Home

Model 365510 Digital Stopwatch

1. Press MODE to save alarm setting and to return to time display To enable the Alarm follow the instructions in step 3 of the Normal Mode section Note that the Alarm time setting will reflect the AM PM or H mode programmed above in the SETTING DATE AND TIME section ooh ALARM SNOOZE and ALARM SILENCE When the alarm sounds press START STOP A 5 minute snooze period will begin To silence the alarm without snooze press SPLIT RESET after the alarm sounds HOUR CHIME stop watch beeps once every hour on the hour To set the Hour Chime ON press and hold SPLIT RESET then press MODE while continuing to hold SPLIT RESET until the days of the week appear on the top of the LCD To turn Hour Chime OFF press MODE while continuing to hold the SPLIT RESET button until the days of the week switch OFF Battery Replacement This Stopwatch uses an LR 44 or A 76 alkaline button battery The Phillips head screws on the rear of the watch must be removed to open the watch and access the battery It is recommended that a qualified technician replace battery Battery life is typically one year Calibration Services Extech offers repair and calibration services for the products we sell Extech also provides NIST certification for most products Call the Customer Service Department for information on calibration services available for this product Extech recommends that annual calibrations be performed to verify meter performance and accu
2. USER GUIDE EXTECH INSTRUMENTS SPLIT RESET MODE START STOP Ba Model 365510 Digital Stopwatch DISPLAY Alarm Bel Introduction Congratulations on your purchase of the Extech 365510 Digital Stopwatch with Split Time Two Competitor monitoring Alarm and Clock features The accuracy of the clock is 3 seconds per 24 hours Careful use of this stopwatch will provide years of reliable service Operation NORMAL MODE 1 In Normal Mode the Hours Minutes Seconds and the day of week is displayed 2 Press and hold the SPLIT RESET button to view the Alarm Time 3 To turn the Alarm ON or OFF press the START STOP button while holding down the SPLIT RESET button the bell icon in the upper right hand corner of the display is on when the Alarm is turned ON 4 Press and hold START STOP to view the calendar month and date STOP WATCH MODE To access press the MODE button once from Normal Mode When the Stopwatch Mode is first accessed the SU FR SA icons will flash A Elapsed Timer 1 Press Start Stop to Start SU SA icons flash 2 Press Start Stop to Stop SU FR SA icons flash 3 Press Start Stop Restart 4 Press Start Stop to Stop 5 Press Split Reset to reset the display Press MODE to return to Normal Mode B Split Time 1 Press Start Stop to Start SU SA icons flash 2 Press Split Reset to Split SU TH SA icons flash 3 Press Split Reset to release Split SU SA icons flash 4 Press Start Stop to S
3. racy Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment a six month limited warranty applies on sensors and cables If it should become necessary to return the instrument for service during or beyond the warranty period contact the Customer Service Department at 781 890 7440 ext 210 for authorization A Return Authorization RA number must be issued before any product is returned to Extech The sender is responsible for shipping charges freight insurance and proper packaging to prevent damage in transit This warranty does not apply to defects resulting from action of the user such as misuse improper wiring operation outside of specification improper maintenance or repair or unauthorized modification Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct indirect incidental or consequential damages Extech s total liability is limited to repair or replacement of the product The warranty set forth above is inclusive and no other warranty whether written or oral is expressed or implied Copyright 2003 Extech Instruments Corporation All rights reserved including the right of reproduction in whole or in part in any form
4. top SU FR SA icons flash 5 Press Split Reset to reset the display Press MODE to return to Normal Mode C Two Competitor Timer Press Start Stop to Start SU SA icons flash Press Split Reset to Split SU TH SA icons flash Press Start Stop to Stop SU TH FR SA icons flash Press Split Reset to release Split SU FR SA icons flash Press Split Reset to reset the display Press MODE to return to Normal Mode NOTE Press all three buttons simultaneously to reset to the Elapsed Timer mode akon Model 365510 Version 2 2 10 07 SETTTING DATE AND TIME To access press MODE button 3 times from Normal Mode Press SPLIT RESET to scroll through the programmable digits fields The flashing digit is the digit that is ready to be edited Use the START STOP button to edit the flashing digit When setting the hours minutes and seconds you can press START STOP to reset the selected digit to zero press and hold it down to quickly scroll The hour digits will scroll through A for AM P for PM and H for 24 hour clock Press MODE to return to normal operation ALARM SET To access press MODE twice from the Normal Mode 1 Once ALARM SET mode is accessed the hour indicator and MO icon will flash 2 Press STOP START to change the hour This step also activates the alarm and displays the alarm indicator icon bell in upper right hand corner of LCD display Press SPLIT RESET to select minutes Press STOP START to advance the minutes

Model 365510 Digital Stopwatch

Contents

Download Pdf Manuals

Related Search

Related Contents