User Manual - German
Contents
1. For reference only 1 Purchase a VESA compatible wall bracket VESA 100x100 4 holes M4 10mm 8kg 2 Locate your ideal Monitor position on the wall 3 Fix the wall bracket firmly on the wall el 4 Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Note e Please read the instructions of your specific wall bracket to properly wall mount the Monitor e The pitch of the mounting holes is 100mm horizontally and 100mm vertically e The screws type required is metric M4 10mm length e The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base For use only with UL listed wall mount bracket Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves Hanns G bears no responsibility for improper mounting or mounting that results in accident or injury You can ask a qualified service personnel about using an optional bracket to mount the Monitor to the wall User s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below 1 2 Connect one end of VGA cable to the back of the monitor and connect the other end to the computer s VGA port Connect one end of the DVI cable optional to the back of the monitor and2. Congratulations This display is designed for both you and the planet The display you have just purchased carries the TCO Certified label This ensures that your display is designed manufactured and tested according to some of the strictest quality and environmental requirements in the world This makes for a high performance product designed with the user in focus that also minimizes the impact on the climate and our natural environment TCO Certified is a third party verified program where every product model is tested by an accredited impartial test laboratory TCO Certified represents one of the toughest certifications for displays worldwide Some of the Usability features of the TCO Certified for displays e Good visual ergonomics and image quality is tested to ensure top performance and reduce sight and strain problems Important parameters are luminance contrast resolution black level gamma curve color and luminance uniformity color rendition and image stability e Product have been tested according to rigorous safety standards at an impartial laboratory e Electric and magnetic fields emissions as low as normal household background levels Low acoustic noise emissions Some of the Environmental features of the TCO Certified for displays e The brand owner demonstrates corporate social responsibility and has a certified environmental management system EMAS or ISO 14001 Very low energy consumption both in on a
3. slot Make sure monitor s video cable is properly connected to the computer Inspect monitor s video cable and make sure none of the pins are bent Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key Inspect the monitor s video cable and make sure that none of the pins are bent Adjust pixel frequency CLOCK and PHASE or press hot key i Button Adjust RGB color or select color temperature Use win 2000 ME XP Right click anywhere on desktop and select Properties gt Settings gt Screen Resolution Use the silder to adjust the reslution and click Apply Make sure PC audio output cable is connected to screen s LINE IN port or AUDIO IN port Make sure the sound volume adjustment can be clearly identified Make sure the System gt Silence option in the monitor menu is on While transferring via HDMI port but no sound is outputted it is recommended to select AUDIO 20 User s Manual INPUT as a PC option and make sure PC audio output cable is connected to monitor s LINE IN port or AUDIO IN port For HDMI Input only Addendum related to Windows 7 When you encounter display problem under Windows 7 you need to do the following 1 Make sure your PC computer Hardware requirement can support Windows 7 2 Make sure your video card can run Windows 7 3 If your
4. connect the other end to the computer s DVI port Connect one end of the HDMI to DVI cable optional to the back of the monitor and connect the other end to the computer s DVI port Connect one end of the HDMI cable optional to the back of the monitor and connect the other end to the computer s HDMI port Connect the audio cable between the monitor s audio input and the PC s audio output green port Plug one end of the AC power cord to the LCD monitor s AC input socket and the other end to Wall outlet Turn on your monitor and computer 11 User s Manual ADJUSTING THE VIEWING ANGLE e For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference e Hold the stand so you do not topple the monitor when you change the monitor s angle e You are able to adjust the monitor s angle from 5 to 15 5 15 Figure 3 Monitor Angle NOTES Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen e careful not to place fingers or hands near the hinges when tilting the monitor otherwise pinching can result User s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off The other control buttons are located on the front panel of the monitor See Figure 4 By changing these settings the picture can be adjus
5. 0 480 75Hz 37 500 75 000 7 720x400 70Hz 31 469 70 087 8 800x600 56Hz 35 156 56 250 9 800x600 60Hz 37 879 60 317 10 800 600 72Hz 48 077 72 188 800 600 75Hz 46 875 75 000 12 832 624 75Hz 49 725 75 000 13 1024x768 60Hz 48 363 60 004 14 1024x768 70Hz 56 476 70 069 15 1024x768 75Hz 60 023 75 029 16 1152x870 75Hz 68 681 75 062 17 1152x864 75Hz 67 500 75 000 18 1280x720 60Hz 45 000 60 000 19 1280x960 60Hz 60 000 60 000 20 1280x960 75Hz 74 592 74 443 21 1280x768 60Hz 47 776 59 870 22 1280x768 75Hz 60 289 74 893 23 1280x1024 60Hz 63 981 60 020 24 1280x1024 75Hz 79 976 75 025 25 1360x768 60Hz 47 712 60 015 26 1440x900 60Hz 55 469 59 901 27 1440x900 75Hz 70 635 74 984 28 1400x1050 60Hz 64 744 59 948 22 29 30 Video mode MODE 1 NYDN FW 8 1680x1050 60Hz 1920x1080 60Hz RESOLUTION 640x480p 60Hz 720x480p 60Hz 720x576p 50Hz 1280x720p 60Hz 1920x1080i 50Hz 1920x1080i 60Hz 1920x1080p 50Hz 1920x1080p 60Hz 65 290 67 500 User s Manual 59 954 60 000 We ensure that the monitor can be lighted under interlace signal mode but we can not guarantee the image quality 23 User s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 68 6cm 27 Diagonal Pixel pitch 0 311mm H 0 311mm V H Frequency 24KHz 83KHz V Frequency 56Hz 75Hz Display Colors 16 7M Colors Max Resolution 1920 x 1080 60Hz Plug amp Play VESA DDC2B ON M
6. Hanns 5G LCD Monitor HL272 HSG 1223 User s manual Bedienungsanleitung Manuel de l utilisateur Manuale dell utente Manual de usuario Manual do utilizador Gebruikshandleiding Kullan c elkitabi Podr cznik u ytkownika U ivatelsk p ru ka Felhaszn l i tmutat Eyxeipidio Manual de utilizare Priru nik za korisnike Brugervejledning Anvandarhandbok Bruksanvisning K ytt j n ohjekirja f AYoa7 hb AFM EAFA Er OSD VS 6 User s Manual OSD V5 6 Before operating the monitor please read this manual thoroughly This manual should be retained for future reference FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equi
7. PPENDIX 24 SPECIFICATIONS 24 User s Manual SAFETY NOTICE 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference 4 Only use attachments accesories specified by the manufacturer WARNING To prevent fire or shock hazard do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor Do not open the cabinet Refer servicing to qualified personnel only PRECAUTIONS Do not use the monitor near water e g near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Do not place the monitor on an unstable cart stand or table If the monitor falls it can injure a person and cause serious damage to the appliance Use only a cart or stand recommended by the manufacturer or sold with the monitor If you mount the monitor on a wall or shelf use a mounting kit approved by the manufacturer and follow the kit instructions Slots and openings in the back and bottom of the cabinet are provi
8. ation please visit www hannsg com User s Manual TABLE OF CONTENTS SAFETY NO DIC Be 6 PRECAUTIONS 6 SPECIAL NOTES ON LCD MONITORS sscsssssssssscsscscsesssnsssesseesossees 7 BEFORE YOU OPERATE THE MONITOR s csssssssssscssscsssssssssssssesssnesees 8 FEATURES 8 CHECKING THE CONTENTS OF THE PACKAGE 8 INSTALLATION INSTRUCTIONS scsccccssssscsscssssscssescssssssencssosssesssees 9 BOWE Revives 9 SETTING THE MONITOR ON THE WALL 10 MAKING CONNEC TIONS wcsscetecctecciccesccsisacdinensessivactendecesesscesssenehsatneas seed 11 ADJUSTING THE VIEWING 12 OPERATING INSTRUCTIONS sssccscsssccssscsessssccesccscctetesondeesotusosseressscesecsectvscesscsee 13 GENERAL INSTRUCTIONS 13 14 HOW ADJUST A SETTINGS 16 PLUGAND PLAY 19 TECHNICAL SUPPORT FAQ seesessesessossesessossesossossesossossesossossesossossesossossossssose 20 Q lt A FOR GENERAL PROBLEMS essesesossesesesossososossesesoseososossssesosessososos 20 ERROR MESSAGE amp POSSIBLE SOLUTIONS seseesssoesessssoesessosoesesossoe 22 A
9. d Removing the Base INSTALLATION 1 Align the monitor with the opening in the base 2 Note that the longer section of the base points forward 3 Snap the monitor into its base A clear click sound will affirm that the base is connected correctly 4 Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base REMOVAL 1 Flip over the monitor so that it is upside down 2 Press the 3 clips on the base that holds the monitor in place 3 Gently press and hold the 3 clips while pulling the base from the monitor unit they unattached POWER POWER SOURCE 1 Make sure that the power cord is the correct type required in your area 2 This LCD monitor has an Internal universal power supply that allows operation in either 100 120V AC or 220 240V AC voltage area No user adjustment is required Connect the AC power cord one end to your LCD monitor s AC input socket the other end to wall outlet User s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE 1 2 3 WALL MOUNTING THE MONITOR Disconnect all the cables and cords from the Monitor to prevent breakage Carefully place the Monitor face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the Monitor Remove the four 4 screws so that the stand base can be removed
10. ded for ventilation To ensure reliable operation of the monitor and to protect it from overheating be sure these openings are not blocked or covered Do not place the monitor on a bed sofa rug or similar surface Do not place the monitor near or over a radiator or heat register Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided The monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Unplug the unit during a lighting storm or when it will not be used for long period of time This will protect the monitor from damage due to power surges Do not overload power strips and extension cords Overloading can result in fire or electric shock Never push any object into the slot on the monitor cabinet It could short circuit parts causing a fire or electric shock Never spill liquids on the monitor Do not attempt to service the monitor by yourself opening or removing covers can expose you to dangerous voltages and other hazards Please refer all servicing to qualified service personnel The wall socket shall be installed near the equipment and shall be easily accessible User s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem Due to the nature of the fluorescent light the screen may flicker duri
11. f characters on the screen Enter the option and adjust the level For VGA only Select the PHASE option to reduce the horizontal flicker of characters on the screen Enter the option and adjust the level For VGA only Select the SHARPNESS option to adjust the sharpness of the display Set the value from 2 to 2 Choose VIDEO MODE or MODE for video transmission While using HDMI or HDMI to DVI ports for video transmission the video will appear cut off slightly around the edge choose MODE to view videos with complete image VIDEO MODE only functions for inputs from HDMI or DVI that supports HDCP video YUV format Setup the display response time through the Response time function Available settings MINIMUM INTERMEDIATE and MAXIMUM This feature is limited to specific models only Select LANGUAGE option to change the language of the OSD Enter the option and select a language Reference only the OSD Language depends on the selected model Select H POSITION option to adjust the horizontal position of the OSD Enter the option and adjust the level Select V POSITION option to adjust the vertical position of the OSD Enter the option and adjust the level Select TRANSPARENCY option to adjust the transparency of 17 User s Manual SYSTEM the OSD Enter the option and adjust the level Select OSD TIME OUT option t
12. f DDC used communicate additional information about its display capabilities The DDC2B is a bidirectional data channel based on the protocol The host can request EDID information over the DDC2B channel THIS MONITOR WILL APPEAR TO BE NON FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY THERE MUST BE A VIDEO INPUT SIGNAL User s Manual TECHNICAL SUPPORT FAQ Q amp A FOR GENERAL PROBLEMS PROBLEM amp QUESTION Power LED is not on No Plug amp Play The display is too dark or too bright Picture bounces or a wave pattern is present in the picture The power LED is ON amber but there s no video or no picture Missing one of the primary colors RED GREEN or BLUE Screen image is not centered or sized properly Picture has color defects White does not look white The screen resolution needs to be adjusted No sound is outputted from monitor s built in speaker POSSIBLE SOLUTION Check if the Power Switch is in the ON position Power Cord should be connected Check if the PC system is Plug amp Play compatible Check if the Video Card is Plug amp Play compatible Check if any plug pins on the VGA or DVI connector are bent Adjust the Contrast and Brightness Controls Move electrical devices that may cause electrical interference Computer Power Switch should be in the ON position Computer Video Card should be snugly seated in its
13. l shipping box and packing materials as they will come in handy if you ever have to ship your monitor For maximum protection repackage your monitor as it was originally packed at the factory keep the monitor looking new periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution Never use strong solvents such as thinner benzene or abrasive cleaners since these will damage the cabinet As a safety precaution always unplug the monitor before cleaning it User s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS CONTRAST INPUT SETTING COLOR SETTING IMAGE SETTING Adjust the brightness value of the display according to your preference Select BRIGHTNESS option to adjust the brightness value Adjust the contrast value of the display according to your preference Select CONTRAST option to adjust the contrast value Optimal setting for high contrast images or videos The dark and light areas of the image are automatically detected and the contrast is enhanced to provide a clearer sharper image Also you may select ACTIVE CONTRAST option Select the preset mode according to your preference PC MOVIE GAME ECO The availability of this function depends upon the selected model Select the INPUT SETTING option to change between analog VGA or Digital HDMI source Enter the option and select Anal
14. nd standby mode minimize climate impact Restrictions on chlorinated and brominated flame retardants plasticizers plastics and heavy metals such as cadmium mercury and lead ROHS compliance e Both product and product packaging is prepared for recycling e The brand owner offers take back options The requirements can be downloaded from our web site The requirements included in this label have been developed by TCO Development in co operation with scientists experts users as well as manufacturers all over the world Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user friendly direction Our labeling system started with displays in 1992 and is now requested by users IT manufacturers all over the world About 50 of all displays worldwide are TCO certified For more information please visit www tcodevelopment com User s Manual RECYCLING INFORMATION We the Hanns G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life These devices contain recyclable materials which can be re decomposed and re integrated into brand new marvels On the contrary other material can be classified to hazardous and poisoned substances We strongly encourage you to contact the provided information to recycle this product For more inform
15. ng initial use Turn off the Power Switch and then turn it on again to make sure the flicker disappears e You may find slightly uneven brightness on the screen depending on the desktop pattern you use The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less such as a missing pixel or a pixel lit all of the time e Due to the nature of the LCD screen an afterimage of the previous screen may remain after switching the image when the same image is displayed for hours In this case the screen is recovered slowly by changing the image or turning off the Power Switch for hours e If the screen suddenly flashes erratically or the backlighting fails please contact your dealer or service center for repair Do not attempt to repair the monitor yourself User s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 68 6cm 27 Wide Screen TFT Color LCD Monitor Crisp Clear Display for Windows EPA ENERGY STAR GP Green Product Ergonomic Design Space Saving Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items Power Cord Warranty Card Quick Start Guide User s Manual VGA Cable Audio Cable DVI Cable HDMI to DVI Cable HDMI Cable optional optional optional User s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure 1 Installing an
16. o set the OSD time out from 10 to 100 seconds Enter the option and adjust the level To choose the color combination of the OSD window select l OSD COLOR option under OSD SETTING menu choose modes 1 2 3 While transferring via the HDMI port it is recommended to set AUDIO INPUT to HDMI if no sound is outputted it is recommended to select AUDIO INPUT as PC and make sure the PC audio output cable is connected to monitor s LINE IN or AUDIO IN port For HDMI Input only Select the VOLUME joption to change the volume level Enter the option and adjust the level This function applies only to models with incorporated audio By high volume risk of hearing damage exists Select the MUTE option to switch the function On or Off The availability of this function depends upon the selected model Adjusting the volume while muted cancels Mute mode Select the DDC CI option to switch the function On or Off Dual input mode optional Select the FACTORY RESET option to reset to the monitor s default setting This will erase the current settings Enter the option and select On or Off Display Horizontal frequency Vertical frequency Resolution information 18 User s Manual PLUG AND PLAY Plug amp Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows the monitor to inform the host system of its identity and depending on the level o
17. ode 40W Typical Power consumption Power Saving Mode lt 1W OFF Mode lt 0 5W Audio output Rated Power 2 0 W rms Per channel VGA Input Terminal DVI optional HDMI 1 optional Hor 597 6mm Maximum Screen Size Ver 336 15mm Power Source 100 240V 1 0A 50 60Hz Operating 5 to 35 C Envi o Storage Temp 20 to 60 C Operating Humidity 20 to 85 635 6 W x437 0 H x219 8 D mm Dimensions 25 0 W x17 2 8 7 D Weight NW 4 5 kg 9 9 1b The above specification is subject to actual product specification and is subject to change without prior notice NOTES The Maximum Resolution will depends on the display card supporting Related issue can refer to www hannsg com FAQ section 24
18. og or Digital Dual input mode optional From the Signal Selection menu select the AUTO SEARCH option to activate or deactivate the automatic signal search function For DVI HDMI Input only Adjust the color temperature value of the display according to your preference WARM NATURE COOL Move the cursor to the User option and select it 1 To adjust the red enter R option and adjust the level 2 To adjust the green enter option and adjust the level 3 To adjust the blue enter the option and adjust the level The auto adjustment function is used to optimize the V POSITION CLOCK j and PHASE For VGA Input only When the aspect ratio of screen is distorted you may make adjustments by using this function FULL indicates full screen 16 User s Manual display which does not ensure the image is shown as is or in initial scale FIT jindicates scaling by the proportion of original images which may cause the screen showing black bands The availability of this function depends upon the selected model Select the H POSITION option to shift the screen image to the left or right Enter the option and adjust the level For VGA only Select the V POSITION option to shift the screen image up down Enter the option and adjust the level For VGA only Select the CLOCK option to reduce the vertical flicker o
19. pment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The device complies with Parts 15 of the FCC Rule Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operations CANADA This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulation This device complies with requirement of EMC directive 2004 108 EC with regard to Electromagnetic Compatibility and 73 23 EEC and 93 68 EEC with regard to Low Voltage directive Socket outlet shall be near the equipment and shall be accessible Trademark Notice Hanns G products incorporate High Definition Multimedia Interface HDMI technology HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries User s Manual
20. ted to your personal preferences e The power cord should be connected e Connect the Signal cable from the monitor to the VGA card e Press the power button to turn on the monitor The power indicator will light up Digital Input Models Figure 4 Control Panel Buttons User s Manual FRONT PANEL CONTROL Power Button Press this button to switch ON OFF of monitor s power Power Indicator Green Power On mode Amber Power Saving mode MENU RETURN Turn the OSD menu on off or return to the previous menu Adjust 1 Adjust Brightness and volume when the OSD is off 2 Navigate through adjustment icons when OSD is ON or adjust a function when function is activated Button Analog Input Models 1 The OSD menu is used as confirmation function during start up 2 The Auto adjustment function works only for VGA input The auto adjustment function is used to optimize the horizontal position vertical position clock and phase Button Digital Input Models 1 Press i to enter Source selections Selections include VGA HDMI etc The actual selections may very depending on the models This function is only available in models with digital inputs 2 The OSD menu is used as confirmation function during start up 3 Press and hold this button more than seconds will start Auto Adjust function when using VGA input only The auto adjustment func
21. tion is used to optimize the horizontal position vertical position clock and_ phase Hotkeys 1 Restore Brightness and Contrast defaults To reset both the Brightness and Contrast to their default values press the A Jand V keys at the same time 2 ASPECT RATIO Press MENU key to change to FIT MODE 3 Change Resolution For similar screen display resolutions see table below the screen resolution can be changed by pressing the MENU A button to achieve the optimal display quality 4 Change Preset Mode Press MENU key for 3 seconds to select one of the following modes MOVIE GAME ECO Default is User s Manual 640x400 70Hz 720x400 70Hz 640x400 85Hz gt 720x400 85Hz 640x480 60Hz 720x480 60Hz 1024x768 70Hz gt 1280x768 70Hz 1280x768 60Hz 1360x768 60Hz 1400x1050 60Hz gt 1680x1050 60Hz 1400x1050 RB 60Hz gt 1680x1050 RB 60Hz 1400x1050 75Hz 1680x1050 75Hz 1440x900 60Hz 1600x900 60Hz 1360x768 60Hz lt 1366x768 60Hz 1280x960 60Hz gt 1600x900 60Hz The screen resolutions available will depend on the purchased model NOTES e Do not install the monitor in a location near heat sources such as radiators or air dusts or in a place subject to direct sunlight or excessive dust or mechanical vibration or shock e Save the origina
22. video card can support Windows 7 need to install the latest Win 7 driver of your video card Suggest to do the following 1 Install the latest Windows 7 video driver of your video card 2 Try to use the recommended display resolution that is supported by the monitor 3 If the recommended display resolution is not working try the second recommended display resolution e ee ee aes 54 6cm 21 5 16 9 58 4cm 23 16 9 60cm 23 6 16 9 1920x1080 60Hz 1920x1080 50Hz 62 5cm 24 6 16 9 68 6cm 27 16 9 70cm 27 5 16 10 1920x1200 60Hz 1920x1200 50Hz And if you still have display problem after doing the above procedure please visit Hanns G support and Service Website http www hannsg com Windows is a registered trademark of Microsoft Corporation 21 User s Manual ERROR MESSAGE amp POSSIBLE SOLUTIONS CABLE NOT CONNECTED 1 Check that the signal cable is properly connected if the connector is loose tighten the connector s screws 2 Check the signal cable s connection pins for damage INPUT NOT SUPPORT Your computer has been set to unsuitable display mode set the computer to display mode given in the following table FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL FREQUENCY KHz FREQUENCY Hz 1 640x400 70Hz 31 469 70 087 2 640x480 60Hz 31 469 59 940 3 640x480 70Hz 36 052 70 004 4 640x480 67Hz 35 000 66 667 5 640x480 72Hz 37 861 72 809 6 64
Download Pdf Manuals
Related Search