Manual - KanexPro
Contents
1. 1 x Power Adapter DC 12V 2A selectable 1 x User Manual VV VV ON ON WV kamexPro WP HDBASETX Notes Please confirm if the product and the accessories are all included if not please contact your dealer 2 Panel Description 2 1 Front Panel 9 No Name Description Power Illuminates red when power on indicator v Used as video source selection button with backlight off Press to select one source press again to select next source switching circularly between HDMI and VGA The indicator of the selected input source will illuminate green SOURCE Used as switching mode selection button with backlight AUTO on Press and hold for 3 seconds or more to enter in Auto switching mode the indicator illuminates green when in auto switching mode Press and hold for 3 seconds or more again to enter in Manual switching mode Serial port 3 pin pluggable terminal block connects with the control terminal to control the Wall plate Tx supports bi directional RS232 control send control signal from local or receive control signal sent from far end devices EE VGA IN Connect with VGA source device RS232 kamexPro WP HDBASETX The indicator v Illuminates yellow when there is VGA signal input v Illuminates green when the signal source is chosen as input source v Turn off when there is no VGA input signal Connect with the audio output socket of VGA source device AUDIO IN deliver synchronous audio2. ranges 503xx Contrast xx from 00 to 99 kamexPro WP HDBASETX Set the saturation to xx XX ranges 504 Saturation rom 00 to Set the sharpness to xx XX ranges 505xx Sharpness xx from 00 to 99 50606 Auto adjust the input parameter VGA Input Auto Color Temperature xx xx 50607 Adjust the color temperature can be medium warm user or cool Aspect Ratio can be 50608 Set the aspect ratio 16 9 4 3 or auto Picture Mode xx xx can be 50614 Set the picture mode dynamic standard mild or user 50699 Check the system version Version 07797 Switch to 5232 mode 1 enable RS232 Mode 1 RS232 scaler to control far end devices Control Scaler amp Remote 07607 Switch to RS232 mode 2 enable RS232 Mode 2 RS232 amp far end devices to control scaler Remote Control Scaler Set the HDCP status of HDMI input 50790 HDCP Active socket to Active Set the HDCP status of HDMI input 50791 HDCP On socket to On Set the HDCP status of HDMI input 50792 HDCP Off socket to Off kamexPro WP HDBASETX HDCP On HDCP Active 50635 Check the image aspect ratio 50678 Enable screen output adjusting Enter Output Position Adjust 50679 Disable screen output adjusting Exit Output Position Adjust 50670 Move the image to left Output Position Adjust X xx 50671 Move the image to right Output Position Adjust X xx 50672 Move the image up Output Position Adjust Y xx 50673 M
3. source with VGA signal source when choosing VGA as source signal Connect with HDMI source device HDMI IN The indicator will illuminate yellow when there is VGA signal input and illuminate green when the signal source is chosen as input source v LINK Twisted Pair Link status indicator illuminate green LINK when successfully connected amp HDCP v HDCP HDCP compliance indicator illuminate green when the source signals is with HDCP turn off when not RESET Press the button to reboot Wall plate transmitter USB port used for firmware update 9 FIRMWARE Plug a flash disk or other storage device with update file MERGE bin and send command 50698 to update firmware 2 2 Side Panel HDBaseT OUT RJ45 port connect with receiver via a CAT5e 6 cable to deliver Audio Video signals support PoC Note The Wall Plate supports unidirectional PoC i e far end receiver can energize it but it can t energize far end receiver 2 3 Rear Panel kamexPro WP HDBASETX O o 170 180H NI 204 Description me in port 2 pin pluggable terminal block connect with DC Power In 12V power adapter Power out port connect with WP CONTROLS B Wall plates to Power Out Wa energize it with a 12V power output Serial port connects with a far end receiver supports mes bi directional RS232 control send control signal from local or receive control signal sent from far end devices Note Pictures shown in this manual are for
4. 0P 576P 576i 480P 480i 1080P x 60M PoC Distance 4Kx2K x 40M PoC HDMI Standard Support HDMI1 4 and HDCP Power Supply DC 12V 2A 9 6W kamexPro WP HDBASETX Humidity 10 90 Decora style two gang Dimension W H D 104 5 x 89 x 44 mm Weight 0 29Kg 6 Panel Drawing 88 72 mm LINK HDCP VGA lt om VGAIN AUDIO IN HDMI 1NO NI 20d SOURCE AUTO 68 90 mm 104 22 mm FIRMWARE HDMI IN 7 Troubleshooting amp Maintenance The connecting cables may Check whether the cables Color losing or no video signal output in HDMI display No HDMI signal output in the device while local HDMI input is in normal working state Output image with snowflake POWER indicator doesn t work or no respond to any operation Cannot control the device by control device e g a PC through RS232 port Static becomes stronger when connecting the video connectors Cannot be controlled through RS232 port or front panel buttons not be connected correctly or it may be broken Loose or failed power cord connection Wrong RS232 communication parameters Bad grounding The unit may have already been broken are connected correctly and in working condition Ensure the power cord connection is good Make sure the RS232 communication parameters are correct Check the grounding and make sure it is connecte
5. ANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS THIS LIMITED WARRANTY GIVES CUSTOMERS SPECIFIC LEGAL RIGHTS CUSTOMERS MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION D NO LIABILITY FOR DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL KANEX BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING WITHOUT LIMITATION SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES FOR PERSONAL INJURY LOSS OF BUSINESS PROFITS BUSINESS INTERRRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT EVEN IF KANEX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES kamexPro Brea California KanexPro com MPN WP HDBASETX HDMI are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Kanex is a trademark of Apogee Inc registered in the U S
6. P HDBASETX has a 12V power output port on the rear panel Connect the 12V power output port of WP HDBASETX to the power port of Control panel wall plate refer to the following figure our device is capable of energizing these wall plate control panels 3 4 PoE Solution The Wall Plate has an HDBaseT OUTPUT port on the rear panel which can extend HDMI VGA signals up to 60m Meanwhile it also supports PoE which allows several terminals share the same power supply and eliminates the need for extra power supply at the remote nodes Connect a DC 24V power adapter to the power port of HDBASE70POER WP HDBASETX can be energized synchronously with PoE solution see the picture below 3 5 Application This Wall plate TX has a good application in various occasions such as computer realm monitoring conference room big screen displaying television education command 4 control center and smart home etc 4 Operations 4 1 Operations of front panel buttons The WP HDBASETX has a channel switching button on the front panel through which users can switch input source signals It supports both manual switching and auto switching Default Auto switching Press and hold the switching button for 3 seconds or send command 50770 and 5077140 to switch between the two modes Switching modes gt Auto switching mode In this mode the indicator will illuminates green and WP HDBASETX will recognize the last connected source device
7. as input source automatically Disconnect the present source device it will deliver the other source signal if there is input signal on the other source gt Manual switching mode In this mode the indicator will remain off Press the switching button to select input source it will switch circularly between HDMI and VGA Or switch it by sending kamexPro WP HDBASETX RS232 commands The indicator of the selected input source will illuminate green 4 2 RS232 Control As RS232 can be transmitted bi directionally between the wall plate and receiver HDBASE70POER so it is able to control a third party RS232 device from local or control the wall plate from remote When controlling a third party RS232 device the baud rate of this device should be 2400 4800 9600 19200 38400 57600 or 115200 4 2 1 Installation uninstallation of RS232 Control Software Installation Copy the control software file to the computer connected with WP HDBASETX Uninstallation Delete all the control software files in corresponding file path 4 2 2 Basic Settings First connect WP HDBASETX with all input devices and output devices needed then to connect it with a computer that is installed with RS232 control software Double click the software icon to run this software Here we take the software CommWatch exe as example The icon is showed as below Comm atch exe The interface of the control software is showed as below Parameter Configurat
8. d well Send it to authorized dealer for repairing If your problem persists after following the above troubleshooting steps seek further help from authorized dealer or our technical support at 888 975 1368 8 After sales Service If there appear some problems when running TPHD405PT WPB please check and deal with the problems reference to this user manual Any transport costs are borne by the users during the warranty 1 Product Limited Warranty PTN warrants that its products will be free from defects in materials and workmanship for three years which starts from the first day you buy this product The purchase invoice shall prevail Proof of purchase in the form of a bill of sale or receipted invoice that is evidence that the unit is within the Warranty period must be presented to obtain warranty service 2 What the warranty does not cover Warranty expiration Factory applied serial number has been altered or removed from the product Damage deterioration or malfunction caused by Normal wear and tear Use of supplies or parts not meeting our specifications No certificate or invoice as the proof of warranty The product model showed on the warranty card does not match with the model of the product for repairing or had been altered Damage caused by force majeure Servicing not authorized by KanexPro Any other causes which does not relate to a product defect Delivery installation or labor char
9. double gang wall box to provide a convenient interface for HDMI VGA input sources It has 1 HDMI IN 1 VGA IN and 1 HDBaseT OUT with PoC It supports VGA with full HD scaler and HDMI 1 4 with 4k amp 3D input signals support auto switching and manual switching The HDBaseT output supports 60m UHD video transmission with PoC enables bi directional RS232 communication between the wall plate transmitter and remote device With its PoC solution a far end PoC receiver can power the Wall plate Tx 1 2 Features Selectable HDMI VGA with audio input Support VGA output resolution up to 1920x1200 High bandwidth 10 2Gbps Built in scaler function support scaling HDMI VGA signals to match the native resolution of the display Transmit HDMI signals up to 4K UHD Compliant with HDMI 1 4 support 1080p amp 3D HDCP compliance equipped with HDCP auto tracking solution Provides auto switching capability Support multiple control methods including front panel buttons and RS232 support bi directional RS232 pass through control Supports firmware upgrading via USB Power up WP Control Wall Plates with a DC 12V power output Powered by local power pack or PoC connection up to 60m Aluminum design for cooling mechanism 6 3 Package List 1 x WP HDBASETX 4 x Screws for Wall plate 3 x Pluggable Terminal Blocks 1 2 pin block 1 3 pin block and 1 4 pin block 1 x Face Plate Selectable 4 x Screws for the face plate
10. ges for installation or setup of the product 3 Technical Support Email to our after sales department or make a call please inform us the following information about your cases Product version and name Detailed failure situations The formation of the cases Remarks For any questions or problems please try to get help from your local distributor or AV Dealer or Reps first 9 Warranty KanexPro TM warrants that a its products the Product will perform greatly in agreement with the accompanying written materials for a period of 36 months from the date of receipt 3 years and b that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years B CUSTOMER REMEDIES KanexPro s entire liability and Customer s exclusive remedy shall be at KanexPro option either return of the price paid for the product or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of customers receipt This Limited Warranty is void if failure of the Product has resulted from accident abuse or misapplication Any replacement Product will be warranted for the remainder of the original warranty period of 3 years whichever is longer C NO OTHER WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW KANEX DISCLAIMS ALL OTHER WARRANTIES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARR
11. ion area Monitoring area indicates if the command sent works kamexPro WP HDBASETX UART SerialPort Test Tool V1 0 HIIP WEE SL PORT 1 BaudR 3600 Parity pN one v Byte E Stop 1 Clear Save To File Hex View Stop View Clear View New Line Hex Send Mode Auto Send Interval 1000 ms Counter Reset Clear 2013 05 08 14 03 35 Send 0 Receive 0 Please set the parameters of COM number baud rate data bit stop bit and the parity bit correctly and then you are able to send command in Command Sending Area kamexPro WP HDBASETX 4 2 3 RS232 Communication Commands Communication protocol RS232 Communication Protocol Baud rate 9600 Data bit 8 Stop bit 1 Parity bit none Switch Commands Resolution Commands Change the resolution to 1360X768 50619 Resolution 1360x768 HD Change the resolution to 1024X768 50626 Resolution 1024x768 XGA Change the resolution to 1280X720 50627 Resolution 1280x720 720P Change the resolution to 1280X800 50628 Resolution 1280x800 WXGA Change the resolution to 1920X1080 50629 Resolution 1920x1080 1080P Change the resolution to1920X1200 50620 Resolution 1920x1200 WUXGA Change the resolution to1600X1200 50621 iron Resolution 1600x1200 Setup Commands Set the brightness to xx XX ranges 502 Brightness from 00 to 99 Set the contrast to xx XX
12. is aa Fora GA GS 1 1 cU SS a X 1 Ege EIS 1 2 Panel Description T TT 2 A BG COMM ANY AA APAPAP 2 2 AA AA 3 ROI ANN APR MAA AA 3 2 SUE Sede Nana 4 Del USAGE FP FECAUTIONS T 4 3 2 System Diagram Error Bookmark not defined 3 9 Connection Procedure aan n go eina e Aaah 4 3 4 Energizing WPG E 6 3 POC SOO d wR 6 BO ADDICAIOM seisis RET UT 6 Me O NAA mt 6 4 1 Operations of front panel buttons a 6 AA R2 OU Ol MR T aren PAA AA AA AG 7 4 2 1 Installation uninstallation of RS232 Control Software 7 4 2 2 BASIC 7 4 2 3 RS232 Communication Commands sess 9 PS CINICALON m 12 ie I gt AA AA AA AA 13 7 Troubleshooting amp Maintenance 717000777 1 8 After sales s uci cetera se tele comit odes Bina kA SALO EGO HG ha Doc donde E LI II I ILC ed 2 kamexPro WP HDBASETX 1 Introduction 1 1 Introduction to WP HDBASETX The WP HDBASETX is a Decora style transmitter that installs in a
13. kamexPro WP HDBASETX WP HDBASETX Wall Plate HDBaseT Transmitter with Built in HD Scaler 4 E Tex i x 2 o gt oon Og 24v LT Rul be 129 POWER RS232 POWER Y N GUT s 6 una t imr i V All Rights Reserved Version WP HDBASETX 2014v1 0 KanexPrs WP HDBASETX SAFETY PRECAUTIONS To insure the best from the product please read all instructions carefully before using the device Save this manual for further reference Unpack the equipment carefully and save the original box and packing material for possible future shipment Follow basic safety precautions to reduce the risk of fire electrical shock and injury to persons Do not dismantle the housing or modify the module It may result in electrical shock or burn Using supplies or parts not meeting the products specifications may cause damage deterioration or malfunction Refer all servicing to qualified service personnel To prevent fire or shock hazard do not expose the unit to rain moisture or install this product near water Do not put any heavy items on the extension cable in case of extrusion Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards Install the device in a place with fine ventilation to avoid damage caused by overheat Keep the module away from
14. liquids Spillage into the housing may result in fire electrical shock or equipment damage If an object or liquid falls or spills on to the housing unplug the module immediately Do not twist or pull by force ends of the optical cable It can cause malfunction Do not use liquid or aerosol cleaners to clean this unit Always unplug the power to the device before cleaning Unplug the power cord when left unused for a long period of time Information on disposal for scrapped devices do not burn or mix with general household waste please treat them as normal electrical wastes kamexPro WP HDBASETX NOTICE Please read this manual carefully before using this product Pictures shown in this manual are for reference only different model and specifications are subject to real product This manual is for operation instruction only not for any maintenance usage The functions described in this version are updated till August 2014 Any changes of functions and parameters since then will be informed separately Please refer to the dealers for the latest details This manual is copyright PTN Electronics Limited All rights reserved No part of this publication may be copied or reproduced without the prior written consent of PTN Electronics Limited All product function is valid till 2014 08 14 kamexPro WP HDBASETX Contents pei PT RM 1 1 1 Introduction to WP HDBASE IX arri iar tant
15. ove the image down Output Position Adjust Y xx Stretch left from left side increase 50674 Output Width Adjust image width Pull right from left side decrease 50675 Output Width Adjust image width Stretch upwards from bottom side 50676 Output Height Adjust decrease image height Stretch downwards from bottom side ESSE utput Hel ust Xx increase image height gt EDID Commands 50772 EDID bypass mode 50773 EDID 1080P amp PCM 2ch 50774 EDID 1080P85 1ch 50775 EDID 1080P3d amp 5 1ch 50776 EDID 1080i amp PCM 2ch 50777 EDID 4K amp PCM 2ch 5067 as kamexPro WP HDBASETX EDID 1080P amp PCM 2ch EDID 1080P amp 5 1ch EDID 1080P3D amp 5 1ch EDID 4K amp PCM 2ch 50778 Check EDID data 50799 Program EDID file send EDID data Waiting for EDID within 10 within 10s seconds Note 1 2 Commands with grey background are for VGA sources only EDID commands are for HDMI sources only 5 Specification Audio Input Input Signal 1 HDMI 1 VGA 1 AUDIO 1 RS232 1 19 pin Type A HDMI female 1 15 pin VGA 1 3 5mm Connector stereo jack 1 3 pin pluggable terminal block Output Output Signal 1 HDBaseT Connector 1 RJ45 Transmission Mode HDBaseT 20Hz 20KHz Response SNR gt 85db 20Hz 20KHz VGA 800 x600 1024 x 768 1280 x 800 1280 x 1024 9 1440 x 900 1600 x 1200 1920 x 1080 1920 x 1200 HDMI 4Kx2K 1080p 3D 1080P HD 1080i 72
16. reference only different model and specifications are subject to real product 3 System Connection 3 1 Usage Precautions 1 System should be installed in a clean environment and has a prop temperature and humidity 2 All of the power switches plugs sockets and power cords should be insulated and safe 3 All devices should be connected before power on 3 2 Connection Procedure Step1 Connect HDMI source device e g Blue ray DVD to HDMI input ports of the Wall plate TX with HDMI cable Connect a VGA source device e g PC to the VGA kamexPro WP HDBASETX input port of the Wall Plate Tx with a VGA cable Step2 Connect a receiver HDBASE70POER to the HDBaseT port on the rear panel with twisted pair Step3 Connect a HDMI display to the HDMI OUT port of Receiver Step4 Connect a control terminal to the RS232 port on the front panel of receiver Step5 Connect control device e g PC to RS232 port of the wall plate Tx or receiver bi directional RS232 control either is available Step6 Connect DC 24V power adaptor to the power port of receiver the wall plate will be able to get power from receiver with PoE solution Note This Wall Plate supports unidirectional PoE i e the WP HDBASETX can get power from far end PoE devices with PoE function while it can t energize far end PoE devices when the power supply is connected to the Wall Plate Tx kamexPro WP HDBASETX 3 3 Energizing WP CONTROLS OR WP CONTROLB W
Download Pdf Manuals
Related Search