Foam Maxx - Ver
Contents
1. AAD 625 Remove washer Item No PSGORV in spray gun Washer may be reused if in good condition Remove white wadding from spray gun and dispose of wadding Item No WAAD 5 Insert new wadding Item No WAAD 5 and washer Item No PSGORV in spray gun Insert new wadding in poly wand Item No WAAD 625 gt ae 04112012 USER MANUAL 2 GALLON PUMP UP FOAM UNIT WITH SINGLE LINE TUBING PARTS LIST HBSS1238 TUL PSG12 l ITEM NUMBER HBSS1238 PSG12 PUF2 N 2 PUFPA 2 PUF PRV 2 PUF PST2 PUWAND SL48 SSC38 WAAD 5 PUF PST2 DESCRIPTION STAINLESS HOSE BARB 1 2mpt X 3 8 barb POLY SPRAY GUN 1 2 INCH MPT WITH VITON O RING PSGORV 2 GALLON PUMP UP FOAMER TANK WITH PRESSURE RELIEF VALVE PUMP ASSEMBLY FOR PUMP UP PRESSURE RELIEF VALVE SUPPLY TUBE FOR R L PUMP UP FOAMER 15in PUMP UP FOAMER WAND 48 INCH SINGLE LINE PUMP UP HOSE WITH TANK NUT WORM GEAR CLAMP S S 25 63 WAADING FOR PUMP UP FOAMER 1 2 in DIA WAAD 625 WAADING FOR PUMP UP FOAMER 625 in DIA USER MANUAL MODEL FI 2 SL Page 3 of 3 041120122. READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT User Manual for Models FI 2 SL 2 Gallon Pump Up Foam Unit with Single Line Tubing Foam Maxx READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT 04112012 USER MANUAL 2 GALLON PUMP UP FOAM UNIT WITH SINGLE LINE TUBING READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT WARNING 0O OQ e PEOPLE OR OBJECTS CAN BE HURT OR DAMAGED IF THIS FOAMER IS NOT CORRECTLY USED e Always wear protective clothing gloves and eye wear while servicing the unit Protect eyes skin and lungs against drifting spray e Read chemical s MSDS sheet before using this unit e Depressurize and clean unit after each use Release any remaining air pressure by twisting the pressure relief valve to the right turn e Never leave unit unattended while pressurized e DONOT use solutions above 100 F 37 77 C e Never carry tank by the hose wand or unlocked pump handle e Maintenance Instructions Should pumping become difficult raise pump and apply 5 10 drops of any food safe lubricant between pump and pump sleeve e NOTICE Buyer assumes all responsibility for safety and proper use in accordance with the instructions SPECIFICATIONS Discharge Gun Vibration level Maximum 2 5 m s Liquid Temperature c0cceee es 100 F 37 77 C Noise LeVel ccceccssseceeeeeeeseceeees Maximum 70 dB DIMENSIONS PRONE ae N 19 in 500 mm approximately Diamete
3. r sscerseriiosrrn a 6 in 150 mm approximately Weight 4 4 Ibs 2 kg empty 22 Ibs 10 kg full approximately ACCEPTABLE PRODUCTS Alkaline Cleaners Caustic Clean ers Sanitizers Chlorine and Acids DO NOT USE All hydrocarbons or D Limonene INSTRUCTIONS 1 Release any remaining air pressure by twisting the pressure relief valve to the right turn 2 Unscrew the cap assembly from the tank 3 Mix foaming chemical solution following the manufacturer s directions 4 Fill tank with solution up to the first band or 1 gal 3 78 of solution 5 Replace cap assembly and tighten securely 6 Turn pressure relief valve to the right and tighten to seal 7 Pressurize tank by pumping approximately 15 20 times depending on amount of solution 8 Grasp trigger gun aim in safe direction and squeeze trigger to spray foam 9 Must remove all pressure from unit before emptying or refilling NOTE 1 Operator should periodically lubricate the seals of the pump with food safe lubricants such as petroleum jelly grease vegetable oil NEVER USE LUBRICANTS SUCH AS WD40 2 After each use run clean water through the unit and rinse all parts thoroughly with clean water HOW TO CHANGE WADDING IN SPRAY GUN AND WAND Unthread poly wand from spray gun oe re E D Attach poly wand onto spray gun Ok dik USER MANUAL MODEL Fl 2 SL Page 2 of 3 Remove white wadding in poly wand and dispose of wadding Item No W
Download Pdf Manuals
Related Search