Home
        User Manual
         Contents
1.  The light   s numerous  functions are selected according to the depth the switch is pressed    To switch ON  Press the switch all the way down until a click is heard    To switch OFF  Press the switch all the way down once again to switch the light off and enter standby  mode    Standby Mode    When in standby mode  press the switch halfway to activate the blue power indicator to flash once every  three seconds  thus helping users locate the MH20 in dark conditions  Press the switch halfway again to  turn the power indicator off  When using 1x18650 battery  the MH20 will operate for over 12 months with  the power indicator on  or remain standby for over 24 months with the power indicator off    NOTE  When MH20 is transported or left unused for extended periods  Nitecore recommends loosening  the head to lock out and cut off power  thus saving battery power and preventing accidental activation of  the flashlight     MH20 User Manual       Brightness Levels   With the MH20 switched on  press the switch halfway repeatedly to cycle through the following  brightness levels  ultra low  low  medium  high and turbo  Alternatively  press and hold the switch  halfway for over one second to enter turbo output directly     Direct Access to Ultra low Turbo   With the light switched off  press and hold the switch halfway for over one second to access  ultra low output  1 lumen     With the light switched off  press and hold the switch all the way down for over one second to  access turbo 
2.  and  can be recharged   Yes  Compatible but can  ent  NOT be recharged   Rechargeable Li ion battery    RCR123 3 7V Yes  Compatible but can    NOT be recharged     A  Warning  Charge 18650 rechargeable Li ion batteries only  Do not charge  CR123 or RCR123 batteries     Primary Lithium battery         Output  amp  Runtime    FL1 STANDARD TURBO HIGH MID L    OW    i 1000 410 50  LUMENS LUMENS LUMENS LUMENS    220m  Beam Distance     NOTICE    The stated data has been  measured in accordance  with the international  flashlight testing standards  ANSI NEMA FL1  using 1  x Nitecore 18650 battery   3 7V  2600mAh  or 2 x  Nitecore CR123 batteries   3V  1700mAh  under  laboratory conditions  The  data may vary in  real world use due to  different battery use or  environmental conditions     A  neg  ezruoxzi osos   TS    12500cd  Peak Beam Intensity     1 5m  Impact Resistant     y  S    IPX 8  2m  Waterproof AND Submersible        SF    Operating Instructions    Battery installation   Insert 1x18650 battery or 2xCR123 batteries as  illustrated    NOTE  After loading batteries  the blue power  indicator will blink to indicate battery voltage   Please refer to the    Power Tips    section of this  manual for details    WARNING    Ensure batteries are inserted with the positive      ends pointing towards the head  The MH20 will not  be operational with incorrectly inserted batteries        On   Off Operation   NOTE  The MH20 utilizes a 2 stage switch similar to a camera shutter button 
3.  the blue power indicator will blink 4 times   followed by a one second pause and another 2 blinks  Different voltages represent the  corresponding remaining battery power levels     Low Power Full Power  18650 x 1   3 5V 3 7V 3 9V 4 2V  Low Power Full Power  CR123 x2   4 8V 5 6V 6 0V 6 4V    ATR Technology    Advanced temperature regulation  ATR  technology allows the MH20 to dynamically adjust output  performance according to its body temperature  This prevents damage from overheating and  prolongs its working life     Changing   Charging Battery  Batteries should be replaced or recharged when output appears to be dim or the flashlight  becomes unresponsive     Maintenance    Every 6 months  threads should be wiped with a clean cloth followed by a thin coating of  silicon based lubricant     Warranty Service  All NITECORE   products are warranted for quality  Any defective   malfunctioning NITECORE    product can be repaired free of charge for a period of 60 months  5 years  from the date of  purchase  Beyond 60 months  5 years   a limited warranty applies  covering the cost of labor and  maintenance  but not the cost of accessories or replacement parts   The warranty is nullified in all of the following situations   1  The product s  is are broken down  reconstructed and or modified by unauthorized   parties   2  The product s  is are damaged through improper use   3  The product s  is are damaged by leakage of batteries   For the latest information on NITECORE   products 
4. NITECORE      The All Round Flashlight Expert       Features      The smallest  lightest 1x18650 USB rechargeable flashlight     Utilizes a CREE XM L2 U2 LED     Max output of up to 1000 lumens      Integrated    Precision Digital Optics Technology    provides extreme reflector performance    Boasts a peak beam intensity of 12 500 cd and a throw distance of up to 220 meters   Features advanced temperature regulation  ATR  technology      Innovative single button 2 stage switch accesses multiple functions and modes     Integrated power indicator notifies battery voltage  accurate to 0 1V      Intelligent charging module with a micro USB port charges Li ion battery rapidly     High efficiency constant current circuit enables maximum runtime of 235 hours     Direct access to ultra low and turbo output      Detachable two way anti rolling clip     Toughened ultra clear mineral glass with anti reflective coating      Constructed from aero grade aluminum alloy    HAIII military grade hard anodized     Waterproof in accordance with IPX 8  2 meters submersible       Impact resistant to 1 5 meters     Tail stand capability    Accessories    USB cable  quality holster  clip  lanyard   spare USB port cover  spare O ring    Dimensions   Length  4 13     105mm    Head diameter  1 25     31 8mm    Tail diameter  1     25 4mm    Weight  3 080z  87 3gram   without battery     Battery Options    TYPE Nominal voltage Compatible    18650 Rechargeable Li ion battery   18650 3 7V Yes  Recommended
5. and services  please contact a local  NITECORE   distributor or send an email to service nitecore com    All images  text and statements specified herein this user manual are for reference purpose only   Should any discrepancy occurs between this manual and information specified on  www nitecore com  information on our official website shall prevail  Sysmax Industry Co   Ltd   reserves the rights to interpret and amend the content of this document at any time without prior  notice     7SYSMAX ina J  gy esse ind us on facebook     NITECORE Flashlight  SYSMAX Industry Co   Ltd  ae ee as    TEL   86 20 83862000   FAX   86 20 83882723 C       E mail  info nitecore com   Web  www nitecore com   Address  Rm1401 03  Glorious Tower  850 East Dongfeng Road     et  Guangzhou  China 510600  a    20150902    Thanks for purchasing NITECORE     
6. output  1000 lumens      Special Modes  Strobe Location Beacon SOS    With the light switched on  press and hold the switch all the way down for more than one second to  enter strobe mode  When in strobe mode  press the switch halfway repeatedly to cycle through  SOS  Location Beacon and Strobe modes  To exit  simply press the switch all the way down to turn  the light off  The MH20 does not have memory effect in any of these special modes    NOTE  When in location beacon or SOS modes  press and hold the switch halfway for over one  second will access strobe mode directly     Charging Function    The MH20 is capable of charging a 18650 Li ion battery with the included USB charging cable   Connect the USB cable to the MH20 s charging port and a power source  USB chargers  PC or  other power terminals  as shown in the adjacent image  Fully charging one depleted 18650 battery  takes approximately 6 hours    Under normal charging conditions  the blue power indicator light will blink twice every three    seconds to notify users  When charging is complete  the blue  power indicator will illuminate steadily    If a problem is detected during the charging process  the MH20  will stop charging and the blue power indicator will blink rapidly   This is usually caused by faulty or incorrectly inserted batteries        Power Tips    After battery installation  the blue power indicator will blink to indicate battery voltage  accurate to  0 1V   For example  when battery voltage is at 4 2V 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Comment utiliser l`imagination dans la création littéraire?  Sistema de Soldagem Orbital  User Guide 9.0 vol. 2_Advanced Features.book - Support  Jabra SPEAK™ 410  Samsung MW0113M User Manual  QAD Mode l`emploi - Portail des Pouvoirs locaux  Windmere CM-1400P Use & Care Manual      Copyright © All rights reserved. 
   Failed to retrieve file