16” Outdoor Misting Fan AF-520
Contents
1. T Waterproof cover U Misting line holder Internal pole vozzratrr knob A Name You Can Count On V Height adjustment W External pole Misting line Filter washer Valve Screws pre assembled Stand ornament Base ASSEMBLY INSTRUCTIONS Before beginning assembly of product make sure all parts are present Compare parts with package contents list and diagram above If any part is missing or damaged do not attempt to assemble the product Contact customer service for replacement parts Estimated Assembly Time 15 minutes Tools required for assembly Phillips Screwdriver not included FAN BASE ASSEMBLY FIG 1 1 Unscrew the four screws U on the base W and then attach the external pole Q to the base by tightening the four screws 2 Remove the height adjustment ring P by unscrewing it counterclockwise and slide the stand ornament V down the external pole and over the base 3 Use your finger to pull out the internal pole 0 Slide the height adjustment ring over the internal pole Fasten it to the external pole by turning the ring clockwise while holding the pole Make sure the height adjustment ring is tightly fastened before final assembly FAN HEAD ASSEMBLY FIG 2 amp 3 1 Remove the blade cap B by turning clockwise Remove the plastic nut E by turning counterclockwise Discard plastic sleeve D 2 Position the rear grille F over the motor shaft G Make sure the handle is at2. again by referring to the operating instructions Make sure the garden hose is correctly connected to the spigot and the misting hose valve that the spigot is turned on and that the valve is open Clean the clogged nozzles on the front of the fan as described under Cleaning amp Maintenance http www NewAir com 11 LIMITED MANUFACTURER S WARRANTY This appliance is covered by a limited manufacturer s warranty For one year from the original date of purchase the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship provided the appliance has been used under normal operating conditions as intended by the manufacturer Warranty Terms During the first year any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced at the manufacturer s discretion at no charge to the original purchaser The purchaser will be responsible for any removal or transportation costs Warranty Exclusions The warranty will not apply if damage is caused by any of the following e Power failure e Damage in transit or when moving the appliance e Improper power supply such as low voltage defective household wiring or inadequate fuses e Accident alteration misuse or abuse of the appliance such as using non approved accessories inadequate air circulation in the room or abnormal operating conditions extreme te
3. FF Stop The height of the fan can be adjusted by loosening the height adjustment knob P and carefully raising or lowering the fan and retightening the knob MISTING EEE 1 Connect a standard garden hose to the misting hose valve T Water pressure should not exceed 555 153 kPa 5 62 kfg cm2 The hose should be in good condition With the garden hose turned on at the spigot turn the lever on the misting hose valve to the right to turn on water to the fan Turn the lever to the left to temporarily shut down the mist CLEANING amp MAINTENANCE The fan requires little maintenance Do not try to fix it by yourself Refer it to qualified service personnel if service is needed L Disconnect from the electric socket during cleaning or assembly http www NewAir com 2 Toensure adequate air circulation to the motor keep the vents at the rear of the motor housing clear of dust fluff etc Unplug the fan before using a vacuum cleaner to clean the grilles It should not be necessary to disassemble the fan to clean it 3 Wipe the exterior with a soft cloth soaked in a mild detergent Do not use any abrasive detergents or solvents to avoid damaging the surface Do not use gasoline thinner or bending to clean the fan 4 Do not allow water or any other liquid into the motor housing or interior parts MISTING NOZZEL MAINTENANCE If the misting nozzles become clogged unscrew them from the fan grille and soa
4. Q NEULWJA AF 520 16 Outdoor Misting Fan OWNERS MANUAL Read and save these instructions lb Intertek A Name You Can Trust Trust has to be earned and we will earn yours Customer happiness is the focus of our business From the factory to the warehouse from the sales floor to your home the whole Newair family promises to provide you with innovative products exceptional service and support when you need it the most Count on Newair As a proud NewAir owner welcome to our family There are no robots here real people shipped your product and real people are here to help you Thank you for your purchase and remember NewAir A Name You Can Trust Call us today at 855 963 9247 Or email support newair com fr 1 For future reference we recommend you attach a copy of your sales receipt here and record the following information You will need this information if it becomes necessary to contact the manufacturer for service inquiries Date of Purchase Serial Number Model Number Connect with us online http www NewAir com READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Safety Information amp Warnings rarnnnnrrnnnnrnnnnrrnnnrrnnnnrnnnvrnnnnvnnnnenenn 4 Pil ve 5 Assembly WINSTLUCTIONS xtessaccesisenaws teeanewastianeds desanctecticesesteancesnteseavedes 6 Fan Base Assembly Fig Luaraavssormmestusasmaene 6 Fan Head Assembly Fig 2 amp 3 eesesssssrssrreerrrererererer
5. is fan is provided with a ground fault circuit interrupter GFCI built in to the plug of the power supply cord This device provides additional protection from the risk of electric shock Should replacement of the plug or cord become necessary use only identical replacement parts that include GFCI protection e Do not leave the fan running unattended e Do not use fan in a window Rain may create an electrical hazard e Do not stick any object or body parts in the grille of the fan while the blades are moving or the fan is plugged in e Before using the unit check if the voltage indicated corresponds with the intended outlet 120V e Connect power after the fan is fully assembled e Unplug from outlet when not in use when moving fan from one location to another before putting on or taking off parts and before cleaning e Be sure fan is on a stable surface when operating to avoid overturning e Do not use any appliance with a damaged cord or plug Discard fan or return to an authorized service facility for examination and or repair e Children should be supervised to ensure they do not play with the appliance e Keep cord away from traffic areas to avoid risk of tripping http www NewAir com IArmone PARTS LIST Front grille Blade cap Fan blade Plastic sleeve Plastic nut Rear grille Motor shaft Clutch knob NS s SN MINNE A A Z 4 J AN Motor housing Q Push button R Thumb screw S Power cord
6. k in vinegar or a lime scale remover until they are clear of buildup Use a non metallic brush to scrub them if necessary If the nozzles remain obstructed contact the manufacturer for replacements Warning never try to clear the nozzles with pins or other sharp objects as this can cause damage If the misting hose valve becomes clogged unscrew the head of the valve and flush it with running water to clear debris Make sure the screen inside the misting hose is clean as well STORAGE Before storing follow the assembly instructions in reverse to dismantle the fan Clean the individual parts with a soft damp cloth and allow the pieces to dry completely before packing Pack it in the original box or cover it with plastic or cloth Store the fan in a clean dry place A Name You Can Count On 10 TROUBLESHOOTING Problem The fan has no power The fan is not rotating No mist is produced Nozzles are leaking or dripping Possible Causes The unit may be plugged in using a different voltage The circuit breaker may be tripped or there is a blown fuse There is an obstruction There is no water coming from the hose The nozzles are clogged Solution Check if using the wrong voltage Reset the circuit breaker or check for a broken fuse Check for obstructions in the fan If you find something turn the fan off Unplug the fan and carefully remove the obstruction Plug the fan in and turn it on
7. mperatures e Use in commercial or industrial applications e Fire water damage theft war riot hostility or acts of God such as hurricanes floods etc e Use of force or damage caused by external influences e Partially or completely dismantled appliances e Excess wear and tear by the user Obtaining Service When making a warranty claim please have the original bill of purchase with purchase date available Once confirmed that your appliance is eligible for warranty service all repairs will be performed by a NewAir authorized repair facility The purchaser will be responsible for any removal or transportation costs Replacement parts and or units will be new re manufactured or refurbished and is subject to the manufacturer s discretion For technical support and warranty service please email support newairusa com A Name You Can Count On
8. rseressree 6 Final Assembly Fig 4 cccsscscsssccsssccsescucuscscussscussenaeseneusens 7 Operating Instructions rrrrnernnrrnnvnavnnvrnnvnnvnnnvnnvnnsnnnennvnnsnnnennsnnseneee 8 OVN NN 8 VE EEE 8 Cleaning amp Maintenance rarrnnnrrnnnnrnnnnrrnnnvrnnnnrnnnnvnnnnennnnnnnnunennnnene 8 Misting Nozzel Maintenance rrnannnnnnnnnnnnnnnnnrnnnnvnnnnnnnnnvrnnnnene 9 Tb 9 Troubleshooting eis verve 10 Limited Manufacturer s Warranty cccccssecccssseceseeeeeeseeneseeeneens 11 SPECIFICATIONS POWER CONSUMPTION FANSPEEDS 3 iC SPRAY NOZZLES A Name You Can Count On SAFETY INFORMATION amp WARNINGS When using any electrical appliance basic safety precautions must be followed in order to reduce the risk of fire electrical shock and or injury to persons or property Be sure to read all instructions before using this appliance and observe the following safety tips e Toreduce the risk of fire or electric shock do not use this fan with any solid state speed control device e g a dimmer switch e This product must be grounded If it should malfunction or break down grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug Plug into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances e Th
9. the top and the one notch in the rear of the cover fit over the three prongs on the motor housing H 3 Secure the rear grille by turning the plastic nut E clockwise and tightening firmly 4 Slide the fan blade C with the hollow interior of the blade facing towards the rear grille onto the motor shaft 5 Secure the fan blade onto the motor shaft by turning the blade cap counterclockwise until it is firmly in place http www NewAir com 6 Mount the front grille A with the logo in the proper direction and secure the front grille and the rear grille together by fastening eight grille clips Secure the screw FINAL ASSEMBLY FIG 4 Loosen the thumb screw K by turning it counterclockwise Always keep the water proof cover M even with the height adjustment knob P when adjusting the internal pole O 3 Insert the internal pole into the neck joint and tighten by turning the thumb screw clockwise Make sure it is tight enough to support the fan head Fasten GE Ss TAN A Name You Can Count On OPERATING INSTRUCTIONS FAN ONLY OPERATION Place the fan on a level surface Plug the GFCI plug into a standard 120V 3 prong wall outlet To start stop fan oscillation push down pull up the clutch knob J To adjust the airflow upward or downward simply tilt the fan head by hand and move to desired angle Control speed by pushing the desired button H High SOW M Medium 45W L Low 40W O
Download Pdf Manuals
Related Search