Home

TV RADIO SAT SOCKET USER`S MANUAL

1. Output Attenuation 13 13 14 14 14 TV TV Decoupling 46 40 36 RF TV_ Decoupling 48 RF RF Decoupling 44 SAT SAT Decoupling 32 EDA 3902F Terminated TV Radio SAT Socket RF TV SAT f IMHz 87 5 108 47 68 174 470 470 862 950 2400 Subscription Loss 2 1s 15 1 5 2 0 Warning For distribution use an terminated socket at the end of the column or install a 75 Off resistance to the sockets
2. 3902F outgoing in the wall case After leaving 15 cm piece in the case peel off the outer isolation sheath at the tips and place the conductor in the middle to its socket in the base plate and tightening screw it tightly 7 Pay attention that the screening featured external way on the cable Passive Way is under the cover and not touching to the cover Then place the baseplate 5 in to the wall case and fix it by tightening the pinching screws 6 Primarily remove the cover screw on the baseplate to install the upper set 4 then mount the transparent components 2 onto the frame Mount the upper cover on the frame as seen in the figure and after placing it so as to match the screw holes on the upper cover and the plate fix them with the cover screw removed from the baseplate by using an appropriate screwdriver If there will be more than one socket in a flat at multiswitch applications a star shaped distribution should be provided by installing a splitter at the flat 37 3 UHF VHF MULTI SWITCH EDA3902F EDA3902F lenr a ce DA3902F TV Distribution Board in building EDA3902F EDA3902 EDA3902F A throughpass satellite socket should never be used with multiswtich applications e Only one satellite receiver can be operated on the same way simultaneously RF TV SAT fIMHZz 87 5 108 47 68 174 470 470 862 950 2400 Throughpass Attenuation 1 5 1 5 1 5 2 0 2 5
3. TV RADIO SAT SOCKET U 1 Cover 2 Transparent part 3 Frame 4 Screw of the cover 5 Base i 6 Screw of the claw 7 Tightening screw 8 Cable fixing plate 9 Screw of the cable fixing plate ER S MANUAL Coaxial cable EXAMPLE WIRING DIAGRAMS man fal mmt Example 1 GEDA 3913 TV SAT RAD 5 862 MHz Example 2 Cable TV GEDA3913 GEDA3913 GEDA 3913 Central Antenna EDA 3902F Input TV SAT RAD 200 2400 MHz Flat Entranc Digital box distribution converted on 5 trib iti N TV Distributio Input GEDA 3913 single cable Board in Splitter Block EDA3902F EDA3902F EDA3902F 5 862 MHz Cable TV or Central Anten Example 3 Input EDA 3902F TV SAT RAD TV Distributio Board in Splitter Building Specifications e CE Approved Convenient for shared antenna and SAT systems e F coket output for satellite connection Screening up to 470 MHz 75 dB up to 470 862 MHz 65 dB up to 950 2400 MHz 55 dB e Convenient for thin coaxial cables and other coaxial cables with max 5 5 mm exterior isolation e In accordance with IEC 169 2 EN50083 1 A1 EN50083 2 A1 Wiring Diagram Open the cable fixing plate 8 by loosening the screw on it with a suitable screwdriver Pay attention to leave minimum 15 cm extra cable to hold the tips of the coaxial cable from the way incoming and GEDA 3913 GEDA 3913 GEDA 3913 GEDA 3913 GEDA 3913 entrance EDA3902F EDA3902F EDA

TV RADIO SAT SOCKET USER`S MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents