Home

User manual - Bellman & Symfon

image

Contents

1. Check that the correct signal source has when Maxi is switched on been selected e g internal microphone M position For further information about the product in English refer to the Appendix External sound source input2 5mmtele 10 Tone control fg jack 11 Low battery LED 2 Internal microphone 12 Headphone output 3 5 mm tele jack 3 Microphone LED 13 Neck strap attachment 4 Telecoil LED 14 Battery compartment 5 On Off button h 15 Setting button 6 Microphone Selection Button a 16 Battery cover lock 7 Telecoil Selection Button d 17 Battery cover 8 Volume and Tone LED Indicator 18 Clip 9 Volume control bc
2. Indicator 8 are illuminated By pressing the b button 9 the volume is reduced by one increment at a time until the mini mum volume is reached although Maxi never becomes totally silent At minimum volume only the left LED of the Volume and Tone LED Indicator 8 is illuminated 17 Tone control BE2020 has a digital tone control fg 10 which means that you can increase or reduce the treble with the pushbuttons fg 10 Each press results in an increase or reduction in treble by one increment If you hold one of the tone buttons down for more than 1 second the treble will increase or reduce by one increment per second as long as the button is held down or until the minimum or maximum position is reached By pressing the g button 10 the treble is increased by one increment at a time until maxi mum treble is reached At maximum treble the LED at the far right of the Volume and Tone LED Indicator 8 is illuminated By pressing the f button 10 the treble is reduced by one increment at a time until minimum treble is reached At minimum treble the LED at the far left of the Volume and Tone LED Indicator 8 is illuminated When the centre LED of the Volume and Tone LED Indicator 8 is illuminated treble is deac tivated Troubleshooting in brief Nothing happens when you try to start Maxi Change the batteries Only use AA alka using the On Off button line type batteries No sound can be heard in the headphones e
3. 14 Bellman Audio Maxi Digital Communication Aid BE2020 Thank you for choosing products from Bellman amp Symfon Bellman Audio is an assistive listening system The system consists of a number of units which facilitate listening under different circumstances Bellman Audio products make everyday life easier for many people and give them the freedom to freely pursue their interests Read through the entire user manual first before starting to use the product Refer to the diagram showing the accessories and connection options on the inside of the cover Getting started Unpacking installing and testing the unit 1 Open the battery cover 17 by pressing the battery cover lock 16 in the direction of the ar row Fit the batteries and make sure they have been inserted the right way round Follow the markings in the battery compartment 14 Only use AA alkaline type batteries Do not use force to press down the batteries Close the battery cover 17 and check that the lock 16 locks with a click 2 Connect BE9122 Bellman Headphones BE9128 Bellman Neck Loop BE9125 Bellman Stetoclip BE9124 Bellman Ear Phones or another product recommended by Bellman amp Symfon to the green headphone output 12 on the right hand side 3 Give one short press on the On Off button h 5 to start Maxi The LEDs 3 and 4 above the Microphone selection button a 6 and the Telecoil selection button d 7 will blink while Maxi starts Maxi always s
4. buttons a 6 and d 7 on the front When switching between these the volume control will be set to a low level to avoid unpleasant sound levels e If something is connected to the external sound source input Maxi automatically selects this When you remove it Maxi is automatically connected to the internal microphone M position External sound source If the user connects an audio cable accessory BE9126 between the red 2 5 mm tele jack and a sound source SCART connector hi fi equipment MP3 player etc this sound source is selected instead The input sensitivity is automatically adjusted to adjust the signal strength to these sound sources The internal microphone 2 is switched off in this position Combined signal sources When you have connected a sound source to the External sound source input 1 this sound source can be combined with the sound that the internal microphone 2 receives This is done by holding down the a button 6 The sound from the sound source connected to the External sound source input 1 is reduced and the internal microphone is connected so that you can for example perceive sound or con verse with somebody else The Microphone LED 3 blinks while the button is held down 16 When you want to return to listening to the signal source connected to the External sound source input 1 release the a button 6 The internal microphone is then disconnected and the external sound source returns to nor
5. gnal source because this can cause powerful inductive feedback Feedback together with a high sound level can cause discomfort or in serious cases endanger your hearing Warning The Bellman Audio Maxi digital communication aid uses AA alkaline type batteries Do not expose batteries to fire or direct sunlight Function The BE2020 Bellman Audio Maxi Digital Communication Aid is a digital amplifier which has been specifically developed to provide an exceptional sound experience even in demanding situ ations Maxi works extremely well for speech and music with the built in microphone with an external microphone accessory or with other external sound sources Built in microphone E The built in microphone 2 is located under the rubber cap on the top of the front panel The microphone is an omnidirectional one Telecoil The built in telecoil is angled at 45 degrees in order to catch inductive signals from an inductive loop in both the horizontal position in the hand or on a table and vertical position on a clip or neck strap The T position can be used in premises where an inductive loop or hearing loop has been fitted Look for the inductive loop symbol or ask staff whether there is an st T inductive loop if you are unsure Selecting the signal source It is easy to select the sound source The user can manually choose between the internal microphone M position or built in telecoil T position by pressing the
6. mal volume again Clip N S Q Place the clip against the battery cover and press firmly so that it locks on Remove the clip by using the small round handles and pressing out from the sides Indicators and settings Volume and Tone LED Indicator The Volume and Tone LED Indicator 8 is used as an indicator for the volume and tone con trols The Volume and Tone LED Indicator goes out after about 3 seconds to save power Low battery LED The Low battery LED 11 is normally off but comes on when the battery level falls below about 10 hours remaining operating time This time depends of course on the sound volume and type of listening accessories used When the Low battery LED 11 blinks every seven seconds the batteries should be replaced with new ones Only use AA alkaline type batteries Volume control Maxi has a digital volume control bc 9 which means that you can increase or reduce the volume with the pushbuttons bc 9 Each press results in an increase or reduction in volume by one increment If you hold one of the volume buttons down for more than 1 second the volume will increase or reduce by one increment per second as long as the button is held down or until the minimum or maximum position is reached By pressing the c button 9 the volume is increased by one increment at a time until the maxi mum volume is reached At full volume all the LEDs of the Volume and Tone LED
7. tarts with the internal microphone 2 selected as a sound source In addition the volume control is always set to low volume to avoid unpleasant sound levels Use the volume control bc 9 to control the sound level c increases and b reduces the volume The Volume and Tone LED Indicator 8 shows the sound level The more LEDs that are lit the higher the volume The LED indicator goes out 3 seconds after the sound volume has been set Use the tone control fg 10 to adjust the sound quality g increases and f reduces the treble The Volume and Tone LED Indicator 8 shows the tone setting The LED indicator goes out 3 seconds after the sound quality has been set When you have finished you can switch off Maxi by giving a short press on the On Off button h 5 Please note The BE2020 Bellman Audio Maxi digital communication aid is not a hearing instrument Bellman amp Symfon AB recommend that anyone who is experiencing hearing loss should consult a doctor Warning The BE2020 Bellman Audio Maxi digital communication aid has a very powerful amplifier and the sound level can cause discomfort or in serious cases endanger hearing if the product is used carelessly Always turn the volume down to a low level before putting on the head phones Warning If the BE2020 Bellman Audio Maxi digital communication aid is used together with a neck loop e g BE9128 accessory the inductive loop T position should not be selected as a 15 si

Download Pdf Manuals

image

Related Search

Related Contents

Transformateurs De Distribution  Phoenix™ English NMIC/ID Panel= = Phoenix Français Galerie    1439-1オレンジ取扱説明書  Gericht Entscheidungsdatum Geschäftszahl Spruch Text  Manual de usuario de la herramienta GenXML para la generación  Sun Fire V880z Server and Sun XVR  1.7 Useful Features  4PLS Manual - Hobbico Brands  Cypress CYV15G0101EQ User's Manual  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.