Home

User`s Manual - Edge-Core

Contents

1. GO fi Page W First 4 Previous Next End gt Figure 3 165 Current User List super account CURRNET USER NO Type IP Address MAC Address 1 MNon_Auth 192 168 100 192 00 0C 6E 56 56 6E GO fi Page M4 First 4 Previous Next End MM Figure 3 166 Current User List No Authentication Click on refresh button to update the current user list page Type Username IP Address MAC Address Click the column button to sort the column in ascending descending order Disconnect Select the check boxes and click Disconnect to disconnect accounts Disconnect All Disconnect all accounts in current user list 160 SMCWHSG14 G 3 3 5 DHCP Clients The DHCP client table shows the current DHCP users on the LAN DHCP CLIENTS DHCP Client s Information including assigned IP address and MAC address No MAC Address IP Address 1 00 20 2D 4B8 86 DE 192 168 2 2 192 168 2 3 2 00 C0 C4 19 7D 58 Figure 3 167 Current User Screen 3 3 6 Session List The remote site administrator could monitor the real time usage status of Wireless Subscriber Gateway via this page SESSION LIST List of sessions of Network events Incoming and outgoing packet information including source IP address destination IP address and port number b GO E Page M4 First 4 Previous Next End gt No TCP UDP Client IP Client Port Port Fake Remote IP Remote Port Idle 1 TCP 192 168 100 192 4672 50013 207 46 106 94 1863 25 2 TCP 192
2. 1 RS 232 Reserve for manufacture use 2 LAN 1 4 The rear panel supports four auto sensing RJ 45 ports and all ports can be auto switched to MDI l connections The LAN ports used for linking hosts or other network devices The individual port can be either connected to 100BaseTX networks or 10BaseT networks When connecting to a 100BaseTX network the ports operate at 100Mbps in half duplex mode or 200Mbps in full duplex mode When connecting to a 10BaseT network the ports operate at 10Mbps in half duplex mode or 20Mbps in full duplex mode 3 WAN One Ethernet port used for linking xDSL or Cable Modem 4 Reset Button The Wireless Subscriber Gateway has a reset button at the rear panel of the device Use this function to reset the system back to factory defaults 5 Power Jack Used to connect the external power supply with the Wireless Subscriber Gateway 1 5 Technical Specifications 1 5 1 Hardware Specifications Network Specification IEE802 3 10BaseT Ethernet IEE802 3u 100BaseTX Fast Ethernet IEE802 11g Wireless LAN IEEE802 3af Power over Ethernet ANSI IEEE 802 3 NWay auto negotiation Wi Fi Compatible Connectors One Printer Port 1 DB9 DTE male connector for Account Generator Printer Four LAN Ports 10BaseT 100BaseT X Auto cross over One WAN Port 10BaseT 100BaseTX Auto cross over Encryption WEP Wired Equivalent Privacy 64 128 bit RC4 WPA Wi Fi Protected Access External Antenna Type 2dBi Max Dual de
3. Delete to delete the filtering address s onl EL Click Add to List button to add a new entry Seely Click Apply button to save the new settings Delete All Click Delete All amp Apply button to delete all entries Note The priority of pass through is higher than Filtering 128 SMCWHSG14 G 3 2 13 Share This feature allows sharing the network devices after subscriber successful login SHARE Share LAN resource Disable This feature allows to share the network resource after subscriber successful login Please enter new sharing LAN resource up to 50 entries Resource Hame Resource IP Address Resource MAC Address Interface Add to List Share Resource List No Active Resource Mame IF Address MAC address Interface Delete Delete All Figure 3 136 Share Device Setting Screen SMCWHSG14 G itm Default Description Share LAN resource Enables or disables share LAN resource function Resource Name Empty Enter the device name The maximum character of the resource name is 30 Resource IP Address Empty Enter the IP address of device in the format XXX XXX XXX XXX Resource MAC Address Empty Enter the MAC address of device For input the device MAC address please use this format such like 0050BA8D229 6 Interface Select the interface Share LAN resource List No The index number of share LAN device Active Click on check box active or inactive the share LAN
4. SIN 001234 Pay the money to Hotspot internet Service Username adx12dwe Hotspot Operator gt TA Tortie Total 35 7 2003 10 25 11 10 40 Subscriber Hotspot Operator Thank you very much Figure 3 52 Post paid Procedure Diagram En Click Apply button to save the new settings The Configuration has been changed Click Apply button the success dialog box appears Click on Back to return to Billing setting screen Figure 3 53 Success Dialog Box SMCWHSG14 G 69 3 2 7 Accounting This function allow service provider to generate the subscriber accounts ACCOUNTING ee Un used account will be deleted after 12 hours automatically 1 30 xplration Accumulation account will be deleted after logged in E months 1 30 Printout Number of copies to print 1 Replenish D Can be replenished by subscriber Three Button Printer Web based Account Generator Panel Button 4 01130 minutes 30 minutes 1 00 Button B 02 1 hour 1 hours 2 00 x Button 031 2 hours 2 hours 3 00 Print to Account Generator Printer a PC Connected Printer A Use Button A for Discount Price Plan based on Button Presses Disable only walid for Three Button Printer Discount Price Plan based on Button Presses Y Charge by levels Level Conditions Button Presses Unit Price 1 when gt 1 same as base charge 2 when gt po 3 when gt bP 4 when gt po 5 when gt po ES E
5. Billing profile information Type TimeToFinish Accumulation PostPaid Billing profile information index name Account usage time 00 59 59 example A log would be sent if account were activated Format Id Mac Address Account Activate username user IP user MAC Interface A log including subscriber s login or logout time will be sent once after subscriber logout Format Id MAC Address Subscriber Trace Type Event S N Username User IP User MAC Interface Login time Logout time Usage Time Time Left RxData count TxData count Type TimeToFinish Accumulation PostPaid Super Event Finished Replenished Logout Idle Timeout Account Expired Deleted If the type of Subscriber Trace is Super the Username will be eee and S N will be Usage time 00 59 59 example SMCWHSG14 G Subscriber Trace Relationship TimeToFinish 00 00 00 TimeToFinish Replenished 00 12 00 to S Nxxxxxx tem intervalTime Billing Log A log would be sent after a billing log is created Format Id MAC Address Billing Log Type S N Username Billing profile information Units Usage time Bill Payment Type TimeToFinish Accumulation PostPaid Billing profile name Name Usage time 00 59 59 example Billing profile information index name Payment Cash Credit Card Credit Card does not support PostPaid If Type is PostPaid the billing profile infor
6. Disable WPA Group Key Rekeying per 86400 seconds Use WPA with Pre shared Key Pre shared Key 8 63 characters O Use WPA with RADIUS Server Server IP Authentication Port 1812 Shared Secret Key C WEP Use Static WEP Encryption 64 bit 128 bit Mode HEX WEP Key 14 000 C 2 anna S c 3 ano S c 4 pooo S Note You have to restart the system to apply the WEP settings Do not change any setting below unless you make sure you understand all the meaning of setting You can press DEFAULT to restore the wireless factory default setting once you made setting changed to cause wireless not work Beacon 100 KERES heh OR En Interval msec range 20 999 default 100 2347 range 1 2347 default 2347 RTS Threshold Fragmentation Threshold 2432 range 256 2432 default 2432 even number only Preamble Type Authentication Method Short Preamble Long Preamble Dynamic Preamble Open System Shared Key Both 150 Figure 3 155 Wireless Setting Screen SMCWHSG14 G item Default Description General Settings The ESSID is the unique name that is shared among all ESSID Wireless points in a wireless network lt is case sensitive and must not exceed 32 characters Channel e Selectthechamnelll for wireless connection Select disable to allow wireless station to communicate with Security Disable the device without
7. Dynamic Domain Name Service an IP Registry provides a public central database where information such as email addresses host names IP addresses etc can be stored and retrieved This solves the problems if your DNS server uses an IP associated with dynamic IP addresses When the ISP assigns the Wireless Subscriber Gateway a new IP the Wireless Subscriber Gateway must inform the DDNS server the change of this IP so that the server can update its IP to DNS entry Once the IP to DNS table in the DDNS server is updated the DNS name for your web server i e xyz dyndns org is still usable DDNS Force to update every day s when WAN IP address keeps no change No Active Settings Update Status Now Status N A Service Provider Registered Host Name a a e He Login Name Password Email Address O Wildcards coptional Status N A Service Provider Registered Host Name a2 O Login Name Password Email Address O Wildcards optional Status N A Service Provider Registered Host Name 03 O Login Name Password Email Address O Wildcards optional dyndns org www dyndns org for example xyz dyndns org max 23 characters max 23 characters optional dyndns org www dyndns org Z for example xyz dyndns org max 23 characters max 23 characters optional dyndns org www dyndns org bal for example xyz dyndns org max 23 characters m
8. My Subnet Mask Empty address My IP Address SMCWHSG14 G 27 tem Defaut Description Enter the PPTP server Gateway IP address provided by your ISP PPTP Server IP Address Empty Enter the PPTP server IP address provided by your ISP Enter the user name provided by your ISP The user name Username Empty can consist of up to 80 alphanumeric characters and is case sensitive Password Empty Enter the user password provided by your ISP The password can consist of up to 80 alphanumeric characters and is case sensitive MTU Maximum Transfer Unit specifies maximum PPP MTU Setting 1460 E transmission unit size MSS Maximum Segment Size specifies maximum segment TCP MSS Setting 1400 l size Enter the connection ID or connection name The connection Connection ID Name Empty ID Name can consist of up to 81 alphanumeric characters and is case sensitive Connect on Demand and Max Idle Time Gateway IP Address Empty Connect on Demand Enable You can configure your Wireless Subscriber Gateway to cut your connection with your ISP after a specified period of time Max Idle Time If you have been disconnected due to inactivity Connect on Demand enables your Wireless Subscriber Gateway to automatically re establish your Max Idle Time 10 Minutes connection as soon as you attempt to access the Internet again If you wish to activate Connect on Demand click the radio button If you want your Internet connection to remain
9. The System Information Menu displays current system basic information including the service connection message host name LAN WAN DHCP Configuration DNS E mail Redirection SSL Certificate network traffic Information and the system firmware version number SYSTEM Display the detailed system information Internet Connection Service Wireless Service System Name Domain Name Firmware Version Wireless Version System Bootrom Version WAN MAC Address LAN MAC Address System Time System Up Time IP Address LAN IP Subnet Mask WAN Port Mode IP Address WAN IP Subnet Mask Gateway IP address Primary DNS Server DNS secondary DNS Server DHCP Status Start IP Address DHCP End IP Address Lease Time ESSID Wireless Channel Secure Mode E Mail 192 168 100 3 OK OK 1 02 08 1 2 8 1 02 00 90 0E 00 96 CC 00 90 0E 00 96 CB 2005 4 28 16 48 50 00D 00H 22M 245 192 168 2 1 255 255 255 0 Static IP 192 168 100 191 255 255 255 0 192 168 100 254 168 95 1 1 Server 192 168 2 2 192 168 2 254 300 Wireless 6 Disable Figure 3 160 System Status Screen 156 SMCWHSG14 G Tx Data 470774 WAN Traffic Rx Data 2471580 Tx Error 0 Rx Error 0 Tx Data 4334455 Network Traffic LAN Traffic Rx Data 856411 Tx Error 0 Rx Error 0 Tx Data 2 Rx Data 0 Tx Error 0 Rx Error 0 Zip Wireless Traffic CO e ae Figure 3 161 System Status Screen Local City SMCWHSG14 G 157 3 3 2
10. 168 100 192 4717 50046 207 46 106 47 1863 126 M4 First 4 Previous Next gt End GO 1 y Page Figure 3 168 Session List Screen SMCWHSG14 G 161 3 3 7 LAN Devices You can manage all devices by clicking on device name to access device s Web based interface anA ar m ma 4 LAN DEVICE We detect below listed devices to check if alive every 5 min You can manage below listed devices by clicking device name to access its Web based UI Device Virtual Port D IP D MAC l NO Device Name status 6900 5910 yi Server pi Application Interface Address Address 60001 60050 Port Ethernet et ETA a 400 47M 4199 on an ANDE 97 A Mirar 1 Switch OK 60001 192 168 100 123 ol 00 90 0E 00 25 3 TCP Aired Click Username Password Enter Clear c 2000 2000 AN Rights Reserved Figure 3 170 Example Ethernet Switch Management Screen 3 4 System Tools This allows service provider or administrator to process Firmware upgrade change password and backup or restore configuration 1 Configuration gt CONFIGURATION 2 Firmware lo FIRMWARE 3 Boot Code gt BOOT CODE 4 System Account i SYSTEM ACCOUNT 5 SSL Certificate 6 Ping Command i SSL CERTIFICATE 7 Restart gt PING COMMAND 8 Logout gt RESTART e LOGOUT Figure 3 171 System Tools Item 162 SMCWHSG14 G 3 4 1 Configuration Use the Configuration item to save restore or reset configuration parameters of the Wireless Subscriber Gateway CONFIGURATI
11. Account List You can display a list of all the account information on this device This table includes the username password usage time time created login time expiration time and status ACCOUNT LIST List existing account s information SiN Status Username Usage Time Time Created Login Time Expiration Time Delete re 2005 2114 2005 2115 000001 Un used ha92hk46 0 30 00 13 44 46 01 44 46 O AA 2005 2 14 2005 2 15 000002 Un used ubynp552 1 00 00 13 44 51 01 44 51 C PN 2005 2 14 2005 2115 000003 Un used gpgxghH4 2 00 00 13 44 54 01 44 54 C A 2005 2 14 2005 2 15 000004 Un used 30b6qm57 2 00 00 13 44 57 01 44 57 C en 2005 2 14 2005 2 14 2005 2 14 000005 In used yfp23n33 2 00 00 13 45 03 13 45 40 15 45 40 O Delete Delete All GO E Page W First 4 Previous Next End gt Figure 3 162 Account List Click on refresh button to update the account list page Sih Status Usemarne Usage Time Time Created Login Tine Expiration Time Click the column button to sort the column in ascending descending order Delete Select the check boxes and click Delete to delete the accounts Delete all accounts in account list Note This page will refresh automatically every 5 minutes 158 SMCWHSG14 G 3 3 3 Account Log The account log shows the accounts log information ACCOUNT LOG List accounts log 000001 had hkdb OOOO ubynp55z ODODOS gpaxghd DODOnA 30bbqm5 000005 yfp23
12. Accounting Logout Window Timer Control SMCWHSG14 G Security and Firewall Layer 2 Isolation Security e SSL User Login page Configuration Page e S SLAdministration e VPN Pass through IPSec PPTP e Customize SSL Certificate e Pass Through IP MAC URL Address Restricted Destination Filtering IP URL e VPN IPSec PPTP Pass through e PPTP VPN Client e WEP e WPA Management e Web based Management Tool e Firmware Upgrade via HT TP TFTP e Wizard setup for step by step Configuration Backup Restore Factory Default Setting Remote Authorized Management Real time Session List e LAN Device Management Syslog System Subscriber LAN device e E mail logs e SNMP v1 v2 MIB II Private MIB e System Information Table e Status Report Daily Monthly System Network e SSL certificate upload Extra Function with optional AG 200E Local Authentication Local Accounting Local Billing AG 200E Account Generator Thermal Printer Interface Ethernet Print Width 48mm Paper width 58mm Paper Length 50 M SMCWHSG14 G 15 2 Installation The followings are instructions for setting up the Wireless Subscriber Gateway Refer to the illustration and follow the simple steps below to quickly install your Wireless Subscriber Gateway 2 1 Wall Mounting The Wireless Subscriber Gateway can be wall mounted on a wall by applying the two mounting brackets on screws Mounting Bracket i 4 O
13. Configuration has been changed Figure 3 70 Success Dialog Box SMCWHSG14 G 3 2 8 Credit Card Wireless Subscriber Gateway provides three credit card services Authorize net iValidate net Secure Pay and Paypal that allow service provider to authorize process and manage credit transactions directly from Internet CREDIT CARD Authorize net Version 31 Merchant ID Merchant Password CI Need Password Merchant Transaction Key Payment Gateway https secure authorize net gateway transact dll C Merchant Name C Email Additional Information CI Username and Password C Usage Time O Validate net Merchant ID Terminal ID Secure Server Address https www vious net merchant processcc asp Secure Pay Merchant ID SecurePay Address https www_securepay com au securepay payments proc PayPal Business Currency Code U S Dollar v Identity Token Payment Gateway https www paypal com cgi bin webscr Credit Card icons to be displayed on the login page O OE O sera O O asia O Bankcard voma Figure 3 71 Credit Card Setting Screen ltem Defaut Description Authorize net This field displays the merchant version Merchant ID Enter your Merchant ID This is a Merchant Identification Number that you re received from your Merchant Provider The maximum character of the Merchant ID is 50 Merchant Password This is a Merchant password that you re received from your Merchant Provider SMCWH
14. Dh Pass Through NO Filtering Share Portal Page E E cx a h O Advertisement Walled Garden DDNS LAN Devices Syslog N a a 2 O O uo N QO Session Trace Bandwidth Secure Remote SNMP Wireless N N N N a OO N gt N al Account Generator e SYSTEM gt WAH LAN P SERVER e AUTHENTICATION e RADIUS e BILLING P ACCOUNTING P CREDIT CARD e KEYPAD e CUSTOMIZATION P Pass THROUGH FILTERING gt SHARE e PORTAL PAGE P ADVERTISEMENT WALLED GARDEN b DDNS P LAN DEVICES P SYSLOG P SESSION TRACE P BANDWIDTH P SECURE REMOTE SNMP P WIRELESS ACCOUNT GENERATOR Figure 3 29 Advanced Setting Item Screen Note After change the settings of device please click apply button to save the new settings SMCWHSG14 G 45 3 2 1 System Define the Wireless Subscriber Gateway System configuration SYSTEM System Host Name Domain Name Location Name Po Max 50 Address oT Max 200 City UE Max 50 Stato Province aa Max 50 Zip Postal Code A OE Max 10 Country O T Max 50 Contact Name TEA Max 50 Contact Telephone oT Max 50 Contact FAX Po Max 50 l Contact Email EA Max 50 Date 2005 i 2 y f 1 Weven onth D ay Time mE 24 7 13 nou Minute Second Get from my Computer Get from NTP server O NTP Setting R Server IP Domain Date Time Name Time Zone GMT 1
15. L Enter Email Address Max 80 characters submit Button Max 40 characters Submit Transaction and Login Additional Customer Data Merchants may provide additional customer information with a transaction based on their respective requirements I First Last Name Last Name Max 20 characters First Name Max 20 characters M Billing Address ZIP code Max 40 characters Billing Address ZIP code a Preview of Service Selection Page 116 Figure 3 121 Service Selection Page Setting Screen iValidate net SMCWHSG14 G Service Selection Page SMCWHSG14 G Service Selection Message Purchase Unit Message Notification Message 1 Notification Message 2 Notification Message 3 Enter Payment Information Enter Credit Card Mumber Enter Credit Card expiration date C Card Verification alue Enter Email Address Subrnit Button Figure 3 122 Service Selection Page Setting Screen Secure Pay Customize the message for the service selection page Please choose from the following service selection hias 30 characters How many units of Internet access would you like to ax 30 characters Please kindly note that there will be no refund once ihlas 160 characters Please note that the time block of selected service ax 160 characters m thiax 160 characters Enter Payment Information fall info is required i
16. Port 161 161 or 16100 16199 y Trap Port 162 162 or 16200 16299 y Mo Community Mame NMS Address Privileges status paie A Read ae rato A Me B 3 O aw FB vena 4 An Read i nun anv Read i vena Figure 3 154 SNMP Setting Screen tem Deta Description SNMP Disables or enables the SNMP management If the SNMP enables also allowed to specific the SNMP port number via NAT The allowed SNMP port numbers are 161 default 16100 16199 and Trap port numbers are 162 default 16200 16299 This Port setting is useful for remote control via NAT network Configuration Community Name public private Every unit with SNMP enable must be configured to recognize one or more community names up to 20 characters The default setting for the community of entry 1 is public and for the entry 2 is private and others are empty NMS Address ANY The address of the NMS The default settings for the NMS Networking are ANY 148 SMCWHSG14 G tem Defaut Description Privileges Read Write Choose Read Write Trap Recipients and All for different privileges The default setting of the entry 2 is write and others are read Status Valid Invalid Chosen Valid or Invalid The default setting of entry 1 2 are valid and others are invalid SMCWHSG14 G 149 3 2 24 Wireless WIRELESS General Settings ESSID Wireless Channel 0 Security
17. Success Dialog Box Welcome Hotspot Internet Service Username 0000000 Password WOOO Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 ESsID Wireless aM OO0001 200411129 14 32 50 Please activate your account before 0044 130 023258 Thank you very much Figure 3 114 PC connected Printer Printout SMCWHSG14 G 111 Welcomel Username o00000 Passwordi0000000 Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 2004 11 29 14 35 27 S N 000001 Please activate your account before 2004 11 30 02 35 27 Thank you very much Figure 3 115 Account Generator Printer Printout Example Preview 1 Create accounts 2 Bill accounts Welcome Welcome Username ooo00n Username 000000 Password 0000000 Password 0000000 Usage Time ESSID Wireless Billing Time to Finish Total 100 00 2002 4114 03 14 31 Please start your account before 2002 4114 15 14 31 Thank you very much Thank you very much Press ENTER Press 001234 and ENTER Figure 3 116 Account Generator Printer Printout 112 SMCWHSG14 G e Credit Card Standard Login Page This function allow service provider to customize the additional credit card message for the standard login page standard Customize the additional credit card message for the standard login page Login Page Click here to pay by credit card Credit Card Message ad Max 60
18. Use for Pre Paid Billing Keypad Hot Key Billing Profile 01 30 minutes 30 minute s 1 00 dh Unit Price Based on minutes y M Charge by levels Level Conditions Time Range Figure 3 78 Keypad Setting Screen SMCWHSG14 G 91 item Defauit Description Use for Pre Paid Billing The system provides ten user definable hot keys through the use of the Key plus the 1 through O keys across the top of the keypad Billing Profile Select the billing profile you want to assign to the combination hot key Level 1 10 Time Range o FEmtertiemumber o Enter the amount of charge level Please follow steps below to create accounts using keypad function Use for Pre Paid Billing Unit Price Step 1 Click the Billing in the Advanced Setup menu select enable Pre Paid click Apply BILLING Pre Paid sutstmbers can access Internet with pre defined usage time T Enable Credit Card Service Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop to access the Internet before run out Accumulation The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out O Post Paid
19. WAGW 211 22 33 44 PDNS 168 95 1 1 SDNS DHCP DHCP Server DHSP 10 59 1 2 DHEP 10 59 1 254 DHLT 1440 EMAIL 211 22 33 66 PORT25 SSID Wireless WCHA 6 WWEP Mandatory Figure 3 89 System Status Report Printout SMCWHSG14 G 97 O Network Report Printout Abbreviation Current Settings Network WAST WAN Status WAST Not Established WSTA Wireless Service WSTA Fail SYST System Up Time SYST O1D2OH3S5Mi46s WATD WAN Tx Data WATD 12234567890 WARD WAN Rx Data WARD 1234507590 WATE WAN Tx Error WATE 1234567890 WARE WAN Ex Error WARE 1234567890 LATOD LAN Tx Data LATD 1234567890 LARD LAN Ex Data LARD 1234567890 LATE LAWN Tz Error LATE 1234567890 LARE LAN Ex Error LARE 1234567590 WLTD Wireless Tx Data WLTD 134567590 WLED Wireless Rx Data WLED 1234567890 WLTE Wireless Tz Error WLTE 1234567390 WLRE Wireless Ex Error WLRE 1234567890 2O0208 28 14 39 00 Figure 3 90 Network Report Printout 98 SMCWHSG14 G 3 2 10 Customization e Login Page The Wireless Subscriber Gateway provides three different login page formats including standard redirect advanced and frame format Standard For some service providers they may hope to have a customize subscriber s login page to the users This function helps them to realize the ideal The page elements are including login page title background color subtitle etc CUSTOMIZATION E Information User Agreement Login Page Logo Window Account Printout Credit Card Page Pleas
20. can specify 5 Secure administrator IP Any IP addresses or a range to allow remote control access Addresses from network This function allows for multiple transmissions to Multicast Pass Through Disable a o specific recipients at same time This function allows remote user to ping the Wireless Allow remote user to ping the Subscriber Gateway through Internet Ping is normally Enable device used to test the physical connection between two devices to ensure that everything is working correctly 48 SMCWHSG14 G tem Default Description Option default or customize certificate These are two ways to create a certificate one is purchase a SSL Certificate certificate from a certificate authority Ex Verisign or Thawte and another is creating a self certificate For example Uses OpenSSL tool Apply Click Apply button to save the new settings Click Apply button then Restart dialog box will appear Click Apply to restart the system RESTART Do you want to restart the system Figure 3 32 Restart Dialog Box 3 2 2 WAN LAN WAN LAN LAN IP Address 192 168 2 1 Subnet Mask 255 255 255 0 Default orange to PO ics DHCP Client C hdosthy for Cable modem users or Local Area Network J WAN MAC Address O Static IP Mostly for advanced Local Area Network environment WAN Port Mode O PPPoE C Mostly for ADSL modem users 1 O PPTP Mosthy for Europe ADSL modem users 4 Figure
21. characters First Name Last Name Max 20 characters Max 20 characters Company hax 40 characters au SSO a i Customer Information Max 40 characters State Province Max 40 characters ZIP Postal Code Max 40 characters Country Max 40 characters Phone Max 40 characters Fax Max 40 characters SMCWHSG14 G Q Preview of Service Selection Page Figure 3 120 Service Selection Page Setting Screen Authorize net 115 Service Selection Page Customize the message for the service selection page service Selection Message Please choose from the following service selection Max 30 characters Purchase Unit Message How many units of Internet access would you like to Max 80 characters Notification Message 1 Please kindly note that there will be no refund once Max 160 characters Notification Message 2 Please note that the time block of selected service Max 160 characters Notification Message 3 m Max 160 characters Enter Payment Information Enter Payment Information all info is required Max 160 characters Enter Credit Card Number Credit card number Max 80 characters Enter Credit Card expiration date Credit card expiration date Max 80 characters Card Verification Value Credit Card Code Max 40 characters Enter Email Address
22. expiration date The allowed format is MMYY Enter Email Address Empty Enter your email address The system will e mail you account information once your payment information has been successfully authorized First Name Last Name Empty Enter the customer information including name city country and country 88 SMCWHSG14 G Welcome Hot Spot Internet Service Please choose from the following service selection Service Code Service Name Usage Time Charge fe 30 minutes 30 minutes 1 00 Cc z 1 hour 1 hours 2 00 O 3 2 hours 2 hours 3 00 How many units of Internet access would you like to purchase E Please kindly note that there will be no refund once connectivity is confirmed Please note that the time block of selected service is based on continuous Usage Enter Payment Information all info is required call into is required Credit card number Credit card expiration date iMi Enter Email Address Billing Address ZIP code Submit Transaction and Login Figure 3 75 Service amp Payment Information Setting Screen iValidate net tem Defaut Description Payment Information Credit card number Empty Enter your credit card number Credit card expiration date Empty Enter the credit card expiration date The allowed format is MMYY Enter Email Address Enter your email address The system will e mail your account information once your payment information has been successfully authori
23. ltem Defaut Description My IP Address Empty A PPTP local IP address for the xDSL Cable connection provided by your ISP My Subnet Mask Empty Enter the PPTP local IP address for the xDSL Cable connection connection provided by your ISP connection provided by your ISP Username Empty Enter your PPTP account name The user name can consist of up to 80 alphanumeric characters and is case sensitive 5A SMCWHSG14 G SMCWHSG14 G ltem Defauit Description Enter your PPTP password The password can consist of up to 80 alphanumeric characters and is case sensitive a a Maximum Transfer Unit specifies maximum transmission unit size en eee Maximum Segment Size specifies maximum segment size Connection ID Name Empty Enter the connection ID or connection name The connection ID Name can consist of up to 81 alphanumeric characters and is case sensitive Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your Wireless Subscriber Gateway to Max Idle Time 10 Minutes cut your connection with your ISP after a specified period of time Max Idle Time If you have been disconnected due to inactivity Connect on Demand enables your Wireless Subscriber Gateway to automatically re establish your connection as soon as you attempt to access the Internet again If you wish to activate Connect on Demand click the radio button If you want your Internet connection to remain click the radio b
24. signal make sure that the length of any twisted pair connection does not exceed 100 meters SMCWHSG14 G 173 Appendix B Regulations EMI Compliance FCC Regulatory Statement Part 15 Class B compliant device This device complies with Part 15 of the FCC Rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including that which may cause undesired operation This equipment has been test and found to comply with the limits for a computing device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 The equipment and the receiver should be connected the outlets o
25. t Administrator Idle Timeout 5 Minutes l l _ l send packet in 5 minutes the administrator will logout automatically 56 SMCWHSG14 G tem Default Description There are three types of DHCP Services DHCP Disable Disable the DHCP server function DHCP Server Enable DHCP Relay Enable DHCP Relay function DHCP Server Enable DHCP server function To route DHCP through an external server the administrator needs to DHCP Relay l l enable the DHCP relay and assign a valid DHCP server IP address DHCP Server IP Address Empty Enter the IP address of DHCP server The Wireless Subscriber Gateway s DHCP server is turned on and DHCP Server running by default when you install it in your network DHCP Pool Starting 192 168 2 2 Enter the DHCP Pool Starting IP address Address 253 The DHCP The DHCP pool size range is 1 to 512 size range is 1 to 512 The DHCP lease time The DHCP lease time range is 1 to Lease Time Minutes 71582788 minutes Primary DNS Server 168 95 1 1 Enter the IP address of the network s primary DNS server Secondary DNS Server Empty Enter the IP address of a second DNS server on the network Email Server Redirect To prevent some subscriber s original Email server may protect by firewall or NAT network Wireless Subscriber Gateway provides an extra Email server parameter to forward the subscriber s Email The Wireless Subscriber Gateway not only forwards the subscribers E mail via other E mail se
26. to access the Internet before run out Accumulation The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out Server IP address Primary RADIUS Authentication Port Beier Accounting Port Shared Secret Key Server IP address Authentication Port Secondary RADIUS Server Accounting Port Shared Secret Key Retry times when Primary fail 1 7 Retry Frequency E seconds 3 75 Disable Enable Interim Update Time ls Min s CHAP Accounting Service Authentication Method WISPr Smart Client FT Enable Directly Reply Proxy Reply with Redirect Login Page URL Proxy Reply with Specific URL Login Mode Figure 3 45 Authentication Setting Screen SMCWHSG14 G 61 tem Default Deseription RADIUS Authentication Disable Option No Authentication or RADIUS Server Disable No Authentication Subscriber can direct access the Internet without enter username and password Enable RADIUS Authentication Wireless Subscriber Gateway provides RADIUS Authentication for service provider to build up an Internet service with RADIUS server If RADIUS Authentication is enabled all subscribers authentication will send to RADIUS Server by RADIUS protoco
27. 0 0 Default Gateway None DNS Wireless i l 3 Wireless Service OK ESSID SMC Wireless Channel 6 Secure Mode Disable Traffic WAN TxData 10 RxData 0 TxError 0 RxError 0 SMCWHSG14 G Copyright c 2007 SMC Networks Inc All Rights Reserved Figure 3 186 System Status Screen 170 SMCWHSG14 G e Super Subscriber Account Start your Web Browser a subscriber login page will appear Enter super as the Username and super as the password and click Enter you can use Internet now SMCWHSG14 G T sername super Username super Password super a E _ _ _ _ Password Version 1 00 01a Figure 3 187 Subscriber Login Page 3 4 5 SSL Certificate The function allows you to download the registered CA certificate into the Wireless Subscriber Gateway SSL CERTIFICATE This feature allows you to download the registered CA certificate into this device Password for Private Key Certificate File Browse Private Key File Browse Figure 3 188 SSL Certificate Download Setting Screen Note The password field must the same as the CA s registered password SMCWHSG14 G 171 3 4 6 Pin Command The Ping function can check the Wireless Subscriber Gateway networking connective or not PING This feature allows you to execute ping command Pinging wr hinet net 61 219 358 89 with 32 bytes of data Reply from 61 219 38 89 bytes 32 time 90ms TIL 246 Reply from
28. 0001 bvnbc332 000002 293qt32 000003 b4e55f56 B Billing Profile o per i UN Purchase Unit TOTAL ACCOUNTS 5 TOTAL PRICE 6 00 2003 11 26 10 36 03 End Figure 3 87 Daily Account 96 SMCWHSG14 G e Monthly Account Report Printout Monthly Account Username B 000001 bvnbc332 000002 i293qt32 000003 b4e55f56 000004 n5faixz26 000005 t877ji46 TOTAL ACCOUNTS 5 TOTAL PRICE 6 00 2003 11 26 10 36 03 End 1 1 1 00 1 1 1 00 2 1 2 00 1 1 1 00 1 1 1 00 B Billing Profile UN Purchase Unit Figure 3 88 Monthly Account o System Status Report Printout Abbreviation System Status WAST WAN Status WSTA Wireless Service SYST System Up Time HOST Host Name FRMW Firmware Version WFRM Wireless Firmware Version BTRM BootROM Version LOCA Location Name WAMA WAN MAC Address LAMA LAN MAC Address WATP WAN Type WAIP WAN IP Address WASM WAN Subnet Mask WAGW WAN Gateway PDNS Primary DNS SDNS Secondary DNS DHCP DHCP Service DHSP DHCP Start IP DHEP DHCP End IP DHLT DHCP Leased Time EMAIL Redirect Email Server SSID Wireless ESSID WCHA Wireless Channel WWEP Wireless WEP Printout Date and Time Current Settings System Status WAST Not Established WSTA Fail SYST O01D 20H 35M 46S HOST Wireless FRMW 2 00 00 Press ABCCC WFRM 1 00a BTRM 1 01 LOCA TAIPEI WAMA 00 11 22 33 44 55 LAMA 00 11 22 33 44 56 WATP PPPoE WAIP 211 11 22 33 WASM 255 255 255 214
29. 2 00 Update Time o hours Start Date 4 1 l Daylight Saving ment pay Time End Date 10 Month 31 gt Day Location Information Figure 3 30 System Setting Screen 46 SMCWHSG14 G Enable NAT Network Address Translation IP Plug and Play O Disable User Session Limited Enable 301 1024 O Disable Layer 2 Isolation Security 2 Enable Disable Any O Specify po HH ap po c sp Secure administrator IP addresses Multicast Pass Through Enable Disable Allow remote user to ping the device Enable Disable SSL Certificate Default Customer Certificate Figure 3 31 System Setting Screen tem Default Description The system name can consist of up to 40 System Host Name Empty l alphanumeric characters The Domain name can consist of up to 80 Domain Name Empty l alphanumeric characters Location Information Empty Enter your location information Date Time System The system date of the Wireless Subscriber Gateway Date Year Month Day l l l Date The valid setting of year is from 2002 to 2035 System l l l Time Hour Minute Second 7 The system time of the Wireless Subscriber Gateway ime Get from my Computer Get from my Computer button to correct the system date and time Get from NTP server Click Get from NTP server button to correct the system date and time SMCWHSG14 G 47 tem Default Description Enables or disabl
30. 23 56 23 23 56 O Delete Delete All GO 1 y Page M First 4 Previous Next gt End MM Figure 3 21 Account List Click on refresh button to update the account list page EN Status Username Usage Time Time Created Login Time Expiration Time The field name button in this list show that this list can be sorted in ascending descending order according to the corresponding field name Delete Select the check boxes and click Delete to delete accounts Delete All Delete all accounts in account list Note This page will refresh automatically every 5 minutes SMCWHSG14 G Customize Printout Text Logo Title Subtitle Username Password M Billing Method M Billing Profile M Purchase Unit Usage Time M Price Tax M ESSID Wireless Security I Additional Label 1 I Additional Label 2 M Print out Time M Expiration Time M Ending Q Preview of PC connected printer Q Preview of account generator printer Qi Preview of Post Paid Printout Customize printout text This function allows you to produce custom bill based on your requirements CUSTOMIZATION Account Printout Customization Only for PC connected printer Welcome Max 75 Hotspot Intemet Service Max 60 Usemame Max 24 Password Max 24 Time To Finish Biling Time to Finish Max 24 Accumulation Billing Accumulation Max 24 Servioe Max 24 Unit Max 24 Usage
31. 3 33 WAN LAN Setting Screen ED Click Apply button to save the new settings Click Apply button then Restart dialog box will appear Click Apply to restart the system SMCWHSG 14 G 49 RESTART Do you want to restart the system Figure 3 34 Restart Dialog Box WAN LAN LAN IPF Address 192 168 2 1 Subnet Mask 255 255 253 0 e Device IP LAN IP Setting Figure 3 35 Device IP LAN IP Setting Hem Default Description IP Address 192 168 2 1 The internal LAN IP address of your Wireless Subscriber Server Gateway Subnet Mask 255 0 0 0 Enter the subnet mask for the IP address O WAN MAC Address Default WAN MAC Address Change to g 00 00 00 00 00 Figure 3 36 WAN MAC Address Setting tem scription O S IP Address The default MAC address is set to the WAN physical interface on device WAN Port Mode al DHCP Client hlostly for Cable modem users or Local Area Network 4 O Static IP C hlostliy for advanced Local Area Network environment WAN Port Mode O PPPoE C Mostly for ADSL modem users 1 O PPTP C Mostly for Europe ADSL modem users j Figure 3 37 WAN Port Mode Setting 50 SMCWHSG14 G DHCP Client The device can work as a DHCP client This allows the device to obtain the IP address and other TCP IP settings from your ISP If your xDSL Cable comes with this feature please enable Use DHCP Client a DHCP Client C hostiy for Cable modem users or Local Area Netwonk J Figure 3
32. 38 DHCP Client Setting Screen Static IP al Static IP Wiosthy for advanced Local Area Network environment y IP Address pooo ooo subnet Mask pooo o Gateway IP address pooo o Primary ONS Server Po secondary ONS Server Po Figure 3 39 Static IP Setting Screen lem Det O O IP Address Enter the IP address for the xDSL Cable connection provided by your ISP Subnet Mask Enter the subnet mask for the IP address Gateway IP Gateway Enter the Gateway IP address for the xDSL Cable connection provided by your ISP Primary DNS Server A primary DNS server IP address for the xDSL Cable connection provided by your ISP Secondary DNS Server A secondary DNS server IP address for the xDSL Cable connection provided by your ISP If the primary DNS Server IP were not available meanwhile Secondary DNS Server IP would start in the same time SMCWHSG14 G 51 PPPoE PPPoE mostly for ADSL modem users Username 7 Password PPP MTU Setting Fasa TCP MES Setting Masa service Mame 7 Connect on Demand lax Idle Tire ho Mir Keep alive Redial Period o Sec Figure 3 40 PPPoE Setting Screen tem Default Description of up to 80 alphanumeric characters and is case sensitive to 80 alphanumeric characters and is case sensitive PPP MTU Setting 1492 MTU Maximum Transfer Unit specifies maximum transmission unit size TCP MSS Setting 1452 MSS Maximum Segment Size specifies maximum segment s
33. 6 Account Process Diagram Can be replenished by subscriber Enable eo Three Button Printer Web based Account Generator Panel Three Button Printer Web based Account Generator Panel Button 4 011 30 minutes 30 minutes 1 00 Button E 02 1 hour 1 hours 2 00 Y Button 03 2 hours 2 hours 3 00 T Print to Account Generator Printer A C PC Connected Printer A Use Button A for Discount Price Plan based on Button Presses Disable only valid for Three Button Printer Figure 3 57 Three Button Printer Web based Account Generator Panel Setting Screen tem Default scription Button A C Define each button s billing profile Select one billing profile by clicking in the list box Select a printer to print out your account 72 SMCWHSG14 G tem Default Description Use for Discount Button A Select one button A C by clicking in the list box to Price Plan based on Disable assign the base charge and select enable to active the Button Presses discount price plan Preview Operate Click on button to preview and operate account generator panel Account Generator Panel Please choose one button from the following selections wiew Account List Figure 3 58 Account Generator Panel Welcome Username cxpkqb42 Password ym82mq93 Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 2004 11 26 15 55 42 S N 000004 Please start you
34. 61 219 38 89 bytes 32 time 30ms TIL 246 Reply from 61 219 38 89 bytes 32 time 40ms TTL 246 Reply from 61 219 28 89 bytes 32 time 30ms TIL 246 Figure 3 189 Ping Command Screen tem scription S IP or URL Enter the IP address or the URL link 3 4 7 Restart If your Wireless Subscriber Gateway is not operating correctly you can choose this option to display the restart Wireless Subscriber Gateway screen Clicking the apply button restart the Wireless Subscriber Gateway with all of your settings remaining intact RESTART Do you want to restart the system Figure 3 190 Restart Screen 3 4 8 Logout If you would like to leave the configuration page please click apply to exit LOGOUT Do you want to log out from the web configurator Figure 3 191 Logout Screen 172 SMCWHSG14 G Appendix A Signal Connection Arrangements RJ 45 Ethernet Port The Wireless Subscriber Gateway RJ 45 Ethernet port can connect to any networking devices that use a standard LAN interface such as a Hub Switch Hub or Router Use unshielded twisted pair UTP or shield twisted pair STP cable to connect the networking device to the RJ 45 Ethernet port Depending on the type of connection 10Mbps or 100Mbps use the following Ethernet cable as prescribed 10Mbps Use ElA TIA 568 100 Category 3 4 or 5 cable 100Mbps Use EIA TIA 568 100 Category 5 cable Figure A 1 RJ 45 Connector and Cable Pins Note To prevent loss of
35. AN MAC address 00 90 0E 00 60 C0 Network WAN Status Not Established WAN Type DHCP Client WAN IP Address None LAN IP Address 192 168 2 1 WAN Subnet Mask None LAN Subnet Mask 255 0 0 0 Default Gateway None DNS Wireless Wireless Service OK ESSID SMC Wireless Channel 6 Secure Mode Disable Traffic WAN TxData 10 RxData 0 TxError 0 RxError 0 LAN TxData 83 RxData 77 TxError 0 RxError 0 Wireless TxData 2 RxData 0 TxError 0 RxError 0 iew with Microsoft Internet Explorer 5 0 above Figure 3 4 System Quick View Reset Click on reset button to clear the username and password data Note amp This Web agent is best viewed with IE 5 0 or Netscape 6 0 and above browsers If you would like to change the password please see Step 10 Username and Password can consist of up to 20 alphanumeric characters and are case sensitive If for some reason your password is lost or you cannot gain access to the Wireless Subscriber Gateway Configuration Program please press the reset button to load the device to manufacturer defaults If the Wireless Subscriber Gateway doesn t send packet in 5 minutes default the Wireless Subscriber Gateway wills logout automatically Proxy needs to set disable first when administrator accesses admin Ul 22 SMCWHSG14 G Step 3 Internet Connection Setting Select the appropriate Internet connection type to connect to your ISP Internet Connection Please choose one from the following selections DHCP
36. Button Presses M Charge by levels Level Conditions Button Presses Unit Price same as base charge 4 when gt OO 5 when gt Pp E when gt Pp 7 when gt po 8 when gt po 3 when gt po 10 when gt pb A Figure 3 67 Example 3 Amount 2 x 2 00 4 x 1 50 1x 1 11 00 80 SMCWHSG14 G Below is an example of the account printout Welcome Username v6w3xd48 Password ir39mg84 Billing Time to Finish Service 1 hour Unit 7 Usage lime 07 00 00 Total 11 00 ESSID Wireless 2004 11 29 10 43 48 S N 000013 Please activate your account before 2004 11 29 22 43 48 Thank you very much Figure 3 68 Account Printout SMCWHSG14 G 81 e Discount Price Plan based on Button Presses Discount Price Plan based on Button Presses Charge by levels Level 1 2 same as base charge Conditions Button Presses Unit Price when gt 1 when gt po ss when gt po Po when gt a ss when gt po when gt a when gt fo when gt f when gt a when gt eo ss Figure 3 69 Discount Price Plan Setting Screen Description Button Presses Enterthetimesofpressingbutton Unit Price Enter tne amount of charge leve ooo B Click Apply button to save the new settings Level Click Apply button the success dialog box appears Click on Back to return to Accounting setting screen 82 Success The
37. Client Figure 3 5 Internet Connection Setting Screen DHCP Client The device can work as a DHCP client This allows the device to obtain the IP address and other TCP IP settings from your ISP If your xDSL Cable comes with this feature please enable Use DHCP Client Internet Connection Please choose one from the following selections DHCP Client Figure 3 6 Internet Connection Setting Screen DHCP Client Setting SMCWHSG14 G 23 O Static IP Setting If Static IP Setting is selected then this screen will appear Enter the IP address information provided by your ISP Internet Connection Please choose one from the following selections Static IP Setting IP Address 0 0 0 0 subnet Mask pooo sateway IP address Primary DNS Server hs secondary UNS Server D Figure 3 7 Internet Connection Setting Screen Static IP Setting item Default Desert IP Address 0 0 0 0 Enter the IP address provided by your ISP Subnet Mask 0 0 0 0 Enter the subnet mask for the IP address Gateway IP 0 0 0 0 Enter the Gateway IP Address provided by your ISP Primary DNS Empty Enter the primary DNS server IP address for the xDSL Cable connection provided by your ISP Secondary Empty Enter the secondary DNS server IP address for the xDSL Cable DNS Server connection provided by your ISP If the primary DNS Server IP were not available meanwhile Secondary DNS Server IP would start in the sam
38. DA a a an des 86 3 210 GUSOMIZ IO ra 94 3 21 Pass INTO Mia AS ATAR 120 SL ZIMIO Yad Ocal Wiad a a ee a a a dec a Usha APai i 122 BPE M NAN es nese sence snc trade II O dude Gea hac AEA AA TAE tedeaar ae 124 32014 Ona ladera daha dase 125 A A A R a A 126 A AE Poctnusaaminewieauereds EE 127 6 SMCWHSG14 G Oe Ts DONG sora ae Raa eiee EEA Wein svased cane E EER taanenelc ads E R ONEEN 129 LEO LAN DEVICES eater satis ate Rca caret os ok cutie a acoione aplasia ada dale aitatastdak tats hag th cetocntat ti aumatdusanteled 131 SN A A EN doa 133 AS A scien sivdentelsdavtacsuaabeia a ce mambuerouemumbedeens 140 32 21 BANC WIC assis dba 141 32222 SECO REMOT er UT A A Aten ARA 142 3223 OIM A AA 143 De Ee WV INS IOSS dadas 145 39 220 MISCELANEA A EA eee 149 OHO OY SOMO US A A cadet A S a AEE 150 3 351 SU SIGN ni a A Da 151 3 32 SAGCOUNE ia a ii 153 3390 YACCOUNEL OO tintados 154 CoO CU US el E E ie ocak hd 155 9 907 IDA 156 3950 SOON MS A A A AE ANOETA 156 Sood LAN DEVICES ti a A rt 157 SS pas aeiac E EE T AE eae se RER 157 SAA OIG AN AU OMN a io ee ias 158 9422 Fimware Upgrade aia 159 Ns a ear eed watiteds cance tennencaaute aay pa eeeeum eum tamencoeteeenmaamensraadar tues eaneaneeus 161 JAA SNS tem ACCOUN i crise te cd detect da boaeisre ch seek Sah ta bo dit 161 OAs sO OL Cenalle IN AS 166 24 0 RING COMINO ai 167 SAT RESE a a a ol atau ds tehvadaartded E A armen na iaste ical weaned 167 OG Logout ara sanctus tactician gatas ll dance
39. Dynamic IP settings for the PC We recommend that you leave your IP settings as automatically assigned By default the Wireless Subscriber Gateway is a DHCP server and it will give your PC the necessary IP settings 18 SMCWHSG14 G 2 4 Getting Start 1 Place the Wireless Subscriber Gateway and AG 200E Printer on a flat work surface 2 Connect the Ethernet cable to the Wireless Subscriber Gateway s LAN port 3 Connect the other end of the Ethernet cable to the AG 200E Account Generator Printer s RJ45 port 4 Ensure that your modem and computer are both switched on 5 Use the supplied cable to connect the Wireless Subscriber Gateway s WAN port to the modem Check that the Cable xDSL Status LED lights 6 Connect your computer to one of the 10 100 LAN ports on the Wireless Subscriber Gateway Check that the LAN Port Status LED lights 7 Configure the further parameters via a Web browser AG 200 Rear Panel T oO Wireless Subscriber Gateway Me Internet Up AG 200E Account Generator Printer A xDSL Cable Modem AG 200E Rear Panel o LALLI g t SWI il ol wW MA tase wa E Mi AG 200E Account Generator Printer ON de HEH MW Notebook Server Notebook Figure 2 4 Wireless Subscriber Gateway Connection SMCWHSG14 G 19 2 2 POE Power over Ethernet Application R3 232 LAN 1 LAN 2 LAN 3 LAN 4 Po PWRSV POE Device Power over Ethernet xDSL Cable Modem W W
40. IZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF ITS PRODUCTS SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY THIRD PERSON S MISUSE NEGLECT IMPROPER INSTALLATION OR TESTING UNAUTHORIZED ATTEMPTS TO REPAIR OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD LIMITATION OF LIABILITY IN NO EVENT WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE SHALL SMC BE LIABLE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE LOSS OF BUSINESS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF ITS PRODUCTS EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SMCWHSG14 G SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS WHICH MAY VARY FROM STATE TO STATE NOTHING IN THIS WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS SMC will provide warranty service for one year following discontinuance from the active SMC p
41. O Figure 2 1 Wall Mounting Bracket Bottom of Wireless Subscriber Gateway Please refer to the following instructions for mounting a Wireless Subscriber Gateway on a wall or other surface 1 Install two screws on a wall according to the relative positions shown below A 175 70 mm A Pol QS QS Figure 2 2 2 Hang Wireless Subscriber Gateway on the wall by sliding the two screws in the mounting brackets 2 1 1 Bracket Mounting 1 Attach the brackets to the device using the screws provided in the mounting kits 16 SMCWHSG14 G 2 Mount the device in the rack using three rack mountings screws Note If the screws are not properly anchored the strain of the cables connected to the Wireless Subscriber Gateway rear panel connectors could pull out the Wireless Subscriber Gateway from the wall 2 2 Connecting the Antennas The Wireless Subscriber Gateway provides two antenna connectors on the rear of the unit 2 3 Installation Requirements Before installing the Wireless Subscriber Gateway make sure your network meets the following requirements System Requirements The Wireless Subscriber Gateway requires one of the following types of software e Windows 98 Second Edition NT 2000 XP O Red Hat Linux 7 3 or later version e MAC OS X 10 2 4 or later version e Any TCP IP enabled systems like Mac OS and UNIX TCP IP protocol installed O Standard phone line for xDSL modem Or Coaxial cable for Cable modem e Web Browser
42. ON This feature can backup the system configuration from this device to your PC or restore your stored system configuration to this device Backup Click Backup to backup the system configuration from this device to your computer or to the remote TFTP server Remote TFTP Server IP Address Apply j File Name Restore To restore your stored system configuration to this device Local P File Path Browse Remote TFTP Server IP Address File Marne Reset the system back to factory defaults Keep subscriber profile Figure 3 172 Configuration Setting Screen fem Default Description Click it to save the system configuration to your computer export cfg Remote TFTP Server IP Empty Enter the IP address of TFTP Server File Name Empty Enter the file name in the File Name field Restore Click it to restore your system configuration Local PC File Path Enter the file pathname of the system configuration file in the Local PC File Path field Remote TFTP Server IP Empty Enter the IP address of TFTP Server Address File Name Empty Enter the file name in the File Name field Reset the system back Erase all setting and back to factory setting to factory defaults Keep subscriber profile Disable Click the keep subscriber profile to change all the parameters into factory setting but still reserve the subscriber profiles SMCWHSG14 G 163 3 4 2 Firmware Upgrade The Firmware Upgrade menu loads up
43. Only for keypad application The subscribers can access Internet without pre defined usage time This can be operated with an optional external PS 2 keypad which is connected with exclusive printer The printout will only show the username password An account can also to be terminated with the optional keypad Figure 3 79 Billing Setting Screen 92 SMCWHSG14 G Step 2 Click the Keypad in Advanced Setup Menu define the Billing plan of pre paid and click Apply KEYPAD The Keypad is the optional external PS2 numeric keypad which ts connected with exclusive printer Use for Pre Paid Billing Keypad Hot Key Billing Profile 01 30 minutes 30 minute s 1 00 be 01 30 mimates 30 minute 1 00 __ fee Figure 3 80 Keypad s Hot Key Setting Screen Step 3 You can use keypad to create subscriber accounts now Press keypad hot key and then press Enter A new subscriber account is generated and the account information should be printed 7 The first Billing Profile 4 01 30 minutes 30 minute s 1 00 Enter Welcome Hotspot Internet Service _ Username b4e55f35 Password xz6g6n82 Billing Time to Finish Service 30 minutes Unit 1 Usage Time 00 30 00 Total 1 00 Tax 0 00 Grand Total 1 00 ESSID Wireless WEP 2003 11 06 11 19 05 S N 000001 Please activate your account before 2003 11 06 23 19 05 Thank you very much gt The second Billing Profile 02 1
44. P address The Wireless Subscriber Gateway will send all of its logs to the specified syslog server Server MAC Address Empty Enter the syslog server s MAC address The Wireless Subscriber Gateway will send all of its logs to the specified syslog server 138 SMCWHSG14 G tem Default Description E mail Server IP Address or Domain Empty Enter the SMTP server IP address or domain name The Name maximum allowed characters length is 50 SMTP Port 25 The SMTP port allowed range is 25 or 2500 to 2599 E mail SMTP Server Disable If your SMTP server requires authentication before accepting needs to check my e mail click on check box These values username and account password are supplied by your network administrator SMTP server provider or ISP Empty Enter the username for the SMTP server The maximum allowed characters length is 64 Empty Enter the password for the SMTP server Empty Enter the name you would like to appear in the message from U C Q no B 8 m 5 3 3 a D field of your outgoing message The maximum allowed characters length is 20 Empty Enter your e mail address This is the address others will use to send email to Email Address 1 Email Address 2 Empty Enter your first e mail address to receive the logs Empty Enter your second e mail address to receive the logs Email Address Z o i D m A o Email Address 1 Email Address 2 Click Apply
45. SG14 G 83 fem att escription Need Disable If your Merchant Provider need password to authorize click the check box to enable this function Empty Enter your Merchant password Merchant Transaction Empty The Merchant Transaction Key can be obtained directly Key from Authorize net The Merchant Transaction Key is similar to a password and is used by the Payment Gateway to authenticate transactions The maximum character of the Merchant Transaction Key is 50 Payment Gateway https secur Enter the address of Payment Gateway e authorize net gateway transact dll Information password would be sent to subscriber Email Additional a whether Email additional information should be Information sent to the subscriber customer Enable Disable Email of subscriber allowed characters length is 40 Username and Password a e Email Additional Information included subscriber Enable Disable username and password would be sent to subscriber Enable Disable time would be sent to the subscriber iValidate net Merchant ID Empty Enter your Merchant ID This is a Merchant Identification Number that you re received from your Merchant Provider The maximum character of the Merchant ID is 20 Device ID Empty Enter your Device ID This is a Device Identification Number mel al that you re received from your Merchant Provider The maximum character of the Device ID is 20 84 SMCWHSG14 G tem Defaut Description Secure Serv
46. Software Microsoft I E 5 0 or later version or Netscape Navigator 5 0 or later version e One computer with an installed 10Mbps 100Mbps or 10 100Mbps Ethernet card e UTP network Cable with a RJ 45 connection Package contents Note Prepare twisted pair cables with RJ 45 plugs Use Cat 5 cable for all connections Make sure each cable not exceed 328 feet Approximately 100 meters SMCWHSG14 G 17 ISP Requirements Verify whether your ISP use fixed or dynamic IP If it is a fixed IP be sure to get the IP from your ISP For dynamic IP which is mostly used the PC will get the IP automatically whenever it hooks up on the modem Dynamic IP e Dynamic IP Setting Fixed IP e Your fixed IP address for the Wireless Subscriber Gateway e Your subnet mask for the Wireless Subscriber Gateway e Your default gateway IP address e Your DNS IP address PPPoE e Your user name from your ISP O Your password from your ISP PPTP e PPTP Server IP Address from your ISP e PPTP Local IP address from your ISP e PPTP Local IP subnet mask from your ISP e Your user name from your ISP O Your password from your ISP Your PC Requirements The Static IP settings for the PC e Your PC s fixed IP address e Your PC s subnet mask e Your PC s default gateway IP address e Your PC s primary DNS IP address Note 1 The gateway s default IP address setting is 192 168 2 1 2 The gateway s default subnet mask setting is 255 0 0 0 The
47. Time Max 24 Total Max 24 Tax ma 24 TOTAL Grand Total Max 24 ESSID Max 24 WPA WPA Max 24 WEP WEP Max 24 Max 24 Value Max 24 Max 24 Value Max 24 Format ymad HH xara ss HH 24h hh 12h t AMIPM Please activate your a account before Description ha Max 24x3 Format yyyynmild y HH miss y HH 24h hh 12h tAMIPM Please finish your usage time within 3 months after your first Accumulation login Ej Max 24x4 Thank you very much a El Max 24x10 Figure 3 22 Customize Printout Text Setting Screen a Preview of PC connected printer Q Preview of account generator printer a Preview of Post Paid Printout Click the button to displays the account on the screen as it would appear when printed 40 SMCWHSG14 G Welcome Hotspot Internet Service Username Password PO PO Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 ESSID Wireless oN 0000011 200524 10 21 40 Please activate your account before 2003 21 22 21 40 Thank you very much Figure 3 23 Example PC connected printer Printout Time to Finish Welcome Hotspot Internet Service Username Password Billing Service Unit Usage Time Total ESSID oN 000001 100000000 100000000 Accumulation 30 minutes 1 0 30 00 1 00 Wireless 20041126 15 37 06 Please activate your account befo
48. Trace Disable Disables or enables session trace function Primary TFTP Server IP Empty Address Enter the IP address of the primary TFTP server Secondary TFTP Server Empty Enter the IP address of the second TFTP server IP Address Send Session Trace log 10 minutes The field means to send the session trace log file every file every minutes interval minutes The value range is 5 to 1440 minutes SMCWHSG14 G 145 3 2 21 Bandwidth The function enables administrator to limit bandwidth usage on a per user basis MAC address That prevents users from consuming a disproportionately large amount of bandwidth so every user gets a fair share of the available bandwidth BANDWIDTH Bandwidth Management Disable The function enables administrator to limit bandwidth usage on a per user basis MAC address That prevents users from consuming a disproportionately large amount of bandwidth so every user gets a fair share of the available bandwidth Please setup the maximum Upstream Downstream bandwidth Maximum Upstream 64Kbps C 64 Kbps 654 5120 Maximum Downstream 128Kbps C 64 Kbps 564 5120 Figure 3 152 Bandwidth Setting Screen item Defaut Description Bandwidth Enables or disables Bandwidth Management Maximum Upstream 64Kbps Specify the amount of upstream bandwidth 28Kbps Specify the amount of downstream bandwidth 146 SMCWHSG14 G 3 2 22 Secure Remote This feature allows you to create a sec
49. USER GUIDE SMCWHSG14 G User Guide Copyright Notice Copyright O 2005 2015 SMC NETWORKS Inc All rights reserved No part of this document may be copied reproduced or transmitted by any means for any purpose without prior written permission Disclaimer We shall not be liable for technical or editorial errors or omissions contained herein nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product We reserve the right to change the product specification without notice Information in this document may change without notice Trademarks Microsoft Win98 Windows 2000 and WinXP are registered trademarks of Microsoft Corporation General All other brand and product names mentioned herein may be registered trademarks of their respective owners Customers should ensure that their use of this product does not infringe upon any patent rights Trademarks mentioned in this publication are used for identification purposes only and are properties of their respective companies SMCWHSG14 G SMC s Limited Warranty Limited Warranty Statement SMC Networks Inc SMC warrants its products to be free from defects in workmanship and materials under normal use and service for the applicable warranty term All SMC products carry a standard 90 day limited warranty from the date of purchase from SMC or its Authorized Reseller SMC may at its own discretion repair or replac
50. all Outlet Figure 2 6 POE Connection Note To use the WG 601 s POE feature follow the instructions for your specific POE device 20 SMCWHSG14 G 3 Configuring the Wireless Subscriber Gateway 3 1 Setting Wizard Step 1 Start your browser and then enter the factory default IP address 192 168 2 1 in your browser s location box Press Enter Os hip 022 165 2 1 Figure 3 1 Web Browser Location Field Factory Default Step 2 The Wireless Subscriber Gateway configuration tools menu will appear In the Username and Password field type the factory default user name admin and password smcadmin and click Login If you are first time setting the system the wizard setup screen will appear You will be guided step by step through a basic setup procedure Username admin SMCWHSG14 G Password smcadmin U d gt Username admin Password Version 1 00 01a Figure 3 2 Configuration Tools Menu SMC WIZARD SETUP ADVANCED SETUP SYSTEM STATUS SYSTEM TOOLS Networks Internet Connection A INTERNET 2 WIRELESS 3 E MAIL 4 AUTHENTICATION 5 BILLING 6 PRINTER 7 ACCOUNTING 8 SYSTEM Please choose one from the following selections DHCP Client E Figure 3 3 Wizard Setup Screen SMCWHSG14 G 21 System Quick View System System Host Name Firmware Version 1 00 04 Location Name Domain Name System Time 2004 7 2 16 08 58 System Up Time 00D 00H 01M 11S WAN MAC address 00 90 0E 00 60 C1 L
51. any data encryption Select enable to enable WPA or WEP data encryption WPA Encryption Wi Fi Protected Access Encryption Enter a pre shared key from 8 to 63 case sensitive ASCII Pre shared Key Empty characters Group Key l l o l 86400 Seconds Enter a number in the field to set the force re keying interval Re Keying Use WPA with Enable Pre shared Key Enter a pre shared key from 8 to 63 case sensitive ASCII Pre Shared Key Empty characters Use WPA with Disable RADIUS Enter the RADIUS server IP address or domain name The Server IP Empty l l maximum allowed characters length is 15 Enter the authentication port number The allowed numbers Authentication Port 1812 are from O to 65535 Share Secret Key Empty Enter the RADIUS secret key WEP Encryption Wired Equivalent Privacy Encryption l l The Wireless Subscriber Gateway supports 64 bit or 128 bit Encryption 64 bit l WEP encryption Options HEX Hexadecimal and ASCII American Standard Mode HEX l Code for Information Interchange SMCWHSG14 G 151 item Default Description This selects which of the Keys the Wireless Subscriber Gateway uses when it transmits You can change the selected encryption key every now and then to increase the security of your network Note You have to configure all WEP keys 1 4 and select one of the four WEP key WEP Key Enter 5 characters case sensitive for ASCII 64 bit WEP Key Enter 10 characters case sensitive
52. ate your account before 200411129 22 09 34 Please finish Your usage time within 3 months after your first login Thank you very much Figure 3 62 PC connected Printer Printout Accumulation Note Before configuring the accounting you have to setting the billing profile of Web based account generator panel 76 SMCWHSG14 G Example If press 7 times e Discount Price Plan based on Button Presses is disabled Three Button Printer Web based Account Generator Panel ee 130 minutes 30 minutes 1 00 area 3 2 hours 2 hours 3 00 Print to Account Generator Printer A C PC Connected Printer A Use Button A for Discount Price Plan based on Button Presses Disable only valid for Three AAA AAA AAA AAA AAA AAN Button Printer Figure 3 63 Example 1 Amount 7 x 2 00 14 00 Welcome Username 2 128n32 Password 5a 89135 Billing Time to Finish Service 1 hour Unit 7 Usage Time 07 00 00 Total 14 00 ESSID Wireless 2004 11 29 10 34 58 S N 000011 Please activate your account before 2004 11 29 22 34 58 Thank you very much Figure 3 64 Account Printout SMCWHSG14 G 77 Discount Price Plan based on Button Presses is enabled The Charge by level is disabled Three Button Printer Web based Account Generator Panel Button 4 01 30 minutes 30 minutes 1 00 Button B 02 1 hour 1 hours 2 00 Button E 03 2 hours 2 hours 3 00 X Print to Acc
53. ax 23 characters optional Figure 3 144 DDNS Setting Screen 134 SMCWHSG14 G tem Defaut Description Force to update every Enter a number in the field to set the force update interval day s when WAN IP in days address keeps no change No 01 03 The index number of a DDNS account Click on check box active or inactive the DDNS record Update Status Now Click the Update Status Now button to do manual update Settings Enter the account information of DDNS Server Status YY MM DD Display the update date time and status The Status area HH MM SS shows the update time and current state of the DDNS Client N A DDNS Client service not installed Update Successfully DDNS Client service installed service running Update Fail DDNS Client service installed service not running Service Provider Dyndns org Select a DDNS service provider by clicking in the list box www dyndns org Note Before configuring the DDNS settings you have to register a dynamic domain at one of the dynamic domain service providers list box Enter the host name of DDNS server The maximum character of the registered host name is 100 Enter the user name of DDNS server Enter the user password of DDNS server Email Address Empty Enter your email address The DDNS Server will e mail pee pe you important information once your Internet Name has been successfully registered Wildcards optional Disable Enable this function t
54. be sent once after subscriber logout Description A log would be sent after a billing log is created Description A log including current LAN Devices Status will be sent according to specified interval time A log will be sent if one of the LAN Devices detected result is F ail Figure 3 149 Log Settings Screen tem ImtervalTime server address Interval Time 60 minute s When system reboot When system manager login or logout Interval Time 0 minute s 0 minute s D D Interval Time When an account is created When an account is activated When subscriber logout Interval Time When log created Interval Time 60 minute s When device fail Click on check box send log information to your syslog Click on check box send log information to your e mail 140 SMCWHSG14 G tem ImtervalTime System Syslog Information 60 minutes The log included system information would be sent according to specified interval time Format Id Mac Address System Uptime 0 days 00h 04m 00s Location Name Location Name WAN FrameTxOK FrameRx0K FrameTxError FrameRxError LAN FrameTxOK FrameRxOK FrameTxError FrameRxError Wireless FrameTxOK FrameRxOK FrameTxError o reboot Format ld MAC Address E Up System Manager When system A log will be sent if system manager Administrator Activity Information manager login Supervisor or Account Manager login t
55. bles or disables the accounting service Interim Update Time 5 Minutes Specify the interim update time Authentication Method CHAP Enter the authentication method of RADIUS server WISPr Smart Client Enables or disables WISPr Smart Client roaming function Login Mode Options Directly Reply Proxy Reply with Redirect Login Page URL and Proxy Reply with Specific URL The login mode information for the IPASS GIS connection Provided by your ISP SMCWHSG14 G 63 3 2 6 Billing The function is used to setup a billing profile A billing profile is a description of how you want to charge your customer BILLING Pre Paid The subscribers can access Internet with pre defined usage time l Enable Credit Card Service Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop to access the Internet before run out Accumulation The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out O Post Paid Only for keypad application The subscribers can access Internet without pre defined usage time This can be operated with an optional external PS 2 keypad which is connected with exclusive printer The printout will only show the username password An account can also to be terminated with the opt
56. button to save the new settings Click Apply button the success dialog box appears Click on Back to return to Syslog setting screen Success The Configuration has been changed Figure 3 148 Success Dialog Box SMCWHSG14 G 139 e Log Categories SYSLOG Syslog System Syslog Email Log Settings Syslog Name O l System Information O System Boot Notice C System Manager Activity Information Subscriber Syslog Email Syslog Name O D Wireless Association Information O O Proprietary Accounting Syslog Email O O O O C C Billing Syslog Email O O Logged in Users Syslog Name Account Created Account Activated Subscriber Trace Syslog Name LAN Devices Management Category Syslog Email Syslog Name O LAN Devices Information O T LAN Devices Alarm Description A log including the system information will be sent according to specified interval time Once system reboots the log will be sent A log will be sent if system manager Administrator Supervisor or Account Manager login to or logout from the device Description A log including wireless users information will be sent according to specified interval time A login users information will be sent according to specified interval time Description A log will be sent once after an account is created A log will be sent once after an account is activated A log including subscribers login logout time will
57. characters a Preview of Standard Login Page Figure 3 117 Credit Customization Setting Screen Welcome Hot Spot Internet Service Username Password Enter Cancel or Click here to pay by credit card eS Ez Please contact us if you have any question DISCOVER Figure 3 118 Standard Login Page Enable Credit Card Service enable SMCWHSG14 G 113 Pb SYSTEM D WAN LAN P SERVER gt AUTHENTICATION E RADIUS E ACCOUNTING b CREDIT CARD b KEYPAD e CUSTOMIZATION bE PASS THROUGH e FILTERING L SHARE gt PORTAL PAGE e ADVERTISEMENT b WALLED GARDEN b DDNS L LAN DEVICES E SYSLOG b WIRELESS 114 BILLING ST SUSUNDETS Carr access imemetwmnth pre defined usage time l Enable Credit Card Service C Time to Finish time will start until run out even the subscriber stop to access the Internet before run out Accumulation The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out O Post Paid Only for keypad application The subscribers can access Internet without pre defined usage time This can be operated with an optional external PS 2 keypad which is connected with exclusive printer The printout will only show the username password An account can also to be terminated with the optional keypad Figure 3 119 Billing Setting Screen SMCWHSG14 G Service Selection Page Th
58. click the radio button of keep alive The Max Idle Time maximum value is 65535 minutes Keep alive and Redial Period Keep alive Disable Ts option keeps your PPTP enabled Internet access connected indefinitely even when it sits idle The Redial Redial Period 30 Seconds Period maximum value is 65535 seconds 28 SMCWHSG14 G Step 4 Wireless Setting This page allows you to define ESSID Channel ID and WEP WPA encryption for wireless connection INTERNET El Wireless Settings 3 E MAIL ESSID Wireless Case Sensitive 4 AUTHENTICATION Channel E Leave default if you dont know what to choose 5 BILLING 6 PRINTER 7 ACCOUNTING Figure 3 10 Wireless Setting Screen tem Defauit Description ESSID Wireless The ESSID is the unique name that is shared among all points in a wireless network It is case sensitive and must not exceed 32 characters Channel 6 Enter the channel ID for wireless connection SMCWHSG14 G 29 Step 5 E mail Server Setting Wireless Subscriber Gateway allows an extra Email server parameter to forward the subscriber s E mail 1 INTERNET E mail Service 2 WIRELESS Do you provide E mail server for SMTP redirect service 4 AUTHENTICATION 5 BILLING No 6 PRINTER Yes allow quests to send e mail as usual even if their configured mail 7 ACCOUNTING server is unavailable or behind a corporate firewall 8 SYSTEM Please enter E mail SMTP server
59. d 167 Appendix A RJ 45 Connector Description coocccccocccocccccccccnconcnnonocnnnnncnnnncnnnnnnnnnnnnnnncnononcnononnnnns 168 Appendix B Regulations EMI COMpllanCe ooccccoccncocccnccoccnonocononacononcnnnnncononannnonannnnnnnnonnrononanoss 169 SMCWHSG14 G 7 1 Introduction The Wireless Subscriber Gateway is a compact intelligent gateway integrated with a four port port based VLAN switch It provides Plug Play Internet access advanced security and network management The Wireless Subscriber Gateway is designed for service providers system integrator or hotspot venue operator without backend RADIUS Server to have integrated solution for rapid deployment which can start hotspot service quickly and easily and enhance service performance The Wireless Subscriber Gateway is an ideal solution for hotel lobbies coffee bars airport lounges conference facilities and other sites that commonly host business travelers and offers instant high speed Internet connections With its IP Plug and Play technology it accepts any client configuration login when client open browser the Wireless Subscriber Gateway immediately recognizes new end user and redirects their browser to customized Web pages There s no need for end user to change any of their default network Static IP e mail SMTP Server behind firewall or browser settings HTTP Proxy or load any special software to access hotspot service It s completely Pl
60. d Color FFFFFF The background text color can be specified color For the specified text color format please views the color grid The allowed format is Hexadecimal DNA th E Lo o EX AMBASS ADORA Titte Welcome lt __ r N Subtitte Hot Spot Internet Service t Username Password Cancel Button Enter Buttony Enter Cancel ee or Click here to pay by credit card TSUN CHE Message Card Message I DISCOVER Copyright Footnote Please contact us if you have any question A Copyright c 2002 2004 All Rights Reserved Figure 3 92 Login Page Screen Before you add logo to the login page please make sure the logo image file is defined For details see section 3 2 10 Customization gt Logo Please Upload Logo Image File First Figure 3 93 Error Dialog Box 100 SMCWHSG14 G Redirect This allow service provider to redirect the subscriber s browser to a specified home page Redirect Login Page URL Code Figure 3 94 Redirect Login Page Setting Screen Copy and paste the following HTML Code into your home page to produce redirect subscriber login page Redirect Login Page Code lt html gt lt body style font family Arial bgcolo FPFFFFF gt lt form method post action http 1 1 1 1 login cgi name apply gt lt div align center gt lt table cellSpacing 0 borderColorDark FFFFFF cellPadding 4 width 50 bgColom F7F7F borderColorLight BdcdaD borde
61. dated firmware to be permanent in flash ROM The download file should be a binary file from factory otherwise the agent will not accept it After downloading the new firmware the agent will automatically restart it e Manual Firmware Upgrade FIRMWARE ki Firmware Scheduled Upgrade Firmware Upgrade To upgrade the firmware click Browse to locate the firmware file or use remote TFTP server and click Apply Local PC File Path Browse Apply Remote TFTP Server IP Address File Marne Apply Figure 3 173 Manual Firmware Upgrade Setting Screen tem Default Description This allow administrator to upgrade the firmware via HTTP Local PC File Path Empty Enter the file name and location in the Local PC File Path field This allows administrator use TFTP server to upgrade firmware Remote TFTP Server IP Empty Enter the IP address of TFTP Server Address Empty Enter the file name in the File Name field Note 1 Before downloading the new firmware users must save the configuration file for restore configuration parameters of the device 2 Do not turn the power off during the upgrade process This will damage the unit 164 SMCWHSG14 G e Scheduled Firmware Upgrade Scheduled Firmware Upgrade is a program that enables an automatic upgrade to the latest firmware version through the TFTP server FIRMWARE Manual Firmware Scheduled Upgrade Firmware Upgrade This feature allows you to upgrade the system fir
62. device Resource Name Display the device name o o o IP Address DisplaythelP address of device MAC Address Display the MAC address of device Interface Display the interface of devices Disable Select the check boxes and click Delete to delete the share device s 129 Note 1 You must use the Search IP method to search for a device on the network Please follow steps below to search your device Click Start and then click Search Click Computers or People Click A computer on the network In Computer type the IP address of the device you want to find Click Search 2 The function support only Unicast and IP Protocol soul Click Add to List button to add a new entry Gp Click Apply button to save the new settings Delete All Click Delete All amp Apply button to delete all entries 3 2 14 Portal Page This feature allows redirecting subscriber s browser to a specified portal page after successful login PORTAL PAGE This feature allows to redirect subscriber s browser to a specified portal page after successful login URL Link Ey Figure 3 137 Portal Page Setting Screen item Default Description URL Link Empty Enter the URL Link page The input format can be http www yahoo com The maximum character of the URL Link is 200 En Click Apply button to save the new settings Click Apply button the success dialog box appears Click on Back to return t
63. device name is 20 Virtual Port o f virtual port number valid range is 60001 to 60050 or 5900 to 5910 Device IP Address Empty Enter the IP address of LAN device in the format XXX XXX XXX XXX Device Server Port Enter the server port of LAN device o een uaa MAC address of LAN device For input the device MAC address please use this format such like 0050BA8D2296 Select one interface of LAN device by clicking in the list box Delete All Click Delete All button to delete all entries En Click Apply button to save the new settings Note The system does not support FTP SMCWHSG14 G 137 3 2 19 Syslog The function allows the device to transmit event messages to your syslog server or your email address for monitoring and troubleshooting e Syslog Setting SYSLOG Syslog Log Settings Disable Enable Serer P Address FT Syslog Server on LAN Send to Server MAC Address Syslog Server Server 1 P Address Server P Address D Syslog Server on WAM Disable Enable IP Address or Domain Name SMTP Port p Email Server L E mail smite server needs to check my account Username Password Send to Email Marne Email From Email Address Email Address 1 Email To Email Address 2 Figure 3 147 Syslog Setting Screen ltem Default Description Syslog Enables or disables the syslog server function Syslog on LAN Server IP Address Empty Enter syslog servers I
64. e a low setting in areas where communication is poor or where there is a great deal of radio interference The preamble type is a section of data at the head of a packet that contains information the Wireless Subscriber Gateway Preamble Type Long Preamble and client devices need when sending and receiving packets The setting menu allows you to select a long short or dynamic preamble type Select open system shared Key or both Open System Allows any device to authenticate and then attempt to communicate with the Wireless Subscriber Gateway Using open authentication any wireless device can authenticate with the Wireless Subscriber Gateway but the device can only communicate if its WEP keys match the Wireless Subscriber Gateway Devices not using WEP do not attempt to authenticate with a Wireless Service Gateway that is using WEP Shared Key During shared key authentication the Wireless Subscriber Gateway sends an unencrypted challenge text Authentication string to any device attempting to communicate with the Open System i i O I Method p y Wireless Subscriber Gateway The device requesting authentication encrypts the challenge text and sends it back to the Wireless Subscriber Gateway If the challenge text is encrypted correctly the Wireless Subscriber Gateway allows the requesting device to authenticate Both the unencrypted challenge and the encrypted challenge can be monitored however which leaves the Wireless Subscriber Gatewa
65. e any product not operating as warranted with a similar or functionally equivalent product during the applicable warranty term SMC will endeavor to repair or replace any product returned under warranty within 30 days of receipt of the product The standard limited warranty can be upgraded to a Limited Lifetime warranty by registering new products within 30 days of purchase from SMC or its Authorized Reseller Registration can be accomplished via the enclosed product registration card or online via the SMC web site Failure to register will not affect the standard limited warranty The Limited Lifetime warranty covers a product during the Life of that Product which is defined as the period of time during which the product is an Active SMC product A product is considered to be Active while it is listed on the current SMC price list As new technologies emerge older technologies become obsolete and SMC will at its discretion replace an older product in its product line with one that incorporates these newer technologies At that point the obsolete product is discontinued and is no longer an Active SMC product All products that are replaced become the property of SMC Replacement products may be either new or reconditioned Any replaced or repaired product carries either a 30 day limited warranty or the remainder of the initial warranty whichever is longer SMC is not responsible for any custom software or firmware configuration informat
66. e choose from the following login page types Standard Please enter the customizable message on the standard login page C Logo Title Welcome has 80 characters subtitle Hot spot Internet Service hdax 80 Username Use mame hdax 20 Password Pas sword lax 20 Enter Button Enter Max 20 Cancel Button Can cel hdax 20 characters characters characters characters characters L Footnote Please contact us if you have any questio ghlas 240 characters M Copyright Copyright c 2004 2015 All Rights Resery cua so Background Color FFFFFF View Color Grid characters standard Login Page Preview Figure 3 91 Standard Login Page Customization Setting Screen ltem Default Description Select the check box to display service provider s logo Title Welcome Enter the title name of subscriber login page The maximum allowed characters length is 80 Subtitle Hot Spot Enter the subtitle name of subscriber login page The maximum Internet allowed characters length is 80 Service Footnote i Allow the administrator to input the footnote such like Pleas Contact to our Customer Service Center EXT 141 The maximum character of the footnote is 240 SMCWHSG14 G 99 ltem Defaut Description Copyright Enable The copyright is allowed the administrator to input a paragraph in the subscriber login page for copyright information The maximum character of the copyright is 80 Backgroun
67. e time 24 SMCWHSG14 G e PPPoE Point to Point Protocol over Ethernet If PPPoE is selected then this screen will appear Enter the username password and other major fields Internet Connection Please choose one from the following selections PPPoE Mostly for ADSL modem users E Username LP Password PO PPP MTU Setting Fasa TCP MES Setting E service Mame Connect on Demand hax Idle Time ho Mir Keep alive Redial Period 0 Sec Figure 3 8 Internet Connection Setting Screen PPPoE Setting ltem Default Derio Enter the user name provided by your ISP The user name can consist Username Empty l l 7 of up to 80 alphanumeric characters and is case sensitive Enter the user password provided by your ISP The password can Password Empty l l l 7 consist of up to 80 alphanumeric characters and is case sensitive MTU Maximum Transfer Unit specifies maximum transmission unit PPP MTU Setting 1492 size TCP MSS Setting 1452 MSS Maximum Segment Size specifies maximum segment size l Enter the service name provided by your ISP The service name can Service Name Empty l l l 7 consist of up to 64 alphanumeric characters and is case sensitive SMCWHSG14 G 25 ltem Defaut Deseripion Connect on Demand and Max Idle Time Connect on E You can configure your Wireless Subscriber Gateway to cut your nable Demand connection with your ISP after a specified period of time Max Idle Ti
68. er Address https www Enter the secure server address vious net m erchant proc esscc asp Secure Pay Merchant ID Enter your Merchant ID This is a Merchant Identification Number that you re received from your Merchant Provider The maximum character of the Merchant ID is 7 https www Enter the address of SecurePay Payment Gateway securepay c om au secur epay payme nts process 2 asp Paypal Business Empty Enter your Merchant PayPal account This is a Merchant Identification account that you re register on PayPal The maximum character of the Business is 127 Currency Code U S Dollar To Drop down the list It s includes Australia dollar AUD Canadian Dollar CAD Euro EUR Pound Sterling GBP Japanese Yen JPY and U S Dollars USD Identity Token Enter the Identities token form merchants profile in the Paypal site The maximum character of the Identity Token is 160 Payment Gateway https www Enter the address of Payment Gateway paypal cgi bi The maximum character of the payment gateway is 100 n webscr Note Please leave the Administrator s Email address in Advanced Syslog Email portion Credit Card icons to be Click on check box to display credit card icon on the login displayed on the login page page Gu Click Apply button to save the new settings Click Apply button the success dialog box appears Click on Back to return to Accounting setting screen SMCWHSG14 G 85 86 Success The Configuration ha
69. er the user name for web based account generator The user name can consist of up to 80 alphanumeric characters and is case sensitive 36 SMCWHSG14 G Hem Default Description o Z o Password account Enter the password for web based account generator The password can consist of up to 80 alphanumeric characters and is case sensitive Empty Enter the password for confirmation Preview Operate Click on button to preview and operate account generator panel Account Generator Panel Please choose one button from the following selections meen Wien Account List Button A Button B Button C Figure 3 19 Account Generator Panel Click on button to create a new account SMCWHSG14 G 37 Welcome Username 52n9rm36 Password adedc933 Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 ESSID Wireless WEP ADOS 21 14 36 oN OU000 1 Please start your account before A002 3 4 09 14 36 Thank you very much Close Print Figure 3 20 Example Account Printout 38 SMCWHSG14 G View Account List Click View Account List to display current account information ACCOUNT LIST List existing account s information SAN Status Usemame Usage Time Time Created Login Time Expiration Time Delete 2002 3 3 2002 3 4 000007 Un used 22165952 0 30 00 21 21 51 09 21 51 O ER 2002 3 3 2002 3 3 2002 3 3 000008 In used j4x9yt25 2 00 00 21 22 28 21
70. ernet Explorer 5 0 above Figure 3 179 Administrator Account Login Screen First Time SMCWHSG14 G 167 System Quick View System System Host Name Firmware Version 1 00 04 Location Name Domain Name System Time 2004 7 2 16 08 58 System Up Time 00D 00H 01M 11S WAN MAC address 00 90 0E 00 60 C1 LAN MAC address 00 90 0E 00 60 C0 Network WAN Status Not Established WAN Type DHCP Client WAN IP Address None LAN IP Address 192 168 2 1 WAN Subnet Mask None LAN Subnet Mask 255 0 0 0 Default Gateway None DNS Wireless Wireless Service OK ESSID SMC Wireless Channel 6 Secure Mode Disable Traffic WAN TxData 10 RxData 0 TxError 0 RxError 0 LAN TxData 83 RxData 77 TxError 0 RxError 0 Wireless TxData 2 RxData 0 TxError 0 RxError 0 Best View with Microsoft Internet Explorer 5 0 above Figure 3 180 System Quick View eo Web Based Accounting Manager Step 1 Start your Web browser and enter the factory default IP address192 168 2 1 in your browser s location box Press Enter J gt Y E http l921568 2 1 Figure 3 181 Web Browser Location Field Factory Default 168 SMCWHSG14 G Step 2 The Wireless Subscriber Gateway configuration main menu will appear Enter account as the Username and account as the password and click Login Figure 3 182 Web Based Accounting Manager Login Screen SMCWHSG14 G Username account Password account Username F account Version 1 00_01a Reset Step 3 After a valid user name and password have been pro
71. es NTP Network Time Protocol Time Server Network Time Protocol can be utilized to NTP Setting Disable synchronize the time on devices across a network A NTP Time Server is utilized to obtain the correct time from a time source and adjust the local time Enter the IP address domain name of NTP server The Server IP Domain Name Empty maximum allowed characters length is 100 GMT 12 00 Select the appropriate time zone for your location Update Time Enter the number of hours for update time Enables or disables Daylight Saving Time DST Set the Daylight Saving Time DST on the Wireless Daylight Saving Time Month Day Subscriber Gateway Adjust the begin time and end time NAT Network Address Translation NAT Enables or disables NAT Address Translation function Enables or disables user session limit function This o feature provides you an ability to control a number of User Session Limited Enable 30 l sessions allowed for particulars user s at the one time l Enables or disables plug amp play function When IP Plug and Play iPnP l Enable enabled the user neednt change their network Technology l l configuration to access the Internet If enable plug and play is selected you can enable l l Layer 2 Isolation Security function When the Layer 2 Layer 2 Isolation Security Enable l i Isolation Security enabled everyone cannot communicate with each other Options Any and Specify Administrator
72. etting Screen ltem Default Description Service Time to Finish Options Time to Finish or Accumulation Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop to access the Internet before run out Accumulation The subscriber can access Internet many times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out 32 SMCWHSG14 G Enter the appropriate currency unit or currency symbol It is the name of billing profile The maximum allowed characters length is 12 Usage Time 30 minutes The duration of the billing period When this period expires user account will be discontinued 1 00 2 00 3 00 Enter the amount of Internet service The amount maximum value is 999999 Step 8 Account Generator Printer Setting There are two different choices one is exclusive printer Account Generator Printer and the other is non exclusive printer Exclusive printer is a portable thermal printer that is integrated with Wireless Subscriber Gateway to press one button to generate accounts and receipt immediately without PC operating Non exclusive printer can use the PC Web based browser to print out user account Account Generator Use Account Generator Printer to generate account 4 INTERNET 2 WIRELESS em ee can use the bu
73. fication Message 2 Max 160 characters Thank Notification Message 3 2 Max 160 characters E IT Again Try Again Button z Max 40 characters Close Max 40 characters Close Button Q Preview of Fail Page Figure 3 128 Fail Page Setting Screen En Click Apply button to save the new settings 122 SMCWHSG14 G Welcome Hot Spot Internet Service Credit Card Number Fail SORRY your card could not be processed at this time Please use your backspace button and try again with a different credit card Thank youl Try Again Close Figure 3 129 Fail Page Click Apply button the success dialog box appears Click on Back to return to Credit Card Customization setting screen Success The Configuration has been changed Figure 3 130 Success Dialog Box SMCWHSG14 G 123 User Agreement Page This function allow user to design user agreement page of Internet Subscriber Server CUSTOMIZATION Login Page Logo information Account Printout Credit Card Usar Agroamant Window Page User Agreement Page Title Ej Max 100 characters Title Text Color 000000 View Color Grid Article E Max 5000 characters Article Text Color 000000 View Color Grid Article Background Color FERPEE View Color Grid Page Background Color FFFFFF View Color Grid Agree Button Agree Max 50 characters Disagree Button Do not agree Max 50 characters Standard User Agreement Page Preview Figure 3 131 User Agreemen
74. for Hex 64 bit WEP Key Enter 13 characters case sensitive for ASCII 128 bit WEP Key Enter 26 characters case sensitive for Hex 128 bit WEP 802 1x Enables or disables the 802 1x function l The Wireless Subscriber Gateway supports 64 bit or 128 bit Encryption 64 bit 802 1x encryption Re key Time 86400 Seconds Enter a number in the field to set the force re keying interval Enter the RADIUS server IP address or domain name The Server IP Empty maximum allowed characters length is 15 Enter the authentication port number The allowed numbers Authentication Port 1812 E from O to 65535 Share Secret Share Secret Key Empty Enter the RADIUS secret Enter the RADIUS secret key This value valid range is 1 to 1000 indicates the frequency Beacon Interval 200 interval of the beacon This value valid range is 256 2342 This setting determines the packet size at which the Wireless Subscriber Gateway issues a request to send RTS before sending the packet A low RTS Threshold setting can be useful in areas where RTS Threshold 2347 l l AI l l many client devices are associating with the Wireless Subscriber Gateway or in areas where the clients are far apart and can detect only the Wireless Subscriber Gateway and not each other 152 SMCWHSG14 G tem Default scription This setting determines the size at which packets are Fragmentation fragmented Enter a setting ranging from 256 to 2432 bytes Threshold Us
75. formation Validate net Merchant ID Terminal ID secure Server Address Secure Pay Merchant ID securePay Address 3 1 m l Need Password N https secure authorize net gateway transact dll l Merchant Name max 40 characters T Username and Password Usage Time https silverado trivalley com merchant processcc asp max https www securepay com au securepay payments proc characters Credit Card icons to be displayed on the login page O cs Tosco C l BankCard f Diners Club O op International PD Figure 3 48 Credit Service Setting Screen Error Please Set Credit Card Setting First Figure 3 49 Error Dialog Box Credit Card Service Enable item Defaut Description Time to Finish Enable The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop to access the Internet before run out 66 SMCWHSG14 G tem Default Deseription Accumulation Accumulation Disable The subscriber can access Internet many times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out Idle Time Out 5 Min s The idle time out valid range is 1 1440 If the idle time out is set as 5 minutes it means if the account doesn t send packet in 5 minutes the account will logout auto
76. g Setting Screen Step 2 Click the Keypad in Advanced Setup Menu Define the billing plan of post paid click Apply Use for Post Paid Billing Lee co wee w o Ss ee 0 ll Figure 3 83 Keypad s Hot Key Setting Screen 94 SMCWHSG14 G Step 3 You can use keypad to create subscriber accounts now Press Enter a new subscriber account is generated and the account information should be printed This account information is including serial number username password and account create time Welcome Username 27i28n32 Password 5a 89i35 ESSID Wireless WEP 2003 11 06 13 22 02 Please activate your account before 2003 11 07 01 22 02 Thank you very much Figure 3 84 Step 4 When subscriber wants to terminate the Internet service press serial number and then press Enter a bill should be printed S N 000001 al y Welcome Username 27i28n32 Password 5a789i35 Usage Time 00 32 01 Total 2 00 Thank you very much Figure 3 85 SMCWHSG14 G 95 Account Generator Printer Status Report Daily Account Report Printout a Press ABCAA Monthly Account Report Printout Q Press ABCBB System Status Report Printout Q Press ABCCC Network Report Printout Q Press ABCAB Enter ne date Uviontnvate Status Report PS 2 Keypad Daily Account Repon Pitot Qs fama Figure 3 86 Keypad s Hot Key List e Daily Account Report Printout Daily Account 2003 11 26 Press ABCAA Username 00
77. ge Setting Screen ltem Defaut Description Welcome Slogan Welcome The maximum allowed characters length is 80 Page Background B page background can be none or specified color For the background color format please views the color grid The allowed format is Hexadecimal Empty The article is allowed the administrator to input a paragraph in the subscriber login page for advisement or announcement The maximum character of the article is 1024 Article Text Color 000000 The article text color can be specified color For the specified text color format please views the color grid The allowed format is Hexadecimal Article Background None The article background can be specified color For the background Color color format please views the color grid The allowed format is Article Background Color Hexadecimal Information Empty Allow the administrator to input the text information such like address 2 E telephone number and fax information The maximum character of the information is 80 Comments Empty Allow the administrator to input the text comments such like Pleas Contact to our Customer Service Center EXT 141 The maximum character of the comment is 80 102 SMCWHSG14 G Browser Set Background Colors by RGB Figure 3 97 Color Gird Frame If Frame is selected the subscriber login page will be separate into Top Frame and Bottom Frame Bottom Frame is a default format for username and pass
78. gure 3 107 Information Window Billing Type Accumulation Can be replenished by subscriber Disable Information Window You can use Internet now This is an information window to show the usage and notice You can type http 01 1 1 1finto to open this window again without VPN connection Remaining Usage hh mm ss Ifyou don t want to continue using Internet please remember to logout Just click the Logout button Hotice Ifyou are going to use WFH connection now please close the message window before you run WPH connection Replenish Logout Figure 3 108 Information Window Billing Type Accumulation Can be replenished by subscriber Enable 108 SMCWHSG14 G Information Window You can use Internet now This is an information window ta show the Usage and notice You can type Atte 1 d1 dino to open this window again without WPA connection Connecting Usage 0 00 11 Figure 3 109 Information Window Super Subscriber Account Default username super amp password super Logout Successfully You have used 0 3 11 Close Figure 3 110 Logout Successfully Dialog Box Billing Type Accumulation Alarm You will be disconnected within 5 minutes Close Figure 3 111 Alarm Dialog Box1 SMCWHSG14 G 109 e Account Printout This function allow service provider to specified text of account printout CUSTOMIZATION Information User Agreement Login Page Logo Window Account Prin
79. hlas 160 characters Credit card number hias 30 characters Credit card expiration date hlas 30 characters Credit Card Code thiax 40 characters Enter Email Address hias 50 characters Submit Transaction and Login hias 40 characters a Preview of Service Selection Page 117 118 Welcome Hot Spot Internet Service Please choose from the following service selection Service Code Service Name Usage Time Charge a 1 30 minutes 30 minutes 1 00 C 2 1 hour 1 hours 2 00 C E 2 hours 2 hours 3 00 How many units of Internet access would you like to purchase 1 Please kindly note that there will be no refund once connectivity is confirmed Please note that the time block of selected service is based on continuous Usage Enter Payment Information all info is required call into is required Credit card number Credit card expiration date tri Enter Email Address First Hame FT Last Name FT Address FT City FT State Province FO ZIP Postal Code Country FT Phone fo Submit Transaction and Login Figure 3 123 Service Selection Page Authorize net SMCWHSG14 G Welcome Hot Spot Internet Service Please choose from the following service selection Service Code Service Name Usage Time Charge G 1 30 minutes 30 minutes 1 00 E 2 1 hour 1 hours 2 00 c 3 2 hours 2 hours 3 00 How many units of Internet access would you like to purchase 1 Please kindly
80. hour 1 hour s 2 00 Welcome Username 7spct858 Password jic7rp55 Billing Time to Finish Service 1 hour Unit 1 Usage Time 01 00 00 Total 2 00 Tax 0 00 Grand Total 2 00 ESSID Wireless WEP 2003 11 06 11 24 58 S N 000002 Please activate your account before 2003 11 06 23 24 58 Thank you very much Figure 3 81 SMCWHSG14 G 93 Step 4 Subscriber can use this account to access Internet now Use for Post Paid Billing Step 1 Click the Billing in the Advanced Setup menu select enable Post paid click Apply BILLING Pre Paid The subscribers can access Internet with pre defined usage time Enable Credit Card Service Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop to access the Internet before run out Accumulation The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out Post Paid Only for keypad application The subscribers can access Internet without pre defined usage time This can be operated with an optional external PS 2 keypad which is connected with exclusive printer The printout will only show the username password An account can also to be terminated with the optional keypad Figure 3 82 Billin
81. inistrator to have a list of restricted destinations which is useful to block specified Internet websites or Intranet areas FILTERING Filtering Disable Filtering allows the system administrator to have a list of restricted destinations which is useful ta black specified Internet websites or Intranet areas HTTP Message to display when a website is blocked This Web Site is blocked by System Please enter new restricted destination up to 50 entries URL or Website O Start End IP Address l C P Address Subnet Mask Restricted Destination List Delete All Figure 3 134 Filtering Setting Screen ltem Defaut scription Filtering Enables or disables filtering function Warning This Web Site is blocked by System Back Figure 3 135 Error Dialog Box SMCWHSG14 G 127 ltem Defaut Description Restrict Destination URL or Website URL or Website Empty Enter the URL Page of you wants to filter please use this format such like http www yahoo com The maximum character of the URL Page is 50 Start End IP Address Z Start IP Address Empty Enter the start IP address of you wants to filter End IP Address Empty Enter the end IP address of you wants to filter IP Address Subnet Mask Subnet Mask Empty No The index number of fitering address Address List Display the filtering address s ooo Delete Disable Select the check boxes and click
82. ion or memory data of Customer contained in stored on or integrated with any products returned to SMC pursuant to any warranty Products returned to SMC should have any customer installed accessory or add on components such as expansion modules removed prior to returning the product for replacement SMC is not responsible for these items if they are returned with the product SMCWHSG14 G Customers must contact SMC for a Return Material Authorization number prior to returning any product to SMC Proof of purchase may be required Any product returned to SMC without a valid Return Material Authorization RMA number clearly marked on the outside of the package will be returned to customer at customer s expense For warranty claims within North America please call our toll free customer support number at 800 762 4968 Customers are responsible for all shipping charges from their facility to SMC SMC is responsible for return shipping charges from SMC to customer WARRANTIES EXCLUSIVE IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE CUSTOMER S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION AT SMC S OPTION THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SMC NEITHER ASSUMES NOR AUTHOR
83. ional keypad Billing Profile Currency E Number of decimals places 2 Tax Percentage 5 No Active Name max 12 characters Account Usage Time Charge 01 Y o minutes 30 minutes 1 00 el m ETT RT Bl bo 03 m hous P hours y Eo a o ACTA E fous ff eo 6 o ACT E hous i Eo 06 TT Co io hous Bl 500 e o Bey a oca el foo o o Fas arre IS TN mn IN ys sss Figure 3 46 Billing Setting Screen ltem Defaut Description The subscribers can access Internet with pre defined usage time 64 SMCWHSG14 G If you change billing mode Pre paid gt Post paid or Post paid gt Pre paid the system will erase all account and disconnect all on line users Microsoft Intemet Explorer x AN Change billing mode will erase all accounts and discommect all on line user OK Figure 3 47 Message Box tem Defauit Derio Enable Credit Card Service Disable Enables or disables the credit card service Before you enable credit card service make sure that your credit service is configured to work and the currency is American dollars You must be converting all prices on your billing page into American dollars U S dollars For details see section 3 2 8 Credit Service The credit card function only supports the American dollars SMCWHSG14 G 65 CREDIT CARD Authorize net Version Merchant ID Merchant Password Merchant Transaction Key Payment Gateway Email Additional In
84. is function allow service provider to customize the additional credit card message for the standard login page Service Selection Page Customize the message for the service selection page Service Selection Message Purchase Unit Message Notification Message 1 Notification Message 2 Notification Message 3 Enter Payment Information Enter Credit Card Number Enter Credit Card expiration date I Card Verification Value Enter Email Address Submit Button Please choose from the following service selection Max 80 characters How many units of Internet access would you like to Max 80 characters Please kindly note that there will be no refund once Max 160 characters Please note that the time block of selected service Max 160 characters A Max 160 characters Enter Payment Information all info is required Max 160 characters Credit card number Max 80 characters Credit card expiration date Max 80 characters Credit Card Code Max 40 characters Enter Email Address Max 80 characters Submit Transaction and Login Max 40 characters Additional Customer Data Merchants may provide additional customer information with a transaction based on their respective requirements l Customer ID M First Last Name Company Address City State Province ZIP Postal Code Country Phone Fax Customer ID ax 40
85. ize 52 SMCWHSG14 G SMCWHSG14 G tem Defaut Description Service Name Empty Enter the service name provided by your ISP The service name can consist of up to 64 alphanumeric characters and is case sensitive Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your Wireless Subscriber Gateway to cut Max Idle Time 10 Minutes your connection with your ISP after a specified period of time Max Idle Time lf you have been disconnected due to inactivity Connect on Demand enables your Wireless Subscriber Gateway to automatically re establish your connection as soon as you attempt to access the Internet again If you wish to activate Connect on Demand click the radio button lf you want your Internet connection to remain click the radio button of keep alive The Max Idle Time maximum value is 65535 minutes Keep alive and Redial Period Keep alive Disable This option keeps your PPPoE enabled Internet access Redial Period 30 Seconds connected indefinitely even when it sits idle The Redial Period maximum value is 65535 seconds 53 e PPTP ie PPTP C hiostly for Europe ADSL modem users 1 hy IPF Address PO hy Subnet Mask 7 Gateway IP address PPTP Server IP Address FO Username B Password 7 PPP MTU Setting ET TCP MSS Setting ET Connection IDvName AA Connect on Demand Max Idle Time ho Min Keep alive Redial Period Figure 3 41 PPTP Setting Screen
86. l RFC 2865 2866 Time to Finish Enable Service provider provides two different accounting calculate Accumulation for the Internet service Primary RADIUS Server Server IP Empty Enter the IP address of RADIUS server Authentication Port 1812 Enter the authentication port number the authentication port number must match with the RADIUS server setting The allowed numbers are from 0 to 65535 Accounting Port 1813 Enter the accounting port number the accounting port number must match with the RADIUS server setting The allowed numbers are from 0 to 65535 Share Secret Key Empty The share secret key the key number also has to match with the Server setting Up to 64 characters are allowed Secondary RADIUS Server Authentication Port 1812 Enter the authentication port number the authentication port ie must match with the secondary RADIUS server setting The allowed numbers are from O to 65535 Accounting Port 1813 Enter the accounting port number the accounting port number a match with the secondary RADIUS server setting The allowed numbers are from 0 to 65535 Share Secret Key Empty The share secret key the key number also has to match with a secondary RADIUS Server setting Up to 64 characters are allowed Retry times when 1 Specify the retry times when primary fail Primary fail 62 SMCWHSG14 G tem Default scription Retry Frequency 3 The field default value is 3 seconds Seconds Accounting Service Ena
87. les or disables the pass through function Destination URL IP Address Pass Through URL or Website URL or Website Enter the URL Page please use this format such like http www yahoo com The maximum character of the URL Page is 50 Start End IP Address Start IP Address Empty Enter the start IP address of you wants pass through End IP Address Empty Enter the end IP address of you wants pass through Subscriber IP MAC Address or LAN Device Pass Through amp Start End IP Address 3 Start IP Address Empty Enter the start IP address of you wants pass through End IP Address Empty Enter the end IP address of you wants pass through IF Address Subnet Mask IP Address Empty Enter the IP address of you wants pass through Subnet Mask Empty Enter the subnet mask of you wants pass through MAC address Mask FF FF FF FF FF FP No The index number of pass through address Address List Displaythepassthroughaddress s Type Display the type of pass through address Delete Disable Select the check boxes and click Delete to delete the pass through address s Add to List Click Add to List button to add a new entry Click Apply button to save the new settings Delete All Click Delete All amp Apply button to delete all entries Note The priority of pass through is higher than Filtering 126 SMCWHSG14 G 3 2 12 Filtering Filtering allows the system adm
88. lling period When this period expires user account will be discontinued Enter the unit rate amount i e 35 00 that most of your accounts are charged for one day of service 3 30 minutes 1 hour Key in Username Password and enjoy the internet access I want to Click onC button go to Internet Username Password Enter a IA NES ESSE p Here is your account 6 Total amount is 12 Welcome S N 001234 k Hotspot internet Service Pay the money to Hotspot Operator sername adx12 Password 1290831be Usage Time 2 hours Billing Time to Finish 8 After 2 hours Internet access time out 2003 10 25 10 30 40 Please activate your account etore 2003 10 25 22 30 40 Thank you very much Subscriber Hotspot Operator Figure 3 51 Pre paid Procedure Diagram 68 SMCWHSG14 G Welcome S N 001234 Hotspot Internet Service Username adx12dwe Password 129c831bc ESSID Wireless WEP Pda 2003 10 25 10 30 40 Please activate your account before 2003 10 25 22 30 40 Key in Username Password Press Enter I want to Account print out go to Internet an enjoy the internet access HotSpot Operator Username Password Clear D Please give me an account Key in Code number and Enter Total amount receipt print out O Subscriber lt otal amount is 12 AA Welcome
89. m The maximum character of the URL Link is 200 GD o Apply button to save the new settings SMCWHSG14 G 131 Click Apply button the success dialog box appears Click on Back to return to Advertisement URL Link setting screen Success The Configuration has been changed Mack Figure 3 140 Success Dialog Box 3 2 16 Walled Garden We prepare ten URL links that allows subscriber to access the specific Web pages even they didn t have a username or password It s free trying and can use for advertisement WALL GARDEN This feature allows subscribers to access the specific Web pages even they didn t have a username or password We provide ten URL links to use for free trying and can use for advertisement Link 1 Link 2 Link 3 Link 4 Link 5 Link 6 Link 7 Link 8 Link 9 Link 10 URL Figure 3 141 Walled Garden 132 SMCWHSG14 G Welcome Hot Spot Internet Service Username Password Enter Cancel Yahoo MSH Microsoft Figure 3 142 Login Page o lem Description O O Link 1 10 maximum allowed characters length is 80 a input format can be http www yahoo com The maximum character of the Link is 200 Click Apply button the success dialog box appears Click on Back to return to Walled Garden setting screen Success The Configuration has been changed a Figure 3 143 Success Dialog Box SMCWHSG14 G 133 3 2 17 DDNS The DDNS service
90. matically Accumulation Time to Finish login login logout login logout login Time Bar logout Time Bar finish Usage time A B C Usage time A Figure 3 50 Accumulation and Time to Finish tem Defaut Description Post Paid Disable The subscribers can access Internet without pre defined usage time This can be operated with an optional external PS 2 keypad that is connected with exclusive printer The printout will only show the username password An account can also to be terminated with the optional keypad Idle Time Out 5 Min s The idle time out valid range is 1 1440 If the idle time out is set as 5 minutes it means if the account doesn t send packet in 5 minutes the account will logout automatically Billing Profile Currency Enter the appropriate currency unit or currency symbol Number of decimals places Enter the number The field maximum value is 3 Disable This check box is used to indicate the taxable status of the account 5 Enter the tax rate i e a 5 sales tax is entered as 5 SMCWHSG14 G 67 tem Defaut Description No 1 10 The index number of billing profile In Advanced setup we provide 10 billing profile Active Click on check box active or inactive the billing profile Name It is the name of billing profile The maximum allowed characters length is 12 Account Usage time The duration of the bi
91. mation and Units will be SMCWHSG14 G 143 tem intervalTime LAN Devices Management Category LAN Devices Information 60 minutes A log including current LAN Devices Status will be sent according to specified interval time Format Id MAC Address LAN Devices Information Number of devices Start Number End number Device name LAN Devices Alarm When device A log will be sent if one of the LAN Devices detected results fail is Fail Format Id MAC Address LAN Device Alarm Device name FAIL ED Click Apply button to save the new settings Click Apply button the success dialog box appears Click on Back to return to Logs setting screen Success The Configuration has been changed Figure 3 150 Success Dialog Box 144 SMCWHSG14 G 3 2 20 Session Trace Session Trace is an intelligent function to help service provider to trace every user s access behavior When session trace is enable the system will collect information such like destination IP destination port source IP source MAC source port by every user and send the collected information in text format file to specified TFTP server SESSION TRACE Session Trace Disable Primary TFTP Server IP Address secondary TFTP Server IP Address Send Session Trace log file every fo minutes 51440 Note Session Trace log file will be sent also when collected 50 logs Figure 3 151 Session Trace Setting Screen Session
92. me If you have been disconnected due to inactivity Connect on Demand enables your Wireless Subscriber Gateway to automatically re establish your connection as soon as you attempt to access the Max Idle Time Internet again If you wish to activate Connect on Demand click the as radio button If you want your Internet connection to remain click the radio button of keep alive The Max Idle Time maximum value is 65535 eee 00 O E Keep alive and Redial Period alive and Redial Period A option keeps your PPPoE enabled Internet access connected Redial Period indefinitely even when it sits idle The Redial Period maximum value is Seconds 65535 seconds 26 SMCWHSG14 G e PPTP Client Point to Point Tunneling Protocol If PPTP is selected then this screen will appear Fill out all the information provided by your ISP Internet Connection Please choose one from the following selections RPTE Mostly for Europe ADSL modem users My IP Address fo My Subnet Mask FO Gateway IP address 7 PPTP Serer IP Address Po Username PO Password PPP MTU Setting haoo TCP MSS Setting oo sis Connection ID Name fo Connect on Demand Max Idle Time ho Mir Keep alive Redial Period o Sec Figure 3 9 Internet Connection Setting Screen PPTP Client Setting tem Defaut Description My IP Address Empty Enter the PPTP local IP address provided by your ISP Enter the PPTP local Subnet Mask IP address for the IP
93. mware on a regular hourly daily weekly basis automatically iz Disable Enable TFTF Server IP File Synchronization View Sample File Weekly Daily Hourly Sunday 00 Hour 00 tin Frequency Figure 3 174 Scheduled Firmware Upgrade Setting Screen Item Default Description OOOO Disable Enable Disables or enables the scheduled firmware upgrade function TFTP Server IP Empty Enter the IP address of TFTP Server File Synchronization Empty Enter the file name and location in the File Synchronization field View Sample Fil Click the button to display synchronization file example Frequency Weekly Set the firmware upgrade time The default value is Weekly synchronization Check File Sample Code Version 1 00 00 Filename wybllz bin Figure 3 175 Synchronization File Sample Code Note Do not turn the power off during the upgrade process This will damage the unit SMCWHSG14 G 165 3 4 3 Boot Code BOOT CODE To upgrade the Boot Code click Browse to locate the file and click Apply Local PC file Path Browse Figure 3 176 Boot Code Upgrade Setting Screen 3 4 4 System Account Use the System Account screen to change the system accounts SYSTEM ACCOUNT Administrator Account Administrator can fully control this system and modify all settings Username admin Password m Confirm Web based Accounting Manager Web based accounting manager can operate the proprietary web ba
94. n No Authentication Wireless Subscriber Gateway provides Built in Authentication for service provider to build up an Internet service without any extra authentication software lf Yes is selected service provider can generate the subscriber account inside Wireless Subscriber Gateway and the system will authenticate the subscriber login according to the generated account No Subscriber can direct access the Internet without enter username and password SMCWHSG14 G 31 Step 7 Billing Profile Setting The function is used to setup a billing profile A billing profile is a description of how you want to charge your customer 1 INTERNET Billing Profile 2 WIRELESS 3 E MAIL What is your service and price plan 4 AUTHENTICATION Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out 6 PRINTER even the subseriber stop to access the Internet before run out 7 ACCOUNTING Accumulation 8 SYSTEM The subscriber can access Internet several times with one account The system can keep and accumulate every single usage time until the pre defined usage time run out Service and Price Plan Currency F Number of decimals places E Ho Name max 12 char Usage time Charge 01 o minutes ao minutes 1 00 02 fi hour hours 2 00 03 2 hours 2 hours 3 00 Figure 3 13 Billing Profile S
95. n separate circuits 4 Consult the dealer or an experienced radio television technician for help Changes or modification not expressly approved be the party responsible for compliance could void the user s authority to operate the equipment Corporate Headquarters SMC Networks Inc 20 Mason Irvine CA 92618 174 SMCWHSG14 G TECHNICAL SUPPORT From U S A and Canada 24 hours a day 7 days a week Phn 800 SMC 4 YOU 949 679 8000 Fax 949 502 3400 ENGLISH Technical Support information available at www smc com FRENCH Informations Support Technique sur www smc com DEUTSCH Technischer Support und weitere Information unter www smc com SPANISH En www smc com Ud podr encontrar la informaci n relativa a servicios de soporte t cnico DUTCH Technische ondersteuningsinformatie beschikbaar op www smc com PORTUGUES Informa es sobre Suporte T cnico em www smc com SWEDISH Information om Teknisk Support finns tillg ngligt p www smc com INTERNET E mail address techsupport smc com Driver updates http www smc com index cfm action tech_support_drivers_downloads World Wide Web http www smc com 20 Mason Irvine CA 92618 Phn 949 679 8000 www smc com
96. n33 GO 17 Page m xport This allow you to export the account logs to a text file format export log Clear Log 2005421 4 13 44 46 2005 2 14 13 44 51 2005 21 4 13 44 54 2005421 4 13 44 87 2005251 4 13 45 03 0 30 00 1 00 00 2 00 00 2 00 00 2005214 13 45 40 2 00 00 WH First Figure 3 163 Account Log Click on Clear Log to remove all account log entries Click on refresh button to update the account log page Usemame Time Created Login Time Usage Time Charge Stats Export cen too Esr SiN Username Time Created Login Time Usage Time Charge Payment Info Status 1 00 Cash 2 00 Cash 3 00 Cash 3 00 Cash 3 00 Cash 4 Previous Next Click the column button to sort the column in ascending descending order SMCWHSG14 G Lin used Lin used Lin used Lin used In used End MH 159 3 3 4 Current User Display the current logged in subscribers status lt allow service provider to disconnect any subscribers List current user s information such as IP address and MAC address No Type Username IP Address MAC Address Disconnect Dynamic yfp23n33 192 168 100 192 00 00 6E 56 56 6E O Disconnect Disconnect All GO E Page M4 First 4 Previous Next gt End M Figure 3 164 Current User List CURRNET USER NO Type Username IP Address MAC Address Disconnect 1 Superuser super 192 168 100 192 00 0C 6E 56 56 5E O Disconnect Disconnect All
97. note that there will be no refund once connectivity is confirmed Please note that the time block of selected service is based on continuous Usage Enter Payment Information all info is required al into is required Credit card number Credit card expiration date Chine Enter Email Address Billing Address ZIP code Submit Transaction and Login Figure 3 124 Service Selection Page iValidate net SMCWHSG14 G 119 120 Welcome Hot Spot Internet Service Please choose from the following service selection Service Code Service Name Usage Time Charge 10 1 30 minutes 30 minutes 1 00 C z 1 hour 1 hours 2 00 C J 2 hours 2 hours 3 00 How many units of Internet access would you like to purchase 1 Please kindly note that there will be no refund once connectivity is confirmed Please note that the time block of selected service is based on continuous Usage Enter Payment Information all info is required cal into is requirect Credit card number Credit card expiration date EME Enter Email Address Submit Transaction and Login Figure 3 125 Service Selection Page SecurePay SMCWHSG14 G Successful Page Successful Customize the message for the successful page Page Yon may now use the Intemet successful Message Max 20 characters l IMPORTANT Make a note of Your usemame and password for lo Notification Message 1 Max 160 characters Notification Message 2 Max 160 characte
98. o Portal Page setting screen Success The Configuration has been changed Figure 3 138 Success Dialog Box 130 SMCWHSG14 G 3 2 15 Advertisement The system allow service provider to input 10 URL links for advertisement link purpose ADVERTISEMENT This feature allows ISP to specify the advertisement URL link The advertisement Web page will show on the browser when the subscribers start Network access Frequency One Time Only C Every p Mints Sequence ic Randomly C Orderly From 1 to 10 URL Link 1 E URL Link PO URL Link 3 CO URL Link 4 AAA URL Link 5 CO URL Link 6 URL Link 7 AAA URL Link 8 A URL Link 9 URL Link 10 Figure 3 139 Advertisement URL Link Setting Screen item Default Description Frequency One Time One Time Only One Time Only means to send the advertisement link Only once after the subscriber Login Every Min s The field means to send the advertisement link every interval minutes The value range is 1 to 60 minutes Sequence Randomly Randomly Display the advertisement page in the random order From 1 to 10 Display the advertisement page in the order as setting URL Link Empty This function allows the administrator to input ten different websites in the 1 10 table for advertisement And these 10 websites will display to the subscribers at random when the subscribers login in the Wireless Subscriber Gateway system The input format can be http www yahoo co
99. o be able to mydomain dyndns org and mydomain dyndns org Click Apply button to save the new settings SMCWHSG14 G 135 Click Apply button the success dialog box appears Click on Back to return to DDNS setting screen Success The Configuration has been changed lt iu Figure 3 145 Success Dialog Box 3 2 18 LAN Devices Administrator can direct remote control to LAN Devices via the Wireless Subscriber Gateway implemented the feature LAN DEVICES Detecting time 5 Min s Virtual Port Device Device Device E No Device Name 5900 5910 IP Address SaACRHH MAC Address Application Interface Wired X 1 Ethernet Switch e0001 fi92 168 100 123 feo pogoos002537 frcr E 2 fe dsc al jp ET a jp JJ jp jJ __ sp Jj jf__ Jb__ j __ el ssi YE SET gt iE ET ait ssi IE Sf ET al iE ET SEO e jJ __ sE jp sep Jp cojf fe Ef jJ ___ Notice The system does not support FTP dl Wired e Wired Z 4 O TD 4 Wireless Wired z sa gt y oOlllolllo aalo 4 4 4 Wired z Wired z 4 uu 4 Wired z Wired X Wired F Wired y Wired y Wired Wired JA Figure 3 146 LAN Devices Setting Screen Polling Interval e default value is 5 minutes The Polling Interval valid range is 1 to 1440 136 SMCWHSG14 G tem Default Description Device Name Empty The LAN device name The maximum character of the
100. o or logout from the device Format Id Mac Address System Account Activity Information Username User IP Status Username Administrator Supervisor Accounting Operator Status Login Logout Idle Time Out Wireless Association 60 minutes A log included wireless associated users information would be Information sent according to specified interval time Format Id Mac Address Wireless Association Information Number of associated users Start Number End number Signal strength Signal quality Connection speed MAC address SMCWHSG14 G 141 tem ImtervalTime Logged in Users 60 minutes A log included logged in users information would be sent according to specified interval time Format Id Mac Address Logged in Users Type Number of logged in users Start Number End number Username User IP User MAC Interface Login time RxData count TxData count Type Dynamic Super User agreement No Authentication If the type of Logged in user is Super Subscriber Username will be eee If the build in account mode is disabled Username is Anonymous Proprietary Accounting Account Created When an account is created Account Activated When an account is activated Subscriber Trace When subscriber logout 142 A log would be sent if account were created Format Id Mac Address Account Create Type S N Username Unit Account usage time
101. osition your Wireless Subscriber Gateway 1 4 Outlook RS 232 hea se de LAN 3 LAN 4 T PWRSV Figure 1 1 Wireless Subscriber Gateway Outlook SMCWHSG14 G 9 1 4 1 Top Panel The top panel of the Wireless Subscriber Gateway is shown below SMC Networks Figure 1 2 Wireless Subscriber Gateway Top Panel 10 SMCWHSG14 G LEDs Indication of The Wireless Subscriber Gateway is not receiving electrical power Green The Wireless Subscriber Gateway is receiving electrical power Off Of The Wireless Subscriber Gateway status is defective The Wireless Subscriber Gateway status is complete Green Blinking During firmware upgrades this system LED will blink Off Of Port has not established any network connection Green lA port has established a valid 10 100Mbps network connection Green Blinking 10 100Mbps traffic is traversing the port Off Port has not established any network connection Green lA port has established a valid 10 100Mbps network connection Green Blinking 10 100Mbps traffic is traversing the port The Wireless is not ready The Wireless Subscriber Gateway has established a valid wireless G D D connection Green Blinking The Wireless connection is active 1 4 2 Rear Panel The rear panel of the Wireless Subscriber Gateway is shown below III RS 232 LAN 1 LAN 2 LAN 3 LAN 4 Figure 1 4 Wireless Subscriber Gateway Rear Panel SMCWHSG14 G 11
102. ou can type httpi4 1 1 d4into to open this window again without VPN connection Remaining Usage hh mm ss Ifyou don t want to continue using Internet please remember to logout Just click the Lagauf button Notice Ifyou are going to use VPM connection now please close the message window before you run PH connection Figure 3 105 Information Window Billing Type Time to Finish Can be replenished by subscriber Disable Information Window You can use Internet now This if an information window to show the usage and notice ou can type http 01 1 1 1finfo to open this window again without VPM connection Remaining Usage hh mm ss Ifyou don twantte continue using Internet please remember to logout Just click the Logout button Motice Ifyou are going to use VPN connection now please close the message window before you run WFH connection Replenish Figure 3 106 Information Window Billing Type Time to Finish Can be replenished by subscriber Enable SMCWHSG14 G 107 Information Window You can use Internet now This is an information window to show the usage and notice You can type http 1 1 1 1finfo to open this window again without VPM connection Remaining Usage hh mm ss Ifyou don twantto continue using Internet please remember to logout Just click the Logout button Motice If you are going to use VPN connection now please close the message window before you run VP connection Logout Fi
103. ount Generator Printer amp PC Connected Printer MM Use Button E for Discount Price Plan based on Button Presses Enable only valid for Three Button Printer Discount Price Plan based on Button Presses L Charge by levels Level Conditions Button Presses Unit Price 1 when gt 1 same as base charge 2 when gt Bo 3 when gt Fo 4 when gt Pp 5 when gt Pp Al E when gt pp 7 when gt po 8 when gt AE rs g when gt po 10 when gt fp Do Figure 3 65 Example 2 Amount 7 x 1 7 00 78 SMCWHSG14 G Below is an example of the account printout SMCWHSG14 G Welcome Username 2ds5ke24 Password 8e3zte33 Billing Time to Finish Service 1 hour Unit 7 Usage Time 07 00 00 Total 7 00 ESSID Wireless 2004 11 29 10 45 14 S N 000012 Please activate your account before 2004 11 29 22 45 14 Thank y you very muah Figure 3 66 Account Printout 79 Discount Price Plan based on Button Presses is enabled Charge by level is enabled Three Button Printer Web based Account Generator Panel Button A 01 30 minutes 30 minutes 1 00 Button B 0 4 1 hour 1 hours 2 00 Button 03 2 hours 2 hours 3 00 Print to Account Generator Printer YA O PC Connected Printer WA Button E for Discount Price Plan based on Button Presses only walid tor Three Button Printer Discount Price Plan based on
104. r 1 gt lt tr gt lt td align center width 100 bgColor W 10d7 colSpan 2 gt lt font size 2 gt lt b gt Welcome lt b gt lt font gt lt Ad gt lt Ar gt lt tr gt lt td align right width 35 bgColom eaeaea gt lt font color 000080 size 2 gt lt b gt Username lt b gt lt font gt lt td gt lt td width 65 gt lt input type text name username size 25 gt lt td gt lt Ar gt lt tr gt lt td align right width 35 bgColom eaeaea gt lt font color 000080 size 2 gt lt b gt Password lt b gt lt font gt lt td gt lt td width 65 gt lt input type password name password size 25 gt lt td gt lt tr gt lt tr gt lt td align center width 100 colspan 2 gt lt input type submit name apply value Enter style font family Arial gt lt input type reset name clear value Clear style font family Arial gt lt td gt lt tr gt lt table gt lt div gt lt form gt lt body gt lt html gt Figure 3 95 Redirect Login Page Code Screen SMCWHSG14 G 101 Advanced This function allow user to design login page of Wireless Subscriber Gateway Advanced Welcome Slogan Lo F Back d pls age Backgroun C Background Color FFFFFF View Color Grid Aricle Article Text Color faooooo View Color Grid None O FFFFFF View Color Grid Information Comments Figure 3 96 Advanced Login Pa
105. r account before 2004 1 1 27 03 55 42 Thank you very much Figure 3 59 Web based Account Generator Printout Time to Finish SMCWHSG14 G 73 Welcome Hotspot Internet Service Username Password Billing Service Unit Usage Time Total ESSID S N 000006 3m5k9r25 Tuezzas9 Time to Finish 30 minutes 1 0 30 00 1 00 Wireless 2004 11 26 15 57 25 Please activate your account before 2004 11 27 03 57 25 Thank you very much Figure 3 60 PC connected Printer Printout Time to Finish 74 SMCWHSG14 G Cinn 9 AA MM Lannan A AAA At MAWnALrA tar Divintraiit NAAN lAtiAn Un used account will be deleted after E hours automatically Expiration Accumulation account will be deleted after logged in 3 months 3 Printout Number of copies to print 17 Replenish l Can be replenished by subscriber Welcomel Lisernamensocooco Password annex Billing Accumulation service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 ESSID Wireless Wireless Disable 2004 7135 09 27 50 oM 000001 Flease start your account before 11014 3 f Please finish your usage time within 3 months after your first login Thank you very much Close Print SMCWHSG14 G 15 Welcome Hotspot Internet Service Username 0000000 Password 3OO000000 Billing Accumulation Service 30 minutes Unit 1 Usage Time 003000 Total 1 00 ESSID Wireless S N 000001 200441 1 29 10 09 34 Please activ
106. re 2004 11 27 03 3 7 06 Please finish your usage time within 3 months after your first login Thank you very much Figure 3 24 Example PC connected printer Printout Accumulation SMCWHSG14 G 41 Welcome Username o000000 Password 0000000 Billing Time to Finish Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 2005 2 1 10 29 49 S N 000001 Please activate your acc ount before 2005 2 1 22 29 49 Thank you very much Figure 3 25 Example Account Generator Printer Printout Time to Finish Welcomel Username 0000000 Passwordi0000000 Billing Accumulation Service 30 minutes Unit 1 Usage Time 0 30 00 Total 1 00 ESSID Wireless Wireless Disable 2004 7 15 09 27 50 S N 000001 Please start your account before 200417119 21 27 50 Please finish your usage time within 3 months after your first login Thank you very much Close Print Figure 3 26 Example Account Generator Printer Printout Accumulation SMCWHSG14 G Example Preview 1 Create accounts 2 Bill accounts Welcomel Welcome II A AAA niece ernieeciead ci Lisernamenocococa sername KHK Password KoE Password OOCK Usage Time Billing Time to Finish Total 100 00 200524 10 50 74 Please activate your ace Olt Berare oo W A 2003 2411 22 50 14 Thank you very much Thank you very much Press ENTER Press 001234 and ENTER Figure 3 27 Example Post paid Printo
107. rice list Under the limited lifetime warranty internal and external power supplies fans and cables are covered by a standard one year warranty from date of purchase SMCWHSG14 G Table of Contents As itis EEA E E AAE A E E EAEE EEE sve saideniuaneecuaset 4 TtT Package Contents una ai ll 4 UZ AA OTI 5 ES PI Ll el A dogs 5 A e o Cn ea atop aaa tae aaa aan ee atau adataa ene eh tebee eats 5 tassi TORA lt ae eee ee ee 6 e d 2 REAM PAM da oo 7 1 5 Technical Specification 8 EST Hardware Spec ad eco ad 8 1 5 2 Software opeciMca lO Sui ia 10 DIOSA A aaa 12 2 AARONI anillos aia 12 2 2 C nnec ng The ANICNNAS iras AAA A AS 13 2 3 Installation REGUIFEMENIS ds 13 2A NOTIN LAU dias ela aceite deus ra etait ade et sia WO a alae ba detect ala aint a S A A 15 220 POE Ap liC AOR o yl ac alec a o E 16 3 Configuring the Wireless Subscriber Gateway ccccceessseeeeeeeeeaeeeeeeeeeeeaaseeeeessenaaseeeeseanas 17 Od Seting VVIZAN Oe tcc ses cn eco aly achat a E E e es 17 dz r Advanced Selina le ea Ed decals alata Peale hath i a 41 E AE E LE 0 IA OO A ETA seantittdantas O TA TAEA AE deeeen saan daanen NA 42 322 WANILAN e E a A leas 45 32E OGIVO A cic rase ee aidi ana E E acid sigs lea ae dene tdanet ae 52 A so O sncctutustbucnedin un neelnsabutveadan tries Pinceses tebe 54 3 29 RADIOS Auth emul CAlOn ria seca det dca a neous 57 9 20 Bl na di do 60 32 ACCOUN ar sambaawentaoumcaan nants 66 22 O Cred A DN 79 AL K OV
108. rs This is your account information please keep this for your Internet Account Information Max 160 characters Your username is Username Max 80 characters Your password 1 Password Max 20 characters Y time 1 Usage Time awa Max 80 characters Please activate your account before Expiration Time Max 20 characters Format seid HH mm ss CAH S4h hh 12h AP hl J Use this account to LOGIN now Submit Button Max 40 characters a Preview of Successful Page Figure 3 126 Successful Page Setting Screen SMCWHSG14 G 121 Welcome Hot Spot Internet Service You may now use the Internet IMPORTANT Make a note of your username and password for logging in later This will be your only opportunity to do so Note Upper and lowercase letters This is your account information please keep this for your Internet Service Your username is WXY3dg54 Your password is 32JlKew2 Your usage time is 30 minutes Please activate your account before 2004 10 10 10 38 05 Email this webpage to myself Use this account to LOGIN now Figure 3 127 Example Successful Page Fail Page This function allow service provider to customize the message for the fail page Fail Page Customize the message for the fail page l SORRY Your cand could not be processed at this time Notification Message 1 Max 160 characters Please use your backspace button and try again with a different credi Noti
109. rver but also changes the SMTP header The recipient of your E mail sees the message as if you sent it from your local Internet Service Provide not form the hotel or other place Note Before setting this sever please make sure the e mail sever relay function is opened It must not exceed 50 characters Name ETT e port allowed range is 25 or 2500 to 2599 Apply Click Apply button to save the new settings SMCWHSG14 G 57 3 2 4 Authentication AUTHENTICATION Authentication Type No Authentication Built in Authentication C User Agreement Redirect URL Link Code Standard User Agreement Page WIFICO Moniy for RADIUS authentication Redirect Login Page D URL Masip C Behind NAT in case the device is installed SSL Port 443 behind NAT Virtual SSL port 0 Wandering Wi Fitonty for RADIUS authentication Redirect Login Page A URL coda Default deny Policy when Radius amp Server unreachable Allow access Deny access Current User Information Backup fi Min s c 1440 SSL Login Page Disable C Enable User Idle Time Out ls Min s ca 1440 Not function on Time to Finish billing mode Figure 3 43 Authentication Setting Screen tem Defaut Description Authentication Type No Option No Authentication Built in Authentication or User Authentication Agreement No Authentication Subscriber can direct access the Internet without enter u
110. s IP address or Domain name SMTP Port 25 Figure 3 11 E mail Service Setting Screen A e Email Server Redirect Disables or enables email server redirect function To prevent some subscriber s original Email server may protect by firewall or NAT network Wireless Subscriber Gateway provides an extra Email server parameter to forward the subscriber s Email The Wireless Subscriber Gateway not only forwards the subscribers E mail via other E mail server but also changes the SMTP header The recipient of your E mail sees the message as if you sent it from your local Internet Service Provide not form the hotel or other place Email Server s IP Before setting this field please make sure the E mail sever address or Domain name relay function is opened Enter the email server IP address or domain name The field must not exceed 50 characters SMTP Port 25 Enter the SMTP port The SMTP port allowed range is 25 or 2500 to 2599 30 SMCWHSG14 G Step 6 Authentication Service Setting 1 INTERNET Authentication Service 2 WIRELESS E MAIL Do you need to authenticate users AUTHENTICATION 5 BILLING 16 PRINTER E No The users can access the Internet without authentication Yes The users need to be authenticated before accessing the Internet 7 ACCOUNTING 8 SYSTEM Figure 3 12 Authentication Service Setting Screen tem Default Description Built in Authentication No Yes No Authenticatio
111. s been changed Figure 3 72 Success Dialog Box SMCWHSG14 G Please follow steps below to pay using credit card Step 1 Choose Credit Card service on the login page Welcome Hot Spot Internet Service Enter Cancel Select Credit Card Service or Click here to pay by credit card 4 Click VISA lt Click Figure 3 73 Login Page SMCWHSG14 G 87 Step 2 Select Service and enter payment information Welcome Hot Spotint Currency American Dollars Please choose from the following service selection Service Code Service Name Usage Time Charge O 1 30 minutes 30 minutes 1 00 C 2 1 hour 1 hours 2 00 3 2 hours 2 hours 3 00 How many units of Internet access would you like to purchase 1 Please kindly note that there will be no refund once connectivity is confirmed Please note that the time block of selected service is based on continuous usage Enter Payment Information all info is required call into is requires Credit card number Enter Email Address First Name as Last Name fe Address City Do O State Province E ZIP Postal Code i tsi i sS Country Po Phone Po Submit Transaction and Login Figure 3 74 Service amp Payment Information Setting Screen Authorize net tem Defauit Description Payment Information Credit card number Empty Enter your credit card number Credit card expiration date Empty Enter the credit card
112. sed accounting system Username account Password a Confirm Supervisor Account supervisor can only view system status and change password Username supervisor Password Confirm Super Subscriber Account Super subscriber is a built in subscriber account for system test or premium usage Super Subscriber Disable Idle Time Out 5 Mink 1440 Username super Password e Confirm Figure 3 177 System Account Setting Screen 166 SMCWHSG14 G lem epi O S Super Subscriber Disables or enables the super account function Idle Time Out The user idle time out valid is 1 to 1440 minutes lf the idle time out is set as 5 minutes it means if the account doesn t send packet in 5 minutes the account will logout automatically eo Administrator Account Step 1 Start your Web browser and enter the factory default IP address 192 168 2 1 in your browser s location box Press Enter Oe Jv htp192 168 2 1 Figure 3 178 Web Browser Location Field Factory Default Step 2 The Wireless Subscriber Gateway configuration main menu will appear Enter admin default as the Username and smcadmin default as the password and click Login If you are first time setting the system the wizard setup screen will appear SMC Networks SMCWHSG14 G Username admin Password smcadmin Username admin Password eoo o EE Version 1 00 01a Best View with Microsoft Int
113. sername and password 58 SMCWHSG14 G item Defaut Description Authentication Type No Built in Authentication Authentication Wireless Subscriber Gateway provides Built in Authentication for service provider to build up an Internet service without any extra authentication software If Built in Authentication is selected service provider can generate the subscriber account inside Wireless Subscriber Gateway and the system will authenticate the subscriber login according to the generated account User Agreement Subscriber must accept the service usage agreement before they can access the Internet WIFICOM Wireless Subscriber Gateway provides this Authentication for WIFICOM service provider to build up an Internet service with RADIUS server For the detail setup please contact WiFicom http www wificom com Wandering Wi Fi Wireless Subscriber Gateway provides this Authentication for Wandering Wi Fi service provider to build up an Internet service with RADIUS server For the detail setup please contact Wandering Wi Fi http wanderingwifi com Current User The system provides automatically backup account Information Backup information and unused account to flash ROM This function allow administrator to adjust the backup time The default value is 1 minute The Current User Information Backup valid range is 1 to 1440 Redirect Login Page Empty The input format can be http www yahoo com The URL ma
114. t Page Setting Screen User Agreement Fage Agree Do not agree Figure 3 132 User Agreement Page 124 SMCWHSG14 G 3 2 11 Pass Through This function allow administrator to set some special devices pass through the Wireless Subscriber Gateway system Because some network devices might be constructed under the Wireless Subscriber Gateway However these devices needn t be checked and authorized The Wireless Subscriber Gateway provides a pass through list and the administrator can control which devices can be pass through with authentication PASS THROUGH Pass Through Disable Pass Through Destination allows the subscribers ta access specified Internet websites without authentication which is useful to promote selected services Pass Through Subscriber is useful for VIP users without authentication Pass Through LAN device is also useful for devices that do not have a web browser cash registers for example or that are connected with LAN port wireless access points for example Please enter new pass through for destination cup to 50 entries uURLorwebste O Start End IP Address Please enter new pass through for subscribers or LAN devices up to 50 entries O Start End IP Address pm P Address Subnet Mask O MAC address Mask FF FF FF FF FF FF Pass Through List Delete All Figure 3 133 Pass through Setting Screen SMCWHSG14 G 125 Default Description Pass Through Enab
115. tachable diversity antenna with reverse SMA 12 SMCWHSG14 G LED Indicators One POWER LED One WAN 10 100M Link Activity LED Four LAN 10M 100M Link Activity LEDs One Wireless Link Activity LED One System LED Power Requirement External Power Adapter Input 100 240 VAC 50 60 Hz Output 5V 2A Environment Conditions Operating Temperature O to 50 C Storage Temperature 10 to 60 C Operating Humidity 10 80 non condensing Storage Humidity 10 to 90 non condensing Certifications FCC part 15 Class B CE CSA VCCI Class B CE R amp TTE C Tick Dimension Size 242 L x 130 5 W x 77 H mm Weight About 420g Net Mounting Desktop Wall mounted SMCWHSG14 G 13 1 5 2 Software Specifications Networking IEEE802 3 10BaseT Ethernet IEEE802 3u 100BaseT X Fast Ethernet IEEE802 3af Power over Ethernet IEEE802 11b Wireless LAN IEEE802 11g Wireless LAN Supports 100 Simultaneous Users IP Plug and Play iPnP HTTP Proxy Support SMTP Server Redirection DHCP Server DHCP Relay Static IP WAN Client DHCP WAN Client PPPoE WAN Client PPTP WAN Client NAT NTP Network Time Protocol Support DDNS Marketing Cooperation Advertisement URL link Walled garden Customizable log on and log off pages Portal Page WISPr Smart Client User Accounting and Authentication 14 Built in Authentication Web based Authentication RADIUS AAA Support RFC 2865 2866 Secondary RADIUS User Authentication and
116. ton to delete the logo file 104 SMCWHSG14 G CUSTOMIZATION Login Page Logo proa Account Printout Credit Card User aa This function allows to upload the customer s logo image file which can be shown on the standard login page and account printout of PC connected printer Fle Paths or OD Maximum file size is 60 kbytes and recommended dimension is about 200x50 pixels es SMC Networks Figure 3 101 Logo Setting Screen SMC Networks SMCWHSG14 G Username Version 1 00 01a Reset Figure 3 102 Login Page SMCWHSG14 G 105 e Information Window This function allow service provider can decide whether they want an Information Window pop up on subscriber PC when authenticate successful or not and specified text of information window Subscriber can type http 1 1 1 1 info to open the information window again or enter http 1 1 1 1 logout to logout immediately if accumulation billing selected CUSTOMIZATION Information User Agreement Login Page Logo Window Account Printout Credit Card Page Information window is a pop up window that is presented to subscribers with their browser once after subscriber login successfully The subscriber can type http 41 1 1 1finto to open this window again M Display Information Window once after a subscriber logs in successfully Redirect Information Window Type Popup M Allow to close the pop up window Information Window Conten
117. tout l l The system allows you to print all your bills This value is Number of copies to print 1 l number of copies Customize printout text This function allows you to produce custom bill based on your requirements want to setup the web based accounting now if exclusive printer cannot work Click I want to setup the web based accounting now if exclusive printer cannot work to open the Web based Account Generator Setting screen to start the web based accounting function SMCWHSG14 G 35 o Web based Account Generator Setting Account Generator Web based Account Generator Setting Button Billing Profile Button 011 30 minutes 30 minutes 1 00 setting Button B 02 1 hour 1 hours 2 00 Button E 03 2 hours 2 hours 3 00 Number of copies to print f Customize printout text Printout Please set your password for web based account generator Username account Password Contra Figure 3 18 Web based Account Generator Setting Screen Item Default Description o Billing Profile Button Define each button s billing profile Select one billing profile by clicking A C in the list box Printout Number of copies to 1 The system allows you to print all your bills Select one print number of copies by clicking in the list box Customize printout text This function allows you to produce custom bill based on your requirements Web based Account Username account Ent
118. tout Credit Card Page D Logo Only for PC connected printer Title Malcom Max 75 Username C E Password a Time To Finish Billing Time to Finish masas Accumulation Billing Accumulation Max 24 M Billing Profile Beics Max 24 M Purchase Unit bi Max 24 Usage Time Usage Time Max 24 M Price fa Max 24 Tax Tax Max 24 TOTAL Grand Total Max 24 M ESSID ESSID Max 24 WPA WPA Max 24 WEP WEP Max 24 Additional Label 1 Max 24 Yalue Max 24 FT Additional Label 2 Max 24 Value Max 24 M Print out Time Format yyyy mm dd HH mm ss HH 24h hh 12h t AMIPM Please activate your a account before Description he Max 24x3 Eine Format yyyy mm dd HH mm ss A 24h hh 12h AMP M Please finish your usage time within 3 months after your first Accumulation login El Max 24 4 M Billing Method Wireless Security Thank you very much M Ending E Max 24x10 Q Preview of PC connected printer Q Preview of account generator printer Q Preview of Post Paid Printout Apply Figure 3 112 Account Printout Customization Setting Screen 110 SMCWHSG14 G an Click Apply button to save the new settings Click Apply button the success dialog box appears Click on Back to return to Account Printout Customization setting screen Success The Configuration has been changed Figure 3 113
119. ts Window Mame Information Window Max 30 character Main message You can use Internet now hax 30 character Message Description This is an information window to shot mas 450 character standard for pre defined usage time Remaining Usage hax 30 character E Ses Post Paid Billing Connecting Usage hax 30 character O Warning Alarm message lif you dont want to continue using In ras 450 character Notice Text 1 Notice Max 150 character Notice Text 2 C Notice Message g lif you are going ta use VPN connect ghlas 150 character Notice Text 3 ax 150 character Preview Figure 3 103 Example Login Page Screen 106 SMCWHSG14 G Information Window Window N ame You can use Internet now Main Message This iz an information window to show the usage and notice You can type Messa ge De scriptio n http 041 1 1 1finto to open this window again without VPA connection 3 o Usage Count Label if you don t want to continue using Intemet please remember to logout Just click the Warning Alarm Message Logout button J E A i eee Notice Message if you are going to use VFN connection now please close the message window before ai wou run VPN connection Replenish Logout Figure 3 104 Example Login Page Screen Information Window You can use Internet now This is an information window to show the usage and notice Y
120. tton on the exclusive printer to create account and 3 E MAIL print out the account information without PC operating AUTHENTICATION Socket Port 1001 irae tee 5 BILLING Printer IP Address 192 168 2250 ACCOUNTING 8 SYSTEM No can use the PC web based browser to create account and print out the account information with PC connected printer c Back Figure 3 14 Printer Setting Screen SMCWHSG14 G 33 Button B Button A Button C lt I Figure 3 15 Account Generator Printer Step 9 Accounting Setting e Three buttons Printer Setting 1 INTERNET Account Generator 2 WIRELESS Three buttons Printer Setting 3 E MAIL 4 AUTHENTICATION Button Billing Profile 5 BILLING Button A 01 30 minutes 30 minutes 1 00 setting 6 PRINTER Button B 02 1 hour 1 hours 2 00 Y 7 ACCOUNTING Button C 03 2 hours 2 hours 3 00 z 8 SYSTEM Number of copies to print E Printout Customize printout text want to setup the web based accounting now if exclusive printer cannot work cD Figure 3 16 Accounting Setting Screen Three Buttons Printer 34 SMCWHSG14 G Name gt Charge Billing Profile 50 rinutes 0 minutes 1 OO Usage Time Button Button Figure 3 17 Billing Profile Setting Screen ltem Defaut Description Define each button s billing profile Select one billing profile Button A C 01 by clicking in the list box Prin
121. ug Play with any browser 1 1 Package Contents Please inspect your package The following items should be included SMCWHSG14 G e One Wireless Subscriber Gateway O Two antennas e One AC Power Adapter for Wireless Subscriber Gateway e One CD containing User s Manual and MIB file O Two screws for wall mount e One UTP Ethernet Fast Ethernet cable Cat 5 Twisted pair Optional Product AG 200E Account Generator Printer O One AC Power Adapter for mini account generator printer e One UTP Ethernet Fast Ethernet cable Cat 5 Twisted pair e One Account Generator Printer User s Guide If any of the above items are damaged or missing please contact your dealer immediately 8 SMCWHSG14 G 1 2 Features o Wireless data rates up to 54Mbps O Supports 100 Simultaneous Users e P Plug and Play iPnP e Comprehensive security 64 128 bit WEP encryption WPA encryption IP URL filtering e Intelligent Management e Built in AAA Authentication Accounting Authorization and Billing mechanism Note The PnP Function only can be used with TCPAP based Network 1 3 Precautions O Never remove or open the cover You may suffer serious injury if you touch these parts O Never install the system in the wet locations e Use only the original fitting AC power adapter otherwise there is a danger of severe electrical shock O Avoid exposing the Wireless Subscriber Gateway to direct sunlight or another heat source e Choose a well ventilated area to p
122. ure connection to a remote site or back end system with VPN PPTP Client If Secure Remote is enabled the RADIUS packet syslog will be transferred to this secure connection SECURE REMOTE Secure Remote Disable y Auto connect at Start up Always connect PPTP Server IP address Usemame Password Start connection VPN Tunnel Offline Client IP PPTP Client Status Figure 3 153 Secure Remote Setting Screen tem Default Description Auto connect at Disable Enable the check box to automatically establish the PPTP Start up Always connection connect address Enter the user name provided by your ISP The user name can consist of up to 80 alphanumeric characters and is case sensitive P Enter the user password provided by your ISP The password can consist of up to 80 alphanumeric characters and is case sensitive assword Empty Click on Start Stop connection button to start stop PPTP ota connection connection refresh Click on refresh button to update the status VPN Tunnel Display the status Client IP Display the IP address SMCWHSG14 G 147 3 2 23 SNMP The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol If you are not familiar with SNMP please consult your Network Administrator or consult SNMP reference material You must first enable SNMP on the SNMP Agent Configuration screen SNMP SHMP Disable SNMP
123. ut SMCWHSG14 G 43 Step 10 System Setting 1 INTERNET System Setting 2 WIRELESS 3 E MAIL Username admin 4 AUTHENTICATION BILLING Password o Confirm 6 PRINTER System date and time Get from my Computer 7 ACCOUNTING Date 2004 11 26 Time 15 43 43 Please be sure to change your password Secure Administrator IP Address Al Selected Figure 3 28 System Setting Screen Item Default Description Oooo o Username admin Enter the user name The user name can consist of up to 80 alphanumeric characters and is case sensitive Password admin Enter the user password The password can consist of up to 80 alphanumeric characters and is case sensitive Empty Enter the password of administrator for confirmation System date and time YYYY MM DD Get from my Computer HH MM SS Click Get from my Computer button to correct the system date and time Secure Administrator IP All This function allows remote user to management the Address device You can specify one or any IP addresses for remote control the system FINISH Click the button to save the settings then the system will restart 44 SMCWHSG14 G 3 2 Advanced Setup The Advanced Setting enables you to configure advanced settings related to accessing the Internet including 1 System WAN LAN Server Authentication RADIUS Billing Accounting Credit Card Keypad Sey 2 Bl gt 2 wN O Customization
124. utton of keep alive The Max Idle Time maximum value is 65535 minutes Keep alive and Redial Period Keep alive Disable This option keeps your PPTP enabled Internet access connected indefinitely even when it sits idle The Redial Redial Period 30 Seconds Period maximum value is 65535 seconds 99 3 2 3 Server SERVER O HTTP Port 80 0 800 Web Server OHTTPS Port 443 443 4420 4440 Administrator Idle Timeout 5 Min s 1 1440 DHCP Disable DHCP Relay DHCP Server IP Address DHCP Server DHCP Server IP Pool Starting Address Pool Size Lease Time Primary DNS Server 1192 168 2 1 253 mex 2s2 300 Minutes 168 95 1 1 Secondary DNS Server IP Address or Domain Name Email Server Redirect SMTP Port 25 25 2500 2599 Figure 3 42 Server Setting Screen ltem Default Description Web Server Enter the HTTP port number The HTTP port allowed range is 80 or 8010 to 8060 For access the Wireless HTTP Port Subscriber Gateway system under NAT please tab the http HTTP Port IP Address Port Number Enter the HTTPS port number The HTTPS port allowed range is 443 or 4430 to 4440 For access the Wireless HTTPS Port 443 Subscriber Gateway system please tab the https HTTPS Port IP Address Port Number The idle time out valid range is 1 1440 If the idle time out is set as 5 minutes it means if the administrator doesn
125. vided the account Generator Panel homepage will appear Account Generator Panel Please choose one button from the following selections Logout Wei Account List Figure 3 183 Account Generator Panel SMCWHSG14 G 169 e Supervisor Account Step 1 Start your Web browser and enter the factory default IP address 192 168 2 1 in your browser s location box Press Enter Oe http 192 168 2 1 Figure 3 184 Web Browser Location Field Factory Default Step 2 The Wireless Subscriber Gateway configuration main menu will appear Enter supervisor as the Username and supervisor as the password and click Login SMCWHSG14 G Username supervisor Password supervisor Username supervisor Password seeseseseene Version 1 00 01a Figure 3 185 Supervisor Account Login Screen Step 3 After a valid user name and password have been provided the Wireless Subscriber Gateway configuration homepage will appear SMC Networks WIZARD SETUP ADVANCED SETUP SYSTEM STATUS SYSTEM TOOLS syste isa bte System l l l System Host Name Firmware Version 1 07 06 Location Name Domain Name System Time 2004 7 2 16 08 58 System Up Time 00D 00H 01M 11S WAN MAC address 00 90 0E 00 60 C1 LAN MAC address 00 90 0E 00 60 C0 Network WAN Status Not Established WAN Type DHCP Client WAN IP Address None LAN IP Address 192 168 2 1 WAN Subnet Mask None LAN Subnet Mask 255 0
126. when gt pp O F when gt po A B when gt p g when gt p e 10 when gt pp CE Figure 3 54 Accounting Setting Screen 70 SMCWHSG14 G Urrused account will be deleted after 12 hours automatically 1 20 Expiration Accumulation account will be deleted after logged in E months 1630 Printout Number of copies to print 1 7 Replenish l Can be replenished by subscriber Figure 3 55 tem Defautt Description Expiration Un used account will be 12 hours Enter the number of hours minutes days The field maximum deleted after hours value is 30 hours minutes days automatically Accumulation account 3 months Enter the number and select time unit from list box The field will be deleted after maximum value is 30 month days hours logged in Printout Number of copies to print 1 The system allows you to print all your bills Select one number of copies by clicking in the list box Can be replenished by Enable Click the check box to enable the replenish function subscriber SMCWHSG14 G 71 0 Min 10 Min 20 Min s 30Min s 40Min s 50Min s 60Min s 70Min s Account Subscriber Create Login Buy 30 minutes Subscriber HotSpot Operator Subscriber Jo Account print out Pay the money to Hotspot Operator al Buy 30 minutes Account print out Pay the money to Hotspot Operator Subscriber Hotspot Operator HotSpot Operator Figure 3 5
127. word input Top Frame is allowed to be specified a URL to link Top Frame Bottom Frame This frame will show the standard login page Frame Figure 3 98 Frame Login Page Setting Screen ltem Default scription Top Frame URL Link Empty The input format can be http www yahoo com The maximum character of the URL Link is 200 Bottom Frame lrhis frame will show the standard login page SMCWHSG14 G 103 C SAR PARK PANAMA TOP Frame English Espa ol Welcome Username Password Enter Cancel Bottom Frame Copyright 0 2001 2002 All Rights Reserved Figure 3 99 Example Login Page Screen Logo This function allows service provider to upload the customer s logo image file which can be shown on the standard login page and account printout of PC connected printer CUSTOMIZATION E Information a User Agreement Login Page Logo Window Account Printout Credit Card Page This function allows to upload the customer s logo image file which can be shown on the standard login page and account printout of PC connected printer File Path E Browse Apply Maximum file size is 60 kbytes and recommended dimension is about 200x50 pixels No logo file Figure 3 100 Logo Setting Screen item Default Description File Path Empty Enter the file pathname of the logo file in the File Path field E Click Apply button to save the logo file to system De Click Delete but
128. ximum character of the URL Link is 200 Code Copy and paste the following HTML Code into your home page to produce Code redirect subscriber login page SMCWHSG14 G 59 Copy and paste the following HTML Code into your home page to produce user agreement login page Redirect Page Sample Code lt html gt lt body gt lt center gt lt table width 100 border 0 gt lt tr gt lt td align right width 45 gt lt form method post action http 4 1 1 1 1 agree cgi name agree gt lt input type submit name agree value Agree gt lt form gt lt td gt lt td width 10 gt amp nbsp lt td gt lt td width 45 gt lt form method post action http 1 1 1 1 disagree cgi name disagree gt lt input type submit name disagree value Do not agree gt lt form gt lt td gt lt tr gt lt table gt lt center gt lt bod y gt lt html gt Figure 3 44 Preview Redirect Login Page Code item Defaut Description SSL Login Page Enables or disables SSL security of login page User Idle Time Out 5 Minutes The user idle time out valid range is 1 1440 ED Click Apply button to save the new settings 60 SMCWHSG14 G 3 2 5 RADIUS Authentication RADIUS Disable C Enable Time to Finish The subscriber can access Internet only one time with one account Once subscriber login the pre defined usage time will start until run out even the subscriber stop
129. y open to attack from an intruder who calculates the WEP key by comparing the unencrypted and encrypted text strings Because of this weakness shared key authentication can be less secure than open authentication Both With this setting wireless stations can communicate with or without data encryption Click Apply button to save the new settings SMCWHSG14 G 153 Click Apply button the restart dialog box appears Click on Apply to restart the system RESTART Do you want to restart the system Figure 3 156 Restart Dialog Box This operation will load the default manufacturer configuration to the system All this page Wireless configuration setup will be replaced by default settings 3 2 25 Account Generator ACCOUNT GENERATOR Account Generator Enable Disable CO Enable secret Key max characters SS UN Ethernet Thermal Printer IP Address Figure 3 157 Account Generator Printer Setting Screen 154 SMCWHSG14 G ROOM 801 RESTAURANT Control Center 2 Or Ethernet Cable Figure 3 158 Application 3 3 System Status Display Wireless Subscriber Gateway system basic status including 1 System 2 Account List e SYSTEM 3 Account Log gt ACCOUNT LIST 4 Current User b ACCOUNT LOG 5 DHCP Clients b CURRENT USER 6 Session List 7 LAN Devices e DHCP CLIENTS E SESSION LIST e LAN DEVICES Figure 3 159 System Status Item Screen SMCWHSG14 G 155 3 3 1 System
130. zed Billing Address ZIP code Empty Enter the ZIP code SMCWHSG14 G 89 Step 3 After valid payment information has been provided the subscriber will obtain one valid account to login or the Figure 3 78 screen will appear Hot Spot Internet Service You may now use the Internet IMPORTANT Make a note of your username and password for logging in later This will be your only opportunity to do so Note upper and lowercase letters This is your account information please keep this for your Internet Service Your username is u92tf237 Your passwordis vk544d77 Your usage time is 00 30 00 Please activate your account before 2004 08 10 10 30 28 Email this webpage to myself Use this account to LOGIN now Figure 3 76 User Account Information Welcome Hot Spot Internet Service Credit Card Number Fail SORRY your card could not be processed at this time Please use your backspace button and try again with a different credit card Thank you Try Again Clase Welcome Hot Spot Internet Service Transactions of this market type cannot be processed on this system SORRY your card could not be processed at this time Please use your backspace button and try again with a different credit card Thank you Try Again Close Figure 3 77 90 SMCWHSG14 G 3 2 9 Keypad KEYPAD The Keypad is the optional external PS 2 numeric keypad which is connected with exclusive printer

Download Pdf Manuals

Related Search

Related Contents

299.6 KB  SONIN DIGITAL MOISTURE METER 270 OPERATING MANUAL  Descargar Ulead VideoStudio 9 2  Life Fitness 93Ti User's Manual  ODYS PRIME - Billiger.de  Manual de instruções - VEGACAP 65  Manual de Usuario  fds - liquide fumee - gamme eurosmoke fog  Operating instructions  Right-click to as a * file  

Copyright © All rights reserved.

• https://telegra.ph/Calculat-Wire-Area-From-Voltage-Drop-3346087b-11-16
• https://telegra.ph/AC-Single-phase-Voltage-Drop-Calculator-12007dc2-11-16
• https://telegra.ph/Calculate-Wire-Resistor-from-Voltage-Drop-123b4243-11-16
• https://telegra.ph/1-2-4-Concrete-Mix-Calculator-c31c4df9-11-17
• https://telegra.ph/1-4-8-Concrete-Mix-Calculator-b9d28f55-11-13
• https://telegra.ph/Wall-Concrete-Volume-Calculator-6075dc78-11-13
• https://telegra.ph/square-bar-weight-calculator-c8761b9e-11-07
• https://telegra.ph/Calculate-Wire-Resistor-from-Voltage-Drop-07d405cc-11-18
• https://telegra.ph/Calculat-Wire-Area-From-Voltage-Drop-e058c820-11-18
• https://telegra.ph/AC-Single-phase-Voltage-Drop-Calculator-2c9e4976-11-18