Integral Digital Sentry® DS ControlPoint
Contents
1. Spectra Mini 367 5309 kl RecorderNotifications Figure 6 Connection Management Page To add a DVMS system to the list 1 Click the Add System button or right click and select Add System from the menu This opens the Add System tab refer to Figure 7 which allows you to add systems to the system list Add System Enter settings for this new system Name Description optional New System Auto Connect Hostname or IP Address F Favorite new system 7 Video Recorder Recorder Port or System Type dl DataPoint Server 18772 Integral v Category optional Username Password cn Figure 7 Add System Tab C3674M 11 08 9 1 o 0 On the Add System tab type the computer name of the DVMS system a host name or IP address the video recorder network port and or system type and an optional category The default video recorder network ports are as follows e 18772 for DS e 9001 for DX4500 DX4600 e 9002 for DX8000 DX8100 Type the required user name and password NOTE The user name and password must be identical to the user name and password on the video recorder system to which ControlPoint Is being connected Type an optional description of the system in the Description text box If you want to automatically connect to the system every time DS ControlPoint starts select the Auto Connect check box If you w2. Tour Name New Tour Cancel 12 29 00 PM Figure 9 Edit Tour Page 2 Onthe Rename tab type a name in the Tour Name text box and then click Save 3 Click the Tours button refer to Figure 9 on page 11 This lists the tour in the Tour section of the navigation pane refer to Figure 10 on page 11 DS ControlPoint a g aa Setup In Setup mode you can configure the systems that you want fo connect to Edit Tour Use this page to view modify the items in a tour Tours are groups of streams cameras audio channels or data channels which are displayed for a set period of time specified by dwell time Groups Item Name Dwell Time Systems Tours 12 45 01 PM Figure 10 Tour Listed C3674M 11 08 4 Select the tour and click the Add Tour Item icon refer to Figure 10 on page 11 This opens the Add Tour Item tab refer to Figure 11 Ds ControlPoint 1O x A So Edit Edit Setup Live Systems In Setup mode you can configure the Edit Tour systems that you want to connect to Use this page to view modify the items in a tour Tours are groups of streams cameras audio channels or data channels which are displayed for a set period of time specified by dwell time Groups Systems New Tour Add Tour Item Configure the new tour item Drag a group system or individual
3. 800 289 9150 International Tel 1 559 292 1981 Fax 1 559 348 1120
4. NE ZO O E Dgan oe Motionborders O O y o ET CIO O Manual ecordborders CO Continuous record borders IC Audioplayback e Supportserverlocaltime Pt Suppore MTtime e Suppertdlienttime eo plocatgoups eee jSystemgroups eo Tours A O fos ME EC CI ETT EC E S Mutiplesearchtabs e o d Motionborders e S d o Members e Manual recordborders e o d Continous recordborders e S d y o Authentication pc Included semplesfiter e o S EXE MEC E S o View OSD items camera name time ste YC Qiekredes IO rro CC C3674M 11 08 25 26 Table B Supported Feature Set 2 of 2 SUPPORTED FEATURE SET O so onyx st Pepino EE eia mam NTE op sereno 2 pe poe nim O O CI O CIN mim o EAS o Pee S o o Tom Export o zo o To Toi CTE O EE Smem G a S woa S S EA Miscellaneous Simultaneous Ive and search tabs b b x DSConneX C3674M 11 08 PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace without charge any merchandise proved defective in material or workmanship for a period of one year after the date of shipment Exceptions to this warranty are as noted below e Five years Fiber optic products TW3000 Series unshielded twisted pair UTP transmission products CC3701H 2 CC3701H 2X CC3751H 2 CC3651H 2X MC3651H 2 and MC3651H 2X camera models e Three years Pelco branded fixed camera models CCC1390H Series C10DN Series C10CH Series
5. buttons to zoom in and zoom out of the currently displayed video frame if the camera has zoom capability e Focus Click the Focus buttons to adjust the sharpness of the currently displayed video frame Iris Click the Iris buttons to adjust the opening of the camera iris which increases or decreases the brightness and contrast of the displayed video C3674M 11 08 23 PAN TILT MOVEMENT AND SPEED Pan tilt movement and speed can be adjusted using the directional buttons and slider refer to Figure 28 UN EDS au Figure 28 Directional Controls on PTZ Controls Tab To adjust the pan tilt Click a directional button to move the camera in the direction indicated by the arrow Click the middle button to center the camera Click and hold the middle button to control the camera direction similar to joystick control Move the speed adjustment slider up and down to increase or decrease the pan tilt speed CAMERA PRESETS Preset controls configure the camera view to predesignated viewing areas Once configured the camera instantly moves to the predesignated view with a click of a button refer to Figure 29 Preset control features are as follows Call Click this button to move the camera to the predesignated view as displayed in the Preset Name box Up Down Arrows Click this button to scroll through the preset numbers If a number has already been assigned to a name the name appears in the Preset Name box Set Click th
6. choose a font from the drop down list The Color tab allows you to change the text s color shadow and background Select the text item and choose a color from the wheel or move the sliders on the black and white bars C3674M 11 08 Search The Search page allows you to search for recorded video on specific cameras What is displayed on the Search page depends on the camera type either a non DS camera or a DS camera If the video of a non DS camera is selected to be searched the Search page will look similar to Figure 17 Perform the following steps to search recorded video on a non DS camera 1 Click the Search icon to open the Modify Search tab 2 Drag and drop cameras from the navigation pane into the video windows 3 Enter the Start Time and End Time for the search and then click Next Ds ControlPoint Search Setup Search 9 Live Systems 1O x Si PELLO In Search mode you can search for data that occurred in the past Groups a I DS 1000 ispicamoz teDiICAMO 2ebicamos O 1BD1CAMOS o 1BD1CAMOS 1501camo7 1BD1CAMOS 18D1CAMOS 1BD1CAM11 1BD1CAM12 18D1CAM13 1BD1CAM14 18D1CAM15 1BD1CAM16 18D1CAM20 1BD1CAM22 1BD1CAM24 18D1CAM27 1BD1CAM28 1BD1CAM29 1BD1CAM30 1BD1CAM32 00000000000000090 CMA QC 1 Es 1BD1CAMO2 SQA 95 1BD1CAMO7 SQA 95 drag item here drag item here Recorde
7. field of the video monitor To exit full screen mode either right click anywhere on the page and select Exit Full Screen from the menu or press the lt ESC gt key 14 C3674M 11 08 QUICK REVIEW To view video recently recorded on the cameras displayed in the video windows click the Quick Review icon n and select the amount of video you want to view from the list You can quickly view video recorded in several increments ranging from the last minute to the last 90 minutes When you select the increment recorded video for the entire time range Is played back starting from the beginning of the increment The status bar in the bottom right corner of the screen Indicates the progress of the video You can control playback of the recorded video using the nine buttons at the bottom of the screen to view the function of a button place your mouse pointer over the button Also click the status bar or drag the slider left or right to quickly move through the video To return to viewing live video click the Live tab at the top of the window NOTE For information about exporting recorded video authenticating video or filtering samples refer to Search on page 17 PRINTING VIDEO WINDOWS To print camera images displayed in the video windows click the Print icon D On the Print tab you can select options to include the OSD text Text Overlay and to fit the images to the paper Best Fit You can also preview the print job To print the im
8. saca rd ti aa RE UR ele a A Nadine a RE 20 ta 17 EX DONE so ar aii as Sete as A tg eae tine ie hte RR tat CARA CD a hehe ee EEEE RO CS dada Ste 19 Ai Oe E EEE EA T EEE EEE EE ON 20 PICT SAM Oe S E E AA E 20 Advanced Search DS Datafolha nda bun bd Vass old ad dr Moen Ar da rn a 20 AE oE E EE E EEE AE AA E E E EEE E ET 22 ENADE CMCC Sal Uda tutte a pate ua saeara a et tee i its eraa 22 EC OMI US rear rs di E cece fa co heed noc Sl AS 23 A A r ov r RA k O de apa 23 Pan iit Movement and SPE an nn o SS on oo 24 camera ooe prea RO 24 PESE AAA ND OT 24 POI PNQ fete atte ae gra Sm a O yee R ies a ae tan ek bah a SA as Ee SS Bids tint te AE tse RR a A 20 ControlPoint Feature Setfor Ds and DX Series Products ike ted sve hw bs n Seda cias is VU DS 25 2 C3674M 11 08 List of Illustrations o JI DD OI UA V Setup INE Search and Sl AN os R TA Tv 5 Navigation Fane Tor LVE Fage nuda nd ts sateen O AA REA OLEE 5 Control o SUP cee d 6 ControlPoint Connection Management Sereen ss asse nananana unaenea o omens E EAST A CEEE ARA LST ARS ka k dene tod 7 ST AJE cr co A EA A EE EEE e po AERE E A EE en ede emcee 8 Connection Management Paji esasi trotian ota mele ahh Ful k a o a Rd a E 9 PG OV E PP RN 9 Connect Add System Edit System and Delete System ICONS 10 OO O ene ORO eT 11 Te dks nov u ah b O 11 Opened Ade Tour TETA k a k o ia tods REN ias 12 nesu me lodn Pause Tour ICONS ri ses eek gate gaia E DO A L Bo 1
9. the Add button to add parameters or click the Or button to add separate occurrences e For iOmniscient searches enter a time date range event time event type and camera name Then enter alarmed events count range side of area and direction C3674M 11 08 3 Click Next Search In Search mode you can search for data that occurred in the past Groups 18D1CAM13 1BD1CAM14 18D1CAM15 18D1CAM16 18D1CAM20 18D1CAM22 1BD1CAM24 1BD1CAM27 1BD1CAM28 1BD1CAM29 18D1CAM30 1BD1CAM32 SQA 951 SQA 952 SQA 953 SQA 954 SQA 955 SQA 956 SQA 957 SQA 958 SQA 959 SQA 9510 SQA 9511 SQA 9512 SQA 9513 SQA 9514 SQA 9515 SQA 9516 Ecce E eee 900000000000 kl Omni kl Omni hl Omnia kl Omnis hl Omnis RecorderNotifications Tours Advanced Search Setup To begin an advanced search select a data channel from a system to the left and drag it below iOmni2 DS 1000 aloja a PELLO FastLane Search Criteria Specify a start and end time for your search Then use the control below to build your search conditions Start Time 4 8 2008 3 55 05 PM End Time 4 14 2008 3 55 05 PM Using Greenwich Mean Time GMT A results window opens which contains a list of events that meet the search criteria To view video of the event if applicable click the View E CEM cap x x x x A x E A x x A x ES x x x x w Figure 23 Advanc
10. 0 000 video frames can be represented by the grid Use the mouse pointer to select a range of grid marks which will indicate by gray highlight the range of video frames to be searched There are four colors for the peaks and ridges within the search grid and each color represents one of the following video states Red Alarm video e Blue Motion video e Yellow Event video e Green All other video Use the mouse wheel or the plus and minus buttons located on the grid to zoom in and out To cycle through the time range of the video frames click the arrows on the left and right sides of the grid Click the date and time drop down box to use the calendar to adjust the date and time of the search refer to Figure 21 Modify Search Enter your search criteria Enter the start and end times of your search and then click Next to perform the search 5 29 2008 8 10 04 AM Using Local Time EN May 2008 Ez 5 29 2008 5 29 2008 5 29 2008 5 29 2008 4 00 AM 8 00 AM 12 00 PM 4 00 PM Sun Mon Tue Wed Thu Fri Sat 27 28 29 30 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Figure 21 Search Grid for Calendar EXPORT DS ControlPoint allows you to export both recorded video and individual captured images to the client computers hard drive or other connected media Figure 22 Modify Search Export Authenticate Samples Print and Filter Samples Icons To export video included from a se
11. 2 Full Screen Layout Create Group ana PERE ICONS sto a tak a Sane Latas esses net ed NI 13 ERC AGG ri a SS e Du eee ae lca a at aN a eh a ball is a e 13 Create TO Tas u a es hes ia df Sel ias yaaa 14 OiieSETECH Display Senimas VVC OW saa ok noo don did 5b oi hn 16 Nan Gamero car hn Page ssa s u S e eos 17 IUCN PPE EE SN ST Oe et Ot E EA de A A a Rd re ee Nee en eS Pen E 17 Dis Camera Seale Wrage o cece das deen ara hn b pola ad bac a dees CR ae Ui e sane 18 Space LOL Ara CLAS as O We ede a rabino ad git tara tad cn 18 Search Grid for Calendar ais sas epi ghd bakes a SS DR ads TS O ia tales 19 Modify Search Export Authenticate Samples Print and Filter Samples Icons 0 0 00 eee eee ee 19 AdVanced Search Tab z O Ts Ses rss A NI 21 Full Screen Layout Create Group ana PANES sus ited iti eee ae o Sinha eee be dbo 22 Live Pade with IZ BnaGleG MOCOS AA sa Ra Cass seas sda Gente seeds AI 22 F PZEnabled Video WiN BIZ CONTOS AD ss nad 465 Ene SE dad eee eh Rvs EA eb ieee aa a EE E E 23 lens GOntrels On PESO TOS dD ea b Gildan A et Matti da EA a Cobh ciate deis 23 Direcuonal Controls on FIZ Contos Abs tbt ad ha b a AERE bates Spade 24 PRES U a hu ej SON PIA ONO a sai E aia ias 24 List of Tables A B C3674M 11 08 ENE AOC ICONS casein ts rd ag teem aad os te eee al seit A hn caw thes 14 s Stoja o ete Call ES e garras di ai auteur O RCA 25 3 Description DS ControlPoint is a revolutionary graphical user interface tha
12. Dicamos 18D1CAMOS 1BD1CAMOS 18D1CAM11 18D1CAM12 18D1CAM13 18D1CAM14 18D1CAM15 18D1CAM15 18D1CAM20 18D1CAM22 18D1CAM24 18D1CAM27 18D1CAM28 18D1CAM29 18D1CAM30 18D1CAM32 00000000000000006 Tours Y CNA OC 1 EEES a PELLO What do you want to set up Select items to configure gt Manage Systems Add remove connect to or disconnect from Integral Systems gt Time Format Select a Time Format that you will use for entering data and viewing video The current format is Greenwich Mean Time GMT gt Create New Tour Create a camera tour gt Check for Software Update Check for software updates for this product through the Internet gt About About DS ControlPoint Figure 5 Setup Page 10 x C3674M 11 08 MANAGE SYSTEMS When you click Manage Systems the Connection Management screen appears refer to Figure 6 This page allows you to add and connect to systems It also displays information about all DVMS systems configured on the client computer DS ControlPoint Pl Tdo Setup In Setup mode you can configure the Connection Management systems that you want to connect to From this page you can manage your list of systems and select which systems you want to work with Groups Connected Auto Name IP Address DVR DP Favorite Category a dsnvr 10 220 210 113 Pure Pwnage 4 Pure Pwnage 3 Pure Pwnage 2 Pure Pwnage 1
13. O P E R A T I O NWN by Schneider Electric Integral Digital Sentry DS ControlPoint O es INTEGRAL k Digital Sentry C3674M 11 08 Contents DESCHOUON a sateen bite oer tk Cepek SRS a aa Wey SS RA A NN 4 DS Conto OME OVE EW ta tk a Spm ie ticles o uty Bid ate oo bee eal ata 5 VS CW Osesp S tere o gee Maat a Reiko hea eeu DO Deut we Mapas te ava RR Matinee eet ate a eae des 6 A A teach A A eee tame Me a E tian eae ata gas te a 8 Manage STE MS A E teks A tert E E Dao di fa tei ene ae 9 EMO CE dls kon nd k a a o b fo NS o ia o r E 10 NVOURING POIS brit Cede Sd deinen u doo Ed o ih hon ds 11 Era SHIN VNU ees aca cet tay tc ws cates SD ca r ted el cite A o aes ete ec 11 alt nes glo Fause a ToU ss santa Sao ee ae Tete in eke ads O hs teem ae WA a at oars Ie ee ee Ra Se ee 12 IN NA s a in tare at een ce ere VD tt e aha hee de tasa ie dona 13 Camera Gross ss ont achat ines Sect omen tne id a a a acl bug ap cr oda 14 Vdeo VIMO OW DOJE zat da been Mas ve a ad Bees O CA AS AE o pu 14 Ue SORE CIM ac hes cet aa Beare DA ado deeb o ace a a o tha ay Na R dO hn ay Do 14 OE TNC VICI na ls a cua Bint cn ro patos A SS sae Stat DT as eae 15 FAR WIGCONVINGOWSS seus ico eve ied shila is ii o 15 ag AO USINAS aa hn A a a RA 15 Pemovingi deo Mom GMINA ada wee oe LES es EE T ET LTA 15 Enanle DIGA ZOO a aspas lr E Sd Se i ste teh nn po Go pe dh eco a a oc a bo 15 Manage OSD Sets ri ie bitch bob ad AA ds a ci 16 DEC
14. ages click Print IMAGE ADJUSTMENTS To adjust the brightness and contrast of displayed video 1 Select one or more windows that are currently displaying video 2 Click the Image Adjustments icon E or right click the windows and select Image Adjustments from the menu This opens the Image Adjustments tab 3 Using the slider adjust the brightness and contrast of the desired video You can also select the Inverse check box to display a negative of the video 4 When finished click Apply REMOVING VIDEO FROM A WINDOW To stop and remove video from one of the configuration windows click in the desired window to highlight it with a yellow border and then click the Remove icon x You can also right click in the desired window and select Remove from the menu ENABLE DIGITAL ZOOM The Enable Digital Zoom feature allows you to zoom in and out of an area in the selected video window the window surrounded by a yellow border To zoom perform the following steps 1 Click the Enable Digital Zoom icon E 2 Position the mouse pointer over the area of the video you want to zoom 3 Use the mouse wheel to zoom in and out 4 Click the Enable Digital Zoom icon a second time to end zooming and return to the default view C3674M 11 08 15 MANAGE OSD SETTINGS To display text in a video window click the Manage OSD Settings icon Ry or right click the window and select Manage OSD Settings from the menu This opens the On Screen Displ
15. and IP3701H Series EH1500 Series enclosures Spectra IV products including Spectra IV IP Camclosure Series IS ICS IP integrated camera systems DX Series digital video recorders DVR5100 Series digital video recorders Digital Sentry Series hardware products DVX Series digital video recorders and NVR300 Series network video recorders Endura Series distributed network based video products Genex Series products multiplexers server and keyboard PMCL200 300 400 Series LCD monitors e lwo years Standard motorized or fixed focal length lenses DF5 DF8 Series fixed dome products Legacy Series integrated positioning systems Spectra III Spectra Mini Spectra Mini IP Esprit ExSite and PS20 scanners including when used in continuous motion applications Esprit Ti and 112500 Series thermal imaging products Esprit and WW5700 Series window wiper excluding wiper blades CM6700 CM6800 CM9700 Series matrix Digital Light Processing DLP displays except lamp and color wheel The lamp and color wheel will be covered for a period of 90 days The air filter is not covered under warranty Intelli M elDC controllers e One year Video cassette recorders VCRs except video heads Video heads will be covered for a period of six months e Six months All pan and tilts scanners or preset lenses used in continuous motion applications preset scan t
16. ant to identify the system as a favorite that can be sorted at the top of the system list with other favorite systems select the Favorite check box If the system is a DVMS video recorder select the Video Recorder check box If the system Is configured for transactional data such as video analytics or data from other sources such as cash registers or ATMs select the DataPoint Server check box When configuration of the system is complete click OK to add it to the list of configured systems on the Connection Management page Repeat these steps for each system SYSTEM LIST The list of configured systems on the Connection Management page can be sorted by clicking any column title The following columns are included Connected Indicates whether the system is connected green disconnected red or attempting connection yellow Auto Indicates that the system is configured for automatic connection when DS ControlPoint starts Name Lists the name entered for the system during configuration IP Address Lists the IP address or host name entered for the system during configuration DVR Indicates that the system was identified as a video recorder during configuration DP Indicates that the system was identified as a DataPoint Server during configuration Favorite Indicates that the system was identified as a favorite system during configuration Category Lists the optional category entered for the system during configuration To
17. arch result complete the following steps 1 Click the Export icon refer to Figure 22 2 On the Export tab select Video and click Next 3 Select the file type for the export and click Next You can select AVI one camera only XPA or EXE self extracting executable 4 Type a file name select the location where you want to save the file and click Next 5 Select the cameras containing the video you want to export and then click Next 6 Use the status bar slider to select the beginning of the search result that you want to export and then click Next 7 Use the status bar slider to select the end of the search result that you want to export and then click Next C3674M 11 08 19 For single image export complete the following steps 1 2 3 Click the Export icon Select Image and click Next Use the status bar slider to display the image Select Include Video Text Overlay and Best Fit if desired Click OK to display the Save As window Type a file name select the location where you want to save the file and click Save AUTHENTICATE SAMPLES To verify that the video displayed has not been corrupted click the Authenticate Samples icon refer to Figure 22 on page 19 A progress bar indicates how much time is required to complete the authentication To end the process before it is complete click Cancel FILTER SAMPLES To search for video that displays only motion or alarm click the Filter Samples icon E select M
18. ay Settings window refer to Figure 16 The On Screen Display Settings window allows you to configure text items displayed in video windows t Manage On Screen Display Settings i oj xj On Screen Display Settings Select an OSD item in the image window The Font and Color tabs allow you to change the item s display properties Reposition the OSD item by dragging it to a new location OSD items can be enabled or disabled by selecting or deselecting them from the list on the Items tab Items Font Color Enabled Items O active alert O Frame Number Camera Name O Frame Rate O Frame Size Frame Size vg Frame Time GMT O Frame Time local O DataPoint Data O Frame Time server O Event Text O Generic Text 1 1 Frame Date GMT LO Generic Text 2 O Frame Date local O Generic Text 3 Frame Dat Frame Time GMT O Frame Date server video Borders Figure 16 On Screen Display Settings Window NOTE Many of the text options available on the Items tab have different functions based on their definitions on the server generating the information The Items tab allows you to select the text that you want to display for example camera names Active Alert ellipses and counters When you select a text item It appears in the video window Click the item and drag it to any location in the window The Font tab allows you to change the text font Select the text item in the video window enter a Font Size and
19. camera into the drop zone to create the layout of this tour item Enter a dwell time and name for the item When you are finished click the Save button to accept your changes Tour Item Name New Tour Item Dwell Time sec drag item here drag item here 30 drag item here drag item here 11 31 14 AM Figure 11 Opened Add Tour Item Tab Type a name for the first tour item in the Tour Item Name text box In the Dwell Time text box type the amount of time in seconds that you want the tour item to be displayed select the Systems section of the navigation pane and expand the tree until you see the cameras and other sources that you want to include in the tour Drag and drop the cameras or sources into the video windows on the Add Tour Item tab 7 When the tour item is configured as desired click Save 8 To add additional tour items click Add Tour Item and repeat steps 3 6 Run and Pause a Tour To run a tour 1 Select the Tours section of the navigation pane 2 Right click the tour name and select Run from the menu To pause and resume a tour 1 Click the Pause Tour icon refer to Figure 12 2 Click the Resume Tour icon Alternatively select the Tour tab right click the tour name and select Run from the menu Figure 12 Resume Tour and Pause Tour Icons C3674M 11 08 Live The Live page allows you to view live video in any of 22 video window configurations To
20. cessary repeat these steps until video or data from all desired PTZ enabled cameras are displayed in the video windows ENABLE AND DISABLE PTZ The Enable PTZ feature allows you to use your mouse to control the pan tilt and zoom functionality of a PTZ camera To enable PTZ perform the following steps 1 Click the Enable PTZ icon D The icon turns red 2 Position the mouse pointer on the video then and click and hold the left mouse button until the pointer changes to an arrow Move the mouse to pan and tilt the camera which changes the view as the camera moves 3 To zoom the camera move the mouse pointer until it changes to a spyglass Then click and hold the mouse button to zoom in spyglass and out spyglass 4 To disable PTZ click the red PTZ icon D 22 C3674M 11 08 PTZ CONTROLS Click the PTZ Controls icon a to display the PTZ Control tab below the PTZ video frame refer to Figure 26 The PTZ Controls tab provides tools for more precise control of the PTZ enabled cameras currently displaying video live 3 en o Bt soi 8h 79 AE Camera 1 M Preset Name Presetl Add Update Delete Figure 26 PTZ Enabled Video with PTZ Controls Tab CAMERA LENS Lens controls adjust the zoom focus and iris of PTZ enabled cameras refer to Figure 27 Figure 27 Lens Controls on PTZ Controls Tab To control the zoom focus and iris e Zoom Click the plus and minus
21. choose a video window configuration click the Layout icon refer to Figure 13 and select the configuration from the menu To close the configuration menu press the lt Esc gt key BH ld amp Figure 13 Full Screen Layout Create Group and Print Icons To view video or data in a video window 1 select the Systems section of the navigation pane and expand the tree until you see the appropriate camera 2 Drag and drop the camera or device name into any of the video windows refer to Figure 14 NOTE When you drag a DataPoint device into a video window a menu appears that allows you to select a data format to display The data format options vary depending on the type of device selected 3 Repeat these steps until video or data from all the desired cameras and devices Is displayed in the video windows JDS ControlPoint a OQ RU Groups BA ia Live 6 In Live mode you can watch live sources of data E O 1BD1CAM24 2ebicam27 O BDICAM25 O 2ebicam2s 18D1cam30 1BD1CAM32 a O gt D un pa SQA 952 SQA 953 SQA 954 SQA 955 SQA 956 SQA 957 SQA 958 SQA 959 SQA 9510 SQA 9511 SQA 9512 SQA 9513 SQA 9514 SQA 9515 SQA 9516 ae ee 0 0 e 4 444 446 4 4 RecorderNotifications Bi Tours Search Setup tive Systems tHe S ONZA 1B8D1CAM O 3 4 14 2008 43 21326 156 PM 26 156 PM j oc
22. connect to a system click the Connect icon refer to Figure 8 or right click the system name and then select Connect from the list To edit the information about a system click the Edit System icon or right click the system name and then select Edit System from the list To delete a system from the list click the Delete System icon or right click the system name and then select Delete system from the list OPurL Figure 8 Connect Add System Edit System and Delete System Icons NOTE The Edit System and Delete System functions are available only for systems that are not currently connected Select Disconnect before editing or deleting a system C3674M 11 08 WORKING WITH TOURS Create a New Tour To create a tour of cameras 1 On the main Setup page refer to Figure 5 on page 8 click Create New Tour to open the Edit Tour page Alternatively you can right click the Tour button on the navigation pane The Edit Tour page refer to Figure 9 allows you to configure an automated tour of cameras DS ControlPoint E i 77 Live Systems Setup In Setup mode you can configure the systems that you want fo connect to Edit Tour Use this page to view modify the items in a tour Tours are groups of streams cameras audio channels or data channels which are displayed for a set period of time specified by dwell time Groups Item Name Dwell Time Rename Enter a name for the tour
23. creen similar to Figure 4 appears o DS ControlPoint fel u Live bl bee Setup In Setup mode you can configure the Connection Management systems that you want fo connect to From this page you can manage your list of systems and select which systems you want to work with Connected Auto Name IP Address DVR DP Y dsnvr dsnwr Y Me Favorite Category E 10 1 1 2 B Figure 4 ControlPoint Connection Management Screen C3674M 11 08 Setup The Setup page refer to Figure 5 contains the following buttons when the setup icon top left corner is clicked e Manage Systems Allows you to add remove and connect to DVMS systems and Pelco DX Series video recorders NOTE The user login and password for any video recorder using ControlPoint must be the same as the ControlPoint user login and password e Time Format Allows you to view the current time as GMT the local time on the client computer or the local time on the server e Create New Tour Allows you create automated tours of camera views e Check for Software Update Allows you to download any updates to DS ControlPoint e About Displays the DS ControlPoint version number and other version information Jos ControlPoint AOS v Setup In Setup mode you can configure the systems that you want to connect to Grou ps a I DS 1000 a 1ebicamoz 1ebicamoz ispicamos teDicamos i8
24. curred on Camera 1BDICAMOS at 10 12 2007 8 33 45 4 ended on Camera 1BD4CAMOS at 10 12 2007 8 33 30 PP ended on Camera 207 at 10 12 2007 8 33 31 PM occurred on Camera 1BD1CAMO08 at 10 12 2007 8 33 47 occurred on Camera 1BD2CAMOS at 10 12 2007 8 33 48 occurred on Camera 1BD4CAMOS at 10 12 2007 8 33 52 occurred on Camera 1BD2CAMOS at 10 12 2007 8 33 54 ended on Camera 1BDICAMOS at 10 12 2007 8 33 44 PP ended on Camera 15D1CAMOS at 10 12 2007 8 33 47 PP ended on Camera 158D1CAMO8 at 10 12 2007 8 33 50 PP ended on Camera 1BDICAMOS at 10 12 2007 8 33 52 PP ended on Camera 1BD2CAMOS at 10 12 2007 8 33 53 P ended on Camera 18D4CAMO8 at 10 12 2007 8 33 57 Pr ended on Camera 15D2CAMO8 at 10 12 2007 8 33 59 PP occurred on Camera 207 at 10 12 2007 8 36 08 PM ended on Camera 207 at 10 12 2007 8 36 13 PM occurred on Camera 207 at 10 12 2007 8 47 50 PM 7 4 14 2008 ts 3 31 26 156 PM Create Group Select a name for the new group Group Name 11 34 48 AM Figure 14 Live Page Note f the device placed into a video window is a PTZ camera refer to PTZ Cameras on page 22 for information on controlling the features for pan tilt zoom C3674M 11 08 13 Clicking any one of the video windows causes all of the Live page icons to appear refer to Table A Table A Live Page Icons Full Screen mer ES Enable Digital Zo
25. d video from the selected cameras and time range is played back starting from the beginning of the increment The status bar in the Modify Search Modify your search criteria Update the start and end times of your search and then click Update to update the search Start Time 4 14 2008 3 01 39 PM x Using Greenwich Mean Time GMT End Time 4 14 2008 3 31 39 PM Figure 17 Non DS Camera Search Page bottom right corner of the screen indicates the progress of the video You can control the video playback parameters with the Playback Bar The Playback Bar located at the top of the screen consists of nine buttons refer to Figure 18 To view the function of a button place your mouse pointer over the button Also click the status bar or drag the slider left or right to quickly move through the video NOTE The function of the scrubbing playback slider is different for DS and DX products For DS products video continuously changes in the 9 Y Y Y Y Y O O 6 Figure 18 Playback Bar e eee video frame as the slider is moved For DX products the video does not visibly change as the slider is moved Once the slider has stopped moving the video will change to match the stopping point of the slider C3674M 11 08 If the video of a DS camera is to be searched and a DS camera has been selected and dropped into one of the video panes the Search page will look similar to that shown in Figure 19 DS ControlP
26. ed Search Tab Associated Video icon or right click the result and select View Associated Video from the menu NOTE The options available in the drop down menus vary widely depending on your device configuration For information about configuring devices refer to the manufacturer s documentation C3674M 11 08 Ei 11 58 14 AM 21 PTZ Cameras ControlPoint provides features for pan tilt zoom PTZ cameras that allow you to control and configure PTZ enabled cameras by way of presets through the viewing area NOTE To control PTZ functions on Digital Sentry systems when connected through DS ControlPoint you must be assigned the Configuration Manager permission This permission must be assigned using DS Admin for more information refer to the Integral Digital Sentry Operation Configuration manual C3661M To view video or data from a PTZ camera in a video window 1 From the Live page click the Layout icon refer to Figure 24 and select the configuration from the menu To close the configuration menu press the lt Esc gt key BH ld sa Figure 24 Full Screen Layout Create Group and Print Icons 2 Select the Systems section of the navigation pane and expand the tree until you see the appropriate PTZ enabled camera 3 Drag and drop the camera name into a window The PTZ icons appear with the displayed video refer to Figure 25 a 12 03 46 PM Figure 25 Live Page with PTZ Enabled Video 4 If ne
27. egarding the warranty of a product that does not fall under the warranty conditions stated above please include a written explanation with the product when returned Method of return shipment shall be the same or equal to the method by which the item was received by Pelco RETURNS To expedite parts returned for repair or credit please call Pelco at 800 289 9100 or 559 292 1981 to obtain an authorization number CA number if returned for credit and RA number if returned for repair and designated return location All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid 11 11 08 Green The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002 95 EC REVISION HISTORY Manual Date Comments C3674M 10 08 Original version Pelco the Pelco logo Camclosure Digital Sentry Endura Esprit ExSite Genex Intelli M Legacy and Spectra are registered trademarks of Pelco Inc Spectra Ill is a trademark of Pelco Inc DLP is a registered trademark of Texas Instruments Incorporated Copyright 2008 Pelco Inc All rights reserved MELLO by Schneider Electric www pelco com Pelco Inc Worldwide Headquarters 3500 Pelco Way Clovis California 93612 USA USA 8 Canada Tel 800 289 9100 Fax
28. is button to save the preset name and number to a view Preset Names Click this button to configure a name to a specified number for a desired view If a name has already been assigned to a number the name appears in this box Add Update Click this button to change configured preset information camera view preset name and number Preset Name 1 Presetl Set Add Update Figure 29 Preset Controls on PTZ Controls Tab To configure and call up camera presets 1 2 d 4 D Use the directional buttons to move the camera to the view you want to save as a preset Type a name for the preset for example Preset 1 in the Preset Names box Use the up and down arrows to display the desired number for the Preset Name Click the Set button to save the preset name and number to the desired view Click the Call button to move the camera to the predesignated view PRESET FAVORITES Click the Preset Favorites icon m to display a list of the saved Preset Names and their corresponding numbers Click the icon a second time to close the window 24 C3674M 11 08 Appendix CONTROLPOINT FEATURE SET FOR DS AND DX SERIES PRODUCTS Table B Supported Feature Set 7 of 2 supponreDreaTune ser O s osovo xa Logom to sine st pe Logom o mate st AI Getcameranames oo d e y e d e Same user login from multiple clients PP Live Single and multiple cameras III View OSD items camera name time ete 0 o e o e A
29. oin A B o Searc 2 Live Systems Search 2 E a In Search mode you can search for data that occurred in the past Groups NST Hallway ReitmanNVs E DigitalSentry Server drag item here Engingering Printer Office UT RecorderNotifications drag item here drag item here Modify Search Enter your search criteria Enter the start and end times of your search and then click Next to perform the search 6 12 2008 10 33 52 PM Br Using Local Time 6 12 2008 6 12 2008 6 12 2008 6 13 2008 6 13 2008 12 00 PM 4 00 PM 8 00 PM pri ad da nl vd id bi 4 00 AM 8 00 AM J Cc ia a da 10 04 19 AM Figure 19 DS Camera Search Page Perform the following steps to search recorded video on a DS camera 1 Click the Search icon to open the Modify Search tab 2 Drag and drop a DS camera from the navigation pane into a video window 3 Use the search grid for DS cameras refer to Figure 20 Modify Search Enter your search criteria Enter the start and end times of your search and then click Next to perform the search 6 12 2008 10 33 52 PM Ey Using Local Time 6 12 2008 6 12 2008 6 12 2008 6 13 2008 6 13 2008 6 13 2008 200 PM 4 00 PM 8 00 PM 12 00 AM PEI A REA 4 00 AM 8 00 AM MA A Figure 20 Search Grid for DS Cameras C3674M 11 08 The search grid for DS cameras refer to Figure 20 on page 18 is a representation of video frames A maximum of 40
30. om CAMERA GROUPS Any combination of cameras In a video window configuration can be saved as a camera group To save and view cameras as a camera group 1 Drop the cameras into the video windows and click the Create Group icon The Create Group tab allows you to save a combination of cameras In the video windows 2 On the Create Group tab refer to Figure 15 enter a name for the group in the Group Name text box and click Save The camera group now appears in the Groups section of the navigation pane under Local Groups 3 To view the camera group right click on the camera group name In the tree and select View Live from the menu Alternatively you can click and drag the group name into the video windows NOTE Camera groups configured directly on the system also appear in the Groups section of the navigation pane They can be found in the system Groups portion of the tree Create Group Select a name for the new group Group Name Figure 15 Create Group Tab VIDEO WINDOW BORDERS Video windows displaying video that is currently being recorded are surrounded by colored borders which indicate the current recording mode time lapse green motion blue or alarm red When you click a video window to modify it the window is also surrounded by a yellow border FULL SCREEN Clicking the Full Screen icon pad enlarges the configuration window to full screen mode the video configuration now occupies the entire viewing
31. otion or Alarm and then click OK ADVANCED SEARCH DS DataPoint DS DataPoint is an application integrated with DS ControlPoint that allows you to receive and analyze transactional data such as video analytics and information from devices such as cash registers and ATMs 20 NOTE To use DataPoint you must be connected to an DVMS with DataPoint software installed When you add the system using ControlPoint you must select the DataPoint Server check box All systems identified as DataPoint Servers contain a DataPoint icon in the DP column of the Connection Management page To run an advanced search complete the following steps 1 Select the Search icon and click the Advanced Search button This opens the Advanced Search Setup window refer to Figure 23 on page 21 The Advanced Search tab allows you to search for data and video from integrated devices or video analytics events Drag a data channel from the navigation pane into the output window This opens a tab related to the type of data channe selected e For Active Alert searches enter a time date range event time event type and camera name Enter a severity range whether you want alarmed events an object type and zone information e For Fastlane scale searches enter a time date range and then select a series of occurrences To do this click the Any option beside each desired parameter and select a transaction Then click the equal sign and select an operator Click
32. our and auto scan modes Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products Pelco s liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products In no event will Pelco be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Pelco or otherwise The above warranty provides the Dealer with specific legal rights The Dealer may also have additional rights which are subject to variation from state to state If a warranty repair is required the Dealer must contact Pelco at 800 289 9100 or 559 292 1981 to obtain a Repair Authorization number RA and provide the following information 1 Model and serial number 2 Date of shipment P O number sales order number or Pelco invoice number 3 Details of the defect or problem If there is a dispute r
33. pdate procedure 2 3 Launch double click the setup file the welcome screen appears Click the Next button Click the Install button on the Ready to Install the Program screen When the installation is complete a DS ControlPoint startup icon appears on the desktop and the installation program closes Click the DS ControlPoint icon on the desktop to launch DS ControlPoint ControlPoint NOTE A user name and password prompt does not appear when DS ControlPoint is initially launched e Ifthis is the first time DS ControlPoint has been installed on the machine the Setup screen similar to Figure 3 appears DS ControlPoint Sele Live Systems AOS o 28 Setup In Setup mode you can configure the What do you want to set up systems that you want to connect to Select items to configure gt Manage Systems Add remove connect to or disconnect from your Systems gt Time Format Select a Time Format that you will use for entering data and viewing video The current format is Local Time Eastern Daylight Time Groups gt Create New Tour Create a camera tour gt Check for Software Update Check for software updates for this product through the Internet gt About About DS ControlPoint 6 33 26 PM Figure 3 ControlPoint Setup Screen C3674M 11 08 If the installation is an upgrade on the machine the ControlPoint Connection Management s
34. sible regardless of the page displayed The navigation pane contains the following sections e Groups Contains groups of DVMS systems e Systems Allows you to view all cameras and other sources associated with all connected DVMS systems e Tours Allows you to create and run automated tours of camera views The navigation pane allows you to view camera groups camera names and configured tours You can minimize the navigation pane by clicking the left arrow button this hides the entire pane except for the four page icons To view the entire pane again click the right arrow button hos o Setup In Setup mode you can configure the systems that you want to connect to Groups 8 DS 1000 Pi 1BD1CAMO2 1BD1CAMO3 1BD1CAMO4 1BD1CAMOS 1BD1CAMO6 1BD1CAMO 7 1BD1CAMOS 1BD1CAMO3 1BD1CAM11 1BD1CAM12 1BD1CAM13 1BD1CAM14 1BD1CAM15 1BD1CAM16 1BD1CAM20 1BD1CAM22 1BD1CAM24 1BD1CAM27 1BD1CAM28 1BD1CAM29 1BD1CAM30 1BD1CAM32 z EMA QC 1 Tours 6000000000000 00000000060 Figure 2 Navigation Pane for Live Page C3674M 11 08 5 Installation The DS ControlPoint installation file can be downloaded from the following Pelco Web site http www pelco com The procedure for installing the ControlPoint software is as follows 1 If the file was downloaded from the Web site unzip the downloaded file NOTE Be sure to record the location of the unzipped files as you will need these files during the u
35. t allows users to monitor and manage any combination of analog or IP devices through a common digital video security application A DS ControlPoint supported system is a video matrix solution supporting multiple monitors that allows any data output such as transaction data from a cash register or point of sale device alarm data from a video analytics application or alarm notifications to be shown in any DS ControlPoint window pane DS ControlPoint interfaces with all Integral digital video management systems DVMS to enable seamless migration from analog to IP environments DS ControlPoint also works with Pelco digital video recorders DVRs C3674M 11 08 DS ControlPoint Overview The DS ControlPoint client window consists of four major pages e Setup Allows you to manage systems and create tours e Live Allows you to view live video e Search Allows you to search for recorded video e Help Allows you to search for instructions for using DS ControlPoint Each of these sections Is accessible using the icons at the top of the navigation pane refer to Figure 1 U S Y Figure 1 Setup Live Search and Help Icons Any page can be undocked so that it can be viewed while simultaneously viewing other pages This is accomplished by clicking the Undock Tab Icon A or right click the system list and select Undock Tab from the list The navigation pane on the left side of the DS ControlPoint window refer to Figure 2 is always acces
Download Pdf Manuals
Related Search