Sources You add cameras and other hardware devices such as video encoders DVRs etc to the system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device th
78. servers and ports mapped accordingly in the routers or firewalls used if the slave servers are to be accessed from the internet When using a master slave setup remote users and their rights must be defined in the Management Application s Users section on the master server as well as on each of the slave servers Only cameras to which a remote user has been given access will be visible to the user regardless of whether the cameras are connected to the master server or to one of the slave servers If they are to be accessed from the internet Public Access must be enabled on all involved servers and ports must be mapped accordingly in the routers and or firewalls used e Not Using a Master Slave Setup If you do not wish to use a master slave setup for example because there is only a single NVR server on your system simply do not specify anything in the Master Slave Setup section On Net Surveillance Systems Inc 72 RC C User Manual Master amp Slave Servers e Frequently Asked Questions About Using Master Slave How many master servers can use in a master slave setup An unlimited number of servers per SLC Software License Code specified during installation can be designated as master servers If required for example if your organization is very large and spread over many geographical locations or in case you want to create a redundancy solution this allows you to use several master servers in a master slave setup How many s
79. start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event The camera will begin recording all fames when the start event occurs e Stop event Select required start event When the stop event occurs the camera will return to recording keyframes only General Access When adding or editing basic users Windows users or groups the following defines the general access settings In most cases these settings should be set for full access when using Ocularis e Live Ability to view Live video in the Ocularis Client or Ocularis Client Lite e Playback Ability to view video in Browse mode in the Ocularis Client or Ocularis Client Lite e Setup Ability to view the Setup tab in Ocularis Client Lite e Edit shared views Ability to create and edit views in shared groups in Ocularis Client Lite Views placed in shared groups can be accessed by every user If a user group does not have this right shared groups will be protected indicated by a padlock icon in Ocularis Client Lite e Edit private views Ability to create and edit views in private groups in Ocularis Client Lite Views placed in private groups can only be accessed by the user who created them If a user group does not have this right private groups will be protected indicated by a padlock icon in Ocularis
80. tact vencdva deena onea teeta deni N ap ened iidr daiar aadis agentes 75 Sehed ling i ai nanana aiaiai adia aad diiin ra daaa deat Negedte adeedee tegen AEN A Configure General Scheduling and Archiving ccc ccecceceeceeeeeeeeeseeeeeeeeeeeeeeeceaeceeeeeeaeseaeeseeeeeaaeeneeseaeesneeseaeeseeseaeesieeeee 77 Configure Camera specific Schedules eceseeseseeseeeeeeceeseeeceeseceeeaeeaeessecseeeaeeaessaeeseesaeeaessaesaessasseeeaecseeeaeeaeseaseaeeeeeeaees 77 General Scheduling Properties 2 cccsccescceeeceeeceeeeeeeeeeeeeseeeseeeseeesaeeseeessaeeseesseesaees 78 Scheduling All Cameras eranen n e E ASE e EEEE ea dates EEEE NE AE EENE TEETAN 78 SCheCUIiMG Options EEEE ET A T E E E E E 78 PANIA REEE EEE cee cd E A AE 79 Camera specific Scheduling Properties weit et ner bartonc eh A ra wate araoa e aea bara bhi ei i Online Period nsira ean aane Speedup E Mail Notification SMS Notification PTZ Patrolling Servisi iniaenoi Overview of Services StartB StOp Services niiin iina ia aaa a td aAA a Eda eaa ois ae diene vidi dh ieee dances SY SCCM ences tosis sects recca toe tee a a te an aa ia EE tue dcsbegesnaunestuesvatePenauassctoe des tusveredeceeneneteate Configure Default File Paths Find Version amp Plug in Information System Restoration amp Migration 2 2 c ccscccseceeeceeseeeseeeeceeeeeseeeseeeseeesaeesseessaeesenensees 86 Restore System Confi
81. the total amount of time for which you want to keep recordings from a camera that is recordings in the camera s database as well as any archived recordings In other NVRs time limits may need to be specified separately for the database and archives with RC C you only specify one time limit the retention time You specify retention time as part of the general Recording amp Archiving Paths properties Scheduled archiving is possible up to 24 times per day In the following topics archiving is explained in detail If you want to configure archiving immediately see Configure Archiving Locations and Configure Archiving Schedules e Benefits of Archiving With archiving recordings are moved from their standard location to another location the archiving location With archiving the amount of recordings you are able to store is limited only by the available hardware storage capacity By default recordings are stored in RC C s database for each camera The database for each camera is capable of containing a maximum of 600000 records or 40 GB However the maximum size of a database is not in itself very important If a database for a camera becomes full its content will automatically be archived freeing up space in the database Having sufficient archiving space is more important see Storage Capacity Required for Archiving in the following In addition to automatic archiving when a database becomes full you can schedule archiving t
82. the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application Depending on your needs you can configure motion detection settings individually for each camera or for several cameras in one step Use the list in the left side of the wizard window to select cameras to select several cameras at a time press CTRL or SHIFT on your keyboard while selecting When you select a camera you will see a preview from that camera If you select several cameras you will see a preview from the last camera you select When you have selected one or more cameras do the following to configure their motion detection settings 1 Note any green areas in the preview Green areas are areas with motion Example 2 Adjust the Sensitivity slider so that irrelevant background noise is filtered out and only real motion is shown in green As an alternative to using the slider you may specify a value between 0 and 256 in the field next to the slider to control the sensitivity setting Tip Technically the slider determines how much each pixel must change before it is regarded as motion With a high sensitivity very little change in a pixel is required before it is regarded as motion If you find the concept of sensitivity difficult to grasp try dragging the slider to the left The more you drag the slider to the left the more of the preview becomes green This is because with a
83. this to record all frames according to the camera s speedup schedule only e Start Event Select required start event The camera will begin recording all frames when the start event occurs e Stop Event Select required start event The camera will return to only recording keyframes when the stop event occurs e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras mes panno only a Start Event Stop Event Event Manual Evert 1 Manual Event 2 v Example Only the selected value is applied using this method e Set all template values on selected cameras Lets you apply all values from the template to selected cameras On Net Surveillance Systems Inc 29 RC C User Manual General Recording amp Storage Properties Audio Selection With a default microphone and or speaker selected for a camera audio from the microphone and or speaker will automatically be used when video from the camera is viewed Note that all of the Audio Selection properties can also be specified individually for each camera e Template The template can help yo
84. through a time server Audio With a default microphone and or a speaker selected for a camera audio from the microphone and or a speaker will automatically be used when video from the camera is viewed If a microphone and or a speaker is attached to the same hardware device as the camera that microphone speaker will be the camera s default microphone speaker if you do not select otherwise On Net Surveillance Systems Inc 33 RC C User Manual Camera Specific Properties Tip Note that you can select a microphone and or a speaker attached to another hardware device than the selected camera itself e Default microphone Select required microphone e Default speaker Select required speaker The ability to select a default microphone and or a speaker for the camera requires that at least one microphone and or speaker has been attached to a hardware device on the surveillance system Recording Settings The term recording means saving video and if applicable audio from a camera in the camera s database on the surveillance system server Video audio is often saved only when there is a reason to do so for example as long as motion is detected when an event occurs and until another event occurs or within a certain period of time When you configure video and recording for specific cameras recording properties include e Always Record whenever the camera is enabled and scheduled to be online the latter allows for time based recor
85. to a specific camera otherwise to all cameras attached to the hardware device e ArchivePath optional number Path to the folder in which the camera s archived recordings should be stored Remember that an archiving path is only relevant if not using dynamic paths for archiving If specified as for example ArchivePath1 information relates to a specific camera otherwise to all cameras attached to the hardware device e RetentionTime optional number Required retention time in minutes Remember that retention time is the total of recording time plus archiving time If specified as for example RetentionTime1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegLiveFrameRate optional number Required MJPEG live frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If specified as for example MjpegLiveFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegRecordingFrameRate optional number Required MJPEG recording frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If you need to specify a value which includes a decimal separator use the full stop character example 7 62 If specified as for example MjpegRecordingFr
86. use a descriptive and unambiguous name NetMatrix recipient names must not contain the following characters lt gt amp e Address P address of the NetMatrix recipient used when adding a new NetMatrix recipient or editing the properties of an existing one e Port Lets you specify the port number to be used when sending commands to the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one The NetMatrix recipient will listen for commands on this port By default port 12345 is used you can of course specify another port number e Password Lets you specify the password to be used when communicating with the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one e NetMatrix recipient is an Ocularis Client Select check box if the NetMatrix recipient in question is an Ocularis Client NetMatrix triggered live video may also be displayed in RC C users Ocularis Clients If an Ocularis Client is used distribution of the NetMatrix triggered live video takes place slightly differently e Clear Removes any content in the Name Address and Password fields e Update Updates the properties of the selected NetMatrix recipient with the changes made during editing Available only if you have edited the properties of an existing NetMatrix recipient e Add Adds the new NetMatrix recipient to the list Available only if you have
87. you control the aggressiveness of reconnection attempts If the NVR loses the connection to a camera by default it will attempt to re establish the connection after ten seconds In some environments for example if using vehicle mounted cameras through wireless connections camera connections may frequently be lost and you may want to change the aggressiveness of such reconnection attempts Server Access Server name Name of the server as it will appear in Ocularis Administrator Users with rights to configure Ocularis Base will see the name of the server when they add NVRs to the Ocularis Base Local port Port number to use for communication between clients and the surveillance server The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization Enable internet access Select the check box if the server should be accessible from the internet through a router or firewall If selecting this option also specify the public outside IP address and port number in the following fields When using public access the router or firewall used must be configured so requests sent to the public IP address and port are forwarded to the local inside IP address and port of the server Internet address Lets you specify a public IP address or hostname for use when the server should be available from the internet Internet port Lets you specify a port number for use when the should be
88. you record audio it is important that you note the following Only audio from microphones is recorded Only incoming audio that is audio recorded by microphones attached to hardware devices is recorded Outgoing audio that is what Ocularis Client operators say when they talk through speakers attached to hardware devices is not recorded Audio recording affects video storage capacity Audio is recorded to the associated camera s database It is important to keep in mind that the database is likely to become full earlier if recording audio and video than if only recording video The fact that the database becomes full is not in itself a problem since the NVR automatically archives data if the database becomes full However there is likely to be a greater need for archiving space if you record audio o Example If using MPEG4 each one second video GOP Group Of Pictures will be stored in one record in the database Each second of audio will also be stored in one record in the database When this is the case the database s video storage capacity will be halved because half of the database s records will be used for storing audio Consequently the database will run full sooner and automatic archiving will take place more often than if you were only recording video o Example If using MJPEG audio is stored in one record for every JPEG for as long as the audio block size does not exceed the time between the JPEGs The database s video st
89. 0 Frame Rate MJPEG Frame Rate MPEG we 123 Fraime RAC svesserscdendecicecutiedcesessedueances csecadecaceavgavtssiccsadccsseabied aca cgseieaa cased sceeteadvedaveselcaadestoteca EE 124 General ACCESS toresecstecessevsesvack n teh destevte teat enetune iter ile dbnwtouceutateedewtavhenteedenb avin e aLi 125 Generic Event we 125 Group Information wa 127 Hardware Input Event vw 127 Hardware Output w 128 Language Support amp XML Encoding 128 LoCalIP RANGCS i ieis seccet didberrsecedsensencsieceovseascedsaveabenvasevseseubicgedtcevabecsedechicduseyssnvedzevecdeuVarvatevegdesvis i i aai 128 EOS a aA AAE aAA Aa TEE a tedy een EEEN A aA aE E e aaa aE ASEESSA tenses 129 Manual Event 130 Manual Recording 0 130 Masteraind Slave Propertios s seinare seaelscaseedeharedoiesdipceghdssbeoneeuesdlpeutdecenspntenesdeyopddersecpiasuceeetopassegstdseteuerslegeenisnnenadess 130 Master Server Properties 0 0 ccc UE I IE I nnn nnn nana ea eaeneas 130 Slave Server Properties bi Microphone PrOpertieS issccceesdisetceescazsisostenseceshestasessesecsyederedustseqsoincktecsevss seized eubesdecvasiyseadeiasvscecsussnsetuauis esensus entdeesd Motion Detection amp Exclude REGIONS csssesesscsssccessesessscssenenseseaessssesssesesescssesonsensaeseseeseeseesssceseesensesseesoneesntenees 131 Name amp Video Channels we 133 NetCentral n se 133 NetMatri
90. 02 00 DST to 01 00 standard time repeating that hour and the day thus has 25 hours In that case you will reach 01 59 59 then immediately revert back to 01 00 00 If the system did not react it would essentially re record that hour so the first instance of for example 01 30 would be overwritten by the second instance of 01 30 Because of this will forcefully archive the current video in the event that the system time changes by more than five minutes The first instance of the 01 00 hour will not be viewable directly from clients However the data is recorded On Net Surveillance Systems Inc 91 RC C User Manual Stability Improvement Stability Improvement Microsoft Windows 32 bit operating systems can address 4 GB of virtual memory The operating system kernel reserves 2 GB for itself and each individual running process is allowed to address another 2 GB This is Windows default setting and for the vast majority of installations it works fine The main components of the server the Recording Server service and the Image Server service have been compiled with the LARGEADDRESSAWARE flag This means you can optimize the memory usage of RC C s Recording Server and Image Server services by configuring your 32 bit Windows operating system so that it restricts the kernel to 1GB of memory leaving 3GB of address space for processes compiled with the LARGEADDRESSAWARE flag This should improve the stability of especially the Rec
91. 0S 105 ACTi SED 2120 2120T 105 ACTi SED 2130 105 ACTi SED 2140 105 ACTi SED 2200 105 ACTi SED 2300Q 117 ACTi SED 2310Q 117 ACTi SED 2320Q 117 ACTi SED 2400 105 RC C User Manual ACTi SED 2410 141 ACTi SED 2420 141 ACTi SED 2600 152 ACTi SED 2610 152 ACTi TCM 4301 327 ACTi TCM 5311 334 Adam 6050 129 Adam 6060 108 Adam 6066 108 AgileMesh 100 145 American Dynamics VideoEdge Dome 157 American Dynamics VideoEdge IP Box Camera 157 APPRO LC 7224 series 156 APPRO LC 7226 series 157 Apro Technology H1000 series 255 Arecont AV1300 140 Arecont AV1305 140 Arecont AV1355 140 Arecont AV2100 140 Arecont AV2105 140 Arecont AV2155 140 Arecont AV3100 140 Arecont AV3105 140 Arecont AV3130 140 Arecont AV3155 140 Arecont AV5100 140 Arecont AV5105 140 Arecont AV5155 140 Arecont AV8180 154 Arecont AV8185 154 Arecont AV8360 154 Arecont AV8365 154 AXIS 200 1 AXIS 205 15 AXIS 206 19 AXIS 206M 19 AXIS 206W 19 AXIS 207 18 AXIS 207MW 18 AXIS 207W 18 AXIS 209FD 168 AXIS 209MFD 168 AXIS 210 18 AXIS 210A 18 AXIS 211 18 AXIS 211A 18 AXIS 211M 18 AXIS 211W 18 AXIS 212 PTZ 138 AXIS 213 PTZ 22 AXIS 214 PTZ 123 AXIS 215 PTZ 123 AXIS 215 PTZ E 123 AXIS 216FD 122 AXIS 216MFD 122 AXIS 221 25 AXIS 223M 153 AXIS 225FD 25 AXIS 231D 23 AXIS 231D 23 AXIS 232D 23 AXIS 232D 23 AXIS 233D 23 AXIS 240 2 AXIS 240Q 16 AXIS 241Q 16 AXIS 241QA 16 AXIS 241S 17 AXIS 241SA 17 AXIS 242S IV 17 AXIS 243Q 160 AXIS 243SA 17
92. 44 JVC VN C20U 126 JVC VN C30U 42 JVC VN C3WU 40 JVC VN C205 169 JVC VN C215 146 JVC VN C625U 45 JVC VN C655U 45 JVC VN E4 E4E E4U 121 JVC VN V25 185 JVC VN V26 185 JVC VN V225 185 JVC VN V685 196 JVC VN V686 V686B 196 JVC VN V686WPC 196 JVC VN X35 235 JVC VN X235 235 Lenel ICT 220 345 Lenel ICT 230 345 N N N N N N On Net Surveillance Systems Inc Lenel ICT 250 346 Lenel ICT 510 345 Lenel LC 330FDX 345 Linudix LWS800 511 Linudix LWS820 512 Linudix LWS840 511 Lumenera LE165 84 Lumenera LE175 84 Lumenera LE256 84 Lumenera LE259 84 Lumenera LE275 84 Lumenera LE375 84 Lumenera LE575 84 Mobotix D10 86 Mobotix D12 86 Mobotix D22M 86 Mobotix M1 86 Mobotix M10 86 Mobotix M12 86 Mobotix M22M 86 Mobotix Q22 260 Mobotix Q24 328 Optelecom Siqura BC 2x series 281 Optelecom Siqura C 50 269 Optelecom Siqura C 54 289 Optelecom Siqura C 60 321 Optelecom Siqura FD 2x series 281 Optelecom Siqura S 50 269 Optelecom Siqura S 54 289 Optelecom Siqura S 60 321 Optelecom Siqura V 30 295 Panasonic BB HCE481 series 24 Panasonic BB HCM311 series 24 Panasonic BB HCM331 series 24 Panasonic BB HCM371A 24 Panasonic BB HCM381 series 24 Panasonic BB HCM403 24 Panasonic BB HCM511 180 Panasonic BB HCM515 180 Panasonic BB HCM527 180 Panasonic BB HCM531 180 Panasonic BB HCM547 180 Panasonic BB HCM580 180 Panasonic BB HCM581 180 Panasonic BB HCS301 24 Panasonic BL C1 series 24 Panasonic B
93. Any prerequisites for adding users from a local database The users must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing Recommended check box is cleared When ready click OK and close the window What is Active Directory Active Directory is a distributed directory service included with several Windows Server operating systems users are specified centrally in Active Directory In short the benefits of importing user data from Active Directory are that administrators do not have to create separate user accounts for accessing the surveillance system because user authentication will be handled centrally by Active Directory and that users can use their Windows login when accessing the surveillance system no need to memorize separate user names and passwords Any prerequisites for adding users from Active Directory verifies client users identities using NTLM challenge handshake with a Microsoft Domain Controller In order to be able to import users and groups through Active Directory a server with Active Directory installed and acting as domain controller must be available on your network Consult your network admi
94. C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 Inthe calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 wn e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot spec
95. Cental Dispi 1 Motion on Back Dox West Winal Camera b Delete Motion on Back Door West Wing Camera b Connect Oecornect then connect Diecornect On Net Surveillance Systems Inc 133 RC C User Manual Configuration e Delete selected event Deletes selected event on selected device e Connect Connects to the camera actual camera is specified after selecting action to be taken e Disconnect then connect Disconnect any existing connections then connect again With this option the live video will appear in the NetMatrix recipient on a first in first out basis Each time a new event occurs video from the latest event is displayed prominently in a specific position on the NetMatrix recipient while at the same time video from the older events is shifted to less prominent positions and eventually pushed out of the NetMatrix recipient in order to make space for the latest event s video With the Connect option you may thus experience that if video triggered by one event on a camera is already shown on the NetMatrix recipient videos triggered by another event on the same camera will not be displayed prominently as coming from the latest event simply because the NetMatrix recipient is already showing video from the camera in a less prominent position By selecting Disconnect then connect you can avoid this issue and ensure that video from the latest event is always displayed prominently e Disconnect Disconnects any existing conn
96. Client Lite Denying users the right to create their own views may make sense in some cases for example in order to limit bandwidth use For more information about shared and private views see the separate Ocularis Client User Manual documentation Generic Event e Event name Specify a name for the event Generic event names must be unique and must not contain the following characters lt gt amp e Event port Read only field displaying the port number on which the NVR listens for generic events default is port 1234 The port number can be changed as part of the general event handling configuration e Event substring Lets you specify the individual items for which the NVR should look out for when analyzing data packages Specify one or more terms then click the Add button to add the specified term s to the Event message expression field the content of which will be used for the actual analysis Examples Oo Single term User001 when added to the Event message expression field the term will appear as User001 Oo Several terms as one item User001 Door053 Sunday when added to the Event message expression field the terms will appear as User001 Door053 Sunday When you add several terms as one item appearing as for example User001 Door053 Sunday in the Event message expression field everything between the quotation marks must appear together in the package in the specified sequence in order to match yo
97. Configuration button in the Management Application s toolbar or select File gt Save from the menu Your configuration changes will then take effect the next time RC C s services are restarted e If you want your configuration changes to have immediate effect the NVR s services must be restarted Click the Save Changes and Restart Surveillance Services button in the Management Application s toolbar or select File gt Save Changes and Restart Services from the menu IMPORTANT While services are restarted it will not be possible to view or record video Restarting the services typically only takes some seconds but in order to minimize disruption you may want to restart services at a time when you do not expect important incidents Users connected to the NVR with Ocularis Client will typically remain logged in during the services restart but they will experience a short video outage Archiving Extends Recording Storage Archiving is an integrated and automated feature that helps you store recordings beyond the capabilities of NVR s standard database Archiving maximizes storage capacity and minimizes risk you can keep recordings for as long as required limited only by the available hardware storage capacity Have you used archiving in other NVRs In that case note that RC C automatically archives recordings if a camera s database becomes full Also note that retention time is likely to affect when archiving will take place Retention time is
98. EA TEA cat yazan saesesadesqapatseesunchossphays huvepiapveivateasakecvuceasshucpeaesas Client Access to Surveillance System Configure Server ACCESS 0 Properties Sener Access ainia a eae ele i AR Re neni Local IP RANGCS i cactctccvscveterenctendevecsecasendeetcensenees ceatenveateckcewesnedutcuvieneascesiechoubitesdeyea teu cavienvdaa dust Yin ia i iii aS Language Support amp XML Encoding Configure E mail Notifications Configure SMS Mobile Text Notifications cccceccecccceeeeeneeeeeeeeeeeeeeeeeeeeceeeceaeecaeeeeeesaeeseeeeenaeesaeseeeeseeseaeeeeeeseeesieeeeae Properties E mail Notifications SMS Notifications eee eeeeeeeeeees Events nput amp Out pout rine cies ec csce cai edhbeseectec ccc deed enecedibdeecene enaeugatenesduadtuneceveecesuaseauedestene Overview of Events Input amp Output oo eee eeeeseeceeseeeeceeeeseeeeeseceesaeeseeeaecaessaecsesaecaecsaesaeeseseaesaesaeseaesaesseeeaesaeeeaseaeeeeeaees Configure General Event Handling Add a Hardware Input Event Add a ManualiEvents 20 3 accnie e ae aia ee seated A eine Wien ae ds eel Adda Generic Evente aa a a oe aRI nia TA aE neces eeet Test a Generic Event Add a Timer Event sa ee Add a Hardware Outputiits c iccie cts adec stench ie cele itvelea Sioa A a hgh Salas tvelstsn sate e eaa aa A a aE aa Configure Hardware Output on Event General Event Properties POPES amp Poling scis case i
99. EC IP2VD 225 GE Security GEC IP2VD C 225 GE Security GEC IP2VD P 225 GE Security GEC IP2VD DN 225 GE Security GEC IP2VD DNC 225 GE Security GEC IP2VD DNP 225 Grandeye Halocam IPC 249 Grandeye Halocam IPW 249 HikVision DS6101 277 HikVision DS6104 273 Hitron HECMC4V4C4 217 Hitron HEV0104 223 Hitron HEV0407 224 102 RC C User Manual Hitron HNCA 811 NZ1 222 Hitron HNCB 811NZ1 219 Hitron HNCB F1SN 218 Hitron HNCG F1SAW0S4 220 Hitron HNCV 811PZ0S4 221 Hitron HWD 12SMP 187 Hunt HLC 811 201 Hunt HLC 81M 201 Hunt HLC 83M 202 Hunt HLC 83V 203 Hunt HLT 86F 198 Hunt HLT 87Z 209 Hunt HLV 1Cl 200 Hunt HLV 1CM 200 Hunt HVT 01HT 199 Hunt HWS 01HD 204 Hunt HWS 04HD W 205 ICanServer 510 257 ICanServer 512 257 ICanServer 540 259 ICanView 220 258 ICanView 222 258 ICanView 230 258 ICanView 232 258 ICanView 240 257 ICanView 250 257 ICanView 260 258 ICanView 270 257 ICanView 280 258 ICanView 290 257 Infinova V1700N C series NetDome 119 Infinova V1700N L series NetDome 137 Intellinet MNC L10 550710 104 ioibox series 400 ioibox series 401 ioicam series 400 IPIX 1S2000 CVD2000 CVN2000 57 IPIX CVD3000 57 Ipx DDK 1000 157 Ipx DDK 1500 157 Ipx DDK 1500D 157 Ipx VE 3500 157 IQEye101 83 IQEye300 series 83 IQEye 4 series 83 IQEye501 83 IQEye510 83 IQEye 511 83 IQEye600 series 83 IQEye700 series 83 IQEye800 Sentinel series 83 IQEye Alliance series 83 Johnson Controls DVN5008 293 JVC VN A1U 43 JVC VN C10U
100. Format With MPEG you can define frame rate as well as when to record keyframes or all frames e Frame rate per second Frame rate for viewing live and recorded video from the camera Select number of frames per second e Record keyframes only Keyframes stored at specified intervals record the entire view of the camera whereas the following frames record only pixels that change this helps greatly reduce the size of MPEG files Select the check box if you only want to record keyframes Note that you can specify exceptions if motion is detected or events occur see the following e Record all frames on motion Allows you to make exceptions if you have selected record keyframes only Select this check box to record all frames when motion is detected Two seconds after the last motion is detected the camera will return to recording keyframes only e Record all frames on event Allows you to make exceptions if you have selected record keyframes only Select this check box to record all frames when an event occurs and until another event occurs Use of this feature requires that events have been defined and that you select start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event The camera will begin recording all fames when the start event occurs e Stop event Selec
101. If you want to use groups make sure you add groups before you add users You cannot add existing users to groups Finally the 8 administrator is also listed under Users If required this lets you configure password protection for the Management Application Note if using RC C with Ocularis only one user is required This user may be a basic or Windows user and should have full administrative rights to all functions and cameras within the NVR Remaining users will be configured in Ocularis Base Replace Hardware Devices If required you can replace a hardware device which you have previously added to and configured on your surveillance system uwith a new one This can typically be relevant if you replace a physical camera on your network The Replace Hardware Device wizard helps you through the entire replacement process on the surveillance system server including On Net Surveillance Systems Inc 195 RC C User Manual Configuration e Detecting the new hardware device e Specifying license for the new hardware device e Deciding what to do with existing recordings from the old hardware device You access the Replace Hardware Device wizard from the Management Application s navigation pane Expand Advanced Configuration expand Hardware Devices right click the hardware device you want to replace and select Replace Hardware Device You can access also the wizard when dealing with a hardware device s Network Device Type amp Lice
102. K 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Video amp Recording Once you have added hardware devices and attached cameras you can configure video and recording settings in three ways e Wizard driven Guided configuration which lets you specify video recording and archiving settings for all your cameras See Configure Video amp Recording Wizard and Adjust Motion Detection Wizard e General Lets you specify video recording and shared settings such as dynamic archiving paths and whether audio should be recorded or not for all your cameras 1 In the Management Application s navigation pane expand Advanced Configuration right click Cameras and Storage Information and select Properties 2 Specify properties as required for Recording amp Archiving Paths Dynamic Path Selection Video Recording Frame Rate MJPEG Frame Rate MPEG Audio Selection and Audio Recording When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar e Camera specific Lets you specify video recording and camera specific settings such as event notification PTZ preset positions etc for each individual camera 1 In the Management Application s navigation pane expand Advanced Configuration and expand Cameras and Storage Information 2 Right click the required camera and s
103. L C10 series 24 Panasonic BL C20 series 24 Panasonic BL C30 series 24 Panasonic BL C111 182 Panasonic BL C131 182 Panasonic KX HCM8 63 Panasonic KX HCM10 series 63 Panasonic KX HCM110A series 24 Panasonic KX HCM230 series 63 Panasonic KX HCM250 series 63 Panasonic KX HCM270 series 63 Panasonic KX HCM280 series except 280A 63 Panasonic KX HCM280A 24 Panasonic WJ NT104 60 Panasonic WJ NT304 183 Panasonic WV NF284 120 Panasonic WV NF302 211 Panasonic WV NP240 WV NP244 120 Panasonic WV NP304 211 Panasonic WV NP472 61 Panasonic WV NP502 351 Panasonic WV NP1000 WV NP1004 120 Panasonic WV NS202 143 Panasonic WV NS320 series 64 Panasonic WV NS950 197 Panasonic WV NS954 197 Drivers Panasonic WV NW470 85 Panasonic WV NW484 175 Panasonic WV NW502 351 Panasonic WV NW960 197 Panasonic WV NW964 197 Pentax Versacam IC 4 50 Pelco Camclosure IP series 149 Pelco Endura Net5301T 144 Pelco Endura Net5308T 166 Pelco Endura Net5316T 167 Pelco IP3701 176 Pelco NET300 208 Pelco NET350 208 Pelco Spectra IV IP 213 Pelco SpectraMini IV IP 213 Philips NETSVR 1 93 Philips NETSVR 6 92 Pixord 120 72 Pixord 126 75 Pixord 200 73 Pixord 201 73 Pixord 205 77 Pixord 207 77 Pixord 24X 74 Pixord 261 78 Pixord 1000 75 Pixord 400 400W 151 Pixord 461 148 Pixord 463 148 Pixord 1401 1401W 136 Pixord 2000 76 Pixord 4000 151 Polar Industries zPan100 501 Provideo SD 606W 279 Provideo SD 705VPRO 1 280 Samsung SCC C6475 131 S
104. Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Live Frame Recording Rat Frame Rate w 10 00 Second v Example Only the selected value is applied using this method Time Unit e Set all template values on selected cameras Lets you apply all values from the template to selected cameras e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp On Net Surveillance Systems Inc 121 RC C User Manual Configuration e Regular Frame Rate Properties e Live frame rate Required average frame rate for live video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column e Recording frame rate Required average frame rate for recorded video from the camera
105. MDD log for example is_audit20101231 log The _is prefix is due to the fact that the audit log files are generated by the Image Server service e Log Locations By default all log files are placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista In XP or 2003 Server the directory is C Documents and Settings All Users Application Data OnSSI Recorders RC C They are stored for seven days by default Note however that log file locations as well as the number of days to store the logs can be changed as part of the logging configuration e Log Structures Most log files generated by the NVR use a shared structure complying with the W3C Extended Log File Format Each log file consists of a header and a number of log lines e The header outlines the information contained in the log lines e The log lines consist of two main parts the log information itself as well as an encrypted part The encrypted part makes it possible through decryption and comparison to assert that a log file has not been tampered with e Log Integrity Checks All log files except Management Application log files are subjected to an integrity check once every 24 hours The integrity check is performed by RC C s Log Check service On Net Surveillance Systems Inc 67 RC C User Manual Logging The result of the integrity check is automatically written to a file named
106. OnSSI RC C Note On Windows 2003 Server the location is C Documents and Settings All Users Application Data OnSSI Note ly Open Management Application These directories may be hidden from view If you cannot see the folder be sure to modify folder options to display hidden files and folders 4 Delete the contents of the folder On Net Surveillance Systems Inc RC C User Manual Installation C ProgramData OnSSI RC C Do NOT delete the folder 5 Open a command prompt a Click Windows Start menu b Type cmd in the Search box 6 Change directories to c Program Files Onssi NetDVMS 7 Run the Configuration Upgrader executable TWICE using the folder from Step 3 as the destination parameter Type into the command window Configurationupgrader exe c ProgramData OnSSI RC C Press ENTER Configurationupgrader exe c ProgramData OnSSI RC C Press ENTER This should copy the necessary NetDVMS configuration files as well as create a configuration xml to the C ProgramData OnSSI RC C directory Note It may take a few moments for the configuration xml file to appear 8 Close the command window 9 Open the Management Application to verify the import of the configuration Tip Once the configuration has been converted your entire configuration will be contained in a single file When you later want to back up your configuration you can simply make a copy of the file configuration xml typically lo
107. Regular Frame Rate Properties e Live frame rate Required average frame rate for live video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base On Net Surveillance Systems Inc 27 RC C User Manual General Recording amp Storage Properties column e Recording frame rate Required average frame rate for recorded video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column e Frame Rate Time Base Select required unit for live and recording frame rates per second minute or hour e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Speedup Frame Rate Properties e Enable Speedup The speedup feature lets you use a higher than normal frame rate if motion is detected and or an event occurs When you enable speedup further columns for specifying speedup details become available e Live Frame Rate Required average speedup frame rate for viewing live video from the camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column The frame rate must be higher than the live frame rate specified under normal mode e Recording frame rate Required average speedup frame rate for viewing recorded video from th
108. S 3220 3220G 118 D Link DCS 5300 99 D Link DCS 5300G 99 Drivers D Link DCS 6620 6620G 116 Darim Vision PVE400 298 Digimerge DNB6320 177 Digimerge DND7220 177 Digimerge DNP5220E 177 Digimerge DNP5320E 177 Digimerge DNS1010 177 Digimerge DNZ 9320W 244 DirectShow camera 214 Discrete DIV2300 188 DvTel DVT 7101 262 DvTel DVT 7608 261 DvTel DVT 9460 514 DvTel DVT 9540DW 514 Dynacolor Diva Standard 296 Dynacolor Diva Zoom 282 Dynacolor Diva Mini 297 Etrovision EV3130 236 Etrovision EV3131 237 Etrovision EV3131A 237 Etrovision EV3830 238 Etrovision EV6130 239 Etrovision EV6230 240 Etrovision EV6530 240 Extreme CCTV EX7 103 Extreme CCTV EX30 103 Extreme CCTV EX36 103 Extreme CCTV EX80 103 Extreme CCTV EX82 103 Extreme CCTV EX85 140 Extreme CCTV REG L1 IP 103 Eyeview CMI 110 245 Eyeview CMI H230 245 Eyeview CMI H260 245 Eyeview EYENET 250A 245 Eyeview GPOWER IP Basement 245 Eyeview IPM 100 245 Eyeview IPM 150 245 Eyeview IPM 300 245 Eyeview IPM 500 245 Eyeview IPR 220 245 Eyeview IPR 330 245 Eyeview IPR 6000 245 Eyeview IPR 6600 245 Eyeview IPS 110 245 Eyeview IPS 220 245 Eyeview IPS 300 245 Eyeview IPS 330 245 Eyeview IPS 400 245 Eyeview IPS 500 245 Eyeview IPS 600 245 Eyeview IPS 800 245 Eyeview IPS 830 245 Eyeview IPS 900 245 FLIR 241S 95 GE Security GEC IP2B 225 GE Security GEC IP2B C 225 GE Security GEC IP2B P 225 GE Security GEC IP2D 225 GE Security GEC IP2D C 225 GE Security GEC IP2D P 225 GE Security G
109. Selection six ission tected sina tdas eea aeei e ene a ha Sean gened Viderat dardaiado aa A e anade atdan 24 Video Recordings yay aies neiaa anaana EA ces assiasachavesesoGeaaetticsnaieesacapiinetisctda lan acaund a EEn atesud eubinnhatesisapsaucava cout ccages AALTER UA 25 Manual Recording siae i aiaa a a a a Ea a aa ee ea eae ee tad e A ieee i ena ated 27 Frame Rate MIPE Gwinnett aeaee A r EON N Ar ASE e aa Na eee 27 Frame Rate MPEG rniii a Ea daS aa e aeii ea aaa V Ea aa ATi 28 AUdio SelectiO Nyi ayrisinin naa danane ia an ee endend iasta Aa adai epa i aapea en aadatan 30 PAUCIOSFRE COMING PETET EAT TTT AA TAE ATE 30 St r ge Informations seere aena a e a ea e i All cides e E A AEA T 31 Camera Specific Properties ceccecessensecseesseesneseesseeseenenseeeseeeenseeeseeeseaneesseeeenseeeseenaneeees 32 GCaMelaivssiide E ik iki e hush eis a haa Ble Sheets Rai te see ed iva de ay 32 On Net Surveillance Systems Inc iii RC C User Manual Table of Contents Recording Settings Recording amp Archiving Paths Event Notification Motion Detection amp Exclude Regions PTZ Preset Positions ee PTZ Patrolling PTZ on Event NetCenttral ccccccccecceeeeeeeeteeeteeees Configure NetCentral Connections cse ccse dni pecs stadavenciive cadens ehemesaiieibebeil aden nedba dadean daada tiee Properties NetGenittal scr aast na aai es cite oe dear cade vacate EE EEEa U
110. Surveillance Systems Inc 74 RC C User Manual NetMatrix Properties NetMatrix Recipients The NetMatrix Recipients tab is used for enabling NetMatrix functionality and for defining on which computers to display NetMatrix triggered live video A computer on which NetMatrix triggered video can be displayed is known as a NetMatrix recipient Being able to view NetMatrix triggered video requires that either an Ocularis Client or the dedicated NetMatrix Monitor software is installed on the user s computer e Enable matrix Select check box to enable NetMatrix functionality e List of Defined NetMatrix recipients Lists any already defined NetMatrix recipients that is computers on which NetMatrix triggered video can be displayed To change the properties of an already defined NetMatrix recipient select the required NetMatrix recipient make the changes in the fields below the list then click the Update button To remove a NetMatrix recipient from the list select the unwanted NetMatrix recipient then click the Delete button e Delete Available only when you have selected a NetMatrix recipient in the list Clicking the Delete button will remove the selected NetMatrix recipient You will be prompted to confirm the removal e Name Name for the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one The name will appear in various day to day usage situations it is therefore a good idea to
111. When remote users connect to the master server they will instantly get access to the slave servers as well This feature is not necessary when using Ocularis However Ocularis will support a master slave setup in a legacy environment e Configuring a Master Slave Setup 1 In the Management Application s Navigation pane expand Advanced Configuration right click Master Slave and select Properties 2 Select the Enable as master server check box 3 Click Add to add a slave server 4 Specify slave server properties When ready click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar e Adding a Slave Server To add a slave server expand Advanced Configuration in the Management Application right click Master Slave and select Add New Slave Server then specify slave server properties Slave servers can also be added from the Master Slave Properties window by clicking Add Tip Instead of specifying a host name when adding a slave server you may specify the IP address of the slave server Simply type the IP address in the Address field when adding the slave server Remember that if on a local network the oca IP address of the slave server must be used Before you start using your master slave setup remember to verify that e Required users have be defined on the master server as well as on each of the slave servers e Public Access has been enabled on all involved
112. You configure output for manual activation in clients as well as for automatic activation on detected motion individually for each camera Configure Hardware Output on Event Once you have added hardware output such as lights sirens door openers etc you can associate the hardware output with events This way particular hardware output can be activated automatically when events occur Example When a door is opened hardware input event lights are switched on hardware output When making the associations you can select between all output and events defined on the NVR you are not limited to selecting output or events defined on particular hardware devices 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Output Control on Event and select Properties 2 Inthe Event column select the required event 3 Inthe Output column select the hardware output you want to be activated by the event 4 Click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar You can use a single event for activating more than one output You cannot delete associations but you can change your selections or select None in both columns as required Tip If you have not yet defined any suitable event or output you can quickly do it Use the Configure events list and or Configure Output button located below the lis
113. a ied To BACK ODE iiciin nanea aaa 3 To Restore Your Backed up Configuration s ssssssssssssrssrrsrrsrrsrrsnrnnrntuutrutrttitntunnunnuntuninturnnnnnunnunna 111 Removal a eA E A A AT EE 112 Entire Systemin Gana a a a a a aaea aa aara aae a Ea Sa aa aaea Saa Sa a E SA aSa Eaa A EEANN 112 Remove Entire Surveillance System 112 Individual Components 112 Remove Installation Files for End User Features s sssssssssrssssrrrssrrrssrrrnsrrrnsrrrnsrrnnerrnnsrrrnnrrrnns 112 Remove the NVR Download Manager sssssssssssssrsssrrssrrrssrrresrrrtsrrnnsttntsttntsrrnnsrtnnsrtnnerennerennt 112 Remove the Surveillance Server Software ssssssssssssssrrsssrrssrrrtsrrrrsrrrtsrrntsrtnnsrrnnertnnstennertnnnt 112 Remove Video Device DFIVERS oireann ena e a ED yaya EPa EEU SNA ES EDV RE DEE TSE EE pu EVERS 113 E TE ni e E E T E SEEE TE E EE A E EA 114 C nfigurati N e aiaa dade aada te eiiiai aa aeaiia a cede e a aaaeaii e aaae da iaiaaeaia 115 Archiving UCI PEIA e EE A SEAT EEE T EEE ANOIA Audio Recording Audio Selection Camera 0 GAME A ACCESS sere fodest shececed Se eceshh nas0h beh ti as igo a Ca etades ece koe es eS LIo da heres ted dt Dea aed Roe ay Dynamic Path Selection oo ceceeceeceeseeneeeeeeeeeeeeeeeceeeeseeaeeeeeaeeeaesaeeeeecaesaeseaesaeeeaesaeeeesaeeeesaesaeseeesaeseeseeesaeeeeseaeeeeeaeeaeseaee 118 E mail Notifications we 119 E Mail Notification 120 Event Notification 12
114. a k a COM port on the RC C server Siemens TC 35 is a dual band EGSM900 GSM1800 modem verify that the modem is compatible with mobile phone networks where you are going to use it with RC C To configure SMS notifications do the following 1 In the Management Application s Navigation pane expand Advanced Configuration right click SMS and select Properties 2 Enable the use of SMS by selecting the Enable SMS check box On Net Surveillance Systems Inc 45 RC C User Manual Camera Specific Properties 3 4 Specify required properties Tip You can test your SMS notification configuration by clicking the Test button this will send a test SMS to the specified recipient Note that you must stop the Recording Server service while you perform the test remember to start the service again afterwards When ready click OK Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When configuring SMS alerts also consider the SMS notification schedules configured for each camera Properties E mail Notifications Enable e Mail Recording Server Enables e mail notifications whenever the Recording Server service is running E mail notifications will then be sent when the following conditions apply o the Recording Server service is running o motion is detected or an event for which the sending of an e mail alert has been defined occurs motion is detected within a
115. a particular camera only available when the camera is selected You can use manual events for a wide variety of purposes for example e As start and stop events for use when scheduling cameras online periods For example you can make a camera start or stop transferring video to the surveillance system based on a manual event On Net Surveillance Systems Inc 49 RC C User Manual Events Input amp Output e As start and stop events for controlling other camera settings For example you can make a camera use a higher frame rate based on a manual event or you can use a manual event for triggering PTZ on event e For triggering output Particular output can be associated with manual events e For triggering event based e mail and or SMS notifications e In combinations For example a manual event could make a camera start transferring video to the surveillance system while an output is triggered and an e mail notification is sent to relevant people To add a manual event do the following 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Manual Events and select Add New Manual Event 2 Inthe list in the left side of the Manual Event Properties select global or a camera as required 3 Click the add button and specify required properties When ready click OK or click the Add button again to add a timer event to the event you have just created 4 Save you
116. aa aa a AAAA a aA aariaa oadet iraia 1 Several Targeted Components IN Onei sesteisseds seii nei nc dv advil ne de babel tede aa DR DE EA EO S A E Daia ae EE SE Dari ness NE 1 SORTS eae rae fara E E AT E E E E E E A E E FSM SG SNe Tag ES E EE O Tense a acs 1 Minimum System Requirements af 1 Administrator Rights seenen sarera ava N eae pania eaa Ae ari a Ia Aaea TAE ipia tda asrda Taaa 3 Important Port NUMDOIS i ciicccccccecessevsertseeceesencuteasecveceewsteredoseasisedcesoussenscstdcecencesedseursedieesedustecderseavandsdeseraatseatvavdivesesacsessa 3 Virus Scanning Information 3 Time Server Recommended 4 Vit ea Ati Oi eaa feisc eed seep nn cea E duets die vida sctdetca and E E E tiaee 5 Installation steed UpOrade cceeccssccsscrscssesesesseessoees SO Upgrade from a Previous Version nied Getting Started 9 FOALUICS wcsiisecavitcesthaasliecscchseedentusees ste Get Your System Up and Running ate eres Access the Management Application sad Use the Built in Help System ee eeeeceseeeceeneeeeceeseeeeeeseeeeeeereeeeeaees dubia cuviees caer OAA TAN 11 Navigating the Built in Help S s teM oaiae E EEE E 11 Printing EID LOPICS e rae AN E EEEE EIE OA EDETEN SESE A VORTE DE EE E o EE rene CE DES 11 Ma d Si er eaaa ae ea a aet eaae ude aaee aa aa aa eect aaa aa e maaa aa rs dA eara Naia daaa Saaai aaan aaa aiaa aaua 12 Overview Of WizardS cee eececeeseeeeeeeeeeeeaeeaeeeeeeaecneeaeeaaeeaeese
117. aaa arai Aaa iae da aa aea ae EEan aaea aiaia Eaei Jan 99 Overview of Users and Groups c ccccccceseceseceeseceseeeseeeeeeeceaeceaeeceeecaeeeaeeecaeecaeeseaeeceeeseaeseaeeseaeseaeseaeeeaeeseaeeeeeeseeeseeeeeaeees 95 Configure User Access WIZard eve isai ena aaie aae tease aaen Sen deiae ea tev eavedvens aidr iae niae ideta 95 Add BASIC USCIS esera eTe T A anaana Aaaa Aa AA a aa aa Aaa A En ADRA Aena ASE ELELE Aa ised aupiralacesisapauisesschul AAAA T Sed 95 Add Windows USCIS snai manan aeaea ae Eae a A aeaa aa AE aaa ANE A raaa ara ar a ea EEEE a aar iNT 96 Add User GroUpSrn iona e aa e aeaa a aaa A a aTa DAE a A te wile ENSE EL eas 98 Configure User and Group Rights cccccccceececeeeeseeeceececeaeeeaeeeeaeeeaeeceaeseaeecaaeeeaeesaeeeaeeseaeseaeeceeeaeeseseeseaeseaeeeeeeseeeseeeeee 98 Use rnformation crn irisi aadar sie taba bee Manned einai andaa silane ata lav aa titel ee e ieia 98 GFOUP INMPOLIM ALON s een steak ieee hus rie aa ai A dees obvi A A eaten ase ge dead ae nese EATA SE EE se AS ees 98 General ACCESS iaire E A eara e A EEE a a Ea A Ea e AEE a Aa E aaea araa aa R aa aeaa iE 99 Camera Access PEATA TEATE 99 Drivers ianaeaieo iaai aaa aa daaa PAEPAE ETAO 101 Update Video Device Driva Sissis enera a erdie area aen k iaaa ari daa daat n iiiar 101 Hardware Driver DISSE 101 Clients amp Ancillary Applications 0 ccccccceceeceeeeeeeeeseeeeeeeeeeeseeesaeeeeeeeseseeeseeeenenenes 105 Ocularis Client eaan n etececi
118. according to the structure LogCheck_YYYYMMDD log for example LogCheck_20101231 log Like the log files themselves the log check files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista Any inconsistencies will be reported in the form of error messages written in the log check file Possible error messages other non error messages may also appear in the log check file e Log integrity information was not found Log integrity can t be guaranteed The log file could not be checked for integrity e Log information does not match integrity information Log integrity can t be guaranteed The log file exists but does not contain the expected information Thus log integrity cannot be guaranteed e Log file name not found The log file was not present e Log file name is empty The log file was present but empty e Last line changed removed in log file name The last line of the log file did not match validation criteria e Encrypted data missing in log file name near line The encrypted part of the log line in question was not present e Inconsistency found in log file name near line The log line does not match the encrypted part e Inconsistency found in log file name at beginning of log file The log file header is not correct This situation is most likely to occur if a user has attempted to delete the b
119. ad Configuration from Restore Point 2 Inthe left part of the Restore Points dialog select the required restore point Tip When you select a restore point you will in the right part of the dialog see information about the configuration state at the selected point in time This can help you select the best possible restore point 3 Click the Load Restore Point button 4 Ifyou are sure that you want to overwrite the current configuration with the one from the selected restore point click OK 5 Only relevant if the current configuration contains cameras or other devices which were not present in the selected restore point You will be asked whether you want to delete or keep recordings from affected devices If keeping the recordings note that they will not be accessible until you add the affected devices to NVR again Select the required option and click OK 6 Click OK in the Restore Points dialog 7 Inthe Management Application s navigation pane expand Advanced Configuration and select Services 8 For the Recording Server and Image Server services respectively click the Restart button When the two services are restarted the configuration from the selected restore point is applied Specify a New SLC Software License Code If you have upgraded to a new software version or otherwise acquired a new Software License Code SLC do the following to use the new SLC 1 Inthe Management Application s Help menu select About
120. added properties of a new NetMatrix recipient in the Name Address Port Password and possibly Ocularis Client fields NetMatrix Event Control There are two ways in which NetMatrix triggered video can appear in a NetMatrix recipient e Another user wants to share important video and sends it to the required NetMatrix recipient from a Ocularis Client or from a custom made web page see NetMatrix Recipients Properties e Video is sent to the required NetMatrix recipient automatically when a predefined event occurs The NetMatrix Event Control tab is used for configuring the automatic sending of live video based on predefined events it lets you define exactly which events and cameras to use on a per NetMatrix recipient basis The NetMatrix Event Control tab displays the list of NetMatrix recipients defined on the NetMatrix Recipients tab On Net Surveillance Systems Inc 75 RC C User Manual NetMatrix a Cen es eee 5 Moer on ach Doce West Weg Camera b Pp Correct Back Doo West Wing Camera b amp Moston on Back Doce East Wing Camera a Pp Conmect Back Door East Wing Caneta a Moron on Start Camera c Pp Dirconnect then connect Sts Cameta c E tnesdert Roon Onplay amp Motor on Man Oltce Camats 1 be Correct gt Man Dfice Comers 1 Right clicking a NetMatrix recipient brings up a list of devices with belonging events When you select an event it will initially be highlighted by a red ex
121. aling with a PTZ Pan Tilt Zoom camera PTZ preset positions can be used for making the PTZ camera automatically go to a particular position when particular events occur and when setting up PTZ patrolling profiles Preset positions also become selectable in clients allowing users with required rights to move the PTZ camera between preset positions Names of preset positions must contain only the characters A Z a z and the digits 0 9 If you import preset positions from cameras see the following verify that their names do not contain other characters if they do change the preset position names before importing them Restart services after having made changes to PTZ settings Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application e PTZ type Your configuration options depend on the type of PTZ camera in question o Type 1 stored on server You define preset positions by moving the camera using the controls in the upper half of the window then storing each required position on the NVR server You can define up to On Net Surveillance Systems Inc 141 RC C User Manual Configuration 2550 preset positions this way Type 2 imported from
122. all so it maps the port On Net Surveillance Systems Inc 164 RC C User Manual Configuration and IP addresses used by the new hardware device e User name User name for the hardware device s administrator account Many organizations use the hardware device manufacturer s default user names for their hardware devices If that is the case in your organization select lt default gt do not type a manufacturer s default user name as this can be a source of error trust that will know the manufacturer s default user name Other typical user names such as admin or root are also selectable from the list If requiring a user name which is not on the list simply type the required user name Tip User names you type yourself will subsequently be added to the list so you can easily select them later e Password Password required to access the new hardware device s administrator account Tip If in doubt about which user name password to use ask yourself Have you previously used a web page to connect to the hardware device and view video While you did this were you also able to configure camera settings such as resolution etc If you can answer yes to both questions you were in all likelihood using the hardware device s administrator account in which case you will also know the user name password Then specify which device driver to use for the new hardware device You can do this in two ways e By selecting the required video device d
123. ame Type the account name used for the connection between the RC C NVR and NetCentral servers The name must match the name specified on the NetCentral server itself Default name is Name e Password Type the password used for the connection between the RC C and NetCentral servers The password must match the password specified on the NetCentral server itself Default password is Pass e Port Type the port number to which the NetCentral server should connect when accessing the RC C server The port number must match the port number specified on the NetCentral server itself Default port is 1237 Client Access to Surveillance System Configure Server Access You can configure clients access the NVR server in two ways e Wizard driven Guided configuration which lets you quickly specify how clients access the server as well as which users should be able to use clients See Configure User Access Wizard When using the wizard all users you add will have access to all cameras including any new cameras added at a later stage If this is not acceptable specify access settings users and user rights separately see the following e Through advanced configuration Technically this is the Image Server service which handles clients access to the surveillance system 1 In the Management Application s navigation pane expand Advanced Configuration right click Server Access and select Properties 2 Specify required properties for Server
124. ame of the SMTP Simple Mail Transfer Protocol server which will be used for sending the e mail notifications Compared with other mail transfer methods SMTP has the advantage that you will avoid automatically triggered warnings from your e mail client Such warnings may otherwise inform you that your e mail client is trying to automatically send e mail messages on your behalf TLS Transport Layer Security and it s predecessor SSL Secure Socket Layer is not supported if the sender belongs on a server that requires TLS or SSL e mail notifications will not work properly Also you may be required to disable any e mail scanners that could prevent the application sending the e mail notifications Server requires login Select check box if a user name and password is required to use the SMTP server On Net Surveillance Systems Inc 119 RC C User Manual Configuration Username Only required when Server requires login is selected Specify the user name required for using the SMTP server Password Only required when Server requires login is selected Specify the password required for using the SMTP server E Mail Notification When configuring scheduling for specific cameras you can specify e mail notification periods Before you can define this type of schedule e mail notification must be enabled You specify a camera s e mail notification periods by creating schedule profiles based on Periods of time example Mondays from 08 30 unt
125. ameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionSensitivity optional number A value between 0 256 corresponds to using the Sensitivity slider when configuring motion detection settings in the Management Application If specified as for example MotionSensitivity1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectionThreshold optional number A value between 0 10000 corresponds to using the Motion slider when configuring motion detection settings in the Management Application If specified as for example MotionDetectionThreshold1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectioninterval optional number Lets you specify how often motion detection analysis should be carried out on video from the camera Specified in milliseconds The interval is applied regardless of the camera s frame rate settings If specified as for example MotionDetectionInterval1 information relates to a specific camera otherwise to all cameras attached to the hardware device Most system integrators store hardware device information in spreadsheets like Microsoft Excel from which they can save the information as comma separated values in a CSV file These examples show hardware information in Excel 1 and when exported to a CSV file 2 note the header lines A
126. amp Output Specific Properties Event amp Output Specific Properties Hardware Input Event When adding hardware input events some properties depend on the selected type of input Enable Select check box to use selected type of input as an event in the NVR and specify further properties Event name Specify a name for the event Hardware input event names must be unique and must not contain the following characters lt gt amp 2 Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details Images from camera Only relevant if using pre and post alarm images a feature available for selected cameras only it enables sending of images from immediately before an event took place from the camera to the surveillance system via e mail Pre and post alarm images should not be confused with the NVR s own pre and post recording feature Lets you select which camera you want to receive pre and or post alarm images from Number of pre alarm images Only relevant if using pre alarm images a feature available for selected cameras only Specify required number of pre alarm images Allowed number may differ from camera to camera allowed range is displayed to the right of the field Frames per second Only relevant if using pre alarm images a feature available for selected cameras only Specify required frame rate Used in combination with t
127. ample server volume directory When the new path is added you can select it for use as a dynamic archiving path Add Lets you add the path specified in the New path field to the list Remove Lets you remove a selected path which has previously been manually added from the list You cannot remove any of the initially listed paths not even when they are selected E mail Notifications Enable e Mail Recording Server Enables e mail notifications whenever the Recording Server service is running E mail notifications will then be sent when the following conditions apply o the Recording Server service is running o motion is detected or an event for which the sending of an e mail alert has been defined occurs o motion is detected within a period of time for which an e mail alert schedule has been defined Recipient s Lets you specify the e mail addresses to which e mail notifications should be sent If specifying more than one e mail address separate the e mail addresses with semicolons example aa aa aa bb bb bb cc cc cc Test Sends a test e mail to the specified recipients If Include Image is selected the test e mail will have a still test JPEG image attached Subject text Specify required subject text for e mail notifications Message text Specify required message text for e mail notifications Note that camera information as well as date and time information is automatically included in e mail notifications In
128. amsung SHR 2040 165 Samsung SNC B2315 227 Samsung SNC B5395 248 Samsung SNC C6225 325 Samsung SNC C7225 325 Samsung SNC C7478 299 Samsung SNC M300 226 Samsung SNT 1010 147 Samsung Techwin SNC550 191 Samsung Techwin SNC570 291 Samsung Techwin SND460V 329 Samsung Techwin SND560 292 Samsung Techwin SNP1000 SNP1000A 195 Samsung Techwin SNP3300 SNP3300A 194 Samsung Techwin SNS100 192 Samsung Techwin SNS400 193 Sanyo VCC 400N 206 Sanyo VCC 9500 206 Sanyo VCC 9500P 206 Sanyo VCC 9600 206 Sanyo VCC 9600P 206 Sanyo VCC 9700 206 Sanyo VCC 9700P 206 Sanyo VCC 9800 206 Sanyo VCC 9800P 206 Sanyo VCC HD4000 206 Sanyo VCC HD4000P 206 Sanyo VCC HDN1 S 206 Sanyo VCC N6584 206 Sanyo VCC N6695P 206 Sanyo VCC WB2000 VCC WB4000 56 Sanyo VCC P450 206 Sanyo VCC P450NA 206 Sanyo VCC P470 206 Sanyo VCC P470NA 206 Sanyo VCC P7574 142 103 RC C User Manual Sanyo VCC P7575P 142 Sanyo VCC P9574 142 Sanyo VCC P9574N 142 Sanyo VCC P9575P 142 Sanyo VCC PN9575P 142 Sanyo VCC PT490 206 Sanyo VCC PT490NA 206 Sanyo VCC PT500 206 Sanyo VCC PT500NA 206 Sanyo VCC XZ200 206 Sanyo VCC XZ200P 206 Sanyo VCC XZ600P 206 Sanyo VCC XZN600P 206 Sanyo VCC ZM600P 206 Sanyo VCC ZMN600P 206 Sanyo VDC DP7584 142 Sanyo VDC DP7585P 142 Sanyo VDC DP9584 142 Sanyo VDC DP9584N 142 Sanyo VDC DP9585 142 Sanyo VDC DPN9585P 142 Sanyo VSP SV2000 56 Siemens CCIC1345 252 Siemens CCIS1345 252 Siemens CCIS1345 DN 252 Siemens CCIW1345 252 Sony SNC CS3 54 S
129. an ates ees adit 150 VIGGO RECOMGING EREET E is cehasacedachavatenefesncttuctuassstoceeuinssisceosctdacata subarssalesudsubsrd sacsuasaeanisesbeahiceaieivatiotvens 151 Wizards 152 INOS aaiae caw lias n aa te E E E ONN 152 Add Hardware Devices Wizard Advanced Method we 152 Add Hardware Devices Wizard Express Method 0 we 152 Add Hardware Devices Wizard Import from CSV File Method w 153 Cameras and Server Are Online ciilin tbl it Niet bid bivcabu del dy clic odbc de dy delie de dude tales 153 Camera and Server Are Ofe deneme aek SRE o alas ilu Medeeedsuedsie vee evpvediyeddedddededeudoevederdcasaeavededoneds 153 Optional Parameters mS Add Hardware Devices Wizard Manual Method 0 0 ee eee cee eeseeeeeeeeeeeeeeeeaeeseaeeseeseaeecseessaeseaeessaeesaeeseeeseeeseneeeges 156 Adjust Motion Detection Wizard ccsccscsscssssceseseesscessseenseeseseecsensonsassteesseesesssceeesessecsdencoeeesoneseeseoesensenseeacetenssesenssonees 156 Configure User Access Wizard 156 Configure Video amp Recording Wizard 156 Replace Hardware Device Wizard w 156 e e isu te cciate vc cae Sela ate vie a delusle velvet 157 Overview of Wizards 165 Add a Generic Event vee 165 Test a Generic Event 166 Add a Hardware Input Event we 167 Adda Hardware Outputs daen ue aaaea akara a aa adaa aaaea saaa shtadan a ea aaa A EN 167 Add a Manual EVent cece cece eee
130. an create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names must not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the top right corner of the dialog select Set camera to start stop on time to base subsequent settings on periods of time or Set camera to start stop on event to base subsequent settings on events within periods of time Tip You can combine the two so you may return to this step in order to toggle between the two options 4 Inthe calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 CO T e f you base your schedule profile or parts of it on events within periods of time remember to select Start event and Stop event from the lists below the calendar section Tip If you have not yet defined any suitable events you can quickly do
131. and Common Properties Template The template can help you configure similar properties quickly For example you have 50 cameras and you want a particular frame rate on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Live Frame Recording Rat Frame Rate A 10 00 li Second v Example Only the selected value is applied using this method Time Unit e Set all template values on selected cameras Lets you apply all values from the template to selected cameras e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp e
132. anning left right the Y axis for tilting up down and the Z axis for zooming in and out to zoom in move the slider towards Tele to zoom out move the slider towards Wide By using the navigation buttons PORK EROS amp amp Be Moves the PTZ camera up and to the left Moves the PTZ camera up Moves the PTZ camera up and to the right Moves the PTZ camera to the left Moves the PTZ camera to its home position that is default position Moves the PTZ camera to the right Moves the PTZ camera down and to the left Moves the PTZ camera down Moves the PTZ camera down and to the right Zooms out one zoom level per click Zooms in one zoom level per click e Import Refresh Only available when you have selected PTZ type 2 or 3 Lets you import already defined preset positions from the camera s memory for use with the NVR If you have already imported preset positions this way and preset positions have since then been added or changed on the camera you can use this button to refresh the imported preset positions e Add New Only available when you have selected PTZ type 1 When you have move the camera to a required position using the controls in the upper half of the window type a name for the position in the blank field then click the button to add the position to the list of defined preset positions Remember that names of preset positions must contain only the characters A Z a z and the digits 0 9 On Net Surve
133. arding required IP ranges discovery methods drivers and device user names and passwords If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Advanced option the wizard is divided into a number of pages e Device Discovery IP Ranges Drivers and Authentication e Detected and Verified Hardware Devices e Missing DLKs if Applicable e Overview and Names Add Hardware Devices Wizard Manual Method The Manual option lets you specify details about each hardware device separately A good choice if you only want to add a few hardware devices and you know their IP addresses required user names and passwords etc If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Manual option the wizard is divided into a number of pages e Hardware Device Information Driver Selection and Verification e Missing DLKs if Applicable e Overview and Names Add Hardware Devices Wizard Import from CSV File Method This option lets you import data about hardware devices and cameras as comma separated values CSV from a file a highly effective method if setting up several similar systems First select whether cameras and the RC C server is online that is having working network connections or offline Then point to the CSV file and click Next On Net Surveillance System
134. are e How Archiving Works For each camera the contents of the camera database will be moved to a default archiving folder called Archives This will happen automatically if a database becomes full and one or more times every day depending on your archiving settings By default the default archiving folder is located on the RC C server in C VideoData In the archiving folder separate subfolders for storing archives for each camera are automatically created These subfolders are named after the MAC address of the hardware device to which the camera is connected Since you can keep archives spanning many days of recordings and since archiving may take place several times per day further subfolders named after the archiving date and time are also automatically created The subfolders will be named according to the following structure Archives CameraMACAddress_VideoEncoderChannel DateAndTime Example With the default archiving folder located under C VideoData video from an archiving taking place at 23 15 on 31st December 2010 for a camera attached to channel 2 on a video encoder hardware device with the MAC address 00408c51e181 would be stored at the following destination C VideoData Archives 00408c51e181_2 2011 12 31 23 15 If the hardware device to which the camera is attached is not a video encoder device with several channels the video encoder channel indication in the sub directory named after the hardware device s MAC addre
135. are device separately A good choice if you only want to add a few hardware devices and you know their IP addresses required user names and passwords etc See Add Hardware Devices Wizard Manual e Import from CSV file Lets you import data about cameras as comma separated values from a file an effective method if setting up several similar systems See Add Hardware Devices Wizard Import from CSV File Add Hardware Devices You add cameras and other hardware devices such as video encoders DVRs etc to your surveillance system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well On Net Surveillance Systems Inc 169 RC C User Manual Configuration You are allowed to use up to 64 cameras per RC C server You are allowed to use up to 64 cameras You are allowed to use up to 25 cameras Note that if required it is possible to add more cameras than you are allowed to use If using video encoder devices on your system keep in mind that many video encoder devices have more than one camera connected to them For example a fully used four port video encoder will count as four cameras Before you begin using the wizard it is highly recommended that you import your Device License Key file into the RC C NVR Importing the file is quick and easy and it will free you from having to specify license keys manually for each hardware device later
136. are generated when hardware output Such as lights or sirens is activated etc Time spent on finding the best possible motion detection settings for each camera may help you later avoid unnecessary recordings notifications etc Depending on the physical location of the camera it may be a very good idea to test motion detection under different physical conditions day night windy calm weather etc Before you configure motion detection for a camera it is highly recommended that you have configured the camera s video properties such as compression resolution etc Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application e How to Configure Motion Detection Properties 1 Determine whether there are any areas which should be excluded from motion detection for example if the camera covers an area where a tree is swaying in the wind or where cars regularly pass by in the background If so you can avoid detection of irrelevant motion by following the points below If not continue to step 2 e Inthe Exclude regions section in lower part of the window select Enable The preview image is now divided into small sections by a grid To define areas whi
137. are ready to configure events see Add a Hardware Input Event Add a Generic Event and Add a Manual Event If you want to use timer events with your other events see Add a Timer Event If you want to configure hardware output and automatically trigger output when events occur so that for example lights are switched on when a door is opened or when motion is detected in video see Add a Hardware Output and Configure Hardware Output on Event Configure General Event Handling Before configuring events of any type configure general event handling such as which ports the NVR should use for event data Normally you can just use the default values but it is a good idea to verify that your organization is not already using the ports for other purposes 1 In the Management Application s navigation pane expand Advanced Configuration right click Events and Output and select Properties 2 Specify required properties When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add a Hardware Input Event With hardware input events you can turn input received from input units attached to hardware devices into NVR events Before you specify input for a hardware device verify that sensor operation is recognized by the hardware device Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the r
138. areUserName and HardwarePassword User name for the hardware device s administrator account If you do not specify a user name the device manufacturer s default user name for each hardware device will be used Many organizations use the hardware device manufacturers default user names for their hardware devices If that is the case in your organization there is no need to painstakingly type hardware device manufacturers On Net Surveillance Systems Inc 153 RC C User Manual Configuration default user names as this can be a source of error trust that the software will know the manufacturers default user names Note that you must always specify a password the HardwarePassword parameter even when it is not necessary to specify user name In the extremely rare cases where the user name for a hardware device is blank you cannot use the CSV method since the method interprets no password as use the hardware device manufacturer s default password If the user name for a hardware device is blank use the wizard s Manual method instead with the Manual method you can use a blank user name e HardwareDeviceName Name of the hardware device Name must unique and must not contain any of the following special characters lt gt amp J e CameraName number Name of the camera Must appear as CameraName1 CameraNamed2 etc in the header line since a hardware device can potentially have more than one camera attached Name
139. articular interest to you simply add the topic to your favorites list You can then access the topic with a single click also if you close the help window and return to it later Help topics contain various types of links notably so called expanding drop down links Clicking such a link will display detailed information immediately below the link itself the content on the topic simply expands Expanding drop down links thus help save space Tip To quickly hide all texts from expanding drop down links in a help topic simply click the title of the topic on the help system s Contents tab Printing Help Topics To print a help topic navigate to the required topic and click the help window s Print button A dialog box may ask you whether you wish to print the selected topic only or all topics under the selected heading when this is the case select Print the selected topic and click OK Tip When printing a help topic it will be printed as you see it on your screen Therefore if a topic contains expanding drop down links click each required drop down link to display the text in order for it to be included when you print This allows you to create targeted printouts containing exactly the amount of information you require On Net Surveillance Systems Inc 11 RC C User Manual Wizards Wizards Overview of Wizards Wizards guide you through common tasks in e The Add Hardware Devices wizard helps you add cameras and other hard
140. as in the list click the Select All button e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Apply template on selected cameras Lets you apply the value from the template to selected cameras Video settings typically let you control bandwidth brightness compression contrast resolution rotation etc All properties on a white background are editable properties on a light blue background cannot be edited Use the list in the left side of the wizard window to select a camera and adjust its video settings Then select the next camera and adjust its settings and so on Video settings are to a large extent camera specific and must therefore be configured individually for each camera e Click the Open Settings Dialog button to configure the camera s settings in a Open Settings Dialog separate dialog When you change video settings they are applied immediately This means that for most cameras you are immediately able to see the effect of your settings in a preview image However it also means that you cannot undo your changes by exiting the wizard For cameras set to use the video formats MPEG or H 264 you are typically able to select which live frame rate to use for the camera On Net Surveillance Systems Inc 163 RC C User Manual Configuration Video settings may feature an Include Date and Time setting If set t
141. ase will be archived o Delete no repair If the database becomes corrupted the contents of the database will be deleted O Archive no repair If the database becomes corrupted the contents of the database will be archived No video can be recorded in a database while it is being repaired For large installations a repair may take several hours especially if the Repair scan delete if fails action which involves two different repair methods is selected and the first repair method fast repair fails Tip There are several things you can do to prevent that your databases become corrupt in the first place See Protect Recording Databases from Corruption Configure Dynamic Paths With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the drive containing the camera s database is among the path you have selected for dynamic archiving the NVR will always try to archive to that path first If not the NVR automatically archives to the archiving path with the most available space at any time provided there is not a camera database using that drive See also Dynamic Path Selection Recording amp Archiving Paths All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Recording and Archiving Paths properties can also be specified individually for each camera Template The template can help you configure s
142. ases This will happen if o there is less than 5 disk space left and the available disk space goes below 20 GB plus 1 GB per camera or o the available disk space goes below 75 MB plus 10 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 175 MB 75 MB plus 10 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 5 disk space left On Net Surveillance Systems Inc 16 RC C User Manual Configuration amp Properties IMPORTANT You will lose the data deleted as part of the database resizing process When the recording server is restarted upon such database resizing the original database sizes will be used You should therefore make sure the drive size problem is solved or adjust camera database sizes to reflect the altered drive size Tip Should the database resizing procedure take place you will be informed in log files and if set up through an e mail notification e Backing Up Archives Many organizations want to back up recordings from cameras using tape drives or similar Creating such backups based on the content of camera databases is not recommended it may cause sharing violations or other malfunctions Instead create such backups based on the content of archives If you have not specified separate archivin
143. assword is required to use the SMTP server Username Only required when Server requires login is selected Specify the user name required for using the SMTP server On Net Surveillance Systems Inc 46 RC C User Manual Camera Specific Properties e Password Only required when Server requires login is selected Specify the password required for using the SMTP server SMS Notifications e Enable SMS Enables the use of SMS notifications allowing you to specify further properties e GSM modem connected to Select port connecting the RC C server to the GSM modem e SIM card PIN code Specify PIN code for the SIM card inserted in the GSM modem e SIM card PUK code Specify PUK code that is unlocking code for the SIM card inserted in the GSM modem e SMS central phone number Specify the number of the SMS central to which the GSM modem should connect in order to send SMS notifications e Recipient phone number Specify the number of the mobile telephone to which SMS alerts should be sent It is only possible to send SMS notifications to a single telephone number e Message Specify required message text for the SMS notification Message text must be no longer that 160 characters and must only contain the following characters a z A Z 0 9 as well as commas and full stops Note that camera information as well as date and time information is automatically included in SMS notifications Tip While you write the counter below the
144. assword to be used when communicating with the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one NetMatrix recipient is an Ocularis Client Select check box if the NetMatrix recipient in question is an Ocularis Client NetMatrix triggered live video may also be displayed in RC C users Ocularis Clients If an Ocularis Client is used distribution of the NetMatrix triggered live video takes place slightly differently Clear Removes any content in the Name Address and Password fields Update Updates the properties of the selected NetMatrix recipient with the changes made during editing Available only if you have edited the properties of an existing NetMatrix recipient Add Adds the new NetMatrix recipient to the list Available only if you have added properties of a new NetMatrix recipient in the Name Address Port Password and possibly Ocularis Client fields Network Device Type amp License When configuring hardware devices specify the following properties Address P address or host name of the hardware device HTTP port Port to use for HTTP communication with the hardware device Default is port 80 To use the default port select Use default HTTP port FTP port Port to use for FTP communication with the hardware device Default is port 21 To use the default port select Use default FTP port User name User name for the hardware device s administrator account Man
145. at input and output controlled operations are supported for the hardware device and firmware used If you are using several NVR servers in a master slave setup input and output on a specific hardware device should be defined on one of the servers only Do not define the same input or output on the same hardware device on several servers This applies even for dedicated input output devices e Moving on You do not have to configure hardware input units separately any hardware input units connected to hardware devices are automatically detected when you add the hardware devices to the RC C recorder The same goes for hardware output but hardware output does require some simple configuration in the NVR Before configuring events of any type configure general event handling such as which ports the NVR should use for event data Normally you can just use the default values but it is a good idea to verify that your organization is not already using the ports for other purposes See Configure General Event Handling When you are ready to configure events see Add a Hardware Input Event Add a Generic Event and Add a Manual Event If you want to use timer events with your other events see Add a Timer Event If you want to configure hardware output and automatically trigger output when events occur so that for example lights are switched on when a door is opened or when motion is detected in video see Add a Hardware Output and Configure Ha
146. at can be problematic since pre recording does not work well during archiving e Post recording You can store recordings from periods following detected motion and or stop events Select check box to enable this feature Remember to specify required number of seconds in the neighboring column e Seconds of post recording Specify the number of seconds for which you want to record video from after recording stop conditions that is motion or stop event are met Usually only some seconds of post recording is required but you can specify up to 65535 seconds of post recording corresponding to 18 hours 12 minutes and 15 seconds However if specifying a very long post recording time you can potentially run into a scenario where your post recording time spans scheduled or unscheduled archiving times That can be problematic since post recording does not work well during archiving e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Pre Post Stait Event Stop Event recording Seconds Seconds vl v g Example Only the selected value is appl
147. ata packages o Search in order for the event to occur the received package must contain the message specified in the Event message expression field but may also have more content Example If you have specified that the received package should contain the terms User001 and Door053 the event will be triggered if the received package contains the terms User001 and Door053 and Sunday since your two required terms are contained in the received package o Match in order for the event to occur the received package must contain exactly the message specified in the Event message expression field and nothing else e Send e mail if this event occurs Only available if e mail notification is enabled Select if the NVR should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notifications also keep in mind individual cameras scheduling e Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box e Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select if the NVR should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notification configuration When using SMS notifi
148. ation you will be asked whether you want to move the archived recordings to the new location recommended leave them at the old location or delete them Note that if moving archived recordings RC C will also archive what is currently in the camera s database in case you wonder why the camera database is empty just after you have moved archived recordings this is the reason e Delete Archives Click button to delete all archived recordings for the camera Recordings in the camera s regular database will not be affected The ability to delete is available regardless of whether you use a single archiving path or dynamic archiving paths IMPORTANT Use with caution all archived recordings for the camera will be permanently deleted As a security measure you will be asked to confirm the deletion e Retention time Total amount of time for which you want to keep recordings from the camera that is recordings in the camera s database as well as any archived recordings Default is 30 days Note that the retention time covers the total amount of time you want to keep recordings e Database repair action Select which action to take if the database becomes corrupted o Repair scan delete if fails Default action If the database becomes corrupted two different repair methods will be attempted a fast repair and a thorough repair If both repair methods fail the contents of the database will be deleted o Repair delete if fails f the databa
149. ation with the hardware device Default is port 80 HardwarePassword Password for the hardware device s administrator account For security reasons most organizations use their own passwords rather than device manufacturers passwords Optional Parameters You can furthermore include these optional parameters regardless whether cameras and server are online or offline e HardwareUserName and HardwarePassword User name for the hardware device s administrator account If you do not specify a user name the device manufacturer s default user name for each hardware device will be used Many organizations use the hardware device manufacturers default user names for their hardware devices If that is the case in your organization there is no need to painstakingly type hardware device manufacturers default user names as this can be a source of error trust that the software will know the manufacturers default user names Note that you must always specify a password the HardwarePassword parameter even when it is not necessary to specify user name In the extremely rare cases where the user name for a hardware device is blank you cannot use the CSV method since the method interprets no password as use the hardware device manufacturer s default password If the user name for a hardware device is blank use the wizard s Manual method instead with the Manual method you can use a blank user name HardwareDeviceName Name of the har
150. ault is every 240 milliseconds that is close to once every quarter of a second The interval is applied regardless of your cameras frame rate settings The access summary simply lists which cameras your users will have access to When using the wizard all users you have added will have access all to cameras including any new cameras added at a later stage On Net Surveillance Systems Inc 159 RC C User Manual Configuration You can however limit individual users access to cameras by changing their individual rights You can add client users in two ways which may be combined e Basic user Lets you create a dedicated surveillance system user account with basic user name and password authentication for each individual user To add a basic user specify required user name and password and click the Add Basic User button Repeat as required e Windows user Lets you import users defined locally on the server or users from Active Directory and authenticate them based on their Windows login This generally provides better security and is the recommended method The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and
151. available from the internet The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization Max number of clients Up to five clients at a time are able to connect to the surveillance system from a remote location Depending on your configuration and the performance of the hardware and network used limiting the number of simultaneously connected clients may help reduce server load If more than the allowed number of simultaneously connected clients attempt to log in only the allowed number of clients will be allowed access Any clients in excess of the allowed number will receive an error message when attempting to log in A four minute session timeout period applies for client sessions on In many cases client users may not notice this at all However the session timeout period will be very evident in some cases for example if you set the Max number of clients value to 1 When this is the case and the single allowed client user logs out four minutes must pass before it will be possible to log in again Max number of clients You can limit the number of clients allowed to connect at the same time Depending on your configuration and the performance of the hardware and network used limiting the number of simultaneously connected clients may help reduce server load If more than the allowed number of simultaneously connected clients attempt to log in only the allowed number of clients w
152. available to your organization s users through the Download Manager You can remove installation files for non required features from the surveillance system server This can help you save disk space on the server if you know that your organization is not going to use certain features for example non relevant language versions 1 Open the Installers folder located in the RC C installation folder typically at C Program Files OnSSI RC C Installers 2 Select the required language sub folder then delete the unwanted installation exe files Remove the NVR Download Manager To remove the NVR Download Manager separately from the other surveillance server software 1 In Windows Start menu select Control Panel and select Add or Remove Programs 2 Inthe Add or Remove Programs window s list of currently installed programs select NVR Download Manager 3 Click the Remove button Remove the Surveillance Server Software To remove the server software not including the Download Manager or the Ocularis Client do the following What happens to recordings Your recordings will not be removed they will remain on the server even after the server software has been removed Likewise the configuration file will remain on the server this allows you to reuse your configuration if you later install again 1 Shut down all components 2 In Windows Start menu select Control Panel and select Add or Remove Programs 3 Inthe Add or Rem
153. ave Configuration button in the Management Application s toolbar e Camera specific Lets you specify video recording and camera specific settings such as event notification PTZ preset positions etc for each individual camera 1 In the Management Application s navigation pane expand Advanced Configuration and expand Cameras and Storage Information 2 Right click the required camera and select Properties 3 Specify properties as required for Camera Frame Rate Video Audio Recording Recording amp Archiving Paths Event Notification Output Motion Detection amp Exclude Regions and if applicable PTZ Preset Positions PTZ Patrolling and PTZ on Event 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 21 RC C User Manual Cameras amp Recordings View Video from Cameras in Management Application You can view live video from single cameras directly in the Management Application 1 In the Management Application s navigation pane expand Advanced Configuration and expand Cameras and Storage Information 2 Select the required camera to view live video from that camera Above the live video you will find a summary of the most important properties for the selected camera Below the live video you will find information about the camera s resolution and average image file size For cameras using MPEG or H 264 you wil
154. ave more than one camera attached Names must be unique and must not contain any of the following special characters lt gt amp e CameraShortcut number Number for keyboard shortcut access to the camera in the Ocularis Client Must appear as CameraShortcut1 CameraShortcut2 etc in the header line since a hardware device can potentially On Net Surveillance Systems Inc 189 RC C User Manual Configuration have more than one camera attached A camera shortcut number must not contain any letters or special characters and must not be longer than eight digits e GenerateNewCameraGuid optional number Lets you specify whether to generate a new GUID for a camera this is especially relevant if using a cloned configuration as your template since all GUIDs are removed from cloned configurations If specified as for example GenerateNewCameraGuid1 information relates to a specific camera otherwise to all cameras attached to the hardware device Any character means yes generate a new GUID e PreBufferLength optional number Required length in seconds of pre recording If specified as for example PreBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device e PostBufferLength optional number Required length in seconds of post recording If specified as for example PostBufferLength1 information relates to a specific camera otherwise to all cameras attache
155. ber of simultaneously connected clients attempt to log in only the allowed number of clients will be allowed access Any clients in excess of the allowed number will receive an error message when attempting to log in By default a maximum of ten simultaneously connected clients are allowed To specify a different maximum number simply overwrite the value Tip To allow an unlimited number of simultaneously connected access clients type 0 zero in the Max number of clients field A four minute session timeout period applies for client sessions on In many cases client users may not notice this at all However the session timeout period will be very evident if you set the Max number of clients value to 7 When that is the case and the single allowed client user logs out four minutes must pass before it will be possible to log in again Local IP Ranges When configuring server access that is clients access to the RC C server you can specify IP address ranges which the NVR should recognize as coming from a local network This can be relevant if different subnets are used across your local network 1 Click the Add button 2 Inthe Start Address column specify the first IP address in the required range 3 In the End Address column specify the last IP address in the required range Tip If required an IP address range may include only one IP address example 192 168 10 1 192 168 10 1 4 Repeat if other local IP address range
156. button Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp Shortcut Camera shortcut may be used in certain access clients Recording Path Path to the folder in which the camera s database should be stored Default is C VideoData To browse for another folder click the browse icon next to the required cell You are only able to specify a path to a folder on a ocal drive You cannot specify a path to a network drove The reason for this limitation is that if you were using a network drive it would not be possible to save recordings if the network drive became unavailable If you change the recording path and there are existing recordings at the old location you will be asked whether you want to move the recordings to the new location recommended leave them at the old location or delete them Tip If you have several cameras and several local drives are available you can improve performance by distributing individual cameras databases across several drives Archiving Path Only editable if not using dynamic paths for archiving Path to the folder in which the camera s archived recordings should be stored Default is C VideoData To browse for another folder click the browse icon next to the requi
157. c cheat h desea vl weed ose rel Oy ean aan a Ease dodo al vena Ce aes 105 NVR Download Manageb 2 c ccsceeseeeeeeeeeeeeeeeseenseeneeeeeeeeseeeseeesueesueessnesseeeseeeseeesaees 106 Using the NVR Download Manager eccceecceeeee cess sense eeeeceaeeeeeeeeaeeseeeesaeeseeeseeesneeseaeeseeeseeeseaeseeeseseeseaeseeessaeeeaeeeed 106 Initial LOOK Coen eee ee ee ere ee ee er Tee err ree er AN 106 On Net Surveillance Systems Inc v RC C User Manual Table of Contents NVR Download Manager s Tree Structure Explaine cc ccece cece n nnn eaeaeaeaeneas 106 Installing New Features On SOIVER maii seseratan aaa ta hee F545 GAG Aa a aS aT ae SAG ee Te aa a teeta EA 107 Making New Features Available through the Download ManaQel 10c1ccece ence eee ee teste eee tet ne teeta enaetne es 107 Recording Server Manager 2 s ccseccseecseeeeeeeeeeceeeeeeeeneneeseeeseeeseeesueesueescesseeeseeeseeesaes 108 Using the Recording Server Manager rr N tMatrix Monitor Introduction ss 2 2csiccchcet salspadias casas licagadcencsclpeesgar seaacdbesslceeaginetddesiecteidcegesstheeahccengiacstaaieiauhlereesbenaeste ONSSI Viewer Introduction i ti a cecccccstis vensavelscesecscden ees cavnenvancasates vavslsevovcareda conse Ea a E ea a aE aaia aaa Eiaa E BACKUP EAE EASA E A EA S A EEA O E A E EA Syst m Configuration Backups seraient aeee AeA Ped aaar namata ipara n desni aie a leirod ans Lanina a daana iaaii aeaaea aaae
158. camera You import preset positions which have previously been defined and stored on the PTZ camera itself through the camera s own configuration interface The number of allowed preset positions depends on the PTZ camera and driver used Type 3 stored on camera You define preset positions by moving the camera with the controls in the upper half of the window then storing each required position in the camera s own memory You are able to define up to 2550 preset positions this way If preset positions have already been defined for the camera you can simply import them for use with RC C For PTZ types 1 and 3 you can move the PTZ camera to required positions PTZ orev O O O wee n ww Neto Ths comers appots PTZ presst By simply clicking the required position in the camera preview if supported by the camera By using the sliders located near the camera preview to move the PTZ camera along each of its axes the X axis for panning left right the Y axis for tilting up down and the Z axis for zooming in and out to zoom in move the slider towards Tele to zoom out move the slider towards Wide By using the navigation buttons Moves the PTZ camera up and to the left Moves the PTZ camera up Moves the PTZ camera up and to the right Moves the PTZ camera to the left Moves the PTZ camera to its home position that is default position Moves the PTZ camera to the right Moves the PTZ camera d
159. can only add individual users from Active Directory to Active Directory also supports groups of users but you cannot add such groups to You can however group individual users in and quickly assign common user rights for all users within such groups Add Windows users the following way 1 Click the Add Windows User button This will open the Select Users or Groups window Select Users or Groups x Select thes object type Users Groups of Bulin secunty pencipals Object Types From thes location Ent Enter the object names to select omc C By default you will be able to make selections from your entire directory If you want to narrow this click the Select Users and Groups window s Locations button and select the location you require 2 Inthe Enter the object names to select box type the required user names then use the Check Names feature to verify that the user names you have entered are recognized Example Brian Hannah Karen Wayne 3 When ready click OK When a user who has been added from a local database logs in with a client the user should not specify any server name PC name or IP address as part of the user name Example of a correctly specified user name USERO01 Example of an incorrectly specified user name PC001 USERO001 The user should of course still specify a password and any required server information On Net Surveillance Systems Inc 161 RC C User Manual Conf
160. cated in C Documents and Settings All Users Application Data OnSS l Recorders if running Windows XP or C ProgramData OnSSI Recorders if running Windows Vista When you later want to back up your configuration you can simply make a copy of the file configuration xml typically located in a folder under C Documents and Settings All Users Application Data if running Windows XP or C ProgramData if running Windows Vista e Upgrade Video Device Drivers Video device drivers are small programs used for controlling communicating with the hardware devices connected to a RC C system Video device drivers are installed automatically during the installation of your RC C system However new versions of the video device drivers also called Device Packs are released and made available for from time to time We therefore recommend that you regularly visit the OnSSI website look under Support gt Downloads Demos Manuals Tutorials amp White Papers and download the latest Device Pack When updating video device drivers there is no need to remove the old video device drivers first simply install the latest version on top of any old version you may have For detailed information see Update Video Device Drivers e Upgrade Ocularis Clients Ocularis Client users should remove their old Ocularis Client versions and install the new one 1 On the required computers open a browser and connect to RC C at the following address http IP address
161. cations also bear in mind individual cameras scheduling e Delete Lets you delete a selected event e Add Lets you add a new event When the Generic Events node is selected clicking Add will add a new generic event When a specific generic event is selected clicking Add will add a timer event to the selected generic event Group Information e Group name Lets you edit the group name Group names must be unique and must not contain the following characters lt gt amp Hardware Input Event When adding hardware input events some properties depend on the selected type of input e Enable Select check box to use selected type of input as an event in the NVR and specify further properties e Event name Specify a name for the event Hardware input event names must be unique and must not contain the following characters lt gt amp 2 Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details On Net Surveillance Systems Inc 127 RC C User Manual Configuration e Images from camera Only relevant if using pre and post alarm images a feature available for selected cameras only it enables sending of images from immediately before an event took place from the camera to the surveillance system via e mail Pre and post alarm images should not be confused with the NVR s own pre and post recording feature Lets you s
162. ccess also the wizard when dealing with a hardware device s Network Device Type amp License properties Delete Hardware Devices IMPORTANT Deleting a hardware device will not only delete all cameras speakers and microphones attached to the hardware device It will also delete any recordings from cameras on the hardware device 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices right click the hardware device you want to delete and select Delete Hardware device 2 Confirm that you want to delete the hardware device and all its recordings 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Restart the Recording Server service If you find that deleting a hardware device is not the right thing to do consider disabling the individual cameras speakers or microphones connected to the hardware device instead 1 Inthe Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device in question 2 Right click the camera microphone or speaker you want to disable and select Disable 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Restart the Recording Server service On Net Surveillance Systems Inc 59 RC C User Manual Wizard Wizard Add Hardware Devices Wi
163. ch should be excluded from motion detection drag the mouse pointer over the required areas in the preview image while pressing the mouse button down Left mouse button selects a grid section right mouse button clears a grid section Selected areas are highlighted in blue Occasionally you may also want to take advantage of further exclude regions features e Show grid Lets you toggle the grid on and off Toggling the grid off may provide a less obscured view of the preview image selection of areas which should be excluded from motion detection takes place the same way as when the grid is visible e Set All Lets you quickly select all grid sections in the preview image This may be advantageous if you want to exclude motion detection in most areas of the image in which On Net Surveillance Systems Inc 131 RC C User Manual Configuration case you can simply clear the few sections in which you do not want to exclude motion detection Clear All Lets you quickly clear all grid sections in the preview image Auto Makes automatically detect areas with insignificant changes in individual pixels which should not be regarded as motion and automatically mark such areas for exclusion from motion detection As the automatic detection is based on an analysis of one second of video it may take a short while before you see the result The automatic detection takes place according to the sensitivity setting specified in step 2 In order for th
164. clamation mark indicating that there is additional configuration to be done Right clicking an event brings up a list of options for the selected event 95 Alum Cental Daplay 1 Motion on Back Dox West Winal Camera B Delete Motion on Back Door West Wing Camera b Connect Otconnect then connect Deconnect e Delete selected event Deletes selected event on selected device e Connect Connects to the camera actual camera is specified after selecting action to be taken e Disconnect then connect Disconnect any existing connections then connect again With this option the live video will appear in the NetMatrix recipient on a first in first out basis Each time a new event occurs video from the latest event is displayed prominently in a specific position on the NetMatrix recipient while at the same time video from the older events is shifted to less prominent positions and eventually pushed out of the NetMatrix recipient in order to make space for the latest event s video With the Connect option you may thus experience that if video triggered by one event on a camera is already shown on the NetMatrix recipient videos triggered by another event on the same camera will not be displayed prominently as coming from the latest event simply because the NetMatrix recipient is already showing video from the camera in a less prominent position By selecting Disconnect then connect you can avoid this issue and ensure that video from the
165. clicking the Save Configuration button in the Management Application s toolbar Configure Hardware Devices Once you have added hardware devices you can specify edit device specific properties such as the IP address which video channels to use which COM ports to use for controlling attached PTZ Pan Tilt Zoom cameras etc 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices right click the required hardware device and select Properties 2 Specify Name amp Video Channels Network Device Type amp License and PTZ Device properties as required 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Hardware Output on Event Once you have added hardware output such as lights sirens door openers etc you can associate the hardware output with events This way particular hardware output can be activated automatically when events occur Example When a door is opened hardware input event lights are switched on hardware output When making the associations you can select between all output and events defined on the NVR you are not limited to selecting output or events defined on particular hardware devices 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Output Control on Event and select Properties 2 Inthe Event
166. clients If required you can overwrite the existing speaker name with a new one Speaker names must be unique and must not contain any of the following special characters lt gt amp On some hardware devices audio can also be enabled disabled on the hardware device itself typically through the hardware device s own configuration web page If audio on a hardware device does not work after enabling it in the Management Application you should thus verify whether the problem may be due to audio being disabled on the hardware device itself Speedup When you configure scheduling for specific MJPEG cameras you can specify speedup periods Before you can define this type of schedule speedup must be enabled You specify a camera s speedup periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in olive green juajdanjudageaa Speedup may also take place based on events but that is configured elsewhere See Frame Rate MJPEG General Recording amp Storage Properties and Frame Rate Camera specific Properties The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule pr
167. clude video format resolution motion detection sensitivity where to store and archive recordings any PTZ Pan Tilt Zoom preset positions association with microphones and speakers etc See Configure Video amp Recording Settings What does archive recordings mean Archiving an integrated and automated feature helps you store recordings beyond the capabilities of RC C s standard database Archiving thus maximizes storage capacity and minimizes risk See Archiving Extends Recording Storage O Configure Events Input amp Output If required system events for example based on input from sensors etc can be used for automatically triggering actions in RC C Examples of actions starting or stopping recording on cameras switching to a particular video frame rate making PTZ cameras move to specific preset positions Events can also be used for activating hardware output such as lights or sirens See Overview of Events Input amp Output O Configure Scheduling When do you want to archive Do you want some cameras to transfer video to RC C at all times and other cameras to transfer video only within specific periods of time or when specific events occur With the scheduling feature you can specify this as well as when you want to receive notifications from the system For PTZ cameras with patrolling automatic movement between preset positions you are furthermore able to specify use of specific patrolling profiles for specific
168. clude Image Select check box to include still images in e mail notifications When selected a still JPEG image from the time the triggering event occurred will be attached to each e mail notification Do not send e mail on camera failures f selected e mail notifications will not be sent if the NVR loses contact with a camera Otherwise automatic e mail notifications will be sent in such cases regardless of any scheduled e mail notification periods Time between motion and database related e mails per camera Minimum time in minutes to pass between the sending of each e mail notification per camera This interval only applies for e mail notification generated by detected motion or database related events e mail notification generated by other types of events will still be sent out whenever the events occur Examples If specifying 5 a minimum of five minutes will pass between the sending of each motion or database related e mail notification per camera even if motion or database events are detected in between If specifying 0 e mail notifications will be sent each time motion or database events are detected potentially resulting in a very large number of e mail notifications being sent If using the value 0 you should therefore consider cameras motion detection sensitivity settings Sender e mail address Type the e mail address you wish to appear as the sender of the e mail notification Outgoing mail SMTP server name Type the n
169. column select the required event 3 Inthe Output column select the hardware output you want to be activated by the event 4 Click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar You can use a single event for activating more than one output You cannot delete associations but you can change your selections or select None in both columns as required Tip If you have not yet defined any suitable event or output you can quickly do it Use the Configure events list and or Configure Output button located below the list of associations On Net Surveillance Systems Inc 181 RC C User Manual Configuration Configure the Management Application Password Protection By default anyone who is able to log in to the RC C server is able to use the Management Application The reason for this is that such people are likely to have administrator rights If required you can password protect access to the Management Application for additional security 1 In the Management Application s navigation pane expand Advanced Configuration expand Users right click Administrator and select Properties 2 Under Management protection select Enable 3 Specify required password and repeat it to be sure you have specified it correctly Only use the Old password field if changing an existing password or disabling management protection in which case the old password is require
170. compatible with mobile phone networks where you are going to use it with RC C To configure SMS notifications do the following 1 In the Management Application s Navigation pane expand Advanced Configuration right click SMS and select Properties 2 Enable the use of SMS by selecting the Enable SMS check box 3 Specify required properties Tip You can test your SMS notification configuration by clicking the Test button this will send a test SMS to the specified recipient Note that you must stop the Recording Server service while you perform the test remember to start the service again afterwards When ready click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When configuring SMS alerts also consider the SMS notification schedules configured for each camera Configure Speakers Configuration of speakers is very basic settings such as volume etc are controlled on the speaker units themselves 1 Inthe Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device to which the required speaker is attached 2 Right click the required speaker and select Properties 3 Specify properties as required 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure System Event and Audit Logging Various logs are generate
171. contains cameras or other devices which were not present in the selected restore point You will be asked whether you want to delete or keep recordings from affected devices If keeping the recordings note that they will not be accessible until you add the affected devices to NVR again Select the required option and click OK 6 Click OK in the Restore Points dialog 7 Inthe Management Application s navigation pane expand Advanced Configuration and select Services 8 For the Recording Server and Image Server services respectively click the Restart button When the two services are restarted the configuration from the selected restore point is applied Export amp Import System Configuration You can export the current configuration of the RC C NVR either as a safety measure in order to have a backup file of your configuration or a as a clone allowing you to use a similar configuration elsewhere You are subsequently able to import previously exported configurations e Export Configuration as Backup With this option all relevant NVR configuration files will be combined into one single file which can then be saved at a location specified by you Note that if there are unsaved changes to your configuration they will automatically be saved when you export the configuration 1 In the Management Application s File menu select Export Configuration Backup 2 Browse to the location at which you want to store the exported configuratio
172. cording stop conditions that is motion or stop event are met Usually only some seconds of post recording is required but you can specify up to 65535 seconds of post recording corresponding to 18 hours 12 minutes and 15 seconds However if specifying a very long post recording time you can potentially run into a scenario where your post recording time spans scheduled or unscheduled archiving times That can be problematic since post recording does not work well during archiving e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Stat Evert Stop Evert Pre Post recording Seconds Seconds vi v CJ Example Only the selected value is applied using this method On Net Surveillance Systems Inc 26 RC C User Manual General Recording amp Storage Properties e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Manual Recording When manual recording is enabled Ocularis Client users with the necessary rights can manually start recording if they see something of interest while vi
173. crophones related to the selected camera s Outgoing audio Ability to talk to audiences through speakers related to the selected camera s o Manual recording Ability to manually start recording for a fixed time defined by the surveillance system administrator In the Playback column the following features all selected by default are available e Playback Ability to play back recorded video from the selected camera o AVI JPEG Export Ability to export evidence as movie clips in the AVI format and as still images in the JPEG format o Database Export Ability to export evidence in database format Sequences Ability to use the Sequences feature when playing back video from the selected camera o Smart Search Ability to use the smart search feature with which users can search for motion in one or more selected areas of images from the selected camera o Audio Ability to listen to recorded audio from microphones related to the selected camera s Why can I not select certain features Typically because the selected camera does not support the features For example you can only select PTZ related features if the camera is a PTZ camera Also some of the features depend on the user s group s General Access properties For example in order have access to PTZ or output features the user group must have access to viewing live video in order to use AVI JPEG export the user group must have access to playing back recorded
174. ction As an alternative to using the slider you may specify a value between 0 and 10000 in the field next to the slider to control the motion setting 3 Specify required Motion detection interval that is how often motion detection analysis should be carried out on video from the camera The interval is measured in milliseconds default is 240 milliseconds that is close to once every quarter of a second The interval is applied regardless of the camera s frame rate settings e Motion Detection and PTZ Cameras Motion detection generally works the same way for PTZ Pan Tilt Zoom cameras as it does for regular cameras However e Itis not possible to configure motion detection separately for each of a PTZ camera s preset positions e In order not to activate unwanted recording notifications etc motion detection is automatically disabled while a PTZ camera moves between two preset positions After a number of seconds the so called transition time specified as part of the PTZ camera s PTZ patrolling properties motion detection is automatically enabled again On Net Surveillance Systems Inc 132 RC C User Manual Configuration Name amp Video Channels e Hardware name Name of the hardware device as it will appear in the Management Application If required you can overwrite the existing hardware device name with a new one Hardware device names must be unique and must not contain any of the following special characters l
175. ction place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned On Net Surveillance Systems Inc 80 RC C User Manual Scheduling 06 00 0800 Pe eS ay e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message E Mail Notification When configuring scheduling for specific cameras you can specify e mail notification periods Before you can define this type of schedule e mail notification must be enabled You specify a camera s e mail notification periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in blue lial The RC
176. d specify required properties If configuring your cameras through the Configure Video amp Recording Wizard the wizard also lets you configure archiving paths Configure Archiving Schedules automatically archives recordings if a camera s database becomes full in earlier versions this was an option configured individually for each camera You are furthermore able to schedule archiving at particular points in time up to 24 times per day with minimum one hour between each one This way you can proactively archive recordings so databases will never become full As a rule of thumb the more you expect to record the more often you should archive There are two ways in which to configure archiving schedules e While configuring your cameras through the Configure Video amp Recording Wizard in which case you configure your archiving schedule on the wizard s Drive selection page e As part of the general Scheduling amp Archiving Paths properties In the Management Application s navigation pane expand Advanced Configuration right click Scheduling and Archiving select Properties select Archiving in the dialog and specify required properties Configure Camera specific Schedules With camera specific scheduling you can configure when e Acamera should be online that is transfer video to the NVR e A camera should use speedup that is use a higher than normal frame rate e You want to receive any e mail and or SMS notifications r
177. d and how much space is free on the system do the following 1 In the Management Application s navigation pane expand Advanced Configuration and select Cameras and Storage Information 2 View the Storage Usage Summary for the following information which drives are available what drives are used for the size of each drive as well as how much video data other data and free space there is in each drive Database Resizing In case the recordings for a camera get bigger than expected or the available drive space is suddenly reduced in another way an advanced database resizing procedure will automatically take place If archives are present on the same drive as the camera s database the oldest archive for all cameras archived on that drive will be moved to another drive moving archives is only possible if you use dynamic archiving with which you can archive to several different drives or if moving is not possible deleted If no archives are present on the drive containing the camera s database the size of all camera databases on the drive will be reduced by deleting a percentage of their oldest recordings thus temporarily limiting the size of all databases When the Recording Server service is restarted upon such database resizing the original database sizes will be used You should therefore make sure that the drive size problem is solved On Net Surveillance Systems Inc 22 RC C User Manual Cameras amp Recordings Sho
178. d by the NVR To configure logging do the following 1 In the Management Application s Navigation pane expand Advanced Configuration right click Logs and select Properties 2 Specify required properties for e General system logs Management Application log Recording Server service log Image Server service log Image Import service log e The event log On Net Surveillance Systems Inc 185 RC C User Manual Configuration e The audit log Note that only audit logging can be disabled enabled by administrators all other logs are compulsory When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure User and Group Rights User group rights are configured during the process of adding users groups see Add Basic Users Add Windows Users and Add User Groups Note that you can also add basic and Windows users through the Configure User Access wizard However when using the wizard all users you add will have access all to cameras including any new cameras added at a later stage If you at a later stage want to edit the rights of a user or group 1 In the Management Application s navigation pane expand Advanced Configuration expand Users right click the required user or group and select Properties 2 Edit General Access and Camera Access properties These properties will determine the rights of the user group 3 Click O
179. d by the new hardware device will inherit camera names recordings databases as well as any archives from the old hardware device Databases and archives will be renamed to reflect the new hardware device s MAC address and video channels The rights of users with access to the inherited cameras are automatically updated so they can view both old and new recordings Users will basically not notice the hardware device replacement since camera names will remain the same e Delete the existing database s The databases of the cameras you selected to be inherited by the new hardware device will be deleted New databases will be created for future recordings but it will not be possible to view recordings from before the hardware replacement e Leave the existing database s The databases of the cameras you selected to be inherited by the new hardware device will not be deleted New databases will be created for future recordings but even though the old databases still exist on the server it will not be possible to view recordings from before the hardware replacement Should you later want to delete the old databases deletion must take place manually 3 Ifthe new hardware device has fewer video channels than the old hardware device it will not be possible for the new hardware device to inherit all cameras from the old hardware device When that is the case you will be asked what to do with the databases of cameras that could not be inherited by the new
180. d for hardware device s administrator account In the extremely rare cases where a particular password has previously been required for a device but you now want the password to be lt blank gt you cannot use the CSV file to specify lt blank gt The reason is that no information is interpreted as leave the password as it currently is If you need the new password to be lt blank gt you should not change it through the CSV file Instead change it as part of the hardware device s Network Device Type amp License properties after you have imported the other changes through the CSV file DLK Device License Key DLK required in order to use the hardware device with the NVR HardwareDeviceName Name of the hardware device Name must unique and must not contain any of the following special characters lt gt amp J CameraName number Name of the camera Must appear as CameraName1 CameraNamed2 etc in the header line since a hardware device can potentially have more than one camera attached Names must be unique and must not contain any of the following special characters lt gt amp CameraShortcut number Number for keyboard shortcut access to the camera in the Ocularis Client Must appear as CameraShortcut1 CameraShortcut2 etc in the header line since a hardware device can potentially have more than one camera attached A camera shortcut number must not contain any letters or special characters and
181. d images to the surveillance system server via e mail e Port 80 inbound and outbound Used for HTTP traffic between the surveillance server and cameras Ocularis Client and the default communication port for the surveillance system s Image Server service HTTP HyperText Transfer Protocol is a standard for exchanging files across networks widely used for formatting and transmission of data on the world wide web e Port 554 inbound and outbound Used for RSTP Real time Streaming Protocol traffic in connection with H 264 video streaming e Port 1024 and above outbound only Used for HTTP traffic between cameras and the surveillance server e Port 1234 inbound and outbound Used for event handling e Port 1237 inbound and outbound Used for communication with the NetCentral add on product if used by your organization e Port 7008 Used for Push Video communication with Ocularis Base e Any other port numbers you may have selected to use for example if you have changed the server access port from its default port number 80 to another port number Consult the administrator of your organization s firewall if in doubt about how to open ports for traffic Virus Scanning Information Virus scanning on the RC C server and computers to which data is archived should if possible be avoided e Ifyou are using virus scanning software on the RC C server or on a computer to which data is archived it is likely that the virus scanning wi
182. d in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message Speedup When you configure scheduling for specific MJPEG cameras you can specify speedup periods Before you can define this type of schedule speedup must be enabled You specify a camera s speedup periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in olive green jusjdanjusagea Speedup may also take place based on events but that is configured elsewhere See Frame Rate MJPEG General Recording amp Storage Properties and Frame Rate Camera specific Properties The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the calendar se
183. d option Options are device specific depending on which PTZ protocols are used by the device in question If no PTZ cameras are controlled through the COM port in question select None Some of the options concern absolute and relative positioning What is that Absolute positioning is when the PTZ camera is controlled based on a single fixed position against which all other positions are measured Relative positioning is when the PTZ camera is controlled relative to its current position The table in the lower half of the dialog contains a row for each video channel on the hardware device First row from the top corresponds to video channel 1 second row from the top corresponds to video channel 2 etc e Name Name of the camera attached to the video channel in question e Type Lets you select whether the camera on the selected camera channel is fixed or moveable o Fixed Camera is a regular camera mounted in a fixed position o Moveable Camera is a PTZ camera e Port Available only if Moveable is selected in the Type column Lets you select which COM port on the video encoder to use for controlling the PTZ camera e Port Address Available only if Moveable is selected in the Type column Lets you specify port address of the camera The port address will normally be 7 If using daisy chained PTZ cameras the port address will identify each of them and you should verify your settings with those recommended in the documentation for the camera
184. d release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 08 00 aaah a e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message PTZ Patrolling When you configure scheduling for PTZ Pan Tilt Zoom cameras capable of patrolling you can specify which patrolling profiles to use at specific times Before you can define this type of schedule patrolling must be configured for the cameras in question Patrolling schedule profiles are based on use of particular patrolling profiles within particular periods of time example Mondays from 08 30 until 17 45 shown in red Use of one patrolling profile may be followed immediately by use of another example use the Daytime patrolling profile Mondays f
185. d to prove that you have the rights to make the changes 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Master and Slave Servers You can create a master slave setup of NVR servers A master slave setup will allow remote users to transparently connect to more than one server simultaneously When remote users connect to the master server they will instantly get access to the slave servers as well This feature is not necessary when Ocularis However Ocularis will support a master slave setup in a legacy environment e Configuring a Master Slave Setup 1 In the Management Application s Navigation pane expand Advanced Configuration right click Master Slave and select Properties 2 Select the Enable as master server check box 3 Click Add to add a slave server 4 Specify slave server properties When ready click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar e Adding a Slave Server To add a slave server expand Advanced Configuration in the Management Application right click Master Slave and select Add New Slave Server then specify slave server properties Slave servers can also be added from the Master Slave Properties window by clicking Add Tip Instead of specifying a host name when adding a slave server you may specify the IP address of the slave serv
186. d to the hardware device e RecordingPath optional number Path to the folder in which a camera s database should be stored If specified as for example RecordingPath1 information relates to a specific camera otherwise to all cameras attached to the hardware device e ArchivePath optional number Path to the folder in which the camera s archived recordings should be stored Remember that an archiving path is only relevant if not using dynamic paths for archiving If specified as for example ArchivePath1 information relates to a specific camera otherwise to all cameras attached to the hardware device e OldRecordingsNewPath optional number Lets you specify what to do with old recordings in case RecordingPath or ArchivePath have been changed If this parameter is not specified default behavior is Leave see the following If specified as for example OldRecordingsNewPath1 information relates to a specific camera otherwise to all cameras attached to the hardware device Valid options are Delete deletes old recordings Leave leaves old recordings for offline investigation but unavailable for online system or Move moves old recordings to archive e OldRecordingsNewMac optional number Lets you specify what to do with old recordings in case a new MAC address has been specified for the hardware device If this parameter is not specified default behavior is Leave see the following If specified as for example OldrecordingsNe
187. der at the time of the archiving viewing the file directly would actually not work since database content cannot be viewed as individual files only through the Ocularis Client In such situations the database will be put aside for archiving at a later point in time While the database is put aside a special temporary database is created for storage of new recordings This way no new recordings will be lost even though the original database is full provided enough disk space is available for storing the special temporary database RC C will wait for the next archiving occasion either scheduled or because the special temporary database also becomes full It will then archive the content of the special temporary database and thus free up space in it RC C will then continue to store new recordings in the special temporary database This will apply until the Recording Server service is restarted Once the service has been restarted the content of the original database will be archived and new recordings will again be stored in the original database The special temporary database will also be archived and will then cease to exist Can I view recordings from the special temporary database Normally the content of databases can be viewed with the Ocularis Client regardless whether the databases have been archived or not However the content of the special temporary database cannot be viewed through a client until the content has been archived O
188. dhvenpeaes 68 Management Application 70 Apply or Save Configuration Changes a A AEE 70 Change or Reset the Management Application Behavior ccccecceseeeeceeereeseeeeeeeeaeceeesaeeeeeeaesaeeeaeseseaesaeseeseeeeneeeeeaees 70 Configure the Management Application Password Protection cccccccesceeseeeeeeeeeeeeeeeceaeeeeaeeeeeeeeeeeceeeeaeeseeeeeeseeeeeeeeeee 71 Master amp Slave ServerS ssssssssssnsssnssnnssnnrnnnrnnnnnnnnnnnnnnnnnann annann anneanne annman nannan annen 72 Configure Master and Slave Servers ccccccceseeeeceeeeeeeeeeceaeeeaeeeeeeeeaeeseaeecaeecaeeeaeeseaeseaeesaeecaeeeeaesaeeseaeeeeeseaeseeeeseaeeseeeeee 72 Properties Master and Slave Properties cccecesseeeeseceeeeseeeeceeecseeeeeesecaceeseceeeeaecsecaecaecsaeeseseasaeesaesaeeeaesaeeeeesaeeneeeatens 73 Master Server Properties sao e aa nE E E a E Er EEEE IE EEE E E E EEEE OE PUTEO ETE 73 Slave Server Properties sosise aieeaa anaa aAA aE Ea Eaa Eaa AA Eaa E Aa Eaa aa AEE a Eae Eaa aaa Ea Aaa Eana Eala 73 NetMatrix Video Sharing 2 cs cccscceeceseeeesceeeeeeeeeeeeeseeeneeeseeesscensaeeaeeeaeensaeeeaeeeseeeeeees 74 Contig re N tMatrix cin tinea n odin edited eet ied a e ea ea ea dest ent aie ene tee 74 Properties NetMatrix R CIPIONtS ccccceeceeseeeeeeneeeeeeeeeseaeeeeeeaeeeeeaeeeseeaeeeseaaeeesaeeeseaeeeseaeeseeaeeeeseaeeeeeeeeeeeaeeeseneeeeeeaee 75 NetMatrix Event Control esis scevev
189. ding e Never Never record Live video will be displayed but since no video is kept in the database users will not be able to play back video from the camera e Conditionally Record when certain conditions are met When you select this option specify required conditions see the following e On built in motion detection Select this check box to record video in which motion is detected Unless post recording see the following is used recording will stop immediately after the last motion is detected e On event Select this check box to record video when an event occurs and until another event occurs Use of recording on event requires that events have been defined and that you select start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event Recording will begin when the start event occurs or earlier if using pre recording see the following e Stop event Select required start event Recording will end when the stop event occurs or later if using post recording see the following When the option Conditionally is selected you can store recordings from periods preceding and following detected motion and or specified events Example If you have defined that video should be stored when a door is opened being able to see what happened immediately pri
190. disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 10 disk space left On the archiving drive RC C automatically checks that the space required for data from a camera to be archived plus 1 GB of free disk space per camera is available If not the archive drive s oldest data from the camera in question will be deleted until there is sufficient free space for the new data to be archived IMPORTANT You will lose the archive data being deleted Same Drive Automatic Moving or Deletion of Archives if Running Out of Disk Space In the case where the RC C server is running out of disk space and the archiving drive is identical to the camera database drive RC C will automatically do the following in an attempt to free up disk space 1 First RC C will attempt to move archives moving archives is only possible if you use dynamic archiving with which you can archive to several different drives This will happen if o there is less than 15 disk space left and the available disk space goes below 40 GB plus 2 GB per camera or On Net Surveillance Systems Inc 15 RC C User Manual Configuration amp Properties o the available disk space goes below 225 MB plus 30 MB per camera example with ten cameras the server would be running
191. divided into two pages e Exclude Regions e Motion Detection Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application On Net Surveillance Systems Inc 23 RC C User Manual General Recording amp Storage Properties General Recording amp Storage Properties Recording amp Archiving Paths All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Recording and Archiving Paths properties can also be specified individually for each camera Template The template can help you configure similar properties quickly For example you have 50 cameras and you want to change the recording path archiving path and retention time for all of them Instead of having to enter the same three pieces of information 50 times you can simply enter them once in the template and then apply the template to the 50 cameras with only two clicks Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All
192. dows Users e Access Summary Add Basic Users When adding a basic user you create a dedicated surveillance system user account with basic user name and password authentication for the individual user Note that adding the user as a Windows user will provide better security If you want to include users in groups make sure you add required groups before you add users You cannot add existing users to groups You can add basic users in two ways One is through the Configure User Access Wizard the other is described here 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Basic User 2 Specify a user name User names must be unique and must not contain the following characters lt gt amp E Then specify a password and repeat it to be sure you have specified it correctly 3 Click OK On Net Surveillance Systems Inc 95 RC C User Manual Users 4 Specify General Access and Camera Access properties These properties will determine the rights of the user 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add Windows Users When adding Windows users you import users defined locally on the server or users from Active Directory and authenticate them based on their Windows login This generally provides better security than the basic user concept and is the reco
193. drive on the server network drives cannot be used for recording Use the drive for storing recordings in s regular database as well as for archiving e Recording Path Path to the folder in which to store recordings in s regular database Default is drive letter VideoData To browse for another folder click the browse icon next to the required cell You are only able to specify a path to a folder on the selected drive which must be a local drive If you change the recording path and there are existing recordings at the old location you will be asked whether you want to move the recordings to the new location recommended leave them at the old location or delete them e Archiving Path Only editable if not using dynamic path selection for archives see description in the following Path to the folder in which archived recordings should be stored To browse for another folder click the browse icon next to the required cell You can specify a path to local or networked drive as required If you change the archiving path and there are existing archived recordings at the old location you will be asked whether you want to move the archived recordings to the new location recommended leave them at the old location or delete them Total Size Total size of the drive e Free Space Amount of unused space left on the drive On Net Surveillance Systems Inc 162 RC C User Manual Configuration e Dynamic path selection for archives
194. dware device Name must unique and must not contain any of the following special characters lt gt amp J CameraName number Name of the camera Must appear as CameraName1 CameraNamed2 etc in the header line since a hardware device can potentially have more than one camera attached Names must unique and must not contain any of the following special characters lt gt amp CameraShortcut number Number for keyboard shortcut access to the camera in the Ocularis Client Must appear as CameraShortcut1 CameraShortcut2 etc in the header line since a hardware device can potentially have more than one camera attached A camera shortcut number must not contain any letters or special characters and must not be longer than eight digits On Net Surveillance Systems Inc 61 RC C User Manual Wizard PreBufferLength optional number Required length in seconds of pre recording If specified as for example PreBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device e PostBufferLength optional number Required length in seconds of post recording If specified as for example PostBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device e RecordingPath optional number Path to the folder in which a camera s database should be stored If specified as for example RecordingPath1 information relates
195. dy defined preset In the list select the preset position you want to delete then click the button Before you delete a preset position make sure it is not used in PTZ patrolling or PTZ on event Since the preset positions are stored on the camera you can bring a deleted preset position back into RC C by clicking the Import refresh button If you bring back a preset position this way and the preset position is to be used in PTZ patrolling or PTZ on event you must manually configure PTZ patrolling and or PTZ on event to use the preset position again Test Lets you try out a preset position In the list select the preset position you want to test then click the Test button to view the camera move to the selected position e Sanad 5 Lets you move a preset position selected in the list up and down respectively The selected preset position is moved one step per click By moving preset positions up or down you can control the sequence in which preset positions are presented in clients Recording amp Archiving Paths e Recording path Path to the folder in which the camera s database should be stored Default is C VideoData To browse for another folder click the browse button next to the Recording path field You are only able to specify a path to a folder on a local drive If using a network drive it would not be possible to save recordings if the network drive became unavailable If you change the recording path and there are
196. e If you have specified 15 frames per second in normal mode you cannot specify 16 frames per minute or hour in speedup mode e Speedup on Lets you select under which conditions to use speedup frame rates o Motion Detection Select this to speed up when motion is detected Normal frame rates will be resumed immediately after the last motion is detected o Event Select this to speed up when an event occurs and until another event occurs Use of speedup on event requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to speed up when motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns Schedule only Select this to speed up according to the camera s speedup schedule only e Start Event Select required start event The camera will begin using the speedup frame rates when the start event occurs e Stop Event Select required start event The camera will return to the normal frame rates when the stop event occurs e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera On Net Surv
197. e able to transfer video to the NVR If required you can disable an individual camera in which case no video audio will be transferred from the camera source e Camera name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp Tip Camera names can be very long if required the upper limit is more than 2000 characters although such long camera names are hardly ever needed e Camera shortcut number Users of some clients can take advantage of keyboard shortcuts some of which let the users toggle between viewing different cameras Such shortcuts include numbers which are used to identify each camera Camera Access In most cases when using Ocularis all users should be given full access to all cameras and devices Restrictions are applied in the Ocularis Administrator application The information provided here is for informational purposes In the list of cameras use the Access column to select which cameras the user groups should have access to Note the last item in the list Rights for new cameras when added to the system with which you can allow the user group access to any future cameras Then for each camera use the Camera column to select the camera and then specify which features the user group should hav
198. e camera Select number of frames then select required interval per second minute or hour in the Frame Rate Time Base column The frame rate must be higher than the recording frame rate specified under normal mode e Frame Rate Time Base Select required unit for live and recording speedup frame rates per second minute or hour Note that you can only select time bases that let you speed up frame rates Example If you have specified 15 frames per second in normal mode you cannot specify 16 frames per minute or hour in speedup mode e Speedup on Lets you select under which conditions to use speedup frame rates o Motion Detection Select this to speed up when motion is detected Normal frame rates will be resumed immediately after the last motion is detected o Event Select this to speed up when an event occurs and until another event occurs Use of speedup on event requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to speed up when motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns o Schedule only Select this to speed up according to the camera s speedup schedule only e Start Even
199. e editable properties on a light blue background cannot be edited By default cameras added to will automatically be online A ways on and you will only need to modify their online schedules if you require cameras to be online only at specific times or events Note however that this default may be changed as part of the scheduling options For each camera you are initially able to select between two online schedules e Always on The camera is always online e Always off The camera is never online If these two options are too simple for your needs use the Create Edit button to specify online schedules according to your needs and then select these schedules for your cameras This way you can specify whether cameras should be online within specific periods of time or whether they should start and stop transferring video when specific events occur within specific periods of time The template can help you configure similar properties quickly For example you have 50 cameras and you want a particular online schedule on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply template Lets you select which cameras you want to apply the template for You then use Apply template on selected cameras see description in the following to actually apply the template Tip To select all camer
200. e Auto feature to work as intended it is therefore recommended that you go to step 2 and specify a sensitivity setting that matches your requirements before using the Auto feature 2 Use the two sliders for configuring motion detection Sensitivity Determines how much each pixel must change before it is regarded as motion With a high sensitivity very little change in a pixel is required before it is regarded as motion Areas in which motion is detected are highlighted in green in the preview image Select a slider position in which only detections you consider motion are highlighted As an alternative to using the slider you may specify a value between 0 and 256 in the field next to the slider to control the sensitivity setting Tip If you find the concept of sensitivity difficult to grasp try dragging the slider to its leftmost position The more you drag the slider to the left the more of the preview image becomes highlighted This is because with a high sensitivity even the slightest change in a pixel will be regarded as motion Motion Determines how many pixels must change in the image before it is regarded as motion The selected level is indicated by the black vertical line in the motion level indication bar below the preview image The black vertical line serves as a threshold When detected motion is above that is to the right of the selected sensitivity level the bar changes color from green to red indicating a positive dete
201. e Empty lines are ignored e Even though the CSV file format is generally ASCII only Unicode identifiers are allowed even without Unicode identifiers the entire file or even individual characters are allowed to be Unicode strings If you need to include separator characters in a value for example if a camera name is Reception Camera 1 you can encapsulate the value in quotes to indicate that the separator should not be interpreted as separating values in the file Such quote encapsulated values are interpreted as they appear If a separator a quote or a space is needed in a value the whole value has to be encapsulated in quotes Leading and trailing spaces outside the quote encapsulated value are removed while spaces inside the quote encapsulated value are maintained No characters except spaces are allowed outside the quote encapsulated value A double quote inside a quote encapsulated value is interpreted as a single quote Nested quotes quotes inside quotes are not allowed Some examples using semicolon as the separator e camera is interpreted as camera wm e cam era is interpreted as cam era m e camera is interpreted as camera e sis interpreted as an empty string e u cam era is interpreted as cam era where the character is not part of the interpretation but only used to show the start and end of the interpretation e camera is not valid as there are characters outside the q
202. e PTZ camera will remain at the position where motion was detected for a specified period of time do the following 1 Select the Pause patrolling schedule if motion is detected check box 2 Select whether the PTZ camera should resume patrolling e After a certain number of seconds has passed since first detection of motion regardless whether further motion is detected or e After a certain number of seconds has passed without further detection of motion 3 Specify the required number of seconds for the selected option default is ten and five seconds respectively Unless transition time see the previous information under Wait and Transition Timing is set to zero motion detection is automatically disabled while the camera moves between preset positions as irrelevant motion is otherwise likely to be detected while the camera moves between the preset positions e Resume PTZ patrolling after PTZ patrolling is automatically paused when the camera is operated manually as well as if PTZ on Event is used You can specify how many seconds should pass before the regular patrolling is resumed after a manual or event based interruption Default is 30 seconds Users of the Ocularis Client are in addition to manual control able to stop a selected PTZ camera s patrolling entirely For Ocularis Client users the number of seconds specified in the Patrolling settings section therefore only applies when users manually control a PTZ camera
203. e access to when working with the selected camera Access Camera Example The user group should have access to cameras 2 and 3 Camera 2 note the O Camerat darker background is selected for specification of features Camera2 Tip If the same features should be accessible for several cameras you can select multiple Cameta3 cameras by pressing SHIFT or CTRL on your keyboard while selecting The features are listed in two columns in the lower part of the window the left column lists features related to live viewing the right column lists features related to playback In the Live column the following features all selected by default are available e Live Ability to view live video from the selected camera s o PTZ Ability to use navigation features for PTZ Pan Tilt Zoom cameras A user group will only be able to use this right if having access to one or more PTZ cameras o PTZ Preset Positions Ability to use navigation features for moving a PTZ camera to particular preset positions A user group will only be able to use this right if having access to one or more PTZ cameras with defined preset positions Output Ability to activate output lights sirens door openers etc related to the selected camera s On Net Surveillance Systems Inc 117 RC C User Manual Configuration o Events Ability to use manually trigger events related to the selected camera s o Incoming audio Ability to listen to incoming audio from mi
204. e available for selected cameras only it enables sending of images from immediately before an event took place from the camera to the surveillance system via e mail Pre and post alarm images should not be confused with RC C s own pre and post recording feature RC C Log Check service Performs integrity checks on RC Clog files For more information see Overview of Logs The services by default run transparently in the background on the RC C server If required you are able to start and stop each service separately from the Management Application see Start amp Stop Services Start amp Stop Services On an RC C server four services run in the background by default If required you can start and stop each service separately Is In the Management Application s Navigation pane expand Advanced Configuration and select Services This will display the status of each service You can now stop each service by clicking the Stop button When a service is stopped the button changes to Start allowing you to start the service again when required Tip Occasionally you may want to stop a service and start it again immediately after The Restart button allows you to do just that with a single click On Net Surveillance Systems Inc 84 RC C User Manual System System Configure Default File Paths There are a number of default file paths used Default recording path for new cameras By default all new cameras added will us
205. e background are editable properties on a light blue background cannot be edited Note that the properties Online Period Speedup E mail Notification SMS Notification and PTZ Patrolling can also be specified individually for each camera Template The template can help you configure similar properties quickly For examples you have 50 cameras and you want to change the online schedule profile for all of them Instead of having to select the same 50 times you can simply enter them once in the template and then apply the template to the 50 cameras with only two clicks Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button Camera Name of each camera as it will appear in the Management Application as well as in clients Online Lets you select the required profile for example Always on for the online schedule for the camera s in question ee Tip If you lack a suitable profile use the New schedule profile feature described in the following to configure one This applies for the other schedule types as well Speedup Lets you select the required profile for the soeedup schedule for the camera s in question E mail Lets you select the required profile for the e mail notification schedule for the camera s in question SMS Lets you se
206. e based on the NVR detecting motion in video from a camera based on the NVR s motion detection settings This type of hardware input events is also called system motion detection events or VMD Video Motion Detection events In some NVRs VMD events are an event type of their own with the RC C recording component they are simply considered a type of hardware input event e Manual events Events may be generated manually by users selecting them in their clients These events are called manual events e Generic events Input may also be received in the form of TCP or UDP data packages which can be analyzed by the NVR and if matching specified criteria used to generate events Such events are called generic events e Timer events Timer events are separate events triggered by the hardware input event or manual event or generic event under which they are defined Timer events occur a specified number of seconds or minutes after the event under which they are defined has occurred Timer events may be used for a wide variety of purposes typically for stopping previously triggered actions Examples o A camera starts recording based on a hardware input event for example when a door is opened a timer event stops the recording after 15 seconds o Lights are switched on and a camera starts recording based on a manual event a timer event stops the recording after one minute and another timer event switches the lights off after two minutes e Th
207. e last part of the string In other words RC C will first look for any packages containing either of the terms User001 or Door053 then it will take the results and run through them in order to see which packages also contain the term Sunday Lets you add an end parenthesis character to the Event message expression field AND Lets you add an AND operator to the Event message expression field With an AND operator you specify that the terms on both sides of the AND operator must be present Example If using User001 AND Door053 AND Sunday the term User001 as well as the term Door053 as well as the term Sunday must be present in order for the criterion to be met It is not enough for only one or two of the terms to be present As a rule of thumb the more terms you combine with AND the fewer results you will retrieve User001 Door053 Combinations with AND yields few results indicated in red OR Lets you add an OR operator to the Event message expression field With an OR operator you specify that either one or another term must be present Example If using UserO01 OR Door053 OR Sunday the term User001 or the term Door053 or the term Sunday must be present in order for the criterion to be met The criterion is satisfied even if only one of the terms is present As a rule of thumb the more terms you combine with OR the more results you will retrieve Combinations with OR yields many results indicated in red On Net Surveillance
208. e list click the Select All button Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp Default Microphone Select required default microphone Tip Note that you can select a microphone attached to another hardware device than the selected camera itself This also applies when selecting default speakers Default Speaker Select required default speaker Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera Select All Click button to select all cameras in the Apply Template column On Net Surveillance Systems Inc 116 RC C User Manual Configuration e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Defaut Microphone Microphone 3 Example Only the selected value is applied using this method e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Camera e Enabled Cameras are by default enabled meaning that provided they are scheduled to be online they ar
209. e online only at specific times or events Note however that this default may be changed as part of the general scheduling options in which case subsequently added cameras will not automatically be online The fact that a camera transfers video to the NVR does not necessarily mean that video from the camera is recorded Recording is configured separately see Configure Video amp Recording You specify a camera s online periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in pink papin ay e Events within periods of time example from Event A occurs until Event B occurs Mondays from 08 30 until 17 45 shown in yellow The two options can be combined TEU UL but they cannot overlap in time The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile On Net Surveillance Systems Inc 79 RC C User Manual Scheduling 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names must not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available
210. e protected indicated by a padlock icon in Ocularis Client Lite Denying users the right to create their own views may make sense in some cases for example in order to limit bandwidth use For more information about shared and private views see the separate Ocularis Client User Manual documentation Camera Access In most cases when using Ocularis all users should be given full access to all cameras and devices Restrictions are applied in the Ocularis Administrator application The information provided here is for informational purposes In the list of cameras use the Access column to select which cameras the user groups should have access to Note the last item in the list Rights for new cameras when added to the system with which you can allow the user group access to any future cameras Then for each camera use the Camera column to select the camera and then specify which features the user group should have access to when working with the selected camera Access Camera Example The user group should have access to cameras 2 and 3 Camera 2 note the O Camerat darker background is selected for specification of features Camera Tip If the same features should be accessible for several cameras you can select multiple Camera3 cameras by pressing SHIFT or CTRL on your keyboard while selecting The features are listed in two columns in the lower part of the window the left column lists features related to live viewing the right co
211. e result will be combined with the last part of the string In other words RC C will first look for any packages containing either of the terms User001 or Door053 then it will take the results and run through them in order to see which packages also contain the term Sunday o Lets you add an end parenthesis character to the Event message expression field o AND Lets you add an AND operator to the Event message expression field With an AND operator you specify that the terms on both sides of the AND operator must be present Example If using User001 AND Door053 AND Sunday the term User001 as well as the term Door053 as well as the term Sunday must be present in order for the criterion to be met It is not enough for only one or two of the terms to be present As a rule of thumb the more terms you combine with AND the fewer results you will retrieve On Net Surveillance Systems Inc 55 RC C User Manual Event amp Output Specific Properties Door0 53 Combinations with AND yields few results indicated in red o OR Lets you add an OR operator to the Event message expression field With an OR operator you specify that either one or another term must be present Example If using User001 OR Door053 OR Sunday the term User001 or the term Door053 or the term Sunday must be present in order for the criterion to be met The criterion is satisfied even if only one of the terms is present As a rule of thumb the more terms you combin
212. e running out of disk space just because they have less than 10 disk space left IMPORTANT You will lose data from the archives being deleted On Net Surveillance Systems Inc 176 RC C User Manual Configuration 2 Ultimately if there are no archives to delete RC C will attempt to resize camera databases This will happen if o there is less than 5 disk space left and the available disk space goes below 20 GB plus 1 GB per camera or o the available disk space goes below 75 MB plus 10 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 175 MB 75 MB plus 10 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 5 disk space left IMPORTANT You will lose the data deleted as part of the database resizing process When the recording server is restarted upon such database resizing the original database sizes will be used You should therefore make sure the drive size problem is solved or adjust camera database sizes to reflect the altered drive size Tip Should the database resizing procedure take place you will be informed in log files and if set up through an e mail notification e Backing Up Archives Many organizations want to back up recordings from cameras using tape drives or similar Creating such backup
213. e size of MPEG files Select the check box if you only want to record keyframes Note that you can specify exceptions in the neighboring column e Record All Frames on Allows you to make exceptions if you have selected Record Keyframes Only o Motion Detection Select this to record all frames when motion is detected Two seconds after the last motion is detected the camera will return to recording keyframes only o Event Select this to record all frames when an event occurs and until another event occurs Requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to record all frames when motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns Schedule only Select this to record all frames according to the camera s speedup schedule only e Start Event Select required start event The camera will begin recording all frames when the start event occurs e Stop Event Select required start event The camera will return to only recording keyframes when the stop event occurs e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ prese
214. e the size of the audit log Default is ten seconds On Net Surveillance Systems Inc 69 RC C User Manual Management Application Management Application Apply or Save Configuration Changes Whenever you make changes in the NVR configuration you will be asked to apply them e f you made the changes in one of the Management Application s dialogs you simply apply them by clicking OK e If you made the changes in one of the Management Application s summary tables click the Apply button below the summary table Settings Chinger Apely Owcad Applying a configuration change means that the change is stored by the RC C NVR ina restore point so that you can return to a working configuration if something goes wrong but applying a configuration change does not mean that the changes will take immediate effect on the surveillance system e To actually store your configuration change in RC C s configuration file click the Save Configuration button in the Management Application s toolbar or select File gt Save from the menu Your configuration changes will then take effect the next time RC C s services are restarted e If you want your configuration changes to have immediate effect the NVR s services must be restarted Click the Save Changes and Restart Surveillance Services button in the Management Application s toolbar or select File gt Save Changes and Restart Services from the menu IMPORTANT While services are restar
215. e this path for storing recordings If required you can change individual cameras recording paths as part of their individual configuration but you can also change the default recording path so all new cameras you add will use a path of your choice Default archiving path for new cameras By default all new cameras added will use this path for archiving If required you can change individual cameras archiving paths as part of their individual configuration but you can also change the default recording path so all new cameras you add will use a path of your choice Note that camera specific archiving paths are not relevant if using dynamic path selection for archiving Configuration path The path by default used for storing the RC C system s configuration To change any of the default file paths 1 6 If changing the configuration path stop all services This step is not necessary if changing the default recording or archiving path In the Management Application s menu bar select Application Settings gt Default File Paths You can now overwrite required paths Alternatively click the browse button next to the required field and browse to the required location For the default recording path you are only able to specify a path to a folder on a local drive If using a network drive it would not be possible to save recordings if the network drive became unavailable If you change the default recording or archiving paths
216. e will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field On Net Surveillance Systems Inc 68 RC C User Manual Logging The current day s activity is always logged even with a value of 0 in the field Therefore if you specify 0 you will log current day s activity if you specify 1 you will keep one day plus the current day s activity and so on Event Log e Path Event log files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista To specify another location for your event log files type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder e Days to log A new log file is created for each day on which events occur A log file older than the number of days specified in the field is automatically deleted By default the log file will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field The current day s activity is always logged even with a value of 0 in the field Therefore if you specify 0 you will log current day s activity if you specify 1 you will keep one day plus the current day s activity and so on Audit Log e Enable audit logging Audit logging is the only type of RC C logging which is not compulsory Select clear the
217. e with OR the more results you will retrieve Combinations with OR yields many results indicated in red o Remove Lets you remove the item immediately to the left of a cursor positioned in the Event message expression field If you have not positioned the cursor in the Event message expression field the last item in the field will be removed e Event priority The same data package may be analyzed for different events The ability to assign a priority to each event lets you manage which event should be triggered if a received package matches the criteria for several events The priority must be specified as a number between 0 lowest priority and 1000 highest priority When RC C receives a TCP and or UDP package analysis of the packet will start with analysis for the event with the highest priority This way when a package matches the criteria for several events only the event with the highest priority will be triggered If a package matches the criteria for several events with an identical priority for example two events with a priority of 999 all events with the priority in question will be triggered e Event protocol Lets you select which protocol RC C should listen for in order to detect the event o Any Listen for and analyze packages using TCP as well as UDP protocol O TOP Listen for and analyze packages using TCP protocol only Oo UDP Listen for and analyze packages using UDP protocol only e Event rule type Lets you
218. eaeeseeeaesaeseesaeeeeesaeseeeaeeaeseeseaeeaeseeesaeseeeeaeseeeaeeaeeaes Configure Camera specific Schedules 0 0 2 eee eeseeseeeceeeeeeeeseeeeeseesecsaeeaeesaesaeesaesaesseesaesseeeaecseeaesaeeaeeaesseseeeaeeaeeeaeeaeeees Configure Default File Paths Configure E mail Notifications Configure General Event Handling 00 Configure General Scheduling and Archiving Configure Hardware Devices s es ys Configure Hardware Output ON Event cceeeseeeeseesecseeeseeeeesaeeseeeaesaessaeeaecseeaesaeeeaecaeesaeeaesseesaeeseeseeeaesaeeeeeeaesaeeeaeeaeeees Configure the Management Application Password Protection cccesceeceeseeeeceneeeeceeeeeeceeeeaeeeeeeaeeeseaeeeseaeeaeseeeeaeeaeeaes 182 Configure Master and Slave Servers cccceeeeeeeeeeteees Configure Microphones cceeeee Configure NetCentral Connections Configure NetMatrix eee Configure Server ACCESS wth Configure SMS Mobile Text Notifications ee eececeeseeceeseeeeceseeeeeeaeeseeeeesaeesaeeaeceaesaesseeeaecseesaessesseseaesaeseeeeaesaeeeaeeaeeees Configure Speakers sss scsveectccslepseysvegyck ices eeseideedacshs sects ovidvececenyetesash eg assenebteys pebhecueeedeselecceeaveavsdianiesssiesheve hedoaa Configure System Event and Audit Logging Configure User and Group Rights ae Gontiguire Video amp RECOPING isesi iaia a i a Seb E E a pidever cave evlad bata a EEN Configure When Cameras Should
219. ecipients when e Motion is detected e Events occur you can select individually for each event whether you want to receive an e mail notification or not thus avoiding irrelevant e mails e Archiving fails if e mail notification has been selected as part of the archiving properties Do the following 1 Inthe Management Application s Navigation pane expand Advanced Configuration right click E mail and select Properties 2 You enable the use of e mail alerts separately for the Recording Server service e Enable e Mail Recording Server Enables e mail notifications whenever the Recording Server service is running E mail notifications will then be sent when the following conditions apply o the Recording Server service is running o motion is detected or an event for which the sending of an e mail notification has been defined occurs motion is detected within a period of time for which an e mail notification schedule has been defined 3 Specify required properties including the important information about which SMTP mail server to use When ready click OK Tip You can test your e mail notification configuration by clicking the Test button this will send a test e mail to the specified recipients 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When configuring e mail alerts also consider the e mail notification schedules configured for each camera
220. ecording o Never Never record Live video will be displayed but since no video is kept in the database users will not be able to play back video from the camera o Motion Detection Select this to record video in which motion is detected Unless post recording see the following is used recording will stop immediately after the last motion is detected o Event Select this to record video when an event occurs and until another event occurs Use of recording on event requires that events have been defined and that you select start and stop events in the neighboring columns Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located in the bottom left corner of the window o Motion Detection amp Event Select this to record video in which motion is detected or when an event occurs and until another event occurs Remember to select start and stop events in the neighboring columns e Start Event Use when recording on Event or Motion Detection amp Event Select required start event Recording will begin when the start event occurs or earlier if using pre recording see the following e Stop Event Select required stop event Recording will end when the stop event occurs or later if using post recording see the following e Pre recording You can store recordings from periods preceding detected motion and or start events Select check box to enable this feature R
221. ection Use if a particular event should cause video to stop being displayed in the NetMatrix recipient even if they are not yet old enough to be pushed out of the NetMatrix recipient If you selected Connect another red exclamation mark will indicate that there is still some configuration to be done Right clicking an action lets you select which camera to apply the action on GD Ale Cortial Display Moton on Back Doce West Wing Camera b Comet Delete Connect Back Door East Wing Camera Back Ooor West Wing Camera b Executive Office Cam Camera 1 In this example we have specified that when motion is detected on Camera b the selected NetMatrix recipient should connect to Camera b BD Alam Cental Dapay amp Motion on Back Dox Wert Wing Camera b Pp Cornect Doo Wert Corresta bi NetMatrix Recipients The NetMatrix Recipients tab is used for enabling NetMatrix functionality and for defining on which computers to display NetMatrix triggered live video A computer on which NetMatrix triggered video can be displayed is known as a NetMatrix recipient Being able to view NetMatrix triggered video requires that either an Ocularis Client or the dedicated NetMatrix Monitor software is installed on the user s computer e Enable matrix Select check box to enable NetMatrix functionality e List of Defined NetMatrix recipients Lists any already defined NetMatrix recipients that is computers on which NetMatrix trig
222. ed for later replacement Why are GUIDs marked for replacement GUIDs are marked for later replacement because they refer to specific components cameras etc Even though you wish to use the cloned configuration for setting up a new similar system using similar types of cameras the new system will not use the exact same physical cameras as the cloned system When the cloned configuration is later used in a new system the GUIDs will therefore be replaced with GUIDs representing the specific components of the new system After GUIDs have been marked for replacement the configuration files will be combined into one single file which can then be saved at a location specified by you Note that if there are unsaved changes to your configuration they will automatically be saved when you export the configuration 1 In the Management Application s File menu select Export Configuration Clone 2 Browse to the location at which you want to store the exported configuration specify a suitable file name and click Save e Import Previously Exported Configuration The same import method is used regardless of whether the configuration was exported as a backup or a clone 1 In the Management Application s File menu select Import Configuration 2 Browse to the location from which you want to import the configuration select the required configuration file and click Open 3 Only relevant if the system into which you import the configuration contains
223. ed user is of the type basic user Lets you edit the password Remember to repeat the password to be sure you have specified it correctly e User type Non editable field displaying whether the selected user is of the type basic user or Windows user Group Information e Group name Lets you edit the group name Group names must be unique and must not contain the following characters lt gt amp On Net Surveillance Systems Inc 98 RC C User Manual Users General Access When adding or editing basic users Windows users or groups the following defines the general access settings In most cases these settings should be set for full access when using Ocularis e Live Ability to view Live video in the Ocularis Client or Ocularis Client Lite e Playback Ability to view video in Browse mode in the Ocularis Client or Ocularis Client Lite e Setup Ability to view the Setup tab in Ocularis Client Lite e Edit shared views Ability to create and edit views in shared groups in Ocularis Client Lite Views placed in shared groups can be accessed by every user If a user group does not have this right shared groups will be protected indicated by a padlock icon in Ocularis Client Lite e Edit private views Ability to create and edit views in private groups in Ocularis Client Lite Views placed in private groups can only be accessed by the user who created them If a user group does not have this right private groups will b
224. educe the size of the audit log Default is 60 seconds In sequence timespan Number of seconds to pass for viewed images to be considered to be within the same sequence Specifying a high number of seconds may help limit the number of viewed sequences logged and thus reduce the size of the audit log Default is ten seconds On Net Surveillance Systems Inc 129 RC C User Manual Configuration Manual Event e List of defined global events and cameras Contains a Global node and a list of all defined cameras You can configure as many manual events as required no matter whether they are global or camera specific A sign next to the Global node indicates that one or more global manual events have already been configured A sign next to a camera indicates that one or more manual events have already been configured for that camera e Event name Specify a name for the event this is the name that client users will see Manual event names must be unique and must not contain the following characters lt gt amp Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details e Send e mail if this event occurs Only available if e mail notification is enabled Select if the RC C recorder should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notification
225. eeaecaeeaecaeseeesaeseeesaeeseseaesaeseaeeeesnesaeesaesaeeeeesaeeeeesaeeeeeeeeereeaeeaes 12 Configuration amp Properties 13 Archiving Extends Recording Storage issia naien dae aea enai denean abaa eieae ae aa daadaa 13 Storing Archives at Other Locations than the Default Archiving Directory seesessscserssrssrrerrrrerrrrrrrrrrrrrrren 14 Dynamic Path Selection TOPArChives se aienasasescha lander denied a E aiae EE Ea EAE aE EEA 14 ALCRIVING AUCIO ossiani gone a a a a NSun linea ey soe nul obo o ana i a e a a a En 14 Different Drives Automatic Archiving if Database Drive Runs Out of Disk Space 15 Same Drive Automatic Moving or Deletion of Archives if Running Out of Disk Space scce 15 Archives Stored Locally or on Network DYive S cccccec eee ene na ene na Ea 17 Exp rted AICIIVES cists eu eats Maite ue ctiutiin ate tea EE EEEE eeu ele a ede wilde wee eee wale walla cv e n Eea EGA 17 Configure Archiving LOCations c ccceceeseeeeeeeeeseeeeeeeeseeeeeeeeaeeeeeaeseeeeaeeneeeaeeeeeeaeeaee itinerant Gi iaahns acs 18 Configure Archiving Schedules 1 20 iii nou Se ee Fn avatars ce aac dca tec ett davai a e aeai Audio 00005 Add Audio Sources Add Audio Sources Configure Microphones az iiaisccceccycect vase cea ceecedens fa deedcceedeye gp sedeangotteeey Sodeaci Heater de dectevi Ado ceecevdelewetibeeavessesneddsessdetenn este Configure Speakers aissi asen au ipee a eden tated nite daian seen ada ead erdade i r
226. eeeeeee AE O Ghicetii hares litany Cameras and Server Are ONIine eiee ccc een EE e nets Ce eee Camera and Server Are Offline ke vschsarivovdansivaad vashsw a a a A Optional Parameterseickiescacasaccircndadadarndadahadadncadaahadndadahaiann A A E A AE ARARA Replace Hardware Device Wizard Properties Name amp Video Channels Network Device Type amp Licensen cicsccciecccecdessvcasecndtevsscesescvcaressdepssteestcevebrepsdesvecueecevenpeatdonvenestesetvseneatenveatdontenesteesterscats PA Z DOVICG occ E AE Sy ccch ea ES ce eee gassed Sas Spa chau ce A dee Meese vues ten ietey ehetveinge eee LIC NS CS isitcceiesestec cece teeta Import DLKs Device License Keys Specify a New SLC Software License Code c ccccccecceceseceneceeceeeeeeceeeeeeeeceeeeaeeceaeeeseeeeeeseaeecaeeeaeeseeeeaeseaeeseeeseaeeeeeeeee Ocula ris BASES SEG sawsaaeiwoobaen ces anae iaaa aa aaia a ie aaa va lala dilate i aa E E a Ea Ea i a ia aa Ea aia E ai a EES 66 Recording Component RC C SECiksrissnseno nane oi o E a ea ala aaae a a E a E AE Aa a AE A ale ala lala E Ala a Aa E eels a 66 Eeee Ne E N EE E E A E A P TN Overview of Logs Configure System Event and Audit Logging ceceeeeeceeseeeeeeseeneeeeeesesenecaeseeeaeeaeeeaeeaeeaeecaeseeesaeseeeaeeaeeneesaeseeseaeseeeeeeaees 68 On Net Surveillance Systems Inc iv RC C User Manual Table of Contents Properties LOGS innein a e N a a a a a aeaa a aae eaa e aa i veyveveata
227. egarding the camera e If the camera is a PTZ camera able to patrol when it should patrol and according to which patrolling profile Do the following 1 In the Management Application s navigation pane expand Advanced Configuration expand Scheduling and Archiving right click the required camera and select Properties 2 Specify properties as required for Online Period Soeedup E mail Notification SMS Notification and if dealing with a PTZ camera capable of patrolling PTZ Patrolling When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Default File Paths There are a number of default file paths used e Default recording path for new cameras By default all new cameras added will use this path for storing recordings If required you can change individual cameras recording paths as part of their individual configuration but you can also change the default recording path so all new cameras you add will use a path of your choice e Default archiving path for new cameras By default all new cameras added will use this path for archiving If required you can change individual cameras archiving paths as part of their individual configuration but you can also change the default recording path so all new cameras you add will use a path of your choice Note that camera specific archiving paths are not relevant if using dynamic path selecti
228. eginning of a log file Configure System Event and Audit Logging Various logs are generated by the NVR To configure logging do the following 1 In the Management Application s Navigation pane expand Advanced Configuration right click Logs and select Properties 2 Specify required properties for e General system logs Management Application log Recording Server service log Image Server service log Image Import service log e The event log e The audit log Note that only audit logging can be disabled enabled by administrators all other logs are compulsory When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Properties Logs Logs that is Management Application log Recording Server service log Image Server service log Image Import service log e Path These system log files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSI Recorders RC C if running Windows Vista To specify another location for your log files type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder e Days to log A new log file is created each day the Management Application and or the services are used A log file older than the number of days specified in the field is automatically deleted By default the log fil
229. eillance Systems Inc 122 RC C User Manual Configuration Frame Rate MPEG All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Frame Rate MPEG properties can also be specified individually for each camera using MPEG Template The template can help you configure similar properties quickly For example you have 50 cameras and you want a particular frame rate on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp 2 e Live FPS Lets you select the camera s live frame rate per second FPS e Record Keyframe Only Keyframes stored at specified intervals record the entire view of the camera whereas the following frames record only pixels that change this helps greatly reduce th
230. eillance server where they are presented with a welcome page From the welcome page users may download the Ocularis Client software and install it on their computers e Various plugins Downloading such plugins can be relevant for users if your organization uses add on products with the RC C solution e What Does the Welcome Page Look Like The welcome page is a simple web page with links to downloading or running various features It is available in a number of languages users select their required language from a menu in the top right corner of the welcome page To view the welcome page simply open an Internet Explorer browser version 6 0 or later and connect to the following address http surveillance server IP address or hostname If the Image Server service has been configured with a port number other than the default port 80 you configure this as part of the server access properties users must specify the port number as well separated from the IP address or hostname by a colon http surveillance server IP address or hostname port number The content of the welcome page is managed through the NVR Download Manager therefore the welcome page will often look different in different organizations Initial Look The initial look of the welcome page is automatically provided through the NVR Download Manager s default configuration for more information see Default Configuration of Download Manager e Default Conf
231. elease notes to verify that input controlled operation is supported for the hardware device and firmware used To add and or configure a hardware input event do the following 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Hardware Input Events and select Enable New Input Event 2 Inthe Hardware Input Event Properties window s list of hardware devices expand the required hardware device to see a list of pre defined hardware input 3 Select the required types of input to use them as events The types of input often vary from camera to camera If motion detection is enabled in the NVR for the camera in question note the input type System Motion Detection which lets you turn detected motion in the camera s video stream into an event Note that some types of input are mutually exclusive When you select one type of input you may therefore note that other types of input become unavailable for selection 4 For each selected type of input select required properties When ready click OK or click the Add button to add a timer event to the event you have just created 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add a Manual Event With manual events your users with required rights can trigger events manually from their clients Manual events can be global shared by all cameras or tied to
232. elect Properties 3 Specify properties as required for Camera Frame Rate Video Audio Recording Recording amp Archiving Paths Event Notification Output Motion Detection amp Exclude Regions and if applicable PTZ Preset Positions PTZ Patrolling and PTZ on Event 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure When Cameras Should Do What Use the scheduling feature to configure when e Cameras should be online that is transfer video to the NVR On Net Surveillance Systems Inc 186 RC C User Manual Configuration e Cameras should use speedup i e use a higher than normal frame rate e You want to receive any e mail and or SMS notifications regarding cameras e PTZ cameras should patrol and according to which patrolling profile e Archiving should take place See Configure General Scheduling amp Archiving and Configure Camera specific Schedules Database Resizing In case the recordings for a camera get bigger than expected or the available drive space is suddenly reduced in another way an advanced database resizing procedure will automatically take place If archives are present on the same drive as the camera s database the oldest archive for all cameras archived on that drive will be moved to another drive moving archives is only possible if you use dynamic archiving with which you can archive to several different
233. elect which camera you want to receive pre and or post alarm images from e Number of pre alarm images Only relevant if using pre alarm images a feature available for selected cameras only Specify required number of pre alarm images Allowed number may differ from camera to camera allowed range is displayed to the right of the field e Frames per second Only relevant if using pre alarm images a feature available for selected cameras only Specify required frame rate Used in combination with the Number of pre alarm images field this field indirectly allows you to control how long before the event you want to receive pre alarm images from e Send e mail if this event occurs Only available if e mail notification is enabled Select this if the NVR should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notifications also keep in mind individual cameras scheduling e Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box e Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select if the NVR should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notification co
234. ember you can change names manually by overwriting all or parts of them in the Name column If you change camera names manually remember that camera names must be unique and must not contain any of the following special characters lt gt amp When ready click Finish Exclude regions let you disable motion detection in specific areas of cameras views Disabling motion detection in certain areas may help you avoid detection of irrelevant motion for example if a camera covers an area where a tree is swaying in the wind or where cars regularly pass by in the background Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application For each camera for which exclude regions are relevant use the list in the left side of the wizard window to select the camera and define its exclude regions Exclude regions are camera specific and must therefore be configured individually for each camera on which they are required When you have selected a camera do the following to define its exclude regions 1 Select the Enable check box You will see a preview from the camera You define exclude regions in the preview which is divided into small sections by a
235. emember to specify required number of seconds in the neighboring column How does pre and post recording work The NVR receives video in a continuous stream from the camera whenever the camera is enabled and scheduled to be online This is what lets you view live video but it also means that the NVR can easily store received video for a number of seconds in its memory a k a buffering If it turns out that the buffered video is needed for pre or post recording it is automatically appended to the recording If not it is simply discarded e Seconds of pre recording Specify the number of seconds for which you want to record video from before recording start conditions that is motion or start event are met Usually only some seconds of pre recording is required but you can specify up to 65535 seconds of pre recording corresponding to 18 hours 12 minutes and 15 seconds However if specifying a very long pre recording time you can potentially run into a scenario where your pre recording time spans scheduled or unscheduled archiving times That can be problematic since pre recording does not work well during archiving e _ Post recording You can store recordings from periods following detected motion and or stop events Select check box to enable this feature Remember to specify required number of seconds in the neighboring column e Seconds of post recording Specify the number of seconds for which you want to record video from after re
236. ention time covers the total amount of time you want to keep recordings e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply one or more selected values from the template rather than all values to selected cameras e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Recording Settings The term recording means saving video and if applicable audio from a camera in the camera s database on the surveillance system server Video audio is often saved only when there is a reason to do so for example as long as motion is detected when an event occurs and until another event occurs or within a certain period of time When you configure video and recording for specific cameras recording properties include e Always Record whenever the camera is enabled and scheduled to be online the latter allows for time based recording e Never Never record Live video will be displayed but since no video is kept in the database users will not be able to play back video from the camera e Conditionally Record when certain conditions are met Whe
237. er Simply type the IP address in the Address field when adding the slave server Remember that if on a local network the oca IP address of the slave server must be used Before you start using your master slave setup remember to verify that e Required users have be defined on the master server as well as on each of the slave servers e Public Access has been enabled on all involved servers and ports mapped accordingly in the routers or firewalls used if the slave servers are to be accessed from the internet When using a master slave setup remote users and their rights must be defined in the Management Application s Users section on the master server as well as on each of the slave servers Only cameras to which a remote user has been given access will be visible to the user regardless of whether the cameras are connected to the master server or to one of the slave servers If they are to be accessed from the internet Public Access must be enabled on all involved servers and ports must be mapped accordingly in the routers and or firewalls used On Net Surveillance Systems Inc 182 RC C User Manual Configuration Not Using a Master Slave Setup If you do not wish to use a master slave setup for example because there is only a single NVR server on your system simply do not specify anything in the Master Slave Setup section Frequently Asked Questions About Using Master Slave How many master servers can use in a master slave s
238. er both local and mapped drives You can add further paths with the New path feature below the list e Use Lets you select particular paths for use as dynamic archiving paths Also lets you select a previously manually added path for removal see description of Remove button in the following e Drive Indicates which drive the path belongs on e Path Path to use as dynamic archiving path e Drive Size Total amount of space on the drive that is free space as well as used space e Free Space Amount of free space available on the drive in question e New path Lets you specify a new path and add it to the list using the Add button Paths must be reachable by the surveillance system server and you must specify the path using the UNC Universal Naming Convention format example server volume directory When the new path is added you can select it for use as a dynamic archiving path e Add Lets you add the path specified in the New path field to the list e Remove Lets you remove a selected path which has previously been manually added from the list You cannot remove any of the initially listed paths not even when they are selected Video Recording The term recording means saving video and if applicable audio from a camera in the camera s database on the surveillance system server Video audio is often saved only when there is a reason to do so for example as long as motion is detected when an event occurs and until anothe
239. era 1 ea Test 1 Camera Resolution The resolution of the camera e FPS The number of frames per second a k a frame rate currently used by the camera The number updates each time the camera has received 50 frames e Frame count The number of frames received from the camera since the Recording Server service was last started e Received KB The number of kilobytes sent the by camera since the Recording Server service was last started e Offline Indicates the number of times the camera has been offline due to an error e View the Recording Server Service Log File 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Open Recording Server Log File For more information about log files see Configure Audit Event amp System Logging e View the Image Server Service Log File 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Open Image Server Log File For more information about log files see Configure Audit Event amp System Logging e Access the Built in Help System 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Help For more information see Use the Built in Help System e View Version Information Knowing the exact version number can be useful in case you require support from OnSSI 1 Right click the notification area s Recording Server
240. erver service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application e Patrolling Profiles A PTZ camera may patrol according to several different patrolling profiles For example a PTZ camera ina supermarket may patrol according to one patrolling profile during opening hours and according to another patrolling profile when the supermarket is closed The Patrolling profiles list lets you select which patrolling profile to configure e Add New Lets you add a new patrolling profile to the list When you add a new patrolling profile you can either give it a unique name or reuse an existing name from another PTZ camera with PTZ patrolling Using several identically named patrolling profiles can be advantageous when you later configure scheduling Example If you have configured patrolling profiles identically named Night Patrolling on 25 different cameras you can schedule the use of Night Patrolling on all 25 cameras in one step even though Night Patrolling covers individual preset positions on each of the 25 cameras e Delete Lets you delete an existing patrolling profile Note that the selected patrolling profile will be removed from the list without further warning There are already some patrolling profiles listed why Names of patrolling profile defined for other cameras can be reused This allows you to use a single patrolling profile name across several PTZ cameras
241. es respectively then clicking the up and down buttons to increase or decrease values Alternatively you can simply overwrite selected hour minute or second values 2 Click the Add button e Archive Failure Notification You can automatically get notified if archiving fails e Send e mail on archiving failure If selected e mails to selected recipients will automatically be sent if archiving fails This requires that the e mail notification feature is enabled Recipients are defined as part of the e mail notification properties e Send SMS on archiving failure If selected an SMS mobile phone text message will automatically be sent to selected recipients if archiving fails This requires that the SMS notification feature is enabled Recipients are defined as part of the SMS notification properties E mail and SMS notifications are normally only sent during scheduled periods However archiving failures are considered to be so serious that if enabled e mail and SMS notifications regarding archiving failures are sent regardless of schedules Camera specific Scheduling Properties Online Period When you configure scheduling for specific cameras your Online Period settings are probably the most important since they determine when each camera should transfer video to the NVR By default cameras added to the RC C NVR will automatically be online and you will only need to modify the online period settings if you require cameras to b
242. ess HardwareUsername HardwarePassword Ha 192 168 200 220 AdminAccountUserName tOp5ecR3tpas 192 168 200 221 AdminaccountUser Name TOPsecrertPA 013 168 200 222 RootaccountUserName TOPSECRETpAS 19 168 200 553 adminac ountuserNname TOPS3cr Whichever method is used the following applies e The first line of the CSV file must contain the headers and subsequent lines must contain information about one hardware device each e Separators can be commas semicolons or tabs but cannot be mixed e All lines must contain valid values pay special attention to the fact that camera names user names etc must be unique and must not contain any of the following special characters lt gt amp IT e There is no fixed order of values and optional parameters can be omitted entirely e Boolean fields are considered true unless set to 0 false or no e Lines containing only separators are ignored e Empty lines are ignored e Even though the CSV file format is generally ASCII only Unicode identifiers are allowed even without Unicode identifiers the entire file or even individual characters are allowed to be Unicode strings If you need to include separator characters in a value for example if a camera name is Reception Camera 1 you can encapsulate the value in quotes to indicate that the separator should not be interpreted as separating values in the file Such quote encapsulated values are interpreted as they a
243. essary for RC C to regularly check the state of the hardware devices input ports in order to detect input Such state checking at regular intervals is called polling You can specify in tenths of a second the interval between state checks Default value is 10 tenths of a second that is one second For dedicated input output devices it is highly recommended that the polling frequency is set to the lowest possible value one tenth of a second between state checks For information about which hardware devices require polling see the release note PTZ Device The PTZ Device tab is only available if configuring video encoder hardware devices on which the use of PTZ Pan Tilt Zoom cameras is possible e Connected cameras have Pan tilt Zoom capabilities Select check box if any of the cameras attached to the video encoder device is a PTZ camera e PTZ type on COM f a PTZ camera is controlled through the COM port a k a serial port in question select the required option Options are device specific depending on which PTZ protocols are used by the device in question If no PTZ cameras are controlled through the COM port in question select None Some of the options concern absolute and relative positioning What is that Absolute positioning is when the PTZ camera is controlled based on a single fixed position against which all other positions are measured Relative positioning is when the PTZ camera is controlled relative to its current positi
244. etsecreqsahtatesies cnstteeticnts ccaseteaninnasdslee Event amp Output Specific Properties Hardware Input Eventi cvicciccveneet irents iia edari a dati eaea aaaea EYE aaea Setai 54 Marital AVE A EAE EE E E E E E E Generic Event Timer Event Hardware Qutput iain rea eieaa Ea AA AEE EE SE AAN AAEE AE AAE A E E AAE ESE A AE a aaae 57 Hardware Devic Sisia irana aieea naaa aaar Aaea oi seca sacdhdedocs inert AE SaLe raa AOAN Taaa ANR 58 Add Hardware Devices Configure Hardware DeVICES csasiiirasie ipnr idsi titi aaie aa did E deb ovina ediderat daa daudi 58 Use Dedicated Input Output Devices 0 ee eee eeeecesseeeeeeseeeeeeseeseeseessecseeeaecseesaecseeeaesaecsaesaecaesaesaeeeeessesaeeeaeeaeeeeseateeeeateas 58 Replace Hardware Devices Delete Hardware DeVICES ccccceceeeeeeeeeeeeeeeeeeeeeaeeeeeeaaeeesaaeeeeeaaeeeeaeeeseaaeeeecaaeeesaeeeseaeeeseaeesseaeeesseaeeeseeeesseaeeeseneeeeneaee Add Hardware Devices Wizard Express Method ccccecesceceeeeeeeeeneeeeseaeeeeeeeeeeeaeeeseaaeeeseaaeeseeaeeeseaeeseeaeeeseneeeeeeaeeeees 60 Add Hardware Devices Wizard Advanced Method cccescceeeeeeeeeeeeeeeeeeeeeeeeaeeeseaeeeeeaeeeeeeaeeeseaeeeeseaeeseeaeeeseneeeeeeeeetes 60 Add Hardware Devices Wizard Manual Method ccccceeeeeeeceneeeeeeeeeeeeaeeeeeeeeeeseaaeeeeeaeeeseaaeeeseaeeeseaeeesenaeeeseneeeseeeeeees 60 Add Hardware Devices Wizard Import from CSV File Method c eeeeceesee
245. etup An unlimited number of servers per SLC Software License Code specified during installation can be designated as master servers If required for example if your organization is very large and spread over many geographical locations or in case you want to create a redundancy solution this allows you to use several master servers in a master slave setup How many slave servers can use in a master slave setup An unlimited number of servers can be defined as slave servers under a designated master server using the same Software License Code How do I switch around which server is master and which server is slave If you want a slave server to become a master server simply clear Enable as master server on the original master server and click OK In the Management Application s navigation pane right click the slave server which you want to become master server and select Properties Then select Enable as master server Next click Add to add slave servers to the new master server Do I need a master slave setup with Ocularis No The master slave setup is not necessary when using Ocularis but it is supported when working in a legacy environment Configure Microphones Configuration of microphones is very basic settings such as volume etc are controlled on the microphone units themselves 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device to whic
246. event notification is used for a camera the yellow indicator will light up when a relevant event has occurred e Ared recording indicator lights up when recording is taking place e Ablue Ml motion indicator lights up when motion is occurring on the camera feed e How to Select Required Events 1 In the Available events list select the required event It is only possible to select one event at a time Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields 2 Click the gt gt button to copy the selected event to the Selected Events list 3 Repeat for each required event If you later want to remove an event from the Selected Events list simply select the event in question and click the lt lt button Frame Rate MJPEG All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Frame Rate MJPEG properties can also be specified individually for each camera using MJPEG e Template and Common Properties e Template The template can help you configure similar properties quickly For example you have 50 cameras and you want a particular frame rate on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template
247. ewing live video from a camera which is not already recording If enabled manual recording can thus take place even if recording for individual cameras is set to Never or Conditionally When started from the Ocularis Client such user driven recording will always take place for a fixed time for example for five minutes e Enable manual recording Select check box to enable manual recording and specify further details e Default duration of manual recording Period of time in seconds during which user driven recording will take place Default duration is 300 seconds corresponding to five minutes e Maximum duration of manual recording Maximum allowed period of time for user driven recording This maximum is not relevant in connection with manual recording started from the Ocularis Client since such manual recording will always take place for a fixed time In some installations it is however also possible to combine manual recording with third party applications if integrating these with the NVR through an API or similar and in such cases specifying a maximum duration may be relevant If you are simply using manual recording in connection with the Ocularis Client disregard this property Frame Rate MJPEG All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Frame Rate MJPEG properties can also be specified individually for each camera using MJPEG e Template
248. existing recordings at the old location you will be asked whether you want to move the recordings to the new location recommended leave them at the old location or delete them Tip If you have several cameras and several local drives are available you can improve performance by distributing individual cameras databases across several drives e Delete Database Click button to delete all recordings in the database for the camera Archived recordings will not be affected IMPORTANT Use with caution all recordings in the database for the camera will be permanently deleted As a security measure you will be asked to confirm the deletion e Archiving path Only available if not using dynamic paths for archiving Path to the folder in which the camera s archived recordings should be stored Default is C VideoData Archives To browse for another folder click the browse button next to the Archiving path field You can specify a path to local or networked drive as required You can only specify a path to local drive If you change the archiving path and there are existing archived recordings at the old location you will be asked whether you want to move the archived recordings to the new location recommended leave them at the old location or delete them Note that if moving archived recordings RC C will also archive what is currently in the camera s database in case you wonder why the camera database is empty just after you have moved arch
249. ey are automatically added as well When managing microphones and speakers it is important to remember the basic concepts e Microphones are attached to hardware devices and are typically physically located next to cameras They generally record what people near a camera are saying Operators with the necessary rights can then listen to these recordings through their Ocularis Client provided the computer running the Ocularis Client has speakers attached It is only possible to have one microphone enabled at a time e Speakers are also attached to devices and also typically physically located next to cameras They can transmit information to people near a camera Operators with the necessary rights can talk through such speakers using their Ocularis Client provided the computer running the Ocularis Client has a microphone attached Example An elevator is stuck Through a camera mounted in the elevator Ocularis Client operators can see that there is a person in the elevator A microphone attached to the camera records that the person says The elevator is stuck please help me out Through a speaker attached to the camera operators can tell the person that Help is on its way you should be out in less than fifteen minutes When managing microphones and speakers in RC C you manage the microphones and speakers attached to cameras not microphones and speakers attached to Ocularis Client operators computers Add Audio S
250. f the group s future members 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 7 Now you can add users to the group In the navigation pane right click the group you just created and Add Basic Users or Add Windows Users as required Configure User and Group Rights User group rights are configured during the process of adding users groups see Add Basic Users Add Windows Users and Add User Groups Note that you can also add basic and Windows users through the Configure User Access wizard However when using the wizard all users you add will have access all to cameras including any new cameras added at a later stage If you at a later stage want to edit the rights of a user or group 1 In the Management Application s navigation pane expand Advanced Configuration expand Users right click the required user or group and select Properties 2 Edit General Access and Camera Access properties These properties will determine the rights of the user group 3 Click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar User Information e User name Only editable if the selected user is of the type basic user Lets you edit the user name User names must be unique and must not contain the following characters lt gt amp e Password Only editable if the select
251. f using this option highly recommended you should select a number of different drives for archiving If the path containing the database is on one of the drives you have selected for archiving will always try to archive to that drive first If not automatically archives to the archiving drive with the most available space at any time Which drive that is may change during the archiving process and archiving may therefore happen to several archiving drives during the same process This fact will have no impact on how users find and view archived recordings e Network Drive Lets you add a network drive to the list of drives First specify the network drive then click the Add button the button becomes available when you specify a network drive Note that network drives cannot be used for recording only for archiving e Archiving schedule Lets you specify when you want to automatically move recordings to your archiving path s You can specify up to 24 archiving times per day with minimum one hour between each one As a rule of thumb the more you expect to record the more often you should archive Specify when each camera should be online An online camera is a camera that transfers video to the server for live viewing and further processing The fact that a camera is online will not in itself mean that video from the camera is recorded recording settings are configured on one of the wizard s next pages All properties on a white background ar
252. figure scheduling for PTZ Pan Tilt Zoom cameras capable of patrolling you can specify which patrolling profiles to use at specific times Before you can define this type of schedule patrolling must be configured for the cameras in question Patrolling schedule profiles are based on use of particular patrolling profiles within particular periods of time example Mondays from 08 30 until 17 45 shown in red On Net Surveillance Systems Inc 140 RC C User Manual Configuration Use of one patrolling profile may be followed immediately by use of another example use the Daytime patrolling profile Mondays from 08 30 until 17 45 then the Evening patrolling profile Mondays from 17 45 until 23 00 Use of two patrolling profiles cannot overlap Unlike other types of scheduling there are no ready made Always on and Always off schedule profiles for PTZ patrolling You can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 In the field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the Patrolling profile list below the calendar section select the required patrollin
253. files A PTZ camera may patrol according to several different patrolling profiles For example a PTZ camera in a supermarket may patrol according to one patrolling profile during opening hours and according to another patrolling profile when the supermarket is closed The Patrolling profiles list lets you select which patrolling profile to configure e Add New Lets you add a new patrolling profile to the list When you add a new patrolling profile you can either give it a unique name or reuse an existing name from another PTZ camera with PTZ patrolling Using several identically named patrolling profiles can be advantageous when you later configure scheduling Example If you have configured patrolling profiles identically named Night Patrolling on 25 different cameras you can schedule the use of Night Patrolling on all 25 cameras in one step even though Night Patrolling covers individual preset positions on each of the 25 cameras e Delete Lets you delete an existing patrolling profile Note that the selected patrolling profile will be removed from the list without further warning There are already some patrolling profiles listed why Names of patrolling profile defined for other cameras can be reused This allows you to use a single patrolling profile name across several PTZ cameras and this can make scheduling of PTZ patrolling much easier Despite the fact that several PTZ cameras share a patrolling profile name the movement between p
254. g locations for separate cameras you could simply back up the default local archiving directory Archives When scheduling a backup make sure the backup job does not overlap with any scheduled archiving times e Viewing Archived Recordings Archived recordings may be viewed with the Ocularis Client You are able to use all of Ocularis Client s advanced features video browsing searching export etc for archived recordings as well Archives Stored Locally or on Network Drives For archived recordings stored locally or on network drives you simply use the Ocularis Client s playback features for example the Kinetic Timeline browser for finding and viewing the required recordings just like you would with recordings stored in a camera s regular database Exported Archives For exported archives for example archives stored on a CD you may also use the Ocularis Client e Virus Scanning and Archiving If allowed in your organization disable any virus scanning of camera databases and archiving locations For more information see Virus Scanning Information e New Database if Archiving Fails Under extremely rare circumstances archiving may fail For example a database may be full and ready for archiving but the operating system may lock content in the database if a content file is open This would prevent archiving In practice this situation would only occur if somebody attempted to view a database file directly from the database fol
255. g profile 4 Inthe calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 ising e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message 5 Repeat steps 3 4 if you want to use several patrolling profiles within the same schedule profile If use of one patrolling profile is followed immediately by use of another run your mouse pointer over the red bar to see which patrolling profile applies when 06 00 08 00 10 00 1200 14 00 1600 1800 HL DEAL My patrol scheme ju PTZ Preset Positions PTZ related properties are only available when you are de
256. gered video can be displayed To change the properties of an already defined NetMatrix recipient select the required NetMatrix recipient make the changes in the fields below the list then click the Update button To remove a NetMatrix recipient from the list select the unwanted NetMatrix recipient then click the Delete button e Delete Available only when you have selected a NetMatrix recipient in the list Clicking the Delete button will remove the selected NetMatrix recipient You will be prompted to confirm the removal e Name Name for the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one The name will appear in various day to day usage situations it is therefore a good idea to use a descriptive and unambiguous name NetMatrix recipient names must not contain the following characters lt gt amp On Net Surveillance Systems Inc 134 RC C User Manual Configuration Address P address of the NetMatrix recipient used when adding a new NetMatrix recipient or editing the properties of an existing one Port Lets you specify the port number to be used when sending commands to the NetMatrix recipient Used when adding a new NetMatrix recipient or editing the properties of an existing one The NetMatrix recipient will listen for commands on this port By default port 12345 is used you can of course specify another port number Password Lets you specify the p
257. gs from the special temporary database Normally the content of databases can be viewed with the Ocularis Client regardless whether the databases have been archived or not However the content of the special temporary database cannot be viewed through a client until the content has been archived On the surveillance server itself you will be able to view the content of the special temporary database through the Ocularis Client even if the special temporary database has not been archived yet Since the special temporary database will be used for storing new recordings until the Recording Server service is restarted even though the original database may no longer be locked you may in these extremely rare situations experience that new recordings are not viewable through clients In that case restarting the Recording Server service will help since it will force the original database to again be used for storing new recordings Change or Reset the Management Application Behavior You can change the way the Management Application behaves For example the Management Application will ask you to confirm many of your actions by default If you find this annoying you can change the Management Application s behavior so it will not ask you again 1 In the Management Application s menu bar select Application Settings gt Application Behavior 2 For each action you can now select how the Management Application should behave Examples e When you
258. guration from a Restore Point ccccccecececeeceeeeeeeeeeeeeeeeeeeeceeeeeeaeseaeeceaeeeaeecaeseaessaeeseaeeeeeseaeenaees 86 Export amp Import System Configuration krss 4 08 aniaide tec earl Hii ee oie eater Ae 86 Import Changes to Configuration ceceeccecseceeececeeeeeeeeeaeceeeeseeseceeesaeseeesaeeeesaesseseaesaeseeesaesaeeeaesaesaeeeaesaeeeaeeaeeneesaeeneeeaeeate 87 Daylight SAVINGS Tite 2 cceeceseeeeeeeeeeeeee eee eeeeeeeeee sees nunnur nunnu nunn nnnn nnman nunen nanne nanenane 91 Spring Switch from Standard Time to DST sssssssssssssssssseressrrrsrrrrsrrrrsrrrnsrrrnsrrrnsrrrnsrrrnsrrrnnrinnnrr rnnt 91 Fall Switch from DST to Standard Time 0 1 0cccc cece eee renee nent nena eneas 91 Stability MproveMent 2 2cc cccccccscecctecesecssdeestedeeedstnesececececcnecane cgsecnatedeaenancessceraeedseceenedeseetanes 92 Adding ths GB SWHCH viii tisovine driesen a aaiae daed rose Obeid be o adi a iv me ded ii e aaa 92 Removing tha 3 GB Swi a ee eirean ee ien an e aT vadve suai o N EnS aSa Er Eer PEET oaa A aeS Daai 93 Adding theg GB SWAG ise cleus a ove lua a a Dae Ta aTa VED DEAS ENTEN wee vee vue ee dee eee TUNES 93 Removing the 3GB Swite es ahasi tiaa aaea aaa aa aaa aa aaa aaa a A aa a Ea E aa ia a Moan A Ea Os A a A aA Ea see a aa 93 Protect Recording Databases from Corruption ccccecceeeeeeeeeeeseeeeeeeeeeeeeeaeeeaeeaeeeeecaeseesaeeaeesaesaeseaeeaeeaeeeeesaeeeeeeeeneeeaeees 93 USES ienas I e aad p
259. h the required microphone is attached Right click the required microphone and select Properties Specify properties as required Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure NetCentral Connections NetCentral settings are relevant only if you are using the NetCentral add on product in connection with the RC C recorder The NetCentral Settings lets you specify the login settings required for a NetCentral server to access the surveillance system in order to retrieve status information and alarms As In the Management Application s Navigation pane expand Advanced Configuration right click NetCentral and select Properties Enable the use of NetCentral connections by selecting the Enable NetCentral connections check box Specify required properties When ready click OK Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure NetMatrix The NetMatrix feature allows distributed viewing of live video from any camera to any NetMatrix recipient on a network operating with an RC C NVR Using NetMatrix is not necessary if using Ocularis NetMatrix Recipients Explained A computer on which NetMatrix triggered video can be viewed is known as a NetMatrix recipient In order to become a NetMatrix recipient the computer must have either the dedicated NetMatrix Monitor application or the multi pu
260. hardware device You have two options e Delete the databases for the cameras that are not inherited The databases of the cameras that could not be inherited by the new hardware devices will be deleted It will not be possible to view recordings from before the hardware replacement New databases will of course be created for future recordings by the new hardware devices e Leave the databases for the cameras that are not inherited The databases of the cameras that could not be inherited by the new hardware devices will not be deleted Even though the old databases still exist on the server it will not be possible to view recordings from before the hardware replacement Should you later want to delete the old databases deletion must take place manually New databases will of course be created for future recordings by the new hardware devices 4 Click Finish 5 When ready restart the Recording Server service The hardware replacement will not be evident in clients until you restart the Recording Server service First specify details about the new hardware device e Hardware device address P address or host name of the new hardware device e Hardware device port Port number to use for communicating with the hardware device Default is port 80 If the new hardware device is located behind a NAT enabled router or a firewall you may need to specify a different port number When this is the case also remember to configure the router firew
261. have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing Recommended check box is cleared When ready click OK and close the window What is Active Directory Active Directory is a distributed directory service included with several Windows Server operating systems users are specified centrally in Active Directory In short the benefits of importing user data from Active Directory are that administrators do not have to create separate user accounts for accessing the surveillance system because user authentication will be handled centrally by Active Directory and that users can use their Windows login when accessing the surveillance system no need to memorize separate user names and passwords Any prerequisites for adding users from Active Directory verifies client users identities using NTLM challenge handshake with a Microsoft Domain Controller In order to be able to import users and groups through Active Directory a server with Active Directory installed and acting as domain controller must be available on your network Consult your network administrator if in doubt Can I add groups from Active Directory You
262. have specified it correctly e User type Non editable field displaying whether the selected user is of the type basic user or Windows user Video When you configure video and recording for specific cameras properties are to a large extent camera specific Since such properties vary from camera to camera descriptions in the following are for guidance only If the selected camera is accessible a live preview is displayed Click the Configure Video Properties button to open a separate window with properties for the selected camera The video properties typically let you control bandwidth brightness compression contrast resolution rotation etc by overwriting existing values of selecting new ones When adjusting video settings you are for most cameras able to preview the effect of your settings in an image below the fields Video settings may feature an nclude Date and Time setting If set to Yes date and time from the camera will be included in video Note however that cameras are separate units which may have separate timing devices power supplies etc On Net Surveillance Systems Inc 150 RC C User Manual Configuration Camera time and NVR system time may therefore not correspond fully and this may occasionally lead to confusion As all frames are time stamped by the NVR upon reception and exact date and time information for each image is already known it is recommended that the setting is set to No Tip For cons
263. he Management Application s navigation pane expand Advanced Configuration right click Scheduling and Archiving and select Properties 2 Specify properties as required for Scheduling All Cameras Scheduling Options and Archiving When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Configure Camera specific Schedules With camera specific scheduling you can configure when e A camera should be online that is transfer video to the NVR e A camera should use speedup that is use a higher than normal frame rate e You want to receive any e mail and or SMS notifications regarding the camera e If the camera is a PTZ camera able to patrol when it should patrol and according to which patrolling profile Do the following 1 In the Management Application s navigation pane expand Advanced Configuration expand Scheduling and Archiving right click the required camera and select Properties 2 Specify properties as required for Online Period Speedup E mail Notification SMS Notification and if dealing with a PTZ camera capable of patrolling PTZ Patrolling When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 77 RC C User Manual Scheduling General Scheduling Properties Scheduling All Cameras All properties on a whit
264. he Number of pre alarm images field this field indirectly allows you to control how long before the event you want to receive pre alarm images from Send e mail if this event occurs Only available if e mail notification is enabled Select this if the NVR should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notifications also keep in mind individual cameras scheduling Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select if the NVR should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notification configuration When using SMS notifications also keep in mind individual cameras scheduling Delete Lets you delete a selected timer event Add When a specific hardware input event is selected clicking Add will add a timer event to the selected hardware input event Manual Event List of defined global events and cameras Contains a Global node and a list of all defined cameras You can configure as many manual events as required no matter whether they are global or camera specific A sign nex
265. he field Therefore if you specify 0 you will log current day s activity if you specify 1 you will keep one day plus the current day s activity and so on Audit Log Enable audit logging Audit logging is the only type of RC C logging which is not compulsory Select clear the check box to enable disable audit logging Path Audit log files are by default placed in the appropriate A Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista To specify another location for your audit log files type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder Days to log A new log file is created for each day with audit logging enabled and client user activity A log file older than the number of days specified in the field is automatically deleted By default the log file will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field The current day s activity is always logged provided audit logging is enabled and there is user activity Therefore if you specify 1 you will keep one day plus the current day s activity Note that if you specify 0 zero audit log files will be kept indefinitely disk space permitting Minimum logging interval Minimum number of seconds between logged events Specifying a high number of seconds between logged events may help r
266. hen configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application e PTZ type Your configuration options depend on the type of PTZ camera in question o Type 1 stored on server You define preset positions by moving the camera using the controls in the upper half of the window then storing each required position on the NVR server You can define up to 2550 preset positions this way o Type 2 imported from camera You import preset positions which have previously been defined and stored on the PTZ camera itself through the camera s own configuration interface The number of On Net Surveillance Systems Inc 38 RC C User Manual Camera Specific Properties allowed preset positions depends on the PTZ camera and driver used Type 3 stored on camera You define preset positions by moving the camera with the controls in the upper half of the window then storing each required position in the camera s own memory You are able to define up to 2550 preset positions this way If preset positions have already been defined for the camera you can simply import them for use with RC C For PTZ types 1 and 3 you can move the PTZ camera to required positions PTZ peeves Wee C By simply clicking the required position in the camera preview if supported by the camera By using the sliders located near the camera preview to move the PTZ camera along each of its axes the X axis for p
267. hey can transmit information to people near a camera Operators with the necessary rights can talk through such speakers using their Ocularis Client provided the computer running the Ocularis Client has a microphone attached Example An elevator is stuck Through a camera mounted in the elevator Ocularis Client operators can see that there is a person in the elevator A microphone attached to the camera records that the person says The elevator is stuck please help me out Through a speaker attached to the camera operators can tell the person that Help is on its way you should be out in less than fifteen minutes When managing microphones and speakers in RC C you manage the microphones and speakers attached to cameras not microphones and speakers attached to Ocularis Client operators computers Add Basic Users When adding a basic user you create a dedicated surveillance system user account with basic user name and password authentication for the individual user Note that adding the user as a Windows user will provide better security If you want to include users in groups make sure you add required groups before you add users You cannot add existing users to groups You can add basic users in two ways One is through the Configure User Access Wizard the other is described here 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Basic User
268. hile an output is triggered and an e mail notification is sent to relevant people To add a manual event do the following 1 Inthe Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Manual Events and select Add New Manual Event 2 Inthe list in the left side of the Manual Event Properties select global or a camera as required 3 Click the add button and specify required properties When ready click OK or click the Add button again to add a timer event to the event you have just created 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add a Timer Event Timer events are separate events triggered by the hardware input event or manual event or generic event under which they are defined Timer events occur a specified number of seconds or minutes after the event under which they are defined has occurred Timer events may be used for a wide variety of purposes typically for stopping previously triggered actions Examples e A camera starts recording based on a hardware input event for example when a door is opened a timer event stops the recording after 15 seconds e Lights are switched on and a camera starts recording based on a manual event a timer event stops the recording after one minute and another timer event switches the lights off after two minutes To add a timer event select any event yo
269. hiving paths for individual cameras If you use several surveillance servers in a master slave setup each surveillance server must archive to its own mapped location in order for archiving to work If you attempt to archive to the same mapped location for all the servers archiving will fail All properties on a white background are editable properties on a light blue background cannot be edited e Enable dynamic path selection archives Enables the use of dynamic path selection allowing you to select which paths you want to use The list of selectable paths initially represents all drives on the server both local and mapped drives You can add further paths with the New path feature below the list e Use Lets you select particular paths for use as dynamic archiving paths Also lets you select a previously manually added path for removal see description of Remove button in the following e Drive Indicates which drive the path belongs on e Path Path to use as dynamic archiving path On Net Surveillance Systems Inc 118 RC C User Manual Configuration Drive Size Total amount of space on the drive that is free space as well as used space Free Space Amount of free space available on the drive in question New path Lets you specify a new path and add it to the list using the Add button Paths must be reachable by the surveillance system server and you must specify the path using the UNC Universal Naming Convention format ex
270. iae deede Microphone Properties Speak r Properties aninion i naa aiio ea e p e aE aa aaea aaeoa a ntd Cameras amp RecordingS ssesssssnssursurnunrunnunnunnnnnunnnnnnun nunnur nunnur nunnu nunn ennn nn nnn nunen ennnen nannan 21 Add Cameras amp Other Hardware Devices cecceeceeceeseeeeeesecseceeeeaecaeeeeesaeeeaesaeeeesaesaeesaesaeeeaeeaeseesaeeaeeeeesaeeeeeeaeeeeeeneeate 21 Config re Video amp RECOPING mne nenaad ra eead epte d soba nana ad daeina dae 21 View Video from Cameras in Management Application cceceeceeceeseeeeeeeeseeeeeeeaeeeeeeaeeeeeeaeeeeeaeseeeaesaeesaeeaeseeeeaeeeneeeeeate 22 Configure When Cameras Should Do What ccceceeseceeseeeeeeeeeneeeeeeaeeeeecaeseesaeseeesaeseeeaesaeseeeseeseaeeaeseeeeesaeseeseaeeaeeeeeeaees Monitor Storage Space Usage 0 c Database Resizing Disable or Delete Cameras 2702 seieg avarice cea ea vin aia ea i ateei Eaa Wizard Siain Aa AGEE ALAE LAE L L E A EAA Configure Video amp Recording Wizard ee Adjust Motion Detection Wizard ci csiccsesvcccceccccccciscvatecedscceschcoussevastessecesstevstsneavencbecsdiaaevateuiavdsnssecesstsddcaecendvusavectescodustessbadss General Recording amp Storage Properties c ccc cceeceeeeeeseeeeeeeeeeeeeeeeeseeeeeseeeseeneees 24 Recording amp Archiving Paths cece eeeeesseceseeeseeseaeeeseessaeeceeeceaeesaeeccaeeeseeseaeseeueceseesaaeceaeseaeseaeesuseeaeeseaeseaeeesaeseaeeeeges 24 Dynamic Path
271. ice deciding what to do with recordings from cameras attached to the old hardware device etc Online Period When you configure scheduling for specific cameras your Online Period settings are probably the most important since they determine when each camera should transfer video to the NVR By default cameras added to the RC C NVR will automatically be online and you will only need to modify the online period settings if you require cameras to be online only at specific times or events Note however that this default may be On Net Surveillance Systems Inc 135 RC C User Manual Configuration changed as part of the general scheduling options in which case subsequently added cameras will not automatically be online The fact that a camera transfers video to the NVR does not necessarily mean that video from the camera is recorded Recording is configured separately see Configure Video amp Recording You specify a camera s online periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in pink papin ay e Events within periods of time example from Event A occurs until Event B occurs Mondays from 08 30 until 17 45 shown in yellow The two options can be combined panafaa ETL but they cannot overlap in time The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you c
272. id DLKs If so specify a valid DLK for each listed hardware device either manually in the Device License key DLK column or by clicking the Import DLKs button to import the DLKs from your dlk file Then click Next What is a dlk file You get DLKs as part of the software registration process Upon registration all your DLKs are sent to you as a single dlk file attached to an e mail Then all you have to do is import the dlk file and will know the DLKs for all your hardware devices All properties on a white background are editable properties on a light blue background cannot be edited On the last page the wizard provides you with a detailed overview listing each camera microphone and or speaker attached to the hardware devices All properties on a white background are editable properties on a light blue background cannot be edited On Net Surveillance Systems Inc 157 RC C User Manual Configuration e All cameras etc are by default enabled selected in the Enable column This means that they are able to communicate with If required you can disable individual cameras microphones or speakers and thus prevent them from communicating with e All cameras etc get automatically generated names based on their type plus a number examples Camera 1 Microphone 26 Such names are shown in the Name column If required you change names manually or select another name format in the Auto generated name format list o Device
273. ied using this method e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Wizards Intros Add Hardware Devices Wizard Advanced Method The Advanced option scans your network for relevant hardware devices based on your specifications regarding required IP ranges discovery methods drivers and device user names and passwords If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Advanced option the wizard is divided into a number of pages e Device Discovery IP Ranges Drivers and Authentication e Detected and Verified Hardware Devices e Missing DLKs if Applicable e Overview and Names Add Hardware Devices Wizard Express Method The Express option scans your network for relevant hardware devices and helps you quickly add them to your system With the Express option the wizard only scans for hardware devices supporting device discovery and only on the part of your network subnet where the RC C server itself is located What is device discovery Device discovery is a method with which hardware devices make information about themselves available on the network Based on such information the NVR can quickly recognize relevant hardware devices such as cameras and video encoders and include them in the scan To use the Express method the RC C server and your cameras must be on the same
274. if the NVR should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notification configuration When using SMS notifications also bear in mind individual cameras scheduling e Delete Lets you delete a selected event e Add Lets you add a new event When the Generic Events node is selected clicking Add will add a new generic event When a specific generic event is selected clicking Add will add a timer event to the selected generic event Timer Event e Timer event name Specify a name for the event Timer event names must be unique and must not contain the following characters lt gt amp Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details e Timer event occurs after Lets you specify the amount of time that should pass between the main event occurring and the timer event in seconds or minutes Hardware Output e Output name Specify a name for the event If you are going to make the hardware output available for manual activation in clients this is the name that client users will see Hardware output names must be unique and must not contain the following characters lt gt amp Some hardware devices only support hardware output names of a certain length and or with a certain structure Refer to the hardware device s documentation for exact details e Output c
275. ify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message SMS Notification When you configure scheduling for specific cameras you can specify SMS mobile phone text message notification periods Before you can define this type of schedule SMS notification must be enabled You specify a camera s SMS notification periods by creating schedule profiles based on e Periods of time example Mondays from 08 30 until 17 45 shown in green jaritan The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile On Net Surveillance Systems Inc 81 RC C User Manual Scheduling 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer an
276. ify a port number for use when the should be available from the internet The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization Specify which drives you want to store cameras recordings on You can specify separate drives paths for recording and archiving All properties on a white background are editable properties on a light blue background cannot be edited What is archiving Archiving an integrated and automated feature helps you store recordings beyond the capabilities of s standard database Archiving thus maximizes storage capacity and minimizes risk For more detailed information see Archiving Extends Recording Storage e Drive Letter representing the drive in question for example C To add further network drives use the Network drive field described in the following e Purpose Lets you select what you want to use the drive for o Notin use Do not use the drive Recording Only available if the drive is a local drive on the server network drives cannot be used for recording Use the drive for storing recordings in s regular database o Archiving Use the drive for archiving For archiving it is generally a good idea to use a drive which has plenty of space Tip With dynamic path selection for archives see description in the following you do not have to worry about drive space o Rec amp Archiving Only available if the drive is a local
277. iguration e Server name Name of the server as it will appear in clients Client users with rights to configure their clients will see the name of the server when they create views in their clients e Local port Port number to use for communication between clients and the surveillance server The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization e Character encoding language Select required language character set Example If the surveillance server runs a Japanese version of Windows select Japanese Provided access clients also use a Japanese version of Windows this will ensure that the correct language and character encoding is used in clients communication with the server If using a master slave setup remember to specify the same language character set on all involved servers e Internet access Select the check box if the server should be accessible from the internet through a router or firewall If selecting this option also specify the public outside IP address and port number in the following fields When using public access the router or firewall used must be configured so requests sent to the public IP address and port are forwarded to the local inside IP address and port of the server e Internet address Lets you specify a public IP address or hostname for use when the server should be available from the internet e internet port Lets you spec
278. iguration of Download Manager The NVR Download Manager has a default configuration This ensures that your organization s users can access standard features without the surveillance system administrator having to set up anything The NVR Download Manager s configuration is represented in a tree structure NVR Download Manager s Tree Structure Explained e The first level of the tree structure simply indicates that you are working with a RC C system e The second level refers to the languages in which the welcome page is available In the example the welcome page is available in a multiple languages e The third level refers to the features which are or can be made available to users e The fourth level refers to particular versions of each feature such as version 4 0 which are or can be made available to users e The fifth level refers to the language versions of the features which are or can be made available to users On Net Surveillance Systems Inc 106 RC C User Manual Clients amp Ancillary Applications The fact that only standard features are initially available and only in the same language version as the surveillance system itself helps reduce installation time and save space on the server There is simply no need to have a feature or language version available on the server if nobody is going to use it You can however easily make more features and or languages available as required See Making New Feat
279. il 17 45 shown in blue Jashan The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 In the field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp Click the Add New button which becomes available when you specify a name In the calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 wn 7 e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in
280. iles type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder Days to log A new log file is created each day the Management Application and or the services are used A log file older than the number of days specified in the field is automatically deleted By default the log file will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field The current day s activity is always logged even with a value of 0 in the field Therefore if you specify 0 you will log current day s activity if you specify 1 you will keep one day plus the current day s activity and so on Event Log Path Event log files are by default placed in the appropriate A I Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista To specify another location for your event log files type the path to the required folder in the Path field or click the browse button next to the field to browse to the required folder Days to log A new log file is created for each day on which events occur A log file older than the number of days specified in the field is automatically deleted By default the log file will be stored for seven days To specify another number of days max 9999 simply overwrite the value in the field The current day s activity is always logged even with a value of 0 in t
281. ill be allowed access Any clients in excess of the allowed number will receive an error message when attempting to log in By default a maximum of ten simultaneously connected clients are allowed To specify a different maximum number simply overwrite the value Tip To allow an unlimited number of simultaneously connected access clients type 0 zero in the Max number of clients field A four minute session timeout period applies for client sessions on In many cases client users may not notice this at all However the session timeout period will be very evident if you set the Max number of clients value to 7 When that is the case and the single allowed client user logs out four minutes must pass before it will be possible to log in again On Net Surveillance Systems Inc 147 RC C User Manual Configuration SMS Notifications Enable SMS Enables the use of SMS notifications allowing you to specify further properties GSM modem connected to Select port connecting the RC C server to the GSM modem SIM card PIN code Specify PIN code for the SIM card inserted in the GSM modem SIM card PUK code Specify PUK code that is unlocking code for the SIM card inserted in the GSM modem SMS central phone number Specify the number of the SMS central to which the GSM modem should connect in order to send SMS notifications Recipient phone number Specify the number of the mobile telephone to which SMS alerts should be sent It is on
282. illance Systems Inc 39 RC C User Manual Camera Specific Properties e Set New Position Only available when you have selected PTZ type 1 or 3 Lets you change an already defined preset position In the list select the preset position you want to change Then move the camera to the new required position using the controls in the upper half of the window Then click the button to overwrite the old position with the new one e Delete Only available when you have selected PTZ type 1 or 3 Lets you delete an already defined preset In the list select the preset position you want to delete then click the button Before you delete a preset position make sure it is not used in PTZ patrolling or PTZ on event Since the preset positions are stored on the camera you can bring a deleted preset position back into RC C by clicking the Import refresh button If you bring back a preset position this way and the preset position is to be used in PTZ patrolling or PTZ on event you must manually configure PTZ patrolling and or PTZ on event to use the preset position again e Test Lets you try out a preset position In the list select the preset position you want to test then click the Test button to view the camera move to the selected position e and Lets you move a preset position selected in the list up and down respectively The selected preset position is moved one step per click By moving preset positions up or down you can control
283. imilar properties quickly For example you have 50 cameras and you want to change the recording path archiving path and retention time for all of them Instead of having to enter the same three pieces of information 50 times you can simply enter them once in the template and then apply the template to the 50 cameras with only two clicks Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp 2 Shortcut Camera shortcut may be used in certain access clients Recording Path Path to the folder in which the camera s database should be stored Default is C VideoData To browse for another folder click the browse icon next to the required cell You are only able to specify a path to a folder on a ocal drive You cannot specify a path to a network drove The reason for this limitation is that if you were using a network drive it would not be possible to save recordings if the network drive became unavailable If you change the recording path and there are exi
284. important that you have administrator rights on the computer that will run If you only have standard user rights you will not be able to configure the surveillance system Consult your IT system administrator if in doubt about your rights Important Port Numbers RC C uses particular ports when communicating with other computers cameras etc What is a port A port is a logical endpoint for data traffic Networks use different ports for different types of data traffic Therefore it is sometimes but not always necessary to specify which port to use for particular data communication Most ports are used automatically based on the types of data included in the communication On TCP IP networks port numbers range from 0 to 65536 but only ports 0 to 1024 are reserved for particular purposes For example port 80 is used for HTTP traffic when viewing web pages When using RC C make sure that the following ports are open for data traffic on your network e Port 20 and 21 inbound and outbound Used for FTP traffic FTP File Transfer Protocol is a standard for exchanging files across networks FTP uses the TCP IP standards for data transfer and is often used for uploading or downloading files to and from servers e Port 25 inbound and outbound Used for SMTP traffic SMTP Simple Mail Transfer Protocol is a standard for sending e mail messages between servers This port should be open since depending on configuration some cameras may sen
285. increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message Event Notification When you configure video and recording for specific cameras properties include event notification What Is an Event Notification Event notification lets you inform Ocularis Client and Ocularis Client Lite users that an event has occurred on the RC C system Event notification can be valuable for client users as they will be able to quickly detect that an event has occurred even though their focus was perhaps on something else the moment the event occurred Tip Even though event notification is configured separately for each camera you can select between all events on the NVR regardless whether events are manual generic or originate on another hardware device than the camera itself In the Ocularis Client event notification is given by a yellow indicator which lights up when a relevant event has taken place An optional sound on event notification can furthermore be configured in the Ocularis Administrator when using Ocularis Base On Net Surveillance Systems Inc 120 RC C User Manual Configuration In Ocularis Client three differently colored indicators Rear Hallway Camera 1 are available for each camera e The yellow event indicator When
286. ings to Be Aware of Before you specify the use of hardware input and hardware output units on a hardware device verify that sensor operation is recognized by the hardware device Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the Ocularis release notes to verify that input and output controlled operations are supported for the hardware device and firmware used If you are using several NVR servers in a master slave setup input and output on a specific hardware device should be defined on one of the servers only Do not define the same input or output on the same hardware device on several servers This applies even for dedicated input output devices On Net Surveillance Systems Inc 48 RC C User Manual Events Input amp Output e Moving on You do not have to configure hardware input units separately any hardware input units connected to hardware devices are automatically detected when you add the hardware devices to the RC C recorder The same goes for hardware output but hardware output does require some simple configuration in the NVR Before configuring events of any type configure general event handling such as which ports the NVR should use for event data Normally you can just use the default values but it is a good idea to verify that your organization is not already using the ports for other purposes See Configure General Event Handling When you
287. ion simply clear the field containing the event Restart services after having made changes to PTZ settings Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application On Net Surveillance Systems Inc 42 RC C User Manual Camera Specific Properties NetCentral Configure NetCentral Connections NetCentral settings are relevant only if you are using the NetCentral add on product in connection with the RC C recorder The NetCentral Settings lets you specify the login settings required for a NetCentral server to access the surveillance system in order to retrieve status information and alarms 1 In the Management Application s Navigation pane expand Advanced Configuration right click NetCentral and select Properties 2 Enable the use of NetCentral connections by selecting the Enable NetCentral connections check box 3 Specify required properties When ready click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Properties NetCentral e Enable NetCentral connections Enables the use of NetCentral connections allowing you to specify further properties e Login N
288. ist of detected hardware devices to see if it contains unwanted devices If it does clear the check box in the Use column for each unwanted device e If any hardware devices are missing from the list verify that the missing hardware devices support device discovery verify that they are working and connected to the same part of the network as the server then click the Rescan button If hardware devices detected in the first scan cannot be detected in the second scan the wizard will still remember them e Inthe User name column select or type the user name required to access the administrator account on each hardware device The administrator account gives full access and is going to need that for each hardware device Many organizations use the hardware device manufacturer s default user names for their hardware devices If that is the case in your organization select lt default gt do not type a manufacturer s default user name as this can be a source of error trust that will know the manufacturer s default user name Other typical user names such as admin or root are also selectable from the list If requiring a user name which is not on the list simply type the required user name Tip User names you type yourself will subsequently be added to the list so you can easily select them later e Inthe Password column specify the password required to access the administrator account on each hardware device The administrator account gives fu
289. istent time synchronization you may if supported by the camera automatically synchronize camera and system time through a time server Video Recording The term recording means saving video and if applicable audio from a camera in the camera s database on the surveillance system server Video audio is often saved only when there is a reason to do so for example as long as motion is detected when an event occurs and until another event occurs or within a certain period of time All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Video Recording properties can also be specified individually for each camera Template The template can help you configure similar properties quickly For example you have 50 cameras and you want 10 seconds of pre recording on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with
290. ived recordings this is the reason e Delete Archives Click button to delete all archived recordings for the camera Recordings in the camera s regular database will not be affected The ability to delete is available regardless of whether you use a single archiving path or dynamic archiving paths IMPORTANT Use with caution all archived recordings for the camera will be permanently deleted As a security measure you will be asked to confirm the deletion e Retention time Total amount of time for which you want to keep recordings from the camera that is recordings in the camera s database as well as any archived recordings Default is 30 days On Net Surveillance Systems Inc 143 RC C User Manual Configuration Note that the retention time covers the total amount of time you want to keep recordings Database repair action Select which action to take if the database becomes corrupted o Repair scan delete if fails Default action If the database becomes corrupted two different repair methods will be attempted a fast repair and a thorough repair If both repair methods fail the contents of the database will be deleted o Repair delete if fails f the database becomes corrupted a fast repair will be attempted If the fast repair fails the contents of the database will be deleted o Repair archive if fails If the database becomes corrupted a fast repair will be attempted If the fast repair fails the contents of the datab
291. l System Restoration amp Migration ArchivePath1 information relates to a specific camera otherwise to all cameras attached to the hardware device e OldRecordingsNewPath optional number Lets you specify what to do with old recordings in case RecordingPath or ArchivePath have been changed If this parameter is not specified default behavior is Leave see the following If specified as for example OldRecordingsNewPath1 information relates to a specific camera otherwise to all cameras attached to the hardware device Valid options are Delete deletes old recordings Leave leaves old recordings for offline investigation but unavailable for online system or Move moves old recordings to archive e OldRecordingsNewMac optional number Lets you specify what to do with old recordings in case a new MAC address has been specified for the hardware device If this parameter is not specified default behavior is Leave see the following If specified as for example OldrecordingsNewMac1 information relates to a specific camera otherwise to all cameras attached to the hardware device Valid options are Delete deletes old recordings Leave leaves old recordings for offline investigation but unavailable for online system or Inherit renames all old recording folders according to the new MAC address thus making them available for the online system e RetentionTime optional number Required retention time in minutes Remember that rete
292. l also depend on GOP JPEG and audio kilobyte size Storage Information The storage usage summary information lets you view how much storage space you have used and free on your system Drive Letter representing the drive in question for example C Path Path to the storage area for example C or OurServer OurFolder OurSubfolder Usage What the storage area is used for for example recording or archiving Drive Size Total size of the drive Video Data Amount of video data on the drive Other Data Amount of other data on the drive Free Space Amount of unused space left on the drive Tip To quickly view disk space usage in a pie chart format select the line representing the drive you are interested in On Net Surveillance Systems Inc 31 RC C User Manual Camera Specific Properties Camera Specific Properties Camera e Enabled Cameras are by default enabled meaning that provided they are scheduled to be online they are able to transfer video to the NVR If required you can disable an individual camera in which case no video audio will be transferred from the camera source e Camera name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp Tip Camera names can be very long if required
293. l also see the bit rate in Mbit second IMPORTANT Viewing of live video in the Management Application may under certain circumstances affect any simultaneous recording from the camera in question The following three scenarios are important to consider 1 Some cameras supporting multistreaming may have their frame rate reduced by half or respond with other negative effects when a second stream is opened 2 If a camera delivers live video in very high quality the de coding of images may increase the load on the Recording Server service This may in turn affect ongoing recordings negatively 3 Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ Configure When Cameras Should Do What Use the scheduling feature to configure when e Cameras should be online that is transfer video to the NVR e Cameras should use speedup i e use a higher than normal frame rate e You want to receive any e mail and or SMS notifications regarding cameras e PTZ cameras should patrol and according to which patrolling profile e Archiving should take place See Configure General Scheduling amp Archiving and Configure Camera specific Schedules Monitor Storage Space Usage To view how much storage space you have use
294. l not affect the surveillance system make sure you click the No button when the warning message asks you if you really want to terminate the process e Hard Disk Failure Protect Your Drives Hard disk drives are mechanical devices and as such they are vulnerable to external factors The following are examples of external factors which may damage hard disk drives and lead to corrupt camera databases e Vibration make sure the surveillance system server and its surroundings are stable e Strong heat make sure the server has adequate ventilation e Strong magnetic fields avoid e Power outages make sure you use a UPS see more information in the previous e Static electricity make sure you ground yourself if you are going to handle a hard disk drive e Fire water etc avoid On Net Surveillance Systems Inc 94 RC C User Manual Users Users Overview of Users and Groups To get an overview of the NVR system s users expand Advanced Configuration in the Management Application s navigation pane then expand Users The term users primarily refers to users who are able to connect to the surveillance system through their clients You can configure such users in two ways e As 8 basic users authenticated by a user name password combination e As 8 Windows users authenticated based on their Windows login You can add both types of users through the Configure User Access wizard or individually see Add Basic Users and Add
295. laris Client so that you can see the yellow event indicator 5 In Windows Start menu select Run and type the following in the Open field e If you are performing the test on the RC C server itself telnet localhost 1234 e If you are performing the test from a remote computer Substitute oca host with the IP address of the RC C server Example If the IP address of the RC C server is 123 123 123 123 type telnet 123 123 123 123 1234 This will open a Te net window In the above examples the number 1234 indicates the port on which the RC C server listens for generic events Port 1234 is the default port for this purpose but it is possible to change this by specifying another port number as part of the general event handling configuration If the alert and generic event port number has been changed on your system type your system s alert and generic event port number instead of 1234 7 Inthe Te net window type the terms so called event substring required to trigger your generic event In our case a single term video is required s Telnet localhost o xi While typing in the Telnet window you may experience so called echo This is simply the server repeating some or all of the characters it receives it will not have any impact as long as you are sure you type the required characters 8 Close the Telnet window by clicking the close button in its top right corner It is important that you close the window your inpu
296. lave servers can use in a master slave setup An unlimited number of servers can be defined as slave servers under a designated master server using the same Software License Code How do I switch around which server is master and which server is slave If you want a slave server to become a master server simply clear Enable as master server on the original master server and click OK In the Management Application s navigation pane right click the slave server which you want to become master server and select Properties Then select Enable as master server Next click Add to add slave servers to the new master server Do I need a master slave setup with Ocularis No The master slave setup is not necessary when using Ocularis but it is supported when working in a legacy environment Properties Master and Slave Properties Master Server Properties e Enable as master server Select to enable as master server e Add Lets you add slave servers Slave Server Properties e Address IP address of the slave server Port Port number of the slave server Delete Lets you remove a slave server from the list of slave servers Select the slave server in the list and click the Delete button When selecting Master Server the Delete button is disabled and the Add button is enabled provided that Enable as master server is selected allowing you to add slave servers to the master server When selecting a slave the Add button is disabled and
297. layer 2 network that is a network where all servers cameras etc can communicate without the need for a router The reason for this is that device On Net Surveillance Systems Inc 152 RC C User Manual Configuration discovery relies on direct communication between the RC C server and the cameras If you know that routers are used on your network use the advanced or manual method instead If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Express option the wizard is divided into a number of pages Hardware Detection and Verification e Missing DLKs if Applicable e Overview and Names Add Hardware Devices Wizard Import from CSV File Method This option lets you import data about hardware devices and cameras as comma separated values CSV from a file a highly effective method if setting up several similar systems First select whether cameras and the RC C server is online that is having working network connections or offline Then point to the CSV file and click Next e CSV File Format and Requirements The CSV file must have a header line defining each value on the subsequent lines and subsequent lines must each contain information about one hardware device only A minimum of information is always required for each hardware device but note that the minimum required information is different depending on whether your server a
298. lect the required profile for the PTZ patrolling schedule for the camera s in question e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras e New schedule profile Lets you create a new schedule profile of any type by clicking the Create button On Net Surveillance Systems Inc 146 RC C User Manual Configuration Scheduling Options Start cameras on client requests Cameras may be offline for example because they have reached the end of an online schedule in which case client users will not be able to view live video from the cameras However if you select Start cameras on client requests client users will be able to start the camera technically force the camera to be online outside its online schedule in order to view live video from the camera Schedule profile for new cameras Lets you select which online schedule profile to use as default for cameras you subsequently add to your surveillance system Note that your selection only applies for the online schedule not for any other schedules Default selection is Always on meaning that new cameras will always be online that is transferring video to the NVR server for live viewing and further processing Maximum delay between reconnect attempts Lets
299. lect the required profile for the SMS mobile phone text message notification schedule for the camera s in question PTZ Patrolling Only available for PTZ Pan Tilt Zoom cameras with patrolling the continuous movement of a PTZ camera between a number of preset positions Lets you select the required profile for the PTZ patrolling schedule for the camera s in question Select All Click button to select all cameras in the Apply Template column Clear All Click button to clear all selections in the Apply Template column Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras New schedule profile Lets you create a new schedule profile of any type by clicking the Create button Scheduling Options Start cameras on client requests Cameras may be offline for example because they have reached the end of an online schedule in which case client users will not be able to view live video from the cameras However if you select Start cameras on client requests client users will be able to start the camera technically force the camera to be online outside its online schedule in order to view live video from the camera Schedule profile for new cameras Lets you select which online schedule profile to use as default for cameras you subsequently add to your surveillance system Note that your selection only applies for the online schedule not for any other schedules Defa
300. lication s toolbar Tip You can quickly restore default settings by clicking the button below the behavior list On Net Surveillance Systems Inc 70 RC C User Manual Management Application Configure the Management Application Password Protection By default anyone who is able to log in to the RC C server is able to use the Management Application The reason for this is that such people are likely to have administrator rights If required you can password protect access to the Management Application for additional security T In the Management Application s navigation pane expand Advanced Configuration expand Users right click Administrator and select Properties Under Management protection select Enable Specify required password and repeat it to be sure you have specified it correctly Only use the Old password field if changing an existing password or disabling management protection in which case the old password is required to prove that you have the rights to make the changes Click OK Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 71 RC C User Manual Master amp Slave Servers Master amp Slave Servers Configure Master and Slave Servers You can create a master slave setup of NVR servers A master slave setup will allow remote users to transparently connect to more than one server simultaneously
301. ll access and is going to need that for each hardware device If the same password is used for all the hardware devices use the Password field below the list then click the Set on All button which becomes available when you specify a password in the field Tip If in doubt about which password to use ask yourself Have you previously used a web page to connect to the hardware device and view video While you did this were you also able to configure camera settings such as resolution etc If you can answer yes to both questions you were in all likelihood using the hardware device s administrator account in which case you will also know the password e When you have specified a password for all hardware devices on the list except unwanted devices click Next This will verify that all passwords are correct and mark each device in the Verified column If any hardware devices cannot be verified make sure you have specified the correct passwords then click Next again e f you have valid Device License Keys DLKs for all the detected hardware devices the next wizard page will provide you with an overview and ask you to select names for cameras etc If a valid DLK is missing for one or more of the detected hardware devices the next wizard page will prompt you to supply valid DLKs before you continue If a valid Device License Key DLK is missing for one or more of the detected hardware devices the wizard will prompt you to supply val
302. ll use a considerable amount of system resources on scanning all the data which is being archived This may affect system performance negatively Also virus scanning software may temporarily lock each file it scans which may further impact system performance negatively e Likewise virus scanning software on the RC C server is likely to use a considerable amount of system resources on scanning data used by the Download Manager On Net Surveillance Systems Inc 3 RC C User Manual System amp Requirements If allowed in your organization you should therefore disable any virus scanning of affected areas such as camera databases etc on the RC C server as well as on any archiving destinations Time Server Recommended All images are time stamped by upon reception but since cameras are separate units which may have separate timing devices power supplies etc camera time and system time may not correspond fully and this may occasionally lead to confusion If supported by your cameras we recommend you auto synchronize camera and system time through a time server for consistent synchronization For information about configuring a time server searching www microsoft com for time server time service or similar On Net Surveillance Systems Inc 4 RC C User Manual Installation Installation Installation Do not install RC C on a mounted drive that is a drive attached to an empty folder on an NTFS NT File System volume
303. lumn lists features related to playback In the Live column the following features all selected by default are available e Live Ability to view live video from the selected camera s o PTZ Ability to use navigation features for PTZ Pan Tilt Zoom cameras A user group will only be able to use this right if having access to one or more PTZ cameras o PTZ Preset Positions Ability to use navigation features for moving a PTZ camera to particular preset positions A user group will only be able to use this right if having access to one or more PTZ cameras with defined preset positions Output Ability to activate output lights sirens door openers etc related to the selected camera s o Events Ability to use manually trigger events related to the selected camera s o Incoming audio Ability to listen to incoming audio from microphones related to the selected camera s Outgoing audio Ability to talk to audiences through speakers related to the selected camera s o Manual recording Ability to manually start recording for a fixed time defined by the surveillance system administrator On Net Surveillance Systems Inc 99 RC C User Manual Users In the Playback column the following features all selected by default are available e Playback Ability to play back recorded video from the selected camera o AVIJPEG Export Ability to export evidence as movie clips in the AVI format and as still images in the JPEG f
304. ly possible to send SMS notifications to a single telephone number Message Specify required message text for the SMS notification Message text must be no longer that 160 characters and must only contain the following characters a z A Z 0 9 as well as commas and full stops Note that camera information as well as date and time information is automatically included in SMS notifications Tip While you write the counter below the Message fields indicates how many characters you have left to use Time between motion and database related SMSs per camera Minimum time in minutes to pass between the sending of each SMS notification per camera This interval only applies for SMS notification generated by detected motion or database related events SMS notification generated by other types of events will still be sent out whenever the events occur Examples If specifying 5 a minimum of five minutes will pass between the sending of each motion or database related SMS notification per camera even if motion or database events are detected in between If specifying 0 SMS notifications will be sent each time motion or database events are detected potentially resulting in a very large number of SMS notifications being sent If using the value 0 you should therefore consider cameras motion detection sensitivity settings Test Lets you test your SMS notification configuration by sending a test SMS to the specified recipient Note that you mu
305. m requirements 2 Insert the surveillance system software DVD wait for a short while select required language then click the Install Ocularis Client link 3 Depending on your security settings you may receive one or more security warnings Do you want to run or save this file Do you want to run this software or similar exact wording depends on your browser version When this is the case accept the security warnings by clicking Run or similar exact button names depend on your browser version 4 When the installation wizard starts click Next to continue the installation and follow the steps in the installation wizard Typically you download the Ocularis Client from the surveillance system server then install it on your computer Alternatively your surveillance system administrator may ask you to install the Ocularis Client from a DVD Surveillance system administrators can automatically get the Ocularis Client installed on the surveillance system server this happens as part of the surveillance system server installation To download and install the Ocularis Client from the surveillance system server do the following 1 Verify that your computer meets the Ocularis Client s minimum system requirements 2 Open an Internet Explorer browser version 6 0 or later and connect to the surveillance system server at the URL or IP address specified by your system administrator When you are connected to the surveillance system server
306. mes must be unique and must not contain any of the following special characters lt gt amp On some hardware devices audio can also be enabled disabled on the hardware device itself typically through the hardware device s own configuration web page If audio on a hardware device does not work after enabling it in the Management Application you should thus verify whether the problem may be due to audio being disabled on the hardware device itself On Net Surveillance Systems Inc 20 RC C User Manual Cameras amp Recordings Cameras amp Recordings Add Cameras amp Other Hardware Devices You add cameras and other hardware devices such as video encoders DVRs etc to the system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well The wizard offers you four different ways of adding cameras e Express recommended Scans your network for relevant hardware devices and helps you quickly add them to your system To use the Express method the RC C server and your cameras must be on the same layer 2 network that is a network where all servers cameras etc can communicate without the need for a router See Add Hardware Devices Wizard Express e Advanced Scans your network for relevant hardware devices based on your specifications regarding required IP ranges discovery methods drivers and device user names and
307. micolon Example Rich Matthew Marc Ari 3 When ready click OK Any prerequisites for adding users from a local database The users must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing Recommended check box is cleared When ready click OK and close the window On Net Surveillance Systems Inc 171 RC C User Manual Configuration What is Active Directory Active Directory is a distributed directory service included with several Windows Server operating systems users are specified centrally in Active Directory In short the benefits of importing user data from Active Directory are that administrators do not have to create separate user accounts for accessing the surveillance system because user authentication will be handled centrally by Active Directory and that users can use their Windows login when accessing the surveillance system no need to memorize separate user names and passwords Any prerequisites for adding users from Active Directory verifies client users identities using NTLM challenge handshake with a Microsoft Domain Controller In order to be able to import users and groups through Acti
308. mmended method If you want to include users in groups make sure you add required groups before you add users You cannot add existing users to groups You can add Windows users in two ways One is through the Configure User Access Wizard the other is described here The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple files sharing check box is cleared When ready click OK and close the window 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups dialog Select Users or Groups Ax Select thet object type Users ot Groupe Diyect Types Erom thes location MMO1232 Locations Enter the object names to select cicib Advanced Carcel Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names to select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several use
309. mplate column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras Default Microphone Microphone 3 ult Speaker Speaker 2 Example Only the selected value is applied using this method e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Audio Recording When you configure video and recording for specific cameras you can determine whether audio should be recorded or not Your choice will apply for all cameras on the system e Always Always record audio on all applicable cameras e Never Never record audio on any cameras Note that even though audio is never recorded it will still be possible to listen to live audio in the Ocularis Client If you record audio it is important that you note the following e Only audio from microphones is recorded Only incoming audio that is audio recorded by microphones attached to hardware devices is recorded Outgoing audio that is what Ocularis Client operators say when they talk through speakers attached to hardware devices is not recorded e Audio recording affects video storage capacity Audio is recorded to the associated camera s database It is important to keep in mind that the database is likely to become full earlier if recording audio and video than if only recording video The fact that the database becomes full is not in itself a pr
310. n advanced users may select Custom installation and choose which features to install and where to install them 6 Select Install licensed version Specify your user name organization and Software License Code SLC When ready click Next 7 Click the nstall button to begin the software installation During the process all the necessary components will be installed one after the other 8 Click Finish on the last step to complete the installation e Ifa Status Information window appears on your screen during installation simply click its OK button The window simply provides a summary of your installation When installation is complete you can begin configuring RC C through its Management Application Double click the Management Application desktop shortcut or select Start gt All Programs gt OnSSI gt Management Application See more under Get Your System Up amp Running Upgrade Upgrade from a Previous Version Upgrading RC C is an easy task and you need not worry about spending hours reconfiguring your software The following information applies if upgrading from one RC C version to another as well as if upgrading to RC C from NetDVMS NetDVR or ProSight SMB e Prerequisites e Take note of your SLC Software License Code The SLC will change when the software version number changes e f your SLC has changed so have your DLKs Device License Keys You get DLKs Device License Keys upon request Once approved
311. n specify a suitable file name and click Save If you intend to set up an identical version of your surveillance system elsewhere do not export your configuration as backup since this may lead to the same device information being used twice in which case clients may get the following error message Application is not able to start because two or more cameras are using the same name or id Instead export your configuration as a clone When you export as a clone the On Net Surveillance Systems Inc 86 RC C User Manual System Restoration amp Migration export takes into account the fact that you will not use the exact same physical cameras etc even though your new system may otherwise be identical to your existing one Export Configuration as Clone With this option all relevant NVR configuration files will be collected and GUIDs Globally Unique IDentifiers unique 128 bit numbers used for identifying individual system components such as cameras will be marked for later replacement Why are GUIDs marked for replacement GUIDs are marked for later replacement because they refer to specific components cameras etc Even though you wish to use the cloned configuration for setting up a new similar system using similar types of cameras the new system will not use the exact same physical cameras as the cloned system When the cloned configuration is later used in a new system the GUIDs will therefore be replaced with GUIDs represe
312. n configuration When using SMS notifications also bear in mind individual cameras scheduling Delete Lets you delete a selected event Add Lets you add a new event When Global or a specific camera is selected clicking Add will add a new manual event When a specific manual event is selected clicking Add will add a timer event to the selected manual event Generic Event Event name Specify a name for the event Generic event names must be unique and must not contain the following characters lt gt amp Event port Read only field displaying the port number on which the NVR listens for generic events default is port 1234 The port number can be changed as part of the general event handling configuration Event substring Lets you specify the individual items for which the NVR should look out for when analyzing data packages Specify one or more terms then click the Add button to add the specified term s to the Event message expression field the content of which will be used for the actual analysis Examples Single term User001 when added to the Event message expression field the term will appear as User001 o Several terms as one item User001 Door053 Sunday when added to the Event message expression field the terms will appear as User001 Door053 Sunday When you add several terms as one item appearing as for example User001 Door053 Sunday in the Event message expression field everything be
313. n the surveillance server itself you will be able to view the content of the special temporary database through the Ocularis Client even if the special temporary database has not been archived yet Since the special temporary database will be used for storing new recordings until the Recording Server service is restarted even though the original database may no longer be locked you may in these extremely rare situations experience that new recordings are not viewable through clients In that case restarting the On Net Surveillance Systems Inc 17 RC C User Manual Configuration amp Properties Recording Server service will help since it will force the original database to again be used for storing new recordings Configure Archiving Locations Before configuring archiving locations consider whether you want to use static or dynamic archiving paths e Static archiving paths mean that for a particular camera archiving will take place to a particular location and to that location only Static archiving paths are in principle individual for each camera but they do not have to be unique several cameras can easily use the same path if required You can configure static archiving paths for individual cameras or as part of the general Recording amp Archiving Paths properties o individual cameras In the Management Application s navigation pane expand Advanced Configuration expand Cameras and Storage Information double click the requi
314. n you select this option specify required conditions see the following e On built in motion detection Select this check box to record video in which motion is detected Unless post recording see the following is used recording will stop immediately after the last motion is detected e On event Select this check box to record video when an event occurs and until another event occurs Use of recording on event requires that events have been defined and that you select start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event Recording will begin when the start event occurs or earlier if using pre recording see the following e Stop event Select required start event Recording will end when the stop event occurs or later if using post recording see the following When the option Conditionally is selected you can store recordings from periods preceding and following detected motion and or specified events Example If you have defined that video should be stored when a door is opened being able to see what happened immediately prior to the door being opened may also be important For example you may have specified that video should be stored conditionally on event with a start event called Door Opened and a stop event called Door Closed With three second
315. nce system via e mail Pre and post alarm images should not be confused with RC C s own pre and post recording feature e RC C Log Check service Performs integrity checks on RC Clog files For more information see Overview of Logs The services by default run transparently in the background on the RC C server If required you are able to start and stop each service separately from the Management Application see Start amp Stop Services Overview of Users and Groups To get an overview of the NVR system s users expand Advanced Configuration in the Management Application s navigation pane then expand Users The term users primarily refers to users who are able to connect to the surveillance system through their clients You can configure such users in two ways e As 8 basic users authenticated by a user name password combination e As 8 Windows users authenticated based on their Windows login You can add both types of users through the Configure User Access wizard or individually see Add Basic Users and Add Windows Users By grouping users you can specify rights for all users within a ka group in one step If you have many users performing similar tasks this can save you significant amounts of work User groups are logical groups created and used for practical purposes in the Management Application only They are not in any way connected with user groups from central directory services such as for example Active Directory
316. nd cameras are online or offline Cameras and Server Are Online If cameras and server are online required information is e HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 e HardwarePort Port to use for HTTP communication with the hardware device Default is port 80 e HardwarePassword Password for the hardware device s administrator account Most organizations use their own passwords rather than device manufacturers passwords Camera and Server Are Offline If cameras and server are offline required information is e HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 e HardwareMacAddress MAC address of the hardware device Examples of valid MAC address formats 0011D81187A9 0011d81187a9 00 11 D8 11 87 A9 00 11 D8 11 87 A9 e HardwareDriverlD A numerical ID used for identifying which video device driver to use for the hardware device in question For information about how to find the right ID for your devices see Hardware Driver IDs e HardwarePort Port to use for HTTP communication with the hardware device Default is port 80 e HardwarePassword Password for the hardware device s administrator account For security reasons most organizations use their own passwords rather than device manufacturers passwords Optional Parameters You can furthermore include these optional parameters regardless whether cameras and server are online or offline e Hardw
317. nd the node for Advanced Configuration in the Navigation Pane File Services Wizards Application Sek MEEA 5 izj Surveillance Server i Wizards E Advanced Configuration ee y E lll 3 Expand the Hardware Devices node File Services Wizards Application Settings MEMA g g Surveillance Server Wizards B A Adv Fe X GA Axis 211M SG Axis 213 D Axis M1054 B C Axis P1311 Le Namen ata a T T Installation e Your devices from NetDVMS should appear If they do not appear proceed to Error Reference source not found below e Restore a Configuration Backup if Required If for some reason after installing the new software version you have lost your configuration you can easily restore your configuration provided you have followed the previous instructions Configuration is stored in a unique format in RC C 7 0 so your old configuration will have to be converted to the new format before you can use it 1 Close the Management Application if it is open 2 Stop the Recording Server Service a Right click the Recording Server icon in the Windows System Tray b Select Stop Recording Server Service Start Recording Server Service Stop Recording Server Service Show Recording Server Log File Show Image Server Log File C malm gg NA aan Alten Apaan atn Lal c The icon should now appear as 3 Make a copy of the contents of the following directory C ProgramData
318. nfiguration When using SMS notifications also keep in mind individual cameras scheduling e Delete Lets you delete a selected timer event e Add When a specific hardware input event is selected clicking Add will add a timer event to the selected hardware input event Hardware Output e Output name Specify a name for the event If you are going to make the hardware output available for manual activation in clients this is the name that client users will see Hardware output names must be unique and must not contain the following characters lt gt amp Some hardware devices only support hardware output names of a certain length and or with a certain structure Refer to the hardware device s documentation for exact details e Output connected to Lets you select which of the hardware device s output ports the output is connected to Many hardware devices only have a single output port in that case simply select Output 1 e Keep output for Lets you specify the amount of time for which the output should be applied Specify the required amount of time in either 1 10 seconds or seconds Some hardware devices are only able to apply output for a relatively short time for example for up to five seconds Refer to the documentation for the hardware device in question for exact information Tip To verify that your hardware output works click the Test Output button Language Support amp XML Encoding e Language Selec
319. nfiguration for example by clicking the Save Configuration button in the Management Application s toolbar For sessions older than the last five sessions only the latest restore point of each session is stored With the Number of old sessions to keep field you can control how many old sessions are kept When selecting to restore a configuration from a restore point the configuration from the selected restore point will be applied and used once the services are restarted see Start amp Stop Services If you have added new cameras or other devices to the system after the restore point was created they will be missing if you load the restore point This is due to the fact that they were not in the system when the restore point was created In such cases you will be notified and must decide what to do with recordings from the affected devices 1 From the Management Application s File menu select Load Configuration from Restore Point 2 Inthe left part of the Restore Points dialog select the required restore point Tip When you select a restore point you will in the right part of the dialog see information about the configuration state at the selected point in time This can help you select the best possible restore point 3 Click the Load Restore Point button 4 Ifyou are sure that you want to overwrite the current configuration with the one from the selected restore point click OK 5 Only relevant if the current configuration
320. nfiguration elsewhere You are subsequently able to import previously exported configurations e Export Configuration as Backup With this option all relevant NVR configuration files will be combined into one single file which can then be saved at a location specified by you Note that if there are unsaved changes to your configuration they will automatically be saved when you export the configuration 1 In the Management Application s File menu select Export Configuration Backup 2 Browse to the location at which you want to store the exported configuration specify a suitable file name and click Save If you intend to set up an identical version of your surveillance system elsewhere do not export your configuration as backup since this may lead to the same device information being used twice in which case clients may get the following error message Application is not able to start because two or more cameras are using the same name or id Instead export your configuration as a clone When you export as a clone the export takes into account the fact that you will not use the exact same physical cameras etc even though your new system may otherwise be identical to your existing one e Export Configuration as Clone With this option all relevant NVR configuration files will be collected and GUIDs Globally Unique Dentifiers unique 128 bit numbers used for identifying individual system components such as cameras will be mark
321. ng configuration is automatically converted to the new format if you upgrade from a previous version e Configuration restore points let you quickly return to a previous configuration state See Restore System Configuration from Restore Point e You can export and import configurations for example if installing many similar RC C systems See Export amp Import System Configuration and Import Changes to Configuration Get Your System Up and Running The following outlines the tasks typically involved in setting up a working RC C system Note that although information is presented as a checklist a completed checklist does not in itself guarantee that the system will match the exact needs of your organization To make the system match the needs of your organization it is highly recommended that you monitor and adjust the system once it is running For example it is often a very good idea to spend time on testing and adjusting the motion detection sensitivity settings for individual cameras under different physical conditions day night windy calm etc once the system is running The setup of events and associated actions typically also depends entirely on your organization s needs O Verify Initial Configuration of Cameras and other Hardware Devices Before doing anything on RC C make sure the hardware devices cameras video encoders etc you are going to use are correctly installed and configured with IP addresses passwords etc as s
322. ng the Save Configuration button in the Management Application s toolbar When a user who has been added from a local database logs in with a client the user should not specify any server name PC name or IP address as part of the user name When a user who has been added from a local database logs in with a client the user should not specify any server name PC name or IP address as part of the user name Example of a correctly specified user name USER001 Example of an incorrectly specified user name PC001 USER001 The user should of course still specify a password and any required server information Apply or Save Configuration Changes Whenever you make changes in the NVR configuration you will be asked to apply them e f you made the changes in one of the Management Application s dialogs you simply apply them by clicking OK e f you made the changes in one of the Management Application s summary tables click the Apply button below the summary table Settings Changes Owcard Applying a configuration change means that the change is stored by the RC C NVR in a restore point so that you can return to a working configuration if something goes wrong but applying a configuration change does not mean that the changes will take immediate effect on the surveillance system On Net Surveillance Systems Inc 172 RC C User Manual Configuration e To actually store your configuration change in RC C s configuration file click the Save
323. ng to the structure RecordingServerYYYYMMDD log for example RecordingServer20101231 log e Image Server service log files These files log activity on the Image Server service A new log file is created for each day the service is used You cannot disable this type of logging Image Server service log files are named according to the structure ISLog_YYYYMMDD log for example ISLog_20101231 log e Image Import service log files These files log activity regarding the Image Import service when this service is used for fetching pre alarm images and storing the fetched images in camera databases Pre alarm images is a feature available for selected cameras only it enables sending of images from immediately before an event took place from the camera to the surveillance system via e mail A new log file is created for each day the service is used You cannot disable this type of logging Image Import service log files are named according to the structure ImagelmportLog_YYYMMDD log for example ImagelmportLog20101231 log e Event log files These files log information about registered events A new log file is created for each day on which events occur You cannot disable this type of logging e Audit log files These files log Ocularis Client user activity provided audit logging is enabled A new log file is created for each day with audit logging enabled and client user activity Audit log files are named according to the structure is_auditYYYM
324. nistrator if in doubt Can add groups from Active Directory You can only add individual users from Active Directory to Active Directory also supports groups of users but you cannot add such groups to You can however group individual users in and quickly assign common user rights for all users within such groups 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups window Select Users or Groups ei Select thes object type Users Groupe of Bulin secunty pincipals From thes location Entire Directory Enter the object names to select exomoter i H i By default you will be able to make selections from your entire directory If you want to narrow this click the Select Users and Groups window s Locations button and select the location you require 2 Inthe Enter the object names to select box type the required user names then use the Check Names feature to verify that the user names you have entered are recognized Example Rich Matthew Marc Ari 3 When ready click OK 4 Specify General Access and Camera Access properties These properties will determine the rights of the user 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When a user who has been added from a
325. ns We always suggest visiting the On Net Surveillance Systems Inc website www onssi com for the most recent system performance parameters On Net Surveillance Systems Inc 1 RC C User Manual System amp Requirements Tip DirectX is a software requirement for several of the components listed in the following To check which DirectX version is installed on a computer click Start select Run and type dxdiag When you click OK the DirectX Diagnostic Tool window will open version information is displayed near the bottom of its System tab Should the server require a DirectX update the latest versions of DirectX are available from http www microsoft com downloads e RC C Server Operating System CPU RAM Network Hard Disk Type Hard Disk Space Software Microsoft Windows Server 2003 32 bit or 64 bit Windows Server 2008 R1 R2 32 bit or 64 bit Intel Pentium 4 2 4 GHz or higher Core 2 recommended Minimum 2 GB Ethernet 1 Gbit recommended E IDE PATA SATA SCSI SAS 7200 RPM or faster Minimum 1 GB free hard disk space available excluding space needed for recordings Microsoft NET 3 5 Framework Service Pack 1 or newer DirectX 9 0 Running as a 32 bit service application e Ocularis Client Operating System CPU RAM Graphics Adapter Software e NetMatrix Monitor Microsoft Windows XP Professional Windows Vista Business Ultimate Enterprise 32 bit or 64 bit
326. nse Key file into the RC C NVR Importing the file is quick and easy and it will free you from having to specify license keys manually for each hardware device later The wizard offers you four different ways of adding cameras e Express recommended Quickly scans your network for devices and helps you quickly add them to your system This method is quick and easy since it only scans for devices supporting device discovery and only on the part of your network subnet where the RC C server itself is located Device discovery is a method with which hardware devices make information about themselves available on the network Based on such information RC C can recognize relevant hardware devices on your network and thus include for example cameras but not printers in the scan To use the Express method the RC C server and your cameras must be on the same layer 2 network that is a network where all servers cameras etc can communicate without the need for a router See Add Hardware Devices Wizard Express e Advanced Scans your network for hardware devices based on your specifications regarding required IP ranges discovery methods drivers and device user names and passwords See Add Hardware Devices Wizard Advanced e Manual Lets you specify details about each hardware device separately A good choice if you only want to add a few hardware devices and you know their IP addresses required user names and passwords etc See Add
327. nse properties Restore System Configuration from a Restore Point Restore points allow you to return to a previous configuration state Each time a configuration change is applied in the Management Application either by clicking OK in a properties dialog or by clicking the Apply button in a summary pane a new restore point is created All restore points in the current and previous five sessions are stored and can be selected again A new session begins each time the Management Application is started as well as each time you save the whole configuration for example by clicking the Save Configuration button in the Management Application s toolbar For sessions older than the last five sessions only the latest restore point of each session is stored With the Number of old sessions to keep field you can control how many old sessions are kept When selecting to restore a configuration from a restore point the configuration from the selected restore point will be applied and used once the services are restarted see Start amp Stop Services If you have added new cameras or other devices to the system after the restore point was created they will be missing if you load the restore point This is due to the fact that they were not in the system when the restore point was created In such cases you will be notified and must decide what to do with recordings from the affected devices 1 From the Management Application s File menu select Lo
328. nsferred to the recorder while the Recording Server service is running The Recording Server service is automatically installed and runs in the background on the RC C surveillance system server You can manage the service through the RC C Management Application e The Image Server service Handles access to the surveillance system for users logging in with clients The Image Server service is automatically installed and runs in the background on the RC C surveillance system server You can manage the service through the Management Application e The Download Manager Lets you manage which NVR related features your organization s users will be able to access from a targeted welcome page on the surveillance system server e The Ocularis Client The Ocularis Client let users view live video play back recorded video activate output print and export evidence etc The feature rich Ocularis Client should always be downloaded and installed on remote users computers Updates On Net Surveillance Systems Inc regularly releases service updates for our products offering improved functionality and support for new devices If you are a surveillance system administrator it is recommended that you check www onssi com for updates at regular intervals in order to make sure you are using the most recent version of your surveillance software Minimum System Requirements The following are minimum system requirements for running RC C and associated applicatio
329. nter the following command to add the 3 GB switch to the current operating system boot entry BCDEDIT SET INCREASEUSERVA 3072 Where e USERVA Specifies an alternate amount of user mode virtual address space for operating systems e 3072 Specifies 3 GB 3072 MB A reboot is required after editing the boot configuration data store for the changes to take effect Removing the 3GB Switch Select Start gt All Programs gt Accessories right click Command Prompt and select Run as administrator then click Continue Enter the following command to remove the 3 GB switch from the current operating system boot entry BCDEDIT DELETEVALUE INCREASEUSERVA A reboot is required after editing the boot configuration data store for the changes to take effect Protect Recording Databases from Corruption In the Management Application you can select which action to take if a camera database becomes corrupted The actions include several database repair options While being able to select such actions is highly valuable it is of course even better to take steps to ensure that your camera databases do not become corrupted e Power Outages Use a UPS The single biggest reason for corrupt databases is the surveillance system server being shut down abruptly without files being saved and without the operating system being closed down properly This may happen due to power outages due to somebody accidentally pulling out the server s power cable or similar
330. nting the specific components of the new system After GUIDs have been marked for replacement the configuration files will be combined into one single file which can then be saved at a location specified by you Note that if there are unsaved changes to your configuration they will automatically be saved when you export the configuration 1 In the Management Application s File menu select Export Configuration Clone 2 Browse to the location at which you want to store the exported configuration specify a suitable file name and click Save Import Previously Exported Configuration The same import method is used regardless of whether the configuration was exported as a backup or a clone 1 Inthe Management Application s File menu select Import Configuration 2 Browse to the location from which you want to import the configuration select the required configuration file and click Open 3 Only relevant if the system into which you import the configuration contains devices cameras etc which are not present in the imported configuration You will be asked whether you want to delete or keep recordings from affected devices If Keeping the recordings note that they will not be accessible until you add the affected devices to the NVR again Select the required option and click OK 4 Inthe Management Application s navigation pane expand Advanced Configuration and select Services 5 For the Recording Server and Image Server service
331. ntion time is the total of recording time plus archiving time If specified as for example RetentionTime7 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegLiveFrameRate optional number Required MJPEG live frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If specified as for example MjpegLiveFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegRecordingFrameRate optional number Required MJPEG recording frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If you need to specify a value which includes a decimal separator use the full stop character example 7 62 If specified as for example MjpegRecordingFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionSensitivity optional number A value between 0 256 corresponds to using the Sensitivity slider when configuring motion detection settings in the Management Application If specified as for example MotionSensitivity1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectionThreshold optional number A value between 0 10000 corresponds
332. o Yes date and time from the camera will be included in video Note however that cameras are separate units which may have separate timing devices power supplies etc Camera time and system time may therefore not correspond fully and this may occasionally lead to confusion As all frames are time stamped by upon reception and exact date and time information for each image is thus already known it is recommended that the setting is set to No Tip For consistent time synchronization you may if supported by the camera automatically synchronize camera and system time through a time server The last page of the Replace Hardware wizard lets you decide what to do with the camera and the database containing recordings from the camera attached to the old hardware device For multi camera devices such as video encoders you must decide what to do for each video channel on the new hardware device The table in the left side of the wizard page lists available video channels on the new hardware device For a regular single camera hardware device there will only be one video channel For video encoders there will typically be several video channels 1 For each video channel use the table s Inherit column to select which camera from the old hardware device should be inherited by the new hardware device 2 Then decide what to do with camera databases You have three options e Inherit existing database s The cameras you selected to be inherite
333. o enable manual recording and specify further details e Default duration of manual recording Period of time in seconds during which user driven recording will take place Default duration is 300 seconds corresponding to five minutes e Maximum duration of manual recording Maximum allowed period of time for user driven recording This maximum is not relevant in connection with manual recording started from the Ocularis Client since such manual recording will always take place for a fixed time In some installations it is however also possible to combine manual recording with third party applications if integrating these with the NVR through an API or similar and in such cases specifying a maximum duration may be relevant If you are simply using manual recording in connection with the Ocularis Client disregard this property Master and Slave Properties Masier Server Properties e Enable as master server Select to enable as master server e Add Lets you add slave servers On Net Surveillance Systems Inc 130 RC C User Manual Configuration Slave Server Properties e Address P address of the slave server e Port Port number of the slave server e Delete Lets you remove a slave server from the list of slave servers Select the slave server in the list and click the Delete button When selecting Master Server the Delete button is disabled and the Add button is enabled provided that Enable as master server is selected
334. o select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several user names separate each name with a semicolon Example Rich Matthew Marc Ari 3 When ready click OK The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing check box is cleared When ready click OK and close the window 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups dialog Seloct Users or Groups Axi Frec the copet hype Utet ot Groups Quec Types Erom this location Enter the object names to select faxomoie i m Advanced Cancel Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names to select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several user names separate each name with a se
335. o take place at particular times up to 24 times per day This way you can proactively archive recordings so databases will never become full By using archiving you will also be able to back up archived records on backup media of your choice using your preferred backup software e How Archiving Works For each camera the contents of the camera database will be moved to a default archiving folder called Archives This will happen automatically if a database becomes full and one or more times every day depending on your archiving settings By default the default archiving folder is located on the RC C server in C VideoData In the archiving folder separate subfolders for storing archives for each camera are automatically created These subfolders are named after the MAC address of the hardware device to which the camera is connected Since you can keep archives spanning many days of recordings and since archiving may take place several times per day further subfolders named after the archiving date and time are also automatically created The subfolders will be named according to the following structure Archives CameraMACAddress_VideoEncoderChannel DateAndTime On Net Surveillance Systems Inc 173 RC C User Manual Configuration Example With the default archiving folder located under C VideoData video from an archiving taking place at 23 15 on 31st December 2010 for a camera attached to channel 2 on a video encoder
336. oblem since the NVR automatically archives data if the database becomes full However there is likely to be a greater need for archiving space if you record audio On Net Surveillance Systems Inc 30 RC C User Manual General Recording amp Storage Properties Example If using MPEG4 each one second video GOP Group Of Pictures will be stored in one record in the database Each second of audio will also be stored in one record in the database When this is the case the database s video storage capacity will be halved because half of the database s records will be used for storing audio Consequently the database will run full sooner and automatic archiving will take place more often than if you were only recording video Example If using MJPEG audio is stored in one record for every JPEG for as long as the audio block size does not exceed the time between the JPEGs The database s video storage capacity can thus in extreme cases be halved because half of the database s records will be used for storing audio If using very high frame rates where there is less time between each JPEG a smaller portion of the database will be used for storing audio records and consequently a larger portion will be available for storing video Anyway the database will run full sooner and automatic archiving will take place more often than if you were only recording video Above examples are simplified the exact available video storage capacity wil
337. of events will still be sent out whenever the events occur Examples If specifying 5 a minimum of five minutes will pass between the sending of each motion or database related e mail notification per camera even if motion or database events are detected in between If specifying 0 e mail notifications will be sent each time motion or database events are detected potentially resulting in a very large number of e mail notifications being sent If using the value 0 you should therefore consider cameras motion detection sensitivity settings Sender e mail address Type the e mail address you wish to appear as the sender of the e mail notification Outgoing mail SMTP server name Type the name of the SMTP Simple Mail Transfer Protocol server which will be used for sending the e mail notifications Compared with other mail transfer methods SMTP has the advantage that you will avoid automatically triggered warnings from your e mail client Such warnings may otherwise inform you that your e mail client is trying to automatically send e mail messages on your behalf TLS Transport Layer Security and it s predecessor SSL Secure Socket Layer is not supported if the sender belongs on a server that requires TLS or SSL e mail notifications will not work properly Also you may be required to disable any e mail scanners that could prevent the application sending the e mail notifications Server requires login Select check box if a user name and p
338. ofile 1 Inthe field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 wal a On Net Surveillance Systems Inc 149 RC C User Manual Configuration e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e Asan alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message Storage Information The storage usage summary information lets you view how
339. ommas semicolons or tabs but cannot be mixed e All lines must contain valid values pay special attention to the fact that camera names user names etc must be unique and must not contain any of the following special characters lt gt amp 210 e There is no fixed order of values and optional parameters can be omitted entirely e Boolean fields are considered true unless set to 0 false or no e Lines containing only separators are ignored e Empty lines are ignored e Even though the CSV file format is generally ASCII only Unicode identifiers are allowed even without Unicode identifiers the entire file or even individual characters are allowed to be Unicode strings If you need to include separator characters in a value for example if a camera name is Reception Camera 1 you can encapsulate the value in quotes to indicate that the separator should not be interpreted as separating values in the file Such quote encapsulated values are interpreted as they appear If a separator a quote or a space is needed in a value the whole value has to be encapsulated in quotes Leading and trailing spaces outside the quote encapsulated value are removed while spaces inside the quote encapsulated value are maintained No characters except spaces are allowed outside the quote encapsulated value A double quote inside a quote encapsulated value is interpreted as a single quote Nested quotes quotes inside quotes are not allowed
340. on The table in the lower half of the dialog contains a row for each video channel on the hardware device First row from the top corresponds to video channel 1 second row from the top corresponds to video channel 2 etc e Name Name of the camera attached to the video channel in question Type Lets you select whether the camera on the selected camera channel is fixed or moveable On Net Surveillance Systems Inc 137 RC C User Manual Configuration o Fixed Camera is a regular camera mounted in a fixed position o Moveable Camera is a PTZ camera e Port Available only if Moveable is selected in the Type column Lets you select which COM port on the video encoder to use for controlling the PTZ camera e Port Address Available only if Moveable is selected in the Type column Lets you specify port address of the camera The port address will normally be 7 If using daisy chained PTZ cameras the port address will identify each of them and you should verify your settings with those recommended in the documentation for the camera PTZ on Event PTZ related properties are only available when you are dealing with a PTZ Pan Tilt Zoom camera When a PTZ camera supports preset positions it is possible to make the PTZ camera automatically go to a particular preset position when a particular event occurs When associating events with preset positions on a PTZ camera you are able to select between all events defined on your system
341. on for archiving e Configuration path The path by default used for storing the RC C system s configuration On Net Surveillance Systems Inc 179 RC C User Manual Configuration To change any of the default file paths 1 If changing the configuration path stop all services This step is not necessary if changing the default recording or archiving path 2 Inthe Management Application s menu bar select Application Settings gt Default File Paths 3 You can now overwrite required paths Alternatively click the browse button next to the required field and browse to the required location For the default recording path you are only able to specify a path to a folder on a ocal drive If using a network drive it would not be possible to save recordings if the network drive became unavailable If you change the default recording or archiving paths and there are existing recordings at the old locations you will be asked whether you want to move the recordings to the new locations recommended leave them at the old locations or delete them 4 Click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 6 Restart all services Configure E mail Notifications With e mail notifications you and your colleagues can instantly get notified when your surveillance system requires attention The NVR can automatically send e mail notifications to one or more r
342. on s oldest data from the camera in question will be deleted until there is sufficient free space for the new data to be archived In short When estimating storage capacity required for archiving consider your organization s needs then plan for worst case rather than best case scenarios Tip OnSSI s Storage Calculator found in the Support section of the OnSSI website www onssi com can help you easily determine the storage capacity required for your surveillance system e Automatic Response if Running Out of Disk Space The archiving function can automatically respond to the threat of running out of disk space Two scenarios can occur depending on whether the camera database drive is different from or identical to the archiving drive Different Drives Automatic Archiving if Database Drive Runs Out of Disk Space In the case where the RC C server is running out of disk space and o the archiving drive is different from the camera database drive and archiving has not taken place within the last hour archiving will automatically begin in an attempt to free up disk space This will happen regardless of any archiving schedules The server is considered to be running out of disk space if o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of
343. onfigure video and recording for specific cameras properties include event notification On Net Surveillance Systems Inc 35 RC C User Manual Camera Specific Properties What Is an Event Notification Event notification lets you inform Ocularis Client and Ocularis Client Lite users that an event has occurred on the RC C system Event notification can be valuable for client users as they will be able to quickly detect that an event has occurred even though their focus was perhaps on something else the moment the event occurred Tip Even though event notification is configured separately for each camera you can select between all events on the NVR regardless whether events are manual generic or originate on another hardware device than the camera itself In the Ocularis Client event notification is given by a yellow indicator which lights up when a relevant event has taken place An optional sound on event notification can furthermore be configured in the Ocularis Administrator when using Ocularis Base In Ocularis Client three differently colored indicators Rear Hallway Camera 1 are available for each camera e The yellow event indicator When event notification is used for a camera the yellow indicator will light up when a relevant event has occurred e Ared recording indicator lights up when recording is taking place e Ablue motion indicator lights up when motion is occurring on the camera feed
344. onnected to Lets you select which of the hardware device s output ports the output is connected to Many hardware devices only have a single output port in that case simply select Output 1 e Keep output for Lets you specify the amount of time for which the output should be applied Specify the required amount of time in either 1 10 seconds or seconds Some hardware devices are only able to apply output for a relatively short time for example for up to five seconds Refer to the documentation for the hardware device in question for exact information Tip To verify that your hardware output works click the Test Output button On Net Surveillance Systems Inc 57 RC C User Manual Hardware Devices Hardware Devices Add Hardware Devices You add cameras and other hardware devices such as video encoders DVRs etc to your surveillance system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well You are allowed to use up to 64 cameras per RC C server Note that if required it is possible to add more cameras than you are allowed to use If using video encoder devices on your system keep in mind that many video encoder devices have more than one camera connected to them For example a fully used four port video encoder will count as four cameras Before you begin using the wizard it is highly recommended that you import your Device Lice
345. ony SNC CS10 88 Sony SNC CS11 88 Sony SNC CS20 216 Sony SNC CS50 125 Sony SNC CM120 215 Sony SNC DF40 88 Sony SNC DF50 178 Sony SNC DF70 88 Sony SNC DF80 178 Sony SNC DF85 178 Sony SNC DM110 215 Sony SNC DM160 215 Sony SNC DS10 216 Sony SNC DS60 216 Sony SNC M1 SNC M1W 102 Sony SNC M3 SNC M3W 102 Sony SNC P1 88 Sony SNC P5 98 Sony SNC RX530 124 Sony SNC RX550 124 Sony SNC RX570 124 Sony SNC RZ25 89 Sony SNC RZ30 52 Sony SNC RZ30 2 52 Sony SNC RZ50 128 Sony SNC Z20 53 Sony SNC VL10 51 Sony SNT V304 9 Sony SNT V501 82 Sony SNT V704 113 Speco Technologies SIPB1 SIPB2 501 Speco Technologies SIPB3 SIPB4 501 Speco Technologies SIPMPT5 501 Speco Technologies SIPSD10X 501 StarDot NetCam XL 186 StarDot NetCam SC 5 MP 186 Toshiba IK WBO1A 115 Toshiba IK WB02A 114 Toshiba IK WB15A 115 Toshiba IK WB11A 59 Toshiba IK WB21A 115 Toshiba IK WD01A 508 Toshiba IK WRO1A 114 Toshiba Teli CI7010 181 Toshiba Teli Cl8110D 263 On Net Surveillance Systems Inc Toshiba Teli Cl8210D 250 Toshiba Teli EJ7000 170 UDP IPC1100 231 UDP IPC3100 231 UDP IPC3500 231 UDP IPC4100 229 UDP IPC4500 229 UDP NVE12K 230 UDP NVE40K 230 UDP NVE100 232 UDP NVE1000 233 UDP NVE2000 234 UDP NVE4000 230 Universal driver 400 Universal driver 16 Chnl 401 Vantage VIPC1100E 501 Vantage VIPC1311EP 501 Vantage VIPC1431EP 501 Vantage VIPC3100E 501 Vantage VIPC3211EP 501 Vantage VIPC3311EP 501 Vantage VIPC5300 501 Van
346. op Recording Server Service 3 The icon in the notification area changes to red Ha e Open the Management Application 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Open Management Application e Monitor System Status By right clicking the notification area s Recording Server icon and then selecting Show System Status you get access to the Status window Tip Alternatively simply double click the icon to open the Status window The Status window lets you view the status of the image server s and connected cameras The status of each server camera is indicated by a color e Green indicates that the server or camera is running correctly e Gray indicates that the camera not the server is not running Typically a camera will be indicated in gray in the following situations o the camera is not online as defined in the camera s online period schedule o the Recording Server service has been stopped e Red indicates that the server or camera is not running This may because it has been unplugged or due to a network or hardware error Errors are listed in the Recording Server log file On Net Surveillance Systems Inc 108 RC C User Manual Recording Server Manager Place your mouse pointer over a camera in the status window to view details about the camera in question The information updates approximately every 10 seconds erat ad server East Entrance Cam
347. opping recording on cameras switching to a particular video frame rate triggering e mail or SMS notifications making PTZ cameras move to specific preset positions etc Events can also be used for activating hardware output Hardware output units can be attached to output ports on many hardware devices allowing you to activate lights sirens etc from the NVR Such hardware output can be activated automatically by events or manually from clients e Event Types e Hardware input events Events based on input from hardware input units attached to hardware devices are called hardware input events Some hardware devices have their own capabilities for detecting motion for detecting moving and or static objects etc configured in the hardware devices own software typically by accessing a browser based configuration interface on the hardware device s IP address When this is the case RC C considers such detections as input from the hardware and you can use such detections as input events as well On Net Surveillance Systems Inc 192 RC C User Manual Configuration Lastly hardware input events can be based on the NVR detecting motion in video from a camera based on the NVR s motion detection settings This type of hardware input events is also called system motion detection events or VMD Video Motion Detection events In some NVRs VMD events are an event type of their own with the RC C recording component they are simply considered a
348. or even individual characters are allowed to be Unicode strings If you need to include separator characters in a value for example if a camera name is Reception Camera 1 you can encapsulate the value in quotes to indicate that the separator should not be interpreted as separating values in the file Such quote encapsulated values are interpreted as they appear If a separator a quote or a space is needed in a value the whole value has to be encapsulated in quotes Leading and trailing spaces outside the quote encapsulated value are removed while spaces inside the quote encapsulated value are maintained No characters except spaces are allowed outside the quote encapsulated value A double quote inside a quote encapsulated value is interpreted as a single quote Nested quotes quotes inside quotes are not allowed Some examples using semicolon as the separator e camera is interpreted as camera e cam era is interpreted as cam era e camera is interpreted as camera e is interpreted as an empty string e 5 cam era is interpreted as cam era where is not part of the interpretation but only used to show the start and end of the interpretation e camera is not valid as there are characters outside the quote encapsulated value e cam era is not valid as the two quotes are separated with a space and quotes cannot be nested e cam er a is not valid as you cannot nest quotes e
349. or to the door being opened may also be important For example you may have specified that video should be stored conditionally on event with a start event called Door Opened and a stop event called Door Closed With three seconds of pre recording video will be recorded from three seconds before Door Opened occurs and until Door Closed occurs e Enable pre recording Available only when the option Conditional is selected Specify the number of seconds for which you want to record video from before recording start conditions that is motion or start event are met Enable post recording Available only when the option Conditional is selected Specify the number of seconds for which you want to record video after recording stop conditions that is motion end or stop event are met How does pre and post recording work The NVR receives video in a continuous stream from the camera whenever the camera is enabled and scheduled to be online This is what lets you view live video but it also means that the NVR can easily store received video for a number of seconds in its memory a k a buffering If it turns out that the buffered video is needed for pre or post recording it is automatically appended to the recording If not it is simply discarded Recording amp Archiving Paths e Recording path Path to the folder in which the camera s database should be stored Default is C VideoData To browse for another folder click the browse button next
350. orage capacity can thus in extreme cases be halved because half of the database s records will be used for storing audio If using very high frame rates where there is less time between each JPEG a smaller portion of the database will be used for storing audio records and consequently a larger portion will be available for storing video Anyway the database will run full sooner and automatic archiving will take place more often than if you were only recording video Above examples are simplified the exact available video storage capacity will also depend on GOP JPEG and audio kilobyte size Audio Selection With a default microphone and or speaker selected for a camera audio from the microphone and or speaker will automatically be used when video from the camera is viewed Note that all of the Audio Selection properties can also be specified individually for each camera Template The template can help you configure similar properties quickly For instance if you have 8 cameras and you want a particular default microphone for all of them Instead of having to enter the same piece of information eight times you can simply enter it once in the template and then apply the template to the 8 cameras with only two clicks Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in th
351. ording Server service by allowing it to exceed the previous 2 GB virtual memory limit making it possible for it to use up to 3 GB of memory The change in Windows configuration is known as 3 GB switching e When Is 3 GB Switching Relevant For very large installations and or for installations with many megapixel cameras it can be relevant to change Windows settings so that only 1 GB of virtual memory is reserved for the operating system kernel leaving 3 GB for running processes If using Windows default setting with only 2 GB virtual memory reserved for running processes it has been observed that the Recording Server service in very large installations of RC C may e Behave erratically if getting very close to the 2 GB virtual memory limit Symptoms can include database corruption and client server or camera server communication errors e Become unstable and crash if exceeding the 2 GB virtual memory limit During such crashes the code managing the surveillance system databases is not closed properly and databases will become corrupt In case of a crash Windows will normally restart the Recording Server service However when the Recording Server service is restarted one of its first tasks will be to repair the databases The database repair process can in some cases take several hours depending on the amount of data in the corrupted databases If your RC C installation is very large and or features many megapixel cameras 3 GB swi
352. ormat o Database Export Ability to export evidence in database format Sequences Ability to use the Sequences feature when playing back video from the selected camera o Smart Search Ability to use the smart search feature with which users can search for motion in one or more selected areas of images from the selected camera o Audio Ability to listen to recorded audio from microphones related to the selected camera s Why can I not select certain features Typically because the selected camera does not support the features For example you can only select PTZ related features if the camera is a PTZ camera Also some of the features depend on the user s group s General Access properties For example in order have access to PTZ or output features the user group must have access to viewing live video in order to use AVI JPEG export the user group must have access to playing back recorded video Why are some feature check boxes filled with squares Square filled check boxes can appear in the lower part of the window if you have selected several cameras and a feature applies for some but not all of the cameras Example For camera A you have selected that use of the Events is allowed for camera B it is not allowed If you select both camera A and camera B in the list the Events check box in the lower part of the window will be square filled Another example Camera C is a PTZ camera for which you have allowed the PTZ preset positions fea
353. ormation about one hardware device only A minimum of information is always required for each hardware device On Net Surveillance Systems Inc 87 RC C User Manual System Restoration amp Migration HardwareOldMacAddress The MAC address of the hardware device used in the template configuration Required format 12 hex characters without spaces or six groups of two hex characters separated with dashes or colons You can furthermore include these optional parameters HardwareNewMacAddress The MAC address of the new hardware device to be used in the real configuration Required format 12 hex characters without spaces or six groups of two hex characters separated with dashes or colons HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 HardwareUsername User name for hardware device s administrator account In the extremely rare cases where a particular user name has previously been required for a device but you now want the user name to be lt blank gt you cannot use the CSV file to specify lt blank gt The reason is that no information is interpreted as leave the user name as it currently is If you need the new user name to be lt blank gt you should not change it through the CCV file Instead change it as part of the hardware device s Network Device Type amp License properties after you have imported the other changes through the CSV file HardwarePassword Passwor
354. otek SD7151 338 Vivotek SD7313 338 Vivotek SD7323 338 Vivotek VS2101 58 Vivotek VS2402 68 Vivotek VS2403 0 Vivotek VS3100 97 107 Vivotek VS3102 97 107 Vivotek VS7100 251 WebEye E10 50 Xview AP 400 Linudix 81 Drivers 104 RC C User Manual Clients amp Ancillary Applications Clients amp Ancillary Applications Ocularis Client Users can get client access to the RC C surveillance system by using Ocularis Client Example Ocularis Client e With the Ocularis Client users Are provided with an Alert Manager to handle alerts received May classify and categorize alerts for incident case assignment May bookmark video clips for easy retrieval and sharing May manage their security environment by the viewing graphic maps of their site or campus May configure and use a Video Wall The Ocularis Client is accessed by logging into Ocularis Base in order to access NVR video On Net Surveillance Systems Inc 105 RC C User Manual Clients amp Ancillary Applications NVR Download Manager Using the NVR Download Manager The NVR Download Manager lets you manage which RC C related features your organization s users will be able to access from a targeted welcome page on the surveillance system server You access the NVR Download Manager from Windows Start menu Select All Programs gt NVR Download Manager e Examples of User Accessible Features e The Ocularis Client With a browser users connect to the surv
355. ources You add cameras and other hardware devices such as video encoders DVRs etc to the system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well When managing microphones and speakers it is important to remember the basic concepts e Microphones are attached to hardware devices and are typically physically located next to cameras They generally record what people near a camera are saying Operators with the necessary rights can then listen to these recordings through their Ocularis Client provided the computer running the Ocularis Client has speakers attached It is only possible to have one microphone enabled at a time e Speakers are also attached to devices and also typically physically located next to cameras They can transmit information to people near a camera Operators with the necessary rights can talk through such speakers using their Ocularis Client provided the computer running the Ocularis Client has a microphone attached Example An elevator is stuck Through a camera mounted in the elevator Ocularis Client operators can see that there is a person in the elevator A microphone attached to the camera records that the person says The elevator is stuck please help me out Through a speaker attached to the camera operators can tell the person that Help is on its way you should be out in less than fifteen minu
356. out of disk space if the remaining available disk space went below 525 MB 225 MB plus 30 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 15 disk space left 2 If moving archives is not possible RC C will attempt to delete the oldest archives This will happen if o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 10 disk space left IMPORTANT You will lose data from the archives being deleted 2 Ultimately if there are no archives to delete RC C will attempt to resize camera databases by deleting their oldest recordings This will happen if o there is less than 5 disk space left and the available disk space goes below 20 GB plus 1 GB per camera or o the available disk space goes below 75 MB plus 10 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 175 MB 75 MB
357. ove Programs window s list of currently installed programs select the entry not the system entry and click the Remove button On Net Surveillance Systems Inc 112 RC C User Manual Removal 4 You will be asked to confirm that you want to remove If you are sure that you want to remove the software click OK e Ifa Status Information window appears on your screen during installation simply click its OK button the window simply provides a summary of what has been removed 5 Click Finish Remove Video Device Drivers Video device drivers are small programs used for controlling communicating with the camera devices connected to an system To remove the video device drivers do the following 1 Open Windows Control Panel and select Add or Remove Programs 2 Inthe Add or Remove Programs window select the Video Device Pack Vx x entry where x x indicates the version number and click the Remove button 3 You will be asked to confirm that you want to remove the video device drivers If you are sure click OK On Net Surveillance Systems Inc 113 RC C User Manual Clients Clients Typically you download the Ocularis Client from the surveillance system server then install it on your computer see Install Ocularis Client from Server Alternatively your surveillance system administrator may ask you to install the Ocularis Client from a DVD 1 Verify that your computer meets the Ocularis Client s minimum syste
358. own and to the left Moves the PTZ camera down Moves the PTZ camera down and to the right Zooms out one zoom level per click Zooms in one zoom level per click PORK emee e Import Refresh Only available when you have selected PTZ type 2 or 3 Lets you import already defined preset positions from the camera s memory for use with the NVR If you have already imported preset positions this way and preset positions have since then been added or changed on the camera you can use this button to refresh the imported preset positions On Net Surveillance Systems Inc 142 RC C User Manual Configuration e Add New Only available when you have selected PTZ type 1 When you have move the camera to a required position using the controls in the upper half of the window type a name for the position in the blank field then click the button to add the position to the list of defined preset positions Remember that names of preset positions must contain only the characters A Z a z and the digits 0 9 e Set New Position Only available when you have selected PTZ type 1 or 3 Lets you change an already defined preset position In the list select the preset position you want to change Then move the camera to the new required position using the controls in the upper half of the window Then click the button to overwrite the old position with the new one e Delete Only available when you have selected PTZ type 1 or 3 Lets you delete an alrea
359. pecified by the manufacturers Such initial configuration is required in order to be able to connect the devices to the network and RC C 0O Register Your RC C Software and Get DLKs You must register your software and get a Device License Key DLK for every device cameras etc you are going to use on your RC C system Upon request all your DLKs are sent to you as a single dlk file attached to an e mail e Go to www onssi com and click the Device Registration link in the Support section On Net Surveillance Systems Inc 9 RC C User Manual Getting Started e Fill out the Software Registration and Device License Keys form e Click Send e When processed by OnSSI you will receive an email with an attachment Detach this dlk file and prepare to import it into RC C O Install the Recording Component RC C See Install Surveillance Server Software If upgrading an existing version of RC C see Upgrade from a Previous Version O Open the Management Application See Access the Management Application Import Your DLKs Now it is time to import the Device License Keys into RC C see Import DLKs Device License Keys Add Hardware Devices in RC C RC C can quickly scan your network for relevant hardware devices cameras video encoders etc and add them to your system See Add Hardware Devices Oo oO Configure Cameras in RC C You can specify a wide variety of settings for each camera connected to your RC C system Settings in
360. pecify one time limit the retention time You specify retention time as part of the general Recording amp Archiving Paths properties Scheduled archiving is possible up to 24 times per day In the following topics archiving is explained in detail If you want to configure archiving immediately see Configure Archiving Locations and Configure Archiving Schedules e Benefits of Archiving With archiving recordings are moved from their standard location to another location the archiving location With archiving the amount of recordings you are able to store is limited only by the available hardware storage capacity By default recordings are stored in RC C s database for each camera The database for each camera is capable of containing a maximum of 600000 records or 40 GB However the maximum size of a database is not in itself very important If a database for a camera becomes full its content will automatically be archived freeing up space in the database Having sufficient archiving space is more important see Storage Capacity Required for Archiving in the following In addition to automatic archiving when a database becomes full you can schedule archiving to take place at particular times up to 24 times per day This way you can proactively archive recordings so databases will never become full By using archiving you will also be able to back up archived records on backup media of your choice using your preferred backup softw
361. periods However archiving failures are considered to be so serious that if enabled e mail and SMS notifications regarding archiving failures are sent regardless of schedules Audio With a default microphone and or a speaker selected for a camera audio from the microphone and or a speaker will automatically be used when video from the camera is viewed If a microphone and or a speaker is attached to the same hardware device as the camera that microphone speaker will be the camera s default microphone speaker if you do not select otherwise Tip Note that you can select a microphone and or a speaker attached to another hardware device than the selected camera itself e Default microphone Select required microphone e Default speaker Select required speaker The ability to select a default microphone and or a speaker for the camera requires that at least one microphone and or speaker has been attached to a hardware device on the surveillance system Audio Recording When you configure video and recording for specific cameras you can determine whether audio should be recorded or not Your choice will apply for all cameras on the system On Net Surveillance Systems Inc 115 RC C User Manual Configuration Always Always record audio on all applicable cameras Never Never record audio on any cameras Note that even though audio is never recorded it will still be possible to listen to live audio in the Ocularis Client If
362. plus 10 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 5 disk space left IMPORTANT You will lose the data deleted as part of the database resizing process When the recording server is restarted upon such database resizing the original database sizes will be used You should therefore make sure the drive size problem is solved or adjust camera database sizes to reflect the altered drive size Tip Should the database resizing procedure take place you will be informed on screen in the Ocularis Client in log files and if set up through an e mail and or SMS notification 3 First RC C will attempt to delete archives This will happen if o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 10 disk space left IMPORTANT You will lose data from the archives being deleted 2 Ultimately if there are no archives to delete RC C will attempt to resize camera datab
363. point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately On Net Surveillance Systems Inc 148 RC C User Manual Configuration e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 aah e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specified in increments of five minutes You cannot specify a period shorter than five minutes and you can only use times like 12 00 12 05 12 10 12 15 etc If you specify a time outside of the five minute intervals such as 12 13 you will get an error message Speaker Properties When you configure speakers properties are limited to e Enabled Speakers are enabled by default meaning that what is transmitted through the speakers is transferred to the NVR If required you can disable an individual speaker in which case it will not be possible to say anything through the speaker e Speaker name Name of the speaker as it will appear in the Management Application as well as in
364. ppear If a separator a quote or a space is needed in a value the whole value has to be encapsulated in quotes Leading and trailing spaces outside the quote encapsulated value are removed while spaces inside the quote encapsulated value are maintained No characters except spaces are allowed outside the quote encapsulated value A double quote inside a quote encapsulated value is interpreted as a single quote Nested quotes quotes inside quotes are not allowed Some examples using semicolon as the separator e camera is interpreted as camera e cam era is interpreted as cam era m e camera is interpreted as camera e is interpreted as an empty string e u cam era is interpreted as cam era where is not part of the interpretation but only used to show the start and end of the interpretation e camera is not valid as there are characters outside the quote encapsulated value e cam era is not valid as the two quotes are separated with a space and quotes cannot be nested e cam er a is not valid as you cannot nest quotes e cam era is not valid as there are characters outside the quotes On Net Surveillance Systems Inc 155 RC C User Manual Configuration Add Hardware Devices Wizard Manual Method The Manual option lets you specify details about each hardware device separately A good choice if you only want to add a few hardware devices and you know their IP addresse
365. quickly For examples you have 50 cameras and you want to change the online schedule profile for all of them Instead of having to select the same 50 times you can simply enter them once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name of each camera as it will appear in the Management Application as well as in clients e Online Lets you select the required profile for example Always on for the online schedule for the camera s in question Tip If you lack a suitable profile use the New schedule profile feature described in the following to configure one This applies for the other schedule types as well e Speedup Lets you select the required profile for the speedup schedule for the camera s in question e E mail Lets you select the required profile for the e mail notification schedule for the camera s in question e SMS Lets you select the required profile for the SMS mobile phone text message notification schedule for the camera s in question e PTZ Patrolling Only available for PTZ Pan Tilt Zoom cameras with patrolling the continuous movement of a PTZ camera between a number of preset positions Lets you se
366. r configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add a Generic Event The RC C NVR is able to analyze received TCP and or UDP data packages and automatically trigger events when specified criteria are met This way you can easily integrate your surveillance system with a very wide range of external sources for example access control systems alarm systems etc Events based on the analysis of received TCP and or UDP packets are called generic events 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Generic Events and select Add New Generic Event 2 Inthe Generic Event Properties window click the Add button and specify required properties When ready click OK or click the Add button to add a timer event to the event you have just created 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Test a Generic Event Once you have added a generic event a quick and easy way to test your generic event is to first set up an event notification and then use Telnet to send a small amount of data which will trigger the generic event and in turn the event notification What is Telnet Telnet is a terminal emulation program used on TCP IP networks With Telnet you can connect to a server from a computer on the network and execute commands through Telne
367. r event occurs or within a certain period of time All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Video Recording properties can also be specified individually for each camera e Template The template can help you configure similar properties quickly For example you have 50 cameras and you want 10 seconds of pre recording on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp e Record on Lets you select under which conditions video from the camera should be recorded On Net Surveillance Systems Inc 25 RC C User Manual General Recording amp Storage Properties o Always Record whenever the camera is enabled and scheduled to be online the latter allows for time based r
368. r if using pre recording see the following e Stop Event Select required stop event Recording will end when the stop event occurs or later if using post recording see the following e Pre recording You can store recordings from periods preceding detected motion and or start events Select check box to enable this feature Remember to specify required number of seconds in the neighboring column How does pre and post recording work The NVR receives video in a continuous stream from the camera whenever the camera is enabled and scheduled to be online This is what lets you view live video but it also means that the NVR can easily store received video for a number of seconds in its memory a k a buffering If it turns out that the buffered video is needed for pre or post recording it is automatically appended to the recording If not it is simply discarded On Net Surveillance Systems Inc 151 RC C User Manual Configuration e Seconds of pre recording Specify the number of seconds for which you want to record video from before recording start conditions that is motion or start event are met Usually only some seconds of pre recording is required but you can specify up to 65535 seconds of pre recording corresponding to 18 hours 12 minutes and 15 seconds However if specifying a very long pre recording time you can potentially run into a scenario where your pre recording time spans scheduled or unscheduled archiving times Th
369. r name to be lt blank gt you cannot use the CSV file to specify lt blank gt The reason is that no information is interpreted as leave the user name as it currently is If you need the new user name to be lt blank gt you should not change it through the CCV file Instead change it as part of the hardware device s Network Device Type amp License properties after you have imported the other changes through the CSV file e HardwarePassword Password for hardware device s administrator account In the extremely rare cases where a particular password has previously been required for a device but you now want the password to be lt blank gt you cannot use the CSV file to specify lt blank gt The reason is that no information is interpreted as leave the password as it currently is If you need the new password to be lt blank gt you should not change it through the CSV file Instead change it as part of the hardware device s Network Device Type amp License properties after you have imported the other changes through the CSV file e DLK Device License Key DLK required in order to use the hardware device with the NVR e HardwareDeviceName Name of the hardware device Name must unique and must not contain any of the following special characters lt gt amp e CameraName number Name of the camera Must appear as CameraName1 CameraNamed2 etc in the header line since a hardware device can potentially h
370. r names separate each name with a semicolon Example Rich Matthew Marc Ari 3 When ready click OK The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing check box is cleared When ready click OK and close the window 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups dialog Select Users or Groups Ax Select thes object Ippe Users ot Groupe Obiect Types Erom thes locator MM0I232 Locations Erter the object names to select omc Advance Cancel On Net Surveillance Systems Inc 96 RC C User Manual Users Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names to select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several user names separate each name with a semicolon Example Rich Matthew Marc Ari 3 When ready click OK
371. r wants to share important video and sends it from an Ocularis Client session or from a custom made web page to the required NetMatrix recipient e Automatic triggering Video is sent to the required NetMatrix recipient automatically when a predefined event occurs for example when a door sensor detects that a door is opened or when the surveillance system detects motion in the video from a camera e Configure NetMatrix for Manual Video Sharing 1 In the Management Application s Navigation pane expand Advanced Configuration right click NetMatrix and select Properties 2 Enable the use of NetMatrix by selecting the Enable NetMatrix check box 3 Specify required properties When ready click OK or select NetMatrix Event Control to configure automatically triggered video sharing 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar e Configure NetMatrix for Automatic Video Sharing 1 In the Management Application s Navigation pane expand Advanced Configuration right click NetMatrix and select Properties 2 Enable the use of NetMatrix by selecting the Enable NetMatrix check box Specify required NetMatrix Recipients properties 3 Select NetMatrix Event Control and configure NetMatrix Event Control properties When ready click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net
372. ransition time settings are tied to the selected patrolling profile This allows you the flexibility of having different wait time and transition time settings for different patrolling profiles on the same camera e PTZ Scanning PTZ scanning continuous panning is supported on a few PTZ cameras only e PTZ scanning Only available if your camera supports PTZ scanning Lets you enable PTZ scanning and select a PTZ scanning speed from the list below the check box Note that PTZ scanning only works for PTZ type 1 cameras where preset positions are configured and stored on the server If the camera is a PTZ type 2 camera and you import preset positions which have previously been defined and stored on the PTZ camera itself through the camera s own configuration interface PTZ scanning will stop working For more information about PTZ types see PTZ Preset Positions e Pausing PTZ Patrolling PTZ patrolling is automatically paused when the camera is operated manually as well as if PTZ on Event is used PTZ patrolling can furthermore be paused if motion is detected Tip Note that pause settings are tied to the selected patrolling profile This allows you the flexibility of having different pause settings for different patrolling profiles on the same camera On Net Surveillance Systems Inc 41 RC C User Manual Camera Specific Properties e Pause patrolling if motion is detected To pause PTZ patrolling when motion is detected so that th
373. ras However e It is not possible to configure motion detection separately for each of a PTZ camera s preset positions e In order not to activate unwanted recording notifications etc motion detection is automatically disabled while a PTZ camera moves between two preset positions After a number of seconds the so called transition time specified as part of the PTZ camera s PTZ patrolling properties motion detection is automatically enabled again PTZ Preset Positions PTZ related properties are only available when you are dealing with a PTZ Pan Tilt Zoom camera PTZ preset positions can be used for making the PTZ camera automatically go to a particular position when particular events occur and when setting up PTZ patrolling profiles Preset positions also become selectable in clients allowing users with required rights to move the PTZ camera between preset positions Names of preset positions must contain only the characters A Z a z and the digits 0 9 If you import preset positions from cameras see the following verify that their names do not contain other characters if they do change the preset position names before importing them Restart services after having made changes to PTZ settings Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service w
374. rchive recordings so databases will never become full As a rule of thumb the more you expect to record the more often you should archive e Archiving Time The Archiving Times list shows the times at which you want to automatically archive the content of all camera databases on the recording server You can do this up to 24 times per day with minimum one hour between each one To add archiving times to the list 1 Specify required time in the time box to the right of the Archiving Times list You specify the required time by selecting the hour minute and second values respectively then clicking the up and down buttons to increase or decrease values Alternatively you can simply overwrite selected hour minute or second values 2 Click the Add button Archive Failure Notification You can automatically get notified if archiving fails e Send e mail on archiving failure If selected e mails to selected recipients will automatically be sent if archiving fails This requires that the e mail notification feature is enabled Recipients are defined as part of the e mail notification properties e Send SMS on archiving failure If selected an SMS mobile phone text message will automatically be sent to selected recipients if archiving fails This requires that the SMS notification feature is enabled Recipients are defined as part of the SMS notification properties E mail and SMS notifications are normally only sent during scheduled
375. rchiving is always performed as fast as possible If archiving to a network drive note the regular camera database can only be stored on a local drive that is a drive attached directly to the RC C server Dynamic Path Selection for Archives With dynamic archiving paths you specify a number of different archiving paths usually across several drives Using dynamic paths is highly recommended and is the default setting when you configure cameras through the Configure Video amp Recording Wizard If the path containing the camera s database is on one of the drives you have selected for dynamic archiving RC C will always try to archive to that drive first If not RC C automatically archives to the archiving drive with the most available space at any time provided there is not a camera database using that drive Which drive that is used for archiving may change during the archiving process and archiving may therefore happen to several archiving drives during the same process This fact will have no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic archiving paths for individual cameras When deciding which drives to use for dynamic archiving consider the pros and cons in the following examples in which we assume that the default archiving path is on drive C drive letters are examples only different drive letters may of course be used in your o
376. rdware Output on Event Overview of Logs The RC C recorder is able to generate various logs e Log Types e Management Application log files These files log activity in the Management Application A new log file is created for each day the Management Application is used You cannot disable this type of logging Management Application log files are named according to the structure AdminYYYYMMDD log for example Admin20101231 log e Recording Server service log files These files log Recording Server service activity A new log file is created for each day the service is used You cannot disable this type of logging Recording Server service log files are named according to the structure RecordingServerYYYYMMDD log for example On Net Surveillance Systems Inc 193 RC C User Manual Configuration RecordingServer20101231 log e Image Server service log files These files log activity on the Image Server service A new log file is created for each day the service is used You cannot disable this type of logging Image Server service log files are named according to the structure ISLog_YYYYMMDD log for example ISLog_20101231 log e image Import service log files These files log activity regarding the Image Import service when this service is used for fetching pre alarm images and storing the fetched images in camera databases Pre alarm images is a feature available for selected cameras only it enables sending of images from immediatel
377. recorded video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field The frame rate must be higher than the recording frame rate specified under normal mode e On motion Select this check box to use the speedup frame rates when motion is detected The camera will return to the normal frame rates two seconds after the last motion is detected e On event Select this check box to use the speedup frame rates when an event occurs and until another event occurs Use of speedup on event requires that events have been defined and that you select start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event The camera will begin using the speedup frame rates when the start event occurs On Net Surveillance Systems Inc 32 RC C User Manual Camera Specific Properties e Stop event Select required start event The camera will return to the normal frame rates when the stop event occurs Tip Speedup does not necessarily have to be based on motion or events you can also use scheduling to configure speedup based on particular periods of time If you prefer such time based speedup you should still enable the use of speedup by selecting the Enable speedup check box e lf the Camera Uses the MPEG Video
378. red camera select Recording amp Archiving Paths and specify required properties o General Recording amp Archiving Paths In the Management Application s navigation pane expand Advanced Configuration double click Cameras and Storage Information and specify required properties Tip If several cameras should use the same path use the General Recording amp Archiving Paths properties With this function a template feature is available which lets you specify shared archiving locations with just a few clicks e Dynamic archiving paths allow greater flexibility and are therefore highly recommended With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the path containing the camera database to be archived is on one of the drives you have selected for dynamic archiving will always try to archive to that drive first If not automatically archives to the archiving drive with the most available space at any time provided there is not a camera database using that drive This fact will have no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic archiving paths for individual cameras To configure archiving paths In the Management Application s navigation pane expand Advanced Configuration double click Cameras and Storage Information select Dynamic Path Selection Archives and specify
379. red cell You can specify a path to local or networked drive as required You can only specify a path to local drive If you change the archiving path and there are existing archived recordings at the old location you will be asked whether you want to move the archived recordings to the new location recommended leave them at the old location or delete them Note that if moving archived recordings RC C will also archive what is currently in the camera s database in case you wonder why the camera database is empty just after you have moved archived recordings this is the reason Retention Time Total amount of time for which you want to keep recordings from the camera that is recordings in the camera s database as well as any archived recordings Default is 30 days Note that the retention time covers the total amount of time you want to keep recordings Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera Select All Click button to select all cameras in the Apply Template column Clear All Click button to clear all selections in the Apply Template column Set selected template value on selected cameras Lets you apply one or more selected values from the template rather than all values to selected cameras Set all template values on selected cameras Lets you apply all values from the template to selected cameras Dynamic
380. ree you from having to specify license keys manually for each hardware device later 1 When you receive the e mail save the attached dlk file at a location accessible from the RC C server for example on a network drive or on a USB stick 2 Inthe Management Application s File menu select Import DLKs or click the Import DLKs button if you are working with the Add Hardware Devices wizard 3 Browse to the location at which you have saved the received dlk file select the file and click Open All DLKs are now imported into the NVR and will be available when you add cameras and other hardware Monitor Storage Space Usage To view how much storage space you have used and how much space is free on the system do the following 1 In the Management Application s navigation pane expand Advanced Configuration and select Cameras and Storage Information 2 View the Storage Usage Summary for the following information which drives are available what drives are used for the size of each drive as well as how much video data other data and free space there is in each drive Overview of Events Input amp Output Hardware input such as door sensors etc can be attached to input ports on hardware devices Input from such external hardware input units can be used for generating events in the NVR Events of various types see the following for details can be used for automatically triggering actions Examples of actions starting or st
381. required properties o General Recording amp Archiving Paths In the Management Application s navigation pane expand Advanced Configuration double click Cameras and Storage Information and specify required properties Tip If several cameras should use the same path use the General Recording amp Archiving Paths properties With this function a template feature is available which lets you specify shared archiving locations with just a few clicks e Dynamic archiving paths allow greater flexibility and are therefore highly recommended With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the path containing the camera database to be archived is on one of the drives you have selected for dynamic archiving will always try to archive to that drive first If not automatically archives to the archiving drive with the most available space at any time provided there is not a camera database using that drive This fact will have On Net Surveillance Systems Inc 178 RC C User Manual Configuration no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic archiving paths for individual cameras To configure archiving paths In the Management Application s navigation pane expand Advanced Configuration double click Cameras and Storage Information select Dynamic Path Selection Archives an
382. reset positions is of course individual for each camera e Preset Positions to Use in a Patrolling Profile Having selected a patrolling profile in the Patrolling profiles list you can specify which of the PTZ camera s preset positions should be used for the selected patrolling scheme 1 In the Preset Positions list select the preset positions you want to use A preset position can be used more than once in a patrol scheme for example if the preset position covers an especially important location Tip By pressing the CTRL button on your keyboard while selecting from the Preset Positions list you can select several or all of list s preset positions in one step 2 Click the amp button to copy the selected preset positions to the Patrolling list 3 The camera will move between preset positions in the sequence they appear in the Patrolling list starting at the preset position listed first If you want to change the sequence of preset positions in the Preset Positions list select a preset position and use the 2 or amp buttons to move the selected preset position up or down in the list The selected preset position is moved one step per click If you later want to remove a preset position from the Patrolling list select the preset position in question and click the amp button e Wait and Transition Timing for a Patrolling Profile e Wait time sec Lets you specify the number of seconds for which the PTZ camera should sta
383. rganization Camera records to drive C and archives to drive C If the path containing the camera s database is on one of the drives you have selected for dynamic archiving RC C will always try to archive to that drive first Archiving will take place quickly but may also fairly quickly fill up the drive with data Camera records to drive C and archives to drive D Obvious benefit is that recordings and archives are on separate drives Archiving takes place less quickly RC C will first temporarily store the archive in the local default archiving directory on C then immediately move the archive to the archiving location on D Therefore sufficient space to accommodate the temporary archive is required on C Camera 1 records to drive C and archives to drive D while Camera 2 records to drive D and archives to drive C Avoid One camera s archiving may take up space required for another camera s recordings In the above example Camera 1 s archiving to D may result in no recording space for camera 2 on D The rule of thumb is Do not cross recording and archiving drives On Net Surveillance Systems Inc 174 RC C User Manual Configuration If you use several surveillance servers in a master slave setup each surveillance server must archive to its own mapped location in order for archiving to work If you attempt to archive to the same mapped location for all the servers archiving will fail Archiving Audio If an audio
384. rity cannot be guaranteed e Log file name not found The log file was not present e Log file name is empty The log file was present but empty On Net Surveillance Systems Inc 194 RC C User Manual Configuration e Last line changed removed in log file name The last line of the log file did not match validation criteria e Encrypted data missing in log file name near line The encrypted part of the log line in question was not present e Inconsistency found in log file name near line The log line does not match the encrypted part e Inconsistency found in log file name at beginning of log file The log file header is not correct This situation is most likely to occur if a user has attempted to delete the beginning of a log file Overview of Services The following services are all automatically installed on the RC C server e RC C Recording Server service A vital part of the surveillance system video streams are only transferred to RC C while the Recording Server service is running e RC C Image Server service Provides access to the surveillance system for users logging in with the Ocularis Client e RC C Image Import service Used for fetching pre and post alarm images and storing the fetched images in camera databases Pre and post alarm images is a feature available for selected cameras only it enables sending of images from immediately before an event took place from the camera to the surveilla
385. river in the Hardware device type list then clicking the Auto deteci Verify Hardware Device Type bution to verify that the driver matches the hardware device or e By just clicking the Auto detect Verify Hardware Device Type button to automatically detect and verify the right driver When the right driver is found the Serial number MAC address field will display the MAC address of the new hardware device The Device License Key DLK required to use the hardware device is issued based on this MAC address If you have already imported a dlk file which includes the DLK for the new hardware device the Device license key DLK field will be pre filled If not you can either enter the DLK for the new device manually in the field or click the Import DLKs button to import a _ dlk file which includes the DLK for the new hardware device When ready click Next Overview of Wizards Wizards guide you through common tasks in e The Add Hardware Devices wizard helps you add cameras and other hardware devices such as video encoders DVRs etc to your system If microphones and or speakers are attached to a hardware device they are automatically added as well e The Configure Video and Recording wizard helps you quickly configure your cameras video and recording properties e The Adjust Motion Detection wizard helps you quickly configure your cameras motion detection properties e The Configure User Access Wizard helps you quickl
386. rol the sensitivity setting On Net Surveillance Systems Inc 37 RC C User Manual Camera Specific Properties Tip If you find the concept of sensitivity difficult to grasp try dragging the slider to its leftmost position The more you drag the slider to the left the more of the preview image becomes highlighted This is because with a high sensitivity even the slightest change in a pixel will be regarded as motion e Motion Determines how many pixels must change in the image before it is regarded as motion The selected level is indicated by the black vertical line in the motion level indication bar below the preview image The black vertical line serves as a threshold When detected motion is above that is to the right of the selected sensitivity level the bar changes color from green to red indicating a positive detection As an alternative to using the slider you may specify a value between 0 and 10000 in the field next to the slider to control the motion setting 3 Specify required Motion detection interval that is how often motion detection analysis should be carried out on video from the camera The interval is measured in milliseconds default is 240 milliseconds that is close to once every quarter of a second The interval is applied regardless of the camera s frame rate settings e Motion Detection and PTZ Cameras Motion detection generally works the same way for PTZ Pan Tilt Zoom cameras as it does for regular came
387. rolling list select the preset position in question and click the amp button e Wait and Transition Timing for a Patrolling Profile e Wait time sec Lets you specify the number of seconds for which the PTZ camera should stay at each preset position before it moves on to the next preset position Default is 10 seconds The wait time applies to all presets in the patrolling profile that is the PTZ camera will stay at each preset position for the same number of seconds e Transition time sec Lets you specify the number of seconds required for the PTZ camera to move from one preset position to another Default is five seconds During this transition time motion detection is automatically disabled as irrelevant motion is otherwise likely to be detected while the camera moves between the preset positions After the specified number of seconds motion detection is automatically enabled again The transition time applies to all presets in the patrolling profile It is thus important that the camera is able to reach between any of the patrolling profile s preset positions within the number of seconds you specify If not false motion is likely to be detected keep in mind that it takes longer for the PTZ camera to move between positions that are located physically far apart for example from an extreme left position to an extreme right position than between positions that are located physically close together Tip Note that wait time and t
388. rom 08 30 until 17 45 then the Evening patrolling profile Mondays from 17 45 until 23 00 Use of two patrolling profiles cannot overlap Unlike other types of scheduling there are no ready made Always on and Always off schedule profiles for PTZ patrolling You can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile 1 In the field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp 2 Click the Add New button which becomes available when you specify a name 3 In the Patrolling profile list below the calendar section select the required patrolling profile 4 Inthe calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 0800 sa 7 e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day On Net Surveillance Systems Inc 82 RC C User Manual Scheduling
389. rpose Ocularis Client installed On Net Surveillance Systems Inc 183 RC C User Manual Configuration Many users prefer the Ocularis Client for NetMatrix viewing purposes since they already use the Ocularis Client for viewing other types of surveillance video The NetMatrix Monitor however offers slightly more features including a pop up mode with which you will not see the NetMatrix Monitor window until there is video to display On the other hand the NetMatrix Monitor is meant for viewing only whereas with the Ocularis Client you are able to send video to other NetMatrix recipients For more information about NetMatrix recipients refer to the NetMatrix Monitor User s Manual and the Ocularis Client User s Manual available from www onssi com There are two ways in which NetMatrix triggered video can appear on a NetMatrix recipient e Manual triggering Another user wants to share important video and sends it from an Ocularis Client session or from a custom made web page to the required NetMatrix recipient e Automatic triggering Video is sent to the required NetMatrix recipient automatically when a predefined event occurs for example when a door sensor detects that a door is opened or when the surveillance system detects motion in the video from a camera e Configure NetMatrix for Manual Video Sharing 1 In the Management Application s Navigation pane expand Advanced Configuration right click NetMatrix and select Properties
390. running Recording Server service 2 Double click the downloaded video device driver file Device nstaller exe to begin installation Depending on your security settings one or more Windows security warnings may appear after you click the link If such security warnings appear accept security warnings by clicking the Run button button may have other name exact button name depends on your operating system version 3 Select required language and click OK This will open the Video Device Driver Setup Wizard which will guide you through the installation Click the Next button and follow the wizard 4 When the wizard is complete remember to start the Recording Server service again Hardware Driver IDs If using the Add Hardware Devices Wizard s Import from CSV File option you must if cameras and server are offline specify a HardwareDriverlD for each hardware device you want to add In the following IDs for all hardware devices supported at the time of release of this version of are listed The list is sorted alphabetically by device with the corresponding ID at the end of each line Example ACTi ACD 2100 105 indicates that you should use 105 as the ID if adding an ACTi ACD 2100 hardware device This list is for guidance only IDs are subject to change without notice More devices may be supported by the time you read this as new versions of video device drivers called Device Packs are released at regular intervals To view a c
391. s Inc 60 RC C User Manual Wizard e CSV File Format and Requirements The CSV file must have a header line defining each value on the subsequent lines and subsequent lines must each contain information about one hardware device only A minimum of information is always required for each hardware device but note that the minimum required information is different depending on whether your server and cameras are online or offline Cameras and Server Are Online If cameras and server are online required information is HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 HardwarePort Port to use for HTTP communication with the hardware device Default is port 80 HardwarePassword Password for the hardware device s administrator account Most organizations use their own passwords rather than device manufacturers passwords Camera and Server Are Offline If cameras and server are offline required information is HardwareAddress IP address of the hardware device Required format IPv4 or IPv6 HardwareMacAddress MAC address of the hardware device Examples of valid MAC address formats 0011D81187A9 0011d81187a9 00 11 D8 11 87 A9 00 11 D8 11 87 A9 HardwareDriverlD A numerical ID used for identifying which video device driver to use for the hardware device in question For information about how to find the right ID for your devices see Hardware Driver IDs HardwarePort Port to use for HTTP communic
392. s Start menu select Run and type the following in the Open field e If you are performing the test on the RC C server itself telnet localhost 1234 e If you are performing the test from a remote computer Substitute oca host with the IP address of the RC C server Example If the IP address of the RC C server is 123 123 123 123 type telnet 123 123 123 123 1234 This will open a Te net window In the above examples the number 1234 indicates the port on which the RC C server listens for generic events Port 1234 is the default port for this purpose but it is possible to change this by specifying another port number as part of the general event handling configuration If the alert and generic event port number has been changed on your system type your system s alert and generic event port number instead of 1234 7 Inthe Te net window type the terms so called event substring required to trigger your generic event In our case a single term video is required s Telnet localhost 9 x While typing in the Telnet window you may experience so called echo This is simply the server repeating some or all of the characters it receives it will not have any impact as long as you are sure you type the required characters On Net Surveillance Systems Inc 166 RC C User Manual Configuration 8 Close the Telnet window by clicking the close button in its top right corner It is important that you close the window
393. s also keep in mind individual cameras scheduling e Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box e Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select if the RC C recorder should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notification configuration When using SMS notifications also bear in mind individual cameras scheduling e Delete Lets you delete a selected event e Add Lets you add a new event When Global or a specific camera is selected clicking Add will add a new manual event When a specific manual event is selected clicking Add will add a timer event to the selected manual event Manual Recording When manual recording is enabled Ocularis Client users with the necessary rights can manually start recording if they see something of interest while viewing live video from a camera which is not already recording If enabled manual recording can thus take place even if recording for individual cameras is set to Never or Conditionally When started from the Ocularis Client such user driven recording will always take place for a fixed time for example for five minutes e Enable manual recording Select check box t
394. s required user names and passwords etc If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Manual option the wizard is divided into a number of pages Hardware Device Information Driver Selection and Verification e Missing DLKs if Applicable e Overview and Names Adjust Motion Detection Wizard The Adjust Motion Detection wizard helps you quickly configure your cameras motion detection properties The wizard is divided into two pages e Exclude Regions e Motion Detection Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application Configure User Access Wizard The Configure User Access wizard helps you quickly configure clients access to NVR video When using the wizard all users you add will have access all to cameras including any new cameras added at a later stage If this is not acceptable specify access settings users and user rights separately see Configure Server Access Also note that you cannot add users to groups through the wizard The wizard is divided into a number of pages e Server Access Settings e Basic and Window
395. s Users e Access Summary Configure Video amp Recording Wizard The Configure Video and Recording wizard helps you quickly configure your cameras video and recording properties The wizard is divided into a number of pages e Video Settings and Preview e Online Schedule e Live and Recording Settings Motion JPEG Cameras e Live and Recording Settings MPEG Cameras e Drive Selection Recording and Archiving Settings Replace Hardware Device Wizard The Replace Hardware Device wizard helps you replace a hardware device which you have previously added to and configured on your surveillance system with a new one The wizard is divided into two pages On Net Surveillance Systems Inc 156 RC C User Manual Configuration e New Hardware Device Information Database Action Remember that you must have a Device License Key DLK for every hardware device cameras etc you intend to use on the system Before using the wizard make sure you have a DLK for the new hardware device Pages The wizard automatically scans your network for hardware devices and lists devices real time as they are detected All properties on a white background are editable properties on a light blue background cannot be edited Wait until the scan is complete If the scan takes very long you can stop it with the Stop Scan button the wizard will remember any devices detected up to that point When the scan is complete e Go through the l
396. s are required On Net Surveillance Systems Inc 44 RC C User Manual Camera Specific Properties Language Support amp XML Encoding e Language Select required language character set Example If the surveillance server runs a Japanese version of Windows select Japanese Provided access clients also use a Japanese version of Windows this will ensure that the correct language and character encoding is used in clients communication with the server If using a master slave setup remember to specify the same language character set on all involved servers Configure E mail Notifications With e mail notifications you and your colleagues can instantly get notified when your surveillance system requires attention The NVR can automatically send e mail notifications to one or more recipients when e Motion is detected e Events occur you can select individually for each event whether you want to receive an e mail notification or not thus avoiding irrelevant e mails e Archiving fails if e mail notification has been selected as part of the archiving properties Do the following 1 Inthe Management Application s Navigation pane expand Advanced Configuration right click E mail and select Properties 2 You enable the use of e mail alerts separately for the Recording Server service e Enable e Mail Recording Server Enables e mail notifications whenever the Recording Server service is running E mail notifications will then be sent
397. s based on the content of camera databases is not recommended it may cause sharing violations or other malfunctions Instead create such backups based on the content of archives If you have not specified separate archiving locations for separate cameras you could simply back up the default local archiving directory Archives When scheduling a backup make sure the backup job does not overlap with any scheduled archiving times e Viewing Archived Recordings Archived recordings may be viewed with the Ocularis Client You are able to use all of Ocularis Client s advanced features video browsing searching export etc for archived recordings as well Archives Stored Locally or on Network Drives For archived recordings stored locally or on network drives you simply use the Ocularis Client s playback features for example the Kinetic Timeline browser for finding and viewing the required recordings just like you would with recordings stored in a camera s regular database Exported Archives For exported archives for example archives stored on a CD you may also use the Ocularis Client e Virus Scanning and Archiving If allowed in your organization disable any virus scanning of camera databases and archiving locations For more information see Virus Scanning Information e New Database if Archiving Fails Under extremely rare circumstances archiving may fail For example a database may be full and ready for archiving but the opera
398. s must unique and must not contain any of the following special characters lt gt amp e CameraShoritcut number Number for keyboard shortcut access to the camera in the Ocularis Client Must appear as CameraShortcut1 CameraShortcut2 etc in the header line since a hardware device can potentially have more than one camera attached A camera shortcut number must not contain any letters or special characters and must not be longer than eight digits e PreBufferLength optional number Required length in seconds of pre recording If specified as for example PreBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device e PostBufferLength optional number Required length in seconds of post recording If specified as for example PostBufferLength1 information relates to a specific camera otherwise to all cameras attached to the hardware device e RecordingPath optional number Path to the folder in which a camera s database should be stored If specified as for example RecordingPath1 information relates to a specific camera otherwise to all cameras attached to the hardware device e ArchivePath optional number Path to the folder in which the camera s archived recordings should be stored Remember that an archiving path is only relevant if not using dynamic paths for archiving If specified as for example ArchivePath1 information relates to a specific camera o
399. s of pre recording video will be recorded from three seconds before Door Opened occurs and until Door Closed occurs e Enable pre recording Available only when the option Conditional is selected Specify the number of seconds for which you want to record video from before recording start conditions that is motion or start event are met On Net Surveillance Systems Inc 145 RC C User Manual Configuration e Enable post recording Available only when the option Conditional is selected Specify the number of seconds for which you want to record video after recording stop conditions that is motion end or stop event are met How does pre and post recording work The NVR receives video in a continuous stream from the camera whenever the camera is enabled and scheduled to be online This is what lets you view live video but it also means that the NVR can easily store received video for a number of seconds in its memory a k a buffering If it turns out that the buffered video is needed for pre or post recording it is automatically appended to the recording If not it is simply discarded Scheduling All Cameras All properties on a white background are editable properties on a light blue background cannot be edited Note that the properties Online Period Speedup E mail Notification SMS Notification and PTZ Patrolling can also be specified individually for each camera Template The template can help you configure similar properties
400. s respectively click the Restart button When the two services are restarted the imported configuration is applied Import Changes to Configuration It is possible to import changes to a configuration This can be relevant if installing many similar RC C NVRs for example in a chain of stores where the same types of server hardware devices and cameras are used in each location In such cases you can use an existing configuration typically a cloned configuration as a template for the other installations However since the stores installations are not exactly the same the hardware devices and cameras are of the same type but they are not physically the same and thus they have different MAC addresses there needs to be an easy way of importing changes to the template configuration This is when importing changes about hardware devices and cameras as comma separated values CSV from a file is so beneficial 1 2 From the Management Application s menu bar select File gt Import Changes to Configuration Select Online verification if the new hardware devices and cameras listed in your CSV file are connected to the server and you want to verify that they can be reached Then point to the CSV file and click the mport Configuration from File button CSV File Format and Requirements The CSV file must have a header line determining what each value on the subsequent lines is about and subsequent lines must each contain inf
401. se becomes corrupted a fast repair will be attempted If the fast repair fails the contents of the database will be deleted o Repair archive if fails If the database becomes corrupted a fast repair will be attempted If the fast repair fails the contents of the database will be archived o Delete no repair If the database becomes corrupted the contents of the database will be deleted O Archive no repair If the database becomes corrupted the contents of the database will be archived No video can be recorded in a database while it is being repaired For large installations a repair may take several hours especially if the Repair scan delete if fails action which involves two different repair methods is selected and the first repair method fast repair fails Tip There are several things you can do to prevent that your databases become corrupt in the first place See Protect Recording Databases from Corruption e Configure Dynamic Paths With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the drive containing the camera s database is among the path you have selected for dynamic archiving the NVR will always try to archive to that path first If not the NVR automatically archives to the archiving path with the most available space at any time provided there is not a camera database using that drive See also Dynamic Path Selection Event Notification When you c
402. sed on their Windows login This generally provides better security than the basic user concept and is the recommended method If you want to include users in groups make sure you add required groups before you add users You cannot add existing users to groups You can add Windows users in two ways One is through the Configure User Access Wizard the other is described here On Net Surveillance Systems Inc 170 RC C User Manual Configuration The users you want to add must have been defined as local PC users on the server Simple file sharing must be disabled on the server To disable simple file sharing right click Windows Start button and select Explore In the window that opens select the Tools menu then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple files sharing check box is cleared When ready click OK and close the window 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups dialog Select Users or Groups i Wwe Select thes object type Users ot Groupe Orec Types Erom thes location naa Erter the object names to select omoi i Advanced Cancel Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names t
403. select how particular the analysis should be on received data packages o Search in order for the event to occur the received package must contain the message specified in the Event message expression field but may also have more content Example If you have specified that the received package should contain the terms User001 and Door053 the event will be triggered if the received package contains the terms User001 and Door053 and Sunday since On Net Surveillance Systems Inc 56 RC C User Manual Event amp Output Specific Properties your two required terms are contained in the received package o Match in order for the event to occur the received package must contain exactly the message specified in the Event message expression field and nothing else e Send e mail if this event occurs Only available if e mail notification is enabled Select if the NVR should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notifications also keep in mind individual cameras scheduling e Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box e Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select
404. server running any other supported operating system make a copy of the folder C Program Data OnSSI RC C and all of its sub folders 2 Open the folder C Program Files OnSSI RC C devices and verify if the file devices ini exists If the file exists make a copy of it The file will exist if you have configured video properties for certain types of cameras for such cameras changes to the properties are stored in the file rather than on the camera itself 3 Store the copies away from the RC C server so that they will not be affected if the server is damaged stolen or otherwise affected Remember that a backup is a snapshot of your RC C system configuration at the time of backing up If you later change your configuration your backup will not reflect the most recent changes Therefore back up your system configuration regularly Tip When you back up your configuration as described the backup will include restore points This allows you to not only restore the backed up configuration but also to revert to an earlier point in that configuration if required To Restore Your Backed up Configuration 1 If RC C is used on a server running Windows XP or Windows Server 2003 copy the content of the backed up folder into C Documents and Settings All Users Application Data OnSSI RC C If RC C is used on a server running any other supported operating system copy the content of the backed up folder into C Program Data OnSSI RC C 2 If
405. sition e Hiding and Removing Features You can remove features in several ways e You can hide features from the welcome page by clearing check boxes in the NVR Download Manager s tree structure In that case the features will still be installed on the surveillance system server and by selecting check boxes in the NVR Download Manager s tree structure you can quickly make the features available again e You can remove features which have previously been made available through the NVR Download Manager This will remove the installation of the features on the surveillance system server The features will disappear from the NVR Download Manager but installation files for the features will be kept in the surveillance system server s installers folder so you can re install them later if required 1 Inthe NVR Download Manager click the Remove features button 2 Inthe Remove Features window select the features you want to remove 3 Click OK You will be asked to confirm that you want to remove the selected features If you are sure click the Yes button e You can remove installation files for non required features from the surveillance system server This can help you save disk space on the server if you know that your organization is not going to use certain features typically non relevant language versions See Remove Installation Files for End User Features for more information e Virus Scanning Information If you are using vir
406. sktop shortcut Alternatively use Windows Start menu Start gt All Programs gt OnSSI gt Management Application Depending on your configuration access to the Management Application may be password protected Use the Built in Help System To use RC C s built in help system simply click the Help button in the Management Application s toolbar Alternatively press the F1 key on your keyboard while using RC C The help system opens in a separate window allowing you to easily switch between help and RC C The help system is context sensitive This means that when you press F1 for help while working in a particular RC C dialog the help system automatically displays help matching that dialog Navigating the Built in Help System To navigate between the help system s contents simply use the help window s tabs Contents Search Favorites and Glossary or use the links inside the help topics e Contents Tab Navigate the help system based on a tree structure Many users will be familiar with this type of navigation from for example Windows Explorer e Search Tab Search for help topics containing particular terms of interest For example you can search for the term zoom and every help topic containing the term zoom will be listed in the search results Double clicking a help topic title in the search results list will open the required topic e Favorites Tab Build a list of your favorite help topics Whenever you find a help topic of p
407. source microphone or speaker is enabled on a hardware device audio recordings will be archived together with video recordings from the camera attached to the hardware device If the hardware device is a video encoder with several channels audio will be archived with the camera on channel 1 When an audio source is enabled audio is recorded to the associated camera s database This will affect the database s capacity for storing video You may therefore want to use scheduled archiving more frequently if recording audio and video than if only recording video e Storage Capacity Required for Archiving The storage capacity required for archiving depends entirely on the amount of recordings you plan to keep and on how long you want to keep them also known as retention time Some organizations want to keep archived recordings from a large number of cameras for several months or years Other organizations may only want to archive recordings from one or two cameras and they may want to keep their archives for much shorter periods of time You should always first consider the storage capacity of the local drive containing the default archiving directory to which archived recordings are always moved even though they may immediately after be moved to an archiving location on another drive As a rule of thumb the capacity of the local drive should be at least twice the size required for storing the databases of all cameras You cannot archive to
408. ss will always be _ 7 example 00408c51e181_ 1 On Net Surveillance Systems Inc 13 RC C User Manual Configuration amp Properties Storing Archives at Other Locations than the Default Archiving Directory You are of course also able to store archives in other directories than the default archiving directory However you cannot archive to external drives only to a local drive on the computer running RC C You are of course also able to store archives at other locations than locally in the default archiving directory You may for example specify that your archives should be stored on a network drive When archiving to other locations than the default archiving directory RC C will first temporarily store the archive in the local default archiving directory then immediately move the archive to the archiving location you have specified While this may at first glance seem unnecessary it greatly speeds up the archiving procedure and reduces delays in case of network problems Archiving directly to a network drive would mean that archiving time would vary depending on the available bandwidth on the network First storing the archive locally then moving it ensures that archiving is always performed as fast as possible If archiving to a network drive note the regular camera database can only be stored on a local drive that is a drive attached directly to the RC C server Dynamic Path Selection for Archives With dynamic archiving pa
409. ssword Password for the hardware device s administrator account a k a the root password e Hardware type Read only field displaying the type of video device driver used for communication with the hardware device e Serial number MAC address Read only field displaying the serial number of device The serial number is usually identical to the 12 character hexadecimal MAC address of the hardware device example 0123456789AF e Device license key DLK The 16 character license key DLK which gives you the right to use the hardware device with RC C e Replace Hardware Device Opens a wizard with which you if required can replace the selected hardware device with another one This can typically be relevant if you replace a physical camera on your network The wizard helps you take all relevant issues into account finding the DLK for the new hardware device deciding what to do with recordings from cameras attached to the old hardware device etc On Net Surveillance Systems Inc 64 RC C User Manual Wizard PTZ Device The PTZ Device tab is only available if configuring video encoder hardware devices on which the use of PTZ Pan Tilt Zoom cameras is possible e Connected cameras have Pan tilt Zoom capabilities Select check box if any of the cameras attached to the video encoder device is a PTZ camera e PTZ type on COM f a PTZ camera is controlled through the COM port a k a serial port in question select the require
410. st stop the Recording Server service while you perform the test remember to start the service again afterwards Do not send SMS on camera failures f selected SMS notifications will not be sent if the NVR loses contact with a camera Otherwise automatic SMS notifications will be sent in such cases regardless of any scheduled SMS notification periods SMS Notification When you configure scheduling for specific cameras you can specify SMS mobile phone text message notification periods Before you can define this type of schedule SMS notification must be enabled You specify a camera s SMS notification periods by creating schedule profiles based on Periods of time example Mondays from 08 30 until 17 45 shown in green n The RC C NVR comes with two simple schedule profiles Always on and Always off which cannot be edited or deleted If these do not meet your needs you can create any number of customized schedule profiles for each camera When you create a customized schedule profile for one camera you can reuse it with other cameras if required To create a customized schedule profile is In the field below the Schedule profiles list specify a name for the new schedule profile Schedule profile names not contain any of the following special characters lt gt amp Click the Add New button which becomes available when you specify a name In the calendar section place your mouse pointer at a required start
411. stead 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device in question 2 Right click the camera microphone or speaker you want to disable and select Disable 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Restart the Recording Server service Disable or Delete Cameras All cameras are enabled by default This means video from the cameras can be transferred to the NVR provided that the cameras are scheduled to be online To disable a camera 1 In the Management Application s navigation pane expand Advanced Configuration expand Cameras and Storage Information double click the camera you want to disable and clear the Enabled checkbox 2 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 187 RC C User Manual Configuration To delete a camera you technically have to delete the hardware device Deleting the hardware device will also delete any attached speakers and microphones If you do not want this consider disabling the camera instead Export amp Import System Configuration You can export the current configuration of the RC C NVR either as a safety measure in order to have a backup file of your configuration or a as a clone allowing you to use a similar co
412. sting recordings at the old location you will be asked whether you want to move the recordings to the new location recommended leave them at the old location or delete them Tip If you have several cameras and several local drives are available you can improve performance by distributing individual cameras databases across several drives Archiving Path Only editable if not using dynamic paths for archiving Path to the folder in which the camera s archived recordings should be stored Default is C VideoData To browse for another folder click the browse icon next to the required cell You can specify a path to local or networked drive as required You can only specify a path to local drive If you change the archiving path and there are existing archived recordings at the old location you will be asked whether you want to move the archived recordings to the new location On Net Surveillance Systems Inc 144 RC C User Manual Configuration recommended leave them at the old location or delete them Note that if moving archived recordings RC C will also archive what is currently in the camera s database in case you wonder why the camera database is empty just after you have moved archived recordings this is the reason e Retention Time Total amount of time for which you want to keep recordings from the camera that is recordings in the camera s database as well as any archived recordings Default is 30 days Note that the ret
413. t Select required start event The camera will begin using the speedup frame rates when the start event occurs e Stop Event Select required start event The camera will return to the normal frame rates when the stop event occurs e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera Frame Rate MPEG All properties on a white background are editable properties on a light blue background cannot be edited Note that all of the Frame Rate MPEG properties can also be specified individually for each camera using MPEG On Net Surveillance Systems Inc 28 RC C User Manual General Recording amp Storage Properties e Template The template can help you configure similar properties quickly For example you have 50 cameras and you want a particular frame rate on all of them Instead of having to enter the same piece of information 50 times you can simply enter it once in the template and then apply the template to the 50 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you
414. t gt amp Video channel enabled Lets you enable disable each of the selected hardware device s video channels Many hardware devices only have a single video channel in which case only one channel will be listed Other hardware devices typically video encoder devices have several video channels Why are some of the channels unavailable This will be the case if you are not licensed to use all of a video encoder device s channels Example You have a video encoder device with four channels but your license for the device only allows you to use two of them In that case you will only be able to have two channels enabled at a time the two other channels will be disabled Note that you are free to select which two channels you want to enable Contact OnSSI if you need to change your number of licenses NetCentral e Enable NetCentral connections Enables the use of NetCentral connections allowing you to specify further properties e Login Name Type the account name used for the connection between the RC C NVR and NetCentral servers The name must match the name specified on the NetCentral server itself Default name is Name e Password Type the password used for the connection between the RC C and NetCentral servers The password must match the password specified on the NetCentral server itself Default password is Pass e Port Type the port number to which the NetCentral server should connect when accessing the RC C ser
415. t as if you were entering them directly on the server Windows includes a client for use with Telnet For this example we have created a generic event called Video Our generic event simply specifies that if the term video appears in a received TCP data package the generic event should be triggered Your generic event may be different but you can still use the principles outlined in the following steps 1 In the Management Application navigation pane expand Advanced Configuration then expand Cameras and Storage Information right click a camera to which you have access in the Ocularis Client and select Properties 2 Select Event Notification select the required generic event and click OK Make sure that your generic event is the only event appearing in the Selected Events list while you are performing the test otherwise you cannot be sure that it is your generic event which triggers the event notification Once you are done testing you can move any temporarily removed events back to the Selected Events list 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Make sure the Recording Server service is running Also make sure that the camera for which you just configured the event notification is displayed in your Ocularis Client and that you have camera title bars On Net Surveillance Systems Inc 50 RC C User Manual Events Input amp Output enabled in your Ocu
416. t is not sent to the surveillance system until you close the window 9 Log in to the Ocularis Client If the yellow event indicator lights up for the required camera your generic event works as intended Add a Timer Event Timer events are separate events triggered by the hardware input event or manual event or generic event under which they are defined Timer events occur a specified number of seconds or minutes after the event under which they are defined has occurred Timer events may be used for a wide variety of purposes typically for stopping previously triggered actions Examples e A camera starts recording based on a hardware input event for example when a door is opened a timer event stops the recording after 15 seconds e Lights are switched on and a camera starts recording based on a manual event a timer event stops the recording after one minute and another timer event switches the lights off after two minutes To add a timer event select any event you have previously configured click the Add button and specify required properties When ready click OK and save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Tip You can add as many timer events as required under an event This way you can for example make one timer event trigger something 10 seconds after the main event another timer event trigger something else 30 seconds after the main event and a
417. t of associations On Net Surveillance Systems Inc 52 RC C User Manual General Event Properties General Event Properties Ports amp Polling The General Event Properties window lets you specify network settings to be used in connection with event handling e Alert and generic event port Lets you specify port number to use for handling events including generic events Default port is port 1234 e SMTP event port Lets you specify port number to use for sending event information from hardware devices to the NVR via SMTP Default port is port 25 e FTP event port Lets you specify port number to use for sending event information from hardware devices to the NVR via FTP Default port is port 21 e Polling interval 1 10 second For a small number of hardware devices primarily dedicated input output devices it is necessary for RC C to regularly check the state of the hardware devices input ports in order to detect input Such state checking at regular intervals is called polling You can specify in tenths of a second the interval between state checks Default value is 10 tenths of a second that is one second For dedicated input output devices it is highly recommended that the polling frequency is set to the lowest possible value one tenth of a second between state checks For information about which hardware devices require polling see the release note On Net Surveillance Systems Inc 53 RC C User Manual Event
418. t of the exported evidence since no installation is required in order to use the Viewer for browsing exported evidence If you receive the video evidence on for example a CD the Viewer will typically start automatically when you insert the CD on your computer On Net Surveillance Systems Inc 110 RC C User Manual Backup Backup System Configuration Backup We recommend that you make regular backups of the RC C recording component configuration cameras schedules views etc as a disaster recovery measure While it is rare to lose your configuration it can happen under unfortunate circumstances Luckily it takes only a minute to back up your existing configuration The following describes backup of the configuration in RC C recording component version 7 0 In the following we assume that you have not changed RC C s default configuration path which is C Documents and Settings All Users Application Data OnSSI RC C on servers running Windows XP or Windows Server 2003 and C Program Data OnSSI RC C on servers running all other supported operating systems If you have changed the default configuration path you must take your changes into consideration when using the method described in the following To Back Up 1 If RC C is used on a server running Windows XP or Windows Server 2003 make a copy of the folder C Documents and Settings All Users Application Data OnSSI RC C and all of its sub folders If RC C is used on a
419. t positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Template column e Set selected template value on selected cameras Lets you apply only a selected value from the template to selected cameras ms ons only sce ra Start Event Stop Event Event Mi Manual Evert 1 M Manual Event 2 v Example Only the selected value is applied using this method On Net Surveillance Systems Inc 123 RC C User Manual Configuration e Set all template values on selected cameras Lets you apply all values from the template to selected cameras Frame Rate e Ifthe Camera Uses the MJPEG Video Format With MJPEG you can define frame rates for regular as well as speedup modes Regular Frame Rate Mode Live frame rate Frame rate for viewing live video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field e Recording frame rate Frame rate for viewing recorded video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field Speedup Frame Rate Mode e Enable speedup frame rate The speedup feature lets you use a higher than normal frame rate if motion is detected and or an event occurs When you enable speedup further fields for specifying speedup details become a
420. t required language character set Example If the surveillance server runs a Japanese version of Windows select Japanese Provided access clients also use a Japanese version of Windows this will ensure that the correct language and character encoding is used in clients communication with the server If using a master slave setup remember to specify the same language character set on all involved servers Local IP Ranges When configuring server access that is clients access to the RC C server you can specify IP address ranges which the NVR should recognize as coming from a local network This can be relevant if different subnets are used across your local network On Net Surveillance Systems Inc 128 RC C User Manual Configuration 4 Logs Click the Add button In the Start Address column specify the first IP address in the required range In the End Address column specify the last IP address in the required range Tip If required an IP address range may include only one IP address example 192 168 10 1 192 168 10 1 Repeat if other local IP address ranges are required Logs that is Management Application log Recording Server service log Image Server service log Image Import service log Path These system log files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista To specify another location for your log f
421. t required start event When the stop event occurs the camera will return to recording keyframes only Video When you configure video and recording for specific cameras properties are to a large extent camera specific Since such properties vary from camera to camera descriptions in the following are for guidance only If the selected camera is accessible a live preview is displayed Click the Configure Video Properties button to open a separate window with properties for the selected camera The video properties typically let you control bandwidth brightness compression contrast resolution rotation etc by overwriting existing values of selecting new ones When adjusting video settings you are for most cameras able to preview the effect of your settings in an image below the fields Video settings may feature an nclude Date and Time setting If set to Yes date and time from the camera will be included in video Note however that cameras are separate units which may have separate timing devices power supplies etc Camera time and NVR system time may therefore not correspond fully and this may occasionally lead to confusion As all frames are time stamped by the NVR upon reception and exact date and time information for each image is already known it is recommended that the setting is set to No Tip For consistent time synchronization you may if supported by the camera automatically synchronize camera and system time
422. t to the Global node indicates that one or more global manual events have already been configured A sign next to a camera indicates that one or more manual events have already been configured for that camera Event name Specify a name for the event this is the name that client users will see Manual event names must be unique and must not contain the following characters lt gt amp Some cameras only support event names of a certain length and or with a certain structure Refer to the camera s documentation for exact details Send e mail if this event occurs Only available if e mail notification is enabled Select if the RC C recorder should automatically send an e mail when the event occurs Recipients are defined as part of the e mail notification configuration When using e mail notifications also keep in mind individual cameras scheduling On Net Surveillance Systems Inc 54 RC C User Manual Event amp Output Specific Properties Attach image from camera Only available if e mail notification is enabled Select to include an image recorded at the time the event is triggered in the e mail notification then select the required camera in the list next to the check box Send SMS if this event occurs Only available if SMS mobile phone text message notification is enabled Select if the RC C recorder should automatically send an SMS when the event occurs Recipients are defined as part of the SMS notificatio
423. tage VIPC5320 501 Vantage VIPC6510F 501 Vantage VIPC6610F 501 Vantage VIPC7100 series 501 Vantage VIPC7200 series 501 Vantage VIPC7300 series 501 Vantage VIPS2120 501 Vantage VIPS2310Q 501 Vantage VIPS2410 506 VCS VideoJet 10 96 VCS VideoJet 400 94 VCS VIP 10 96 Veo Observer XT 32 Verint Nextiva S1700e 103 Verint Nextiva S1704e 135 Verint Nextiva S1708e 111 Verint Nextiva S1712e 163 Verint Nextiva S1724e 164 Verint Nextiva S1900e 103 Verint Nextiva S1950e 103 Verint Nextiva S1970e 103 Verint Nextiva S2600e S2610e 103 Verint Nextiva S2700e 103 Videology 20N758 184 Videology 21N758 184 Videology Server Board 189 Vivotek FD6100 series 109 Vivotek FD7131 331 Vivotek FD7132 331 Vivotek FD7141 331 Vivotek FD7141V 331 Vivotek IP2121 58 Vivotek IP2122 58 Vivotek IP3121 97 Vivotek IP3122 97 Vivotek IP3135 97 Vivotek IP6124 109 Vivotek IP7130 333 Vivotek IP7131 155 Vivotek IP7133 348 Vivotek IP7134 348 Vivotek IP7135 155 Vivotek IP7137 155 Vivotek IP7138 331 Vivotek IP7139 331 Vivotek IP7142 251 Vivotek IP7151 251 Vivotek IP7152 251 Vivotek IP7153 251 Vivotek IP7154 251 Vivotek IP7160 251 Vivotek IP7161 251 Vivotek IP7251 347 Vivotek IP7330 333 Vivotek IZ7151 349 Vivotek PT3124 107 Vivotek PT7135 158 Vivotek PT7137 158 Vivotek PZ6122 110 Vivotek PZ7111 332 Vivotek PZ7112 332 Vivotek PZ7121 332 Vivotek PZ7122 332 Vivotek PZ7131 332 Vivotek PZ7132 332 Vivotek PZ7151 349 Vivotek PZ7152 349 Vivotek SD6122V 110 Viv
424. tching is likely to help prevent problems from occurring The way to configure 32 bit Windows to be LARGEADDRESSAWARE depends on your type of Windows operating system In the following you will see two methods outlining Microsoft s recommended procedure for increasing the per process memory limit to 3 GB Use the first method if running Windows XP Professional or Windows Server 2003 Use the second method if running Windows 2008 Server Windows Vista Business Windows Vista Enterprise or Windows Vista Ultimate e What to Do If Running Windows XP Professional or Windows Server 2003 IMPORTANT Improper modification of boot ini can render the operating system inoperable On Net Surveillance Systems Inc does not assume any responsibility for changes you make to the operating system Adding the 3 GB Switch The following technique can be used to add the 3 GB switch to the boot ini file From a command prompt enter the following to add the 3 GB switch to the end of the first line of the operating system section in the boot ini file requires administrative privileges BOOTCFG RAW 3GB A ID 1 Where e RAW specifies the operating system options for the boot entry The previous operating system options will be modified e 3GB specifies the 3 GB switch On Net Surveillance Systems Inc 92 RC C User Manual Stability Improvement e A specifies that the operating system options entered with the RAW switch will be appended to the
425. ted it will not be possible to view or record video Restarting the services typically only takes some seconds but in order to minimize disruption you may want to restart services at a time when you do not expect important incidents Users connected to the NVR with Ocularis Client will typically remain logged in during the services restart but they will experience a short video outage Change or Reset the Management Application Behavior You can change the way the Management Application behaves For example the Management Application will ask you to confirm many of your actions by default If you find this annoying you can change the Management Application s behavior so it will not ask you again 1 In the Management Application s menu bar select Application Settings gt Application Behavior 2 For each action you can now select how the Management Application should behave Examples e When you attempt to delete a hardware device should the Management Application ask you to confirm that you want to delete the hardware device or should it delete the hardware device straight away without asking e You can use a maximum of 64 cameras at a time on a single RC C NVR server If you add more than 64 cameras should the Management Application warn you or not Note that selectable behavior may vary depending on the type of action 3 Click OK 4 Save your configuration changes by clicking the Save Configuration button in the Management App
426. tes When managing microphones and speakers in RC C you manage the microphones and speakers attached to cameras not microphones and speakers attached to Ocularis Client operators computers Configure Microphones Configuration of microphones is very basic settings such as volume etc are controlled on the microphone units themselves 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device to which the required microphone is attached 2 Right click the required microphone and select Properties 3 Specify properties as required 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 19 RC C User Manual Audio Configure Speakers Configuration of speakers is very basic settings such as volume etc are controlled on the speaker units themselves 1 In the Management Application s navigation pane expand Advanced Configuration expand Hardware Devices and expand the hardware device to which the required speaker is attached 2 Right click the required speaker and select Properties 3 Specify properties as required 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Microphone Properties When you configure microphones properties are limited to e Enabled Microphones are
427. the Delete button is enabled allowing you to remove a slave server On Net Surveillance Systems Inc 73 RC C User Manual NetMatrix NetMatrix Video Sharing Configure NetMatrix The NetMatrix feature allows distributed viewing of live video from any camera to any NetMatrix recipient on a network operating with an RC C NVR Using NetMatrix is not necessary if using Ocularis NetMatrix Recipients Explained A computer on which NetMatrix triggered video can be viewed is known as a NetMatrix recipient In order to become a NetMatrix recipient the computer must have either the dedicated NetMatrix Monitor application or the multi purpose Ocularis Client installed Many users prefer the Ocularis Client for NetMatrix viewing purposes since they already use the Ocularis Client for viewing other types of surveillance video The NetMatrix Monitor however offers slightly more features including a pop up mode with which you will not see the NetMatrix Monitor window until there is video to display On the other hand the NetMatrix Monitor is meant for viewing only whereas with the Ocularis Client you are able to send video to other NetMatrix recipients For more information about NetMatrix recipients refer to the NetMatrix Monitor User s Manual and the Ocularis Client User s Manual available from www onssi com There are two ways in which NetMatrix triggered video can appear on a NetMatrix recipient e Manual triggering Another use
428. the internet e Internet port Lets you specify a port number for use when the should be available from the internet The default port number is 80 you can change the port number if port 80 is used for other purposes in your organization e Max number of clients Up to five clients at a time are able to connect to the surveillance system from a remote location Depending on your configuration and the performance of the hardware and network used limiting the number of simultaneously connected clients may help reduce server load If more than the allowed number of simultaneously connected clients attempt to log in only the allowed number of clients will be allowed access Any clients in excess of the allowed number will receive an error message when attempting to log in A four minute session timeout period applies for client sessions on In many cases client users may not notice this at all However the session timeout period will be very evident in some cases for example if you set the Max number of clients value to 1 When this is the case and the single allowed client user logs out four minutes must pass before it will be possible to log in again e Max number of clients You can limit the number of clients allowed to connect at the same time Depending on your configuration and the performance of the hardware and network used limiting the number of simultaneously connected clients may help reduce server load If more than the allowed num
429. the selected output to e the On manual activation list in which case the output will be available for manual activation in the Ocularis Client and or On Net Surveillance Systems Inc 36 RC C User Manual Camera Specific Properties e the On motion detected list in which case the output will be activated when motion is detected in video from the camera If required the same output can appear on both lists 3 Repeat for each required output If you later want to remove an output from the one of the lists simply select the output in question and click the lt lt button Motion Detection amp Exclude Regions When you configure video and recording for specific cameras adjusting motion detection is important since it may determine when video from the camera is recorded when e mail notifications are generated when hardware output Such as lights or sirens is activated etc Time spent on finding the best possible motion detection settings for each camera may help you later avoid unnecessary recordings notifications etc Depending on the physical location of the camera it may be a very good idea to test motion detection under different physical conditions day night windy calm weather etc Before you configure motion detection for a camera it is highly recommended that you have configured the camera s video properties such as compression resolution etc Cameras that do not support multiple simultaneous video streams
430. the sequence in which preset positions are presented in clients PTZ Patrolling PTZ related properties are only available when you are dealing with a PTZ Pan Tilt Zoom camera PTZ patrolling is the continuous movement of a PTZ camera between a number of preset positions To use patrolling you should normally have specified at least two preset positions for the PTZ camera in question To configure PTZ patrolling you basically select a patrolling profile in the Patrolling profiles list then specify required properties to define the exact behavior of the patrolling profile Tip Although it is technically not patrolling specifying a patrolling profile with only one preset position is possible A patrolling profile with only one preset position can when combined with scheduling be useful in two cases For moving a PTZ camera to a specific position at a specific time and for moving a PTZ camera to a specific position upon manual control of the PTZ camera Restart services after having made changes to PTZ settings When you have defined your patrolling profiles also remember to schedule the use of patrolling profiles keep in mind that patrolling can be overridden if users with the required rights manually operate PTZ cameras Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording S
431. there is less than 15 disk space left and the available disk space goes below 40 GB plus 2 GB per camera or o the available disk space goes below 225 MB plus 30 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 525 MB 225 MB plus 30 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 15 disk space left 2 If moving archives is not possible RC C will attempt to delete the oldest archives This will happen if o there is less than 10 disk space left and the available disk space goes below 30 GB plus 1 5 GB per camera or o the available disk space goes below 150 MB plus 20 MB per camera example with ten cameras the server would be running out of disk space if the remaining available disk space went below 350 MB 150 MB plus 20 MB for each of the ten cameras The difference ensures that very large disks will not necessarily be considered to be running out of disk space just because they have less than 10 disk space left IMPORTANT You will lose data from the archives being deleted 2 Ultimately if there are no archives to delete RC C will attempt to resize camera databases by deleting their oldest recordings This will happen if o there is less than 5 disk space left and the available disk space goes below 20 GB
432. therwise to all cameras attached to the hardware device e RetentionTime optional number Required retention time in minutes Remember that retention time is the total of recording time plus archiving time If specified as for example RetentionTime7 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegLiveFrameRate optional number Required MJPEG live frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If specified as for example MjpegLiveFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegRecordingFrameRate optional number Required MJPEG recording frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If you need to specify a value which includes a decimal separator use the full stop character example 7 62 If specified as for example MjpegRecordingFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionSensitivity optional number A value between 0 256 corresponds to using the Sensitivity slider when configuring motion detection settings in the Management Application If specified as for example MotionSensitivity1 information relates to a specific
433. third timer event trigger something else 2 minutes after the main event On Net Surveillance Systems Inc 51 RC C User Manual Events Input amp Output Add a Hardware Output With hardware output you can add external output units such as lights sirens door openers etc to your system Once added output can be activated automatically by events or detected motion or manually by client users Before you specify output verify that sensor operation is recognized by the hardware device with which you are going to use the output Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the release notes to verify that output controlled operation is supported for the hardware device and firmware used To add a hardware output event do the following 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Hardware Output and select Add New Output 2 Inthe Hardware Output Properties window s list of hardware devices select the required hardware device and click the Add button below the list 3 Specify required properties 4 Click OK 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar For information about how to configure automatic activation of hardware output when events occur see Configure Hardware Output on Event
434. through Telnet as if you were entering them directly on the server Windows includes a client for use with Telnet For this example we have created a generic event called Video Our generic event simply specifies that if the term video appears in a received TCP data package the generic event should be triggered Your generic event may be different but you can still use the principles outlined in the following steps 1 In the Management Application navigation pane expand Advanced Configuration then expand Cameras and Storage Information right click a camera to which you have access in the Ocularis Client and select Properties 2 Select Event Notification select the required generic event and click OK Make sure that your generic event is the only event appearing in the Selected Events list while you are performing the test otherwise you cannot be sure that it is your generic event which triggers the event notification Once you are done testing you can move any temporarily removed events back to the Selected Events list 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 4 Make sure the Recording Server service is running Also make sure that the camera for which you just configured the event notification is displayed in your Ocularis Client and that you have camera title bars enabled in your Ocularis Client so that you can see the yellow event indicator 5 In Window
435. ths you specify a number of different archiving paths usually across several drives Using dynamic paths is highly recommended and is the default setting when you configure cameras through the Configure Video amp Recording Wizard If the path containing the camera s database is on one of the drives you have selected for dynamic archiving RC C will always try to archive to that drive first If not RC C automatically archives to the archiving drive with the most available space at any time provided there is not a camera database using that drive Which drive that is used for archiving may change during the archiving process and archiving may therefore happen to several archiving drives during the same process This fact will have no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic archiving paths for individual cameras When deciding which drives to use for dynamic archiving consider the pros and cons in the following examples in which we assume that the default archiving path is on drive C drive letters are examples only different drive letters may of course be used in your organization Camera records to drive C and archives to drive C If the path containing the camera s database is on one of the drives you have selected for dynamic archiving RC C will always try to archive to that drive first Archiving will take place quickly but may
436. ting system may lock content in the database if a content file is open This would prevent archiving In practice this situation would only occur if somebody attempted to view a database file directly from the database folder at the time of the archiving viewing the file directly would actually not work since database content cannot be viewed as individual files only through the Ocularis Client In such situations the database will be put aside for archiving at a later point in time While the database is put aside a special temporary database is created for storage of new recordings This way no new recordings will be lost even though the original database is full provided enough disk space is available for storing the special temporary database RC C will wait for the next archiving occasion either scheduled or because the special temporary database also becomes full It will then archive the content of the special temporary database and thus free up space in it RC C will then continue to store new recordings in the special temporary database This will apply until the On Net Surveillance Systems Inc 177 RC C User Manual Configuration Recording Server service is restarted Once the service has been restarted the content of the original database will be archived and new recordings will again be stored in the original database The special temporary database will also be archived and will then cease to exist Can I view recordin
437. tion The following three scenarios are important to consider 1 Some cameras supporting multistreaming may have their frame rate reduced by half or respond with other negative effects when a second stream is opened 2 If a camera delivers live video in very high quality the de coding of images may increase the load on the Recording Server service This may in turn affect ongoing recordings negatively 3 Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ On Net Surveillance Systems Inc 198 RC C User Manual Contact Information Contact Information On Net Surveillance Systems OnSSI One Blue Plaza 7th Floor P O Box 1555 Pearl River NY 10965 Website www onssi com General info onssi com Fax Sales Support sales onssi com PreSales Support salesengineering onssi com Technical Support support onssi com Training training onssi com Marketing marketing onssi com On Net Surveillance Systems Inc 845 732 7900 845 732 7999 845 732 7900 845 732 7900 845 732 7900 845 732 7900 845 732 7900 x1 x2 x3 x4 x5 199
438. to the Recording path field You are only able to specify a path to a folder on a local drive If using a network drive it would not be possible to save recordings if On Net Surveillance Systems Inc 34 RC C User Manual Camera Specific Properties the network drive became unavailable If you change the recording path and there are existing recordings at the old location you will be asked whether you want to move the recordings to the new location recommended leave them at the old location or delete them Tip If you have several cameras and several local drives are available you can improve performance by distributing individual cameras databases across several drives e Delete Database Click button to delete all recordings in the database for the camera Archived recordings will not be affected IMPORTANT Use with caution all recordings in the database for the camera will be permanently deleted As a security measure you will be asked to confirm the deletion e Archiving path Only available if not using dynamic paths for archiving Path to the folder in which the camera s archived recordings should be stored Default is C VideoData Archives To browse for another folder click the browse button next to the Archiving path field You can specify a path to local or networked drive as required You can only specify a path to local drive If you change the archiving path and there are existing archived recordings at the old loc
439. to the associated camera s database This will affect the database s capacity for storing video You may therefore want to use scheduled archiving more frequently if recording audio and video than if only recording video On Net Surveillance Systems Inc 14 RC C User Manual Configuration amp Properties e Storage Capacity Required for Archiving The storage capacity required for archiving depends entirely on the amount of recordings you plan to keep and on how long you want to keep them also known as retention time Some organizations want to keep archived recordings from a large number of cameras for several months or years Other organizations may only want to archive recordings from one or two cameras and they may want to keep their archives for much shorter periods of time You should always first consider the storage capacity of the local drive containing the default archiving directory to which archived recordings are always moved even though they may immediately after be moved to an archiving location on another drive As a rule of thumb the capacity of the local drive should be at least twice the size required for storing the databases of all cameras You cannot archive to external drives only to local drives on the RC C server When archiving RC C automatically checks that space required for the data to be archived plus 1 GB of free disk space per camera is available at the archiving location If not the archive locati
440. to using the Motion slider when configuring motion detection settings in the Management Application If specified as for example MotionDetectionThreshold1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MotionDetectioninterval optional number Lets you specify how often motion detection analysis should be carried out on video from the camera Specified in milliseconds The interval is applied regardless of the camera s frame rate settings If specified as for example MotionDetectionInterval1 information relates to a specific camera otherwise to all cameras attached to the hardware device e ServerName Name of the NVR that will appear when listed in clients Name must be unique and must not contain any of the following special characters lt gt amp e ServerPort Port number to use for communication between the NVR server and clients e OnlineVerification If this parameter is used all online hardware devices found using HardwareOldMacAddress are updated All other hardware devices are not updated Any character means yes use online verification Existing configuration parameters that are not specified in CSV file will remain unchanged If a parameter value for an individual camera in the CSV file is empty the existing parameter value will remain unchanged on that camera Most system integrators store hardware device information in spreadsheets like Microsoft E
441. ture camera D is not a PTZ camera If you select both camera C and camera D in the list the PTZ preset positions check box will be square filled On Net Surveillance Systems Inc 100 RC C User Manual Drivers Drivers Update Video Device Drivers Video device drivers are small programs used for controlling communicating with the camera devices connected to the RC C NVR Video device drivers are installed automatically during the initial installation of the NVR software However new versions of video device drivers called Device Packs are released and made available for free on the OnSSI website from time to time We recommend that you always use the latest version of video device drivers When updating video device drivers there is no need to remove the old video device drivers first simply install the latest version on top of any old version you may have IMPORTANT When you install new video device drivers your system will not be able to communicate with camera devices from the moment you begin the installation until the moment installation is complete and you have restarted the Recording Server service Usually the process takes no longer than a few minutes but it is highly recommended that you perform the update at a time when you do not expect important incidents to take place 1 Onthe NVR server on which you want to install the new video device drivers version shut down any running surveillance software including any
442. tween the quotation marks must appear together in the package in the specified sequence in order to match your criterion If the terms must appear in the package but not necessarily in any exact sequence add the terms one by one that is so they will appear as User001 Door053 Sunday in the Event message expression field Tip It is OK for TCP and UDP packages used for generic events to contain special characters such as a etc within the text string to be analyzed Event message expression Displays the string which will be used for the actual package analysis The field is not directly editable However you can position the cursor inside the field in order to determine where a new item should be included when you click the Add button or one of the parenthesis or operator buttons described in the following Likewise you can position the cursor inside the field in order to determine where an item should be removed when clicking the Remove button The item immediately to the left of the cursor will be removed when you click the Remove button Oo Lets you add a start parenthesis character to the Event message expression field Parentheses can be used to ensure that related terms are processed together as a logical unit in other words they can be used to force a certain processing order in the analysis Example If using User001 OR Door053 AND Sunday the two terms inside the parenthesis will be processed first then th
443. type number The default name format Example Camera 1 o Custom text Device type number Names will consist of a text of your choice specified in the Custom text field followed by a dash type information and a number Example Airport Security Camera 1 o Address Device type number Names will consist of the hardware device address followed by a dash type information and a number Example 10 10 123 73 Camera 1 o Custom text Address Device type number Names will consist of a text of your choice specified in the Custom text field followed by a dash then the hardware device address followed by a dash type information and a number Example Airport Security 10 10 123 73 Camera 1 o Hardware model Device type number Names will consist of hardware device model information followed by a dash type information and a number Example Axis P1311 Camera 1 o Hardware model Custom text Device type number Names will consist of hardware device model information followed by a dash then a text of your choice specified in the Custom text field a dash type information and a number Example Axis P1311 Airport Security Camera 1 o Hardware model Address Device type number Names will consist of hardware device model information followed by a dash then the hardware device address a dash type information and a number Example Axis P1311 10 10 123 73 Camera 1 Tip Need other name formats Rem
444. u then select Folder Options then the View tab Scroll to the bottom of the tab s Advanced Settings list and make sure that the Use simple file sharing check box is cleared When ready click OK and close the window Add Windows users the following way 1 Click the Add Windows User button to open the Select Users or Groups dialog Select Users or Groups Jeg Select the object type Users ot Groupe Diyect Types Erom thes locaton MM01232 Locetons j Enter the object names to select cib Advanced Cancel On Net Surveillance Systems Inc 160 RC C User Manual Configuration Note that you will only be able to make selections from the local computer even if you click the Locations button 2 Inthe Enter the object names to select box type the required user name s then use the Check Names feature to verify that the user name s you have entered are correct If typing several user names separate each name with a semicolon Example Brian Hannah Karen Wayne 3 When ready click OK When a user who has been added this way logs in with a client the user should not specify any server name PC name or IP address as part of the user name Example of a correctly specified user name USERO01 Example of an incorrectly specified user name PC001 USER001 The user should of course still specify a password and any required server information Any prerequisites for adding users from a local database The users must
445. u configure similar properties quickly For instance if you have 8 cameras and you want a particular default microphone for all of them Instead of having to enter the same piece of information eight times you can simply enter it once in the template and then apply the template to the 8 cameras with only two clicks e Apply Template Lets you select which cameras you want to apply the template for You then use one of the two Set buttons see descriptions in the following to actually apply the template Tip To select all cameras in the list click the Select All button e Camera Name Name of the camera as it will appear in the Management Application as well as in clients If required you can overwrite the existing camera name with a new one Camera names must be unique and must not contain any of the following special characters lt gt amp e Default Microphone Select required default microphone Tip Note that you can select a microphone attached to another hardware device than the selected camera itself This also applies when selecting default speakers e Default Speaker Select required default speaker e Camera Click the Open button to configure detailed and or camera specific settings such as event notification PTZ preset positions etc for the selected camera e Select All Click button to select all cameras in the Apply Template column e Clear All Click button to clear all selections in the Apply Te
446. u have previously configured click the Add button and specify required properties When ready click OK and save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Tip You can add as many timer events as required under an event This way you can for example make one timer event trigger something 10 seconds after the main event another timer event trigger something else 30 seconds after the main event and a third timer event trigger something else 2 minutes after the main event Add Audio Sources You add cameras and other hardware devices such as video encoders DVRs etc to the system through the Add Hardware Devices wizard If microphones and or speakers are attached to a hardware device they are automatically added as well When managing microphones and speakers it is important to remember the basic concepts e Microphones are attached to hardware devices and are typically physically located next to cameras They generally record what people near a camera are saying Operators with the necessary rights can then listen to these recordings through their Ocularis Client provided the computer running the Ocularis Client has speakers attached It is only possible to have one microphone enabled at a time On Net Surveillance Systems Inc 168 RC C User Manual Configuration e Speakers are also attached to devices and also typically physically located next to cameras T
447. uld the database resizing procedure take place you will be informed in log files and if set up through an e mail and or SMS notification Disable or Delete Cameras All cameras are enabled by default This means video from the cameras can be transferred to the NVR provided that the cameras are scheduled to be online To disable a camera 1 In the Management Application s navigation pane expand Advanced Configuration expand Cameras and Storage Information double click the camera you want to disable and clear the Enabled checkbox 2 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar To delete a camera you technically have to delete the hardware device Deleting the hardware device will also delete any attached speakers and microphones If you do not want this consider disabling the camera instead Wizards Configure Video amp Recording Wizard The Configure Video and Recording wizard helps you quickly configure your cameras video and recording properties The wizard is divided into a number of pages e Video Settings and Preview e Online Schedule e Live and Recording Settings Motion JPEG Cameras e Live and Recording Settings MPEG Cameras e Drive Selection Recording and Archiving Settings Adjust Motion Detection Wizard The Adjust Motion Detection wizard helps you quickly configure your cameras motion detection properties The wizard is
448. ult selection is Always on meaning that new cameras will always be online that is transferring video to the NVR server for live viewing and further processing Maximum delay between reconnect attempts Lets you control the aggressiveness of reconnection attempts If the NVR loses the connection to a camera by default it will attempt to re establish the connection after ten seconds In some environments for example if using vehicle mounted cameras through wireless connections camera connections may frequently be lost and you may want to change the aggressiveness of such reconnection attempts On Net Surveillance Systems Inc 78 RC C User Manual Scheduling Archiving As a camera s database becomes full its recordings will automatically be archived You are furthermore able to schedule archiving at particular points in time every day This way you can proactively archive recordings so databases will never become full As a rule of thumb the more you expect to record the more often you should archive e Archiving Time The Archiving Times list shows the times at which you want to automatically archive the content of all camera databases on the recording server You can do this up to 24 times per day with minimum one hour between each one To add archiving times to the list 1 Specify required time in the time box to the right of the Archiving Times list You specify the required time by selecting the hour minute and second valu
449. uote encapsulated value e cam era is not valid as the two quotes are separated with a space and quotes cannot be nested e cam er a is not valid as you cannot nest quotes e cam era is not valid as there are characters outside the quotes On Net Surveillance Systems Inc 90 RC C User Manual Daylight Savings Time Daylight Savings Time Daylight savings time DST also known as summer time is the practice of advancing clocks in order for evenings to have more daylight and mornings to have less Typically clocks are adjusted forward one hour sometime during the spring season and adjusted backward sometime during the fall season hence the saying spring forward fall back Note that use of DST varies between countries regions Uy Clocks are adjusted forward when DST starts When working with a surveillance system which is inherently time sensitive it is important to know how the system handles DST Spring Switch from Standard Time to DST The change from standard time to DST is not much of an issue since you jump one hour forward Typically the clock jumps forward from 02 00 standard time to 03 00 DST and the day thus has 23 hours In that case there is simply no data between 02 00 and 03 00 in the morning since that hour for that day did not exist Fall Switch from DST to Standard Time When you switch from DST to standard time in the fall you jump one hour back Typically the clock jumps backward from
450. up several similar systems See Add Hardware Devices Wizard Import from CSV File Add User Groups User groups are logical groups created and used for practical purposes in the Management Application only They are not in any way connected with user groups from central directory services such as for example Active Directory By grouping users you can specify rights for all users within a group in one step If you have many users performing similar tasks this can save you significant amounts of work Make sure you add groups before you add users You cannot add existing users to groups 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New User Group 2 Specify a name for the group Group names must be unique and must not contain the following characters lt gt amp 2 2 T 3 Click OK 4 Specify General Access and Camera Access properties These properties will determine the rights of the group s future members 5 Click OK 6 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar 7 Now you can add users to the group In the navigation pane right click the group you just created and Add Basic Users or Add Windows Users as required Add Windows Users When adding Windows users you import users defined locally on the server or users from Active Directory and authenticate them ba
451. ur criterion If the terms must appear in the package but not necessarily in any exact sequence add the terms one by one that is so they will appear as User001 Door053 Sunday in the Event message expression field On Net Surveillance Systems Inc 125 RC C User Manual Configuration Tip It is OK for TCP and UDP packages used for generic events to contain special characters such as a etc within the text string to be analyzed Event message expression Displays the string which will be used for the actual package analysis The field is not directly editable However you can position the cursor inside the field in order to determine where a new item should be included when you click the Add button or one of the parenthesis or operator buttons described in the following Likewise you can position the cursor inside the field in order to determine where an item should be removed when clicking the Remove button The item immediately to the left of the cursor will be removed when you click the Remove button O Lets you add a start parenthesis character to the Event message expression field Parentheses can be used to ensure that related terms are processed together as a logical unit in other words they can be used to force a certain processing order in the analysis Example If using User001 OR Door053 AND Sunday the two terms inside the parenthesis will be processed first then the result will be combined with th
452. ures Available in the following for more information e Making New Features Available Making new features including new language versions available to your organization s users involves two procedures First you install the required features on the surveillance system server You then use the NVR Download Manager to fine tune which features should be available in the various language versions of the welcome page Installing New Features on Server If the NVR Download Manager is open close it before installing new features on the server To install a feature from the Installers folder select the required language sub folder then double click the required installation exe file When a new feature has been installed on the surveillance system server you will see a confirmation dialog If required you can open the NVR Download Manager from the dialog Making New Features Available through the Download Manager When you have installed new features such as language packs etc by default they will be selected in the NVR Download Manager and thus immediately be available to users via the welcome page You can always show or hide features on the welcome page by selecting or clearing check boxes in the NVR Download Manager s tree structure Tip You can change the sequence in which features and languages are displayed on the welcome page In the NVR Download manager s tree structure simply drag items and drop them at the required po
453. urrent list of IDs view the release notes for the Device Pack used in your organization Alternatively visit the OnSSI website for the latest information 360 Vision IP Dome 320 ACTi ACM 5600 series 105 ACTi CAM 6210 105 ACTi ACD 2100 105 ACTi ACM 5711 105 ACTi CAM 6220 105 ACTi ACD 2200 173 ACTi ACM 7400 series 105 ACTi CAM 6230 105 ACTi ACD 2300 152 ACTi ACM 7511 105 ACTi CAM 6500 105 ACTi ACD 2400 228 ACTi ACM 8100 series 105 ACTi CAM 6510 105 ACTi ACM 1011 105 ACTi ACM 8200 series 105 ACTi CAM 6520 105 ACTi ACM 1100 series 105 ACTi CAM 5100H 105 ACTi CAM 6600 105 ACTi ACM 1230 series 105 ACTi CAM 5100M 105 ACTi CAM 6610 105 ACTi ACM 1310 series 105 ACTi CAM 5100S 105 ACTi CAM 6620 105 ACTi ACM 1430 series 105 ACTi CAM 5120 105 ACTi CAM 6630 105 ACTi ACM 1511 105 ACTi CAM 5130 105 ACTi CAM 7100 series 105 ACTi ACM 3001 105 ACTi CAM 5140 105 ACTi CAM 7200 series 105 ACTi ACM 3011 105 ACTi CAM 5150 105 ACTi CAM 7300 series 105 ACTi ACM 3100 series 105 ACTi ACM 3210 series 105 ACTi ACM 3300 series 105 ACTi ACM 3400 series 105 ACTi ACM 3511 105 ACTi ACM 3701 105 ACTi ACM 4000 series 105 ACTi ACM 4100 series 105 ACTi ACM 4200 series 105 ACTi ACM 5001 105 On Net Surveillance Systems Inc ACTi CAM 5200 series 105 ACTi CAM 5220 series 105 ACTi CAM 5300 series 105 ACTi CAM 5320 series 105 ACTi CAM 5500 105 ACTi CAM 5520 105 ACTi CAM 6100 105 ACTi CAM 6110 105 ACTi CAM 6120 105 ACTi CAM 6200 105 ACTi SED 2100R 105 ACTi SED 210
454. us scanning software on the server with the RC C software it is likely that the virus scanning will use a considerable amount of system resources on scanning data from the NVR Download Manager If allowed in your organization disable virus scanning on all or parts of the RC C server For more information see Virus Scanning Information On Net Surveillance Systems Inc 107 RC C User Manual Recording Server Manager Recording Server Manager Using the Recording Server Manager The Recording Server service is a vital part of the surveillance system video streams are only transferred to the NVR while the Recording Server service is running The Recording Server Manager informs you about the state of the Recording Server service It also lets you manage the service In the notification area a k a system tray the Recording Server Manager s icon indicates whether the Recording Server service is running or not Green indicates running default red indicates not running Ry By right clicking the icon you can start and stop the Recording Server service view log files etc e Start the Recording Server Service 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select Start Recording Server Service 3 The icon in the notification area changes to green Ry e Stop the Recording Server Service 1 Right click the notification area s Recording Server icon 2 Inthe menu that appears select St
455. utually exclusive When you select one type of input you may therefore note that other types of input become unavailable for selection 4 For each selected type of input select required properties When ready click OK or click the Add button to add a timer event to the event you have just created 5 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar Add a Hardware Output With hardware output you can add external output units such as lights sirens door openers etc to your system Once added output can be activated automatically by events or detected motion or manually by client users Before you specify output verify that sensor operation is recognized by the hardware device with which you are going to use the output Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the release notes to verify that output controlled operation is supported for the hardware device and firmware used To add a hardware output event do the following 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Hardware Output and select Add New Output 2 Inthe Hardware Output Properties window s list of hardware devices select the required hardware device and click the Add button below the list 3 Specify required properties 4 Click OK
456. vailable e Live frame rate Speedup frame rate for viewing live video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field The frame rate must be higher than the live frame rate specified under normal mode e Recording frame rate Speedup frame rate for viewing recorded video from the camera Select number of frames in the first field and required interval per second minute or hour in the second field The frame rate must be higher than the recording frame rate specified under normal mode e On motion Select this check box to use the speedup frame rates when motion is detected The camera will return to the normal frame rates two seconds after the last motion is detected e On event Select this check box to use the speedup frame rates when an event occurs and until another event occurs Use of speedup on event requires that events have been defined and that you select start and stop events in the neighboring lists Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e Start event Select required start event The camera will begin using the speedup frame rates when the start event occurs e Stop event Select required start event The camera will return to the normal frame rates when the stop event occurs Tip Speedup does not necessarily have to be based on motion
457. ve Directory a server with Active Directory installed and acting as domain controller must be available on your network Consult your network administrator if in doubt Can add groups from Active Directory You can only add individual users from Active Directory to Active Directory also supports groups of users but you cannot add such groups to You can however group individual users in and quickly assign common user rights for all users within such groups 1 In the Management Application s navigation pane expand Advanced Configuration right click Users and select Add New Windows User This will open the Select Users or Groups window Select Users or Groups Axi Select thet object ype Users Groups of Bulls secunty pencipals Object Types From thes location Ent Deen Enter the object names to select fmc Conca By default you will be able to make selections from your entire directory If you want to narrow this click the Select Users and Groups window s Locations button and select the location you require 2 Inthe Enter the object names to select box type the required user names then use the Check Names feature to verify that the user names you have entered are recognized Example Rich Matthew Marc Ari 3 When ready click OK 4 Specify General Access and Camera Access properties These properties will determine the rights of the user 5 Click OK 6 Save your configuration changes by clicki
458. ver The port number must match the port number specified on the NetCentral server itself Default port is 1237 NetMatrix Event Control There are two ways in which NetMatrix triggered video can appear in a NetMatrix recipient e Another user wants to share important video and sends it to the required NetMatrix recipient from a Ocularis Client or from a custom made web page see NetMatrix Recipients Properties e Video is sent to the required NetMatrix recipient automatically when a predefined event occurs The NetMatrix Event Control tab is used for configuring the automatic sending of live video based on predefined events it lets you define exactly which events and cameras to use on a per NetMatrix recipient basis The NetMatrix Event Control tab displays the list of NetMatrix recipients defined on the NetMatrix Recipients tab tr Com ee ee amp Moten on Bock Doce West Wig Camera d Pp Correct Back Door West Wing Camera b amp Moten on Back Doce East Wing Camera bp Corect Back Doce Ean Wing Caneta a fhar Camera c amp Mon on Man Olicej Camas 1 Pp Correct gt Man Ofice Cames 1 Right clicking a NetMatrix recipient brings up a list of devices with belonging events When you select an event it will initially be highlighted by a red exclamation mark indicating that there is additional configuration to be done Right clicking an event brings up a list of options for the selected event FJ Alum
459. vices it is necessary for the surveillance system to regularly check the state of the hardware devices input ports in order to detect whether input has been received Such state checking at regular intervals is called polling The interval between state checks called a polling frequency is specified as part of RC C s general ports amp polling properties For such I O hardware devices the polling frequency should be set to the lowest possible value one On Net Surveillance Systems Inc 58 RC C User Manual Hardware Devices tenth of a second between state checks For information about which I O hardware devices require polling see the release notes Replace Hardware Devices If required you can replace a hardware device which you have previously added to and configured on your surveillance system uwith a new one This can typically be relevant if you replace a physical camera on your network The Replace Hardware Device wizard helps you through the entire replacement process on the surveillance system server including e Detecting the new hardware device e Specifying license for the new hardware device e Deciding what to do with existing recordings from the old hardware device You access the Replace Hardware Device wizard from the Management Application s navigation pane Expand Advanced Configuration expand Hardware Devices right click the hardware device you want to replace and select Replace Hardware Device You can a
460. video Why are some feature check boxes filled with squares Square tfilled check boxes can appear in the lower part of the window if you have selected several cameras and a feature applies for some but not all of the cameras Example For camera A you have selected that use of the Events is allowed for camera B it is not allowed If you select both camera A and camera B in the list the Events check box in the lower part of the window will be square filled Another example Camera C is a PTZ camera for which you have allowed the PTZ preset positions feature camera D is not a PTZ camera If you select both camera C and camera D in the list the PTZ preset positions check box will be square filled Dynamic Path Selection With dynamic archiving paths you specify a number of different archiving paths usually across several drives If the path containing the video database is on one of the drives you have selected for archiving the attempt to archive that drive first will always be made If not the archive will be made to the archiving drive with the most available space at any time provided there is not a camera database using that drive Which drive that is may change during the archiving process and archiving may therefore happen to several archiving drives during the same process This fact will have no impact on how users find and view archived recordings Dynamic archiving paths are general for all your cameras you cannot configure dynamic arc
461. wMac1 information relates to a specific camera otherwise to all cameras attached to the hardware device Valid options are Delete deletes old recordings Leave leaves old recordings for offline investigation but unavailable for online system or Inherit renames all old recording folders according to the new MAC address thus making them available for the online system e RetentionTime optional number Required retention time in minutes Remember that retention time is the total of recording time plus archiving time If specified as for example RetentionTime7 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegLiveFrameRate optional number Required MJPEG live frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If specified as for example MjpegLiveFrameRate1 information relates to a specific camera otherwise to all cameras attached to the hardware device e MjpegRecordingFrameRate optional number Required MJPEG recording frame rate in number of frames depending on what has been configured on the camera it will then know whether it is frames per second minute or hour If you need to specify a value which includes a decimal separator use the full stop character example 7 62 If specified as for example MjpegRecordingFrameRate1 information relates to a specific camera
462. ware devices such as video encoders DVRs etc to your system If microphones and or speakers are attached to a hardware device they are automatically added as well e The Configure Video and Recording wizard helps you quickly configure your cameras video and recording properties e The Adjust Motion Detection wizard helps you quickly configure your cameras motion detection properties e The Configure User Access Wizard helps you quickly configure clients access to the server On Net Surveillance Systems Inc 12 RC C User Manual Configuration amp Properties Configuration amp Properties Archiving Extends Recording Storage Archiving is an integrated and automated feature that helps you store recordings beyond the capabilities of NVR s standard database Archiving maximizes storage capacity and minimizes risk you can keep recordings for as long as required limited only by the available hardware storage capacity Have you used archiving in other NVRs In that case note that RC C automatically archives recordings if a camera s database becomes full Also note that retention time is likely to affect when archiving will take place Retention time is the total amount of time for which you want to keep recordings from a camera that is recordings in the camera s database as well as any archived recordings In other NVRs time limits may need to be specified separately for the database and archives with RC C you only s
463. when the following conditions apply o the Recording Server service is running o motion is detected or an event for which the sending of an e mail notification has been defined occurs motion is detected within a period of time for which an e mail notification schedule has been defined 3 Specify required properties including the important information about which SMTP mail server to use When ready click OK Tip You can test your e mail notification configuration by clicking the Test button this will send a test e mail to the specified recipients 4 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar When configuring e mail alerts also consider the e mail notification schedules configured for each camera Configure SMS Mobile Text Notifications With SMS mobile phone text message notifications you or a colleague can instantly get notified when your surveillance system requires attention The NVR can automatically send SMS notifications to one or more recipients when e Motion is detected e Events occur you can select individually for each event whether you want to receive an e mail notification or not thus avoiding irrelevant SMS messages e Archiving fails if SMS notification has been selected as part of the archiving properties Use of the SMS notification feature requires that an external Siemens TC 35 GSM modem has been attached to a serial port
464. when you specify a name 3 Inthe top right corner of the dialog select Set camera to start stop on time to base subsequent settings on periods of time or Set camera to start stop on event to base subsequent settings on events within periods of time Tip You can combine the two so you may return to this step in order to toggle between the two options 4 Inthe calendar section place your mouse pointer at a required start point then hold down the left mouse button drag the mouse pointer and release at the required end point e You specify each day separately e You specify time in increments of five minutes tool tips help you by showing the time over which your mouse pointer is positioned 06 00 O800 peapa G35 s e f you base your schedule profile or parts of it on events within periods of time remember to select Start event and Stop event from the lists below the calendar section Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields e To delete an unwanted part of a schedule profile right click it and select Delete e To quickly fill or clear an entire day double click the name of the day e As an alternative to dragging inside the calendar section use the Start time End time and Day fields then the Change Period or Set Period button as required When using the Start time and End time fields remember that time is specifie
465. which handles clients access to the surveillance system 1 In the Management Application s navigation pane expand Advanced Configuration right click Server Access and select Properties 2 Specify required properties for Server Access Local IP Ranges and Language Support amp XML Encoding When ready click OK 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 184 RC C User Manual Configuration When using this option you configure client users separately from clients access see Add Individual Users Add User Groups and Configure User amp Group Rights Configure SMS Mobile Text Notifications With SMS mobile phone text message notifications you or a colleague can instantly get notified when your surveillance system requires attention The NVR can automatically send SMS notifications to one or more recipients when e Motion is detected e Events occur you can select individually for each event whether you want to receive an e mail notification or not thus avoiding irrelevant SMS messages e Archiving fails if SMS notification has been selected as part of the archiving properties Use of the SMS notification feature requires that an external Siemens TC 35 GSM modem has been attached to a serial port a k a COM port on the RC C server Siemens TC 35 is a dual band EGSM900 GSM1800 modem verify that the modem is
466. will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application e How to Configure Motion Detection Properties 1 Determine whether there are any areas which should be excluded from motion detection for example if the camera covers an area where a tree is swaying in the wind or where cars regularly pass by in the background If so you can avoid detection of irrelevant motion by following the points below If not continue to step 2 e Inthe Exclude regions section in lower part of the window select Enable The preview image is now divided into small sections by a grid To define areas which should be excluded from motion detection drag the mouse pointer over the required areas in the preview image while pressing the mouse button down Left mouse button selects a grid section right mouse button clears a grid section Selected areas are highlighted in blue Occasionally you may also want to take advantage of further exclude regions features e Show grid Lets you toggle the grid on and off Toggling the grid off may provide a less obscured view of the preview image selection of areas which should be excluded from motion detection takes place the same way as when the grid is visible e Set All Lets you quickly select
467. x Event Control we 133 NetMatrix Recipients we 134 Network Device Type amp License we 135 OME SOD Ae tects ceecvctacc tetviccateds ftehoneeeuuedadeLencd es taba Medes a on tue A Nags cae 135 OIOI oI AE TA EE EA TEE 136 Ports amp Polling we 137 PTZ Device vie 137 PTZ on Event PTZ Patrolling PTZ Patrolling was PTZ Preset Positions 141 Recording amp Archiving Paths Recording amp Archiving Paths 144 Recording Settings wee 145 Scheduling All Cameras aiaeei caine cand aca ie peace nine ean a r i aedi aa 146 Scheduling Options irin snn en Nae ea n Ai Sea es a a E Neavtenyeadevcvestediyeceeeenteedanii 147 Server ACCESS ses Saves iecsei cose e a is caceesteba day cebu cha ae a sas dines lab vee dap a a a cescda dan sarees Gui ebeesdsdbsauedincvvedveciaduadaasest 147 On Net Surveillance Systems Inc vi RC C User Manual Table of Contents SMS Notifications pann le aie decd a ed ed ee dE EEA 148 SMS Notification cece ceceeseseceeeeeeeeeeeeeeeeeeeseeaeeeaeeaeeaeeaeeseesaecaeseaeseeeaesaeseeesaeeeesaeseeeaeseseeseeesaeseeeaeeeseaeeaeseeeeaesneeeaeeneeeas 148 Speaker Properties 149 Speedup eeeeeeeeee we 149 Storage Information 150 Timer Event 150 User Information 150 VIdCO se veccerecvertnteihed died tate lourstavd teeters ieta daise tat diae e deadar ndie iiaia nents rede s e
468. xcel from which they can save the information as comma separated values in a CSV file These examples show hardware information in Excel 1 and when exported to a CSV file 2 note the header lines On Net Surveillance Systems Inc 89 RC C User Manual System Restoration amp Migration a A B j C HardwareOldMacAddress HardwareNewMacAddress HardwareAddress Carr ace AD 19 08 11 B7 11 192 168 1 101 Cas 3 DE A9 11 07 4B 11 A9 AD DD 11 87 AA4 192 169 1 3 Cast 1 4 111 A900 FFANNR7 AT AA 44 ROCC RT 1909 IRA 135 Hardwareo ldMacAddress HardwarenewMacaddr ess HardwareaAddre 00 11 08 11 87 49 40 19 08 11 67 11 192 168 1 101 Cashier DE 49 11 07 46 11 A9 AD 00 11 87 44 192 168 1 93 Cashier 11 AO OQ Ce ONR7 An 17 RPO CC R7 107 168 1 25 emera Whichever method is used the following applies e The first line of the CSV file must contain the headers and subsequent lines must contain information about one hardware device each e Separators can be commas semicolons or tabs but cannot be mixed e All lines must contain valid values pay special attention to the fact that camera names user names etc must be unique and must not contain any of the following special characters lt gt amp IT e There is no fixed order of values and optional parameters can be omitted entirely e Boolean fields are considered true unless set to 0 false or no e Lines containing only separators are ignored
469. y at each preset position before it moves on to the next preset position Default is 10 seconds The wait time applies to all presets in the patrolling profile that is the PTZ camera will stay at each preset position for the same number of seconds e Transition time sec Lets you specify the number of seconds required for the PTZ camera to move from one preset position to another Default is five seconds During this transition time motion detection is automatically disabled as irrelevant motion is otherwise likely to be detected while the camera moves between the preset positions After the specified number of seconds motion detection is automatically enabled again The transition time applies to all presets in the patrolling profile It is thus important that the camera is able to reach between any of the patrolling profile s preset positions within the number of seconds you specify If not false motion is likely to be detected keep in mind that it takes longer for the PTZ camera to move between positions that are located physically far apart for example from an extreme left position to an extreme right position than between positions that are located physically close together On Net Surveillance Systems Inc 139 RC C User Manual Configuration Tip Note that wait time and transition time settings are tied to the selected patrolling profile This allows you the flexibility of having different wait time and transition time settings for
470. y before an event took place from the camera to the surveillance system via e mail A new log file is created for each day the service is used You cannot disable this type of logging Image Import service log files are named according to the structure lmagelmportLog_YYYMMDD log for example ImagelmportLog20101231 log e Event log files These files log information about registered events A new log file is created for each day on which events occur You cannot disable this type of logging e Audit log files These files log Ocularis Client user activity provided audit logging is enabled A new log file is created for each day with audit logging enabled and client user activity Audit log files are named according to the structure is_auditYYYMMDD log for example is_audit20101231 log The _is prefix is due to the fact that the audit log files are generated by the Image Server service e Log Locations By default all log files are placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista In XP or 2003 Server the directory is C Documents and Settings All Users Application Data OnSSI Recorders RC C They are stored for seven days by default Note however that log file locations as well as the number of days to store the logs can be changed as part of the logging configuration e Log Structures Most log files generated by the NVR use a shared structure compl
471. y configure clients access to the server Add a Generic Event The RC C NVR is able to analyze received TCP and or UDP data packages and automatically trigger events when specified criteria are met This way you can easily integrate your surveillance system with a very wide range of external sources for example access control systems alarm systems etc Events based on the analysis of received TCP and or UDP packets are called generic events 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Generic Events and select Add New Generic Event 2 Inthe Generic Event Properties window click the Add button and specify required properties When ready click OK or click the Add button to add a timer event to the event you have just created 3 Save your configuration changes by clicking the Save Configuration button in the Management Application s toolbar On Net Surveillance Systems Inc 165 RC C User Manual Configuration Test a Generic Event Once you have added a generic event a quick and easy way to test your generic event is to first set up an event notification and then use Telnet to send a small amount of data which will trigger the generic event and in turn the event notification What is Telnet Telnet is a terminal emulation program used on TCP IP networks With Telnet you can connect to a server from a computer on the network and execute commands
472. y organizations use the hardware device manufacturer s default user names for their hardware devices If that is the case in your organization select lt default gt do not type a manufacturer s default user name as this can be a source of error trust that the software will know the manufacturer s default user name Other typical user names such as admin or root are also selectable from the list If requiring a user name which is not on the list simply type the required user name Tip User names you type yourself will subsequently be added to the list so you can easily select them later Password Password for the hardware device s administrator account a k a the root password Hardware type Read only field displaying the type of video device driver used for communication with the hardware device Serial number MAC address Read only field displaying the serial number of device The serial number is usually identical to the 12 character hexadecimal MAC address of the hardware device example 0123456789AF Device license key DLK The 16 character license key DLK which gives you the right to use the hardware device with RC C Replace Hardware Device Opens a wizard with which you if required can replace the selected hardware device with another one This can typically be relevant if you replace a physical camera on your network The wizard helps you take all relevant issues into account finding the DLK for the new hardware dev
473. ying with the W3C Extended Log File Format Each log file consists of a header and a number of log lines e The header outlines the information contained in the log lines e The log lines consist of two main parts the log information itself as well as an encrypted part The encrypted part makes it possible through decryption and comparison to assert that a log file has not been tampered with e Log Integrity Checks All log files except Management Application log files are subjected to an integrity check once every 24 hours The integrity check is performed by RC C s Log Check service The result of the integrity check is automatically written to a file named according to the structure LogCheck_YYYYMMDD log for example LogCheck_20101231 log Like the log files themselves the log check files are by default placed in the appropriate All Users folder for the operating system used for example C ProgramData OnSSl Recorders RC C if running Windows Vista Any inconsistencies will be reported in the form of error messages written in the log check file Possible error messages other non error messages may also appear in the log check file e Log integrity information was not found Log integrity can t be guaranteed The log file could not be checked for integrity e Log information does not match integrity information Log integrity can t be guaranteed The log file exists but does not contain the expected information Thus log integ
474. you are not limited to selecting events defined on a particular hardware device 1 Inthe Events list in the left side of the window select the required event Tip If you have not yet defined any suitable events you can quickly do it Use the Configure events list located below the other fields 2 Inthe PTZ Preset Position list in the right side of the window select the required preset position For this purpose you can only use an event once per PTZ camera However different events can be used for making the PTZ camera go to the same preset position Example e Event 1 makes the PTZ camera go to preset position A e Event 2 makes the PTZ camera go to preset position B e Event 3 makes the PTZ camera go to preset position A If you later want to end the association between a particular event and a particular preset position simply clear the field containing the event Restart services after having made changes to PTZ settings Cameras that do not support multiple simultaneous video streams will not be able to connect to the surveillance server and the Management Application at the same time therefore it is recommended to stop the Recording Server service when configuring such devices for motion detection and PTZ See also View Video from Cameras in Management Application PTZ Patrolling PTZ related properties are only available when you are dealing with a PTZ Pan Tilt Zoom camera PTZ patrolling is the continuous movement of a
475. you backed up the file devices ini copy the file into C Program Files OnSSI RC C devices On Net Surveillance Systems Inc 111 RC C User Manual Removal Removal Entire System Remove Entire Surveillance System To remove the entire NVR system that is the surveillance server software and related installation files and video device drivers from your server do the following What happens to recordings Your recordings will not be removed they will remain on the server even after the server software has been removed Likewise the RC C configuration file will remain on the server this allows you to reuse your configuration if you later install RC C again 1 Shut down all RC C components 2 In Windows Start menu select Control Panel and select Add or Remove Programs 3 Inthe Add or Remove Programs window s list of currently installed programs select the RC C system entry not the RC C entry and click the Change Remove button 4 The setup wizard appears click the Next button then the Remove button 5 Select Remove entire surveillance system then click Next and complete the wizard s remaining steps Individual Components Remove Installation Files for End User Features When you have installed RC C your surveillance system server contains installation files for a number of end user features by default The installation files lets you install the end user features on the surveillance system server and make them
476. your input is not sent to the surveillance system until you close the window 9 Log in to the Ocularis Client If the yellow event indicator lights up for the required camera your generic event works as intended Add a Hardware Input Event With hardware input events you can turn input received from input units attached to hardware devices into NVR events Before you specify input for a hardware device verify that sensor operation is recognized by the hardware device Most hardware devices are capable of showing this in their configuration interfaces or via CGI script commands Also check the release notes to verify that input controlled operation is supported for the hardware device and firmware used To add and or configure a hardware input event do the following 1 In the Management Application s navigation pane expand Advanced Configuration then expand Events and Output Right click Hardware Input Events and select Enable New Input Event 2 Inthe Hardware Input Event Properties window s list of hardware devices expand the required hardware device to see a list of pre defined hardware input 3 Select the required types of input to use them as events The types of input often vary from camera to camera If motion detection is enabled in the NVR for the camera in question note the input type System Motion Detection which lets you turn detected motion in the camera s video stream into an event Note that some types of input are m
477. zard Express Method The Express option scans your network for relevant hardware devices and helps you quickly add them to your system With the Express option the wizard only scans for hardware devices supporting device discovery and only on the part of your network subnet where the RC C server itself is located What is device discovery Device discovery is a method with which hardware devices make information about themselves available on the network Based on such information the NVR can quickly recognize relevant hardware devices such as cameras and video encoders and include them in the scan To use the Express method the RC C server and your cameras must be on the same layer 2 network that is a network where all servers cameras etc can communicate without the need for a router The reason for this is that device discovery relies on direct communication between the RC C server and the cameras If you know that routers are used on your network use the advanced or manual method instead If you are asked for Device License Keys DLKs when starting the wizard see Import DLKs Device License Keys When using the Express option the wizard is divided into a number of pages e Hardware Detection and Verification e Missing DLKs if Applicable e Overview and Names Add Hardware Devices Wizard Advanced Method The Advanced option scans your network for relevant hardware devices based on your specifications reg

RC-C User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents