"Ar - WeShipIt
Contents
1. 2 Keep it or use it in moist environment for long 3 Us it in rainfalls o rin water 4 Deliver or use it in strongly shocking environment Thank you for choosing the series of products designed and produced by our company hope that our products can bring you happiness and long lasting memory2. Meanwhile the red light keeps shining and the blue light flashes In the USB mode press the START PHOTOGRAPH and shift to the PC Camera function Meanwhile both the the red light and the blue light keep shining 3 Other Notes 3 1 Precautions 1 For the convenience of transportation and usage this product adopts AA battery which can not be recharged 2 This product supports hot plug TF card However TF card plugging can damage the video files and even damage the memory So try to avoid pluggingthe memory card during card the video recording process D 3 When in the poor light environment try to move the machine stably and smoothly otherwise smearing and blurring can happen 4 After use please remove the battery 5 Do not use the telescope to watch the sun or youeyes can be hurt Be sure to keep it in mind 3 2 Troubleshooting 1 Question If the machine crashes how can I reset it Answer Take out one battery and re fit it in three seconds then it is settled 2 Question If long time pressing theSTART PHOTOGRAPH button the machine does not start up what should I do Answer Check whether the positive and negative terminals of the batteries are correctly placed or the battery is out of power 3 3 Protection for the telescope Digital telescope is a high precision optical instrument so in order to avoid damage please avoid the following practice 1 Use the telescope in ultra high or ultra low temperature
3. Digital Telescope User Manual Contents Introduction 2 1 1 System requirements 2 1 2 Suite specification 2 1 3 Digital telescope introduction 2 1 4 Relevant parameters 3 Functional operation 3 Othernotes re 5 3 1 Precautions gt 5 3 2 Troubleshooting 6 3 3 Digital telescope protection 6 1 Introduction Name digital telescope Specification DT08 Place of origin Shenzhen City Guangdong Province China Function Digital Telescope Telescope Video Camera Digital Camera Long Focal Length Camera TF Card Reader 1 1 System requirements Win98SE 2000 WinMe XP Vista Win 7 Computer hardware requirements 1 Pentium of more than 233MHz 2 Memory of 128MB 3 Graphics card with a memory of more than 2MB 16 bit high color display 4 USB interface L 5 Hard disk space of more than 600 MB 1 2 Suite Description l Digital telescope 2 USB cable 3 Specification 4 Lens cloth 5 AA rechargeable battery options 6 AA battery charger options 7 Memory card options 1 3 Digital telescope introduction 1 START PHOTOGRAPH button P10 2 VIDEO button PI 3 Camera optical lens P1 P2 4 Telescope viewfinder P2 5 Battery cover P2 1 4 Relevant parameters l Magnification 10 times 2 Objective lens diameter 25mm 3 Field of view 101 m 1000 m 4 Telescope focus range 3 m to infinity 5 Focus range cameras F
4. ixed 50 m to infinity 6 Sensor Type CMOS 7 Effective pixels 1 3 million 8 File format photo video audio JPEG MPEG AVI 16bit PC 9 Photo file size resolution 1280 960 10 Video resolution frame 640x480 30fps 11 Memory Expansion TF card up to 32G 12 Mobile storage USB2 0 interface widows xp and the above free driver 13 Video output PC camera windows xp and the above free driver 14 Power source two AA batteries alkaline lithium battery NiMH battery 2 Functional operation 1 Starting up Keep pressing the START PHOTOGRAPH button to start Ta and the red light shines then the TF card is detected and the red right flashes once when the detection succeeds so it is in the standby status In this status the red light and blue light flash alternately with acycle of 2 seconds If the detection of TF card fails the red light shines continuously and when the blue light flashes 8 times it shut down if there is not enough remaining space in the TF card the red light will keep shining and the blue light will flash 8 times then it shuts down 2 Video recording function In standby status press the VIDEO button for a short time this product will start video recording During the recording process the blue light flash and the red light will turn off repress the VIDEO button for a short time to stop recording and the blue light turns off so it is back to the standby status In the rec
5. ording status press the START CAMERA button for a short time this product will save the video files Whenever it takes a photograph the blue light and the red light will shine simultaneously and the product will turn to the standby status In the status of recording if the TF card does not have enough remaining space the red light will keep shining and the blue light will fleetingly flash 8 times then the product turns power off 3 Function of photographing In the standby status press the START PHOTOGRAPH button for a short time this product will take a photograph and the blue light and right light will flash once simultaneously then this product will turn to the standby status 4 Power off S When it is power on keep pressing the START PHOTOGRAPH button if it is recording a video the video file will be saved and the blue light and the red light will flash five times simultaneously then this product will shut down when in the standby status if there is no operation for five minutes this product will shut down automatically the blue light and the red light flash simultaneously five times and the product shuts down 5 Low battery voltage When in the power on status if the battery voltage is too low the blue light will keep shining and the red light will flash eight times then the product shut down 6 Instructions for connecting the computer When connected to the computer it will enter the USB mode automatically
Download Pdf Manuals
Related Search