Idema Underwater lights
Contents
1. Installation and maintenance manual Underwater lights Document no DC10000864 Page 27 of 31 AKVAGRour Appendix C Notes Installation and maintenance manual Underwater lights Document no DC10000864 Page 28 of 31 AKVAGRour Installation and maintenance manual Underwater lights Document no DC10000864 Page 29 of 31 Appendix D Contact information NORWAY AKVA group ASA Head Office Nordlysveien 4 PO Box 271 N 4340 Bryne Norway tel 47 51 77 85 00 fax 47 5177 85 01 Support Hardware and AKVAconnect tel 47 51 77 85 03 supportakvasmart akvagroup com Support Fishtalk tel 47 73 84 28 20 supportfishtalk akvagroup com DENMARK AKVA group Denmark AS Land Based B dkervej 7A 1 7000 Fredericia Denmark t 45 7551 3211 f 45 7551 4211 AKVA group Denmark AS Land based Rosklidevej 342 Building 2 2630 Taastrup Denmark t 47 7551 3211 AKVAGRour SWEEDEN AKVA group Agent Modus Trading AB F rjeg rdarne 7 78461 Borl nge Sweden t 46 0 243 883 22 f 46 0 243 21 17 78 modus dalnet se FINLAND AKVA group Agent OY MG Trading AB Ivisn splanen 2E SF 02260 Esbo Finland t 358 9867 68422 f 358 9867 68420 ICELAND AK2. All of our equipment is pre installed tested and delivered from our own production department This means that our customers have total control over which components you can choose from grouping collocation testing and deliveries Our production staff consists of people with great expertise and engagement for producing the best possible products Having our own production site provides excellent service in case something should go wrong or if assistance is required Our service staff is available over telephone or on location to assist whenever necessary Safety both for users and equipment is main focus when AKVA group develops products and product manuals Installation and maintenance manual Underwater lights Document no DC10000864 Page 10 of 31 AKVAGRour 2 3 About Idema Underwater lights Natural light affects the fish s perception of season and controls important biological processes like smoltification pubertiming growth rate as well as feed utilization Artificial light contributes to influence these processes so that they occur at the optimal time for the commercial operations Idema Underwater Lights are often used for salmon trout cod and other fast growing species in large cage farms Light treatment is also successfully used on smolt and juvenile in tanks and cages of different types and sizes Correct use of Underwater Lights in aguaculture ensures reduced amounts of mature fish in addition to much faster growt
3. POM 1 41g cm3 POM 1 41g cm3 POM 1 41g cm3 Main housing density DIN 53479 L15 DIN 53479 L15 DIN 53479 L15 Material in connection Fire coated box aluminum Pyro Borocilicate ISO 3585 ISO 3585 ISO 3585 glass 3 3 2 23g cm3 2 23g cm3 2 23g cm3 Cable standard length PUR 3G1 5 PUR 3G1 5 PUR 3G1 5 35m or 55m 35m or 55m 35m or 55m Cooling fluid Recommended use Tanks medium and small cages Medium and large cages Large cages Installation and maintenance manual Underwater lights Document no DC10000864 Page 15 of 31 AKVAGRour 3 Suspension for connection box AN Antiskid footwear and safety garments such as safety vest are mandatory for working on or by the cage edge 3 1 For SubLite Standard 2000W A Do not install the SubLite Standard 2000W connection box inside sealed cabinets Sealing in the connection box can cause overheating Due to its weight it is recommended that the connection box is mounted horizontally as shown in the figure 3 2 For SubLite Integra 250W 400W 1000W Can also be hung by the hand rail 1 Insert the bolts from the back side 2 Mounting brackets behind the pipe 3 Rail 4 Connection box 5 Under water light cable Installation and maintenance manual Underwater lights Document no DC10000864 Page 16 of 31 AKVAGRour 4 Power connection SubLite vest are mandatory for working on or by the cag
4. This is a light with blue light rays is our newly developed luminaire for the sea cages This Nemco approved luminaire is utilizing the newest High Intensity LED technology with eight times more effective light source than the BlueLED 100W The blue color has proven to be the most efficient when it comes to effect on biology in the fish LED luminaires can provide more effective output from each luminaire compared to other lamp technologies It saves cost on power generators uses less power and uses less copper in the installations All this in addition to a long service life of the luminaire and the fact that after 100 000h the effect of LED has decreased only 10 Recommended use Medium and large cages Installation and maintenance manual Underwater lights Document no DC10000864 Page 12 of 31 AKVAGRour SubLite Integra 250 400 The smallest member of the SubLite family The light can be offered in two luminosities for smolt juvenile and smaller locations This model is often used in cod farming with lights placed at various depths for a smooth distribution of light all over the cage The light bulb and the electronic control device are integrated in the housing compartment and have a service time in the region of 5 000 hours Recommended use Tanks smaller and medium cages SubLite Integra 1000 W Our bestselling light for salmon farms and the most rugged light unit in the market It is placed at various depths and the
5. powerful light ensures an excellent spread The light bulb and the electronic control device are integrated in the housing and are easy to install This unit also has a service life in the region of 5 000 hours Recommended use Medium and large cages Standard 2000 W The most powerful solution we offer It provides extra strong lighting in large cages where there is a need for strong light conditions without using a lot of separate units It features solid construction with a separate connection box and a service life in the region of 5 000 hours Recommended use Large cages Installation and maintenance manual Underwater lights Document no DC10000864 Page 13 of 31 2 3 3 Technical specifications AKVAGRour Specifications BlueLed 100W BlueLed 400W Operating Voltage 230 VAC 50Hz 24DC 230 VAC 50Hz 60DC Starting current 0 5 second 1 0A 230W 1 8A 400W Starting current 1 second 2 5A 115W 1 8A 400W Operating current 2 minutes 0 5A 106W 2 15A 480W Total efficiency 115W 480W Service life with even color appr 70 000 hours appr 70 000 hours Light source 1080 LED 184 LED Color temperature 20 000 K 20 000 K 480 nm Blue Luminosity Weight light housing 8 5kg 1ikg Weight with cable 14kg appr 2L oil 19kg appr 2L oil Weight connection box Size length 641mm 120mm 641mm 120mm Main housing material Alu
6. the luminaire still and remove the tension nut 2 Pull off the glass 3 Lay the luminaire flat and replace the bulb 4 Lubricate the o rings with Super Lube or another type of teflon or silicon grease 5 Carefully push the glass into the luminaire The bulb positioner must be placed in the bottom of the glass Make sure that no impurities lies on the o rings or on the glass and ensure that the o ring lies firmly against the glass all the way around Hold the luminaire still and fasten the tension nut using the hooked spanner Installation and maintenance manual Underwater lights Document no DC10000864 Page 21 of 31 AKVAGRour 6 1 2 SubLite Integra 250W 4000W 1000W 1 Place the taps of the hooked spanner in the holes of the tension nut Carefully screw the tension nut counter clockwise to open There might be gas pressure inside the lamps glass so make sure that the opening is never lt directed towards a person when opening the tension nut 2 Lift off glass and tension nut and 4 y change the bulb Avoid touching the new bulb with bare hands to avoid finger marks on the glass Wipe with methylated spirit when the bulb has been changed Lb CG 3 When changing the bulb you should also change o rings ME ces The o rings must be lubricated with Super Lube Make sure that the glass and the o rings are clean and free from any dirt prior to fastening the tension
7. AKVAGRour INSTALLATION AND MAINTENANCE MANUAL Idema Underwater lights B 20 10 15 Re Approved ECO 0000812 EBL HR A 08 05 15 Approved ECO 0000724 EBL HR Rev Date Issued Issued by Approved by Document DC10000864 Document 10001193 Project no 88074 01 no part no Installation and maintenance manual Underwater lights Document no DC10000864 Page 1 of 31 AKVAcrour SVA AS y e es For a thorough introduction of Your AKVA product we ask that all users read this entire manual If questions occur contact us The information in this document is subject to change without notice and should not be construed as a commitment by AKVA group ASA AKVA group ASA assumes no responsibility for any errors that may appear in this document In no event shall AKVA group ASA be liable for incidental or consequential damages arising from use of this document or of the software and hardware described in this document We reserve all rights in this document and in the information contained therein Reproduction use or disclosure to third parties without express authority is strictly forbidden This document can also be read and downloaded from our web site see www akvagroup com products user manuals 2015 AKVA group ASA NO Installation and maintenance manual Underwater lights Document no DC10000864 Page 2 of 31 AKVAcRour
8. Table of contents 1 DE Le AA RE M Pa 4 1 1 Safety SYMmbols s sryemi aim yarak yel a lek ai yal Ya db dave here 4 1 2 Receiving new equipment Meram md lam ala da k sand sekle ei nek e ig 5 1 3 Personnelsafety na aeneskral 5 1 4 Product and equipment safety laa 6 1 5 Oil inside the BlueLed 100W and 400W ea 6 1 6 Relevant Standards samed ae a rear aks 7 1 7 Disinfectingeguipment 0 eee aaa SESE nasa 7 2 Introduction sxasennennvnnnnnnnnnunnennnnnvnnvnnnnnnnnvvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnr 8 2 1 How to use this manual seecccsevcosisecevi oes kalk iinit ia hk gk bil le pia kirker 9 2 2 About AKVA MOU Dikran enis kel sak aa nel di ka sta eli iy limana ene ia Baal ina Sa a 10 2 3 Aboutidemal nderwaterli ghts ene tas 11 3 Suspension for connection box asrsrnsusnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 16 3 1 For Sublite Standard 2000W 0 00 a 16 3 2 For Sublite Integra 250W 400W 1000W 16 4 Power connection SubLite arranrannnnennnnnnnnnnnnennennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 17 5 Luminaire SUSPENSIONS rarssunsunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 18 6 Service and maintenance xsrxnsrnnnnnnnnnnnnnnnnnnnnnvnnnnnnnnvnnnnnnnnnnnnnnnn
9. VA group Agent Wise lausnir ehf Borgartun 26 105 Reykjavik Iceland t 354 545 3200 f 354 545 3232 UK SCOTLAND AKVA group Scotland Ltd 36F Shore Street Inverness Scotland UK IV1 1NF t 44 0 1463 221 444 f 44 0 1463 223 535 Installation and maintenance manual Underwater lights Document no DC10000864 Page 30 of 31 GREECE Akvasmart Fishtalk Agent Zellas Trading Company Dodekanisou Str GR 174 56 Alimos Athens GREECE t 30 210 7014881 f 30 210 7012666 zellastrading ath forthnet gr TURKEY AKVA group K lt r Bal k l Ekipmanlar Ltd ti Yeni K k Sanayi Sitesi No 1 C19 Baharl K y 48200 Milas Mu la TURKEY t 90 252 374 6434 f 90 252 374 6432 TUNISIE AKVA group Agent Soci t M diterran enne d Etudes et Conseils 72 Avenue Habib Bourguiba 2080 Ariana Tunisie t 216 71 700 453 f 216 71 700 297 smechg gnet tn AKVAGRour CANADA AKVA group North America Inc 1495 Baikie Road Campbell River BC VOW 1R9 Canada t 1 250 286 8802 f 1 250 286 8805 AKVA group North America Inc 5251 Duke Street Suite 606 Duke Tower Scotia Square Halifax NS B3J 1P3 Canada t 1 902 482 2663 f 1 902 405 3373 CHILE AKVA group Chile Ruta 5 Sur Km 1030 Puerto Montt Chile t 56 65 250250 f 56 65 257119 AUSTRALIA AKVA group Australasia t 61 400 167 188 cschafer akvagroup com Ins
10. aintenance manual Underwater lights Document no DC10000864 Page 24 of 31 6 6 Record of changed o rings luminaire and other parts Make copies of this form before filling it out Sign after the part luminaire is changed AKVAGRour Date Part Reason Comment Signature Installation and maintenance manual Underwater lights Document no DC10000864 Page 25 of 31 Appendix A Index A anode 23 antiskid footwear 5 16 18 20 B bulb positioner 21 22 Cc cable 6 7 11 16 20 cleaning 20 22 connection box 9 13 16 17 D disinfect 7 20 eye damage 5 H halogen bulb 11 hooked spanner 21 22 AKVAGRour L lifting rope 6 18 19 light bulb 13 20 21 light spread 11 luminaire 5 7 12 17 21 25 M male contact 23 o o ring 20 22 overheating 6 16 S silicon oil 6 sprout 20 T tension nut 20 22 Installation and maintenance manual Underwater lights Document no DC10000864 Page 26 of 31 Appendix B Deviation form Make copies of this form before filling it out AKVAGRour Deviation no Unit Producer Prod no Purchase year Deviation description Follow up proposition Date and signature declarer Follow up directed Status New action for deviation no Date and signature follow up
11. d especially this safety chapter This recommendation is based on both personnel safety as well the desire to keep the products in order as long as possible by avoiding any damages risked if the safety instructions are not followed 1 1 Safety symbols These safety symbols are used in this manual Information Show caution danger of minor personnel injuries and damages to equipment Warning may cause personnel injuries Danger Will cause dangerous situations and danger for Pe p personnel 1 1 1 Other symbols used in this manual Go to or see page or chapter for further instructions or more information Installation and maintenance manual Underwater lights Document no DC10000864 Page 4 of 31 AKVAGRour 1 2 Receiving new eguipment Always check that the delivery is complete according to the service note If the order is not complete or if any other errors are discovered contact AKVA group immediately Contact gt information is found in the back of this manual 1 3 Personnel safety Everyone who is working with or around the Akvasmart Rotor Spreader must undergo training regarding how to use the equipment and also be aware of all dangers and consequences related to misuse Owner and farm manager are responsible for informing all personnel about the contents of this manual Never lighten the luminaire in surface position or above water Never look straight at a lightened luminaire that may cause ey
12. e damage Personal safety equipment such as antiskid foot wear and floating garments are mandatory when working on and by the cage for instance when working on the rotor spreader To avoid damages to equipment and injuries to personnel during installation maintenance and other tasks performed to the Idema Under water Lights all instructions provided from AKVA group in this manual must be followed Current laws for the country where the equipment is being used also have to be followed Installation and maintenance manual Underwater lights Document no DC10000864 Page 5 of 31 AKVAGRour 1 4 Product and eguipment safety All eguipment must be treated as described in this manual The parts mentioned in this chapter are critical components and poor treatment of these as well as neglecting safety instructions may cause damages to the entire product and surrounding equipment 1 4 1 Suspensions Make sure that ropes are not in touch with other equipment or other ropes inside the cage such as the rotor spreader camera or sensor suspensions and cables This avoids interfering damages during bad weather and gnawing 1 4 2 Luminaire and glass Always control that the luminaire is complete and free of any damage before it is used The luminaire must be fully submerged in water prior to ignition Overheated glass can start to crack if it is exposed to rapid cooling 1 4 3 Cable The cable must be damage free when it is conn
13. e edge Antiskid footwear and safety garments such as safety If the installation contains long cable stretches make sure that the voltage is over 200 VAC where the luminaire is connected The luminaire must only be connected to the armature contact on the connection box and not to the main power The Idema Under Water Lights may only be used with a 230 VAC 50 HZ power connection Connection termination 1 OUT to light 2 230V AC in 3 Possible to continue transfer of 230 V In the 2000W connection box termination is found only inside the box Idema Underwater Lights are connected to power via one of two methods a Directly from barge to cage b From barge to closest cage with distribution from cage to cage three phased All light power cables are made of PUR and is available with 35 or 55 meter lengths Installation and maintenance manual Underwater lights Document no DC10000864 Page 17 of 31 AKVAGRour 5 Luminaire suspensions Antiskid footwear and safety garments such as safety vest are mandatory for working on or by the cage edge AN Always use lifting ropes when suspending the luminaire o The lights must never be hung by the cables Using incorrect suspensions will invalid any warranty rights Using correct suspensions and connections will provide desired light functions for several years ahead The luminaires must be suspended so that it does not rotate around its own axi
14. ected to power The cable must not have any bends tears or breaks after installation The cable is not designed to lift the luminaire This applies to handling on land and after the luminaire has been installed Always use lifting ropes with the underwater lights 1 5 Oil inside the BlueLed 100W and 400W Please note that the luminaire is filled with silicon oil Installation and maintenance manual Underwater lights Document no DC10000864 Page 6 of 31 AKVAGRour 1 6 Relevant standards 1 6 1 General standards Mandate for electric eguipment published by the Product and el safety Inspectors NO Forskrift om elektrisk utstyr utgitt av Produkt og elektrisitetstilsynet ISBN 82 91057 17 0 1 6 2 Safety standards EN 60598 2 1 Luminaires part 2 Particular requirements Section 1 Fixed General Purpose Luminaries EN 60598 1 A1 Luminaires General requirements and tests 1 6 3 EMC standards EN 55015 Limits and methods of radio disturbance characteristics of electrical lighting and similar equipment EN 61000 3 2 Limits for harmonic current emissions equipment input current lt 16A per phase EN 61000 3 3 Limits Limitation of voltage changes voltage fluctuations and flicker in public low voltage supply systems for equipment with rated current 3L 16 A per phase and not subject to conditional connection EN 61547 Specification for equipment for general lighting purposes EMC immunity requirem
15. ents 1 7 Disinfecting equipment If any of the equipment cables ropes or other belonging equipment is being moved to a new location it is decreed by law to disinfect everything to prevent contamination We recommend rinsing with fresh water after disinfection because the disinfectants are strong chemicals that may damage the surface materials Installation and maintenance manual Underwater lights Document no DC10000864 Page 7 of 31 AKVAGRour 2 Introduction This user manual is part of the eguipment delivered with Idema Underwater lights Keep the manual for as long as o a gt the eguipment is being used and make sure that all changes to the eguipment are being noted in the back of this manual Thank you for choosing AKVA group ASA as supplier for your underwater light system Do not hesitate contacting us for more information regarding installation use or maintenance for Idema Underwater lights or any other AKVA product The purpose of this manual is to make the user install and maintain Idema Underwater lights in a safe and economical way The manual will snow how to install and maintain the product as well as hopefully answer most day to day guestions If there is anything relevant this manual does not explain or answer please contact us for assistance and help to find a solution to any problems Contact the AKVA service department your subcontractor your local AKVA office or our main office in Norway f
16. h and more effective feed exploitation Lights installed in various depths ensures a perfect light spread Accurate and even light spread in the biomass is vital in tanks with high density and humus loaded water High guality Underwater Lights have excellent light spread simple bulb replacement functional design and a rugged constructions Power connection for underwater lights are standard IP67 plug which enables simple installation Cable length is standard 35 and 55 meters both shorter and longer cables may be provided 2 3 1 Recommended light for Salmon cages For when using halogen bulbs Size cage Surface areal Light by 3W m2 90m cage 654m2 1935W 2000W 120m cage 1146m2 3438W 4000W 157m cage 1962m2 5886W 6000W Installation and maintenance manual Underwater lights Document no DC10000864 Page 11 of 31 AKVAcrour 2 3 2 Available models BlueLed 100W This light has blue light rays the highest penetration in seawater and therefore the greatest efficiency LED Light Emitting Diode is often called eternity light and is the most cost effective light solution on the market and a perfect match to a diesel generator The light diodes have extremely long duration with a expected service life of up to 70 000 hours and after 100 000h the effect has decreased only 10 This means no bulb changing for many years ahead Recommended use Tanks and smaller cages BlueLed 400W
17. minum 6082 T6 Aluminum 6082 T6 Main housing density 2 7g cm3 2 7g cm3 Material in connection box Pyro Borocilicate glass 3 3 ISO 3585 2 23g cm3 ISO 3585 2 23g cm3 Cable standard length PUR 3G1 5 35m or 55m PUR 3G1 5 35m or 55m Cooling fluid Silicone oil Silicone oil Recommended use Tanks smaller cages Medium and large cage Installation and maintenance manual Underwater lights Document no DC10000864 Page 14 of 31 AKVAGRour Specifications Integra 250 400W Integra 1000W Standard 2000W Operating Voltage 230 VAC 50Hz 230 VAC 50Hz 230 VAC 50Hz Starting current 2 45A 563W 8 0A 1840W 13 0A 2990W 0 5 second 3 0A 690W Starting current 1 9A 437W 2 0A 6 4A 1472W 12 1A 2783W 1 second 460W Operating current 1 3A 299W 1 8A 5A 1150W 9 35A 2150W 2 minutes 414W Total efficiency 275W 460W 1065W 2070W Service life with even color appr 5 000 hours appr 5 000 hours appr 5 000 hours Light source HQI T 250D QI T 1000D HQI T 2000D HQI T 400D Color temperature 5300K 6100K 6000K 4400K Luminosity 20 000Im 85 000Im 190 000Im 35 000Im Weight light housing 7kg 10kg 21 6kg 1ikg Weight with cable 1ikg 14kg 28kg 17kg Weight connection box 19 2kg Size length 648mm 140mm 818mm 180mm 642mm 140mm Main housing material
18. nctionality and use of underwater lights regular external cleaning is recommended Use warm water with a mild soap such as washing up liquid and a soft scrub or brush to remove fouling sprout shells and other filth that gets stuck on the luminaire and cable surfaces External maintenance must be executed regularly We recommend taking the luminaries out of the water for check ups and necessary maintenance once a month and more often during the warmer sprout seasons The external parts glass POM and PUR must be disinfected if the lamp is being moved to a new location or in case disease has been detected in the location We recommend that all parts are rinsed with fresh water after disinfecting Expected service life for the LED bulbs is in the region of more than 70 000 hours or 8 to 10 years The SubLite lights are designed to last for at least 5000 hours and AKVA recommends that the light bulbs are changed after gt two seasons in the sea as shown in chapter 6 1 When changing bulb we recommended changing the o rings as well For internal maintenance beyond changing bulb and o rings contact AKVA group for a consultation Contact information is gt found in the back of this manual Installation and maintenance manual Underwater lights Document no DC10000864 Page 20 of 31 AKVAGRour 6 1 Change light bulb 6 1 1 SubLite Standard 2000W 1 Place the hooked spanner in the holes of the tension nut Hold
19. nnnnnnnnnnnnnnen 20 6 1 Change light bulb mekani me er ikeness sinde ye midea iri eva Mendes engene 21 6 2 Change male contact BlueLED 100W and 400W 23 6 3 Change anodes BlueLED 400W ieee cece cece ee eee eee eee eee eaten 1 23 6 4 Overview for maintenance service intervals aaraaraunnanvnnnnnnnnnnennnenneensernrensennnr 23 6 5 Maintenance registration 00 00 00 24 6 6 Record of changed o rings luminaireandotherparts 25 Appendix A Index aruanavnnnavnnnnvnnnnnnnnvnnnnnnnnnvnnnnvnnnnnnnvnnnnvannnvnnnnvnnnnnnnvnnnnvnnnnvnnnnn 26 Appendix B Deviation form as nnnvnnnnnnnnnnnnnnnnnnnnvunnennnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnen 27 Appendix C Notes rnrnnnnnnvnnnnnvnnnvnnvnnvnnennennvnnnnnvvnnennennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnen 28 Appendix D Contact information xsranvnnvnnnnnnnnnennvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 30 Installation and maintenance manual Underwater lights Document no DC10000864 Page 3 of 31 AKVAGRour 1 Safety Safety for the users of our products is top focus when developing new products and user manuals in AKVA group Therefore we strongly recommend that everyone that is going to be using it carry out repairs service and maintenance on the product as well as everyone working in the area where the product is installed or being used reads this entire manual an
20. nut 4 Before fastening the tension nut also assure that it is correctly positioned in the threads and that the bulb positioner is placed correctly between the glass and the bulb Installation and maintenance manual Underwater lights Document no DC10000864 Page 22 of 31 AKVAcrour 6 2 Change male contact BlueLED 100W and 400W Replacement of the male contact must only be performed by an authorized electrician 6 3 Change anodes BlueLED 400W Use a 5mm Unbraco key to release the screws then remove and change the anodes Refasten the SCrews 6 4 Overview for maintenance service intervals Activity Hours Month Year Comments Outside cleaning 1 Clean every 14th day during growth season Change light bulb BlueLed 100W 70000 When required SubLite Integra 250 400W 5000 After use for two seasons SubLite Integra 1000W 5000 After use for two seasons Standard 2000W 5000 After use for two seasons Change anode When required BlueLed 400W Change male contact When required BlueLed 100W and 400W Installation and maintenance manual Underwater lights Document no DC10000864 Page 23 of 31 AKVAGRour 6 5 Maintenance registration Make copies of this form before filling it out e Sign after the task is performed Date Lamp ID Task performed Signature Installation and m
21. o in the back of the manual and AKVA contact information This entire manual must be read and understood prior to installation of the Idema Underwater lights as well as used as aid during installation and maintenance Installation and maintenance manual Underwater lights Document no DC10000864 Page 9 of 31 AKVAGRour 2 2 About AKVA group With four main brands AKVA group ASA isa world leading supplier of technical aguaculture eguipment Since 1980 we have developed and produced fish farming equipment both for cages at sea and for land based hatcheries AKVA represents an industrial standard which is presumed to be the turn key to the future Research project management fast deliveries and customer follow up have been our focus to ensure that we contribute to a positive development within the agriculture industry Our goal is to deliver the best possible and most cost efficient equipment in order to keep preserving sustainable farming We have a wide variety of products for example plastic and steel cages high pressure washers net washers boats feed barges feeding systems cameras sensor systems under water lighting software for fish farming and recycling systems AKVA has a continuous development of products and we continue to improve product safety functions range of use and reliability The purpose of this manual is to enable users to install and maintain Idema Underwater lights in a safe and economic way
22. or assistance and help Installation and maintenance manual Underwater lights Document no DC10000864 Page 8 of 31 AKVAGRour 2 1 How to use this manual This manual describes how to install and maintain the Idema Underwater lights in the best and safest possible way This entire manual must be read and understood by ALL users prior to installation of the product Site owner and farm manager are responsible for that all site personnel and users know and understand the contents of this manual Before the first chapter is a table of contents The headlines works as links to their respective chapters in the pdf file Chapter 1 is the most important chapter of this manual and includes safety precautions ensuring safest possible use Chapter 2 contains information on AKVA group and Idema Underwater lights as well as this manual instruction Chapter 3 contains instructions to how the connection box for power must be attached to the cage handrail and in chapter 4 power connection procedures are explained How to suspend the underwater lights is shown in chapter 5 and chapter 6 contains full maintenance overview with instructions frequencies plans and forms for registration of executed maintenance tasks Four appendixes are found in the back of the manual Index with links to the rest of the manual in the pdf document a deviation form for all deviations with the system pages for notes about new and extra information are als
23. s They can be suspended as a V Or they may be stabilized with u shaped suspensions Eder Seen from above Installation and maintenance manual Underwater lights Document no DC10000864 Page 18 of 31 AKVAGRour The lifting rope must be fastened correctly to the lamp either with two ropes or with a stabilization rope that runs through both eye bolts in the lamp and stabilized with a knot Use tape or strips to fasten the cable to the rope Incorrect method Make sure that the cables are not too tightly attached They must hang flexibly to avoid strain caused by current affected movements in the luminaire and the cage If a cable is fastened wrongly and the cable is pulled off the luminaire or the bushing nipple the luminaire will leak and the light may be damaged Make sure that the cables does not have any tears or breaks before installation as this may cause further damages to the cable and weaken the effect of the lamp and reduce its life span Installation and maintenance manual Underwater lights Document no DC10000864 Page 19 of 31 AKVAGRour 6 Service and maintenance Antiskid footwear and safety garments such as safety vest are mandatory for working on or by the cage edge For maintenance and service all lamps must be brought to the barge or on land Material and design choices for the underwater lamps are made to ensure simple maintenance To secure the best possible fu
24. tallation and maintenance manual Underwater lights Document no DC10000864 Page 31 of 31
Download Pdf Manuals
Related Search