Home

User Manual

1. System Record and Help 4 1 System option 4 1 1 Click System button enters the Setting menu EasyF eather Record Help Setting Alarm MaxMin RA _henguaee 10263 hy Absolute Pressure Current Max 1000 6hpa 1020 0 hy 17 Sett ing Time Zone Interval Unit Pressure Indoor Temperature Pressure Relative Pressure Outdoor Temperature Wind Rainfall Absolute Pressure Display Format Date Time Axes Outdoor Temperature Pressure Wind Rainfall Absolute Pressure Wind Speed ka Hour Rainfall w This section is used to set up PC software display display console units Once you made your choice press Save to make the setting effective 4 1 2 Click Alarm button enters the Alarm menu C SelectAll Indoor Humidity Fiil Alarm F 0 00 Outdoor Humidity Wind Direction Indoor Temperature Wind Speed Outdoor Temperature DewPoint C WindChill l Relative Pressure O Hour Rainfall b b AA B b b Absolute Pressure 24 Hour Rainfall This section is used to set the desired time high or low alarm value for the base unit as well as able or disable the corresponding alarm function Once you made your choice choose Save to make the setting effective If you don t want to make any change just press Cancel and exit without change 18 4 1 3 Click Max Min button enters the Max Min menu S Har Hin Indoor Humidity Wind S
2. hax hlin 1009 7 hpa 1026 3 hpa 999 2 hp Absolute Pressure Current hax hlin 4 3 1 Click About EasyWeather button enters the About menu About Easyfeather EasyWWeather 7 0 Ver Copyright C 2013 22 Special Notes about time synchronization between PC and display console The PC software obtained its own time scale through the time interval marker from the display console history data and the PC software automatically synchronizes the weather data with a time stamp calculated Thus the history data file can have different time when the PC time and display console time is not same In order to make the time scale correct remember to set the PC time and display console time same and further to this no weather data is allowed to be missed or over written If history weather memory on the display console is cleared by manual setting then the history weather data since last uploading is lost permanently Before memory is used up memory icon on LCD display showing 100 full remember to upload weather history data to PC periodically If there is a reset happened for the rain fall on the display console then there will be rain fall value discrepancy between PC and display console Legal Notes e We reserve the right to delete or change any image whether or not purposely uploaded onto the server by a user of the TP1080WC and the EasyWeather software products e The EasyWeather software products are protected by copyright
3. PRESSURE section H button and H button will be flashing Touch the button or H button to Shift the display between Absolute pressure and Relative pressure 2 Touch the PRESSURE section again button and H button will be flashing Touch the 4 button or H button to Shift the display unit between hPa inHg and mmHg 3 Touch the PRESSURE section the third time to set the Relative Pressure value The Hand H button will be flashing rel icon will light up Touch thel button or H button to change the value hold thel button or H button for 3s to change the number in great step 4 Touch the PRESSURE section the forth time to set the pressure high alarm function the and H button will be flashing HI AL icon will light up Touch thel button or H button to change the value hold thels button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 10 5 Touch the PRESSURE section the fifth time to set the pressure low alarm function the and H button will be flashing LO AL icon will light up Touch thel button or H button to change the value hold thels button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 6 Touch the PRESSURE se
4. This section is used to display recorded history data in a spread sheet If you wanted to see all history data in a desired time period choose the time duration and press Search to reload the history data With the Export button you can export the selected history data into excel format file for other application purpose When memory on display console is full press Clear Memory button to refresh the memory space on the display console remember to upload all data before pressing this button If you wanted to start a new weather history record press Clear Data button to clear up the data base all history weather data will be deleted Cif you would like to keep a back up history file before deleting all weather data you can make a copy of the EasyWeather mdb file into another folder or just rename the EasyWeather mdb file such as Jan 07 dat for future reference 4 2 2 Click Graph button enters the Graph menu Start Time 2013 8 2 i 16 59 37 E End Time 2013 8 30 17 59 37 950 2013 08 03 00 00 00 2013 08 10 00 00 00 2013 08 17 00 00 00 2013 08 24 00 00 00 In this section you can see the history data plotted in graph format for easier observation If you want to see more details just use your mouse to select the area you wanted and the display will be automatically updated in more detailed scale 20 Seles Start Time 20 13 2 3 YA a ma Search Expor
5. is detected in the initial setup the transmitter will try once every hour to get an RCC signal until a signal is received Once the transmitter receives the RCC signal it will transmit the signal to the monitor On the monitor the RCC icon will be displayed if the monitor doesn t receive the RCC signal or loses the signal the RCC icon will not be display Note Wait two minutes before re insert the batteries of transmitter for proper reset Note The best condition for reception is at night between midnight and 6 00am when there is less atmospheric interference Positioning Once you have verified that all of the components of the weather station are working they can be positioned in their permanent places Before permanently mounting make sure that all components work properly together at their chosen mounting or standing locations If e g there appear to be problems with the 915 MHz radio transmission they can mostly be overcome by moving the mounting locations Note Commonly the radio communication between receiver and transmitter in the open field can reach a distance of up to 330 feet providing that there are no interfering obstacles such as buildings trees vehicles high voltage lines etc Radio interferences such as PC screens radios or TV sets can in bad cases entirely cut off radio communication Please take this into consideration when choosing standing or mounting locations Setting Up Note Because of the default
6. settings already determined by the manufacturer it may not be necessary for the majority of users to perform except the Relative Air Pressure see further down any further basic settings Changes however can be easily made For basic settings the following menu is started by touching the Touch Screen in the desired display area The basic settings can now be performed in the following successive order Note setting procedure can be exited at any time by touching any other function area except or ON OFF indoor temperature weee E jus 50 TENDENCY Activate the indoor temperature related setting by 1 Touch the INDOOR TEMPERATURE section lH button and H button will be flashing Touch the button or H button to Shift the display unit between C and F 2 Touch the INDOOR TEMPERATURE section again to set the indoor temperature high alarm function the r and H button will be flashing HI AL icon will light up Touch thela button or H button to change the value hold thel button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 3 Touch the INDOOR TEMPERATURE section the third time to set the indoor temperature low alarm function the and H button will be flashing LO AL icon will light up Touch thel button or H button to change the valu
7. the capacity of the PC s main memory PC software installation The installation of TP1080WC software is very simple double click the setup exe file and follow the steps popped up Make sure you are running the program under the administrator account of your windows PC platform Otherwise the graphic function might not be working when graph display mode is needed to display all history data If you run the program for the first time the current weather display will be displayed and at the sub line of the window the program will show related information regarding the read of all history data into the PC Please note however when there is large amount of data is being uploaded it will take a few minutes time before the system can respond to your setup settings Otherwise it will display read weather data fail error message since the USB port is reading the data from the memory and the system is not able to respond any further job tasks P MIJU Cy P NAULI P YA EasyWeather System Record Help Pressure Relative Pressure Current Max hpa JI hpa Absolute Pressure Current Max hpa hpa Indoor amp Outdoor Indoor Temperature Current Max C i C Indoor Humidity Current Max Outdoor Temperature Current Max C C Outdoor Humidity Current Max DewPoint a
8. time button and H button will be flashing Touch the button or H button to set the month Hold thel button or H button for 3s to change the number in great step 5 Touch the DATE section the fifth time button and H button will be flashing Touch the button or H button to set the day Hold thels button or H button for 3s to change the number in great step 6 Touch the DATE section the sixth time button and H button will be flashing Touch the button or H button to set the alarm hour Hold thek button or H button for 3s to change the number in great step 7 Touch the DATE section the seventh time l button and H button will be flashing Touch the button or H button to set alarm minute Hold thels button or H button for 3s to change the number in great step Touch ON OFF to enable or disable time alarm function Memory 1 Touch Memory section to activate history data toggle display l button and H button will be flashing Press to toggle forward to see earlier weather history data together time stamp press to see later history weather data When history data displayed the corresponding time will be displayed at the time section area History data saving interval can only be changed using the PC software that comes with this product the default history data saving time interval is preset to 30 minutes prior to shipment 2 Touch Memory section again will trigger the memory clear procedure the word of CLEAR
9. will be flashing the full memory usage icon will be flashing Press and hold the memory full icon for 3 seconds will clear the memory PC Connection As an important feature in addition to the display on the Touch Screen the Weather Station allows the read out of all measured and displayed time and weather data in form of complete history data sets on a PC Data Storage For a comprehensive weather history the Display Console allows the internal storage of up to 4080 complete sets of weather data with time and date The base station will loose all weather data if an interruption of power supply In case the memory capacity of the Display Console is exhausted the oldest data sets stored will be overwritten by the new ones entered Data Recall Certain weather data or setting values can only be read out processed and displayed by means of a PC Also the settings of the storing intervals from 5 minutes to 240 minutes for the storage of data sets can only be performed by means of a PC Connections and Software The wiring between Display Console and PC takes place by means of an included USB cable The EasyWeather software package also included in the shipping contents must be installed on the PC This software allows the display of all present weather data with graphic symbols It also allows the display storage and printing of history data sets whose volume exceeding the maximum 4080 data sets of the Display Console is only limited by
10. Graph Current Max 1006 9 hpa 1026 3 hpa Absolute Pressure Current bax 1000 6 hpa 1020 0 hpa Iindanr Matini 19 4 2 1 Click History button enters the History menu amp History StartTime 2013 8 5 17 25 52 ee EndTime 2013 8 29 18 25 52 NO Time Interval Indoor Temperature Indoor Humidity Outdoor Temperatur Outdoor Humidity Relative Pressu 2013 8 5 17 27 42 30 28 6 54 1012 5 2013 8 5 17 57 42 30 28 7 56 1012 2 2013 8 5 18 27 42 30 28 8 55 1011 9 2013 8 5 18 57 42 30 28 8 55 1011 9 2013 8 5 19 27 42 30 28 8 56 1011 8 2013 8 5 19 57 42 30 28 9 55 1011 9 2013 8 5 20 27 42 30 29 0 58 1012 1 2013 8 5 20 57 42 30 29 0 59 1012 2 2013 8 5 21 27 42 30 23 0 55 1012 5 2013 8 5 21 57 42 28 9 55 1012 8 2013 8 5 22 27 42 28 7 55 1013 0 2013 8 5 22 57 42 28 6 56 1013 3 2013 8 5 23 27 42 28 5 57 1013 5 2013 8 5 23 57 42 28 4 58 1013 6 2013 8 6 0 27 42 28 5 58 am 1013 6 2013 8 6 0 57 42 28 7 59 _ 1013 6 2013 8 6 1 27 42 28 9 60 1013 5 2013 8 6 1 57 42 3 29 0 1013 2 2013 8 6 2 27 42 29 3 1012 9 2013 8 6 2 57 42 29 5 1012 7 2013 8 6 3 27 42 29 6 1012 5 2013 8 6 3 57 42 29 7 6 1012 4 2013 8 6 4 27 42 29 8 1012 5 2013 8 6 4 57 42 29 9 1012 8 DEE EE E A oe zj 1 2 3 4 5 6 7 8 9
11. Help Pressure Relative Pressure Current Max hpa Pt E hpa Absolute Pressure Current Max hpa hpa Indoor amp Outdoor Indoor Temperature Current Max C a Indoor Humidity Current _ Max L _ Outdoor Temperature Current Max ee Kuu Outdoor Humidity Current Max 9 DewPoint amp WindChill DewPoint Current ee WindChill Current Wind Wind Speed Current m s Gust Current m s Rainfall Hour Rainfall Current mm 24 Hour Rainfall Current mm Week Rainfall Current mm Month Rainfall Current mm Total Rainfall Current mm Ga USB Unconnected All the settings from the display console is mirrored into the PC software so once you have done your setting on the display console then you don t need to make any setting changes on the PC software However you can still easily make any setting changes you wanted from the PC and download the changes into the display console the setting changes will be refreshed after 1 minute When display console is connected to PC it shows USB Connected at the bottom of screen If no display console is connected it shows USB Unconnected Tool Bar The tool bar at the top of the screen has 3 options
12. TOUCH SCREEN WEATHER STATION WIND AND AIR PRESSURE TP1080WC Operation Manual About this manual Thank you and congratulations on selecting this professional weather station We are positive you will enjoy the benefits of accurate weather readings and the precise radio controlled time information that our instruments offer This manual will guide you step by step through setting up your TP1080WC device Use this manual to become familiar with your professional weather station and save it for future reference Glossary of Common Terms WWVB The WWVB time signal is an AM modulated time of day signal broadcasted by the NIST from USA The time base is generated from an atomic time generator which is accurate to 10 billions of one second LCD LCD is an acronym for Liquid Crystal Display This is a common type of display screen used in televisions computers watches and digital clocks BAROMETER amp BAROMETRIC PRESSURE A barometer is a device that measures the pressure of the air pushing on it this measurement is called the barometric pressure We don t actually feel the barometric pressure because the air pressure is pushing equally in every direction RELATIVE AIR PRESSURE Relative air pressure is the same as the barometric pressure The calculation of relative air pressure is a combination of the absolute air pressure and the altitude ABSOLUTE AIR PRESSURE Absolute air pressure is the actual air pressure on the bar
13. ase the value Every time a programming step is activated by touching a switching area on the Touch Screen a tone will sound and the back light is switched on for a few seconds as well If no areas are pressed for 30 seconds the LCD will automatically revert to the normal display mode automatic time out Getting Started Setup Sensors Jua I Hl wa y f N 3x20mm ma ri y Important Notes On the edge of wind direction sensor there are four alphabet letter of N E S and W representing for the direction of North East South and West Wind direction sensor has to be adjusted so that the directions on the sensor are matching with your real location Permanent wind direction error will be introduced when the wind direction sensor is not positioned correctly during installation Wind speed sensor wire has to be inserted into the phone jacket on wind direction sensor lt 5 Wind direction sensor wire has to be inserted into the phone jacket located on the transmitter with marking of Wind on top The rain sensor wire has to be inserted into the phone jacket located on the transmitter with marking of Rain on top System Start Insert two pieces of LR6 AA size batteries into the transmitter the LED located in the middle front case
14. asuring range rel humidity Accuracy Resolution Measuring range air pressure Accuracy Resolution Alarm duration Power consumption Base station Remote sensor Battery life 48 sec 48 sec 0 C 50 C 32 F to 122 F show if outside range 1 C 0 1 C 10 99 10 29 10 at 25 C 30 80 5 at 25 C 81 99 10 at 25 C 1 300 1100hpa 8 85 32 5inHg 3hpa under 700 1100hPa 0 1hpa 0 01inHg 120 sec 3XAA 1 5V LR6 Alkaline batteries 2xAA 1 5V LR6 Alkaline batteries Minimum 12 months for base station Minimum 24 months for thermo hygro sensor Remark where outdoor temperature is lower than 20 C make sure proper type of batteries to be used to assure that the device can get enough power to maintain its function properly Normal alkaline batteries is not allow to be used since when outdoor temperature is lower than 20 C the battery s discharging capability is greatly reduced yt Please help in the preservation of the environment and return used batteries to an authorized depot All rights reserved This handbook must not be reproduced in any form even in excerpts or duplicated or processed using electronic mechanical or chemical procedures without written permission of the publisher This handbook may contain mistakes and printing errors The information in this handbook is regularly checked and corrections made in the next issue We accept no liability for tech
15. ctions the sixth time to display maximum pressure record to display maximum pressure the recorded maximum value will be flashing MAX icon will light up as well Hold the maximum value for 3s the maximum value will be reset to current reading 7 Touch the PRESSURE section the seventh time to display minimum pressure record to display minimum pressure record the recorded minimum value will be flashing MIN icon will light up as well Hold the minimum value for 3s the minimum value will be reset to current reading Note when absolute pressure is selected step 3 will be skipped since absolute pressure is selected for display Pressure bar graph Touch the PRESSURE BAR GRAPH section and then press or to toggle the bar graph time scale between 12hrs or 24 hrs for pressure history Time enone Lr x 1 Touch the TIME section button and H button will be flashing Touch the f button or H button to adjust the contrast level from 0 to 8 default 5 Note At Europe 0 for GMT 1 time zone 1 for GMT 2 time zone 1 for GMT time zone At America 4 for Atlantic time zone 5 for Eastern Time zone 6 for Central Time Zone 7 for Mountain Time zone 8 for Pacific time zone 9 for Alaska time zone 10 for Hawaii time zone 2 Touch the TIME section again button and H button will be flashing Touch the H button or H button to set the timezone 3 Touch the TIME section again the third time button and H button will be flash
16. e hold thel button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 4 Touch the INDOOR TEMPERATURE section the fourth time to display maximum indoor temperature record the maximum records will be flashing MAX icon will light up as well Hold the flashing max value for 3s the maximum value will be reset to current reading 5 Touch the INDOOR TEMPERATURE section the fifth time to display minimum indoor temperature record the minimum records will be flashing MIN icon will light up as well Hold the flashing min value for 3s the minimum value will be reset to current reading outdoor temperature l 26B BE TENDENCY Cate I iiliji IJI g Mh E Activate the outdoor temperature related setting by 1 Touch the OUTDOOR TEMPERATURE section button and H button will be flashing Touch the button or H button to Shift the display between Outdoor Temperature Wind Chill and Dew Point 2 Touch the OUTDOOR TEMPERATURE section again button and H button will be flashing Touch the button or H button to Shift the display unit between C and F 3 Touch the OUTDOOR TEMPERATURE section the third time to set the outdoor temperature high alarm function the and H button will be flashing HI AL icon will light up Touch thel button or H button to change the value ho
17. erage Speed and Gust Speed 2 Touch the WIND SPEED section again 4 button and H button will be flashing Touch the button or H button to select wind speed unit between km h mph m s knots bft 3 Touch the WIND SPEED section the third time to set the high alarm function the h and m button will be flashing HI AL icon will light up Touch thel button or H button to change the value hold thel button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 4 Touch the Wind SPEED section the fourth time to set wind direction alarm function the wind direction arrow will start to flashing Touch or to select desired alarm for wind direction press ON OFF to enable or disable the wind direction alarm 5 Touch the Wind SPEED section the fifth time to display maximum wind speed record the recorded maximum value will be flashing MAX icon will light up as well Hold the maximum value for 3s the maximum value will be reset to current reading Rain lr eames N w _ oy us E a SE WIND ms RAIN O 68307 Activate the rain related setting by 1 Touch the rain section lH button and H button will be flashing Touch the button or H button to Shift the display between 1h 24h week month and total rain 2 Touch the rain section again button and H button will be flashing Touch the but
18. ing Touch the button or H button to Shift the 12 24 hours format 4 Touch the TIME section the fourth time button and H button will be flashing Touch the fH button or H button to set the DST ON or OFF Note DST OFF indicates that the feature is off and the internal real time clock will not change times automatically DST ON indicates that the feature is on and the internal real time clock will change times according to the DST time schedule automatically Some locations Arizona and parts of Indiana do not follow Daylight Saving Time and should select DST OFF 5 Touch the TIME section the fifth time to set the hour the and H button will be flashing Touch thels button or H button to change the value 6 Touch the TIME section the sixth time to set the Minute the and H button will be flashing Touch thels button or H button to change the value Date 1 Foe l 1 Touch the DATE section button and H button will be flashing Touch the button or H button to shift between alarm time date and week date 2 Touch the DATE section again l button and H button will be flashing Touch the button or H button to Shift between DD MM format and MM DD format for the date 3 Touch the DATE section the third time button and H button will be flashing Touch the button Or H button to set the year Hold thel button or H button for 3s to change the number in great step 4 Touch the DATE section the fourth
19. laws and international copyright treaties as well as other intellectual property laws and treaties e You may not copy the printed materials accompanying the products 23
20. ld the button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 4 Touch the OUTDOOR TEMPERATURE section the fourth time to set the outdoor temperature low alarm function the Hk and H button will be flashing LO AL icon will light up Touch thel button or H button to change the value hold the button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 5 Touch the OUTDOOR TEMPERATURE section the fifth time to display maximum outdoor temperature record the recorded maximum value will be flashing MAX icon will light up Hold the flashing max value for 3s the maximum value will be reset to current reading 6 Touch the OUTDOOR TEMPERATURE section the sixth time to display minimum outdoor temperature record the recorded minimum value will be flashing MIN icon will light up as well Hold the minimum value for 3s the minimum value will be reset to current reading Indoor humidity SE Activate the indoor humidity related setting by 1 Touch the INDOOR HUMIDITY section again to set the indoor humidity high alarm function the and H button will be flashing HI AL icon will light up Touch thel button or H button to change the va
21. lue hold thek button Or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 2 Touch the INDOOR HUMIDITY section again to set the indoor humidity low alarm function the A and H button will be flashing LO AL icon will light up Touch the button or H button to change the value hold thel button or H button for 3s to change the number in great step Touch the button to choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 3 Touch the INDOOR HUMIDITY section the third time to display maximum indoor humidity record the recorded maximum value will be flashing MAX icon will light up as well Hold the maximum value for 3s the maximum value will be reset to current reading 4 Touch the INDOOR HUMIDITY section the fourth time to display minimum indoor humidity record the recorded minimum value will be flashing MIN icon will light up as well Hold the minimum value for 3s the minimum value will be reset to current reading Outdoor humidity Procedures and settings are similar to Indoor humidity Wind speed NE yi RAIN TOTAL 64 34 18 Activate the wind related setting by 1 Touch the WIND SPEED section button and H button will be flashing Touch the button or H button to Shift the display between Wind Av
22. mp WindChill DewPoint Current Wind Speed Current ms Gust Current _ ms YA Rainfall Hour Rainfall Current mm 24 Hour Rainfall Current mm Week Rainfall Current mm Month Rainfall Current mm C WindChill Current Total Rainfall Current mm USB Unconnected When memory is full it will take about two minutes to upload all history data into PC and it takes another two minutes to process all history data for graphic display Further detailed PC software user manual can be found from the help menu Specifications Outdoor data Transmission distance in open field 100m 300 feet Frequency 0 915MHz North America Temperature range 40 C 65 C 40 F to 149 F Accuracy VC Resolution 0 1 C Measuring range rel humidity 10 99 Accuracy 10 29 10 at 25 C 30 80 5 at 25 C 81 99 10 at 25 C Resolution 1 Rain volume display 0 9999mm show if outside range Accuracy i 10 Resolution 0 3mm if rain volume lt 1000mm 1mm if rain volume gt 1000mm Wind speed 0 160km h 0 100mph show if outside range Accuracy 1m s wind speed lt 10m s 10 wind speed gt 10m s 14 Measuring interval outside transmitter Water proof level Indoor data Measuring interval pressure temperature Indoor temperature range Accuracy Resolution Me
23. nical mistakes or printing errors or their consequences All trademarks and patents are acknowledged EasyWeather PC Software User Manual 1 0 General Information This Weather Station is a high quality easy to use weather monitoring system that reads displays and records the weather data from internal as well as external sensors Besides the internally measured values for indoor temperature indoor humidity and air pressure the outdoor sensor will take data for temperature and humidity wind and rainfall Operation of these units is by wireless transmission to the Display Console After installing the EasyWeather program on this CD ROM your PC can display all indoor data as well as the weather data from the Display Console received from the external sensors For operation simply use the USB cable supplied and connect the Display Console to the PC From now on you can start to track current and history weather information at your finger tips 2 0 System Requirements To install the EasyWeather software onto your PC the minimum requirements are as follows Operating System Windows NT4 Service Pack gt 6a Windows 2000 Windows XP Windows Vista Windows 7 Windows 8 Internet Explorer 6 0 or above Processor Pentium Ill 500 MHz or above Memory at least 128MB 256MB recommended CD ROM Drive Display Console and PC must be connected by USB cable 3 0 Installation of the EasyWeather Software Firstly the Display Co
24. nsole and the Outdoor Sensors should be connected and checked for correct function see Operation Manual for TP1080WC Touch Screen Weather Station for setting up the Weather Station After successful checking install the EasyWeather software as follows Switch on your PC and insert the CD ROM into the CD ROM Drive Double click Easyweather exe Select the installation process language option and click ok click next and select the destination folder change directory when needed click next and select the shortcut folder change directory when needed click next and select the additional tasks Click next and setup is now ready to begin installing Easyweather on your computer Click install software will be installed automatically Press Finish to finish the installation process and exit If you tick Launch Easyweather the software will start to run From Start All Programs EasyWeather path and double click the EasyWeather icon to start application ONDA RW 4 O Note The graphic function needs the software to be installed under the administrator account If it is installed under limited user accounts the graphic function of the software might not be working correctly 4 0 Basic Settings of the EasyWeather Software After the EasyWeather exe program has been started the following main window will appear on the PC screen P WINS Cy P WRU LIPXTt P YA EasyWeather System Record
25. of transmitter will be turned on for 4 seconds then it will be off and start to work normally The transmitter will make a data transmission and then start radio controlled time reception routine If time signal can be detected correctly then the LED will start to flash 5 times indicating time signal has been found correctly When time signal is bad and reception is not possible the transmitter will terminate radio controlled time reception within one minute and resume normal mode When there is a data transmission happened the LED will be on for 20ms During radio controlled time reception period there is no transmission and normal transmission will only resume after time reception routine is complete The longest time for radio controlled time reception is 5 minutes After inserting the batteries into the Display Console all LCD segments will be turned on for a few seconds all possible display segments are turned on for checking After this the Display Console will make initial measurement and start to register the transmitter the radio reception icon will be turned on Before there is outdoor data received it is not allowed to touch the LCD otherwise the outdoor sensor learning mode will be terminated right after the touch of LCD When outdoor transmitter has been registered the Touch Screen Display Console will automatically switch to the normal display mode from which all further settings can be performed by the user If no RCC signal
26. ometer without regard to altitude INCHES OF MERCURY inHg Inches of Mercury is the common unit of measurement for air pressure in the United States HECTOPASCALS hPa Hectopascals are the common units of measurement for air pressure in the International System SI of measurement The hectopascal holds the same value Important Note Before inserting batteries please carefully read the operation manual The weather station TP1080WC includes a touch screen display console receiver a transmitter unit one wind direction sensor one wind speed sensor one rain gauge USB cable and a PC software package on CD ROM The Display Console is equipped with a Touch Screen LCD Monitor and allows the display of a large variety of time and weather data Left Top LCD IN OUT temperature and humidity Right Top LCD Wind and Rain measurement Left Middle LCD Weather Forecast Tendency Right Middle LCD Air Pressure and Air Pressure History Bottom Line LCD Time and Date Memory Data Usage Note The presence of the Alarm On icon in the section means that the particular alarm has been enabled An added feature of the Weather Station is the readout of all measured and displayed time and weather data on a PC Important Operation Notes All actions and functions of the weather station are started on the touch screen by slightly touching not pressing the related areas touch the flashing h or H to make the corresponding selection or incre
27. peed hae bi 2010 1 31 5 53 00 43 2010 1 7 10 10 00 Max 265 7 km h JI 2010 1 7 23 28 00 Outdoor Humidity Max 36 2010 1 4 13 45 00 j 21 2010 1 7 9 53 00 MBE 312 1 km h 2010 1 2 17 30 00 Indoor Temperature Hour Rainfall Max 31 4 C 2010 5 27 9 51 00 i 23 4 c 2010 1 5 2 50 00 Max 43 20mm 2010 1 26 5 43 00 Outdoor Temperature 24 Hour Rainfall Max 29 8 c 2010 1 3 10 38 00 in 27 8 C 2010 1 4 23 46 00 Max 64 50 mm 2010 1 3 16 22 00 DewPoint Week Rainfall Ma 26 7 c 2010 1 4 13 45 00 oe 21 4 2010 1 2 2 55 00 Mi 76 ao mm 2010 1 3 16 22 00 Windchill Month Rainfall Max 29 8 c 2010 1 3 10 38 00 ini 58 2 C 2010 1 4 23 46 00 Max 124 80 mm 2010 1 26 5 43 00 Absolute Pressure Total Rainfall Max 1020 0 hpa 2010 1 26 6 09 00 in 992 9 hpa il 2010 6 7 12 20 00 Ma 124 80 mm 2010 1 26 5 43 00 Relative Pressure Max 1026 3 hpa 2010 1 26 6 09 00 999 2 hpa 2010 6 7 12 20 00 This section is used to display the recorded min and max value recorded with time stamp Min Max reset can only be done through key operation on the display console 4 1 4 Click Language button enters the Language menu Language Language English w History
28. t as image Cancel End Time 2013 3 30 Pressure a a ee eee ed ee ee ia AA 2013 08 03 00 00 00 2013 08 10 00 00 00 2013 08 17 00 00 00 2013 08 24 00 00 00 Start Time 2013 8 2 A 16 59 37 pem vi aati Ss aa Search Export as image Cancel aa EndTime 2013 8 30 17 59 37 Pressure Relative Pressure Absolute Pressure 2013 08 05 00 00 00 2013 08 06 00 00 00 2013 08 07 00 00 00 With the Export as image button you can export the selected graph into jpeg format file You can change the Y axis by scrolling the mouse up and down roller 21 What to do if graph function is not working This is the most encountered problem with this software To make the graph function working properly please check the following step 1 find the folder where the EasyWeather exe file is located 2 Create a file name reg_graph bat file with wordpad or notepad editor program 3 Type regsvr32 easyweather ocx and save the reg_graph bat file 4 Double click reg_graph bat file and it should register the graphic driver again If successful then the following window will be displayed C Program Files EasyWeather gt regsur32 easyweather ocx RegS v2 a xl J 7 DilReaisterServer in easyweather ocx succeeded 4 3 Help option EasyF eather Record yeh System Pressure About Easy Weather A Relative Pressure Current
29. ton or H button to select rain fall unit between mm inch 3 Touch the rain section the third time to set the high alarm function the H and H button will be flashing HI AL icon will light up Touch thel button or H button to change the value hold thel button or H button for 3s to change the number in great step Touch the button to 9 choose the alarm on or off if alarm is enabled the speaker icon will be turned on indicating the alarm function has been enabled 4 Touch the rain section the fourth time to display current maximum rain fall record Touch the rain section for 3s will reset the maximum rain fall value to current value 5 Touch the rain section the fifth time to reset rain fall value to 0 by pressing the rain section for 3s then 1h 24h week month and total rain will be reset to 0 Weather forecast TENDENCY 1 Touch the WEATHER FORECAST section l button and H button will be flashing Touch the button or H button to Shift the display between SUNNY PARTLY CLOUDY and CLOUDY RAINY icon 2 Touch the WEATHER FORECAST section again button and H button will be flashing Touch the button or H button to set the pressure threshold from 2 4hPa default 2hPa 3 Touch the WEATHER FORECAST section the third time button and H button will be flashing Touch the button or H button to set the storm threshold from 3 9hPa default 4 hPa Pressure PRESSURE 0h oo lil lil 1 Touch the

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents